linux

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] kconfig: PRINTK_TIME depends on PRINTK Make PRINTK_TIME depend on PRINTK. Only display/offer it if PRINTK is enabled. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-06 20:36:38 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

Permit silencing of __deprecated warnings. The __deprecated marker is quite useful in highlighting the remnants of old APIs that want removing. However, it is quite normal for one or more years to pass, before the (usually ancient, bitrotten) code in question is either updated or deleted. Thus, like __must_check, add a Kconfig option that permits the silencing of this compiler warning. This change mimics the ifdef-ery and Kconfig defaults of MUST_CHECK as closely as possible. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-25 04:06:13 -04:00

add CONFIG_ENABLE_MUST_CHECK Those 1500 warnings can be a bit of a pain. Add a config option to shut them up. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2006-08-14 22:43:18 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

Add option to enable -Wframe-larger-than= on gcc 4.4 Add option to enable -Wframe-larger-than= on gcc 4.4 gcc mainline (upcoming 4.4) added a new -Wframe-larger-than=... option to warn at build time about too large stack frames. Add a config option to enable this warning, since this very useful for the kernel. I choose (somewhat arbitarily) 2048 as default warning threshold for 64bit and 1024 as default for 32bit architectures. With some research and fixing all the code for smaller values these defaults should be probably lowered. With the default allyesconfigs have some new warnings, but I think that is all code that should be just fixed. At some point (when gcc 4.4 is released and widely used) this should obsolete make checkstack Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-02-22 15:15:03 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] let MAGIC_SYSRQ no longer depend on DEBUG_KERNEL I know several people using MAGIC_SYSRQ not for kernel debugging but for trying to do a halfway normal shutdown in case of problems. Since there's no technical reason why MAGIC_SYSRQ would have to depend on DEBUG_KERNEL, I'm therefore suggesting to drop this dependency. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-01-09 20:54:51 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] Add EXPORT_UNUSED_SYMBOL and EXPORT_UNUSED_SYMBOL_GPL Temporarily add EXPORT_UNUSED_SYMBOL and EXPORT_UNUSED_SYMBOL_GPL. These will be used as a transition measure for symbols that aren't used in the kernel and are on the way out. When a module uses such a symbol, a warning is printk'd at modprobe time. The main reason for removing unused exports is size: eacho export takes roughly between 100 and 150 bytes of kernel space in the binary. This patch gives users the option to immediately get this size gain via a config option. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-06-28 04:26:45 -07:00

[PATCH] Kconfig refactoring for better menu nesting Refactor Kconfig content to maximize nesting of menus by menuconfig and xconfig. Tested by simultaneously running `make xconfig` with and without patch, and comparing displays. Signed-off-by: Don Mullis <dwm@meer.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-10 02:18:37 -08:00

debugfs: Add a reference to the debugfs API documentation. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2008-05-20 00:06:00 +02:00

[PATCH] Kconfig refactoring for better menu nesting Refactor Kconfig content to maximize nesting of menus by menuconfig and xconfig. Tested by simultaneously running `make xconfig` with and without patch, and comparing displays. Signed-off-by: Don Mullis <dwm@meer.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-10 02:18:37 -08:00

kbuild: introduce new option to enhance section mismatch analysis Setting the option DEBUG_SECTION_MISMATCH will report additional section mismatch'es but this should in the end makes it possible to get rid of all of them. See help text in lib/Kconfig.debug for details. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-01-21 21:31:44 +01:00

kbuild: print only total number of section mismatces found We have too many section mismatches detected at the moment. So silence modpost and prevent the option from being set in a typical allyesconfig build. Tell the user how to see all the deteils in the summary message from modpost. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-02-02 18:57:18 +01:00

kbuild: explain why DEBUG_SECTION_MISMATCH is UNDEFINED We started to see patches enabling this - so explain why it is disabled and the condition to enable it again. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-02-15 13:53:11 +01:00

kbuild: introduce new option to enhance section mismatch analysis Setting the option DEBUG_SECTION_MISMATCH will report additional section mismatch'es but this should in the end makes it possible to get rid of all of them. See help text in lib/Kconfig.debug for details. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-01-21 21:31:44 +01:00

kbuild: Spelling/grammar fixes for config DEBUG_SECTION_MISMATCH Including additional fixes from Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-01-30 11:13:23 +01:00

kbuild: introduce new option to enhance section mismatch analysis Setting the option DEBUG_SECTION_MISMATCH will report additional section mismatch'es but this should in the end makes it possible to get rid of all of them. See help text in lib/Kconfig.debug for details. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-01-21 21:31:44 +01:00

kbuild: Spelling/grammar fixes for config DEBUG_SECTION_MISMATCH Including additional fixes from Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-01-30 11:13:23 +01:00

kbuild: introduce new option to enhance section mismatch analysis Setting the option DEBUG_SECTION_MISMATCH will report additional section mismatch'es but this should in the end makes it possible to get rid of all of them. See help text in lib/Kconfig.debug for details. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-01-21 21:31:44 +01:00

kbuild: Spelling/grammar fixes for config DEBUG_SECTION_MISMATCH Including additional fixes from Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-01-30 11:13:23 +01:00

kbuild: introduce new option to enhance section mismatch analysis Setting the option DEBUG_SECTION_MISMATCH will report additional section mismatch'es but this should in the end makes it possible to get rid of all of them. See help text in lib/Kconfig.debug for details. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-01-21 21:31:44 +01:00

kbuild: Spelling/grammar fixes for config DEBUG_SECTION_MISMATCH Including additional fixes from Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-01-30 11:13:23 +01:00

kbuild: introduce new option to enhance section mismatch analysis Setting the option DEBUG_SECTION_MISMATCH will report additional section mismatch'es but this should in the end makes it possible to get rid of all of them. See help text in lib/Kconfig.debug for details. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-01-21 21:31:44 +01:00

kbuild: add verbose option to Section mismatch reporting in modpost If the config option CONFIG_SECTION_MISMATCH is not set and we see a Section mismatch present the following to the user: modpost: Found 1 section mismatch(es). To see additional details select "Enable full Section mismatch analysis" in the Kernel Hacking menu (CONFIG_SECTION_MISMATCH). If the option CONFIG_SECTION_MISMATCH is selected then be verbose in the Section mismatch reporting from mdopost. Sample outputs: WARNING: o-x86_64/vmlinux.o(.text+0x7396): Section mismatch in reference from the function discover_ebda() to the variable .init.data:ebda_addr The function discover_ebda() references the variable __initdata ebda_addr. This is often because discover_ebda lacks a __initdata annotation or the annotation of ebda_addr is wrong. WARNING: o-x86_64/vmlinux.o(.data+0x74d58): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit() The variable pci_serial_quirks references the function __devexit pci_plx9050_exit() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: o-x86_64/vmlinux.o(__ksymtab+0x630): Section mismatch in reference from the variable __ksymtab_arch_register_cpu to the function .cpuinit.text:arch_register_cpu() The symbol arch_register_cpu is exported and annotated __cpuinit Fix this by removing the __cpuinit annotation of arch_register_cpu or drop the export. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-01-24 21:12:37 +01:00

kbuild: introduce new option to enhance section mismatch analysis Setting the option DEBUG_SECTION_MISMATCH will report additional section mismatch'es but this should in the end makes it possible to get rid of all of them. See help text in lib/Kconfig.debug for details. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2008-01-21 21:31:44 +01:00

[PATCH] let MAGIC_SYSRQ no longer depend on DEBUG_KERNEL I know several people using MAGIC_SYSRQ not for kernel debugging but for trying to do a halfway normal shutdown in case of problems. Since there's no technical reason why MAGIC_SYSRQ would have to depend on DEBUG_KERNEL, I'm therefore suggesting to drop this dependency. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-01-09 20:54:51 -08:00

[PATCH] Debug shared irqs Drivers registering IRQ handlers with SA_SHIRQ really ought to be able to handle an interrupt happening before request_irq() returns. They also ought to be able to handle an interrupt happening during the start of their call to free_irq(). Let's test that hypothesis.... [bunk@stusta.de: Kconfig fixes] Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-02-12 00:52:00 -08:00

[PATCH] detect soft lockups This patch adds a new kernel debug feature: CONFIG_DETECT_SOFTLOCKUP. When enabled then per-CPU watchdog threads are started, which try to run once per second. If they get delayed for more than 10 seconds then a callback from the timer interrupt detects this condition and prints out a warning message and a stack dump (once per lockup incident). The feature is otherwise non-intrusive, it doesnt try to unlock the box in any way, it only gets the debug info out, automatically, and on all CPUs affected by the lockup. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-09-06 15:16:27 -07:00

[PATCH] Disable DETECT_SOFTLOCKUP for s390 We got several false bug reports because of enabled CONFIG_DETECT_SOFTLOCKUP. Disable soft lockup detection on s390, since it doesn't work on a virtualized architecture. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-10-11 01:20:44 -07:00

[PATCH] detect soft lockups This patch adds a new kernel debug feature: CONFIG_DETECT_SOFTLOCKUP. When enabled then per-CPU watchdog threads are started, which try to run once per second. If they get delayed for more than 10 seconds then a callback from the timer interrupt detects this condition and prints out a warning message and a stack dump (once per lockup incident). The feature is otherwise non-intrusive, it doesnt try to unlock the box in any way, it only gets the debug info out, automatically, and on all CPUs affected by the lockup. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-09-06 15:16:27 -07:00

softlockup: allow panic on lockup allow users to configure the softlockup detector to generate a panic instead of a warning message. high-availability systems might opt for this strict method (combined with panic_timeout= boot option/sysctl), instead of generating softlockup warnings ad infinitum. also, automated tests work better if the system reboots reliably (into a safe kernel) in case of a lockup. The full spectrum of configurability is supported: boot option, sysctl option and Kconfig option. it's default-disabled. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2008-05-12 21:21:04 +02:00

