linux/drivers/gpu/drm/drm_bridge.c

1688 lines
54 KiB

drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: Include <linux/export.h> Fix compile-time warnings drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/analogix/analogix_dp_core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/aux-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/aux-hpd-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/imx/imx-legacy-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/panel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/samsung-dsim.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/synopsys/dw-hdmi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi2.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/drm_bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/gpu/drm/drm_bridge_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-4-tzimmermann@suse.de
2025-06-12 14:09:57 +02:00
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: Add a drm_bridge_state object One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. v10: * Add changelog to the commit message v9: * Clarify the fact that the bridge->atomic_reset() and {connector,plane,crtc,...}->reset() semantics are different * Move the drm_atomic_private_obj_init() call back to drm_bridge_attach() * Check the presence of ->atomic_duplicate_state instead of ->atomic_reset in drm_atomic_add_encoder_bridges() * Fix copy&paste errors in the atomic bridge state helpers doc * Add A-b/R-b tags v8: * Move bridge state helpers out of the CONFIG_DEBUGFS section v7: * Move helpers, struct-defs, ... to atomic helper files to avoid the drm -> drm_kms_helper -> drm circular dep * Stop providing default implementation for atomic state reset, duplicate and destroy hooks (has to do with the helper/core split) * Drop all R-b/T-b as helpers have now be moved to other places v6: * Made helpers private, removed doc and moved them to satisfy dependencies * Renamed helpers to _default_ v5: * Re-introduced the helpers from v4 v4: * Fix the doc * Kill default helpers (inlined) * Fix drm_atomic_get_bridge_state() to check for an ERR_PTR() * Add Neil's R-b v3: * No changes v2: * Use drm_for_each_bridge_in_chain() * Rename helpers to be more consistent with the rest of the DRM API * Improve/fix the doc Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-2-boris.brezillon@collabora.com
2020-01-28 14:55:03 +01:00
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm: Add helper to create a connector for a chain of bridges Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector needs to be moved to the display controller driver. To avoid code duplication in display controller drivers, add a new helper to create and manage a DRM connector backed by a chain of bridges. All connector operations are delegating to the appropriate bridge in the chain. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-21-laurent.pinchart@ideasonboard.com
2020-02-26 13:24:40 +02:00
drm/bridge: add list of removed refcounted bridges Between drm_bridge_add() and drm_bridge_remove() bridges are registered to the DRM core via the global bridge_list and visible in /sys/kernel/debug/dri/bridges. However between drm_bridge_remove() and the last drm_bridge_put() memory is still allocated even though the bridge is not registered, i.e. not in bridges_list, and also not visible in debugfs. This prevents debugging refcounted bridges lifetime, especially leaks due to a missing drm_bridge_put(). In order to allow debugfs to also show the removed bridges, move such bridges into a new ad-hoc list until they are eventually freed. Note this requires adding INIT_LIST_HEAD(&bridge->list) in the bridge initialization code. The lack of such init was not exposing any bug so far, but it would with the new code, for example when a bridge is allocated and then freed without calling drm_bridge_add(), which is common on probe errors. drm_bridge_add() needs special care for bridges being added after having been previously added and then removed. This happens for example for many non-DCS DSI host bridge drivers like samsung-dsim which drm_bridge_add/remove() themselves every time the DSI device does a DSI attaches/detach. When the DSI device is hot-pluggable this happens multiple times in the lifetime of the DSI host bridge. On every attach after the first one, drm_bridge_add() finds bridge->list in the removed list, not at the initialized state as drm_bridge_add() currently expects. Add a list_del_init() to remove the bridge from the lingering list and bring bridge->list back to the initialized state. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250915-drm-bridge-debugfs-removed-v9-1-6e5c0aff5de9@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-09-15 12:12:46 +02:00
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: add list of removed refcounted bridges Between drm_bridge_add() and drm_bridge_remove() bridges are registered to the DRM core via the global bridge_list and visible in /sys/kernel/debug/dri/bridges. However between drm_bridge_remove() and the last drm_bridge_put() memory is still allocated even though the bridge is not registered, i.e. not in bridges_list, and also not visible in debugfs. This prevents debugging refcounted bridges lifetime, especially leaks due to a missing drm_bridge_put(). In order to allow debugfs to also show the removed bridges, move such bridges into a new ad-hoc list until they are eventually freed. Note this requires adding INIT_LIST_HEAD(&bridge->list) in the bridge initialization code. The lack of such init was not exposing any bug so far, but it would with the new code, for example when a bridge is allocated and then freed without calling drm_bridge_add(), which is common on probe errors. drm_bridge_add() needs special care for bridges being added after having been previously added and then removed. This happens for example for many non-DCS DSI host bridge drivers like samsung-dsim which drm_bridge_add/remove() themselves every time the DSI device does a DSI attaches/detach. When the DSI device is hot-pluggable this happens multiple times in the lifetime of the DSI host bridge. On every attach after the first one, drm_bridge_add() finds bridge->list in the removed list, not at the initialized state as drm_bridge_add() currently expects. Add a list_del_init() to remove the bridge from the lingering list and bring bridge->list back to the initialized state. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250915-drm-bridge-debugfs-removed-v9-1-6e5c0aff5de9@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-09-15 12:12:46 +02:00
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: add list of removed refcounted bridges Between drm_bridge_add() and drm_bridge_remove() bridges are registered to the DRM core via the global bridge_list and visible in /sys/kernel/debug/dri/bridges. However between drm_bridge_remove() and the last drm_bridge_put() memory is still allocated even though the bridge is not registered, i.e. not in bridges_list, and also not visible in debugfs. This prevents debugging refcounted bridges lifetime, especially leaks due to a missing drm_bridge_put(). In order to allow debugfs to also show the removed bridges, move such bridges into a new ad-hoc list until they are eventually freed. Note this requires adding INIT_LIST_HEAD(&bridge->list) in the bridge initialization code. The lack of such init was not exposing any bug so far, but it would with the new code, for example when a bridge is allocated and then freed without calling drm_bridge_add(), which is common on probe errors. drm_bridge_add() needs special care for bridges being added after having been previously added and then removed. This happens for example for many non-DCS DSI host bridge drivers like samsung-dsim which drm_bridge_add/remove() themselves every time the DSI device does a DSI attaches/detach. When the DSI device is hot-pluggable this happens multiple times in the lifetime of the DSI host bridge. On every attach after the first one, drm_bridge_add() finds bridge->list in the removed list, not at the initialized state as drm_bridge_add() currently expects. Add a list_del_init() to remove the bridge from the lingering list and bring bridge->list back to the initialized state. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250915-drm-bridge-debugfs-removed-v9-1-6e5c0aff5de9@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-09-15 12:12:46 +02:00
