kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-28 20:03:05 +00:00
Code Issues Releases Packages Activity
linux/drivers/net/macsec.c

4523 lines
110 KiB
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 08:55:01 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
drivers, net: convert masces_rx_sa.refcnt from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_rx_sa.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 10:23:43 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: enable GRO and RPS on macsec devices Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 18:11:32 +02:00
net: macsec: move some definitions in a dedicated header This patch moves some structure, type and identifier definitions into a MACsec specific header. This patch does not modify how the MACsec code is running and only move things around. This is a preparation for the future MACsec hardware offloading support, which will re-use those definitions outside macsec.c. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:39 +01:00
net/macsec: Add MACsec skb_metadata_dst Tx Data path support In the current MACsec offload implementation, MACsec interfaces shares the same MAC address by default. Therefore, HW can't distinguish from which MACsec interface the traffic originated from. MACsec stack will use skb_metadata_dst to store the SCI value, which is unique per Macsec interface, skb_metadat_dst will be used by the offloading device driver to associate the SKB with the corresponding offloaded interface (SCI). Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:13 -07:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: restrict to ethernet devices Only attach macsec to ethernet devices. Syzbot was able to trigger a KMSAN warning in macsec_handle_frame by attaching to a phonet device. Macvlan has a similar check in macvlan_port_create. v1->v2 - fix commit message typo Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22 13:51:13 -04:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
DRIVERS: net: macsec: Fix multiple coding style issues This patch fixes a couple of issues highlighted by checkpatch.pl: * Missing a blank line after declarations * Alignment should match open parenthesis Signed-off-by: Romain Aviolat <r.aviolat@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20 21:33:08 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
DRIVERS: net: macsec: Fix multiple coding style issues This patch fixes a couple of issues highlighted by checkpatch.pl: * Missing a blank line after declarations * Alignment should match open parenthesis Signed-off-by: Romain Aviolat <r.aviolat@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20 21:33:08 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix UAF bug for real_dev Create a new macsec device but not get reference to real_dev. That can not ensure that real_dev is freed after macsec. That will trigger the UAF bug for real_dev as following: ================================================================== BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 Call Trace: ... macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 dev_get_iflink+0x73/0xe0 net/core/dev.c:637 default_operstate net/core/link_watch.c:42 [inline] rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54 linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161 Allocated by task 22209: ... alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549 rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235 veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748 Freed by task 8: ... kfree+0xd6/0x4d0 mm/slub.c:4552 kvfree+0x42/0x50 mm/util.c:615 device_release+0x9f/0x240 drivers/base/core.c:2229 kobject_cleanup lib/kobject.c:673 [inline] kobject_release lib/kobject.c:704 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1c8/0x540 lib/kobject.c:721 netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327 After commit faab39f63c1f ("net: allow out-of-order netdev unregistration") and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we can add dev_hold_track() in macsec_dev_init() and dev_put_track() in macsec_free_netdev() to fix the problem. Fixes: 2bce1ebed17d ("macsec: fix refcnt leak in module exit routine") Reported-by: syzbot+d0e94b65ac259c29ce7a@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/r/20220531074500.1272846-1-william.xuanziyang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-31 15:45:00 +08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: Add missing documentation for 'gro_cells' Fixes the following W=1 kernel build warning(s): drivers/net/macsec.c:113: warning: Function parameter or member 'gro_cells' not described in 'macsec_dev' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201102114512.1062724-26-lee.jones@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-02 11:45:07 +00:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: introduce mdo_insert_tx_tag Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in the ethernet frame. This operation will increase the frame size with up to 32 bytes. If the frames are sent at line rate, the PHY will not have enough room to insert the SecTAG and the ICV. Some PHYs use a hardware buffer to store a number of ethernet frames and, if it fills up, a pause frame is sent to the MAC to control the flow. This HW implementation does not need any modification in the stack. Other PHYs might offer to use a specific ethertype with some padding bytes present in the ethernet frame. This ethertype and its associated bytes will be replaced by the SecTAG and ICV. mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the skb. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:30 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix UAF bug for real_dev Create a new macsec device but not get reference to real_dev. That can not ensure that real_dev is freed after macsec. That will trigger the UAF bug for real_dev as following: ================================================================== BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 Call Trace: ... macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 dev_get_iflink+0x73/0xe0 net/core/dev.c:637 default_operstate net/core/link_watch.c:42 [inline] rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54 linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161 Allocated by task 22209: ... alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549 rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235 veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748 Freed by task 8: ... kfree+0xd6/0x4d0 mm/slub.c:4552 kvfree+0x42/0x50 mm/util.c:615 device_release+0x9f/0x240 drivers/base/core.c:2229 kobject_cleanup lib/kobject.c:673 [inline] kobject_release lib/kobject.c:704 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1c8/0x540 lib/kobject.c:721 netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327 After commit faab39f63c1f ("net: allow out-of-order netdev unregistration") and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we can add dev_hold_track() in macsec_dev_init() and dev_put_track() in macsec_free_netdev() to fix the problem. Fixes: 2bce1ebed17d ("macsec: fix refcnt leak in module exit routine") Reported-by: syzbot+d0e94b65ac259c29ce7a@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/r/20220531074500.1272846-1-william.xuanziyang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-31 15:45:00 +08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: enable GRO and RPS on macsec devices Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 18:11:32 +02:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: introduce mdo_insert_tx_tag Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in the ethernet frame. This operation will increase the frame size with up to 32 bytes. If the frames are sent at line rate, the PHY will not have enough room to insert the SecTAG and the ICV. Some PHYs use a hardware buffer to store a number of ethernet frames and, if it fills up, a pause frame is sent to the MAC to control the flow. This HW implementation does not need any modification in the stack. Other PHYs might offer to use a specific ethertype with some padding bytes present in the ethernet frame. This ethertype and its associated bytes will be replaced by the SecTAG and ICV. mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the skb. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:30 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
drivers, net: convert masces_rx_sa.refcnt from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_rx_sa.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 10:23:43 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
drivers, net: convert masces_rx_sc.refcnt from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_rx_sc.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 10:23:44 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
drivers, net: convert masces_rx_sc.refcnt from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_rx_sc.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 10:23:44 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
drivers, net: convert masces_rx_sa.refcnt from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_rx_sa.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 10:23:43 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
drivers, net: convert masces_tx_sa.refcnt from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_tx_sa.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 10:23:45 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
drivers, net: convert masces_tx_sa.refcnt from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_tx_sa.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 10:23:45 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: limit replay window size with XPN IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value of the replay window is 2^30-1, to help with recovery of the upper bits of the PN. To avoid leaving the existing macsec device in an inconsistent state if this test fails during changelink, reuse the cleanup mechanism introduced for HW offload. This wasn't needed until now because macsec_changelink_common could not fail during changelink, as modifying the cipher suite was not allowed. Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so that secy->xpn is set. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 11:16:29 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: drivers: get ready for const netdev->dev_addr Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. We will make netdev->dev_addr a const. Make sure local references to netdev->dev_addr are constant. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22 16:21:02 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix header length if SCI is added if explicitly disabled Even if sending SCIs is explicitly disabled, the code that creates the Security Tag might still decide to add it (e.g. if multiple RX SCs are defined on the MACsec interface). But because the header length so far only depended on the configuration option the SCI overwrote the original frame's contents (EtherType and e.g. the beginning of the IP header) and if encrypted did not visibly end up in the packet, while the SC flag in the TCI field of the Security Tag was still set, resulting in invalid MACsec frames. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24 15:44:26 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix header length if SCI is added if explicitly disabled Even if sending SCIs is explicitly disabled, the code that creates the Security Tag might still decide to add it (e.g. if multiple RX SCs are defined on the MACsec interface). But because the header length so far only depended on the configuration option the SCI overwrote the original frame's contents (EtherType and e.g. the beginning of the IP header) and if encrypted did not visibly end up in the packet, while the SC flag in the TCI field of the Security Tag was still set, resulting in invalid MACsec frames. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24 15:44:26 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix header length if SCI is added if explicitly disabled Even if sending SCIs is explicitly disabled, the code that creates the Security Tag might still decide to add it (e.g. if multiple RX SCs are defined on the MACsec interface). But because the header length so far only depended on the configuration option the SCI overwrote the original frame's contents (EtherType and e.g. the beginning of the IP header) and if encrypted did not visibly end up in the packet, while the SC flag in the TCI field of the Security Tag was still set, resulting in invalid MACsec frames. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24 15:44:26 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net/macsec: Move some code for sharing with various drivers that implements offload Move some MACsec infrastructure like defines and functions, in order to avoid code duplication for future drivers which implements MACsec offload. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ben Ben-Ishay <benishay@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:15 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: add support for offloading to the MAC This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC, allowing a user to select a MAC as a provider for MACsec offloading operations. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:33 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: add support for offloading to the MAC This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC, allowing a user to select a MAC as a provider for MACsec offloading operations. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:33 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: add support for offloading to the MAC This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC, allowing a user to select a MAC as a provider for MACsec offloading operations. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:33 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: add support for offloading to the MAC This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC, allowing a user to select a MAC as a provider for MACsec offloading operations. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:33 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: limit ICV length to 16 octets IEEE 802.1AE-2006 standard recommends that the ICV element in a MACsec frame should not exceed 16 octets: add MACSEC_STD_ICV_LEN in uapi definitions accordingly, and avoid accepting configurations where the ICV length exceeds the standard value. Leave definition of MACSEC_MAX_ICV_LEN unchanged for backwards compatibility with userspace programs. Fixes: dece8d2b78d1 ("uapi: add MACsec bits") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:56 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: PN wrap callback Allow to call macsec_pn_wrapped from hardware drivers to notify when a PN rolls over. Some drivers might used an interrupt to implement this. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:47 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
net: macsec: PN wrap callback Allow to call macsec_pn_wrapped from hardware drivers to notify when a PN rolls over. Some drivers might used an interrupt to implement this. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:47 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: Use helper functions to update stats Use the helper functions dev_sw_netstats_rx_add() and dev_sw_netstats_tx_add() to update stats, which helps to provide code readability. Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-10 16:56:41 +08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: Remove completion function scaffolding This patch removes the temporary scaffolding now that the comletion function signature has been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-06 18:22:36 +08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: Remove completion function scaffolding This patch removes the temporary scaffolding now that the comletion function signature has been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-06 18:22:36 +08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: allocate sg and iv on the heap For the crypto callbacks to work properly, we cannot have sg and iv on the stack. Use kmalloc instead, with a single allocation for aead_request + scatterlist + iv. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 15:25:15 +02:00
macsec: dynamically allocate space for sglist We call skb_cow_data, which is good anyway to ensure we can actually modify the skb as such (another error from prior). Now that we have the number of fragments required, we can safely allocate exactly that amount of memory. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 19:08:18 +02:00
macsec: allocate sg and iv on the heap For the crypto callbacks to work properly, we cannot have sg and iv on the stack. Use kmalloc instead, with a single allocation for aead_request + scatterlist + iv. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 15:25:15 +02:00
macsec: dynamically allocate space for sglist We call skb_cow_data, which is good anyway to ensure we can actually modify the skb as such (another error from prior). Now that we have the number of fragments required, we can safely allocate exactly that amount of memory. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 19:08:18 +02:00
macsec: allocate sg and iv on the heap For the crypto callbacks to work properly, we cannot have sg and iv on the stack. Use kmalloc instead, with a single allocation for aead_request + scatterlist + iv. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 15:25:15 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: allocate sg and iv on the heap For the crypto callbacks to work properly, we cannot have sg and iv on the stack. Use kmalloc instead, with a single allocation for aead_request + scatterlist + iv. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 15:25:15 +02:00
macsec: dynamically allocate space for sglist We call skb_cow_data, which is good anyway to ensure we can actually modify the skb as such (another error from prior). Now that we have the number of fragments required, we can safely allocate exactly that amount of memory. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 19:08:18 +02:00
macsec: allocate sg and iv on the heap For the crypto callbacks to work properly, we cannot have sg and iv on the stack. Use kmalloc instead, with a single allocation for aead_request + scatterlist + iv. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 15:25:15 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix header length if SCI is added if explicitly disabled Even if sending SCIs is explicitly disabled, the code that creates the Security Tag might still decide to add it (e.g. if multiple RX SCs are defined on the MACsec interface). But because the header length so far only depended on the configuration option the SCI overwrote the original frame's contents (EtherType and e.g. the beginning of the IP header) and if encrypted did not visibly end up in the packet, while the SC flag in the TCI field of the Security Tag was still set, resulting in invalid MACsec frames. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24 15:44:26 +02:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
