linux/fs/f2fs/super.c

5095 lines
132 KiB

mm: introduce memalloc_retry_wait() Various places in the kernel - largely in filesystems - respond to a memory allocation failure by looping around and re-trying. Some of these cannot conveniently use __GFP_NOFAIL, for reasons such as: - a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on - a need to check for the process being signalled between failures - the possibility that other recovery actions could be performed - the allocation is quite deep in support code, and passing down an extra flag to say if __GFP_NOFAIL is wanted would be clumsy. Many of these currently use congestion_wait() which (in almost all cases) simply waits the given timeout - congestion isn't tracked for most devices. It isn't clear what the best delay is for loops, but it is clear that the various filesystems shouldn't be responsible for choosing a timeout. This patch introduces memalloc_retry_wait() with takes on that responsibility. Code that wants to retry a memory allocation can call this function passing the GFP flags that were used. It will wait however is appropriate. For now, it only considers __GFP_NORETRY and whatever gfpflags_allow_blocking() tests. If blocking is allowed without __GFP_NORETRY, then alloc_page either made some reclaim progress, or waited for a while, before failing. So there is no need for much further waiting. memalloc_retry_wait() will wait until the current jiffie ends. If this condition is not met, then alloc_page() won't have waited much if at all. In that case memalloc_retry_wait() waits about 200ms. This is the delay that most current loops uses. linux/sched/mm.h needs to be included in some files now, but linux/backing-dev.h does not. Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <chao@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 14:07:14 -08:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: dynamically allocate the f2fs-shrinker Use new APIs to dynamically allocate the f2fs-shrinker. Link: https://lkml.kernel.org/r/20230911094444.68966-8-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Chao Yu <chao@kernel.org> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 17:44:06 +08:00
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 09:00:42 +09:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 21:14:49 +08:00
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 08:15:43 +08:00
f2fs: add block_age-based extent cache This patch introduces a runtime hot/cold data separation method for f2fs, in order to improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates. Enhanced hot/cold data separation can record data block update frequency as "age" of the extent per inode, and take use of the age info to indicate better temperature type for data block allocation: - It records total data blocks allocated since mount; - When file extent has been updated, it calculate the count of data blocks allocated since last update as the age of the extent; - Before the data block allocated, it searches for the age info and chooses the suitable segment for allocation. Test and result: - Prepare: create about 30000 files * 3% for cold files (with cold file extension like .apk, from 3M to 10M) * 50% for warm files (with random file extension like .FcDxq, from 1K to 4M) * 47% for hot files (with hot file extension like .db, from 1K to 256K) - create(5%)/random update(90%)/delete(5%) the files * total write amount is about 70G * fsync will be called for .db files, and buffered write will be used for other files The storage of test device is large enough(128G) so that it will not switch to SSR mode during the test. Benefit: dirty segment count increment reduce about 14% - before: Dirty +21110 - after: Dirty +18286 Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com> Signed-off-by: xiongping1 <xiongping1@xiaomi.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-01 17:37:15 -08:00
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 16:32:50 -07:00
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 09:00:42 +09:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 21:14:49 +08:00
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 08:15:43 +08:00
f2fs: add block_age-based extent cache This patch introduces a runtime hot/cold data separation method for f2fs, in order to improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates. Enhanced hot/cold data separation can record data block update frequency as "age" of the extent per inode, and take use of the age info to indicate better temperature type for data block allocation: - It records total data blocks allocated since mount; - When file extent has been updated, it calculate the count of data blocks allocated since last update as the age of the extent; - Before the data block allocated, it searches for the age info and chooses the suitable segment for allocation. Test and result: - Prepare: create about 30000 files * 3% for cold files (with cold file extension like .apk, from 3M to 10M) * 50% for warm files (with random file extension like .FcDxq, from 1K to 4M) * 47% for hot files (with hot file extension like .db, from 1K to 256K) - create(5%)/random update(90%)/delete(5%) the files * total write amount is about 70G * fsync will be called for .db files, and buffered write will be used for other files The storage of test device is large enough(128G) so that it will not switch to SSR mode during the test. Benefit: dirty segment count increment reduce about 14% - before: Dirty +21110 - after: Dirty +18286 Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com> Signed-off-by: xiongping1 <xiongping1@xiaomi.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-01 17:37:15 -08:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: fix to reserve space for IO align feature https://bugzilla.kernel.org/show_bug.cgi?id=204137 With below script, we will hit panic during new segment allocation: DISK=bingo.img MOUNT_DIR=/mnt/f2fs dd if=/dev/zero of=$DISK bs=1M count=105 mkfs.f2fe -a 1 -o 19 -t 1 -z 1 -f -q $DISK mount -t f2fs $DISK $MOUNT_DIR -o "noinline_dentry,flush_merge,noextent_cache,mode=lfs,io_bits=7,fsync_mode=strict" for (( i = 0; i < 4096; i++ )); do name=`head /dev/urandom | tr -dc A-Za-z0-9 | head -c 10` mkdir $MOUNT_DIR/$name done umount $MOUNT_DIR rm $DISK --- Core dump --- Call Trace: allocate_segment_by_default+0x9d/0x100 [f2fs] f2fs_allocate_data_block+0x3c0/0x5c0 [f2fs] do_write_page+0x62/0x110 [f2fs] f2fs_outplace_write_data+0x43/0xc0 [f2fs] f2fs_do_write_data_page+0x386/0x560 [f2fs] __write_data_page+0x706/0x850 [f2fs] f2fs_write_cache_pages+0x267/0x6a0 [f2fs] f2fs_write_data_pages+0x19c/0x2e0 [f2fs] do_writepages+0x1c/0x70 __filemap_fdatawrite_range+0xaa/0xe0 filemap_fdatawrite+0x1f/0x30 f2fs_sync_dirty_inodes+0x74/0x1f0 [f2fs] block_operations+0xdc/0x350 [f2fs] f2fs_write_checkpoint+0x104/0x1150 [f2fs] f2fs_sync_fs+0xa2/0x120 [f2fs] f2fs_balance_fs_bg+0x33c/0x390 [f2fs] f2fs_write_node_pages+0x4c/0x1f0 [f2fs] do_writepages+0x1c/0x70 __writeback_single_inode+0x45/0x320 writeback_sb_inodes+0x273/0x5c0 wb_writeback+0xff/0x2e0 wb_workfn+0xa1/0x370 process_one_work+0x138/0x350 worker_thread+0x4d/0x3d0 kthread+0x109/0x140 ret_from_fork+0x25/0x30 The root cause here is, with IO alignment feature enables, in worst case, we need F2FS_IO_SIZE() free blocks space for single one 4k write due to IO alignment feature will fill dummy pages to make IO being aligned. So we will easily run out of free segments during non-inline directory's data writeback, even in process of foreground GC. In order to fix this issue, I just propose to reserve additional free space for IO alignment feature to handle worst case of free space usage ratio during FGGC. Fixes: 0a595ebaaa6b ("f2fs: support IO alignment for DATA and NODE writes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-12-11 21:27:36 +08:00
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 16:32:50 -07:00
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 16:32:50 -07:00
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 16:32:50 -07:00
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 16:32:50 -07:00
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 16:32:50 -07:00
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 16:32:50 -07:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: fix to avoid NULL pointer dereference on se->discard_map https://bugzilla.kernel.org/show_bug.cgi?id=200951 These is a NULL pointer dereference issue reported in bugzilla: Hi, in the setup there is a SATA SSD connected to a SATA-to-USB bridge. The disc is "Samsung SSD 850 PRO 256G" which supports TRIM. There are four partitions: sda1: FAT /boot sda2: F2FS / sda3: F2FS /home sda4: F2FS The bridge is ASMT1153e which uses the "uas" driver. There is no TRIM pass-through, so, when mounting it reports: mounting with "discard" option, but the device does not support discard The USB host is USB3.0 and UASP capable. It is the one on RK3399. Given this everything works fine, except there is no TRIM support. In order to enable TRIM a new UDEV rule is added [1]: /etc/udev/rules.d/10-sata-bridge-trim.rules: ACTION=="add|change", ATTRS{idVendor}=="174c", ATTRS{idProduct}=="55aa", SUBSYSTEM=="scsi_disk", ATTR{provisioning_mode}="unmap" After reboot any F2FS write hangs forever and dmesg reports: Unable to handle kernel NULL pointer dereference Also tested on a x86_64 system: works fine even with TRIM enabled. same disc same bridge different usb host controller different cpu architecture not root filesystem Regards, Vicenç. [1] Post #5 in https://bbs.archlinux.org/viewtopic.php?id=236280 Unable to handle kernel NULL pointer dereference at virtual address 000000000000003e Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000626e3122 [000000000000003e] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] SMP Modules linked in: overlay snd_soc_hdmi_codec rc_cec dw_hdmi_i2s_audio dw_hdmi_cec snd_soc_simple_card snd_soc_simple_card_utils snd_soc_rockchip_i2s rockchip_rga snd_soc_rockchip_pcm rockchipdrm videobuf2_dma_sg v4l2_mem2mem rtc_rk808 videobuf2_memops analogix_dp videobuf2_v4l2 videobuf2_common dw_hdmi dw_wdt cec rc_core videodev drm_kms_helper media drm rockchip_thermal rockchip_saradc realtek drm_panel_orientation_quirks syscopyarea sysfillrect sysimgblt fb_sys_fops dwmac_rk stmmac_platform stmmac pwm_bl squashfs loop crypto_user gpio_keys hid_kensington CPU: 5 PID: 957 Comm: nvim Not tainted 4.19.0-rc1-1-ARCH #1 Hardware name: Sapphire-RK3399 Board (DT) pstate: 00000005 (nzcv daif -PAN -UAO) pc : update_sit_entry+0x304/0x4b0 lr : update_sit_entry+0x108/0x4b0 sp : ffff00000ca13bd0 x29: ffff00000ca13bd0 x28: 000000000000003e x27: 0000000000000020 x26: 0000000000080000 x25: 0000000000000048 x24: ffff8000ebb85cf8 x23: 0000000000000253 x22: 00000000ffffffff x21: 00000000000535f2 x20: 00000000ffffffdf x19: ffff8000eb9e6800 x18: ffff8000eb9e6be8 x17: 0000000007ce6926 x16: 000000001c83ffa8 x15: 0000000000000000 x14: ffff8000f602df90 x13: 0000000000000006 x12: 0000000000000040 x11: 0000000000000228 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 00000000000535f2 x6 : ffff8000ebff3440 x5 : ffff8000ebff3440 x4 : ffff8000ebe3a6c8 x3 : 00000000ffffffff x2 : 0000000000000020 x1 : 0000000000000000 x0 : ffff8000eb9e5800 Process nvim (pid: 957, stack limit = 0x0000000063a78320) Call trace: update_sit_entry+0x304/0x4b0 f2fs_invalidate_blocks+0x98/0x140 truncate_node+0x90/0x400 f2fs_remove_inode_page+0xe8/0x340 f2fs_evict_inode+0x2b0/0x408 evict+0xe0/0x1e0 iput+0x160/0x260 do_unlinkat+0x214/0x298 __arm64_sys_unlinkat+0x3c/0x68 el0_svc_handler+0x94/0x118 el0_svc+0x8/0xc Code: f9400800 b9488400 36080140 f9400f01 (387c4820) ---[ end trace a0f21a307118c477 ]--- The reason is it is possible to enable discard flag on block queue via UDEV, but during mount, f2fs will initialize se->discard_map only if this flag is set, once the flag is set after mount, f2fs may dereference NULL pointer on se->discard_map. So this patch does below changes to fix this issue: - initialize and update se->discard_map all the time. - don't clear DISCARD option if device has no QUEUE_FLAG_DISCARD flag during mount. - don't issue small discard on zoned block device. - introduce some functions to enhance the readability. Signed-off-by: Chao Yu <yuchao0@huawei.com> Tested-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-04 03:52:17 +08:00
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 16:32:50 -07:00
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 09:00:42 +09:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 21:14:49 +08:00
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 08:15:43 +08:00
f2fs: add block_age-based extent cache This patch introduces a runtime hot/cold data separation method for f2fs, in order to improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates. Enhanced hot/cold data separation can record data block update frequency as "age" of the extent per inode, and take use of the age info to indicate better temperature type for data block allocation: - It records total data blocks allocated since mount; - When file extent has been updated, it calculate the count of data blocks allocated since last update as the age of the extent; - Before the data block allocated, it searches for the age info and chooses the suitable segment for allocation. Test and result: - Prepare: create about 30000 files * 3% for cold files (with cold file extension like .apk, from 3M to 10M) * 50% for warm files (with random file extension like .FcDxq, from 1K to 4M) * 47% for hot files (with hot file extension like .db, from 1K to 256K) - create(5%)/random update(90%)/delete(5%) the files * total write amount is about 70G * fsync will be called for .db files, and buffered write will be used for other files The storage of test device is large enough(128G) so that it will not switch to SSR mode during the test. Benefit: dirty segment count increment reduce about 14% - before: Dirty +21110 - after: Dirty +18286 Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com> Signed-off-by: xiongping1 <xiongping1@xiaomi.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-01 17:37:15 -08:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 08:15:43 +08:00
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 08:15:43 +08:00
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 08:15:43 +08:00
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
f2fs: fix to do sanity check with inode.i_inline_xattr_size As Paul Bandha reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202709 When I run the poc on the mounted f2fs img I get a buffer overflow in read_inline_xattr due to there being no sanity check on the value of i_inline_xattr_size. I created the img by just modifying the value of i_inline_xattr_size in the inode: i_name [test1.txt] i_ext: fofs:0 blkaddr:0 len:0 i_extra_isize [0x 18 : 24] i_inline_xattr_size [0x ffff : 65535] i_addr[ofs] [0x 0 : 0] mkdir /mnt/f2fs mount ./f2fs1.img /mnt/f2fs gcc poc.c -o poc ./poc int main() { int y = syscall(SYS_listxattr, "/mnt/f2fs/test1.txt", NULL, 0); printf("ret %d", y); printf("errno: %d\n", errno); } BUG: KASAN: slab-out-of-bounds in read_inline_xattr+0x18f/0x260 Read of size 262140 at addr ffff88011035efd8 by task f2fs1poc/3263 CPU: 0 PID: 3263 Comm: f2fs1poc Not tainted 4.18.0-custom #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x83/0x250 kasan_report+0x213/0x350 memcpy+0x1f/0x50 read_inline_xattr+0x18f/0x260 read_all_xattrs+0xba/0x190 f2fs_listxattr+0x9d/0x3f0 listxattr+0xb2/0xd0 path_listxattr+0x93/0xe0 do_syscall_64+0x9d/0x220 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Let's add sanity check for inode.i_inline_xattr_size during f2fs_iget() to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-04 17:19:04 +08:00
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
f2fs: cover last_disk_size update with spinlock This change solves below hangtask issue: INFO: task kworker/u16:1:58 blocked for more than 122 seconds. Not tainted 5.6.0-rc2-00590-g9983bdae4974e #11 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u16:1 D 0 58 2 0x00000000 Workqueue: writeback wb_workfn (flush-179:0) Backtrace: (__schedule) from [<c0913234>] (schedule+0x78/0xf4) (schedule) from [<c017ec74>] (rwsem_down_write_slowpath+0x24c/0x4c0) (rwsem_down_write_slowpath) from [<c0915f2c>] (down_write+0x6c/0x70) (down_write) from [<c0435b80>] (f2fs_write_single_data_page+0x608/0x7ac) (f2fs_write_single_data_page) from [<c0435fd8>] (f2fs_write_cache_pages+0x2b4/0x7c4) (f2fs_write_cache_pages) from [<c043682c>] (f2fs_write_data_pages+0x344/0x35c) (f2fs_write_data_pages) from [<c0267ee8>] (do_writepages+0x3c/0xd4) (do_writepages) from [<c0310cbc>] (__writeback_single_inode+0x44/0x454) (__writeback_single_inode) from [<c03112d0>] (writeback_sb_inodes+0x204/0x4b0) (writeback_sb_inodes) from [<c03115cc>] (__writeback_inodes_wb+0x50/0xe4) (__writeback_inodes_wb) from [<c03118f4>] (wb_writeback+0x294/0x338) (wb_writeback) from [<c0312dac>] (wb_workfn+0x35c/0x54c) (wb_workfn) from [<c014f2b8>] (process_one_work+0x214/0x544) (process_one_work) from [<c014f634>] (worker_thread+0x4c/0x574) (worker_thread) from [<c01564fc>] (kthread+0x144/0x170) (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Reported-and-tested-by: Ondřej Jirman <megi@xff.cz> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-02-27 19:30:03 +08:00
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 09:00:42 +09:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: fix to avoid broken of dnode block list f2fs recovery flow is relying on dnode block link list, it means fsynced file recovery depends on previous dnode's persistence in the list, so during fsync() we should wait on all regular inode's dnode writebacked before issuing flush. By this way, we can avoid dnode block list being broken by out-of-order IO submission due to IO scheduler or driver. Sheng Yong helps to do the test with this patch: Target:/data (f2fs, -) 64MB / 32768KB / 4KB / 8 1 / PERSIST / Index Base: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08 2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7 3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48 Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333 After: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 798.81 202.5 41143 40613.87 602.71 838.08 913.83 2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27 3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91 Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333 Patched/Original: 0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189 It looks like atomic write will suffer performance regression. I suspect that the criminal is that we forcing to wait all dnode being in storage cache before we issue PREFLUSH+FUA. BTW, will commit ("f2fs: don't need to wait for node writes for atomic write") cause the problem: we will lose data of last transaction after SPO, even if atomic write return no error: - atomic_open(); - write() P1, P2, P3; - atomic_commit(); - writeback data: P1, P2, P3; - writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing last transaction. - preflush + fua; - power-cut If we don't wait dnode writeback for atomic_write: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85 2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77 3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92 Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18 Patched/Original: 0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294 SQLite's performance recovers. Jaegeuk: "Practically, I don't see db corruption becase of this. We can excuse to lose the last transaction." Finally, we decide to keep original implementation of atomic write interface sematics that we don't wait all dnode writeback before preflush+fua submission. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 23:03:19 +08:00
f2fs: fix to drop meta_inode's page cache in f2fs_put_super() syzbot reports a kernel bug as below: F2FS-fs (loop1): detect filesystem reference count leak during umount, type: 10, count: 1 kernel BUG at fs/f2fs/super.c:1639! CPU: 0 PID: 15451 Comm: syz-executor.1 Not tainted 6.5.0-syzkaller-09338-ge0152e7481c6 #0 RIP: 0010:f2fs_put_super+0xce1/0xed0 fs/f2fs/super.c:1639 Call Trace: generic_shutdown_super+0x161/0x3c0 fs/super.c:693 kill_block_super+0x3b/0x70 fs/super.c:1646 kill_f2fs_super+0x2b7/0x3d0 fs/f2fs/super.c:4879 deactivate_locked_super+0x9a/0x170 fs/super.c:481 deactivate_super+0xde/0x100 fs/super.c:514 cleanup_mnt+0x222/0x3d0 fs/namespace.c:1254 task_work_run+0x14d/0x240 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x210/0x240 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x60 kernel/entry/common.c:296 do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd In f2fs_put_super(), it tries to do sanity check on dirty and IO reference count of f2fs, once there is any reference count leak, it will trigger panic. The root case is, during f2fs_put_super(), if there is any IO error in f2fs_wait_on_all_pages(), we missed to truncate meta_inode's page cache later, result in panic, fix this case. Fixes: 20872584b8c0 ("f2fs: fix to drop all dirty meta/node pages during umount()") Reported-by: syzbot+ebd7072191e2eddd7d6e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000a14f020604a62a98@google.com Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-09-05 12:57:53 +08:00
f2fs: fix to avoid broken of dnode block list f2fs recovery flow is relying on dnode block link list, it means fsynced file recovery depends on previous dnode's persistence in the list, so during fsync() we should wait on all regular inode's dnode writebacked before issuing flush. By this way, we can avoid dnode block list being broken by out-of-order IO submission due to IO scheduler or driver. Sheng Yong helps to do the test with this patch: Target:/data (f2fs, -) 64MB / 32768KB / 4KB / 8 1 / PERSIST / Index Base: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08 2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7 3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48 Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333 After: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 798.81 202.5 41143 40613.87 602.71 838.08 913.83 2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27 3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91 Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333 Patched/Original: 0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189 It looks like atomic write will suffer performance regression. I suspect that the criminal is that we forcing to wait all dnode being in storage cache before we issue PREFLUSH+FUA. BTW, will commit ("f2fs: don't need to wait for node writes for atomic write") cause the problem: we will lose data of last transaction after SPO, even if atomic write return no error: - atomic_open(); - write() P1, P2, P3; - atomic_commit(); - writeback data: P1, P2, P3; - writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing last transaction. - preflush + fua; - power-cut If we don't wait dnode writeback for atomic_write: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85 2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77 3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92 Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18 Patched/Original: 0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294 SQLite's performance recovers. Jaegeuk: "Practically, I don't see db corruption becase of this. We can excuse to lose the last transaction." Finally, we decide to keep original implementation of atomic write interface sematics that we don't wait all dnode writeback before preflush+fua submission. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 23:03:19 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
fscrypt: handle test_dummy_encryption in more logical way The behavior of the test_dummy_encryption mount option is that when a new file (or directory or symlink) is created in an unencrypted directory, it's automatically encrypted using a dummy encryption policy. That's it; in particular, the encryption (or lack thereof) of existing files (or directories or symlinks) doesn't change. Unfortunately the implementation of test_dummy_encryption is a bit weird and confusing. When test_dummy_encryption is enabled and a file is being created in an unencrypted directory, we set up an encryption key (->i_crypt_info) for the directory. This isn't actually used to do any encryption, however, since the directory is still unencrypted! Instead, ->i_crypt_info is only used for inheriting the encryption policy. One consequence of this is that the filesystem ends up providing a "dummy context" (policy + nonce) instead of a "dummy policy". In commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I mistakenly thought this was required. However, actually the nonce only ends up being used to derive a key that is never used. Another consequence of this implementation is that it allows for 'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge case that can be forgotten about. For example, currently FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the dummy encryption policy when the filesystem is mounted with test_dummy_encryption. That seems like the wrong thing to do, since again, the directory itself is not actually encrypted. Therefore, switch to a more logical and maintainable implementation where the dummy encryption policy inheritance is done without setting up keys for unencrypted directories. This involves: - Adding a function fscrypt_policy_to_inherit() which returns the encryption policy to inherit from a directory. This can be a real policy, a dummy policy, or no policy. - Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc. with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc. - Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead of an inode. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-16 21:11:35 -07:00
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 09:00:42 +09:00
