2020-03-21 12:19:07 +01:00
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-01-10 22:13:58 -07:00
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|
|
|
|
|
|
2019-10-17 14:42:58 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-02-24 11:32:45 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-01-11 09:43:02 -07:00
|
|
|
|
2020-06-17 17:53:55 +08:00
|
|
|
|
|
|
|
|
|
2019-04-09 14:56:44 -06:00
|
|
|
|
2019-04-19 13:34:07 -06:00
|
|
|
|
2019-09-17 12:26:57 -06:00
|
|
|
|
2019-10-17 14:42:58 -06:00
|
|
|
|
2019-10-28 21:49:21 -06:00
|
|
|
|
2019-12-11 11:20:36 -07:00
|
|
|
|
2019-12-13 21:18:10 -07:00
|
|
|
|
2019-12-25 22:03:45 -07:00
|
|
|
|
2020-02-24 11:32:45 +03:00
|
|
|
|
2020-09-28 14:23:58 -06:00
|
|
|
|
2020-09-28 14:27:37 -06:00
|
|
|
|
2021-07-08 13:34:47 +07:00
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|
|
|
|
|
|
2021-06-24 15:09:59 +01:00
|
|
|
|
io_uring: add support for pre-mapped user IO buffers
If we have fixed user buffers, we can map them into the kernel when we
setup the io_uring. That avoids the need to do get_user_pages() for
each and every IO.
To utilize this feature, the application must call io_uring_register()
after having setup an io_uring instance, passing in
IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to
an iovec array, and the nr_args should contain how many iovecs the
application wishes to map.
If successful, these buffers are now mapped into the kernel, eligible
for IO. To use these fixed buffers, the application must use the
IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then
set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len
must point to somewhere inside the indexed buffer.
The application may register buffers throughout the lifetime of the
io_uring instance. It can call io_uring_register() with
IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of
buffers, and then register a new set. The application need not
unregister buffers explicitly before shutting down the io_uring
instance.
It's perfectly valid to setup a larger buffer, and then sometimes only
use parts of it for an IO. As long as the range is within the originally
mapped region, it will work just fine.
For now, buffers must not be file backed. If file backed buffers are
passed in, the registration will fail with -1/EOPNOTSUPP. This
restriction may be relaxed in the future.
RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat
arbitrary 1G per buffer size is also imposed.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09 09:16:05 -07:00
|
|
|
|
2021-06-24 15:09:59 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-25 12:25:45 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-06-24 15:09:59 +01:00
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|
|
|
|
|
|
2020-01-18 20:22:41 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
io_uring: support buffer selection for OP_READ and OP_RECV
If a server process has tons of pending socket connections, generally
it uses epoll to wait for activity. When the socket is ready for reading
(or writing), the task can select a buffer and issue a recv/send on the
given fd.
Now that we have fast (non-async thread) support, a task can have tons
of pending reads or writes pending. But that means they need buffers to
back that data, and if the number of connections is high enough, having
them preallocated for all possible connections is unfeasible.
With IORING_OP_PROVIDE_BUFFERS, an application can register buffers to
use for any request. The request then sets IOSQE_BUFFER_SELECT in the
sqe, and a given group ID in sqe->buf_group. When the fd becomes ready,
a free buffer from the specified group is selected. If none are
available, the request is terminated with -ENOBUFS. If successful, the
CQE on completion will contain the buffer ID chosen in the cqe->flags
member, encoded as:
(buffer_id << IORING_CQE_BUFFER_SHIFT) | IORING_CQE_F_BUFFER;
Once a buffer has been consumed by a request, it is no longer available
and must be registered again with IORING_OP_PROVIDE_BUFFERS.
Requests need to support this feature. For now, IORING_OP_READ and
IORING_OP_RECV support it. This is checked on SQE submission, a CQE with
res == -EOPNOTSUPP will be posted if attempted on unsupported requests.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-23 16:42:51 -07:00
|
|
|
|
2020-01-18 20:22:41 +03:00
|
|
|
|
|
|
|
|
|
2019-01-10 22:13:58 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-01-18 20:22:41 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
io_uring: support buffer selection for OP_READ and OP_RECV
If a server process has tons of pending socket connections, generally
it uses epoll to wait for activity. When the socket is ready for reading
(or writing), the task can select a buffer and issue a recv/send on the
given fd.
