kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-28 20:03:05 +00:00
Code Issues Releases Packages Activity
linux/drivers/net/netdevsim/fib.c

1669 lines
41 KiB
Raw Normal View History

netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Allow reporting activity on nexthop buckets A key component of the resilient hashing algorithm is the hash buckets' activity. If a bucket is active, it will not be populated with a new nexthop in order not to break existing flows. Therefore, in order to easily and thoroughly test the algorithm, we need to be in full control over the reported activity. Add a debugfs interface that allows user space to have netdevsim report a nexthop bucket within a resilient nexthop group as active. For example: # echo 10 23 > /sys/kernel/debug/netdevsim/netdevsim10/fib/nexthop_bucket_activity Will mark bucket 23 in nexthop group 10 as active. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:20 +01:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
ipv4: Use dscp_t in struct fib_rt_info Use the new dscp_t type to replace the tos field of struct fib_rt_info. This ensures ECN bits are ignored and makes it compatible with the fa_dscp field of struct fib_alias. This also allows sparse to flag potential incorrect uses of DSCP and ECN bits. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-08 22:08:37 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Convert the current occupancy to an atomic variable When route is added/deleted, the appropriate counter is increased/decreased to maintain number of routes. User can limit the number of routes and then according to the appropriate counter, adding more routes than the limitation is forbidden. Currently, there is one lock which protects hashtable, list and accounting. Handling the counters will be performed from both atomic context and non-atomic context, while the hashtable and the list will be used only from non-atomic context and therefore will be protected by a separate lock. Protect accounting by using an atomic variable, so lock is not needed. v2: * Use atomic64_sub() in nsim_nexthop_account()'s error path Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:48 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Add devlink resource for nexthops The Spectrum ASIC has a dedicated table where nexthops (i.e., adjacency entries) are populated. The size of this table can be controlled via devlink-resource. Add such a resource to netdevsim so that its occupancy will reflect the number of nexthop objects currently programmed to the device. By limiting the size of the resource, error paths could be exercised and tested. Example output: # devlink resource show netdevsim/netdevsim10 netdevsim/netdevsim10: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 4 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 3 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name IPv6 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 1 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 2 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name nexthops size unlimited occ 0 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:37 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Introduce a lock to guard nexthop hashtable Currently netdevsim relies on RTNL to maintain exclusivity in accessing the nexthop hash table. However, bucket notification may be called without RTNL having been held. Instead, introduce a custom lock to guard the table. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:17 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Fix reference count leak on route deletion failure As part of FIB offload simulation, netdevsim stores IPv4 and IPv6 routes and holds a reference on FIB info structures that in turn hold a reference on the associated nexthop device(s). In the unlikely case where we are unable to allocate memory to process a route deletion request, netdevsim will not release the reference from the associated FIB info structure, thereby preventing the associated nexthop device(s) from ever being removed [1]. Fix this by scheduling a work item that will flush netdevsim's FIB table upon route deletion failure. This will cause netdevsim to release its reference from all the FIB info structures in its table. Reported by Lucas Leong of Trend Micro Zero Day Initiative. Fixes: 0ae3eb7b4611 ("netdevsim: fib: Perform the route programming in a non-atomic context") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28 14:45:33 +03:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Introduce a lock to guard nexthop hashtable Currently netdevsim relies on RTNL to maintain exclusivity in accessing the nexthop hash table. However, bucket notification may be called without RTNL having been held. Instead, introduce a custom lock to guard the table. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:17 +01:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: Add support for resilient nexthop groups Allow resilient nexthop groups to be programmed and account their occupancy according to their number of buckets. The nexthop group itself as well as its buckets are marked with hardware flags (i.e., 'RTNH_F_TRAP'). Replacement of a single nexthop bucket can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace Y Replacement of a resilient nexthop group can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace Y This enables testing of various error paths. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:19 +01:00
netdevsim: fib: Add debugfs knob to simulate route deletion failure The previous patch ("netdevsim: fib: Fix reference count leak on route deletion failure") fixed a reference count leak that happens on route deletion failure. Such failures can only be simulated by injecting slab allocation failures, which cannot be surgically injected. In order to be able to specifically test this scenario, add a debugfs knob that allows user space to fail route deletion requests when enabled. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28 14:45:34 +03:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: Use dscp_t in struct nsim_fib4_rt Use the new dscp_t type to replace the tos field of struct nsim_fib4_rt. This ensures ECN bits are ignored and makes it compatible with the dscp fields of struct fib_entry_notifier_info and struct fib_rt_info. This also allows sparse to flag potential incorrect uses of DSCP and ECN bits. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-08 22:08:43 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: Add support for resilient nexthop groups Allow resilient nexthop groups to be programmed and account their occupancy according to their number of buckets. The nexthop group itself as well as its buckets are marked with hardware flags (i.e., 'RTNH_F_TRAP'). Replacement of a single nexthop bucket can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace Y Replacement of a resilient nexthop group can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace Y This enables testing of various error paths. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:19 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Add devlink resource for nexthops The Spectrum ASIC has a dedicated table where nexthops (i.e., adjacency entries) are populated. The size of this table can be controlled via devlink-resource. Add such a resource to netdevsim so that its occupancy will reflect the number of nexthop objects currently programmed to the device. By limiting the size of the resource, error paths could be exercised and tested. Example output: # devlink resource show netdevsim/netdevsim10 netdevsim/netdevsim10: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 4 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 3 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name IPv6 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 1 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 2 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name nexthops size unlimited occ 0 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:37 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Convert the current occupancy to an atomic variable When route is added/deleted, the appropriate counter is increased/decreased to maintain number of routes. User can limit the number of routes and then according to the appropriate counter, adding more routes than the limitation is forbidden. Currently, there is one lock which protects hashtable, list and accounting. Handling the counters will be performed from both atomic context and non-atomic context, while the hashtable and the list will be used only from non-atomic context and therefore will be protected by a separate lock. Protect accounting by using an atomic variable, so lock is not needed. v2: * Use atomic64_sub() in nsim_nexthop_account()'s error path Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:48 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: implement proper devlink reload During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:36 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: Add devlink resource for nexthops The Spectrum ASIC has a dedicated table where nexthops (i.e., adjacency entries) are populated. The size of this table can be controlled via devlink-resource. Add such a resource to netdevsim so that its occupancy will reflect the number of nexthop objects currently programmed to the device. By limiting the size of the resource, error paths could be exercised and tested. Example output: # devlink resource show netdevsim/netdevsim10 netdevsim/netdevsim10: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 4 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 3 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name IPv6 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 1 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 2 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name nexthops size unlimited occ 0 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:37 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: implement proper devlink reload During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:36 +02:00
netdevsim: Add extack error message for devlink reload devlink reset command can fail if a FIB resource limit is set to a value lower than the current occupancy. Return a proper message indicating the reason for the failure. $ devlink resource sh netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 43 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 4 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name IPv6 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 54 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 3 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 40 $ devlink dev reload netdevsim/netdevsim0 Error: netdevsim: New size is less than current occupancy. devlink answers: Invalid argument Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05 08:14:10 -07:00
netdevsim: implement proper devlink reload During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:36 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Convert the current occupancy to an atomic variable When route is added/deleted, the appropriate counter is increased/decreased to maintain number of routes. User can limit the number of routes and then according to the appropriate counter, adding more routes than the limitation is forbidden. Currently, there is one lock which protects hashtable, list and accounting. Handling the counters will be performed from both atomic context and non-atomic context, while the hashtable and the list will be used only from non-atomic context and therefore will be protected by a separate lock. Protect accounting by using an atomic variable, so lock is not needed. v2: * Use atomic64_sub() in nsim_nexthop_account()'s error path Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:48 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Convert the current occupancy to an atomic variable When route is added/deleted, the appropriate counter is increased/decreased to maintain number of routes. User can limit the number of routes and then according to the appropriate counter, adding more routes than the limitation is forbidden. Currently, there is one lock which protects hashtable, list and accounting. Handling the counters will be performed from both atomic context and non-atomic context, while the hashtable and the list will be used only from non-atomic context and therefore will be protected by a separate lock. Protect accounting by using an atomic variable, so lock is not needed. v2: * Use atomic64_sub() in nsim_nexthop_account()'s error path Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:48 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Convert the current occupancy to an atomic variable When route is added/deleted, the appropriate counter is increased/decreased to maintain number of routes. User can limit the number of routes and then according to the appropriate counter, adding more routes than the limitation is forbidden. Currently, there is one lock which protects hashtable, list and accounting. Handling the counters will be performed from both atomic context and non-atomic context, while the hashtable and the list will be used only from non-atomic context and therefore will be protected by a separate lock. Protect accounting by using an atomic variable, so lock is not needed. v2: * Use atomic64_sub() in nsim_nexthop_account()'s error path Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:48 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: Use dscp_t in struct nsim_fib4_rt Use the new dscp_t type to replace the tos field of struct nsim_fib4_rt. This ensures ECN bits are ignored and makes it compatible with the dscp fields of struct fib_entry_notifier_info and struct fib_rt_info. This also allows sparse to flag potential incorrect uses of DSCP and ECN bits. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-08 22:08:43 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
ipv4: Use dscp_t in struct fib_entry_notifier_info Use the new dscp_t type to replace the tos field of struct fib_entry_notifier_info. This ensures ECN bits are ignored and makes it compatible with the dscp field of struct fib_rt_info. This also allows sparse to flag potential incorrect uses of DSCP and ECN bits. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-08 22:08:40 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: Use dscp_t in struct nsim_fib4_rt Use the new dscp_t type to replace the tos field of struct nsim_fib4_rt. This ensures ECN bits are ignored and makes it compatible with the dscp fields of struct fib_entry_notifier_info and struct fib_rt_info. This also allows sparse to flag potential incorrect uses of DSCP and ECN bits. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-08 22:08:43 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
IPv4: Add "offload failed" indication to routes After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. To avoid such cases, previous patch set added the ability to emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed, this behavior is controlled by sysctl. With the above mentioned behavior, it is possible to know from user-space if the route was offloaded, but if the offload fails there is no indication to user-space. Following a failure, a routing daemon will wait indefinitely for a notification that will never come. This patch adds an "offload_failed" indication to IPv4 routes, so that users will have better visibility into the offload process. 'struct fib_alias', and 'struct fib_rt_info' are extended with new field that indicates if route offload failed. Note that the new field is added using unused bit and therefore there is no need to increase structs size. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:50 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Do not warn if route was not found for several events The next patch will add the ability to fail route offload controlled by debugfs variable called "fail_route_offload". If we vetoed the addition, we might get a delete or append notification for a route we do not have. Therefore, do not warn if route was not found. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:54 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Do not warn if route was not found for several events The next patch will add the ability to fail route offload controlled by debugfs variable called "fail_route_offload". If we vetoed the addition, we might get a delete or append notification for a route we do not have. Therefore, do not warn if route was not found. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:54 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fix nsim_fib6_rt_create() error path It seems nsim_fib6_rt_create() intent was to return either a valid pointer or an embedded error code. BUG: unable to handle page fault for address: fffffffffffffff4 PGD 9870067 P4D 9870067 PUD 9872067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 22851 Comm: syz-executor.1 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:jhash2 include/linux/jhash.h:125 [inline] RIP: 0010:rhashtable_jhash2+0x76/0x2c0 lib/rhashtable.c:963 Code: b9 00 00 00 00 00 fc ff df 48 c1 e8 03 0f b6 14 08 4c 89 f0 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 30 02 00 00 49 8d 7e 04 <41> 8b 06 48 be 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 0f b6 RSP: 0018:ffffc90016127190 EFLAGS: 00010246 RAX: 0000000000000007 RBX: 00000000dfb3ab49 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffffffff839ba7c8 RDI: fffffffffffffff8 RBP: ffffc900161271c0 R08: ffff8880951f8640 R09: ffffed1015d0703d R10: ffffed1015d0703c R11: ffff8880ae8381e3 R12: 00000000dfb3ab49 R13: 00000000dfb3ab49 R14: fffffffffffffff4 R15: 0000000000000007 FS: 00007f40bfbc6700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffff4 CR3: 0000000093660000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rht_key_get_hash include/linux/rhashtable.h:133 [inline] rht_key_hashfn include/linux/rhashtable.h:159 [inline] rht_head_hashfn include/linux/rhashtable.h:174 [inline] __rhashtable_insert_fast.constprop.0+0xe15/0x1180 include/linux/rhashtable.h:723 rhashtable_insert_fast include/linux/rhashtable.h:832 [inline] nsim_fib6_rt_add drivers/net/netdevsim/fib.c:603 [inline] nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:658 [inline] nsim_fib6_event drivers/net/netdevsim/fib.c:719 [inline] nsim_fib_event drivers/net/netdevsim/fib.c:744 [inline] nsim_fib_event_nb+0x1b16/0x2600 drivers/net/netdevsim/fib.c:772 notifier_call_chain+0xc2/0x230 kernel/notifier.c:83 __atomic_notifier_call_chain+0xa6/0x1a0 kernel/notifier.c:173 atomic_notifier_call_chain+0x2e/0x40 kernel/notifier.c:183 call_fib_notifiers+0x173/0x2a0 net/core/fib_notifier.c:35 call_fib6_notifiers+0x4b/0x60 net/ipv6/fib6_notifier.c:22 call_fib6_entry_notifiers+0xfb/0x150 net/ipv6/ip6_fib.c:399 fib6_add_rt2node net/ipv6/ip6_fib.c:1216 [inline] fib6_add+0x20cd/0x3ec0 net/ipv6/ip6_fib.c:1471 __ip6_ins_rt+0x54/0x80 net/ipv6/route.c:1315 ip6_ins_rt+0x96/0xd0 net/ipv6/route.c:1325 __ipv6_dev_ac_inc+0x76f/0xb20 net/ipv6/anycast.c:324 ipv6_sock_ac_join+0x4c1/0x790 net/ipv6/anycast.c:139 do_ipv6_setsockopt.isra.0+0x3908/0x4290 net/ipv6/ipv6_sockglue.c:670 ipv6_setsockopt+0xff/0x180 net/ipv6/ipv6_sockglue.c:944 udpv6_setsockopt+0x68/0xb0 net/ipv6/udp.c:1564 sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 __do_sys_setsockopt net/socket.c:2146 [inline] __se_sys_setsockopt net/socket.c:2143 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45aff9 Fixes: 48bb9eb47b27 ("netdevsim: fib: Add dummy implementation for FIB offload") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15 11:57:41 -08:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: remove unneeded semicolon Eliminate the following coccicheck warning: drivers/net/netdevsim/fib.c:569:2-3: Unneeded semicolon Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-06 11:18:13 +08:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Do not warn if route was not found for several events The next patch will add the ability to fail route offload controlled by debugfs variable called "fail_route_offload". If we vetoed the addition, we might get a delete or append notification for a route we do not have. Therefore, do not warn if route was not found. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:54 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt Because fib6_info_hw_flags_set() is called without any synchronization, all accesses to gi6->offload, fi->trap and fi->offload_failed need some basic protection like READ_ONCE()/WRITE_ONCE(). BUG: KCSAN: data-race in fib6_info_hw_flags_set / fib6_purge_rt read to 0xffff8881087d5886 of 1 bytes by task 13953 on cpu 0: fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1007 [inline] fib6_purge_rt+0x4f/0x580 net/ipv6/ip6_fib.c:1033 fib6_del_route net/ipv6/ip6_fib.c:1983 [inline] fib6_del+0x696/0x890 net/ipv6/ip6_fib.c:2028 __ip6_del_rt net/ipv6/route.c:3876 [inline] ip6_del_rt+0x83/0x140 net/ipv6/route.c:3891 __ipv6_dev_ac_dec+0x2b5/0x370 net/ipv6/anycast.c:374 ipv6_dev_ac_dec net/ipv6/anycast.c:387 [inline] __ipv6_sock_ac_close+0x141/0x200 net/ipv6/anycast.c:207 ipv6_sock_ac_close+0x79/0x90 net/ipv6/anycast.c:220 inet6_release+0x32/0x50 net/ipv6/af_inet6.c:476 __sock_release net/socket.c:650 [inline] sock_close+0x6c/0x150 net/socket.c:1318 __fput+0x295/0x520 fs/file_table.c:280 ____fput+0x11/0x20 fs/file_table.c:313 task_work_run+0x8e/0x110 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x160/0x190 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881087d5886 of 1 bytes by task 1912 on cpu 1: fib6_info_hw_flags_set+0x155/0x3b0 net/ipv6/route.c:6230 nsim_fib6_rt_hw_flags_set drivers/net/netdevsim/fib.c:668 [inline] nsim_fib6_rt_add drivers/net/netdevsim/fib.c:691 [inline] nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:756 [inline] nsim_fib6_event drivers/net/netdevsim/fib.c:853 [inline] nsim_fib_event drivers/net/netdevsim/fib.c:886 [inline] nsim_fib_event_work+0x284f/0x2cf0 drivers/net/netdevsim/fib.c:1477 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x22 -> 0x2a Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1912 Comm: kworker/1:3 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events nsim_fib_event_work Fixes: 0c5fcf9e249e ("IPv6: Add "offload failed" indication to routes") Fixes: bb3c4ab93e44 ("ipv6: Add "offload" and "trap" indications to routes") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Amit Cohen <amcohen@nvidia.com> Cc: Ido Schimmel <idosch@nvidia.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220216173217.3792411-2-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-16 09:32:17 -08:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt Because fib6_info_hw_flags_set() is called without any synchronization, all accesses to gi6->offload, fi->trap and fi->offload_failed need some basic protection like READ_ONCE()/WRITE_ONCE(). BUG: KCSAN: data-race in fib6_info_hw_flags_set / fib6_purge_rt read to 0xffff8881087d5886 of 1 bytes by task 13953 on cpu 0: fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1007 [inline] fib6_purge_rt+0x4f/0x580 net/ipv6/ip6_fib.c:1033 fib6_del_route net/ipv6/ip6_fib.c:1983 [inline] fib6_del+0x696/0x890 net/ipv6/ip6_fib.c:2028 __ip6_del_rt net/ipv6/route.c:3876 [inline] ip6_del_rt+0x83/0x140 net/ipv6/route.c:3891 __ipv6_dev_ac_dec+0x2b5/0x370 net/ipv6/anycast.c:374 ipv6_dev_ac_dec net/ipv6/anycast.c:387 [inline] __ipv6_sock_ac_close+0x141/0x200 net/ipv6/anycast.c:207 ipv6_sock_ac_close+0x79/0x90 net/ipv6/anycast.c:220 inet6_release+0x32/0x50 net/ipv6/af_inet6.c:476 __sock_release net/socket.c:650 [inline] sock_close+0x6c/0x150 net/socket.c:1318 __fput+0x295/0x520 fs/file_table.c:280 ____fput+0x11/0x20 fs/file_table.c:313 task_work_run+0x8e/0x110 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x160/0x190 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881087d5886 of 1 bytes by task 1912 on cpu 1: fib6_info_hw_flags_set+0x155/0x3b0 net/ipv6/route.c:6230 nsim_fib6_rt_hw_flags_set drivers/net/netdevsim/fib.c:668 [inline] nsim_fib6_rt_add drivers/net/netdevsim/fib.c:691 [inline] nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:756 [inline] nsim_fib6_event drivers/net/netdevsim/fib.c:853 [inline] nsim_fib_event drivers/net/netdevsim/fib.c:886 [inline] nsim_fib_event_work+0x284f/0x2cf0 drivers/net/netdevsim/fib.c:1477 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x22 -> 0x2a Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1912 Comm: kworker/1:3 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events nsim_fib_event_work Fixes: 0c5fcf9e249e ("IPv6: Add "offload failed" indication to routes") Fixes: bb3c4ab93e44 ("ipv6: Add "offload" and "trap" indications to routes") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Amit Cohen <amcohen@nvidia.com> Cc: Ido Schimmel <idosch@nvidia.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220216173217.3792411-2-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-16 09:32:17 -08:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