f2fs: remove checkpoint in f2fs_freeze The generic freeze_super() calls sync_filesystems() before f2fs_freeze(). So, basically we don't need to do checkpoint in f2fs_freeze(). But, in xfs/068, it triggers circular locking problem below due to gc_mutex for checkpoint. ====================================================== [ INFO: possible circular locking dependency detected ] 4.9.0-rc1+ #132 Tainted: G OE ------------------------------------------------------- 1. wait for __sb_start_write() by [<ffffffff9845f353>] dump_stack+0x85/0xc2 [<ffffffff980e80bf>] print_circular_bug+0x1cf/0x230 [<ffffffff980eb4d0>] __lock_acquire+0x19e0/0x1bc0 [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff9826bdd0>] __sb_start_write+0x130/0x200 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffffc08c7c3b>] f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff98289991>] iput+0x171/0x2c0 [<ffffffffc08cfccf>] f2fs_sync_inode_meta+0x3f/0xf0 [f2fs] [<ffffffffc08cfe04>] block_operations+0x84/0x110 [f2fs] [<ffffffffc08cff78>] write_checkpoint+0xe8/0xf20 [f2fs] [<ffffffff980e979d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffff9803e9d9>] ? sched_clock+0x9/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c6df5>] f2fs_sync_fs+0x85/0x190 [f2fs] [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4fb0>] sync_fs_one_sb+0x20/0x30 [<ffffffff9826ca3e>] iterate_supers+0xae/0x100 [<ffffffff982a50b5>] sys_sync+0x55/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 2. wait for sbi->gc_mutex by [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffff989063d6>] mutex_lock_nested+0x76/0x3f0 [<ffffffffc08c6de9>] f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c7a6c>] f2fs_freeze+0x1c/0x20 [f2fs] [<ffffffff9826b6ef>] freeze_super+0xcf/0x190 [<ffffffff9827eebc>] do_vfs_ioctl+0x53c/0x6a0 [<ffffffff9827f099>] SyS_ioctl+0x79/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-04 14:59:15 -07:00
f2fs: remove checkpoint in f2fs_freeze The generic freeze_super() calls sync_filesystems() before f2fs_freeze(). So, basically we don't need to do checkpoint in f2fs_freeze(). But, in xfs/068, it triggers circular locking problem below due to gc_mutex for checkpoint. ====================================================== [ INFO: possible circular locking dependency detected ] 4.9.0-rc1+ #132 Tainted: G OE ------------------------------------------------------- 1. wait for __sb_start_write() by [<ffffffff9845f353>] dump_stack+0x85/0xc2 [<ffffffff980e80bf>] print_circular_bug+0x1cf/0x230 [<ffffffff980eb4d0>] __lock_acquire+0x19e0/0x1bc0 [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff9826bdd0>] __sb_start_write+0x130/0x200 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffffc08c7c3b>] f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff98289991>] iput+0x171/0x2c0 [<ffffffffc08cfccf>] f2fs_sync_inode_meta+0x3f/0xf0 [f2fs] [<ffffffffc08cfe04>] block_operations+0x84/0x110 [f2fs] [<ffffffffc08cff78>] write_checkpoint+0xe8/0xf20 [f2fs] [<ffffffff980e979d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffff9803e9d9>] ? sched_clock+0x9/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c6df5>] f2fs_sync_fs+0x85/0x190 [f2fs] [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4fb0>] sync_fs_one_sb+0x20/0x30 [<ffffffff9826ca3e>] iterate_supers+0xae/0x100 [<ffffffff982a50b5>] sys_sync+0x55/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 2. wait for sbi->gc_mutex by [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffff989063d6>] mutex_lock_nested+0x76/0x3f0 [<ffffffffc08c6de9>] f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c7a6c>] f2fs_freeze+0x1c/0x20 [f2fs] [<ffffffff9826b6ef>] freeze_super+0xcf/0x190 [<ffffffff9827eebc>] do_vfs_ioctl+0x53c/0x6a0 [<ffffffff9827f099>] SyS_ioctl+0x79/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-04 14:59:15 -07:00
f2fs: fix miscounted block limit in f2fs_statfs_project() statfs calculates Total/Used/Avail disk space in block unit, so we should translate soft/hard prjquota limit to block unit as well. Below testing result shows the block/inode numbers of Total/Used/Avail from df command are all correct afer applying this patch. [root@localhost quota-tools]\# ./repquota -P /dev/sdb1 *** Report for project quotas on device /dev/sdb1 Block grace time: 7days; Inode grace time: 7days Block limits File limits Project used soft hard grace used soft hard grace ----------------------------------------------------------- \#0 -- 4 0 0 1 0 0 \#101 -- 0 0 0 2 0 0 \#102 -- 0 10240 0 2 10 0 \#103 -- 0 0 20480 2 0 20 \#104 -- 0 10240 20480 2 10 20 \#105 -- 0 20480 10240 2 20 10 [root@localhost sdb1]\# lsattr -p t{1,2,3,4,5} 101 ----------------N-- t1/a1 102 ----------------N-- t2/a2 103 ----------------N-- t3/a3 104 ----------------N-- t4/a4 105 ----------------N-- t5/a5 [root@localhost sdb1]\# df -hi t{1,2,3,4,5} Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sdb1 2.4M 21 2.4M 1% /mnt/sdb1 /dev/sdb1 10 2 8 20% /mnt/sdb1 /dev/sdb1 20 2 18 10% /mnt/sdb1 /dev/sdb1 10 2 8 20% /mnt/sdb1 /dev/sdb1 10 2 8 20% /mnt/sdb1 [root@localhost sdb1]\# df -h t{1,2,3,4,5} Filesystem Size Used Avail Use% Mounted on /dev/sdb1 10G 489M 9.6G 5% /mnt/sdb1 /dev/sdb1 10M 0 10M 0% /mnt/sdb1 /dev/sdb1 20M 0 20M 0% /mnt/sdb1 /dev/sdb1 10M 0 10M 0% /mnt/sdb1 /dev/sdb1 10M 0 10M 0% /mnt/sdb1 Fixes: 909110c060f2 ("f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()") Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-01-04 22:20:03 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
f2fs: add block_age-based extent cache This patch introduces a runtime hot/cold data separation method for f2fs, in order to improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates. Enhanced hot/cold data separation can record data block update frequency as "age" of the extent per inode, and take use of the age info to indicate better temperature type for data block allocation: - It records total data blocks allocated since mount; - When file extent has been updated, it calculate the count of data blocks allocated since last update as the age of the extent; - Before the data block allocated, it searches for the age info and chooses the suitable segment for allocation. Test and result: - Prepare: create about 30000 files * 3% for cold files (with cold file extension like .apk, from 3M to 10M) * 50% for warm files (with random file extension like .FcDxq, from 1K to 4M) * 47% for hot files (with hot file extension like .db, from 1K to 256K) - create(5%)/random update(90%)/delete(5%) the files * total write amount is about 70G * fsync will be called for .db files, and buffered write will be used for other files The storage of test device is large enough(128G) so that it will not switch to SSR mode during the test. Benefit: dirty segment count increment reduce about 14% - before: Dirty +21110 - after: Dirty +18286 Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com> Signed-off-by: xiongping1 <xiongping1@xiaomi.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-01 17:37:15 -08:00
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 16:32:50 -07:00
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 09:00:42 +09:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 21:14:49 +08:00
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 08:15:43 +08:00
f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) Cc: <stable@vger.kernel.org> Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-23 11:58:22 +08:00
f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) Cc: <stable@vger.kernel.org> Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-23 11:58:22 +08:00
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) Cc: <stable@vger.kernel.org> Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-23 11:58:22 +08:00
f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) Cc: <stable@vger.kernel.org> Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-23 11:58:22 +08:00
f2fs: add block_age-based extent cache This patch introduces a runtime hot/cold data separation method for f2fs, in order to improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates. Enhanced hot/cold data separation can record data block update frequency as "age" of the extent per inode, and take use of the age info to indicate better temperature type for data block allocation: - It records total data blocks allocated since mount; - When file extent has been updated, it calculate the count of data blocks allocated since last update as the age of the extent; - Before the data block allocated, it searches for the age info and chooses the suitable segment for allocation. Test and result: - Prepare: create about 30000 files * 3% for cold files (with cold file extension like .apk, from 3M to 10M) * 50% for warm files (with random file extension like .FcDxq, from 1K to 4M) * 47% for hot files (with hot file extension like .db, from 1K to 256K) - create(5%)/random update(90%)/delete(5%) the files * total write amount is about 70G * fsync will be called for .db files, and buffered write will be used for other files The storage of test device is large enough(128G) so that it will not switch to SSR mode during the test. Benefit: dirty segment count increment reduce about 14% - before: Dirty +21110 - after: Dirty +18286 Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com> Signed-off-by: xiongping1 <xiongping1@xiaomi.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-01 17:37:15 -08:00
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 21:14:49 +08:00
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 08:15:43 +08:00
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) Cc: <stable@vger.kernel.org> Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-23 11:58:22 +08:00
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 16:32:50 -07:00
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 21:14:49 +08:00
f2fs: add block_age-based extent cache This patch introduces a runtime hot/cold data separation method for f2fs, in order to improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates. Enhanced hot/cold data separation can record data block update frequency as "age" of the extent per inode, and take use of the age info to indicate better temperature type for data block allocation: - It records total data blocks allocated since mount; - When file extent has been updated, it calculate the count of data blocks allocated since last update as the age of the extent; - Before the data block allocated, it searches for the age info and chooses the suitable segment for allocation. Test and result: - Prepare: create about 30000 files * 3% for cold files (with cold file extension like .apk, from 3M to 10M) * 50% for warm files (with random file extension like .FcDxq, from 1K to 4M) * 47% for hot files (with hot file extension like .db, from 1K to 256K) - create(5%)/random update(90%)/delete(5%) the files * total write amount is about 70G * fsync will be called for .db files, and buffered write will be used for other files The storage of test device is large enough(128G) so that it will not switch to SSR mode during the test. Benefit: dirty segment count increment reduce about 14% - before: Dirty +21110 - after: Dirty +18286 Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com> Signed-off-by: xiongping1 <xiongping1@xiaomi.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-01 17:37:15 -08:00
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 08:15:43 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
mm: introduce memalloc_retry_wait() Various places in the kernel - largely in filesystems - respond to a memory allocation failure by looping around and re-trying. Some of these cannot conveniently use __GFP_NOFAIL, for reasons such as: - a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on - a need to check for the process being signalled between failures - the possibility that other recovery actions could be performed - the allocation is quite deep in support code, and passing down an extra flag to say if __GFP_NOFAIL is wanted would be clumsy. Many of these currently use congestion_wait() which (in almost all cases) simply waits the given timeout - congestion isn't tracked for most devices. It isn't clear what the best delay is for loops, but it is clear that the various filesystems shouldn't be responsible for choosing a timeout. This patch introduces memalloc_retry_wait() with takes on that responsibility. Code that wants to retry a memory allocation can call this function passing the GFP flags that were used. It will wait however is appropriate. For now, it only considers __GFP_NORETRY and whatever gfpflags_allow_blocking() tests. If blocking is allowed without __GFP_NORETRY, then alloc_page either made some reclaim progress, or waited for a while, before failing. So there is no need for much further waiting. memalloc_retry_wait() will wait until the current jiffie ends. If this condition is not met, then alloc_page() won't have waited much if at all. In that case memalloc_retry_wait() waits about 200ms. This is the delay that most current loops uses. linux/sched/mm.h needs to be included in some files now, but linux/backing-dev.h does not. Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <chao@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 14:07:14 -08:00
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 16:46:47 +08:00
f2fs: quota: fix loop condition at f2fs_quota_sync() cnt should be passed to sb_has_quota_active() instead of type to check active quota properly. Moreover, when the type is -1, the compiler with enough inline knowledge can discard sb_has_quota_active() check altogether, causing a NULL pointer dereference at the following inode_lock(dqopt->files[cnt]): [ 2.796010] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 2.796024] Mem abort info: [ 2.796025] ESR = 0x96000005 [ 2.796028] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.796029] SET = 0, FnV = 0 [ 2.796031] EA = 0, S1PTW = 0 [ 2.796032] Data abort info: [ 2.796034] ISV = 0, ISS = 0x00000005 [ 2.796035] CM = 0, WnR = 0 [ 2.796046] user pgtable: 4k pages, 39-bit VAs, pgdp=00000003370d1000 [ 2.796048] [00000000000000a0] pgd=0000000000000000, pud=0000000000000000 [ 2.796051] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 2.796056] CPU: 7 PID: 640 Comm: f2fs_ckpt-259:7 Tainted: G S 5.4.179-arter97-r8-64666-g2f16e087f9d8 #1 [ 2.796057] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP lemonadep (DT) [ 2.796059] pstate: 80c00005 (Nzcv daif +PAN +UAO) [ 2.796065] pc : down_write+0x28/0x70 [ 2.796070] lr : f2fs_quota_sync+0x100/0x294 [ 2.796071] sp : ffffffa3f48ffc30 [ 2.796073] x29: ffffffa3f48ffc30 x28: 0000000000000000 [ 2.796075] x27: ffffffa3f6d718b8 x26: ffffffa415fe9d80 [ 2.796077] x25: ffffffa3f7290048 x24: 0000000000000001 [ 2.796078] x23: 0000000000000000 x22: ffffffa3f7290000 [ 2.796080] x21: ffffffa3f72904a0 x20: ffffffa3f7290110 [ 2.796081] x19: ffffffa3f77a9800 x18: ffffffc020aae038 [ 2.796083] x17: ffffffa40e38e040 x16: ffffffa40e38e6d0 [ 2.796085] x15: ffffffa40e38e6cc x14: ffffffa40e38e6d0 [ 2.796086] x13: 00000000000004f6 x12: 00162c44ff493000 [ 2.796088] x11: 0000000000000400 x10: ffffffa40e38c948 [ 2.796090] x9 : 0000000000000000 x8 : 00000000000000a0 [ 2.796091] x7 : 0000000000000000 x6 : 0000d1060f00002a [ 2.796093] x5 : ffffffa3f48ff718 x4 : 000000000000000d [ 2.796094] x3 : 00000000060c0000 x2 : 0000000000000001 [ 2.796096] x1 : 0000000000000000 x0 : 00000000000000a0 [ 2.796098] Call trace: [ 2.796100] down_write+0x28/0x70 [ 2.796102] f2fs_quota_sync+0x100/0x294 [ 2.796104] block_operations+0x120/0x204 [ 2.796106] f2fs_write_checkpoint+0x11c/0x520 [ 2.796107] __checkpoint_and_complete_reqs+0x7c/0xd34 [ 2.796109] issue_checkpoint_thread+0x6c/0xb8 [ 2.796112] kthread+0x138/0x414 [ 2.796114] ret_from_fork+0x10/0x18 [ 2.796117] Code: aa0803e0 aa1f03e1 52800022 aa0103e9 (c8e97d02) [ 2.796120] ---[ end trace 96e942e8eb6a0b53 ]--- [ 2.800116] Kernel panic - not syncing: Fatal exception [ 2.800120] SMP: stopping secondary CPUs Fixes: 9de71ede81e6 ("f2fs: quota: fix potential deadlock") Cc: <stable@vger.kernel.org> # v5.15+ Signed-off-by: Juhyung Park <qkrwngud825@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-02-15 17:27:21 +09:00
f2fs: quota: fix loop condition at f2fs_quota_sync() cnt should be passed to sb_has_quota_active() instead of type to check active quota properly. Moreover, when the type is -1, the compiler with enough inline knowledge can discard sb_has_quota_active() check altogether, causing a NULL pointer dereference at the following inode_lock(dqopt->files[cnt]): [ 2.796010] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 2.796024] Mem abort info: [ 2.796025] ESR = 0x96000005 [ 2.796028] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.796029] SET = 0, FnV = 0 [ 2.796031] EA = 0, S1PTW = 0 [ 2.796032] Data abort info: [ 2.796034] ISV = 0, ISS = 0x00000005 [ 2.796035] CM = 0, WnR = 0 [ 2.796046] user pgtable: 4k pages, 39-bit VAs, pgdp=00000003370d1000 [ 2.796048] [00000000000000a0] pgd=0000000000000000, pud=0000000000000000 [ 2.796051] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 2.796056] CPU: 7 PID: 640 Comm: f2fs_ckpt-259:7 Tainted: G S 5.4.179-arter97-r8-64666-g2f16e087f9d8 #1 [ 2.796057] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP lemonadep (DT) [ 2.796059] pstate: 80c00005 (Nzcv daif +PAN +UAO) [ 2.796065] pc : down_write+0x28/0x70 [ 2.796070] lr : f2fs_quota_sync+0x100/0x294 [ 2.796071] sp : ffffffa3f48ffc30 [ 2.796073] x29: ffffffa3f48ffc30 x28: 0000000000000000 [ 2.796075] x27: ffffffa3f6d718b8 x26: ffffffa415fe9d80 [ 2.796077] x25: ffffffa3f7290048 x24: 0000000000000001 [ 2.796078] x23: 0000000000000000 x22: ffffffa3f7290000 [ 2.796080] x21: ffffffa3f72904a0 x20: ffffffa3f7290110 [ 2.796081] x19: ffffffa3f77a9800 x18: ffffffc020aae038 [ 2.796083] x17: ffffffa40e38e040 x16: ffffffa40e38e6d0 [ 2.796085] x15: ffffffa40e38e6cc x14: ffffffa40e38e6d0 [ 2.796086] x13: 00000000000004f6 x12: 00162c44ff493000 [ 2.796088] x11: 0000000000000400 x10: ffffffa40e38c948 [ 2.796090] x9 : 0000000000000000 x8 : 00000000000000a0 [ 2.796091] x7 : 0000000000000000 x6 : 0000d1060f00002a [ 2.796093] x5 : ffffffa3f48ff718 x4 : 000000000000000d [ 2.796094] x3 : 00000000060c0000 x2 : 0000000000000001 [ 2.796096] x1 : 0000000000000000 x0 : 00000000000000a0 [ 2.796098] Call trace: [ 2.796100] down_write+0x28/0x70 [ 2.796102] f2fs_quota_sync+0x100/0x294 [ 2.796104] block_operations+0x120/0x204 [ 2.796106] f2fs_write_checkpoint+0x11c/0x520 [ 2.796107] __checkpoint_and_complete_reqs+0x7c/0xd34 [ 2.796109] issue_checkpoint_thread+0x6c/0xb8 [ 2.796112] kthread+0x138/0x414 [ 2.796114] ret_from_fork+0x10/0x18 [ 2.796117] Code: aa0803e0 aa1f03e1 52800022 aa0103e9 (c8e97d02) [ 2.796120] ---[ end trace 96e942e8eb6a0b53 ]--- [ 2.800116] Kernel panic - not syncing: Fatal exception [ 2.800120] SMP: stopping secondary CPUs Fixes: 9de71ede81e6 ("f2fs: quota: fix potential deadlock") Cc: <stable@vger.kernel.org> # v5.15+ Signed-off-by: Juhyung Park <qkrwngud825@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-02-15 17:27:21 +09:00
f2fs: don't need inode lock for system hidden quota Let's avoid false-alarmed lockdep warning. [ 58.914674] [T1501146] -> #2 (&sb->s_type->i_mutex_key#20){+.+.}-{3:3}: [ 58.915975] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.916738] [T1501146] system_server: f2fs_quota_sync+0x60/0x1a8 [ 58.917563] [T1501146] system_server: block_operations+0x16c/0x43c [ 58.918410] [T1501146] system_server: f2fs_write_checkpoint+0x114/0x318 [ 58.919312] [T1501146] system_server: f2fs_issue_checkpoint+0x178/0x21c [ 58.920214] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.920999] [T1501146] system_server: f2fs_do_sync_file+0x334/0x738 [ 58.921862] [T1501146] system_server: f2fs_sync_file+0x30/0x48 [ 58.922667] [T1501146] system_server: __arm64_sys_fsync+0x84/0xf8 [ 58.923506] [T1501146] system_server: el0_svc_common.llvm.12821150825140585682+0xd8/0x20c [ 58.924604] [T1501146] system_server: do_el0_svc+0x28/0xa0 [ 58.925366] [T1501146] system_server: el0_svc+0x24/0x38 [ 58.926094] [T1501146] system_server: el0_sync_handler+0x88/0xec [ 58.926920] [T1501146] system_server: el0_sync+0x1b4/0x1c0 [ 58.927681] [T1501146] -> #1 (&sbi->cp_global_sem){+.+.}-{3:3}: [ 58.928889] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.929650] [T1501146] system_server: f2fs_write_checkpoint+0xbc/0x318 [ 58.930541] [T1501146] system_server: f2fs_issue_checkpoint+0x178/0x21c [ 58.931443] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.932226] [T1501146] system_server: sync_filesystem+0xac/0x130 [ 58.933053] [T1501146] system_server: generic_shutdown_super+0x38/0x150 [ 58.933958] [T1501146] system_server: kill_block_super+0x24/0x58 [ 58.934791] [T1501146] system_server: kill_f2fs_super+0xcc/0x124 [ 58.935618] [T1501146] system_server: deactivate_locked_super+0x90/0x120 [ 58.936529] [T1501146] system_server: deactivate_super+0x74/0xac [ 58.937356] [T1501146] system_server: cleanup_mnt+0x128/0x168 [ 58.938150] [T1501146] system_server: __cleanup_mnt+0x18/0x28 [ 58.938944] [T1501146] system_server: task_work_run+0xb8/0x14c [ 58.939749] [T1501146] system_server: do_notify_resume+0x114/0x1e8 [ 58.940595] [T1501146] system_server: work_pending+0xc/0x5f0 [ 58.941375] [T1501146] -> #0 (&sbi->gc_lock){+.+.}-{3:3}: [ 58.942519] [T1501146] system_server: __lock_acquire+0x1270/0x2868 [ 58.943366] [T1501146] system_server: lock_acquire+0x114/0x294 [ 58.944169] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.944930] [T1501146] system_server: f2fs_issue_checkpoint+0x13c/0x21c [ 58.945831] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.946614] [T1501146] system_server: f2fs_do_sync_file+0x334/0x738 [ 58.947472] [T1501146] system_server: f2fs_ioc_commit_atomic_write+0xc8/0x14c [ 58.948439] [T1501146] system_server: __f2fs_ioctl+0x674/0x154c [ 58.949253] [T1501146] system_server: f2fs_ioctl+0x54/0x88 [ 58.950018] [T1501146] system_server: __arm64_sys_ioctl+0xa8/0x110 [ 58.950865] [T1501146] system_server: el0_svc_common.llvm.12821150825140585682+0xd8/0x20c [ 58.951965] [T1501146] system_server: do_el0_svc+0x28/0xa0 [ 58.952727] [T1501146] system_server: el0_svc+0x24/0x38 [ 58.953454] [T1501146] system_server: el0_sync_handler+0x88/0xec [ 58.954279] [T1501146] system_server: el0_sync+0x1b4/0x1c0 Cc: stable@vger.kernel.org Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-05-05 17:40:25 -07:00
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 16:46:47 +08:00
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 16:46:47 +08:00
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 16:46:47 +08:00
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 16:46:47 +08:00
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 16:46:47 +08:00
f2fs: don't need inode lock for system hidden quota Let's avoid false-alarmed lockdep warning. [ 58.914674] [T1501146] -> #2 (&sb->s_type->i_mutex_key#20){+.+.}-{3:3}: [ 58.915975] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.916738] [T1501146] system_server: f2fs_quota_sync+0x60/0x1a8 [ 58.917563] [T1501146] system_server: block_operations+0x16c/0x43c [ 58.918410] [T1501146] system_server: f2fs_write_checkpoint+0x114/0x318 [ 58.919312] [T1501146] system_server: f2fs_issue_checkpoint+0x178/0x21c [ 58.920214] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.920999] [T1501146] system_server: f2fs_do_sync_file+0x334/0x738 [ 58.921862] [T1501146] system_server: f2fs_sync_file+0x30/0x48 [ 58.922667] [T1501146] system_server: __arm64_sys_fsync+0x84/0xf8 [ 58.923506] [T1501146] system_server: el0_svc_common.llvm.12821150825140585682+0xd8/0x20c [ 58.924604] [T1501146] system_server: do_el0_svc+0x28/0xa0 [ 58.925366] [T1501146] system_server: el0_svc+0x24/0x38 [ 58.926094] [T1501146] system_server: el0_sync_handler+0x88/0xec [ 58.926920] [T1501146] system_server: el0_sync+0x1b4/0x1c0 [ 58.927681] [T1501146] -> #1 (&sbi->cp_global_sem){+.+.}-{3:3}: [ 58.928889] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.929650] [T1501146] system_server: f2fs_write_checkpoint+0xbc/0x318 [ 58.930541] [T1501146] system_server: f2fs_issue_checkpoint+0x178/0x21c [ 58.931443] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.932226] [T1501146] system_server: sync_filesystem+0xac/0x130 [ 58.933053] [T1501146] system_server: generic_shutdown_super+0x38/0x150 [ 58.933958] [T1501146] system_server: kill_block_super+0x24/0x58 [ 58.934791] [T1501146] system_server: kill_f2fs_super+0xcc/0x124 [ 58.935618] [T1501146] system_server: deactivate_locked_super+0x90/0x120 [ 58.936529] [T1501146] system_server: deactivate_super+0x74/0xac [ 58.937356] [T1501146] system_server: cleanup_mnt+0x128/0x168 [ 58.938150] [T1501146] system_server: __cleanup_mnt+0x18/0x28 [ 58.938944] [T1501146] system_server: task_work_run+0xb8/0x14c [ 58.939749] [T1501146] system_server: do_notify_resume+0x114/0x1e8 [ 58.940595] [T1501146] system_server: work_pending+0xc/0x5f0 [ 58.941375] [T1501146] -> #0 (&sbi->gc_lock){+.+.}-{3:3}: [ 58.942519] [T1501146] system_server: __lock_acquire+0x1270/0x2868 [ 58.943366] [T1501146] system_server: lock_acquire+0x114/0x294 [ 58.944169] [T1501146] system_server: down_write+0x7c/0xe0 [ 58.944930] [T1501146] system_server: f2fs_issue_checkpoint+0x13c/0x21c [ 58.945831] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c [ 58.946614] [T1501146] system_server: f2fs_do_sync_file+0x334/0x738 [ 58.947472] [T1501146] system_server: f2fs_ioc_commit_atomic_write+0xc8/0x14c [ 58.948439] [T1501146] system_server: __f2fs_ioctl+0x674/0x154c [ 58.949253] [T1501146] system_server: f2fs_ioctl+0x54/0x88 [ 58.950018] [T1501146] system_server: __arm64_sys_ioctl+0xa8/0x110 [ 58.950865] [T1501146] system_server: el0_svc_common.llvm.12821150825140585682+0xd8/0x20c [ 58.951965] [T1501146] system_server: do_el0_svc+0x28/0xa0 [ 58.952727] [T1501146] system_server: el0_svc+0x24/0x38 [ 58.953454] [T1501146] system_server: el0_sync_handler+0x88/0xec [ 58.954279] [T1501146] system_server: el0_sync+0x1b4/0x1c0 Cc: stable@vger.kernel.org Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-05-05 17:40:25 -07:00
f2fs: quota: fix potential deadlock xfstest generic/587 reports a deadlock issue as below: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc1 #69 Not tainted ------------------------------------------------------ repquota/8606 is trying to acquire lock: ffff888022ac9320 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}, at: f2fs_quota_sync+0x207/0x300 [f2fs] but task is already holding lock: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&sbi->quota_sem){.+.+}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_quota_sync+0x59/0x300 [f2fs] f2fs_quota_on+0x48/0x100 [f2fs] do_quotactl+0x5e3/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&sbi->cp_rwsem){++++}-{3:3}: __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_read+0x3b/0x2a0 f2fs_unlink+0x353/0x670 [f2fs] vfs_unlink+0x1c7/0x380 do_unlinkat+0x413/0x4b0 __x64_sys_unlinkat+0x50/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&sb->s_type->i_mutex_key#18){+.+.}-{3:3}: check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &sb->s_type->i_mutex_key#18 --> &sbi->cp_rwsem --> &sbi->quota_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sbi->quota_sem); lock(&sbi->cp_rwsem); lock(&sbi->quota_sem); lock(&sb->s_type->i_mutex_key#18); *** DEADLOCK *** 3 locks held by repquota/8606: #0: ffff88801efac0e0 (&type->s_umount_key#53){++++}-{3:3}, at: user_get_super+0xd9/0x190 #1: ffff8880084bc380 (&sbi->cp_rwsem){++++}-{3:3}, at: f2fs_quota_sync+0x3e/0x300 [f2fs] #2: ffff8880084bcde8 (&sbi->quota_sem){.+.+}-{3:3}, at: f2fs_quota_sync+0x59/0x300 [f2fs] stack backtrace: CPU: 6 PID: 8606 Comm: repquota Not tainted 5.14.0-rc1 #69 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack_lvl+0xce/0x134 dump_stack+0x17/0x20 print_circular_bug.isra.0.cold+0x239/0x253 check_noncircular+0x1be/0x1f0 check_prev_add+0xdc/0xb30 validate_chain+0xa67/0xb20 __lock_acquire+0x648/0x10b0 lock_acquire+0x128/0x470 down_write+0x39/0xc0 f2fs_quota_sync+0x207/0x300 [f2fs] do_quotactl+0xaff/0xb30 __x64_sys_quotactl+0x23a/0x4e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f883b0b4efe The root cause is ABBA deadlock of inode lock and cp_rwsem, reorder locks in f2fs_quota_sync() as below to fix this issue: - lock inode - lock cp_rwsem - lock quota_sem Fixes: db6ec53b7e03 ("f2fs: add a rw_sem to cover quota flag changes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-19 16:46:47 +08:00
