License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2015-11-05 18:49:43 -08:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2008-07-04 09:59:22 -07:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-10-16 02:01:52 -04:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:35 -07:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2006-04-10 22:52:57 -07:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
ksm: rmap_walk to remove_migation_ptes
A side-effect of making ksm pages swappable is that they have to be placed
on the LRUs: which then exposes them to isolate_lru_page() and hence to
page migration.
Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and
rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some
consolidation with existing code is possible, but don't attempt that yet
(try_to_unmap needs to handle nonlinears, but migration pte removal does
not).
rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like
remove_anon_migration_ptes() which it replaces, avoids calling
page_lock_anon_vma(), because that includes a page_mapped() test which
fails when all migration ptes are in place. That was valid when NUMA page
migration was introduced (holding mmap_sem provided the missing guarantee
that anon_vma's slab had not already been destroyed), but I believe not
valid in the memory hotremove case added since.
For now do the same as before, and consider the best way to fix that
unlikely race later on. When fixed, we can probably use rmap_walk() on
hwpoisoned ksm pages too: for now, they remain among hwpoison's various
exceptions (its PageKsm test comes before the page is locked, but its
page_lock_anon_vma fails safely if an anon gets upgraded).
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Izik Eidus <ieidus@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Chris Wright <chrisw@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14 17:59:31 -08:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:38 -07:00
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
|
|
|
|
|
2006-06-23 02:04:02 -07:00
|
|
|
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 18:50:05 -08:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
2008-07-23 21:27:02 -07:00
|
|
|
|
2018-03-17 16:08:03 +01:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
|
|
|
|
mm: introduce idle page tracking
Knowing the portion of memory that is not used by a certain application or
memory cgroup (idle memory) can be useful for partitioning the system
efficiently, e.g. by setting memory cgroup limits appropriately.
Currently, the only means to estimate the amount of idle memory provided
by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the
access bit for all pages mapped to a particular process by writing 1 to
clear_refs, wait for some time, and then count smaps:Referenced. However,
this method has two serious shortcomings:
- it does not count unmapped file pages
- it affects the reclaimer logic
To overcome these drawbacks, this patch introduces two new page flags,
Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap.
A page's Idle flag can only be set from userspace by setting bit in
/sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page,
and it is cleared whenever the page is accessed either through page tables
(it is cleared in page_referenced() in this case) or using the read(2)
system call (mark_page_accessed()). Thus by setting the Idle flag for
pages of a particular workload, which can be found e.g. by reading
/proc/PID/pagemap, waiting for some time to let the workload access its
working set, and then reading the bitmap file, one can estimate the amount
of pages that are not used by the workload.
The Young page flag is used to avoid interference with the memory
reclaimer. A page's Young flag is set whenever the Access bit of a page
table entry pointing to the page is cleared by writing to the bitmap file.
If page_referenced() is called on a Young page, it will add 1 to its
return value, therefore concealing the fact that the Access bit was
cleared.
Note, since there is no room for extra page flags on 32 bit, this feature
uses extended page flags when compiled on 32 bit.
[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: kpageidle requires an MMU]
[akpm@linux-foundation.org: decouple from page-flags rework]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09 15:35:45 -07:00
|
|
|
|
2016-03-15 14:56:15 -07:00
|
|
|
|
2017-02-08 18:51:29 +01:00
|
|
|
|
2017-08-20 13:26:27 -07:00
|
|
|
|
2021-09-02 14:59:09 -07:00
|
|
|
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 14:46:23 -07:00
|
|
|
|
2022-08-18 18:40:41 +05:30
|
|
|
|
mm/migrate: convert do_pages_stat_array() from follow_page() to folio_walk
Let's use folio_walk instead, so we can avoid taking a folio reference
just to read the nid and get rid of another follow_page()/FOLL_DUMP user.
Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented.
The possible return values for follow_page() were confusing, especially
with FOLL_DUMP set. We'll handle it like documented in the man page:
* -EFAULT: This is a zero page or the memory area is not mapped by the
process.
* -ENOENT: The page is not present.
We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to
do, but it likely doesn't really matter (just like for weird devmap,
whereby we fake "not present").
Note that the other errors (-EACCESS, -EBUSY, -EIO, -EINVAL, -ENOMEM) so
far only applied when actually moving pages, not when only querying stats.
We'll effectively drop the "secretmem" check we had in follow_page(), but
that shouldn't really matter here, we're not accessing folio/page content
after all.
Link: https://lkml.kernel.org/r/20240802155524.517137-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 17:55:16 +02:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2010-12-21 17:24:26 -08:00
|
|
|
|
|
|
|
|
|
2012-10-19 14:07:31 +01:00
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2025-05-01 02:10:51 +08:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2025-08-17 23:17:59 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-04 12:25:13 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-08-17 23:17:59 +08:00
|
|
|
|
2025-07-04 12:25:13 +02:00
|
|
|
|
2025-08-17 23:17:59 +08:00
|
|
|
|
|
|
|
|
|
2025-07-04 12:25:13 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-04 12:25:01 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
2025-07-04 12:25:01 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-01-30 13:43:51 -08:00
|
|
|
|
2022-06-07 15:38:48 -04:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-01-30 13:43:51 -08:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-04 12:25:09 +02:00
|
|
|
|
2022-11-04 15:57:26 +01:00
|
|
|
|
|
|
|
|
|
2025-07-04 12:25:09 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
2025-07-04 12:25:10 +02:00
|
|
|
|
2023-01-30 13:43:51 -08:00
|
|
|
|
2022-11-04 15:57:26 +01:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-01-30 13:43:51 -08:00
|
|
|
|
|
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
2025-07-04 12:25:10 +02:00
|
|
|
|
2025-07-04 12:25:15 +02:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
|
|
|
|
|
2025-07-04 12:25:01 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
2025-07-04 12:25:01 +02:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
|
|
|
|
|
2024-03-26 17:10:31 +00:00
|
|
|
|
2025-07-04 12:25:15 +02:00
|
|
|
|
|
|
|
|
|
2023-01-30 13:43:51 -08:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
2023-02-15 18:39:37 +08:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
|
|
|
|
|
2023-01-30 13:43:51 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
2023-02-15 18:39:37 +08:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
|
|
|
|
|
2025-07-04 12:25:02 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
2025-07-04 12:25:02 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-04 12:25:10 +02:00
|
|
|
|
2025-07-04 12:25:15 +02:00
|
|
|
|
2025-07-04 12:25:02 +02:00
|
|
|
|
2025-07-04 12:25:09 +02:00
|
|
|
|
2025-07-04 12:25:15 +02:00
|
|
|
|
2025-07-04 12:25:02 +02:00
|
|
|
|
|
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
|
|
|
|
|
2025-07-04 12:25:03 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2025-07-04 12:25:03 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2025-07-04 12:25:03 +02:00
|
|
|
|
2025-07-04 12:25:10 +02:00
|
|
|
|
2025-07-04 12:25:15 +02:00
|
|
|
|
2025-07-04 12:25:09 +02:00
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2025-07-04 12:25:15 +02:00
|
|
|
|
2025-07-04 12:25:03 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-12-11 16:02:47 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-01-21 15:51:17 -08:00
|
|
|
|
|
|
|
|
|
2025-01-13 14:16:07 +01:00
|
|
|
|
2012-12-11 16:02:47 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-01-30 13:43:52 -08:00
|
|
|
|
|
|
|
|
|
2012-12-11 16:02:47 -08:00
|
|
|
|
2023-01-30 13:43:52 -08:00
|
|
|
|
|
|
|
|
|
2025-01-13 14:16:09 +01:00
|
|
|
|
mm: migrate: make core migration code aware of hugepage
Currently hugepage migration is available only for soft offlining, but
it's also useful for some other users of page migration (clearly because
users of hugepage can enjoy the benefit of mempolicy and memory hotplug.)
So this patchset tries to extend such users to support hugepage migration.
The target of this patchset is to enable hugepage migration for NUMA
related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and
memory hotplug.
This patchset does not add hugepage migration for memory compaction,
because users of memory compaction mainly expect to construct thp by
arranging raw pages, and there's little or no need to compact hugepages.
CMA, another user of page migration, can have benefit from hugepage
migration, but is not enabled to support it for now (just because of lack
of testing and expertise in CMA.)
Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in
x86_64, or hugepages in architectures like ia64) is not enabled for now
(again, because of lack of testing.)
As for how these are achived, I extended the API (migrate_pages()) to
handle hugepage (with patch 1 and 2) and adjusted code of each caller to
check and collect movable hugepages (with patch 3-7). Remaining 2 patches
are kind of miscellaneous ones to avoid unexpected behavior. Patch 8 is
about making sure that we only migrate pmd-based hugepages. And patch 9
is about choosing appropriate zone for hugepage allocation.
My test is mainly functional one, simply kicking hugepage migration via
each entry point and confirm that migration is done correctly. Test code
is available here:
git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git
And I always run libhugetlbfs test when changing hugetlbfs's code. With
this patchset, no regression was found in the test.
This patch (of 9):
Before enabling each user of page migration to support hugepage,
this patch enables the list of pages for migration to link not only
LRU pages, but also hugepages. As a result, putback_movable_pages()
and migrate_pages() can handle both of LRU pages and hugepages.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 14:21:59 -07:00
|
|
|
|
|
|
|
|
|
2023-01-30 13:43:52 -08:00
|
|
|
|
2025-07-04 12:25:12 +02:00
|
|
|
|
2025-07-04 12:25:02 +02:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
2023-01-30 13:43:52 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-27 19:47:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-01-13 14:16:07 +01:00
|
|
|
|
2024-08-27 19:47:27 +08:00
|
|
|
|
2025-07-04 12:25:12 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-27 19:47:27 +08:00
|
|
|
|
|
|
|
|
|
2025-07-04 12:25:12 +02:00
|
|
|
|
|
|
|
|
|
2024-08-27 19:47:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
2025-09-30 16:10:40 +08:00
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: prevent poison consumption when splitting THP
When performing memory error injection on a THP (Transparent Huge Page)
mapped to userspace on an x86 server, the kernel panics with the following
trace. The expected behavior is to terminate the affected process instead
of panicking the kernel, as the x86 Machine Check code can recover from an
in-userspace #MC.
mce: [Hardware Error]: CPU 0: Machine Check Exception: f Bank 3: bd80000000070134
mce: [Hardware Error]: RIP 10:<ffffffff8372f8bc> {memchr_inv+0x4c/0xf0}
mce: [Hardware Error]: TSC afff7bbff88a ADDR 1d301b000 MISC 80 PPIN 1e741e77539027db
mce: [Hardware Error]: PROCESSOR 0:d06d0 TIME 1758093249 SOCKET 0 APIC 0 microcode 80000320
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The root cause of this panic is that handling a memory failure triggered
by an in-userspace #MC necessitates splitting the THP. The splitting
process employs a mechanism, implemented in
try_to_map_unused_to_zeropage(), which reads the pages in the THP to
identify zero-filled pages. However, reading the pages in the THP results
in a second in-kernel #MC, occurring before the initial memory_failure()
completes, ultimately leading to a kernel panic. See the kernel panic
call trace on the two #MCs.
First Machine Check occurs // [1]
memory_failure() // [2]
try_to_split_thp_page()
split_huge_page()
split_huge_page_to_list_to_order()
__folio_split() // [3]
remap_page()
remove_migration_ptes()
remove_migration_pte()
try_to_map_unused_to_zeropage() // [4]
memchr_inv() // [5]
Second Machine Check occurs // [6]
Kernel panic
[1] Triggered by accessing a hardware-poisoned THP in userspace, which is
typically recoverable by terminating the affected process.
[2] Call folio_set_has_hwpoisoned() before try_to_split_thp_page().
[3] Pass the RMP_USE_SHARED_ZEROPAGE remap flag to remap_page().
[4] Try to map the unused THP to zeropage.
[5] Re-access pages in the hw-poisoned THP in the kernel.
[6] Triggered in-kernel, leading to a panic kernel.
In Step[2], memory_failure() sets the poisoned flag on the page in the THP
by TestSetPageHWPoison() before calling try_to_split_thp_page().
As suggested by David Hildenbrand, fix this panic by not accessing to the
poisoned page in the THP during zeropage identification, while continuing
to scan unaffected pages in the THP for possible zeropage mapping. This
prevents a second in-kernel #MC that would cause kernel panic in Step[4].
Thanks to Andrew Zaborowski for his initial work on fixing this issue.
Link: https://lkml.kernel.org/r/20251015064926.1887643-1-qiuxu.zhuo@intel.com
Link: https://lkml.kernel.org/r/20251011075520.320862-1-qiuxu.zhuo@intel.com
Fixes: b1f202060afe ("mm: remap unused subpages to shared zeropage when splitting isolated thp")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reported-by: Farrah Chen <farrah.chen@intel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Acked-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-10-11 15:55:19 +08:00
|
|
|
|
2024-10-23 13:12:36 -04:00
|
|
|
|
mm: prevent poison consumption when splitting THP
When performing memory error injection on a THP (Transparent Huge Page)
mapped to userspace on an x86 server, the kernel panics with the following
trace. The expected behavior is to terminate the affected process instead
of panicking the kernel, as the x86 Machine Check code can recover from an
in-userspace #MC.
mce: [Hardware Error]: CPU 0: Machine Check Exception: f Bank 3: bd80000000070134
mce: [Hardware Error]: RIP 10:<ffffffff8372f8bc> {memchr_inv+0x4c/0xf0}
mce: [Hardware Error]: TSC afff7bbff88a ADDR 1d301b000 MISC 80 PPIN 1e741e77539027db
mce: [Hardware Error]: PROCESSOR 0:d06d0 TIME 1758093249 SOCKET 0 APIC 0 microcode 80000320
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The root cause of this panic is that handling a memory failure triggered
by an in-userspace #MC necessitates splitting the THP. The splitting
process employs a mechanism, implemented in
try_to_map_unused_to_zeropage(), which reads the pages in the THP to
identify zero-filled pages. However, reading the pages in the THP results
in a second in-kernel #MC, occurring before the initial memory_failure()
completes, ultimately leading to a kernel panic. See the kernel panic
call trace on the two #MCs.
First Machine Check occurs // [1]
memory_failure() // [2]
try_to_split_thp_page()
split_huge_page()
split_huge_page_to_list_to_order()
__folio_split() // [3]
remap_page()
remove_migration_ptes()
remove_migration_pte()
try_to_map_unused_to_zeropage() // [4]
memchr_inv() // [5]
Second Machine Check occurs // [6]
Kernel panic
[1] Triggered by accessing a hardware-poisoned THP in userspace, which is
typically recoverable by terminating the affected process.
[2] Call folio_set_has_hwpoisoned() before try_to_split_thp_page().
[3] Pass the RMP_USE_SHARED_ZEROPAGE remap flag to remap_page().
[4] Try to map the unused THP to zeropage.
[5] Re-access pages in the hw-poisoned THP in the kernel.
[6] Triggered in-kernel, leading to a panic kernel.
In Step[2], memory_failure() sets the poisoned flag on the page in the THP
by TestSetPageHWPoison() before calling try_to_split_thp_page().
As suggested by David Hildenbrand, fix this panic by not accessing to the
poisoned page in the THP during zeropage identification, while continuing
to scan unaffected pages in the THP for possible zeropage mapping. This
prevents a second in-kernel #MC that would cause kernel panic in Step[4].
Thanks to Andrew Zaborowski for his initial work on fixing this issue.
Link: https://lkml.kernel.org/r/20251015064926.1887643-1-qiuxu.zhuo@intel.com
Link: https://lkml.kernel.org/r/20251011075520.320862-1-qiuxu.zhuo@intel.com
Fixes: b1f202060afe ("mm: remap unused subpages to shared zeropage when splitting isolated thp")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reported-by: Farrah Chen <farrah.chen@intel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Acked-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-10-11 15:55:19 +08:00
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
|
|
|
|
|
2025-09-30 16:10:40 +08:00
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-09-22 10:14:58 +08:00
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-09-30 16:10:40 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:35 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-29 16:06:53 -05:00
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:35 -07:00
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
|
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:35 -07:00
|
|
|
|
2017-02-24 14:58:16 -08:00
|
|
|
|
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive
Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as
exclusive, and use that information to make GUP pins reliable and stay
consistent with the page mapped into the page table even if the page table
entry gets write-protected.
With that information at hand, we can extend our COW logic to always reuse
anonymous pages that are exclusive. For anonymous pages that might be
shared, the existing logic applies.
As already documented, PG_anon_exclusive is usually only expressive in
combination with a page table entry. Especially PTE vs. PMD-mapped
anonymous pages require more thought, some examples: due to mremap() we
can easily have a single compound page PTE-mapped into multiple page
tables exclusively in a single process -- multiple page table locks apply.
Further, due to MADV_WIPEONFORK we might not necessarily write-protect
all PTEs, and only some subpages might be pinned. Long story short: once
PTE-mapped, we have to track information about exclusivity per sub-page,
but until then, we can just track it for the compound page in the head
page and not having to update a whole bunch of subpages all of the time
for a simple PMD mapping of a THP.
For simplicity, this commit mostly talks about "anonymous pages", while
it's for THP actually "the part of an anonymous folio referenced via a
page table entry".
To not spill PG_anon_exclusive code all over the mm code-base, we let the
anon rmap code to handle all PG_anon_exclusive logic it can easily handle.
If a writable, present page table entry points at an anonymous (sub)page,
that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably
pin (FOLL_PIN) on an anonymous page references via a present page table
entry, it must only pin if PG_anon_exclusive is set for the mapped
(sub)page.
This commit doesn't adjust GUP, so this is only implicitly handled for
FOLL_WRITE, follow-up commits will teach GUP to also respect it for
FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully
reliable.
Whenever an anonymous page is to be shared (fork(), KSM), or when
temporarily unmapping an anonymous page (swap, migration), the relevant
PG_anon_exclusive bit has to be cleared to mark the anonymous page
possibly shared. Clearing will fail if there are GUP pins on the page:
* For fork(), this means having to copy the page and not being able to
share it. fork() protects against concurrent GUP using the PT lock and
the src_mm->write_protect_seq.
* For KSM, this means sharing will fail. For swap this means, unmapping
will fail, For migration this means, migration will fail early. All
three cases protect against concurrent GUP using the PT lock and a
proper clear/invalidate+flush of the relevant page table entry.
This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a
pinned page gets mapped R/O and the successive write fault ends up
replacing the page instead of reusing it. It improves the situation for
O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if
fork() is *not* involved, however swapout and fork() are still
problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP
users will fix the issue for them.
I. Details about basic handling
I.1. Fresh anonymous pages
page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the
given page exclusive via __page_set_anon_rmap(exclusive=1). As that is
the mechanism fresh anonymous pages come into life (besides migration code
where we copy the page->mapping), all fresh anonymous pages will start out
as exclusive.
I.2. COW reuse handling of anonymous pages
When a COW handler stumbles over a (sub)page that's marked exclusive, it
simply reuses it. Otherwise, the handler tries harder under page lock to
detect if the (sub)page is exclusive and can be reused. If exclusive,
page_move_anon_rmap() will mark the given (sub)page exclusive.
Note that hugetlb code does not yet check for PageAnonExclusive(), as it
still uses the old COW logic that is prone to the COW security issue
because hugetlb code cannot really tolerate unnecessary/wrong COW as huge
pages are a scarce resource.
I.3. Migration handling
try_to_migrate() has to try marking an exclusive anonymous page shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. migrate_vma_collect_pmd() and
__split_huge_pmd_locked() are handled similarly.
Writable migration entries implicitly point at shared anonymous pages.
For readable migration entries that information is stored via a new
"readable-exclusive" migration entry, specific to anonymous pages.
When restoring a migration entry in remove_migration_pte(), information
about exlusivity is detected via the migration entry type, and
RMAP_EXCLUSIVE is set accordingly for
page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information.
I.4. Swapout handling
try_to_unmap() has to try marking the mapped page possibly shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. For now, information about exclusivity is lost. In
the future, we might want to remember that information in the swap entry
in some cases, however, it requires more thought, care, and a way to store
that information in swap entries.
I.5. Swapin handling
do_swap_page() will never stumble over exclusive anonymous pages in the
swap cache, as try_to_migrate() prohibits that. do_swap_page() always has
to detect manually if an anonymous page is exclusive and has to set
RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly.
I.6. THP handling
__split_huge_pmd_locked() has to move the information about exclusivity
from the PMD to the PTEs.
a) In case we have a readable-exclusive PMD migration entry, simply
insert readable-exclusive PTE migration entries.
b) In case we have a present PMD entry and we don't want to freeze
("convert to migration entries"), simply forward PG_anon_exclusive to
all sub-pages, no need to temporarily clear the bit.
c) In case we have a present PMD entry and want to freeze, handle it
similar to try_to_migrate(): try marking the page shared first. In
case we fail, we ignore the "freeze" instruction and simply split
ordinarily. try_to_migrate() will properly fail because the THP is
still mapped via PTEs.
When splitting a compound anonymous folio (THP), the information about
exclusivity is implicitly handled via the migration entries: no need to
replicate PG_anon_exclusive manually.
I.7. fork() handling fork() handling is relatively easy, because
PG_anon_exclusive is only expressive for some page table entry types.
a) Present anonymous pages
page_try_dup_anon_rmap() will mark the given subpage shared -- which will
fail if the page is pinned. If it failed, we have to copy (or PTE-map a
PMD to handle it on the PTE level).
Note that device exclusive entries are just a pointer at a PageAnon()
page. fork() will first convert a device exclusive entry to a present
page table and handle it just like present anonymous pages.
b) Device private entry
Device private entries point at PageAnon() pages that cannot be mapped
directly and, therefore, cannot get pinned.
page_try_dup_anon_rmap() will mark the given subpage shared, which cannot
fail because they cannot get pinned.
c) HW poison entries
PG_anon_exclusive will remain untouched and is stale -- the page table
entry is just a placeholder after all.
d) Migration entries
Writable and readable-exclusive entries are converted to readable entries:
possibly shared.
I.8. mprotect() handling
mprotect() only has to properly handle the new readable-exclusive
migration entry:
When write-protecting a migration entry that points at an anonymous page,
remember the information about exclusivity via the "readable-exclusive"
migration entry type.
II. Migration and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a migration entry, we have to mark the page possibly
shared and synchronize against GUP-fast by a proper clear/invalidate+flush
to make the following scenario impossible:
1. try_to_migrate() places a migration entry after checking for GUP pins
and marks the page possibly shared.
2. GUP-fast pins the page due to lack of synchronization
3. fork() converts the "writable/readable-exclusive" migration entry into a
readable migration entry
4. Migration fails due to the GUP pin (failing to freeze the refcount)
5. Migration entries are restored. PG_anon_exclusive is lost
-> We have a pinned page that is not marked exclusive anymore.
Note that we move information about exclusivity from the page to the
migration entry as it otherwise highly overcomplicates fork() and
PTE-mapping a THP.
III. Swapout and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a swap entry, we have to mark the page possibly shared
and synchronize against GUP-fast by a proper clear/invalidate+flush to
make the following scenario impossible:
1. try_to_unmap() places a swap entry after checking for GUP pins and
clears exclusivity information on the page.
2. GUP-fast pins the page due to lack of synchronization.
-> We have a pinned page that is not marked exclusive anymore.
If we'd ever store information about exclusivity in the swap entry,
similar to migration handling, the same considerations as in II would
apply. This is future work.
Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-09 18:20:44 -07:00
|
|
|
|
mm: ptep_get() conversion
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 16:15:45 +01:00
|
|
|
|
2022-01-28 23:32:59 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:35 -07:00
|
|
|
|
2017-09-08 16:10:57 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-28 23:32:59 -05:00
|
|
|
|
|
|
|
|
|
2017-09-08 16:10:57 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-09-30 16:10:40 +08:00
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
2025-09-30 16:10:40 +08:00
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
2017-09-08 16:10:57 -07:00
|
|
|
|
2022-01-28 23:32:59 -05:00
|
|
|
|
2022-08-11 12:13:29 -04:00
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:35 -07:00
|
|
|
|
mm: ptep_get() conversion
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 16:15:45 +01:00
|
|
|
|
2022-08-11 12:13:29 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-02-06 13:48:01 +05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-06-30 18:54:09 -07:00
|
|
|
|
2023-06-12 17:10:29 -07:00
|
|
|
|
mm: ptep_get() conversion
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 16:15:45 +01:00
|
|
|
|
2020-04-06 20:06:01 -07:00
|
|
|
|
2014-10-02 19:47:41 +01:00
|
|
|
|
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive
Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as
exclusive, and use that information to make GUP pins reliable and stay
consistent with the page mapped into the page table even if the page table
entry gets write-protected.
With that information at hand, we can extend our COW logic to always reuse
anonymous pages that are exclusive. For anonymous pages that might be
shared, the existing logic applies.
As already documented, PG_anon_exclusive is usually only expressive in
combination with a page table entry. Especially PTE vs. PMD-mapped
anonymous pages require more thought, some examples: due to mremap() we
can easily have a single compound page PTE-mapped into multiple page
tables exclusively in a single process -- multiple page table locks apply.
Further, due to MADV_WIPEONFORK we might not necessarily write-protect
all PTEs, and only some subpages might be pinned. Long story short: once
PTE-mapped, we have to track information about exclusivity per sub-page,
but until then, we can just track it for the compound page in the head
page and not having to update a whole bunch of subpages all of the time
for a simple PMD mapping of a THP.
For simplicity, this commit mostly talks about "anonymous pages", while
it's for THP actually "the part of an anonymous folio referenced via a
page table entry".
To not spill PG_anon_exclusive code all over the mm code-base, we let the
anon rmap code to handle all PG_anon_exclusive logic it can easily handle.
If a writable, present page table entry points at an anonymous (sub)page,
that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably
pin (FOLL_PIN) on an anonymous page references via a present page table
entry, it must only pin if PG_anon_exclusive is set for the mapped
(sub)page.
This commit doesn't adjust GUP, so this is only implicitly handled for
FOLL_WRITE, follow-up commits will teach GUP to also respect it for
FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully
reliable.
Whenever an anonymous page is to be shared (fork(), KSM), or when
temporarily unmapping an anonymous page (swap, migration), the relevant
PG_anon_exclusive bit has to be cleared to mark the anonymous page
possibly shared. Clearing will fail if there are GUP pins on the page:
* For fork(), this means having to copy the page and not being able to
share it. fork() protects against concurrent GUP using the PT lock and
the src_mm->write_protect_seq.
* For KSM, this means sharing will fail. For swap this means, unmapping
will fail, For migration this means, migration will fail early. All
three cases protect against concurrent GUP using the PT lock and a
proper clear/invalidate+flush of the relevant page table entry.
This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a
pinned page gets mapped R/O and the successive write fault ends up
replacing the page instead of reusing it. It improves the situation for
O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if
fork() is *not* involved, however swapout and fork() are still
problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP
users will fix the issue for them.
I. Details about basic handling
I.1. Fresh anonymous pages
page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the
given page exclusive via __page_set_anon_rmap(exclusive=1). As that is
the mechanism fresh anonymous pages come into life (besides migration code
where we copy the page->mapping), all fresh anonymous pages will start out
as exclusive.
I.2. COW reuse handling of anonymous pages
When a COW handler stumbles over a (sub)page that's marked exclusive, it
simply reuses it. Otherwise, the handler tries harder under page lock to
detect if the (sub)page is exclusive and can be reused. If exclusive,
page_move_anon_rmap() will mark the given (sub)page exclusive.
Note that hugetlb code does not yet check for PageAnonExclusive(), as it
still uses the old COW logic that is prone to the COW security issue
because hugetlb code cannot really tolerate unnecessary/wrong COW as huge
pages are a scarce resource.
I.3. Migration handling
try_to_migrate() has to try marking an exclusive anonymous page shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. migrate_vma_collect_pmd() and
__split_huge_pmd_locked() are handled similarly.
Writable migration entries implicitly point at shared anonymous pages.
For readable migration entries that information is stored via a new
"readable-exclusive" migration entry, specific to anonymous pages.
When restoring a migration entry in remove_migration_pte(), information
about exlusivity is detected via the migration entry type, and
RMAP_EXCLUSIVE is set accordingly for
page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information.
I.4. Swapout handling
try_to_unmap() has to try marking the mapped page possibly shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. For now, information about exclusivity is lost. In
the future, we might want to remember that information in the swap entry
in some cases, however, it requires more thought, care, and a way to store
that information in swap entries.
I.5. Swapin handling
do_swap_page() will never stumble over exclusive anonymous pages in the
swap cache, as try_to_migrate() prohibits that. do_swap_page() always has
to detect manually if an anonymous page is exclusive and has to set
RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly.
I.6. THP handling
__split_huge_pmd_locked() has to move the information about exclusivity
from the PMD to the PTEs.
a) In case we have a readable-exclusive PMD migration entry, simply
insert readable-exclusive PTE migration entries.
b) In case we have a present PMD entry and we don't want to freeze
("convert to migration entries"), simply forward PG_anon_exclusive to
all sub-pages, no need to temporarily clear the bit.
c) In case we have a present PMD entry and want to freeze, handle it
similar to try_to_migrate(): try marking the page shared first. In
case we fail, we ignore the "freeze" instruction and simply split
ordinarily. try_to_migrate() will properly fail because the THP is
still mapped via PTEs.
When splitting a compound anonymous folio (THP), the information about
exclusivity is implicitly handled via the migration entries: no need to
replicate PG_anon_exclusive manually.
I.7. fork() handling fork() handling is relatively easy, because
PG_anon_exclusive is only expressive for some page table entry types.
a) Present anonymous pages
page_try_dup_anon_rmap() will mark the given subpage shared -- which will
fail if the page is pinned. If it failed, we have to copy (or PTE-map a
PMD to handle it on the PTE level).
Note that device exclusive entries are just a pointer at a PageAnon()
page. fork() will first convert a device exclusive entry to a present
page table and handle it just like present anonymous pages.
b) Device private entry
Device private entries point at PageAnon() pages that cannot be mapped
directly and, therefore, cannot get pinned.
page_try_dup_anon_rmap() will mark the given subpage shared, which cannot
fail because they cannot get pinned.
c) HW poison entries
PG_anon_exclusive will remain untouched and is stale -- the page table
entry is just a placeholder after all.
d) Migration entries
Writable and readable-exclusive entries are converted to readable entries:
possibly shared.
I.8. mprotect() handling
mprotect() only has to properly handle the new readable-exclusive
migration entry:
When write-protecting a migration entry that points at an anonymous page,
remember the information about exclusivity via the "readable-exclusive"
migration entry type.
II. Migration and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a migration entry, we have to mark the page possibly
shared and synchronize against GUP-fast by a proper clear/invalidate+flush
to make the following scenario impossible:
1. try_to_migrate() places a migration entry after checking for GUP pins
and marks the page possibly shared.
2. GUP-fast pins the page due to lack of synchronization
3. fork() converts the "writable/readable-exclusive" migration entry into a
readable migration entry
4. Migration fails due to the GUP pin (failing to freeze the refcount)
5. Migration entries are restored. PG_anon_exclusive is lost
-> We have a pinned page that is not marked exclusive anymore.
Note that we move information about exclusivity from the page to the
migration entry as it otherwise highly overcomplicates fork() and
PTE-mapping a THP.
III. Swapout and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a swap entry, we have to mark the page possibly shared
and synchronize against GUP-fast by a proper clear/invalidate+flush to
make the following scenario impossible:
1. try_to_unmap() places a swap entry after checking for GUP pins and
clears exclusivity information on the page.
2. GUP-fast pins the page due to lack of synchronization.
-> We have a pinned page that is not marked exclusive anymore.
If we'd ever store information about exclusivity in the swap entry,
similar to migration handling, the same considerations as in II would
apply. This is future work.
Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-09 18:20:44 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-09-04 16:36:04 -07:00
|
|
|
|
2021-06-30 18:54:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-09-04 16:36:04 -07:00
|
|
|
|
mm: ptep_get() conversion
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 16:15:45 +01:00
|
|
|
|
2020-09-04 16:36:07 -07:00
|
|
|
|
mm: ptep_get() conversion
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 16:15:45 +01:00
|
|
|
|
2020-09-04 16:36:04 -07:00
|
|
|
|
2019-03-28 20:44:28 -07:00
|
|
|
|
2017-09-08 16:12:17 -07:00
|
|
|
|
2010-10-11 16:03:21 +02:00
|
|
|
|
2022-01-28 23:32:59 -05:00
|
|
|
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 12:58:03 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm/hugetlb: change parameters of arch_make_huge_pte()
Patch series "Subject: [PATCH v2 0/5] Implement huge VMAP and VMALLOC on powerpc 8xx", v2.
This series implements huge VMAP and VMALLOC on powerpc 8xx.
Powerpc 8xx has 4 page sizes:
- 4k
- 16k
- 512k
- 8M
At the time being, vmalloc and vmap only support huge pages which are
leaf at PMD level.
Here the PMD level is 4M, it doesn't correspond to any supported
page size.
For now, implement use of 16k and 512k pages which is done
at PTE level.
Support of 8M pages will be implemented later, it requires use of
hugepd tables.
To allow this, the architecture provides two functions:
- arch_vmap_pte_range_map_size() which tells vmap_pte_range() what
page size to use. A stub returning PAGE_SIZE is provided when the
architecture doesn't provide this function.
- arch_vmap_pte_supported_shift() which tells __vmalloc_node_range()
what page shift to use for a given area size. A stub returning
PAGE_SHIFT is provided when the architecture doesn't provide this
function.
This patch (of 5):
At the time being, arch_make_huge_pte() has the following prototype:
pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
struct page *page, int writable);
vma is used to get the pages shift or size.
vma is also used on Sparc to get vm_flags.
page is not used.
writable is not used.
In order to use this function without a vma, replace vma by shift and
flags. Also remove the used parameters.
Link: https://lkml.kernel.org/r/cover.1620795204.git.christophe.leroy@csgroup.eu
Link: https://lkml.kernel.org/r/f4633ac6a7da2f22f31a04a89e0a7026bb78b15b.1620795204.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-30 18:48:00 -07:00
|
|
|
|
|
|
|
|
|
2022-01-28 23:32:59 -05:00
|
|
|
|
mm/rmap: rename hugepage_add* to hugetlb_add*
Patch series "mm/rmap: interface overhaul", v2.
This series overhauls the rmap interface, to get rid of the "bool
compound" / RMAP_COMPOUND parameter with the goal of making the interface
less error prone, more future proof, and more natural to extend to
"batching". Also, this converts the interface to always consume
folio+subpage, which speeds up operations on large folios.
Further, this series adds PTE-batching variants for 4 rmap functions,
whereby only folio_add_anon_rmap_ptes() is used for batching in this
series when PTE-remapping a PMD-mapped THP. folio_remove_rmap_ptes(),
folio_try_dup_anon_rmap_ptes() and folio_dup_file_rmap_ptes() will soon
come in handy[1,2].
This series performs a lot of folio conversion along the way. Most of the
added LOC in the diff are only due to documentation.
As we're moving to a pte/pmd interface where we clearly express the
mapping granularity we are dealing with, we first get the remainder of
hugetlb out of the way, as it is special and expected to remain special:
it treats everything as a "single logical PTE" and only currently allows
entire mappings.
Even if we'd ever support partial mappings, I strongly assume the
interface and implementation will still differ heavily: hopefull we can
avoid working on subpages/subpage mapcounts completely and only add a
"count" parameter for them to enable batching.
New (extended) hugetlb interface that operates on entire folio:
* hugetlb_add_new_anon_rmap() -> Already existed
* hugetlb_add_anon_rmap() -> Already existed
* hugetlb_try_dup_anon_rmap()
* hugetlb_try_share_anon_rmap()
* hugetlb_add_file_rmap()
* hugetlb_remove_rmap()
New "ordinary" interface for small folios / THP::
* folio_add_new_anon_rmap() -> Already existed
* folio_add_anon_rmap_[pte|ptes|pmd]()
* folio_try_dup_anon_rmap_[pte|ptes|pmd]()
* folio_try_share_anon_rmap_[pte|pmd]()
* folio_add_file_rmap_[pte|ptes|pmd]()
* folio_dup_file_rmap_[pte|ptes|pmd]()
* folio_remove_rmap_[pte|ptes|pmd]()
folio_add_new_anon_rmap() will always map at the largest granularity
possible (currently, a single PMD to cover a PMD-sized THP). Could be
extended if ever required.
In the future, we might want "_pud" variants and eventually "_pmds"
variants for batching.
I ran some simple microbenchmarks on an Intel(R) Xeon(R) Silver 4210R:
measuring munmap(), fork(), cow, MADV_DONTNEED on each PTE ... and PTE
remapping PMD-mapped THPs on 1 GiB of memory.
For small folios, there is barely a change (< 1% improvement for me).
For PTE-mapped THP:
* PTE-remapping a PMD-mapped THP is more than 10% faster.
* fork() is more than 4% faster.
* MADV_DONTNEED is 2% faster
* COW when writing only a single byte on a COW-shared PTE is 1% faster
* munmap() barely changes (< 1%).
[1] https://lkml.kernel.org/r/20230810103332.3062143-1-ryan.roberts@arm.com
[2] https://lkml.kernel.org/r/20231204105440.61448-1-ryan.roberts@arm.com
This patch (of 40):
Let's just call it "hugetlb_".
Yes, it's all already inconsistent and confusing because we have a lot of
"hugepage_" functions for legacy reasons. But "hugetlb" cannot possibly
be confused with transparent huge pages, and it matches "hugetlb.c" and
"folio_test_hugetlb()". So let's minimize confusion in rmap code.
Link: https://lkml.kernel.org/r/20231220224504.646757-1-david@redhat.com
Link: https://lkml.kernel.org/r/20231220224504.646757-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-20 23:44:25 +01:00
|
|
|
|
|
|
|
|
|
2017-02-24 14:58:16 -08:00
|
|
|
|
2023-12-20 23:44:27 +01:00
|
|
|
|
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 12:58:03 +01:00
|
|
|
|
|
|
|
|
|
2017-07-06 15:38:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-28 23:32:59 -05:00
|
|
|
|
2023-12-20 23:44:41 +01:00
|
|
|
|
|
|
|
|
|
2017-07-06 15:38:41 -07:00
|
|
|
|
2023-12-20 23:44:34 +01:00
|
|
|
|
2022-01-14 14:06:29 -08:00
|
|
|
|
2017-07-06 15:38:41 -07:00
|
|
|
|
mm: use READ/WRITE_ONCE() for vma->vm_flags on migrate, mprotect
According to the syzbot report referenced here, it is possible to
encounter a race between mprotect() writing to the vma->vm_flags field and
migration checking whether the VMA is locked.
There is no real problem with timing here per se, only that torn
reads/writes may occur. Therefore, as a proximate fix, ensure both
operations READ_ONCE() and WRITE_ONCE() to avoid this.
This race is possible due to the ability to look up VMAs via the rmap,
which migration does in this case, which takes no mmap or VMA lock and
therefore does not preclude an operation to modify a VMA.
When the final update of VMA flags is performed by mprotect, this will
cause the rmap lock to be taken while the VMA is inserted on split/merge.
However the means by which we perform splits/merges in the kernel is that
we perform the split/merge operation on the VMA, acquiring/releasing locks
as needed, and only then, after having done so, modifying fields.
We should carefully examine and determine whether we can combine the two
operations so as to avoid such races, and whether it might be possible to
otherwise annotate these rmap field accesses.
Link: https://lkml.kernel.org/r/20250207172442.78836-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: syzbot+c2e5712cbb14c95d4847@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67a34e60.050a0220.50516.0040.GAE@google.com/
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-02-07 17:24:42 +00:00
|
|
|
|
2023-01-12 12:39:31 +00:00
|
|
|
|
mm, thp: fix mlocking THP page with migration enabled
A transparent huge page is represented by a single entry on an LRU list.
Therefore, we can only make unevictable an entire compound page, not
individual subpages.
If a user tries to mlock() part of a huge page, we want the rest of the
page to be reclaimable.
We handle this by keeping PTE-mapped huge pages on normal LRU lists: the
PMD on border of VM_LOCKED VMA will be split into PTE table.
Introduction of THP migration breaks[1] the rules around mlocking THP
pages. If we had a single PMD mapping of the page in mlocked VMA, the
page will get mlocked, regardless of PTE mappings of the page.
For tmpfs/shmem it's easy to fix by checking PageDoubleMap() in
remove_migration_pmd().
Anon THP pages can only be shared between processes via fork(). Mlocked
page can only be shared if parent mlocked it before forking, otherwise CoW
will be triggered on mlock().
For Anon-THP, we can fix the issue by munlocking the page on removing PTE
migration entry for the page. PTEs for the page will always come after
mlocked PMD: rmap walks VMAs from oldest to newest.
Test-case:
#include <unistd.h>
#include <sys/mman.h>
#include <sys/wait.h>
#include <linux/mempolicy.h>
#include <numaif.h>
int main(void)
{
unsigned long nodemask = 4;
void *addr;
addr = mmap((void *)0x20000000UL, 2UL << 20, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_LOCKED, -1, 0);
if (fork()) {
wait(NULL);
return 0;
}
mlock(addr, 4UL << 10);
mbind(addr, 2UL << 20, MPOL_PREFERRED | MPOL_F_RELATIVE_NODES,
&nodemask, 4, MPOL_MF_MOVE);
return 0;
}
[1] https://lkml.kernel.org/r/CAOMGZ=G52R-30rZvhGxEbkTw7rLLwBGadVYeo--iizcD3upL3A@mail.gmail.com
Link: http://lkml.kernel.org/r/20180917133816.43995-1-kirill.shutemov@linux.intel.com
Fixes: 616b8371539a ("mm: thp: enable thp migration in generic path")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-05 15:51:41 -07:00
|
|
|
|
2022-03-24 18:10:01 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-02-24 14:58:16 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-11-05 18:49:37 -08:00
|
|
|
|
2017-05-03 14:54:27 -07:00
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:35 -07:00
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:38 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
2006-06-23 02:03:38 -07:00
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-01-21 15:49:48 -08:00
|
|
|
|
|
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
2014-01-21 15:49:48 -08:00
|
|
|
|
|
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-29 16:06:53 -05:00
|
|
|
|
2016-03-17 14:20:07 -07:00
|
|
|
|
2022-01-29 16:06:53 -05:00
|
|
|
|
2006-06-23 02:03:38 -07:00
|
|
|
|
|
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:35 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 18:08:20 -07:00
|
|
|
|
|
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:35 -07:00
|
|
|
|
2023-06-08 18:08:20 -07:00
|
|
|
|
|
|
|
|
|
2013-06-12 14:05:04 -07:00
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:35 -07:00
|
|
|
|
|
|
|
|
|
2023-06-08 18:08:20 -07:00
|
|
|
|
2023-06-08 18:29:22 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: ptep_get() conversion
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 16:15:45 +01:00
|
|
|
|
2023-06-08 18:08:20 -07:00
|
|
|
|
|
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:35 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 18:08:20 -07:00
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:03:35 -07:00
|
|
|
|
|
|
|
|
|
2023-06-08 18:08:20 -07:00
|
|
|
|
2013-06-12 14:05:04 -07:00
|
|
|
|
|
|
|
|
|
2022-05-30 19:30:16 +08:00
|
|
|
|
2022-12-16 10:50:55 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-02 15:51:20 +02:00
|
|
|
|
2013-06-12 14:05:04 -07:00
|
|
|
|
2023-06-08 18:08:20 -07:00
|
|
|
|
2022-05-30 19:30:16 +08:00
|
|
|
|
|
|
|
|
|
2022-12-16 10:50:55 -05:00
|
|
|
|
2022-05-30 19:30:16 +08:00
|
|
|
|
2024-07-02 15:51:20 +02:00
|
|
|
|
2022-05-30 19:30:16 +08:00
|
|
|
|
2022-12-16 10:50:55 -05:00
|
|
|
|
2022-05-30 19:30:16 +08:00
|
|
|
|
2022-12-16 10:50:55 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 18:08:20 -07:00
|
|
|
|
2022-12-16 10:50:55 -05:00
|
|
|
|
2013-06-12 14:05:04 -07:00
|
|
|
|
2022-05-30 19:30:16 +08:00
|
|
|
|
|
|
|
|
|
2017-09-08 16:10:57 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 18:08:20 -07:00
|
|
|
|
2017-09-08 16:10:57 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2024-06-26 16:53:25 +08:00
|
|
|
|
2006-06-23 02:03:29 -07:00
|
|
|
|
|
|
|
|
|
2024-06-26 16:53:25 +08:00
|
|
|
|
|
|
|
|
|
2024-10-02 05:01:08 +01:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2024-06-26 16:53:25 +08:00
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
mm, swap: use the swap table for the swap cache and switch API
Introduce basic swap table infrastructures, which are now just a
fixed-sized flat array inside each swap cluster, with access wrappers.
Each cluster contains a swap table of 512 entries. Each table entry is an
opaque atomic long. It could be in 3 types: a shadow type (XA_VALUE), a
folio type (pointer), or NULL.
In this first step, it only supports storing a folio or shadow, and it is
a drop-in replacement for the current swap cache. Convert all swap cache
users to use the new sets of APIs. Chris Li has been suggesting using a
new infrastructure for swap cache for better performance, and that idea
combined well with the swap table as the new backing structure. Now the
lock contention range is reduced to 2M clusters, which is much smaller
than the 64M address_space. And we can also drop the multiple
address_space design.
All the internal works are done with swap_cache_get_* helpers. Swap cache
lookup is still lock-less like before, and the helper's contexts are same
with original swap cache helpers. They still require a pin on the swap
device to prevent the backing data from being freed.
Swap cache updates are now protected by the swap cluster lock instead of
the XArray lock. This is mostly handled internally, but new
__swap_cache_* helpers require the caller to lock the cluster. So, a few
new cluster access and locking helpers are also introduced.
A fully cluster-based unified swap table can be implemented on top of this
to take care of all count tracking and synchronization work, with dynamic
allocation. It should reduce the memory usage while making the
performance even better.
Link: https://lkml.kernel.org/r/20250916160100.31545-12-ryncsn@gmail.com
Co-developed-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-09-17 00:00:56 +08:00
|
|
|
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 18:50:05 -08:00
|
|
|
|
|
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
2017-09-08 16:12:09 -07:00
|
|
|
|
2006-06-23 02:03:37 -07:00
|
|
|
|
mm: fix crashes from deferred split racing folio migration
Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on
flags when freeing, yet the flags shown are not bad: PG_locked had been
set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from
deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN
symptoms implying double free by deferred split and large folio migration.
6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large
folio migration") was right to fix the memcg-dependent locking broken in
85ce2c517ade ("memcontrol: only transfer the memcg data for migration"),
but missed a subtlety of deferred_split_scan(): it moves folios to its own
local list to work on them without split_queue_lock, during which time
folio->_deferred_list is not empty, but even the "right" lock does nothing
to secure the folio and the list it is on.
Fortunately, deferred_split_scan() is careful to use folio_try_get(): so
folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable()
while the old folio's reference count is temporarily frozen to 0 - adding
such a freeze in the !mapping case too (originally, folio lock and
unmapping and no swap cache left an anon folio unreachable, so no freezing
was needed there: but the deferred split queue offers a way to reach it).
Link: https://lkml.kernel.org/r/29c83d1a-11ca-b6c9-f92e-6ccb322af510@google.com
Fixes: 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-02 00:40:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm/thp: fix deferred split unqueue naming and locking
Recent changes are putting more pressure on THP deferred split queues:
under load revealing long-standing races, causing list_del corruptions,
"Bad page state"s and worse (I keep BUGs in both of those, so usually
don't get to see how badly they end up without). The relevant recent
changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin,
improved swap allocation, and underused THP splitting.
Before fixing locking: rename misleading folio_undo_large_rmappable(),
which does not undo large_rmappable, to folio_unqueue_deferred_split(),
which is what it does. But that and its out-of-line __callee are mm
internals of very limited usability: add comment and WARN_ON_ONCEs to
check usage; and return a bool to say if a deferred split was unqueued,
which can then be used in WARN_ON_ONCEs around safety checks (sparing
callers the arcane conditionals in __folio_unqueue_deferred_split()).
Just omit the folio_unqueue_deferred_split() from free_unref_folios(), all
of whose callers now call it beforehand (and if any forget then bad_page()
will tell) - except for its caller put_pages_list(), which itself no
longer has any callers (and will be deleted separately).
Swapout: mem_cgroup_swapout() has been resetting folio->memcg_data 0
without checking and unqueueing a THP folio from deferred split list;
which is unfortunate, since the split_queue_lock depends on the memcg
(when memcg is enabled); so swapout has been unqueueing such THPs later,
when freeing the folio, using the pgdat's lock instead: potentially
corrupting the memcg's list. __remove_mapping() has frozen refcount to 0
here, so no problem with calling folio_unqueue_deferred_split() before
resetting memcg_data.
That goes back to 5.4 commit 87eaceb3faa5 ("mm: thp: make deferred split
shrinker memcg aware"): which included a check on swapcache before adding
to deferred queue, but no check on deferred queue before adding THP to
swapcache. That worked fine with the usual sequence of events in reclaim
(though there were a couple of rare ways in which a THP on deferred queue
could have been swapped out), but 6.12 commit dafff3f4c850 ("mm: split
underused THPs") avoids splitting underused THPs in reclaim, which makes
swapcache THPs on deferred queue commonplace.
Keep the check on swapcache before adding to deferred queue? Yes: it is
no longer essential, but preserves the existing behaviour, and is likely
to be a worthwhile optimization (vmstat showed much more traffic on the
queue under swapping load if the check was removed); update its comment.
Memcg-v1 move (deprecated): mem_cgroup_move_account() has been changing
folio->memcg_data without checking and unqueueing a THP folio from the
deferred list, sometimes corrupting "from" memcg's list, like swapout.
Refcount is non-zero here, so folio_unqueue_deferred_split() can only be
used in a WARN_ON_ONCE to validate the fix, which must be done earlier:
mem_cgroup_move_charge_pte_range() first try to split the THP (splitting
of course unqueues), or skip it if that fails. Not ideal, but moving
charge has been requested, and khugepaged should repair the THP later:
nobody wants new custom unqueueing code just for this deprecated case.
The 87eaceb3faa5 commit did have the code to move from one deferred list
to another (but was not conscious of its unsafety while refcount non-0);
but that was removed by 5.6 commit fac0516b5534 ("mm: thp: don't need care
deferred split queue in memcg charge move path"), which argued that the
existence of a PMD mapping guarantees that the THP cannot be on a deferred
list. As above, false in rare cases, and now commonly false.
Backport to 6.11 should be straightforward. Earlier backports must take
care that other _deferred_list fixes and dependencies are included. There
is not a strong case for backports, but they can fix cornercases.
Link: https://lkml.kernel.org/r/8dc111ae-f6db-2da7-b25c-7a20b1effe3b@google.com
Fixes: 87eaceb3faa5 ("mm: thp: make deferred split shrinker memcg aware")
Fixes: dafff3f4c850 ("mm: split underused THPs")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-10-27 13:02:13 -07:00
|
|
|
|
mm: fix crashes from deferred split racing folio migration
Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on
flags when freeing, yet the flags shown are not bad: PG_locked had been
set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from
deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN
symptoms implying double free by deferred split and large folio migration.
6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large
folio migration") was right to fix the memcg-dependent locking broken in
85ce2c517ade ("memcontrol: only transfer the memcg data for migration"),
but missed a subtlety of deferred_split_scan(): it moves folios to its own
local list to work on them without split_queue_lock, during which time
folio->_deferred_list is not empty, but even the "right" lock does nothing
to secure the folio and the list it is on.
Fortunately, deferred_split_scan() is careful to use folio_try_get(): so
folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable()
while the old folio's reference count is temporarily frozen to 0 - adding
such a freeze in the !mapping case too (originally, folio lock and
unmapping and no swap cache left an anon folio unreachable, so no freezing
was needed there: but the deferred split queue offers a way to reach it).
Link: https://lkml.kernel.org/r/29c83d1a-11ca-b6c9-f92e-6ccb322af510@google.com
Fixes: 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-02 00:40:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-11-05 18:50:02 -08:00
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
|
|
|
|
|
mm: count the number of anonymous THPs per size
Patch series "mm: count the number of anonymous THPs per size", v4.
Knowing the number of transparent anon THPs in the system is crucial
for performance analysis. It helps in understanding the ratio and
distribution of THPs versus small folios throughout the system.
Additionally, partial unmapping by userspace can lead to significant waste
of THPs over time and increase memory reclamation pressure. We need this
information for comprehensive system tuning.
This patch (of 2):
Let's track for each anonymous THP size, how many of them are currently
allocated. We'll track the complete lifespan of an anon THP, starting
when it becomes an anon THP ("large anon folio") (->mapping gets set),
until it gets freed (->mapping gets cleared).
Introduce a new "nr_anon" counter per THP size and adjust the
corresponding counter in the following cases:
* We allocate a new THP and call folio_add_new_anon_rmap() to map
it the first time and turn it into an anon THP.
* We split an anon THP into multiple smaller ones.
* We migrate an anon THP, when we prepare the destination.
* We free an anon THP back to the buddy.
Note that AnonPages in /proc/meminfo currently tracks the total number of
*mapped* anonymous *pages*, and therefore has slightly different
semantics. In the future, we might also want to track "nr_anon_mapped"
for each THP size, which might be helpful when comparing it to the number
of allocated anon THPs (long-term pinning, stuck in swapcache, memory
leaks, ...).
Further note that for now, we only track anon THPs after they got their
->mapping set, for example via folio_add_new_anon_rmap(). If we would
allocate some in the swapcache, they will only show up in the statistics
for now after they have been mapped to user space the first time, where we
call folio_add_new_anon_rmap().
[akpm@linux-foundation.org: documentation fixups, per David]
Link: https://lkml.kernel.org/r/3e8add35-e26b-443b-8a04-1078f4bc78f6@redhat.com
Link: https://lkml.kernel.org/r/20240824010441.21308-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240824010441.21308-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuai Yuan <yuanshuai@oppo.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-24 13:04:40 +12:00
|
|
|
|
|
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
|
|
|
|
|
2015-11-05 18:50:02 -08:00
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2006-06-23 02:03:37 -07:00
|
|
|
|
|
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
|
|
|
|
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 18:50:05 -08:00
|
|
|
|
mm, swap: use the swap table for the swap cache and switch API
Introduce basic swap table infrastructures, which are now just a
fixed-sized flat array inside each swap cluster, with access wrappers.
Each cluster contains a swap table of 512 entries. Each table entry is an
opaque atomic long. It could be in 3 types: a shadow type (XA_VALUE), a
folio type (pointer), or NULL.
In this first step, it only supports storing a folio or shadow, and it is
a drop-in replacement for the current swap cache. Convert all swap cache
users to use the new sets of APIs. Chris Li has been suggesting using a
new infrastructure for swap cache for better performance, and that idea
combined well with the swap table as the new backing structure. Now the
lock contention range is reduced to 2M clusters, which is much smaller
than the 64M address_space. And we can also drop the multiple
address_space design.
All the internal works are done with swap_cache_get_* helpers. Swap cache
lookup is still lock-less like before, and the helper's contexts are same
with original swap cache helpers. They still require a pin on the swap
device to prevent the backing data from being freed.
Swap cache updates are now protected by the swap cluster lock instead of
the XArray lock. This is mostly handled internally, but new
__swap_cache_* helpers require the caller to lock the cluster. So, a few
new cluster access and locking helpers are also introduced.
A fully cluster-based unified swap table can be implemented on top of this
to take care of all count tracking and synchronization work, with dynamic
allocation. It should reduce the memory usage while making the
performance even better.
Link: https://lkml.kernel.org/r/20250916160100.31545-12-ryncsn@gmail.com
Co-developed-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-09-17 00:00:56 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
mm, swap: use the swap table for the swap cache and switch API
Introduce basic swap table infrastructures, which are now just a
fixed-sized flat array inside each swap cluster, with access wrappers.
Each cluster contains a swap table of 512 entries. Each table entry is an
opaque atomic long. It could be in 3 types: a shadow type (XA_VALUE), a
folio type (pointer), or NULL.
In this first step, it only supports storing a folio or shadow, and it is
a drop-in replacement for the current swap cache. Convert all swap cache
users to use the new sets of APIs. Chris Li has been suggesting using a
new infrastructure for swap cache for better performance, and that idea
combined well with the swap table as the new backing structure. Now the
lock contention range is reduced to 2M clusters, which is much smaller
than the 64M address_space. And we can also drop the multiple
address_space design.
All the internal works are done with swap_cache_get_* helpers. Swap cache
lookup is still lock-less like before, and the helper's contexts are same
with original swap cache helpers. They still require a pin on the swap
device to prevent the backing data from being freed.
Swap cache updates are now protected by the swap cluster lock instead of
the XArray lock. This is mostly handled internally, but new
__swap_cache_* helpers require the caller to lock the cluster. So, a few
new cluster access and locking helpers are also introduced.
A fully cluster-based unified swap table can be implemented on top of this
to take care of all count tracking and synchronization work, with dynamic
allocation. It should reduce the memory usage while making the
performance even better.
Link: https://lkml.kernel.org/r/20250916160100.31545-12-ryncsn@gmail.com
Co-developed-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-09-17 00:00:56 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2008-07-25 19:45:30 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: fix crashes from deferred split racing folio migration
Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on
flags when freeing, yet the flags shown are not bad: PG_locked had been
set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from
deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN
symptoms implying double free by deferred split and large folio migration.
6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large
folio migration") was right to fix the memcg-dependent locking broken in
85ce2c517ade ("memcontrol: only transfer the memcg data for migration"),
but missed a subtlety of deferred_split_scan(): it moves folios to its own
local list to work on them without split_queue_lock, during which time
folio->_deferred_list is not empty, but even the "right" lock does nothing
to secure the folio and the list it is on.
Fortunately, deferred_split_scan() is careful to use folio_try_get(): so
folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable()
while the old folio's reference count is temporarily frozen to 0 - adding
such a freeze in the !mapping case too (originally, folio lock and
unmapping and no swap cache left an anon folio unreachable, so no freezing
was needed there: but the deferred split queue offers a way to reach it).
Link: https://lkml.kernel.org/r/29c83d1a-11ca-b6c9-f92e-6ccb322af510@google.com
Fixes: 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-02 00:40:55 -07:00
|
|
|
|
mm/thp: fix deferred split unqueue naming and locking
Recent changes are putting more pressure on THP deferred split queues:
under load revealing long-standing races, causing list_del corruptions,
"Bad page state"s and worse (I keep BUGs in both of those, so usually
don't get to see how badly they end up without). The relevant recent
changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin,
improved swap allocation, and underused THP splitting.
Before fixing locking: rename misleading folio_undo_large_rmappable(),
which does not undo large_rmappable, to folio_unqueue_deferred_split(),
which is what it does. But that and its out-of-line __callee are mm
internals of very limited usability: add comment and WARN_ON_ONCEs to
check usage; and return a bool to say if a deferred split was unqueued,
which can then be used in WARN_ON_ONCEs around safety checks (sparing
callers the arcane conditionals in __folio_unqueue_deferred_split()).
Just omit the folio_unqueue_deferred_split() from free_unref_folios(), all
of whose callers now call it beforehand (and if any forget then bad_page()
will tell) - except for its caller put_pages_list(), which itself no
longer has any callers (and will be deleted separately).
Swapout: mem_cgroup_swapout() has been resetting folio->memcg_data 0
without checking and unqueueing a THP folio from deferred split list;
which is unfortunate, since the split_queue_lock depends on the memcg
(when memcg is enabled); so swapout has been unqueueing such THPs later,
when freeing the folio, using the pgdat's lock instead: potentially
corrupting the memcg's list. __remove_mapping() has frozen refcount to 0
here, so no problem with calling folio_unqueue_deferred_split() before
resetting memcg_data.
That goes back to 5.4 commit 87eaceb3faa5 ("mm: thp: make deferred split
shrinker memcg aware"): which included a check on swapcache before adding
to deferred queue, but no check on deferred queue before adding THP to
swapcache. That worked fine with the usual sequence of events in reclaim
(though there were a couple of rare ways in which a THP on deferred queue
could have been swapped out), but 6.12 commit dafff3f4c850 ("mm: split
underused THPs") avoids splitting underused THPs in reclaim, which makes
swapcache THPs on deferred queue commonplace.
Keep the check on swapcache before adding to deferred queue? Yes: it is
no longer essential, but preserves the existing behaviour, and is likely
to be a worthwhile optimization (vmstat showed much more traffic on the
queue under swapping load if the check was removed); update its comment.
Memcg-v1 move (deprecated): mem_cgroup_move_account() has been changing
folio->memcg_data without checking and unqueueing a THP folio from the
deferred list, sometimes corrupting "from" memcg's list, like swapout.
Refcount is non-zero here, so folio_unqueue_deferred_split() can only be
used in a WARN_ON_ONCE to validate the fix, which must be done earlier:
mem_cgroup_move_charge_pte_range() first try to split the THP (splitting
of course unqueues), or skip it if that fails. Not ideal, but moving
charge has been requested, and khugepaged should repair the THP later:
nobody wants new custom unqueueing code just for this deprecated case.
The 87eaceb3faa5 commit did have the code to move from one deferred list
to another (but was not conscious of its unsafety while refcount non-0);
but that was removed by 5.6 commit fac0516b5534 ("mm: thp: don't need care
deferred split queue in memcg charge move path"), which argued that the
existence of a PMD mapping guarantees that the THP cannot be on a deferred
list. As above, false in rare cases, and now commonly false.
Backport to 6.11 should be straightforward. Earlier backports must take
care that other _deferred_list fixes and dependencies are included. There
is not a strong case for backports, but they can fix cornercases.
Link: https://lkml.kernel.org/r/8dc111ae-f6db-2da7-b25c-7a20b1effe3b@google.com
Fixes: 87eaceb3faa5 ("mm: thp: make deferred split shrinker memcg aware")
Fixes: dafff3f4c850 ("mm: split underused THPs")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-10-27 13:02:13 -07:00
|
|
|
|
mm: fix crashes from deferred split racing folio migration
Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on
flags when freeing, yet the flags shown are not bad: PG_locked had been
set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from
deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN
symptoms implying double free by deferred split and large folio migration.
6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large
folio migration") was right to fix the memcg-dependent locking broken in
85ce2c517ade ("memcontrol: only transfer the memcg data for migration"),
but missed a subtlety of deferred_split_scan(): it moves folios to its own
local list to work on them without split_queue_lock, during which time
folio->_deferred_list is not empty, but even the "right" lock does nothing
to secure the folio and the list it is on.
Fortunately, deferred_split_scan() is careful to use folio_try_get(): so
folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable()
while the old folio's reference count is temporarily frozen to 0 - adding
such a freeze in the !mapping case too (originally, folio lock and
unmapping and no swap cache left an anon folio unreachable, so no freezing
was needed there: but the deferred split queue offers a way to reach it).
Link: https://lkml.kernel.org/r/29c83d1a-11ca-b6c9-f92e-6ccb322af510@google.com
Fixes: 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-07-02 00:40:55 -07:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
2015-11-05 18:50:02 -08:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
|
|
|
|
|
mm: count the number of anonymous THPs per size
Patch series "mm: count the number of anonymous THPs per size", v4.