drm/bridge: add list of removed refcounted bridges Between drm_bridge_add() and drm_bridge_remove() bridges are registered to the DRM core via the global bridge_list and visible in /sys/kernel/debug/dri/bridges. However between drm_bridge_remove() and the last drm_bridge_put() memory is still allocated even though the bridge is not registered, i.e. not in bridges_list, and also not visible in debugfs. This prevents debugging refcounted bridges lifetime, especially leaks due to a missing drm_bridge_put(). In order to allow debugfs to also show the removed bridges, move such bridges into a new ad-hoc list until they are eventually freed. Note this requires adding INIT_LIST_HEAD(&bridge->list) in the bridge initialization code. The lack of such init was not exposing any bug so far, but it would with the new code, for example when a bridge is allocated and then freed without calling drm_bridge_add(), which is common on probe errors. drm_bridge_add() needs special care for bridges being added after having been previously added and then removed. This happens for example for many non-DCS DSI host bridge drivers like samsung-dsim which drm_bridge_add/remove() themselves every time the DSI device does a DSI attaches/detach. When the DSI device is hot-pluggable this happens multiple times in the lifetime of the DSI host bridge. On every attach after the first one, drm_bridge_add() finds bridge->list in the removed list, not at the initialized state as drm_bridge_add() currently expects. Add a list_del_init() to remove the bridge from the lingering list and bring bridge->list back to the initialized state. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250915-drm-bridge-debugfs-removed-v9-1-6e5c0aff5de9@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-09-15 12:12:46 +02:00
drm/bridge: add next_bridge pointer to struct drm_bridge Many bridge drivers store a next_bridge pointer in their private data and use it for attach and sometimes other purposes. This is going to be risky when bridge hot-unplug is used. Considering this example scenario: 1. pipeline: encoder --> bridge A --> bridge B --> bridge C 2. encoder takes a reference to bridge B 3. bridge B takes a next_bridge reference to bridge C 4. encoder calls (bridge B)->b_foo(), which in turns references next_bridge, e.g.: b_foo() { bar(b->next_bridge); } If bridges B and C are removed, bridge C can be freed but B is still allocated because the encoder holds a reference to B. So when step 4 happens, 'b->next-bridge' would be a use-after-free. Calling drm_bridge_put() in the B bridge .remove function does not solve the problem as it leaves a (potentially long) risk window between B removal and the final deallocation of B. A safe moment to put the B reference is in __drm_bridge_free(), when the last reference has been put. This can be done by drivers in the .destroy func. However to avoid the need for so many drivers to implement a .destroy func, just offer a next_bridge pointer to all bridges that is automatically put it in __drm_bridge_free(), exactly when the .destroy func is called. Suggested-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/all/20251201-thick-jasmine-oarfish-1eceb0@houat/ Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patch.msgid.link/20251216-drm-bridge-alloc-getput-drm_of_find_bridge-v3-6-b5165fab8058@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-12-16 18:58:39 +01:00
drm/bridge: add drm_bridge_clear_and_put() Drivers having a struct drm_bridge pointer pointing to a bridge in many cases hold that reference until the owning device is removed. In those cases the reference to the bridge can be put in the .remove callback (possibly using devm actions) or in the .destroy func (possibly with the help of struct drm_bridge::next_bridge). At those moments the driver should not be operating anymore and won't dereference the bridge pointer after it is put. However there are cases when drivers need to stop holding a reference to a bridge even when their device is not being removed. This is the case for bridge hot-unplug, when a bridge is removed but the previous entity (bridge or encoder) is staying. In such case the "previous entity" needs to put it but cannot do it via devm or .destroy, because it is not being removed. The easy way to dispose of such pointer is: drm_bridge_put(my_priv->some_bridge); my_priv->some_bridge = NULL; However this is risky because there is a time window between the two lines where the reference is put, and thus the bridge could be deallocated, but the pointer is still assigned. If other functions of the same driver were invoked concurrently they might dereference my_priv->some_bridge during that window, resulting in use-after-free. A correct solution is to clear the pointer before putting the reference, but that needs a temporary variable: struct drm_bridge *temp = my_priv->some_bridge; my_priv->some_bridge = NULL; drm_bridge_put(temp); This solution is however annoying to write, so the incorrect version might still sneak in. Add a simple, easy to use function to put a bridge after setting its pointer to NULL in the correct way. Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patch.msgid.link/20260310-drm-bridge-atomic-vs-remove-clear_and_put-v2-1-51fe222f3cf0@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2026-03-10 13:13:23 +01:00
drm/bridge: add drm_bridge_clear_and_put() Drivers having a struct drm_bridge pointer pointing to a bridge in many cases hold that reference until the owning device is removed. In those cases the reference to the bridge can be put in the .remove callback (possibly using devm actions) or in the .destroy func (possibly with the help of struct drm_bridge::next_bridge). At those moments the driver should not be operating anymore and won't dereference the bridge pointer after it is put. However there are cases when drivers need to stop holding a reference to a bridge even when their device is not being removed. This is the case for bridge hot-unplug, when a bridge is removed but the previous entity (bridge or encoder) is staying. In such case the "previous entity" needs to put it but cannot do it via devm or .destroy, because it is not being removed. The easy way to dispose of such pointer is: drm_bridge_put(my_priv->some_bridge); my_priv->some_bridge = NULL; However this is risky because there is a time window between the two lines where the reference is put, and thus the bridge could be deallocated, but the pointer is still assigned. If other functions of the same driver were invoked concurrently they might dereference my_priv->some_bridge during that window, resulting in use-after-free. A correct solution is to clear the pointer before putting the reference, but that needs a temporary variable: struct drm_bridge *temp = my_priv->some_bridge; my_priv->some_bridge = NULL; drm_bridge_put(temp); This solution is however annoying to write, so the incorrect version might still sneak in. Add a simple, easy to use function to put a bridge after setting its pointer to NULL in the correct way. Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patch.msgid.link/20260310-drm-bridge-atomic-vs-remove-clear_and_put-v2-1-51fe222f3cf0@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2026-03-10 13:13:23 +01:00
drm/bridge: add list of removed refcounted bridges Between drm_bridge_add() and drm_bridge_remove() bridges are registered to the DRM core via the global bridge_list and visible in /sys/kernel/debug/dri/bridges. However between drm_bridge_remove() and the last drm_bridge_put() memory is still allocated even though the bridge is not registered, i.e. not in bridges_list, and also not visible in debugfs. This prevents debugging refcounted bridges lifetime, especially leaks due to a missing drm_bridge_put(). In order to allow debugfs to also show the removed bridges, move such bridges into a new ad-hoc list until they are eventually freed. Note this requires adding INIT_LIST_HEAD(&bridge->list) in the bridge initialization code. The lack of such init was not exposing any bug so far, but it would with the new code, for example when a bridge is allocated and then freed without calling drm_bridge_add(), which is common on probe errors. drm_bridge_add() needs special care for bridges being added after having been previously added and then removed. This happens for example for many non-DCS DSI host bridge drivers like samsung-dsim which drm_bridge_add/remove() themselves every time the DSI device does a DSI attaches/detach. When the DSI device is hot-pluggable this happens multiple times in the lifetime of the DSI host bridge. On every attach after the first one, drm_bridge_add() finds bridge->list in the removed list, not at the initialized state as drm_bridge_add() currently expects. Add a list_del_init() to remove the bridge from the lingering list and bring bridge->list back to the initialized state. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250915-drm-bridge-debugfs-removed-v9-1-6e5c0aff5de9@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-09-15 12:12:46 +02:00