Now that we have fast (non-async thread) support, a task can have tons
of pending reads or writes pending. But that means they need buffers to
back that data, and if the number of connections is high enough, having
them preallocated for all possible connections is unfeasible.
With IORING_OP_PROVIDE_BUFFERS, an application can register buffers to
use for any request. The request then sets IOSQE_BUFFER_SELECT in the
sqe, and a given group ID in sqe->buf_group. When the fd becomes ready,
a free buffer from the specified group is selected. If none are
available, the request is terminated with -ENOBUFS. If successful, the
CQE on completion will contain the buffer ID chosen in the cqe->flags
member, encoded as:
(buffer_id << IORING_CQE_BUFFER_SHIFT) | IORING_CQE_F_BUFFER;
Once a buffer has been consumed by a request, it is no longer available
and must be registered again with IORING_OP_PROVIDE_BUFFERS.
Requests need to support this feature. For now, IORING_OP_READ and
IORING_OP_RECV support it. This is checked on SQE submission, a CQE with
res == -EOPNOTSUPP will be posted if attempted on unsupported requests.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-23 16:42:51 -07:00
|
|
|
|
|
|
|
|
|
2019-01-10 22:13:58 -07:00
|
|
|
|
2019-01-09 08:59:42 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
io_uring: add submission polling
This enables an application to do IO, without ever entering the kernel.
By using the SQ ring to fill in new sqes and watching for completions
on the CQ ring, we can submit and reap IOs without doing a single system
call. The kernel side thread will poll for new submissions, and in case
of HIPRI/polled IO, it'll also poll for completions.
By default, we allow 1 second of active spinning. This can by changed
by passing in a different grace period at io_uring_register(2) time.
If the thread exceeds this idle time without having any work to do, it
will set:
sq_ring->flags |= IORING_SQ_NEED_WAKEUP.
The application will have to call io_uring_enter() to start things back
up again. If IO is kept busy, that will never be needed. Basically an
application that has this feature enabled will guard it's
io_uring_enter(2) call with:
read_barrier();
if (*sq_ring->flags & IORING_SQ_NEED_WAKEUP)
io_uring_enter(fd, 0, 0, IORING_ENTER_SQ_WAKEUP);
instead of calling it unconditionally.
It's mandatory to use fixed files with this feature. Failure to do so
will result in the application getting an -EBADF CQ entry when
submitting IO.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 11:22:30 -07:00
|
|
|
|
|
|
|
|
|
2019-10-04 12:10:03 -06:00
|
|
|
|
2019-12-28 15:39:54 -07:00
|
|
|
|
2020-01-28 03:15:48 +03:00
|
|
|
|
2020-08-27 16:58:31 +02:00
|
|
|
|
2019-01-09 08:59:42 -07:00
|
|
|
|
2019-12-11 15:55:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-12-10 10:38:56 -07:00
|
|
|
|
2019-12-11 11:20:36 -07:00
|
|
|
|
2019-12-11 14:02:38 -07:00
|
|
|
|
2019-12-09 11:22:50 -07:00
|
|
|
|
2019-12-13 21:18:10 -07:00
|
|
|
|
2019-12-22 15:19:35 -07:00
|
|
|
|
|
|
|
|
|
2019-12-25 22:03:45 -07:00
|
|
|
|
2019-12-25 22:18:28 -07:00
|
|
|
|
2020-01-04 20:19:44 -07:00
|
|
|
|
|
|
|
|
|
2020-01-08 17:59:24 -07:00
|
|
|
|
2020-01-08 15:18:09 -07:00
|
|
|
|
2020-02-24 11:32:45 +03:00
|
|
|
|
2020-02-23 16:41:33 -07:00
|
|
|
|
2020-03-02 16:32:28 -07:00
|
|
|
|
2020-05-17 14:18:06 +03:00
|
|
|
|
2020-09-05 11:14:22 -06:00
|
|
|
|
2020-09-28 14:23:58 -06:00
|
|
|
|
2020-09-28 14:27:37 -06:00
|
|
|
|
2021-07-08 13:34:45 +07:00
|
|
|
|
2021-07-08 13:34:46 +07:00
|
|
|
|
2021-07-08 13:34:47 +07:00
|
|
|
|
2019-12-11 15:55:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-01-11 09:43:02 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|
2019-10-15 16:48:15 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-28 19:54:39 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-27 17:11:06 -06:00
|
|
|
|
2021-08-28 19:54:39 -06:00
|
|
|
|
2020-02-24 11:32:45 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-02-22 22:08:01 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
io_uring: allow events and user_data update of running poll requests
This adds two new POLL_ADD flags, IORING_POLL_UPDATE_EVENTS and
IORING_POLL_UPDATE_USER_DATA. As with the other POLL_ADD flag, these are
masked into sqe->len. If set, the POLL_ADD will have the following
behavior:
- sqe->addr must contain the the user_data of the poll request that
needs to be modified. This field is otherwise invalid for a POLL_ADD
command.