Revert "net: macsec: use skb_ensure_writable_head_tail to expand the skb" This reverts commit b34ab3527b9622ca4910df24ff5beed5aa66c6b5. Using skb_ensure_writable_head_tail without a call to skb_unshare causes the MACsec stack to operate on the original skb rather than a copy in the macsec_encrypt path. This causes the buffer to be exceeded in space, and leads to warnings generated by skb_put operations. Opting to revert this change since skb_copy_expand is more efficient than skb_ensure_writable_head_tail followed by a call to skb_unshare. Log: ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:2464! invalid opcode: 0000 [#1] SMP KASAN CPU: 21 PID: 61997 Comm: iperf3 Not tainted 6.7.0-rc8_for_upstream_debug_2024_01_07_17_05 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_put+0x113/0x190 Code: 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 70 3b 9d bc 00 00 00 77 0e 48 83 c4 08 4c 89 e8 5b 5d 41 5d c3 <0f> 0b 4c 8b 6c 24 20 89 74 24 04 e8 6d b7 f0 fe 8b 74 24 04 48 c7 RSP: 0018:ffff8882694e7278 EFLAGS: 00010202 RAX: 0000000000000025 RBX: 0000000000000100 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000010 RDI: ffff88816ae0bad4 RBP: ffff88816ae0ba60 R08: 0000000000000004 R09: 0000000000000004 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88811ba5abfa R13: ffff8882bdecc100 R14: ffff88816ae0ba60 R15: ffff8882bdecc0ae FS: 00007fe54df02740(0000) GS:ffff88881f080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe54d92e320 CR3: 000000010a345003 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? die+0x33/0x90 ? skb_put+0x113/0x190 ? do_trap+0x1b4/0x3b0 ? skb_put+0x113/0x190 ? do_error_trap+0xb6/0x180 ? skb_put+0x113/0x190 ? handle_invalid_op+0x2c/0x30 ? skb_put+0x113/0x190 ? exc_invalid_op+0x2b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? skb_put+0x113/0x190 ? macsec_start_xmit+0x4e9/0x21d0 macsec_start_xmit+0x830/0x21d0 ? get_txsa_from_nl+0x400/0x400 ? lock_downgrade+0x690/0x690 ? dev_queue_xmit_nit+0x78b/0xae0 dev_hard_start_xmit+0x151/0x560 __dev_queue_xmit+0x1580/0x28f0 ? check_chain_key+0x1c5/0x490 ? netdev_core_pick_tx+0x2d0/0x2d0 ? __ip_queue_xmit+0x798/0x1e00 ? lock_downgrade+0x690/0x690 ? mark_held_locks+0x9f/0xe0 ip_finish_output2+0x11e4/0x2050 ? ip_mc_finish_output+0x520/0x520 ? ip_fragment.constprop.0+0x230/0x230 ? __ip_queue_xmit+0x798/0x1e00 __ip_queue_xmit+0x798/0x1e00 ? __skb_clone+0x57a/0x760 __tcp_transmit_skb+0x169d/0x3490 ? lock_downgrade+0x690/0x690 ? __tcp_select_window+0x1320/0x1320 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x286/0x400 ? tcp_small_queue_check.isra.0+0x120/0x3d0 tcp_write_xmit+0x12b6/0x7100 ? skb_page_frag_refill+0x1e8/0x460 __tcp_push_pending_frames+0x92/0x320 tcp_sendmsg_locked+0x1ed4/0x3190 ? tcp_sendmsg_fastopen+0x650/0x650 ? tcp_sendmsg+0x1a/0x40 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x286/0x400 tcp_sendmsg+0x28/0x40 ? inet_send_prepare+0x1b0/0x1b0 __sock_sendmsg+0xc5/0x190 sock_write_iter+0x222/0x380 ? __sock_sendmsg+0x190/0x190 ? kfree+0x96/0x130 vfs_write+0x842/0xbd0 ? kernel_write+0x530/0x530 ? __fget_light+0x51/0x220 ? __fget_light+0x51/0x220 ksys_write+0x172/0x1d0 ? update_socket_protocol+0x10/0x10 ? __x64_sys_read+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x286/0x400 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0x7fe54d9018b7 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffdbd4191d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000025 RCX: 00007fe54d9018b7 RDX: 0000000000000025 RSI: 0000000000d9859c RDI: 0000000000000004 RBP: 0000000000d9859c R08: 0000000000000004 R09: 0000000000000000 R10: 00007fe54d80afe0 R11: 0000000000000246 R12: 0000000000000004 R13: 0000000000000025 R14: 00007fe54e00ec00 R15: 0000000000d982a0 </TASK> Modules linked in: 8021q garp mrp iptable_raw bonding vfio_pci rdma_ucm ib_umad mlx5_vfio_pci mlx5_ib vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ip_gre nf_tables ipip tunnel4 ib_ipoib ip6_gre gre ip6_tunnel tunnel6 geneve openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core zram zsmalloc fuse [last unloaded: ib_uverbs] ---[ end trace 0000000000000000 ]--- Cc: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20240118191811.50271-1-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-18 11:18:06 -08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net/macsec: Move some code for sharing with various drivers that implements offload Move some MACsec infrastructure like defines and functions, in order to avoid code duplication for future drivers which implements MACsec offload. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ben Ben-Ishay <benishay@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:15 -07:00
networking: make skb_push & __skb_push return void pointers It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 14:29:23 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: dynamically allocate space for sglist We call skb_cow_data, which is good anyway to ensure we can actually modify the skb as such (another error from prior). Now that we have the number of fragments required, we can safely allocate exactly that amount of memory. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 19:08:18 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: allocate sg and iv on the heap For the crypto callbacks to work properly, we cannot have sg and iv on the stack. Use kmalloc instead, with a single allocation for aead_request + scatterlist + iv. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 15:25:15 +02:00
macsec: dynamically allocate space for sglist We call skb_cow_data, which is good anyway to ensure we can actually modify the skb as such (another error from prior). Now that we have the number of fragments required, we can safely allocate exactly that amount of memory. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 19:08:18 +02:00
macsec: check return value of skb_to_sgvec always Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04 04:16:25 +02:00
macsec: fix memory leaks when skb_to_sgvec fails Fixes: cda7ea690350 ("macsec: check return value of skb_to_sgvec always") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-10 17:07:12 +02:00
macsec: check return value of skb_to_sgvec always Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04 04:16:25 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix header length if SCI is added if explicitly disabled Even if sending SCIs is explicitly disabled, the code that creates the Security Tag might still decide to add it (e.g. if multiple RX SCs are defined on the MACsec interface). But because the header length so far only depended on the configuration option the SCI overwrote the original frame's contents (EtherType and e.g. the beginning of the IP header) and if encrypted did not visibly end up in the packet, while the SC flag in the TCI field of the Security Tag was still set, resulting in invalid MACsec frames. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24 15:44:26 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix header length if SCI is added if explicitly disabled Even if sending SCIs is explicitly disabled, the code that creates the Security Tag might still decide to add it (e.g. if multiple RX SCs are defined on the MACsec interface). But because the header length so far only depended on the configuration option the SCI overwrote the original frame's contents (EtherType and e.g. the beginning of the IP header) and if encrypted did not visibly end up in the packet, while the SC flag in the TCI field of the Security Tag was still set, resulting in invalid MACsec frames. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24 15:44:26 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use DEV_STATS_INC() syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04 17:26:52 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: use DEV_STATS_INC() syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04 17:26:52 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix checksumming after decryption Fix checksumming after decryption. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-30 22:46:45 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: Use helper functions to update stats Use the helper functions dev_sw_netstats_rx_add() and dev_sw_netstats_tx_add() to update stats, which helps to provide code readability. Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-10 16:56:41 +08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: Remove completion function scaffolding This patch removes the temporary scaffolding now that the comletion function signature has been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-06 18:22:36 +08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: Remove completion function scaffolding This patch removes the temporary scaffolding now that the comletion function signature has been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-06 18:22:36 +08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix reference counting on RXSC in macsec_handle_frame Currently, we lookup the RXSC without taking a reference on it. The RXSA holds a reference on the RXSC, but the SA and SC could still both disappear before we take a reference on the SA. Take a reference on the RXSC in macsec_handle_frame. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 15:37:53 +02:00
macsec: double accounting of dropped rx/tx packets The macsec implementation shouldn't account for rx/tx packets that are dropped in the netdev framework. The netdev framework itself accounts for such packets by atomically updating struct net_device`rx_dropped and struct net_device`tx_dropped fields. Later on when the stats for macsec link is retrieved, the packets dropped in netdev framework will be included in dev_get_stats() after calling macsec.c`macsec_get_stats64() Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 15:25:44 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix validation failed in asynchronous operation. MACSec test failed when asynchronous crypto operations is used. It encounters packet validation failed since macsec_skb_cb(skb)->valid is always 'false'. This patch adds missing "macsec_skb_cb(skb)->valid = true" in macsec_decrypt_done() when "err == 0". Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21 17:40:45 +08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: double accounting of dropped rx/tx packets The macsec implementation shouldn't account for rx/tx packets that are dropped in the netdev framework. The netdev framework itself accounts for such packets by atomically updating struct net_device`rx_dropped and struct net_device`tx_dropped fields. Later on when the stats for macsec link is retrieved, the packets dropped in netdev framework will be included in dev_get_stats() after calling macsec.c`macsec_get_stats64() Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 15:25:44 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix reference counting on RXSC in macsec_handle_frame Currently, we lookup the RXSC without taking a reference on it. The RXSA holds a reference on the RXSC, but the SA and SC could still both disappear before we take a reference on the SA. Take a reference on the RXSC in macsec_handle_frame. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 15:37:53 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: allocate sg and iv on the heap For the crypto callbacks to work properly, we cannot have sg and iv on the stack. Use kmalloc instead, with a single allocation for aead_request + scatterlist + iv. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 15:25:15 +02:00
macsec: dynamically allocate space for sglist We call skb_cow_data, which is good anyway to ensure we can actually modify the skb as such (another error from prior). Now that we have the number of fragments required, we can safely allocate exactly that amount of memory. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 19:08:18 +02:00
macsec: allocate sg and iv on the heap For the crypto callbacks to work properly, we cannot have sg and iv on the stack. Use kmalloc instead, with a single allocation for aead_request + scatterlist + iv. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 15:25:15 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix rx_sa refcounting with decrypt callback The decrypt callback macsec_decrypt_done needs a reference on the rx_sa and releases it before returning, but macsec_handle_frame already put that reference after macsec_decrypt returned NULL. Set rx_sa to NULL when the decrypt callback runs so that macsec_handle_frame knows it must not release the reference. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:04 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: dynamically allocate space for sglist We call skb_cow_data, which is good anyway to ensure we can actually modify the skb as such (another error from prior). Now that we have the number of fragments required, we can safely allocate exactly that amount of memory. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 19:08:18 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix rx_sa refcounting with decrypt callback The decrypt callback macsec_decrypt_done needs a reference on the rx_sa and releases it before returning, but macsec_handle_frame already put that reference after macsec_decrypt returned NULL. Set rx_sa to NULL when the decrypt callback runs so that macsec_handle_frame knows it must not release the reference. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:04 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: dynamically allocate space for sglist We call skb_cow_data, which is good anyway to ensure we can actually modify the skb as such (another error from prior). Now that we have the number of fragments required, we can safely allocate exactly that amount of memory. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 19:08:18 +02:00
macsec: check return value of skb_to_sgvec always Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04 04:16:25 +02:00
macsec: fix memory leaks when skb_to_sgvec fails Fixes: cda7ea690350 ("macsec: check return value of skb_to_sgvec always") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-10 17:07:12 +02:00
macsec: check return value of skb_to_sgvec always Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04 04:16:25 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix rx_sa refcounting with decrypt callback The decrypt callback macsec_decrypt_done needs a reference on the rx_sa and releases it before returning, but macsec_handle_frame already put that reference after macsec_decrypt returned NULL. Set rx_sa to NULL when the decrypt callback runs so that macsec_handle_frame knows it must not release the reference. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:04 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix rx_sa refcounting with decrypt callback The decrypt callback macsec_decrypt_done needs a reference on the rx_sa and releases it before returning, but macsec_handle_frame already put that reference after macsec_decrypt returned NULL. Set rx_sa to NULL when the decrypt callback runs so that macsec_handle_frame knows it must not release the reference. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:04 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix rx_sa refcounting with decrypt callback The decrypt callback macsec_decrypt_done needs a reference on the rx_sa and releases it before returning, but macsec_handle_frame already put that reference after macsec_decrypt returned NULL. Set rx_sa to NULL when the decrypt callback runs so that macsec_handle_frame knows it must not release the reference. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:04 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: support multicast/broadcast when offloading The idea is simple. If the frame is an exact match for the controlled port (based on DA comparison), then we simply divert this skb to matching port. Multicast/broadcast messages are delivered to all ports. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:36 +03:00
net/macsec: Add MACsec skb_metadata_dst Rx Data path support Like in the Tx changes, if there are more than one MACsec device with the same MAC address as in the packet's destination MAC, the packet will be forward only to this device and not neccessarly to the desired one. Offloading device drivers will mark offloaded MACsec SKBs with the corresponding SCI in the skb_metadata_dst so the macsec rx handler will know to which port to divert those skbs, instead of wrongly solely relaying on dst MAC address comparison. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:14 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net/macsec: Add MACsec skb_metadata_dst Rx Data path support Like in the Tx changes, if there are more than one MACsec device with the same MAC address as in the packet's destination MAC, the packet will be forward only to this device and not neccessarly to the desired one. Offloading device drivers will mark offloaded MACsec SKBs with the corresponding SCI in the skb_metadata_dst so the macsec rx handler will know to which port to divert those skbs, instead of wrongly solely relaying on dst MAC address comparison. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:14 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: support multicast/broadcast when offloading The idea is simple. If the frame is an exact match for the controlled port (based on DA comparison), then we simply divert this skb to matching port. Multicast/broadcast messages are delivered to all ports. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:36 +03:00
macsec: Don't rely solely on the dst MAC address to identify destination MACsec device Offloading device drivers will mark offloaded MACsec SKBs with the corresponding SCI in the skb_metadata_dst so the macsec rx handler will know to which interface to divert those skbs, in case of a marked skb and a mismatch on the dst MAC address, divert the skb to the macsec net_device where the macsec rx_handler will be called to consider cases where relying solely on the dst MAC address is insufficient. One such instance is when using MACsec with a VLAN as an inner header, where the packet structure is ETHERNET | SECTAG | VLAN. In such a scenario, the dst MAC address in the ethernet header will correspond to the VLAN MAC address, resulting in a mismatch. Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19 17:21:26 +03:00
net/macsec: Add MACsec skb_metadata_dst Rx Data path support Like in the Tx changes, if there are more than one MACsec device with the same MAC address as in the packet's destination MAC, the packet will be forward only to this device and not neccessarly to the desired one. Offloading device drivers will mark offloaded MACsec SKBs with the corresponding SCI in the skb_metadata_dst so the macsec rx handler will know to which port to divert those skbs, instead of wrongly solely relaying on dst MAC address comparison. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:14 -07:00