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: add warning for bridges not using devm_drm_bridge_alloc() To the best of my knowledge, all drivers in the mainline kernel adding a DRM bridge are now converted to using devm_drm_bridge_alloc() for allocation and initialization. Among others this ensures initialization of the bridge refcount, allowing dynamic allocation lifetime. devm_drm_bridge_alloc() is now mandatory for all new bridges. Code using the old pattern ([devm_]kzalloc + filling the struct fields + drm_bridge_add) is not allowed anymore. Any drivers that might have been missed during the conversion, patches in flight towards mainline and out-of-tre drivers still using the old pattern will already be caught by a warning looking like: ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 2 PID: 83 at lib/refcount.c:25 refcount_warn_saturate+0x120/0x148 [...] Call trace: refcount_warn_saturate+0x120/0x148 (P) drm_bridge_get.part.0+0x70/0x98 [drm] drm_bridge_add+0x34/0x108 [drm] sn65dsi83_probe+0x200/0x480 [ti_sn65dsi83] [...] This warning comes from the refcount code and happens because drm_bridge_add() is increasing the refcount, which is uninitialized and thus initially zero. Having a warning and the corresponding stack trace is surely useful, but the warning text does not clarify the root problem nor how to fix it. Add a DRM_WARN() just before increasing the refcount, so the log will be much more readable: [drm] DRM bridge corrupted or not allocated by devm_drm_bridge_alloc() ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. [...etc...] A DRM_WARN is used because drm_warn and drm_WARN require a struct drm_device pointer which is not yet available when adding a bridge. Do not print the dev_name() in the warning because struct drm_bridge has no pointer to the struct device. The affected driver should be easy to catch based on the following stack trace however. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250620-drm-bridge-alloc-getput-drm-bridge-c-v9-3-ca53372c9a84@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-06-20 17:59:55 +02:00
drm/bridge: add list of removed refcounted bridges Between drm_bridge_add() and drm_bridge_remove() bridges are registered to the DRM core via the global bridge_list and visible in /sys/kernel/debug/dri/bridges. However between drm_bridge_remove() and the last drm_bridge_put() memory is still allocated even though the bridge is not registered, i.e. not in bridges_list, and also not visible in debugfs. This prevents debugging refcounted bridges lifetime, especially leaks due to a missing drm_bridge_put(). In order to allow debugfs to also show the removed bridges, move such bridges into a new ad-hoc list until they are eventually freed. Note this requires adding INIT_LIST_HEAD(&bridge->list) in the bridge initialization code. The lack of such init was not exposing any bug so far, but it would with the new code, for example when a bridge is allocated and then freed without calling drm_bridge_add(), which is common on probe errors. drm_bridge_add() needs special care for bridges being added after having been previously added and then removed. This happens for example for many non-DCS DSI host bridge drivers like samsung-dsim which drm_bridge_add/remove() themselves every time the DSI device does a DSI attaches/detach. When the DSI device is hot-pluggable this happens multiple times in the lifetime of the DSI host bridge. On every attach after the first one, drm_bridge_add() finds bridge->list in the removed list, not at the initialized state as drm_bridge_add() currently expects. Add a list_del_init() to remove the bridge from the lingering list and bring bridge->list back to the initialized state. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250915-drm-bridge-debugfs-removed-v9-1-6e5c0aff5de9@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-09-15 12:12:46 +02:00
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: add list of removed refcounted bridges Between drm_bridge_add() and drm_bridge_remove() bridges are registered to the DRM core via the global bridge_list and visible in /sys/kernel/debug/dri/bridges. However between drm_bridge_remove() and the last drm_bridge_put() memory is still allocated even though the bridge is not registered, i.e. not in bridges_list, and also not visible in debugfs. This prevents debugging refcounted bridges lifetime, especially leaks due to a missing drm_bridge_put(). In order to allow debugfs to also show the removed bridges, move such bridges into a new ad-hoc list until they are eventually freed. Note this requires adding INIT_LIST_HEAD(&bridge->list) in the bridge initialization code. The lack of such init was not exposing any bug so far, but it would with the new code, for example when a bridge is allocated and then freed without calling drm_bridge_add(), which is common on probe errors. drm_bridge_add() needs special care for bridges being added after having been previously added and then removed. This happens for example for many non-DCS DSI host bridge drivers like samsung-dsim which drm_bridge_add/remove() themselves every time the DSI device does a DSI attaches/detach. When the DSI device is hot-pluggable this happens multiple times in the lifetime of the DSI host bridge. On every attach after the first one, drm_bridge_add() finds bridge->list in the removed list, not at the initialized state as drm_bridge_add() currently expects. Add a list_del_init() to remove the bridge from the lingering list and bring bridge->list back to the initialized state. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250915-drm-bridge-debugfs-removed-v9-1-6e5c0aff5de9@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2025-09-15 12:12:46 +02:00
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: Add a drm_bridge_state object One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. v10: * Add changelog to the commit message v9: * Clarify the fact that the bridge->atomic_reset() and {connector,plane,crtc,...}->reset() semantics are different * Move the drm_atomic_private_obj_init() call back to drm_bridge_attach() * Check the presence of ->atomic_duplicate_state instead of ->atomic_reset in drm_atomic_add_encoder_bridges() * Fix copy&paste errors in the atomic bridge state helpers doc * Add A-b/R-b tags v8: * Move bridge state helpers out of the CONFIG_DEBUGFS section v7: * Move helpers, struct-defs, ... to atomic helper files to avoid the drm -> drm_kms_helper -> drm circular dep * Stop providing default implementation for atomic state reset, duplicate and destroy hooks (has to do with the helper/core split) * Drop all R-b/T-b as helpers have now be moved to other places v6: * Made helpers private, removed doc and moved them to satisfy dependencies * Renamed helpers to _default_ v5: * Re-introduced the helpers from v4 v4: * Fix the doc * Kill default helpers (inlined) * Fix drm_atomic_get_bridge_state() to check for an ERR_PTR() * Add Neil's R-b v3: * No changes v2: * Use drm_for_each_bridge_in_chain() * Rename helpers to be more consistent with the rest of the DRM API * Improve/fix the doc Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-2-boris.brezillon@collabora.com
2020-01-28 14:55:03 +01:00
drm/bridge: Add a drm_bridge_state object One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. v10: * Add changelog to the commit message v9: * Clarify the fact that the bridge->atomic_reset() and {connector,plane,crtc,...}->reset() semantics are different * Move the drm_atomic_private_obj_init() call back to drm_bridge_attach() * Check the presence of ->atomic_duplicate_state instead of ->atomic_reset in drm_atomic_add_encoder_bridges() * Fix copy&paste errors in the atomic bridge state helpers doc * Add A-b/R-b tags v8: * Move bridge state helpers out of the CONFIG_DEBUGFS section v7: * Move helpers, struct-defs, ... to atomic helper files to avoid the drm -> drm_kms_helper -> drm circular dep * Stop providing default implementation for atomic state reset, duplicate and destroy hooks (has to do with the helper/core split) * Drop all R-b/T-b as helpers have now be moved to other places v6: * Made helpers private, removed doc and moved them to satisfy dependencies * Renamed helpers to _default_ v5: * Re-introduced the helpers from v4 v4: * Fix the doc * Kill default helpers (inlined) * Fix drm_atomic_get_bridge_state() to check for an ERR_PTR() * Add Neil's R-b v3: * No changes v2: * Use drm_for_each_bridge_in_chain() * Rename helpers to be more consistent with the rest of the DRM API * Improve/fix the doc Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-2-boris.brezillon@collabora.com
2020-01-28 14:55:03 +01:00