- If IORING_POLL_UPDATE_EVENTS is set, sqe->poll_events must contain the
new mask for the existing poll request. There are no checks for whether
these are identical or not, if a matching poll request is found, then it
is re-armed with the new mask.
- If IORING_POLL_UPDATE_USER_DATA is set, sqe->off must contain the new
user_data for the existing poll request.
A POLL_ADD with any of these flags set may complete with any of the
following results:
1) 0, which means that we successfully found the existing poll request
specified, and performed the re-arm procedure. Any error from that
re-arm will be exposed as a completion event for that original poll
request, not for the update request.
2) -ENOENT, if no existing poll request was found with the given
user_data.
3) -EALREADY, if the existing poll request was already in the process of
being removed/canceled/completing.
4) -EACCES, if an attempt was made to modify an internal poll request
(eg not one originally issued ass IORING_OP_POLL_ADD).
The usual -EINVAL cases apply as well, if any invalid fields are set
in the sqe for this command type.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-17 08:37:41 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-02-22 22:08:01 -07:00
|
|
|
|
|
|
|
|
|
io_uring: allow events and user_data update of running poll requests
This adds two new POLL_ADD flags, IORING_POLL_UPDATE_EVENTS and
IORING_POLL_UPDATE_USER_DATA. As with the other POLL_ADD flag, these are
masked into sqe->len. If set, the POLL_ADD will have the following
behavior:
- sqe->addr must contain the the user_data of the poll request that
needs to be modified. This field is otherwise invalid for a POLL_ADD
command.
- If IORING_POLL_UPDATE_EVENTS is set, sqe->poll_events must contain the
new mask for the existing poll request. There are no checks for whether
these are identical or not, if a matching poll request is found, then it
is re-armed with the new mask.
- If IORING_POLL_UPDATE_USER_DATA is set, sqe->off must contain the new
user_data for the existing poll request.
A POLL_ADD with any of these flags set may complete with any of the
following results:
1) 0, which means that we successfully found the existing poll request
specified, and performed the re-arm procedure. Any error from that
re-arm will be exposed as a completion event for that original poll
request, not for the update request.
2) -ENOENT, if no existing poll request was found with the given
user_data.
3) -EALREADY, if the existing poll request was already in the process of
being removed/canceled/completing.
4) -EACCES, if an attempt was made to modify an internal poll request
(eg not one originally issued ass IORING_OP_POLL_ADD).
The usual -EINVAL cases apply as well, if any invalid fields are set
in the sqe for this command type.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-17 08:37:41 -06:00
|
|
|
|
|
|
|
|
|
2021-02-22 22:08:01 -07:00
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
io_uring: support buffer selection for OP_READ and OP_RECV
If a server process has tons of pending socket connections, generally
it uses epoll to wait for activity. When the socket is ready for reading
(or writing), the task can select a buffer and issue a recv/send on the
given fd.
Now that we have fast (non-async thread) support, a task can have tons
of pending reads or writes pending. But that means they need buffers to
back that data, and if the number of connections is high enough, having
them preallocated for all possible connections is unfeasible.
