2019-05-29 16:57:47 -07:00
|
|
|
|
2013-01-23 13:21:58 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KVM: arm64: gic-v5: Enlighten arch timer for GICv5
Now that GICv5 has arrived, the arch timer requires some TLC to
address some of the key differences introduced with GICv5.
For PPIs on GICv5, the queue_irq_unlock irq_op is used as AP lists are
not required at all for GICv5. The arch timer also introduces an
irq_op - get_input_level. Extend the arch-timer-provided irq_ops to
include the PPI op for vgic_v5 guests.
When possible, DVI (Direct Virtual Interrupt) is set for PPIs when
using a vgic_v5, which directly inject the pending state into the
guest. This means that the host never sees the interrupt for the guest
for these interrupts. This has three impacts.
* First of all, the kvm_cpu_has_pending_timer check is updated to
explicitly check if the timers are expected to fire.
* Secondly, for mapped timers (which use DVI) they must be masked on
the host prior to entering a GICv5 guest, and unmasked on the return
path. This is handled in set_timer_irq_phys_masked.
* Thirdly, it makes zero sense to attempt to inject state for a DVI'd
interrupt. Track which timers are direct, and skip the call to
kvm_vgic_inject_irq() for these.
The final, but rather important, change is that the architected PPIs
for the timers are made mandatory for a GICv5 guest. Attempts to set
them to anything else are actively rejected. Once a vgic_v5 is
initialised, the arch timer PPIs are also explicitly reinitialised to
ensure the correct GICv5-compatible PPIs are used - this also adds in
the GICv5 PPI type to the intid.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-32-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2026-03-19 15:57:45 +00:00
|
|
|
|
|
|
|
|
|
2018-07-05 16:48:23 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-30 18:47:57 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-07-05 16:48:23 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-30 18:47:57 +01:00
|
|
|
|
2018-07-05 16:48:23 +01:00
|
|
|
|
|
|
|
|
|
2023-02-24 19:16:40 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-30 18:47:56 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-24 19:16:40 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-30 18:47:44 +01:00
|
|
|
|
|
|
|
|
|
2023-03-30 18:47:51 +01:00
|
|
|
|
|
|
|
|
|
KVM: arm64: gic-v5: Enlighten arch timer for GICv5
Now that GICv5 has arrived, the arch timer requires some TLC to
address some of the key differences introduced with GICv5.
For PPIs on GICv5, the queue_irq_unlock irq_op is used as AP lists are
not required at all for GICv5. The arch timer also introduces an
irq_op - get_input_level. Extend the arch-timer-provided irq_ops to
include the PPI op for vgic_v5 guests.
When possible, DVI (Direct Virtual Interrupt) is set for PPIs when
using a vgic_v5, which directly inject the pending state into the
guest. This means that the host never sees the interrupt for the guest
for these interrupts. This has three impacts.
* First of all, the kvm_cpu_has_pending_timer check is updated to
explicitly check if the timers are expected to fire.
* Secondly, for mapped timers (which use DVI) they must be masked on
the host prior to entering a GICv5 guest, and unmasked on the return
path. This is handled in set_timer_irq_phys_masked.
* Thirdly, it makes zero sense to attempt to inject state for a DVI'd
interrupt. Track which timers are direct, and skip the call to
kvm_vgic_inject_irq() for these.