[PATCH] detect soft lockups This patch adds a new kernel debug feature: CONFIG_DETECT_SOFTLOCKUP. When enabled then per-CPU watchdog threads are started, which try to run once per second. If they get delayed for more than 10 seconds then a callback from the timer interrupt detects this condition and prints out a warning message and a stack dump (once per lockup incident). The feature is otherwise non-intrusive, it doesnt try to unlock the box in any way, it only gets the debug info out, automatically, and on all CPUs affected by the lockup. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-09-06 15:16:27 -07:00

softlockup: allow panic on lockup allow users to configure the softlockup detector to generate a panic instead of a warning message. high-availability systems might opt for this strict method (combined with panic_timeout= boot option/sysctl), instead of generating softlockup warnings ad infinitum. also, automated tests work better if the system reboots reliably (into a safe kernel) in case of a lockup. The full spectrum of configurability is supported: boot option, sysctl option and Kconfig option. it's default-disabled. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2008-05-12 21:21:04 +02:00

sched: scheduler debugging, enable in Kconfig enable CONFIG_SCHED_DEBUG in lib/Kconfig.debug. the runtime overhead of this option is very small. Signed-off-by: Ingo Molnar <mingo@elte.hu>

2007-07-09 18:52:00 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] Add debugging feature /proc/timer_stat Add /proc/timer_stats support: debugging feature to profile timer expiration. Both the starting site, process/PID and the expiration function is captured. This allows the quick identification of timer event sources in a system. Sample output: # echo 1 > /proc/timer_stats # cat /proc/timer_stats Timer Stats Version: v0.1 Sample period: 4.010 s 24, 0 swapper hrtimer_stop_sched_tick (hrtimer_sched_tick) 11, 0 swapper sk_reset_timer (tcp_delack_timer) 6, 0 swapper hrtimer_stop_sched_tick (hrtimer_sched_tick) 2, 1 swapper queue_delayed_work_on (delayed_work_timer_fn) 17, 0 swapper hrtimer_restart_sched_tick (hrtimer_sched_tick) 2, 1 swapper queue_delayed_work_on (delayed_work_timer_fn) 4, 2050 pcscd do_nanosleep (hrtimer_wakeup) 5, 4179 sshd sk_reset_timer (tcp_write_timer) 4, 2248 yum-updatesd schedule_timeout (process_timeout) 18, 0 swapper hrtimer_restart_sched_tick (hrtimer_sched_tick) 3, 0 swapper sk_reset_timer (tcp_delack_timer) 1, 1 swapper neigh_table_init_no_netlink (neigh_periodic_timer) 2, 1 swapper e1000_up (e1000_watchdog) 1, 1 init schedule_timeout (process_timeout) 100 total events, 25.24 events/sec [ cleanups and hrtimers support from Thomas Gleixner <tglx@linutronix.de> ] [bunk@stusta.de: nr_entries can become static] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-02-16 01:28:13 -08:00

timer stats: speedups Make timer-stats have almost zero overhead when enabled in the config but not used. (this way distros can enable it more easily) Also update the documentation about overhead of timer_stats - it was written for the first version which had a global lock and a linear list walk based lookup ;-) Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-06-01 00:47:16 -07:00

[PATCH] Add debugging feature /proc/timer_stat Add /proc/timer_stats support: debugging feature to profile timer expiration. Both the starting site, process/PID and the expiration function is captured. This allows the quick identification of timer event sources in a system. Sample output: # echo 1 > /proc/timer_stats # cat /proc/timer_stats Timer Stats Version: v0.1 Sample period: 4.010 s 24, 0 swapper hrtimer_stop_sched_tick (hrtimer_sched_tick) 11, 0 swapper sk_reset_timer (tcp_delack_timer) 6, 0 swapper hrtimer_stop_sched_tick (hrtimer_sched_tick) 2, 1 swapper queue_delayed_work_on (delayed_work_timer_fn) 17, 0 swapper hrtimer_restart_sched_tick (hrtimer_sched_tick) 2, 1 swapper queue_delayed_work_on (delayed_work_timer_fn) 4, 2050 pcscd do_nanosleep (hrtimer_wakeup) 5, 4179 sshd sk_reset_timer (tcp_write_timer) 4, 2248 yum-updatesd schedule_timeout (process_timeout) 18, 0 swapper hrtimer_restart_sched_tick (hrtimer_sched_tick) 3, 0 swapper sk_reset_timer (tcp_delack_timer) 1, 1 swapper neigh_table_init_no_netlink (neigh_periodic_timer) 2, 1 swapper e1000_up (e1000_watchdog) 1, 1 init schedule_timeout (process_timeout) 100 total events, 25.24 events/sec [ cleanups and hrtimers support from Thomas Gleixner <tglx@linutronix.de> ] [bunk@stusta.de: nr_entries can become static] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-02-16 01:28:13 -08:00

infrastructure to debug (dynamic) objects We can see an ever repeating problem pattern with objects of any kind in the kernel: 1) freeing of active objects 2) reinitialization of active objects Both problems can be hard to debug because the crash happens at a point where we have no chance to decode the root cause anymore. One problem spot are kernel timers, where the detection of the problem often happens in interrupt context and usually causes the machine to panic. While working on a timer related bug report I had to hack specialized code into the timer subsystem to get a reasonable hint for the root cause. This debug hack was fine for temporary use, but far from a mergeable solution due to the intrusiveness into the timer code. The code further lacked the ability to detect and report the root cause instantly and keep the system operational. Keeping the system operational is important to get hold of the debug information without special debugging aids like serial consoles and special knowledge of the bug reporter. The problems described above are not restricted to timers, but timers tend to expose it usually in a full system crash. Other objects are less explosive, but the symptoms caused by such mistakes can be even harder to debug. Instead of creating specialized debugging code for the timer subsystem a generic infrastructure is created which allows developers to verify their code and provides an easy to enable debug facility for users in case of trouble. The debugobjects core code keeps track of operations on static and dynamic objects by inserting them into a hashed list and sanity checking them on object operations and provides additional checks whenever kernel memory is freed. The tracked object operations are: - initializing an object - adding an object to a subsystem list - deleting an object from a subsystem list Each operation is sanity checked before the operation is executed and the subsystem specific code can provide a fixup function which allows to prevent the damage of the operation. When the sanity check triggers a warning message and a stack trace is printed. The list of operations can be extended if the need arises. For now it's limited to the requirements of the first user (timers). The core code enqueues the objects into hash buckets. The hash index is generated from the address of the object to simplify the lookup for the check on kfree/vfree. Each bucket has it's own spinlock to avoid contention on a global lock. The debug code can be compiled in without being active. The runtime overhead is minimal and could be optimized by asm alternatives. A kernel command line option enables the debugging code. Thanks to Ingo Molnar for review, suggestions and cleanup patches. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Greg KH <greg@kroah.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:55:01 -07:00

debugobjects: add timer specific object debugging code Add calls to the generic object debugging infrastructure and provide fixup functions which allow to keep the system alive when recoverable problems have been detected by the object debugging core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Greg KH <greg@kroah.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-30 00:55:03 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] kconfig: clarify memory debug options The Kconfig text for CONFIG_DEBUG_SLAB and CONFIG_DEBUG_PAGEALLOC have always seemed a bit confusing. Change them to: CONFIG_DEBUG_SLAB: "Debug slab memory allocations" CONFIG_DEBUG_PAGEALLOC: "Debug page memory allocations" Cc: "David S. Miller" <davem@davemloft.net> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-03-25 03:07:22 -08:00

[PATCH] DEBUG_SLAB depends on SLAB Make DEBUG_SLAB depend on SLAB. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-01-08 01:01:42 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] slab: implement /proc/slab_allocators Implement /proc/slab_allocators. It produces output like: idr_layer_cache: 80 idr_pre_get+0x33/0x4e buffer_head: 2555 alloc_buffer_head+0x20/0x75 mm_struct: 9 mm_alloc+0x1e/0x42 mm_struct: 20 dup_mm+0x36/0x370 vm_area_struct: 384 dup_mm+0x18f/0x370 vm_area_struct: 151 do_mmap_pgoff+0x2e0/0x7c3 vm_area_struct: 1 split_vma+0x5a/0x10e vm_area_struct: 11 do_brk+0x206/0x2e2 vm_area_struct: 2 copy_vma+0xda/0x142 vm_area_struct: 9 setup_arg_pages+0x99/0x214 fs_cache: 8 copy_fs_struct+0x21/0x133 fs_cache: 29 copy_process+0xf38/0x10e3 files_cache: 30 alloc_files+0x1b/0xcf signal_cache: 81 copy_process+0xbaa/0x10e3 sighand_cache: 77 copy_process+0xe65/0x10e3 sighand_cache: 1 de_thread+0x4d/0x5f8 anon_vma: 241 anon_vma_prepare+0xd9/0xf3 size-2048: 1 add_sect_attrs+0x5f/0x145 size-2048: 2 journal_init_revoke+0x99/0x302 size-2048: 2 journal_init_revoke+0x137/0x302 size-2048: 2 journal_init_inode+0xf9/0x1c4 Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Alexander Nyberg <alexn@telia.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> DESC slab-leaks3-locking-fix EDESC From: Andrew Morton <akpm@osdl.org> Update for slab-remove-cachep-spinlock.patch Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Alexander Nyberg <alexn@telia.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-03-25 03:06:39 -08:00

SLUB: support slub_debug on by default Add a new configuration variable CONFIG_SLUB_DEBUG_ON If set then the kernel will be booted by default with slab debugging switched on. Similar to CONFIG_SLAB_DEBUG. By default slab debugging is available but must be enabled by specifying "slub_debug" as a kernel parameter. Also add support to switch off slab debugging for a kernel that was built with CONFIG_SLUB_DEBUG_ON. This works by specifying slub_debug=- as a kernel parameter. Dave Jones wanted this feature. http://marc.info/?l=linux-kernel&m=118072189913045&w=2 [akpm@linux-foundation.org: clean up switch statement] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-07-15 23:38:14 -07:00