Knowing the number of transparent anon THPs in the system is crucial
for performance analysis. It helps in understanding the ratio and
distribution of THPs versus small folios throughout the system.
Additionally, partial unmapping by userspace can lead to significant waste
of THPs over time and increase memory reclamation pressure. We need this
information for comprehensive system tuning.
This patch (of 2):
Let's track for each anonymous THP size, how many of them are currently
allocated. We'll track the complete lifespan of an anon THP, starting
when it becomes an anon THP ("large anon folio") (->mapping gets set),
until it gets freed (->mapping gets cleared).
Introduce a new "nr_anon" counter per THP size and adjust the
corresponding counter in the following cases:
* We allocate a new THP and call folio_add_new_anon_rmap() to map
it the first time and turn it into an anon THP.
* We split an anon THP into multiple smaller ones.
* We migrate an anon THP, when we prepare the destination.
* We free an anon THP back to the buddy.
Note that AnonPages in /proc/meminfo currently tracks the total number of
*mapped* anonymous *pages*, and therefore has slightly different
semantics. In the future, we might also want to track "nr_anon_mapped"
for each THP size, which might be helpful when comparing it to the number
of allocated anon THPs (long-term pinning, stuck in swapcache, memory
leaks, ...).
Further note that for now, we only track anon THPs after they got their
->mapping set, for example via folio_add_new_anon_rmap(). If we would
allocate some in the swapcache, they will only show up in the statistics
for now after they have been mapped to user space the first time, where we
call folio_add_new_anon_rmap().
[akpm@linux-foundation.org: documentation fixups, per David]
Link: https://lkml.kernel.org/r/3e8add35-e26b-443b-8a04-1078f4bc78f6@redhat.com
Link: https://lkml.kernel.org/r/20240824010441.21308-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240824010441.21308-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuai Yuan <yuanshuai@oppo.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-24 13:04:40 +12:00
|
|
|
|
|
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
mm/migrate: fix shmem xarray update during migration
A shmem folio can be either in page cache or in swap cache, but not at the
same time. Namely, once it is in swap cache, folio->mapping should be
NULL, and the folio is no longer in a shmem mapping.
In __folio_migrate_mapping(), to determine the number of xarray entries to
update, folio_test_swapbacked() is used, but that conflates shmem in page
cache case and shmem in swap cache case. It leads to xarray multi-index
entry corruption, since it turns a sibling entry to a normal entry during
xas_store() (see [1] for a userspace reproduction). Fix it by only using
folio_test_swapcache() to determine whether xarray is storing swap cache
entries or not to choose the right number of xarray entries to update.
[1] https://lore.kernel.org/linux-mm/Z8idPCkaJW1IChjT@casper.infradead.org/
Note:
In __split_huge_page(), folio_test_anon() && folio_test_swapcache() is
used to get swap_cache address space, but that ignores the shmem folio in
swap cache case. It could lead to NULL pointer dereferencing when a
in-swap-cache shmem folio is split at __xa_store(), since
!folio_test_anon() is true and folio->mapping is NULL. But fortunately,
its caller split_huge_page_to_list_to_order() bails out early with EBUSY
when folio->mapping is NULL. So no need to take care of it here.
Link: https://lkml.kernel.org/r/20250305200403.2822855-1-ziy@nvidia.com
Fixes: fc346d0a70a1 ("mm: migrate high-order folios in swap cache correctly")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: Liu Shixin <liushixin2@huawei.com>
Closes: https://lore.kernel.org/all/28546fb4-5210-bf75-16d6-43e1f8646080@huawei.com/
Suggested-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-05 15:04:03 -05:00
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
mm/migrate: fix shmem xarray update during migration
A shmem folio can be either in page cache or in swap cache, but not at the
same time. Namely, once it is in swap cache, folio->mapping should be
NULL, and the folio is no longer in a shmem mapping.
In __folio_migrate_mapping(), to determine the number of xarray entries to
update, folio_test_swapbacked() is used, but that conflates shmem in page
cache case and shmem in swap cache case. It leads to xarray multi-index
entry corruption, since it turns a sibling entry to a normal entry during
xas_store() (see [1] for a userspace reproduction). Fix it by only using
folio_test_swapcache() to determine whether xarray is storing swap cache
entries or not to choose the right number of xarray entries to update.
[1] https://lore.kernel.org/linux-mm/Z8idPCkaJW1IChjT@casper.infradead.org/
Note:
In __split_huge_page(), folio_test_anon() && folio_test_swapcache() is
used to get swap_cache address space, but that ignores the shmem folio in
swap cache case. It could lead to NULL pointer dereferencing when a
in-swap-cache shmem folio is split at __xa_store(), since
!folio_test_anon() is true and folio->mapping is NULL. But fortunately,
its caller split_huge_page_to_list_to_order() bails out early with EBUSY
when folio->mapping is NULL. So no need to take care of it here.
Link: https://lkml.kernel.org/r/20250305200403.2822855-1-ziy@nvidia.com
Fixes: fc346d0a70a1 ("mm: migrate high-order folios in swap cache correctly")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: Liu Shixin <liushixin2@huawei.com>
Closes: https://lore.kernel.org/all/28546fb4-5210-bf75-16d6-43e1f8646080@huawei.com/
Suggested-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-05 15:04:03 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
|
|
|
|
|
2024-06-26 16:53:25 +08:00
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 18:50:05 -08:00
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
|
|
|
|
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 18:50:05 -08:00
|
|
|
|
|
|
|
|
|
mm, swap: wrap swap cache replacement with a helper
There are currently three swap cache users that are trying to replace an
existing folio with a new one: huge memory splitting, migration, and shmem
replacement. What they are doing is quite similar.
Introduce a common helper for this. In later commits, this can be easily
switched to use the swap table by updating this helper.
The newly added helper also makes the swap cache API better defined, and
make debugging easier by adding a few more debug checks.
Migration and shmem replace are meant to clone the folio, including
content, swap entry value, and flags. And splitting will adjust each sub
folio's swap entry according to order, which could be non-uniform in the
future. So document it clearly that it's the caller's responsibility to
set up the new folio's swap entries and flags before calling the helper.
The helper will just follow the new folio's entry value.
This also prepares for replacing high-order folios in the swap cache.
Currently, only splitting to order 0 is allowed for swap cache folios.
Using the new helper, we can handle high-order folio splitting better.
Link: https://lkml.kernel.org/r/20250916160100.31545-11-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chris Li <chrisl@kernel.org>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-09-17 00:00:55 +08:00
|
|
|
|
mm, swap: use the swap table for the swap cache and switch API
Introduce basic swap table infrastructures, which are now just a
fixed-sized flat array inside each swap cluster, with access wrappers.
Each cluster contains a swap table of 512 entries. Each table entry is an
opaque atomic long. It could be in 3 types: a shadow type (XA_VALUE), a
folio type (pointer), or NULL.
In this first step, it only supports storing a folio or shadow, and it is
a drop-in replacement for the current swap cache. Convert all swap cache
users to use the new sets of APIs. Chris Li has been suggesting using a
new infrastructure for swap cache for better performance, and that idea
combined well with the swap table as the new backing structure. Now the
lock contention range is reduced to 2M clusters, which is much smaller
than the 64M address_space. And we can also drop the multiple
address_space design.
All the internal works are done with swap_cache_get_* helpers. Swap cache
lookup is still lock-less like before, and the helper's contexts are same
with original swap cache helpers. They still require a pin on the swap
device to prevent the backing data from being freed.
Swap cache updates are now protected by the swap cluster lock instead of
the XArray lock. This is mostly handled internally, but new
__swap_cache_* helpers require the caller to lock the cluster. So, a few
new cluster access and locking helpers are also introduced.
A fully cluster-based unified swap table can be implemented on top of this
to take care of all count tracking and synchronization work, with dynamic
allocation. It should reduce the memory usage while making the
performance even better.
Link: https://lkml.kernel.org/r/20250916160100.31545-12-ryncsn@gmail.com
Co-developed-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-09-17 00:00:56 +08:00
|
|
|
|
mm, swap: wrap swap cache replacement with a helper
There are currently three swap cache users that are trying to replace an
existing folio with a new one: huge memory splitting, migration, and shmem
replacement. What they are doing is quite similar.
Introduce a common helper for this. In later commits, this can be easily
switched to use the swap table by updating this helper.
The newly added helper also makes the swap cache API better defined, and
make debugging easier by adding a few more debug checks.
Migration and shmem replace are meant to clone the folio, including
content, swap entry value, and flags. And splitting will adjust each sub
folio's swap entry according to order, which could be non-uniform in the
future. So document it clearly that it's the caller's responsibility to
set up the new folio's swap entries and flags before calling the helper.
The helper will just follow the new folio's entry value.
This also prepares for replacing high-order folios in the swap cache.
Currently, only splitting to order 0 is allowed for swap cache folios.
Using the new helper, we can handle high-order folio splitting better.
Link: https://lkml.kernel.org/r/20250916160100.31545-11-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chris Li <chrisl@kernel.org>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-09-17 00:00:55 +08:00
|
|
|
|
2023-12-14 04:58:41 +00:00
|
|
|
|
2006-12-06 20:33:44 -08:00
|
|
|
|
|
|
|
|
|
2024-06-26 16:53:25 +08:00
|
|
|
|
2012-01-10 15:07:11 -08:00
|
|
|
|
2006-12-06 20:33:44 -08:00
|
|
|
|
|
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
2006-12-06 20:33:44 -08:00
|
|
|
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 18:50:05 -08:00
|
|
|
|
mm, swap: use the swap table for the swap cache and switch API
Introduce basic swap table infrastructures, which are now just a
fixed-sized flat array inside each swap cluster, with access wrappers.
Each cluster contains a swap table of 512 entries. Each table entry is an
opaque atomic long. It could be in 3 types: a shadow type (XA_VALUE), a
folio type (pointer), or NULL.
In this first step, it only supports storing a folio or shadow, and it is
a drop-in replacement for the current swap cache. Convert all swap cache
users to use the new sets of APIs. Chris Li has been suggesting using a
new infrastructure for swap cache for better performance, and that idea
combined well with the swap table as the new backing structure. Now the
lock contention range is reduced to 2M clusters, which is much smaller
than the 64M address_space. And we can also drop the multiple
address_space design.
All the internal works are done with swap_cache_get_* helpers. Swap cache
lookup is still lock-less like before, and the helper's contexts are same
with original swap cache helpers. They still require a pin on the swap
device to prevent the backing data from being freed.
Swap cache updates are now protected by the swap cluster lock instead of
the XArray lock. This is mostly handled internally, but new
__swap_cache_* helpers require the caller to lock the cluster. So, a few
new cluster access and locking helpers are also introduced.
A fully cluster-based unified swap table can be implemented on top of this
to take care of all count tracking and synchronization work, with dynamic
allocation. It should reduce the memory usage while making the
performance even better.
Link: https://lkml.kernel.org/r/20250916160100.31545-12-ryncsn@gmail.com
Co-developed-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Chris Li <chrisl@kernel.org>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-09-17 00:00:56 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 18:50:05 -08:00
|
|
|
|
2007-04-23 14:41:09 -07:00
|
|
|
|
|
|
|
|
|
2024-06-26 16:53:25 +08:00
|
|
|
|
2007-04-23 14:41:09 -07:00
|
|
|
|
2024-06-26 16:53:25 +08:00
|
|
|
|
2007-04-23 14:41:09 -07:00
|
|
|
|
2024-06-26 16:53:25 +08:00
|
|
|
|
2016-07-28 15:46:17 -07:00
|
|
|
|
2007-04-23 14:41:09 -07:00
|
|
|
|
|
|
|
|
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 18:50:05 -08:00
|
|
|
|
2020-06-03 16:01:54 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
2020-06-03 16:01:54 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-01-23 21:01:15 -08:00
|
|
|
|
|
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
2021-01-23 21:01:15 -08:00
|
|
|
|
|
|
|
|
|
2023-06-19 12:33:51 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 18:50:05 -08:00
|
|
|
|
2021-02-24 12:03:55 -08:00
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
2021-02-24 12:03:55 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-09-24 08:51:40 +02:00
|
|
|
|
2021-01-23 21:01:15 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 18:50:05 -08:00
|
|
|
|
2009-09-21 17:01:33 -07:00
|
|
|
|
mm: migrate dirty page without clear_page_dirty_for_io etc
clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.
No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.
It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).
Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same. Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).
But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 18:50:05 -08:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2024-06-26 16:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: add folio_expected_ref_count() for reference count calculation
Patch series " JFS: Implement migrate_folio for jfs_metapage_aops" v5.
This patchset addresses a warning that occurs during memory compaction due
to JFS's missing migrate_folio operation. The warning was introduced by
commit 7ee3647243e5 ("migrate: Remove call to ->writepage") which added
explicit warnings when filesystem don't implement migrate_folio.
The syzbot reported following [1]:
jfs_metapage_aops does not implement migrate_folio
WARNING: CPU: 1 PID: 5861 at mm/migrate.c:955 fallback_migrate_folio mm/migrate.c:953 [inline]
WARNING: CPU: 1 PID: 5861 at mm/migrate.c:955 move_to_new_folio+0x70e/0x840 mm/migrate.c:1007
Modules linked in:
CPU: 1 UID: 0 PID: 5861 Comm: syz-executor280 Not tainted 6.15.0-rc1-next-20250411-syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
RIP: 0010:fallback_migrate_folio mm/migrate.c:953 [inline]
RIP: 0010:move_to_new_folio+0x70e/0x840 mm/migrate.c:1007
To fix this issue, this series implement metapage_migrate_folio() for JFS
which handles both single and multiple metapages per page configurations.
While most filesystems leverage existing migration implementations like
filemap_migrate_folio(), buffer_migrate_folio_norefs() or
buffer_migrate_folio() (which internally used folio_expected_refs()),
JFS's metapage architecture requires special handling of its private data
during migration. To support this, this series introduce the
folio_expected_ref_count(), which calculates external references to a
folio from page/swap cache, private data, and page table mappings.
This standardized implementation replaces the previous ad-hoc
folio_expected_refs() function and enables JFS to accurately determine
whether a folio has unexpected references before attempting migration.
Implement folio_expected_ref_count() to calculate expected folio reference
counts from:
- Page/swap cache (1 per page)
- Private data (1)
- Page table mappings (1 per map)
While originally needed for page migration operations, this improved
implementation standardizes reference counting by consolidating all
refcount contributors into a single, reusable function that can benefit
any subsystem needing to detect unexpected references to folios.
The folio_expected_ref_count() returns the sum of these external
references without including any reference the caller itself might hold.
Callers comparing against the actual folio_ref_count() must account for
their own references separately.
Link: https://syzkaller.appspot.com/bug?extid=8bb6fd945af4e0ad9299 [1]
Link: https://lkml.kernel.org/r/20250430100150.279751-1-shivankg@amd.com
Link: https://lkml.kernel.org/r/20250430100150.279751-2-shivankg@amd.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Co-developed-by: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-04-30 10:01:51 +00:00
|
|
|
|
2024-06-26 16:53:25 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
|
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
|
|
|
|
|
2022-06-06 10:47:21 -04:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
2022-06-06 10:47:21 -04:00
|
|
|
|
mm: add folio_expected_ref_count() for reference count calculation
Patch series " JFS: Implement migrate_folio for jfs_metapage_aops" v5.
This patchset addresses a warning that occurs during memory compaction due
to JFS's missing migrate_folio operation. The warning was introduced by
commit 7ee3647243e5 ("migrate: Remove call to ->writepage") which added
explicit warnings when filesystem don't implement migrate_folio.
The syzbot reported following [1]:
jfs_metapage_aops does not implement migrate_folio
WARNING: CPU: 1 PID: 5861 at mm/migrate.c:955 fallback_migrate_folio mm/migrate.c:953 [inline]
WARNING: CPU: 1 PID: 5861 at mm/migrate.c:955 move_to_new_folio+0x70e/0x840 mm/migrate.c:1007
Modules linked in:
CPU: 1 UID: 0 PID: 5861 Comm: syz-executor280 Not tainted 6.15.0-rc1-next-20250411-syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
RIP: 0010:fallback_migrate_folio mm/migrate.c:953 [inline]
RIP: 0010:move_to_new_folio+0x70e/0x840 mm/migrate.c:1007
To fix this issue, this series implement metapage_migrate_folio() for JFS
which handles both single and multiple metapages per page configurations.
While most filesystems leverage existing migration implementations like
filemap_migrate_folio(), buffer_migrate_folio_norefs() or
buffer_migrate_folio() (which internally used folio_expected_refs()),
JFS's metapage architecture requires special handling of its private data
during migration. To support this, this series introduce the
folio_expected_ref_count(), which calculates external references to a
folio from page/swap cache, private data, and page table mappings.
This standardized implementation replaces the previous ad-hoc
folio_expected_refs() function and enables JFS to accurately determine
whether a folio has unexpected references before attempting migration.
Implement folio_expected_ref_count() to calculate expected folio reference
counts from:
- Page/swap cache (1 per page)
- Private data (1)
- Page table mappings (1 per map)
While originally needed for page migration operations, this improved
implementation standardizes reference counting by consolidating all
refcount contributors into a single, reusable function that can benefit
any subsystem needing to detect unexpected references to folios.
The folio_expected_ref_count() returns the sum of these external
references without including any reference the caller itself might hold.
Callers comparing against the actual folio_ref_count() must account for
their own references separately.
Link: https://syzkaller.appspot.com/bug?extid=8bb6fd945af4e0ad9299 [1]
Link: https://lkml.kernel.org/r/20250430100150.279751-1-shivankg@amd.com
Link: https://lkml.kernel.org/r/20250430100150.279751-2-shivankg@amd.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Co-developed-by: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-04-30 10:01:51 +00:00
|
|
|
|
2024-06-26 16:53:27 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
2017-12-04 04:35:16 -05:00
|
|
|
|
2022-06-06 10:47:21 -04:00
|
|
|
|
2017-12-04 04:35:16 -05:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-06-06 10:47:21 -04:00
|
|
|
|
|
|
|
|
|
2016-03-15 14:57:19 -07:00
|
|
|
|
2023-09-26 12:20:17 -07:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
2022-06-06 10:47:21 -04:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
2023-09-26 12:20:17 -07:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
2017-12-04 04:35:16 -05:00
|
|
|
|
2016-03-15 14:57:19 -07:00
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2021-05-07 15:26:29 -04:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2021-05-07 15:26:29 -04:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2013-10-07 11:29:23 +01:00
|
|
|
|
|
|
|
|
|
2021-05-07 15:26:29 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive
Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as
exclusive, and use that information to make GUP pins reliable and stay
consistent with the page mapped into the page table even if the page table
entry gets write-protected.
With that information at hand, we can extend our COW logic to always reuse
anonymous pages that are exclusive. For anonymous pages that might be
shared, the existing logic applies.
As already documented, PG_anon_exclusive is usually only expressive in
combination with a page table entry. Especially PTE vs. PMD-mapped
anonymous pages require more thought, some examples: due to mremap() we
can easily have a single compound page PTE-mapped into multiple page
tables exclusively in a single process -- multiple page table locks apply.
Further, due to MADV_WIPEONFORK we might not necessarily write-protect
all PTEs, and only some subpages might be pinned. Long story short: once
PTE-mapped, we have to track information about exclusivity per sub-page,
but until then, we can just track it for the compound page in the head
page and not having to update a whole bunch of subpages all of the time
for a simple PMD mapping of a THP.
For simplicity, this commit mostly talks about "anonymous pages", while
it's for THP actually "the part of an anonymous folio referenced via a
page table entry".
To not spill PG_anon_exclusive code all over the mm code-base, we let the
anon rmap code to handle all PG_anon_exclusive logic it can easily handle.
If a writable, present page table entry points at an anonymous (sub)page,
that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably
pin (FOLL_PIN) on an anonymous page references via a present page table
entry, it must only pin if PG_anon_exclusive is set for the mapped
(sub)page.
This commit doesn't adjust GUP, so this is only implicitly handled for
FOLL_WRITE, follow-up commits will teach GUP to also respect it for
FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully
reliable.
Whenever an anonymous page is to be shared (fork(), KSM), or when
temporarily unmapping an anonymous page (swap, migration), the relevant
PG_anon_exclusive bit has to be cleared to mark the anonymous page
possibly shared. Clearing will fail if there are GUP pins on the page:
* For fork(), this means having to copy the page and not being able to
share it. fork() protects against concurrent GUP using the PT lock and
the src_mm->write_protect_seq.
* For KSM, this means sharing will fail. For swap this means, unmapping
will fail, For migration this means, migration will fail early. All
three cases protect against concurrent GUP using the PT lock and a
proper clear/invalidate+flush of the relevant page table entry.
This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a
pinned page gets mapped R/O and the successive write fault ends up
replacing the page instead of reusing it. It improves the situation for
O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if
fork() is *not* involved, however swapout and fork() are still
problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP
users will fix the issue for them.
I. Details about basic handling
I.1. Fresh anonymous pages
page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the
given page exclusive via __page_set_anon_rmap(exclusive=1). As that is
the mechanism fresh anonymous pages come into life (besides migration code
where we copy the page->mapping), all fresh anonymous pages will start out
as exclusive.
I.2. COW reuse handling of anonymous pages
When a COW handler stumbles over a (sub)page that's marked exclusive, it
simply reuses it. Otherwise, the handler tries harder under page lock to
detect if the (sub)page is exclusive and can be reused. If exclusive,
page_move_anon_rmap() will mark the given (sub)page exclusive.
Note that hugetlb code does not yet check for PageAnonExclusive(), as it
still uses the old COW logic that is prone to the COW security issue
because hugetlb code cannot really tolerate unnecessary/wrong COW as huge
pages are a scarce resource.
I.3. Migration handling
try_to_migrate() has to try marking an exclusive anonymous page shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. migrate_vma_collect_pmd() and
__split_huge_pmd_locked() are handled similarly.
Writable migration entries implicitly point at shared anonymous pages.
For readable migration entries that information is stored via a new
"readable-exclusive" migration entry, specific to anonymous pages.
When restoring a migration entry in remove_migration_pte(), information
about exlusivity is detected via the migration entry type, and
RMAP_EXCLUSIVE is set accordingly for
page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information.
I.4. Swapout handling
try_to_unmap() has to try marking the mapped page possibly shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. For now, information about exclusivity is lost. In
the future, we might want to remember that information in the swap entry
in some cases, however, it requires more thought, care, and a way to store
that information in swap entries.
I.5. Swapin handling
do_swap_page() will never stumble over exclusive anonymous pages in the
swap cache, as try_to_migrate() prohibits that. do_swap_page() always has
to detect manually if an anonymous page is exclusive and has to set
RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly.
I.6. THP handling
__split_huge_pmd_locked() has to move the information about exclusivity
from the PMD to the PTEs.
a) In case we have a readable-exclusive PMD migration entry, simply
insert readable-exclusive PTE migration entries.
b) In case we have a present PMD entry and we don't want to freeze
("convert to migration entries"), simply forward PG_anon_exclusive to
all sub-pages, no need to temporarily clear the bit.
c) In case we have a present PMD entry and want to freeze, handle it
similar to try_to_migrate(): try marking the page shared first. In
case we fail, we ignore the "freeze" instruction and simply split
ordinarily. try_to_migrate() will properly fail because the THP is
still mapped via PTEs.
When splitting a compound anonymous folio (THP), the information about
exclusivity is implicitly handled via the migration entries: no need to
replicate PG_anon_exclusive manually.
I.7. fork() handling fork() handling is relatively easy, because
PG_anon_exclusive is only expressive for some page table entry types.
a) Present anonymous pages
page_try_dup_anon_rmap() will mark the given subpage shared -- which will
fail if the page is pinned. If it failed, we have to copy (or PTE-map a
PMD to handle it on the PTE level).
Note that device exclusive entries are just a pointer at a PageAnon()
page. fork() will first convert a device exclusive entry to a present
page table and handle it just like present anonymous pages.
b) Device private entry
Device private entries point at PageAnon() pages that cannot be mapped
directly and, therefore, cannot get pinned.
page_try_dup_anon_rmap() will mark the given subpage shared, which cannot
fail because they cannot get pinned.
c) HW poison entries
PG_anon_exclusive will remain untouched and is stale -- the page table
entry is just a placeholder after all.
d) Migration entries
Writable and readable-exclusive entries are converted to readable entries:
possibly shared.
I.8. mprotect() handling
mprotect() only has to properly handle the new readable-exclusive
migration entry:
When write-protecting a migration entry that points at an anonymous page,
remember the information about exclusivity via the "readable-exclusive"
migration entry type.
II. Migration and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a migration entry, we have to mark the page possibly
shared and synchronize against GUP-fast by a proper clear/invalidate+flush
to make the following scenario impossible:
1. try_to_migrate() places a migration entry after checking for GUP pins
and marks the page possibly shared.
2. GUP-fast pins the page due to lack of synchronization
3. fork() converts the "writable/readable-exclusive" migration entry into a
readable migration entry
4. Migration fails due to the GUP pin (failing to freeze the refcount)
5. Migration entries are restored. PG_anon_exclusive is lost
-> We have a pinned page that is not marked exclusive anymore.
Note that we move information about exclusivity from the page to the
migration entry as it otherwise highly overcomplicates fork() and
PTE-mapping a THP.
III. Swapout and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a swap entry, we have to mark the page possibly shared
and synchronize against GUP-fast by a proper clear/invalidate+flush to
make the following scenario impossible:
1. try_to_unmap() places a swap entry after checking for GUP pins and
clears exclusivity information on the page.
2. GUP-fast pins the page due to lack of synchronization.
-> We have a pinned page that is not marked exclusive anymore.
If we'd ever store information about exclusivity in the swap entry,
similar to migration handling, the same considerations as in II would
apply. This is future work.
Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-09 18:20:44 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-05-07 15:26:29 -04:00
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2021-05-07 07:28:40 -04:00
|
|
|
|
2021-05-07 15:26:29 -04:00
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2021-05-07 15:26:29 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: introduce idle page tracking
Knowing the portion of memory that is not used by a certain application or
memory cgroup (idle memory) can be useful for partitioning the system
efficiently, e.g. by setting memory cgroup limits appropriately.
Currently, the only means to estimate the amount of idle memory provided
by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the
access bit for all pages mapped to a particular process by writing 1 to
clear_refs, wait for some time, and then count smaps:Referenced. However,
this method has two serious shortcomings:
- it does not count unmapped file pages
- it affects the reclaimer logic
To overcome these drawbacks, this patch introduces two new page flags,
Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap.
A page's Idle flag can only be set from userspace by setting bit in
/sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page,
and it is cleared whenever the page is accessed either through page tables
(it is cleared in page_referenced() in this case) or using the read(2)
system call (mark_page_accessed()). Thus by setting the Idle flag for
pages of a particular workload, which can be found e.g. by reading
/proc/PID/pagemap, waiting for some time to let the workload access its
working set, and then reading the bitmap file, one can estimate the amount
of pages that are not used by the workload.
The Young page flag is used to avoid interference with the memory
reclaimer. A page's Young flag is set whenever the Access bit of a page
table entry pointing to the page is cleared by writing to the bitmap file.
If page_referenced() is called on a Young page, it will add 1 to its
return value, therefore concealing the fact that the Access bit was
cleared.
Note, since there is no room for extra page flags on 32 bit, this feature
uses extended page flags when compiled on 32 bit.
[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: kpageidle requires an MMU]
[akpm@linux-foundation.org: decouple from page-flags rework]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09 15:35:45 -07:00
|
|
|
|
2024-09-26 13:06:47 +08:00
|
|
|
|
2013-10-07 11:29:23 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-18 22:08:01 +08:00
|
|
|
|
memory tiering: hot page selection with hint page fault latency
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 16:39:51 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-18 22:08:01 +08:00
|
|
|
|
|
|
|
|
|
memory tiering: hot page selection with hint page fault latency
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 16:39:51 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-18 22:08:01 +08:00
|
|
|
|
2013-10-07 11:29:23 +01:00
|
|
|
|
2021-05-07 15:26:29 -04:00
|
|
|
|
ksm: make KSM page migration possible
KSM page migration is already supported in the case of memory hotremove,
which takes the ksm_thread_mutex across all its migrations to keep life
simple.
But the new KSM NUMA merge_across_nodes knob introduces a problem, when
it's set to non-default 0: if a KSM page is migrated to a different NUMA
node, how do we migrate its stable node to the right tree? And what if
that collides with an existing stable node?
So far there's no provision for that, and this patch does not attempt to
deal with it either. But how will I test a solution, when I don't know
how to hotremove memory? The best answer is to enable KSM page migration
in all cases now, and test more common cases. With THP and compaction
added since KSM came in, page migration is now mainstream, and it's a
shame that a KSM page can frustrate freeing a page block.
Without worrying about merge_across_nodes 0 for now, this patch gets KSM
page migration working reliably for default merge_across_nodes 1 (but
leave the patch enabling it until near the end of the series).
It's much simpler than I'd originally imagined, and does not require an
additional tier of locking: page migration relies on the page lock, KSM
page reclaim relies on the page lock, the page lock is enough for KSM page
migration too.
Almost all the care has to be in get_ksm_page(): that's the function which
worries about when a stable node is stale and should be freed, now it also
has to worry about the KSM page being migrated.
The only new overhead is an additional put/get/lock/unlock_page when
stable_tree_search() arrives at a matching node: to make sure migration
respects the raised page count, and so does not migrate the page while
we're busy with it here. That's probably avoidable, either by changing
internal interfaces from using kpage to stable_node, or by moving the
ksm_migrate_page() callsite into a page_freeze_refs() section (even if not
swapcache); but this works well, I've no urge to pull it apart now.
(Descents of the stable tree may pass through nodes whose KSM pages are
under migration: being unlocked, the raised page count does not prevent
that, nor need it: it's safe to memcmp against either old or new page.)
You might worry about mremap, and whether page migration's rmap_walk to
remove migration entries will find all the KSM locations where it inserted
earlier: that should already be handled, by the satisfyingly heavy hammer
of move_vma()'s call to ksm_madvise(,,,MADV_UNMERGEABLE,).
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Izik Eidus <izik.eidus@ravellosystems.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 16:35:10 -08:00
|
|
|
|
|
|
|
|
|
2024-08-21 20:34:37 +01:00
|
|
|
|
|
|
|
|
|
ksm: make KSM page migration possible
KSM page migration is already supported in the case of memory hotremove,
which takes the ksm_thread_mutex across all its migrations to keep life
simple.
But the new KSM NUMA merge_across_nodes knob introduces a problem, when
it's set to non-default 0: if a KSM page is migrated to a different NUMA
node, how do we migrate its stable node to the right tree? And what if
that collides with an existing stable node?
So far there's no provision for that, and this patch does not attempt to
deal with it either. But how will I test a solution, when I don't know
how to hotremove memory? The best answer is to enable KSM page migration
in all cases now, and test more common cases. With THP and compaction
added since KSM came in, page migration is now mainstream, and it's a
shame that a KSM page can frustrate freeing a page block.
Without worrying about merge_across_nodes 0 for now, this patch gets KSM
page migration working reliably for default merge_across_nodes 1 (but
leave the patch enabling it until near the end of the series).
It's much simpler than I'd originally imagined, and does not require an
additional tier of locking: page migration relies on the page lock, KSM
page reclaim relies on the page lock, the page lock is enough for KSM page
migration too.
Almost all the care has to be in get_ksm_page(): that's the function which
worries about when a stable node is stale and should be freed, now it also
has to worry about the KSM page being migrated.
The only new overhead is an additional put/get/lock/unlock_page when
stable_tree_search() arrives at a matching node: to make sure migration
respects the raised page count, and so does not migrate the page while
we're busy with it here. That's probably avoidable, either by changing
internal interfaces from using kpage to stable_node, or by moving the
ksm_migrate_page() callsite into a page_freeze_refs() section (even if not
swapcache); but this works well, I've no urge to pull it apart now.
