linux/net/ipv4/route.c

3799 lines
96 KiB

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
ipv4: Convert ->flowi4_tos to dscp_t. Convert the ->flowic_tos field of struct flowi_common from __u8 to dscp_t, rename it ->flowic_dscp and propagate these changes to struct flowi and struct flowi4. We've had several bugs in the past where ECN bits could interfere with IPv4 routing, because these bits were not properly cleared when setting ->flowi4_tos. These bugs should be fixed now and the dscp_t type has been introduced to ensure that variables carrying DSCP values don't accidentally have any ECN bits set. Several variables and structure fields have been converted to dscp_t already, but the main IPv4 routing structure, struct flowi4, is still using a __u8. To avoid any future regression, this patch converts it to dscp_t. There are many users to convert at once. Fortunately, around half of ->flowi4_tos users already have a dscp_t value at hand, which they currently convert to __u8 using inet_dscp_to_dsfield(). For all of these users, we just need to drop that conversion. But, although we try to do the __u8 <-> dscp_t conversions at the boundaries of the network or of user space, some places still store TOS/DSCP variables as __u8 in core networking code. Those can hardly be converted either because the data structure is part of UAPI or because the same variable or field is also used for handling ECN in other parts of the code. In all of these cases where we don't have a dscp_t variable at hand, we need to use inet_dsfield_to_dscp() when interacting with ->flowi4_dscp. Changes since v1: * Fix space alignment in __bpf_redirect_neigh_v4() (Ido). Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/29acecb45e911d17446b9a3dbdb1ab7b821ea371.1756128932.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-25 15:37:43 +02:00
net: add bool confirm_neigh parameter for dst_ops.update_pmtu The MTU update code is supposed to be invoked in response to real networking events that update the PMTU. In IPv6 PMTU update function __ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor confirmed time. But for tunnel code, it will call pmtu before xmit, like: - tnl_update_pmtu() - skb_dst_update_pmtu() - ip6_rt_update_pmtu() - __ip6_rt_update_pmtu() - dst_confirm_neigh() If the tunnel remote dst mac address changed and we still do the neigh confirm, we will not be able to update neigh cache and ping6 remote will failed. So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we should not be invoking dst_confirm_neigh() as we have no evidence of successful two-way communication at this point. On the other hand it is also important to keep the neigh reachability fresh for TCP flows, so we cannot remove this dst_confirm_neigh() call. To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu to choose whether we should do neigh update or not. I will add the parameter in this patch and set all the callers to true to comply with the previous way, and fix the tunnel code one by one on later patches. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Suggested-by: David Miller <davem@davemloft.net> Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22 10:51:09 +08:00
net: Implement read-only protection and COW'ing of metrics. Routing metrics are now copy-on-write. Initially a route entry points it's metrics at a read-only location. If a routing table entry exists, it will point there. Else it will point at the all zero metric place-holder called 'dst_default_metrics'. The writeability state of the metrics is stored in the low bits of the metrics pointer, we have two bits left to spare if we want to store more states. For the initial implementation, COW is implemented simply via kmalloc. However future enhancements will change this to place the writable metrics somewhere else, in order to increase sharing. Very likely this "somewhere else" will be the inetpeer cache. Note also that this means that metrics updates may transiently fail if we cannot COW the metrics successfully. But even by itself, this patch should decrease memory usage and increase cache locality especially for routing workloads. In those cases the read-only metric copies stay in place and never get written to. TCP workloads where metrics get updated, and those rare cases where PMTU triggers occur, will take a very slight performance hit. But that hit will be alleviated when the long-term writable metrics move to a more sharable location. Since the metrics storage went from a u32 array of RTAX_MAX entries to what is essentially a pointer, some retooling of the dst_entry layout was necessary. Most importantly, we need to preserve the alignment of the reference count so that it doesn't share cache lines with the read-mostly state, as per Eric Dumazet's alignment assertion checks. The only non-trivial bit here is the move of the 'flags' member into the writeable cacheline. This is OK since we are always accessing the flags around the same moment when we made a modification to the reference count. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-26 20:51:05 -08:00
net: Implement read-only protection and COW'ing of metrics. Routing metrics are now copy-on-write. Initially a route entry points it's metrics at a read-only location. If a routing table entry exists, it will point there. Else it will point at the all zero metric place-holder called 'dst_default_metrics'. The writeability state of the metrics is stored in the low bits of the metrics pointer, we have two bits left to spare if we want to store more states. For the initial implementation, COW is implemented simply via kmalloc. However future enhancements will change this to place the writable metrics somewhere else, in order to increase sharing. Very likely this "somewhere else" will be the inetpeer cache. Note also that this means that metrics updates may transiently fail if we cannot COW the metrics successfully. But even by itself, this patch should decrease memory usage and increase cache locality especially for routing workloads. In those cases the read-only metric copies stay in place and never get written to. TCP workloads where metrics get updated, and those rare cases where PMTU triggers occur, will take a very slight performance hit. But that hit will be alleviated when the long-term writable metrics move to a more sharable location. Since the metrics storage went from a u32 array of RTAX_MAX entries to what is essentially a pointer, some retooling of the dst_entry layout was necessary. Most importantly, we need to preserve the alignment of the reference count so that it doesn't share cache lines with the read-mostly state, as per Eric Dumazet's alignment assertion checks. The only non-trivial bit here is the move of the 'flags' member into the writeable cacheline. This is OK since we are always accessing the flags around the same moment when we made a modification to the reference count. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-26 20:51:05 -08:00
net: Implement read-only protection and COW'ing of metrics. Routing metrics are now copy-on-write. Initially a route entry points it's metrics at a read-only location. If a routing table entry exists, it will point there. Else it will point at the all zero metric place-holder called 'dst_default_metrics'. The writeability state of the metrics is stored in the low bits of the metrics pointer, we have two bits left to spare if we want to store more states. For the initial implementation, COW is implemented simply via kmalloc. However future enhancements will change this to place the writable metrics somewhere else, in order to increase sharing. Very likely this "somewhere else" will be the inetpeer cache. Note also that this means that metrics updates may transiently fail if we cannot COW the metrics successfully. But even by itself, this patch should decrease memory usage and increase cache locality especially for routing workloads. In those cases the read-only metric copies stay in place and never get written to. TCP workloads where metrics get updated, and those rare cases where PMTU triggers occur, will take a very slight performance hit. But that hit will be alleviated when the long-term writable metrics move to a more sharable location. Since the metrics storage went from a u32 array of RTAX_MAX entries to what is essentially a pointer, some retooling of the dst_entry layout was necessary. Most importantly, we need to preserve the alignment of the reference count so that it doesn't share cache lines with the read-mostly state, as per Eric Dumazet's alignment assertion checks. The only non-trivial bit here is the move of the 'flags' member into the writeable cacheline. This is OK since we are always accessing the flags around the same moment when we made a modification to the reference count. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-26 20:51:05 -08:00
net: replace __this_cpu_inc in route.c with raw_cpu_inc The RT_CACHE_STAT_INC macro triggers the new preemption checks for __this_cpu ops. I do not see any other synchronization that would allow the use of a __this_cpu operation here however in commit dbd2915ce87e ("[IPV4]: RT_CACHE_STAT_INC() warning fix") Andrew justifies the use of raw_smp_processor_id() here because "we do not care" about races. In the past we agreed that the price of disabling interrupts here to get consistent counters would be too high. These counters may be inaccurate due to race conditions. The use of __this_cpu op improves the situation already from what commit dbd2915ce87e did since the single instruction emitted on x86 does not allow the race to occur anymore. However, non x86 platforms could still experience a race here. Trace: __this_cpu_add operation in preemptible [00000000] code: avahi-daemon/1193 caller is __this_cpu_preempt_check+0x38/0x60 CPU: 1 PID: 1193 Comm: avahi-daemon Tainted: GF 3.12.0-rc4+ #187 Call Trace: check_preemption_disabled+0xec/0x110 __this_cpu_preempt_check+0x38/0x60 __ip_route_output_key+0x575/0x8c0 ip_route_output_flow+0x27/0x70 udp_sendmsg+0x825/0xa20 inet_sendmsg+0x85/0xc0 sock_sendmsg+0x9c/0xd0 ___sys_sendmsg+0x37c/0x390 __sys_sendmsg+0x49/0x90 SyS_sendmsg+0x12/0x20 tracesys+0xe1/0xe6 Signed-off-by: Christoph Lameter <cl@linux.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 15:39:40 -07:00
net: fix route cache rebuilds We added an automatic route cache rebuilding in commit 1080d709fb9d8cd43 but had to correct few bugs. One of the assumption of original patch, was that entries where kept sorted in a given way. This assumption is known to be wrong (commit 1ddbcb005c395518 gave an explanation of this and corrected a leak) and expensive to respect. Paweł Staszewski reported to me one of his machine got its routing cache disabled after few messages like : [ 2677.850065] Route hash chain too long! [ 2677.850080] Adjust your secret_interval! [82839.662993] Route hash chain too long! [82839.662996] Adjust your secret_interval! [155843.731650] Route hash chain too long! [155843.731664] Adjust your secret_interval! [155843.811881] Route hash chain too long! [155843.811891] Adjust your secret_interval! [155843.858209] vlan0811: 5 rebuilds is over limit, route caching disabled [155843.858212] Route hash chain too long! [155843.858213] Adjust your secret_interval! This is because rt_intern_hash() might be fooled when computing a chain length, because multiple entries with same keys can differ because of TOS (or mark/oif) bits. In the rare case the fast algorithm see a too long chain, and before taking expensive path, we call a helper function in order to not count duplicates of same routes, that only differ with tos/mark/oif bits. This helper works with data already in cpu cache and is not be very expensive, despite its O(N^2) implementation. Paweł Staszewski sucessfully tested this patch on his loaded router. Reported-and-tested-by: Paweł Staszewski <pstaszewski@itcare.pl> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08 03:20:00 +00:00
ipv4: Add helpers for neigh lookup for nexthop A common theme in the output path is looking up a neigh entry for a nexthop, either the gateway in an rtable or a fallback to the daddr in the skb: nexthop = (__force u32)rt_nexthop(rt, ip_hdr(skb)->daddr); neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); To allow the nexthop to be an IPv6 address we need to consider the family of the nexthop and then call __ipv{4,6}_neigh_lookup_noref based on it. To make this simpler, add a ip_neigh_gw4 helper similar to ip_neigh_gw6 added in an earlier patch which handles: neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); And then add a second one, ip_neigh_for_gw, that calls either ip_neigh_gw4 or ip_neigh_gw6 based on the address family of the gateway. Update the output paths in the VRF driver and core v4 code to use ip_neigh_for_gw simplifying the family based lookup and making both ready for a v6 nexthop. ipv4_neigh_lookup has a different need - the potential to resolve a passed in address in addition to any gateway in the rtable or skb. Since this is a one-off, add ip_neigh_gw4 and ip_neigh_gw6 diectly. The difference between __neigh_create used by the helpers and neigh_create called by ipv4_neigh_lookup is taking a refcount, so add rcu_read_lock_bh and bump the refcnt on the neigh entry. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-05 16:30:34 -07:00
ipv4: Fix NULL pointer dereference in ipv4_neigh_lookup() Both ip_neigh_gw4() and ip_neigh_gw6() can return either a valid pointer or an error pointer, but the code currently checks that the pointer is not NULL. Fix this by checking that the pointer is not an error pointer, as this can result in a NULL pointer dereference [1]. Specifically, I believe that what happened is that ip_neigh_gw4() returned '-EINVAL' (0xffffffffffffffea) to which the offset of 'refcnt' (0x70) was added, which resulted in the address 0x000000000000005a. [1] BUG: KASAN: null-ptr-deref in refcount_inc_not_zero_checked+0x6e/0x180 Read of size 4 at addr 000000000000005a by task swapper/2/0 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.2.0-rc6-custom-reg-179657-gaa32d89 #396 Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017 Call Trace: <IRQ> dump_stack+0x73/0xbb __kasan_report+0x188/0x1ea kasan_report+0xe/0x20 refcount_inc_not_zero_checked+0x6e/0x180 ipv4_neigh_lookup+0x365/0x12c0 __neigh_update+0x1467/0x22f0 arp_process.constprop.6+0x82e/0x1f00 __netif_receive_skb_one_core+0xee/0x170 process_backlog+0xe3/0x640 net_rx_action+0x755/0xd90 __do_softirq+0x29b/0xae7 irq_exit+0x177/0x1c0 smp_apic_timer_interrupt+0x164/0x5e0 apic_timer_interrupt+0xf/0x20 </IRQ> Fixes: 5c9f7c1dfc2e ("ipv4: Add helpers for neigh lookup for nexthop") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-04 19:26:38 +03:00