SLUB: Support for performance statistics The statistics provided here allow the monitoring of allocator behavior but at the cost of some (minimal) loss of performance. Counters are placed in SLUB's per cpu data structure. The per cpu structure may be extended by the statistics to grow larger than one cacheline which will increase the cache footprint of SLUB. There is a compile option to enable/disable the inclusion of the runtime statistics and its off by default. The slabinfo tool is enhanced to support these statistics via two options: -D Switches the line of information displayed for a slab from size mode to activity mode. -A Sorts the slabs displayed by activity. This allows the display of the slabs most important to the performance of a certain load. -r Report option will report detailed statistics on Example (tbench load): slabinfo -AD ->Shows the most active slabs Name Objects Alloc Free %Fast skbuff_fclone_cache 33 111953835 111953835 99 99 :0000192 2666 5283688 5281047 99 99 :0001024 849 5247230 5246389 83 83 vm_area_struct 1349 119642 118355 91 22 :0004096 15 66753 66751 98 98 :0000064 2067 25297 23383 98 78 dentry 10259 28635 18464 91 45 :0000080 11004 18950 8089 98 98 :0000096 1703 12358 10784 99 98 :0000128 762 10582 9875 94 18 :0000512 184 9807 9647 95 81 :0002048 479 9669 9195 83 65 anon_vma 777 9461 9002 99 71 kmalloc-8 6492 9981 5624 99 97 :0000768 258 7174 6931 58 15 So the skbuff_fclone_cache is of highest importance for the tbench load. Pretty high load on the 192 sized slab. Look for the aliases slabinfo -a | grep 000192 :0000192 <- xfs_btree_cur filp kmalloc-192 uid_cache tw_sock_TCP request_sock_TCPv6 tw_sock_TCPv6 skbuff_head_cache xfs_ili Likely skbuff_head_cache. Looking into the statistics of the skbuff_fclone_cache is possible through slabinfo skbuff_fclone_cache ->-r option implied if cache name is mentioned .... Usual output ... Slab Perf Counter Alloc Free %Al %Fr -------------------------------------------------- Fastpath 111953360 111946981 99 99 Slowpath 1044 7423 0 0 Page Alloc 272 264 0 0 Add partial 25 325 0 0 Remove partial 86 264 0 0 RemoteObj/SlabFrozen 350 4832 0 0 Total 111954404 111954404 Flushes 49 Refill 0 Deactivate Full=325(92%) Empty=0(0%) ToHead=24(6%) ToTail=1(0%) Looks good because the fastpath is overwhelmingly taken. skbuff_head_cache: Slab Perf Counter Alloc Free %Al %Fr -------------------------------------------------- Fastpath 5297262 5259882 99 99 Slowpath 4477 39586 0 0 Page Alloc 937 824 0 0 Add partial 0 2515 0 0 Remove partial 1691 824 0 0 RemoteObj/SlabFrozen 2621 9684 0 0 Total 5301739 5299468 Deactivate Full=2620(100%) Empty=0(0%) ToHead=0(0%) ToTail=0(0%) Descriptions of the output: Total: The total number of allocation and frees that occurred for a slab Fastpath: The number of allocations/frees that used the fastpath. Slowpath: Other allocations Page Alloc: Number of calls to the page allocator as a result of slowpath processing Add Partial: Number of slabs added to the partial list through free or alloc (occurs during cpuslab flushes) Remove Partial: Number of slabs removed from the partial list as a result of allocations retrieving a partial slab or by a free freeing the last object of a slab. RemoteObj/Froz: How many times were remotely freed object encountered when a slab was about to be deactivated. Frozen: How many times was free able to skip list processing because the slab was in use as the cpuslab of another processor. Flushes: Number of times the cpuslab was flushed on request (kmem_cache_shrink, may result from races in __slab_alloc) Refill: Number of times we were able to refill the cpuslab from remotely freed objects for the same slab. Deactivate: Statistics how slabs were deactivated. Shows how they were put onto the partial list. In general fastpath is very good. Slowpath without partial list processing is also desirable. Any touching of partial list uses node specific locks which may potentially cause list lock contention. Signed-off-by: Christoph Lameter <clameter@sgi.com>

2008-02-07 17:47:41 -08:00

slub: Deal with config variable dependencies count_partial() is used by both slabinfo and the sysfs proc support. Move the function directly before the beginning of the sysfs code so that it can be easily found. Rework the preprocessor conditional to take into account that slub sysfs support depends on CONFIG_SYSFS *and* CONFIG_SLUB_DEBUG. Make CONFIG_SLUB_STATS depend on CONFIG_SLUB_DEBUG and CONFIG_SYSFS. There is no point of keeping statistics if no one can restrive them. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

2008-04-14 18:51:34 +03:00

SLUB: Support for performance statistics The statistics provided here allow the monitoring of allocator behavior but at the cost of some (minimal) loss of performance. Counters are placed in SLUB's per cpu data structure. The per cpu structure may be extended by the statistics to grow larger than one cacheline which will increase the cache footprint of SLUB. There is a compile option to enable/disable the inclusion of the runtime statistics and its off by default. The slabinfo tool is enhanced to support these statistics via two options: -D Switches the line of information displayed for a slab from size mode to activity mode. -A Sorts the slabs displayed by activity. This allows the display of the slabs most important to the performance of a certain load. -r Report option will report detailed statistics on Example (tbench load): slabinfo -AD ->Shows the most active slabs Name Objects Alloc Free %Fast skbuff_fclone_cache 33 111953835 111953835 99 99 :0000192 2666 5283688 5281047 99 99 :0001024 849 5247230 5246389 83 83 vm_area_struct 1349 119642 118355 91 22 :0004096 15 66753 66751 98 98 :0000064 2067 25297 23383 98 78 dentry 10259 28635 18464 91 45 :0000080 11004 18950 8089 98 98 :0000096 1703 12358 10784 99 98 :0000128 762 10582 9875 94 18 :0000512 184 9807 9647 95 81 :0002048 479 9669 9195 83 65 anon_vma 777 9461 9002 99 71 kmalloc-8 6492 9981 5624 99 97 :0000768 258 7174 6931 58 15 So the skbuff_fclone_cache is of highest importance for the tbench load. Pretty high load on the 192 sized slab. Look for the aliases slabinfo -a | grep 000192 :0000192 <- xfs_btree_cur filp kmalloc-192 uid_cache tw_sock_TCP request_sock_TCPv6 tw_sock_TCPv6 skbuff_head_cache xfs_ili Likely skbuff_head_cache. Looking into the statistics of the skbuff_fclone_cache is possible through slabinfo skbuff_fclone_cache ->-r option implied if cache name is mentioned .... Usual output ... Slab Perf Counter Alloc Free %Al %Fr -------------------------------------------------- Fastpath 111953360 111946981 99 99 Slowpath 1044 7423 0 0 Page Alloc 272 264 0 0 Add partial 25 325 0 0 Remove partial 86 264 0 0 RemoteObj/SlabFrozen 350 4832 0 0 Total 111954404 111954404 Flushes 49 Refill 0 Deactivate Full=325(92%) Empty=0(0%) ToHead=24(6%) ToTail=1(0%) Looks good because the fastpath is overwhelmingly taken. skbuff_head_cache: Slab Perf Counter Alloc Free %Al %Fr -------------------------------------------------- Fastpath 5297262 5259882 99 99 Slowpath 4477 39586 0 0 Page Alloc 937 824 0 0 Add partial 0 2515 0 0 Remove partial 1691 824 0 0 RemoteObj/SlabFrozen 2621 9684 0 0 Total 5301739 5299468 Deactivate Full=2620(100%) Empty=0(0%) ToHead=0(0%) ToTail=0(0%) Descriptions of the output: Total: The total number of allocation and frees that occurred for a slab Fastpath: The number of allocations/frees that used the fastpath. Slowpath: Other allocations Page Alloc: Number of calls to the page allocator as a result of slowpath processing Add Partial: Number of slabs added to the partial list through free or alloc (occurs during cpuslab flushes) Remove Partial: Number of slabs removed from the partial list as a result of allocations retrieving a partial slab or by a free freeing the last object of a slab. RemoteObj/Froz: How many times were remotely freed object encountered when a slab was about to be deactivated. Frozen: How many times was free able to skip list processing because the slab was in use as the cpuslab of another processor. Flushes: Number of times the cpuslab was flushed on request (kmem_cache_shrink, may result from races in __slab_alloc) Refill: Number of times we were able to refill the cpuslab from remotely freed objects for the same slab. Deactivate: Statistics how slabs were deactivated. Shows how they were put onto the partial list. In general fastpath is very good. Slowpath without partial list processing is also desirable. Any touching of partial list uses node specific locks which may potentially cause list lock contention. Signed-off-by: Christoph Lameter <clameter@sgi.com>

2008-02-07 17:47:41 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[POWERPC] ppc64: support CONFIG_DEBUG_PREEMPT Add CONFIG_DEBUG_PREEMPT support to ppc64: it was useful for testing get_paca() preemption. Cheat a little, just use debug_smp_processor_id() in the debug version of get_paca(): it contains all the right checks and reporting, though get_paca() doesn't really use smp_processor_id(). Use local_paca for what might have been called __raw_get_paca(). Silence harmless warnings from io.h and lparcfg.c with local_paca - it is okay for iseries_lparcfg_data to be referencing shared_proc with preemption enabled: all cpus should show the same value for shared_proc. Why do other architectures need TRACE_IRQFLAGS_SUPPORT for DEBUG_PREEMPT? I don't know, ppc64 appears to get along fine without it. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Paul Mackerras <paulus@samba.org>

2006-11-01 05:44:54 +11:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] pi-futex: rt mutex debug Runtime debugging functionality for rt-mutexes. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-06-27 02:54:55 -07:00

[PATCH] pi-futex: rt mutex tester RT-mutex tester: scriptable tester for rt mutexes, which allows userspace scripting of mutex unit-tests (and dynamic tests as well), using the actual rt-mutex implementation of the kernel. [akpm@osdl.org: fixlet] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-06-27 02:54:56 -07:00

[PATCH] fix rt-mutex defaults and dependencies Fix defaults and dependencies. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-06-27 02:55:00 -07:00

