linux/drivers/md/md.c

7206 lines
184 KiB

tree-wide: convert open calls to remove spaces to skip_spaces() lib function Makes use of skip_spaces() defined in lib/string.c for removing leading spaces from strings all over the tree. It decreases lib.a code size by 47 bytes and reuses the function tree-wide: text data bss dec hex filename 64688 584 592 65864 10148 (TOTALS-BEFORE) 64641 584 592 65817 10119 (TOTALS-AFTER) Also, while at it, if we see (*str && isspace(*str)), we can be sure to remove the first condition (*str) as the second one (isspace(*str)) also evaluates to 0 whenever *str == 0, making it redundant. In other words, "a char equals zero is never a space". Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below, and found occurrences of this pattern on 3 more files: drivers/leds/led-class.c drivers/leds/ledtrig-timer.c drivers/video/output.c @@ expression str; @@ ( // ignore skip_spaces cases while (*str && isspace(*str)) { \(str++;\|++str;\) } | - *str && isspace(*str) ) Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Neil Brown <neilb@suse.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: David Howells <dhowells@redhat.com> Cc: <linux-ext4@vger.kernel.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14 18:01:06 -08:00
md: support barrier requests on all personalities. Previously barriers were only supported on RAID1. This is because other levels requires synchronisation across all devices and so needed a different approach. Here is that approach. When a barrier arrives, we send a zero-length barrier to every active device. When that completes - and if the original request was not empty - we submit the barrier request itself (with the barrier flag cleared) and then submit a fresh load of zero length barriers. The barrier request itself is asynchronous, but any subsequent request will block until the barrier completes. The reason for clearing the barrier flag is that a barrier request is allowed to fail. If we pass a non-empty barrier through a striping raid level it is conceivable that part of it could succeed and part could fail. That would be way too hard to deal with. So if the first run of zero length barriers succeed, we assume all is sufficiently well that we send the request and ignore errors in the second run of barriers. RAID5 needs extra care as write requests may not have been submitted to the underlying devices yet. So we flush the stripe cache before proceeding with the barrier. Note that the second set of zero-length barriers are submitted immediately after the original request is submitted. Thus when a personality finds mddev->barrier to be set during make_request, it should not return from make_request until the corresponding per-device request(s) have been queued. That will be done in later patches. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Andre Noll <maan@systemlinux.org>
2009-12-14 12:49:49 +11:00
md: support barrier requests on all personalities. Previously barriers were only supported on RAID1. This is because other levels requires synchronisation across all devices and so needed a different approach. Here is that approach. When a barrier arrives, we send a zero-length barrier to every active device. When that completes - and if the original request was not empty - we submit the barrier request itself (with the barrier flag cleared) and then submit a fresh load of zero length barriers. The barrier request itself is asynchronous, but any subsequent request will block until the barrier completes. The reason for clearing the barrier flag is that a barrier request is allowed to fail. If we pass a non-empty barrier through a striping raid level it is conceivable that part of it could succeed and part could fail. That would be way too hard to deal with. So if the first run of zero length barriers succeed, we assume all is sufficiently well that we send the request and ignore errors in the second run of barriers. RAID5 needs extra care as write requests may not have been submitted to the underlying devices yet. So we flush the stripe cache before proceeding with the barrier. Note that the second set of zero-length barriers are submitted immediately after the original request is submitted. Thus when a personality finds mddev->barrier to be set during make_request, it should not return from make_request until the corresponding per-device request(s) have been queued. That will be done in later patches. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Andre Noll <maan@systemlinux.org>