ipv4: Add helpers for neigh lookup for nexthop A common theme in the output path is looking up a neigh entry for a nexthop, either the gateway in an rtable or a fallback to the daddr in the skb: nexthop = (__force u32)rt_nexthop(rt, ip_hdr(skb)->daddr); neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); To allow the nexthop to be an IPv6 address we need to consider the family of the nexthop and then call __ipv{4,6}_neigh_lookup_noref based on it. To make this simpler, add a ip_neigh_gw4 helper similar to ip_neigh_gw6 added in an earlier patch which handles: neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); And then add a second one, ip_neigh_for_gw, that calls either ip_neigh_gw4 or ip_neigh_gw6 based on the address family of the gateway. Update the output paths in the VRF driver and core v4 code to use ip_neigh_for_gw simplifying the family based lookup and making both ready for a v6 nexthop. ipv4_neigh_lookup has a different need - the potential to resolve a passed in address in addition to any gateway in the rtable or skb. Since this is a one-off, add ip_neigh_gw4 and ip_neigh_gw6 diectly. The difference between __neigh_create used by the helpers and neigh_create called by ipv4_neigh_lookup is taking a refcount, so add rcu_read_lock_bh and bump the refcnt on the neigh entry. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-05 16:30:34 -07:00
ipv4: Add helpers for neigh lookup for nexthop A common theme in the output path is looking up a neigh entry for a nexthop, either the gateway in an rtable or a fallback to the daddr in the skb: nexthop = (__force u32)rt_nexthop(rt, ip_hdr(skb)->daddr); neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); To allow the nexthop to be an IPv6 address we need to consider the family of the nexthop and then call __ipv{4,6}_neigh_lookup_noref based on it. To make this simpler, add a ip_neigh_gw4 helper similar to ip_neigh_gw6 added in an earlier patch which handles: neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); And then add a second one, ip_neigh_for_gw, that calls either ip_neigh_gw4 or ip_neigh_gw6 based on the address family of the gateway. Update the output paths in the VRF driver and core v4 code to use ip_neigh_for_gw simplifying the family based lookup and making both ready for a v6 nexthop. ipv4_neigh_lookup has a different need - the potential to resolve a passed in address in addition to any gateway in the rtable or skb. Since this is a one-off, add ip_neigh_gw4 and ip_neigh_gw6 diectly. The difference between __neigh_create used by the helpers and neigh_create called by ipv4_neigh_lookup is taking a refcount, so add rcu_read_lock_bh and bump the refcnt on the neigh entry. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-05 16:30:34 -07:00
ip: make IP identifiers less predictable In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and Jedidiah describe ways exploiting linux IP identifier generation to infer whether two machines are exchanging packets. With commit 73f156a6e8c1 ("inetpeer: get rid of ip_id_count"), we changed IP id generation, but this does not really prevent this side-channel technique. This patch adds a random amount of perturbation so that IP identifiers for a given destination [1] are no longer monotonically increasing after an idle period. Note that prandom_u32_max(1) returns 0, so if generator is used at most once per jiffy, this patch inserts no hole in the ID suite and do not increase collision probability. This is jiffies based, so in the worst case (HZ=1000), the id can rollover after ~65 seconds of idle time, which should be fine. We also change the hash used in __ip_select_ident() to not only hash on daddr, but also saddr and protocol, so that ICMP probes can not be used to infer information for other protocols. For IPv6, adds saddr into the hash as well, but not nexthdr. If I ping the patched target, we can see ID are now hard to predict. 21:57:11.008086 IP (...) A > target: ICMP echo request, seq 1, length 64 21:57:11.010752 IP (... id 2081 ...) target > A: ICMP echo reply, seq 1, length 64 21:57:12.013133 IP (...) A > target: ICMP echo request, seq 2, length 64 21:57:12.015737 IP (... id 3039 ...) target > A: ICMP echo reply, seq 2, length 64 21:57:13.016580 IP (...) A > target: ICMP echo request, seq 3, length 64 21:57:13.019251 IP (... id 3437 ...) target > A: ICMP echo reply, seq 3, length 64 [1] TCP sessions uses a per flow ID generator not changed by this patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jeffrey Knockel <jeffk@cs.unm.edu> Reported-by: Jedidiah R. Crandall <crandall@cs.unm.edu> Cc: Willy Tarreau <w@1wt.eu> Cc: Hannes Frederic Sowa <hannes@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-26 08:58:10 +02:00
ip: make IP identifiers less predictable In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and Jedidiah describe ways exploiting linux IP identifier generation to infer whether two machines are exchanging packets. With commit 73f156a6e8c1 ("inetpeer: get rid of ip_id_count"), we changed IP id generation, but this does not really prevent this side-channel technique. This patch adds a random amount of perturbation so that IP identifiers for a given destination [1] are no longer monotonically increasing after an idle period. Note that prandom_u32_max(1) returns 0, so if generator is used at most once per jiffy, this patch inserts no hole in the ID suite and do not increase collision probability. This is jiffies based, so in the worst case (HZ=1000), the id can rollover after ~65 seconds of idle time, which should be fine. We also change the hash used in __ip_select_ident() to not only hash on daddr, but also saddr and protocol, so that ICMP probes can not be used to infer information for other protocols. For IPv6, adds saddr into the hash as well, but not nexthdr. If I ping the patched target, we can see ID are now hard to predict. 21:57:11.008086 IP (...) A > target: ICMP echo request, seq 1, length 64 21:57:11.010752 IP (... id 2081 ...) target > A: ICMP echo reply, seq 1, length 64 21:57:12.013133 IP (...) A > target: ICMP echo request, seq 2, length 64 21:57:12.015737 IP (... id 3039 ...) target > A: ICMP echo reply, seq 2, length 64 21:57:13.016580 IP (...) A > target: ICMP echo request, seq 3, length 64 21:57:13.019251 IP (... id 3437 ...) target > A: ICMP echo reply, seq 3, length 64 [1] TCP sessions uses a per flow ID generator not changed by this patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jeffrey Knockel <jeffk@cs.unm.edu> Reported-by: Jedidiah R. Crandall <crandall@cs.unm.edu> Cc: Willy Tarreau <w@1wt.eu> Cc: Hannes Frederic Sowa <hannes@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-26 08:58:10 +02:00
ip: make IP identifiers less predictable In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and Jedidiah describe ways exploiting linux IP identifier generation to infer whether two machines are exchanging packets. With commit 73f156a6e8c1 ("inetpeer: get rid of ip_id_count"), we changed IP id generation, but this does not really prevent this side-channel technique. This patch adds a random amount of perturbation so that IP identifiers for a given destination [1] are no longer monotonically increasing after an idle period. Note that prandom_u32_max(1) returns 0, so if generator is used at most once per jiffy, this patch inserts no hole in the ID suite and do not increase collision probability. This is jiffies based, so in the worst case (HZ=1000), the id can rollover after ~65 seconds of idle time, which should be fine. We also change the hash used in __ip_select_ident() to not only hash on daddr, but also saddr and protocol, so that ICMP probes can not be used to infer information for other protocols. For IPv6, adds saddr into the hash as well, but not nexthdr. If I ping the patched target, we can see ID are now hard to predict. 21:57:11.008086 IP (...) A > target: ICMP echo request, seq 1, length 64 21:57:11.010752 IP (... id 2081 ...) target > A: ICMP echo reply, seq 1, length 64 21:57:12.013133 IP (...) A > target: ICMP echo request, seq 2, length 64 21:57:12.015737 IP (... id 3039 ...) target > A: ICMP echo reply, seq 2, length 64 21:57:13.016580 IP (...) A > target: ICMP echo request, seq 3, length 64 21:57:13.019251 IP (... id 3437 ...) target > A: ICMP echo reply, seq 3, length 64 [1] TCP sessions uses a per flow ID generator not changed by this patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jeffrey Knockel <jeffk@cs.unm.edu> Reported-by: Jedidiah R. Crandall <crandall@cs.unm.edu> Cc: Willy Tarreau <w@1wt.eu> Cc: Hannes Frederic Sowa <hannes@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-26 08:58:10 +02:00
ip: make IP identifiers less predictable In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and Jedidiah describe ways exploiting linux IP identifier generation to infer whether two machines are exchanging packets. With commit 73f156a6e8c1 ("inetpeer: get rid of ip_id_count"), we changed IP id generation, but this does not really prevent this side-channel technique. This patch adds a random amount of perturbation so that IP identifiers for a given destination [1] are no longer monotonically increasing after an idle period. Note that prandom_u32_max(1) returns 0, so if generator is used at most once per jiffy, this patch inserts no hole in the ID suite and do not increase collision probability. This is jiffies based, so in the worst case (HZ=1000), the id can rollover after ~65 seconds of idle time, which should be fine. We also change the hash used in __ip_select_ident() to not only hash on daddr, but also saddr and protocol, so that ICMP probes can not be used to infer information for other protocols. For IPv6, adds saddr into the hash as well, but not nexthdr. If I ping the patched target, we can see ID are now hard to predict. 21:57:11.008086 IP (...) A > target: ICMP echo request, seq 1, length 64 21:57:11.010752 IP (... id 2081 ...) target > A: ICMP echo reply, seq 1, length 64 21:57:12.013133 IP (...) A > target: ICMP echo request, seq 2, length 64 21:57:12.015737 IP (... id 3039 ...) target > A: ICMP echo reply, seq 2, length 64 21:57:13.016580 IP (...) A > target: ICMP echo request, seq 3, length 64 21:57:13.019251 IP (... id 3437 ...) target > A: ICMP echo reply, seq 3, length 64 [1] TCP sessions uses a per flow ID generator not changed by this patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jeffrey Knockel <jeffk@cs.unm.edu> Reported-by: Jedidiah R. Crandall <crandall@cs.unm.edu> Cc: Willy Tarreau <w@1wt.eu> Cc: Hannes Frederic Sowa <hannes@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-26 08:58:10 +02:00
ip: make IP identifiers less predictable In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and Jedidiah describe ways exploiting linux IP identifier generation to infer whether two machines are exchanging packets. With commit 73f156a6e8c1 ("inetpeer: get rid of ip_id_count"), we changed IP id generation, but this does not really prevent this side-channel technique. This patch adds a random amount of perturbation so that IP identifiers for a given destination [1] are no longer monotonically increasing after an idle period. Note that prandom_u32_max(1) returns 0, so if generator is used at most once per jiffy, this patch inserts no hole in the ID suite and do not increase collision probability. This is jiffies based, so in the worst case (HZ=1000), the id can rollover after ~65 seconds of idle time, which should be fine. We also change the hash used in __ip_select_ident() to not only hash on daddr, but also saddr and protocol, so that ICMP probes can not be used to infer information for other protocols. For IPv6, adds saddr into the hash as well, but not nexthdr. If I ping the patched target, we can see ID are now hard to predict. 21:57:11.008086 IP (...) A > target: ICMP echo request, seq 1, length 64 21:57:11.010752 IP (... id 2081 ...) target > A: ICMP echo reply, seq 1, length 64 21:57:12.013133 IP (...) A > target: ICMP echo request, seq 2, length 64 21:57:12.015737 IP (... id 3039 ...) target > A: ICMP echo reply, seq 2, length 64 21:57:13.016580 IP (...) A > target: ICMP echo request, seq 3, length 64 21:57:13.019251 IP (... id 3437 ...) target > A: ICMP echo reply, seq 3, length 64 [1] TCP sessions uses a per flow ID generator not changed by this patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jeffrey Knockel <jeffk@cs.unm.edu> Reported-by: Jedidiah R. Crandall <crandall@cs.unm.edu> Cc: Willy Tarreau <w@1wt.eu> Cc: Hannes Frederic Sowa <hannes@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-26 08:58:10 +02:00
ip: make IP identifiers less predictable In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and Jedidiah describe ways exploiting linux IP identifier generation to infer whether two machines are exchanging packets. With commit 73f156a6e8c1 ("inetpeer: get rid of ip_id_count"), we changed IP id generation, but this does not really prevent this side-channel technique. This patch adds a random amount of perturbation so that IP identifiers for a given destination [1] are no longer monotonically increasing after an idle period. Note that prandom_u32_max(1) returns 0, so if generator is used at most once per jiffy, this patch inserts no hole in the ID suite and do not increase collision probability. This is jiffies based, so in the worst case (HZ=1000), the id can rollover after ~65 seconds of idle time, which should be fine. We also change the hash used in __ip_select_ident() to not only hash on daddr, but also saddr and protocol, so that ICMP probes can not be used to infer information for other protocols. For IPv6, adds saddr into the hash as well, but not nexthdr. If I ping the patched target, we can see ID are now hard to predict. 21:57:11.008086 IP (...) A > target: ICMP echo request, seq 1, length 64 21:57:11.010752 IP (... id 2081 ...) target > A: ICMP echo reply, seq 1, length 64 21:57:12.013133 IP (...) A > target: ICMP echo request, seq 2, length 64 21:57:12.015737 IP (... id 3039 ...) target > A: ICMP echo reply, seq 2, length 64 21:57:13.016580 IP (...) A > target: ICMP echo request, seq 3, length 64 21:57:13.019251 IP (... id 3437 ...) target > A: ICMP echo reply, seq 3, length 64 [1] TCP sessions uses a per flow ID generator not changed by this patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jeffrey Knockel <jeffk@cs.unm.edu> Reported-by: Jedidiah R. Crandall <crandall@cs.unm.edu> Cc: Willy Tarreau <w@1wt.eu> Cc: Hannes Frederic Sowa <hannes@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-26 08:58:10 +02:00