drm/bridge: Add a drm_bridge_state object One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. v10: * Add changelog to the commit message v9: * Clarify the fact that the bridge->atomic_reset() and {connector,plane,crtc,...}->reset() semantics are different * Move the drm_atomic_private_obj_init() call back to drm_bridge_attach() * Check the presence of ->atomic_duplicate_state instead of ->atomic_reset in drm_atomic_add_encoder_bridges() * Fix copy&paste errors in the atomic bridge state helpers doc * Add A-b/R-b tags v8: * Move bridge state helpers out of the CONFIG_DEBUGFS section v7: * Move helpers, struct-defs, ... to atomic helper files to avoid the drm -> drm_kms_helper -> drm circular dep * Stop providing default implementation for atomic state reset, duplicate and destroy hooks (has to do with the helper/core split) * Drop all R-b/T-b as helpers have now be moved to other places v6: * Made helpers private, removed doc and moved them to satisfy dependencies * Renamed helpers to _default_ v5: * Re-introduced the helpers from v4 v4: * Fix the doc * Kill default helpers (inlined) * Fix drm_atomic_get_bridge_state() to check for an ERR_PTR() * Add Neil's R-b v3: * No changes v2: * Use drm_for_each_bridge_in_chain() * Rename helpers to be more consistent with the rest of the DRM API * Improve/fix the doc Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-2-boris.brezillon@collabora.com
2020-01-28 14:55:03 +01:00
drm/bridge: Extend bridge API to disable connector creation Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core). Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet. The change is based on the following semantic patch, with manual review and edits. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... } @ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> } @@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
2020-02-26 13:24:29 +02:00
drm/bridge: Extend bridge API to disable connector creation Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core). Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet. The change is based on the following semantic patch, with manual review and edits. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... } @ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> } @@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
2020-02-26 13:24:29 +02:00
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: Add a drm_bridge_state object One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. v10: * Add changelog to the commit message v9: * Clarify the fact that the bridge->atomic_reset() and {connector,plane,crtc,...}->reset() semantics are different * Move the drm_atomic_private_obj_init() call back to drm_bridge_attach() * Check the presence of ->atomic_duplicate_state instead of ->atomic_reset in drm_atomic_add_encoder_bridges() * Fix copy&paste errors in the atomic bridge state helpers doc * Add A-b/R-b tags v8: * Move bridge state helpers out of the CONFIG_DEBUGFS section v7: * Move helpers, struct-defs, ... to atomic helper files to avoid the drm -> drm_kms_helper -> drm circular dep * Stop providing default implementation for atomic state reset, duplicate and destroy hooks (has to do with the helper/core split) * Drop all R-b/T-b as helpers have now be moved to other places v6: * Made helpers private, removed doc and moved them to satisfy dependencies * Renamed helpers to _default_ v5: * Re-introduced the helpers from v4 v4: * Fix the doc * Kill default helpers (inlined) * Fix drm_atomic_get_bridge_state() to check for an ERR_PTR() * Add Neil's R-b v3: * No changes v2: * Use drm_for_each_bridge_in_chain() * Rename helpers to be more consistent with the rest of the DRM API * Improve/fix the doc Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-2-boris.brezillon@collabora.com
2020-01-28 14:55:03 +01:00
drm/bridge: Add a drm_bridge_state object One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. v10: * Add changelog to the commit message v9: * Clarify the fact that the bridge->atomic_reset() and {connector,plane,crtc,...}->reset() semantics are different * Move the drm_atomic_private_obj_init() call back to drm_bridge_attach() * Check the presence of ->atomic_duplicate_state instead of ->atomic_reset in drm_atomic_add_encoder_bridges() * Fix copy&paste errors in the atomic bridge state helpers doc * Add A-b/R-b tags v8: * Move bridge state helpers out of the CONFIG_DEBUGFS section v7: * Move helpers, struct-defs, ... to atomic helper files to avoid the drm -> drm_kms_helper -> drm circular dep * Stop providing default implementation for atomic state reset, duplicate and destroy hooks (has to do with the helper/core split) * Drop all R-b/T-b as helpers have now be moved to other places v6: * Made helpers private, removed doc and moved them to satisfy dependencies * Renamed helpers to _default_ v5: * Re-introduced the helpers from v4 v4: * Fix the doc * Kill default helpers (inlined) * Fix drm_atomic_get_bridge_state() to check for an ERR_PTR() * Add Neil's R-b v3: * No changes v2: * Use drm_for_each_bridge_in_chain() * Rename helpers to be more consistent with the rest of the DRM API * Improve/fix the doc Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-2-boris.brezillon@collabora.com
2020-01-28 14:55:03 +01:00
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: Add a drm_bridge_state object One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. v10: * Add changelog to the commit message v9: * Clarify the fact that the bridge->atomic_reset() and {connector,plane,crtc,...}->reset() semantics are different * Move the drm_atomic_private_obj_init() call back to drm_bridge_attach() * Check the presence of ->atomic_duplicate_state instead of ->atomic_reset in drm_atomic_add_encoder_bridges() * Fix copy&paste errors in the atomic bridge state helpers doc * Add A-b/R-b tags v8: * Move bridge state helpers out of the CONFIG_DEBUGFS section v7: * Move helpers, struct-defs, ... to atomic helper files to avoid the drm -> drm_kms_helper -> drm circular dep * Stop providing default implementation for atomic state reset, duplicate and destroy hooks (has to do with the helper/core split) * Drop all R-b/T-b as helpers have now be moved to other places v6: * Made helpers private, removed doc and moved them to satisfy dependencies * Renamed helpers to _default_ v5: * Re-introduced the helpers from v4 v4: * Fix the doc * Kill default helpers (inlined) * Fix drm_atomic_get_bridge_state() to check for an ERR_PTR() * Add Neil's R-b v3: * No changes v2: * Use drm_for_each_bridge_in_chain() * Rename helpers to be more consistent with the rest of the DRM API * Improve/fix the doc Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-2-boris.brezillon@collabora.com
2020-01-28 14:55:03 +01:00
drm/bridge: Add a drm_bridge_state object One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. v10: * Add changelog to the commit message v9: * Clarify the fact that the bridge->atomic_reset() and {connector,plane,crtc,...}->reset() semantics are different * Move the drm_atomic_private_obj_init() call back to drm_bridge_attach() * Check the presence of ->atomic_duplicate_state instead of ->atomic_reset in drm_atomic_add_encoder_bridges() * Fix copy&paste errors in the atomic bridge state helpers doc * Add A-b/R-b tags v8: * Move bridge state helpers out of the CONFIG_DEBUGFS section v7: * Move helpers, struct-defs, ... to atomic helper files to avoid the drm -> drm_kms_helper -> drm circular dep * Stop providing default implementation for atomic state reset, duplicate and destroy hooks (has to do with the helper/core split) * Drop all R-b/T-b as helpers have now be moved to other places v6: * Made helpers private, removed doc and moved them to satisfy dependencies * Renamed helpers to _default_ v5: * Re-introduced the helpers from v4 v4: * Fix the doc * Kill default helpers (inlined) * Fix drm_atomic_get_bridge_state() to check for an ERR_PTR() * Add Neil's R-b v3: * No changes v2: * Use drm_for_each_bridge_in_chain() * Rename helpers to be more consistent with the rest of the DRM API * Improve/fix the doc Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-2-boris.brezillon@collabora.com
2020-01-28 14:55:03 +01:00
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: Add a drm_bridge_state object One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. v10: * Add changelog to the commit message v9: * Clarify the fact that the bridge->atomic_reset() and {connector,plane,crtc,...}->reset() semantics are different * Move the drm_atomic_private_obj_init() call back to drm_bridge_attach() * Check the presence of ->atomic_duplicate_state instead of ->atomic_reset in drm_atomic_add_encoder_bridges() * Fix copy&paste errors in the atomic bridge state helpers doc * Add A-b/R-b tags v8: * Move bridge state helpers out of the CONFIG_DEBUGFS section v7: * Move helpers, struct-defs, ... to atomic helper files to avoid the drm -> drm_kms_helper -> drm circular dep * Stop providing default implementation for atomic state reset, duplicate and destroy hooks (has to do with the helper/core split) * Drop all R-b/T-b as helpers have now be moved to other places v6: * Made helpers private, removed doc and moved them to satisfy dependencies * Renamed helpers to _default_ v5: * Re-introduced the helpers from v4 v4: * Fix the doc * Kill default helpers (inlined) * Fix drm_atomic_get_bridge_state() to check for an ERR_PTR() * Add Neil's R-b v3: * No changes v2: * Use drm_for_each_bridge_in_chain() * Rename helpers to be more consistent with the rest of the DRM API * Improve/fix the doc Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-2-boris.brezillon@collabora.com