2009-12-14 12:49:49 +11:00
md: support barrier requests on all personalities. Previously barriers were only supported on RAID1. This is because other levels requires synchronisation across all devices and so needed a different approach. Here is that approach. When a barrier arrives, we send a zero-length barrier to every active device. When that completes - and if the original request was not empty - we submit the barrier request itself (with the barrier flag cleared) and then submit a fresh load of zero length barriers. The barrier request itself is asynchronous, but any subsequent request will block until the barrier completes. The reason for clearing the barrier flag is that a barrier request is allowed to fail. If we pass a non-empty barrier through a striping raid level it is conceivable that part of it could succeed and part could fail. That would be way too hard to deal with. So if the first run of zero length barriers succeed, we assume all is sufficiently well that we send the request and ignore errors in the second run of barriers. RAID5 needs extra care as write requests may not have been submitted to the underlying devices yet. So we flush the stripe cache before proceeding with the barrier. Note that the second set of zero-length barriers are submitted immediately after the original request is submitted. Thus when a personality finds mddev->barrier to be set during make_request, it should not return from make_request until the corresponding per-device request(s) have been queued. That will be done in later patches. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Andre Noll <maan@systemlinux.org>
2009-12-14 12:49:49 +11:00
md: support barrier requests on all personalities. Previously barriers were only supported on RAID1. This is because other levels requires synchronisation across all devices and so needed a different approach. Here is that approach. When a barrier arrives, we send a zero-length barrier to every active device. When that completes - and if the original request was not empty - we submit the barrier request itself (with the barrier flag cleared) and then submit a fresh load of zero length barriers. The barrier request itself is asynchronous, but any subsequent request will block until the barrier completes. The reason for clearing the barrier flag is that a barrier request is allowed to fail. If we pass a non-empty barrier through a striping raid level it is conceivable that part of it could succeed and part could fail. That would be way too hard to deal with. So if the first run of zero length barriers succeed, we assume all is sufficiently well that we send the request and ignore errors in the second run of barriers. RAID5 needs extra care as write requests may not have been submitted to the underlying devices yet. So we flush the stripe cache before proceeding with the barrier. Note that the second set of zero-length barriers are submitted immediately after the original request is submitted. Thus when a personality finds mddev->barrier to be set during make_request, it should not return from make_request until the corresponding per-device request(s) have been queued. That will be done in later patches. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Andre Noll <maan@systemlinux.org>
2009-12-14 12:49:49 +11:00
