linux/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c

832 lines
24 KiB

drm/amdkfd: fix mes set shader debugger process management MES provides the driver a call to explicitly flush stale process memory within the MES to avoid a race condition that results in a fatal memory violation. When SET_SHADER_DEBUGGER is called, the driver passes a memory address that represents a process context address MES uses to keep track of future per-process calls. Normally, MES will purge its process context list when the last queue has been removed. The driver, however, can call SET_SHADER_DEBUGGER regardless of whether a queue has been added or not. If SET_SHADER_DEBUGGER has been called with no queues as the last call prior to process termination, the passed process context address will still reside within MES. On a new process call to SET_SHADER_DEBUGGER, the driver may end up passing an identical process context address value (based on per-process gpu memory address) to MES but is now pointing to a new allocated buffer object during KFD process creation. Since the MES is unaware of this, access of the passed address points to the stale object within MES and triggers a fatal memory violation. The solution is for KFD to explicitly flush the process context address from MES on process termination. Note that the flush call and the MES debugger calls use the same MES interface but are separated as KFD calls to avoid conflicting with each other. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Tested-by: Alice Wong <shiwei.wong@amd.com> Reviewed-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-05 12:22:07 -05:00
drm/amdkfd: fix mes set shader debugger process management MES provides the driver a call to explicitly flush stale process memory within the MES to avoid a race condition that results in a fatal memory violation. When SET_SHADER_DEBUGGER is called, the driver passes a memory address that represents a process context address MES uses to keep track of future per-process calls. Normally, MES will purge its process context list when the last queue has been removed. The driver, however, can call SET_SHADER_DEBUGGER regardless of whether a queue has been added or not. If SET_SHADER_DEBUGGER has been called with no queues as the last call prior to process termination, the passed process context address will still reside within MES. On a new process call to SET_SHADER_DEBUGGER, the driver may end up passing an identical process context address value (based on per-process gpu memory address) to MES but is now pointing to a new allocated buffer object during KFD process creation. Since the MES is unaware of this, access of the passed address points to the stale object within MES and triggers a fatal memory violation. The solution is for KFD to explicitly flush the process context address from MES on process termination. Note that the flush call and the MES debugger calls use the same MES interface but are separated as KFD calls to avoid conflicting with each other. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Tested-by: Alice Wong <shiwei.wong@amd.com> Reviewed-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-05 12:22:07 -05:00
drm/amdkfd: fix mes set shader debugger process management MES provides the driver a call to explicitly flush stale process memory within the MES to avoid a race condition that results in a fatal memory violation. When SET_SHADER_DEBUGGER is called, the driver passes a memory address that represents a process context address MES uses to keep track of future per-process calls. Normally, MES will purge its process context list when the last queue has been removed. The driver, however, can call SET_SHADER_DEBUGGER regardless of whether a queue has been added or not. If SET_SHADER_DEBUGGER has been called with no queues as the last call prior to process termination, the passed process context address will still reside within MES. On a new process call to SET_SHADER_DEBUGGER, the driver may end up passing an identical process context address value (based on per-process gpu memory address) to MES but is now pointing to a new allocated buffer object during KFD process creation. Since the MES is unaware of this, access of the passed address points to the stale object within MES and triggers a fatal memory violation. The solution is for KFD to explicitly flush the process context address from MES on process termination. Note that the flush call and the MES debugger calls use the same MES interface but are separated as KFD calls to avoid conflicting with each other. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Tested-by: Alice Wong <shiwei.wong@amd.com> Reviewed-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-05 12:22:07 -05:00
drm/amdkfd: fix mes set shader debugger process management MES provides the driver a call to explicitly flush stale process memory within the MES to avoid a race condition that results in a fatal memory violation. When SET_SHADER_DEBUGGER is called, the driver passes a memory address that represents a process context address MES uses to keep track of future per-process calls. Normally, MES will purge its process context list when the last queue has been removed. The driver, however, can call SET_SHADER_DEBUGGER regardless of whether a queue has been added or not. If SET_SHADER_DEBUGGER has been called with no queues as the last call prior to process termination, the passed process context address will still reside within MES. On a new process call to SET_SHADER_DEBUGGER, the driver may end up passing an identical process context address value (based on per-process gpu memory address) to MES but is now pointing to a new allocated buffer object during KFD process creation. Since the MES is unaware of this, access of the passed address points to the stale object within MES and triggers a fatal memory violation. The solution is for KFD to explicitly flush the process context address from MES on process termination. Note that the flush call and the MES debugger calls use the same MES interface but are separated as KFD calls to avoid conflicting with each other. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Tested-by: Alice Wong <shiwei.wong@amd.com> Reviewed-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-05 12:22:07 -05:00