ipv4: route: Prevent rt_bind_exception() from rebinding stale fnhe The sit driver's packet transmission path calls: sit_tunnel_xmit() -> update_or_create_fnhe(), which lead to fnhe_remove_oldest() being called to delete entries exceeding FNHE_RECLAIM_DEPTH+random. The race window is between fnhe_remove_oldest() selecting fnheX for deletion and the subsequent kfree_rcu(). During this time, the concurrent path's __mkroute_output() -> find_exception() can fetch the soon-to-be-deleted fnheX, and rt_bind_exception() then binds it with a new dst using a dst_hold(). When the original fnheX is freed via RCU, the dst reference remains permanently leaked. CPU 0 CPU 1 __mkroute_output() find_exception() [fnheX] update_or_create_fnhe() fnhe_remove_oldest() [fnheX] rt_bind_exception() [bind dst] RCU callback [fnheX freed, dst leak] This issue manifests as a device reference count leak and a warning in dmesg when unregistering the net device: unregister_netdevice: waiting for sitX to become free. Usage count = N Ido Schimmel provided the simple test validation method [1]. The fix clears 'oldest->fnhe_daddr' before calling fnhe_flush_routes(). Since rt_bind_exception() checks this field, setting it to zero prevents the stale fnhe from being reused and bound to a new dst just before it is freed. [1] ip netns add ns1 ip -n ns1 link set dev lo up ip -n ns1 address add 192.0.2.1/32 dev lo ip -n ns1 link add name dummy1 up type dummy ip -n ns1 route add 192.0.2.2/32 dev dummy1 ip -n ns1 link add name gretap1 up arp off type gretap \ local 192.0.2.1 remote 192.0.2.2 ip -n ns1 route add 198.51.0.0/16 dev gretap1 taskset -c 0 ip netns exec ns1 mausezahn gretap1 \ -A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q & taskset -c 2 ip netns exec ns1 mausezahn gretap1 \ -A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q & sleep 10 ip netns pids ns1 | xargs kill ip netns del ns1 Cc: stable@vger.kernel.org Fixes: 67d6d681e15b ("ipv4: make exception cache less predictible") Signed-off-by: Chuang Wang <nashuiliang@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20251111064328.24440-1-nashuiliang@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-11-11 14:43:24 +08:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
net: ipv4 sysctl option to ignore routes when nexthop link is down This feature is only enabled with the new per-interface or ipv4 global sysctls called 'ignore_routes_with_linkdown'. net.ipv4.conf.all.ignore_routes_with_linkdown = 0 net.ipv4.conf.default.ignore_routes_with_linkdown = 0 net.ipv4.conf.lo.ignore_routes_with_linkdown = 0 ... When the above sysctls are set, will report to userspace that a route is dead and will no longer resolve to this nexthop when performing a fib lookup. This will signal to userspace that the route will not be selected. The signalling of a RTNH_F_DEAD is only passed to userspace if the sysctl is enabled and link is down. This was done as without it the netlink listeners would have no idea whether or not a nexthop would be selected. The kernel only sets RTNH_F_DEAD internally if the interface has IFF_UP cleared. With the new sysctl set, the following behavior can be observed (interface p8p1 is link-down): default via 10.0.5.2 dev p9p1 10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15 70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1 80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 dead linkdown 90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 dead linkdown 90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2 90.0.0.1 via 70.0.0.2 dev p7p1 src 70.0.0.1 cache local 80.0.0.1 dev lo src 80.0.0.1 cache <local> 80.0.0.2 via 10.0.5.2 dev p9p1 src 10.0.5.15 cache While the route does remain in the table (so it can be modified if needed rather than being wiped away as it would be if IFF_UP was cleared), the proper next-hop is chosen automatically when the link is down. Now interface p8p1 is linked-up: default via 10.0.5.2 dev p9p1 10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15 70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1 80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2 192.168.56.0/24 dev p2p1 proto kernel scope link src 192.168.56.2 90.0.0.1 via 80.0.0.2 dev p8p1 src 80.0.0.1 cache local 80.0.0.1 dev lo src 80.0.0.1 cache <local> 80.0.0.2 dev p8p1 src 80.0.0.1 cache and the output changes to what one would expect. If the sysctl is not set, the following output would be expected when p8p1 is down: default via 10.0.5.2 dev p9p1 10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15 70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1 80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 linkdown 90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 linkdown 90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2 Since the dead flag does not appear, there should be no expectation that the kernel would skip using this route due to link being down. v2: Split kernel changes into 2 patches, this actually makes a behavioral change if the sysctl is set. Also took suggestion from Alex to simplify code by only checking sysctl during fib lookup and suggestion from Scott to add a per-interface sysctl. v3: Code clean-ups to make it more readable and efficient as well as a reverse path check fix. v4: Drop binary sysctl v5: Whitespace fixups from Dave v6: Style changes from Dave and checkpatch suggestions v7: One more checkpatch fixup Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23 13:45:37 -04:00
ipv4: Update exception handling for multipath routes via same device Kfir reported that pmtu exceptions are not created properly for deployments where multipath routes use the same device. After some digging I see 2 compounding problems: 1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after* the route lookup. This is the second use case where this has been a problem (the first is related to use of vti devices with VRF). I can not find any reason for the oif to be changed after the lookup; the code goes back to the start of git. It does not seem logical so remove it. 2. fib_lookups for exceptions do not call fib_select_path to handle multipath route selection based on the hash. The end result is that the fib_lookup used to add the exception always creates it based using the first leg of the route. An example topology showing the problem: | host1 +------+ | eth0 | .209 +------+ | +------+ switch | br0 | +------+ | +---------+---------+ | host2 | host3 +------+ +------+ | eth0 | .250 | eth0 | 192.168.252.252 +------+ +------+ +-----+ +-----+ | vti | .2 | vti | 192.168.247.3 +-----+ +-----+ \ / ================================= tunnels 192.168.247.1/24 for h in host1 host2 host3; do ip netns add ${h} ip -netns ${h} link set lo up ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1 done ip netns add switch ip -netns switch li set lo up ip -netns switch link add br0 type bridge stp 0 ip -netns switch link set br0 up for n in 1 2 3; do ip -netns switch link add eth-sw type veth peer name eth-h${n} ip -netns switch li set eth-h${n} master br0 up ip -netns switch li set eth-sw netns host${n} name eth0 done ip -netns host1 addr add 192.168.252.209/24 dev eth0 ip -netns host1 link set dev eth0 up ip -netns host1 route add 192.168.247.0/24 \ nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0 ip -netns host2 addr add 192.168.252.250/24 dev eth0 ip -netns host2 link set dev eth0 up ip -netns host2 addr add 192.168.252.252/24 dev eth0 ip -netns host3 link set dev eth0 up ip netns add tunnel ip -netns tunnel li set lo up ip -netns tunnel li add br0 type bridge ip -netns tunnel li set br0 up for n in $(seq 11 20); do ip -netns tunnel addr add dev br0 192.168.247.${n}/24 done for n in 2 3 do ip -netns tunnel link add vti${n} type veth peer name eth${n} ip -netns tunnel link set eth${n} mtu 1360 master br0 up ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24 done ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15 ip -netns host1 ro ls cache Before this patch the cache always shows exceptions against the first leg in the multipath route; 192.168.252.250 per this example. Since the hash has an initial random seed, you may need to vary the final octet more than what is listed. In my tests, using addresses between 11 and 19 usually found 1 that used both legs. With this patch, the cache will have exceptions for both legs. Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions") Reported-by: Kfir Itzhak <mastertheknife@gmail.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 21:03:54 -06:00
ipv4: Update exception handling for multipath routes via same device Kfir reported that pmtu exceptions are not created properly for deployments where multipath routes use the same device. After some digging I see 2 compounding problems: 1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after* the route lookup. This is the second use case where this has been a problem (the first is related to use of vti devices with VRF). I can not find any reason for the oif to be changed after the lookup; the code goes back to the start of git. It does not seem logical so remove it. 2. fib_lookups for exceptions do not call fib_select_path to handle multipath route selection based on the hash. The end result is that the fib_lookup used to add the exception always creates it based using the first leg of the route. An example topology showing the problem: | host1 +------+ | eth0 | .209 +------+ | +------+ switch | br0 | +------+ | +---------+---------+ | host2 | host3 +------+ +------+ | eth0 | .250 | eth0 | 192.168.252.252 +------+ +------+ +-----+ +-----+ | vti | .2 | vti | 192.168.247.3 +-----+ +-----+ \ / ================================= tunnels 192.168.247.1/24 for h in host1 host2 host3; do ip netns add ${h} ip -netns ${h} link set lo up ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1 done ip netns add switch ip -netns switch li set lo up ip -netns switch link add br0 type bridge stp 0 ip -netns switch link set br0 up for n in 1 2 3; do ip -netns switch link add eth-sw type veth peer name eth-h${n} ip -netns switch li set eth-h${n} master br0 up ip -netns switch li set eth-sw netns host${n} name eth0 done ip -netns host1 addr add 192.168.252.209/24 dev eth0 ip -netns host1 link set dev eth0 up ip -netns host1 route add 192.168.247.0/24 \ nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0 ip -netns host2 addr add 192.168.252.250/24 dev eth0 ip -netns host2 link set dev eth0 up ip -netns host2 addr add 192.168.252.252/24 dev eth0 ip -netns host3 link set dev eth0 up ip netns add tunnel ip -netns tunnel li set lo up ip -netns tunnel li add br0 type bridge ip -netns tunnel li set br0 up for n in $(seq 11 20); do ip -netns tunnel addr add dev br0 192.168.247.${n}/24 done for n in 2 3 do ip -netns tunnel link add vti${n} type veth peer name eth${n} ip -netns tunnel link set eth${n} mtu 1360 master br0 up ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24 done ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15 ip -netns host1 ro ls cache Before this patch the cache always shows exceptions against the first leg in the multipath route; 192.168.252.250 per this example. Since the hash has an initial random seed, you may need to vary the final octet more than what is listed. In my tests, using addresses between 11 and 19 usually found 1 that used both legs. With this patch, the cache will have exceptions for both legs. Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions") Reported-by: Kfir Itzhak <mastertheknife@gmail.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 21:03:54 -06:00
ipv4: Update exception handling for multipath routes via same device Kfir reported that pmtu exceptions are not created properly for deployments where multipath routes use the same device. After some digging I see 2 compounding problems: 1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after* the route lookup. This is the second use case where this has been a problem (the first is related to use of vti devices with VRF). I can not find any reason for the oif to be changed after the lookup; the code goes back to the start of git. It does not seem logical so remove it. 2. fib_lookups for exceptions do not call fib_select_path to handle multipath route selection based on the hash. The end result is that the fib_lookup used to add the exception always creates it based using the first leg of the route. An example topology showing the problem: | host1 +------+ | eth0 | .209 +------+ | +------+ switch | br0 | +------+ | +---------+---------+ | host2 | host3 +------+ +------+ | eth0 | .250 | eth0 | 192.168.252.252 +------+ +------+ +-----+ +-----+ | vti | .2 | vti | 192.168.247.3 +-----+ +-----+ \ / ================================= tunnels 192.168.247.1/24 for h in host1 host2 host3; do ip netns add ${h} ip -netns ${h} link set lo up ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1 done ip netns add switch ip -netns switch li set lo up ip -netns switch link add br0 type bridge stp 0 ip -netns switch link set br0 up for n in 1 2 3; do ip -netns switch link add eth-sw type veth peer name eth-h${n} ip -netns switch li set eth-h${n} master br0 up ip -netns switch li set eth-sw netns host${n} name eth0 done ip -netns host1 addr add 192.168.252.209/24 dev eth0 ip -netns host1 link set dev eth0 up ip -netns host1 route add 192.168.247.0/24 \ nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0 ip -netns host2 addr add 192.168.252.250/24 dev eth0 ip -netns host2 link set dev eth0 up ip -netns host2 addr add 192.168.252.252/24 dev eth0 ip -netns host3 link set dev eth0 up ip netns add tunnel ip -netns tunnel li set lo up ip -netns tunnel li add br0 type bridge ip -netns tunnel li set br0 up for n in $(seq 11 20); do ip -netns tunnel addr add dev br0 192.168.247.${n}/24 done for n in 2 3 do ip -netns tunnel link add vti${n} type veth peer name eth${n} ip -netns tunnel link set eth${n} mtu 1360 master br0 up ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24 done ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15 ip -netns host1 ro ls cache Before this patch the cache always shows exceptions against the first leg in the multipath route; 192.168.252.250 per this example. Since the hash has an initial random seed, you may need to vary the final octet more than what is listed. In my tests, using addresses between 11 and 19 usually found 1 that used both legs. With this patch, the cache will have exceptions for both legs. Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions") Reported-by: Kfir Itzhak <mastertheknife@gmail.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 21:03:54 -06:00