[PATCH] pi-futex: rt mutex tester RT-mutex tester: scriptable tester for rt mutexes, which allows userspace scripting of mutex unit-tests (and dynamic tests as well), using the actual rt-mutex implementation of the kernel. [akpm@osdl.org: fixlet] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-06-27 02:54:56 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] lockdep: kconfig Offer the following lock validation options: CONFIG_PROVE_LOCKING Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-03 00:24:55 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] lockdep: kconfig Offer the following lock validation options: CONFIG_PROVE_LOCKING Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-03 00:24:55 -07:00

[PATCH] let the the lockdep options depend on DEBUG_KERNEL The lockdep options should depend on DEBUG_KERNEL since: - they are kernel debugging options and - they do otherwise break the DEBUG_KERNEL menu structure Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-14 00:24:32 -07:00

[PATCH] lockdep: kconfig Offer the following lock validation options: CONFIG_PROVE_LOCKING Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-03 00:24:55 -07:00

[PATCH] let the the lockdep options depend on DEBUG_KERNEL The lockdep options should depend on DEBUG_KERNEL since: - they are kernel debugging options and - they do otherwise break the DEBUG_KERNEL menu structure Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-14 00:24:32 -07:00

[PATCH] lockdep: kconfig Offer the following lock validation options: CONFIG_PROVE_LOCKING Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-03 00:24:55 -07:00

[PATCH] let the the lockdep options depend on DEBUG_KERNEL The lockdep options should depend on DEBUG_KERNEL since: - they are kernel debugging options and - they do otherwise break the DEBUG_KERNEL menu structure Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-14 00:24:32 -07:00

[PATCH] lockdep: kconfig Offer the following lock validation options: CONFIG_PROVE_LOCKING Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-03 00:24:55 -07:00

powerpc: Work around gcc's -fno-omit-frame-pointer bug This bug is causing random crashes (http://bugzilla.kernel.org/show_bug.cgi?id=11414). -fno-omit-frame-pointer is only needed on powerpc when -pg is also supplied, and there is a gcc bug that causes incorrect code generation on 32-bit powerpc when -fno-omit-frame-pointer is used---it uses stack locations below the stack pointer, which is not allowed by the ABI because those locations can and sometimes do get corrupted by an interrupt. This ensures that CONFIG_FRAME_POINTER is only selected by ftrace. When CONFIG_FTRACE is enabled we also pass -mno-sched-epilog to work around the gcc codegen bug. Patch based on work by: Andreas Schwab <schwab@suse.de> Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>

2008-09-02 16:50:38 +10:00

[PATCH] lockdep: kconfig Offer the following lock validation options: CONFIG_PROVE_LOCKING Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-03 00:24:55 -07:00

lockstat: core infrastructure Introduce the core lock statistics code. Lock statistics provides lock wait-time and hold-time (as well as the count of corresponding contention and acquisitions events). Also, the first few call-sites that encounter contention are tracked. Lock wait-time is the time spent waiting on the lock. This provides insight into the locking scheme, that is, a heavily contended lock is indicative of a too coarse locking scheme. Lock hold-time is the duration the lock was held, this provides a reference for the wait-time numbers, so they can be put into perspective. 1) lock 2) ... do stuff .. unlock 3) The time between 1 and 2 is the wait-time. The time between 2 and 3 is the hold-time. The lockdep held-lock tracking code is reused, because it already collects locks into meaningful groups (classes), and because it is an existing infrastructure for lock instrumentation. Currently lockdep tracks lock acquisition with two hooks: lock() lock_acquire() _lock() ... code protected by lock ... unlock() lock_release() _unlock() We need to extend this with two more hooks, in order to measure contention. lock_contended() - used to measure contention events lock_acquired() - completion of the contention These are then placed the following way: lock() lock_acquire() if (!_try_lock()) lock_contended() _lock() lock_acquired() ... do locked stuff ... unlock() lock_release() _unlock() (Note: the try_lock() 'trick' is used to avoid instrumenting all platform dependent lock primitive implementations.) It is also possible to toggle the two lockdep features at runtime using: /proc/sys/kernel/prove_locking /proc/sys/kernel/lock_stat (esp. turning off the O(n^2) prove_locking functionaliy can help) [akpm@linux-foundation.org: build fixes] [akpm@linux-foundation.org: nuke unneeded ifdefs] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-07-19 01:48:56 -07:00

typo fix Kernel config option Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-09-24 21:24:43 -07:00

lockstat: core infrastructure Introduce the core lock statistics code. Lock statistics provides lock wait-time and hold-time (as well as the count of corresponding contention and acquisitions events). Also, the first few call-sites that encounter contention are tracked. Lock wait-time is the time spent waiting on the lock. This provides insight into the locking scheme, that is, a heavily contended lock is indicative of a too coarse locking scheme. Lock hold-time is the duration the lock was held, this provides a reference for the wait-time numbers, so they can be put into perspective. 1) lock 2) ... do stuff .. unlock 3) The time between 1 and 2 is the wait-time. The time between 2 and 3 is the hold-time. The lockdep held-lock tracking code is reused, because it already collects locks into meaningful groups (classes), and because it is an existing infrastructure for lock instrumentation. Currently lockdep tracks lock acquisition with two hooks: lock() lock_acquire() _lock() ... code protected by lock ... unlock() lock_release() _unlock() We need to extend this with two more hooks, in order to measure contention. lock_contended() - used to measure contention events lock_acquired() - completion of the contention These are then placed the following way: lock() lock_acquire() if (!_try_lock()) lock_contended() _lock() lock_acquired() ... do locked stuff ... unlock() lock_release() _unlock() (Note: the try_lock() 'trick' is used to avoid instrumenting all platform dependent lock primitive implementations.) It is also possible to toggle the two lockdep features at runtime using: /proc/sys/kernel/prove_locking /proc/sys/kernel/lock_stat (esp. turning off the O(n^2) prove_locking functionaliy can help) [akpm@linux-foundation.org: build fixes] [akpm@linux-foundation.org: nuke unneeded ifdefs] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-07-19 01:48:56 -07:00

lockstat: documentation Provide some documentation for CONFIG_LOCK_STAT. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-07 00:24:33 -07:00

[PATCH] lockdep: kconfig Offer the following lock validation options: CONFIG_PROVE_LOCKING Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-03 00:24:55 -07:00

[PATCH] let the the lockdep options depend on DEBUG_KERNEL The lockdep options should depend on DEBUG_KERNEL since: - they are kernel debugging options and - they do otherwise break the DEBUG_KERNEL menu structure Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-14 00:24:32 -07:00

[PATCH] lockdep: kconfig Offer the following lock validation options: CONFIG_PROVE_LOCKING Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-03 00:24:55 -07:00

[PATCH] let the the lockdep options depend on DEBUG_KERNEL The lockdep options should depend on DEBUG_KERNEL since: - they are kernel debugging options and - they do otherwise break the DEBUG_KERNEL menu structure Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-14 00:24:32 -07:00

[PATCH] lockdep: kconfig Offer the following lock validation options: CONFIG_PROVE_LOCKING Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-03 00:24:55 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] lockdep: kconfig Offer the following lock validation options: CONFIG_PROVE_LOCKING Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-03 00:24:55 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

2006-07-03 00:24:48 -07:00

[PATCH] lockdep: stacktrace subsystem, core Framework to generate and save stacktraces quickly, without printing anything to the console. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-03 00:24:38 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] remove all kernel BUGs This patch eliminates all kernel BUGs, trims about 35k off the typical kernel, and makes the system slightly faster. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-05-01 08:59:01 -07:00

mn10300: add the MN10300/AM33 architecture to the kernel Add architecture support for the MN10300/AM33 CPUs produced by MEI to the kernel. This patch also adds board support for the ASB2303 with the ASB2308 daughter board, and the ASB2305. The only processor supported is the MN103E010, which is an AM33v2 core plus on-chip devices. [akpm@linux-foundation.org: nuke cvs control strings] Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com> Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-02-08 04:19:31 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

kconfig.debug: clarify CONFIG_DEBUG_INFO help text The following patch adds some extra clarification to the CONFIG_DEBUG_INFO Kconfig help text. The current text is mostly a recursive definition and doesn't really say much of anything. When I first read this I thought it was going to enable extra verbosity in debug messages or something, but it is only enabling the "gcc -g" compile option in the Makefile. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

2007-03-27 15:21:33 -06:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] RCU torture-testing kernel module This patch is a rewrite of the one submitted on October 1st, using modules (http://marc.theaimsgroup.com/?l=linux-kernel&m=112819093522998&w=2). This rewrite adds a tristate CONFIG_RCU_TORTURE_TEST, which enables an intense torture test of the RCU infratructure. This is needed due to the continued changes to the RCU infrastructure to accommodate dynamic ticks, CPU hotplug, realtime, and so on. Most of the code is in a separate file that is compiled only if the CONFIG variable is set. Documentation on how to run the test and interpret the output is also included. This code has been tested on i386 and ppc64, and an earlier version of the code has received extensive testing on a number of architectures as part of the PREEMPT_RT patchset. Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-10-30 15:03:12 -08:00

[PATCH] mm: remove bad_range bad_range is supposed to be a temporary check. It would be a pity to throw it out. Make it depend on CONFIG_DEBUG_VM instead. CONFIG_HOLES_IN_ZONE systems were relying on this to check pfn_valid in the page allocator. Add that to page_is_buddy instead. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-01-06 00:10:58 -08:00

[PATCH] RCU torture-testing kernel module This patch is a rewrite of the one submitted on October 1st, using modules (http://marc.theaimsgroup.com/?l=linux-kernel&m=112819093522998&w=2). This rewrite adds a tristate CONFIG_RCU_TORTURE_TEST, which enables an intense torture test of the RCU infratructure. This is needed due to the continued changes to the RCU infrastructure to accommodate dynamic ticks, CPU hotplug, realtime, and so on. Most of the code is in a separate file that is compiled only if the CONFIG variable is set. Documentation on how to run the test and interpret the output is also included. This code has been tested on i386 and ppc64, and an earlier version of the code has received extensive testing on a number of architectures as part of the PREEMPT_RT patchset. Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-10-30 15:03:12 -08:00