md: fix deadlock when stopping arrays Resolve a deadlock when stopping redundant arrays, i.e. ones that require a call to sysfs_remove_group when shutdown. The deadlock is summarized below: Thread1 Thread2 ------- ------- read sysfs attribute stop array take mddev lock sysfs_remove_group sysfs_get_active wait for mddev lock wait for active Sysrq-w: -------- mdmon S 00000017 2212 4163 1 f1982ea8 00000046 2dcf6b85 00000017 c0b23100 f2f83ed0 c0b23100 f2f8413c c0b23100 c0b23100 c0b1fb98 f2f8413c 00000000 f2f8413c c0b23100 f2291ecc 00000002 c0b23100 00000000 00000017 f2f83ed0 f1982eac 00000046 c044d9dd Call Trace: [<c044d9dd>] ? debug_mutex_add_waiter+0x1d/0x58 [<c06ef451>] __mutex_lock_common+0x1d9/0x338 [<c06ef451>] ? __mutex_lock_common+0x1d9/0x338 [<c06ef5e3>] mutex_lock_interruptible_nested+0x33/0x3a [<c0634553>] ? mddev_lock+0x14/0x16 [<c0634553>] mddev_lock+0x14/0x16 [<c0634eda>] md_attr_show+0x2a/0x49 [<c04e9997>] sysfs_read_file+0x93/0xf9 mdadm D 00000017 2812 4177 1 f0401d78 00000046 430456f8 00000017 f0401d58 f0401d20 c0b23100 f2da2c4c c0b23100 c0b23100 c0b1fb98 f2da2c4c 0a10fc36 00000000 c0b23100 f0401d70 00000003 c0b23100 00000000 00000017 f2da29e0 00000001 00000002 00000000 Call Trace: [<c06eed1b>] schedule_timeout+0x1b/0x95 [<c06eed1b>] ? schedule_timeout+0x1b/0x95 [<c06eeb97>] ? wait_for_common+0x34/0xdc [<c044fa8a>] ? trace_hardirqs_on_caller+0x18/0x145 [<c044fbc2>] ? trace_hardirqs_on+0xb/0xd [<c06eec03>] wait_for_common+0xa0/0xdc [<c0428c7c>] ? default_wake_function+0x0/0x12 [<c06eeccc>] wait_for_completion+0x17/0x19 [<c04ea620>] sysfs_addrm_finish+0x19f/0x1d1 [<c04e920e>] sysfs_hash_and_remove+0x42/0x55 [<c04eb4db>] sysfs_remove_group+0x57/0x86 [<c0638086>] do_md_stop+0x13a/0x499 This has been there for a while, but is easier to trigger now that mdmon is closely watching sysfs. Cc: <stable@kernel.org> Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04 00:57:25 -07:00
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
md: support barrier requests on all personalities. Previously barriers were only supported on RAID1. This is because other levels requires synchronisation across all devices and so needed a different approach. Here is that approach. When a barrier arrives, we send a zero-length barrier to every active device. When that completes - and if the original request was not empty - we submit the barrier request itself (with the barrier flag cleared) and then submit a fresh load of zero length barriers. The barrier request itself is asynchronous, but any subsequent request will block until the barrier completes. The reason for clearing the barrier flag is that a barrier request is allowed to fail. If we pass a non-empty barrier through a striping raid level it is conceivable that part of it could succeed and part could fail. That would be way too hard to deal with. So if the first run of zero length barriers succeed, we assume all is sufficiently well that we send the request and ignore errors in the second run of barriers. RAID5 needs extra care as write requests may not have been submitted to the underlying devices yet. So we flush the stripe cache before proceeding with the barrier. Note that the second set of zero-length barriers are submitted immediately after the original request is submitted. Thus when a personality finds mddev->barrier to be set during make_request, it should not return from make_request until the corresponding per-device request(s) have been queued. That will be done in later patches. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Andre Noll <maan@systemlinux.org>
2009-12-14 12:49:49 +11:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
md: need another print_sb for mdp_superblock_1 md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
tree-wide: convert open calls to remove spaces to skip_spaces() lib function Makes use of skip_spaces() defined in lib/string.c for removing leading spaces from strings all over the tree. It decreases lib.a code size by 47 bytes and reuses the function tree-wide: text data bss dec hex filename 64688 584 592 65864 10148 (TOTALS-BEFORE) 64641 584 592 65817 10119 (TOTALS-AFTER) Also, while at it, if we see (*str && isspace(*str)), we can be sure to remove the first condition (*str) as the second one (isspace(*str)) also evaluates to 0 whenever *str == 0, making it redundant. In other words, "a char equals zero is never a space". Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below, and found occurrences of this pattern on 3 more files: drivers/leds/led-class.c drivers/leds/ledtrig-timer.c drivers/video/output.c @@ expression str; @@ ( // ignore skip_spaces cases while (*str && isspace(*str)) { \(str++;\|++str;\) } | - *str && isspace(*str) ) Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Neil Brown <neilb@suse.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: David Howells <dhowells@redhat.com> Cc: <linux-ext4@vger.kernel.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14 18:01:06 -08:00