net: Do not call fib6_info_hw_flags_set() when IPv6 is disabled With the next patch mlxsw and netdevsim will fail in compilation if CONFIG_IPV6 is disabled. Do not call fib6_info_hw_flags_set() when IPv6 is disabled. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:54 +02:00
net: Pass 'net' struct as first argument to fib6_info_hw_flags_set() The next patch will emit notification when hardware flags are changed, in case that fib_notify_on_flag_change sysctl is set to 1. To know sysctl values, net struct is needed. This change is consistent with the IPv4 version, which gets 'net' struct as its first argument. Currently, the only callers of this function are mlxsw and netdevsim. Patch the callers to pass net. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:53 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
net: Pass 'net' struct as first argument to fib6_info_hw_flags_set() The next patch will emit notification when hardware flags are changed, in case that fib_notify_on_flag_change sysctl is set to 1. To know sysctl values, net struct is needed. This change is consistent with the IPv4 version, which gets 'net' struct as its first argument. Currently, the only callers of this function are mlxsw and netdevsim. Patch the callers to pass net. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:53 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
IPv6: Add "offload failed" indication to routes After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. To avoid such cases, previous patch set added the ability to emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed, this behavior is controlled by sysctl. With the above mentioned behavior, it is possible to know from user-space if the route was offloaded, but if the offload fails there is no indication to user-space. Following a failure, a routing daemon will wait indefinitely for a notification that will never come. This patch adds an "offload_failed" indication to IPv6 routes, so that users will have better visibility into the offload process. 'struct fib6_info' is extended with new field that indicates if route offload failed. Note that the new field is added using unused bit and therefore there is no need to increase struct size. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:52 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
net: Do not call fib6_info_hw_flags_set() when IPv6 is disabled With the next patch mlxsw and netdevsim will fail in compilation if CONFIG_IPV6 is disabled. Do not call fib6_info_hw_flags_set() when IPv6 is disabled. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:54 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
net: Pass 'net' struct as first argument to fib6_info_hw_flags_set() The next patch will emit notification when hardware flags are changed, in case that fib_notify_on_flag_change sysctl is set to 1. To know sysctl values, net struct is needed. This change is consistent with the IPv4 version, which gets 'net' struct as its first argument. Currently, the only callers of this function are mlxsw and netdevsim. Patch the callers to pass net. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:53 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
net: Pass 'net' struct as first argument to fib6_info_hw_flags_set() The next patch will emit notification when hardware flags are changed, in case that fib_notify_on_flag_change sysctl is set to 1. To know sysctl values, net struct is needed. This change is consistent with the IPv4 version, which gets 'net' struct as its first argument. Currently, the only callers of this function are mlxsw and netdevsim. Patch the callers to pass net. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:53 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
net: Pass 'net' struct as first argument to fib6_info_hw_flags_set() The next patch will emit notification when hardware flags are changed, in case that fib_notify_on_flag_change sysctl is set to 1. To know sysctl values, net struct is needed. This change is consistent with the IPv4 version, which gets 'net' struct as its first argument. Currently, the only callers of this function are mlxsw and netdevsim. Patch the callers to pass net. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:53 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fix nsim_fib6_rt_create() error path It seems nsim_fib6_rt_create() intent was to return either a valid pointer or an embedded error code. BUG: unable to handle page fault for address: fffffffffffffff4 PGD 9870067 P4D 9870067 PUD 9872067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 22851 Comm: syz-executor.1 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:jhash2 include/linux/jhash.h:125 [inline] RIP: 0010:rhashtable_jhash2+0x76/0x2c0 lib/rhashtable.c:963 Code: b9 00 00 00 00 00 fc ff df 48 c1 e8 03 0f b6 14 08 4c 89 f0 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 30 02 00 00 49 8d 7e 04 <41> 8b 06 48 be 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 0f b6 RSP: 0018:ffffc90016127190 EFLAGS: 00010246 RAX: 0000000000000007 RBX: 00000000dfb3ab49 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffffffff839ba7c8 RDI: fffffffffffffff8 RBP: ffffc900161271c0 R08: ffff8880951f8640 R09: ffffed1015d0703d R10: ffffed1015d0703c R11: ffff8880ae8381e3 R12: 00000000dfb3ab49 R13: 00000000dfb3ab49 R14: fffffffffffffff4 R15: 0000000000000007 FS: 00007f40bfbc6700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffff4 CR3: 0000000093660000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rht_key_get_hash include/linux/rhashtable.h:133 [inline] rht_key_hashfn include/linux/rhashtable.h:159 [inline] rht_head_hashfn include/linux/rhashtable.h:174 [inline] __rhashtable_insert_fast.constprop.0+0xe15/0x1180 include/linux/rhashtable.h:723 rhashtable_insert_fast include/linux/rhashtable.h:832 [inline] nsim_fib6_rt_add drivers/net/netdevsim/fib.c:603 [inline] nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:658 [inline] nsim_fib6_event drivers/net/netdevsim/fib.c:719 [inline] nsim_fib_event drivers/net/netdevsim/fib.c:744 [inline] nsim_fib_event_nb+0x1b16/0x2600 drivers/net/netdevsim/fib.c:772 notifier_call_chain+0xc2/0x230 kernel/notifier.c:83 __atomic_notifier_call_chain+0xa6/0x1a0 kernel/notifier.c:173 atomic_notifier_call_chain+0x2e/0x40 kernel/notifier.c:183 call_fib_notifiers+0x173/0x2a0 net/core/fib_notifier.c:35 call_fib6_notifiers+0x4b/0x60 net/ipv6/fib6_notifier.c:22 call_fib6_entry_notifiers+0xfb/0x150 net/ipv6/ip6_fib.c:399 fib6_add_rt2node net/ipv6/ip6_fib.c:1216 [inline] fib6_add+0x20cd/0x3ec0 net/ipv6/ip6_fib.c:1471 __ip6_ins_rt+0x54/0x80 net/ipv6/route.c:1315 ip6_ins_rt+0x96/0xd0 net/ipv6/route.c:1325 __ipv6_dev_ac_inc+0x76f/0xb20 net/ipv6/anycast.c:324 ipv6_sock_ac_join+0x4c1/0x790 net/ipv6/anycast.c:139 do_ipv6_setsockopt.isra.0+0x3908/0x4290 net/ipv6/ipv6_sockglue.c:670 ipv6_setsockopt+0xff/0x180 net/ipv6/ipv6_sockglue.c:944 udpv6_setsockopt+0x68/0xb0 net/ipv6/udp.c:1564 sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 __do_sys_setsockopt net/socket.c:2146 [inline] __se_sys_setsockopt net/socket.c:2143 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45aff9 Fixes: 48bb9eb47b27 ("netdevsim: fib: Add dummy implementation for FIB offload") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15 11:57:41 -08:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Remove redundant code Fix the following coccicheck warnings: ./drivers/net/netdevsim/fib.c:874:5-8: Unneeded variable: "err". Return "0" on line 889. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-11 15:11:01 +08:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add debugfs knob to simulate route deletion failure The previous patch ("netdevsim: fib: Fix reference count leak on route deletion failure") fixed a reference count leak that happens on route deletion failure. Such failures can only be simulated by injecting slab allocation failures, which cannot be surgically injected. In order to be able to specifically test this scenario, add a debugfs knob that allows user space to fail route deletion requests when enabled. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28 14:45:34 +03:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add debugfs knob to simulate route deletion failure The previous patch ("netdevsim: fib: Fix reference count leak on route deletion failure") fixed a reference count leak that happens on route deletion failure. Such failures can only be simulated by injecting slab allocation failures, which cannot be surgically injected. In order to be able to specifically test this scenario, add a debugfs knob that allows user space to fail route deletion requests when enabled. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28 14:45:34 +03:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Fix reference count leak on route deletion failure As part of FIB offload simulation, netdevsim stores IPv4 and IPv6 routes and holds a reference on FIB info structures that in turn hold a reference on the associated nexthop device(s). In the unlikely case where we are unable to allocate memory to process a route deletion request, netdevsim will not release the reference from the associated FIB info structure, thereby preventing the associated nexthop device(s) from ever being removed [1]. Fix this by scheduling a work item that will flush netdevsim's FIB table upon route deletion failure. This will cause netdevsim to release its reference from all the FIB info structures in its table. Reported by Lucas Leong of Trend Micro Zero Day Initiative. Fixes: 0ae3eb7b4611 ("netdevsim: fib: Perform the route programming in a non-atomic context") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28 14:45:33 +03:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Fix reference count leak on route deletion failure As part of FIB offload simulation, netdevsim stores IPv4 and IPv6 routes and holds a reference on FIB info structures that in turn hold a reference on the associated nexthop device(s). In the unlikely case where we are unable to allocate memory to process a route deletion request, netdevsim will not release the reference from the associated FIB info structure, thereby preventing the associated nexthop device(s) from ever being removed [1]. Fix this by scheduling a work item that will flush netdevsim's FIB table upon route deletion failure. This will cause netdevsim to release its reference from all the FIB info structures in its table. Reported by Lucas Leong of Trend Micro Zero Day Initiative. Fixes: 0ae3eb7b4611 ("netdevsim: fib: Perform the route programming in a non-atomic context") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28 14:45:33 +03:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
treewide: Use fallthrough pseudo-keyword Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
treewide: Use fallthrough pseudo-keyword Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
net: Pass 'net' struct as first argument to fib6_info_hw_flags_set() The next patch will emit notification when hardware flags are changed, in case that fib_notify_on_flag_change sysctl is set to 1. To know sysctl values, net struct is needed. This change is consistent with the IPv4 version, which gets 'net' struct as its first argument. Currently, the only callers of this function are mlxsw and netdevsim. Patch the callers to pass net. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:53 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: fib: Convert the current occupancy to an atomic variable When route is added/deleted, the appropriate counter is increased/decreased to maintain number of routes. User can limit the number of routes and then according to the appropriate counter, adding more routes than the limitation is forbidden. Currently, there is one lock which protects hashtable, list and accounting. Handling the counters will be performed from both atomic context and non-atomic context, while the hashtable and the list will be used only from non-atomic context and therefore will be protected by a separate lock. Protect accounting by using an atomic variable, so lock is not needed. v2: * Use atomic64_sub() in nsim_nexthop_account()'s error path Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:48 +02:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
nexthop: Use enum to encode notification type Currently there are only two types of in-kernel nexthop notification. The two are distinguished by the 'is_grp' boolean field in 'struct nh_notifier_info'. As more notification types are introduced for more next-hop group types, a boolean is not an easily extensible interface. Instead, convert it to an enum. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28 13:49:17 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
nexthop: Use enum to encode notification type Currently there are only two types of in-kernel nexthop notification. The two are distinguished by the 'is_grp' boolean field in 'struct nh_notifier_info'. As more notification types are introduced for more next-hop group types, a boolean is not an easily extensible interface. Instead, convert it to an enum. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28 13:49:17 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
nexthop: Use enum to encode notification type Currently there are only two types of in-kernel nexthop notification. The two are distinguished by the 'is_grp' boolean field in 'struct nh_notifier_info'. As more notification types are introduced for more next-hop group types, a boolean is not an easily extensible interface. Instead, convert it to an enum. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28 13:49:17 +01:00
netdevsim: Add support for resilient nexthop groups Allow resilient nexthop groups to be programmed and account their occupancy according to their number of buckets. The nexthop group itself as well as its buckets are marked with hardware flags (i.e., 'RTNH_F_TRAP'). Replacement of a single nexthop bucket can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace Y Replacement of a resilient nexthop group can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace Y This enables testing of various error paths. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:19 +01:00
nexthop: Use enum to encode notification type Currently there are only two types of in-kernel nexthop notification. The two are distinguished by the 'is_grp' boolean field in 'struct nh_notifier_info'. As more notification types are introduced for more next-hop group types, a boolean is not an easily extensible interface. Instead, convert it to an enum. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28 13:49:17 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Convert the current occupancy to an atomic variable When route is added/deleted, the appropriate counter is increased/decreased to maintain number of routes. User can limit the number of routes and then according to the appropriate counter, adding more routes than the limitation is forbidden. Currently, there is one lock which protects hashtable, list and accounting. Handling the counters will be performed from both atomic context and non-atomic context, while the hashtable and the list will be used only from non-atomic context and therefore will be protected by a separate lock. Protect accounting by using an atomic variable, so lock is not needed. v2: * Use atomic64_sub() in nsim_nexthop_account()'s error path Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:48 +02:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Convert the current occupancy to an atomic variable When route is added/deleted, the appropriate counter is increased/decreased to maintain number of routes. User can limit the number of routes and then according to the appropriate counter, adding more routes than the limitation is forbidden. Currently, there is one lock which protects hashtable, list and accounting. Handling the counters will be performed from both atomic context and non-atomic context, while the hashtable and the list will be used only from non-atomic context and therefore will be protected by a separate lock. Protect accounting by using an atomic variable, so lock is not needed. v2: * Use atomic64_sub() in nsim_nexthop_account()'s error path Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:48 +02:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Convert the current occupancy to an atomic variable When route is added/deleted, the appropriate counter is increased/decreased to maintain number of routes. User can limit the number of routes and then according to the appropriate counter, adding more routes than the limitation is forbidden. Currently, there is one lock which protects hashtable, list and accounting. Handling the counters will be performed from both atomic context and non-atomic context, while the hashtable and the list will be used only from non-atomic context and therefore will be protected by a separate lock. Protect accounting by using an atomic variable, so lock is not needed. v2: * Use atomic64_sub() in nsim_nexthop_account()'s error path Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:48 +02:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Convert the current occupancy to an atomic variable When route is added/deleted, the appropriate counter is increased/decreased to maintain number of routes. User can limit the number of routes and then according to the appropriate counter, adding more routes than the limitation is forbidden. Currently, there is one lock which protects hashtable, list and accounting. Handling the counters will be performed from both atomic context and non-atomic context, while the hashtable and the list will be used only from non-atomic context and therefore will be protected by a separate lock. Protect accounting by using an atomic variable, so lock is not needed. v2: * Use atomic64_sub() in nsim_nexthop_account()'s error path Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:48 +02:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Convert the current occupancy to an atomic variable When route is added/deleted, the appropriate counter is increased/decreased to maintain number of routes. User can limit the number of routes and then according to the appropriate counter, adding more routes than the limitation is forbidden. Currently, there is one lock which protects hashtable, list and accounting. Handling the counters will be performed from both atomic context and non-atomic context, while the hashtable and the list will be used only from non-atomic context and therefore will be protected by a separate lock. Protect accounting by using an atomic variable, so lock is not needed. v2: * Use atomic64_sub() in nsim_nexthop_account()'s error path Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:48 +02:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: Create a helper for setting nexthop hardware flags Instead of calling nexthop_set_hw_flags(), call a helper. It will be used to also set nexthop bucket flags in a subsequent patch. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:18 +01:00
netdevsim: Add support for resilient nexthop groups Allow resilient nexthop groups to be programmed and account their occupancy according to their number of buckets. The nexthop group itself as well as its buckets are marked with hardware flags (i.e., 'RTNH_F_TRAP'). Replacement of a single nexthop bucket can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace Y Replacement of a resilient nexthop group can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace Y This enables testing of various error paths. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:19 +01:00
netdevsim: Create a helper for setting nexthop hardware flags Instead of calling nexthop_set_hw_flags(), call a helper. It will be used to also set nexthop bucket flags in a subsequent patch. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:18 +01:00
netdevsim: Add support for resilient nexthop groups Allow resilient nexthop groups to be programmed and account their occupancy according to their number of buckets. The nexthop group itself as well as its buckets are marked with hardware flags (i.e., 'RTNH_F_TRAP'). Replacement of a single nexthop bucket can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace Y Replacement of a resilient nexthop group can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace Y This enables testing of various error paths. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:19 +01:00
netdevsim: Create a helper for setting nexthop hardware flags Instead of calling nexthop_set_hw_flags(), call a helper. It will be used to also set nexthop bucket flags in a subsequent patch. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:18 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: Create a helper for setting nexthop hardware flags Instead of calling nexthop_set_hw_flags(), call a helper. It will be used to also set nexthop bucket flags in a subsequent patch. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:18 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: Create a helper for setting nexthop hardware flags Instead of calling nexthop_set_hw_flags(), call a helper. It will be used to also set nexthop bucket flags in a subsequent patch. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:18 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
nexthop: Use enum to encode notification type Currently there are only two types of in-kernel nexthop notification. The two are distinguished by the 'is_grp' boolean field in 'struct nh_notifier_info'. As more notification types are introduced for more next-hop group types, a boolean is not an easily extensible interface. Instead, convert it to an enum. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28 13:49:17 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: Add support for resilient nexthop groups Allow resilient nexthop groups to be programmed and account their occupancy according to their number of buckets. The nexthop group itself as well as its buckets are marked with hardware flags (i.e., 'RTNH_F_TRAP'). Replacement of a single nexthop bucket can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace Y Replacement of a resilient nexthop group can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace Y This enables testing of various error paths. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:19 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Introduce a lock to guard nexthop hashtable Currently netdevsim relies on RTNL to maintain exclusivity in accessing the nexthop hash table. However, bucket notification may be called without RTNL having been held. Instead, introduce a custom lock to guard the table. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:17 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: Add support for resilient nexthop groups Allow resilient nexthop groups to be programmed and account their occupancy according to their number of buckets. The nexthop group itself as well as its buckets are marked with hardware flags (i.e., 'RTNH_F_TRAP'). Replacement of a single nexthop bucket can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace Y Replacement of a resilient nexthop group can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace Y This enables testing of various error paths. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:19 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Introduce a lock to guard nexthop hashtable Currently netdevsim relies on RTNL to maintain exclusivity in accessing the nexthop hash table. However, bucket notification may be called without RTNL having been held. Instead, introduce a custom lock to guard the table. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:17 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: Create a helper for setting nexthop hardware flags Instead of calling nexthop_set_hw_flags(), call a helper. It will be used to also set nexthop bucket flags in a subsequent patch. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:18 +01:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: Allow reporting activity on nexthop buckets A key component of the resilient hashing algorithm is the hash buckets' activity. If a bucket is active, it will not be populated with a new nexthop in order not to break existing flows. Therefore, in order to easily and thoroughly test the algorithm, we need to be in full control over the reported activity. Add a debugfs interface that allows user space to have netdevsim report a nexthop bucket within a resilient nexthop group as active. For example: # echo 10 23 > /sys/kernel/debug/netdevsim/netdevsim10/fib/nexthop_bucket_activity Will mark bucket 23 in nexthop group 10 as active. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:20 +01:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: create devlink instance per netdevsim instance Currently there is one devlink instance created per network namespace. That is quite odd considering the fact that devlink instance should represent an ASIC. The following patches are going to move the devlink instance even more down to a bus device, but until then, have one devlink instance per netdevsim instance. Struct nsim_devlink is introduced to hold fib setting. The changes in the fib code are only related to holding the configuration per devlink instance instead of network namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:42 +02:00
netdevsim: Add devlink resource for nexthops The Spectrum ASIC has a dedicated table where nexthops (i.e., adjacency entries) are populated. The size of this table can be controlled via devlink-resource. Add such a resource to netdevsim so that its occupancy will reflect the number of nexthop objects currently programmed to the device. By limiting the size of the resource, error paths could be exercised and tested. Example output: # devlink resource show netdevsim/netdevsim10 netdevsim/netdevsim10: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 4 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 3 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name IPv6 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 1 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 2 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name nexthops size unlimited occ 0 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:37 +02:00
netdevsim: implement proper devlink reload During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:36 +02:00
netdevsim: make array res_ids static const, makes object smaller Don't populate the array res_ids on the stack but instead it static const. Makes the object code smaller by 14 bytes. Before: text data bss dec hex filename 50833 8314 256 59403 e80b ./drivers/net/netdevsim/fib.o After: text data bss dec hex filename 50755 8378 256 59389 e7fd ./drivers/net/netdevsim/fib.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801065328.138906-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-01 07:53:28 +01:00
netdevsim: implement proper devlink reload During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:36 +02:00
netdevsim: Add devlink resource for nexthops The Spectrum ASIC has a dedicated table where nexthops (i.e., adjacency entries) are populated. The size of this table can be controlled via devlink-resource. Add such a resource to netdevsim so that its occupancy will reflect the number of nexthop objects currently programmed to the device. By limiting the size of the resource, error paths could be exercised and tested. Example output: # devlink resource show netdevsim/netdevsim10 netdevsim/netdevsim10: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 4 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 3 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name IPv6 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 1 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 2 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name nexthops size unlimited occ 0 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:37 +02:00
netdevsim: implement proper devlink reload During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:36 +02:00
netdevsim: convert driver to use unlocked devlink API during init/fini Prepare for devlink reload being called with devlink->lock held and convert the netdevsim driver to use unlocked devlink API during init and fini flows. Take devl_lock() in reload_down() and reload_up() ops in the meantime before reload cmd is converted to take the lock itself. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-16 13:02:40 +02:00
netdevsim: implement proper devlink reload During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:36 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Fix reference count leak on route deletion failure As part of FIB offload simulation, netdevsim stores IPv4 and IPv6 routes and holds a reference on FIB info structures that in turn hold a reference on the associated nexthop device(s). In the unlikely case where we are unable to allocate memory to process a route deletion request, netdevsim will not release the reference from the associated FIB info structure, thereby preventing the associated nexthop device(s) from ever being removed [1]. Fix this by scheduling a work item that will flush netdevsim's FIB table upon route deletion failure. This will cause netdevsim to release its reference from all the FIB info structures in its table. Reported by Lucas Leong of Trend Micro Zero Day Initiative. Fixes: 0ae3eb7b4611 ("netdevsim: fib: Perform the route programming in a non-atomic context") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28 14:45:33 +03:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: Add support for resilient nexthop groups Allow resilient nexthop groups to be programmed and account their occupancy according to their number of buckets. The nexthop group itself as well as its buckets are marked with hardware flags (i.e., 'RTNH_F_TRAP'). Replacement of a single nexthop bucket can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace Y Replacement of a resilient nexthop group can fail using the following debugfs knob: # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace N # echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace # cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace Y This enables testing of various error paths. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:19 +01:00
netdevsim: Allow reporting activity on nexthop buckets A key component of the resilient hashing algorithm is the hash buckets' activity. If a bucket is active, it will not be populated with a new nexthop in order not to break existing flows. Therefore, in order to easily and thoroughly test the algorithm, we need to be in full control over the reported activity. Add a debugfs interface that allows user space to have netdevsim report a nexthop bucket within a resilient nexthop group as active. For example: # echo 10 23 > /sys/kernel/debug/netdevsim/netdevsim10/fib/nexthop_bucket_activity Will mark bucket 23 in nexthop group 10 as active. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:20 +01:00
netdevsim: fib: Add debugfs knob to simulate route deletion failure The previous patch ("netdevsim: fib: Fix reference count leak on route deletion failure") fixed a reference count leak that happens on route deletion failure. Such failures can only be simulated by injecting slab allocation failures, which cannot be surgically injected. In order to be able to specifically test this scenario, add a debugfs knob that allows user space to fail route deletion requests when enabled. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28 14:45:34 +03:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: implement proper devlink reload During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:36 +02:00