MM: virtual address debug Add some (configurable) expensive sanity checking to catch wrong address translations on x86. - create linux/mmdebug.h file to be able include this file in asm headers to not get unsolvable loops in header files - __phys_addr on x86_32 became a function in ioremap.c since PAGE_OFFSET, is_vmalloc_addr and VMALLOC_* non-constasts are undefined if declared in page_32.h - add __phys_addr_const for initializing doublefault_tss.__cr3 Tested on 386, 386pae, x86_64 and x86_64 numa=fake=2. Contains Andi's enable numa virtual address debug patch. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-06-12 13:56:40 +02:00

[PATCH] r/o bind mounts: debugging for missed calls There have been a few oopses caused by 'struct file's with NULL f_vfsmnts. There was also a set of potentially missed mnt_want_write()s from dentry_open() calls. This patch provides a very simple debugging framework to catch these kinds of bugs. It will WARN_ON() them, but should stop us from having any oopses or mnt_writer count imbalances. I'm quite convinced that this is a good thing because it found bugs in the stuff I was working on as soon as I wrote it. [hch: made it conditional on a debug option. But it's still a little bit too ugly] [hch: merged forced remount r/o fix from Dave and akpm's fix for the fix] Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

2008-02-15 14:38:01 -08:00

mm: add a basic debugging framework for memory initialisation Boot initialisation is very complex, with significant numbers of architecture-specific routines, hooks and code ordering. While significant amounts of the initialisation is architecture-independent, it trusts the data received from the architecture layer. This is a mistake, and has resulted in a number of difficult-to-diagnose bugs. This patchset adds some validation and tracing to memory initialisation. It also introduces a few basic defensive measures. The validation code can be explicitly disabled for embedded systems. This patch: Add additional debugging and verification code for memory initialisation. Once enabled, the verification checks are always run and when required additional debugging information may be outputted via a mminit_loglevel= command-line parameter. The verification code is placed in a new file mm/mm_init.c. Ideally other mm initialisation code will be moved here over time. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-07-23 21:26:49 -07:00

[PATCH] Debug variants of linked list macros Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-09-29 01:59:00 -07:00

Add CONFIG_DEBUG_SG sg validation Add a Kconfig entry which will toggle some sanity checks on the sg entry and tables. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2007-10-22 20:01:06 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

mn10300: add the MN10300/AM33 architecture to the kernel Add architecture support for the MN10300/AM33 CPUs produced by MEI to the kernel. This patch also adds board support for the ASB2303 with the ASB2308 daughter board, and the ASB2305. The only processor supported is the MN103E010, which is an AM33v2 core plus on-chip devices. [akpm@linux-foundation.org: nuke cvs control strings] Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com> Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-02-08 04:19:31 -08:00

[PATCH] uml: split CONFIG_FRAME_POINTER from DEBUG_INFO Until now, FRAME_POINTER was set = DEBUG_INFO for UML. Change it to be the default way, so that it can be enabled alone (for instance to get better backtraces on crashes). The call-trace dumper which uses the frame pointer is not yet in, I'm going to introduce it in a separate patch. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-05-28 15:51:59 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] Kconfig help text correction for CONFIG_FRAME_POINTER Fix-up the CONFIG_FRAME_POINTER help text language a bit. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-10-30 15:02:51 -08:00

[PATCH] x86-64: Allow frame pointer and fix help text. Allow frame pointer and fix help text. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-09-12 18:49:25 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

slow down printk during boot Optionally add a boot delay after each kernel printk() call, crudely measured in milliseconds, with a maximum delay of 10 seconds per printk. Enable CONFIG_BOOT_PRINTK_DELAY=y and then add (e.g.): "lpj=loops_per_jiffy boot_delay=100" to the kernel command line. It has been useful in cases like "during boot, my machine just reboots or the screen goes black" by slowing down printk, (and adding initcall_debug), we can usually see the last thing that happened before the lights went out which is usually a valuable clue. [akpm@linux-foundation.org: not all architectures implement CONFIG_HZ] [akpm@linux-foundation.org: fix lots of stuff] [bunk@stusta.de: kernel/printk.c: make 2 variables static] [heiko.carstens@de.ibm.com: fix slow down printk on boot compile error] Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 01:23:46 -07:00

[PATCH] RCU torture-testing kernel module This patch is a rewrite of the one submitted on October 1st, using modules (http://marc.theaimsgroup.com/?l=linux-kernel&m=112819093522998&w=2). This rewrite adds a tristate CONFIG_RCU_TORTURE_TEST, which enables an intense torture test of the RCU infratructure. This is needed due to the continued changes to the RCU infrastructure to accommodate dynamic ticks, CPU hotplug, realtime, and so on. Most of the code is in a separate file that is compiled only if the CONFIG variable is set. Documentation on how to run the test and interpret the output is also included. This code has been tested on i386 and ppc64, and an earlier version of the code has received extensive testing on a number of architectures as part of the PREEMPT_RT patchset. Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-10-30 15:03:12 -08:00

rcu: make rcutorture more vicious: reinstate boot-time testing This patch re-institutes the ability to build rcutorture directly into the Linux kernel. The reason that this capability was removed was that this could result in your kernel being pretty much useless, as rcutorture would be running starting from early boot. This problem has been avoided by (1) making rcutorture run only three seconds of every six by default, (2) adding a CONFIG_RCU_TORTURE_TEST_RUNNABLE that permits rcutorture to be quiesced at boot time, and (3) adding a sysctl in /proc named /proc/sys/kernel/rcutorture_runnable that permits rcutorture to be quiesced and unquiesced when built into the kernel. Please note that this /proc file is -not- available when rcutorture is built as a module. Please also note that to get the earlier take-no-prisoners behavior, you must use the boot command line to set rcutorture's "stutter" parameter to zero. The rcutorture quiescing mechanism is currently quite crude: loops in each rcutorture process that poll a global variable once per tick. Suggestions for improvement are welcome. The default action will be to reduce the polling rate to a few times per second. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Suggested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-06-18 09:26:49 -07:00

[PATCH] RCU torture-testing kernel module This patch is a rewrite of the one submitted on October 1st, using modules (http://marc.theaimsgroup.com/?l=linux-kernel&m=112819093522998&w=2). This rewrite adds a tristate CONFIG_RCU_TORTURE_TEST, which enables an intense torture test of the RCU infratructure. This is needed due to the continued changes to the RCU infrastructure to accommodate dynamic ticks, CPU hotplug, realtime, and so on. Most of the code is in a separate file that is compiled only if the CONFIG variable is set. Documentation on how to run the test and interpret the output is also included. This code has been tested on i386 and ppc64, and an earlier version of the code has received extensive testing on a number of architectures as part of the PREEMPT_RT patchset. Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-10-30 15:03:12 -08:00

[PATCH] Linux Kernel Dump Test Module A simple module to test Linux Kernel Dump mechanism. This module uses jprobes to install/activate pre-defined crash points. At different crash points, various types of crashing scenarios are created like a BUG(), panic(), exception, recursive loop and stack overflow. The user can activate a crash point with specific type by providing parameters at the time of module insertion. Please see the file header for usage information. The module is based on the Linux Kernel Dump Test Tool by Fernando <http://lkdtt.sourceforge.net>. This module could be merged with mainline. Jprobes is used here so that the context in which crash point is hit, could be maintained. This implements all the crash points as done by LKDTT except the one in the middle of tasklet_action(). Signed-off-by: Ankita Garg <ankita@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-10-02 02:17:36 -07:00

rcu: make rcutorture more vicious: reinstate boot-time testing This patch re-institutes the ability to build rcutorture directly into the Linux kernel. The reason that this capability was removed was that this could result in your kernel being pretty much useless, as rcutorture would be running starting from early boot. This problem has been avoided by (1) making rcutorture run only three seconds of every six by default, (2) adding a CONFIG_RCU_TORTURE_TEST_RUNNABLE that permits rcutorture to be quiesced at boot time, and (3) adding a sysctl in /proc named /proc/sys/kernel/rcutorture_runnable that permits rcutorture to be quiesced and unquiesced when built into the kernel. Please note that this /proc file is -not- available when rcutorture is built as a module. Please also note that to get the earlier take-no-prisoners behavior, you must use the boot command line to set rcutorture's "stutter" parameter to zero. The rcutorture quiescing mechanism is currently quite crude: loops in each rcutorture process that poll a global variable once per tick. Suggestions for improvement are welcome. The default action will be to reduce the polling rate to a few times per second. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Suggested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-06-18 09:26:49 -07:00

rcu: RCU-based detection of stalled CPUs for Classic RCU This patch adds stalled-CPU detection to Classic RCU. This capability is enabled by a new config variable CONFIG_RCU_CPU_STALL_DETECTOR, which defaults disabled. This is a debugging feature to detect infinite loops in kernel code, not something that non-kernel-hackers would be expected to care about. This feature can detect looping CPUs in !PREEMPT builds and looping CPUs with preemption disabled in PREEMPT builds. This is essentially a port of this functionality from the treercu patch, replacing the stall debug patch that is already in tip/core/rcu (commit 67182ae1c4). The changes from the patch in tip/core/rcu include making the config variable name match that in treercu, changing from seconds to jiffies to avoid spurious warnings, and printing a boot message when this feature is enabled. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-10-02 16:06:39 -07:00

rcu, debug: detect stalled grace periods this is a diagnostic patch for Classic RCU. The approach is to record a timestamp at the beginning of the grace period (in rcu_start_batch()), then have rcu_check_callbacks() complain if: 1. it is running on a CPU that has holding up grace periods for a long time (say one second). This will identify the culprit assuming that the culprit has not disabled hardware irqs, instruction execution, or some such. 2. it is running on a CPU that is not holding up grace periods, but grace periods have been held up for an even longer time (say two seconds). It is enabled via the default-off CONFIG_DEBUG_RCU_STALL kernel parameter. Rather than exponential backoff, it backs off to once per 30 seconds. My feeling upon thinking on it was that if you have stalled RCU grace periods for that long, a few extra printk() messages are probably the least of your worries... Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: David Witbrodt <dawitbro@sbcglobal.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-08-10 18:35:38 -07:00