(Descents of the stable tree may pass through nodes whose KSM pages are
under migration: being unlocked, the raised page count does not prevent
that, nor need it: it's safe to memcmp against either old or new page.)
You might worry about mremap, and whether page migration's rmap_walk to
remove migration entries will find all the KSM locations where it inserted
earlier: that should already be handled, by the satisfyingly heavy hammer
of move_vma()'s call to ksm_madvise(,,,MADV_UNMERGEABLE,).
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Izik Eidus <izik.eidus@ravellosystems.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 16:35:10 -08:00
|
|
|
|
2021-05-07 15:26:29 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-06-30 18:47:21 -07:00
|
|
|
|
|
|
|
|
|
2021-05-07 15:26:29 -04:00
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-05-07 15:26:29 -04:00
|
|
|
|
|
|
|
|
|
2016-03-15 14:56:15 -07:00
|
|
|
|
2020-04-06 20:04:21 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-05-07 15:26:29 -04:00
|
|
|
|
|
|
|
|
|
2020-04-06 20:04:21 -07:00
|
|
|
|
2021-05-07 15:26:29 -04:00
|
|
|
|
2024-11-29 10:52:13 +08:00
|
|
|
|
2016-03-15 14:57:54 -07:00
|
|
|
|
hugetlb: memcg: account hugetlb-backed memory in memory controller
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-06 11:46:28 -07:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2021-05-07 15:26:29 -04:00
|
|
|
|
2017-09-08 16:12:06 -07:00
|
|
|
|
2006-06-23 02:03:28 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-24 13:28:42 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-09-28 22:01:15 +10:00
|
|
|
|
mm: add folio_expected_ref_count() for reference count calculation
Patch series " JFS: Implement migrate_folio for jfs_metapage_aops" v5.
This patchset addresses a warning that occurs during memory compaction due
to JFS's missing migrate_folio operation. The warning was introduced by
commit 7ee3647243e5 ("migrate: Remove call to ->writepage") which added
explicit warnings when filesystem don't implement migrate_folio.
The syzbot reported following [1]:
jfs_metapage_aops does not implement migrate_folio
WARNING: CPU: 1 PID: 5861 at mm/migrate.c:955 fallback_migrate_folio mm/migrate.c:953 [inline]
WARNING: CPU: 1 PID: 5861 at mm/migrate.c:955 move_to_new_folio+0x70e/0x840 mm/migrate.c:1007
Modules linked in:
CPU: 1 UID: 0 PID: 5861 Comm: syz-executor280 Not tainted 6.15.0-rc1-next-20250411-syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
RIP: 0010:fallback_migrate_folio mm/migrate.c:953 [inline]
RIP: 0010:move_to_new_folio+0x70e/0x840 mm/migrate.c:1007
To fix this issue, this series implement metapage_migrate_folio() for JFS
which handles both single and multiple metapages per page configurations.
While most filesystems leverage existing migration implementations like
filemap_migrate_folio(), buffer_migrate_folio_norefs() or
buffer_migrate_folio() (which internally used folio_expected_refs()),
JFS's metapage architecture requires special handling of its private data
during migration. To support this, this series introduce the
folio_expected_ref_count(), which calculates external references to a
folio from page/swap cache, private data, and page table mappings.
This standardized implementation replaces the previous ad-hoc
folio_expected_refs() function and enables JFS to accurately determine
whether a folio has unexpected references before attempting migration.
Implement folio_expected_ref_count() to calculate expected folio reference
counts from:
- Page/swap cache (1 per page)
- Private data (1)
- Page table mappings (1 per map)
While originally needed for page migration operations, this improved
implementation standardizes reference counting by consolidating all
refcount contributors into a single, reusable function that can benefit
any subsystem needing to detect unexpected references to folios.
The folio_expected_ref_count() returns the sum of these external
references without including any reference the caller itself might hold.
Callers comparing against the actual folio_ref_count() must account for
their own references separately.
Link: https://syzkaller.appspot.com/bug?extid=8bb6fd945af4e0ad9299 [1]
Link: https://lkml.kernel.org/r/20250430100150.279751-1-shivankg@amd.com
Link: https://lkml.kernel.org/r/20250430100150.279751-2-shivankg@amd.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Co-developed-by: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-04-30 10:01:51 +00:00
|
|
|
|
2022-09-28 22:01:15 +10:00
|
|
|
|
mm: migrate: support poisoned recover from migrate folio
The folio migration is widely used in kernel, memory compaction, memory
hotplug, soft offline page, numa balance, memory demote/promotion, etc,
but once access a poisoned source folio when migrating, the kerenl will
panic.
There is a mechanism in the kernel to recover from uncorrectable memory
errors, ARCH_HAS_COPY_MC, which is already used in other core-mm paths,
eg, CoW, khugepaged, coredump, ksm copy, see copy_mc_to_{user,kernel},
copy_mc_{user_}highpage callers.
In order to support poisoned folio copy recover from migrate folio, we
chose to make folio migration tolerant of memory failures and return error
for folio migration, because folio migration is no guarantee of success,
this could avoid the similar panic shown below.
CPU: 1 PID: 88343 Comm: test_softofflin Kdump: loaded Not tainted 6.6.0
pc : copy_page+0x10/0xc0
lr : copy_highpage+0x38/0x50
...
Call trace:
copy_page+0x10/0xc0
folio_copy+0x78/0x90
migrate_folio_extra+0x54/0xa0
move_to_new_folio+0xd8/0x1f0
migrate_folio_move+0xb8/0x300
migrate_pages_batch+0x528/0x788
migrate_pages_sync+0x8c/0x258
migrate_pages+0x440/0x528
soft_offline_in_use_page+0x2ec/0x3c0
soft_offline_page+0x238/0x310
soft_offline_page_store+0x6c/0xc0
dev_attr_store+0x20/0x40
sysfs_kf_write+0x4c/0x68
kernfs_fop_write_iter+0x130/0x1c8
new_sync_write+0xa4/0x138
vfs_write+0x238/0x2d8
ksys_write+0x74/0x110
Note, folio copy is moved in the begin of the __migrate_folio(), which
could simplify the error handling since there is no turning back if
folio_migrate_mapping() return success, the downside is the folio copied
even though folio_migrate_mapping() return fail, an optimization is to
check whether source folio does not have extra refs before we do folio
copy.
Link: https://lkml.kernel.org/r/20240626085328.608006-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-26 16:53:26 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-09-28 22:01:15 +10:00
|
|
|
|
mm: migrate: support poisoned recover from migrate folio
The folio migration is widely used in kernel, memory compaction, memory
hotplug, soft offline page, numa balance, memory demote/promotion, etc,
but once access a poisoned source folio when migrating, the kerenl will
panic.
There is a mechanism in the kernel to recover from uncorrectable memory
errors, ARCH_HAS_COPY_MC, which is already used in other core-mm paths,
eg, CoW, khugepaged, coredump, ksm copy, see copy_mc_to_{user,kernel},
copy_mc_{user_}highpage callers.
In order to support poisoned folio copy recover from migrate folio, we
chose to make folio migration tolerant of memory failures and return error
for folio migration, because folio migration is no guarantee of success,
this could avoid the similar panic shown below.
CPU: 1 PID: 88343 Comm: test_softofflin Kdump: loaded Not tainted 6.6.0
pc : copy_page+0x10/0xc0
lr : copy_highpage+0x38/0x50
...
Call trace:
copy_page+0x10/0xc0
folio_copy+0x78/0x90
migrate_folio_extra+0x54/0xa0
move_to_new_folio+0xd8/0x1f0
migrate_folio_move+0xb8/0x300
migrate_pages_batch+0x528/0x788
migrate_pages_sync+0x8c/0x258
migrate_pages+0x440/0x528
soft_offline_in_use_page+0x2ec/0x3c0
soft_offline_page+0x238/0x310
soft_offline_page_store+0x6c/0xc0
dev_attr_store+0x20/0x40
sysfs_kf_write+0x4c/0x68
kernfs_fop_write_iter+0x130/0x1c8
new_sync_write+0xa4/0x138
vfs_write+0x238/0x2d8
ksys_write+0x74/0x110
Note, folio copy is moved in the begin of the __migrate_folio(), which
could simplify the error handling since there is no turning back if
folio_migrate_mapping() return success, the downside is the folio copied
even though folio_migrate_mapping() return fail, an optimization is to
check whether source folio does not have extra refs before we do folio
copy.
Link: https://lkml.kernel.org/r/20240626085328.608006-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-26 16:53:26 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-09-28 22:01:15 +10:00
|
|
|
|
mm: migrate: support poisoned recover from migrate folio
The folio migration is widely used in kernel, memory compaction, memory
hotplug, soft offline page, numa balance, memory demote/promotion, etc,
but once access a poisoned source folio when migrating, the kerenl will
panic.
There is a mechanism in the kernel to recover from uncorrectable memory
errors, ARCH_HAS_COPY_MC, which is already used in other core-mm paths,
eg, CoW, khugepaged, coredump, ksm copy, see copy_mc_to_{user,kernel},
copy_mc_{user_}highpage callers.
In order to support poisoned folio copy recover from migrate folio, we
chose to make folio migration tolerant of memory failures and return error
for folio migration, because folio migration is no guarantee of success,
this could avoid the similar panic shown below.
CPU: 1 PID: 88343 Comm: test_softofflin Kdump: loaded Not tainted 6.6.0
pc : copy_page+0x10/0xc0
lr : copy_highpage+0x38/0x50
...
Call trace:
copy_page+0x10/0xc0
folio_copy+0x78/0x90
migrate_folio_extra+0x54/0xa0
move_to_new_folio+0xd8/0x1f0
migrate_folio_move+0xb8/0x300
migrate_pages_batch+0x528/0x788
migrate_pages_sync+0x8c/0x258
migrate_pages+0x440/0x528
soft_offline_in_use_page+0x2ec/0x3c0
soft_offline_page+0x238/0x310
soft_offline_page_store+0x6c/0xc0
dev_attr_store+0x20/0x40
sysfs_kf_write+0x4c/0x68
kernfs_fop_write_iter+0x130/0x1c8
new_sync_write+0xa4/0x138
vfs_write+0x238/0x2d8
ksys_write+0x74/0x110
Note, folio copy is moved in the begin of the __migrate_folio(), which
could simplify the error handling since there is no turning back if
folio_migrate_mapping() return success, the downside is the folio copied
even though folio_migrate_mapping() return fail, an optimization is to
check whether source folio does not have extra refs before we do folio
copy.
Link: https://lkml.kernel.org/r/20240626085328.608006-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-26 16:53:26 +08:00
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2022-09-28 22:01:15 +10:00
|
|
|
|
|
|
|
|
|
2024-05-24 13:28:42 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: migrate: support poisoned recover from migrate folio
The folio migration is widely used in kernel, memory compaction, memory
hotplug, soft offline page, numa balance, memory demote/promotion, etc,
but once access a poisoned source folio when migrating, the kerenl will
panic.
There is a mechanism in the kernel to recover from uncorrectable memory
errors, ARCH_HAS_COPY_MC, which is already used in other core-mm paths,
eg, CoW, khugepaged, coredump, ksm copy, see copy_mc_to_{user,kernel},
copy_mc_{user_}highpage callers.
In order to support poisoned folio copy recover from migrate folio, we
chose to make folio migration tolerant of memory failures and return error
for folio migration, because folio migration is no guarantee of success,
this could avoid the similar panic shown below.
CPU: 1 PID: 88343 Comm: test_softofflin Kdump: loaded Not tainted 6.6.0
pc : copy_page+0x10/0xc0
lr : copy_highpage+0x38/0x50
...
Call trace:
copy_page+0x10/0xc0
folio_copy+0x78/0x90
migrate_folio_extra+0x54/0xa0
move_to_new_folio+0xd8/0x1f0
migrate_folio_move+0xb8/0x300
migrate_pages_batch+0x528/0x788
migrate_pages_sync+0x8c/0x258
migrate_pages+0x440/0x528
soft_offline_in_use_page+0x2ec/0x3c0
soft_offline_page+0x238/0x310
soft_offline_page_store+0x6c/0xc0
dev_attr_store+0x20/0x40
sysfs_kf_write+0x4c/0x68
kernfs_fop_write_iter+0x130/0x1c8
new_sync_write+0xa4/0x138
vfs_write+0x238/0x2d8
ksys_write+0x74/0x110
Note, folio copy is moved in the begin of the __migrate_folio(), which
could simplify the error handling since there is no turning back if
folio_migrate_mapping() return success, the downside is the folio copied
even though folio_migrate_mapping() return fail, an optimization is to
check whether source folio does not have extra refs before we do folio
copy.
Link: https://lkml.kernel.org/r/20240626085328.608006-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-26 16:53:26 +08:00
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2022-09-28 22:01:15 +10:00
|
|
|
|
|
|
|
|
|
2022-06-06 10:27:41 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-10-02 05:01:08 +01:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2022-06-06 10:27:41 -04:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2022-06-06 10:27:41 -04:00
|
|
|
|
2024-05-24 13:28:42 +08:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2024-05-24 13:28:42 +08:00
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2022-06-06 10:27:41 -04:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2023-08-01 19:22:01 +02:00
|
|
|
|
2018-12-28 00:39:09 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-04-28 13:54:38 -07:00
|
|
|
|
2018-12-28 00:39:09 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-04-28 13:54:38 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-28 00:39:09 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-04-28 13:54:38 -07:00
|
|
|
|
2018-12-28 00:39:09 -08:00
|
|
|
|
2023-04-28 13:54:38 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-28 00:39:09 -08:00
|
|
|
|
|
|
|
|
|
2022-06-06 10:20:31 -04:00
|
|
|
|
|
|
|
|
|
2018-12-28 00:39:12 -08:00
|
|
|
|
2006-06-23 02:03:28 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-28 00:39:05 -08:00
|
|
|
|
2006-06-23 02:03:28 -07:00
|
|
|
|
2022-06-06 10:20:31 -04:00
|
|
|
|
|
|
|
|
|
2022-06-06 10:27:41 -04:00
|
|
|
|
2006-06-23 02:03:28 -07:00
|
|
|
|
2018-12-28 00:39:05 -08:00
|
|
|
|
mm: add folio_expected_ref_count() for reference count calculation
Patch series " JFS: Implement migrate_folio for jfs_metapage_aops" v5.
This patchset addresses a warning that occurs during memory compaction due
to JFS's missing migrate_folio operation. The warning was introduced by
commit 7ee3647243e5 ("migrate: Remove call to ->writepage") which added
explicit warnings when filesystem don't implement migrate_folio.
The syzbot reported following [1]:
jfs_metapage_aops does not implement migrate_folio
WARNING: CPU: 1 PID: 5861 at mm/migrate.c:955 fallback_migrate_folio mm/migrate.c:953 [inline]
WARNING: CPU: 1 PID: 5861 at mm/migrate.c:955 move_to_new_folio+0x70e/0x840 mm/migrate.c:1007
Modules linked in:
CPU: 1 UID: 0 PID: 5861 Comm: syz-executor280 Not tainted 6.15.0-rc1-next-20250411-syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
RIP: 0010:fallback_migrate_folio mm/migrate.c:953 [inline]
RIP: 0010:move_to_new_folio+0x70e/0x840 mm/migrate.c:1007
To fix this issue, this series implement metapage_migrate_folio() for JFS
which handles both single and multiple metapages per page configurations.
While most filesystems leverage existing migration implementations like
filemap_migrate_folio(), buffer_migrate_folio_norefs() or
buffer_migrate_folio() (which internally used folio_expected_refs()),
JFS's metapage architecture requires special handling of its private data
during migration. To support this, this series introduce the
folio_expected_ref_count(), which calculates external references to a
folio from page/swap cache, private data, and page table mappings.
This standardized implementation replaces the previous ad-hoc
folio_expected_refs() function and enables JFS to accurately determine
whether a folio has unexpected references before attempting migration.
Implement folio_expected_ref_count() to calculate expected folio reference
counts from:
- Page/swap cache (1 per page)
- Private data (1)
- Page table mappings (1 per map)
While originally needed for page migration operations, this improved
implementation standardizes reference counting by consolidating all
refcount contributors into a single, reusable function that can benefit
any subsystem needing to detect unexpected references to folios.
The folio_expected_ref_count() returns the sum of these external
references without including any reference the caller itself might hold.
Callers comparing against the actual folio_ref_count() must account for
their own references separately.
Link: https://syzkaller.appspot.com/bug?extid=8bb6fd945af4e0ad9299 [1]
Link: https://lkml.kernel.org/r/20250430100150.279751-1-shivankg@amd.com
Link: https://lkml.kernel.org/r/20250430100150.279751-2-shivankg@amd.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Co-developed-by: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-04-30 10:01:51 +00:00
|
|
|
|
2022-06-06 10:20:31 -04:00
|
|
|
|
2018-12-28 00:39:05 -08:00
|
|
|
|
2006-06-23 02:03:28 -07:00
|
|
|
|
2018-12-28 00:39:05 -08:00
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:28 -07:00
|
|
|
|
2018-12-28 00:39:12 -08:00
|
|
|
|
2025-04-17 18:59:21 -07:00
|
|
|
|
2018-12-28 00:39:12 -08:00
|
|
|
|
|
|
|
|
|
2025-04-17 18:59:21 -07:00
|
|
|
|
|
|
|
|
|
2018-12-28 00:39:12 -08:00
|
|
|
|
|
|
|
|
|
2023-11-17 21:58:23 +00:00
|
|
|
|
2018-12-28 00:39:12 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-04-17 18:59:21 -07:00
|
|
|
|
2018-12-28 00:39:12 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-24 13:28:39 +08:00
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2018-12-28 00:39:05 -08:00
|
|
|
|
2006-06-23 02:03:28 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-07-13 04:55:09 +01:00
|
|
|
|
2006-06-23 02:03:28 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-28 00:39:05 -08:00
|
|
|
|
2019-08-02 21:48:47 -07:00
|
|
|
|
2025-04-17 18:59:21 -07:00
|
|
|
|
2006-06-23 02:03:28 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-28 00:39:05 -08:00
|
|
|
|
2006-06-23 02:03:28 -07:00
|
|
|
|
2018-12-28 00:39:12 -08:00
|
|
|
|
2022-06-06 10:20:31 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-28 00:39:12 -08:00
|
|
|
|
2022-06-06 10:20:31 -04:00
|
|
|
|
|
|
|
|
|
2018-12-28 00:39:12 -08:00
|
|
|
|
2022-06-06 10:20:31 -04:00
|
|
|
|
2018-12-28 00:39:12 -08:00
|
|
|
|
2022-06-06 10:20:31 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-28 00:39:12 -08:00
|
|
|
|
2022-06-06 10:20:31 -04:00
|
|
|
|
|
|
|
|
|
2018-12-28 00:39:12 -08:00
|
|
|
|
2022-06-06 10:20:31 -04:00
|
|
|
|
2018-12-28 00:39:12 -08:00
|
|
|
|
2022-12-07 12:27:14 +01:00
|
|
|
|
2023-08-01 19:22:01 +02:00
|
|
|
|
2006-06-23 02:03:28 -07:00
|
|
|
|
2022-06-06 12:55:08 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-24 13:28:42 +08:00
|
|
|
|
2022-06-06 12:55:08 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:38 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-06-06 09:34:36 -04:00
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:38 -07:00
|
|
|
|
2025-04-02 15:59:57 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:33 -07:00
|
|
|
|
|
|
|
|
|
2025-04-02 15:59:57 +01:00
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:33 -07:00
|
|
|
|
mm: merge folio_has_private()/filemap_release_folio() call pairs
Patch series "mm, netfs, fscache: Stop read optimisation when folio
removed from pagecache", v7.
This fixes an optimisation in fscache whereby we don't read from the cache
for a particular file until we know that there's data there that we don't
have in the pagecache. The problem is that I'm no longer using PG_fscache
(aka PG_private_2) to indicate that the page is cached and so I don't get
a notification when a cached page is dropped from the pagecache.
The first patch merges some folio_has_private() and
filemap_release_folio() pairs and introduces a helper,
folio_needs_release(), to indicate if a release is required.
The second patch is the actual fix. Following Willy's suggestions[1], it
adds an AS_RELEASE_ALWAYS flag to an address_space that will make
filemap_release_folio() always call ->release_folio(), even if
PG_private/PG_private_2 aren't set. folio_needs_release() is altered to
add a check for this.
This patch (of 2):
Make filemap_release_folio() check folio_has_private(). Then, in most
cases, where a call to folio_has_private() is immediately followed by a
call to filemap_release_folio(), we can get rid of the test in the pair.
There are a couple of sites in mm/vscan.c that this can't so easily be
done. In shrink_folio_list(), there are actually three cases (something
different is done for incompletely invalidated buffers), but
filemap_release_folio() elides two of them.
In shrink_active_list(), we don't have have the folio lock yet, so the
check allows us to avoid locking the page unnecessarily.
A wrapper function to check if a folio needs release is provided for those
places that still need to do it in the mm/ directory. This will acquire
additional parts to the condition in a future patch.
After this, the only remaining caller of folio_has_private() outside of
mm/ is a check in fuse.
Link: https://lkml.kernel.org/r/20230628104852.3391651-1-dhowells@redhat.com
Link: https://lkml.kernel.org/r/20230628104852.3391651-2-dhowells@redhat.com
Reported-by: Rohith Surabattula <rohiths.msft@gmail.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steve French <sfrench@samba.org>
Cc: Shyam Prasad N <nspmangalore@gmail.com>
Cc: Rohith Surabattula <rohiths.msft@gmail.com>
Cc: Dave Wysochanski <dwysocha@redhat.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-28 11:48:51 +01:00
|
|
|
|
2019-03-05 15:44:43 -08:00
|
|
|
|
2006-06-23 02:03:33 -07:00
|
|
|
|
2022-06-06 10:27:41 -04:00
|
|
|
|
2006-06-23 02:03:33 -07:00
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2025-07-04 12:25:05 +02:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2025-07-04 12:25:05 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unevictable LRU Infrastructure
When the system contains lots of mlocked or otherwise unevictable pages,
the pageout code (kswapd) can spend lots of time scanning over these
pages. Worse still, the presence of lots of unevictable pages can confuse
kswapd into thinking that more aggressive pageout modes are required,
resulting in all kinds of bad behaviour.
Infrastructure to manage pages excluded from reclaim--i.e., hidden from
vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to
maintain "unevictable" pages on a separate per-zone LRU list, to "hide"
them from vmscan.
Kosaki Motohiro added the support for the memory controller unevictable
lru list.
Pages on the unevictable list have both PG_unevictable and PG_lru set.
Thus, PG_unevictable is analogous to and mutually exclusive with
PG_active--it specifies which LRU list the page is on.
The unevictable infrastructure is enabled by a new mm Kconfig option
[CONFIG_]UNEVICTABLE_LRU.
A new function 'page_evictable(page, vma)' in vmscan.c tests whether or
not a page may be evictable. Subsequent patches will add the various
!evictable tests. We'll want to keep these tests light-weight for use in
shrink_active_list() and, possibly, the fault path.
To avoid races between tasks putting pages [back] onto an LRU list and
tasks that might be moving the page from non-evictable to evictable state,
the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()'
-- tests the "evictability" of a page after placing it on the LRU, before
dropping the reference. If the page has become unevictable,
putback_lru_page() will redo the 'putback', thus moving the page to the
unevictable list. This way, we avoid "stranding" evictable pages on the
unevictable list.
[akpm@linux-foundation.org: fix fallout from out-of-order merge]
[riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build]
[nishimura@mxp.nes.nec.co.jp: remove redundant mapping check]
[kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework]
[kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c]
[kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure]
[kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch]
[kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-18 20:26:39 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2022-05-12 20:23:05 -07:00
|
|
|
|
2015-11-05 18:49:53 -08:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2025-07-04 12:25:05 +02:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2022-05-12 20:23:05 -07:00
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2025-07-04 12:25:05 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-06-07 15:38:48 -04:00
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
2025-07-04 12:25:03 +02:00
|
|
|
|
|
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
2025-07-04 12:25:03 +02:00
|
|
|
|
2022-05-12 20:23:05 -07:00
|
|
|
|
2019-03-28 20:44:28 -07:00
|
|
|
|
2022-05-12 20:23:05 -07:00
|
|
|
|
|
|
|
|
|
2010-05-24 14:32:20 -07:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
mm: migrate: fix getting incorrect page mapping during page migration
When running stress-ng testing, we found below kernel crash after a few hours:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : dentry_name+0xd8/0x224
lr : pointer+0x22c/0x370
sp : ffff800025f134c0
......
Call trace:
dentry_name+0xd8/0x224
pointer+0x22c/0x370
vsnprintf+0x1ec/0x730
vscnprintf+0x2c/0x60
vprintk_store+0x70/0x234
vprintk_emit+0xe0/0x24c
vprintk_default+0x3c/0x44
vprintk_func+0x84/0x2d0
printk+0x64/0x88
__dump_page+0x52c/0x530
dump_page+0x14/0x20
set_migratetype_isolate+0x110/0x224
start_isolate_page_range+0xc4/0x20c
offline_pages+0x124/0x474
memory_block_offline+0x44/0xf4
memory_subsys_offline+0x3c/0x70
device_offline+0xf0/0x120
......
After analyzing the vmcore, I found this issue is caused by page migration.
The scenario is that, one thread is doing page migration, and we will use the
target page's ->mapping field to save 'anon_vma' pointer between page unmap and
page move, and now the target page is locked and refcount is 1.
Currently, there is another stress-ng thread performing memory hotplug,
attempting to offline the target page that is being migrated. It discovers that
the refcount of this target page is 1, preventing the offline operation, thus
proceeding to dump the page. However, page_mapping() of the target page may
return an incorrect file mapping to crash the system in dump_mapping(), since
the target page->mapping only saves 'anon_vma' pointer without setting
PAGE_MAPPING_ANON flag.
There are seveval ways to fix this issue:
(1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving
'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target
page has not built mappings yet.
(2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing
the system, however, there are still some PFN walkers that call page_mapping()
without holding the page lock, such as compaction.
(3) Using target page->private field to save the 'anon_vma' pointer and 2 bits
page state, just as page->mapping records an anonymous page, which can remove
the page_mapping() impact for PFN walkers and also seems a simple way.
So I choose option 3 to fix this issue, and this can also fix other potential
issues for PFN walkers, such as compaction.
Link: https://lkml.kernel.org/r/e60b17a88afc38cb32f84c3e30837ec70b343d2b.1702641709.git.baolin.wang@linux.alibaba.com
Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-15 20:07:52 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: migrate: fix getting incorrect page mapping during page migration
When running stress-ng testing, we found below kernel crash after a few hours:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : dentry_name+0xd8/0x224
lr : pointer+0x22c/0x370
sp : ffff800025f134c0
......
Call trace:
dentry_name+0xd8/0x224
pointer+0x22c/0x370
vsnprintf+0x1ec/0x730
vscnprintf+0x2c/0x60
vprintk_store+0x70/0x234
vprintk_emit+0xe0/0x24c
vprintk_default+0x3c/0x44
vprintk_func+0x84/0x2d0
printk+0x64/0x88
__dump_page+0x52c/0x530
dump_page+0x14/0x20
set_migratetype_isolate+0x110/0x224
start_isolate_page_range+0xc4/0x20c
offline_pages+0x124/0x474
memory_block_offline+0x44/0xf4
memory_subsys_offline+0x3c/0x70
device_offline+0xf0/0x120
......
After analyzing the vmcore, I found this issue is caused by page migration.
The scenario is that, one thread is doing page migration, and we will use the
target page's ->mapping field to save 'anon_vma' pointer between page unmap and
page move, and now the target page is locked and refcount is 1.
Currently, there is another stress-ng thread performing memory hotplug,
attempting to offline the target page that is being migrated. It discovers that
the refcount of this target page is 1, preventing the offline operation, thus
proceeding to dump the page. However, page_mapping() of the target page may
return an incorrect file mapping to crash the system in dump_mapping(), since
the target page->mapping only saves 'anon_vma' pointer without setting
PAGE_MAPPING_ANON flag.
There are seveval ways to fix this issue:
(1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving
'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target
page has not built mappings yet.
(2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing
the system, however, there are still some PFN walkers that call page_mapping()
without holding the page lock, such as compaction.
(3) Using target page->private field to save the 'anon_vma' pointer and 2 bits
page state, just as page->mapping records an anonymous page, which can remove
the page_mapping() impact for PFN walkers and also seems a simple way.
So I choose option 3 to fix this issue, and this can also fix other potential
issues for PFN walkers, such as compaction.
Link: https://lkml.kernel.org/r/e60b17a88afc38cb32f84c3e30837ec70b343d2b.1702641709.git.baolin.wang@linux.alibaba.com
Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-15 20:07:52 +08:00
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
mm: migrate: fix getting incorrect page mapping during page migration
When running stress-ng testing, we found below kernel crash after a few hours:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : dentry_name+0xd8/0x224
lr : pointer+0x22c/0x370
sp : ffff800025f134c0
......
Call trace:
dentry_name+0xd8/0x224
pointer+0x22c/0x370
vsnprintf+0x1ec/0x730
vscnprintf+0x2c/0x60
vprintk_store+0x70/0x234
vprintk_emit+0xe0/0x24c
vprintk_default+0x3c/0x44
vprintk_func+0x84/0x2d0
printk+0x64/0x88
__dump_page+0x52c/0x530
dump_page+0x14/0x20
set_migratetype_isolate+0x110/0x224
start_isolate_page_range+0xc4/0x20c
offline_pages+0x124/0x474
memory_block_offline+0x44/0xf4
memory_subsys_offline+0x3c/0x70
device_offline+0xf0/0x120
......
After analyzing the vmcore, I found this issue is caused by page migration.
The scenario is that, one thread is doing page migration, and we will use the
target page's ->mapping field to save 'anon_vma' pointer between page unmap and
page move, and now the target page is locked and refcount is 1.
Currently, there is another stress-ng thread performing memory hotplug,
attempting to offline the target page that is being migrated. It discovers that
the refcount of this target page is 1, preventing the offline operation, thus
proceeding to dump the page. However, page_mapping() of the target page may
return an incorrect file mapping to crash the system in dump_mapping(), since
the target page->mapping only saves 'anon_vma' pointer without setting
PAGE_MAPPING_ANON flag.
There are seveval ways to fix this issue:
(1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving
'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target
page has not built mappings yet.
(2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing
the system, however, there are still some PFN walkers that call page_mapping()
without holding the page lock, such as compaction.
(3) Using target page->private field to save the 'anon_vma' pointer and 2 bits
page state, just as page->mapping records an anonymous page, which can remove
the page_mapping() impact for PFN walkers and also seems a simple way.
So I choose option 3 to fix this issue, and this can also fix other potential
issues for PFN walkers, such as compaction.
Link: https://lkml.kernel.org/r/e60b17a88afc38cb32f84c3e30837ec70b343d2b.1702641709.git.baolin.wang@linux.alibaba.com
Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-15 20:07:52 +08:00
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
|
|
|
|
|
mm: migrate: fix getting incorrect page mapping during page migration
When running stress-ng testing, we found below kernel crash after a few hours:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : dentry_name+0xd8/0x224
lr : pointer+0x22c/0x370
sp : ffff800025f134c0
......
Call trace:
dentry_name+0xd8/0x224
pointer+0x22c/0x370
vsnprintf+0x1ec/0x730
vscnprintf+0x2c/0x60
vprintk_store+0x70/0x234
vprintk_emit+0xe0/0x24c
vprintk_default+0x3c/0x44
vprintk_func+0x84/0x2d0
printk+0x64/0x88
__dump_page+0x52c/0x530
dump_page+0x14/0x20
set_migratetype_isolate+0x110/0x224
start_isolate_page_range+0xc4/0x20c
offline_pages+0x124/0x474
memory_block_offline+0x44/0xf4
memory_subsys_offline+0x3c/0x70
device_offline+0xf0/0x120
......