net: macsec: support multicast/broadcast when offloading The idea is simple. If the frame is an exact match for the controlled port (based on DA comparison), then we simply divert this skb to matching port. Multicast/broadcast messages are delivered to all ports. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:36 +03:00
net: dev: Makes sure netif_rx() can be invoked in any context. Dave suggested a while ago (eleven years by now) "Let's make netif_rx() work in all contexts and get rid of netif_rx_ni()". Eric agreed and pointed out that modern devices should use netif_receive_skb() to avoid the overhead. In the meantime someone added another variant, netif_rx_any_context(), which behaves as suggested. netif_rx() must be invoked with disabled bottom halves to ensure that pending softirqs, which were raised within the function, are handled. netif_rx_ni() can be invoked only from process context (bottom halves must be enabled) because the function handles pending softirqs without checking if bottom halves were disabled or not. netif_rx_any_context() invokes on the former functions by checking in_interrupts(). netif_rx() could be taught to handle both cases (disabled and enabled bottom halves) by simply disabling bottom halves while invoking netif_rx_internal(). The local_bh_enable() invocation will then invoke pending softirqs only if the BH-disable counter drops to zero. Eric is concerned about the overhead of BH-disable+enable especially in regard to the loopback driver. As critical as this driver is, it will receive a shortcut to avoid the additional overhead which is not needed. Add a local_bh_disable() section in netif_rx() to ensure softirqs are handled if needed. Provide __netif_rx() which does not disable BH and has a lockdep assert to ensure that interrupts are disabled. Use this shortcut in the loopback driver and in drivers/net/*.c. Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they can be removed once they are no more users left. Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-12 00:38:38 +01:00
macsec: Don't rely solely on the dst MAC address to identify destination MACsec device Offloading device drivers will mark offloaded MACsec SKBs with the corresponding SCI in the skb_metadata_dst so the macsec rx handler will know to which interface to divert those skbs, in case of a marked skb and a mismatch on the dst MAC address, divert the skb to the macsec net_device where the macsec rx_handler will be called to consider cases where relying solely on the dst MAC address is insufficient. One such instance is when using MACsec with a VLAN as an inner header, where the packet structure is ETHERNET | SECTAG | VLAN. In such a scenario, the dst MAC address in the ethernet header will correspond to the VLAN MAC address, resulting in a mismatch. Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19 17:21:26 +03:00
net: macsec: support multicast/broadcast when offloading The idea is simple. If the frame is an exact match for the controlled port (based on DA comparison), then we simply divert this skb to matching port. Multicast/broadcast messages are delivered to all ports. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:36 +03:00
macsec: Don't rely solely on the dst MAC address to identify destination MACsec device Offloading device drivers will mark offloaded MACsec SKBs with the corresponding SCI in the skb_metadata_dst so the macsec rx handler will know to which interface to divert those skbs, in case of a marked skb and a mismatch on the dst MAC address, divert the skb to the macsec net_device where the macsec rx_handler will be called to consider cases where relying solely on the dst MAC address is insufficient. One such instance is when using MACsec with a VLAN as an inner header, where the packet structure is ETHERNET | SECTAG | VLAN. In such a scenario, the dst MAC address in the ethernet header will correspond to the VLAN MAC address, resulting in a mismatch. Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19 17:21:26 +03:00
net: macsec: support multicast/broadcast when offloading The idea is simple. If the frame is an exact match for the controlled port (based on DA comparison), then we simply divert this skb to matching port. Multicast/broadcast messages are delivered to all ports. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:36 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: support multicast/broadcast when offloading The idea is simple. If the frame is an exact match for the controlled port (based on DA comparison), then we simply divert this skb to matching port. Multicast/broadcast messages are delivered to all ports. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:36 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use DEV_STATS_INC() syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04 17:26:52 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: support multicast/broadcast when offloading The idea is simple. If the frame is an exact match for the controlled port (based on DA comparison), then we simply divert this skb to matching port. Multicast/broadcast messages are delivered to all ports. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:36 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: dev: Makes sure netif_rx() can be invoked in any context. Dave suggested a while ago (eleven years by now) "Let's make netif_rx() work in all contexts and get rid of netif_rx_ni()". Eric agreed and pointed out that modern devices should use netif_receive_skb() to avoid the overhead. In the meantime someone added another variant, netif_rx_any_context(), which behaves as suggested. netif_rx() must be invoked with disabled bottom halves to ensure that pending softirqs, which were raised within the function, are handled. netif_rx_ni() can be invoked only from process context (bottom halves must be enabled) because the function handles pending softirqs without checking if bottom halves were disabled or not. netif_rx_any_context() invokes on the former functions by checking in_interrupts(). netif_rx() could be taught to handle both cases (disabled and enabled bottom halves) by simply disabling bottom halves while invoking netif_rx_internal(). The local_bh_enable() invocation will then invoke pending softirqs only if the BH-disable counter drops to zero. Eric is concerned about the overhead of BH-disable+enable especially in regard to the loopback driver. As critical as this driver is, it will receive a shortcut to avoid the additional overhead which is not needed. Add a local_bh_disable() section in netif_rx() to ensure softirqs are handled if needed. Provide __netif_rx() which does not disable BH and has a lockdep assert to ensure that interrupts are disabled. Use this shortcut in the loopback driver and in drivers/net/*.c. Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they can be removed once they are no more users left. Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-12 00:38:38 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: avoid use-after-free in macsec_handle_frame() De-referencing skb after call to gro_cells_receive() is not allowed. We need to fetch skb->len earlier. Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-07 01:42:46 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: enable GRO and RPS on macsec devices Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 18:11:32 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix use-after-free of skb during RX Fix use-after-free of skb when rx_handler returns RX_HANDLER_PASS. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-30 22:46:42 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
DRIVERS: net: macsec: Fix multiple coding style issues This patch fixes a couple of issues highlighted by checkpatch.pl: * Missing a blank line after declarations * Alignment should match open parenthesis Signed-off-by: Romain Aviolat <r.aviolat@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20 21:33:08 +02:00
macsec: fix reference counting on RXSC in macsec_handle_frame Currently, we lookup the RXSC without taking a reference on it. The RXSA holds a reference on the RXSC, but the SA and SC could still both disappear before we take a reference on the SA. Take a reference on the RXSC in macsec_handle_frame. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 15:37:53 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use DEV_STATS_INC() syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04 17:26:52 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use DEV_STATS_INC() syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04 17:26:52 +00:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use DEV_STATS_INC() syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04 17:26:52 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: ensure rx_sa is set when validation is disabled macsec_decrypt() is not called when validation is disabled and so macsec_skb_cb(skb)->rx_sa is not set; but it is used later in macsec_post_decrypt(), ensure that it's always initialized. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Beniamino Galvani <bgalvani@redhat.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26 12:24:53 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix rx_sa refcounting with decrypt callback The decrypt callback macsec_decrypt_done needs a reference on the rx_sa and releases it before returning, but macsec_handle_frame already put that reference after macsec_decrypt returned NULL. Set rx_sa to NULL when the decrypt callback runs so that macsec_handle_frame knows it must not release the reference. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:04 +02:00
macsec: fix reference counting on RXSC in macsec_handle_frame Currently, we lookup the RXSC without taking a reference on it. The RXSA holds a reference on the RXSC, but the SA and SC could still both disappear before we take a reference on the SA. Take a reference on the RXSC in macsec_handle_frame. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 15:37:53 +02:00
macsec: fix rx_sa refcounting with decrypt callback The decrypt callback macsec_decrypt_done needs a reference on the rx_sa and releases it before returning, but macsec_handle_frame already put that reference after macsec_decrypt returned NULL. Set rx_sa to NULL when the decrypt callback runs so that macsec_handle_frame knows it must not release the reference. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:04 +02:00
macsec: fix reference counting on RXSC in macsec_handle_frame Currently, we lookup the RXSC without taking a reference on it. The RXSA holds a reference on the RXSC, but the SA and SC could still both disappear before we take a reference on the SA. Take a reference on the RXSC in macsec_handle_frame. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 15:37:53 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: don't put a NULL rxsa The "deliver:" path of macsec_handle_frame can be called with rx_sa == NULL. Check rx_sa != NULL before calling macsec_rxsa_put(). Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:03 +02:00
macsec: fix reference counting on RXSC in macsec_handle_frame Currently, we lookup the RXSC without taking a reference on it. The RXSA holds a reference on the RXSC, but the SA and SC could still both disappear before we take a reference on the SA. Take a reference on the RXSC in macsec_handle_frame. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 15:37:53 +02:00
macsec: enable GRO and RPS on macsec devices Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 18:11:32 +02:00
macsec: drop skb sk before calling gro_cells_receive Fei Liu reported a crash when doing netperf on a topo of macsec dev over veth: [ 448.919128] refcount_t: underflow; use-after-free. [ 449.090460] Call trace: [ 449.092895] refcount_sub_and_test+0xb4/0xc0 [ 449.097155] tcp_wfree+0x2c/0x150 [ 449.100460] ip_rcv+0x1d4/0x3a8 [ 449.103591] __netif_receive_skb_core+0x554/0xae0 [ 449.108282] __netif_receive_skb+0x28/0x78 [ 449.112366] netif_receive_skb_internal+0x54/0x100 [ 449.117144] napi_gro_complete+0x70/0xc0 [ 449.121054] napi_gro_flush+0x6c/0x90 [ 449.124703] napi_complete_done+0x50/0x130 [ 449.128788] gro_cell_poll+0x8c/0xa8 [ 449.132351] net_rx_action+0x16c/0x3f8 [ 449.136088] __do_softirq+0x128/0x320 The issue was caused by skb's true_size changed without its sk's sk_wmem_alloc increased in tcp/skb_gro_receive(). Later when the skb is being freed and the skb's truesize is subtracted from its sk's sk_wmem_alloc in tcp_wfree(), underflow occurs. macsec is calling gro_cells_receive() to receive a packet, which actually requires skb->sk to be NULL. However when macsec dev is over veth, it's possible the skb->sk is still set if the skb was not unshared or expanded from the peer veth. ip_rcv() is calling skb_orphan() to drop the skb's sk for tproxy, but it is too late for macsec's calling gro_cells_receive(). So fix it by dropping the skb's sk earlier on rx path of macsec. Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices") Reported-by: Xiumei Mu <xmu@redhat.com> Reported-by: Fei Liu <feliu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-23 17:02:46 +08:00
macsec: enable GRO and RPS on macsec devices Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 18:11:32 +02:00
macsec: avoid use-after-free in macsec_handle_frame() De-referencing skb after call to gro_cells_receive() is not allowed. We need to fetch skb->len earlier. Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-07 01:42:46 -07:00
macsec: enable GRO and RPS on macsec devices Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 18:11:32 +02:00
macsec: use DEV_STATS_INC() syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04 17:26:52 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: enable GRO and RPS on macsec devices Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 18:11:32 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix reference counting on RXSC in macsec_handle_frame Currently, we lookup the RXSC without taking a reference on it. The RXSA holds a reference on the RXSC, but the SA and SC could still both disappear before we take a reference on the SA. Take a reference on the RXSC in macsec_handle_frame. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 15:37:53 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net/macsec: Move some code for sharing with various drivers that implements offload Move some MACsec infrastructure like defines and functions, in order to avoid code duplication for future drivers which implements MACsec offload. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ben Ben-Ishay <benishay@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:15 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use DEV_STATS_INC() syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04 17:26:52 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: dev: Makes sure netif_rx() can be invoked in any context. Dave suggested a while ago (eleven years by now) "Let's make netif_rx() work in all contexts and get rid of netif_rx_ni()". Eric agreed and pointed out that modern devices should use netif_receive_skb() to avoid the overhead. In the meantime someone added another variant, netif_rx_any_context(), which behaves as suggested. netif_rx() must be invoked with disabled bottom halves to ensure that pending softirqs, which were raised within the function, are handled. netif_rx_ni() can be invoked only from process context (bottom halves must be enabled) because the function handles pending softirqs without checking if bottom halves were disabled or not. netif_rx_any_context() invokes on the former functions by checking in_interrupts(). netif_rx() could be taught to handle both cases (disabled and enabled bottom halves) by simply disabling bottom halves while invoking netif_rx_internal(). The local_bh_enable() invocation will then invoke pending softirqs only if the BH-disable counter drops to zero. Eric is concerned about the overhead of BH-disable+enable especially in regard to the loopback driver. As critical as this driver is, it will receive a shortcut to avoid the additional overhead which is not needed. Add a local_bh_disable() section in netif_rx() to ensure softirqs are handled if needed. Provide __netif_rx() which does not disable BH and has a lockdep assert to ensure that interrupts are disabled. Use this shortcut in the loopback driver and in drivers/net/*.c. Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they can be removed once they are no more users left. Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-12 00:38:38 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use DEV_STATS_INC() syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04 17:26:52 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
Revert "net: macsec: preserve ingress frame ordering" This reverts commit ab046a5d4be4c90a3952a0eae75617b49c0cb01b. It was trying to work around an issue at the crypto layer by excluding ASYNC implementations of gcm(aes), because a bug in the AESNI version caused reordering when some requests bypassed the cryptd queue while older requests were still pending on the queue. This was fixed by commit 38b2f68b4264 ("crypto: aesni - Fix cryptd reordering problem on gcm"), which pre-dates ab046a5d4be4. Herbert Xu confirmed that all ASYNC implementations are expected to maintain the ordering of completions wrt requests, so we can use them in MACsec. On my test machine, this restores the performance of a single netperf instance, from 1.4Gbps to 4.4Gbps. Link: https://lore.kernel.org/netdev/9328d206c5d9f9239cae27e62e74de40b258471d.1692279161.git.sd@queasysnail.net/T/ Link: https://lore.kernel.org/netdev/1b0cec71-d084-8153-2ba4-72ce71abeb65@byu.edu/ Link: https://lore.kernel.org/netdev/d335ddaa-18dc-f9f0-17ee-9783d3b2ca29@mailbox.tu-dresden.de/ Fixes: ab046a5d4be4 ("net: macsec: preserve ingress frame ordering") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/11c952469d114db6fb29242e1d9545e61f52f512.1693757159.git.sd@queasysnail.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-04 10:56:04 +02:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
drivers, net: convert masces_rx_sa.refcnt from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_rx_sa.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 10:23:43 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix secy->n_rx_sc accounting secy->n_rx_sc is supposed to be the number of _active_ rxsc's within a secy. This is then used by macsec_send_sci to help decide if we should add the SCI to the header or not. This logic is currently broken when we create a new RXSC and turn it off at creation, as create_rx_sc always sets ->active to true (and immediately uses that to increment n_rx_sc), and only later macsec_add_rxsc sets rx_sc->active. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02 22:33:14 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix secy->n_rx_sc accounting secy->n_rx_sc is supposed to be the number of _active_ rxsc's within a secy. This is then used by macsec_send_sci to help decide if we should add the SCI to the header or not. This logic is currently broken when we create a new RXSC and turn it off at creation, as create_rx_sc always sets ->active to true (and immediately uses that to increment n_rx_sc), and only later macsec_add_rxsc sets rx_sc->active. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02 22:33:14 +01:00