f2fs: report error if quota off error during umount Now, we depend on fsck to ensure quota file data is ok, so we scan whole partition if checkpoint without umount flag. It's same for quota off error case, which may make quota file data inconsistent. generic/019 reports below error: __quota_error: 1160 callbacks suppressed Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds. Have a nice day... If we failed in below path due to fail to write dquot block, we will miss to release quota inode, fix it. - f2fs_put_super - f2fs_quota_off_umount - f2fs_quota_off - f2fs_quota_sync <-- failed - dquot_quota_off <-- missed to call Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-26 13:12:43 +08:00
f2fs: report error if quota off error during umount Now, we depend on fsck to ensure quota file data is ok, so we scan whole partition if checkpoint without umount flag. It's same for quota off error case, which may make quota file data inconsistent. generic/019 reports below error: __quota_error: 1160 callbacks suppressed Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds. Have a nice day... If we failed in below path due to fail to write dquot block, we will miss to release quota inode, fix it. - f2fs_put_super - f2fs_quota_off_umount - f2fs_quota_off - f2fs_quota_sync <-- failed - dquot_quota_off <-- missed to call Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-26 13:12:43 +08:00
f2fs: report error if quota off error during umount Now, we depend on fsck to ensure quota file data is ok, so we scan whole partition if checkpoint without umount flag. It's same for quota off error case, which may make quota file data inconsistent. generic/019 reports below error: __quota_error: 1160 callbacks suppressed Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds. Have a nice day... If we failed in below path due to fail to write dquot block, we will miss to release quota inode, fix it. - f2fs_put_super - f2fs_quota_off_umount - f2fs_quota_off - f2fs_quota_sync <-- failed - dquot_quota_off <-- missed to call Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-26 13:12:43 +08:00
f2fs: report error if quota off error during umount Now, we depend on fsck to ensure quota file data is ok, so we scan whole partition if checkpoint without umount flag. It's same for quota off error case, which may make quota file data inconsistent. generic/019 reports below error: __quota_error: 1160 callbacks suppressed Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds. Have a nice day... If we failed in below path due to fail to write dquot block, we will miss to release quota inode, fix it. - f2fs_put_super - f2fs_quota_off_umount - f2fs_quota_off - f2fs_quota_sync <-- failed - dquot_quota_off <-- missed to call Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-26 13:12:43 +08:00
f2fs: report error if quota off error during umount Now, we depend on fsck to ensure quota file data is ok, so we scan whole partition if checkpoint without umount flag. It's same for quota off error case, which may make quota file data inconsistent. generic/019 reports below error: __quota_error: 1160 callbacks suppressed Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds. Have a nice day... If we failed in below path due to fail to write dquot block, we will miss to release quota inode, fix it. - f2fs_put_super - f2fs_quota_off_umount - f2fs_quota_off - f2fs_quota_sync <-- failed - dquot_quota_off <-- missed to call Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-26 13:12:43 +08:00
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 18:49:26 +08:00
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 18:49:26 +08:00
fscrypt: handle test_dummy_encryption in more logical way The behavior of the test_dummy_encryption mount option is that when a new file (or directory or symlink) is created in an unencrypted directory, it's automatically encrypted using a dummy encryption policy. That's it; in particular, the encryption (or lack thereof) of existing files (or directories or symlinks) doesn't change. Unfortunately the implementation of test_dummy_encryption is a bit weird and confusing. When test_dummy_encryption is enabled and a file is being created in an unencrypted directory, we set up an encryption key (->i_crypt_info) for the directory. This isn't actually used to do any encryption, however, since the directory is still unencrypted! Instead, ->i_crypt_info is only used for inheriting the encryption policy. One consequence of this is that the filesystem ends up providing a "dummy context" (policy + nonce) instead of a "dummy policy". In commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I mistakenly thought this was required. However, actually the nonce only ends up being used to derive a key that is never used. Another consequence of this implementation is that it allows for 'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge case that can be forgotten about. For example, currently FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the dummy encryption policy when the filesystem is mounted with test_dummy_encryption. That seems like the wrong thing to do, since again, the directory itself is not actually encrypted. Therefore, switch to a more logical and maintainable implementation where the dummy encryption policy inheritance is done without setting up keys for unencrypted directories. This involves: - Adding a function fscrypt_policy_to_inherit() which returns the encryption policy to inherit from a directory. This can be a real policy, a dummy policy, or no policy. - Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc. with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc. - Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead of an inode. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-16 21:11:35 -07:00
fscrypt: handle test_dummy_encryption in more logical way The behavior of the test_dummy_encryption mount option is that when a new file (or directory or symlink) is created in an unencrypted directory, it's automatically encrypted using a dummy encryption policy. That's it; in particular, the encryption (or lack thereof) of existing files (or directories or symlinks) doesn't change. Unfortunately the implementation of test_dummy_encryption is a bit weird and confusing. When test_dummy_encryption is enabled and a file is being created in an unencrypted directory, we set up an encryption key (->i_crypt_info) for the directory. This isn't actually used to do any encryption, however, since the directory is still unencrypted! Instead, ->i_crypt_info is only used for inheriting the encryption policy. One consequence of this is that the filesystem ends up providing a "dummy context" (policy + nonce) instead of a "dummy policy". In commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I mistakenly thought this was required. However, actually the nonce only ends up being used to derive a key that is never used. Another consequence of this implementation is that it allows for 'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge case that can be forgotten about. For example, currently FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the dummy encryption policy when the filesystem is mounted with test_dummy_encryption. That seems like the wrong thing to do, since again, the directory itself is not actually encrypted. Therefore, switch to a more logical and maintainable implementation where the dummy encryption policy inheritance is done without setting up keys for unencrypted directories. This involves: - Adding a function fscrypt_policy_to_inherit() which returns the encryption policy to inherit from a directory. This can be a real policy, a dummy policy, or no policy. - Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc. with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc. - Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead of an inode. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-16 21:11:35 -07:00
fscrypt: support crypto data unit size less than filesystem block size Until now, fscrypt has always used the filesystem block size as the granularity of file contents encryption. Two scenarios have come up where a sub-block granularity of contents encryption would be useful: 1. Inline crypto hardware that only supports a crypto data unit size that is less than the filesystem block size. 2. Support for direct I/O at a granularity less than the filesystem block size, for example at the block device's logical block size in order to match the traditional direct I/O alignment requirement. (1) first came up with older eMMC inline crypto hardware that only supports a crypto data unit size of 512 bytes. That specific case ultimately went away because all systems with that hardware continued using out of tree code and never actually upgraded to the upstream inline crypto framework. But, now it's coming back in a new way: some current UFS controllers only support a data unit size of 4096 bytes, and there is a proposal to increase the filesystem block size to 16K. (2) was discussed as a "nice to have" feature, though not essential, when support for direct I/O on encrypted files was being upstreamed. Still, the fact that this feature has come up several times does suggest it would be wise to have available. Therefore, this patch implements it by using one of the reserved bytes in fscrypt_policy_v2 to allow users to select a sub-block data unit size. Supported data unit sizes are powers of 2 between 512 and the filesystem block size, inclusively. Support is implemented for both the FS-layer and inline crypto cases. This patch focuses on the basic support for sub-block data units. Some things are out of scope for this patch but may be addressed later: - Supporting sub-block data units in combination with FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64, in most cases. Unfortunately this combination usually causes data unit indices to exceed 32 bits, and thus fscrypt_supported_policy() correctly disallows it. The users who potentially need this combination are using f2fs. To support it, f2fs would need to provide an option to slightly reduce its max file size. - Supporting sub-block data units in combination with FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32. This has the same problem described above, but also it will need special code to make DUN wraparound still happen on a FS block boundary. - Supporting use case (2) mentioned above. The encrypted direct I/O code will need to stop requiring and assuming FS block alignment. This won't be hard, but it belongs in a separate patch. - Supporting this feature on filesystems other than ext4 and f2fs. (Filesystems declare support for it via their fscrypt_operations.) On UBIFS, sub-block data units don't make sense because UBIFS encrypts variable-length blocks as a result of compression. CephFS could support it, but a bit more work would be needed to make the fscrypt_*_block_inplace functions play nicely with sub-block data units. I don't think there's a use case for this on CephFS anyway. Link: https://lore.kernel.org/r/20230925055451.59499-6-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-09-24 22:54:51 -07:00
fscrypt: handle test_dummy_encryption in more logical way The behavior of the test_dummy_encryption mount option is that when a new file (or directory or symlink) is created in an unencrypted directory, it's automatically encrypted using a dummy encryption policy. That's it; in particular, the encryption (or lack thereof) of existing files (or directories or symlinks) doesn't change. Unfortunately the implementation of test_dummy_encryption is a bit weird and confusing. When test_dummy_encryption is enabled and a file is being created in an unencrypted directory, we set up an encryption key (->i_crypt_info) for the directory. This isn't actually used to do any encryption, however, since the directory is still unencrypted! Instead, ->i_crypt_info is only used for inheriting the encryption policy. One consequence of this is that the filesystem ends up providing a "dummy context" (policy + nonce) instead of a "dummy policy". In commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I mistakenly thought this was required. However, actually the nonce only ends up being used to derive a key that is never used. Another consequence of this implementation is that it allows for 'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge case that can be forgotten about. For example, currently FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the dummy encryption policy when the filesystem is mounted with test_dummy_encryption. That seems like the wrong thing to do, since again, the directory itself is not actually encrypted. Therefore, switch to a more logical and maintainable implementation where the dummy encryption policy inheritance is done without setting up keys for unencrypted directories. This involves: - Adding a function fscrypt_policy_to_inherit() which returns the encryption policy to inherit from a directory. This can be a real policy, a dummy policy, or no policy. - Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc. with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc. - Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead of an inode. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-16 21:11:35 -07:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: enhance on-disk inode structure scalability This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-19 00:19:06 +08:00
f2fs: enhance on-disk inode structure scalability This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-19 00:19:06 +08:00
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 21:59:50 +08:00
f2fs: enhance on-disk inode structure scalability This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-19 00:19:06 +08:00
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-27 19:03:22 -07:00
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-27 19:03:22 -07:00
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-27 19:03:22 -07:00
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-27 19:03:22 -07:00
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-27 19:03:22 -07:00
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-27 19:03:22 -07:00
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-27 19:03:22 -07:00
f2fs: fix to do sanity check on segment/section count As syzbot reported: BUG: KASAN: slab-out-of-bounds in init_min_max_mtime fs/f2fs/segment.c:4710 [inline] BUG: KASAN: slab-out-of-bounds in f2fs_build_segment_manager+0x9302/0xa6d0 fs/f2fs/segment.c:4792 Read of size 8 at addr ffff8880a1b934a8 by task syz-executor682/6878 CPU: 1 PID: 6878 Comm: syz-executor682 Not tainted 5.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 init_min_max_mtime fs/f2fs/segment.c:4710 [inline] f2fs_build_segment_manager+0x9302/0xa6d0 fs/f2fs/segment.c:4792 f2fs_fill_super+0x381a/0x6e80 fs/f2fs/super.c:3633 mount_bdev+0x32e/0x3f0 fs/super.c:1417 legacy_get_tree+0x105/0x220 fs/fs_context.c:592 vfs_get_tree+0x89/0x2f0 fs/super.c:1547 do_new_mount fs/namespace.c:2875 [inline] path_mount+0x1387/0x20a0 fs/namespace.c:3192 do_mount fs/namespace.c:3205 [inline] __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount fs/namespace.c:3390 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The root cause is: if segs_per_sec is larger than one, and segment count in last section is less than segs_per_sec, we will suffer out-of-boundary memory access on sit_i->sentries[] in init_min_max_mtime(). Fix this by adding sanity check among segment count, section count and segs_per_sec value in sanity_check_raw_super(). Reported-by: syzbot+481a3ffab50fed41dcc0@syzkaller.appspotmail.com Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-29 09:23:34 +08:00
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-27 19:03:22 -07:00
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-27 19:03:22 -07:00
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-27 19:03:22 -07:00
f2fs: fix to do sanity check with secs_per_zone As Wen Xu reported in below link: https://bugzilla.kernel.org/show_bug.cgi?id=200183 - Overview Divide zero in reset_curseg() when mounting a crafted f2fs image - Reproduce - Kernel message [ 588.281510] divide error: 0000 [#1] SMP KASAN PTI [ 588.282701] CPU: 0 PID: 1293 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 588.284000] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 588.286178] RIP: 0010:reset_curseg+0x94/0x1a0 [ 588.298166] RSP: 0018:ffff8801e88d7940 EFLAGS: 00010246 [ 588.299360] RAX: 0000000000000014 RBX: ffff8801e1d46d00 RCX: ffffffffb88bf60b [ 588.300809] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e1d46d64 [ 588.305272] R13: 0000000000000000 R14: 0000000000000014 R15: 0000000000000000 [ 588.306822] FS: 00007fad85008840(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 588.308456] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 588.309623] CR2: 0000000001705078 CR3: 00000001f30f8000 CR4: 00000000000006f0 [ 588.311085] Call Trace: [ 588.311637] f2fs_build_segment_manager+0x103f/0x3410 [ 588.316136] ? f2fs_commit_super+0x1b0/0x1b0 [ 588.317031] ? set_blocksize+0x90/0x140 [ 588.319473] f2fs_mount+0x15/0x20 [ 588.320166] mount_fs+0x60/0x1a0 [ 588.320847] ? alloc_vfsmnt+0x309/0x360 [ 588.321647] vfs_kern_mount+0x6b/0x1a0 [ 588.322432] do_mount+0x34a/0x18c0 [ 588.323175] ? strndup_user+0x46/0x70 [ 588.323937] ? copy_mount_string+0x20/0x20 [ 588.324793] ? memcg_kmem_put_cache+0x1b/0xa0 [ 588.325702] ? kasan_check_write+0x14/0x20 [ 588.326562] ? _copy_from_user+0x6a/0x90 [ 588.327375] ? memdup_user+0x42/0x60 [ 588.328118] ksys_mount+0x83/0xd0 [ 588.328808] __x64_sys_mount+0x67/0x80 [ 588.329607] do_syscall_64+0x78/0x170 [ 588.330400] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 588.331461] RIP: 0033:0x7fad848e8b9a [ 588.336022] RSP: 002b:00007ffd7c5b6be8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 588.337547] RAX: ffffffffffffffda RBX: 00000000016f8030 RCX: 00007fad848e8b9a [ 588.338999] RDX: 00000000016f8210 RSI: 00000000016f9f30 RDI: 0000000001700ec0 [ 588.340442] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 588.341887] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001700ec0 [ 588.343341] R13: 00000000016f8210 R14: 0000000000000000 R15: 0000000000000003 [ 588.354891] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 588.355862] RIP: 0010:reset_curseg+0x94/0x1a0 [ 588.360742] RSP: 0018:ffff8801e88d7940 EFLAGS: 00010246 [ 588.361812] RAX: 0000000000000014 RBX: ffff8801e1d46d00 RCX: ffffffffb88bf60b [ 588.363485] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e1d46d64 [ 588.365213] RBP: ffff8801e88d7968 R08: ffffed003c32266f R09: ffffed003c32266f [ 588.366661] R10: 0000000000000001 R11: ffffed003c32266e R12: ffff8801f0337700 [ 588.368110] R13: 0000000000000000 R14: 0000000000000014 R15: 0000000000000000 [ 588.370057] FS: 00007fad85008840(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 588.372099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 588.373291] CR2: 0000000001705078 CR3: 00000001f30f8000 CR4: 00000000000006f0 - Location https://elixir.bootlin.com/linux/latest/source/fs/f2fs/segment.c#L2147 curseg->zone = GET_ZONE_FROM_SEG(sbi, curseg->segno); If secs_per_zone is corrupted due to fuzzing test, it will cause divide zero operation when using GET_ZONE_FROM_SEG macro, so we should do more sanity check with secs_per_zone during mount to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-23 00:12:36 +08:00
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-27 19:03:22 -07:00
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-27 19:03:22 -07:00
f2fs: enhance sanity_check_raw_super() to avoid potential overflows In order to avoid the below overflow issue, we should have checked the boundaries in superblock before reaching out to allocation. As Linus suggested, the right place should be sanity_check_raw_super(). Dr Silvio Cesare of InfoSect reported: There are integer overflows with using the cp_payload superblock field in the f2fs filesystem potentially leading to memory corruption. include/linux/f2fs_fs.h struct f2fs_super_block { ... __le32 cp_payload; fs/f2fs/f2fs.h typedef u32 block_t; /* * should not change u32, since it is the on-disk block * address format, __le32. */ ... static inline block_t __cp_payload(struct f2fs_sb_info *sbi) { return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload); } fs/f2fs/checkpoint.c block_t start_blk, orphan_blocks, i, j; ... start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi); orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi); +++ integer overflows ... unsigned int cp_blks = 1 + __cp_payload(sbi); ... sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL); +++ integer overflow leading to incorrect heap allocation. int cp_payload_blks = __cp_payload(sbi); ... ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks + orphan_blocks); +++ sign bug and integer overflow ... for (i = 1; i < 1 + cp_payload_blks; i++) +++ integer overflow ... sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS - NR_CURSEG_TYPE - __cp_payload(sbi)) * F2FS_ORPHANS_PER_BLOCK; +++ integer overflow Reported-by: Greg KH <greg@kroah.com> Reported-by: Silvio Cesare <silvio.cesare@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-27 19:03:22 -07:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize during mount, in order to avoid accessing across cache boundary with this abnormal bitmap size. - Overview buffer overrun in build_sit_info() when mounting a crafted f2fs image - Reproduce - Kernel message [ 548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.584979] ================================================================== [ 548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50 [ 548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295 [ 548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.589438] Call Trace: [ 548.589474] dump_stack+0x7b/0xb5 [ 548.589487] print_address_description+0x70/0x290 [ 548.589492] kasan_report+0x291/0x390 [ 548.589496] ? kmemdup+0x36/0x50 [ 548.589509] check_memory_region+0x139/0x190 [ 548.589514] memcpy+0x23/0x50 [ 548.589518] kmemdup+0x36/0x50 [ 548.589545] f2fs_build_segment_manager+0x8fa/0x3410 [ 548.589551] ? __asan_loadN+0xf/0x20 [ 548.589560] ? f2fs_sanity_check_ckpt+0x1be/0x240 [ 548.589566] ? f2fs_flush_sit_entries+0x10c0/0x10c0 [ 548.589587] ? __put_user_ns+0x40/0x40 [ 548.589604] ? find_next_bit+0x57/0x90 [ 548.589610] f2fs_fill_super+0x194b/0x2b40 [ 548.589617] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589637] ? set_blocksize+0x90/0x140 [ 548.589651] mount_bdev+0x1c5/0x210 [ 548.589655] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589667] f2fs_mount+0x15/0x20 [ 548.589672] mount_fs+0x60/0x1a0 [ 548.589683] ? alloc_vfsmnt+0x309/0x360 [ 548.589688] vfs_kern_mount+0x6b/0x1a0 [ 548.589699] do_mount+0x34a/0x18c0 [ 548.589710] ? lockref_put_or_lock+0xcf/0x160 [ 548.589716] ? copy_mount_string+0x20/0x20 [ 548.589728] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.589734] ? kasan_check_write+0x14/0x20 [ 548.589740] ? _copy_from_user+0x6a/0x90 [ 548.589744] ? memdup_user+0x42/0x60 [ 548.589750] ksys_mount+0x83/0xd0 [ 548.589755] __x64_sys_mount+0x67/0x80 [ 548.589781] do_syscall_64+0x78/0x170 [ 548.589797] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.589820] RIP: 0033:0x7f76fc331b9a [ 548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.590242] The buggy address belongs to the page: [ 548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 548.592886] flags: 0x2ffff0000000000() [ 548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 548.603713] page dumped because: kasan: bad access detected [ 548.605203] Memory state around the buggy address: [ 548.606198] ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.607676] ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.610629] ^ [ 548.612088] ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.613674] ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.615141] ================================================================== [ 548.616613] Disabling lock debugging due to kernel taint [ 548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420 [ 548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G B 4.18.0-rc1+ #4 [ 548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420 [ 548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b [ 548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246 [ 548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7 [ 548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000 [ 548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5 [ 548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040 [ 548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938 [ 548.623299] FS: 00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 548.623302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0 [ 548.623317] Call Trace: [ 548.623325] ? kasan_check_read+0x11/0x20 [ 548.623330] ? __zone_watermark_ok+0x92/0x240 [ 548.623336] ? get_page_from_freelist+0x1c3/0x1d90 [ 548.623347] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 548.623353] ? warn_alloc+0x250/0x250 [ 548.623358] ? save_stack+0x46/0xd0 [ 548.623361] ? kasan_kmalloc+0xad/0xe0 [ 548.623366] ? __isolate_free_page+0x2a0/0x2a0 [ 548.623370] ? mount_fs+0x60/0x1a0 [ 548.623374] ? vfs_kern_mount+0x6b/0x1a0 [ 548.623378] ? do_mount+0x34a/0x18c0 [ 548.623383] ? ksys_mount+0x83/0xd0 [ 548.623387] ? __x64_sys_mount+0x67/0x80 [ 548.623391] ? do_syscall_64+0x78/0x170 [ 548.623396] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623401] __alloc_pages_nodemask+0x3c5/0x400 [ 548.623407] ? __alloc_pages_slowpath+0x1420/0x1420 [ 548.623412] ? __mutex_lock_slowpath+0x20/0x20 [ 548.623417] ? kvmalloc_node+0x31/0x80 [ 548.623424] alloc_pages_current+0x75/0x110 [ 548.623436] kmalloc_order+0x24/0x60 [ 548.623442] kmalloc_order_trace+0x24/0xb0 [ 548.623448] __kmalloc_track_caller+0x207/0x220 [ 548.623455] ? f2fs_build_node_manager+0x399/0xbb0 [ 548.623460] kmemdup+0x20/0x50 [ 548.623465] f2fs_build_node_manager+0x399/0xbb0 [ 548.623470] f2fs_fill_super+0x195e/0x2b40 [ 548.623477] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623481] ? set_blocksize+0x90/0x140 [ 548.623486] mount_bdev+0x1c5/0x210 [ 548.623489] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623495] f2fs_mount+0x15/0x20 [ 548.623498] mount_fs+0x60/0x1a0 [ 548.623503] ? alloc_vfsmnt+0x309/0x360 [ 548.623508] vfs_kern_mount+0x6b/0x1a0 [ 548.623513] do_mount+0x34a/0x18c0 [ 548.623518] ? lockref_put_or_lock+0xcf/0x160 [ 548.623523] ? copy_mount_string+0x20/0x20 [ 548.623528] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.623533] ? kasan_check_write+0x14/0x20 [ 548.623537] ? _copy_from_user+0x6a/0x90 [ 548.623542] ? memdup_user+0x42/0x60 [ 548.623547] ksys_mount+0x83/0xd0 [ 548.623552] __x64_sys_mount+0x67/0x80 [ 548.623557] do_syscall_64+0x78/0x170 [ 548.623562] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623566] RIP: 0033:0x7f76fc331b9a [ 548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.623650] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager [ 548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578 sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL); Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size. Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-23 11:25:19 +08:00