After analyzing the vmcore, I found this issue is caused by page migration.
The scenario is that, one thread is doing page migration, and we will use the
target page's ->mapping field to save 'anon_vma' pointer between page unmap and
page move, and now the target page is locked and refcount is 1.
Currently, there is another stress-ng thread performing memory hotplug,
attempting to offline the target page that is being migrated. It discovers that
the refcount of this target page is 1, preventing the offline operation, thus
proceeding to dump the page. However, page_mapping() of the target page may
return an incorrect file mapping to crash the system in dump_mapping(), since
the target page->mapping only saves 'anon_vma' pointer without setting
PAGE_MAPPING_ANON flag.
There are seveval ways to fix this issue:
(1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving
'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target
page has not built mappings yet.
(2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing
the system, however, there are still some PFN walkers that call page_mapping()
without holding the page lock, such as compaction.
(3) Using target page->private field to save the 'anon_vma' pointer and 2 bits
page state, just as page->mapping records an anonymous page, which can remove
the page_mapping() impact for PFN walkers and also seems a simple way.
So I choose option 3 to fix this issue, and this can also fix other potential
issues for PFN walkers, such as compaction.
Link: https://lkml.kernel.org/r/e60b17a88afc38cb32f84c3e30837ec70b343d2b.1702641709.git.baolin.wang@linux.alibaba.com
Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-15 20:07:52 +08:00
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
|
|
|
|
|
mm: migrate: fix getting incorrect page mapping during page migration
When running stress-ng testing, we found below kernel crash after a few hours:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : dentry_name+0xd8/0x224
lr : pointer+0x22c/0x370
sp : ffff800025f134c0
......
Call trace:
dentry_name+0xd8/0x224
pointer+0x22c/0x370
vsnprintf+0x1ec/0x730
vscnprintf+0x2c/0x60
vprintk_store+0x70/0x234
vprintk_emit+0xe0/0x24c
vprintk_default+0x3c/0x44
vprintk_func+0x84/0x2d0
printk+0x64/0x88
__dump_page+0x52c/0x530
dump_page+0x14/0x20
set_migratetype_isolate+0x110/0x224
start_isolate_page_range+0xc4/0x20c
offline_pages+0x124/0x474
memory_block_offline+0x44/0xf4
memory_subsys_offline+0x3c/0x70
device_offline+0xf0/0x120
......
After analyzing the vmcore, I found this issue is caused by page migration.
The scenario is that, one thread is doing page migration, and we will use the
target page's ->mapping field to save 'anon_vma' pointer between page unmap and
page move, and now the target page is locked and refcount is 1.
Currently, there is another stress-ng thread performing memory hotplug,
attempting to offline the target page that is being migrated. It discovers that
the refcount of this target page is 1, preventing the offline operation, thus
proceeding to dump the page. However, page_mapping() of the target page may
return an incorrect file mapping to crash the system in dump_mapping(), since
the target page->mapping only saves 'anon_vma' pointer without setting
PAGE_MAPPING_ANON flag.
There are seveval ways to fix this issue:
(1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving
'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target
page has not built mappings yet.
(2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing
the system, however, there are still some PFN walkers that call page_mapping()
without holding the page lock, such as compaction.
(3) Using target page->private field to save the 'anon_vma' pointer and 2 bits
page state, just as page->mapping records an anonymous page, which can remove
the page_mapping() impact for PFN walkers and also seems a simple way.
So I choose option 3 to fix this issue, and this can also fix other potential
issues for PFN walkers, such as compaction.
Link: https://lkml.kernel.org/r/e60b17a88afc38cb32f84c3e30837ec70b343d2b.1702641709.git.baolin.wang@linux.alibaba.com
Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-15 20:07:52 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-04 12:25:12 +02:00
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-08-11 16:39:47 +02:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
2011-10-31 17:06:57 -07:00
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
mm: migration: take a reference to the anon_vma before migrating
This patchset is a memory compaction mechanism that reduces external
fragmentation memory by moving GFP_MOVABLE pages to a fewer number of
pageblocks. The term "compaction" was chosen as there are is a number of
mechanisms that are not mutually exclusive that can be used to defragment
memory. For example, lumpy reclaim is a form of defragmentation as was
slub "defragmentation" (really a form of targeted reclaim). Hence, this
is called "compaction" to distinguish it from other forms of
defragmentation.
In this implementation, a full compaction run involves two scanners
operating within a zone - a migration and a free scanner. The migration
scanner starts at the beginning of a zone and finds all movable pages
within one pageblock_nr_pages-sized area and isolates them on a
migratepages list. The free scanner begins at the end of the zone and
searches on a per-area basis for enough free pages to migrate all the
pages on the migratepages list. As each area is respectively migrated or
exhausted of free pages, the scanners are advanced one area. A compaction
run completes within a zone when the two scanners meet.
This method is a bit primitive but is easy to understand and greater
sophistication would require maintenance of counters on a per-pageblock
basis. This would have a big impact on allocator fast-paths to improve
compaction which is a poor trade-off.
It also does not try relocate virtually contiguous pages to be physically
contiguous. However, assuming transparent hugepages were in use, a
hypothetical khugepaged might reuse compaction code to isolate free pages,
split them and relocate userspace pages for promotion.
Memory compaction can be triggered in one of three ways. It may be
triggered explicitly by writing any value to /proc/sys/vm/compact_memory
and compacting all of memory. It can be triggered on a per-node basis by
writing any value to /sys/devices/system/node/nodeN/compact where N is the
node ID to be compacted. When a process fails to allocate a high-order
page, it may compact memory in an attempt to satisfy the allocation
instead of entering direct reclaim. Explicit compaction does not finish
until the two scanners meet and direct compaction ends if a suitable page
becomes available that would meet watermarks.
The series is in 14 patches. The first three are not "core" to the series
but are important pre-requisites.
Patch 1 reference counts anon_vma for rmap_walk_anon(). Without this
patch, it's possible to use anon_vma after free if the caller is
not holding a VMA or mmap_sem for the pages in question. While
there should be no existing user that causes this problem,
it's a requirement for memory compaction to be stable. The patch
is at the start of the series for bisection reasons.
Patch 2 merges the KSM and migrate counts. It could be merged with patch 1
but would be slightly harder to review.
Patch 3 skips over unmapped anon pages during migration as there are no
guarantees about the anon_vma existing. There is a window between
when a page was isolated and migration started during which anon_vma
could disappear.
Patch 4 notes that PageSwapCache pages can still be migrated even if they
are unmapped.
Patch 5 allows CONFIG_MIGRATION to be set without CONFIG_NUMA
Patch 6 exports a "unusable free space index" via debugfs. It's
a measure of external fragmentation that takes the size of the
allocation request into account. It can also be calculated from
userspace so can be dropped if requested
Patch 7 exports a "fragmentation index" which only has meaning when an
allocation request fails. It determines if an allocation failure
would be due to a lack of memory or external fragmentation.
Patch 8 moves the definition for LRU isolation modes for use by compaction
Patch 9 is the compaction mechanism although it's unreachable at this point
Patch 10 adds a means of compacting all of memory with a proc trgger
Patch 11 adds a means of compacting a specific node with a sysfs trigger
Patch 12 adds "direct compaction" before "direct reclaim" if it is
determined there is a good chance of success.
Patch 13 adds a sysctl that allows tuning of the threshold at which the
kernel will compact or direct reclaim
Patch 14 temporarily disables compaction if an allocation failure occurs
after compaction.
Testing of compaction was in three stages. For the test, debugging,
preempt, the sleep watchdog and lockdep were all enabled but nothing nasty
popped out. min_free_kbytes was tuned as recommended by hugeadm to help
fragmentation avoidance and high-order allocations. It was tested on X86,
X86-64 and PPC64.
Ths first test represents one of the easiest cases that can be faced for
lumpy reclaim or memory compaction.
1. Machine freshly booted and configured for hugepage usage with
a) hugeadm --create-global-mounts
b) hugeadm --pool-pages-max DEFAULT:8G
c) hugeadm --set-recommended-min_free_kbytes
d) hugeadm --set-recommended-shmmax
The min_free_kbytes here is important. Anti-fragmentation works best
when pageblocks don't mix. hugeadm knows how to calculate a value that
will significantly reduce the worst of external-fragmentation-related
events as reported by the mm_page_alloc_extfrag tracepoint.
2. Load up memory
a) Start updatedb
b) Create in parallel a X files of pagesize*128 in size. Wait
until files are created. By parallel, I mean that 4096 instances
of dd were launched, one after the other using &. The crude
objective being to mix filesystem metadata allocations with
the buffer cache.
c) Delete every second file so that pageblocks are likely to
have holes
d) kill updatedb if it's still running
At this point, the system is quiet, memory is full but it's full with
clean filesystem metadata and clean buffer cache that is unmapped.
This is readily migrated or discarded so you'd expect lumpy reclaim
to have no significant advantage over compaction but this is at
the POC stage.
3. In increments, attempt to allocate 5% of memory as hugepages.
Measure how long it took, how successful it was, how many
direct reclaims took place and how how many compactions. Note
the compaction figures might not fully add up as compactions
can take place for orders other than the hugepage size
X86 vanilla compaction
Final page count 913 916 (attempted 1002)
pages reclaimed 68296 9791
X86-64 vanilla compaction
Final page count: 901 902 (attempted 1002)
Total pages reclaimed: 112599 53234
PPC64 vanilla compaction
Final page count: 93 94 (attempted 110)
Total pages reclaimed: 103216 61838
There was not a dramatic improvement in success rates but it wouldn't be
expected in this case either. What was important is that fewer pages were
reclaimed in all cases reducing the amount of IO required to satisfy a
huge page allocation.
The second tests were all performance related - kernbench, netperf, iozone
and sysbench. None showed anything too remarkable.
The last test was a high-order allocation stress test. Many kernel
compiles are started to fill memory with a pressured mix of unmovable and
movable allocations. During this, an attempt is made to allocate 90% of
memory as huge pages - one at a time with small delays between attempts to
avoid flooding the IO queue.
vanilla compaction
Percentage of request allocated X86 98 99
Percentage of request allocated X86-64 95 98
Percentage of request allocated PPC64 55 70
This patch:
rmap_walk_anon() does not use page_lock_anon_vma() for looking up and
locking an anon_vma and it does not appear to have sufficient locking to
ensure the anon_vma does not disappear from under it.
This patch copies an approach used by KSM to take a reference on the
anon_vma while pages are being migrated. This should prevent rmap_walk()
running into nasty surprises later because anon_vma has been freed.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24 14:32:17 -07:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:53 -07:00
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
2023-03-03 11:01:55 +08:00
|
|
|
|
2011-10-31 17:06:57 -07:00
|
|
|
|
2011-01-13 15:45:56 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fs: convert mpage_readpages to mpage_readahead
Implement the new readahead aop and convert all callers (block_dev,
exfat, ext2, fat, gfs2, hpfs, isofs, jfs, nilfs2, ocfs2, omfs, qnx6,
reiserfs & udf).
The callers are all trivial except for GFS2 & OCFS2.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> # ocfs2
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> # ocfs2
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-17-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-01 21:47:02 -07:00
|
|
|
|
2011-01-13 15:45:56 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-10-31 17:06:57 -07:00
|
|
|
|
2011-01-13 15:45:56 -08:00
|
|
|
|
2023-04-28 13:54:38 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
2011-03-22 16:33:11 -07:00
|
|
|
|
2013-04-29 15:07:58 -07:00
|
|
|
|
2012-01-12 17:19:43 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-03-22 16:33:11 -07:00
|
|
|
|
2017-09-08 16:12:06 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-03-22 16:33:11 -07:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
2011-03-22 16:33:11 -07:00
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2015-11-05 18:49:56 -08:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
|
|
|
|
|
2011-01-13 15:47:30 -08:00
|
|
|
|
2007-07-26 10:41:07 -07:00
|
|
|
|
2007-08-30 23:56:21 -07:00
|
|
|
|
|
|
|
|
|
2015-11-05 18:49:56 -08:00
|
|
|
|
2022-09-02 20:46:50 +01:00
|
|
|
|
2015-11-05 18:49:56 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2007-07-26 10:41:07 -07:00
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
2022-09-02 20:46:50 +01:00
|
|
|
|
2008-02-04 22:29:33 -08:00
|
|
|
|
2015-11-05 18:49:49 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-11-05 18:49:49 -08:00
|
|
|
|
|
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
|
|
|
|
|
2015-11-05 18:49:49 -08:00
|
|
|
|
2025-07-04 12:25:12 +02:00
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
2025-08-11 16:39:47 +02:00
|
|
|
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:05 -07:00
|
|
|
|
|
|
|
|
|
2007-07-26 10:41:07 -07:00
|
|
|
|
2008-02-04 22:29:33 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
2008-02-04 22:29:33 -08:00
|
|
|
|
2020-12-14 19:13:02 -08:00
|
|
|
|
2008-02-04 22:29:33 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
2008-02-04 22:29:33 -08:00
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
2015-11-05 18:49:49 -08:00
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
|
|
|
|
|
migrate_pages: fix deadlock in batched migration
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 11:01:53 +08:00
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
2014-12-12 16:56:19 -08:00
|
|
|
|
2007-07-26 10:41:07 -07:00
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
2025-08-11 16:39:47 +02:00
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:41 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
migrate_pages: fix deadlock in batched migration
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 11:01:53 +08:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
2023-02-13 20:34:41 +08:00
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2023-02-13 20:34:41 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
|
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
2025-07-04 12:25:12 +02:00
|
|
|
|
2025-07-04 12:25:05 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:39 +08:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
2022-02-14 18:33:17 -08:00
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
2022-02-14 18:33:17 -08:00
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
2022-02-14 18:33:17 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
2022-02-14 18:33:17 -08:00
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
mm: remap unused subpages to shared zeropage when splitting isolated thp
Patch series "mm: split underused THPs", v5.
The current upstream default policy for THP is always. However, Meta uses
madvise in production as the current THP=always policy vastly
overprovisions THPs in sparsely accessed memory areas, resulting in
excessive memory pressure and premature OOM killing. Using madvise +
relying on khugepaged has certain drawbacks over THP=always. Using
madvise hints mean THPs aren't "transparent" and require userspace
changes. Waiting for khugepaged to scan memory and collapse pages into
THP can be slow and unpredictable in terms of performance (i.e. you dont
know when the collapse will happen), while production environments require
predictable performance. If there is enough memory available, its better
for both performance and predictability to have a THP from fault time,
i.e. THP=always rather than wait for khugepaged to collapse it, and deal
with sparsely populated THPs when the system is running out of memory.
This patch series is an attempt to mitigate the issue of running out of
memory when THP is always enabled. During runtime whenever a THP is being
faulted in or collapsed by khugepaged, the THP is added to a list.
Whenever memory reclaim happens, the kernel runs the deferred_split
shrinker which goes through the list and checks if the THP was underused,
i.e. how many of the base 4K pages of the entire THP were zero-filled.
If this number goes above a certain threshold, the shrinker will attempt
to split that THP. Then at remap time, the pages that were zero-filled
are mapped to the shared zeropage, hence saving memory. This method
avoids the downside of wasting memory in areas where THP is sparsely
filled when THP is always enabled, while still providing the upside THPs
like reduced TLB misses without having to use madvise.
Meta production workloads that were CPU bound (>99% CPU utilzation) were
tested with THP shrinker. The results after 2 hours are as follows:
| THP=madvise | THP=always | THP=always
| | | + shrinker series
| | | + max_ptes_none=409
-----------------------------------------------------------------------------
Performance improvement | - | +1.8% | +1.7%
(over THP=madvise) | | |
-----------------------------------------------------------------------------
Memory usage | 54.6G | 58.8G (+7.7%) | 55.9G (+2.4%)
-----------------------------------------------------------------------------
max_ptes_none=409 means that any THP that has more than 409 out of 512
(80%) zero filled filled pages will be split.
To test out the patches, the below commands without the shrinker will
invoke OOM killer immediately and kill stress, but will not fail with the
shrinker:
echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
mkdir /sys/fs/cgroup/test
echo $$ > /sys/fs/cgroup/test/cgroup.procs
echo 20M > /sys/fs/cgroup/test/memory.max
echo 0 > /sys/fs/cgroup/test/memory.swap.max
# allocate twice memory.max for each stress worker and touch 40/512 of
# each THP, i.e. vm-stride 50K.
# With the shrinker, max_ptes_none of 470 and below won't invoke OOM
# killer.
# Without the shrinker, OOM killer is invoked immediately irrespective
# of max_ptes_none value and kills stress.
stress --vm 1 --vm-bytes 40M --vm-stride 50K
This patch (of 5):
Here being unused means containing only zeros and inaccessible to
userspace. When splitting an isolated thp under reclaim or migration, the
unused subpages can be mapped to the shared zeropage, hence saving memory.
This is particularly helpful when the internal fragmentation of a thp is
high, i.e. it has many untouched subpages.
This is also a prerequisite for THP low utilization shrinker which will be
introduced in later patches, where underutilized THPs are split, and the
zero-filled pages are freed saving memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240830100438.3623486-3-usamaarif642@gmail.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Shuang Zhai <zhais@google.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-30 11:03:36 +01:00
|
|
|
|
mm: migration: take a reference to the anon_vma before migrating
This patchset is a memory compaction mechanism that reduces external
fragmentation memory by moving GFP_MOVABLE pages to a fewer number of
pageblocks. The term "compaction" was chosen as there are is a number of
mechanisms that are not mutually exclusive that can be used to defragment
memory. For example, lumpy reclaim is a form of defragmentation as was
slub "defragmentation" (really a form of targeted reclaim). Hence, this
is called "compaction" to distinguish it from other forms of
defragmentation.
In this implementation, a full compaction run involves two scanners
operating within a zone - a migration and a free scanner. The migration
scanner starts at the beginning of a zone and finds all movable pages
within one pageblock_nr_pages-sized area and isolates them on a
migratepages list. The free scanner begins at the end of the zone and
searches on a per-area basis for enough free pages to migrate all the
pages on the migratepages list. As each area is respectively migrated or
exhausted of free pages, the scanners are advanced one area. A compaction
run completes within a zone when the two scanners meet.
This method is a bit primitive but is easy to understand and greater
sophistication would require maintenance of counters on a per-pageblock
basis. This would have a big impact on allocator fast-paths to improve
compaction which is a poor trade-off.
It also does not try relocate virtually contiguous pages to be physically
contiguous. However, assuming transparent hugepages were in use, a
hypothetical khugepaged might reuse compaction code to isolate free pages,
split them and relocate userspace pages for promotion.
Memory compaction can be triggered in one of three ways. It may be
triggered explicitly by writing any value to /proc/sys/vm/compact_memory
and compacting all of memory. It can be triggered on a per-node basis by
writing any value to /sys/devices/system/node/nodeN/compact where N is the
node ID to be compacted. When a process fails to allocate a high-order
page, it may compact memory in an attempt to satisfy the allocation
instead of entering direct reclaim. Explicit compaction does not finish
until the two scanners meet and direct compaction ends if a suitable page
becomes available that would meet watermarks.
The series is in 14 patches. The first three are not "core" to the series
but are important pre-requisites.
Patch 1 reference counts anon_vma for rmap_walk_anon(). Without this
patch, it's possible to use anon_vma after free if the caller is
not holding a VMA or mmap_sem for the pages in question. While
there should be no existing user that causes this problem,
it's a requirement for memory compaction to be stable. The patch
is at the start of the series for bisection reasons.
Patch 2 merges the KSM and migrate counts. It could be merged with patch 1
but would be slightly harder to review.
Patch 3 skips over unmapped anon pages during migration as there are no
guarantees about the anon_vma existing. There is a window between
when a page was isolated and migration started during which anon_vma
could disappear.
Patch 4 notes that PageSwapCache pages can still be migrated even if they
are unmapped.
Patch 5 allows CONFIG_MIGRATION to be set without CONFIG_NUMA
Patch 6 exports a "unusable free space index" via debugfs. It's
a measure of external fragmentation that takes the size of the
allocation request into account. It can also be calculated from
userspace so can be dropped if requested
Patch 7 exports a "fragmentation index" which only has meaning when an
allocation request fails. It determines if an allocation failure
would be due to a lack of memory or external fragmentation.
Patch 8 moves the definition for LRU isolation modes for use by compaction
Patch 9 is the compaction mechanism although it's unreachable at this point
Patch 10 adds a means of compacting all of memory with a proc trgger
Patch 11 adds a means of compacting a specific node with a sysfs trigger
Patch 12 adds "direct compaction" before "direct reclaim" if it is
determined there is a good chance of success.
Patch 13 adds a sysctl that allows tuning of the threshold at which the
kernel will compact or direct reclaim
Patch 14 temporarily disables compaction if an allocation failure occurs
after compaction.
Testing of compaction was in three stages. For the test, debugging,
preempt, the sleep watchdog and lockdep were all enabled but nothing nasty
popped out. min_free_kbytes was tuned as recommended by hugeadm to help
fragmentation avoidance and high-order allocations. It was tested on X86,
X86-64 and PPC64.
Ths first test represents one of the easiest cases that can be faced for
lumpy reclaim or memory compaction.
1. Machine freshly booted and configured for hugepage usage with
a) hugeadm --create-global-mounts
b) hugeadm --pool-pages-max DEFAULT:8G
c) hugeadm --set-recommended-min_free_kbytes
d) hugeadm --set-recommended-shmmax
The min_free_kbytes here is important. Anti-fragmentation works best
when pageblocks don't mix. hugeadm knows how to calculate a value that
will significantly reduce the worst of external-fragmentation-related
events as reported by the mm_page_alloc_extfrag tracepoint.
2. Load up memory
a) Start updatedb
b) Create in parallel a X files of pagesize*128 in size. Wait
until files are created. By parallel, I mean that 4096 instances
of dd were launched, one after the other using &. The crude
objective being to mix filesystem metadata allocations with
the buffer cache.
c) Delete every second file so that pageblocks are likely to
have holes
d) kill updatedb if it's still running
At this point, the system is quiet, memory is full but it's full with
clean filesystem metadata and clean buffer cache that is unmapped.
This is readily migrated or discarded so you'd expect lumpy reclaim
to have no significant advantage over compaction but this is at
the POC stage.
3. In increments, attempt to allocate 5% of memory as hugepages.
Measure how long it took, how successful it was, how many
direct reclaims took place and how how many compactions. Note
the compaction figures might not fully add up as compactions
can take place for orders other than the hugepage size
X86 vanilla compaction
Final page count 913 916 (attempted 1002)
pages reclaimed 68296 9791
X86-64 vanilla compaction
Final page count: 901 902 (attempted 1002)
Total pages reclaimed: 112599 53234
PPC64 vanilla compaction
Final page count: 93 94 (attempted 110)
Total pages reclaimed: 103216 61838
There was not a dramatic improvement in success rates but it wouldn't be
expected in this case either. What was important is that fewer pages were
reclaimed in all cases reducing the amount of IO required to satisfy a
huge page allocation.
The second tests were all performance related - kernbench, netperf, iozone
and sysbench. None showed anything too remarkable.
The last test was a high-order allocation stress test. Many kernel
compiles are started to fill memory with a pressured mix of unmovable and
movable allocations. During this, an attempt is made to allocate 90% of
memory as huge pages - one at a time with small delays between attempts to
avoid flooding the IO queue.
vanilla compaction
Percentage of request allocated X86 98 99
Percentage of request allocated X86-64 95 98
Percentage of request allocated PPC64 55 70
This patch:
rmap_walk_anon() does not use page_lock_anon_vma() for looking up and
locking an anon_vma and it does not appear to have sufficient locking to
ensure the anon_vma does not disappear from under it.
This patch copies an approach used by KSM to take a reference on the
anon_vma while pages are being migrated. This should prevent rmap_walk()
running into nasty surprises later because anon_vma has been freed.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24 14:32:17 -07:00
|
|
|
|
2015-11-05 18:49:49 -08:00
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
2025-07-11 10:59:10 -04:00
|
|
|
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:02 -07:00
|
|
|
|
2022-09-02 20:46:46 +01:00
|
|
|
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:02 -07:00
|
|
|
|
2022-02-14 18:33:17 -08:00
|
|
|
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:02 -07:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
mm: use put_page() to free page instead of putback_lru_page()
Recently, I got many reports about perfermance degradation in embedded
system(Android mobile phone, webOS TV and so on) and easy fork fail.
The problem was fragmentation caused by zram and GPU driver mainly.
With memory pressure, their pages were spread out all of pageblock and
it cannot be migrated with current compaction algorithm which supports
only LRU pages. In the end, compaction cannot work well so reclaimer
shrinks all of working set pages. It made system very slow and even to
fail to fork easily which requires order-[2 or 3] allocations.
Other pain point is that they cannot use CMA memory space so when OOM
kill happens, I can see many free pages in CMA area, which is not memory
efficient. In our product which has big CMA memory, it reclaims zones
too exccessively to allocate GPU and zram page although there are lots
of free space in CMA so system becomes very slow easily.
To solve these problem, this patch tries to add facility to migrate
non-lru pages via introducing new functions and page flags to help
migration.
struct address_space_operations {
..
..
bool (*isolate_page)(struct page *, isolate_mode_t);
void (*putback_page)(struct page *);
..
}
new page flags
PG_movable
PG_isolated
For details, please read description in "mm: migrate: support non-lru
movable page migration".
Originally, Gioh Kim had tried to support this feature but he moved so I
took over the work. I took many code from his work and changed a little
bit and Konstantin Khlebnikov helped Gioh a lot so he should deserve to
have many credit, too.
And I should mention Chulmin who have tested this patchset heavily so I
can find many bugs from him. :)
Thanks, Gioh, Konstantin and Chulmin!
This patchset consists of five parts.
1. clean up migration
mm: use put_page to free page instead of putback_lru_page
2. add non-lru page migration feature
mm: migrate: support non-lru movable page migration
3. rework KVM memory-ballooning
mm: balloon: use general non-lru movable page feature
4. zsmalloc refactoring for preparing page migration
zsmalloc: keep max_object in size_class
zsmalloc: use bit_spin_lock
zsmalloc: use accessor
zsmalloc: factor page chain functionality out
zsmalloc: introduce zspage structure
zsmalloc: separate free_zspage from putback_zspage
zsmalloc: use freeobj for index
5. zsmalloc page migration
zsmalloc: page migration support
zram: use __GFP_MOVABLE for memory allocation
This patch (of 12):
Procedure of page migration is as follows:
First of all, it should isolate a page from LRU and try to migrate the
page. If it is successful, it releases the page for freeing.
Otherwise, it should put the page back to LRU list.
For LRU pages, we have used putback_lru_page for both freeing and
putback to LRU list. It's okay because put_page is aware of LRU list so
if it releases last refcount of the page, it removes the page from LRU
list. However, It makes unnecessary operations (e.g., lru_cache_add,
pagevec and flags operations. It would be not significant but no worth
to do) and harder to support new non-lru page migration because put_page
isn't aware of non-lru page's data structure.
To solve the problem, we can add new hook in put_page with PageMovable
flags check but it can increase overhead in hot path and needs new
locking scheme to stabilize the flag check with put_page.
So, this patch cleans it up to divide two semantic(ie, put and putback).
If migration is successful, use put_page instead of putback_lru_page and
use putback_lru_page only on failure. That makes code more readable and
doesn't add overhead in put_page.
Comment from Vlastimil
"Yeah, and compaction (perhaps also other migration users) has to drain
the lru pvec... Getting rid of this stuff is worth even by itself."
Link: http://lkml.kernel.org/r/1464736881-24886-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 15:23:02 -07:00
|
|
|
|
2020-12-14 19:13:06 -08:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
|
|
|
|
|
2020-12-14 19:13:06 -08:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-12-11 16:02:42 -08:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
2011-10-31 17:06:57 -07:00
|
|
|
|
2020-12-14 19:13:06 -08:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
|
|
|
|
|
2020-12-14 19:13:06 -08:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
|
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2014-06-04 16:08:25 -07:00
|
|
|
|
mm: migrate: record the mlocked page status to remove unnecessary lru drain
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Meanwhile, the compaction latency shows some improvements when running
thpscale:
base patched
Amean fault-both-1 1131.22 ( 0.00%) 1112.55 * 1.65%*
Amean fault-both-3 2489.75 ( 0.00%) 2324.15 * 6.65%*
Amean fault-both-5 3257.37 ( 0.00%) 3183.18 * 2.28%*
Amean fault-both-7 4257.99 ( 0.00%) 4079.04 * 4.20%*
Amean fault-both-12 6614.02 ( 0.00%) 6075.60 * 8.14%*
Amean fault-both-18 10607.78 ( 0.00%) 8978.86 * 15.36%*
Amean fault-both-24 14911.65 ( 0.00%) 11619.55 * 22.08%*
Amean fault-both-30 14954.67 ( 0.00%) 14925.66 * 0.19%*
Amean fault-both-32 16654.87 ( 0.00%) 15580.31 * 6.45%*
Link: https://lkml.kernel.org/r/06e9153a7a4850352ec36602df3a3a844de45698.1697859741.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-21 12:33:22 +08:00
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2023-02-13 20:34:42 +08:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2015-11-05 18:49:46 -08:00
|
|
|
|
2014-12-12 16:56:19 -08:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-01 21:11:05 -07:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
2022-09-02 20:46:47 +01:00
|
|
|
|
2021-02-04 18:32:17 -08:00
|
|
|
|
2025-01-13 14:16:09 +01:00
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2021-02-04 18:32:17 -08:00
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
|
|
|
|
|
2022-09-02 20:46:47 +01:00
|
|
|
|
2017-09-08 16:12:06 -07:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
2017-09-08 16:12:06 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-09-02 20:46:47 +01:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
|
|
|
|
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-28 16:22:02 -08:00
|
|
|
|
|
|
|
|
|
2022-09-02 20:46:47 +01:00
|
|
|
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-28 16:22:02 -08:00
|
|
|
|
|
|
|
|
|
2022-11-01 15:30:59 -07:00
|
|
|
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-28 16:22:02 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-09-02 20:46:47 +01:00
|
|
|
|
2022-09-02 20:46:50 +01:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
2022-09-02 20:46:47 +01:00
|
|
|
|
2015-11-05 18:49:49 -08:00
|
|
|
|
|
|
|
|
|
2022-09-02 20:46:47 +01:00
|
|
|
|
2021-06-30 18:54:16 -07:00
|
|
|
|
2020-11-13 22:52:16 -08:00
|
|
|
|
2022-09-02 20:46:47 +01:00
|
|
|
|
2020-11-13 22:52:16 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-04-12 20:35:03 +01:00
|
|
|
|
2020-11-13 22:52:16 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-04-28 23:16:07 -07:00
|
|
|
|
2020-11-13 22:52:16 -08:00
|
|
|
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-01 21:11:05 -07:00
|
|
|
|
2022-01-28 14:29:43 -05:00
|
|
|
|
2014-12-12 16:56:19 -08:00
|
|
|
|
2020-11-13 22:52:16 -08:00
|
|
|
|
2022-04-28 23:16:07 -07:00
|
|
|
|
2020-11-13 22:52:16 -08:00
|
|
|
|
2014-12-12 16:56:19 -08:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
2022-09-02 20:46:47 +01:00
|
|
|
|
2022-05-12 20:23:05 -07:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
2020-11-13 22:52:16 -08:00
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2.
While discussing the issue with huge_pte_offset [1], I remembered that
there were more outstanding hugetlb races. These issues are:
1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become
invalid via a call to huge_pmd_unshare by another thread.
2) hugetlbfs page faults can race with truncation causing invalid global
reserve counts and state.