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
md: fix deadlock when stopping arrays Resolve a deadlock when stopping redundant arrays, i.e. ones that require a call to sysfs_remove_group when shutdown. The deadlock is summarized below: Thread1 Thread2 ------- ------- read sysfs attribute stop array take mddev lock sysfs_remove_group sysfs_get_active wait for mddev lock wait for active Sysrq-w: -------- mdmon S 00000017 2212 4163 1 f1982ea8 00000046 2dcf6b85 00000017 c0b23100 f2f83ed0 c0b23100 f2f8413c c0b23100 c0b23100 c0b1fb98 f2f8413c 00000000 f2f8413c c0b23100 f2291ecc 00000002 c0b23100 00000000 00000017 f2f83ed0 f1982eac 00000046 c044d9dd Call Trace: [<c044d9dd>] ? debug_mutex_add_waiter+0x1d/0x58 [<c06ef451>] __mutex_lock_common+0x1d9/0x338 [<c06ef451>] ? __mutex_lock_common+0x1d9/0x338 [<c06ef5e3>] mutex_lock_interruptible_nested+0x33/0x3a [<c0634553>] ? mddev_lock+0x14/0x16 [<c0634553>] mddev_lock+0x14/0x16 [<c0634eda>] md_attr_show+0x2a/0x49 [<c04e9997>] sysfs_read_file+0x93/0xf9 mdadm D 00000017 2812 4177 1 f0401d78 00000046 430456f8 00000017 f0401d58 f0401d20 c0b23100 f2da2c4c c0b23100 c0b23100 c0b1fb98 f2da2c4c 0a10fc36 00000000 c0b23100 f0401d70 00000003 c0b23100 00000000 00000017 f2da29e0 00000001 00000002 00000000 Call Trace: [<c06eed1b>] schedule_timeout+0x1b/0x95 [<c06eed1b>] ? schedule_timeout+0x1b/0x95 [<c06eeb97>] ? wait_for_common+0x34/0xdc [<c044fa8a>] ? trace_hardirqs_on_caller+0x18/0x145 [<c044fbc2>] ? trace_hardirqs_on+0xb/0xd [<c06eec03>] wait_for_common+0xa0/0xdc [<c0428c7c>] ? default_wake_function+0x0/0x12 [<c06eeccc>] wait_for_completion+0x17/0x19 [<c04ea620>] sysfs_addrm_finish+0x19f/0x1d1 [<c04e920e>] sysfs_hash_and_remove+0x42/0x55 [<c04eb4db>] sysfs_remove_group+0x57/0x86 [<c0638086>] do_md_stop+0x13a/0x499 This has been there for a while, but is easier to trigger now that mdmon is closely watching sysfs. Cc: <stable@kernel.org> Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04 00:57:25 -07:00
md: fix some lockdep issues between md and sysfs. ====== This fix is related to http://bugzilla.kernel.org/show_bug.cgi?id=15142 but does not address that exact issue. ====== sysfs does like attributes being removed while they are being accessed (i.e. read or written) and waits for the access to complete. As accessing some md attributes takes the same lock that is held while removing those attributes a deadlock can occur. This patch addresses 3 issues in md that could lead to this deadlock. Two relate to calling flush_scheduled_work while the lock is held. This is probably a bad idea in general and as we use schedule_work to delete various sysfs objects it is particularly bad. In one case flush_scheduled_work is called from md_alloc (called by md_probe) called from do_md_run which holds the lock. This call is only present to ensure that ->gendisk is set. However we can be sure that gendisk is always set (though possibly we couldn't when that code was originally written. This is because do_md_run is called in three different contexts: 1/ from md_ioctl. This requires that md_open has succeeded, and it fails if ->gendisk is not set. 2/ from writing a sysfs attribute. This can only happen if the mddev has been registered in sysfs which happens in md_alloc after ->gendisk has been set. 3/ from autorun_array which is only called by autorun_devices, which checks for ->gendisk to be set before calling autorun_array. So the call to md_probe in do_md_run can be removed, and