drivers, net: convert masces_rx_sc.refcnt from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_rx_sc.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 10:23:44 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
drivers, net: convert masces_tx_sa.refcnt from atomic_t to refcount_t atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_tx_sa.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 10:23:45 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: statically initialize families Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24 14:40:03 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for specifying offload upon link creation This patch adds new netlink attribute to allow a user to (optionally) specify the desired offload mode immediately upon MACSec link creation. Separate iproute patch will be required to support this from user space. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 16:01:34 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: consistently use NLA_POLICY_MIN_LEN() Change places that open-code NLA_POLICY_MIN_LEN() to use the macro instead, giving us flexibility in how we handle the details of the macro. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18 10:17:32 +02:00
macsec: key identifier is 128 bits, not 64 The MACsec standard mentions a key identifier for each key, but doesn't specify anything about it, so I arbitrarily chose 64 bits. IEEE 802.1X-2010 specifies MKA (MACsec Key Agreement), and defines the key identifier to be 128 bits (96 bits "member identifier" + 32 bits "key number"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-07 20:19:29 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: restore uAPI after addition of GCM-AES-256 Commit ccfdec908922 ("macsec: Add support for GCM-AES-256 cipher suite") changed a few values in the uapi headers for MACsec. Because of existing userspace implementations, we need to preserve the value of MACSEC_DEFAULT_CIPHER_ID. Not doing that resulted in wpa_supplicant segfaults when a secure channel was created using the default cipher. Thus, swap MACSEC_DEFAULT_CIPHER_{ID,ALT} back to their original values. Changing the maximum length of the MACSEC_SA_ATTR_KEY attribute is unnecessary, as the previous value (MACSEC_MAX_KEY_LEN, which was 128B) is large enough to carry 32-bytes keys. This patch reverts MACSEC_MAX_KEY_LEN to 128B and restores the old length check on MACSEC_SA_ATTR_KEY. Fixes: ccfdec908922 ("macsec: Add support for GCM-AES-256 cipher suite") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18 17:48:18 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:28 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:28 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: always read MACSEC_SA_ATTR_PN as a u64 Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a u32, sometimes forced into a u64 without checking the actual length of the attribute. Instead, we can use nla_get_u64 everywhere, which will read up to 64 bits into a u64, capped by the actual length of the attribute coming from userspace. This fixes several issues: - the check in validate_add_rxsa doesn't work with 32-bit attributes - the checks in validate_add_txsa and validate_upd_sa incorrectly reject X << 32 (with X != 0) Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 11:16:30 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: key identifier is 128 bits, not 64 The MACsec standard mentions a key identifier for each key, but doesn't specify anything about it, so I arbitrarily chose 64 bits. IEEE 802.1X-2010 specifies MKA (MACsec Key Agreement), and defines the key identifier to be 128 bits (96 bits "member identifier" + 32 bits "key number"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-07 20:19:29 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: RXSAs don't need to hold a reference on RXSCs Following the previous patch, RXSCs are held and properly refcounted in the RX path (instead of being implicitly held by their SA), so the SA doesn't need to hold a reference on its parent RXSC. This also avoids panics on module unload caused by the double layer of RCU callbacks (call_rcu frees the RXSA, which puts the final reference on the RXSC and allows to free it in its own call_rcu) that commit b196c22af5c3 ("macsec: add rcu_barrier() on module exit") didn't protect against. There were also some refcounting bugs in macsec_add_rxsa where I didn't put the reference on the RXSC on the error paths, which would lead to memory leaks. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-29 15:37:54 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: fix NULL deref in macsec_add_rxsa Commit 48ef50fa866a added a test on tb_sa[MACSEC_SA_ATTR_PN], but nothing guarantees that it's not NULL at this point. The same code was added to macsec_add_txsa, but there it's not a problem because validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is present. Note: it's not possible to reproduce with iproute, because iproute doesn't allow creating an SA without specifying the PN. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315 Reported-by: Frantisek Sumsal <fsumsal@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 11:16:27 +02:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: fix error message in macsec_add_rxsa and _txsa The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 11:16:28 +02:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: Expose extended packet number (EPN) properties to macsec offload Currently macsec invokes HW offload path before reading extended packet number (EPN) related user properties i.e. salt and short secure channel identifier (ssci), hence preventing macsec EPN HW offload. Expose those by moving macsec EPN properties reading prior to HW offload path. Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21 11:10:45 -07:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: fix the length used to copy the key for offloading The key length used when offloading macsec to Ethernet or PHY drivers was set to MACSEC_KEYID_LEN (16), which is an issue as: - This was never meant to be the key length. - The key length can be > 16. Fix this by using MACSEC_MAX_KEY_LEN to store the key (the max length accepted in uAPI) and secy->key_len to copy it. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Reported-by: Lior Nahmanson <liorna@nvidia.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:38:28 +02:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: clear encryption keys from the stack after setting up offload macsec_add_rxsa and macsec_add_txsa copy the key to an on-stack offloading context to pass it to the drivers, but leaves it there when it's done. Clear it with memzero_explicit as soon as it's not needed anymore. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02 22:33:16 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: fix potential resource leak in macsec_add_rxsa() and macsec_add_txsa() init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa-> key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error occurs after init_rx_sa() is called in macsec_add_rxsa(), the function released rx_sa with kfree() without releasing rx_sa->stats and rx_sa-> key.tfm, which will lead to a resource leak. We should call macsec_rxsa_put() instead of kfree() to decrease the ref count of rx_sa and release the relevant resource if the refcount is 0. The same bug exists in macsec_add_txsa() for tx_sa as well. This patch fixes the above two bugs. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 17:29:02 +08:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
macsec: fix secy->n_rx_sc accounting secy->n_rx_sc is supposed to be the number of _active_ rxsc's within a secy. This is then used by macsec_send_sci to help decide if we should add the SCI to the header or not. This logic is currently broken when we create a new RXSC and turn it off at creation, as create_rx_sc always sets ->active to true (and immediately uses that to increment n_rx_sc), and only later macsec_add_rxsc sets rx_sc->active. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02 22:33:14 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix secy->n_rx_sc accounting secy->n_rx_sc is supposed to be the number of _active_ rxsc's within a secy. This is then used by macsec_send_sci to help decide if we should add the SCI to the header or not. This logic is currently broken when we create a new RXSC and turn it off at creation, as create_rx_sc always sets ->active to true (and immediately uses that to increment n_rx_sc), and only later macsec_add_rxsc sets rx_sc->active. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02 22:33:14 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: delete new rxsc when offload fails Currently we get an inconsistent state: - netlink returns the error to userspace - the RXSC is installed but not offloaded Then the device could get confused when we try to add an RXSA, because the RXSC isn't supposed to exist. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02 22:33:13 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: always read MACSEC_SA_ATTR_PN as a u64 Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a u32, sometimes forced into a u64 without checking the actual length of the attribute. Instead, we can use nla_get_u64 everywhere, which will read up to 64 bits into a u64, capped by the actual length of the attribute coming from userspace. This fixes several issues: - the check in validate_add_rxsa doesn't work with 32-bit attributes - the checks in validate_add_txsa and validate_upd_sa incorrectly reject X << 32 (with X != 0) Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 11:16:30 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: key identifier is 128 bits, not 64 The MACsec standard mentions a key identifier for each key, but doesn't specify anything about it, so I arbitrarily chose 64 bits. IEEE 802.1X-2010 specifies MKA (MACsec Key Agreement), and defines the key identifier to be 128 bits (96 bits "member identifier" + 32 bits "key number"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-07 20:19:29 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: fix error message in macsec_add_rxsa and _txsa The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 11:16:28 +02:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix error codes when a SA is created preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:57 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: Expose extended packet number (EPN) properties to macsec offload Currently macsec invokes HW offload path before reading extended packet number (EPN) related user properties i.e. salt and short secure channel identifier (ssci), hence preventing macsec EPN HW offload. Expose those by moving macsec EPN properties reading prior to HW offload path. Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21 11:10:45 -07:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: fix the length used to copy the key for offloading The key length used when offloading macsec to Ethernet or PHY drivers was set to MACSEC_KEYID_LEN (16), which is an issue as: - This was never meant to be the key length. - The key length can be > 16. Fix this by using MACSEC_MAX_KEY_LEN to store the key (the max length accepted in uAPI) and secy->key_len to copy it. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Reported-by: Lior Nahmanson <liorna@nvidia.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24 11:38:28 +02:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: clear encryption keys from the stack after setting up offload macsec_add_rxsa and macsec_add_txsa copy the key to an on-stack offloading context to pass it to the drivers, but leaves it there when it's done. Clear it with memzero_explicit as soon as it's not needed anymore. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02 22:33:16 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: fix potential resource leak in macsec_add_rxsa() and macsec_add_txsa() init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa-> key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error occurs after init_rx_sa() is called in macsec_add_rxsa(), the function released rx_sa with kfree() without releasing rx_sa->stats and rx_sa-> key.tfm, which will lead to a resource leak. We should call macsec_rxsa_put() instead of kfree() to decrease the ref count of rx_sa and release the relevant resource if the refcount is 0. The same bug exists in macsec_add_txsa() for tx_sa as well. This patch fixes the above two bugs. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 17:29:02 +08:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: always read MACSEC_SA_ATTR_PN as a u64 Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a u32, sometimes forced into a u64 without checking the actual length of the attribute. Instead, we can use nla_get_u64 everywhere, which will read up to 64 bits into a u64, capped by the actual length of the attribute coming from userspace. This fixes several issues: - the check in validate_add_rxsa doesn't work with 32-bit attributes - the checks in validate_add_txsa and validate_upd_sa incorrectly reject X << 32 (with X != 0) Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 11:16:30 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: indicate next pn update when offloading Indicate next PN update using update_pn flag in macsec_context. Offloaded MACsec implementations does not know whether or not the MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume that next PN should always updated, but this is not always true. The PN can be reset to its initial value using the following command: $ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case Or, the update PN command will succeed even if the driver does not support PN updates. $ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case Comparing the initial PN with the new PN value is not a solution. When the user updates the PN using its initial value the command will succeed, even if the driver does not support it. Like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05 21:06:33 +03:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: indicate next pn update when offloading Indicate next PN update using update_pn flag in macsec_context. Offloaded MACsec implementations does not know whether or not the MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume that next PN should always updated, but this is not always true. The PN can be reset to its initial value using the following command: $ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case Or, the update PN command will succeed even if the driver does not support PN updates. $ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case Comparing the initial PN with the new PN value is not a solution. When the user updates the PN using its initial value the command will succeed, even if the driver does not support it. Like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05 21:06:33 +03:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: Support XPN frame handling - IEEE 802.1AEbw Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:01 +00:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
macsec: fix detection of RXSCs when toggling offloading macsec_is_configured incorrectly uses secy->n_rx_sc to check if some RXSCs exist. secy->n_rx_sc only counts the number of active RXSCs, but there can also be inactive SCs as well, which may be stored in the driver (in case we're disabling offloading), or would have to be pushed to the device (in case we're trying to enable offloading). As long as RXSCs active on creation and never turned off, the issue is not visible. Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02 22:33:15 +01:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
net: macsec: introduce mdo_insert_tx_tag Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in the ethernet frame. This operation will increase the frame size with up to 32 bytes. If the frames are sent at line rate, the PHY will not have enough room to insert the SecTAG and the ICV. Some PHYs use a hardware buffer to store a number of ethernet frames and, if it fills up, a pause frame is sent to the MAC to control the flow. This HW implementation does not need any modification in the stack. Other PHYs might offer to use a specific ethertype with some padding bytes present in the ethernet frame. This ethertype and its associated bytes will be replaced by the SecTAG and ICV. mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the skb. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:30 +02:00
macsec: add support for IFLA_MACSEC_OFFLOAD in macsec_changelink Add support for changing Macsec offload selection through the netlink layer by implementing the relevant changes in macsec_changelink. Since the handling in macsec_changelink is similar to macsec_upd_offload, update macsec_upd_offload to use a common helper function to avoid duplication. Example for setting offload for a macsec device: ip link set macsec0 type macsec offload mac Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11 17:02:09 +02:00
net: macsec: introduce mdo_insert_tx_tag Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in the ethernet frame. This operation will increase the frame size with up to 32 bytes. If the frames are sent at line rate, the PHY will not have enough room to insert the SecTAG and the ICV. Some PHYs use a hardware buffer to store a number of ethernet frames and, if it fills up, a pause frame is sent to the MAC to control the flow. This HW implementation does not need any modification in the stack. Other PHYs might offer to use a specific ethertype with some padding bytes present in the ethernet frame. This ethertype and its associated bytes will be replaced by the SecTAG and ICV. mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the skb. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:30 +02:00
macsec: add support for IFLA_MACSEC_OFFLOAD in macsec_changelink Add support for changing Macsec offload selection through the netlink layer by implementing the relevant changes in macsec_changelink. Since the handling in macsec_changelink is similar to macsec_upd_offload, update macsec_upd_offload to use a common helper function to avoid duplication. Example for setting offload for a macsec device: ip link set macsec0 type macsec offload mac Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11 17:02:09 +02:00
net: macsec: introduce mdo_insert_tx_tag Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in the ethernet frame. This operation will increase the frame size with up to 32 bytes. If the frames are sent at line rate, the PHY will not have enough room to insert the SecTAG and the ICV. Some PHYs use a hardware buffer to store a number of ethernet frames and, if it fills up, a pause frame is sent to the MAC to control the flow. This HW implementation does not need any modification in the stack. Other PHYs might offer to use a specific ethertype with some padding bytes present in the ethernet frame. This ethertype and its associated bytes will be replaced by the SecTAG and ICV. mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the skb. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:30 +02:00