A previous attempt was made to use i_mmap_rwsem in this manner as
described at [2]. However, those patches were reverted starting with [3]
due to locking issues.
To effectively use i_mmap_rwsem to address the above issues it needs to be
held (in read mode) during page fault processing. However, during fault
processing we need to lock the page we will be adding. Lock ordering
requires we take page lock before i_mmap_rwsem. Waiting until after
taking the page lock is too late in the fault process for the
synchronization we want to do.
To address this lock ordering issue, the following patches change the lock
ordering for hugetlb pages. This is not too invasive as hugetlbfs
processing is done separate from core mm in many places. However, I don't
really like this idea. Much ugliness is contained in the new routine
hugetlb_page_mapping_lock_write() of patch 1.
The only other way I can think of to address these issues is by catching
all the races. After catching a race, cleanup, backout, retry ... etc,
as needed. This can get really ugly, especially for huge page
reservations. At one time, I started writing some of the reservation
backout code for page faults and it got so ugly and complicated I went
down the path of adding synchronization to avoid the races. Any other
suggestions would be welcome.
[1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/
[2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/
[3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com
[4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/
[5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/
This patch (of 2):
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with
the ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called.
One problem with this scheme is that it requires taking i_mmap_rwsem
before taking the page lock during page faults. This is not the order
specified in the rest of mm code. Handling of hugetlbfs pages is mostly
isolated today. Therefore, we use this alternative locking order for
PageHuge() pages.
mapping->i_mmap_rwsem
hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
page->flags PG_locked (lock_page)
To help with lock ordering issues, hugetlb_page_mapping_lock_write() is
introduced to write lock the i_mmap_rwsem associated with a page.
In most cases it is easy to get address_space via vma->vm_file->f_mapping.
However, in the case of migration or memory errors for anon pages we do
not have an associated vma. A new routine _get_hugetlb_page_mapping()
will use anon_vma to get address_space in these cases.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-01 21:11:05 -07:00
|
|
|
|
2022-09-02 20:46:47 +01:00
|
|
|
|
2015-11-05 18:49:49 -08:00
|
|
|
|
|
|
|
|
|
2011-01-13 15:47:31 -08:00
|
|
|
|
2011-03-22 16:32:46 -07:00
|
|
|
|
2012-07-31 16:42:27 -07:00
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2022-11-01 15:30:59 -07:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2015-11-05 18:49:46 -08:00
|
|
|
|
2012-07-31 16:42:27 -07:00
|
|
|
|
hugetlbfs: fix races and page leaks during migration
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-28 16:22:02 -08:00
|
|
|
|
2022-09-02 20:46:47 +01:00
|
|
|
|
2011-12-08 14:34:20 -08:00
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2025-01-13 14:16:09 +01:00
|
|
|
|
2021-05-04 18:37:07 -07:00
|
|
|
|
2022-09-02 20:46:47 +01:00
|
|
|
|
2014-06-04 16:08:25 -07:00
|
|
|
|
|
|
|
|
|
2025-01-13 14:16:08 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-06-04 16:08:25 -07:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
2014-06-04 16:08:25 -07:00
|
|
|
|
2025-01-13 14:16:08 +01:00
|
|
|
|
2014-06-04 16:08:25 -07:00
|
|
|
|
2010-09-08 10:19:35 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-29 10:13:06 +08:00
|
|
|
|
|
|
|
|
|
2020-12-14 19:13:16 -08:00
|
|
|
|
2022-08-17 16:14:02 +08:00
|
|
|
|
2020-12-14 19:13:16 -08:00
|
|
|
|
2024-07-29 10:13:06 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
|
|
|
|
|
|
2022-08-17 16:14:06 +08:00
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
|
2020-12-14 19:13:16 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:37 +08:00
|
|
|
|
2023-03-03 11:01:55 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:37 +08:00
|
|
|
|
migrate_pages: organize stats with struct migrate_pages_stats
Patch series "migrate_pages(): batch TLB flushing", v5.
Now, migrate_pages() migrates folios one by one, like the fake code as
follows,
for each folio
unmap
flush TLB
copy
restore map
If multiple folios are passed to migrate_pages(), there are opportunities
to batch the TLB flushing and copying. That is, we can change the code to
something as follows,
for each folio
unmap
for each folio
flush TLB
for each folio
copy
for each folio
restore map
The total number of TLB flushing IPI can be reduced considerably. And we
may use some hardware accelerator such as DSA to accelerate the folio
copying.
So in this patch, we refactor the migrate_pages() implementation and
implement the TLB flushing batching. Base on this, hardware accelerated
folio copying can be implemented.
If too many folios are passed to migrate_pages(), in the naive batched
implementation, we may unmap too many folios at the same time. The
possibility for a task to wait for the migrated folios to be mapped again
increases. So the latency may be hurt. To deal with this issue, the max
number of folios be unmapped in batch is restricted to no more than
HPAGE_PMD_NR in the unit of page. That is, the influence is at the same
level of THP migration.
We use the following test to measure the performance impact of the
patchset,
On a 2-socket Intel server,
- Run pmbench memory accessing benchmark
- Run `migratepages` to migrate pages of pmbench between node 0 and
node 1 back and forth.
With the patch, the TLB flushing IPI reduces 99.1% during the test and
the number of pages migrated successfully per second increases 291.7%.
Xin Hao helped to test the patchset on an ARM64 server with 128 cores,
2 NUMA nodes. Test results show that the page migration performance
increases up to 78%.
This patch (of 9):
Define struct migrate_pages_stats to organize the various statistics in
migrate_pages(). This makes it easier to collect and consume the
statistics in multiple functions. This will be needed in the following
patches in the series.
Link: https://lkml.kernel.org/r/20230213123444.155149-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230213123444.155149-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 20:34:36 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-17 12:31:28 -04:00
|
|
|
|
migrate_pages: organize stats with struct migrate_pages_stats
Patch series "migrate_pages(): batch TLB flushing", v5.
Now, migrate_pages() migrates folios one by one, like the fake code as
follows,
for each folio
unmap
flush TLB
copy
restore map
If multiple folios are passed to migrate_pages(), there are opportunities
to batch the TLB flushing and copying. That is, we can change the code to
something as follows,
for each folio
unmap
for each folio
flush TLB
for each folio
copy
for each folio
restore map
The total number of TLB flushing IPI can be reduced considerably. And we
may use some hardware accelerator such as DSA to accelerate the folio
copying.
So in this patch, we refactor the migrate_pages() implementation and
implement the TLB flushing batching. Base on this, hardware accelerated
folio copying can be implemented.
If too many folios are passed to migrate_pages(), in the naive batched
implementation, we may unmap too many folios at the same time. The
possibility for a task to wait for the migrated folios to be mapped again
increases. So the latency may be hurt. To deal with this issue, the max
number of folios be unmapped in batch is restricted to no more than
HPAGE_PMD_NR in the unit of page. That is, the influence is at the same
level of THP migration.
We use the following test to measure the performance impact of the
patchset,
On a 2-socket Intel server,
- Run pmbench memory accessing benchmark
- Run `migratepages` to migrate pages of pmbench between node 0 and
node 1 back and forth.
With the patch, the TLB flushing IPI reduces 99.1% during the test and
the number of pages migrated successfully per second increases 291.7%.
Xin Hao helped to test the patchset on an ARM64 server with 128 cores,
2 NUMA nodes. Test results show that the page migration performance
increases up to 78%.
This patch (of 9):
Define struct migrate_pages_stats to organize the various statistics in
migrate_pages(). This makes it easier to collect and consume the
statistics in multiple functions. This will be needed in the following
patches in the series.
Link: https://lkml.kernel.org/r/20230213123444.155149-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230213123444.155149-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 20:34:36 +08:00
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2023-02-13 20:34:37 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:37 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2023-02-13 20:34:37 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:44 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:37 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2023-02-13 20:34:37 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2023-02-13 20:34:37 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-08 15:53:58 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2024-08-08 15:53:58 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-08-11 16:39:48 +02:00
|
|
|
|
2024-08-08 15:53:58 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
migrate_pages: fix deadlock in batched migration
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 11:01:53 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2023-03-03 11:01:54 +08:00
|
|
|
|
2020-08-11 18:31:51 -07:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2022-08-17 16:14:07 +08:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2020-08-11 18:31:51 -07:00
|
|
|
|
2023-10-17 12:31:28 -04:00
|
|
|
|
2024-08-08 15:53:58 +09:00
|
|
|
|
2023-03-03 11:01:54 +08:00
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
|
|
|
|
|
2021-06-30 18:51:48 -07:00
|
|
|
|
2023-02-13 20:34:37 +08:00
|
|
|
|
migrate_pages: fix deadlock in batched migration
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 11:01:53 +08:00
|
|
|
|
|
|
|
|
|
2023-03-03 11:01:54 +08:00
|
|
|
|
migrate_pages_batch: simplify retrying and failure counting of large folios
After recent changes to the retrying and failure counting in
migrate_pages_batch(), it was found that it's unnecessary to count
retrying and failure for normal, large, and THP folios separately.
Because we don't use retrying and failure number of large folios directly.
So, in this patch, we simplified retrying and failure counting of large
folios via counting retrying and failure of normal and large folios
together. This results in the reduced line number.
Previously, in migrate_pages_batch we need to track whether the source
folio is large/THP before splitting. So is_large is used to cache
folio_test_large() result. Now, we don't need that variable any more
because we don't count retrying and failure of large folios (only counting
that of THP folios). So, in this patch, is_large is removed to simplify
the code.
This is just code cleanup, no functionality changes are expected.
Link: https://lkml.kernel.org/r/20230510031829.11513-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-10 11:18:29 +08:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2020-08-11 18:31:51 -07:00
|
|
|
|
2022-08-17 16:14:07 +08:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
|
2023-10-17 12:31:28 -04:00
|
|
|
|
2024-10-18 15:11:51 +05:30
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
|
2023-02-13 20:34:37 +08:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2006-06-23 02:03:33 -07:00
|
|
|
|
2024-03-22 15:33:04 -04:00
|
|
|
|
|
|
|
|
|
2024-06-11 22:06:20 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-06-18 09:41:51 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-06-11 22:06:20 -07:00
|
|
|
|
2024-03-22 15:33:04 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-30 11:03:38 +01:00
|
|
|
|
|
|
|
|
|
2024-07-29 10:13:06 +08:00
|
|
|
|
2024-06-11 22:06:20 -07:00
|
|
|
|
2024-06-18 09:41:51 -04:00
|
|
|
|
2024-03-22 15:33:04 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-12-14 19:13:16 -08:00
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
|
2023-02-13 20:34:44 +08:00
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
|
|
|
|
|
|
2020-12-14 19:13:16 -08:00
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
|
2022-08-17 16:14:06 +08:00
|
|
|
|
|
|
|
|
|
2020-12-14 19:13:16 -08:00
|
|
|
|
2023-02-13 20:34:44 +08:00
|
|
|
|
migrate_pages_batch: simplify retrying and failure counting of large folios
After recent changes to the retrying and failure counting in
migrate_pages_batch(), it was found that it's unnecessary to count
retrying and failure for normal, large, and THP folios separately.
Because we don't use retrying and failure number of large folios directly.
So, in this patch, we simplified retrying and failure counting of large
folios via counting retrying and failure of normal and large folios
together. This results in the reduced line number.
Previously, in migrate_pages_batch we need to track whether the source
folio is large/THP before splitting. So is_large is used to cache
folio_test_large() result. Now, we don't need that variable any more
because we don't count retrying and failure of large folios (only counting
that of THP folios). So, in this patch, is_large is removed to simplify
the code.
This is just code cleanup, no functionality changes are expected.
Link: https://lkml.kernel.org/r/20230510031829.11513-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-10 11:18:29 +08:00
|
|
|
|
2023-02-13 20:34:44 +08:00
|
|
|
|
2024-07-29 10:13:06 +08:00
|
|
|
|
2023-02-13 20:34:44 +08:00
|
|
|
|
2023-10-17 12:31:28 -04:00
|
|
|
|
2023-02-13 20:34:44 +08:00
|
|
|
|
2022-04-28 23:16:08 -07:00
|
|
|
|
2023-02-13 20:34:44 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-04-28 23:16:08 -07:00
|
|
|
|
2025-08-11 16:39:47 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2025-08-11 16:39:47 +02:00
|
|
|
|
2020-12-14 19:13:06 -08:00
|
|
|
|
|
|
|
|
|
2025-08-11 16:39:47 +02:00
|
|
|
|
|
|
|
|
|
2020-12-14 19:13:06 -08:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
2020-12-14 19:13:06 -08:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2006-06-23 02:03:53 -07:00
|
|
|
|
2018-04-10 16:30:07 -07:00
|
|
|
|
2020-12-14 19:13:16 -08:00
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
2018-04-10 16:30:07 -07:00
|
|
|
|
migrate_pages_batch: simplify retrying and failure counting of large folios
After recent changes to the retrying and failure counting in
migrate_pages_batch(), it was found that it's unnecessary to count
retrying and failure for normal, large, and THP folios separately.
Because we don't use retrying and failure number of large folios directly.
So, in this patch, we simplified retrying and failure counting of large
folios via counting retrying and failure of normal and large folios
together. This results in the reduced line number.
Previously, in migrate_pages_batch we need to track whether the source
folio is large/THP before splitting. So is_large is used to cache
folio_test_large() result. Now, we don't need that variable any more
because we don't count retrying and failure of large folios (only counting
that of THP folios). So, in this patch, is_large is removed to simplify
the code.
This is just code cleanup, no functionality changes are expected.
Link: https://lkml.kernel.org/r/20230510031829.11513-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-10 11:18:29 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-17 12:31:28 -04:00
|
|
|
|
2024-07-29 10:13:06 +08:00
|
|
|
|
migrate_pages_batch: simplify retrying and failure counting of large folios
After recent changes to the retrying and failure counting in
migrate_pages_batch(), it was found that it's unnecessary to count
retrying and failure for normal, large, and THP folios separately.
Because we don't use retrying and failure number of large folios directly.
So, in this patch, we simplified retrying and failure counting of large
folios via counting retrying and failure of normal and large folios
together. This results in the reduced line number.
Previously, in migrate_pages_batch we need to track whether the source
folio is large/THP before splitting. So is_large is used to cache
folio_test_large() result. Now, we don't need that variable any more
because we don't count retrying and failure of large folios (only counting
that of THP folios). So, in this patch, is_large is removed to simplify
the code.
This is just code cleanup, no functionality changes are expected.
Link: https://lkml.kernel.org/r/20230510031829.11513-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-10 11:18:29 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-17 12:31:29 -04:00
|
|
|
|
migrate_pages_batch: simplify retrying and failure counting of large folios
After recent changes to the retrying and failure counting in
migrate_pages_batch(), it was found that it's unnecessary to count
retrying and failure for normal, large, and THP folios separately.
Because we don't use retrying and failure number of large folios directly.
So, in this patch, we simplified retrying and failure counting of large
folios via counting retrying and failure of normal and large folios
together. This results in the reduced line number.
Previously, in migrate_pages_batch we need to track whether the source
folio is large/THP before splitting. So is_large is used to cache
folio_test_large() result. Now, we don't need that variable any more
because we don't count retrying and failure of large folios (only counting
that of THP folios). So, in this patch, is_large is removed to simplify
the code.
This is just code cleanup, no functionality changes are expected.
Link: https://lkml.kernel.org/r/20230510031829.11513-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-10 11:18:29 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-04-10 16:30:07 -07:00
|
|
|
|
2020-08-11 18:31:51 -07:00
|
|
|
|
2022-01-14 14:08:34 -08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
2022-08-17 16:14:03 +08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
migrate_pages_batch: simplify retrying and failure counting of large folios
After recent changes to the retrying and failure counting in
migrate_pages_batch(), it was found that it's unnecessary to count
retrying and failure for normal, large, and THP folios separately.
Because we don't use retrying and failure number of large folios directly.
So, in this patch, we simplified retrying and failure counting of large
folios via counting retrying and failure of normal and large folios
together. This results in the reduced line number.
Previously, in migrate_pages_batch we need to track whether the source
folio is large/THP before splitting. So is_large is used to cache
folio_test_large() result. Now, we don't need that variable any more
because we don't count retrying and failure of large folios (only counting
that of THP folios). So, in this patch, is_large is removed to simplify
the code.
This is just code cleanup, no functionality changes are expected.
Link: https://lkml.kernel.org/r/20230510031829.11513-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-10 11:18:29 +08:00
|
|
|
|
|
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2025-08-11 16:39:47 +02:00
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
|
|
|
|
|
2014-01-21 15:51:14 -08:00
|
|
|
|
2020-12-14 19:13:16 -08:00
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
|
|
|
|
|
|
2014-01-21 15:51:14 -08:00
|
|
|
|
|
|
|
|
|
migrate_pages_batch: simplify retrying and failure counting of large folios
After recent changes to the retrying and failure counting in
migrate_pages_batch(), it was found that it's unnecessary to count
retrying and failure for normal, large, and THP folios separately.
Because we don't use retrying and failure number of large folios directly.
So, in this patch, we simplified retrying and failure counting of large
folios via counting retrying and failure of normal and large folios
together. This results in the reduced line number.
Previously, in migrate_pages_batch we need to track whether the source
folio is large/THP before splitting. So is_large is used to cache
folio_test_large() result. Now, we don't need that variable any more
because we don't count retrying and failure of large folios (only counting
that of THP folios). So, in this patch, is_large is removed to simplify
the code.
This is just code cleanup, no functionality changes are expected.
Link: https://lkml.kernel.org/r/20230510031829.11513-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-10 11:18:29 +08:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
2006-06-23 02:03:51 -07:00
|
|
|
|
2006-06-23 02:03:33 -07:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
|
|
|
|
|
2022-08-17 16:14:08 +08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
2023-02-13 20:34:43 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
migrate_pages_batch: simplify retrying and failure counting of large folios
After recent changes to the retrying and failure counting in
migrate_pages_batch(), it was found that it's unnecessary to count
retrying and failure for normal, large, and THP folios separately.
Because we don't use retrying and failure number of large folios directly.
So, in this patch, we simplified retrying and failure counting of large
folios via counting retrying and failure of normal and large folios
together. This results in the reduced line number.
Previously, in migrate_pages_batch we need to track whether the source
folio is large/THP before splitting. So is_large is used to cache
folio_test_large() result. Now, we don't need that variable any more
because we don't count retrying and failure of large folios (only counting
that of THP folios). So, in this patch, is_large is removed to simplify
the code.
This is just code cleanup, no functionality changes are expected.
Link: https://lkml.kernel.org/r/20230510031829.11513-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-10 11:18:29 +08:00
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-08 15:53:58 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2022-08-17 16:14:08 +08:00
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
migrate_pages_batch: simplify retrying and failure counting of large folios
After recent changes to the retrying and failure counting in
migrate_pages_batch(), it was found that it's unnecessary to count
retrying and failure for normal, large, and THP folios separately.
Because we don't use retrying and failure number of large folios directly.
So, in this patch, we simplified retrying and failure counting of large
folios via counting retrying and failure of normal and large folios
together. This results in the reduced line number.
Previously, in migrate_pages_batch we need to track whether the source
folio is large/THP before splitting. So is_large is used to cache
folio_test_large() result. Now, we don't need that variable any more
because we don't count retrying and failure of large folios (only counting
that of THP folios). So, in this patch, is_large is removed to simplify
the code.
This is just code cleanup, no functionality changes are expected.
Link: https://lkml.kernel.org/r/20230510031829.11513-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-10 11:18:29 +08:00
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
|
|
|
|
|
2024-08-08 15:53:58 +09:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:40 +08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-03 11:01:55 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2023-03-03 11:01:55 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-17 12:31:28 -04:00
|
|
|
|
2023-03-03 11:01:55 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-17 12:31:28 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-03 11:01:55 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2023-03-03 11:01:55 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-03 11:01:55 +08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-03 11:01:54 +08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
migrate_pages: fix deadlock in batched migration
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 11:01:53 +08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-03 11:01:55 +08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
2023-03-03 11:01:55 +08:00
|
|
|
|
migrate_pages: fix deadlock in batched migration
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d519 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-03 11:01:53 +08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
2023-03-03 11:01:55 +08:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-03 11:01:55 +08:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-03 11:01:54 +08:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
2023-03-03 11:01:54 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-03 11:01:54 +08:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:53 -07:00
|
|
|
|
2020-12-14 19:13:06 -08:00
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
|
2020-12-14 19:13:06 -08:00
|
|
|
|
|
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
|
2020-12-14 19:13:06 -08:00
|
|
|
|
2022-10-24 16:34:21 +08:00
|
|
|
|
2022-11-09 09:23:48 +08:00
|
|
|
|
|
|
|
|
|
2022-10-24 16:34:21 +08:00
|
|
|
|
|
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
2022-10-24 16:34:21 +08:00
|
|
|
|
migrate_pages: organize stats with struct migrate_pages_stats
Patch series "migrate_pages(): batch TLB flushing", v5.
Now, migrate_pages() migrates folios one by one, like the fake code as
follows,
for each folio
unmap
flush TLB
copy
restore map
If multiple folios are passed to migrate_pages(), there are opportunities
to batch the TLB flushing and copying. That is, we can change the code to
something as follows,
for each folio
unmap
for each folio
flush TLB
for each folio
copy
for each folio
restore map
The total number of TLB flushing IPI can be reduced considerably. And we
may use some hardware accelerator such as DSA to accelerate the folio
copying.
So in this patch, we refactor the migrate_pages() implementation and
implement the TLB flushing batching. Base on this, hardware accelerated
folio copying can be implemented.
If too many folios are passed to migrate_pages(), in the naive batched
implementation, we may unmap too many folios at the same time. The
possibility for a task to wait for the migrated folios to be mapped again
increases. So the latency may be hurt. To deal with this issue, the max
number of folios be unmapped in batch is restricted to no more than
HPAGE_PMD_NR in the unit of page. That is, the influence is at the same
level of THP migration.
We use the following test to measure the performance impact of the
patchset,
On a 2-socket Intel server,
- Run pmbench memory accessing benchmark
- Run `migratepages` to migrate pages of pmbench between node 0 and
node 1 back and forth.
With the patch, the TLB flushing IPI reduces 99.1% during the test and
the number of pages migrated successfully per second increases 291.7%.
Xin Hao helped to test the patchset on an ARM64 server with 128 cores,
2 NUMA nodes. Test results show that the page migration performance
increases up to 78%.
This patch (of 9):
Define struct migrate_pages_stats to organize the various statistics in
migrate_pages(). This makes it easier to collect and consume the
statistics in multiple functions. This will be needed in the following
patches in the series.
Link: https://lkml.kernel.org/r/20230213123444.155149-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230213123444.155149-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 20:34:36 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-17 12:31:29 -04:00
|
|
|
|
|
|
|
|
|
2012-10-19 14:07:31 +01:00
|
|
|
|
2021-09-02 14:59:13 -07:00
|
|
|
|
migrate_pages: organize stats with struct migrate_pages_stats
Patch series "migrate_pages(): batch TLB flushing", v5.
Now, migrate_pages() migrates folios one by one, like the fake code as
follows,
for each folio
unmap
flush TLB
copy
restore map
If multiple folios are passed to migrate_pages(), there are opportunities
to batch the TLB flushing and copying. That is, we can change the code to
something as follows,
for each folio
unmap
for each folio
flush TLB
for each folio
copy
for each folio
restore map
The total number of TLB flushing IPI can be reduced considerably. And we
may use some hardware accelerator such as DSA to accelerate the folio
copying.
So in this patch, we refactor the migrate_pages() implementation and
implement the TLB flushing batching. Base on this, hardware accelerated
folio copying can be implemented.
If too many folios are passed to migrate_pages(), in the naive batched
implementation, we may unmap too many folios at the same time. The
possibility for a task to wait for the migrated folios to be mapped again
increases. So the latency may be hurt. To deal with this issue, the max
number of folios be unmapped in batch is restricted to no more than
HPAGE_PMD_NR in the unit of page. That is, the influence is at the same
level of THP migration.
We use the following test to measure the performance impact of the
patchset,
On a 2-socket Intel server,
- Run pmbench memory accessing benchmark
- Run `migratepages` to migrate pages of pmbench between node 0 and
node 1 back and forth.
With the patch, the TLB flushing IPI reduces 99.1% during the test and
the number of pages migrated successfully per second increases 291.7%.
Xin Hao helped to test the patchset on an ARM64 server with 128 cores,
2 NUMA nodes. Test results show that the page migration performance
increases up to 78%.
This patch (of 9):
Define struct migrate_pages_stats to organize the various statistics in
migrate_pages(). This makes it easier to collect and consume the
statistics in multiple functions. This will be needed in the following
patches in the series.
Link: https://lkml.kernel.org/r/20230213123444.155149-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230213123444.155149-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 20:34:36 +08:00
|
|
|
|
2021-09-02 14:59:13 -07:00
|
|
|
|
2023-02-13 20:34:38 +08:00
|
|
|
|
2006-03-22 00:09:12 -08:00
|
|
|
|
2006-06-23 02:03:53 -07:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2020-08-11 18:37:14 -07:00
|
|
|
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-11 18:37:25 -07:00
|
|
|
|
|
|
|
|
|
2020-08-11 18:37:14 -07:00
|
|
|
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-11 18:37:25 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2020-08-11 18:37:14 -07:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
|
|
|
|
|
2020-08-11 18:37:17 -07:00
|
|
|
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-11 18:37:25 -07:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
mm: hugetlb: make the hugetlb migration strategy consistent
As discussed in previous thread [1], there is an inconsistency when
handing hugetlb migration. When handling the migration of freed hugetlb,
it prevents fallback to other NUMA nodes in
alloc_and_dissolve_hugetlb_folio(). However, when dealing with in-use
hugetlb, it allows fallback to other NUMA nodes in
alloc_hugetlb_folio_nodemask(), which can break the per-node hugetlb pool
and might result in unexpected failures when node bound workloads doesn't
get what is asssumed available.
To make hugetlb migration strategy more clear, we should list all the scenarios
of hugetlb migration and analyze whether allocation fallback is permitted:
1) Memory offline: will call dissolve_free_huge_pages() to free the
freed hugetlb, and call do_migrate_range() to migrate the in-use
hugetlb. Both can break the per-node hugetlb pool, but as this is an
explicit offlining operation, no better choice. So should allow the
hugetlb allocation fallback.
2) Memory failure: same as memory offline. Should allow fallback to a
different node might be the only option to handle it, otherwise the
impact of poisoned memory can be amplified.
3) Longterm pinning: will call migrate_longterm_unpinnable_pages() to
migrate in-use and not-longterm-pinnable hugetlb, which can break the
per-node pool. But we should fail to longterm pinning if can not
allocate on current node to avoid breaking the per-node pool.
4) Syscalls (mbind, migrate_pages, move_pages): these are explicit
users operation to move pages to other nodes, so fallback to other
nodes should not be prohibited.
5) alloc_contig_range: used by CMA allocation and virtio-mem
fake-offline to allocate given range of pages. Now the freed hugetlb
migration is not allowed to fallback, to keep consistency, the in-use
hugetlb migration should be also not allowed to fallback.
6) alloc_contig_pages: used by kfence, pgtable_debug etc. The strategy
should be consistent with that of alloc_contig_range().
Based on the analysis of the various scenarios above, introducing a new
helper to determine whether fallback is permitted according to the
migration reason..
[1] https://lore.kernel.org/all/6f26ce22d2fcd523418a085f2c588fe0776d46e7.1706794035.git.baolin.wang@linux.alibaba.com/
Link: https://lkml.kernel.org/r/3519fcd41522817307a05b40fb551e2e17e68101.1709719720.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-06 18:13:27 +08:00
|
|
|
|
|
|
|
|
|
2020-08-11 18:37:17 -07:00
|
|
|
|
2020-08-11 18:37:14 -07:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2020-08-11 18:37:20 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-08-11 18:37:14 -07:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2020-08-11 18:37:14 -07:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
mm/migrate: introduce a standard migration target allocation function
There are some similar functions for migration target allocation. Since
there is no fundamental difference, it's better to keep just one rather
than keeping all variants. This patch implements base migration target
allocation function. In the following patches, variants will be converted
to use this function.
Changes should be mechanical, but, unfortunately, there are some
differences. First, some callers' nodemask is assgined to NULL since NULL
nodemask will be considered as all available nodes, that is,
&node_states[N_MEMORY]. Second, for hugetlb page allocation, gfp_mask is
redefined as regular hugetlb allocation gfp_mask plus __GFP_THISNODE if
user provided gfp_mask has it. This is because future caller of this
function requires to set this node constaint. Lastly, if provided nodeid
is NUMA_NO_NODE, nodeid is set up to the node where migration source
lives. It helps to remove simple wrappers for setting up the nodeid.
Note that PageHighmem() call in previous function is changed to open-code
"is_highmem_idx()" since it provides more readability.
[akpm@linux-foundation.org: tweak patch title, per Vlastimil]
[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-11 18:37:25 -07:00
|
|
|
|
2020-08-11 18:37:14 -07:00
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2020-08-11 18:37:14 -07:00
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
|
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-03 10:48:57 -04:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
|
|
|
|
|
2020-08-11 18:37:28 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-03-06 18:13:26 +08:00
|
|
|
|
2020-08-11 18:37:28 -07:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
2020-08-11 18:37:28 -07:00
|
|
|
|
2021-09-02 14:59:13 -07:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
|
|
|
|
|
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk
Let's use folio_walk instead, so we can avoid taking a folio reference
when we won't even be trying to migrate the folio and to get rid of
another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return
"-EFAULT" for it as documented.
We now perform the folio_likely_mapped_shared() check under PTL, which is
what we want: relying on the mapcount and friends after dropping the PTL
does not make too much sense, as the page can get unmapped concurrently
from this process.
Further, we perform the folio isolation under PTL, similar to how we
handle it for MADV_PAGEOUT.
The possible return values for follow_page() were confusing, especially
with FOLL_DUMP set. We'll handle it like documented in the man page:
* -EFAULT: This is a zero page or the memory area is not mapped by the
process.
* -ENOENT: The page is not present.
We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to
do, but it likely doesn't really matter (just like for weird devmap,
whereby we fake "not present").
The other errros are left as is, and match the documentation in the man
page.
While at it, rename add_page_for_migration() to add_folio_for_migration().
We'll lose the "secretmem" check, but that shouldn't really matter because
these folios cannot ever be migrated. Should vma_migratable() refuse
these VMAs? Maybe.
Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 17:55:17 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: convert folio_likely_mapped_shared() to folio_maybe_mapped_shared()
Let's reuse our new MM ownership tracking infrastructure for large folios
to make folio_likely_mapped_shared() never return false negatives -- never
indicating "not mapped shared" although the folio *is* mapped shared.
With that, we can rename it to folio_maybe_mapped_shared() and get rid of
the dependency on the mapcount of the first folio page.
The semantics are now arguably clearer: no mixture of "false negatives"
and "false positives", only the remaining possibility for "false
positives".
Thoroughly document the new semantics. We might now detect that a large
folio is "maybe mapped shared" although it *no longer* is -- but once was.
Now, if more than two MMs mapped a folio at the same time, and the MM
mapping the folio exclusively at the end is not one tracked in the two
folio MM slots, we will detect the folio as "maybe mapped shared".
For anonymous folios, usually (except weird corner cases) all PTEs that
target a "maybe mapped shared" folio are R/O. As soon as a child process
would write to them (iow, actively use them), we would CoW and effectively
replace these PTEs. Most cases (below) are not expected to really matter
with large anonymous folios for this reason.