f2fs: fix to do sanity check with user_block_count This patch fixs to do sanity check with user_block_count. - Overview Divide zero in utilization when mount() a corrupted f2fs image - Reproduce (4.18 upstream kernel) - Kernel message [ 564.099503] F2FS-fs (loop0): invalid crc value [ 564.101991] divide error: 0000 [#1] SMP KASAN PTI [ 564.103103] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Not tainted 4.18.0-rc1+ #4 [ 564.104584] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.106624] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.107692] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.111686] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.112775] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.114250] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.115706] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.117177] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.118634] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.120094] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.121748] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.122923] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.124383] Call Trace: [ 564.124924] ? __issue_discard_cmd+0x480/0x480 [ 564.125882] ? __sched_text_start+0x8/0x8 [ 564.126756] ? __kthread_parkme+0xcb/0x100 [ 564.127620] ? kthread_blkcg+0x70/0x70 [ 564.128412] kthread+0x180/0x1d0 [ 564.129105] ? __issue_discard_cmd+0x480/0x480 [ 564.130029] ? kthread_associate_blkcg+0x150/0x150 [ 564.131033] ret_from_fork+0x35/0x40 [ 564.131794] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 564.141798] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 564.142773] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.143885] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.147776] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.148856] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.150424] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.151906] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.153463] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.154915] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.156405] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.158070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.159279] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.161043] ================================================================== [ 564.162587] BUG: KASAN: stack-out-of-bounds in from_kuid_munged+0x1d/0x50 [ 564.163994] Read of size 4 at addr ffff8801f3117c84 by task f2fs_discard-7:/1298 [ 564.165852] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Tainted: G D 4.18.0-rc1+ #4 [ 564.167593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.169522] Call Trace: [ 564.170057] dump_stack+0x7b/0xb5 [ 564.170778] print_address_description+0x70/0x290 [ 564.171765] kasan_report+0x291/0x390 [ 564.172540] ? from_kuid_munged+0x1d/0x50 [ 564.173408] __asan_load4+0x78/0x80 [ 564.174148] from_kuid_munged+0x1d/0x50 [ 564.174962] do_notify_parent+0x1f5/0x4f0 [ 564.175808] ? send_sigqueue+0x390/0x390 [ 564.176639] ? css_set_move_task+0x152/0x340 [ 564.184197] do_exit+0x1290/0x1390 [ 564.184950] ? __issue_discard_cmd+0x480/0x480 [ 564.185884] ? mm_update_next_owner+0x380/0x380 [ 564.186829] ? __sched_text_start+0x8/0x8 [ 564.187672] ? __kthread_parkme+0xcb/0x100 [ 564.188528] ? kthread_blkcg+0x70/0x70 [ 564.189333] ? kthread+0x180/0x1d0 [ 564.190052] ? __issue_discard_cmd+0x480/0x480 [ 564.190983] rewind_stack_do_exit+0x17/0x20 [ 564.192190] The buggy address belongs to the page: [ 564.193213] page:ffffea0007cc45c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 564.194856] flags: 0x2ffff0000000000() [ 564.195644] raw: 02ffff0000000000 0000000000000000 dead000000000200 0000000000000000 [ 564.197247] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 564.198826] page dumped because: kasan: bad access detected [ 564.200299] Memory state around the buggy address: [ 564.201306] ffff8801f3117b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.202779] ffff8801f3117c00: 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 [ 564.204252] >ffff8801f3117c80: f3 f3 f3 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 564.205742] ^ [ 564.206424] ffff8801f3117d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.207908] ffff8801f3117d80: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 [ 564.209389] ================================================================== [ 564.231795] F2FS-fs (loop0): Mounted with checkpoint version = 2 - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L586 return div_u64((u64)valid_user_blocks(sbi) * 100, sbi->user_block_count); Missing checks on sbi->user_block_count. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-27 18:05:54 +08:00
f2fs: fix to do sanity check with cp_pack_start_sum After fuzzing, cp_pack_start_sum could be corrupted, so current log's summary info should be wrong due to loading incorrect summary block. Then, if segment's type in current log is exceeded NR_CURSEG_TYPE, it can lead accessing invalid dirty_i->dirty_segmap bitmap finally. Add sanity check for cp_pack_start_sum to fix this issue. https://bugzilla.kernel.org/show_bug.cgi?id=200419 - Reproduce - Kernel message (f2fs-dev w/ KASAN) [ 3117.578432] F2FS-fs (loop0): Invalid log blocks per segment (8) [ 3117.578445] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock [ 3117.581364] F2FS-fs (loop0): invalid crc_offset: 30716 [ 3117.583564] WARNING: CPU: 1 PID: 1225 at fs/f2fs/checkpoint.c:90 __get_meta_page+0x448/0x4b0 [ 3117.583570] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.584014] CPU: 1 PID: 1225 Comm: mount Not tainted 4.17.0+ #1 [ 3117.584017] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.584022] RIP: 0010:__get_meta_page+0x448/0x4b0 [ 3117.584023] Code: 00 49 8d bc 24 84 00 00 00 e8 74 54 da ff 41 83 8c 24 84 00 00 00 08 4c 89 f6 4c 89 ef e8 c0 d9 95 00 48 89 ef e8 18 e3 00 00 <0f> 0b f0 80 4d 48 04 e9 0f fe ff ff 0f 0b 48 89 c7 48 89 04 24 e8 [ 3117.584072] RSP: 0018:ffff88018eb678c0 EFLAGS: 00010286 [ 3117.584082] RAX: ffff88018f0a6a78 RBX: ffffea0007a46600 RCX: ffffffff9314d1b2 [ 3117.584085] RDX: ffffffff00000001 RSI: 0000000000000000 RDI: ffff88018f0a6a98 [ 3117.584087] RBP: ffff88018ebe9980 R08: 0000000000000002 R09: 0000000000000001 [ 3117.584090] R10: 0000000000000001 R11: ffffed00326e4450 R12: ffff880193722200 [ 3117.584092] R13: ffff88018ebe9afc R14: 0000000000000206 R15: ffff88018eb67900 [ 3117.584096] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.584098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.584101] CR2: 00000000016f21b8 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.584112] Call Trace: [ 3117.584121] ? f2fs_set_meta_page_dirty+0x150/0x150 [ 3117.584127] ? f2fs_build_segment_manager+0xbf9/0x3190 [ 3117.584133] ? f2fs_npages_for_summary_flush+0x75/0x120 [ 3117.584145] f2fs_build_segment_manager+0xda8/0x3190 [ 3117.584151] ? f2fs_get_valid_checkpoint+0x298/0xa00 [ 3117.584156] ? f2fs_flush_sit_entries+0x10e0/0x10e0 [ 3117.584184] ? map_id_range_down+0x17c/0x1b0 [ 3117.584188] ? __put_user_ns+0x30/0x30 [ 3117.584206] ? find_next_bit+0x53/0x90 [ 3117.584237] ? cpumask_next+0x16/0x20 [ 3117.584249] f2fs_fill_super+0x1948/0x2b40 [ 3117.584258] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584279] ? sget_userns+0x65e/0x690 [ 3117.584296] ? set_blocksize+0x88/0x130 [ 3117.584302] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584305] mount_bdev+0x1c0/0x200 [ 3117.584310] mount_fs+0x5c/0x190 [ 3117.584320] vfs_kern_mount+0x64/0x190 [ 3117.584330] do_mount+0x2e4/0x1450 [ 3117.584343] ? lockref_put_return+0x130/0x130 [ 3117.584347] ? copy_mount_string+0x20/0x20 [ 3117.584357] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.584362] ? kasan_kmalloc+0xa6/0xd0 [ 3117.584373] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.584377] ? __kmalloc_track_caller+0x196/0x210 [ 3117.584383] ? _copy_from_user+0x61/0x90 [ 3117.584396] ? memdup_user+0x3e/0x60 [ 3117.584401] ksys_mount+0x7e/0xd0 [ 3117.584405] __x64_sys_mount+0x62/0x70 [ 3117.584427] do_syscall_64+0x73/0x160 [ 3117.584440] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.584455] RIP: 0033:0x7f5693f14b9a [ 3117.584456] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.584505] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.584510] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.584512] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.584514] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.584516] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.584519] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.584523] ---[ end trace a8e0d899985faf31 ]--- [ 3117.685663] F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix. [ 3117.685673] F2FS-fs (loop0): recover_data: ino = 2 (i_size: recover) recovered = 1, err = 0 [ 3117.685707] ================================================================== [ 3117.685955] BUG: KASAN: slab-out-of-bounds in __remove_dirty_segment+0xdd/0x1e0 [ 3117.686175] Read of size 8 at addr ffff88018f0a63d0 by task mount/1225 [ 3117.686477] CPU: 0 PID: 1225 Comm: mount Tainted: G W 4.17.0+ #1 [ 3117.686481] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.686483] Call Trace: [ 3117.686494] dump_stack+0x71/0xab [ 3117.686512] print_address_description+0x6b/0x290 [ 3117.686517] kasan_report+0x28e/0x390 [ 3117.686522] ? __remove_dirty_segment+0xdd/0x1e0 [ 3117.686527] __remove_dirty_segment+0xdd/0x1e0 [ 3117.686532] locate_dirty_segment+0x189/0x190 [ 3117.686538] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.686543] recover_data+0x703/0x2c20 [ 3117.686547] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.686553] ? ksys_mount+0x7e/0xd0 [ 3117.686564] ? policy_nodemask+0x1a/0x90 [ 3117.686567] ? policy_node+0x56/0x70 [ 3117.686571] ? add_fsync_inode+0xf0/0xf0 [ 3117.686592] ? blk_finish_plug+0x44/0x60 [ 3117.686597] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.686602] ? find_inode_fast+0xac/0xc0 [ 3117.686606] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.686618] ? __radix_tree_lookup+0x150/0x150 [ 3117.686633] ? dqget+0x670/0x670 [ 3117.686648] ? pagecache_get_page+0x29/0x410 [ 3117.686656] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.686660] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.686664] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.686670] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.686674] ? rb_insert_color+0x323/0x3d0 [ 3117.686678] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.686683] ? proc_register+0x153/0x1d0 [ 3117.686686] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.686695] ? f2fs_attr_store+0x50/0x50 [ 3117.686700] ? proc_create_single_data+0x52/0x60 [ 3117.686707] f2fs_fill_super+0x1d06/0x2b40 [ 3117.686728] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686735] ? sget_userns+0x65e/0x690 [ 3117.686740] ? set_blocksize+0x88/0x130 [ 3117.686745] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686748] mount_bdev+0x1c0/0x200 [ 3117.686753] mount_fs+0x5c/0x190 [ 3117.686758] vfs_kern_mount+0x64/0x190 [ 3117.686762] do_mount+0x2e4/0x1450 [ 3117.686769] ? lockref_put_return+0x130/0x130 [ 3117.686773] ? copy_mount_string+0x20/0x20 [ 3117.686777] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.686780] ? kasan_kmalloc+0xa6/0xd0 [ 3117.686786] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.686790] ? __kmalloc_track_caller+0x196/0x210 [ 3117.686795] ? _copy_from_user+0x61/0x90 [ 3117.686801] ? memdup_user+0x3e/0x60 [ 3117.686804] ksys_mount+0x7e/0xd0 [ 3117.686809] __x64_sys_mount+0x62/0x70 [ 3117.686816] do_syscall_64+0x73/0x160 [ 3117.686824] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.686829] RIP: 0033:0x7f5693f14b9a [ 3117.686830] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.686887] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.686892] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.686894] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.686896] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.686899] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.686901] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.687005] Allocated by task 1225: [ 3117.687152] kasan_kmalloc+0xa6/0xd0 [ 3117.687157] kmem_cache_alloc_trace+0xfd/0x200 [ 3117.687161] f2fs_build_segment_manager+0x2d09/0x3190 [ 3117.687165] f2fs_fill_super+0x1948/0x2b40 [ 3117.687168] mount_bdev+0x1c0/0x200 [ 3117.687171] mount_fs+0x5c/0x190 [ 3117.687174] vfs_kern_mount+0x64/0x190 [ 3117.687177] do_mount+0x2e4/0x1450 [ 3117.687180] ksys_mount+0x7e/0xd0 [ 3117.687182] __x64_sys_mount+0x62/0x70 [ 3117.687186] do_syscall_64+0x73/0x160 [ 3117.687190] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.687285] Freed by task 19: [ 3117.687412] __kasan_slab_free+0x137/0x190 [ 3117.687416] kfree+0x8b/0x1b0 [ 3117.687460] ttm_bo_man_put_node+0x61/0x80 [ttm] [ 3117.687476] ttm_bo_cleanup_refs+0x15f/0x250 [ttm] [ 3117.687492] ttm_bo_delayed_delete+0x2f0/0x300 [ttm] [ 3117.687507] ttm_bo_delayed_workqueue+0x17/0x50 [ttm] [ 3117.687528] process_one_work+0x2f9/0x740 [ 3117.687531] worker_thread+0x78/0x6b0 [ 3117.687541] kthread+0x177/0x1c0 [ 3117.687545] ret_from_fork+0x35/0x40 [ 3117.687638] The buggy address belongs to the object at ffff88018f0a6300 which belongs to the cache kmalloc-192 of size 192 [ 3117.688014] The buggy address is located 16 bytes to the right of 192-byte region [ffff88018f0a6300, ffff88018f0a63c0) [ 3117.688382] The buggy address belongs to the page: [ 3117.688554] page:ffffea00063c2980 count:1 mapcount:0 mapping:ffff8801f3403180 index:0x0 [ 3117.688788] flags: 0x17fff8000000100(slab) [ 3117.688944] raw: 017fff8000000100 ffffea00063c2840 0000000e0000000e ffff8801f3403180 [ 3117.689166] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 3117.689386] page dumped because: kasan: bad access detected [ 3117.689653] Memory state around the buggy address: [ 3117.689816] ffff88018f0a6280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3117.690027] ffff88018f0a6300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690239] >ffff88018f0a6380: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.690448] ^ [ 3117.690644] ffff88018f0a6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690868] ffff88018f0a6480: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.691077] ================================================================== [ 3117.691290] Disabling lock debugging due to kernel taint [ 3117.693893] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 3117.694120] PGD 80000001f01bc067 P4D 80000001f01bc067 PUD 1d9638067 PMD 0 [ 3117.694338] Oops: 0002 [#1] SMP KASAN PTI [ 3117.694490] CPU: 1 PID: 1225 Comm: mount Tainted: G B W 4.17.0+ #1 [ 3117.694703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.695073] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.695246] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.695793] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.695969] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.696182] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.696391] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.696604] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.696813] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.697032] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.697280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.702357] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.707235] Call Trace: [ 3117.712077] locate_dirty_segment+0x189/0x190 [ 3117.716891] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.721617] recover_data+0x703/0x2c20 [ 3117.726316] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.730957] ? ksys_mount+0x7e/0xd0 [ 3117.735573] ? policy_nodemask+0x1a/0x90 [ 3117.740198] ? policy_node+0x56/0x70 [ 3117.744829] ? add_fsync_inode+0xf0/0xf0 [ 3117.749487] ? blk_finish_plug+0x44/0x60 [ 3117.754152] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.758831] ? find_inode_fast+0xac/0xc0 [ 3117.763448] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.768046] ? __radix_tree_lookup+0x150/0x150 [ 3117.772603] ? dqget+0x670/0x670 [ 3117.777159] ? pagecache_get_page+0x29/0x410 [ 3117.781648] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.786067] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.790476] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.794790] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.799086] ? rb_insert_color+0x323/0x3d0 [ 3117.803304] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.807563] ? proc_register+0x153/0x1d0 [ 3117.811766] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.815947] ? f2fs_attr_store+0x50/0x50 [ 3117.820087] ? proc_create_single_data+0x52/0x60 [ 3117.824262] f2fs_fill_super+0x1d06/0x2b40 [ 3117.828367] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.832432] ? sget_userns+0x65e/0x690 [ 3117.836500] ? set_blocksize+0x88/0x130 [ 3117.840501] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.844420] mount_bdev+0x1c0/0x200 [ 3117.848275] mount_fs+0x5c/0x190 [ 3117.852053] vfs_kern_mount+0x64/0x190 [ 3117.855810] do_mount+0x2e4/0x1450 [ 3117.859441] ? lockref_put_return+0x130/0x130 [ 3117.862996] ? copy_mount_string+0x20/0x20 [ 3117.866417] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.869719] ? kasan_kmalloc+0xa6/0xd0 [ 3117.872948] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.876121] ? __kmalloc_track_caller+0x196/0x210 [ 3117.879333] ? _copy_from_user+0x61/0x90 [ 3117.882467] ? memdup_user+0x3e/0x60 [ 3117.885604] ksys_mount+0x7e/0xd0 [ 3117.888700] __x64_sys_mount+0x62/0x70 [ 3117.891742] do_syscall_64+0x73/0x160 [ 3117.894692] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.897669] RIP: 0033:0x7f5693f14b9a [ 3117.900563] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.906922] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.910159] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.913469] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.916764] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.920071] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.923393] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.926680] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.949979] CR2: 0000000000000000 [ 3117.954283] ---[ end trace a8e0d899985faf32 ]--- [ 3117.958575] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.962810] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.971789] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.976333] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.980926] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.985497] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.990098] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.994761] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.999392] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3118.004096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3118.008816] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 - Location https://elixir.bootlin.com/linux/v4.18-rc3/source/fs/f2fs/segment.c#L775 if (test_and_clear_bit(segno, dirty_i->dirty_segmap[t])) dirty_i->nr_dirty[t]--; Here dirty_i->dirty_segmap[t] can be NULL which leads to crash in test_and_clear_bit() Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:16:11 +08:00
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 20:34:12 +08:00
f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize during mount, in order to avoid accessing across cache boundary with this abnormal bitmap size. - Overview buffer overrun in build_sit_info() when mounting a crafted f2fs image - Reproduce - Kernel message [ 548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.584979] ================================================================== [ 548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50 [ 548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295 [ 548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.589438] Call Trace: [ 548.589474] dump_stack+0x7b/0xb5 [ 548.589487] print_address_description+0x70/0x290 [ 548.589492] kasan_report+0x291/0x390 [ 548.589496] ? kmemdup+0x36/0x50 [ 548.589509] check_memory_region+0x139/0x190 [ 548.589514] memcpy+0x23/0x50 [ 548.589518] kmemdup+0x36/0x50 [ 548.589545] f2fs_build_segment_manager+0x8fa/0x3410 [ 548.589551] ? __asan_loadN+0xf/0x20 [ 548.589560] ? f2fs_sanity_check_ckpt+0x1be/0x240 [ 548.589566] ? f2fs_flush_sit_entries+0x10c0/0x10c0 [ 548.589587] ? __put_user_ns+0x40/0x40 [ 548.589604] ? find_next_bit+0x57/0x90 [ 548.589610] f2fs_fill_super+0x194b/0x2b40 [ 548.589617] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589637] ? set_blocksize+0x90/0x140 [ 548.589651] mount_bdev+0x1c5/0x210 [ 548.589655] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589667] f2fs_mount+0x15/0x20 [ 548.589672] mount_fs+0x60/0x1a0 [ 548.589683] ? alloc_vfsmnt+0x309/0x360 [ 548.589688] vfs_kern_mount+0x6b/0x1a0 [ 548.589699] do_mount+0x34a/0x18c0 [ 548.589710] ? lockref_put_or_lock+0xcf/0x160 [ 548.589716] ? copy_mount_string+0x20/0x20 [ 548.589728] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.589734] ? kasan_check_write+0x14/0x20 [ 548.589740] ? _copy_from_user+0x6a/0x90 [ 548.589744] ? memdup_user+0x42/0x60 [ 548.589750] ksys_mount+0x83/0xd0 [ 548.589755] __x64_sys_mount+0x67/0x80 [ 548.589781] do_syscall_64+0x78/0x170 [ 548.589797] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.589820] RIP: 0033:0x7f76fc331b9a [ 548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.590242] The buggy address belongs to the page: [ 548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 548.592886] flags: 0x2ffff0000000000() [ 548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 548.603713] page dumped because: kasan: bad access detected [ 548.605203] Memory state around the buggy address: [ 548.606198] ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.607676] ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.610629] ^ [ 548.612088] ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.613674] ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.615141] ================================================================== [ 548.616613] Disabling lock debugging due to kernel taint [ 548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420 [ 548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G B 4.18.0-rc1+ #4 [ 548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420 [ 548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b [ 548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246 [ 548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7 [ 548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000 [ 548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5 [ 548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040 [ 548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938 [ 548.623299] FS: 00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 548.623302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0 [ 548.623317] Call Trace: [ 548.623325] ? kasan_check_read+0x11/0x20 [ 548.623330] ? __zone_watermark_ok+0x92/0x240 [ 548.623336] ? get_page_from_freelist+0x1c3/0x1d90 [ 548.623347] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 548.623353] ? warn_alloc+0x250/0x250 [ 548.623358] ? save_stack+0x46/0xd0 [ 548.623361] ? kasan_kmalloc+0xad/0xe0 [ 548.623366] ? __isolate_free_page+0x2a0/0x2a0 [ 548.623370] ? mount_fs+0x60/0x1a0 [ 548.623374] ? vfs_kern_mount+0x6b/0x1a0 [ 548.623378] ? do_mount+0x34a/0x18c0 [ 548.623383] ? ksys_mount+0x83/0xd0 [ 548.623387] ? __x64_sys_mount+0x67/0x80 [ 548.623391] ? do_syscall_64+0x78/0x170 [ 548.623396] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623401] __alloc_pages_nodemask+0x3c5/0x400 [ 548.623407] ? __alloc_pages_slowpath+0x1420/0x1420 [ 548.623412] ? __mutex_lock_slowpath+0x20/0x20 [ 548.623417] ? kvmalloc_node+0x31/0x80 [ 548.623424] alloc_pages_current+0x75/0x110 [ 548.623436] kmalloc_order+0x24/0x60 [ 548.623442] kmalloc_order_trace+0x24/0xb0 [ 548.623448] __kmalloc_track_caller+0x207/0x220 [ 548.623455] ? f2fs_build_node_manager+0x399/0xbb0 [ 548.623460] kmemdup+0x20/0x50 [ 548.623465] f2fs_build_node_manager+0x399/0xbb0 [ 548.623470] f2fs_fill_super+0x195e/0x2b40 [ 548.623477] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623481] ? set_blocksize+0x90/0x140 [ 548.623486] mount_bdev+0x1c5/0x210 [ 548.623489] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623495] f2fs_mount+0x15/0x20 [ 548.623498] mount_fs+0x60/0x1a0 [ 548.623503] ? alloc_vfsmnt+0x309/0x360 [ 548.623508] vfs_kern_mount+0x6b/0x1a0 [ 548.623513] do_mount+0x34a/0x18c0 [ 548.623518] ? lockref_put_or_lock+0xcf/0x160 [ 548.623523] ? copy_mount_string+0x20/0x20 [ 548.623528] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.623533] ? kasan_check_write+0x14/0x20 [ 548.623537] ? _copy_from_user+0x6a/0x90 [ 548.623542] ? memdup_user+0x42/0x60 [ 548.623547] ksys_mount+0x83/0xd0 [ 548.623552] __x64_sys_mount+0x67/0x80 [ 548.623557] do_syscall_64+0x78/0x170 [ 548.623562] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623566] RIP: 0033:0x7f76fc331b9a [ 548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.623650] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager [ 548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578 sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL); Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size. Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-23 11:25:19 +08:00
