linux/drivers/net/ntb_netdev.c

496 lines
12 KiB

net: dev: Makes sure netif_rx() can be invoked in any context. Dave suggested a while ago (eleven years by now) "Let's make netif_rx() work in all contexts and get rid of netif_rx_ni()". Eric agreed and pointed out that modern devices should use netif_receive_skb() to avoid the overhead. In the meantime someone added another variant, netif_rx_any_context(), which behaves as suggested. netif_rx() must be invoked with disabled bottom halves to ensure that pending softirqs, which were raised within the function, are handled. netif_rx_ni() can be invoked only from process context (bottom halves must be enabled) because the function handles pending softirqs without checking if bottom halves were disabled or not. netif_rx_any_context() invokes on the former functions by checking in_interrupts(). netif_rx() could be taught to handle both cases (disabled and enabled bottom halves) by simply disabling bottom halves while invoking netif_rx_internal(). The local_bh_enable() invocation will then invoke pending softirqs only if the BH-disable counter drops to zero. Eric is concerned about the overhead of BH-disable+enable especially in regard to the loopback driver. As critical as this driver is, it will receive a shortcut to avoid the additional overhead which is not needed. Add a local_bh_disable() section in netif_rx() to ensure softirqs are handled if needed. Provide __netif_rx() which does not disable BH and has a lockdep assert to ensure that interrupts are disabled. Use this shortcut in the loopback driver and in drivers/net/*.c. Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they can be removed once they are no more users left. Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-12 00:38:38 +01:00
net: use core MTU range checking in core net infra geneve: - Merge __geneve_change_mtu back into geneve_change_mtu, set max_mtu - This one isn't quite as straight-forward as others, could use some closer inspection and testing macvlan: - set min/max_mtu tun: - set min/max_mtu, remove tun_net_change_mtu vxlan: - Merge __vxlan_change_mtu back into vxlan_change_mtu - Set max_mtu to IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function - This one is also not as straight-forward and could use closer inspection and testing from vxlan folks bridge: - set max_mtu of IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function openvswitch: - set min/max_mtu, remove internal_dev_change_mtu - note: max_mtu wasn't checked previously, it's been set to 65535, which is the largest possible size supported sch_teql: - set min/max_mtu (note: max_mtu previously unchecked, used max of 65535) macsec: - min_mtu = 0, max_mtu = 65535 macvlan: - min_mtu = 0, max_mtu = 65535 ntb_netdev: - min_mtu = 0, max_mtu = 65535 veth: - min_mtu = 68, max_mtu = 65535 8021q: - min_mtu = 0, max_mtu = 65535 CC: netdev@vger.kernel.org CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Tom Herbert <tom@herbertland.com> CC: Daniel Borkmann <daniel@iogearbox.net> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Paolo Abeni <pabeni@redhat.com> CC: Jiri Benc <jbenc@redhat.com> CC: WANG Cong <xiyou.wangcong@gmail.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Pravin B Shelar <pshelar@ovn.org> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Patrick McHardy <kaber@trash.net> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Pravin Shelar <pshelar@nicira.com> CC: Maxim Krasnyansky <maxk@qti.qualcomm.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 13:55:20 -04:00