Most importantly, there will be no change at all for:
* small folios
* hugetlb folios
* PMD-mapped PMD-sized THPs (single mapping)
This change has the potential to affect existing callers of
folio_likely_mapped_shared() -> folio_maybe_mapped_shared():
(1) fs/proc/task_mmu.c: no change (hugetlb)
(2) khugepaged counts PTEs that target shared folios towards
max_ptes_shared (default: HPAGE_PMD_NR / 2), meaning we could skip a
collapse where we would have previously collapsed. This only applies
to anonymous folios and is not expected to matter in practice.
Worth noting that this change sorts out case (A) documented in
commit 1bafe96e89f0 ("mm/khugepaged: replace page_mapcount() check by
folio_likely_mapped_shared()") by removing the possibility for "false
negatives".
(3) MADV_COLD / MADV_PAGEOUT / MADV_FREE will not try splitting
PTE-mapped THPs that are considered shared but not fully covered by
the requested range, consequently not processing them.
PMD-mapped PMD-sized THP are not affected, or when all PTEs are
covered. These functions are usually only called on anon/file folios
that are exclusively mapped most of the time (no other file mappings
or no fork()), so the "false negatives" are not expected to matter in
practice.
(4) mbind() / migrate_pages() / move_pages() will refuse to migrate
shared folios unless MPOL_MF_MOVE_ALL is effective (requires
CAP_SYS_NICE). We will now reject some folios that could be migrated.
Similar to (3), especially with MPOL_MF_MOVE_ALL, so this is not
expected to matter in practice.
Note that cpuset_migrate_mm_workfn() calls do_migrate_pages() with
MPOL_MF_MOVE_ALL.
(5) NUMA hinting
mm/migrate.c:migrate_misplaced_folio_prepare() will skip file
folios that are probably shared libraries (-> "mapped shared" and
executable). This check would have detected it as a shared library at
some point (at least 3 MMs mapping it), so detecting it afterwards
does not sound wrong (still a shared library). Not expected to
matter.
mm/memory.c:numa_migrate_check() will indicate TNF_SHARED in
MAP_SHARED file mappings when encountering a shared folio. Similar
reasoning, not expected to matter.
mm/mprotect.c:change_pte_range() will skip folios detected as
shared in CoW mappings. Similarly, this is not expected to matter in
practice, but if it would ever be a problem we could relax that check
a bit (e.g., basing it on the average page-mapcount in a folio),
because it was only an optimization when many (e.g., 288) processes
were mapping the same folios -- see commit 859d4adc3415 ("mm: numa: do
not trap faults on shared data section pages.")
(6) mm/rmap.c:folio_referenced_one() will skip exclusive swapbacked
folios in dying processes. Applies to anonymous folios only. Without
"false negatives", we'll now skip all actually shared ones. Skipping
ones that are actually exclusive won't really matter, it's a pure
optimization, and is not expected to matter in practice.
In theory, one can detect the problematic scenario: folio_mapcount() > 0
and no folio MM slot is occupied ("state unknown"). One could reset the
MM slots while doing an rmap walk, which migration / folio split already
do when setting everything up. Further, when batching PTEs we might
naturally learn about a owner (e.g., folio_mapcount() == nr_ptes) and
could update the owner. However, we'll defer that until the scenarios
where it would really matter are clear.
Link: https://lkml.kernel.org/r/20250303163014.1128035-15-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andy Lutomirks^H^Hski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michal Koutn <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: tejun heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-03 17:30:07 +01:00
|
|
|
|
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk
Let's use folio_walk instead, so we can avoid taking a folio reference
when we won't even be trying to migrate the folio and to get rid of
another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return
"-EFAULT" for it as documented.
We now perform the folio_likely_mapped_shared() check under PTL, which is
what we want: relying on the mapcount and friends after dropping the PTL
does not make too much sense, as the page can get unmapped concurrently
from this process.
Further, we perform the folio isolation under PTL, similar to how we
handle it for MADV_PAGEOUT.
The possible return values for follow_page() were confusing, especially
with FOLL_DUMP set. We'll handle it like documented in the man page:
* -EFAULT: This is a zero page or the memory area is not mapped by the
process.
* -ENOENT: The page is not present.
We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to
do, but it likely doesn't really matter (just like for weird devmap,
whereby we fake "not present").
The other errros are left as is, and match the documentation in the man
page.
While at it, rename add_page_for_migration() to add_folio_for_migration().
We'll lose the "secretmem" check, but that shouldn't really matter because
these folios cannot ever be migrated. Should vma_migratable() refuse
these VMAs? Maybe.
Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 17:55:17 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-01-13 14:16:07 +01:00
|
|
|
|
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk
Let's use folio_walk instead, so we can avoid taking a folio reference
when we won't even be trying to migrate the folio and to get rid of
another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return
"-EFAULT" for it as documented.
We now perform the folio_likely_mapped_shared() check under PTL, which is
what we want: relying on the mapcount and friends after dropping the PTL
does not make too much sense, as the page can get unmapped concurrently
from this process.
Further, we perform the folio isolation under PTL, similar to how we
handle it for MADV_PAGEOUT.
The possible return values for follow_page() were confusing, especially
with FOLL_DUMP set. We'll handle it like documented in the man page:
* -EFAULT: This is a zero page or the memory area is not mapped by the
process.
* -ENOENT: The page is not present.
We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to
do, but it likely doesn't really matter (just like for weird devmap,
whereby we fake "not present").
The other errros are left as is, and match the documentation in the man
page.
While at it, rename add_page_for_migration() to add_folio_for_migration().
We'll lose the "secretmem" check, but that shouldn't really matter because
these folios cannot ever be migrated. Should vma_migratable() refuse
these VMAs? Maybe.
Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 17:55:17 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk
Let's use folio_walk instead, so we can avoid taking a folio reference
when we won't even be trying to migrate the folio and to get rid of
another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return
"-EFAULT" for it as documented.
We now perform the folio_likely_mapped_shared() check under PTL, which is
what we want: relying on the mapcount and friends after dropping the PTL
does not make too much sense, as the page can get unmapped concurrently
from this process.
Further, we perform the folio isolation under PTL, similar to how we
handle it for MADV_PAGEOUT.
The possible return values for follow_page() were confusing, especially
with FOLL_DUMP set. We'll handle it like documented in the man page:
* -EFAULT: This is a zero page or the memory area is not mapped by the
process.
* -ENOENT: The page is not present.
We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to
do, but it likely doesn't really matter (just like for weird devmap,
whereby we fake "not present").
The other errros are left as is, and match the documentation in the man
page.
While at it, rename add_page_for_migration() to add_folio_for_migration().
We'll lose the "secretmem" check, but that shouldn't really matter because
these folios cannot ever be migrated. Should vma_migratable() refuse
these VMAs? Maybe.
Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 17:55:17 +02:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-04 12:59:46 -08:00
|
|
|
|
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk
Let's use folio_walk instead, so we can avoid taking a folio reference
when we won't even be trying to migrate the folio and to get rid of
another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return
"-EFAULT" for it as documented.
We now perform the folio_likely_mapped_shared() check under PTL, which is
what we want: relying on the mapcount and friends after dropping the PTL
does not make too much sense, as the page can get unmapped concurrently
from this process.
Further, we perform the folio isolation under PTL, similar to how we
handle it for MADV_PAGEOUT.
The possible return values for follow_page() were confusing, especially
with FOLL_DUMP set. We'll handle it like documented in the man page:
* -EFAULT: This is a zero page or the memory area is not mapped by the
process.
* -ENOENT: The page is not present.
We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to
do, but it likely doesn't really matter (just like for weird devmap,
whereby we fake "not present").
The other errros are left as is, and match the documentation in the man
page.
While at it, rename add_page_for_migration() to add_folio_for_migration().
We'll lose the "secretmem" check, but that shouldn't really matter because
these folios cannot ever be migrated. Should vma_migratable() refuse
these VMAs? Maybe.
Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 17:55:17 +02:00
|
|
|
|
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-04 12:59:46 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk
Let's use folio_walk instead, so we can avoid taking a folio reference
when we won't even be trying to migrate the folio and to get rid of
another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return
"-EFAULT" for it as documented.
We now perform the folio_likely_mapped_shared() check under PTL, which is
what we want: relying on the mapcount and friends after dropping the PTL
does not make too much sense, as the page can get unmapped concurrently
from this process.
Further, we perform the folio isolation under PTL, similar to how we
handle it for MADV_PAGEOUT.
The possible return values for follow_page() were confusing, especially
with FOLL_DUMP set. We'll handle it like documented in the man page:
* -EFAULT: This is a zero page or the memory area is not mapped by the
process.
* -ENOENT: The page is not present.
We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to
do, but it likely doesn't really matter (just like for weird devmap,
whereby we fake "not present").
The other errros are left as is, and match the documentation in the man
page.
While at it, rename add_page_for_migration() to add_folio_for_migration().
We'll lose the "secretmem" check, but that shouldn't really matter because
these folios cannot ever be migrated. Should vma_migratable() refuse
these VMAs? Maybe.
Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 17:55:17 +02:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk
Let's use folio_walk instead, so we can avoid taking a folio reference
when we won't even be trying to migrate the folio and to get rid of
another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return
"-EFAULT" for it as documented.
We now perform the folio_likely_mapped_shared() check under PTL, which is
what we want: relying on the mapcount and friends after dropping the PTL
does not make too much sense, as the page can get unmapped concurrently
from this process.
Further, we perform the folio isolation under PTL, similar to how we
handle it for MADV_PAGEOUT.
The possible return values for follow_page() were confusing, especially
with FOLL_DUMP set. We'll handle it like documented in the man page:
* -EFAULT: This is a zero page or the memory area is not mapped by the
process.
* -ENOENT: The page is not present.
We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to
do, but it likely doesn't really matter (just like for weird devmap,
whereby we fake "not present").
The other errros are left as is, and match the documentation in the man
page.
While at it, rename add_page_for_migration() to add_folio_for_migration().
We'll lose the "secretmem" check, but that shouldn't really matter because
these folios cannot ever be migrated. Should vma_migratable() refuse
these VMAs? Maybe.
Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 17:55:17 +02:00
|
|
|
|
2023-09-13 17:51:29 +08:00
|
|
|
|
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk
Let's use folio_walk instead, so we can avoid taking a folio reference
when we won't even be trying to migrate the folio and to get rid of
another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return
"-EFAULT" for it as documented.
We now perform the folio_likely_mapped_shared() check under PTL, which is
what we want: relying on the mapcount and friends after dropping the PTL
does not make too much sense, as the page can get unmapped concurrently
from this process.
Further, we perform the folio isolation under PTL, similar to how we
handle it for MADV_PAGEOUT.
The possible return values for follow_page() were confusing, especially
with FOLL_DUMP set. We'll handle it like documented in the man page:
* -EFAULT: This is a zero page or the memory area is not mapped by the
process.
* -ENOENT: The page is not present.
We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to
do, but it likely doesn't really matter (just like for weird devmap,
whereby we fake "not present").
The other errros are left as is, and match the documentation in the man
page.
While at it, rename add_page_for_migration() to add_folio_for_migration().
We'll lose the "secretmem" check, but that shouldn't really matter because
these folios cannot ever be migrated. Should vma_migratable() refuse
these VMAs? Maybe.
Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 17:55:17 +02:00
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
2020-06-08 21:33:25 -07:00
|
|
|
|
2023-03-12 14:26:00 +03:00
|
|
|
|
|
|
|
|
|
2022-04-28 23:16:07 -07:00
|
|
|
|
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk
Let's use folio_walk instead, so we can avoid taking a folio reference
when we won't even be trying to migrate the folio and to get rid of
another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return
"-EFAULT" for it as documented.
We now perform the folio_likely_mapped_shared() check under PTL, which is
what we want: relying on the mapcount and friends after dropping the PTL
does not make too much sense, as the page can get unmapped concurrently
from this process.
Further, we perform the folio isolation under PTL, similar to how we
handle it for MADV_PAGEOUT.
The possible return values for follow_page() were confusing, especially
with FOLL_DUMP set. We'll handle it like documented in the man page:
* -EFAULT: This is a zero page or the memory area is not mapped by the
process.
* -ENOENT: The page is not present.
We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to
do, but it likely doesn't really matter (just like for weird devmap,
whereby we fake "not present").
The other errros are left as is, and match the documentation in the man
page.
While at it, rename add_page_for_migration() to add_folio_for_migration().
We'll lose the "secretmem" check, but that shouldn't really matter because
these folios cannot ever be migrated. Should vma_migratable() refuse
these VMAs? Maybe.
Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 17:55:17 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
2020-06-08 21:33:25 -07:00
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-03 10:48:57 -04:00
|
|
|
|
2020-04-06 20:04:12 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-04-06 20:04:15 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-03 10:48:57 -04:00
|
|
|
|
2020-04-06 20:04:12 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-12-14 19:12:52 -08:00
|
|
|
|
2020-04-06 20:04:12 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
migrate: fix syscall move_pages() return value for failure
Patch series "migrate_pages(): fix several bugs in error path", v3.
During review the code of migrate_pages() and build a test program for
it. Several bugs in error path are identified and fixed in this
series.
Most patches are tested via
- Apply error-inject.patch in Linux kernel
- Compile test-migrate.c (with -lnuma)
- Test with test-migrate.sh
error-inject.patch, test-migrate.c, and test-migrate.sh are as below.
It turns out that error injection is an important tool to fix bugs in
error path.
This patch (of 8):
The return value of move_pages() syscall is incorrect when counting
the remaining pages to be migrated. For example, for the following
test program,
"
#define _GNU_SOURCE
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/uio.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <unistd.h>
#include <numaif.h>
#include <numa.h>
#ifndef MADV_FREE
#define MADV_FREE 8 /* free pages only if memory pressure */
#endif
#define ONE_MB (1024 * 1024)
#define MAP_SIZE (16 * ONE_MB)
#define THP_SIZE (2 * ONE_MB)
#define THP_MASK (THP_SIZE - 1)
#define ERR_EXIT_ON(cond, msg) \
do { \
int __cond_in_macro = (cond); \
if (__cond_in_macro) \
error_exit(__cond_in_macro, (msg)); \
} while (0)
void error_msg(int ret, int nr, int *status, const char *msg)
{
int i;
fprintf(stderr, "Error: %s, ret : %d, error: %s\n",
msg, ret, strerror(errno));
if (!nr)
return;
fprintf(stderr, "status: ");
for (i = 0; i < nr; i++)
fprintf(stderr, "%d ", status[i]);
fprintf(stderr, "\n");
}
void error_exit(int ret, const char *msg)
{
error_msg(ret, 0, NULL, msg);
exit(1);
}
int page_size;
bool do_vmsplice;
bool do_thp;
static int pipe_fds[2];
void *addr;
char *pn;
char *pn1;
void *pages[2];
int status[2];
void prepare()
{
int ret;
struct iovec iov;
if (addr) {
munmap(addr, MAP_SIZE);
close(pipe_fds[0]);
close(pipe_fds[1]);
}
ret = pipe(pipe_fds);
ERR_EXIT_ON(ret, "pipe");
addr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
ERR_EXIT_ON(addr == MAP_FAILED, "mmap");
if (do_thp) {
ret = madvise(addr, MAP_SIZE, MADV_HUGEPAGE);
ERR_EXIT_ON(ret, "advise hugepage");
}
pn = (char *)(((unsigned long)addr + THP_SIZE) & ~THP_MASK);
pn1 = pn + THP_SIZE;
pages[0] = pn;
pages[1] = pn1;
*pn = 1;
if (do_vmsplice) {
iov.iov_base = pn;
iov.iov_len = page_size;
ret = vmsplice(pipe_fds[1], &iov, 1, 0);
ERR_EXIT_ON(ret < 0, "vmsplice");
}
status[0] = status[1] = 1024;
}
void test_migrate()
{
int ret;
int nodes[2] = { 1, 1 };
pid_t pid = getpid();
prepare();
ret = move_pages(pid, 1, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 1, status, "move 1 page");
prepare();
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 not mapped");
prepare();
*pn1 = 1;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages");
prepare();
*pn1 = 1;
nodes[1] = 0;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 to node 0");
}
int main(int argc, char *argv[])
{
numa_run_on_node(0);
page_size = getpagesize();
test_migrate();
fprintf(stderr, "\nMake page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
fprintf(stderr, "\nTest THP:\n");
do_thp = true;
do_vmsplice = false;
test_migrate();
fprintf(stderr, "\nTHP: make page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
return 0;
}
"
The output of the current kernel is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 0, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 0, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 1, error: Success
status: 1024 1024
"
While the expected output is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 1, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 1, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 2, error: Success
status: 1024 1024
"
Fix this via correcting the remaining pages counting. With the fix,
the output for the test program as above is expected.
Link: https://lkml.kernel.org/r/20220817081408.513338-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220817081408.513338-2-ying.huang@intel.com
Fixes: 5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-17 16:14:01 +08:00
|
|
|
|
2020-04-06 20:04:12 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2008-10-18 20:27:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-03-21 16:34:06 -07:00
|
|
|
|
2008-10-18 20:27:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-03 10:48:56 -04:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-06-16 15:32:43 -07:00
|
|
|
|
2021-05-04 18:36:57 -07:00
|
|
|
|
2009-06-16 15:32:43 -07:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-01-06 14:38:57 -08:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
2023-10-03 10:48:56 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2008-10-18 20:27:17 -07:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-10-03 10:48:57 -04:00
|
|
|
|
2020-04-06 20:04:12 -07:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-01-06 14:38:57 -08:00
|
|
|
|
|
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm/migrate: convert add_page_for_migration() from follow_page() to folio_walk
Let's use folio_walk instead, so we can avoid taking a folio reference
when we won't even be trying to migrate the folio and to get rid of
another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return
"-EFAULT" for it as documented.
We now perform the folio_likely_mapped_shared() check under PTL, which is
what we want: relying on the mapcount and friends after dropping the PTL
does not make too much sense, as the page can get unmapped concurrently
from this process.
Further, we perform the folio isolation under PTL, similar to how we
handle it for MADV_PAGEOUT.
The possible return values for follow_page() were confusing, especially
with FOLL_DUMP set. We'll handle it like documented in the man page:
* -EFAULT: This is a zero page or the memory area is not mapped by the
process.
* -ENOENT: The page is not present.
We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to
do, but it likely doesn't really matter (just like for weird devmap,
whereby we fake "not present").
The other errros are left as is, and match the documentation in the man
page.
While at it, rename add_page_for_migration() to add_folio_for_migration().
We'll lose the "secretmem" check, but that shouldn't really matter because
these folios cannot ever be migrated. Should vma_migratable() refuse
these VMAs? Maybe.
Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 17:55:17 +02:00
|
|
|
|
|
|
|
|
|
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-04 12:59:46 -08:00
|
|
|
|
2020-04-06 20:04:18 -07:00
|
|
|
|
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-04 12:59:46 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-01-06 14:38:57 -08:00
|
|
|
|
2020-04-06 20:04:18 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
|
|
|
|
|
2008-10-18 20:27:17 -07:00
|
|
|
|
2023-10-03 10:48:57 -04:00
|
|
|
|
2020-04-06 20:04:12 -07:00
|
|
|
|
migrate: fix syscall move_pages() return value for failure
Patch series "migrate_pages(): fix several bugs in error path", v3.
During review the code of migrate_pages() and build a test program for
it. Several bugs in error path are identified and fixed in this
series.
Most patches are tested via
- Apply error-inject.patch in Linux kernel
- Compile test-migrate.c (with -lnuma)
- Test with test-migrate.sh
error-inject.patch, test-migrate.c, and test-migrate.sh are as below.
It turns out that error injection is an important tool to fix bugs in
error path.
This patch (of 8):
The return value of move_pages() syscall is incorrect when counting
the remaining pages to be migrated. For example, for the following
test program,
"
#define _GNU_SOURCE
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/uio.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <unistd.h>
#include <numaif.h>
#include <numa.h>
#ifndef MADV_FREE
#define MADV_FREE 8 /* free pages only if memory pressure */
#endif
#define ONE_MB (1024 * 1024)
#define MAP_SIZE (16 * ONE_MB)
#define THP_SIZE (2 * ONE_MB)
#define THP_MASK (THP_SIZE - 1)
#define ERR_EXIT_ON(cond, msg) \
do { \
int __cond_in_macro = (cond); \
if (__cond_in_macro) \
error_exit(__cond_in_macro, (msg)); \
} while (0)
void error_msg(int ret, int nr, int *status, const char *msg)
{
int i;
fprintf(stderr, "Error: %s, ret : %d, error: %s\n",
msg, ret, strerror(errno));
if (!nr)
return;
fprintf(stderr, "status: ");
for (i = 0; i < nr; i++)
fprintf(stderr, "%d ", status[i]);
fprintf(stderr, "\n");
}
void error_exit(int ret, const char *msg)
{
error_msg(ret, 0, NULL, msg);
exit(1);
}
int page_size;
bool do_vmsplice;
bool do_thp;
static int pipe_fds[2];
void *addr;
char *pn;
char *pn1;
void *pages[2];
int status[2];
void prepare()
{
int ret;
struct iovec iov;
if (addr) {
munmap(addr, MAP_SIZE);
close(pipe_fds[0]);
close(pipe_fds[1]);
}
ret = pipe(pipe_fds);
ERR_EXIT_ON(ret, "pipe");
addr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
ERR_EXIT_ON(addr == MAP_FAILED, "mmap");
if (do_thp) {
ret = madvise(addr, MAP_SIZE, MADV_HUGEPAGE);
ERR_EXIT_ON(ret, "advise hugepage");
}
pn = (char *)(((unsigned long)addr + THP_SIZE) & ~THP_MASK);
pn1 = pn + THP_SIZE;
pages[0] = pn;
pages[1] = pn1;
*pn = 1;
if (do_vmsplice) {
iov.iov_base = pn;
iov.iov_len = page_size;
ret = vmsplice(pipe_fds[1], &iov, 1, 0);
ERR_EXIT_ON(ret < 0, "vmsplice");
}
status[0] = status[1] = 1024;
}
void test_migrate()
{
int ret;
int nodes[2] = { 1, 1 };
pid_t pid = getpid();
prepare();
ret = move_pages(pid, 1, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 1, status, "move 1 page");
prepare();
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 not mapped");
prepare();
*pn1 = 1;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages");
prepare();
*pn1 = 1;
nodes[1] = 0;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 to node 0");
}
int main(int argc, char *argv[])
{
numa_run_on_node(0);
page_size = getpagesize();
test_migrate();
fprintf(stderr, "\nMake page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
fprintf(stderr, "\nTest THP:\n");
do_thp = true;
do_vmsplice = false;
test_migrate();
fprintf(stderr, "\nTHP: make page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
return 0;
}
"
The output of the current kernel is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 0, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 0, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 1, error: Success
status: 1024 1024
"
While the expected output is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 1, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 1, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 2, error: Success
status: 1024 1024
"
Fix this via correcting the remaining pages counting. With the fix,
the output for the test program as above is expected.
Link: https://lkml.kernel.org/r/20220817081408.513338-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220817081408.513338-2-ying.huang@intel.com
Fixes: 5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-17 16:14:01 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-04-06 20:04:09 -07:00
|
|
|
|
migrate: fix syscall move_pages() return value for failure
Patch series "migrate_pages(): fix several bugs in error path", v3.
During review the code of migrate_pages() and build a test program for
it. Several bugs in error path are identified and fixed in this
series.
Most patches are tested via
- Apply error-inject.patch in Linux kernel
- Compile test-migrate.c (with -lnuma)
- Test with test-migrate.sh
error-inject.patch, test-migrate.c, and test-migrate.sh are as below.
It turns out that error injection is an important tool to fix bugs in
error path.
This patch (of 8):
The return value of move_pages() syscall is incorrect when counting
the remaining pages to be migrated. For example, for the following
test program,
"
#define _GNU_SOURCE
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/uio.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <unistd.h>
#include <numaif.h>
#include <numa.h>
#ifndef MADV_FREE
#define MADV_FREE 8 /* free pages only if memory pressure */
#endif
#define ONE_MB (1024 * 1024)
#define MAP_SIZE (16 * ONE_MB)
#define THP_SIZE (2 * ONE_MB)
#define THP_MASK (THP_SIZE - 1)
#define ERR_EXIT_ON(cond, msg) \
do { \
int __cond_in_macro = (cond); \
if (__cond_in_macro) \
error_exit(__cond_in_macro, (msg)); \
} while (0)
void error_msg(int ret, int nr, int *status, const char *msg)
{
int i;
fprintf(stderr, "Error: %s, ret : %d, error: %s\n",
msg, ret, strerror(errno));
if (!nr)
return;
fprintf(stderr, "status: ");
for (i = 0; i < nr; i++)
fprintf(stderr, "%d ", status[i]);
fprintf(stderr, "\n");
}
void error_exit(int ret, const char *msg)
{
error_msg(ret, 0, NULL, msg);
exit(1);
}
int page_size;
bool do_vmsplice;
bool do_thp;
static int pipe_fds[2];
void *addr;
char *pn;
char *pn1;
void *pages[2];
int status[2];
void prepare()
{
int ret;
struct iovec iov;
if (addr) {
munmap(addr, MAP_SIZE);
close(pipe_fds[0]);
close(pipe_fds[1]);
}
ret = pipe(pipe_fds);
ERR_EXIT_ON(ret, "pipe");
addr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
ERR_EXIT_ON(addr == MAP_FAILED, "mmap");
if (do_thp) {
ret = madvise(addr, MAP_SIZE, MADV_HUGEPAGE);
ERR_EXIT_ON(ret, "advise hugepage");
}
pn = (char *)(((unsigned long)addr + THP_SIZE) & ~THP_MASK);
pn1 = pn + THP_SIZE;
pages[0] = pn;
pages[1] = pn1;
*pn = 1;
if (do_vmsplice) {
iov.iov_base = pn;
iov.iov_len = page_size;
ret = vmsplice(pipe_fds[1], &iov, 1, 0);
ERR_EXIT_ON(ret < 0, "vmsplice");
}
status[0] = status[1] = 1024;
}
void test_migrate()
{
int ret;
int nodes[2] = { 1, 1 };
pid_t pid = getpid();
prepare();
ret = move_pages(pid, 1, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 1, status, "move 1 page");
prepare();
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 not mapped");
prepare();
*pn1 = 1;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages");
prepare();
*pn1 = 1;
nodes[1] = 0;
ret = move_pages(pid, 2, pages, nodes, status, MPOL_MF_MOVE_ALL);
error_msg(ret, 2, status, "move 2 pages, page 1 to node 0");
}
int main(int argc, char *argv[])
{
numa_run_on_node(0);
page_size = getpagesize();
test_migrate();
fprintf(stderr, "\nMake page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
fprintf(stderr, "\nTest THP:\n");
do_thp = true;
do_vmsplice = false;
test_migrate();
fprintf(stderr, "\nTHP: make page 0 cannot be migrated:\n");
do_vmsplice = true;
test_migrate();
return 0;
}
"
The output of the current kernel is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 0, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 0, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 1, error: Success
status: 1024 1024
"
While the expected output is,
"
Error: move 1 page, ret : 0, error: Success
status: 1
Error: move 2 pages, page 1 not mapped, ret : 0, error: Success
status: 1 -14
Error: move 2 pages, ret : 0, error: Success
status: 1 1
Error: move 2 pages, page 1 to node 0, ret : 0, error: Success
status: 1 0
Make page 0 cannot be migrated:
Error: move 1 page, ret : 1, error: Success
status: 1024
Error: move 2 pages, page 1 not mapped, ret : 1, error: Success
status: 1024 -14
Error: move 2 pages, ret : 1, error: Success
status: 1024 1024
Error: move 2 pages, page 1 to node 0, ret : 2, error: Success
status: 1024 1024
"
Fix this via correcting the remaining pages counting. With the fix,
the output for the test program as above is expected.
Link: https://lkml.kernel.org/r/20220817081408.513338-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220817081408.513338-2-ying.huang@intel.com
Fixes: 5984fabb6e82 ("mm: move_pages: report the number of non-attempted pages")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-17 16:14:01 +08:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
2009-01-06 14:38:57 -08:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
|
|
|
|
|
2023-10-03 10:48:57 -04:00
|
|
|
|
2020-04-06 20:04:12 -07:00
|
|
|
|
2020-01-30 22:11:14 -08:00
|
|
|
|
2018-04-10 16:29:59 -07:00
|
|
|
|
2008-10-18 20:27:17 -07:00
|
|
|
|
2021-05-04 18:36:57 -07:00
|
|
|
|
2008-10-18 20:27:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
2008-10-18 20:27:16 -07:00
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
2008-12-09 13:14:23 -08:00
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
2008-10-18 20:27:16 -07:00
|
|
|
|
|
|
|
|
|
2020-06-08 21:33:25 -07:00
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
2008-10-18 20:27:16 -07:00
|
|
|
|
2008-12-09 13:14:23 -08:00
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
mm/migrate: convert do_pages_stat_array() from follow_page() to folio_walk
Let's use folio_walk instead, so we can avoid taking a folio reference
just to read the nid and get rid of another follow_page()/FOLL_DUMP user.
Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented.
The possible return values for follow_page() were confusing, especially
with FOLL_DUMP set. We'll handle it like documented in the man page:
* -EFAULT: This is a zero page or the memory area is not mapped by the
process.
* -ENOENT: The page is not present.
We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to
do, but it likely doesn't really matter (just like for weird devmap,
whereby we fake "not present").
Note that the other errors (-EACCESS, -EBUSY, -EIO, -EINVAL, -ENOMEM) so
far only applied when actually moving pages, not when only querying stats.
We'll effectively drop the "secretmem" check we had in follow_page(), but
that shouldn't really matter here, we're not accessing folio/page content
after all.
Link: https://lkml.kernel.org/r/20240802155524.517137-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 17:55:16 +02:00
|
|
|
|
|
|
|
|
|
2008-12-16 16:06:43 +09:00
|
|
|
|
2008-10-18 20:27:16 -07:00
|
|
|
|
2021-06-28 19:39:44 -07:00
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
|
|
|
|
|
mm/migrate: convert do_pages_stat_array() from follow_page() to folio_walk
Let's use folio_walk instead, so we can avoid taking a folio reference
just to read the nid and get rid of another follow_page()/FOLL_DUMP user.
Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented.
The possible return values for follow_page() were confusing, especially
with FOLL_DUMP set. We'll handle it like documented in the man page:
* -EFAULT: This is a zero page or the memory area is not mapped by the
process.
* -ENOENT: The page is not present.
We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to
do, but it likely doesn't really matter (just like for weird devmap,
whereby we fake "not present").
Note that the other errors (-EACCESS, -EBUSY, -EIO, -EINVAL, -ENOMEM) so
far only applied when actually moving pages, not when only querying stats.
We'll effectively drop the "secretmem" check we had in follow_page(), but
that shouldn't really matter here, we're not accessing folio/page content
after all.