With IORING_OP_PROVIDE_BUFFERS, an application can register buffers to
use for any request. The request then sets IOSQE_BUFFER_SELECT in the
sqe, and a given group ID in sqe->buf_group. When the fd becomes ready,
a free buffer from the specified group is selected. If none are
available, the request is terminated with -ENOBUFS. If successful, the
CQE on completion will contain the buffer ID chosen in the cqe->flags
member, encoded as:
(buffer_id << IORING_CQE_BUFFER_SHIFT) | IORING_CQE_F_BUFFER;
Once a buffer has been consumed by a request, it is no longer available
and must be registered again with IORING_OP_PROVIDE_BUFFERS.
Requests need to support this feature. For now, IORING_OP_READ and
IORING_OP_RECV support it. This is checked on SQE submission, a CQE with
res == -EOPNOTSUPP will be posted if attempted on unsupported requests.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-23 16:42:51 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-02-22 22:08:01 -07:00
|
|
|
|
io_uring: support buffer selection for OP_READ and OP_RECV
If a server process has tons of pending socket connections, generally
it uses epoll to wait for activity. When the socket is ready for reading
(or writing), the task can select a buffer and issue a recv/send on the
given fd.
Now that we have fast (non-async thread) support, a task can have tons
of pending reads or writes pending. But that means they need buffers to
back that data, and if the number of connections is high enough, having
them preallocated for all possible connections is unfeasible.
With IORING_OP_PROVIDE_BUFFERS, an application can register buffers to
use for any request. The request then sets IOSQE_BUFFER_SELECT in the
sqe, and a given group ID in sqe->buf_group. When the fd becomes ready,
a free buffer from the specified group is selected. If none are
available, the request is terminated with -ENOBUFS. If successful, the
CQE on completion will contain the buffer ID chosen in the cqe->flags
member, encoded as:
(buffer_id << IORING_CQE_BUFFER_SHIFT) | IORING_CQE_F_BUFFER;
Once a buffer has been consumed by a request, it is no longer available
and must be registered again with IORING_OP_PROVIDE_BUFFERS.
Requests need to support this feature. For now, IORING_OP_READ and
IORING_OP_RECV support it. This is checked on SQE submission, a CQE with
res == -EOPNOTSUPP will be posted if attempted on unsupported requests.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-23 16:42:51 -07:00
|
|
|
|
|
|
|
|
|
2021-02-22 22:08:01 -07:00
|
|
|
|
io_uring: support buffer selection for OP_READ and OP_RECV
If a server process has tons of pending socket connections, generally
it uses epoll to wait for activity. When the socket is ready for reading
(or writing), the task can select a buffer and issue a recv/send on the
given fd.
Now that we have fast (non-async thread) support, a task can have tons
of pending reads or writes pending. But that means they need buffers to
back that data, and if the number of connections is high enough, having
them preallocated for all possible connections is unfeasible.
With IORING_OP_PROVIDE_BUFFERS, an application can register buffers to
use for any request. The request then sets IOSQE_BUFFER_SELECT in the
sqe, and a given group ID in sqe->buf_group. When the fd becomes ready,
a free buffer from the specified group is selected. If none are
available, the request is terminated with -ENOBUFS. If successful, the
CQE on completion will contain the buffer ID chosen in the cqe->flags
member, encoded as:
(buffer_id << IORING_CQE_BUFFER_SHIFT) | IORING_CQE_F_BUFFER;
Once a buffer has been consumed by a request, it is no longer available
and must be registered again with IORING_OP_PROVIDE_BUFFERS.
Requests need to support this feature. For now, IORING_OP_READ and
IORING_OP_RECV support it. This is checked on SQE submission, a CQE with
res == -EOPNOTSUPP will be posted if attempted on unsupported requests.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-23 16:42:51 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
io_uring: add submission polling
This enables an application to do IO, without ever entering the kernel.
By using the SQ ring to fill in new sqes and watching for completions
on the CQ ring, we can submit and reap IOs without doing a single system
call. The kernel side thread will poll for new submissions, and in case
of HIPRI/polled IO, it'll also poll for completions.