f2fs: fix to do sanity check with user_block_count This patch fixs to do sanity check with user_block_count. - Overview Divide zero in utilization when mount() a corrupted f2fs image - Reproduce (4.18 upstream kernel) - Kernel message [ 564.099503] F2FS-fs (loop0): invalid crc value [ 564.101991] divide error: 0000 [#1] SMP KASAN PTI [ 564.103103] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Not tainted 4.18.0-rc1+ #4 [ 564.104584] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.106624] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.107692] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.111686] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.112775] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.114250] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.115706] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.117177] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.118634] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.120094] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.121748] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.122923] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.124383] Call Trace: [ 564.124924] ? __issue_discard_cmd+0x480/0x480 [ 564.125882] ? __sched_text_start+0x8/0x8 [ 564.126756] ? __kthread_parkme+0xcb/0x100 [ 564.127620] ? kthread_blkcg+0x70/0x70 [ 564.128412] kthread+0x180/0x1d0 [ 564.129105] ? __issue_discard_cmd+0x480/0x480 [ 564.130029] ? kthread_associate_blkcg+0x150/0x150 [ 564.131033] ret_from_fork+0x35/0x40 [ 564.131794] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 564.141798] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 564.142773] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.143885] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.147776] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.148856] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.150424] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.151906] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.153463] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.154915] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.156405] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.158070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.159279] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.161043] ================================================================== [ 564.162587] BUG: KASAN: stack-out-of-bounds in from_kuid_munged+0x1d/0x50 [ 564.163994] Read of size 4 at addr ffff8801f3117c84 by task f2fs_discard-7:/1298 [ 564.165852] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Tainted: G D 4.18.0-rc1+ #4 [ 564.167593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.169522] Call Trace: [ 564.170057] dump_stack+0x7b/0xb5 [ 564.170778] print_address_description+0x70/0x290 [ 564.171765] kasan_report+0x291/0x390 [ 564.172540] ? from_kuid_munged+0x1d/0x50 [ 564.173408] __asan_load4+0x78/0x80 [ 564.174148] from_kuid_munged+0x1d/0x50 [ 564.174962] do_notify_parent+0x1f5/0x4f0 [ 564.175808] ? send_sigqueue+0x390/0x390 [ 564.176639] ? css_set_move_task+0x152/0x340 [ 564.184197] do_exit+0x1290/0x1390 [ 564.184950] ? __issue_discard_cmd+0x480/0x480 [ 564.185884] ? mm_update_next_owner+0x380/0x380 [ 564.186829] ? __sched_text_start+0x8/0x8 [ 564.187672] ? __kthread_parkme+0xcb/0x100 [ 564.188528] ? kthread_blkcg+0x70/0x70 [ 564.189333] ? kthread+0x180/0x1d0 [ 564.190052] ? __issue_discard_cmd+0x480/0x480 [ 564.190983] rewind_stack_do_exit+0x17/0x20 [ 564.192190] The buggy address belongs to the page: [ 564.193213] page:ffffea0007cc45c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 564.194856] flags: 0x2ffff0000000000() [ 564.195644] raw: 02ffff0000000000 0000000000000000 dead000000000200 0000000000000000 [ 564.197247] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 564.198826] page dumped because: kasan: bad access detected [ 564.200299] Memory state around the buggy address: [ 564.201306] ffff8801f3117b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.202779] ffff8801f3117c00: 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 [ 564.204252] >ffff8801f3117c80: f3 f3 f3 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 564.205742] ^ [ 564.206424] ffff8801f3117d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.207908] ffff8801f3117d80: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 [ 564.209389] ================================================================== [ 564.231795] F2FS-fs (loop0): Mounted with checkpoint version = 2 - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L586 return div_u64((u64)valid_user_blocks(sbi) * 100, sbi->user_block_count); Missing checks on sbi->user_block_count. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-27 18:05:54 +08:00
f2fs: fix to do sanity check with user_block_count This patch fixs to do sanity check with user_block_count. - Overview Divide zero in utilization when mount() a corrupted f2fs image - Reproduce (4.18 upstream kernel) - Kernel message [ 564.099503] F2FS-fs (loop0): invalid crc value [ 564.101991] divide error: 0000 [#1] SMP KASAN PTI [ 564.103103] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Not tainted 4.18.0-rc1+ #4 [ 564.104584] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.106624] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.107692] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.111686] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.112775] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.114250] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.115706] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.117177] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.118634] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.120094] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.121748] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.122923] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.124383] Call Trace: [ 564.124924] ? __issue_discard_cmd+0x480/0x480 [ 564.125882] ? __sched_text_start+0x8/0x8 [ 564.126756] ? __kthread_parkme+0xcb/0x100 [ 564.127620] ? kthread_blkcg+0x70/0x70 [ 564.128412] kthread+0x180/0x1d0 [ 564.129105] ? __issue_discard_cmd+0x480/0x480 [ 564.130029] ? kthread_associate_blkcg+0x150/0x150 [ 564.131033] ret_from_fork+0x35/0x40 [ 564.131794] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 564.141798] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 564.142773] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.143885] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.147776] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.148856] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.150424] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.151906] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.153463] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.154915] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.156405] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.158070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.159279] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.161043] ================================================================== [ 564.162587] BUG: KASAN: stack-out-of-bounds in from_kuid_munged+0x1d/0x50 [ 564.163994] Read of size 4 at addr ffff8801f3117c84 by task f2fs_discard-7:/1298 [ 564.165852] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Tainted: G D 4.18.0-rc1+ #4 [ 564.167593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.169522] Call Trace: [ 564.170057] dump_stack+0x7b/0xb5 [ 564.170778] print_address_description+0x70/0x290 [ 564.171765] kasan_report+0x291/0x390 [ 564.172540] ? from_kuid_munged+0x1d/0x50 [ 564.173408] __asan_load4+0x78/0x80 [ 564.174148] from_kuid_munged+0x1d/0x50 [ 564.174962] do_notify_parent+0x1f5/0x4f0 [ 564.175808] ? send_sigqueue+0x390/0x390 [ 564.176639] ? css_set_move_task+0x152/0x340 [ 564.184197] do_exit+0x1290/0x1390 [ 564.184950] ? __issue_discard_cmd+0x480/0x480 [ 564.185884] ? mm_update_next_owner+0x380/0x380 [ 564.186829] ? __sched_text_start+0x8/0x8 [ 564.187672] ? __kthread_parkme+0xcb/0x100 [ 564.188528] ? kthread_blkcg+0x70/0x70 [ 564.189333] ? kthread+0x180/0x1d0 [ 564.190052] ? __issue_discard_cmd+0x480/0x480 [ 564.190983] rewind_stack_do_exit+0x17/0x20 [ 564.192190] The buggy address belongs to the page: [ 564.193213] page:ffffea0007cc45c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 564.194856] flags: 0x2ffff0000000000() [ 564.195644] raw: 02ffff0000000000 0000000000000000 dead000000000200 0000000000000000 [ 564.197247] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 564.198826] page dumped because: kasan: bad access detected [ 564.200299] Memory state around the buggy address: [ 564.201306] ffff8801f3117b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.202779] ffff8801f3117c00: 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 [ 564.204252] >ffff8801f3117c80: f3 f3 f3 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 564.205742] ^ [ 564.206424] ffff8801f3117d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.207908] ffff8801f3117d80: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 [ 564.209389] ================================================================== [ 564.231795] F2FS-fs (loop0): Mounted with checkpoint version = 2 - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L586 return div_u64((u64)valid_user_blocks(sbi) * 100, sbi->user_block_count); Missing checks on sbi->user_block_count. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-27 18:05:54 +08:00
f2fs: fix to do sanity check with user_block_count This patch fixs to do sanity check with user_block_count. - Overview Divide zero in utilization when mount() a corrupted f2fs image - Reproduce (4.18 upstream kernel) - Kernel message [ 564.099503] F2FS-fs (loop0): invalid crc value [ 564.101991] divide error: 0000 [#1] SMP KASAN PTI [ 564.103103] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Not tainted 4.18.0-rc1+ #4 [ 564.104584] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.106624] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.107692] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.111686] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.112775] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.114250] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.115706] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.117177] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.118634] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.120094] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.121748] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.122923] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.124383] Call Trace: [ 564.124924] ? __issue_discard_cmd+0x480/0x480 [ 564.125882] ? __sched_text_start+0x8/0x8 [ 564.126756] ? __kthread_parkme+0xcb/0x100 [ 564.127620] ? kthread_blkcg+0x70/0x70 [ 564.128412] kthread+0x180/0x1d0 [ 564.129105] ? __issue_discard_cmd+0x480/0x480 [ 564.130029] ? kthread_associate_blkcg+0x150/0x150 [ 564.131033] ret_from_fork+0x35/0x40 [ 564.131794] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 564.141798] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 564.142773] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.143885] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.147776] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.148856] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.150424] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.151906] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.153463] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.154915] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.156405] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.158070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.159279] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.161043] ================================================================== [ 564.162587] BUG: KASAN: stack-out-of-bounds in from_kuid_munged+0x1d/0x50 [ 564.163994] Read of size 4 at addr ffff8801f3117c84 by task f2fs_discard-7:/1298 [ 564.165852] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Tainted: G D 4.18.0-rc1+ #4 [ 564.167593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.169522] Call Trace: [ 564.170057] dump_stack+0x7b/0xb5 [ 564.170778] print_address_description+0x70/0x290 [ 564.171765] kasan_report+0x291/0x390 [ 564.172540] ? from_kuid_munged+0x1d/0x50 [ 564.173408] __asan_load4+0x78/0x80 [ 564.174148] from_kuid_munged+0x1d/0x50 [ 564.174962] do_notify_parent+0x1f5/0x4f0 [ 564.175808] ? send_sigqueue+0x390/0x390 [ 564.176639] ? css_set_move_task+0x152/0x340 [ 564.184197] do_exit+0x1290/0x1390 [ 564.184950] ? __issue_discard_cmd+0x480/0x480 [ 564.185884] ? mm_update_next_owner+0x380/0x380 [ 564.186829] ? __sched_text_start+0x8/0x8 [ 564.187672] ? __kthread_parkme+0xcb/0x100 [ 564.188528] ? kthread_blkcg+0x70/0x70 [ 564.189333] ? kthread+0x180/0x1d0 [ 564.190052] ? __issue_discard_cmd+0x480/0x480 [ 564.190983] rewind_stack_do_exit+0x17/0x20 [ 564.192190] The buggy address belongs to the page: [ 564.193213] page:ffffea0007cc45c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 564.194856] flags: 0x2ffff0000000000() [ 564.195644] raw: 02ffff0000000000 0000000000000000 dead000000000200 0000000000000000 [ 564.197247] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 564.198826] page dumped because: kasan: bad access detected [ 564.200299] Memory state around the buggy address: [ 564.201306] ffff8801f3117b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.202779] ffff8801f3117c00: 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 [ 564.204252] >ffff8801f3117c80: f3 f3 f3 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 564.205742] ^ [ 564.206424] ffff8801f3117d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.207908] ffff8801f3117d80: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 [ 564.209389] ================================================================== [ 564.231795] F2FS-fs (loop0): Mounted with checkpoint version = 2 - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L586 return div_u64((u64)valid_user_blocks(sbi) * 100, sbi->user_block_count); Missing checks on sbi->user_block_count. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-27 18:05:54 +08:00
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 20:34:12 +08:00
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 20:34:12 +08:00
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 20:34:12 +08:00
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 20:34:12 +08:00
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 20:34:12 +08:00
f2fs: fix to do sanity check with current segment number https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-09-06 20:34:12 +08:00
f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize during mount, in order to avoid accessing across cache boundary with this abnormal bitmap size. - Overview buffer overrun in build_sit_info() when mounting a crafted f2fs image - Reproduce - Kernel message [ 548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.584979] ================================================================== [ 548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50 [ 548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295 [ 548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.589438] Call Trace: [ 548.589474] dump_stack+0x7b/0xb5 [ 548.589487] print_address_description+0x70/0x290 [ 548.589492] kasan_report+0x291/0x390 [ 548.589496] ? kmemdup+0x36/0x50 [ 548.589509] check_memory_region+0x139/0x190 [ 548.589514] memcpy+0x23/0x50 [ 548.589518] kmemdup+0x36/0x50 [ 548.589545] f2fs_build_segment_manager+0x8fa/0x3410 [ 548.589551] ? __asan_loadN+0xf/0x20 [ 548.589560] ? f2fs_sanity_check_ckpt+0x1be/0x240 [ 548.589566] ? f2fs_flush_sit_entries+0x10c0/0x10c0 [ 548.589587] ? __put_user_ns+0x40/0x40 [ 548.589604] ? find_next_bit+0x57/0x90 [ 548.589610] f2fs_fill_super+0x194b/0x2b40 [ 548.589617] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589637] ? set_blocksize+0x90/0x140 [ 548.589651] mount_bdev+0x1c5/0x210 [ 548.589655] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589667] f2fs_mount+0x15/0x20 [ 548.589672] mount_fs+0x60/0x1a0 [ 548.589683] ? alloc_vfsmnt+0x309/0x360 [ 548.589688] vfs_kern_mount+0x6b/0x1a0 [ 548.589699] do_mount+0x34a/0x18c0 [ 548.589710] ? lockref_put_or_lock+0xcf/0x160 [ 548.589716] ? copy_mount_string+0x20/0x20 [ 548.589728] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.589734] ? kasan_check_write+0x14/0x20 [ 548.589740] ? _copy_from_user+0x6a/0x90 [ 548.589744] ? memdup_user+0x42/0x60 [ 548.589750] ksys_mount+0x83/0xd0 [ 548.589755] __x64_sys_mount+0x67/0x80 [ 548.589781] do_syscall_64+0x78/0x170 [ 548.589797] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.589820] RIP: 0033:0x7f76fc331b9a [ 548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.590242] The buggy address belongs to the page: [ 548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 548.592886] flags: 0x2ffff0000000000() [ 548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 548.603713] page dumped because: kasan: bad access detected [ 548.605203] Memory state around the buggy address: [ 548.606198] ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.607676] ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.610629] ^ [ 548.612088] ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.613674] ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.615141] ================================================================== [ 548.616613] Disabling lock debugging due to kernel taint [ 548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420 [ 548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G B 4.18.0-rc1+ #4 [ 548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420 [ 548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b [ 548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246 [ 548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7 [ 548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000 [ 548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5 [ 548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040 [ 548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938 [ 548.623299] FS: 00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 548.623302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0 [ 548.623317] Call Trace: [ 548.623325] ? kasan_check_read+0x11/0x20 [ 548.623330] ? __zone_watermark_ok+0x92/0x240 [ 548.623336] ? get_page_from_freelist+0x1c3/0x1d90 [ 548.623347] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 548.623353] ? warn_alloc+0x250/0x250 [ 548.623358] ? save_stack+0x46/0xd0 [ 548.623361] ? kasan_kmalloc+0xad/0xe0 [ 548.623366] ? __isolate_free_page+0x2a0/0x2a0 [ 548.623370] ? mount_fs+0x60/0x1a0 [ 548.623374] ? vfs_kern_mount+0x6b/0x1a0 [ 548.623378] ? do_mount+0x34a/0x18c0 [ 548.623383] ? ksys_mount+0x83/0xd0 [ 548.623387] ? __x64_sys_mount+0x67/0x80 [ 548.623391] ? do_syscall_64+0x78/0x170 [ 548.623396] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623401] __alloc_pages_nodemask+0x3c5/0x400 [ 548.623407] ? __alloc_pages_slowpath+0x1420/0x1420 [ 548.623412] ? __mutex_lock_slowpath+0x20/0x20 [ 548.623417] ? kvmalloc_node+0x31/0x80 [ 548.623424] alloc_pages_current+0x75/0x110 [ 548.623436] kmalloc_order+0x24/0x60 [ 548.623442] kmalloc_order_trace+0x24/0xb0 [ 548.623448] __kmalloc_track_caller+0x207/0x220 [ 548.623455] ? f2fs_build_node_manager+0x399/0xbb0 [ 548.623460] kmemdup+0x20/0x50 [ 548.623465] f2fs_build_node_manager+0x399/0xbb0 [ 548.623470] f2fs_fill_super+0x195e/0x2b40 [ 548.623477] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623481] ? set_blocksize+0x90/0x140 [ 548.623486] mount_bdev+0x1c5/0x210 [ 548.623489] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623495] f2fs_mount+0x15/0x20 [ 548.623498] mount_fs+0x60/0x1a0 [ 548.623503] ? alloc_vfsmnt+0x309/0x360 [ 548.623508] vfs_kern_mount+0x6b/0x1a0 [ 548.623513] do_mount+0x34a/0x18c0 [ 548.623518] ? lockref_put_or_lock+0xcf/0x160 [ 548.623523] ? copy_mount_string+0x20/0x20 [ 548.623528] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.623533] ? kasan_check_write+0x14/0x20 [ 548.623537] ? _copy_from_user+0x6a/0x90 [ 548.623542] ? memdup_user+0x42/0x60 [ 548.623547] ksys_mount+0x83/0xd0 [ 548.623552] __x64_sys_mount+0x67/0x80 [ 548.623557] do_syscall_64+0x78/0x170 [ 548.623562] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623566] RIP: 0033:0x7f76fc331b9a [ 548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.623650] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager [ 548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578 sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL); Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size. Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-23 11:25:19 +08:00
f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize during mount, in order to avoid accessing across cache boundary with this abnormal bitmap size. - Overview buffer overrun in build_sit_info() when mounting a crafted f2fs image - Reproduce - Kernel message [ 548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.584979] ================================================================== [ 548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50 [ 548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295 [ 548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.589438] Call Trace: [ 548.589474] dump_stack+0x7b/0xb5 [ 548.589487] print_address_description+0x70/0x290 [ 548.589492] kasan_report+0x291/0x390 [ 548.589496] ? kmemdup+0x36/0x50 [ 548.589509] check_memory_region+0x139/0x190 [ 548.589514] memcpy+0x23/0x50 [ 548.589518] kmemdup+0x36/0x50 [ 548.589545] f2fs_build_segment_manager+0x8fa/0x3410 [ 548.589551] ? __asan_loadN+0xf/0x20 [ 548.589560] ? f2fs_sanity_check_ckpt+0x1be/0x240 [ 548.589566] ? f2fs_flush_sit_entries+0x10c0/0x10c0 [ 548.589587] ? __put_user_ns+0x40/0x40 [ 548.589604] ? find_next_bit+0x57/0x90 [ 548.589610] f2fs_fill_super+0x194b/0x2b40 [ 548.589617] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589637] ? set_blocksize+0x90/0x140 [ 548.589651] mount_bdev+0x1c5/0x210 [ 548.589655] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589667] f2fs_mount+0x15/0x20 [ 548.589672] mount_fs+0x60/0x1a0 [ 548.589683] ? alloc_vfsmnt+0x309/0x360 [ 548.589688] vfs_kern_mount+0x6b/0x1a0 [ 548.589699] do_mount+0x34a/0x18c0 [ 548.589710] ? lockref_put_or_lock+0xcf/0x160 [ 548.589716] ? copy_mount_string+0x20/0x20 [ 548.589728] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.589734] ? kasan_check_write+0x14/0x20 [ 548.589740] ? _copy_from_user+0x6a/0x90 [ 548.589744] ? memdup_user+0x42/0x60 [ 548.589750] ksys_mount+0x83/0xd0 [ 548.589755] __x64_sys_mount+0x67/0x80 [ 548.589781] do_syscall_64+0x78/0x170 [ 548.589797] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.589820] RIP: 0033:0x7f76fc331b9a [ 548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.590242] The buggy address belongs to the page: [ 548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 548.592886] flags: 0x2ffff0000000000() [ 548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 548.603713] page dumped because: kasan: bad access detected [ 548.605203] Memory state around the buggy address: [ 548.606198] ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.607676] ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.610629] ^ [ 548.612088] ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.613674] ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.615141] ================================================================== [ 548.616613] Disabling lock debugging due to kernel taint [ 548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420 [ 548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G B 4.18.0-rc1+ #4 [ 548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420 [ 548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b [ 548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246 [ 548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7 [ 548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000 [ 548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5 [ 548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040 [ 548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938 [ 548.623299] FS: 00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 548.623302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0 [ 548.623317] Call Trace: [ 548.623325] ? kasan_check_read+0x11/0x20 [ 548.623330] ? __zone_watermark_ok+0x92/0x240 [ 548.623336] ? get_page_from_freelist+0x1c3/0x1d90 [ 548.623347] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 548.623353] ? warn_alloc+0x250/0x250 [ 548.623358] ? save_stack+0x46/0xd0 [ 548.623361] ? kasan_kmalloc+0xad/0xe0 [ 548.623366] ? __isolate_free_page+0x2a0/0x2a0 [ 548.623370] ? mount_fs+0x60/0x1a0 [ 548.623374] ? vfs_kern_mount+0x6b/0x1a0 [ 548.623378] ? do_mount+0x34a/0x18c0 [ 548.623383] ? ksys_mount+0x83/0xd0 [ 548.623387] ? __x64_sys_mount+0x67/0x80 [ 548.623391] ? do_syscall_64+0x78/0x170 [ 548.623396] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623401] __alloc_pages_nodemask+0x3c5/0x400 [ 548.623407] ? __alloc_pages_slowpath+0x1420/0x1420 [ 548.623412] ? __mutex_lock_slowpath+0x20/0x20 [ 548.623417] ? kvmalloc_node+0x31/0x80 [ 548.623424] alloc_pages_current+0x75/0x110 [ 548.623436] kmalloc_order+0x24/0x60 [ 548.623442] kmalloc_order_trace+0x24/0xb0 [ 548.623448] __kmalloc_track_caller+0x207/0x220 [ 548.623455] ? f2fs_build_node_manager+0x399/0xbb0 [ 548.623460] kmemdup+0x20/0x50 [ 548.623465] f2fs_build_node_manager+0x399/0xbb0 [ 548.623470] f2fs_fill_super+0x195e/0x2b40 [ 548.623477] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623481] ? set_blocksize+0x90/0x140 [ 548.623486] mount_bdev+0x1c5/0x210 [ 548.623489] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623495] f2fs_mount+0x15/0x20 [ 548.623498] mount_fs+0x60/0x1a0 [ 548.623503] ? alloc_vfsmnt+0x309/0x360 [ 548.623508] vfs_kern_mount+0x6b/0x1a0 [ 548.623513] do_mount+0x34a/0x18c0 [ 548.623518] ? lockref_put_or_lock+0xcf/0x160 [ 548.623523] ? copy_mount_string+0x20/0x20 [ 548.623528] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.623533] ? kasan_check_write+0x14/0x20 [ 548.623537] ? _copy_from_user+0x6a/0x90 [ 548.623542] ? memdup_user+0x42/0x60 [ 548.623547] ksys_mount+0x83/0xd0 [ 548.623552] __x64_sys_mount+0x67/0x80 [ 548.623557] do_syscall_64+0x78/0x170 [ 548.623562] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623566] RIP: 0033:0x7f76fc331b9a [ 548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.623650] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager [ 548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578 sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL); Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size. Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-23 11:25:19 +08:00