x86: kprobes: add kprobes smoke tests that run on boot Here is a quick and naive smoke test for kprobes. This is intended to just verify if some unrelated change broke the *probes subsystem. It is self contained, architecture agnostic and isn't of any great use by itself. This needs to be built in the kernel and runs a basic set of tests to verify if kprobes, jprobes and kretprobes run fine on the kernel. In case of an error, it'll print out a message with a "BUG" prefix. This is a start; we intend to add more tests to this bucket over time. Thanks to Jim Keniston and Masami Hiramatsu for comments and suggestions. Tested on x86 (32/64) and powerpc. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-01-30 13:32:53 +01:00

x86: add a simple backtrace test module During the work on the x86 32 and 64 bit backtrace code I found it useful to have a simple test module to test a process and irq context backtrace. Since the existing backtrace code was buggy, I figure it might be useful to have such a test module in the kernel so that maybe we can even detect such bugs earlier.. [ mingo@elte.hu: build fix ] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2008-01-30 13:33:08 +01:00

stacktrace: add saved stack traces to backtrace self-test This patch adds saved stack-traces to the backtrace suite of self-tests. Note that we don't depend on or unconditionally enable CONFIG_STACKTRACE because not all architectures may have it (and we still want to enable the other tests for those architectures). Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-06-27 18:04:48 +02:00

x86: add a simple backtrace test module During the work on the x86 32 and 64 bit backtrace code I found it useful to have a simple test module to test a process and irq context backtrace. Since the existing backtrace code was buggy, I figure it might be useful to have such a test module in the kernel so that maybe we can even detect such bugs earlier.. [ mingo@elte.hu: build fix ] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2008-01-30 13:33:08 +01:00

block: implement CONFIG_DEBUG_BLOCK_EXT_DEVT Extended devt introduces non-contiguos device numbers. This patch implements a debug option which forces most devt allocations to be from the extended area and spreads them out. This is enabled by default if DEBUG_KERNEL is set and achieves... 1. Detects code paths in kernel or userland which expect predetermined consecutive device numbers. 2. When something goes wrong, avoid corruption as adding to the minor of earlier partition won't lead to the wrong but valid device. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2008-08-25 19:47:25 +09:00

Change default value of CONFIG_DEBUG_BLOCK_EXT_DEVT to 'n' It's a debug option that you would explicitly enable to test this feature, we should default it to 'n' to prevent accidental surprises for now. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2008-08-29 09:06:29 +02:00

block: implement CONFIG_DEBUG_BLOCK_EXT_DEVT Extended devt introduces non-contiguos device numbers. This patch implements a debug option which forces most devt allocations to be from the extended area and spreads them out. This is enabled by default if DEBUG_KERNEL is set and achieves... 1. Detects code paths in kernel or userland which expect predetermined consecutive device numbers. 2. When something goes wrong, avoid corruption as adding to the minor of earlier partition won't lead to the wrong but valid device. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2008-08-25 19:47:25 +09:00

block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT CONFIG_DEBUG_BLOCK_EXT_DEVT can break booting even on some modern distros. Add BIG FAT WARNING to keep people at a safe distance. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2008-10-13 10:46:01 +02:00

block: implement CONFIG_DEBUG_BLOCK_EXT_DEVT Extended devt introduces non-contiguos device numbers. This patch implements a debug option which forces most devt allocations to be from the extended area and spreads them out. This is enabled by default if DEBUG_KERNEL is set and achieves... 1. Detects code paths in kernel or userland which expect predetermined consecutive device numbers. 2. When something goes wrong, avoid corruption as adding to the minor of earlier partition won't lead to the wrong but valid device. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2008-08-25 19:47:25 +09:00

init: DEBUG_BLOCK_EXT_DEVT requires explicit root= param DEBUG_BLOCK_EXT_DEVT shuffles SCSI and IDE device numbers and root device number set using rdev become meaningless. Root devices should be explicitly specified using textual names. Warn about it if root can't be found and DEBUG_BLOCK_EXT_DEVT is enabled. Also, add warning to the help text. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2008-09-01 13:44:35 +02:00

block: implement CONFIG_DEBUG_BLOCK_EXT_DEVT Extended devt introduces non-contiguos device numbers. This patch implements a debug option which forces most devt allocations to be from the extended area and spreads them out. This is enabled by default if DEBUG_KERNEL is set and achieves... 1. Detects code paths in kernel or userland which expect predetermined consecutive device numbers. 2. When something goes wrong, avoid corruption as adding to the minor of earlier partition won't lead to the wrong but valid device. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2008-08-25 19:47:25 +09:00

[PATCH] Linux Kernel Dump Test Module A simple module to test Linux Kernel Dump mechanism. This module uses jprobes to install/activate pre-defined crash points. At different crash points, various types of crashing scenarios are created like a BUG(), panic(), exception, recursive loop and stack overflow. The user can activate a crash point with specific type by providing parameters at the time of module insertion. Please see the file header for usage information. The module is based on the Linux Kernel Dump Test Tool by Fernando <http://lkdtt.sourceforge.net>. This module could be merged with mainline. Jprobes is used here so that the context in which crash point is hit, could be maintained. This implements all the crash points as done by LKDTT except the one in the middle of tasklet_action(). Signed-off-by: Ankita Garg <ankita@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-10-02 02:17:36 -07:00

[PATCH] Kconfig refactoring for better menu nesting Refactor Kconfig content to maximize nesting of menus by menuconfig and xconfig. Tested by simultaneously running `make xconfig` with and without patch, and comparing displays. Signed-off-by: Don Mullis <dwm@meer.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-10 02:18:37 -08:00

[PATCH] Linux Kernel Dump Test Module A simple module to test Linux Kernel Dump mechanism. This module uses jprobes to install/activate pre-defined crash points. At different crash points, various types of crashing scenarios are created like a BUG(), panic(), exception, recursive loop and stack overflow. The user can activate a crash point with specific type by providing parameters at the time of module insertion. Please see the file header for usage information. The module is based on the Linux Kernel Dump Test Tool by Fernando <http://lkdtt.sourceforge.net>. This module could be merged with mainline. Jprobes is used here so that the context in which crash point is hit, could be maintained. This implements all the crash points as done by LKDTT except the one in the middle of tasklet_action(). Signed-off-by: Ankita Garg <ankita@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-10-02 02:17:36 -07:00

make LKDTM depend on BLOCK Make LKDTM depend on BLOCK to prevent build failures with certain configs. Signed-off-by: Chris Snook <csnook@redhat.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-02-23 15:23:26 -08:00

[PATCH] Linux Kernel Dump Test Module A simple module to test Linux Kernel Dump mechanism. This module uses jprobes to install/activate pre-defined crash points. At different crash points, various types of crashing scenarios are created like a BUG(), panic(), exception, recursive loop and stack overflow. The user can activate a crash point with specific type by providing parameters at the time of module insertion. Please see the file header for usage information. The module is based on the Linux Kernel Dump Test Tool by Fernando <http://lkdtt.sourceforge.net>. This module could be merged with mainline. Jprobes is used here so that the context in which crash point is hit, could be maintained. This implements all the crash points as done by LKDTT except the one in the middle of tasklet_action(). Signed-off-by: Ankita Garg <ankita@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-10-02 02:17:36 -07:00

[PATCH] fault-injection capabilities infrastructure This patch provides base functions implement to fault-injection capabilities. - The function should_fail() is taken from failmalloc-1.0 (http://www.nongnu.org/failmalloc/) [akpm@osdl.org: cleanups, comments, add __init] Cc: <okuji@enbug.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Don Mullis <dwm@meer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:43 -08:00

[PATCH] fault-injection Kconfig cleanup - Fix some spelling and grammatical errors - Make the Kconfig menu more conventional. First you select fault-injection, then under that you select particular clients of it. Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Don Mullis <dwm@meer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:49 -08:00

[PATCH] fault injection: stacktrace filtering This patch provides stacktrace filtering feature. The stacktrace filter allows failing only for the caller you are interested in. For example someone may want to inject kmalloc() failures into only e100 module. they want to inject not only direct kmalloc() call, but also indirect allocation, too. - e100_poll --> netif_receive_skb --> packet_rcv_spkt --> skb_clone --> kmem_cache_alloc This patch enables to detect function calls like this by stacktrace and inject failures. The script Documentaion/fault-injection/failmodule.sh helps it. The range of text section of loaded e100 is expected to be [/sys/module/e100/sections/.text, /sys/module/e100/sections/.exit.text) So failmodule.sh stores these values into /debug/failslab/address-start and /debug/failslab/address-end. The maximum stacktrace depth is specified by /debug/failslab/stacktrace-depth. Please see the example that demonstrates how to inject slab allocation failures only for a specific module in Documentation/fault-injection/fault-injection.txt [dwm@meer.net: reject failure if any caller lies within specified range] Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Don Mullis <dwm@meer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:48 -08:00

[PATCH] fault-injection capabilities infrastructure This patch provides base functions implement to fault-injection capabilities. - The function should_fail() is taken from failmalloc-1.0 (http://www.nongnu.org/failmalloc/) [akpm@osdl.org: cleanups, comments, add __init] Cc: <okuji@enbug.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Don Mullis <dwm@meer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:43 -08:00

[PATCH] fault-injection capability for kmalloc This patch provides fault-injection capability for kmalloc. Boot option: failslab=<interval>,<probability>,<space>,<times> <interval> -- specifies the interval of failures. <probability> -- specifies how often it should fail in percent. <space> -- specifies the size of free space where memory can be allocated safely in bytes. <times> -- specifies how many times failures may happen at most. Debugfs: /debug/failslab/interval /debug/failslab/probability /debug/failslab/specifies /debug/failslab/times /debug/failslab/ignore-gfp-highmem /debug/failslab/ignore-gfp-wait Example: failslab=10,100,0,-1 slab allocation (kmalloc(), kmem_cache_alloc(),..) fails once per 10 times. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:44 -08:00