By default, we allow 1 second of active spinning. This can by changed
by passing in a different grace period at io_uring_register(2) time.
If the thread exceeds this idle time without having any work to do, it
will set:
sq_ring->flags |= IORING_SQ_NEED_WAKEUP.
The application will have to call io_uring_enter() to start things back
up again. If IO is kept busy, that will never be needed. Basically an
application that has this feature enabled will guard it's
io_uring_enter(2) call with:
read_barrier();
if (*sq_ring->flags & IORING_SQ_NEED_WAKEUP)
io_uring_enter(fd, 0, 0, IORING_ENTER_SQ_WAKEUP);
instead of calling it unconditionally.
It's mandatory to use fixed files with this feature. Failure to do so
will result in the application getting an -EBADF CQ entry when
submitting IO.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 11:22:30 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
io_uring: export cq overflow status to userspace
For those applications which are not willing to use io_uring_enter()
to reap and handle cqes, they may completely rely on liburing's
io_uring_peek_cqe(), but if cq ring has overflowed, currently because
io_uring_peek_cqe() is not aware of this overflow, it won't enter
kernel to flush cqes, below test program can reveal this bug:
static void test_cq_overflow(struct io_uring *ring)
{
struct io_uring_cqe *cqe;
struct io_uring_sqe *sqe;
int issued = 0;
int ret = 0;
do {
sqe = io_uring_get_sqe(ring);
if (!sqe) {
fprintf(stderr, "get sqe failed\n");
break;;
}
ret = io_uring_submit(ring);
if (ret <= 0) {
if (ret != -EBUSY)
fprintf(stderr, "sqe submit failed: %d\n", ret);
break;
}
issued++;
} while (ret > 0);
assert(ret == -EBUSY);
printf("issued requests: %d\n", issued);
while (issued) {
ret = io_uring_peek_cqe(ring, &cqe);
if (ret) {
if (ret != -EAGAIN) {
fprintf(stderr, "peek completion failed: %s\n",
strerror(ret));
break;
}
printf("left requets: %d\n", issued);
continue;
}
io_uring_cqe_seen(ring, cqe);
issued--;
printf("left requets: %d\n", issued);
}
}
int main(int argc, char *argv[])
{
int ret;
struct io_uring ring;
ret = io_uring_queue_init(16, &ring, 0);
if (ret) {
fprintf(stderr, "ring setup failed: %d\n", ret);
return 1;
}
test_cq_overflow(&ring);
return 0;
}
To fix this issue, export cq overflow status to userspace by adding new
IORING_SQ_CQ_OVERFLOW flag, then helper functions() in liburing, such as
io_uring_peek_cqe, can be aware of this cq overflow and do flush accordingly.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-09 09:15:29 +08:00
|
|
|
|
io_uring: add submission polling
This enables an application to do IO, without ever entering the kernel.
By using the SQ ring to fill in new sqes and watching for completions
on the CQ ring, we can submit and reap IOs without doing a single system
call. The kernel side thread will poll for new submissions, and in case
of HIPRI/polled IO, it'll also poll for completions.
By default, we allow 1 second of active spinning. This can by changed
by passing in a different grace period at io_uring_register(2) time.
If the thread exceeds this idle time without having any work to do, it
will set:
sq_ring->flags |= IORING_SQ_NEED_WAKEUP.
The application will have to call io_uring_enter() to start things back
up again. If IO is kept busy, that will never be needed. Basically an
application that has this feature enabled will guard it's
io_uring_enter(2) call with:
read_barrier();
if (*sq_ring->flags & IORING_SQ_NEED_WAKEUP)
io_uring_enter(fd, 0, 0, IORING_ENTER_SQ_WAKEUP);
instead of calling it unconditionally.
It's mandatory to use fixed files with this feature. Failure to do so
will result in the application getting an -EBADF CQ entry when
submitting IO.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 11:22:30 -07:00
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-05-15 18:38:04 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|
|
|
|
|
|
2020-05-15 18:38:05 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
io_uring: add submission polling
This enables an application to do IO, without ever entering the kernel.