macsec: add support for IFLA_MACSEC_OFFLOAD in macsec_changelink Add support for changing Macsec offload selection through the netlink layer by implementing the relevant changes in macsec_changelink. Since the handling in macsec_changelink is similar to macsec_upd_offload, update macsec_upd_offload to use a common helper function to avoid duplication. Example for setting offload for a macsec device: ip link set macsec0 type macsec offload mac Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11 17:02:09 +02:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
macsec: add support for IFLA_MACSEC_OFFLOAD in macsec_changelink Add support for changing Macsec offload selection through the netlink layer by implementing the relevant changes in macsec_changelink. Since the handling in macsec_changelink is similar to macsec_upd_offload, update macsec_upd_offload to use a common helper function to avoid duplication. Example for setting offload for a macsec device: ip link set macsec0 type macsec offload mac Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11 17:02:09 +02:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
macsec: add support for IFLA_MACSEC_OFFLOAD in macsec_changelink Add support for changing Macsec offload selection through the netlink layer by implementing the relevant changes in macsec_changelink. Since the handling in macsec_changelink is similar to macsec_upd_offload, update macsec_upd_offload to use a common helper function to avoid duplication. Example for setting offload for a macsec device: ip link set macsec0 type macsec offload mac Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11 17:02:09 +02:00
net: macsec: fix net device access prior to holding a lock Currently macsec offload selection update routine accesses the net device prior to holding the relevant lock. Fix by holding the lock prior to the device access. Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Link: https://lore.kernel.org/r/20221211075532.28099-1-ehakim@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-11 09:55:32 +02:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
net: macsec: fix net device access prior to holding a lock Currently macsec offload selection update routine accesses the net device prior to holding the relevant lock. Fix by holding the lock prior to the device access. Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Link: https://lore.kernel.org/r/20221211075532.28099-1-ehakim@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-11 09:55:32 +02:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
net: macsec: fix net device access prior to holding a lock Currently macsec offload selection update routine accesses the net device prior to holding the relevant lock. Fix by holding the lock prior to the device access. Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Link: https://lore.kernel.org/r/20221211075532.28099-1-ehakim@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-11 09:55:32 +02:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
net: macsec: fix net device access prior to holding a lock Currently macsec offload selection update routine accesses the net device prior to holding the relevant lock. Fix by holding the lock prior to the device access. Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Link: https://lore.kernel.org/r/20221211075532.28099-1-ehakim@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-11 09:55:32 +02:00
macsec: fix NULL dereference in macsec_upd_offload() macsec_upd_offload() gets the value of MACSEC_OFFLOAD_ATTR_TYPE without checking its presence in the request message, and this causes a NULL dereference. Fix it rejecting any configuration that does not include this attribute. Reported-and-tested-by: syzbot+7022ab7c383875c17eff@syzkaller.appspotmail.com Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-06 11:38:29 +02:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
macsec: add support for IFLA_MACSEC_OFFLOAD in macsec_changelink Add support for changing Macsec offload selection through the netlink layer by implementing the relevant changes in macsec_changelink. Since the handling in macsec_changelink is similar to macsec_upd_offload, update macsec_upd_offload to use a common helper function to avoid duplication. Example for setting offload for a macsec device: ip link set macsec0 type macsec offload mac Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11 17:02:09 +02:00
net: macsec: fix net device access prior to holding a lock Currently macsec offload selection update routine accesses the net device prior to holding the relevant lock. Fix by holding the lock prior to the device access. Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Link: https://lore.kernel.org/r/20221211075532.28099-1-ehakim@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-11 09:55:32 +02:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers). Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26 15:22:14 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers). Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26 15:22:14 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers). Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26 15:22:14 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers). Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26 15:22:14 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers). Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26 15:22:14 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers). Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26 15:22:14 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 11:13:06 +02:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: add noinline tag to avoid a frame size warning seen with debug config: drivers/net/macsec.c: In function 'dump_secy': drivers/net/macsec.c:2597: warning: the frame size of 2216 bytes is larger than 2048 bytes [-Wframe-larger-than=] just mark it with noinline_for_stack, this is netlink dump code. v2: use 'static noinline_for_stack int' consistently Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01 22:59:09 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: fix genlmsg_nlhdr() According to the description, first argument of genlmsg_nlhdr() points to what genlmsg_put() returns, i.e. beginning of user header. Therefore we should only subtract size of genetlink header and netlink message header, not user header. This also means we don't need to pass the pointer to genetlink family and the same is true for genl_dump_check_consistent() which is the only caller of genlmsg_nlhdr(). (Note that at the moment, these functions are only used for families which do not have user header so that they are not affected.) Fixes: 670dc2833d14 ("netlink: advertise incomplete dumps") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15 13:09:32 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 11:13:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 11:13:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 11:13:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 11:13:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: key identifier is 128 bits, not 64 The MACsec standard mentions a key identifier for each key, but doesn't specify anything about it, so I arbitrarily chose 64 bits. IEEE 802.1X-2010 specifies MKA (MACsec Key Agreement), and defines the key identifier to be 128 bits (96 bits "member identifier" + 32 bits "key number"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-07 20:19:29 +02:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 11:13:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 11:13:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 11:13:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 11:13:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 11:13:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
netlink: make nla_nest_start() add NLA_F_NESTED flag Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 11:13:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for getting offloaded stats When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:37 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: key identifier is 128 bits, not 64 The MACsec standard mentions a key identifier for each key, but doesn't specify anything about it, so I arbitrarily chose 64 bits. IEEE 802.1X-2010 specifies MKA (MACsec Key Agreement), and defines the key identifier to be 128 bits (96 bits "member identifier" + 32 bits "key number"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-07 20:19:29 +02:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: add consistency check to netlink dumps Use genl_dump_check_consistent in dump_secy. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:05 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: take rtnl lock before for_each_netdev Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:02 +02:00
macsec: add consistency check to netlink dumps Use genl_dump_check_consistent in dump_secy. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:05 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: take rtnl lock before for_each_netdev Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:02 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: move to smaller ops wherever possible Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02 14:49:54 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: optionally validate strictly/dumps Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:31 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: optionally validate strictly/dumps Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:31 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: optionally validate strictly/dumps Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:31 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: optionally validate strictly/dumps Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:31 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: optionally validate strictly/dumps Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:31 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: optionally validate strictly/dumps Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:31 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: optionally validate strictly/dumps Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:31 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: optionally validate strictly/dumps Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:31 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: optionally validate strictly/dumps Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:31 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: optionally validate strictly/dumps Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:31 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add nla support for changing the offloading selection MACsec offloading to underlying hardware devices is disabled by default (the software implementation is used). This patch adds support for changing this setting through the MACsec netlink interface. Many checks are done when enabling offloading on a given MACsec interface as there are limitations (it must be supported by the hardware, only a single interface can be offloaded on a given physical device at a time, rules can't be moved for now). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:44 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: mark families as __ro_after_init Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24 14:40:05 +02:00
genetlink: statically initialize families Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24 14:40:03 +02:00
genetlink: make policy common to family Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21 22:51:02 +01:00
genetlink: statically initialize families Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24 14:40:03 +02:00
genetlink: move to smaller ops wherever possible Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02 14:49:54 -07:00
genetlink: start to validate reserved header bytes We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel) Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-24 17:18:30 -07:00
genetlink: statically initialize families Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24 14:40:03 +02:00
net: macsec: introduce mdo_insert_tx_tag Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in the ethernet frame. This operation will increase the frame size with up to 32 bytes. If the frames are sent at line rate, the PHY will not have enough room to insert the SecTAG and the ICV. Some PHYs use a hardware buffer to store a number of ethernet frames and, if it fills up, a pause frame is sent to the MAC to control the flow. This HW implementation does not need any modification in the stack. Other PHYs might offer to use a specific ethertype with some padding bytes present in the ethernet frame. This ethertype and its associated bytes will be replaced by the SecTAG and ICV. mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the skb. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:30 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net/macsec: Add MACsec skb_metadata_dst Tx Data path support In the current MACsec offload implementation, MACsec interfaces shares the same MAC address by default. Therefore, HW can't distinguish from which MACsec interface the traffic originated from. MACsec stack will use skb_metadata_dst to store the SCI value, which is unique per Macsec interface, skb_metadat_dst will be used by the offloading device driver to associate the SKB with the corresponding offloaded interface (SCI). Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:13 -07:00
net: macsec: introduce mdo_insert_tx_tag Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in the ethernet frame. This operation will increase the frame size with up to 32 bytes. If the frames are sent at line rate, the PHY will not have enough room to insert the SecTAG and the ICV. Some PHYs use a hardware buffer to store a number of ethernet frames and, if it fills up, a pause frame is sent to the MAC to control the flow. This HW implementation does not need any modification in the stack. Other PHYs might offer to use a specific ethertype with some padding bytes present in the ethernet frame. This ethertype and its associated bytes will be replaced by the SecTAG and ICV. mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the skb. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:30 +02:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: set actual real device for xmit when !protect_frames Avoid recursions of dev_queue_xmit() to the wrong net device when frames are unprotected, since at that time skb->dev still points to our own macsec dev and unlike macsec_encrypt_finish() dev pointer doesn't get updated to real underlying device. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01 00:00:54 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use DEV_STATS_INC() syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04 17:26:52 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Fix traffic counters/statistics OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-08 15:38:23 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use DEV_STATS_INC() syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04 17:26:52 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
Revert "net: macsec: report real_dev features when HW offloading is enabled" This reverts commit c850240b6c4132574a00f2da439277ab94265b66. That commit tried to improve the performance of macsec offload by taking advantage of some of the NIC's features, but in doing so, broke macsec offload when the lower device supports both macsec and ipsec offload, as the ipsec offload feature flags (mainly NETIF_F_HW_ESP) were copied from the real device. Since the macsec device doesn't provide xdo_* ops, the XFRM core rejects the registration of the new macsec device in xfrm_api_check. Example perf trace when running ip link add link eni1np1 type macsec port 4 offload mac ip 737 [003] 795.477676: probe:xfrm_dev_event__REGISTER name="macsec0" features=0x1c000080014869 xfrm_dev_event+0x3a notifier_call_chain+0x47 register_netdevice+0x846 macsec_newlink+0x25a ip 737 [003] 795.477687: probe:xfrm_dev_event__return ret=0x8002 (NOTIFY_BAD) notifier_call_chain+0x47 register_netdevice+0x846 macsec_newlink+0x25a dev->features includes NETIF_F_HW_ESP (0x04000000000000), so xfrm_api_check returns NOTIFY_BAD because we don't have dev->xfrmdev_ops on the macsec device. We could probably propagate GSO and a few other features from the lower device, similar to macvlan. This will be done in a future patch. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02 22:33:12 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix lockdep splats when nesting devices Currently, trying to setup a vlan over a macsec device, or other combinations of devices, triggers a lockdep warning. Use netdev_lockdep_set_classes and ndo_get_lock_subclass, similar to what macvlan does. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12 16:10:32 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: enable GRO and RPS on macsec devices Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 18:11:32 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: enable GRO and RPS on macsec devices Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 18:11:32 +02:00
net: macsec: Leverage core stats allocator With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of in this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Remove the allocation in the macsec driver and leverage the network core allocation instead. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20240305113728.1974944-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 03:37:27 -08:00
macsec: enable GRO and RPS on macsec devices Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 18:11:32 +02:00
Revert "net: macsec: report real_dev features when HW offloading is enabled" This reverts commit c850240b6c4132574a00f2da439277ab94265b66. That commit tried to improve the performance of macsec offload by taking advantage of some of the NIC's features, but in doing so, broke macsec offload when the lower device supports both macsec and ipsec offload, as the ipsec offload feature flags (mainly NETIF_F_HW_ESP) were copied from the real device. Since the macsec device doesn't provide xdo_* ops, the XFRM core rejects the registration of the new macsec device in xfrm_api_check. Example perf trace when running ip link add link eni1np1 type macsec port 4 offload mac ip 737 [003] 795.477676: probe:xfrm_dev_event__REGISTER name="macsec0" features=0x1c000080014869 xfrm_dev_event+0x3a notifier_call_chain+0x47 register_netdevice+0x846 macsec_newlink+0x25a ip 737 [003] 795.477687: probe:xfrm_dev_event__return ret=0x8002 (NOTIFY_BAD) notifier_call_chain+0x47 register_netdevice+0x846 macsec_newlink+0x25a dev->features includes NETIF_F_HW_ESP (0x04000000000000), so xfrm_api_check returns NOTIFY_BAD because we don't have dev->xfrmdev_ops on the macsec device. We could probably propagate GSO and a few other features from the lower device, similar to macvlan. This will be done in a future patch. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02 22:33:12 +01:00