The final, but rather important, change is that the architected PPIs
for the timers are made mandatory for a GICv5 guest. Attempts to set
them to anything else are actively rejected. Once a vgic_v5 is
initialised, the arch timer PPIs are also explicitly reinitialised to
ensure the correct GICv5-compatible PPIs are used - this also adds in
the GICv5 PPI type to the intid.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-32-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2026-03-19 15:57:45 +00:00
|
|
|
|
2023-02-24 19:16:40 +00:00
|
|
|
|
|
|
|
|
|
2017-02-03 10:19:59 -05:00
|
|
|
|
2018-09-18 10:08:18 -07:00
|
|
|
|
|
|
|
|
|
2023-03-30 18:47:41 +01:00
|
|
|
|
2019-02-19 14:04:30 +01:00
|
|
|
|
2023-02-24 19:16:40 +00:00
|
|
|
|
|
|
|
|
|
2019-01-04 13:31:22 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-30 18:47:51 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-09-29 17:04:47 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-02-19 14:04:30 +01:00
|
|
|
|
|
|
|
|
|
2018-09-18 10:08:18 -07:00
|
|
|
|
|
|
|
|
|
2019-01-04 13:31:22 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-30 18:47:57 +01:00
|
|
|
|
2019-01-04 13:31:22 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-22 13:18:10 +01:00
|
|
|
|
|
|
|
|
|
2018-09-18 10:08:18 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-01-23 13:21:58 -05:00
|
|
|
|
|
|
|
|
|
KVM: x86: Unify pr_fmt to use module name for all KVM modules
Define pr_fmt using KBUILD_MODNAME for all KVM x86 code so that printks
use consistent formatting across common x86, Intel, and AMD code. In
addition to providing consistent print formatting, using KBUILD_MODNAME,
e.g. kvm_amd and kvm_intel, allows referencing SVM and VMX (and SEV and
SGX and ...) as technologies without generating weird messages, and
without causing naming conflicts with other kernel code, e.g. "SEV: ",
"tdx: ", "sgx: " etc.. are all used by the kernel for non-KVM subsystems.
Opportunistically move away from printk() for prints that need to be
modified anyways, e.g. to drop a manual "kvm: " prefix.
Opportunistically convert a few SGX WARNs that are similarly modified to
WARN_ONCE; in the very unlikely event that the WARNs fire, odds are good
that they would fire repeatedly and spam the kernel log without providing
unique information in each print.
Note, defining pr_fmt yields undesirable results for code that uses KVM's
printk wrappers, e.g. vcpu_unimpl(). But, that's a pre-existing problem
as SVM/kvm_amd already defines a pr_fmt, and thankfully use of KVM's
wrappers is relatively limited in KVM x86 code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20221130230934.1014142-35-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-30 23:09:18 +00:00
|
|
|
|
2016-05-18 16:26:00 +01:00
|
|
|
|
2023-09-20 19:50:35 +00:00
|
|
|
|
2013-01-23 13:21:58 -05:00
|
|
|
|
2024-12-17 14:23:10 +00:00
|
|
|
|
2020-04-22 08:58:22 +01:00
|
|
|
|
KVM: arm/arm64: Support arch timers with a userspace gic
If you're running with a userspace gic or other interrupt controller
(that is no vgic in the kernel), then you have so far not been able to
use the architected timers, because the output of the architected
timers, which are driven inside the kernel, was a kernel-only construct
between the arch timer code and the vgic.
This patch implements the new KVM_CAP_ARM_USER_IRQ feature, where we use a
side channel on the kvm_run structure, run->s.regs.device_irq_level, to
always notify userspace of the timer output levels when using a userspace
irqchip.
This works by ensuring that before we enter the guest, if the timer
output level has changed compared to what we last told userspace, we
don't enter the guest, but instead return to userspace to notify it of
the new level. If we are exiting, because of an MMIO for example, and
the level changed at the same time, the value is also updated and
userspace can sample the line as it needs. This is nicely achieved
simply always updating the timer_irq_level field after the main run
loop.
Note that the kvm_timer_update_irq trace event is changed to show the
host IRQ number for the timer instead of the guest IRQ number, because
the kernel no longer know which IRQ userspace wires up the timer signal
to.
Also note that this patch implements all required functionality but does
not yet advertise the capability.
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-27 21:08:06 +02:00
|
|
|
|
|
|
|
|
|
2013-01-23 13:21:58 -05:00
|
|
|
|
2014-07-04 15:54:14 +01:00
|
|
|
|
2023-03-30 18:47:51 +01:00
|
|
|
|
|
|
|
|
|
2017-05-02 20:19:15 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-02-03 10:20:08 -05:00
|
|
|
|
|
|
|
|
|
KVM: arm/arm64: Avoid timer save/restore in vcpu entry/exit
We don't need to save and restore the hardware timer state and examine
if it generates interrupts on on every entry/exit to the guest. The
timer hardware is perfectly capable of telling us when it has expired
by signaling interrupts.