2020-01-28 14:55:03 +01:00
drm/bridge: Extend bridge API to disable connector creation Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core). Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet. The change is based on the following semantic patch, with manual review and edits. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... } @ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> } @@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
2020-02-26 13:24:29 +02:00
drm: bridge: Allow daisy chaining of bridges Allow drm_bridge objects to link to each other in order to form an encoder chain. The requirement for creating a chain of bridges comes because the MSM drm driver uses up its encoder and bridge objects for blocks within the SoC itself. There isn't anything left to use if the SoC display output is connected to an external encoder IC. Having an additional bridge connected to the existing bridge helps here. In general, it is possible for platforms to have multiple devices between the encoder and the connector/panel that require some sort of configuration. We create drm bridge helper functions corresponding to each op in 'drm_bridge_funcs'. These helpers call the corresponding 'drm_bridge_funcs' op for the entire chain of bridges. These helpers are used internally by drm_atomic_helper.c and drm_crtc_helper.c. The drm_bridge_enable/pre_enable helpers execute enable/pre_enable ops of the bridge closet to the encoder, and proceed until the last bridge in the chain is enabled. The same holds for drm_bridge_mode_set/mode_fixup helpers. The drm_bridge_disable/post_disable helpers disable the last bridge in the chain first, and proceed until the first bridge in the chain is disabled. drm_bridge_attach() remains the same. As before, the driver calling this function should make sure it has set the links correctly. The order in which the bridges are connected to each other determines the order in which the calls are made. One requirement is that every bridge in the chain should point the parent encoder object. This is required since bridge drivers expect a valid encoder pointer in drm_bridge. For example, consider a chain where an encoder's output is connected to bridge1, and bridge1's output is connected to bridge2: /* Like before, attach bridge to an encoder */ bridge1->encoder = encoder; ret = drm_bridge_attach(dev, bridge1); .. /* * set the first bridge's 'next' bridge to bridge2, set its encoder * as bridge1's encoder */ bridge1->next = bridge2 bridge2->encoder = bridge1->encoder; ret = drm_bridge_attach(dev, bridge2); ... ... This method of bridge chaining isn't intrusive and existing drivers that use drm_bridge will behave the same way as before. The bridge helpers also cleans up the atomic and crtc helper files a bit. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-21 11:03:16 +05:30
drm: bridge: Allow daisy chaining of bridges Allow drm_bridge objects to link to each other in order to form an encoder chain. The requirement for creating a chain of bridges comes because the MSM drm driver uses up its encoder and bridge objects for blocks within the SoC itself. There isn't anything left to use if the SoC display output is connected to an external encoder IC. Having an additional bridge connected to the existing bridge helps here. In general, it is possible for platforms to have multiple devices between the encoder and the connector/panel that require some sort of configuration. We create drm bridge helper functions corresponding to each op in 'drm_bridge_funcs'. These helpers call the corresponding 'drm_bridge_funcs' op for the entire chain of bridges. These helpers are used internally by drm_atomic_helper.c and drm_crtc_helper.c. The drm_bridge_enable/pre_enable helpers execute enable/pre_enable ops of the bridge closet to the encoder, and proceed until the last bridge in the chain is enabled. The same holds for drm_bridge_mode_set/mode_fixup helpers. The drm_bridge_disable/post_disable helpers disable the last bridge in the chain first, and proceed until the first bridge in the chain is disabled. drm_bridge_attach() remains the same. As before, the driver calling this function should make sure it has set the links correctly. The order in which the bridges are connected to each other determines the order in which the calls are made. One requirement is that every bridge in the chain should point the parent encoder object. This is required since bridge drivers expect a valid encoder pointer in drm_bridge. For example, consider a chain where an encoder's output is connected to bridge1, and bridge1's output is connected to bridge2: /* Like before, attach bridge to an encoder */ bridge1->encoder = encoder; ret = drm_bridge_attach(dev, bridge1); .. /* * set the first bridge's 'next' bridge to bridge2, set its encoder * as bridge1's encoder */ bridge1->next = bridge2 bridge2->encoder = bridge1->encoder; ret = drm_bridge_attach(dev, bridge2); ... ... This method of bridge chaining isn't intrusive and existing drivers that use drm_bridge will behave the same way as before. The bridge helpers also cleans up the atomic and crtc helper files a bit. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-21 11:03:16 +05:30
drm: bridge: Allow daisy chaining of bridges Allow drm_bridge objects to link to each other in order to form an encoder chain. The requirement for creating a chain of bridges comes because the MSM drm driver uses up its encoder and bridge objects for blocks within the SoC itself. There isn't anything left to use if the SoC display output is connected to an external encoder IC. Having an additional bridge connected to the existing bridge helps here. In general, it is possible for platforms to have multiple devices between the encoder and the connector/panel that require some sort of configuration. We create drm bridge helper functions corresponding to each op in 'drm_bridge_funcs'. These helpers call the corresponding 'drm_bridge_funcs' op for the entire chain of bridges. These helpers are used internally by drm_atomic_helper.c and drm_crtc_helper.c. The drm_bridge_enable/pre_enable helpers execute enable/pre_enable ops of the bridge closet to the encoder, and proceed until the last bridge in the chain is enabled. The same holds for drm_bridge_mode_set/mode_fixup helpers. The drm_bridge_disable/post_disable helpers disable the last bridge in the chain first, and proceed until the first bridge in the chain is disabled. drm_bridge_attach() remains the same. As before, the driver calling this function should make sure it has set the links correctly. The order in which the bridges are connected to each other determines the order in which the calls are made. One requirement is that every bridge in the chain should point the parent encoder object. This is required since bridge drivers expect a valid encoder pointer in drm_bridge. For example, consider a chain where an encoder's output is connected to bridge1, and bridge1's output is connected to bridge2: /* Like before, attach bridge to an encoder */ bridge1->encoder = encoder; ret = drm_bridge_attach(dev, bridge1); .. /* * set the first bridge's 'next' bridge to bridge2, set its encoder * as bridge1's encoder */ bridge1->next = bridge2 bridge2->encoder = bridge1->encoder; ret = drm_bridge_attach(dev, bridge2); ... ... This method of bridge chaining isn't intrusive and existing drivers that use drm_bridge will behave the same way as before. The bridge helpers also cleans up the atomic and crtc helper files a bit. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-21 11:03:16 +05:30