[PATCH] fault-injection Kconfig cleanup - Fix some spelling and grammatical errors - Make the Kconfig menu more conventional. First you select fault-injection, then under that you select particular clients of it. Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Don Mullis <dwm@meer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:49 -08:00

[PATCH] fault-injection capability for kmalloc This patch provides fault-injection capability for kmalloc. Boot option: failslab=<interval>,<probability>,<space>,<times> <interval> -- specifies the interval of failures. <probability> -- specifies how often it should fail in percent. <space> -- specifies the size of free space where memory can be allocated safely in bytes. <times> -- specifies how many times failures may happen at most. Debugfs: /debug/failslab/interval /debug/failslab/probability /debug/failslab/specifies /debug/failslab/times /debug/failslab/ignore-gfp-highmem /debug/failslab/ignore-gfp-wait Example: failslab=10,100,0,-1 slab allocation (kmalloc(), kmem_cache_alloc(),..) fails once per 10 times. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:44 -08:00

[PATCH] fault-injection Kconfig cleanup - Fix some spelling and grammatical errors - Make the Kconfig menu more conventional. First you select fault-injection, then under that you select particular clients of it. Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Don Mullis <dwm@meer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:49 -08:00

[PATCH] fault-injection capability for kmalloc This patch provides fault-injection capability for kmalloc. Boot option: failslab=<interval>,<probability>,<space>,<times> <interval> -- specifies the interval of failures. <probability> -- specifies how often it should fail in percent. <space> -- specifies the size of free space where memory can be allocated safely in bytes. <times> -- specifies how many times failures may happen at most. Debugfs: /debug/failslab/interval /debug/failslab/probability /debug/failslab/specifies /debug/failslab/times /debug/failslab/ignore-gfp-highmem /debug/failslab/ignore-gfp-wait Example: failslab=10,100,0,-1 slab allocation (kmalloc(), kmem_cache_alloc(),..) fails once per 10 times. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:44 -08:00

[PATCH] fault-injection capability for alloc_pages() This patch provides fault-injection capability for alloc_pages() Boot option: fail_page_alloc=<interval>,<probability>,<space>,<times> <interval> -- specifies the interval of failures. <probability> -- specifies how often it should fail in percent. <space> -- specifies the size of free space where memory can be allocated safely in pages. <times> -- specifies how many times failures may happen at most. Debugfs: /debug/fail_page_alloc/interval /debug/fail_page_alloc/probability /debug/fail_page_alloc/specifies /debug/fail_page_alloc/times /debug/fail_page_alloc/ignore-gfp-highmem /debug/fail_page_alloc/ignore-gfp-wait Example: fail_page_alloc=10,100,0,-1 The page allocation (alloc_pages(), ...) fails once per 10 times. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:45 -08:00

[PATCH] fault-injection Kconfig cleanup - Fix some spelling and grammatical errors - Make the Kconfig menu more conventional. First you select fault-injection, then under that you select particular clients of it. Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Don Mullis <dwm@meer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:49 -08:00

[PATCH] fault-injection capability for alloc_pages() This patch provides fault-injection capability for alloc_pages() Boot option: fail_page_alloc=<interval>,<probability>,<space>,<times> <interval> -- specifies the interval of failures. <probability> -- specifies how often it should fail in percent. <space> -- specifies the size of free space where memory can be allocated safely in pages. <times> -- specifies how many times failures may happen at most. Debugfs: /debug/fail_page_alloc/interval /debug/fail_page_alloc/probability /debug/fail_page_alloc/specifies /debug/fail_page_alloc/times /debug/fail_page_alloc/ignore-gfp-highmem /debug/fail_page_alloc/ignore-gfp-wait Example: fail_page_alloc=10,100,0,-1 The page allocation (alloc_pages(), ...) fails once per 10 times. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:45 -08:00

[PATCH] fault-injection Kconfig cleanup - Fix some spelling and grammatical errors - Make the Kconfig menu more conventional. First you select fault-injection, then under that you select particular clients of it. Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Don Mullis <dwm@meer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:49 -08:00

[PATCH] fault-injection capability for alloc_pages() This patch provides fault-injection capability for alloc_pages() Boot option: fail_page_alloc=<interval>,<probability>,<space>,<times> <interval> -- specifies the interval of failures. <probability> -- specifies how often it should fail in percent. <space> -- specifies the size of free space where memory can be allocated safely in pages. <times> -- specifies how many times failures may happen at most. Debugfs: /debug/fail_page_alloc/interval /debug/fail_page_alloc/probability /debug/fail_page_alloc/specifies /debug/fail_page_alloc/times /debug/fail_page_alloc/ignore-gfp-highmem /debug/fail_page_alloc/ignore-gfp-wait Example: fail_page_alloc=10,100,0,-1 The page allocation (alloc_pages(), ...) fails once per 10 times. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:45 -08:00

[PATCH] fault-injection capability for disk IO This patch provides fault-injection capability for disk IO. Boot option: fail_make_request=<probability>,<interval>,<space>,<times> <interval> -- specifies the interval of failures. <probability> -- specifies how often it should fail in percent. <space> -- specifies the size of free space where disk IO can be issued safely in bytes. <times> -- specifies how many times failures may happen at most. Debugfs: /debug/fail_make_request/interval /debug/fail_make_request/probability /debug/fail_make_request/specifies /debug/fail_make_request/times Example: fail_make_request=10,100,0,-1 echo 1 > /sys/blocks/hda/hda1/make-it-fail generic_make_request() on /dev/hda1 fails once per 10 times. Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:46 -08:00

Fix typo in new debug options. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>

2006-12-12 20:16:36 +01:00

block: add fault injection mechanism for faking request timeouts Only works for the generic request timer handling. Allows one to sporadically ignore request completions, thus exercising the timeout handling. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2008-09-14 05:56:33 -07:00

[PATCH] fault-injection capability for disk IO This patch provides fault-injection capability for disk IO. Boot option: fail_make_request=<probability>,<interval>,<space>,<times> <interval> -- specifies the interval of failures. <probability> -- specifies how often it should fail in percent. <space> -- specifies the size of free space where disk IO can be issued safely in bytes. <times> -- specifies how many times failures may happen at most. Debugfs: /debug/fail_make_request/interval /debug/fail_make_request/probability /debug/fail_make_request/specifies /debug/fail_make_request/times Example: fail_make_request=10,100,0,-1 echo 1 > /sys/blocks/hda/hda1/make-it-fail generic_make_request() on /dev/hda1 fails once per 10 times. Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:46 -08:00

[PATCH] fault-injection Kconfig cleanup - Fix some spelling and grammatical errors - Make the Kconfig menu more conventional. First you select fault-injection, then under that you select particular clients of it. Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Don Mullis <dwm@meer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:49 -08:00

[PATCH] fault-injection capability for disk IO This patch provides fault-injection capability for disk IO. Boot option: fail_make_request=<probability>,<interval>,<space>,<times> <interval> -- specifies the interval of failures. <probability> -- specifies how often it should fail in percent. <space> -- specifies the size of free space where disk IO can be issued safely in bytes. <times> -- specifies how many times failures may happen at most. Debugfs: /debug/fail_make_request/interval /debug/fail_make_request/probability /debug/fail_make_request/specifies /debug/fail_make_request/times Example: fail_make_request=10,100,0,-1 echo 1 > /sys/blocks/hda/hda1/make-it-fail generic_make_request() on /dev/hda1 fails once per 10 times. Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:46 -08:00

block: add fault injection mechanism for faking request timeouts Only works for the generic request timer handling. Allows one to sporadically ignore request completions, thus exercising the timeout handling. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2008-09-14 05:56:33 -07:00

[PATCH] fault-injection capabilities infrastructure This patch provides base functions implement to fault-injection capabilities. - The function should_fail() is taken from failmalloc-1.0 (http://www.nongnu.org/failmalloc/) [akpm@osdl.org: cleanups, comments, add __init] Cc: <okuji@enbug.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Don Mullis <dwm@meer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:43 -08:00

[PATCH] fault-injection Kconfig cleanup - Fix some spelling and grammatical errors - Make the Kconfig menu more conventional. First you select fault-injection, then under that you select particular clients of it. Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Don Mullis <dwm@meer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:49 -08:00

[PATCH] fault-injection capabilities infrastructure This patch provides base functions implement to fault-injection capabilities. - The function should_fail() is taken from failmalloc-1.0 (http://www.nongnu.org/failmalloc/) [akpm@osdl.org: cleanups, comments, add __init] Cc: <okuji@enbug.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Don Mullis <dwm@meer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:43 -08:00

[PATCH] fault-injection Kconfig cleanup - Fix some spelling and grammatical errors - Make the Kconfig menu more conventional. First you select fault-injection, then under that you select particular clients of it. Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Don Mullis <dwm@meer.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:39:49 -08:00

[PATCH] fault injection: split up stacktrace filter Kconfig option There is no prompt for CONFIG_STACKTRACE, so FAULT_INJECTION cannot be selected without LOCKDEP enabled. (found by Paolo 'Blaisorblade' Giarrusso) In order to fix such broken Kconfig dependency, this patch splits up the stacktrace filter support for fault injection by new Kconfig option, which enables to use fault injection on the architecture which doesn't have general stacktrace support. Cc: "Paolo 'Blaisorblade' Giarrusso" <blaisorblade@yahoo.it> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-02-20 13:57:56 -08:00

fault injection: disable stacktrace filter for x86-64 Disable stacktrace filter support for x86-64 for now. Will be enable when we can get the dwarf2 unwinder back. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-12 10:36:53 -07:00