When taking a vtimer interrupt in the host, we don't want to mess with
the timer configuration, we just want to forward the physical interrupt
to the guest as a virtual interrupt. We can use the split priority drop
and deactivate feature of the GIC to do this, which leaves an EOI'ed
interrupt active on the physical distributor, making sure we don't keep
taking timer interrupts which would prevent the guest from running. We
can then forward the physical interrupt to the VM using the HW bit in
the LR of the GIC, like we do already, which lets the guest directly
deactivate both the physical and virtual timer simultaneously, allowing
the timer hardware to exit the VM and generate a new physical interrupt
when the timer output is again asserted later on.
We do need to capture this state when migrating VCPUs between physical
CPUs, however, which we use the vcpu put/load functions for, which are
called through preempt notifiers whenever the thread is scheduled away
from the CPU or called directly if we return from the ioctl to
userspace.
One caveat is that we have to save and restore the timer state in both
kvm_timer_vcpu_[put/load] and kvm_timer_[schedule/unschedule], because
we can have the following flows:
1. kvm_vcpu_block
2. kvm_timer_schedule
3. schedule
4. kvm_timer_vcpu_put (preempt notifier)
5. schedule (vcpu thread gets scheduled back)
6. kvm_timer_vcpu_load (preempt notifier)
7. kvm_timer_unschedule
And a version where we don't actually call schedule:
1. kvm_vcpu_block
2. kvm_timer_schedule
7. kvm_timer_unschedule
Since kvm_timer_[schedule/unschedule] may not be followed by put/load,
but put/load also may be called independently, we call the timer
save/restore functions from both paths. Since they rely on the loaded
flag to never save/restore when unnecessary, this doesn't cause any
harm, and we ensure that all invokations of either set of functions work
as intended.
An added benefit beyond not having to read and write the timer sysregs
on every entry and exit is that we no longer have to actively write the
active state to the physical distributor, because we configured the
irq for the vtimer to only get a priority drop when handling the
interrupt in the GIC driver (we called irq_set_vcpu_affinity()), and
the interrupt stays active after firing on the host.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
2016-10-16 20:30:38 +02:00
|
|
|
|
2016-01-29 19:04:48 +00:00
|
|
|
|
|
|
|
|
|
2016-12-01 14:32:05 -05:00
|
|
|
|
2017-02-03 10:19:59 -05:00
|
|
|
|
2018-09-18 10:08:18 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-30 18:47:57 +01:00
|
|
|
|
|
|
|
|
|
2018-07-05 16:48:23 +01:00
|
|
|
|
2025-09-29 17:04:47 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-30 18:47:51 +01:00
|
|
|
|
2023-03-30 18:47:50 +01:00
|
|
|
|
KVM: arm64: gic-v5: Enlighten arch timer for GICv5
Now that GICv5 has arrived, the arch timer requires some TLC to
address some of the key differences introduced with GICv5.
For PPIs on GICv5, the queue_irq_unlock irq_op is used as AP lists are
not required at all for GICv5. The arch timer also introduces an
irq_op - get_input_level. Extend the arch-timer-provided irq_ops to
include the PPI op for vgic_v5 guests.
When possible, DVI (Direct Virtual Interrupt) is set for PPIs when
using a vgic_v5, which directly inject the pending state into the
guest. This means that the host never sees the interrupt for the guest
for these interrupts. This has three impacts.
* First of all, the kvm_cpu_has_pending_timer check is updated to
explicitly check if the timers are expected to fire.
* Secondly, for mapped timers (which use DVI) they must be masked on
the host prior to entering a GICv5 guest, and unmasked on the return
path. This is handled in set_timer_irq_phys_masked.
* Thirdly, it makes zero sense to attempt to inject state for a DVI'd
interrupt. Track which timers are direct, and skip the call to
kvm_vgic_inject_irq() for these.