drm: bridge: Allow daisy chaining of bridges Allow drm_bridge objects to link to each other in order to form an encoder chain. The requirement for creating a chain of bridges comes because the MSM drm driver uses up its encoder and bridge objects for blocks within the SoC itself. There isn't anything left to use if the SoC display output is connected to an external encoder IC. Having an additional bridge connected to the existing bridge helps here. In general, it is possible for platforms to have multiple devices between the encoder and the connector/panel that require some sort of configuration. We create drm bridge helper functions corresponding to each op in 'drm_bridge_funcs'. These helpers call the corresponding 'drm_bridge_funcs' op for the entire chain of bridges. These helpers are used internally by drm_atomic_helper.c and drm_crtc_helper.c. The drm_bridge_enable/pre_enable helpers execute enable/pre_enable ops of the bridge closet to the encoder, and proceed until the last bridge in the chain is enabled. The same holds for drm_bridge_mode_set/mode_fixup helpers. The drm_bridge_disable/post_disable helpers disable the last bridge in the chain first, and proceed until the first bridge in the chain is disabled. drm_bridge_attach() remains the same. As before, the driver calling this function should make sure it has set the links correctly. The order in which the bridges are connected to each other determines the order in which the calls are made. One requirement is that every bridge in the chain should point the parent encoder object. This is required since bridge drivers expect a valid encoder pointer in drm_bridge. For example, consider a chain where an encoder's output is connected to bridge1, and bridge1's output is connected to bridge2: /* Like before, attach bridge to an encoder */ bridge1->encoder = encoder; ret = drm_bridge_attach(dev, bridge1); .. /* * set the first bridge's 'next' bridge to bridge2, set its encoder * as bridge1's encoder */ bridge1->next = bridge2 bridge2->encoder = bridge1->encoder; ret = drm_bridge_attach(dev, bridge2); ... ... This method of bridge chaining isn't intrusive and existing drivers that use drm_bridge will behave the same way as before. The bridge helpers also cleans up the atomic and crtc helper files a bit. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-21 11:03:16 +05:30
drm: bridge: Allow daisy chaining of bridges Allow drm_bridge objects to link to each other in order to form an encoder chain. The requirement for creating a chain of bridges comes because the MSM drm driver uses up its encoder and bridge objects for blocks within the SoC itself. There isn't anything left to use if the SoC display output is connected to an external encoder IC. Having an additional bridge connected to the existing bridge helps here. In general, it is possible for platforms to have multiple devices between the encoder and the connector/panel that require some sort of configuration. We create drm bridge helper functions corresponding to each op in 'drm_bridge_funcs'. These helpers call the corresponding 'drm_bridge_funcs' op for the entire chain of bridges. These helpers are used internally by drm_atomic_helper.c and drm_crtc_helper.c. The drm_bridge_enable/pre_enable helpers execute enable/pre_enable ops of the bridge closet to the encoder, and proceed until the last bridge in the chain is enabled. The same holds for drm_bridge_mode_set/mode_fixup helpers. The drm_bridge_disable/post_disable helpers disable the last bridge in the chain first, and proceed until the first bridge in the chain is disabled. drm_bridge_attach() remains the same. As before, the driver calling this function should make sure it has set the links correctly. The order in which the bridges are connected to each other determines the order in which the calls are made. One requirement is that every bridge in the chain should point the parent encoder object. This is required since bridge drivers expect a valid encoder pointer in drm_bridge. For example, consider a chain where an encoder's output is connected to bridge1, and bridge1's output is connected to bridge2: /* Like before, attach bridge to an encoder */ bridge1->encoder = encoder; ret = drm_bridge_attach(dev, bridge1); .. /* * set the first bridge's 'next' bridge to bridge2, set its encoder * as bridge1's encoder */ bridge1->next = bridge2 bridge2->encoder = bridge1->encoder; ret = drm_bridge_attach(dev, bridge2); ... ... This method of bridge chaining isn't intrusive and existing drivers that use drm_bridge will behave the same way as before. The bridge helpers also cleans up the atomic and crtc helper files a bit. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-21 11:03:16 +05:30
drm: bridge: Allow daisy chaining of bridges Allow drm_bridge objects to link to each other in order to form an encoder chain. The requirement for creating a chain of bridges comes because the MSM drm driver uses up its encoder and bridge objects for blocks within the SoC itself. There isn't anything left to use if the SoC display output is connected to an external encoder IC. Having an additional bridge connected to the existing bridge helps here. In general, it is possible for platforms to have multiple devices between the encoder and the connector/panel that require some sort of configuration. We create drm bridge helper functions corresponding to each op in 'drm_bridge_funcs'. These helpers call the corresponding 'drm_bridge_funcs' op for the entire chain of bridges. These helpers are used internally by drm_atomic_helper.c and drm_crtc_helper.c. The drm_bridge_enable/pre_enable helpers execute enable/pre_enable ops of the bridge closet to the encoder, and proceed until the last bridge in the chain is enabled. The same holds for drm_bridge_mode_set/mode_fixup helpers. The drm_bridge_disable/post_disable helpers disable the last bridge in the chain first, and proceed until the first bridge in the chain is disabled. drm_bridge_attach() remains the same. As before, the driver calling this function should make sure it has set the links correctly. The order in which the bridges are connected to each other determines the order in which the calls are made. One requirement is that every bridge in the chain should point the parent encoder object. This is required since bridge drivers expect a valid encoder pointer in drm_bridge. For example, consider a chain where an encoder's output is connected to bridge1, and bridge1's output is connected to bridge2: /* Like before, attach bridge to an encoder */ bridge1->encoder = encoder; ret = drm_bridge_attach(dev, bridge1); .. /* * set the first bridge's 'next' bridge to bridge2, set its encoder * as bridge1's encoder */ bridge1->next = bridge2 bridge2->encoder = bridge1->encoder; ret = drm_bridge_attach(dev, bridge2); ... ... This method of bridge chaining isn't intrusive and existing drivers that use drm_bridge will behave the same way as before. The bridge helpers also cleans up the atomic and crtc helper files a bit. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-21 11:03:16 +05:30
drm: bridge: Allow daisy chaining of bridges Allow drm_bridge objects to link to each other in order to form an encoder chain. The requirement for creating a chain of bridges comes because the MSM drm driver uses up its encoder and bridge objects for blocks within the SoC itself. There isn't anything left to use if the SoC display output is connected to an external encoder IC. Having an additional bridge connected to the existing bridge helps here. In general, it is possible for platforms to have multiple devices between the encoder and the connector/panel that require some sort of configuration. We create drm bridge helper functions corresponding to each op in 'drm_bridge_funcs'. These helpers call the corresponding 'drm_bridge_funcs' op for the entire chain of bridges. These helpers are used internally by drm_atomic_helper.c and drm_crtc_helper.c. The drm_bridge_enable/pre_enable helpers execute enable/pre_enable ops of the bridge closet to the encoder, and proceed until the last bridge in the chain is enabled. The same holds for drm_bridge_mode_set/mode_fixup helpers. The drm_bridge_disable/post_disable helpers disable the last bridge in the chain first, and proceed until the first bridge in the chain is disabled. drm_bridge_attach() remains the same. As before, the driver calling this function should make sure it has set the links correctly. The order in which the bridges are connected to each other determines the order in which the calls are made. One requirement is that every bridge in the chain should point the parent encoder object. This is required since bridge drivers expect a valid encoder pointer in drm_bridge. For example, consider a chain where an encoder's output is connected to bridge1, and bridge1's output is connected to bridge2: /* Like before, attach bridge to an encoder */ bridge1->encoder = encoder; ret = drm_bridge_attach(dev, bridge1); .. /* * set the first bridge's 'next' bridge to bridge2, set its encoder * as bridge1's encoder */ bridge1->next = bridge2 bridge2->encoder = bridge1->encoder; ret = drm_bridge_attach(dev, bridge2); ... ... This method of bridge chaining isn't intrusive and existing drivers that use drm_bridge will behave the same way as before. The bridge helpers also cleans up the atomic and crtc helper files a bit. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-21 11:03:16 +05:30