drm/amdkfd: fix mes set shader debugger process management MES provides the driver a call to explicitly flush stale process memory within the MES to avoid a race condition that results in a fatal memory violation. When SET_SHADER_DEBUGGER is called, the driver passes a memory address that represents a process context address MES uses to keep track of future per-process calls. Normally, MES will purge its process context list when the last queue has been removed. The driver, however, can call SET_SHADER_DEBUGGER regardless of whether a queue has been added or not. If SET_SHADER_DEBUGGER has been called with no queues as the last call prior to process termination, the passed process context address will still reside within MES. On a new process call to SET_SHADER_DEBUGGER, the driver may end up passing an identical process context address value (based on per-process gpu memory address) to MES but is now pointing to a new allocated buffer object during KFD process creation. Since the MES is unaware of this, access of the passed address points to the stale object within MES and triggers a fatal memory violation. The solution is for KFD to explicitly flush the process context address from MES on process termination. Note that the flush call and the MES debugger calls use the same MES interface but are separated as KFD calls to avoid conflicting with each other. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Tested-by: Alice Wong <shiwei.wong@amd.com> Reviewed-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-05 12:22:07 -05:00
drm/amdkfd: fix mes set shader debugger process management MES provides the driver a call to explicitly flush stale process memory within the MES to avoid a race condition that results in a fatal memory violation. When SET_SHADER_DEBUGGER is called, the driver passes a memory address that represents a process context address MES uses to keep track of future per-process calls. Normally, MES will purge its process context list when the last queue has been removed. The driver, however, can call SET_SHADER_DEBUGGER regardless of whether a queue has been added or not. If SET_SHADER_DEBUGGER has been called with no queues as the last call prior to process termination, the passed process context address will still reside within MES. On a new process call to SET_SHADER_DEBUGGER, the driver may end up passing an identical process context address value (based on per-process gpu memory address) to MES but is now pointing to a new allocated buffer object during KFD process creation. Since the MES is unaware of this, access of the passed address points to the stale object within MES and triggers a fatal memory violation. The solution is for KFD to explicitly flush the process context address from MES on process termination. Note that the flush call and the MES debugger calls use the same MES interface but are separated as KFD calls to avoid conflicting with each other. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Tested-by: Alice Wong <shiwei.wong@amd.com> Reviewed-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-05 12:22:07 -05:00
drm/amdgpu: Fix 'fw_name' buffer size to prevent truncations in amdgpu_mes_init_microcode The snprintf function is used to write a formatted string into fw_name. The format of the string is "amdgpu/%s_mes%s.bin", where %s is replaced by the string in ucode_prefix and the second %s is replaced by either "_2" or "1" depending on the condition pipe == AMDGPU_MES_SCHED_PIPE. The length of the string "amdgpu/%s_mes%s.bin" is 16 characters plus the length of ucode_prefix and the length of the string "_2" or "1". The size of ucode_prefix is 30, so the maximum length of ucode_prefix is 29 characters (since one character is needed for the null terminator). Therefore, the maximum possible length of the string written into fw_name is 16 + 29 + 2 = 47 characters. The size of fw_name is 40, so if the length of the string written into fw_name is more than 39 characters (since one character is needed for the null terminator), it will be truncated by the snprintf function, and thus warnings will be seen. By increasing the size of fw_name to 50, we ensure that fw_name is large enough to hold the maximum possible length of the string, so the snprintf function will not truncate the output. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c: In function ‘amdgpu_mes_init_microcode’: drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:66: warning: ‘%s’ directive output may be truncated writing up to 1 bytes into a region of size between 0 and 29 [-Wformat-truncation=] 1482 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin", | ^~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:17: note: ‘snprintf’ output between 16 and 46 bytes into a destination of size 40 1482 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1483 | ucode_prefix, | ~~~~~~~~~~~~~ 1484 | pipe == AMDGPU_MES_SCHED_PIPE ? "" : "1"); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 1 byte into a region of size between 0 and 29 [-Wformat-truncation=] 1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin", | ^~ 1478 | ucode_prefix, 1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1"); | ~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 17 and 46 bytes into a destination of size 40 1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1478 | ucode_prefix, | ~~~~~~~~~~~~~ 1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1"); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 2 bytes into a region of size between 0 and 29 [-Wformat-truncation=] 1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin", | ^~ 1478 | ucode_prefix, 1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1"); | ~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 18 and 47 bytes into a destination of size 40 1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1478 | ucode_prefix, | ~~~~~~~~~~~~~ 1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1"); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:62: warning: ‘_mes.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=] 1489 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin", | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40 1489 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1490 | ucode_prefix); | ~~~~~~~~~~~~~ Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-21 11:05:55 +05:30