By using the SQ ring to fill in new sqes and watching for completions
on the CQ ring, we can submit and reap IOs without doing a single system
call. The kernel side thread will poll for new submissions, and in case
of HIPRI/polled IO, it'll also poll for completions.
By default, we allow 1 second of active spinning. This can by changed
by passing in a different grace period at io_uring_register(2) time.
If the thread exceeds this idle time without having any work to do, it
will set:
sq_ring->flags |= IORING_SQ_NEED_WAKEUP.
The application will have to call io_uring_enter() to start things back
up again. If IO is kept busy, that will never be needed. Basically an
application that has this feature enabled will guard it's
io_uring_enter(2) call with:
read_barrier();
if (*sq_ring->flags & IORING_SQ_NEED_WAKEUP)
io_uring_enter(fd, 0, 0, IORING_ENTER_SQ_WAKEUP);
instead of calling it unconditionally.
It's mandatory to use fixed files with this feature. Failure to do so
will result in the application getting an -EBADF CQ entry when
submitting IO.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 11:22:30 -07:00
|
|
|
|
2020-09-03 12:12:41 -06:00
|
|
|
|
2020-11-03 10:54:37 +08:00
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
io_uring: add submission polling
This enables an application to do IO, without ever entering the kernel.
By using the SQ ring to fill in new sqes and watching for completions
on the CQ ring, we can submit and reap IOs without doing a single system
call. The kernel side thread will poll for new submissions, and in case
of HIPRI/polled IO, it'll also poll for completions.
By default, we allow 1 second of active spinning. This can by changed
by passing in a different grace period at io_uring_register(2) time.
If the thread exceeds this idle time without having any work to do, it
will set:
sq_ring->flags |= IORING_SQ_NEED_WAKEUP.
The application will have to call io_uring_enter() to start things back
up again. If IO is kept busy, that will never be needed. Basically an
application that has this feature enabled will guard it's
io_uring_enter(2) call with:
read_barrier();
if (*sq_ring->flags & IORING_SQ_NEED_WAKEUP)
io_uring_enter(fd, 0, 0, IORING_ENTER_SQ_WAKEUP);
instead of calling it unconditionally.
It's mandatory to use fixed files with this feature. Failure to do so
will result in the application getting an -EBADF CQ entry when
submitting IO.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10 11:22:30 -07:00
|
|
|
|
|
|
|
|
|
2019-09-06 10:26:21 -06:00
|
|
|
|
2020-01-28 03:15:48 +03:00
|
|
|
|
|
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-09-06 10:26:21 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
io_uring: add support for backlogged CQ ring
Currently we drop completion events, if the CQ ring is full. That's fine
for requests with bounded completion times, but it may make it harder or
impossible to use io_uring with networked IO where request completion
times are generally unbounded. Or with POLL, for example, which is also
unbounded.
After this patch, we never overflow the ring, we simply store requests
in a backlog for later flushing. This flushing is done automatically by
the kernel. To prevent the backlog from growing indefinitely, if the
backlog is non-empty, we apply back pressure on IO submissions. Any
attempt to submit new IO with a non-empty backlog will get an -EBUSY
return from the kernel. This is a signal to the application that it has
backlogged CQ events, and that it must reap those before being allowed
to submit more IO.
Note that if we do return -EBUSY, we will have filled whatever
backlogged events into the CQ ring first, if there's room. This means
the application can safely reap events WITHOUT entering the kernel and
waiting for them, they are already available in the CQ ring.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-06 11:31:17 -07:00
|
|
|
|
2019-12-02 18:51:26 -07:00
|
|
|
|
2019-12-25 16:33:42 -07:00
|
|
|
|
2020-01-27 16:34:48 -07:00
|
|
|
|
io_uring: use poll driven retry for files that support it
Currently io_uring tries any request in a non-blocking manner, if it can,
and then retries from a worker thread if we get -EAGAIN. Now that we have
a new and fancy poll based retry backend, use that to retry requests if
the file supports it.
This means that, for example, an IORING_OP_RECVMSG on a socket no longer
requires an async thread to complete the IO. If we get -EAGAIN reading
from the socket in a non-blocking manner, we arm a poll handler for
notification on when the socket becomes readable. When it does, the
pending read is executed directly by the task again, through the io_uring
task work handlers. Not only is this faster and more efficient, it also
means we're not generating potentially tons of async threads that just
sit and block, waiting for the IO to complete.