drm: bridge: Allow daisy chaining of bridges Allow drm_bridge objects to link to each other in order to form an encoder chain. The requirement for creating a chain of bridges comes because the MSM drm driver uses up its encoder and bridge objects for blocks within the SoC itself. There isn't anything left to use if the SoC display output is connected to an external encoder IC. Having an additional bridge connected to the existing bridge helps here. In general, it is possible for platforms to have multiple devices between the encoder and the connector/panel that require some sort of configuration. We create drm bridge helper functions corresponding to each op in 'drm_bridge_funcs'. These helpers call the corresponding 'drm_bridge_funcs' op for the entire chain of bridges. These helpers are used internally by drm_atomic_helper.c and drm_crtc_helper.c. The drm_bridge_enable/pre_enable helpers execute enable/pre_enable ops of the bridge closet to the encoder, and proceed until the last bridge in the chain is enabled. The same holds for drm_bridge_mode_set/mode_fixup helpers. The drm_bridge_disable/post_disable helpers disable the last bridge in the chain first, and proceed until the first bridge in the chain is disabled. drm_bridge_attach() remains the same. As before, the driver calling this function should make sure it has set the links correctly. The order in which the bridges are connected to each other determines the order in which the calls are made. One requirement is that every bridge in the chain should point the parent encoder object. This is required since bridge drivers expect a valid encoder pointer in drm_bridge. For example, consider a chain where an encoder's output is connected to bridge1, and bridge1's output is connected to bridge2: /* Like before, attach bridge to an encoder */ bridge1->encoder = encoder; ret = drm_bridge_attach(dev, bridge1); .. /* * set the first bridge's 'next' bridge to bridge2, set its encoder * as bridge1's encoder */ bridge1->next = bridge2 bridge2->encoder = bridge1->encoder; ret = drm_bridge_attach(dev, bridge2); ... ... This method of bridge chaining isn't intrusive and existing drivers that use drm_bridge will behave the same way as before. The bridge helpers also cleans up the atomic and crtc helper files a bit. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-21 11:03:16 +05:30
drm/bridge: Fix improper bridge init order with pre_enable_prev_first For a given bridge pipeline if any bridge sets pre_enable_prev_first flag then the pre_enable for the previous bridge will be called before pre_enable of this bridge and opposite is done for post_disable. These are the potential bridge flags to alter bridge init order in order to satisfy the MIPI DSI host and downstream panel or bridge to function. However the existing pre_enable_prev_first logic with associated bridge ordering has broken for both pre_enable and post_disable calls. [pre_enable] The altered bridge ordering has failed if two consecutive bridges on a given pipeline enables the pre_enable_prev_first flag. Example: - Panel - Bridge 1 - Bridge 2 pre_enable_prev_first - Bridge 3 - Bridge 4 pre_enable_prev_first - Bridge 5 pre_enable_prev_first - Bridge 6 - Encoder In this example, Bridge 4 and Bridge 5 have pre_enable_prev_first. The logic looks for a bridge which enabled pre_enable_prev_first flag on each iteration and assigned the previou bridge to limit pointer if the bridge doesn't enable pre_enable_prev_first flags. If control found Bridge 2 is pre_enable_prev_first then the iteration looks for Bridge 3 and found it is not pre_enable_prev_first and assigns it's previous Bridge 4 to limit pointer and calls pre_enable of Bridge 3 and Bridge 2 and assign iter pointer with limit which is Bridge 4. Here is the actual problem, for the next iteration control look for Bridge 5 instead of Bridge 4 has iter pointer in previous iteration moved to Bridge 4 so this iteration skips the Bridge 4. The iteration found Bridge 6 doesn't pre_enable_prev_first flags so the limit assigned to Encoder. From next iteration Encoder skips as it is the last bridge for reverse order pipeline. So, the resulting pre_enable bridge order would be, - Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5. This patch fixes this by assigning limit to next pointer instead of previous bridge since the iteration always looks for bridge that does NOT request prev so assigning next makes sure the last bridge on a given iteration what exactly the limit bridge is. So, the resulting pre_enable bridge order with fix would be, - Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5, Bridge 4, Encoder. [post_disable] The altered bridge ordering has failed if two consecutive bridges on a given pipeline enables the pre_enable_prev_first flag. Example: - Panel - Bridge 1 - Bridge 2 pre_enable_prev_first - Bridge 3 - Bridge 4 pre_enable_prev_first - Bridge 5 pre_enable_prev_first - Bridge 6 - Encoder In this example Bridge 5 and Bridge 4 have pre_enable_prev_first. The logic looks for a bridge which enabled pre_enable_prev_first flags on each iteration and assigned the previou bridge to next and next to limit pointer if the bridge does enable pre_enable_prev_first flag. If control starts from Bridge 6 then it found next Bridge 5 is pre_enable_prev_first and immediately the next assigned to previous Bridge 6 and limit assignments to next Bridge 6 and call post_enable of Bridge 6 even though the next consecutive Bridge 5 is enabled with pre_enable_prev_first. This clearly misses the logic to find the state of next conducive bridge as everytime the next and limit assigns previous bridge if given bridge enabled pre_enable_prev_first. So, the resulting post_disable bridge order would be, - Encoder, Bridge 6, Bridge 5, Bridge 4, Bridge 3, Bridge 2, Bridge 1, Panel. This patch fixes this by assigning next with previou bridge only if the bridge doesn't enable pre_enable_prev_first flag and the next further assign it to limit. This way we can find the bridge that NOT requested prev to disable last. So, the resulting pre_enable bridge order with fix would be, - Encoder, Bridge 4, Bridge 5, Bridge 6, Bridge 2, Bridge 3, Bridge 1, Panel. Validated the bridge init ordering by incorporating dummy bridges in the sun6i-mipi-dsi pipeline Fixes: 4fb912e5e190 ("drm/bridge: Introduce pre_enable_prev_first to alter bridge init order") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230328170752.1102347-1-jagan@amarulasolutions.com
2023-03-28 22:37:51 +05:30
drm/bridge: Fix improper bridge init order with pre_enable_prev_first For a given bridge pipeline if any bridge sets pre_enable_prev_first flag then the pre_enable for the previous bridge will be called before pre_enable of this bridge and opposite is done for post_disable. These are the potential bridge flags to alter bridge init order in order to satisfy the MIPI DSI host and downstream panel or bridge to function. However the existing pre_enable_prev_first logic with associated bridge ordering has broken for both pre_enable and post_disable calls. [pre_enable] The altered bridge ordering has failed if two consecutive bridges on a given pipeline enables the pre_enable_prev_first flag. Example: - Panel - Bridge 1 - Bridge 2 pre_enable_prev_first - Bridge 3 - Bridge 4 pre_enable_prev_first - Bridge 5 pre_enable_prev_first - Bridge 6 - Encoder In this example, Bridge 4 and Bridge 5 have pre_enable_prev_first. The logic looks for a bridge which enabled pre_enable_prev_first flag on each iteration and assigned the previou bridge to limit pointer if the bridge doesn't enable pre_enable_prev_first flags. If control found Bridge 2 is pre_enable_prev_first then the iteration looks for Bridge 3 and found it is not pre_enable_prev_first and assigns it's previous Bridge 4 to limit pointer and calls pre_enable of Bridge 3 and Bridge 2 and assign iter pointer with limit which is Bridge 4. Here is the actual problem, for the next iteration control look for Bridge 5 instead of Bridge 4 has iter pointer in previous iteration moved to Bridge 4 so this iteration skips the Bridge 4. The iteration found Bridge 6 doesn't pre_enable_prev_first flags so the limit assigned to Encoder. From next iteration Encoder skips as it is the last bridge for reverse order pipeline. So, the resulting pre_enable bridge order would be, - Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5. This patch fixes this by assigning limit to next pointer instead of previous bridge since the iteration always looks for bridge that does NOT request prev so assigning next makes sure the last bridge on a given iteration what exactly the limit bridge is. So, the resulting pre_enable bridge order with fix would be, - Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5, Bridge 4, Encoder. [post_disable] The altered bridge ordering has failed if two consecutive bridges on a given pipeline enables the pre_enable_prev_first flag. Example: - Panel - Bridge 1 - Bridge 2 pre_enable_prev_first - Bridge 3 - Bridge 4 pre_enable_prev_first - Bridge 5 pre_enable_prev_first - Bridge 6 - Encoder In this example Bridge 5 and Bridge 4 have pre_enable_prev_first. The logic looks for a bridge which enabled pre_enable_prev_first flags on each iteration and assigned the previou bridge to next and next to limit pointer if the bridge does enable pre_enable_prev_first flag. If control starts from Bridge 6 then it found next Bridge 5 is pre_enable_prev_first and immediately the next assigned to previous Bridge 6 and limit assignments to next Bridge 6 and call post_enable of Bridge 6 even though the next consecutive Bridge 5 is enabled with pre_enable_prev_first. This clearly misses the logic to find the state of next conducive bridge as everytime the next and limit assigns previous bridge if given bridge enabled pre_enable_prev_first. So, the resulting post_disable bridge order would be, - Encoder, Bridge 6, Bridge 5, Bridge 4, Bridge 3, Bridge 2, Bridge 1, Panel. This patch fixes this by assigning next with previou bridge only if the bridge doesn't enable pre_enable_prev_first flag and the next further assign it to limit. This way we can find the bridge that NOT requested prev to disable last. So, the resulting pre_enable bridge order with fix would be, - Encoder, Bridge 4, Bridge 5, Bridge 6, Bridge 2, Bridge 3, Bridge 1, Panel. Validated the bridge init ordering by incorporating dummy bridges in the sun6i-mipi-dsi pipeline Fixes: 4fb912e5e190 ("drm/bridge: Introduce pre_enable_prev_first to alter bridge init order") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230328170752.1102347-1-jagan@amarulasolutions.com