netdevsim: create devlink instance per netdevsim instance Currently there is one devlink instance created per network namespace. That is quite odd considering the fact that devlink instance should represent an ASIC. The following patches are going to move the devlink instance even more down to a bus device, but until then, have one devlink instance per netdevsim instance. Struct nsim_devlink is introduced to hold fib setting. The changes in the fib code are only related to holding the configuration per devlink instance instead of network namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 15:59:42 +02:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Introduce a lock to guard nexthop hashtable Currently netdevsim relies on RTNL to maintain exclusivity in accessing the nexthop hash table. However, bucket notification may be called without RTNL having been held. Instead, introduce a custom lock to guard the table. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:17 +01:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Fix reference count leak on route deletion failure As part of FIB offload simulation, netdevsim stores IPv4 and IPv6 routes and holds a reference on FIB info structures that in turn hold a reference on the associated nexthop device(s). In the unlikely case where we are unable to allocate memory to process a route deletion request, netdevsim will not release the reference from the associated FIB info structure, thereby preventing the associated nexthop device(s) from ever being removed [1]. Fix this by scheduling a work item that will flush netdevsim's FIB table upon route deletion failure. This will cause netdevsim to release its reference from all the FIB info structures in its table. Reported by Lucas Leong of Trend Micro Zero Day Initiative. Fixes: 0ae3eb7b4611 ("netdevsim: fib: Perform the route programming in a non-atomic context") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28 14:45:33 +03:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: implement proper devlink reload During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:36 +02:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: take devlink net instead of init_net Follow-up patch is going to allow to reload devlink instance into different network namespace, so use devlink_net() helper instead of init_net. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:38 +02:00
netdevsim: implement proper devlink reload During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:36 +02:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: Restore per-network namespace accounting for fib entries Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06 12:15:17 -07:00
netdevsim: convert driver to use unlocked devlink API during init/fini Prepare for devlink reload being called with devlink->lock held and convert the netdevsim driver to use unlocked devlink API during init and fini flows. Take devl_lock() in reload_down() and reload_up() ops in the meantime before reload cmd is converted to take the lock itself. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-16 13:02:40 +02:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Fix reference count leak on route deletion failure As part of FIB offload simulation, netdevsim stores IPv4 and IPv6 routes and holds a reference on FIB info structures that in turn hold a reference on the associated nexthop device(s). In the unlikely case where we are unable to allocate memory to process a route deletion request, netdevsim will not release the reference from the associated FIB info structure, thereby preventing the associated nexthop device(s) from ever being removed [1]. Fix this by scheduling a work item that will flush netdevsim's FIB table upon route deletion failure. This will cause netdevsim to release its reference from all the FIB info structures in its table. Reported by Lucas Leong of Trend Micro Zero Day Initiative. Fixes: 0ae3eb7b4611 ("netdevsim: fib: Perform the route programming in a non-atomic context") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28 14:45:33 +03:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: fib: Introduce a lock to guard nexthop hashtable Currently netdevsim relies on RTNL to maintain exclusivity in accessing the nexthop hash table. However, bucket notification may be called without RTNL having been held. Instead, introduce a custom lock to guard the table. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:17 +01:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: convert driver to use unlocked devlink API during init/fini Prepare for devlink reload being called with devlink->lock held and convert the netdevsim driver to use unlocked devlink API during init and fini flows. Take devl_lock() in reload_down() and reload_up() ops in the meantime before reload cmd is converted to take the lock itself. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-16 13:02:40 +02:00
netdevsim: take devlink net instead of init_net Follow-up patch is going to allow to reload devlink instance into different network namespace, so use devlink_net() helper instead of init_net. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:38 +02:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Fix reference count leak on route deletion failure As part of FIB offload simulation, netdevsim stores IPv4 and IPv6 routes and holds a reference on FIB info structures that in turn hold a reference on the associated nexthop device(s). In the unlikely case where we are unable to allocate memory to process a route deletion request, netdevsim will not release the reference from the associated FIB info structure, thereby preventing the associated nexthop device(s) from ever being removed [1]. Fix this by scheduling a work item that will flush netdevsim's FIB table upon route deletion failure. This will cause netdevsim to release its reference from all the FIB info structures in its table. Reported by Lucas Leong of Trend Micro Zero Day Initiative. Fixes: 0ae3eb7b4611 ("netdevsim: fib: Perform the route programming in a non-atomic context") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28 14:45:33 +03:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: Add dummy implementation for nexthop offload Implement dummy nexthop "offload" in the driver by storing currently "programmed" nexthops in a hash table. Each nexthop in the hash table is marked with "trap" indication and increments the nexthops resource occupancy. This will later allow us to test the nexthop offload API on top of netdevsim. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04 15:30:38 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Add dummy implementation for FIB offload Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing currently "programmed" routes in a hash table. Each route in the hash table is marked with "trap" indication. The indication is cleared when the route is replaced or when the netdevsim instance is deleted. This will later allow us to test the route offload API on top of netdevsim. v2: * Convert to new fib_alias_hw_flags_set() interface Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:15 +02:00
netdevsim: fib: Perform the route programming in a non-atomic context Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01 21:47:49 +02:00
netdevsim: fib: Introduce a lock to guard nexthop hashtable Currently netdevsim relies on RTNL to maintain exclusivity in accessing the nexthop hash table. However, bucket notification may be called without RTNL having been held. Instead, introduce a custom lock to guard the table. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12 17:50:17 +01:00
netdevsim: fib: Add debugfs to debug route offload failure Add "fail_route_offload" flag to disallow offloading routes. It is needed to test "offload failed" notifications. Create the flag as part of nsim_fib_create() under fib directory and set it to false by default. When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and "fail_route_offload" value is true, set the appropriate hardware flag to make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 10:22:56 +02:00
netdevsim: change fib accounting and limitations to be per-device Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03 11:49:26 +02:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00