The final, but rather important, change is that the architected PPIs
for the timers are made mandatory for a GICv5 guest. Attempts to set
them to anything else are actively rejected. Once a vgic_v5 is
initialised, the arch timer PPIs are also explicitly reinitialised to
ensure the correct GICv5-compatible PPIs are used - this also adds in
the GICv5 PPI type to the intid.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-32-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2026-03-19 15:57:45 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-07-05 16:48:23 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KVM: arm/arm64: Avoid timer save/restore in vcpu entry/exit
We don't need to save and restore the hardware timer state and examine
if it generates interrupts on on every entry/exit to the guest. The
timer hardware is perfectly capable of telling us when it has expired
by signaling interrupts.
When taking a vtimer interrupt in the host, we don't want to mess with
the timer configuration, we just want to forward the physical interrupt
to the guest as a virtual interrupt. We can use the split priority drop
and deactivate feature of the GIC to do this, which leaves an EOI'ed
interrupt active on the physical distributor, making sure we don't keep
taking timer interrupts which would prevent the guest from running. We
can then forward the physical interrupt to the VM using the HW bit in
the LR of the GIC, like we do already, which lets the guest directly
deactivate both the physical and virtual timer simultaneously, allowing
the timer hardware to exit the VM and generate a new physical interrupt
when the timer output is again asserted later on.
We do need to capture this state when migrating VCPUs between physical
CPUs, however, which we use the vcpu put/load functions for, which are
called through preempt notifiers whenever the thread is scheduled away
from the CPU or called directly if we return from the ioctl to
userspace.
One caveat is that we have to save and restore the timer state in both
kvm_timer_vcpu_[put/load] and kvm_timer_[schedule/unschedule], because
we can have the following flows:
1. kvm_vcpu_block
2. kvm_timer_schedule
3. schedule
4. kvm_timer_vcpu_put (preempt notifier)
5. schedule (vcpu thread gets scheduled back)
6. kvm_timer_vcpu_load (preempt notifier)
7. kvm_timer_unschedule
And a version where we don't actually call schedule:
1. kvm_vcpu_block
2. kvm_timer_schedule
7. kvm_timer_unschedule
Since kvm_timer_[schedule/unschedule] may not be followed by put/load,
but put/load also may be called independently, we call the timer
save/restore functions from both paths. Since they rely on the loaded
flag to never save/restore when unnecessary, this doesn't cause any
harm, and we ensure that all invokations of either set of functions work
as intended.
An added benefit beyond not having to read and write the timer sysregs
on every entry and exit is that we no longer have to actively write the
active state to the physical distributor, because we configured the
irq for the vtimer to only get a priority drop when handling the
interrupt in the GIC driver (we called irq_set_vcpu_affinity()), and
the interrupt stays active after firing on the host.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
2016-10-16 20:30:38 +02:00
|
|
|
|
2019-06-28 15:23:43 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-11-30 23:09:00 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-10-23 15:53:14 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KVM: arm64: Work around x1e's CNTVOFF_EL2 bogosity
It appears that on Qualcomm's x1e CPU, CNTVOFF_EL2 doesn't really
work, specially with HCR_EL2.E2H=1.
A non-zero offset results in a screaming virtual timer interrupt,
to the tune of a few 100k interrupts per second on a 4 vcpu VM.
This is also evidenced by this CPU's inability to correctly run
any of the timer selftests.
The only case this doesn't break is when this register is set to 0,
which breaks VM migration.
When HCR_EL2.E2H=0, the timer seems to behave normally, and does
not result in an interrupt storm.
As a workaround, use the fact that this CPU implements FEAT_ECV,
and trap all accesses to the virtual timer and counter, keeping
CNTVOFF_EL2 set to zero, and emulate accesses to CVAL/TVAL/CTL
and the counter itself, fixing up the timer to account for the
missing offset.
And if you think this is disgusting, you'd probably be right.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-12-17 14:23:19 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-22 13:18:10 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-12-17 14:23:13 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-09-29 17:04:48 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-01-23 13:21:58 -05:00
|
|
|
|