net: macsec: Leverage core stats allocator With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of in this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Remove the allocation in the macsec driver and leverage the network core allocation instead. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20240305113728.1974944-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05 03:37:27 -08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: introduce mdo_insert_tx_tag Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in the ethernet frame. This operation will increase the frame size with up to 32 bytes. If the frames are sent at line rate, the PHY will not have enough room to insert the SecTAG and the ICV. Some PHYs use a hardware buffer to store a number of ethernet frames and, if it fills up, a pause frame is sent to the MAC to control the flow. This HW implementation does not need any modification in the stack. Other PHYs might offer to use a specific ethertype with some padding bytes present in the ethernet frame. This ethertype and its associated bytes will be replaced by the SecTAG and ICV. mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the skb. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:30 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix UAF bug for real_dev Create a new macsec device but not get reference to real_dev. That can not ensure that real_dev is freed after macsec. That will trigger the UAF bug for real_dev as following: ================================================================== BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 Call Trace: ... macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 dev_get_iflink+0x73/0xe0 net/core/dev.c:637 default_operstate net/core/link_watch.c:42 [inline] rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54 linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161 Allocated by task 22209: ... alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549 rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235 veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748 Freed by task 8: ... kfree+0xd6/0x4d0 mm/slub.c:4552 kvfree+0x42/0x50 mm/util.c:615 device_release+0x9f/0x240 drivers/base/core.c:2229 kobject_cleanup lib/kobject.c:673 [inline] kobject_release lib/kobject.c:704 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1c8/0x540 lib/kobject.c:721 netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327 After commit faab39f63c1f ("net: allow out-of-order netdev unregistration") and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we can add dev_hold_track() in macsec_dev_init() and dev_put_track() in macsec_free_netdev() to fix the problem. Fixes: 2bce1ebed17d ("macsec: fix refcnt leak in module exit routine") Reported-by: syzbot+d0e94b65ac259c29ce7a@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/r/20220531074500.1272846-1-william.xuanziyang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-31 15:45:00 +08:00
net: rename reference+tracking helpers Netdev reference helpers have a dev_ prefix for historic reasons. Renaming the old helpers would be too much churn but we can rename the tracking ones which are relatively recent and should be the default for new code. Rename: dev_hold_track() -> netdev_hold() dev_put_track() -> netdev_put() dev_replace_track() -> netdev_ref_replace() Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-07 21:39:55 -07:00
macsec: fix UAF bug for real_dev Create a new macsec device but not get reference to real_dev. That can not ensure that real_dev is freed after macsec. That will trigger the UAF bug for real_dev as following: ================================================================== BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 Call Trace: ... macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 dev_get_iflink+0x73/0xe0 net/core/dev.c:637 default_operstate net/core/link_watch.c:42 [inline] rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54 linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161 Allocated by task 22209: ... alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549 rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235 veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748 Freed by task 8: ... kfree+0xd6/0x4d0 mm/slub.c:4552 kvfree+0x42/0x50 mm/util.c:615 device_release+0x9f/0x240 drivers/base/core.c:2229 kobject_cleanup lib/kobject.c:673 [inline] kobject_release lib/kobject.c:704 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1c8/0x540 lib/kobject.c:721 netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327 After commit faab39f63c1f ("net: allow out-of-order netdev unregistration") and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we can add dev_hold_track() in macsec_dev_init() and dev_put_track() in macsec_free_netdev() to fix the problem. Fixes: 2bce1ebed17d ("macsec: fix refcnt leak in module exit routine") Reported-by: syzbot+d0e94b65ac259c29ce7a@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/r/20220531074500.1272846-1-william.xuanziyang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-31 15:45:00 +08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: enable GRO and RPS on macsec devices Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 18:11:32 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
Revert "net: macsec: report real_dev features when HW offloading is enabled" This reverts commit c850240b6c4132574a00f2da439277ab94265b66. That commit tried to improve the performance of macsec offload by taking advantage of some of the NIC's features, but in doing so, broke macsec offload when the lower device supports both macsec and ipsec offload, as the ipsec offload feature flags (mainly NETIF_F_HW_ESP) were copied from the real device. Since the macsec device doesn't provide xdo_* ops, the XFRM core rejects the registration of the new macsec device in xfrm_api_check. Example perf trace when running ip link add link eni1np1 type macsec port 4 offload mac ip 737 [003] 795.477676: probe:xfrm_dev_event__REGISTER name="macsec0" features=0x1c000080014869 xfrm_dev_event+0x3a notifier_call_chain+0x47 register_netdevice+0x846 macsec_newlink+0x25a ip 737 [003] 795.477687: probe:xfrm_dev_event__return ret=0x8002 (NOTIFY_BAD) notifier_call_chain+0x47 register_netdevice+0x846 macsec_newlink+0x25a dev->features includes NETIF_F_HW_ESP (0x04000000000000), so xfrm_api_check returns NOTIFY_BAD because we don't have dev->xfrmdev_ops on the macsec device. We could probably propagate GSO and a few other features from the lower device, similar to macvlan. This will be done in a future patch. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02 22:33:12 +01:00
macsec: enable GRO and RPS on macsec devices Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 18:11:32 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: init secy pointer in macsec_context This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:34 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: revert the MAC address if mdo_upd_secy fails Revert the MAC address if mdo_upd_secy fails. Offloaded MACsec device might be left in an inconsistent state. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:29 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: revert the MAC address if mdo_upd_secy fails Revert the MAC address if mdo_upd_secy fails. Offloaded MACsec device might be left in an inconsistent state. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:29 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: revert the MAC address if mdo_upd_secy fails Revert the MAC address if mdo_upd_secy fails. Offloaded MACsec device might be left in an inconsistent state. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:29 +02:00
net: use eth_hw_addr_set() instead of ether_addr_copy() Convert from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01 14:32:22 -07:00
net: macsec: invoke mdo_upd_secy callback when mac address changed Notify the offload engine about MAC address change to reconfigure it accordingly. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10 18:22:25 +03:00
net: macsec: revert the MAC address if mdo_upd_secy fails Revert the MAC address if mdo_upd_secy fails. Offloaded MACsec device might be left in an inconsistent state. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:29 +02:00
net: macsec: invoke mdo_upd_secy callback when mac address changed Notify the offload engine about MAC address change to reconfigure it accordingly. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10 18:22:25 +03:00
net: macsec: revert the MAC address if mdo_upd_secy fails Revert the MAC address if mdo_upd_secy fails. Offloaded MACsec device might be left in an inconsistent state. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:29 +02:00
net: macsec: invoke mdo_upd_secy callback when mac address changed Notify the offload engine about MAC address change to reconfigure it accordingly. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10 18:22:25 +03:00
net: macsec: revert the MAC address if mdo_upd_secy fails Revert the MAC address if mdo_upd_secy fails. Offloaded MACsec device might be left in an inconsistent state. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:29 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: revert the MAC address if mdo_upd_secy fails Revert the MAC address if mdo_upd_secy fails. Offloaded MACsec device might be left in an inconsistent state. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:29 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: make ndo_get_stats64 a void function The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 19:12:52 -08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: make ndo_get_stats64 a void function The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06 19:12:52 -08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: use new function dev_fetch_sw_netstats Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/0d81e0f7-7784-42df-8e10-d0b77ca5b7ee@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12 10:04:11 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: add DEV_STATS_READ() helper Companion of DEV_STATS_INC() & DEV_STATS_ADD(). This is going to be used in the series. Use it in macsec_get_stats64(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-21 08:52:16 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
rtnetlink: prepare nla_put_iflink() to run under RCU We want to be able to run rtnl_fill_ifinfo() under RCU protection instead of RTNL in the future. This patch prepares dev_get_iflink() and nla_put_iflink() to run either with RTNL or RCU held. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-22 10:50:08 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: add missing attribute validation for port Add missing attribute validation for IFLA_MACSEC_PORT to the netlink policy. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-02 21:05:17 -08:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: add missing attribute validation for offload Add missing attribute validation for IFLA_MACSEC_OFFLOAD to the netlink policy. Fixes: 791bb3fcafce ("net: macsec: add support for specifying offload upon link creation") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20221207101618.989-1-ehakim@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-07 12:16:18 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: don't free NULL metadata_dst Commit 0a28bfd4971f added a metadata_dst to each tx_sc, but that's only allocated when macsec_add_dev has run, which happens after device registration. If the requested or computed SCI already exists, or if linking to the lower device fails, we will panic because metadata_dst_free can't handle NULL. Reproducer: ip link add link $lower type macsec ip link add link $lower type macsec Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/60f2a1965fe553e2cade9472407d0fafff8de8ce.1663923580.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23 11:07:09 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix UAF bug for real_dev Create a new macsec device but not get reference to real_dev. That can not ensure that real_dev is freed after macsec. That will trigger the UAF bug for real_dev as following: ================================================================== BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 Call Trace: ... macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 dev_get_iflink+0x73/0xe0 net/core/dev.c:637 default_operstate net/core/link_watch.c:42 [inline] rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54 linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161 Allocated by task 22209: ... alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549 rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235 veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748 Freed by task 8: ... kfree+0xd6/0x4d0 mm/slub.c:4552 kvfree+0x42/0x50 mm/util.c:615 device_release+0x9f/0x240 drivers/base/core.c:2229 kobject_cleanup lib/kobject.c:673 [inline] kobject_release lib/kobject.c:704 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1c8/0x540 lib/kobject.c:721 netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327 After commit faab39f63c1f ("net: allow out-of-order netdev unregistration") and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we can add dev_hold_track() in macsec_dev_init() and dev_put_track() in macsec_free_netdev() to fix the problem. Fixes: 2bce1ebed17d ("macsec: fix refcnt leak in module exit routine") Reported-by: syzbot+d0e94b65ac259c29ce7a@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/r/20220531074500.1272846-1-william.xuanziyang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-31 15:45:00 +08:00
net: rename reference+tracking helpers Netdev reference helpers have a dev_ prefix for historic reasons. Renaming the old helpers would be too much churn but we can rename the tracking ones which are relatively recent and should be the default for new code. Rename: dev_hold_track() -> netdev_hold() dev_put_track() -> netdev_put() dev_replace_track() -> netdev_ref_replace() Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-07 21:39:55 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: use core MTU range checking in core net infra geneve: - Merge __geneve_change_mtu back into geneve_change_mtu, set max_mtu - This one isn't quite as straight-forward as others, could use some closer inspection and testing macvlan: - set min/max_mtu tun: - set min/max_mtu, remove tun_net_change_mtu vxlan: - Merge __vxlan_change_mtu back into vxlan_change_mtu - Set max_mtu to IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function - This one is also not as straight-forward and could use closer inspection and testing from vxlan folks bridge: - set max_mtu of IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function openvswitch: - set min/max_mtu, remove internal_dev_change_mtu - note: max_mtu wasn't checked previously, it's been set to 65535, which is the largest possible size supported sch_teql: - set min/max_mtu (note: max_mtu previously unchecked, used max of 65535) macsec: - min_mtu = 0, max_mtu = 65535 macvlan: - min_mtu = 0, max_mtu = 65535 ntb_netdev: - min_mtu = 0, max_mtu = 65535 veth: - min_mtu = 68, max_mtu = 65535 8021q: - min_mtu = 0, max_mtu = 65535 CC: netdev@vger.kernel.org CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Tom Herbert <tom@herbertland.com> CC: Daniel Borkmann <daniel@iogearbox.net> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Paolo Abeni <pabeni@redhat.com> CC: Jiri Benc <jbenc@redhat.com> CC: WANG Cong <xiyou.wangcong@gmail.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Pravin B Shelar <pshelar@ovn.org> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Patrick McHardy <kaber@trash.net> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Pravin Shelar <pshelar@nicira.com> CC: Maxim Krasnyansky <maxk@qti.qualcomm.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20 13:55:20 -04:00
macsec: Convert to using IFF_NO_QUEUE Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 14:02:42 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: Fix inconsistent teardown and release of private netdev state. Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08 12:52:56 -04:00
macsec: set network devtype The netdevice type structure for macsec was being defined but never used. To set the network device type the macro SET_NETDEV_DEVTYPE must be called. Compile tested only, I don't use macsec. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-07 14:07:32 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: restore uAPI after addition of GCM-AES-256 Commit ccfdec908922 ("macsec: Add support for GCM-AES-256 cipher suite") changed a few values in the uapi headers for MACsec. Because of existing userspace implementations, we need to preserve the value of MACSEC_DEFAULT_CIPHER_ID. Not doing that resulted in wpa_supplicant segfaults when a secure channel was created using the default cipher. Thus, swap MACSEC_DEFAULT_CIPHER_{ID,ALT} back to their original values. Changing the maximum length of the MACSEC_SA_ATTR_KEY attribute is unnecessary, as the previous value (MACSEC_MAX_KEY_LEN, which was 128B) is large enough to carry 32-bytes keys. This patch reverts MACSEC_MAX_KEY_LEN to 128B and restores the old length check on MACSEC_SA_ATTR_KEY. Fixes: ccfdec908922 ("macsec: Add support for GCM-AES-256 cipher suite") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18 17:48:18 +01:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: limit replay window size with XPN IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value of the replay window is 2^30-1, to help with recovery of the upper bits of the PN. To avoid leaving the existing macsec device in an inconsistent state if this test fails during changelink, reuse the cleanup mechanism introduced for HW offload. This wasn't needed until now because macsec_changelink_common could not fail during changelink, as modifying the cipher suite was not allowed. Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so that secy->xpn is set. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 11:16:29 +02:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: add netlink_ext_ack argument to rtnl_link_ops.changelink Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25 23:56:00 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: add support for IFLA_MACSEC_OFFLOAD in macsec_changelink Add support for changing Macsec offload selection through the netlink layer by implementing the relevant changes in macsec_changelink. Since the handling in macsec_changelink is similar to macsec_upd_offload, update macsec_upd_offload to use a common helper function to avoid duplication. Example for setting offload for a macsec device: ip link set macsec0 type macsec offload mac Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11 17:02:09 +02:00