ipv4: Update exception handling for multipath routes via same device Kfir reported that pmtu exceptions are not created properly for deployments where multipath routes use the same device. After some digging I see 2 compounding problems: 1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after* the route lookup. This is the second use case where this has been a problem (the first is related to use of vti devices with VRF). I can not find any reason for the oif to be changed after the lookup; the code goes back to the start of git. It does not seem logical so remove it. 2. fib_lookups for exceptions do not call fib_select_path to handle multipath route selection based on the hash. The end result is that the fib_lookup used to add the exception always creates it based using the first leg of the route. An example topology showing the problem: | host1 +------+ | eth0 | .209 +------+ | +------+ switch | br0 | +------+ | +---------+---------+ | host2 | host3 +------+ +------+ | eth0 | .250 | eth0 | 192.168.252.252 +------+ +------+ +-----+ +-----+ | vti | .2 | vti | 192.168.247.3 +-----+ +-----+ \ / ================================= tunnels 192.168.247.1/24 for h in host1 host2 host3; do ip netns add ${h} ip -netns ${h} link set lo up ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1 done ip netns add switch ip -netns switch li set lo up ip -netns switch link add br0 type bridge stp 0 ip -netns switch link set br0 up for n in 1 2 3; do ip -netns switch link add eth-sw type veth peer name eth-h${n} ip -netns switch li set eth-h${n} master br0 up ip -netns switch li set eth-sw netns host${n} name eth0 done ip -netns host1 addr add 192.168.252.209/24 dev eth0 ip -netns host1 link set dev eth0 up ip -netns host1 route add 192.168.247.0/24 \ nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0 ip -netns host2 addr add 192.168.252.250/24 dev eth0 ip -netns host2 link set dev eth0 up ip -netns host2 addr add 192.168.252.252/24 dev eth0 ip -netns host3 link set dev eth0 up ip netns add tunnel ip -netns tunnel li set lo up ip -netns tunnel li add br0 type bridge ip -netns tunnel li set br0 up for n in $(seq 11 20); do ip -netns tunnel addr add dev br0 192.168.247.${n}/24 done for n in 2 3 do ip -netns tunnel link add vti${n} type veth peer name eth${n} ip -netns tunnel link set eth${n} mtu 1360 master br0 up ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24 done ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15 ip -netns host1 ro ls cache Before this patch the cache always shows exceptions against the first leg in the multipath route; 192.168.252.250 per this example. Since the hash has an initial random seed, you may need to vary the final octet more than what is listed. In my tests, using addresses between 11 and 19 usually found 1 that used both legs. With this patch, the cache will have exceptions for both legs. Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions") Reported-by: Kfir Itzhak <mastertheknife@gmail.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 21:03:54 -06:00
net: ipv4: Cache pmtu for all packet paths if multipath enabled Check number of paths by fib_info_num_path(), and update_or_create_fnhe() for every path. Problem is that pmtu is cached only for the oif that has received icmp message "need to frag", other oifs will still try to use "default" iface mtu. An example topology showing the problem: | host1 +---------+ | dummy0 | 10.179.20.18/32 mtu9000 +---------+ +-----------+----------------+ +---------+ +---------+ | ens17f0 | 10.179.2.141/31 | ens17f1 | 10.179.2.13/31 +---------+ +---------+ | (all here have mtu 9000) | +------+ +------+ | ro1 | 10.179.2.140/31 | ro2 | 10.179.2.12/31 +------+ +------+ | | ---------+------------+-------------------+------ | +-----+ | ro3 | 10.10.10.10 mtu1500 +-----+ | ======================================== some networks ======================================== | +-----+ | eth0| 10.10.30.30 mtu9000 +-----+ | host2 host1 have enabled multipath and sysctl net.ipv4.fib_multipath_hash_policy = 1: default proto static src 10.179.20.18 nexthop via 10.179.2.12 dev ens17f1 weight 1 nexthop via 10.179.2.140 dev ens17f0 weight 1 When host1 tries to do pmtud from 10.179.20.18/32 to host2, host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500. And host1 caches it in nexthop exceptions cache. Problem is that it is cached only for the iface that has received icmp, and there is no way that ro3 will send icmp msg to host1 via another path. Host1 now have this routes to host2: ip r g 10.10.30.30 sport 30000 dport 443 10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0 cache expires 521sec mtu 1500 ip r g 10.10.30.30 sport 30033 dport 443 10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0 cache So when host1 tries again to reach host2 with mtu>1500, if packet flow is lucky enough to be hashed with oif=ens17f1 its ok, if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1, until lucky day when ro3 will send it through another flow to ens17f0. Signed-off-by: Vladimir Vdovin <deliran@verdict.gg> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-08 09:34:24 +00:00
net: ipv4: Cache pmtu for all packet paths if multipath enabled Check number of paths by fib_info_num_path(), and update_or_create_fnhe() for every path. Problem is that pmtu is cached only for the oif that has received icmp message "need to frag", other oifs will still try to use "default" iface mtu. An example topology showing the problem: | host1 +---------+ | dummy0 | 10.179.20.18/32 mtu9000 +---------+ +-----------+----------------+ +---------+ +---------+ | ens17f0 | 10.179.2.141/31 | ens17f1 | 10.179.2.13/31 +---------+ +---------+ | (all here have mtu 9000) | +------+ +------+ | ro1 | 10.179.2.140/31 | ro2 | 10.179.2.12/31 +------+ +------+ | | ---------+------------+-------------------+------ | +-----+ | ro3 | 10.10.10.10 mtu1500 +-----+ | ======================================== some networks ======================================== | +-----+ | eth0| 10.10.30.30 mtu9000 +-----+ | host2 host1 have enabled multipath and sysctl net.ipv4.fib_multipath_hash_policy = 1: default proto static src 10.179.20.18 nexthop via 10.179.2.12 dev ens17f1 weight 1 nexthop via 10.179.2.140 dev ens17f0 weight 1 When host1 tries to do pmtud from 10.179.20.18/32 to host2, host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500. And host1 caches it in nexthop exceptions cache. Problem is that it is cached only for the iface that has received icmp, and there is no way that ro3 will send icmp msg to host1 via another path. Host1 now have this routes to host2: ip r g 10.10.30.30 sport 30000 dport 443 10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0 cache expires 521sec mtu 1500 ip r g 10.10.30.30 sport 30033 dport 443 10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0 cache So when host1 tries again to reach host2 with mtu>1500, if packet flow is lucky enough to be hashed with oif=ens17f1 its ok, if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1, until lucky day when ro3 will send it through another flow to ens17f0. Signed-off-by: Vladimir Vdovin <deliran@verdict.gg> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-08 09:34:24 +00:00
ipv4: Update exception handling for multipath routes via same device Kfir reported that pmtu exceptions are not created properly for deployments where multipath routes use the same device. After some digging I see 2 compounding problems: 1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after* the route lookup. This is the second use case where this has been a problem (the first is related to use of vti devices with VRF). I can not find any reason for the oif to be changed after the lookup; the code goes back to the start of git. It does not seem logical so remove it. 2. fib_lookups for exceptions do not call fib_select_path to handle multipath route selection based on the hash. The end result is that the fib_lookup used to add the exception always creates it based using the first leg of the route. An example topology showing the problem: | host1 +------+ | eth0 | .209 +------+ | +------+ switch | br0 | +------+ | +---------+---------+ | host2 | host3 +------+ +------+ | eth0 | .250 | eth0 | 192.168.252.252 +------+ +------+ +-----+ +-----+ | vti | .2 | vti | 192.168.247.3 +-----+ +-----+ \ / ================================= tunnels 192.168.247.1/24 for h in host1 host2 host3; do ip netns add ${h} ip -netns ${h} link set lo up ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1 done ip netns add switch ip -netns switch li set lo up ip -netns switch link add br0 type bridge stp 0 ip -netns switch link set br0 up for n in 1 2 3; do ip -netns switch link add eth-sw type veth peer name eth-h${n} ip -netns switch li set eth-h${n} master br0 up ip -netns switch li set eth-sw netns host${n} name eth0 done ip -netns host1 addr add 192.168.252.209/24 dev eth0 ip -netns host1 link set dev eth0 up ip -netns host1 route add 192.168.247.0/24 \ nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0 ip -netns host2 addr add 192.168.252.250/24 dev eth0 ip -netns host2 link set dev eth0 up ip -netns host2 addr add 192.168.252.252/24 dev eth0 ip -netns host3 link set dev eth0 up ip netns add tunnel ip -netns tunnel li set lo up ip -netns tunnel li add br0 type bridge ip -netns tunnel li set br0 up for n in $(seq 11 20); do ip -netns tunnel addr add dev br0 192.168.247.${n}/24 done for n in 2 3 do ip -netns tunnel link add vti${n} type veth peer name eth${n} ip -netns tunnel link set eth${n} mtu 1360 master br0 up ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24 done ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15 ip -netns host1 ro ls cache Before this patch the cache always shows exceptions against the first leg in the multipath route; 192.168.252.250 per this example. Since the hash has an initial random seed, you may need to vary the final octet more than what is listed. In my tests, using addresses between 11 and 19 usually found 1 that used both legs. With this patch, the cache will have exceptions for both legs. Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions") Reported-by: Kfir Itzhak <mastertheknife@gmail.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14 21:03:54 -06:00
ipv4: must use rcu protection while calling fib_lookup Following lockdep splat was reported by Pavel Roskin : [ 1570.586223] =============================== [ 1570.586225] [ INFO: suspicious RCU usage. ] [ 1570.586228] 3.6.0-rc3-wl-main #98 Not tainted [ 1570.586229] ------------------------------- [ 1570.586231] /home/proski/src/linux/net/ipv4/route.c:645 suspicious rcu_dereference_check() usage! [ 1570.586233] [ 1570.586233] other info that might help us debug this: [ 1570.586233] [ 1570.586236] [ 1570.586236] rcu_scheduler_active = 1, debug_locks = 0 [ 1570.586238] 2 locks held by Chrome_IOThread/4467: [ 1570.586240] #0: (slock-AF_INET){+.-...}, at: [<ffffffff814f2c0c>] release_sock+0x2c/0xa0 [ 1570.586253] #1: (fnhe_lock){+.-...}, at: [<ffffffff815302fc>] update_or_create_fnhe+0x2c/0x270 [ 1570.586260] [ 1570.586260] stack backtrace: [ 1570.586263] Pid: 4467, comm: Chrome_IOThread Not tainted 3.6.0-rc3-wl-main #98 [ 1570.586265] Call Trace: [ 1570.586271] [<ffffffff810976ed>] lockdep_rcu_suspicious+0xfd/0x130 [ 1570.586275] [<ffffffff8153042c>] update_or_create_fnhe+0x15c/0x270 [ 1570.586278] [<ffffffff815305b3>] __ip_rt_update_pmtu+0x73/0xb0 [ 1570.586282] [<ffffffff81530619>] ip_rt_update_pmtu+0x29/0x90 [ 1570.586285] [<ffffffff815411dc>] inet_csk_update_pmtu+0x2c/0x80 [ 1570.586290] [<ffffffff81558d1e>] tcp_v4_mtu_reduced+0x2e/0xc0 [ 1570.586293] [<ffffffff81553bc4>] tcp_release_cb+0xa4/0xb0 [ 1570.586296] [<ffffffff814f2c35>] release_sock+0x55/0xa0 [ 1570.586300] [<ffffffff815442ef>] tcp_sendmsg+0x4af/0xf50 [ 1570.586305] [<ffffffff8156fc60>] inet_sendmsg+0x120/0x230 [ 1570.586308] [<ffffffff8156fb40>] ? inet_sk_rebuild_header+0x40/0x40 [ 1570.586312] [<ffffffff814f4bdd>] ? sock_update_classid+0xbd/0x3b0 [ 1570.586315] [<ffffffff814f4c50>] ? sock_update_classid+0x130/0x3b0 [ 1570.586320] [<ffffffff814ec435>] do_sock_write+0xc5/0xe0 [ 1570.586323] [<ffffffff814ec4a3>] sock_aio_write+0x53/0x80 [ 1570.586328] [<ffffffff8114bc83>] do_sync_write+0xa3/0xe0 [ 1570.586332] [<ffffffff8114c5a5>] vfs_write+0x165/0x180 [ 1570.586335] [<ffffffff8114c805>] sys_write+0x45/0x90 [ 1570.586340] [<ffffffff815d2722>] system_call_fastpath+0x16/0x1b Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Pavel Roskin <proski@gnu.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-28 12:33:07 +00:00
net: add bool confirm_neigh parameter for dst_ops.update_pmtu The MTU update code is supposed to be invoked in response to real networking events that update the PMTU. In IPv6 PMTU update function __ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor confirmed time. But for tunnel code, it will call pmtu before xmit, like: - tnl_update_pmtu() - skb_dst_update_pmtu() - ip6_rt_update_pmtu() - __ip6_rt_update_pmtu() - dst_confirm_neigh() If the tunnel remote dst mac address changed and we still do the neigh confirm, we will not be able to update neigh cache and ping6 remote will failed. So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we should not be invoking dst_confirm_neigh() as we have no evidence of successful two-way communication at this point. On the other hand it is also important to keep the neigh reachability fresh for TCP flows, so we cannot remove this dst_confirm_neigh() call. To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu to choose whether we should do neigh update or not. I will add the parameter in this patch and set all the callers to true to comply with the previous way, and fix the tunnel code one by one on later patches. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Suggested-by: David Miller <davem@davemloft.net> Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22 10:51:09 +08:00
ipv4: introduce new IP_MTU_DISCOVER mode IP_PMTUDISC_INTERFACE Sockets marked with IP_PMTUDISC_INTERFACE won't do path mtu discovery, their sockets won't accept and install new path mtu information and they will always use the interface mtu for outgoing packets. It is guaranteed that the packet is not fragmented locally. But we won't set the DF-Flag on the outgoing frames. Florian Weimer had the idea to use this flag to ensure DNS servers are never generating outgoing fragments. They may well be fragmented on the path, but the server never stores or usees path mtu values, which could well be forged in an attack. (The root of the problem with path MTU discovery is that there is no reliable way to authenticate ICMP Fragmentation Needed But DF Set messages because they are sent from intermediate routers with their source addresses, and the IMCP payload will not always contain sufficient information to identify a flow.) Recent research in the DNS community showed that it is possible to implement an attack where DNS cache poisoning is feasible by spoofing fragments. This work was done by Amir Herzberg and Haya Shulman: <https://sites.google.com/site/hayashulman/files/fragmentation-poisoning.pdf> This issue was previously discussed among the DNS community, e.g. <http://www.ietf.org/mail-archive/web/dnsext/current/msg01204.html>, without leading to fixes. This patch depends on the patch "ipv4: fix DO and PROBE pmtu mode regarding local fragmentation with UFO/CORK" for the enforcement of the non-fragmentable checks. If other users than ip_append_page/data should use this semantic too, we have to add a new flag to IPCB(skb)->flags to suppress local fragmentation and check for this in ip_finish_output. Many thanks to Florian Weimer for the idea and feedback while implementing this patch. Cc: David S. Miller <davem@davemloft.net> Suggested-by: Florian Weimer <fweimer@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-05 02:24:17 +01:00
ipv4: add sanity checks in ipv4_link_failure() Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 08:04:05 -07:00