the check on ->gendisk can also go. In the other case flush_scheduled_work is being called in do_md_stop, purportedly to wait for all md_delayed_delete calls (which delete the component rdevs) to complete. However there really isn't any need to wait for them - they have already been disconnected in all important ways. The third issue is that raid5->stop() removes some attribute names while the lock is held. There is already some infrastructure in place to delay attribute removal until after the lock is released (using schedule_work). So extend that infrastructure to remove the raid5_attrs_group. This does not address all lockdep issues related to the sysfs "s_active" lock. The rest can be address by splitting that lockdep context between symlinks and non-symlinks which hopefully will happen. Signed-off-by: NeilBrown <neilb@suse.de>
2010-02-09 16:34:14 +11:00
md: fix deadlock when stopping arrays Resolve a deadlock when stopping redundant arrays, i.e. ones that require a call to sysfs_remove_group when shutdown. The deadlock is summarized below: Thread1 Thread2 ------- ------- read sysfs attribute stop array take mddev lock sysfs_remove_group sysfs_get_active wait for mddev lock wait for active Sysrq-w: -------- mdmon S 00000017 2212 4163 1 f1982ea8 00000046 2dcf6b85 00000017 c0b23100 f2f83ed0 c0b23100 f2f8413c c0b23100 c0b23100 c0b1fb98 f2f8413c 00000000 f2f8413c c0b23100 f2291ecc 00000002 c0b23100 00000000 00000017 f2f83ed0 f1982eac 00000046 c044d9dd Call Trace: [<c044d9dd>] ? debug_mutex_add_waiter+0x1d/0x58 [<c06ef451>] __mutex_lock_common+0x1d9/0x338 [<c06ef451>] ? __mutex_lock_common+0x1d9/0x338 [<c06ef5e3>] mutex_lock_interruptible_nested+0x33/0x3a [<c0634553>] ? mddev_lock+0x14/0x16 [<c0634553>] mddev_lock+0x14/0x16 [<c0634eda>] md_attr_show+0x2a/0x49 [<c04e9997>] sysfs_read_file+0x93/0xf9 mdadm D 00000017 2812 4177 1 f0401d78 00000046 430456f8 00000017 f0401d58 f0401d20 c0b23100 f2da2c4c c0b23100 c0b23100 c0b1fb98 f2da2c4c 0a10fc36 00000000 c0b23100 f0401d70 00000003 c0b23100 00000000 00000017 f2da29e0 00000001 00000002 00000000 Call Trace: [<c06eed1b>] schedule_timeout+0x1b/0x95 [<c06eed1b>] ? schedule_timeout+0x1b/0x95 [<c06eeb97>] ? wait_for_common+0x34/0xdc [<c044fa8a>] ? trace_hardirqs_on_caller+0x18/0x145 [<c044fbc2>] ? trace_hardirqs_on+0xb/0xd [<c06eec03>] wait_for_common+0xa0/0xdc [<c0428c7c>] ? default_wake_function+0x0/0x12 [<c06eeccc>] wait_for_completion+0x17/0x19 [<c04ea620>] sysfs_addrm_finish+0x19f/0x1d1 [<c04e920e>] sysfs_hash_and_remove+0x42/0x55 [<c04eb4db>] sysfs_remove_group+0x57/0x86 [<c0638086>] do_md_stop+0x13a/0x499 This has been there for a while, but is easier to trigger now that mdmon is closely watching sysfs. Cc: <stable@kernel.org> Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04 00:57:25 -07:00
md: fix some lockdep issues between md and sysfs. ====== This fix is related to http://bugzilla.kernel.org/show_bug.cgi?id=15142 but does not address that exact issue. ====== sysfs does like attributes being removed while they are being accessed (i.e. read or written) and waits for the access to complete. As accessing some md attributes takes the same lock that is held while removing those attributes a deadlock can occur. This patch addresses 3 issues in md that could lead to this deadlock. Two relate to calling flush_scheduled_work while the lock is held. This is probably a bad idea in general and as we use schedule_work to delete various sysfs objects it is particularly bad. In one case flush_scheduled_work is called from md_alloc (called by md_probe) called from do_md_run which holds the lock. This call is only present to ensure that ->gendisk is set. However we can be sure that gendisk is always set (though possibly we couldn't when that code was originally written. This is because do_md_run is called in three different contexts: 1/ from md_ioctl. This requires that md_open has succeeded, and it fails if ->gendisk is not set. 2/ from writing a sysfs attribute. This can only happen if the mddev has been registered in sysfs which happens in md_alloc after ->gendisk has been set. 3/ from autorun_array which is only called by autorun_devices, which checks for ->gendisk to be set before calling autorun_array. So the call to md_probe in do_md_run can be removed, and the check on ->gendisk can also go. In the other case flush_scheduled_work is being called in do_md_stop, purportedly to wait for all md_delayed_delete calls (which delete the component rdevs) to complete. However there really isn't any need to wait for them - they have already been disconnected in all important ways. The third issue is that raid5->stop() removes some attribute names while the lock is held. There is already some infrastructure in place to delay attribute removal until after the lock is released (using schedule_work). So extend that infrastructure to remove the raid5_attrs_group. This does not address all lockdep issues related to the sysfs "s_active" lock. The rest can be address by splitting that lockdep context between symlinks and non-symlinks which hopefully will happen. Signed-off-by: NeilBrown <neilb@suse.de>
2010-02-09 16:34:14 +11:00
md: fix deadlock when stopping arrays Resolve a deadlock when stopping redundant arrays, i.e. ones that require a call to sysfs_remove_group when shutdown. The deadlock is summarized below: Thread1 Thread2 ------- ------- read sysfs attribute stop array take mddev lock sysfs_remove_group sysfs_get_active wait for mddev lock wait for active Sysrq-w: -------- mdmon S 00000017 2212 4163 1 f1982ea8 00000046 2dcf6b85 00000017 c0b23100 f2f83ed0 c0b23100 f2f8413c c0b23100 c0b23100 c0b1fb98 f2f8413c 00000000 f2f8413c c0b23100 f2291ecc 00000002 c0b23100 00000000 00000017 f2f83ed0 f1982eac 00000046 c044d9dd Call Trace: [<c044d9dd>] ? debug_mutex_add_waiter+0x1d/0x58 [<c06ef451>] __mutex_lock_common+0x1d9/0x338 [<c06ef451>] ? __mutex_lock_common+0x1d9/0x338 [<c06ef5e3>] mutex_lock_interruptible_nested+0x33/0x3a [<c0634553>] ? mddev_lock+0x14/0x16 [<c0634553>] mddev_lock+0x14/0x16 [<c0634eda>] md_attr_show+0x2a/0x49 [<c04e9997>] sysfs_read_file+0x93/0xf9 mdadm D 00000017 2812 4177 1 f0401d78 00000046 430456f8 00000017 f0401d58 f0401d20 c0b23100 f2da2c4c c0b23100 c0b23100 c0b1fb98 f2da2c4c 0a10fc36 00000000 c0b23100 f0401d70 00000003 c0b23100 00000000 00000017 f2da29e0 00000001 00000002 00000000 Call Trace: [<c06eed1b>] schedule_timeout+0x1b/0x95 [<c06eed1b>] ? schedule_timeout+0x1b/0x95 [<c06eeb97>] ? wait_for_common+0x34/0xdc [<c044fa8a>] ? trace_hardirqs_on_caller+0x18/0x145 [<c044fbc2>] ? trace_hardirqs_on+0xb/0xd [<c06eec03>] wait_for_common+0xa0/0xdc [<c0428c7c>] ? default_wake_function+0x0/0x12 [<c06eeccc>] wait_for_completion+0x17/0x19 [<c04ea620>] sysfs_addrm_finish+0x19f/0x1d1 [<c04e920e>] sysfs_hash_and_remove+0x42/0x55 [<c04eb4db>] sysfs_remove_group+0x57/0x86 [<c0638086>] do_md_stop+0x13a/0x499 This has been there for a while, but is easier to trigger now that mdmon is closely watching sysfs. Cc: <stable@kernel.org> Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04 00:57:25 -07:00
md: fix deadlock when stopping arrays Resolve a deadlock when stopping redundant arrays, i.e. ones that require a call to sysfs_remove_group when shutdown. The deadlock is summarized below: Thread1 Thread2 ------- ------- read sysfs attribute stop array take mddev lock sysfs_remove_group sysfs_get_active wait for mddev lock wait for active Sysrq-w: -------- mdmon S 00000017 2212 4163 1 f1982ea8 00000046 2dcf6b85 00000017 c0b23100 f2f83ed0 c0b23100 f2f8413c c0b23100 c0b23100 c0b1fb98 f2f8413c 00000000 f2f8413c c0b23100 f2291ecc 00000002 c0b23100 00000000 00000017 f2f83ed0 f1982eac 00000046 c044d9dd Call Trace: [<c044d9dd>] ? debug_mutex_add_waiter+0x1d/0x58 [<c06ef451>] __mutex_lock_common+0x1d9/0x338 [<c06ef451>] ? __mutex_lock_common+0x1d9/0x338 [<c06ef5e3>] mutex_lock_interruptible_nested+0x33/0x3a [<c0634553>] ? mddev_lock+0x14/0x16 [<c0634553>] mddev_lock+0x14/0x16 [<c0634eda>] md_attr_show+0x2a/0x49 [<c04e9997>] sysfs_read_file+0x93/0xf9 mdadm D 00000017 2812 4177 1 f0401d78 00000046 430456f8 00000017 f0401d58 f0401d20 c0b23100 f2da2c4c c0b23100 c0b23100 