2023-03-28 22:37:51 +05:30
drm/bridge: Fix improper bridge init order with pre_enable_prev_first For a given bridge pipeline if any bridge sets pre_enable_prev_first flag then the pre_enable for the previous bridge will be called before pre_enable of this bridge and opposite is done for post_disable. These are the potential bridge flags to alter bridge init order in order to satisfy the MIPI DSI host and downstream panel or bridge to function. However the existing pre_enable_prev_first logic with associated bridge ordering has broken for both pre_enable and post_disable calls. [pre_enable] The altered bridge ordering has failed if two consecutive bridges on a given pipeline enables the pre_enable_prev_first flag. Example: - Panel - Bridge 1 - Bridge 2 pre_enable_prev_first - Bridge 3 - Bridge 4 pre_enable_prev_first - Bridge 5 pre_enable_prev_first - Bridge 6 - Encoder In this example, Bridge 4 and Bridge 5 have pre_enable_prev_first. The logic looks for a bridge which enabled pre_enable_prev_first flag on each iteration and assigned the previou bridge to limit pointer if the bridge doesn't enable pre_enable_prev_first flags. If control found Bridge 2 is pre_enable_prev_first then the iteration looks for Bridge 3 and found it is not pre_enable_prev_first and assigns it's previous Bridge 4 to limit pointer and calls pre_enable of Bridge 3 and Bridge 2 and assign iter pointer with limit which is Bridge 4. Here is the actual problem, for the next iteration control look for Bridge 5 instead of Bridge 4 has iter pointer in previous iteration moved to Bridge 4 so this iteration skips the Bridge 4. The iteration found Bridge 6 doesn't pre_enable_prev_first flags so the limit assigned to Encoder. From next iteration Encoder skips as it is the last bridge for reverse order pipeline. So, the resulting pre_enable bridge order would be, - Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5. This patch fixes this by assigning limit to next pointer instead of previous bridge since the iteration always looks for bridge that does NOT request prev so assigning next makes sure the last bridge on a given iteration what exactly the limit bridge is. So, the resulting pre_enable bridge order with fix would be, - Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5, Bridge 4, Encoder. [post_disable] The altered bridge ordering has failed if two consecutive bridges on a given pipeline enables the pre_enable_prev_first flag. Example: - Panel - Bridge 1 - Bridge 2 pre_enable_prev_first - Bridge 3 - Bridge 4 pre_enable_prev_first - Bridge 5 pre_enable_prev_first - Bridge 6 - Encoder In this example Bridge 5 and Bridge 4 have pre_enable_prev_first. The logic looks for a bridge which enabled pre_enable_prev_first flags on each iteration and assigned the previou bridge to next and next to limit pointer if the bridge does enable pre_enable_prev_first flag. If control starts from Bridge 6 then it found next Bridge 5 is pre_enable_prev_first and immediately the next assigned to previous Bridge 6 and limit assignments to next Bridge 6 and call post_enable of Bridge 6 even though the next consecutive Bridge 5 is enabled with pre_enable_prev_first. This clearly misses the logic to find the state of next conducive bridge as everytime the next and limit assigns previous bridge if given bridge enabled pre_enable_prev_first. So, the resulting post_disable bridge order would be, - Encoder, Bridge 6, Bridge 5, Bridge 4, Bridge 3, Bridge 2, Bridge 1, Panel. This patch fixes this by assigning next with previou bridge only if the bridge doesn't enable pre_enable_prev_first flag and the next further assign it to limit. This way we can find the bridge that NOT requested prev to disable last. So, the resulting pre_enable bridge order with fix would be, - Encoder, Bridge 4, Bridge 5, Bridge 6, Bridge 2, Bridge 3, Bridge 1, Panel. Validated the bridge init ordering by incorporating dummy bridges in the sun6i-mipi-dsi pipeline Fixes: 4fb912e5e190 ("drm/bridge: Introduce pre_enable_prev_first to alter bridge init order") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230328170752.1102347-1-jagan@amarulasolutions.com
2023-03-28 22:37:51 +05:30
drm/bridge: Add the necessary bits to support bus format negotiation drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
2020-01-28 14:55:08 +01:00
drm/bridge: Add the necessary bits to support bus format negotiation drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
2020-01-28 14:55:08 +01:00
drm/bridge: Add the necessary bits to support bus format negotiation drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
2020-01-28 14:55:08 +01:00
drm/bridge: Add the necessary bits to support bus format negotiation drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
2020-01-28 14:55:08 +01:00
drm/bridge: Add the necessary bits to support bus format negotiation drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
2020-01-28 14:55:08 +01:00
drm/bridge: Add the necessary bits to support bus format negotiation drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
2020-01-28 14:55:08 +01:00
drm/bridge: Add the necessary bits to support bus format negotiation drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
2020-01-28 14:55:08 +01:00
drm/bridge: Add the necessary bits to support bus format negotiation drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
2020-01-28 14:55:08 +01:00
drm/bridge: Add the necessary bits to support bus format negotiation drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
2020-01-28 14:55:08 +01:00
drm/bridge: Add the necessary bits to support bus format negotiation drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
2020-01-28 14:55:08 +01:00
drm/bridge: Add the necessary bits to support bus format negotiation drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
2020-01-28 14:55:08 +01:00
drm/bridge: Add the necessary bits to support bus format negotiation drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
2020-01-28 14:55:08 +01:00
drm/bridge: Add the necessary bits to support bus format negotiation drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
2020-01-28 14:55:08 +01:00
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30
drm/bridge: make bridge registration independent of drm flow Currently, third party bridge drivers(ptn3460) are dependent on the corresponding encoder driver init, since bridge driver needs a drm_device pointer to finish drm initializations. The encoder driver passes the drm_device pointer to the bridge driver. Because of this dependency, third party drivers like ptn3460 doesn't adhere to the driver model. In this patch, we reframe the bridge registration framework so that bridge initialization is split into 2 steps, and bridge registration happens independent of drm flow: --Step 1: gather all the bridge settings independent of drm and add the bridge onto a global list of bridges. --Step 2: when the encoder driver is probed, call drm_bridge_attach for the corresponding bridge so that the bridge receives drm_device pointer and continues with connector and other drm initializations. The old set of bridge helpers are removed, and a set of new helpers are added to accomplish the 2 step initialization. The bridge devices register themselves onto global list of bridges when they get probed by calling "drm_bridge_add". The parent encoder driver waits till the bridge is available in the lookup table(by calling "of_drm_find_bridge") and then continues with its initialization. The encoder driver should also call "drm_bridge_attach" to pass on the drm_device to the bridge object. drm_bridge_attach inturn calls "bridge->funcs->attach" so that bridge can continue with drm related initializations. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-20 22:08:44 +05:30