ipv4: icmp: Pass IPv4 control block structure as an argument to __icmp_send() __icmp_send() is used to generate ICMP error messages in response to various situations such as MTU errors (i.e., "Fragmentation Required") and too many hops (i.e., "Time Exceeded"). The skb that generated the error does not necessarily come from the IPv4 layer and does not always have a valid IPv4 control block in skb->cb. Therefore, commit 9ef6b42ad6fd ("net: Add __icmp_send helper.") changed the function to take the IP options structure as argument instead of deriving it from the skb's control block. Some callers of this function such as icmp_send() pass the IP options structure from the skb's control block as in these call paths the control block is known to be valid, but other callers simply pass a zeroed structure. A subsequent patch will need __icmp_send() to access more information from the IPv4 control block (specifically, the ifindex of the input interface). As a preparation for this change, change the function to take the IPv4 control block structure as an argument instead of the IP options structure. This makes the function similar to its IPv6 counterpart that already takes the IPv6 control block structure as an argument. No functional changes intended. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250908073238.119240-3-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-08 10:32:32 +03:00
ipv4: ensure rcu_read_lock() in ipv4_link_failure() fib_compute_spec_dst() needs to be called under rcu protection. syzbot reported : WARNING: suspicious RCU usage 5.1.0-rc4+ #165 Not tainted include/linux/inetdevice.h:220 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by swapper/0/0: #0: 0000000051b67925 ((&n->timer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:170 [inline] #0: 0000000051b67925 ((&n->timer)){+.-.}, at: call_timer_fn+0xda/0x720 kernel/time/timer.c:1315 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-rc4+ #165 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5162 __in_dev_get_rcu include/linux/inetdevice.h:220 [inline] fib_compute_spec_dst+0xbbd/0x1030 net/ipv4/fib_frontend.c:294 spec_dst_fill net/ipv4/ip_options.c:245 [inline] __ip_options_compile+0x15a7/0x1a10 net/ipv4/ip_options.c:343 ipv4_link_failure+0x172/0x400 net/ipv4/route.c:1195 dst_link_failure include/net/dst.h:427 [inline] arp_error_report+0xd1/0x1c0 net/ipv4/arp.c:297 neigh_invalidate+0x24b/0x570 net/core/neighbour.c:995 neigh_timer_handler+0xc35/0xf30 net/core/neighbour.c:1081 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 invoke_softirq kernel/softirq.c:374 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:414 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-13 17:32:21 -07:00
ipv4: add sanity checks in ipv4_link_failure() Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 08:04:05 -07:00
ipv4: add sanity checks in ipv4_link_failure() Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 08:04:05 -07:00
ipv4: icmp: Pass IPv4 control block structure as an argument to __icmp_send() __icmp_send() is used to generate ICMP error messages in response to various situations such as MTU errors (i.e., "Fragmentation Required") and too many hops (i.e., "Time Exceeded"). The skb that generated the error does not necessarily come from the IPv4 layer and does not always have a valid IPv4 control block in skb->cb. Therefore, commit 9ef6b42ad6fd ("net: Add __icmp_send helper.") changed the function to take the IP options structure as argument instead of deriving it from the skb's control block. Some callers of this function such as icmp_send() pass the IP options structure from the skb's control block as in these call paths the control block is known to be valid, but other callers simply pass a zeroed structure. A subsequent patch will need __icmp_send() to access more information from the IPv4 control block (specifically, the ifindex of the input interface). As a preparation for this change, change the function to take the IPv4 control block structure as an argument instead of the IP options structure. This makes the function similar to its IPv6 counterpart that already takes the IPv6 control block structure as an argument. No functional changes intended. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250908073238.119240-3-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-08 10:32:32 +03:00
ipv4: add sanity checks in ipv4_link_failure() Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 08:04:05 -07:00
ipv4: icmp: Pass IPv4 control block structure as an argument to __icmp_send() __icmp_send() is used to generate ICMP error messages in response to various situations such as MTU errors (i.e., "Fragmentation Required") and too many hops (i.e., "Time Exceeded"). The skb that generated the error does not necessarily come from the IPv4 layer and does not always have a valid IPv4 control block in skb->cb. Therefore, commit 9ef6b42ad6fd ("net: Add __icmp_send helper.") changed the function to take the IP options structure as argument instead of deriving it from the skb's control block. Some callers of this function such as icmp_send() pass the IP options structure from the skb's control block as in these call paths the control block is known to be valid, but other callers simply pass a zeroed structure. A subsequent patch will need __icmp_send() to access more information from the IPv4 control block (specifically, the ifindex of the input interface). As a preparation for this change, change the function to take the IPv4 control block structure as an argument instead of the IP options structure. This makes the function similar to its IPv6 counterpart that already takes the IPv6 control block structure as an argument. No functional changes intended. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250908073238.119240-3-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-08 10:32:32 +03:00
ipv4: add sanity checks in ipv4_link_failure() Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 08:04:05 -07:00
ipv4: icmp: Pass IPv4 control block structure as an argument to __icmp_send() __icmp_send() is used to generate ICMP error messages in response to various situations such as MTU errors (i.e., "Fragmentation Required") and too many hops (i.e., "Time Exceeded"). The skb that generated the error does not necessarily come from the IPv4 layer and does not always have a valid IPv4 control block in skb->cb. Therefore, commit 9ef6b42ad6fd ("net: Add __icmp_send helper.") changed the function to take the IP options structure as argument instead of deriving it from the skb's control block. Some callers of this function such as icmp_send() pass the IP options structure from the skb's control block as in these call paths the control block is known to be valid, but other callers simply pass a zeroed structure. A subsequent patch will need __icmp_send() to access more information from the IPv4 control block (specifically, the ifindex of the input interface). As a preparation for this change, change the function to take the IPv4 control block structure as an argument instead of the IP options structure. This makes the function similar to its IPv6 counterpart that already takes the IPv6 control block structure as an argument. No functional changes intended. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250908073238.119240-3-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-08 10:32:32 +03:00
ipv4: add sanity checks in ipv4_link_failure() Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 08:04:05 -07:00
ipv4: icmp: Pass IPv4 control block structure as an argument to __icmp_send() __icmp_send() is used to generate ICMP error messages in response to various situations such as MTU errors (i.e., "Fragmentation Required") and too many hops (i.e., "Time Exceeded"). The skb that generated the error does not necessarily come from the IPv4 layer and does not always have a valid IPv4 control block in skb->cb. Therefore, commit 9ef6b42ad6fd ("net: Add __icmp_send helper.") changed the function to take the IP options structure as argument instead of deriving it from the skb's control block. Some callers of this function such as icmp_send() pass the IP options structure from the skb's control block as in these call paths the control block is known to be valid, but other callers simply pass a zeroed structure. A subsequent patch will need __icmp_send() to access more information from the IPv4 control block (specifically, the ifindex of the input interface). As a preparation for this change, change the function to take the IPv4 control block structure as an argument instead of the IP options structure. This makes the function similar to its IPv6 counterpart that already takes the IPv6 control block structure as an argument. No functional changes intended. Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250908073238.119240-3-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-08 10:32:32 +03:00
ipv4: add sanity checks in ipv4_link_failure() Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24 08:04:05 -07:00
fib: RCU conversion of fib_lookup() fib_lookup() converted to be called in RCU protected context, no reference taken and released on a contended cache line (fib_clntref) fib_table_lookup() and fib_semantic_match() get an additional parameter. struct fib_info gets an rcu_head field, and is freed after an rcu grace period. Stress test : (Sending 160.000.000 UDP frames on same neighbour, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_HASH) (about same results for FIB_TRIE) Before patch : real 1m31.199s user 0m13.761s sys 23m24.780s After patch: real 1m5.375s user 0m14.997s sys 15m50.115s Before patch Profile : 13044.00 15.4% __ip_route_output_key vmlinux 8438.00 10.0% dst_destroy vmlinux 5983.00 7.1% fib_semantic_match vmlinux 5410.00 6.4% fib_rules_lookup vmlinux 4803.00 5.7% neigh_lookup vmlinux 4420.00 5.2% _raw_spin_lock vmlinux 3883.00 4.6% rt_set_nexthop vmlinux 3261.00 3.9% _raw_read_lock vmlinux 2794.00 3.3% fib_table_lookup vmlinux 2374.00 2.8% neigh_resolve_output vmlinux 2153.00 2.5% dst_alloc vmlinux 1502.00 1.8% _raw_read_lock_bh vmlinux 1484.00 1.8% kmem_cache_alloc vmlinux 1407.00 1.7% eth_header vmlinux 1406.00 1.7% ipv4_dst_destroy vmlinux 1298.00 1.5% __copy_from_user_ll vmlinux 1174.00 1.4% dev_queue_xmit vmlinux 1000.00 1.2% ip_output vmlinux After patch Profile : 13712.00 15.8% dst_destroy vmlinux 8548.00 9.9% __ip_route_output_key vmlinux 7017.00 8.1% neigh_lookup vmlinux 4554.00 5.3% fib_semantic_match vmlinux 4067.00 4.7% _raw_read_lock vmlinux 3491.00 4.0% dst_alloc vmlinux 3186.00 3.7% neigh_resolve_output vmlinux 3103.00 3.6% fib_table_lookup vmlinux 2098.00 2.4% _raw_read_lock_bh vmlinux 2081.00 2.4% kmem_cache_alloc vmlinux 2013.00 2.3% _raw_spin_lock vmlinux 1763.00 2.0% __copy_from_user_ll vmlinux 1763.00 2.0% ip_output vmlinux 1761.00 2.0% ipv4_dst_destroy vmlinux 1631.00 1.9% eth_header vmlinux 1440.00 1.7% _raw_read_unlock_bh vmlinux Reference results, if IP route cache is enabled : real 0m29.718s user 0m10.845s sys 7m37.341s 25213.00 29.5% __ip_route_output_key vmlinux 9011.00 10.5% dst_release vmlinux 4817.00 5.6% ip_push_pending_frames vmlinux 4232.00 5.0% ip_finish_output vmlinux 3940.00 4.6% udp_sendmsg vmlinux 3730.00 4.4% __copy_from_user_ll vmlinux 3716.00 4.4% ip_route_output_flow vmlinux 2451.00 2.9% __xfrm_lookup vmlinux 2221.00 2.6% ip_append_data vmlinux 1718.00 2.0% _raw_spin_lock_bh vmlinux 1655.00 1.9% __alloc_skb vmlinux 1572.00 1.8% sock_wfree vmlinux 1345.00 1.6% kfree vmlinux Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 10:41:36 +00:00
ipv4: Convert ->flowi4_tos to dscp_t. Convert the ->flowic_tos field of struct flowi_common from __u8 to dscp_t, rename it ->flowic_dscp and propagate these changes to struct flowi and struct flowi4. We've had several bugs in the past where ECN bits could interfere with IPv4 routing, because these bits were not properly cleared when setting ->flowi4_tos. These bugs should be fixed now and the dscp_t type has been introduced to ensure that variables carrying DSCP values don't accidentally have any ECN bits set. Several variables and structure fields have been converted to dscp_t already, but the main IPv4 routing structure, struct flowi4, is still using a __u8. To avoid any future regression, this patch converts it to dscp_t. There are many users to convert at once. Fortunately, around half of ->flowi4_tos users already have a dscp_t value at hand, which they currently convert to __u8 using inet_dscp_to_dsfield(). For all of these users, we just need to drop that conversion. But, although we try to do the __u8 <-> dscp_t conversions at the boundaries of the network or of user space, some places still store TOS/DSCP variables as __u8 in core networking code. Those can hardly be converted either because the data structure is part of UAPI or because the same variable or field is also used for handling ECN in other parts of the code. In all of these cases where we don't have a dscp_t variable at hand, we need to use inet_dsfield_to_dscp() when interacting with ->flowi4_dscp. Changes since v1: * Fix space alignment in __bpf_redirect_neigh_v4() (Ido). Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/29acecb45e911d17446b9a3dbdb1ab7b821ea371.1756128932.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-25 15:37:43 +02:00
fib: RCU conversion of fib_lookup() fib_lookup() converted to be called in RCU protected context, no reference taken and released on a contended cache line (fib_clntref) fib_table_lookup() and fib_semantic_match() get an additional parameter. struct fib_info gets an rcu_head field, and is freed after an rcu grace period. Stress test : (Sending 160.000.000 UDP frames on same neighbour, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_HASH) (about same results for FIB_TRIE) Before patch : real 1m31.199s user 0m13.761s sys 23m24.780s After patch: real 1m5.375s user 0m14.997s sys 15m50.115s Before patch Profile : 13044.00 15.4% __ip_route_output_key vmlinux 8438.00 10.0% dst_destroy vmlinux 5983.00 7.1% fib_semantic_match vmlinux 5410.00 6.4% fib_rules_lookup vmlinux 4803.00 5.7% neigh_lookup vmlinux 4420.00 5.2% _raw_spin_lock vmlinux 3883.00 4.6% rt_set_nexthop vmlinux 3261.00 3.9% _raw_read_lock vmlinux 2794.00 3.3% fib_table_lookup vmlinux 2374.00 2.8% neigh_resolve_output vmlinux 2153.00 2.5% dst_alloc vmlinux 1502.00 1.8% _raw_read_lock_bh vmlinux 1484.00 1.8% kmem_cache_alloc vmlinux 1407.00 1.7% eth_header vmlinux 1406.00 1.7% ipv4_dst_destroy vmlinux 1298.00 1.5% __copy_from_user_ll vmlinux 1174.00 1.4% dev_queue_xmit vmlinux 1000.00 1.2% ip_output vmlinux After patch Profile : 13712.00 15.8% dst_destroy vmlinux 8548.00 9.9% __ip_route_output_key vmlinux 7017.00 8.1% neigh_lookup vmlinux 4554.00 5.3% fib_semantic_match vmlinux 4067.00 4.7% _raw_read_lock vmlinux 3491.00 4.0% dst_alloc vmlinux 3186.00 3.7% neigh_resolve_output vmlinux 3103.00 3.6% fib_table_lookup vmlinux 2098.00 2.4% _raw_read_lock_bh vmlinux 2081.00 2.4% kmem_cache_alloc vmlinux 2013.00 2.3% _raw_spin_lock vmlinux 1763.00 2.0% __copy_from_user_ll vmlinux 1763.00 2.0% ip_output vmlinux 1761.00 2.0% ipv4_dst_destroy vmlinux 1631.00 1.9% eth_header vmlinux 1440.00 1.7% _raw_read_unlock_bh vmlinux Reference results, if IP route cache is enabled : real 0m29.718s user 0m10.845s sys 7m37.341s 25213.00 29.5% __ip_route_output_key vmlinux 9011.00 10.5% dst_release vmlinux 4817.00 5.6% ip_push_pending_frames vmlinux 4232.00 5.0% ip_finish_output vmlinux 3940.00 4.6% udp_sendmsg vmlinux 3730.00 4.4% __copy_from_user_ll vmlinux 3716.00 4.4% ip_route_output_flow vmlinux 2451.00 2.9% __xfrm_lookup vmlinux 2221.00 2.6% ip_append_data vmlinux 1718.00 2.0% _raw_spin_lock_bh vmlinux 1655.00 1.9% __alloc_skb vmlinux 1572.00 1.8% sock_wfree vmlinux 1345.00 1.6% kfree vmlinux Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 10:41:36 +00:00