f2fs: fix to do sanity check with cp_pack_start_sum After fuzzing, cp_pack_start_sum could be corrupted, so current log's summary info should be wrong due to loading incorrect summary block. Then, if segment's type in current log is exceeded NR_CURSEG_TYPE, it can lead accessing invalid dirty_i->dirty_segmap bitmap finally. Add sanity check for cp_pack_start_sum to fix this issue. https://bugzilla.kernel.org/show_bug.cgi?id=200419 - Reproduce - Kernel message (f2fs-dev w/ KASAN) [ 3117.578432] F2FS-fs (loop0): Invalid log blocks per segment (8) [ 3117.578445] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock [ 3117.581364] F2FS-fs (loop0): invalid crc_offset: 30716 [ 3117.583564] WARNING: CPU: 1 PID: 1225 at fs/f2fs/checkpoint.c:90 __get_meta_page+0x448/0x4b0 [ 3117.583570] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.584014] CPU: 1 PID: 1225 Comm: mount Not tainted 4.17.0+ #1 [ 3117.584017] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.584022] RIP: 0010:__get_meta_page+0x448/0x4b0 [ 3117.584023] Code: 00 49 8d bc 24 84 00 00 00 e8 74 54 da ff 41 83 8c 24 84 00 00 00 08 4c 89 f6 4c 89 ef e8 c0 d9 95 00 48 89 ef e8 18 e3 00 00 <0f> 0b f0 80 4d 48 04 e9 0f fe ff ff 0f 0b 48 89 c7 48 89 04 24 e8 [ 3117.584072] RSP: 0018:ffff88018eb678c0 EFLAGS: 00010286 [ 3117.584082] RAX: ffff88018f0a6a78 RBX: ffffea0007a46600 RCX: ffffffff9314d1b2 [ 3117.584085] RDX: ffffffff00000001 RSI: 0000000000000000 RDI: ffff88018f0a6a98 [ 3117.584087] RBP: ffff88018ebe9980 R08: 0000000000000002 R09: 0000000000000001 [ 3117.584090] R10: 0000000000000001 R11: ffffed00326e4450 R12: ffff880193722200 [ 3117.584092] R13: ffff88018ebe9afc R14: 0000000000000206 R15: ffff88018eb67900 [ 3117.584096] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.584098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.584101] CR2: 00000000016f21b8 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.584112] Call Trace: [ 3117.584121] ? f2fs_set_meta_page_dirty+0x150/0x150 [ 3117.584127] ? f2fs_build_segment_manager+0xbf9/0x3190 [ 3117.584133] ? f2fs_npages_for_summary_flush+0x75/0x120 [ 3117.584145] f2fs_build_segment_manager+0xda8/0x3190 [ 3117.584151] ? f2fs_get_valid_checkpoint+0x298/0xa00 [ 3117.584156] ? f2fs_flush_sit_entries+0x10e0/0x10e0 [ 3117.584184] ? map_id_range_down+0x17c/0x1b0 [ 3117.584188] ? __put_user_ns+0x30/0x30 [ 3117.584206] ? find_next_bit+0x53/0x90 [ 3117.584237] ? cpumask_next+0x16/0x20 [ 3117.584249] f2fs_fill_super+0x1948/0x2b40 [ 3117.584258] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584279] ? sget_userns+0x65e/0x690 [ 3117.584296] ? set_blocksize+0x88/0x130 [ 3117.584302] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584305] mount_bdev+0x1c0/0x200 [ 3117.584310] mount_fs+0x5c/0x190 [ 3117.584320] vfs_kern_mount+0x64/0x190 [ 3117.584330] do_mount+0x2e4/0x1450 [ 3117.584343] ? lockref_put_return+0x130/0x130 [ 3117.584347] ? copy_mount_string+0x20/0x20 [ 3117.584357] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.584362] ? kasan_kmalloc+0xa6/0xd0 [ 3117.584373] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.584377] ? __kmalloc_track_caller+0x196/0x210 [ 3117.584383] ? _copy_from_user+0x61/0x90 [ 3117.584396] ? memdup_user+0x3e/0x60 [ 3117.584401] ksys_mount+0x7e/0xd0 [ 3117.584405] __x64_sys_mount+0x62/0x70 [ 3117.584427] do_syscall_64+0x73/0x160 [ 3117.584440] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.584455] RIP: 0033:0x7f5693f14b9a [ 3117.584456] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.584505] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.584510] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.584512] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.584514] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.584516] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.584519] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.584523] ---[ end trace a8e0d899985faf31 ]--- [ 3117.685663] F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix. [ 3117.685673] F2FS-fs (loop0): recover_data: ino = 2 (i_size: recover) recovered = 1, err = 0 [ 3117.685707] ================================================================== [ 3117.685955] BUG: KASAN: slab-out-of-bounds in __remove_dirty_segment+0xdd/0x1e0 [ 3117.686175] Read of size 8 at addr ffff88018f0a63d0 by task mount/1225 [ 3117.686477] CPU: 0 PID: 1225 Comm: mount Tainted: G W 4.17.0+ #1 [ 3117.686481] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.686483] Call Trace: [ 3117.686494] dump_stack+0x71/0xab [ 3117.686512] print_address_description+0x6b/0x290 [ 3117.686517] kasan_report+0x28e/0x390 [ 3117.686522] ? __remove_dirty_segment+0xdd/0x1e0 [ 3117.686527] __remove_dirty_segment+0xdd/0x1e0 [ 3117.686532] locate_dirty_segment+0x189/0x190 [ 3117.686538] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.686543] recover_data+0x703/0x2c20 [ 3117.686547] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.686553] ? ksys_mount+0x7e/0xd0 [ 3117.686564] ? policy_nodemask+0x1a/0x90 [ 3117.686567] ? policy_node+0x56/0x70 [ 3117.686571] ? add_fsync_inode+0xf0/0xf0 [ 3117.686592] ? blk_finish_plug+0x44/0x60 [ 3117.686597] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.686602] ? find_inode_fast+0xac/0xc0 [ 3117.686606] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.686618] ? __radix_tree_lookup+0x150/0x150 [ 3117.686633] ? dqget+0x670/0x670 [ 3117.686648] ? pagecache_get_page+0x29/0x410 [ 3117.686656] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.686660] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.686664] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.686670] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.686674] ? rb_insert_color+0x323/0x3d0 [ 3117.686678] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.686683] ? proc_register+0x153/0x1d0 [ 3117.686686] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.686695] ? f2fs_attr_store+0x50/0x50 [ 3117.686700] ? proc_create_single_data+0x52/0x60 [ 3117.686707] f2fs_fill_super+0x1d06/0x2b40 [ 3117.686728] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686735] ? sget_userns+0x65e/0x690 [ 3117.686740] ? set_blocksize+0x88/0x130 [ 3117.686745] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686748] mount_bdev+0x1c0/0x200 [ 3117.686753] mount_fs+0x5c/0x190 [ 3117.686758] vfs_kern_mount+0x64/0x190 [ 3117.686762] do_mount+0x2e4/0x1450 [ 3117.686769] ? lockref_put_return+0x130/0x130 [ 3117.686773] ? copy_mount_string+0x20/0x20 [ 3117.686777] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.686780] ? kasan_kmalloc+0xa6/0xd0 [ 3117.686786] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.686790] ? __kmalloc_track_caller+0x196/0x210 [ 3117.686795] ? _copy_from_user+0x61/0x90 [ 3117.686801] ? memdup_user+0x3e/0x60 [ 3117.686804] ksys_mount+0x7e/0xd0 [ 3117.686809] __x64_sys_mount+0x62/0x70 [ 3117.686816] do_syscall_64+0x73/0x160 [ 3117.686824] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.686829] RIP: 0033:0x7f5693f14b9a [ 3117.686830] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.686887] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.686892] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.686894] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.686896] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.686899] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.686901] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.687005] Allocated by task 1225: [ 3117.687152] kasan_kmalloc+0xa6/0xd0 [ 3117.687157] kmem_cache_alloc_trace+0xfd/0x200 [ 3117.687161] f2fs_build_segment_manager+0x2d09/0x3190 [ 3117.687165] f2fs_fill_super+0x1948/0x2b40 [ 3117.687168] mount_bdev+0x1c0/0x200 [ 3117.687171] mount_fs+0x5c/0x190 [ 3117.687174] vfs_kern_mount+0x64/0x190 [ 3117.687177] do_mount+0x2e4/0x1450 [ 3117.687180] ksys_mount+0x7e/0xd0 [ 3117.687182] __x64_sys_mount+0x62/0x70 [ 3117.687186] do_syscall_64+0x73/0x160 [ 3117.687190] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.687285] Freed by task 19: [ 3117.687412] __kasan_slab_free+0x137/0x190 [ 3117.687416] kfree+0x8b/0x1b0 [ 3117.687460] ttm_bo_man_put_node+0x61/0x80 [ttm] [ 3117.687476] ttm_bo_cleanup_refs+0x15f/0x250 [ttm] [ 3117.687492] ttm_bo_delayed_delete+0x2f0/0x300 [ttm] [ 3117.687507] ttm_bo_delayed_workqueue+0x17/0x50 [ttm] [ 3117.687528] process_one_work+0x2f9/0x740 [ 3117.687531] worker_thread+0x78/0x6b0 [ 3117.687541] kthread+0x177/0x1c0 [ 3117.687545] ret_from_fork+0x35/0x40 [ 3117.687638] The buggy address belongs to the object at ffff88018f0a6300 which belongs to the cache kmalloc-192 of size 192 [ 3117.688014] The buggy address is located 16 bytes to the right of 192-byte region [ffff88018f0a6300, ffff88018f0a63c0) [ 3117.688382] The buggy address belongs to the page: [ 3117.688554] page:ffffea00063c2980 count:1 mapcount:0 mapping:ffff8801f3403180 index:0x0 [ 3117.688788] flags: 0x17fff8000000100(slab) [ 3117.688944] raw: 017fff8000000100 ffffea00063c2840 0000000e0000000e ffff8801f3403180 [ 3117.689166] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 3117.689386] page dumped because: kasan: bad access detected [ 3117.689653] Memory state around the buggy address: [ 3117.689816] ffff88018f0a6280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3117.690027] ffff88018f0a6300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690239] >ffff88018f0a6380: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.690448] ^ [ 3117.690644] ffff88018f0a6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690868] ffff88018f0a6480: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.691077] ================================================================== [ 3117.691290] Disabling lock debugging due to kernel taint [ 3117.693893] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 3117.694120] PGD 80000001f01bc067 P4D 80000001f01bc067 PUD 1d9638067 PMD 0 [ 3117.694338] Oops: 0002 [#1] SMP KASAN PTI [ 3117.694490] CPU: 1 PID: 1225 Comm: mount Tainted: G B W 4.17.0+ #1 [ 3117.694703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.695073] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.695246] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.695793] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.695969] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.696182] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.696391] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.696604] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.696813] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.697032] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.697280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.702357] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.707235] Call Trace: [ 3117.712077] locate_dirty_segment+0x189/0x190 [ 3117.716891] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.721617] recover_data+0x703/0x2c20 [ 3117.726316] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.730957] ? ksys_mount+0x7e/0xd0 [ 3117.735573] ? policy_nodemask+0x1a/0x90 [ 3117.740198] ? policy_node+0x56/0x70 [ 3117.744829] ? add_fsync_inode+0xf0/0xf0 [ 3117.749487] ? blk_finish_plug+0x44/0x60 [ 3117.754152] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.758831] ? find_inode_fast+0xac/0xc0 [ 3117.763448] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.768046] ? __radix_tree_lookup+0x150/0x150 [ 3117.772603] ? dqget+0x670/0x670 [ 3117.777159] ? pagecache_get_page+0x29/0x410 [ 3117.781648] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.786067] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.790476] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.794790] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.799086] ? rb_insert_color+0x323/0x3d0 [ 3117.803304] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.807563] ? proc_register+0x153/0x1d0 [ 3117.811766] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.815947] ? f2fs_attr_store+0x50/0x50 [ 3117.820087] ? proc_create_single_data+0x52/0x60 [ 3117.824262] f2fs_fill_super+0x1d06/0x2b40 [ 3117.828367] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.832432] ? sget_userns+0x65e/0x690 [ 3117.836500] ? set_blocksize+0x88/0x130 [ 3117.840501] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.844420] mount_bdev+0x1c0/0x200 [ 3117.848275] mount_fs+0x5c/0x190 [ 3117.852053] vfs_kern_mount+0x64/0x190 [ 3117.855810] do_mount+0x2e4/0x1450 [ 3117.859441] ? lockref_put_return+0x130/0x130 [ 3117.862996] ? copy_mount_string+0x20/0x20 [ 3117.866417] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.869719] ? kasan_kmalloc+0xa6/0xd0 [ 3117.872948] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.876121] ? __kmalloc_track_caller+0x196/0x210 [ 3117.879333] ? _copy_from_user+0x61/0x90 [ 3117.882467] ? memdup_user+0x3e/0x60 [ 3117.885604] ksys_mount+0x7e/0xd0 [ 3117.888700] __x64_sys_mount+0x62/0x70 [ 3117.891742] do_syscall_64+0x73/0x160 [ 3117.894692] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.897669] RIP: 0033:0x7f5693f14b9a [ 3117.900563] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.906922] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.910159] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.913469] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.916764] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.920071] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.923393] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.926680] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.949979] CR2: 0000000000000000 [ 3117.954283] ---[ end trace a8e0d899985faf32 ]--- [ 3117.958575] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.962810] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.971789] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.976333] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.980926] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.985497] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.990098] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.994761] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.999392] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3118.004096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3118.008816] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 - Location https://elixir.bootlin.com/linux/v4.18-rc3/source/fs/f2fs/segment.c#L775 if (test_and_clear_bit(segno, dirty_i->dirty_segmap[t])) dirty_i->nr_dirty[t]--; Here dirty_i->dirty_segmap[t] can be NULL which leads to crash in test_and_clear_bit() Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:16:11 +08:00
f2fs: fix to do sanity check with cp_pack_start_sum After fuzzing, cp_pack_start_sum could be corrupted, so current log's summary info should be wrong due to loading incorrect summary block. Then, if segment's type in current log is exceeded NR_CURSEG_TYPE, it can lead accessing invalid dirty_i->dirty_segmap bitmap finally. Add sanity check for cp_pack_start_sum to fix this issue. https://bugzilla.kernel.org/show_bug.cgi?id=200419 - Reproduce - Kernel message (f2fs-dev w/ KASAN) [ 3117.578432] F2FS-fs (loop0): Invalid log blocks per segment (8) [ 3117.578445] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock [ 3117.581364] F2FS-fs (loop0): invalid crc_offset: 30716 [ 3117.583564] WARNING: CPU: 1 PID: 1225 at fs/f2fs/checkpoint.c:90 __get_meta_page+0x448/0x4b0 [ 3117.583570] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.584014] CPU: 1 PID: 1225 Comm: mount Not tainted 4.17.0+ #1 [ 3117.584017] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.584022] RIP: 0010:__get_meta_page+0x448/0x4b0 [ 3117.584023] Code: 00 49 8d bc 24 84 00 00 00 e8 74 54 da ff 41 83 8c 24 84 00 00 00 08 4c 89 f6 4c 89 ef e8 c0 d9 95 00 48 89 ef e8 18 e3 00 00 <0f> 0b f0 80 4d 48 04 e9 0f fe ff ff 0f 0b 48 89 c7 48 89 04 24 e8 [ 3117.584072] RSP: 0018:ffff88018eb678c0 EFLAGS: 00010286 [ 3117.584082] RAX: ffff88018f0a6a78 RBX: ffffea0007a46600 RCX: ffffffff9314d1b2 [ 3117.584085] RDX: ffffffff00000001 RSI: 0000000000000000 RDI: ffff88018f0a6a98 [ 3117.584087] RBP: ffff88018ebe9980 R08: 0000000000000002 R09: 0000000000000001 [ 3117.584090] R10: 0000000000000001 R11: ffffed00326e4450 R12: ffff880193722200 [ 3117.584092] R13: ffff88018ebe9afc R14: 0000000000000206 R15: ffff88018eb67900 [ 3117.584096] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.584098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.584101] CR2: 00000000016f21b8 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.584112] Call Trace: [ 3117.584121] ? f2fs_set_meta_page_dirty+0x150/0x150 [ 3117.584127] ? f2fs_build_segment_manager+0xbf9/0x3190 [ 3117.584133] ? f2fs_npages_for_summary_flush+0x75/0x120 [ 3117.584145] f2fs_build_segment_manager+0xda8/0x3190 [ 3117.584151] ? f2fs_get_valid_checkpoint+0x298/0xa00 [ 3117.584156] ? f2fs_flush_sit_entries+0x10e0/0x10e0 [ 3117.584184] ? map_id_range_down+0x17c/0x1b0 [ 3117.584188] ? __put_user_ns+0x30/0x30 [ 3117.584206] ? find_next_bit+0x53/0x90 [ 3117.584237] ? cpumask_next+0x16/0x20 [ 3117.584249] f2fs_fill_super+0x1948/0x2b40 [ 3117.584258] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584279] ? sget_userns+0x65e/0x690 [ 3117.584296] ? set_blocksize+0x88/0x130 [ 3117.584302] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.584305] mount_bdev+0x1c0/0x200 [ 3117.584310] mount_fs+0x5c/0x190 [ 3117.584320] vfs_kern_mount+0x64/0x190 [ 3117.584330] do_mount+0x2e4/0x1450 [ 3117.584343] ? lockref_put_return+0x130/0x130 [ 3117.584347] ? copy_mount_string+0x20/0x20 [ 3117.584357] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.584362] ? kasan_kmalloc+0xa6/0xd0 [ 3117.584373] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.584377] ? __kmalloc_track_caller+0x196/0x210 [ 3117.584383] ? _copy_from_user+0x61/0x90 [ 3117.584396] ? memdup_user+0x3e/0x60 [ 3117.584401] ksys_mount+0x7e/0xd0 [ 3117.584405] __x64_sys_mount+0x62/0x70 [ 3117.584427] do_syscall_64+0x73/0x160 [ 3117.584440] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.584455] RIP: 0033:0x7f5693f14b9a [ 3117.584456] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.584505] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.584510] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.584512] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.584514] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.584516] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.584519] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.584523] ---[ end trace a8e0d899985faf31 ]--- [ 3117.685663] F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix. [ 3117.685673] F2FS-fs (loop0): recover_data: ino = 2 (i_size: recover) recovered = 1, err = 0 [ 3117.685707] ================================================================== [ 3117.685955] BUG: KASAN: slab-out-of-bounds in __remove_dirty_segment+0xdd/0x1e0 [ 3117.686175] Read of size 8 at addr ffff88018f0a63d0 by task mount/1225 [ 3117.686477] CPU: 0 PID: 1225 Comm: mount Tainted: G W 4.17.0+ #1 [ 3117.686481] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.686483] Call Trace: [ 3117.686494] dump_stack+0x71/0xab [ 3117.686512] print_address_description+0x6b/0x290 [ 3117.686517] kasan_report+0x28e/0x390 [ 3117.686522] ? __remove_dirty_segment+0xdd/0x1e0 [ 3117.686527] __remove_dirty_segment+0xdd/0x1e0 [ 3117.686532] locate_dirty_segment+0x189/0x190 [ 3117.686538] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.686543] recover_data+0x703/0x2c20 [ 3117.686547] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.686553] ? ksys_mount+0x7e/0xd0 [ 3117.686564] ? policy_nodemask+0x1a/0x90 [ 3117.686567] ? policy_node+0x56/0x70 [ 3117.686571] ? add_fsync_inode+0xf0/0xf0 [ 3117.686592] ? blk_finish_plug+0x44/0x60 [ 3117.686597] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.686602] ? find_inode_fast+0xac/0xc0 [ 3117.686606] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.686618] ? __radix_tree_lookup+0x150/0x150 [ 3117.686633] ? dqget+0x670/0x670 [ 3117.686648] ? pagecache_get_page+0x29/0x410 [ 3117.686656] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.686660] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.686664] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.686670] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.686674] ? rb_insert_color+0x323/0x3d0 [ 3117.686678] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.686683] ? proc_register+0x153/0x1d0 [ 3117.686686] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.686695] ? f2fs_attr_store+0x50/0x50 [ 3117.686700] ? proc_create_single_data+0x52/0x60 [ 3117.686707] f2fs_fill_super+0x1d06/0x2b40 [ 3117.686728] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686735] ? sget_userns+0x65e/0x690 [ 3117.686740] ? set_blocksize+0x88/0x130 [ 3117.686745] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.686748] mount_bdev+0x1c0/0x200 [ 3117.686753] mount_fs+0x5c/0x190 [ 3117.686758] vfs_kern_mount+0x64/0x190 [ 3117.686762] do_mount+0x2e4/0x1450 [ 3117.686769] ? lockref_put_return+0x130/0x130 [ 3117.686773] ? copy_mount_string+0x20/0x20 [ 3117.686777] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.686780] ? kasan_kmalloc+0xa6/0xd0 [ 3117.686786] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.686790] ? __kmalloc_track_caller+0x196/0x210 [ 3117.686795] ? _copy_from_user+0x61/0x90 [ 3117.686801] ? memdup_user+0x3e/0x60 [ 3117.686804] ksys_mount+0x7e/0xd0 [ 3117.686809] __x64_sys_mount+0x62/0x70 [ 3117.686816] do_syscall_64+0x73/0x160 [ 3117.686824] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.686829] RIP: 0033:0x7f5693f14b9a [ 3117.686830] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.686887] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.686892] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.686894] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.686896] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.686899] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.686901] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.687005] Allocated by task 1225: [ 3117.687152] kasan_kmalloc+0xa6/0xd0 [ 3117.687157] kmem_cache_alloc_trace+0xfd/0x200 [ 3117.687161] f2fs_build_segment_manager+0x2d09/0x3190 [ 3117.687165] f2fs_fill_super+0x1948/0x2b40 [ 3117.687168] mount_bdev+0x1c0/0x200 [ 3117.687171] mount_fs+0x5c/0x190 [ 3117.687174] vfs_kern_mount+0x64/0x190 [ 3117.687177] do_mount+0x2e4/0x1450 [ 3117.687180] ksys_mount+0x7e/0xd0 [ 3117.687182] __x64_sys_mount+0x62/0x70 [ 3117.687186] do_syscall_64+0x73/0x160 [ 3117.687190] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.687285] Freed by task 19: [ 3117.687412] __kasan_slab_free+0x137/0x190 [ 3117.687416] kfree+0x8b/0x1b0 [ 3117.687460] ttm_bo_man_put_node+0x61/0x80 [ttm] [ 3117.687476] ttm_bo_cleanup_refs+0x15f/0x250 [ttm] [ 3117.687492] ttm_bo_delayed_delete+0x2f0/0x300 [ttm] [ 3117.687507] ttm_bo_delayed_workqueue+0x17/0x50 [ttm] [ 3117.687528] process_one_work+0x2f9/0x740 [ 3117.687531] worker_thread+0x78/0x6b0 [ 3117.687541] kthread+0x177/0x1c0 [ 3117.687545] ret_from_fork+0x35/0x40 [ 3117.687638] The buggy address belongs to the object at ffff88018f0a6300 which belongs to the cache kmalloc-192 of size 192 [ 3117.688014] The buggy address is located 16 bytes to the right of 192-byte region [ffff88018f0a6300, ffff88018f0a63c0) [ 3117.688382] The buggy address belongs to the page: [ 3117.688554] page:ffffea00063c2980 count:1 mapcount:0 mapping:ffff8801f3403180 index:0x0 [ 3117.688788] flags: 0x17fff8000000100(slab) [ 3117.688944] raw: 017fff8000000100 ffffea00063c2840 0000000e0000000e ffff8801f3403180 [ 3117.689166] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 3117.689386] page dumped because: kasan: bad access detected [ 3117.689653] Memory state around the buggy address: [ 3117.689816] ffff88018f0a6280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 3117.690027] ffff88018f0a6300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690239] >ffff88018f0a6380: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.690448] ^ [ 3117.690644] ffff88018f0a6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3117.690868] ffff88018f0a6480: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3117.691077] ================================================================== [ 3117.691290] Disabling lock debugging due to kernel taint [ 3117.693893] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 3117.694120] PGD 80000001f01bc067 P4D 80000001f01bc067 PUD 1d9638067 PMD 0 [ 3117.694338] Oops: 0002 [#1] SMP KASAN PTI [ 3117.694490] CPU: 1 PID: 1225 Comm: mount Tainted: G B W 4.17.0+ #1 [ 3117.694703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3117.695073] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.695246] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.695793] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.695969] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.696182] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.696391] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.696604] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.696813] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.697032] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3117.697280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3117.702357] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 [ 3117.707235] Call Trace: [ 3117.712077] locate_dirty_segment+0x189/0x190 [ 3117.716891] f2fs_allocate_new_segments+0xa9/0xe0 [ 3117.721617] recover_data+0x703/0x2c20 [ 3117.726316] ? f2fs_recover_fsync_data+0x48f/0xd50 [ 3117.730957] ? ksys_mount+0x7e/0xd0 [ 3117.735573] ? policy_nodemask+0x1a/0x90 [ 3117.740198] ? policy_node+0x56/0x70 [ 3117.744829] ? add_fsync_inode+0xf0/0xf0 [ 3117.749487] ? blk_finish_plug+0x44/0x60 [ 3117.754152] ? f2fs_ra_meta_pages+0x38b/0x5e0 [ 3117.758831] ? find_inode_fast+0xac/0xc0 [ 3117.763448] ? f2fs_is_valid_blkaddr+0x320/0x320 [ 3117.768046] ? __radix_tree_lookup+0x150/0x150 [ 3117.772603] ? dqget+0x670/0x670 [ 3117.777159] ? pagecache_get_page+0x29/0x410 [ 3117.781648] ? kmem_cache_alloc+0x176/0x1e0 [ 3117.786067] ? f2fs_is_valid_blkaddr+0x11d/0x320 [ 3117.790476] f2fs_recover_fsync_data+0xc23/0xd50 [ 3117.794790] ? f2fs_space_for_roll_forward+0x60/0x60 [ 3117.799086] ? rb_insert_color+0x323/0x3d0 [ 3117.803304] ? f2fs_recover_orphan_inodes+0xa5/0x700 [ 3117.807563] ? proc_register+0x153/0x1d0 [ 3117.811766] ? f2fs_remove_orphan_inode+0x10/0x10 [ 3117.815947] ? f2fs_attr_store+0x50/0x50 [ 3117.820087] ? proc_create_single_data+0x52/0x60 [ 3117.824262] f2fs_fill_super+0x1d06/0x2b40 [ 3117.828367] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.832432] ? sget_userns+0x65e/0x690 [ 3117.836500] ? set_blocksize+0x88/0x130 [ 3117.840501] ? f2fs_commit_super+0x1a0/0x1a0 [ 3117.844420] mount_bdev+0x1c0/0x200 [ 3117.848275] mount_fs+0x5c/0x190 [ 3117.852053] vfs_kern_mount+0x64/0x190 [ 3117.855810] do_mount+0x2e4/0x1450 [ 3117.859441] ? lockref_put_return+0x130/0x130 [ 3117.862996] ? copy_mount_string+0x20/0x20 [ 3117.866417] ? kasan_unpoison_shadow+0x31/0x40 [ 3117.869719] ? kasan_kmalloc+0xa6/0xd0 [ 3117.872948] ? memcg_kmem_put_cache+0x16/0x90 [ 3117.876121] ? __kmalloc_track_caller+0x196/0x210 [ 3117.879333] ? _copy_from_user+0x61/0x90 [ 3117.882467] ? memdup_user+0x3e/0x60 [ 3117.885604] ksys_mount+0x7e/0xd0 [ 3117.888700] __x64_sys_mount+0x62/0x70 [ 3117.891742] do_syscall_64+0x73/0x160 [ 3117.894692] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3117.897669] RIP: 0033:0x7f5693f14b9a [ 3117.900563] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 3117.906922] RSP: 002b:00007fff27346488 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 3117.910159] RAX: ffffffffffffffda RBX: 00000000016e2030 RCX: 00007f5693f14b9a [ 3117.913469] RDX: 00000000016e2210 RSI: 00000000016e3f30 RDI: 00000000016ee040 [ 3117.916764] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 3117.920071] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 00000000016ee040 [ 3117.923393] R13: 00000000016e2210 R14: 0000000000000000 R15: 0000000000000003 [ 3117.926680] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer joydev input_leds serio_raw snd soundcore mac_hid i2c_piix4 ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi btrfs zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear 8139too qxl ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel psmouse aes_x86_64 8139cp crypto_simd cryptd mii glue_helper pata_acpi floppy [ 3117.949979] CR2: 0000000000000000 [ 3117.954283] ---[ end trace a8e0d899985faf32 ]--- [ 3117.958575] RIP: 0010:__remove_dirty_segment+0xe2/0x1e0 [ 3117.962810] Code: c4 48 89 c7 e8 cf bb d7 ff 45 0f b6 24 24 41 83 e4 3f 44 88 64 24 07 41 83 e4 3f 4a 8d 7c e3 08 e8 b3 bc d7 ff 4a 8b 4c e3 08 <f0> 4c 0f b3 29 0f 82 94 00 00 00 48 8d bd 20 04 00 00 e8 97 bb d7 [ 3117.971789] RSP: 0018:ffff88018eb67638 EFLAGS: 00010292 [ 3117.976333] RAX: 0000000000000000 RBX: ffff88018f0a6300 RCX: 0000000000000000 [ 3117.980926] RDX: 0000000000000000 RSI: 0000000000000297 RDI: 0000000000000297 [ 3117.985497] RBP: ffff88018ebe9980 R08: ffffed003e743ebb R09: ffffed003e743ebb [ 3117.990098] R10: 0000000000000001 R11: ffffed003e743eba R12: 0000000000000019 [ 3117.994761] R13: 0000000000000014 R14: 0000000000000320 R15: ffff88018ebe99e0 [ 3117.999392] FS: 00007f5694636840(0000) GS:ffff8801f3b00000(0000) knlGS:0000000000000000 [ 3118.004096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3118.008816] CR2: 00007fe89bb1a000 CR3: 0000000191c22000 CR4: 00000000000006e0 - Location https://elixir.bootlin.com/linux/v4.18-rc3/source/fs/f2fs/segment.c#L775 if (test_and_clear_bit(segno, dirty_i->dirty_segmap[t])) dirty_i->nr_dirty[t]--; Here dirty_i->dirty_segmap[t] can be NULL which leads to crash in test_and_clear_bit() Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 19:16:11 +08:00