net: macsec: fix using wrong structure in macsec_changelink() In the macsec_changelink(), "struct macsec_tx_sa tx_sc" is used to store "macsec_secy.tx_sc". But, the struct type of tx_sc is macsec_tx_sc, not macsec_tx_sa. So, the macsec_tx_sc should be used instead. Test commands: ip link add dummy0 type dummy ip link add macsec0 link dummy0 type macsec ip link set macsec0 type macsec encrypt off Splat looks like: [61119.963483][ T9335] ================================================================== [61119.964709][ T9335] BUG: KASAN: slab-out-of-bounds in macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.965787][ T9335] Read of size 160 at addr ffff888020d69c68 by task ip/9335 [61119.966699][ T9335] [61119.966979][ T9335] CPU: 0 PID: 9335 Comm: ip Not tainted 5.6.0+ #503 [61119.967791][ T9335] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [61119.968914][ T9335] Call Trace: [61119.969324][ T9335] dump_stack+0x96/0xdb [61119.969809][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.970554][ T9335] print_address_description.constprop.5+0x1be/0x360 [61119.971294][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.971973][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.972703][ T9335] __kasan_report+0x12a/0x170 [61119.973323][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.973942][ T9335] kasan_report+0xe/0x20 [61119.974397][ T9335] check_memory_region+0x149/0x1a0 [61119.974866][ T9335] memcpy+0x1f/0x50 [61119.975209][ T9335] macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.975825][ T9335] ? macsec_get_stats64+0x3e0/0x3e0 [macsec] [61119.976451][ T9335] ? kernel_text_address+0x111/0x120 [61119.976990][ T9335] ? pskb_expand_head+0x25f/0xe10 [61119.977503][ T9335] ? stack_trace_save+0x82/0xb0 [61119.977986][ T9335] ? memset+0x1f/0x40 [61119.978397][ T9335] ? __nla_validate_parse+0x98/0x1ab0 [61119.978936][ T9335] ? macsec_alloc_tfm+0x90/0x90 [macsec] [61119.979511][ T9335] ? __kasan_slab_free+0x111/0x150 [61119.980021][ T9335] ? kfree+0xce/0x2f0 [61119.980700][ T9335] ? netlink_trim+0x196/0x1f0 [61119.981420][ T9335] ? nla_memcpy+0x90/0x90 [61119.982036][ T9335] ? register_lock_class+0x19e0/0x19e0 [61119.982776][ T9335] ? memcpy+0x34/0x50 [61119.983327][ T9335] __rtnl_newlink+0x922/0x1270 [ ... ] Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-09 14:08:08 +00:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: limit replay window size with XPN IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value of the replay window is 2^30-1, to help with recovery of the upper bits of the PN. To avoid leaving the existing macsec device in an inconsistent state if this test fails during changelink, reuse the cleanup mechanism introduced for HW offload. This wasn't needed until now because macsec_changelink_common could not fail during changelink, as modifying the cipher suite was not allowed. Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so that secy->xpn is set. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 11:16:29 +02:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: add support for IFLA_MACSEC_OFFLOAD in macsec_changelink Add support for changing Macsec offload selection through the netlink layer by implementing the relevant changes in macsec_changelink. Since the handling in macsec_changelink is similar to macsec_upd_offload, update macsec_upd_offload to use a common helper function to avoid duplication. Example for setting offload for a macsec device: ip link set macsec0 type macsec offload mac Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11 17:02:09 +02:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: add support for IFLA_MACSEC_OFFLOAD in macsec_changelink Add support for changing Macsec offload selection through the netlink layer by implementing the relevant changes in macsec_changelink. Since the handling in macsec_changelink is similar to macsec_upd_offload, update macsec_upd_offload to use a common helper function to avoid duplication. Example for setting offload for a macsec device: ip link set macsec0 type macsec offload mac Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11 17:02:09 +02:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use after free when deleting the underlying device macsec_notify() loops over the list of macsec devices configured on the underlying device when this device is being removed. This list is part of the rx_handler data. However, macsec_dellink unregisters the rx_handler and frees the rx_handler data when the last macsec device is removed from the underlying device. Add macsec_common_dellink() to delete macsec devices without unregistering the rx_handler and freeing the associated data. Fixes: 960d5848dbf1 ("macsec: fix memory leaks around rx_handler (un)registration") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11 15:24:27 +02:00
macsec: fix lockdep splats when nesting devices Currently, trying to setup a vlan over a macsec device, or other combinations of devices, triggers a lockdep warning. Use netdev_lockdep_set_classes and ndo_get_lock_subclass, similar to what macvlan does. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12 16:10:32 +02:00
macsec: use after free when deleting the underlying device macsec_notify() loops over the list of macsec devices configured on the underlying device when this device is being removed. This list is part of the rx_handler data. However, macsec_dellink unregisters the rx_handler and frees the rx_handler data when the last macsec device is removed from the underlying device. Add macsec_common_dellink() to delete macsec devices without unregistering the rx_handler and freeing the associated data. Fixes: 960d5848dbf1 ("macsec: fix memory leaks around rx_handler (un)registration") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11 15:24:27 +02:00
net: macsec: Fix offload support for NETDEV_UNREGISTER event Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources. Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-30 13:29:01 +02:00
macsec: use after free when deleting the underlying device macsec_notify() loops over the list of macsec devices configured on the underlying device when this device is being removed. This list is part of the rx_handler data. However, macsec_dellink unregisters the rx_handler and frees the rx_handler data when the last macsec device is removed from the underlying device. Add macsec_common_dellink() to delete macsec devices without unregistering the rx_handler and freeing the associated data. Fixes: 960d5848dbf1 ("macsec: fix memory leaks around rx_handler (un)registration") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11 15:24:27 +02:00
macsec: fix lockdep splats when nesting devices Currently, trying to setup a vlan over a macsec device, or other combinations of devices, triggers a lockdep warning. Use netdev_lockdep_set_classes and ndo_get_lock_subclass, similar to what macvlan does. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12 16:10:32 +02:00
macsec: use after free when deleting the underlying device macsec_notify() loops over the list of macsec devices configured on the underlying device when this device is being removed. This list is part of the rx_handler data. However, macsec_dellink unregisters the rx_handler and frees the rx_handler data when the last macsec device is removed from the underlying device. Add macsec_common_dellink() to delete macsec devices without unregistering the rx_handler and freeing the associated data. Fixes: 960d5848dbf1 ("macsec: fix memory leaks around rx_handler (un)registration") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11 15:24:27 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use after free when deleting the underlying device macsec_notify() loops over the list of macsec devices configured on the underlying device when this device is being removed. This list is part of the rx_handler data. However, macsec_dellink unregisters the rx_handler and frees the rx_handler data when the last macsec device is removed from the underlying device. Add macsec_common_dellink() to delete macsec devices without unregistering the rx_handler and freeing the associated data. Fixes: 960d5848dbf1 ("macsec: fix memory leaks around rx_handler (un)registration") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11 15:24:27 +02:00
macsec: add consistency check to netlink dumps Use genl_dump_check_consistent in dump_secy. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:05 +02:00
macsec: fix memory leaks around rx_handler (un)registration We leak a struct macsec_rxh_data when we unregister the rx_handler in macsec_dellink. We also leak a struct macsec_rxh_data in register_macsec_dev if we fail to register the rx_handler. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix memory leaks around rx_handler (un)registration We leak a struct macsec_rxh_data when we unregister the rx_handler in macsec_dellink. We also leak a struct macsec_rxh_data in register_macsec_dev if we fail to register the rx_handler. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix memory leaks around rx_handler (un)registration We leak a struct macsec_rxh_data when we unregister the rx_handler in macsec_dellink. We also leak a struct macsec_rxh_data in register_macsec_dev if we fail to register the rx_handler. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix memory leaks around rx_handler (un)registration We leak a struct macsec_rxh_data when we unregister the rx_handler in macsec_dellink. We also leak a struct macsec_rxh_data in register_macsec_dev if we fail to register the rx_handler. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:06 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
Revert "net: macsec: update SCI upon MAC address change." This reverts commit 6fc498bc82929ee23aa2f35a828c6178dfd3f823. Commit 6fc498bc8292 states: SCI should be updated, because it contains MAC in its first 6 octets. That's not entirely correct. The SCI can be based on the MAC address, but doesn't have to be. We can also use any 64-bit number as the SCI. When the SCI based on the MAC address, it uses a 16-bit "port number" provided by userspace, which commit 6fc498bc8292 overwrites with 1. In addition, changing the SCI after macsec has been setup can just confuse the receiver. If we configure the RXSC on the peer based on the original SCI, we should keep the same SCI on TX. When the macsec device is being managed by a userspace key negotiation daemon such as wpa_supplicant, commit 6fc498bc8292 would also overwrite the SCI defined by userspace. Fixes: 6fc498bc8292 ("net: macsec: update SCI upon MAC address change.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/9b1a9d28327e7eb54550a92eebda45d25e54dd0d.1660667033.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 14:54:36 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: fix double free of percpu stats Inside macsec_add_dev() we free percpu macsec->secy.tx_sc.stats and macsec->stats on some of the memory allocation failure paths. However, the net_device is already registered to that moment: in macsec_newlink(), just before calling macsec_add_dev(). This means that during unregister process its priv_destructor - macsec_free_netdev() - will be called and will free the stats again. Remove freeing percpu stats inside macsec_add_dev() because macsec_free_netdev() will correctly free the already allocated ones. The pointers to unallocated stats stay NULL, and free_percpu() treats that correctly. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-13 22:22:20 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net/macsec: Add MACsec skb_metadata_dst Tx Data path support In the current MACsec offload implementation, MACsec interfaces shares the same MAC address by default. Therefore, HW can't distinguish from which MACsec interface the traffic originated from. MACsec stack will use skb_metadata_dst to store the SCI value, which is unique per Macsec interface, skb_metadat_dst will be used by the offloading device driver to associate the SKB with the corresponding offloaded interface (SCI). Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:13 -07:00
net: macsec: fix double free of percpu stats Inside macsec_add_dev() we free percpu macsec->secy.tx_sc.stats and macsec->stats on some of the memory allocation failure paths. However, the net_device is already registered to that moment: in macsec_newlink(), just before calling macsec_add_dev(). This means that during unregister process its priv_destructor - macsec_free_netdev() - will be called and will free the stats again. Remove freeing percpu stats inside macsec_add_dev() because macsec_free_netdev() will correctly free the already allocated ones. The pointers to unallocated stats stay NULL, and free_percpu() treats that correctly. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-13 22:22:20 +03:00
net/macsec: Add MACsec skb_metadata_dst Tx Data path support In the current MACsec offload implementation, MACsec interfaces shares the same MAC address by default. Therefore, HW can't distinguish from which MACsec interface the traffic originated from. MACsec stack will use skb_metadata_dst to store the SCI value, which is unique per Macsec interface, skb_metadat_dst will be used by the offloading device driver to associate the SKB with the corresponding offloaded interface (SCI). Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:13 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net/macsec: Add MACsec skb_metadata_dst Tx Data path support In the current MACsec offload implementation, MACsec interfaces shares the same MAC address by default. Therefore, HW can't distinguish from which MACsec interface the traffic originated from. MACsec stack will use skb_metadata_dst to store the SCI value, which is unique per Macsec interface, skb_metadat_dst will be used by the offloading device driver to associate the SKB with the corresponding offloaded interface (SCI). Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:13 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: change addr_list_lock back to static key The dynamic key update for addr_list_lock still causes troubles, for example the following race condition still exists: CPU 0: CPU 1: (RCU read lock) (RTNL lock) dev_mc_seq_show() netdev_update_lockdep_key() -> lockdep_unregister_key() -> netif_addr_lock_bh() because lockdep doesn't provide an API to update it atomically. Therefore, we have to move it back to static keys and use subclass for nest locking like before. In commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), I already reverted most parts of commit ab92d68fc22f ("net: core: add generic lockdep keys"). This patch reverts the rest and also part of commit f3b0a18bb6cb ("net: remove unnecessary variables and callback"). After this patch, addr_list_lock changes back to using static keys and subclasses to satisfy lockdep. Thanks to dev->lower_level, we do not have to change back to ->ndo_get_lock_subclass(). And hopefully this reduces some syzbot lockdep noises too. Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com Cc: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-08 14:53:01 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: add netlink_ext_ack argument to rtnl_link_ops.newlink Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25 23:55:59 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: avoid to set wrong mtu When a macsec interface is created, the mtu is calculated with the lower interface's mtu value. If the mtu of lower interface is lower than the length, which is needed by macsec interface, macsec's mtu value will be overflowed. So, if the lower interface's mtu is too low, macsec interface's mtu should be set to 0. Test commands: ip link add dummy0 mtu 10 type dummy ip link add macsec0 link dummy0 type macsec ip link show macsec0 Before: 11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274 After: 11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0 Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23 13:40:47 +00:00
net/macsec: Move some code for sharing with various drivers that implements offload Move some MACsec infrastructure like defines and functions, in order to avoid code duplication for future drivers which implements MACsec offload. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ben Ben-Ishay <benishay@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:15 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: avoid to set wrong mtu When a macsec interface is created, the mtu is calculated with the lower interface's mtu value. If the mtu of lower interface is lower than the length, which is needed by macsec interface, macsec's mtu value will be overflowed. So, if the lower interface's mtu is too low, macsec interface's mtu should be set to 0. Test commands: ip link add dummy0 mtu 10 type dummy ip link add macsec0 link dummy0 type macsec ip link show macsec0 Before: 11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274 After: 11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0 Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23 13:40:47 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: restrict to ethernet devices Only attach macsec to ethernet devices. Syzbot was able to trigger a KMSAN warning in macsec_handle_frame by attaching to a phonet device. Macvlan has a similar check in macvlan_port_create. v1->v2 - fix commit message typo Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-22 13:51:13 -04:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for specifying offload upon link creation This patch adds new netlink attribute to allow a user to (optionally) specify the desired offload mode immediately upon MACSec link creation. Separate iproute patch will be required to support this from user space. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 16:01:34 +03:00