net: ipv4 sysctl option to ignore routes when nexthop link is down This feature is only enabled with the new per-interface or ipv4 global sysctls called 'ignore_routes_with_linkdown'. net.ipv4.conf.all.ignore_routes_with_linkdown = 0 net.ipv4.conf.default.ignore_routes_with_linkdown = 0 net.ipv4.conf.lo.ignore_routes_with_linkdown = 0 ... When the above sysctls are set, will report to userspace that a route is dead and will no longer resolve to this nexthop when performing a fib lookup. This will signal to userspace that the route will not be selected. The signalling of a RTNH_F_DEAD is only passed to userspace if the sysctl is enabled and link is down. This was done as without it the netlink listeners would have no idea whether or not a nexthop would be selected. The kernel only sets RTNH_F_DEAD internally if the interface has IFF_UP cleared. With the new sysctl set, the following behavior can be observed (interface p8p1 is link-down): default via 10.0.5.2 dev p9p1 10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15 70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1 80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 dead linkdown 90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 dead linkdown 90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2 90.0.0.1 via 70.0.0.2 dev p7p1 src 70.0.0.1 cache local 80.0.0.1 dev lo src 80.0.0.1 cache <local> 80.0.0.2 via 10.0.5.2 dev p9p1 src 10.0.5.15 cache While the route does remain in the table (so it can be modified if needed rather than being wiped away as it would be if IFF_UP was cleared), the proper next-hop is chosen automatically when the link is down. Now interface p8p1 is linked-up: default via 10.0.5.2 dev p9p1 10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15 70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1 80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2 192.168.56.0/24 dev p2p1 proto kernel scope link src 192.168.56.2 90.0.0.1 via 80.0.0.2 dev p8p1 src 80.0.0.1 cache local 80.0.0.1 dev lo src 80.0.0.1 cache <local> 80.0.0.2 dev p8p1 src 80.0.0.1 cache and the output changes to what one would expect. If the sysctl is not set, the following output would be expected when p8p1 is down: default via 10.0.5.2 dev p9p1 10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15 70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1 80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 linkdown 90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 linkdown 90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2 Since the dead flag does not appear, there should be no expectation that the kernel would skip using this route due to link being down. v2: Split kernel changes into 2 patches, this actually makes a behavioral change if the sysctl is set. Also took suggestion from Alex to simplify code by only checking sysctl during fib lookup and suggestion from Scott to add a per-interface sysctl. v3: Code clean-ups to make it more readable and efficient as well as a reverse path check fix. v4: Drop binary sysctl v5: Whitespace fixups from Dave v6: Style changes from Dave and checkpatch suggestions v7: One more checkpatch fixup Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23 13:45:37 -04:00
fib: RCU conversion of fib_lookup() fib_lookup() converted to be called in RCU protected context, no reference taken and released on a contended cache line (fib_clntref) fib_table_lookup() and fib_semantic_match() get an additional parameter. struct fib_info gets an rcu_head field, and is freed after an rcu grace period. Stress test : (Sending 160.000.000 UDP frames on same neighbour, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_HASH) (about same results for FIB_TRIE) Before patch : real 1m31.199s user 0m13.761s sys 23m24.780s After patch: real 1m5.375s user 0m14.997s sys 15m50.115s Before patch Profile : 13044.00 15.4% __ip_route_output_key vmlinux 8438.00 10.0% dst_destroy vmlinux 5983.00 7.1% fib_semantic_match vmlinux 5410.00 6.4% fib_rules_lookup vmlinux 4803.00 5.7% neigh_lookup vmlinux 4420.00 5.2% _raw_spin_lock vmlinux 3883.00 4.6% rt_set_nexthop vmlinux 3261.00 3.9% _raw_read_lock vmlinux 2794.00 3.3% fib_table_lookup vmlinux 2374.00 2.8% neigh_resolve_output vmlinux 2153.00 2.5% dst_alloc vmlinux 1502.00 1.8% _raw_read_lock_bh vmlinux 1484.00 1.8% kmem_cache_alloc vmlinux 1407.00 1.7% eth_header vmlinux 1406.00 1.7% ipv4_dst_destroy vmlinux 1298.00 1.5% __copy_from_user_ll vmlinux 1174.00 1.4% dev_queue_xmit vmlinux 1000.00 1.2% ip_output vmlinux After patch Profile : 13712.00 15.8% dst_destroy vmlinux 8548.00 9.9% __ip_route_output_key vmlinux 7017.00 8.1% neigh_lookup vmlinux 4554.00 5.3% fib_semantic_match vmlinux 4067.00 4.7% _raw_read_lock vmlinux 3491.00 4.0% dst_alloc vmlinux 3186.00 3.7% neigh_resolve_output vmlinux 3103.00 3.6% fib_table_lookup vmlinux 2098.00 2.4% _raw_read_lock_bh vmlinux 2081.00 2.4% kmem_cache_alloc vmlinux 2013.00 2.3% _raw_spin_lock vmlinux 1763.00 2.0% __copy_from_user_ll vmlinux 1763.00 2.0% ip_output vmlinux 1761.00 2.0% ipv4_dst_destroy vmlinux 1631.00 1.9% eth_header vmlinux 1440.00 1.7% _raw_read_unlock_bh vmlinux Reference results, if IP route cache is enabled : real 0m29.718s user 0m10.845s sys 7m37.341s 25213.00 29.5% __ip_route_output_key vmlinux 9011.00 10.5% dst_release vmlinux 4817.00 5.6% ip_push_pending_frames vmlinux 4232.00 5.0% ip_finish_output vmlinux 3940.00 4.6% udp_sendmsg vmlinux 3730.00 4.4% __copy_from_user_ll vmlinux 3716.00 4.4% ip_route_output_flow vmlinux 2451.00 2.9% __xfrm_lookup vmlinux 2221.00 2.6% ip_append_data vmlinux 1718.00 2.0% _raw_spin_lock_bh vmlinux 1655.00 1.9% __alloc_skb vmlinux 1572.00 1.8% sock_wfree vmlinux 1345.00 1.6% kfree vmlinux Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 10:41:36 +00:00
fib: RCU conversion of fib_lookup() fib_lookup() converted to be called in RCU protected context, no reference taken and released on a contended cache line (fib_clntref) fib_table_lookup() and fib_semantic_match() get an additional parameter. struct fib_info gets an rcu_head field, and is freed after an rcu grace period. Stress test : (Sending 160.000.000 UDP frames on same neighbour, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_HASH) (about same results for FIB_TRIE) Before patch : real 1m31.199s user 0m13.761s sys 23m24.780s After patch: real 1m5.375s user 0m14.997s sys 15m50.115s Before patch Profile : 13044.00 15.4% __ip_route_output_key vmlinux 8438.00 10.0% dst_destroy vmlinux 5983.00 7.1% fib_semantic_match vmlinux 5410.00 6.4% fib_rules_lookup vmlinux 4803.00 5.7% neigh_lookup vmlinux 4420.00 5.2% _raw_spin_lock vmlinux 3883.00 4.6% rt_set_nexthop vmlinux 3261.00 3.9% _raw_read_lock vmlinux 2794.00 3.3% fib_table_lookup vmlinux 2374.00 2.8% neigh_resolve_output vmlinux 2153.00 2.5% dst_alloc vmlinux 1502.00 1.8% _raw_read_lock_bh vmlinux 1484.00 1.8% kmem_cache_alloc vmlinux 1407.00 1.7% eth_header vmlinux 1406.00 1.7% ipv4_dst_destroy vmlinux 1298.00 1.5% __copy_from_user_ll vmlinux 1174.00 1.4% dev_queue_xmit vmlinux 1000.00 1.2% ip_output vmlinux After patch Profile : 13712.00 15.8% dst_destroy vmlinux 8548.00 9.9% __ip_route_output_key vmlinux 7017.00 8.1% neigh_lookup vmlinux 4554.00 5.3% fib_semantic_match vmlinux 4067.00 4.7% _raw_read_lock vmlinux 3491.00 4.0% dst_alloc vmlinux 3186.00 3.7% neigh_resolve_output vmlinux 3103.00 3.6% fib_table_lookup vmlinux 2098.00 2.4% _raw_read_lock_bh vmlinux 2081.00 2.4% kmem_cache_alloc vmlinux 2013.00 2.3% _raw_spin_lock vmlinux 1763.00 2.0% __copy_from_user_ll vmlinux 1763.00 2.0% ip_output vmlinux 1761.00 2.0% ipv4_dst_destroy vmlinux 1631.00 1.9% eth_header vmlinux 1440.00 1.7% _raw_read_unlock_bh vmlinux Reference results, if IP route cache is enabled : real 0m29.718s user 0m10.845s sys 7m37.341s 25213.00 29.5% __ip_route_output_key vmlinux 9011.00 10.5% dst_release vmlinux 4817.00 5.6% ip_push_pending_frames vmlinux 4232.00 5.0% ip_finish_output vmlinux 3940.00 4.6% udp_sendmsg vmlinux 3730.00 4.4% __copy_from_user_ll vmlinux 3716.00 4.4% ip_route_output_flow vmlinux 2451.00 2.9% __xfrm_lookup vmlinux 2221.00 2.6% ip_append_data vmlinux 1718.00 2.0% _raw_spin_lock_bh vmlinux 1655.00 1.9% __alloc_skb vmlinux 1572.00 1.8% sock_wfree vmlinux 1345.00 1.6% kfree vmlinux Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 10:41:36 +00:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
ipv4: fix race condition between route lookup and invalidation Jesse and Ido reported the following race condition: <CPU A, t0> - Received packet A is forwarded and cached dst entry is taken from the nexthop ('nhc->nhc_rth_input'). Calls skb_dst_set() <t1> - Given Jesse has busy routers ("ingesting full BGP routing tables from multiple ISPs"), route is added / deleted and rt_cache_flush() is called <CPU B, t2> - Received packet B tries to use the same cached dst entry from t0, but rt_cache_valid() is no longer true and it is replaced in rt_cache_route() by the newer one. This calls dst_dev_put() on the original dst entry which assigns the blackhole netdev to 'dst->dev' <CPU A, t3> - dst_input(skb) is called on packet A and it is dropped due to 'dst->dev' being the blackhole netdev There are 2 issues in the v4 routing code: 1. A per-netns counter is used to do the validation of the route. That means whenever a route is changed in the netns, users of all routes in the netns needs to redo lookup. v6 has an implementation of only updating fn_sernum for routes that are affected. 2. When rt_cache_valid() returns false, rt_cache_route() is called to throw away the current cache, and create a new one. This seems unnecessary because as long as this route does not change, the route cache does not need to be recreated. To fully solve the above 2 issues, it probably needs quite some code changes and requires careful testing, and does not suite for net branch. So this patch only tries to add the deleted cached rt into the uncached list, so user could still be able to use it to receive packets until it's done. Fixes: 95c47f9cf5e0 ("ipv4: call dst_dev_put() properly") Signed-off-by: Wei Wang <weiwan@google.com> Reported-by: Ido Schimmel <idosch@idosch.org> Reported-by: Jesse Hathaway <jesse@mbuki-mvuki.org> Tested-by: Jesse Hathaway <jesse@mbuki-mvuki.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-16 12:03:15 -07:00
xfrm: reuse uncached_list to track xdsts In early time, when freeing a xdst, it would be inserted into dst_garbage.list first. Then if it's refcnt was still held somewhere, later it would be put into dst_busy_list in dst_gc_task(). When one dev was being unregistered, the dev of these dsts in dst_busy_list would be set with loopback_dev and put this dev. So that this dev's removal wouldn't get blocked, and avoid the kmsg warning: kernel:unregister_netdevice: waiting for veth0 to become \ free. Usage count = 2 However after Commit 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle"), the xdst will not be freed with dst gc, and this warning happens. To fix it, we need to find these xdsts that are still held by others when removing the dev, and free xdst's dev and set it with loopback_dev. But unfortunately after flow_cache for xfrm was deleted, no list tracks them anymore. So we need to save these xdsts somewhere to release the xdst's dev later. To make this easier, this patch is to reuse uncached_list to track xdsts, so that the dev refcnt can be released in the event NETDEV_UNREGISTER process of fib_netdev_notifier. Thanks to Florian, we could move forward this fix quickly. Fixes: 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") Reported-by: Jianlin Shi <jishi@redhat.com> Reported-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-02-14 19:06:02 +08:00
net: dst: Prevent false sharing vs. dst_entry:: __refcnt dst_entry::__refcnt is highly contended in scenarios where many connections happen from and to the same IP. The reference count is an atomic_t, so the reference count operations have to take the cache-line exclusive. Aside of the unavoidable reference count contention there is another significant problem which is caused by that: False sharing. perf top identified two affected read accesses. dst_entry::lwtstate and rtable::rt_genid. dst_entry:__refcnt is located at offset 64 of dst_entry, which puts it into a seperate cacheline vs. the read mostly members located at the beginning of the struct. That prevents false sharing vs. the struct members in the first 64 bytes of the structure, but there is also dst_entry::lwtstate which is located after the reference count and in the same cache line. This member is read after a reference count has been acquired. struct rtable embeds a struct dst_entry at offset 0. struct dst_entry has a size of 112 bytes, which means that the struct members of rtable which follow the dst member share the same cache line as dst_entry::__refcnt. Especially rtable::rt_genid is also read by the contexts which have a reference count acquired already. When dst_entry:__refcnt is incremented or decremented via an atomic operation these read accesses stall. This was found when analysing the memtier benchmark in 1:100 mode, which amplifies the problem extremly. Move the rt[6i]_uncached[_list] members out of struct rtable and struct rt6_info into struct dst_entry to provide padding and move the lwtstate member after that so it ends up in the same cache line. The resulting improvement depends on the micro-architecture and the number of CPUs. It ranges from +20% to +120% with a localhost memtier/memcached benchmark. [ tglx: Rearrange struct ] Signed-off-by: Wangyang Guo <wangyang.guo@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230323102800.042297517@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23 21:55:29 +01:00