c0b1fb98 f2da2c4c 0a10fc36 00000000 c0b23100 f0401d70 00000003 c0b23100 00000000 00000017 f2da29e0 00000001 00000002 00000000 Call Trace: [<c06eed1b>] schedule_timeout+0x1b/0x95 [<c06eed1b>] ? schedule_timeout+0x1b/0x95 [<c06eeb97>] ? wait_for_common+0x34/0xdc [<c044fa8a>] ? trace_hardirqs_on_caller+0x18/0x145 [<c044fbc2>] ? trace_hardirqs_on+0xb/0xd [<c06eec03>] wait_for_common+0xa0/0xdc [<c0428c7c>] ? default_wake_function+0x0/0x12 [<c06eeccc>] wait_for_completion+0x17/0x19 [<c04ea620>] sysfs_addrm_finish+0x19f/0x1d1 [<c04e920e>] sysfs_hash_and_remove+0x42/0x55 [<c04eb4db>] sysfs_remove_group+0x57/0x86 [<c0638086>] do_md_stop+0x13a/0x499 This has been there for a while, but is easier to trigger now that mdmon is closely watching sysfs. Cc: <stable@kernel.org> Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04 00:57:25 -07:00
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
md: fix some lockdep issues between md and sysfs. ====== This fix is related to http://bugzilla.kernel.org/show_bug.cgi?id=15142 but does not address that exact issue. ====== sysfs does like attributes being removed while they are being accessed (i.e. read or written) and waits for the access to complete. As accessing some md attributes takes the same lock that is held while removing those attributes a deadlock can occur. This patch addresses 3 issues in md that could lead to this deadlock. Two relate to calling flush_scheduled_work while the lock is held. This is probably a bad idea in general and as we use schedule_work to delete various sysfs objects it is particularly bad. In one case flush_scheduled_work is called from md_alloc (called by md_probe) called from do_md_run which holds the lock. This call is only present to ensure that ->gendisk is set. However we can be sure that gendisk is always set (though possibly we couldn't when that code was originally written. This is because do_md_run is called in three different contexts: 1/ from md_ioctl. This requires that md_open has succeeded, and it fails if ->gendisk is not set. 2/ from writing a sysfs attribute. This can only happen if the mddev has been registered in sysfs which happens in md_alloc after ->gendisk has been set. 3/ from autorun_array which is only called by autorun_devices, which checks for ->gendisk to be set before calling autorun_array. So the call to md_probe in do_md_run can be removed, and the check on ->gendisk can also go. In the other case flush_scheduled_work is being called in do_md_stop, purportedly to wait for all md_delayed_delete calls (which delete the component rdevs) to complete. However there really isn't any need to wait for them - they have already been disconnected in all important ways. The third issue is that raid5->stop() removes some attribute names while the lock is held. There is already some infrastructure in place to delay attribute removal until after the lock is released (using schedule_work). So extend that infrastructure to remove the raid5_attrs_group. This does not address all lockdep issues related to the sysfs "s_active" lock. The rest can be address by splitting that lockdep context between symlinks and non-symlinks which hopefully will happen. Signed-off-by: NeilBrown <neilb@suse.de>
2010-02-09 16:34:14 +11:00
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 13:04:39 -07:00
2005-11-08 21:39:34 -08:00
2005-11-08 21:39:34 -08:00
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 13:04:39 -07:00
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 13:04:39 -07:00
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 13:04:39 -07:00
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 13:04:39 -07:00
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 13:04:39 -07:00
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 13:04:39 -07:00
md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 13:04:39 -07:00
[PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 00:34:09 -08:00
md: make devices disappear when they are no longer needed. Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:10 +11:00