f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize during mount, in order to avoid accessing across cache boundary with this abnormal bitmap size. - Overview buffer overrun in build_sit_info() when mounting a crafted f2fs image - Reproduce - Kernel message [ 548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.584979] ================================================================== [ 548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50 [ 548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295 [ 548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.589438] Call Trace: [ 548.589474] dump_stack+0x7b/0xb5 [ 548.589487] print_address_description+0x70/0x290 [ 548.589492] kasan_report+0x291/0x390 [ 548.589496] ? kmemdup+0x36/0x50 [ 548.589509] check_memory_region+0x139/0x190 [ 548.589514] memcpy+0x23/0x50 [ 548.589518] kmemdup+0x36/0x50 [ 548.589545] f2fs_build_segment_manager+0x8fa/0x3410 [ 548.589551] ? __asan_loadN+0xf/0x20 [ 548.589560] ? f2fs_sanity_check_ckpt+0x1be/0x240 [ 548.589566] ? f2fs_flush_sit_entries+0x10c0/0x10c0 [ 548.589587] ? __put_user_ns+0x40/0x40 [ 548.589604] ? find_next_bit+0x57/0x90 [ 548.589610] f2fs_fill_super+0x194b/0x2b40 [ 548.589617] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589637] ? set_blocksize+0x90/0x140 [ 548.589651] mount_bdev+0x1c5/0x210 [ 548.589655] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589667] f2fs_mount+0x15/0x20 [ 548.589672] mount_fs+0x60/0x1a0 [ 548.589683] ? alloc_vfsmnt+0x309/0x360 [ 548.589688] vfs_kern_mount+0x6b/0x1a0 [ 548.589699] do_mount+0x34a/0x18c0 [ 548.589710] ? lockref_put_or_lock+0xcf/0x160 [ 548.589716] ? copy_mount_string+0x20/0x20 [ 548.589728] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.589734] ? kasan_check_write+0x14/0x20 [ 548.589740] ? _copy_from_user+0x6a/0x90 [ 548.589744] ? memdup_user+0x42/0x60 [ 548.589750] ksys_mount+0x83/0xd0 [ 548.589755] __x64_sys_mount+0x67/0x80 [ 548.589781] do_syscall_64+0x78/0x170 [ 548.589797] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.589820] RIP: 0033:0x7f76fc331b9a [ 548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.590242] The buggy address belongs to the page: [ 548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 548.592886] flags: 0x2ffff0000000000() [ 548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 548.603713] page dumped because: kasan: bad access detected [ 548.605203] Memory state around the buggy address: [ 548.606198] ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.607676] ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.610629] ^ [ 548.612088] ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.613674] ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.615141] ================================================================== [ 548.616613] Disabling lock debugging due to kernel taint [ 548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420 [ 548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G B 4.18.0-rc1+ #4 [ 548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420 [ 548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b [ 548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246 [ 548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7 [ 548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000 [ 548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5 [ 548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040 [ 548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938 [ 548.623299] FS: 00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 548.623302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0 [ 548.623317] Call Trace: [ 548.623325] ? kasan_check_read+0x11/0x20 [ 548.623330] ? __zone_watermark_ok+0x92/0x240 [ 548.623336] ? get_page_from_freelist+0x1c3/0x1d90 [ 548.623347] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 548.623353] ? warn_alloc+0x250/0x250 [ 548.623358] ? save_stack+0x46/0xd0 [ 548.623361] ? kasan_kmalloc+0xad/0xe0 [ 548.623366] ? __isolate_free_page+0x2a0/0x2a0 [ 548.623370] ? mount_fs+0x60/0x1a0 [ 548.623374] ? vfs_kern_mount+0x6b/0x1a0 [ 548.623378] ? do_mount+0x34a/0x18c0 [ 548.623383] ? ksys_mount+0x83/0xd0 [ 548.623387] ? __x64_sys_mount+0x67/0x80 [ 548.623391] ? do_syscall_64+0x78/0x170 [ 548.623396] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623401] __alloc_pages_nodemask+0x3c5/0x400 [ 548.623407] ? __alloc_pages_slowpath+0x1420/0x1420 [ 548.623412] ? __mutex_lock_slowpath+0x20/0x20 [ 548.623417] ? kvmalloc_node+0x31/0x80 [ 548.623424] alloc_pages_current+0x75/0x110 [ 548.623436] kmalloc_order+0x24/0x60 [ 548.623442] kmalloc_order_trace+0x24/0xb0 [ 548.623448] __kmalloc_track_caller+0x207/0x220 [ 548.623455] ? f2fs_build_node_manager+0x399/0xbb0 [ 548.623460] kmemdup+0x20/0x50 [ 548.623465] f2fs_build_node_manager+0x399/0xbb0 [ 548.623470] f2fs_fill_super+0x195e/0x2b40 [ 548.623477] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623481] ? set_blocksize+0x90/0x140 [ 548.623486] mount_bdev+0x1c5/0x210 [ 548.623489] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623495] f2fs_mount+0x15/0x20 [ 548.623498] mount_fs+0x60/0x1a0 [ 548.623503] ? alloc_vfsmnt+0x309/0x360 [ 548.623508] vfs_kern_mount+0x6b/0x1a0 [ 548.623513] do_mount+0x34a/0x18c0 [ 548.623518] ? lockref_put_or_lock+0xcf/0x160 [ 548.623523] ? copy_mount_string+0x20/0x20 [ 548.623528] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.623533] ? kasan_check_write+0x14/0x20 [ 548.623537] ? _copy_from_user+0x6a/0x90 [ 548.623542] ? memdup_user+0x42/0x60 [ 548.623547] ksys_mount+0x83/0xd0 [ 548.623552] __x64_sys_mount+0x67/0x80 [ 548.623557] do_syscall_64+0x78/0x170 [ 548.623562] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623566] RIP: 0033:0x7f76fc331b9a [ 548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.623650] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager [ 548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578 sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL); Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size. Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-23 11:25:19 +08:00
f2fs: fix to check layout on last valid checkpoint park As Ju Hyung reported: " I was semi-forced today to use the new kernel and test f2fs. My Ubuntu initramfs got a bit wonky and I had to boot into live CD and fix some stuffs. The live CD was using 4.15 kernel, and just mounting the f2fs partition there corrupted f2fs and my 4.19(with 5.1-rc1-4.19 f2fs-stable merged) refused to mount with "SIT is corrupted node" message. I used the latest f2fs-tools sent by Chao including "fsck.f2fs: fix to repair cp_loads blocks at correct position" It spit out 140M worth of output, but at least I didn't have to run it twice. Everything returned "Ok" in the 2nd run. The new log is at http://arter97.com/f2fs/final After fixing the image, I used my 4.19 kernel with 5.2-rc1-4.19 f2fs-stable merged and it mounted. But, I got this: [ 1.047791] F2FS-fs (nvme0n1p3): layout of large_nat_bitmap is deprecated, run fsck to repair, chksum_offset: 4092 [ 1.081307] F2FS-fs (nvme0n1p3): Found nat_bits in checkpoint [ 1.161520] F2FS-fs (nvme0n1p3): recover fsync data on readonly fs [ 1.162418] F2FS-fs (nvme0n1p3): Mounted with checkpoint version = 761c7e00 But after doing a reboot, the message is gone: [ 1.098423] F2FS-fs (nvme0n1p3): Found nat_bits in checkpoint [ 1.177771] F2FS-fs (nvme0n1p3): recover fsync data on readonly fs [ 1.178365] F2FS-fs (nvme0n1p3): Mounted with checkpoint version = 761c7eda I'm not exactly sure why the kernel detected that I'm still using the old layout on the first boot. Maybe fsck didn't fix it properly, or the check from the kernel is improper. " Although we have rebuild the old deprecated checkpoint with new layout during repair, we only repair last checkpoint park, the other old one is remained. Once the image was mounted, we will 1) sanity check layout and 2) decide which checkpoint park to use according to cp_ver. So that we will print reported message unnecessarily at step 1), to avoid it, we simply move layout check into f2fs_sanity_check_ckpt() after step 2). Reported-by: Park Ju Hyung <qkrwngud825@gmail.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-05-20 10:09:22 +08:00
f2fs: fix to check layout on last valid checkpoint park As Ju Hyung reported: " I was semi-forced today to use the new kernel and test f2fs. My Ubuntu initramfs got a bit wonky and I had to boot into live CD and fix some stuffs. The live CD was using 4.15 kernel, and just mounting the f2fs partition there corrupted f2fs and my 4.19(with 5.1-rc1-4.19 f2fs-stable merged) refused to mount with "SIT is corrupted node" message. I used the latest f2fs-tools sent by Chao including "fsck.f2fs: fix to repair cp_loads blocks at correct position" It spit out 140M worth of output, but at least I didn't have to run it twice. Everything returned "Ok" in the 2nd run. The new log is at http://arter97.com/f2fs/final After fixing the image, I used my 4.19 kernel with 5.2-rc1-4.19 f2fs-stable merged and it mounted. But, I got this: [ 1.047791] F2FS-fs (nvme0n1p3): layout of large_nat_bitmap is deprecated, run fsck to repair, chksum_offset: 4092 [ 1.081307] F2FS-fs (nvme0n1p3): Found nat_bits in checkpoint [ 1.161520] F2FS-fs (nvme0n1p3): recover fsync data on readonly fs [ 1.162418] F2FS-fs (nvme0n1p3): Mounted with checkpoint version = 761c7e00 But after doing a reboot, the message is gone: [ 1.098423] F2FS-fs (nvme0n1p3): Found nat_bits in checkpoint [ 1.177771] F2FS-fs (nvme0n1p3): recover fsync data on readonly fs [ 1.178365] F2FS-fs (nvme0n1p3): Mounted with checkpoint version = 761c7eda I'm not exactly sure why the kernel detected that I'm still using the old layout on the first boot. Maybe fsck didn't fix it properly, or the check from the kernel is improper. " Although we have rebuild the old deprecated checkpoint with new layout during repair, we only repair last checkpoint park, the other old one is remained. Once the image was mounted, we will 1) sanity check layout and 2) decide which checkpoint park to use according to cp_ver. So that we will print reported message unnecessarily at step 1), to avoid it, we simply move layout check into f2fs_sanity_check_ckpt() after step 2). Reported-by: Park Ju Hyung <qkrwngud825@gmail.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-05-20 10:09:22 +08:00
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 18:26:56 +05:30
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 18:26:56 +05:30
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 18:26:56 +05:30
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 18:26:56 +05:30
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 18:26:56 +05:30
f2fs: support zone capacity less than zone size NVMe Zoned Namespace devices can have zone-capacity less than zone-size. Zone-capacity indicates the maximum number of sectors that are usable in a zone beginning from the first sector of the zone. This makes the sectors sectors after the zone-capacity till zone-size to be unusable. This patch set tracks zone-size and zone-capacity in zoned devices and calculate the usable blocks per segment and usable segments per section. If zone-capacity is less than zone-size mark only those segments which start before zone-capacity as free segments. All segments at and beyond zone-capacity are treated as permanently used segments. In cases where zone-capacity does not align with segment size the last segment will start before zone-capacity and end beyond the zone-capacity of the zone. For such spanning segments only sectors within the zone-capacity are used. During writes and GC manage the usable segments in a section and usable blocks per segment. Segments which are beyond zone-capacity are never allocated, and do not need to be garbage collected, only the segments which are before zone-capacity needs to garbage collected. For spanning segments based on the number of usable blocks in that segment, write to blocks only up to zone-capacity. Zone-capacity is device specific and cannot be configured by the user. Since NVMe ZNS device zones are sequentially write only, a block device with conventional zones or any normal block device is needed along with the ZNS device for the metadata operations of F2fs. A typical nvme-cli output of a zoned device shows zone start and capacity and write pointer as below: SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones are in EMPTY state. For each zone, only zone start + 49MB is usable area, any lba/sector after 49MB cannot be read or written to, the drive will fail any attempts to read/write. So, the second zone starts at 64MB and is usable till 113MB (64 + 49) and the range between 113 and 128MB is again unusable. The next zone starts at 128MB, and so on. Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-16 18:26:56 +05:30
f2fs: fix scheduling while atomic in decompression path [ 16.945668][ C0] Call trace: [ 16.945678][ C0] dump_backtrace+0x110/0x204 [ 16.945706][ C0] dump_stack_lvl+0x84/0xbc [ 16.945735][ C0] __schedule_bug+0xb8/0x1ac [ 16.945756][ C0] __schedule+0x724/0xbdc [ 16.945778][ C0] schedule+0x154/0x258 [ 16.945793][ C0] bit_wait_io+0x48/0xa4 [ 16.945808][ C0] out_of_line_wait_on_bit+0x114/0x198 [ 16.945824][ C0] __sync_dirty_buffer+0x1f8/0x2e8 [ 16.945853][ C0] __f2fs_commit_super+0x140/0x1f4 [ 16.945881][ C0] f2fs_commit_super+0x110/0x28c [ 16.945898][ C0] f2fs_handle_error+0x1f4/0x2f4 [ 16.945917][ C0] f2fs_decompress_cluster+0xc4/0x450 [ 16.945942][ C0] f2fs_end_read_compressed_page+0xc0/0xfc [ 16.945959][ C0] f2fs_handle_step_decompress+0x118/0x1cc [ 16.945978][ C0] f2fs_read_end_io+0x168/0x2b0 [ 16.945993][ C0] bio_endio+0x25c/0x2c8 [ 16.946015][ C0] dm_io_dec_pending+0x3e8/0x57c [ 16.946052][ C0] clone_endio+0x134/0x254 [ 16.946069][ C0] bio_endio+0x25c/0x2c8 [ 16.946084][ C0] blk_update_request+0x1d4/0x478 [ 16.946103][ C0] scsi_end_request+0x38/0x4cc [ 16.946129][ C0] scsi_io_completion+0x94/0x184 [ 16.946147][ C0] scsi_finish_command+0xe8/0x154 [ 16.946164][ C0] scsi_complete+0x90/0x1d8 [ 16.946181][ C0] blk_done_softirq+0xa4/0x11c [ 16.946198][ C0] _stext+0x184/0x614 [ 16.946214][ C0] __irq_exit_rcu+0x78/0x144 [ 16.946234][ C0] handle_domain_irq+0xd4/0x154 [ 16.946260][ C0] gic_handle_irq.33881+0x5c/0x27c [ 16.946281][ C0] call_on_irq_stack+0x40/0x70 [ 16.946298][ C0] do_interrupt_handler+0x48/0xa4 [ 16.946313][ C0] el1_interrupt+0x38/0x68 [ 16.946346][ C0] el1h_64_irq_handler+0x20/0x30 [ 16.946362][ C0] el1h_64_irq+0x78/0x7c [ 16.946377][ C0] finish_task_switch+0xc8/0x3d8 [ 16.946394][ C0] __schedule+0x600/0xbdc [ 16.946408][ C0] preempt_schedule_common+0x34/0x5c [ 16.946423][ C0] preempt_schedule+0x44/0x48 [ 16.946438][ C0] process_one_work+0x30c/0x550 [ 16.946456][ C0] worker_thread+0x414/0x8bc [ 16.946472][ C0] kthread+0x16c/0x1e0 [ 16.946486][ C0] ret_from_fork+0x10/0x20 Fixes: bff139b49d9f ("f2fs: handle decompress only post processing in softirq") Fixes: 95fa90c9e5a7 ("f2fs: support recording errors into superblock") Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-03-23 15:37:54 -07:00
treewide: Use array_size() in f2fs_kzalloc() The f2fs_kzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: f2fs_kzalloc(handle, a * b, gfp) with: f2fs_kzalloc(handle, array_size(a, b), gfp) as well as handling cases of: f2fs_kzalloc(handle, a * b * c, gfp) with: f2fs_kzalloc(handle, array3_size(a, b, c), gfp) This does, however, attempt to ignore constant size factors like: f2fs_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( f2fs_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | f2fs_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( f2fs_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | f2fs_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( f2fs_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ f2fs_kzalloc(HANDLE, - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( f2fs_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( f2fs_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | f2fs_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( f2fs_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | f2fs_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( f2fs_kzalloc(HANDLE, C1 * C2 * C3, ...) | f2fs_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression HANDLE; expression E1, E2; constant C1, C2; @@ ( f2fs_kzalloc(HANDLE, C1 * C2, ...) | f2fs_kzalloc(HANDLE, - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 14:28:23 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: introduce discard_unit mount option As James Z reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213877 [1.] One-line summary of the problem: Mount multiple SMR block devices exceed certain number cause system non-response [2.] Full description of the problem/report: Created some F2FS on SMR devices (mkfs.f2fs -m), then mounted in sequence. Each device is the same Model: HGST HSH721414AL (Size 14TB). Empirically, found that when the amount of SMR device * 1.5Gb > System RAM, the system ran out of memory and hung. No dmesg output. For example, 24 SMR Disk need 24*1.5GB = 36GB. A system with 32G RAM can only mount 21 devices, the 22nd device will be a reproducible cause of system hang. The number of SMR devices with other FS mounted on this system does not interfere with the result above. [3.] Keywords (i.e., modules, networking, kernel): F2FS, SMR, Memory [4.] Kernel information [4.1.] Kernel version (uname -a): Linux 5.13.4-200.fc34.x86_64 #1 SMP Tue Jul 20 20:27:29 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux [4.2.] Kernel .config file: Default Fedora 34 with f2fs-tools-1.14.0-2.fc34.x86_64 [5.] Most recent kernel version which did not have the bug: None [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) None [7.] A small shell script or example program which triggers the problem (if possible) mount /dev/sdX /mnt/0X [8.] Memory consumption With 24 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 46 36 0 0 10 10 Swap: 0 0 0 With 3 * 14T SMR Block device with F2FS free -g total used free shared buff/cache available Mem: 7 5 0 0 1 1 Swap: 7 0 7 The root cause is, there are three bitmaps: - cur_valid_map - ckpt_valid_map - discard_map and each of them will cost ~500MB memory, {cur, ckpt}_valid_map are necessary, but discard_map is optional, since this bitmap will only be useful in mountpoint that small discard is enabled. For a blkzoned device such as SMR or ZNS devices, f2fs will only issue discard for a section(zone) when all blocks of that section are invalid, so, for such device, we don't need small discard functionality at all. This patch introduces a new mountoption "discard_unit=block|segment| section" to support issuing discard with different basic unit which is aligned to block, segment or section, so that user can specify "discard_unit=segment" or "discard_unit=section" to disable small discard functionality. Note that this mount option can not be changed by remount() due to related metadata need to be initialized during mount(). In order to save memory, let's use "discard_unit=section" for blkzoned device by default. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-03 08:15:43 +08:00
f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) Cc: <stable@vger.kernel.org> Reported-by: syzbot+d015b6c2fbb5c383bf08@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/20230522124203.3838360-1-chao@kernel.org Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-05-23 11:58:22 +08:00
fscrypt: support test_dummy_encryption=v2 v1 encryption policies are deprecated in favor of v2, and some new features (e.g. encryption+casefolding) are only being added for v2. Therefore, the "test_dummy_encryption" mount option (which is used for encryption I/O testing with xfstests) needs to support v2 policies. To do this, extend its syntax to be "test_dummy_encryption=v1" or "test_dummy_encryption=v2". The existing "test_dummy_encryption" (no argument) also continues to be accepted, to specify the default setting -- currently v1, but the next patch changes it to v2. To cleanly support both v1 and v2 while also making it easy to support specifying other encryption settings in the future (say, accepting "$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a pointer to the dummy fscrypt_context rather than using mount flags. To avoid concurrency issues, don't allow test_dummy_encryption to be set or changed during a remount. (The former restriction is new, but xfstests doesn't run into it, so no one should notice.) Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4, there are two regressions, both of which are test bugs: ext4/023 and ext4/028 fail because they set an xattr and expect it to be stored inline, but the increase in size of the fscrypt_context from 24 to 40 bytes causes this xattr to be spilled into an external block. Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 16:32:50 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: add fs-verity support Add fs-verity support to f2fs. fs-verity is a filesystem feature that enables transparent integrity protection and authentication of read-only files. It uses a dm-verity like mechanism at the file level: a Merkle tree is used to verify any block in the file in log(filesize) time. It is implemented mainly by helper functions in fs/verity/. See Documentation/filesystems/fsverity.rst for the full documentation. The f2fs support for fs-verity consists of: - Adding a filesystem feature flag and an inode flag for fs-verity. - Implementing the fsverity_operations to support enabling verity on an inode and reading/writing the verity metadata. - Updating ->readpages() to verify data as it's read from verity files and to support reading verity metadata pages. - Updating ->write_begin(), ->write_end(), and ->writepages() to support writing verity metadata pages. - Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl(). Like ext4, f2fs stores the verity metadata (Merkle tree and fsverity_descriptor) past the end of the file, starting at the first 64K boundary beyond i_size. This approach works because (a) verity files are readonly, and (b) pages fully beyond i_size aren't visible to userspace but can be read/written internally by f2fs with only some relatively small changes to f2fs. Extended attributes cannot be used because (a) f2fs limits the total size of an inode's xattr entries to 4096 bytes, which wouldn't be enough for even a single Merkle tree block, and (b) f2fs encryption doesn't encrypt xattrs, yet the verity metadata *must* be encrypted when the file is because it contains hashes of the plaintext data. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-22 09:26:24 -07:00
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: ioctl for removing a range from F2FS This ioctl shrinks a given length (aligned to sections) from end of the main area. Any cursegs and valid blocks will be moved out before invalidating the range. This feature can be used for adjusting partition sizes online. History of the patch: Sahitya Tummala: - Add this ioctl for f2fs_compat_ioctl() as well. - Fix debugfs status to reflect the online resize changes. - Fix potential race between online resize path and allocate new data block path or gc path. Others: - Rename some identifiers. - Add some error handling branches. - Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range. - Implement this interface as ext4's, and change the parameter from shrunk bytes to new block count of F2FS. - During resizing, force to empty sit_journal and forbid adding new entries to it, in order to avoid invalid segno in journal after resize. - Reduce sbi->user_block_count before resize starts. - Commit the updated superblock first, and then update in-memory metadata only when the former succeeds. - Target block count must align to sections. - Write checkpoint before and after committing the new superblock, w/o CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if resize fails after the new superblock is committed. - In free_segment_range(), reduce granularity of gc_mutex. - Add protection on curseg migration. - Add freeze_bdev() and thaw_bdev() for resize fs. - Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation. - Recover super_block and FS metadata when resize fails. - No need to clear CP_FSCK_FLAG in update_ckpt_flags(). - Clean up the sb and fs metadata update functions for resize_fs. Geert Uytterhoeven: - Use div_u64*() for 64-bit divisions Arnd Bergmann: - Not all architectures support get_user() with a 64-bit argument: ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined! Use copy_from_user() here, this will always work. Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-06-05 11:33:25 +08:00