net: dst: Prevent false sharing vs. dst_entry:: __refcnt dst_entry::__refcnt is highly contended in scenarios where many connections happen from and to the same IP. The reference count is an atomic_t, so the reference count operations have to take the cache-line exclusive. Aside of the unavoidable reference count contention there is another significant problem which is caused by that: False sharing. perf top identified two affected read accesses. dst_entry::lwtstate and rtable::rt_genid. dst_entry:__refcnt is located at offset 64 of dst_entry, which puts it into a seperate cacheline vs. the read mostly members located at the beginning of the struct. That prevents false sharing vs. the struct members in the first 64 bytes of the structure, but there is also dst_entry::lwtstate which is located after the reference count and in the same cache line. This member is read after a reference count has been acquired. struct rtable embeds a struct dst_entry at offset 0. struct dst_entry has a size of 112 bytes, which means that the struct members of rtable which follow the dst member share the same cache line as dst_entry::__refcnt. Especially rtable::rt_genid is also read by the contexts which have a reference count acquired already. When dst_entry:__refcnt is incremented or decremented via an atomic operation these read accesses stall. This was found when analysing the memtier benchmark in 1:100 mode, which amplifies the problem extremly. Move the rt[6i]_uncached[_list] members out of struct rtable and struct rt6_info into struct dst_entry to provide padding and move the lwtstate member after that so it ends up in the same cache line. The resulting improvement depends on the micro-architecture and the number of CPUs. It ranges from +20% to +120% with a localhost memtier/memcached benchmark. [ tglx: Rearrange struct ] Signed-off-by: Wangyang Guo <wangyang.guo@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230323102800.042297517@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23 21:55:29 +01:00
xfrm: reuse uncached_list to track xdsts In early time, when freeing a xdst, it would be inserted into dst_garbage.list first. Then if it's refcnt was still held somewhere, later it would be put into dst_busy_list in dst_gc_task(). When one dev was being unregistered, the dev of these dsts in dst_busy_list would be set with loopback_dev and put this dev. So that this dev's removal wouldn't get blocked, and avoid the kmsg warning: kernel:unregister_netdevice: waiting for veth0 to become \ free. Usage count = 2 However after Commit 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle"), the xdst will not be freed with dst gc, and this warning happens. To fix it, we need to find these xdsts that are still held by others when removing the dev, and free xdst's dev and set it with loopback_dev. But unfortunately after flow_cache for xfrm was deleted, no list tracks them anymore. So we need to save these xdsts somewhere to release the xdst's dev later. To make this easier, this patch is to reuse uncached_list to track xdsts, so that the dev refcnt can be released in the event NETDEV_UNREGISTER process of fib_netdev_notifier. Thanks to Florian, we could move forward this fix quickly. Fixes: 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") Reported-by: Jianlin Shi <jishi@redhat.com> Reported-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-02-14 19:06:02 +08:00
dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list() syzbot was able to crash the kernel in rt6_uncached_list_flush_dev() in an interesting way [1] Crash happens in list_del_init()/INIT_LIST_HEAD() while writing list->prev, while the prior write on list->next went well. static inline void INIT_LIST_HEAD(struct list_head *list) { WRITE_ONCE(list->next, list); // This went well WRITE_ONCE(list->prev, list); // Crash, @list has been freed. } Issue here is that rt6_uncached_list_del() did not attempt to lock ul->lock, as list_empty(&rt->dst.rt_uncached) returned true because the WRITE_ONCE(list->next, list) happened on the other CPU. We might use list_del_init_careful() and list_empty_careful(), or make sure rt6_uncached_list_del() always grabs the spinlock whenever rt->dst.rt_uncached_list has been set. A similar fix is neeed for IPv4. [1] BUG: KASAN: slab-use-after-free in INIT_LIST_HEAD include/linux/list.h:46 [inline] BUG: KASAN: slab-use-after-free in list_del_init include/linux/list.h:296 [inline] BUG: KASAN: slab-use-after-free in rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline] BUG: KASAN: slab-use-after-free in rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020 Write of size 8 at addr ffff8880294cfa78 by task kworker/u8:14/3450 CPU: 0 UID: 0 PID: 3450 Comm: kworker/u8:14 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Workqueue: netns cleanup_net Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 INIT_LIST_HEAD include/linux/list.h:46 [inline] list_del_init include/linux/list.h:296 [inline] rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline] rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020 addrconf_ifdown+0x143/0x18a0 net/ipv6/addrconf.c:3853 addrconf_notify+0x1bc/0x1050 net/ipv6/addrconf.c:-1 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] netif_close_many+0x29c/0x410 net/core/dev.c:1785 unregister_netdevice_many_notify+0xb50/0x2330 net/core/dev.c:12353 ops_exit_rtnl_list net/core/net_namespace.c:187 [inline] ops_undo_list+0x3dc/0x990 net/core/net_namespace.c:248 cleanup_net+0x4de/0x7b0 net/core/net_namespace.c:696 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> Allocated by task 803: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 unpoison_slab_object mm/kasan/common.c:340 [inline] __kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366 kasan_slab_alloc include/linux/kasan.h:253 [inline] slab_post_alloc_hook mm/slub.c:4953 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x18d/0x6c0 mm/slub.c:5270 dst_alloc+0x105/0x170 net/core/dst.c:89 ip6_dst_alloc net/ipv6/route.c:342 [inline] icmp6_dst_alloc+0x75/0x460 net/ipv6/route.c:3333 mld_sendpack+0x683/0xe60 net/ipv6/mcast.c:1844 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 Freed by task 20: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:253 [inline] __kasan_slab_free+0x5c/0x80 mm/kasan/common.c:285 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:2540 [inline] slab_free mm/slub.c:6670 [inline] kmem_cache_free+0x18f/0x8d0 mm/slub.c:6781 dst_destroy+0x235/0x350 net/core/dst.c:121 rcu_do_batch kernel/rcu/tree.c:2605 [inline] rcu_core kernel/rcu/tree.c:2857 [inline] rcu_cpu_kthread+0xba5/0x1af0 kernel/rcu/tree.c:2945 smpboot_thread_fn+0x542/0xa60 kernel/smpboot.c:160 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 Last potentially related work creation: kasan_save_stack+0x3e/0x60 mm/kasan/common.c:57 kasan_record_aux_stack+0xbd/0xd0 mm/kasan/generic.c:556 __call_rcu_common kernel/rcu/tree.c:3119 [inline] call_rcu+0xee/0x890 kernel/rcu/tree.c:3239 refdst_drop include/net/dst.h:266 [inline] skb_dst_drop include/net/dst.h:278 [inline] skb_release_head_state+0x71/0x360 net/core/skbuff.c:1156 skb_release_all net/core/skbuff.c:1180 [inline] __kfree_skb net/core/skbuff.c:1196 [inline] sk_skb_reason_drop+0xe9/0x170 net/core/skbuff.c:1234 kfree_skb_reason include/linux/skbuff.h:1322 [inline] tcf_kfree_skb_list include/net/sch_generic.h:1127 [inline] __dev_xmit_skb net/core/dev.c:4260 [inline] __dev_queue_xmit+0x26aa/0x3210 net/core/dev.c:4785 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247 NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318 mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 The buggy address belongs to the object at ffff8880294cfa00 which belongs to the cache ip6_dst_cache of size 232 The buggy address is located 120 bytes inside of freed 232-byte region [ffff8880294cfa00, ffff8880294cfae8) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x294cf memcg:ffff88803536b781 flags: 0x80000000000000(node=0|zone=1) page_type: f5(slab) raw: 0080000000000000 ffff88802ff1c8c0 ffffea0000bf2bc0 dead000000000006 raw: 0000000000000000 00000000800c000c 00000000f5000000 ffff88803536b781 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x52820(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP), pid 9, tgid 9 (kworker/0:0), ts 91119585830, free_ts 91088628818 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x234/0x290 mm/page_alloc.c:1857 prep_new_page mm/page_alloc.c:1865 [inline] get_page_from_freelist+0x28c0/0x2960 mm/page_alloc.c:3915 __alloc_frozen_pages_noprof+0x181/0x370 mm/page_alloc.c:5210 alloc_pages_mpol+0xd1/0x380 mm/mempolicy.c:2486 alloc_slab_page mm/slub.c:3075 [inline] allocate_slab+0x86/0x3b0 mm/slub.c:3248 new_slab mm/slub.c:3302 [inline] ___slab_alloc+0xb10/0x13e0 mm/slub.c:4656 __slab_alloc+0xc6/0x1f0 mm/slub.c:4779 __slab_alloc_node mm/slub.c:4855 [inline] slab_alloc_node mm/slub.c:5251 [inline] kmem_cache_alloc_noprof+0x101/0x6c0 mm/slub.c:5270 dst_alloc+0x105/0x170 net/core/dst.c:89 ip6_dst_alloc net/ipv6/route.c:342 [inline] icmp6_dst_alloc+0x75/0x460 net/ipv6/route.c:3333 mld_sendpack+0x683/0xe60 net/ipv6/mcast.c:1844 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 page last free pid 5859 tgid 5859 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1406 [inline] __free_frozen_pages+0xfe1/0x1170 mm/page_alloc.c:2943 discard_slab mm/slub.c:3346 [inline] __put_partials+0x149/0x170 mm/slub.c:3886 __slab_free+0x2af/0x330 mm/slub.c:5952 qlink_free mm/kasan/quarantine.c:163 [inline] qlist_free_all+0x97/0x100 mm/kasan/quarantine.c:179 kasan_quarantine_reduce+0x148/0x160 mm/kasan/quarantine.c:286 __kasan_slab_alloc+0x22/0x80 mm/kasan/common.c:350 kasan_slab_alloc include/linux/kasan.h:253 [inline] slab_post_alloc_hook mm/slub.c:4953 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x18d/0x6c0 mm/slub.c:5270 getname_flags+0xb8/0x540 fs/namei.c:146 getname include/linux/fs.h:2498 [inline] do_sys_openat2+0xbc/0x200 fs/open.c:1426 do_sys_open fs/open.c:1436 [inline] __do_sys_openat fs/open.c:1452 [inline] __se_sys_openat fs/open.c:1447 [inline] __x64_sys_openat+0x138/0x170 fs/open.c:1447 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94 Fixes: 8d0b94afdca8 ("ipv6: Keep track of DST_NOCACHE routes in case of iface down/unregister") Fixes: 78df76a065ae ("ipv4: take rt_uncached_lock only if needed") Reported-by: syzbot+179fc225724092b8b2b2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6964cdf2.050a0220.eaf7.009d.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20260112103825.3810713-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-12 10:38:25 +00:00
dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list() syzbot was able to crash the kernel in rt6_uncached_list_flush_dev() in an interesting way [1] Crash happens in list_del_init()/INIT_LIST_HEAD() while writing list->prev, while the prior write on list->next went well. static inline void INIT_LIST_HEAD(struct list_head *list) { WRITE_ONCE(list->next, list); // This went well WRITE_ONCE(list->prev, list); // Crash, @list has been freed. } Issue here is that rt6_uncached_list_del() did not attempt to lock ul->lock, as list_empty(&rt->dst.rt_uncached) returned true because the WRITE_ONCE(list->next, list) happened on the other CPU. We might use list_del_init_careful() and list_empty_careful(), or make sure rt6_uncached_list_del() always grabs the spinlock whenever rt->dst.rt_uncached_list has been set. A similar fix is neeed for IPv4. [1] BUG: KASAN: slab-use-after-free in INIT_LIST_HEAD include/linux/list.h:46 [inline] BUG: KASAN: slab-use-after-free in list_del_init include/linux/list.h:296 [inline] BUG: KASAN: slab-use-after-free in rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline] BUG: KASAN: slab-use-after-free in rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020 Write of size 8 at addr ffff8880294cfa78 by task kworker/u8:14/3450 CPU: 0 UID: 0 PID: 3450 Comm: kworker/u8:14 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Workqueue: netns cleanup_net Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 INIT_LIST_HEAD include/linux/list.h:46 [inline] list_del_init include/linux/list.h:296 [inline] rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline] rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020 addrconf_ifdown+0x143/0x18a0 net/ipv6/addrconf.c:3853 addrconf_notify+0x1bc/0x1050 net/ipv6/addrconf.c:-1 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] netif_close_many+0x29c/0x410 net/core/dev.c:1785 unregister_netdevice_many_notify+0xb50/0x2330 net/core/dev.c:12353 ops_exit_rtnl_list net/core/net_namespace.c:187 [inline] ops_undo_list+0x3dc/0x990 net/core/net_namespace.c:248 cleanup_net+0x4de/0x7b0 net/core/net_namespace.c:696 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> Allocated by task 803: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 unpoison_slab_object mm/kasan/common.c:340 [inline] __kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366 kasan_slab_alloc include/linux/kasan.h:253 [inline] slab_post_alloc_hook mm/slub.c:4953 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x18d/0x6c0 mm/slub.c:5270 dst_alloc+0x105/0x170 net/core/dst.c:89 ip6_dst_alloc net/ipv6/route.c:342 [inline] icmp6_dst_alloc+0x75/0x460 net/ipv6/route.c:3333 mld_sendpack+0x683/0xe60 net/ipv6/mcast.c:1844 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 Freed by task 20: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:253 [inline] __kasan_slab_free+0x5c/0x80 mm/kasan/common.c:285 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:2540 [inline] slab_free mm/slub.c:6670 [inline] kmem_cache_free+0x18f/0x8d0 mm/slub.c:6781 dst_destroy+0x235/0x350 net/core/dst.c:121 rcu_do_batch kernel/rcu/tree.c:2605 [inline] rcu_core kernel/rcu/tree.c:2857 [inline] rcu_cpu_kthread+0xba5/0x1af0 kernel/rcu/tree.c:2945 smpboot_thread_fn+0x542/0xa60 kernel/smpboot.c:160 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 Last potentially related work creation: kasan_save_stack+0x3e/0x60 mm/kasan/common.c:57 kasan_record_aux_stack+0xbd/0xd0 mm/kasan/generic.c:556 __call_rcu_common kernel/rcu/tree.c:3119 [inline] call_rcu+0xee/0x890 kernel/rcu/tree.c:3239 refdst_drop include/net/dst.h:266 [inline] skb_dst_drop include/net/dst.h:278 [inline] skb_release_head_state+0x71/0x360 net/core/skbuff.c:1156 skb_release_all net/core/skbuff.c:1180 [inline] __kfree_skb net/core/skbuff.c:1196 [inline] sk_skb_reason_drop+0xe9/0x170 net/core/skbuff.c:1234 kfree_skb_reason include/linux/skbuff.h:1322 [inline] tcf_kfree_skb_list include/net/sch_generic.h:1127 [inline] __dev_xmit_skb net/core/dev.c:4260 [inline] __dev_queue_xmit+0x26aa/0x3210 net/core/dev.c:4785 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247 NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318 mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 The buggy address belongs to the object at ffff8880294cfa00 which belongs to the cache ip6_dst_cache of size 232 The buggy address is located 120 bytes inside of freed 232-byte region [ffff8880294cfa00, ffff8880294cfae8) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x294cf memcg:ffff88803536b781 flags: 0x80000000000000(node=0|zone=1) page_type: f5(slab) raw: 0080000000000000 ffff88802ff1c8c0 ffffea0000bf2bc0 dead000000000006 raw: 0000000000000000 00000000800c000c 00000000f5000000 ffff88803536b781 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x52820(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP), pid 9, tgid 9 (kworker/0:0), ts 91119585830, free_ts 91088628818 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x234/0x290 mm/page_alloc.c:1857 prep_new_page mm/page_alloc.c:1865 [inline] get_page_from_freelist+0x28c0/0x2960 mm/page_alloc.c:3915 __alloc_frozen_pages_noprof+0x181/0x370 mm/page_alloc.c:5210 alloc_pages_mpol+0xd1/0x380 mm/mempolicy.c:2486 alloc_slab_page mm/slub.c:3075 [inline] allocate_slab+0x86/0x3b0 mm/slub.c:3248 new_slab mm/slub.c:3302 [inline] ___slab_alloc+0xb10/0x13e0 mm/slub.c:4656 __slab_alloc+0xc6/0x1f0 mm/slub.c:4779 __slab_alloc_node mm/slub.c:4855 [inline] slab_alloc_node mm/slub.c:5251 [inline] kmem_cache_alloc_noprof+0x101/0x6c0 mm/slub.c:5270 dst_alloc+0x105/0x170 net/core/dst.c:89 ip6_dst_alloc net/ipv6/route.c:342 [inline] icmp6_dst_alloc+0x75/0x460 net/ipv6/route.c:3333 mld_sendpack+0x683/0xe60 net/ipv6/mcast.c:1844 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 page last free pid 5859 tgid 5859 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1406 [inline] __free_frozen_pages+0xfe1/0x1170 mm/page_alloc.c:2943 discard_slab mm/slub.c:3346 [inline] __put_partials+0x149/0x170 mm/slub.c:3886 __slab_free+0x2af/0x330 mm/slub.c:5952 qlink_free mm/kasan/quarantine.c:163 [inline] qlist_free_all+0x97/0x100 mm/kasan/quarantine.c:179 kasan_quarantine_reduce+0x148/0x160 mm/kasan/quarantine.c:286 __kasan_slab_alloc+0x22/0x80 mm/kasan/common.c:350 kasan_slab_alloc include/linux/kasan.h:253 [inline] slab_post_alloc_hook mm/slub.c:4953 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x18d/0x6c0 mm/slub.c:5270 getname_flags+0xb8/0x540 fs/namei.c:146 getname include/linux/fs.h:2498 [inline] do_sys_openat2+0xbc/0x200 fs/open.c:1426 do_sys_open fs/open.c:1436 [inline] __do_sys_openat fs/open.c:1452 [inline] __se_sys_openat fs/open.c:1447 [inline] __x64_sys_openat+0x138/0x170 fs/open.c:1447 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94 Fixes: 8d0b94afdca8 ("ipv6: Keep track of DST_NOCACHE routes in case of iface down/unregister") Fixes: 78df76a065ae ("ipv4: take rt_uncached_lock only if needed") Reported-by: syzbot+179fc225724092b8b2b2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6964cdf2.050a0220.eaf7.009d.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20260112103825.3810713-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-12 10:38:25 +00:00