Link: https://lkml.kernel.org/r/20240802155524.517137-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-02 17:55:16 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
2008-12-09 13:14:23 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-06-08 21:33:25 -07:00
|
|
|
|
2008-12-09 13:14:23 -08:00
|
|
|
|
|
|
|
|
|
2021-09-08 15:18:17 -07:00
|
|
|
|
|
|
|
|
|
2025-06-24 16:44:27 +02:00
|
|
|
|
2021-09-08 15:18:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-06-24 16:44:27 +02:00
|
|
|
|
2021-09-08 15:18:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2008-12-09 13:14:23 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-04-28 23:16:07 -07:00
|
|
|
|
2008-12-09 13:14:23 -08:00
|
|
|
|
|
|
|
|
|
2025-06-24 16:44:27 +02:00
|
|
|
|
2008-12-09 13:14:23 -08:00
|
|
|
|
2010-02-18 16:13:40 -08:00
|
|
|
|
2022-04-28 23:16:07 -07:00
|
|
|
|
2010-02-18 16:13:40 -08:00
|
|
|
|
2021-09-08 15:18:17 -07:00
|
|
|
|
|
|
|
|
|
2025-06-24 16:44:27 +02:00
|
|
|
|
2021-09-08 15:18:17 -07:00
|
|
|
|
|
|
|
|
|
2025-06-24 16:44:27 +02:00
|
|
|
|
2021-09-08 15:18:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2008-12-09 13:14:23 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-06-24 16:44:27 +02:00
|
|
|
|
|
|
|
|
|
2010-02-18 16:13:40 -08:00
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
2025-06-24 16:44:27 +02:00
|
|
|
|
2010-02-18 16:13:40 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
|
|
|
|
|
2020-10-17 16:14:03 -07:00
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-10-17 16:14:03 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
2024-09-05 23:31:18 +08:00
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
2020-10-17 16:14:03 -07:00
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-08-20 13:26:27 -07:00
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
2017-08-20 13:26:27 -07:00
|
|
|
|
2020-10-17 16:14:03 -07:00
|
|
|
|
2008-10-18 20:27:17 -07:00
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
|
|
|
|
|
2020-10-17 16:14:03 -07:00
|
|
|
|
|
|
|
|
|
2008-10-18 20:27:17 -07:00
|
|
|
|
2020-10-17 16:14:03 -07:00
|
|
|
|
2012-03-21 16:34:06 -07:00
|
|
|
|
2020-10-17 16:14:03 -07:00
|
|
|
|
2012-03-21 16:34:06 -07:00
|
|
|
|
2012-04-25 16:01:53 -07:00
|
|
|
|
2020-10-17 16:14:03 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-04-25 16:01:53 -07:00
|
|
|
|
|
|
|
|
|
2020-10-17 16:14:03 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-04-25 16:01:53 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-06-23 02:03:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-03-17 16:08:03 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-10-25 14:16:34 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-04-28 23:16:03 -07:00
|
|
|
|
2012-10-25 14:16:34 +02:00
|
|
|
|
|
|
|
|
|
2013-02-22 16:34:27 -08:00
|
|
|
|
2012-10-25 14:16:34 +02:00
|
|
|
|
|
|
|
|
|
2016-07-28 15:45:31 -07:00
|
|
|
|
2012-10-25 14:16:34 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-04-28 23:16:03 -07:00
|
|
|
|
2012-10-25 14:16:34 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-01 18:04:56 +00:00
|
|
|
|
2012-10-25 14:16:34 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2018-04-10 16:30:03 -07:00
|
|
|
|
2012-10-25 14:16:34 +02:00
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2021-07-06 10:50:39 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2021-06-30 18:51:42 -07:00
|
|
|
|
|
|
|
|
|
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 23:29:35 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-19 12:35:47 +00:00
|
|
|
|
2023-09-13 17:51:26 +08:00
|
|
|
|
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 23:29:35 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: convert folio_likely_mapped_shared() to folio_maybe_mapped_shared()
Let's reuse our new MM ownership tracking infrastructure for large folios
to make folio_likely_mapped_shared() never return false negatives -- never
indicating "not mapped shared" although the folio *is* mapped shared.
With that, we can rename it to folio_maybe_mapped_shared() and get rid of
the dependency on the mapcount of the first folio page.
The semantics are now arguably clearer: no mixture of "false negatives"
and "false positives", only the remaining possibility for "false
positives".
Thoroughly document the new semantics. We might now detect that a large
folio is "maybe mapped shared" although it *no longer* is -- but once was.
Now, if more than two MMs mapped a folio at the same time, and the MM
mapping the folio exclusively at the end is not one tracked in the two
folio MM slots, we will detect the folio as "maybe mapped shared".
For anonymous folios, usually (except weird corner cases) all PTEs that
target a "maybe mapped shared" folio are R/O. As soon as a child process
would write to them (iow, actively use them), we would CoW and effectively
replace these PTEs. Most cases (below) are not expected to really matter
with large anonymous folios for this reason.
Most importantly, there will be no change at all for:
* small folios
* hugetlb folios
* PMD-mapped PMD-sized THPs (single mapping)
This change has the potential to affect existing callers of
folio_likely_mapped_shared() -> folio_maybe_mapped_shared():
(1) fs/proc/task_mmu.c: no change (hugetlb)
(2) khugepaged counts PTEs that target shared folios towards
max_ptes_shared (default: HPAGE_PMD_NR / 2), meaning we could skip a
collapse where we would have previously collapsed. This only applies
to anonymous folios and is not expected to matter in practice.
Worth noting that this change sorts out case (A) documented in
commit 1bafe96e89f0 ("mm/khugepaged: replace page_mapcount() check by
folio_likely_mapped_shared()") by removing the possibility for "false
negatives".
(3) MADV_COLD / MADV_PAGEOUT / MADV_FREE will not try splitting
PTE-mapped THPs that are considered shared but not fully covered by
the requested range, consequently not processing them.
PMD-mapped PMD-sized THP are not affected, or when all PTEs are
covered. These functions are usually only called on anon/file folios
that are exclusively mapped most of the time (no other file mappings
or no fork()), so the "false negatives" are not expected to matter in
practice.
(4) mbind() / migrate_pages() / move_pages() will refuse to migrate
shared folios unless MPOL_MF_MOVE_ALL is effective (requires
CAP_SYS_NICE). We will now reject some folios that could be migrated.
Similar to (3), especially with MPOL_MF_MOVE_ALL, so this is not
expected to matter in practice.
Note that cpuset_migrate_mm_workfn() calls do_migrate_pages() with
MPOL_MF_MOVE_ALL.
(5) NUMA hinting
mm/migrate.c:migrate_misplaced_folio_prepare() will skip file
folios that are probably shared libraries (-> "mapped shared" and
executable). This check would have detected it as a shared library at
some point (at least 3 MMs mapping it), so detecting it afterwards
does not sound wrong (still a shared library). Not expected to
matter.
mm/memory.c:numa_migrate_check() will indicate TNF_SHARED in
MAP_SHARED file mappings when encountering a shared folio. Similar
reasoning, not expected to matter.
mm/mprotect.c:change_pte_range() will skip folios detected as
shared in CoW mappings. Similarly, this is not expected to matter in
practice, but if it would ever be a problem we could relax that check
a bit (e.g., basing it on the average page-mapcount in a folio),
because it was only an optimization when many (e.g., 288) processes
were mapping the same folios -- see commit 859d4adc3415 ("mm: numa: do
not trap faults on shared data section pages.")
(6) mm/rmap.c:folio_referenced_one() will skip exclusive swapbacked
folios in dying processes. Applies to anonymous folios only. Without
"false negatives", we'll now skip all actually shared ones. Skipping
ones that are actually exclusive won't really matter, it's a pure
optimization, and is not expected to matter in practice.
In theory, one can detect the problematic scenario: folio_mapcount() > 0
and no folio MM slot is occupied ("state unknown"). One could reset the
MM slots while doing an rmap walk, which migration / folio split already
do when setting everything up. Further, when batching PTEs we might
naturally learn about a owner (e.g., folio_mapcount() == nr_ptes) and
could update the owner. However, we'll defer that until the scenarios
where it would really matter are clear.
Link: https://lkml.kernel.org/r/20250303163014.1128035-15-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andy Lutomirks^H^Hski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michal Koutn <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: tejun heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-03 17:30:07 +01:00
|
|
|
|
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 23:29:35 +02:00
|
|
|
|
|
|
|
|
|
mm: convert folio_likely_mapped_shared() to folio_maybe_mapped_shared()
Let's reuse our new MM ownership tracking infrastructure for large folios
to make folio_likely_mapped_shared() never return false negatives -- never
indicating "not mapped shared" although the folio *is* mapped shared.
With that, we can rename it to folio_maybe_mapped_shared() and get rid of
the dependency on the mapcount of the first folio page.
The semantics are now arguably clearer: no mixture of "false negatives"
and "false positives", only the remaining possibility for "false
positives".
Thoroughly document the new semantics. We might now detect that a large
folio is "maybe mapped shared" although it *no longer* is -- but once was.
Now, if more than two MMs mapped a folio at the same time, and the MM
mapping the folio exclusively at the end is not one tracked in the two
folio MM slots, we will detect the folio as "maybe mapped shared".
For anonymous folios, usually (except weird corner cases) all PTEs that
target a "maybe mapped shared" folio are R/O. As soon as a child process
would write to them (iow, actively use them), we would CoW and effectively
replace these PTEs. Most cases (below) are not expected to really matter
with large anonymous folios for this reason.
Most importantly, there will be no change at all for:
* small folios
* hugetlb folios
* PMD-mapped PMD-sized THPs (single mapping)
This change has the potential to affect existing callers of
folio_likely_mapped_shared() -> folio_maybe_mapped_shared():
(1) fs/proc/task_mmu.c: no change (hugetlb)
(2) khugepaged counts PTEs that target shared folios towards
max_ptes_shared (default: HPAGE_PMD_NR / 2), meaning we could skip a
collapse where we would have previously collapsed. This only applies
to anonymous folios and is not expected to matter in practice.
Worth noting that this change sorts out case (A) documented in
commit 1bafe96e89f0 ("mm/khugepaged: replace page_mapcount() check by
folio_likely_mapped_shared()") by removing the possibility for "false
negatives".
(3) MADV_COLD / MADV_PAGEOUT / MADV_FREE will not try splitting
PTE-mapped THPs that are considered shared but not fully covered by
the requested range, consequently not processing them.
PMD-mapped PMD-sized THP are not affected, or when all PTEs are
covered. These functions are usually only called on anon/file folios
that are exclusively mapped most of the time (no other file mappings
or no fork()), so the "false negatives" are not expected to matter in
practice.
(4) mbind() / migrate_pages() / move_pages() will refuse to migrate
shared folios unless MPOL_MF_MOVE_ALL is effective (requires
CAP_SYS_NICE). We will now reject some folios that could be migrated.
Similar to (3), especially with MPOL_MF_MOVE_ALL, so this is not
expected to matter in practice.
Note that cpuset_migrate_mm_workfn() calls do_migrate_pages() with
MPOL_MF_MOVE_ALL.
(5) NUMA hinting
mm/migrate.c:migrate_misplaced_folio_prepare() will skip file
folios that are probably shared libraries (-> "mapped shared" and
executable). This check would have detected it as a shared library at
some point (at least 3 MMs mapping it), so detecting it afterwards
does not sound wrong (still a shared library). Not expected to
matter.
mm/memory.c:numa_migrate_check() will indicate TNF_SHARED in
MAP_SHARED file mappings when encountering a shared folio. Similar
reasoning, not expected to matter.
mm/mprotect.c:change_pte_range() will skip folios detected as
shared in CoW mappings. Similarly, this is not expected to matter in
practice, but if it would ever be a problem we could relax that check
a bit (e.g., basing it on the average page-mapcount in a folio),
because it was only an optimization when many (e.g., 288) processes
were mapping the same folios -- see commit 859d4adc3415 ("mm: numa: do
not trap faults on shared data section pages.")
(6) mm/rmap.c:folio_referenced_one() will skip exclusive swapbacked
folios in dying processes. Applies to anonymous folios only. Without
"false negatives", we'll now skip all actually shared ones. Skipping
ones that are actually exclusive won't really matter, it's a pure
optimization, and is not expected to matter in practice.
In theory, one can detect the problematic scenario: folio_mapcount() > 0
and no folio MM slot is occupied ("state unknown"). One could reset the
MM slots while doing an rmap walk, which migration / folio split already
do when setting everything up. Further, when batching PTEs we might
naturally learn about a owner (e.g., folio_mapcount() == nr_ptes) and
could update the owner. However, we'll defer that until the scenarios
where it would really matter are clear.
Link: https://lkml.kernel.org/r/20250303163014.1128035-15-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andy Lutomirks^H^Hski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michal Koutn <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: tejun heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-03-03 17:30:07 +01:00
|
|
|
|
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 23:29:35 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-14 21:41:46 +00:00
|
|
|
|
2012-10-25 14:16:34 +02:00
|
|
|
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 14:46:23 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 23:29:35 +02:00
|
|
|
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 14:46:23 -07:00
|
|
|
|
2022-04-28 23:16:03 -07:00
|
|
|
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 14:46:23 -07:00
|
|
|
|
|
|
|
|
|
2024-02-16 20:15:02 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 23:29:35 +02:00
|
|
|
|
2024-02-16 20:15:02 +09:00
|
|
|
|
2023-09-13 17:51:26 +08:00
|
|
|
|
|
|
|
|
|
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 23:29:35 +02:00
|
|
|
|
NUMA balancing: optimize page placement for memory tiering system
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are usually
different.
In such system, because of the memory accessing pattern changing etc,
some pages in the slow memory may become hot globally. So in this
patch, the NUMA balancing mechanism is enhanced to optimize the page
placement among the different memory types according to hot/cold
dynamically.
In a typical memory tiering system, there are CPUs, fast memory and slow
memory in each physical NUMA node. The CPUs and the fast memory will be
put in one logical node (called fast memory node), while the slow memory
will be put in another (faked) logical node (called slow memory node).
That is, the fast memory is regarded as local while the slow memory is
regarded as remote. So it's possible for the recently accessed pages in
the slow memory node to be promoted to the fast memory node via the
existing NUMA balancing mechanism.
The original NUMA balancing mechanism will stop to migrate pages if the
free memory of the target node becomes below the high watermark. This
is a reasonable policy if there's only one memory type. But this makes
the original NUMA balancing mechanism almost do not work to optimize
page placement among different memory types. Details are as follows.
It's the common cases that the working-set size of the workload is
larger than the size of the fast memory nodes. Otherwise, it's
unnecessary to use the slow memory at all. So, there are almost always
no enough free pages in the fast memory nodes, so that the globally hot
pages in the slow memory node cannot be promoted to the fast memory
node. To solve the issue, we have 2 choices as follows,
a. Ignore the free pages watermark checking when promoting hot pages
from the slow memory node to the fast memory node. This will
create some memory pressure in the fast memory node, thus trigger
the memory reclaiming. So that, the cold pages in the fast memory
node will be demoted to the slow memory node.
b. Define a new watermark called wmark_promo which is higher than
wmark_high, and have kswapd reclaiming pages until free pages reach
such watermark. The scenario is as follows: when we want to promote
hot-pages from a slow memory to a fast memory, but fast memory's free
pages would go lower than high watermark with such promotion, we wake
up kswapd with wmark_promo watermark in order to demote cold pages and
free us up some space. So, next time we want to promote hot-pages we
might have a chance of doing so.
The choice "a" may create high memory pressure in the fast memory node.
If the memory pressure of the workload is high, the memory pressure
may become so high that the memory allocation latency of the workload
is influenced, e.g. the direct reclaiming may be triggered.
The choice "b" works much better at this aspect. If the memory
pressure of the workload is high, the hot pages promotion will stop
earlier because its allocation watermark is higher than that of the
normal memory allocation. So in this patch, choice "b" is implemented.
A new zone watermark (WMARK_PROMO) is added. Which is larger than the
high watermark and can be controlled via watermark_scale_factor.
In addition to the original page placement optimization among sockets,
the NUMA balancing mechanism is extended to be used to optimize page
placement according to hot/cold among different memory types. So the
sysctl user space interface (numa_balancing) is extended in a backward
compatible way as follow, so that the users can enable/disable these
functionality individually.
The sysctl is converted from a Boolean value to a bits field. The
definition of the flags is,
- 0: NUMA_BALANCING_DISABLED
- 1: NUMA_BALANCING_NORMAL
- 2: NUMA_BALANCING_MEMORY_TIERING
We have tested the patch with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent
Memory Model. The test results shows that the pmbench score can
improve up to 95.9%.
Thanks Andrew Morton to help fix the document format error.
Link: https://lkml.kernel.org/r/20220221084529.1052339-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 14:46:23 -07:00
|
|
|
|
2012-10-25 14:16:34 +02:00
|
|
|
|
2023-09-13 17:51:26 +08:00
|
|
|
|
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 23:29:35 +02:00
|
|
|
|
2012-10-25 14:16:34 +02:00
|
|
|
|
2023-09-13 17:51:26 +08:00
|
|
|
|
2021-09-08 15:18:01 -07:00
|
|
|
|
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 23:29:35 +02:00
|
|
|
|
2012-11-19 12:35:47 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-09-13 17:51:27 +08:00
|
|
|
|
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 23:29:35 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-11-19 12:35:47 +00:00
|
|
|
|
2024-11-26 09:56:54 -06:00
|
|
|
|
2012-11-19 12:35:47 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NUMA Balancing: add page promotion counter
Patch series "NUMA balancing: optimize memory placement for memory tiering system", v13
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are different.
After commit c221c0b0308f ("device-dax: "Hotplug" persistent memory for
use like normal RAM"), the PMEM could be used as the cost-effective
volatile memory in separate NUMA nodes. In a typical memory tiering
system, there are CPUs, DRAM and PMEM in each physical NUMA node. The
CPUs and the DRAM will be put in one logical node, while the PMEM will
be put in another (faked) logical node.
To optimize the system overall performance, the hot pages should be
placed in DRAM node. To do that, we need to identify the hot pages in
the PMEM node and migrate them to DRAM node via NUMA migration.
In the original NUMA balancing, there are already a set of existing
mechanisms to identify the pages recently accessed by the CPUs in a node
and migrate the pages to the node. So we can reuse these mechanisms to
build the mechanisms to optimize the page placement in the memory
tiering system. This is implemented in this patchset.
At the other hand, the cold pages should be placed in PMEM node. So, we
also need to identify the cold pages in the DRAM node and migrate them
to PMEM node.
In commit 26aa2d199d6f ("mm/migrate: demote pages during reclaim"), a
mechanism to demote the cold DRAM pages to PMEM node under memory
pressure is implemented. Based on that, the cold DRAM pages can be
demoted to PMEM node proactively to free some memory space on DRAM node
to accommodate the promoted hot PMEM pages. This is implemented in this
patchset too.
We have tested the solution with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent Memory
Model. The test results shows that the pmbench score can improve up to
95.9%.
This patch (of 3):
In a system with multiple memory types, e.g. DRAM and PMEM, the CPU
and DRAM in one socket will be put in one NUMA node as before, while
the PMEM will be put in another NUMA node as described in the
description of the commit c221c0b0308f ("device-dax: "Hotplug"
persistent memory for use like normal RAM"). So, the NUMA balancing
mechanism will identify all PMEM accesses as remote access and try to
promote the PMEM pages to DRAM.
To distinguish the number of the inter-type promoted pages from that of
the inter-socket migrated pages. A new vmstat count is added. The
counter is per-node (count in the target node). So this can be used to
identify promotion imbalance among the NUMA nodes.
Link: https://lkml.kernel.org/r/20220301085329.3210428-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 14:46:20 -07:00
|
|
|
|
2012-11-19 12:35:47 +00:00
|
|
|
|
mm,memcg: provide per-cgroup counters for NUMA balancing operations
The ability to observe the demotion and promotion decisions made by the
kernel on a per-cgroup basis is important for monitoring and tuning
containerized workloads on machines equipped with tiered memory.
Different containers in the system may experience drastically different
memory tiering actions that cannot be distinguished from the global
counters alone.
For example, a container running a workload that has a much hotter memory
accesses will likely see more promotions and fewer demotions, potentially
depriving a colocated container of top tier memory to such an extent that
its performance degrades unacceptably.
For another example, some containers may exhibit longer periods between
data reuse, causing much more numa_hint_faults than numa_pages_migrated.
In this case, tuning hot_threshold_ms may be appropriate, but the signal
can easily be lost if only global counters are available.
In the long term, we hope to introduce per-cgroup control of promotion and
demotion actions to implement memory placement policies in tiering.
This patch set adds seven counters to memory.stat in a cgroup:
numa_pages_migrated, numa_pte_updates, numa_hint_faults, pgdemote_kswapd,
pgdemote_khugepaged, pgdemote_direct and pgpromote_success. pgdemote_*
and pgpromote_success are also available in memory.numa_stat.
count_memcg_events_mm() is added to count multiple event occurrences at
once, and get_mem_cgroup_from_folio() is added because we need to get a
reference to the memcg of a folio before it's migrated to track
numa_pages_migrated. The accounting of PGDEMOTE_* is moved to
shrink_inactive_list() before being changed to per-cgroup.
[kaiyang2@cs.cmu.edu: add documentation of the memcg counters in cgroup-v2.rst]
Link: https://lkml.kernel.org/r/20240814235122.252309-1-kaiyang2@cs.cmu.edu
Link: https://lkml.kernel.org/r/20240814174227.30639-1-kaiyang2@cs.cmu.edu
Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Wei Xu <weixugc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-14 17:42:27 +00:00
|
|
|
|
|
|
|
|
|
2012-11-19 12:35:47 +00:00
|
|
|
|
2023-09-13 17:51:27 +08:00
|
|
|
|
2023-05-13 01:11:01 +01:00
|
|
|
|
2021-07-06 10:50:39 -04:00
|
|
|
|
|
|
|
|
|
2024-07-08 17:55:37 -04:00
|
|
|
|
|
|
|
|
|
NUMA Balancing: add page promotion counter
Patch series "NUMA balancing: optimize memory placement for memory tiering system", v13
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are different.
After commit c221c0b0308f ("device-dax: "Hotplug" persistent memory for
use like normal RAM"), the PMEM could be used as the cost-effective
volatile memory in separate NUMA nodes. In a typical memory tiering
system, there are CPUs, DRAM and PMEM in each physical NUMA node. The
CPUs and the DRAM will be put in one logical node, while the PMEM will
be put in another (faked) logical node.
To optimize the system overall performance, the hot pages should be
placed in DRAM node. To do that, we need to identify the hot pages in
the PMEM node and migrate them to DRAM node via NUMA migration.
In the original NUMA balancing, there are already a set of existing
mechanisms to identify the pages recently accessed by the CPUs in a node
and migrate the pages to the node. So we can reuse these mechanisms to
build the mechanisms to optimize the page placement in the memory
tiering system. This is implemented in this patchset.
At the other hand, the cold pages should be placed in PMEM node. So, we
also need to identify the cold pages in the DRAM node and migrate them
to PMEM node.
In commit 26aa2d199d6f ("mm/migrate: demote pages during reclaim"), a
mechanism to demote the cold DRAM pages to PMEM node under memory
pressure is implemented. Based on that, the cold DRAM pages can be
demoted to PMEM node proactively to free some memory space on DRAM node
to accommodate the promoted hot PMEM pages. This is implemented in this
patchset too.
We have tested the solution with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent Memory
Model. The test results shows that the pmbench score can improve up to
95.9%.
This patch (of 3):
In a system with multiple memory types, e.g. DRAM and PMEM, the CPU
and DRAM in one socket will be put in one NUMA node as before, while
the PMEM will be put in another NUMA node as described in the
description of the commit c221c0b0308f ("device-dax: "Hotplug"
persistent memory for use like normal RAM"). So, the NUMA balancing
mechanism will identify all PMEM accesses as remote access and try to
promote the PMEM pages to DRAM.
To distinguish the number of the inter-type promoted pages from that of
the inter-socket migrated pages. A new vmstat count is added. The
counter is per-node (count in the target node). So this can be used to
identify promotion imbalance among the NUMA nodes.
Link: https://lkml.kernel.org/r/20220301085329.3210428-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 14:46:20 -07:00
|
|
|
|
|
|
|
|
|
mm,memcg: provide per-cgroup counters for NUMA balancing operations
The ability to observe the demotion and promotion decisions made by the
kernel on a per-cgroup basis is important for monitoring and tuning
containerized workloads on machines equipped with tiered memory.
Different containers in the system may experience drastically different
memory tiering actions that cannot be distinguished from the global
counters alone.
For example, a container running a workload that has a much hotter memory
accesses will likely see more promotions and fewer demotions, potentially
depriving a colocated container of top tier memory to such an extent that
its performance degrades unacceptably.
For another example, some containers may exhibit longer periods between
data reuse, causing much more numa_hint_faults than numa_pages_migrated.
In this case, tuning hot_threshold_ms may be appropriate, but the signal
can easily be lost if only global counters are available.
In the long term, we hope to introduce per-cgroup control of promotion and
demotion actions to implement memory placement policies in tiering.
This patch set adds seven counters to memory.stat in a cgroup:
numa_pages_migrated, numa_pte_updates, numa_hint_faults, pgdemote_kswapd,
pgdemote_khugepaged, pgdemote_direct and pgpromote_success. pgdemote_*
and pgpromote_success are also available in memory.numa_stat.
count_memcg_events_mm() is added to count multiple event occurrences at
once, and get_mem_cgroup_from_folio() is added because we need to get a
reference to the memcg of a folio before it's migrated to track
numa_pages_migrated. The accounting of PGDEMOTE_* is moved to
shrink_inactive_list() before being changed to per-cgroup.
[kaiyang2@cs.cmu.edu: add documentation of the memcg counters in cgroup-v2.rst]
Link: https://lkml.kernel.org/r/20240814235122.252309-1-kaiyang2@cs.cmu.edu
Link: https://lkml.kernel.org/r/20240814174227.30639-1-kaiyang2@cs.cmu.edu
Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Wei Xu <weixugc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-14 17:42:27 +00:00
|
|
|
|
2024-07-24 09:01:15 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm,memcg: provide per-cgroup counters for NUMA balancing operations
The ability to observe the demotion and promotion decisions made by the
kernel on a per-cgroup basis is important for monitoring and tuning
containerized workloads on machines equipped with tiered memory.
Different containers in the system may experience drastically different
memory tiering actions that cannot be distinguished from the global
counters alone.
For example, a container running a workload that has a much hotter memory
accesses will likely see more promotions and fewer demotions, potentially
depriving a colocated container of top tier memory to such an extent that
its performance degrades unacceptably.
For another example, some containers may exhibit longer periods between
data reuse, causing much more numa_hint_faults than numa_pages_migrated.
In this case, tuning hot_threshold_ms may be appropriate, but the signal
can easily be lost if only global counters are available.
In the long term, we hope to introduce per-cgroup control of promotion and
demotion actions to implement memory placement policies in tiering.
This patch set adds seven counters to memory.stat in a cgroup:
numa_pages_migrated, numa_pte_updates, numa_hint_faults, pgdemote_kswapd,
pgdemote_khugepaged, pgdemote_direct and pgpromote_success. pgdemote_*
and pgpromote_success are also available in memory.numa_stat.
count_memcg_events_mm() is added to count multiple event occurrences at
once, and get_mem_cgroup_from_folio() is added because we need to get a
reference to the memcg of a folio before it's migrated to track
numa_pages_migrated. The accounting of PGDEMOTE_* is moved to
shrink_inactive_list() before being changed to per-cgroup.
[kaiyang2@cs.cmu.edu: add documentation of the memcg counters in cgroup-v2.rst]
Link: https://lkml.kernel.org/r/20240814235122.252309-1-kaiyang2@cs.cmu.edu
Link: https://lkml.kernel.org/r/20240814174227.30639-1-kaiyang2@cs.cmu.edu
Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Wei Xu <weixugc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-14 17:42:27 +00:00
|
|
|
|
NUMA Balancing: add page promotion counter
Patch series "NUMA balancing: optimize memory placement for memory tiering system", v13
With the advent of various new memory types, some machines will have
multiple types of memory, e.g. DRAM and PMEM (persistent memory). The
memory subsystem of these machines can be called memory tiering system,
because the performance of the different types of memory are different.
After commit c221c0b0308f ("device-dax: "Hotplug" persistent memory for
use like normal RAM"), the PMEM could be used as the cost-effective
volatile memory in separate NUMA nodes. In a typical memory tiering
system, there are CPUs, DRAM and PMEM in each physical NUMA node. The
CPUs and the DRAM will be put in one logical node, while the PMEM will
be put in another (faked) logical node.
To optimize the system overall performance, the hot pages should be
placed in DRAM node. To do that, we need to identify the hot pages in
the PMEM node and migrate them to DRAM node via NUMA migration.
In the original NUMA balancing, there are already a set of existing
mechanisms to identify the pages recently accessed by the CPUs in a node
and migrate the pages to the node. So we can reuse these mechanisms to
build the mechanisms to optimize the page placement in the memory
tiering system. This is implemented in this patchset.
At the other hand, the cold pages should be placed in PMEM node. So, we
also need to identify the cold pages in the DRAM node and migrate them
to PMEM node.
In commit 26aa2d199d6f ("mm/migrate: demote pages during reclaim"), a
mechanism to demote the cold DRAM pages to PMEM node under memory
pressure is implemented. Based on that, the cold DRAM pages can be
demoted to PMEM node proactively to free some memory space on DRAM node
to accommodate the promoted hot PMEM pages. This is implemented in this
patchset too.
We have tested the solution with the pmbench memory accessing benchmark
with the 80:20 read/write ratio and the Gauss access address
distribution on a 2 socket Intel server with Optane DC Persistent Memory
Model. The test results shows that the pmbench score can improve up to
95.9%.
This patch (of 3):
In a system with multiple memory types, e.g. DRAM and PMEM, the CPU
and DRAM in one socket will be put in one NUMA node as before, while
the PMEM will be put in another NUMA node as described in the
description of the commit c221c0b0308f ("device-dax: "Hotplug"
persistent memory for use like normal RAM"). So, the NUMA balancing
mechanism will identify all PMEM accesses as remote access and try to
promote the PMEM pages to DRAM.
To distinguish the number of the inter-type promoted pages from that of
the inter-socket migrated pages. A new vmstat count is added. The
counter is per-node (count in the target node). So this can be used to
identify promotion imbalance among the NUMA nodes.
Link: https://lkml.kernel.org/r/20220301085329.3210428-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220221084529.1052339-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 14:46:20 -07:00
|
|
|
|
mm,memcg: provide per-cgroup counters for NUMA balancing operations
The ability to observe the demotion and promotion decisions made by the
kernel on a per-cgroup basis is important for monitoring and tuning
containerized workloads on machines equipped with tiered memory.
Different containers in the system may experience drastically different
memory tiering actions that cannot be distinguished from the global
counters alone.
For example, a container running a workload that has a much hotter memory
accesses will likely see more promotions and fewer demotions, potentially
depriving a colocated container of top tier memory to such an extent that
its performance degrades unacceptably.
For another example, some containers may exhibit longer periods between
data reuse, causing much more numa_hint_faults than numa_pages_migrated.
In this case, tuning hot_threshold_ms may be appropriate, but the signal
can easily be lost if only global counters are available.
In the long term, we hope to introduce per-cgroup control of promotion and
demotion actions to implement memory placement policies in tiering.
This patch set adds seven counters to memory.stat in a cgroup:
numa_pages_migrated, numa_pte_updates, numa_hint_faults, pgdemote_kswapd,
pgdemote_khugepaged, pgdemote_direct and pgpromote_success. pgdemote_*
and pgpromote_success are also available in memory.numa_stat.
count_memcg_events_mm() is added to count multiple event occurrences at
once, and get_mem_cgroup_from_folio() is added because we need to get a
reference to the memcg of a folio before it's migrated to track
numa_pages_migrated. The accounting of PGDEMOTE_* is moved to
shrink_inactive_list() before being changed to per-cgroup.
[kaiyang2@cs.cmu.edu: add documentation of the memcg counters in cgroup-v2.rst]
Link: https://lkml.kernel.org/r/20240814235122.252309-1-kaiyang2@cs.cmu.edu
Link: https://lkml.kernel.org/r/20240814174227.30639-1-kaiyang2@cs.cmu.edu
Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Wei Xu <weixugc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-14 17:42:27 +00:00
|
|
|
|
2012-10-25 14:16:34 +02:00
|
|
|
|
mm/migrate: move NUMA hinting fault folio isolation + checks under PTL
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-06-20 23:29:35 +02:00
|
|
|
|
2012-10-25 14:16:34 +02:00
|
|
|
|
2012-12-05 09:32:56 +00:00
|
|
|
|
2022-08-18 18:40:34 +05:30
|
|
|
|