f2fs: support data compression This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-11-01 18:07:14 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: fix to avoid broken of dnode block list f2fs recovery flow is relying on dnode block link list, it means fsynced file recovery depends on previous dnode's persistence in the list, so during fsync() we should wait on all regular inode's dnode writebacked before issuing flush. By this way, we can avoid dnode block list being broken by out-of-order IO submission due to IO scheduler or driver. Sheng Yong helps to do the test with this patch: Target:/data (f2fs, -) 64MB / 32768KB / 4KB / 8 1 / PERSIST / Index Base: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08 2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7 3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48 Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333 After: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 798.81 202.5 41143 40613.87 602.71 838.08 913.83 2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27 3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91 Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333 Patched/Original: 0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189 It looks like atomic write will suffer performance regression. I suspect that the criminal is that we forcing to wait all dnode being in storage cache before we issue PREFLUSH+FUA. BTW, will commit ("f2fs: don't need to wait for node writes for atomic write") cause the problem: we will lose data of last transaction after SPO, even if atomic write return no error: - atomic_open(); - write() P1, P2, P3; - atomic_commit(); - writeback data: P1, P2, P3; - writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing last transaction. - preflush + fua; - power-cut If we don't wait dnode writeback for atomic_write: SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS) 1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85 2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77 3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92 Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18 Patched/Original: 0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294 SQLite's performance recovers. Jaegeuk: "Practically, I don't see db corruption becase of this. We can excuse to lose the last transaction." Finally, we decide to keep original implementation of atomic write interface sematics that we don't wait all dnode writeback before preflush+fua submission. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 23:03:19 +08:00
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 09:00:42 +09:00
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 09:00:42 +09:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: fix to reserve space for IO align feature https://bugzilla.kernel.org/show_bug.cgi?id=204137 With below script, we will hit panic during new segment allocation: DISK=bingo.img MOUNT_DIR=/mnt/f2fs dd if=/dev/zero of=$DISK bs=1M count=105 mkfs.f2fe -a 1 -o 19 -t 1 -z 1 -f -q $DISK mount -t f2fs $DISK $MOUNT_DIR -o "noinline_dentry,flush_merge,noextent_cache,mode=lfs,io_bits=7,fsync_mode=strict" for (( i = 0; i < 4096; i++ )); do name=`head /dev/urandom | tr -dc A-Za-z0-9 | head -c 10` mkdir $MOUNT_DIR/$name done umount $MOUNT_DIR rm $DISK --- Core dump --- Call Trace: allocate_segment_by_default+0x9d/0x100 [f2fs] f2fs_allocate_data_block+0x3c0/0x5c0 [f2fs] do_write_page+0x62/0x110 [f2fs] f2fs_outplace_write_data+0x43/0xc0 [f2fs] f2fs_do_write_data_page+0x386/0x560 [f2fs] __write_data_page+0x706/0x850 [f2fs] f2fs_write_cache_pages+0x267/0x6a0 [f2fs] f2fs_write_data_pages+0x19c/0x2e0 [f2fs] do_writepages+0x1c/0x70 __filemap_fdatawrite_range+0xaa/0xe0 filemap_fdatawrite+0x1f/0x30 f2fs_sync_dirty_inodes+0x74/0x1f0 [f2fs] block_operations+0xdc/0x350 [f2fs] f2fs_write_checkpoint+0x104/0x1150 [f2fs] f2fs_sync_fs+0xa2/0x120 [f2fs] f2fs_balance_fs_bg+0x33c/0x390 [f2fs] f2fs_write_node_pages+0x4c/0x1f0 [f2fs] do_writepages+0x1c/0x70 __writeback_single_inode+0x45/0x320 writeback_sb_inodes+0x273/0x5c0 wb_writeback+0xff/0x2e0 wb_workfn+0xa1/0x370 process_one_work+0x138/0x350 worker_thread+0x4d/0x3d0 kthread+0x109/0x140 ret_from_fork+0x25/0x30 The root cause here is, with IO alignment feature enables, in worst case, we need F2FS_IO_SIZE() free blocks space for single one 4k write due to IO alignment feature will fill dummy pages to make IO being aligned. So we will easily run out of free segments during non-inline directory's data writeback, even in process of foreground GC. In order to fix this issue, I just propose to reserve additional free space for IO alignment feature to handle worst case of free space usage ratio during FGGC. Fixes: 0a595ebaaa6b ("f2fs: support IO alignment for DATA and NODE writes") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-12-11 21:27:36 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: fix to do sanity check with inline flags https://bugzilla.kernel.org/show_bug.cgi?id=200221 - Overview BUG() in clear_inode() when mounting and un-mounting a corrupted f2fs image - Reproduce - Kernel message [ 538.601448] F2FS-fs (loop0): Invalid segment/section count (31, 24 x 1376257) [ 538.601458] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock [ 538.724091] F2FS-fs (loop0): Try to recover 2th superblock, ret: 0 [ 538.724102] F2FS-fs (loop0): Mounted with checkpoint version = 2 [ 540.970834] ------------[ cut here ]------------ [ 540.970838] kernel BUG at fs/inode.c:512! [ 540.971750] invalid opcode: 0000 [#1] SMP KASAN PTI [ 540.972755] CPU: 1 PID: 1305 Comm: umount Not tainted 4.18.0-rc1+ #4 [ 540.974034] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 540.982913] RIP: 0010:clear_inode+0xc0/0xd0 [ 540.983774] Code: 8d a3 30 01 00 00 4c 89 e7 e8 1c ec f8 ff 48 8b 83 30 01 00 00 49 39 c4 75 1a 48 c7 83 a0 00 00 00 60 00 00 00 5b 41 5c 5d c3 <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 1f 40 00 66 66 66 66 90 55 [ 540.987570] RSP: 0018:ffff8801e34a7b70 EFLAGS: 00010002 [ 540.988636] RAX: 0000000000000000 RBX: ffff8801e9b744e8 RCX: ffffffffb840eb3a [ 540.990063] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffff8801e9b746b8 [ 540.991499] RBP: ffff8801e34a7b80 R08: ffffed003d36e8ce R09: ffffed003d36e8ce [ 540.992923] R10: 0000000000000001 R11: ffffed003d36e8cd R12: ffff8801e9b74668 [ 540.994360] R13: ffff8801e9b74760 R14: ffff8801e9b74528 R15: ffff8801e9b74530 [ 540.995786] FS: 00007f4662bdf840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 540.997403] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 540.998571] CR2: 000000000175c568 CR3: 00000001dcfe6000 CR4: 00000000000006e0 [ 541.000015] Call Trace: [ 541.000554] f2fs_evict_inode+0x253/0x630 [ 541.001381] evict+0x16f/0x290 [ 541.002015] iput+0x280/0x300 [ 541.002654] dentry_unlink_inode+0x165/0x1e0 [ 541.003528] __dentry_kill+0x16a/0x260 [ 541.004300] dentry_kill+0x70/0x250 [ 541.005018] dput+0x154/0x1d0 [ 541.005635] do_one_tree+0x34/0x40 [ 541.006354] shrink_dcache_for_umount+0x3f/0xa0 [ 541.007285] generic_shutdown_super+0x43/0x1c0 [ 541.008192] kill_block_super+0x52/0x80 [ 541.008978] kill_f2fs_super+0x62/0x70 [ 541.009750] deactivate_locked_super+0x6f/0xa0 [ 541.010664] deactivate_super+0x5e/0x80 [ 541.011450] cleanup_mnt+0x61/0xa0 [ 541.012151] __cleanup_mnt+0x12/0x20 [ 541.012893] task_work_run+0xc8/0xf0 [ 541.013635] exit_to_usermode_loop+0x125/0x130 [ 541.014555] do_syscall_64+0x138/0x170 [ 541.015340] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 541.016375] RIP: 0033:0x7f46624bf487 [ 541.017104] Code: 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 31 f6 e9 09 00 00 00 66 0f 1f 84 00 00 00 00 00 b8 a6 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 c9 2b 00 f7 d8 64 89 01 48 [ 541.020923] RSP: 002b:00007fff5e12e9a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 541.022452] RAX: 0000000000000000 RBX: 0000000001753030 RCX: 00007f46624bf487 [ 541.023885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000175a1e0 [ 541.025318] RBP: 000000000175a1e0 R08: 0000000000000000 R09: 0000000000000014 [ 541.026755] R10: 00000000000006b2 R11: 0000000000000246 R12: 00007f46629c883c [ 541.028186] R13: 0000000000000000 R14: 0000000001753210 R15: 00007fff5e12ec30 [ 541.029626] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 541.039445] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 541.040392] RIP: 0010:clear_inode+0xc0/0xd0 [ 541.041240] Code: 8d a3 30 01 00 00 4c 89 e7 e8 1c ec f8 ff 48 8b 83 30 01 00 00 49 39 c4 75 1a 48 c7 83 a0 00 00 00 60 00 00 00 5b 41 5c 5d c3 <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 1f 40 00 66 66 66 66 90 55 [ 541.045042] RSP: 0018:ffff8801e34a7b70 EFLAGS: 00010002 [ 541.046099] RAX: 0000000000000000 RBX: ffff8801e9b744e8 RCX: ffffffffb840eb3a [ 541.047537] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffff8801e9b746b8 [ 541.048965] RBP: ffff8801e34a7b80 R08: ffffed003d36e8ce R09: ffffed003d36e8ce [ 541.050402] R10: 0000000000000001 R11: ffffed003d36e8cd R12: ffff8801e9b74668 [ 541.051832] R13: ffff8801e9b74760 R14: ffff8801e9b74528 R15: ffff8801e9b74530 [ 541.053263] FS: 00007f4662bdf840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 541.054891] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 541.056039] CR2: 000000000175c568 CR3: 00000001dcfe6000 CR4: 00000000000006e0 [ 541.058506] ================================================================== [ 541.059991] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0 [ 541.061513] Read of size 8 at addr ffff8801e34a7970 by task umount/1305 [ 541.063302] CPU: 1 PID: 1305 Comm: umount Tainted: G D 4.18.0-rc1+ #4 [ 541.064838] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 541.066778] Call Trace: [ 541.067294] dump_stack+0x7b/0xb5 [ 541.067986] print_address_description+0x70/0x290 [ 541.068941] kasan_report+0x291/0x390 [ 541.069692] ? update_stack_state+0x38c/0x3e0 [ 541.070598] __asan_load8+0x54/0x90 [ 541.071315] update_stack_state+0x38c/0x3e0 [ 541.072172] ? __read_once_size_nocheck.constprop.7+0x20/0x20 [ 541.073340] ? vprintk_func+0x27/0x60 [ 541.074096] ? printk+0xa3/0xd3 [ 541.074762] ? __save_stack_trace+0x5e/0x100 [ 541.075634] unwind_next_frame.part.5+0x18e/0x490 [ 541.076594] ? unwind_dump+0x290/0x290 [ 541.077368] ? __show_regs+0x2c4/0x330 [ 541.078142] __unwind_start+0x106/0x190 [ 541.085422] __save_stack_trace+0x5e/0x100 [ 541.086268] ? __save_stack_trace+0x5e/0x100 [ 541.087161] ? unlink_anon_vmas+0xba/0x2c0 [ 541.087997] save_stack_trace+0x1f/0x30 [ 541.088782] save_stack+0x46/0xd0 [ 541.089475] ? __alloc_pages_slowpath+0x1420/0x1420 [ 541.090477] ? flush_tlb_mm_range+0x15e/0x220 [ 541.091364] ? __dec_node_state+0x24/0xb0 [ 541.092180] ? lock_page_memcg+0x85/0xf0 [ 541.092979] ? unlock_page_memcg+0x16/0x80 [ 541.093812] ? page_remove_rmap+0x198/0x520 [ 541.094674] ? mark_page_accessed+0x133/0x200 [ 541.095559] ? _cond_resched+0x1a/0x50 [ 541.096326] ? unmap_page_range+0xcd4/0xe50 [ 541.097179] ? rb_next+0x58/0x80 [ 541.097845] ? rb_next+0x58/0x80 [ 541.098518] __kasan_slab_free+0x13c/0x1a0 [ 541.099352] ? unlink_anon_vmas+0xba/0x2c0 [ 541.100184] kasan_slab_free+0xe/0x10 [ 541.100934] kmem_cache_free+0x89/0x1e0 [ 541.101724] unlink_anon_vmas+0xba/0x2c0 [ 541.102534] free_pgtables+0x101/0x1b0 [ 541.103299] exit_mmap+0x146/0x2a0 [ 541.103996] ? __ia32_sys_munmap+0x50/0x50 [ 541.104829] ? kasan_check_read+0x11/0x20 [ 541.105649] ? mm_update_next_owner+0x322/0x380 [ 541.106578] mmput+0x8b/0x1d0 [ 541.107191] do_exit+0x43a/0x1390 [ 541.107876] ? mm_update_next_owner+0x380/0x380 [ 541.108791] ? deactivate_super+0x5e/0x80 [ 541.109610] ? cleanup_mnt+0x61/0xa0 [ 541.110351] ? __cleanup_mnt+0x12/0x20 [ 541.111115] ? task_work_run+0xc8/0xf0 [ 541.111879] ? exit_to_usermode_loop+0x125/0x130 [ 541.112817] rewind_stack_do_exit+0x17/0x20 [ 541.113666] RIP: 0033:0x7f46624bf487 [ 541.114404] Code: Bad RIP value. [ 541.115094] RSP: 002b:00007fff5e12e9a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 541.116605] RAX: 0000000000000000 RBX: 0000000001753030 RCX: 00007f46624bf487 [ 541.118034] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000175a1e0 [ 541.119472] RBP: 000000000175a1e0 R08: 0000000000000000 R09: 0000000000000014 [ 541.120890] R10: 00000000000006b2 R11: 0000000000000246 R12: 00007f46629c883c [ 541.122321] R13: 0000000000000000 R14: 0000000001753210 R15: 00007fff5e12ec30 [ 541.124061] The buggy address belongs to the page: [ 541.125042] page:ffffea00078d29c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 541.126651] flags: 0x2ffff0000000000() [ 541.127418] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 541.128963] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 541.130516] page dumped because: kasan: bad access detected [ 541.131954] Memory state around the buggy address: [ 541.132924] ffff8801e34a7800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00 [ 541.134378] ffff8801e34a7880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 541.135814] >ffff8801e34a7900: 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 [ 541.137253] ^ [ 541.138637] ffff8801e34a7980: f1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 541.140075] ffff8801e34a7a00: 00 00 00 00 00 00 00 00 f3 00 00 00 00 00 00 00 [ 541.141509] ================================================================== - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/inode.c#L512 BUG_ON(inode->i_data.nrpages); The root cause is root directory inode is corrupted, it has both inline_data and inline_dentry flag, and its nlink is zero, so in ->evict(), after dropping all page cache, it grabs page #0 for inline data truncation, result in panic in later clear_inode() where we will check inode->i_data.nrpages value. This patch adds inline flags check in sanity_check_inode, in addition, do sanity check with root inode's nlink. Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-06-29 00:19:25 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 21:14:49 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: cleanup dirty pages if recover failed During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-12 18:49:26 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: introduce checkpoint_merge mount option We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-01-19 09:00:42 +09:00
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
f2fs: include charset encoding information in the superblock Add charset encoding to f2fs to support casefolding. It is modeled after the same feature introduced in commit c83ad55eaa91 ("ext4: include charset encoding information in the superblock") Currently this is not compatible with encryption, similar to the current ext4 imlpementation. This will change in the future. >From the ext4 patch: """ The s_encoding field stores a magic number indicating the encoding format and version used globally by file and directory names in the filesystem. The s_encoding_flags defines policies for using the charset encoding, like how to handle invalid sequences. The magic number is mapped to the exact charset table, but the mapping is specific to ext4. Since we don't have any commitment to support old encodings, the only encoding I am supporting right now is utf8-12.1.0. The current implementation prevents the user from enabling encoding and per-directory encryption on the same filesystem at the same time. The incompatibility between these features lies in how we do efficient directory searches when we cannot be sure the encryption of the user provided fname will match the actual hash stored in the disk without decrypting every directory entry, because of normalization cases. My quickest solution is to simply block the concurrent use of these features for now, and enable it later, once we have a better solution. """ Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-23 16:05:28 -07:00
fscrypt: handle test_dummy_encryption in more logical way The behavior of the test_dummy_encryption mount option is that when a new file (or directory or symlink) is created in an unencrypted directory, it's automatically encrypted using a dummy encryption policy. That's it; in particular, the encryption (or lack thereof) of existing files (or directories or symlinks) doesn't change. Unfortunately the implementation of test_dummy_encryption is a bit weird and confusing. When test_dummy_encryption is enabled and a file is being created in an unencrypted directory, we set up an encryption key (->i_crypt_info) for the directory. This isn't actually used to do any encryption, however, since the directory is still unencrypted! Instead, ->i_crypt_info is only used for inheriting the encryption policy. One consequence of this is that the filesystem ends up providing a "dummy context" (policy + nonce) instead of a "dummy policy". In commit ed318a6cc0b6 ("fscrypt: support test_dummy_encryption=v2"), I mistakenly thought this was required. However, actually the nonce only ends up being used to derive a key that is never used. Another consequence of this implementation is that it allows for 'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge case that can be forgotten about. For example, currently FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the dummy encryption policy when the filesystem is mounted with test_dummy_encryption. That seems like the wrong thing to do, since again, the directory itself is not actually encrypted. Therefore, switch to a more logical and maintainable implementation where the dummy encryption policy inheritance is done without setting up keys for unencrypted directories. This involves: - Adding a function fscrypt_policy_to_inherit() which returns the encryption policy to inherit from a directory. This can be a real policy, a dummy policy, or no policy. - Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc. with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc. - Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead of an inode. Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-09-16 21:11:35 -07:00
f2fs: fix to flush all dirty inodes recovered in readonly fs generic/417 reported as blow: ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/inode.c:695! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 21697 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: f2fs_evict_inode+0x556/0x580 [f2fs] Call Trace: ? _raw_spin_unlock+0x2c/0x50 evict+0xa8/0x170 dispose_list+0x34/0x40 evict_inodes+0x118/0x120 generic_shutdown_super+0x41/0x100 ? rcu_read_lock_sched_held+0x97/0xa0 kill_block_super+0x22/0x50 kill_f2fs_super+0x6f/0x80 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: f2fs_evict_inode+0x556/0x580 [f2fs] It can simply reproduced with scripts: Enable quota feature during mkfs. Testcase1: 1. mkfs.f2fs /dev/zram0 2. mount -t f2fs /dev/zram0 /mnt/f2fs 3. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4k" -c "fsync" 4. godown /mnt/f2fs 5. umount /mnt/f2fs 6. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs 7. umount /mnt/f2fs Testcase2: 1. mkfs.f2fs /dev/zram0 2. mount -t f2fs /dev/zram0 /mnt/f2fs 3. touch /mnt/f2fs/file 4. create process[pid = x] do: a) open /mnt/f2fs/file; b) unlink /mnt/f2fs/file 5. godown -f /mnt/f2fs 6. kill process[pid = x] 7. umount /mnt/f2fs 8. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs 9. umount /mnt/f2fs The reason is: during recovery, i_{c,m}time of inode will be updated, then the inode can be set dirty w/o being tracked in sbi->inode_list[DIRTY_META] global list, so later write_checkpoint will not flush such dirty inode into node page. Once umount is called, sync_filesystem() in generic_shutdown_super() will skip syncng dirty inodes due to sb_rdonly check, leaving dirty inodes there. To solve this issue, during umount, add remove SB_RDONLY flag in sb->s_flags, to make sure sync_filesystem() will not be skipped. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-22 17:11:05 +08:00
fs: Limit sys_mount to only request filesystem modules. Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-02 19:39:14 -08:00
2016-01-14 15:18:21 -08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 21:14:49 +08:00
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 21:14:49 +08:00
f2fs: dynamically allocate the f2fs-shrinker Use new APIs to dynamically allocate the f2fs-shrinker. Link: https://lkml.kernel.org/r/20230911094444.68966-8-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Chao Yu <chao@kernel.org> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 17:44:06 +08:00
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
f2fs: dynamically allocate the f2fs-shrinker Use new APIs to dynamically allocate the f2fs-shrinker. Link: https://lkml.kernel.org/r/20230911094444.68966-8-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Chao Yu <chao@kernel.org> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 17:44:06 +08:00
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 21:14:49 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: introduce periodic iostat io latency traces Whenever we notice some sluggish issues on our machines, we are always curious about how well all types of I/O in the f2fs filesystem are handled. But, it's hard to get this kind of real data. First of all, we need to reproduce the issue while turning on the profiling tool like blktrace, but the issue doesn't happen again easily. Second, with the intervention of any tools, the overall timing of the issue will be slightly changed and it sometimes makes us hard to figure it out. So, I added the feature printing out IO latency statistics tracepoint events, which are minimal things to understand filesystem's I/O related behaviors, into F2FS_IOSTAT kernel config. With "iostat_enable" sysfs node on, we can get this statistics info in a periodic way and it would cause the least overhead. [samples] f2fs_ckpt-254:1-507 [003] .... 2842.439683: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [136/1/801], rd_node [136/1/1704], rd_meta [4/2/4], wr_sync_data [164/16/3331], wr_sync_node [152/3/648], wr_sync_meta [160/2/4243], wr_async_data [24/13/15], wr_async_node [0/0/0], wr_async_meta [0/0/0] f2fs_ckpt-254:1-507 [002] .... 2845.450514: f2fs_iostat_latency: dev = (254,11), iotype [peak lat.(ms)/avg lat.(ms)/count], rd_data [60/3/456], rd_node [60/3/1258], rd_meta [0/0/1], wr_sync_data [120/12/2285], wr_sync_node [88/5/428], wr_sync_meta [52/6/2990], wr_async_data [4/1/3], wr_async_node [0/0/0], wr_async_meta [0/0/0] Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-20 15:29:09 -07:00
f2fs: dynamically allocate the f2fs-shrinker Use new APIs to dynamically allocate the f2fs-shrinker. Link: https://lkml.kernel.org/r/20230911094444.68966-8-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Chao Yu <chao@kernel.org> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 17:44:06 +08:00
f2fs: support age threshold based garbage collection There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-08-04 21:14:49 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: clean up symbol namespace As Ted reported: "Hi, I was looking at f2fs's sources recently, and I noticed that there is a very large number of non-static symbols which don't have a f2fs prefix. There's well over a hundred (see attached below). As one example, in fs/f2fs/dir.c there is: unsigned char get_de_type(struct f2fs_dir_entry *de) This function is clearly only useful for f2fs, but it has a generic name. This means that if any other file system tries to have the same symbol name, there will be a symbol conflict and the kernel would not successfully build. It also means that when someone is looking f2fs sources, it's not at all obvious whether a function such as read_data_page(), invalidate_blocks(), is a generic kernel function found in the fs, mm, or block layers, or a f2fs specific function. You might want to fix this at some point. Hopefully Kent's bcachefs isn't similarly using genericly named functions, since that might cause conflicts with f2fs's functions --- but just as this would be a problem that we would rightly insist that Kent fix, this is something that we should have rightly insisted that f2fs should have fixed before it was integrated into the mainline kernel. acquire_orphan_inode add_ino_entry add_orphan_inode allocate_data_block allocate_new_segments alloc_nid alloc_nid_done alloc_nid_failed available_free_memory ...." This patch adds "f2fs_" prefix for all non-static symbols in order to: a) avoid conflict with other kernel generic symbols; b) to indicate the function is f2fs specific one instead of generic one; Reported-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 00:20:41 +08:00
f2fs: remove checkpoint in f2fs_freeze The generic freeze_super() calls sync_filesystems() before f2fs_freeze(). So, basically we don't need to do checkpoint in f2fs_freeze(). But, in xfs/068, it triggers circular locking problem below due to gc_mutex for checkpoint. ====================================================== [ INFO: possible circular locking dependency detected ] 4.9.0-rc1+ #132 Tainted: G OE ------------------------------------------------------- 1. wait for __sb_start_write() by [<ffffffff9845f353>] dump_stack+0x85/0xc2 [<ffffffff980e80bf>] print_circular_bug+0x1cf/0x230 [<ffffffff980eb4d0>] __lock_acquire+0x19e0/0x1bc0 [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff9826bdd0>] __sb_start_write+0x130/0x200 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffffc08c7c3b>] f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff98289991>] iput+0x171/0x2c0 [<ffffffffc08cfccf>] f2fs_sync_inode_meta+0x3f/0xf0 [f2fs] [<ffffffffc08cfe04>] block_operations+0x84/0x110 [f2fs] [<ffffffffc08cff78>] write_checkpoint+0xe8/0xf20 [f2fs] [<ffffffff980e979d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffff9803e9d9>] ? sched_clock+0x9/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c6df5>] f2fs_sync_fs+0x85/0x190 [f2fs] [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4fb0>] sync_fs_one_sb+0x20/0x30 [<ffffffff9826ca3e>] iterate_supers+0xae/0x100 [<ffffffff982a50b5>] sys_sync+0x55/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 2. wait for sbi->gc_mutex by [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffff989063d6>] mutex_lock_nested+0x76/0x3f0 [<ffffffffc08c6de9>] f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c7a6c>] f2fs_freeze+0x1c/0x20 [f2fs] [<ffffffff9826b6ef>] freeze_super+0xcf/0x190 [<ffffffff9827eebc>] do_vfs_ioctl+0x53c/0x6a0 [<ffffffff9827f099>] SyS_ioctl+0x79/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-11-04 14:59:15 -07:00