[PATCH] fault injection: split up stacktrace filter Kconfig option There is no prompt for CONFIG_STACKTRACE, so FAULT_INJECTION cannot be selected without LOCKDEP enabled. (found by Paolo 'Blaisorblade' Giarrusso) In order to fix such broken Kconfig dependency, this patch splits up the stacktrace filter support for fault injection by new Kconfig option, which enables to use fault injection on the architecture which doesn't have general stacktrace support. Cc: "Paolo 'Blaisorblade' Giarrusso" <blaisorblade@yahoo.it> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-02-20 13:57:56 -08:00

powerpc: Work around gcc's -fno-omit-frame-pointer bug This bug is causing random crashes (http://bugzilla.kernel.org/show_bug.cgi?id=11414). -fno-omit-frame-pointer is only needed on powerpc when -pg is also supplied, and there is a gcc bug that causes incorrect code generation on 32-bit powerpc when -fno-omit-frame-pointer is used---it uses stack locations below the stack pointer, which is not allowed by the ABI because those locations can and sometimes do get corrupted by an interrupt. This ensures that CONFIG_FRAME_POINTER is only selected by ftrace. When CONFIG_FTRACE is enabled we also pass -mno-sched-epilog to work around the gcc codegen bug. Patch based on work by: Andreas Schwab <schwab@suse.de> Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>

2008-09-02 16:50:38 +10:00

[PATCH] fault injection: split up stacktrace filter Kconfig option There is no prompt for CONFIG_STACKTRACE, so FAULT_INJECTION cannot be selected without LOCKDEP enabled. (found by Paolo 'Blaisorblade' Giarrusso) In order to fix such broken Kconfig dependency, this patch splits up the stacktrace filter support for fault injection by new Kconfig option, which enables to use fault injection on the architecture which doesn't have general stacktrace support. Cc: "Paolo 'Blaisorblade' Giarrusso" <blaisorblade@yahoo.it> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-02-20 13:57:56 -08:00

markers: Add samples subdir Begin infrastructure for kernel code samples in the samples/ directory. Add its Kconfig and Kbuild files. Source its Kconfig file in all arch/ Kconfigs. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-18 23:41:07 -07:00

sched: latencytop support LatencyTOP kernel infrastructure; it measures latencies in the scheduler and tracks it system wide and per process. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-01-25 21:08:34 +01:00

powerpc: Work around gcc's -fno-omit-frame-pointer bug This bug is causing random crashes (http://bugzilla.kernel.org/show_bug.cgi?id=11414). -fno-omit-frame-pointer is only needed on powerpc when -pg is also supplied, and there is a gcc bug that causes incorrect code generation on 32-bit powerpc when -fno-omit-frame-pointer is used---it uses stack locations below the stack pointer, which is not allowed by the ABI because those locations can and sometimes do get corrupted by an interrupt. This ensures that CONFIG_FRAME_POINTER is only selected by ftrace. When CONFIG_FTRACE is enabled we also pass -mno-sched-epilog to work around the gcc codegen bug. Patch based on work by: Andreas Schwab <schwab@suse.de> Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>

2008-09-02 16:50:38 +10:00

sched: latencytop support LatencyTOP kernel infrastructure; it measures latencies in the scheduler and tracks it system wide and per process. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-01-25 21:08:34 +01:00

latencytop: Change Kconfig dependency. Change latencytop Kconfig entry so it doesn't list the archictectures that support it. Instead introduce HAVE_LATENCY_SUPPORT which any architecture can set. Should reduce patch conflicts. Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Holger Wolf <wolf@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-02-01 17:45:14 +01:00

sched: latencytop support LatencyTOP kernel infrastructure; it measures latencies in the scheduler and tracks it system wide and per process. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-01-25 21:08:34 +01:00

Move sysctl check into debugging section and don't make it default y I noticed that sysctl_check.o was the largest object file in a allnoconfig build in kernel/*. 36243 0 0 36243 8d93 kernel/sysctl_check.o This is because it was default y and && EMBEDDED. But I don't really see a need for a non kernel developer to have their sysctls checked all the time. So move the Kconfig into the kernel debugging section and also drop the default y and the EMBEDDED check. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-08-16 07:53:05 +02:00

ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2008-05-12 21:20:42 +02:00

x86: early boot debugging via FireWire (ohci1394_dma=early) This patch adds a new configuration option, which adds support for a new early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch() to decide wether OHCI-1394 FireWire controllers should be initialized and enabled for physical DMA access to allow remote debugging of early problems like issues ACPI or other subsystems which are executed very early. If the config option is not enabled, no code is changed, and if the boot paramenter is not given, no new code is executed, and independent of that, all new code is freed after boot, so the config option can be even enabled in standard, non-debug kernels. With specialized tools, it is then possible to get debugging information from machines which have no serial ports (notebooks) such as the printk buffer contents, or any data which can be referenced from global pointers, if it is stored below the 4GB limit and even memory dumps of of the physical RAM region below the 4GB limit can be taken without any cooperation from the CPU of the host, so the machine can be crashed early, it does not matter. In the extreme, even kernel debuggers can be accessed in this way. I wrote a small kgdb module and an accompanying gdb stub for FireWire which allows to gdb to talk to kgdb using remote remory reads and writes over FireWire. An version of the gdb stub fore FireWire is able to read all global data from a system which is running a a normal kernel without any kernel debugger, without any interruption or support of the system's CPU. That way, e.g. the task struct and so on can be read and even manipulated when the physical DMA access is granted. A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt and I've put a copy online at ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt It also has links to all the tools which are available to make use of it another copy of it is online at: ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff Signed-Off-By: Bernhard Kaindl <bk@suse.de> Tested-By: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2008-01-30 13:34:11 +01:00

firewire: fw-ohci: add option for remote debugging This way firewire-ohci can be used for remote debugging like ohci1394. Version with amendment from Fri, 11 Apr 2008 00:08:08 +0200. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Bernhard Kaindl <bk@suse.de>

2008-02-28 20:54:43 +01:00

x86: early boot debugging via FireWire (ohci1394_dma=early) This patch adds a new configuration option, which adds support for a new early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch() to decide wether OHCI-1394 FireWire controllers should be initialized and enabled for physical DMA access to allow remote debugging of early problems like issues ACPI or other subsystems which are executed very early. If the config option is not enabled, no code is changed, and if the boot paramenter is not given, no new code is executed, and independent of that, all new code is freed after boot, so the config option can be even enabled in standard, non-debug kernels. With specialized tools, it is then possible to get debugging information from machines which have no serial ports (notebooks) such as the printk buffer contents, or any data which can be referenced from global pointers, if it is stored below the 4GB limit and even memory dumps of of the physical RAM region below the 4GB limit can be taken without any cooperation from the CPU of the host, so the machine can be crashed early, it does not matter. In the extreme, even kernel debuggers can be accessed in this way. I wrote a small kgdb module and an accompanying gdb stub for FireWire which allows to gdb to talk to kgdb using remote remory reads and writes over FireWire. An version of the gdb stub fore FireWire is able to read all global data from a system which is running a a normal kernel without any kernel debugger, without any interruption or support of the system's CPU. That way, e.g. the task struct and so on can be read and even manipulated when the physical DMA access is granted. A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt and I've put a copy online at ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt It also has links to all the tools which are available to make use of it another copy of it is online at: ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff Signed-Off-By: Bernhard Kaindl <bk@suse.de> Tested-By: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2008-01-30 13:34:11 +01:00

sched: latencytop support LatencyTOP kernel infrastructure; it measures latencies in the scheduler and tracks it system wide and per process. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-01-25 21:08:34 +01:00

firewire: fw-ohci: add option for remote debugging This way firewire-ohci can be used for remote debugging like ohci1394. Version with amendment from Fri, 11 Apr 2008 00:08:08 +0200. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Bernhard Kaindl <bk@suse.de>

2008-02-28 20:54:43 +01:00

docsrc: build Documentation/ sources Currently source files in the Documentation/ sub-dir can easily bit-rot since they are not generally buildable, either because they are hidden in text files or because there are no Makefile rules for them. This needs to be fixed so that the source files remain usable and good examples of code instead of bad examples. Add the ability to build source files that are in the Documentation/ dir. Add to Kconfig as "BUILD_DOCSRC" config symbol. Use "CONFIG_BUILD_DOCSRC=1 make ..." to build objects from the Documentation/ sources. Or enable BUILD_DOCSRC in the *config system. However, this symbol depends on HEADERS_CHECK since the header files need to be installed (for userspace builds). Built (using cross-tools) for x86-64, i386, alpha, ia64, sparc32, sparc64, powerpc, sh, m68k, & mips. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-08-12 15:09:06 -07:00

driver core: basic infrastructure for per-module dynamic debug messages Base infrastructure to enable per-module debug messages. I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes control of debugging statements on a per-module basis in one /proc file, currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG, is not set, debugging statements can still be enabled as before, often by defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set. The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls can be dynamically enabled/disabled on a per-module basis. Future plans include extending this functionality to subsystems, that define their own debug levels and flags. Usage: Dynamic debugging is controlled by the debugfs file, <debugfs>/dynamic_printk/modules. This file contains a list of the modules that can be enabled. The format of the file is as follows: <module_name> <enabled=0/1> . . . <module_name> : Name of the module in which the debug call resides <enabled=0/1> : whether the messages are enabled or not For example: snd_hda_intel enabled=0 fixup enabled=1 driver enabled=0 Enable a module: $echo "set enabled=1 <module_name>" > dynamic_printk/modules Disable a module: $echo "set enabled=0 <module_name>" > dynamic_printk/modules Enable all modules: $echo "set enabled=1 all" > dynamic_printk/modules Disable all modules: $echo "set enabled=0 all" > dynamic_printk/modules Finally, passing "dynamic_printk" at the command line enables debugging for all modules. This mode can be turned off via the above disable command. [gkh: minor cleanups and tweaks to make the build work quietly] Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2008-08-12 16:46:19 -04:00

markers: Add samples subdir Begin infrastructure for kernel code samples in the samples/ directory. Add its Kconfig and Kbuild files. Source its Kconfig file in all arch/ Kconfigs. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-18 23:41:07 -07:00

kgdb: core kgdb core code. Handles the protocol and the arch details. [ mingo@elte.hu: heavily modified, simplified and cleaned up. ] [ xemul@openvz.org: use find_task_by_pid_ns ] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

2008-04-17 20:05:37 +02:00

872 lines 30 KiB Raw Normal View History

872 lines

30 KiB

Raw Normal View History