net: macsec: hardware offloading infrastructure This patch introduces the MACsec hardware offloading infrastructure. The main idea here is to re-use the logic and data structures of the software MACsec implementation. This allows not to duplicate definitions and structure storing the same kind of information. It also allows to use a unified genlink interface for both MACsec implementations (so that the same userspace tool, `ip macsec`, is used with the same arguments). The MACsec offloading support cannot be disabled if an interface supports it at the moment. The MACsec configuration is passed to device drivers supporting it through macsec_ops which are called from the MACsec genl helpers. Those functions call the macsec ops of PHY and Ethernet drivers in two steps: a preparation one, and a commit one. The first step is allowed to fail and should be used to check if a provided configuration is compatible with the features provided by a MACsec engine, while the second step is not allowed to fail and should only be used to enable a given MACsec configuration. Two extra calls are made: when a virtual MACsec interface is created and when it is deleted, so that the hardware driver can stay in sync. The Rx and TX handlers are modified to take in account the special case were the MACsec transformation happens in the hardware, whether in a PHY or in a MAC, as the packets seen by the networking stack on both the physical and MACsec virtual interface are exactly the same. This leads to some limitations: the hardware and software implementations can't be used on the same physical interface, as the policies would be impossible to fulfill (such as strict validation of the frames). Also only a single virtual MACsec interface can be offloaded to a physical port supporting hardware offloading as it would be impossible to guess onto which interface a given packet should go (for ingress traffic). Another limitation as of now is that the counters and statistics are not reported back from the hardware to the software MACsec implementation. This isn't an issue when using offloaded MACsec transformations, but it should be added in the future so that the MACsec state can be reported to the user (which would also improve the debug). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-13 23:31:43 +01:00
net: macsec: Verify that send_sci is on when setting Tx sci explicitly When setting Tx sci explicit, the Rx side is expected to use this sci and not recalculate it from the packet.However, in case of Tx sci is explicit and send_sci is off, the receiver is wrongly recalculate the sci from the source MAC address which most likely be different than the explicit sci. Fix by preventing such configuration when macsec newlink is established and return EINVAL error code on such cases. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-30 13:37:52 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: avoid to set wrong mtu When a macsec interface is created, the mtu is calculated with the lower interface's mtu value. If the mtu of lower interface is lower than the length, which is needed by macsec interface, macsec's mtu value will be overflowed. So, if the lower interface's mtu is too low, macsec interface's mtu should be set to 0. Test commands: ip link add dummy0 mtu 10 type dummy ip link add macsec0 link dummy0 type macsec ip link show macsec0 Before: 11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274 After: 11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0 Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23 13:40:47 +00:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: partially revert dynamic lockdep key changes This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02 22:22:19 -07:00
net: get rid of lockdep_set_class_and_subclass() lockdep_set_class_and_subclass() is meant to reduce the _nested() annotations by assigning a default subclass. For addr_list_lock, we have to compute the subclass at run-time as the netdevice topology changes after creation. So, we should just get rid of these lockdep_set_class_and_subclass() and stick with our _nested() annotations. Fixes: 845e0ebb4408 ("net: change addr_list_lock back to static key") Suggested-by: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 11:24:22 -07:00
net: partially revert dynamic lockdep key changes This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02 22:22:19 -07:00
net: Add extack to upper device linking Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 17:48:47 -07:00
macsec: fix lockdep splats when nesting devices Currently, trying to setup a vlan over a macsec device, or other combinations of devices, triggers a lockdep warning. Use netdev_lockdep_set_classes and ndo_get_lock_subclass, similar to what macvlan does. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12 16:10:32 +02:00
Revert "macsec: missing dev_put() on error in macsec_newlink()" This patch is just wrong, sorry. I was trying to fix a static checker warning and misread the code. The reference taken in macsec_newlink() is released in macsec_free_netdev() when the netdevice is destroyed. This reverts commit 5dcd8400884cc4a043a6d4617e042489e5d566a9. Reported-by: Laura Abbott <labbott@redhat.com> Fixes: 5dcd8400884c ("macsec: missing dev_put() on error in macsec_newlink()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16 13:17:50 +03:00
macsec: fix lockdep splats when nesting devices Currently, trying to setup a vlan over a macsec device, or other combinations of devices, triggers a lockdep warning. Use netdev_lockdep_set_classes and ndo_get_lock_subclass, similar to what macvlan does. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12 16:10:32 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix lockdep splats when nesting devices Currently, trying to setup a vlan over a macsec device, or other combinations of devices, triggers a lockdep warning. Use netdev_lockdep_set_classes and ndo_get_lock_subclass, similar to what macvlan does. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12 16:10:32 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix lockdep splats when nesting devices Currently, trying to setup a vlan over a macsec device, or other combinations of devices, triggers a lockdep warning. Use netdev_lockdep_set_classes and ndo_get_lock_subclass, similar to what macvlan does. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12 16:10:32 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: macsec: add support for specifying offload upon link creation This patch adds new netlink attribute to allow a user to (optionally) specify the desired offload mode immediately upon MACSec link creation. Separate iproute patch will be required to support this from user space. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 16:01:34 +03:00
net: macsec: introduce mdo_insert_tx_tag Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in the ethernet frame. This operation will increase the frame size with up to 32 bytes. If the frames are sent at line rate, the PHY will not have enough room to insert the SecTAG and the ICV. Some PHYs use a hardware buffer to store a number of ethernet frames and, if it fills up, a pause frame is sent to the MAC to control the flow. This HW implementation does not need any modification in the stack. Other PHYs might offer to use a specific ethertype with some padding bytes present in the ethernet frame. This ethertype and its associated bytes will be replaced by the SecTAG and ICV. mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the skb. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19 16:53:30 +02:00
net: macsec: add support for specifying offload upon link creation This patch adds new netlink attribute to allow a user to (optionally) specify the desired offload mode immediately upon MACSec link creation. Separate iproute patch will be required to support this from user space. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 16:01:34 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: update operstate when lower device changes Like all other virtual devices (macvlan, vlan), the operstate of a macsec device should match the state of its lower device. This is done by calling netif_stacked_transfer_operstate from its netdevice notifier. We also need to call netif_stacked_transfer_operstate when a new macsec device is created, so that its operstate is set properly. This is only relevant when we try to bring the device up directly when we create it. Radu Rendec proposed a similar patch, inspired from the 802.1q driver, that included changing the administrative state of the macsec device, instead of just the operstate. This version is similar to what the macvlan driver does, and updates only the operstate. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Radu Rendec <radu.rendec@gmail.com> Reported-by: Patrick Talbert <ptalbert@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-28 09:33:09 +01:00
macsec: add consistency check to netlink dumps Use genl_dump_check_consistent in dump_secy. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:05 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix lockdep splats when nesting devices Currently, trying to setup a vlan over a macsec device, or other combinations of devices, triggers a lockdep warning. Use netdev_lockdep_set_classes and ndo_get_lock_subclass, similar to what macvlan does. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12 16:10:32 +02:00
Revert "macsec: missing dev_put() on error in macsec_newlink()" This patch is just wrong, sorry. I was trying to fix a static checker warning and misread the code. The reference taken in macsec_newlink() is released in macsec_free_netdev() when the netdevice is destroyed. This reverts commit 5dcd8400884cc4a043a6d4617e042489e5d566a9. Reported-by: Laura Abbott <labbott@redhat.com> Fixes: 5dcd8400884c ("macsec: missing dev_put() on error in macsec_newlink()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16 13:17:50 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net: add netlink_ext_ack argument to rtnl_link_ops.validate Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25 23:56:01 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: add missing macsec prefix in uapi I accidentally forgot some MACSEC_ prefixes in if_macsec.h. Fixes: dece8d2b78d1 ("uapi: add MACsec bits") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:08 +02:00
net/macsec: Move some code for sharing with various drivers that implements offload Move some MACsec infrastructure like defines and functions, in order to avoid code duplication for future drivers which implements MACsec offload. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ben Ben-Ishay <benishay@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:15 -07:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: validate ICV length on link creation Test the cipher suite initialization in case ICV length has a value different than its default. If this test fails, creation of a new macsec link will also fail. This avoids situations where further security associations can't be added due to failures of crypto_aead_setauthsize(), caused by unsupported user-provided values of the ICV length. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:58 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
net/macsec: Move some code for sharing with various drivers that implements offload Move some MACsec infrastructure like defines and functions, in order to avoid code duplication for future drivers which implements MACsec offload. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ben Ben-Ishay <benishay@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05 22:21:15 -07:00
macsec: validate ICV length on link creation Test the cipher suite initialization in case ICV length has a value different than its default. If this test fails, creation of a new macsec link will also fail. This avoids situations where further security associations can't be added due to failures of crypto_aead_setauthsize(), caused by unsupported user-provided values of the ICV length. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:58 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: restore uAPI after addition of GCM-AES-256 Commit ccfdec908922 ("macsec: Add support for GCM-AES-256 cipher suite") changed a few values in the uapi headers for MACsec. Because of existing userspace implementations, we need to preserve the value of MACSEC_DEFAULT_CIPHER_ID. Not doing that resulted in wpa_supplicant segfaults when a secure channel was created using the default cipher. Thus, swap MACSEC_DEFAULT_CIPHER_{ID,ALT} back to their original values. Changing the maximum length of the MACSEC_SA_ATTR_KEY attribute is unnecessary, as the previous value (MACSEC_MAX_KEY_LEN, which was 128B) is large enough to carry 32-bytes keys. This patch reverts MACSEC_MAX_KEY_LEN to 128B and restores the old length check on MACSEC_SA_ATTR_KEY. Fixes: ccfdec908922 ("macsec: Add support for GCM-AES-256 cipher suite") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18 17:48:18 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: limit ICV length to 16 octets IEEE 802.1AE-2006 standard recommends that the ICV element in a MACsec frame should not exceed 16 octets: add MACSEC_STD_ICV_LEN in uapi definitions accordingly, and avoid accepting configurations where the ICV length exceeds the standard value. Leave definition of MACSEC_MAX_ICV_LEN unchanged for backwards compatibility with userspace programs. Fixes: dece8d2b78d1 ("uapi: add MACsec bits") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22 15:07:56 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: fix netlink attribute validation macsec_validate_attr should check IFLA_MACSEC_REPLAY_PROTECT (not IFLA_MACSEC_PROTECT) to verify that the replay protection and replay window arguments are correct. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22 11:28:09 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: add functions to get macsec real netdevice and check offload Given a macsec net_device add two functions to return the real net_device for that device, and check if that macsec device is offloaded or not. This is needed for auxiliary drivers that implement MACsec offload, but have flows which are triggered over the macsec net_device, this allows the drivers in such cases to verify if the device is offloaded or not, and to access the real device of that macsec device, which would belong to the driver, and would be needed for the offload procedure. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2022-05-02 14:40:56 +03:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: remove first zero and add attribute name in comments Remove first zero for add, and use full attribute name in comments. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07 23:02:09 +08:00
macsec: dump IFLA_MACSEC_OFFLOAD attribute as part of macsec dump Support dumping offload netlink attribute in macsec's device attributes dump. Change macsec_get_size to consider the offload attribute in the calculations of the required room for dumping the device netlink attributes. Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11 17:02:10 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: dump IFLA_MACSEC_OFFLOAD attribute as part of macsec dump Support dumping offload netlink attribute in macsec's device attributes dump. Change macsec_get_size to consider the offload attribute in the calculations of the required room for dumping the device netlink attributes. Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11 17:02:10 +02:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: dump IFLA_MACSEC_OFFLOAD attribute as part of macsec dump Support dumping offload netlink attribute in macsec's device attributes dump. Change macsec_get_size to consider the offload attribute in the calculations of the required room for dumping the device netlink attributes. Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11 17:02:10 +02:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw) Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09 19:47:02 +00:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use nla_put_u64_64bit() Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26 10:06:11 +02:00
macsec: Add support for GCM-AES-256 cipher suite This adds support for the GCM-AES-256 cipher suite as specified in IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used, with GCM-AES-128 being the default cipher suite as defined in the standard. Signed-off-by: Felix Walter <felix.walter@cloudandheat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05 14:33:31 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: dump IFLA_MACSEC_OFFLOAD attribute as part of macsec dump Support dumping offload netlink attribute in macsec's device attributes dump. Change macsec_get_size to consider the offload attribute in the calculations of the required room for dumping the device netlink attributes. Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11 17:02:10 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: update operstate when lower device changes Like all other virtual devices (macvlan, vlan), the operstate of a macsec device should match the state of its lower device. This is done by calling netif_stacked_transfer_operstate from its netdevice notifier. We also need to call netif_stacked_transfer_operstate when a new macsec device is created, so that its operstate is set properly. This is only relevant when we try to bring the device up directly when we create it. Radu Rendec proposed a similar patch, inspired from the 802.1q driver, that included changing the administrative state of the macsec device, instead of just the operstate. This version is similar to what the macvlan driver does, and updates only the operstate. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Radu Rendec <radu.rendec@gmail.com> Reported-by: Patrick Talbert <ptalbert@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-28 09:33:09 +01:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use after free when deleting the underlying device macsec_notify() loops over the list of macsec devices configured on the underlying device when this device is being removed. This list is part of the rx_handler data. However, macsec_dellink unregisters the rx_handler and frees the rx_handler data when the last macsec device is removed from the underlying device. Add macsec_common_dellink() to delete macsec devices without unregistering the rx_handler and freeing the associated data. Fixes: 960d5848dbf1 ("macsec: fix memory leaks around rx_handler (un)registration") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11 15:24:27 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: use after free when deleting the underlying device macsec_notify() loops over the list of macsec devices configured on the underlying device when this device is being removed. This list is part of the rx_handler data. However, macsec_dellink unregisters the rx_handler and frees the rx_handler data when the last macsec device is removed from the underlying device. Add macsec_common_dellink() to delete macsec devices without unregistering the rx_handler and freeing the associated data. Fixes: 960d5848dbf1 ("macsec: fix memory leaks around rx_handler (un)registration") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11 15:24:27 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
genetlink: statically initialize families Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24 14:40:03 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: add rcu_barrier() on module exit Without this, the various uses of call_rcu could cause a kernel panic. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 15:25:14 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00
macsec: add genl family module alias This helps tools such as wpa_supplicant can start even if the macsec module isn't loaded yet. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 15:36:08 +02:00
macsec: introduce IEEE 802.1AE driver This is an implementation of MACsec/IEEE 802.1AE. This driver provides authentication and encryption of traffic in a LAN, typically with GCM-AES-128, and optional replay protection. http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 18:07:33 +01:00