linux/net/tipc/Kconfig

60 lines
1.8 KiB

tipc: add InfiniBand media type Add InfiniBand media type based on the ethernet media type. The only real difference is that in case of InfiniBand, we need the entire 20 bytes of space reserved for media addresses, so the TIPC media type ID is not explicitly stored in the packet payload. Sample output of tipc-config: # tipc-config -v -addr -netid -nt=all -p -m -b -n -ls node address: <10.1.4> current network id: 4711 Type Lower Upper Port Identity Publication Scope 0 167776257 167776257 <10.1.1:1855512577> 1855512578 cluster 167776260 167776260 <10.1.4:1216454657> 1216454658 zone 1 1 1 <10.1.4:1216479235> 1216479236 node Ports: 1216479235: bound to {1,1} 1216454657: bound to {0,167776260} Media: eth ib Bearers: ib:ib0 Nodes known: <10.1.1>: up Link <broadcast-link> Window:20 packets RX packets:0 fragments:0/0 bundles:0/0 TX packets:0 fragments:0/0 bundles:0/0 RX naks:0 defs:0 dups:0 TX naks:0 acks:0 dups:0 Congestion bearer:0 link:0 Send queue max:0 avg:0 Link <10.1.4:ib0-10.1.1:ib0> ACTIVE MTU:2044 Priority:10 Tolerance:1500 ms Window:50 packets RX packets:80 fragments:0/0 bundles:0/0 TX packets:40 fragments:0/0 bundles:0/0 TX profile sample:22 packets average:54 octets 0-64:100% -256:0% -1024:0% -4096:0% -16384:0% -32768:0% -66000:0% RX states:410 probes:213 naks:0 defs:0 dups:0 TX states:410 probes:197 naks:0 acks:0 dups:0 Congestion bearer:0 link:0 Send queue max:1 avg:0 Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17 06:18:28 +00:00
tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 12:05:11 +07:00
tipc: introduce TIPC encryption & authentication This commit offers an option to encrypt and authenticate all messaging, including the neighbor discovery messages. The currently most advanced algorithm supported is the AEAD AES-GCM (like IPSec or TLS). All encryption/decryption is done at the bearer layer, just before leaving or after entering TIPC. Supported features: - Encryption & authentication of all TIPC messages (header + data); - Two symmetric-key modes: Cluster and Per-node; - Automatic key switching; - Key-expired revoking (sequence number wrapped); - Lock-free encryption/decryption (RCU); - Asynchronous crypto, Intel AES-NI supported; - Multiple cipher transforms; - Logs & statistics; Two key modes: - Cluster key mode: One single key is used for both TX & RX in all nodes in the cluster. - Per-node key mode: Each nodes in the cluster has one specific TX key. For RX, a node requires its peers' TX key to be able to decrypt the messages from those peers. Key setting from user-space is performed via netlink by a user program (e.g. the iproute2 'tipc' tool). Internal key state machine: Attach Align(RX) +-+ +-+ | V | V +---------+ Attach +---------+ | IDLE |---------------->| PENDING |(user = 0) +---------+ +---------+ A A Switch| A | | | | | | Free(switch/revoked) | | (Free)| +----------------------+ | |Timeout | (TX) | | |(RX) | | | | | | v | +---------+ Switch +---------+ | PASSIVE |<----------------| ACTIVE | +---------+ (RX) +---------+ (user = 1) (user >= 1) The number of TFMs is 10 by default and can be changed via the procfs 'net/tipc/max_tfms'. At this moment, as for simplicity, this file is also used to print the crypto statistics at runtime: echo 0xfff1 > /proc/sys/net/tipc/max_tfms The patch defines a new TIPC version (v7) for the encryption message (- backward compatibility as well). The message is basically encapsulated as follows: +----------------------------------------------------------+ | TIPCv7 encryption | Original TIPCv2 | Authentication | | header | packet (encrypted) | Tag | +----------------------------------------------------------+ The throughput is about ~40% for small messages (compared with non- encryption) and ~9% for large messages. With the support from hardware crypto i.e. the Intel AES-NI CPU instructions, the throughput increases upto ~85% for small messages and ~55% for large messages. By default, the new feature is inactive (i.e. no encryption) until user sets a key for TIPC. There is however also a new option - "TIPC_CRYPTO" in the kernel configuration to enable/disable the new code when needed. MAINTAINERS | add two new files 'crypto.h' & 'crypto.c' in tipc Acked-by: Ying Xue <ying.xue@windreiver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08 12:05:11 +07:00