The feature is marked with IORING_FEAT_FAST_POLL, meaning that async
pollable IO is fast, and that poll<link>other_op is fast as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-14 22:23:12 -07:00
|
|
|
|
2020-06-17 17:53:55 +08:00
|
|
|
|
2020-09-14 10:51:17 -06:00
|
|
|
|
2020-11-03 10:54:37 +08:00
|
|
|
|
2021-02-20 11:55:28 -07:00
|
|
|
|
2021-06-10 16:37:38 +01:00
|
|
|
|
2019-09-06 10:26:21 -06:00
|
|
|
|
io_uring: add support for pre-mapped user IO buffers
If we have fixed user buffers, we can map them into the kernel when we
setup the io_uring. That avoids the need to do get_user_pages() for
each and every IO.
To utilize this feature, the application must call io_uring_register()
after having setup an io_uring instance, passing in
IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to
an iovec array, and the nr_args should contain how many iovecs the
application wishes to map.
If successful, these buffers are now mapped into the kernel, eligible
for IO. To use these fixed buffers, the application must use the
IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then
set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len
must point to somewhere inside the indexed buffer.
The application may register buffers throughout the lifetime of the
io_uring instance. It can call io_uring_register() with
IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of
buffers, and then register a new set. The application need not
unregister buffers explicitly before shutting down the io_uring
instance.
It's perfectly valid to setup a larger buffer, and then sometimes only
use parts of it for an IO. As long as the range is within the originally
mapped region, it will work just fine.
For now, buffers must not be file backed. If file backed buffers are
passed in, the registration will fail with -1/EOPNOTSUPP. This
restriction may be relaxed in the future.
RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat
arbitrary 1G per buffer size is also imposed.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09 09:16:05 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-08-27 16:58:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-08-27 16:58:30 +02:00
|
|
|
|
2020-08-27 16:58:31 +02:00
|
|
|
|
io_uring: change registration/upd/rsrc tagging ABI
There are ABI moments about recently added rsrc registration/update and
tagging that might become a nuisance in the future. First,
IORING_REGISTER_RSRC[_UPD] hide different types of resources under it,
so breaks fine control over them by restrictions. It works for now, but
once those are wanted under restrictions it would require a rework.
It was also inconvenient trying to fit a new resource not supporting
all the features (e.g. dynamic update) into the interface, so better
to return to IORING_REGISTER_* top level dispatching.
Second, register/update were considered to accept a type of resource,
however that's not a good idea because there might be several ways of
registration of a single resource type, e.g. we may want to add
non-contig buffers or anything more exquisite as dma mapped memory.
So, remove IORING_RSRC_[FILE,BUFFER] out of the ABI, and place them
internally for now to limit changes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9b554897a7c17ad6e3becc48dfed2f7af9f423d5.1623339162.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-10 16:37:37 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-08-27 16:58:29 +02:00
|
|
|
|
2021-06-17 10:19:54 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-08-27 11:33:19 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-08-27 16:58:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-10-03 13:59:56 -06:00
|
|
|
|
2021-01-15 17:37:44 +00:00
|
|
|
|
2019-10-03 13:59:56 -06:00
|
|
|
|
|
|
|
|
|
2020-01-15 17:35:38 +01:00
|
|
|
|
|
|
|
|
|
2019-10-03 13:59:56 -06:00
|
|
|
|
io_uring: add support for pre-mapped user IO buffers
If we have fixed user buffers, we can map them into the kernel when we
setup the io_uring. That avoids the need to do get_user_pages() for
each and every IO.
To utilize this feature, the application must call io_uring_register()
after having setup an io_uring instance, passing in
IORING_REGISTER_BUFFERS as the opcode. The argument must be a pointer to
an iovec array, and the nr_args should contain how many iovecs the
application wishes to map.
If successful, these buffers are now mapped into the kernel, eligible
for IO. To use these fixed buffers, the application must use the
IORING_OP_READ_FIXED and IORING_OP_WRITE_FIXED opcodes, and then
set sqe->index to the desired buffer index. sqe->addr..sqe->addr+seq->len
must point to somewhere inside the indexed buffer.
The application may register buffers throughout the lifetime of the
io_uring instance. It can call io_uring_register() with
IORING_UNREGISTER_BUFFERS as the opcode to unregister the current set of
buffers, and then register a new set. The application need not
unregister buffers explicitly before shutting down the io_uring
instance.
It's perfectly valid to setup a larger buffer, and then sometimes only
use parts of it for an IO. As long as the range is within the originally
mapped region, it will work just fine.
For now, buffers must not be file backed. If file backed buffers are
passed in, the registration will fail with -1/EOPNOTSUPP. This
restriction may be relaxed in the future.
RLIMIT_MEMLOCK is used to check how much memory we can pin. A somewhat
arbitrary 1G per buffer size is also imposed.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09 09:16:05 -07:00
|
|
|
|
2021-04-25 14:32:21 +01:00
|
|
|
|
|
|
|
|
|
io_uring: change registration/upd/rsrc tagging ABI
There are ABI moments about recently added rsrc registration/update and
tagging that might become a nuisance in the future. First,
IORING_REGISTER_RSRC[_UPD] hide different types of resources under it,
so breaks fine control over them by restrictions. It works for now, but
once those are wanted under restrictions it would require a rework.
It was also inconvenient trying to fit a new resource not supporting
all the features (e.g. dynamic update) into the interface, so better
to return to IORING_REGISTER_* top level dispatching.
Second, register/update were considered to accept a type of resource,
however that's not a good idea because there might be several ways of
registration of a single resource type, e.g. we may want to add
non-contig buffers or anything more exquisite as dma mapped memory.
So, remove IORING_RSRC_[FILE,BUFFER] out of the ABI, and place them
internally for now to limit changes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9b554897a7c17ad6e3becc48dfed2f7af9f423d5.1623339162.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-10 16:37:37 +01:00
|
|
|
|
|
|
|
|
|
2021-04-25 14:32:21 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-04-25 14:32:22 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
io_uring: change registration/upd/rsrc tagging ABI
There are ABI moments about recently added rsrc registration/update and
tagging that might become a nuisance in the future. First,
IORING_REGISTER_RSRC[_UPD] hide different types of resources under it,
so breaks fine control over them by restrictions. It works for now, but
once those are wanted under restrictions it would require a rework.
It was also inconvenient trying to fit a new resource not supporting
all the features (e.g. dynamic update) into the interface, so better
to return to IORING_REGISTER_* top level dispatching.
Second, register/update were considered to accept a type of resource,
however that's not a good idea because there might be several ways of
registration of a single resource type, e.g. we may want to add
non-contig buffers or anything more exquisite as dma mapped memory.
So, remove IORING_RSRC_[FILE,BUFFER] out of the ABI, and place them
internally for now to limit changes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9b554897a7c17ad6e3becc48dfed2f7af9f423d5.1623339162.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-10 16:37:37 +01:00
|
|
|
|
2021-04-25 14:32:22 +01:00
|
|
|
|
|
|
|
|
|
2021-01-26 15:23:28 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-01-16 15:36:52 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-08-27 16:58:30 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-11-03 10:54:37 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.
IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.
Two new system calls are added for this:
io_uring_setup(entries, params)
Sets up an io_uring instance for doing async IO. On success,
returns a file descriptor that the application can mmap to
gain access to the SQ ring, CQ ring, and io_uring_sqes.
io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
Initiates IO against the rings mapped to this fd, or waits for
them to complete, or both. The behavior is controlled by the
parameters passed in. If 'to_submit' is non-zero, then we'll
try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
kernel will wait for 'min_complete' events, if they aren't
already available. It's valid to set IORING_ENTER_GETEVENTS
and 'min_complete' == 0 at the same time, this allows the
kernel to return already completed events without waiting
for them. This is useful only for polling, as for IRQ
driven IO, the application can just check the CQ ring
without entering the kernel.
With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.
For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.
Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.
Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-07 10:46:33 -07:00
|
|
|
|