net: dst: Prevent false sharing vs. dst_entry:: __refcnt dst_entry::__refcnt is highly contended in scenarios where many connections happen from and to the same IP. The reference count is an atomic_t, so the reference count operations have to take the cache-line exclusive. Aside of the unavoidable reference count contention there is another significant problem which is caused by that: False sharing. perf top identified two affected read accesses. dst_entry::lwtstate and rtable::rt_genid. dst_entry:__refcnt is located at offset 64 of dst_entry, which puts it into a seperate cacheline vs. the read mostly members located at the beginning of the struct. That prevents false sharing vs. the struct members in the first 64 bytes of the structure, but there is also dst_entry::lwtstate which is located after the reference count and in the same cache line. This member is read after a reference count has been acquired. struct rtable embeds a struct dst_entry at offset 0. struct dst_entry has a size of 112 bytes, which means that the struct members of rtable which follow the dst member share the same cache line as dst_entry::__refcnt. Especially rtable::rt_genid is also read by the contexts which have a reference count acquired already. When dst_entry:__refcnt is incremented or decremented via an atomic operation these read accesses stall. This was found when analysing the memtier benchmark in 1:100 mode, which amplifies the problem extremly. Move the rt[6i]_uncached[_list] members out of struct rtable and struct rt6_info into struct dst_entry to provide padding and move the lwtstate member after that so it ends up in the same cache line. The resulting improvement depends on the micro-architecture and the number of CPUs. It ranges from +20% to +120% with a localhost memtier/memcached benchmark. [ tglx: Rearrange struct ] Signed-off-by: Wangyang Guo <wangyang.guo@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230323102800.042297517@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23 21:55:29 +01:00
xfrm: reuse uncached_list to track xdsts In early time, when freeing a xdst, it would be inserted into dst_garbage.list first. Then if it's refcnt was still held somewhere, later it would be put into dst_busy_list in dst_gc_task(). When one dev was being unregistered, the dev of these dsts in dst_busy_list would be set with loopback_dev and put this dev. So that this dev's removal wouldn't get blocked, and avoid the kmsg warning: kernel:unregister_netdevice: waiting for veth0 to become \ free. Usage count = 2 However after Commit 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle"), the xdst will not be freed with dst gc, and this warning happens. To fix it, we need to find these xdsts that are still held by others when removing the dev, and free xdst's dev and set it with loopback_dev. But unfortunately after flow_cache for xfrm was deleted, no list tracks them anymore. So we need to save these xdsts somewhere to release the xdst's dev later. To make this easier, this patch is to reuse uncached_list to track xdsts, so that the dev refcnt can be released in the event NETDEV_UNREGISTER process of fib_netdev_notifier. Thanks to Florian, we could move forward this fix quickly. Fixes: 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") Reported-by: Jianlin Shi <jishi@redhat.com> Reported-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-02-14 19:06:02 +08:00
xfrm: reuse uncached_list to track xdsts In early time, when freeing a xdst, it would be inserted into dst_garbage.list first. Then if it's refcnt was still held somewhere, later it would be put into dst_busy_list in dst_gc_task(). When one dev was being unregistered, the dev of these dsts in dst_busy_list would be set with loopback_dev and put this dev. So that this dev's removal wouldn't get blocked, and avoid the kmsg warning: kernel:unregister_netdevice: waiting for veth0 to become \ free. Usage count = 2 However after Commit 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle"), the xdst will not be freed with dst gc, and this warning happens. To fix it, we need to find these xdsts that are still held by others when removing the dev, and free xdst's dev and set it with loopback_dev. But unfortunately after flow_cache for xfrm was deleted, no list tracks them anymore. So we need to save these xdsts somewhere to release the xdst's dev later. To make this easier, this patch is to reuse uncached_list to track xdsts, so that the dev refcnt can be released in the event NETDEV_UNREGISTER process of fib_netdev_notifier. Thanks to Florian, we could move forward this fix quickly. Fixes: 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") Reported-by: Jianlin Shi <jishi@redhat.com> Reported-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-02-14 19:06:02 +08:00
net: dst: Prevent false sharing vs. dst_entry:: __refcnt dst_entry::__refcnt is highly contended in scenarios where many connections happen from and to the same IP. The reference count is an atomic_t, so the reference count operations have to take the cache-line exclusive. Aside of the unavoidable reference count contention there is another significant problem which is caused by that: False sharing. perf top identified two affected read accesses. dst_entry::lwtstate and rtable::rt_genid. dst_entry:__refcnt is located at offset 64 of dst_entry, which puts it into a seperate cacheline vs. the read mostly members located at the beginning of the struct. That prevents false sharing vs. the struct members in the first 64 bytes of the structure, but there is also dst_entry::lwtstate which is located after the reference count and in the same cache line. This member is read after a reference count has been acquired. struct rtable embeds a struct dst_entry at offset 0. struct dst_entry has a size of 112 bytes, which means that the struct members of rtable which follow the dst member share the same cache line as dst_entry::__refcnt. Especially rtable::rt_genid is also read by the contexts which have a reference count acquired already. When dst_entry:__refcnt is incremented or decremented via an atomic operation these read accesses stall. This was found when analysing the memtier benchmark in 1:100 mode, which amplifies the problem extremly. Move the rt[6i]_uncached[_list] members out of struct rtable and struct rt6_info into struct dst_entry to provide padding and move the lwtstate member after that so it ends up in the same cache line. The resulting improvement depends on the micro-architecture and the number of CPUs. It ranges from +20% to +120% with a localhost memtier/memcached benchmark. [ tglx: Rearrange struct ] Signed-off-by: Wangyang Guo <wangyang.guo@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230323102800.042297517@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23 21:55:29 +01:00
ipv4: drop dst in multicast routing path kmemleak reports the following when routing multicast traffic over an ipsec tunnel. Kmemleak output: unreferenced object 0x8000000044bebb00 (size 256): comm "softirq", pid 0, jiffies 4294985356 (age 126.810s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 80 00 00 00 05 13 74 80 ..............t. 80 00 00 00 04 9b bf f9 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f83947e0>] __kmalloc+0x1e8/0x300 [<00000000b7ed8dca>] metadata_dst_alloc+0x24/0x58 [<0000000081d32c20>] __ipgre_rcv+0x100/0x2b8 [<00000000824f6cf1>] gre_rcv+0x178/0x540 [<00000000ccd4e162>] gre_rcv+0x7c/0xd8 [<00000000c024b148>] ip_protocol_deliver_rcu+0x124/0x350 [<000000006a483377>] ip_local_deliver_finish+0x54/0x68 [<00000000d9271b3a>] ip_local_deliver+0x128/0x168 [<00000000bd4968ae>] xfrm_trans_reinject+0xb8/0xf8 [<0000000071672a19>] tasklet_action_common.isra.16+0xc4/0x1b0 [<0000000062e9c336>] __do_softirq+0x1fc/0x3e0 [<00000000013d7914>] irq_exit+0xc4/0xe0 [<00000000a4d73e90>] plat_irq_dispatch+0x7c/0x108 [<000000000751eb8e>] handle_int+0x16c/0x178 [<000000001668023b>] _raw_spin_unlock_irqrestore+0x1c/0x28 The metadata dst is leaked when ip_route_input_mc() updates the dst for the skb. Commit f38a9eb1f77b ("dst: Metadata destinations") correctly handled dropping the dst in ip_route_input_slow() but missed the multicast case which is handled by ip_route_input_mc(). Drop the dst in ip_route_input_mc() avoiding the leak. Fixes: f38a9eb1f77b ("dst: Metadata destinations") Signed-off-by: Lokesh Dhoundiyal <lokesh.dhoundiyal@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220505020017.3111846-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 14:00:17 +12:00
ipv4: Improve martian logs At the current moment, the logs for martian packets are as follows: ``` martian source {DST} from {SRC}, on dev {DEV} martian destination {DST} from {SRC}, dev {DEV} ``` These messages feel rather hard to understand in production, especially the "martian source" one, mostly because it is grammatically ambitious to parse which part is now the source address and which part is the destination address. For example, "{DST}" may there be interpreted as the actual source address due to following the word "source", thereby implying the actual source address to be the destination one. Personally, I discovered this bug while toying around with TUN interfaces and using them as a tunnel (receiving packets via a TUN interface and sending them over a TCP stream; receiving packets from a TCP stream and writing them to a TUN).[^1] When these IP addresses contained local IPs (i.e. 10.0.0.0/8 in source and destination), everything worked fine. However, sending them to a real routable IP address on the internet led to them being treated as a martian packet, obviously. Using a few sysctl(8) and iptables(8) settings[^2] fixed it, but while debugging I found the log message starting with "martian source" rather confusing, as I was unsure on whether the packet that gets dropped was the packet originating from me or the response from the endpoint, as "martian source <ROUTABLE IP>" could also be falsely interpreted as the response packet being martian, due to the word "source" followed by the routable IP address, implying the source address of that packet is set to this IP, as explained above. In the end, I had to look into the source code of the kernel on where this error message gets generated, which is usually an indicator of there being room for improvement with regard to this error message. In terms of improvement, this commit changes the error messages for martian source and martian destination packets as follows: ``` martian source (src={SRC}, dst={DST}, dev={DEV}) martian destination (src={SRC}, dst={DST}, dev={DEV}) ``` These new wordings leave pretty much no room for ambiguity as all parameters are prefixed with a respective key explaining their semantic meaning. See also the following thread on LKML.[^3] [^1]: <https://backreference.org/2010/03/26/tuntap-interface-tutorial> [^2]: sysctl net.ipv4.ip_forward=1 && \ iptables -A INPUT -i tun0 -j ACCEPT && \ iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE [^3]: <https://lore.kernel.org/all/aSd4Xj8rHrh-krjy@4944566b5c925f79/> Signed-off-by: Clara Engler <cve@cve.cx> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20260101125114.2608-1-cve@cve.cx Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-01 13:51:14 +01:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
ip: load balance tcp connections to single dst addr and port Load balance new TCP connections across nexthops also when they connect to the same service at a single remote address and port. This affects only port-based multipath hashing: fib_multipath_hash_policy 1 or 3. Local connections must choose both a source address and port when connecting to a remote service, in ip_route_connect. This "chicken-and-egg problem" (commit 2d7192d6cbab ("ipv4: Sanitize and simplify ip_route_{connect,newports}()")) is resolved by first selecting a source address, by looking up a route using the zero wildcard source port and address. As a result multiple connections to the same destination address and port have no entropy in fib_multipath_hash. This is not a problem when forwarding, as skb-based hashing has a 4-tuple. Nor when establishing UDP connections, as autobind there selects a port before reaching ip_route_connect. Load balance also TCP, by using a random port in fib_multipath_hash. Port assignment in inet_hash_connect is not atomic with ip_route_connect. Thus ports are unpredictable, effectively random. Implementation details: Do not actually pass a random fl4_sport, as that affects not only hashing, but routing more broadly, and can match a source port based policy route, which existing wildcard port 0 will not. Instead, define a new wildcard flowi flag that is used only for hashing. Selecting a random source is equivalent to just selecting a random hash entirely. But for code clarity, follow the normal 4-tuple hash process and only update this field. fib_multipath_hash can be reached with zero sport from other code paths, so explicitly pass this flowi flag, rather than trying to infer this case in the function itself. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250424143549.669426-3-willemdebruijn.kernel@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-24 10:35:19 -04:00
ip: load balance tcp connections to single dst addr and port Load balance new TCP connections across nexthops also when they connect to the same service at a single remote address and port. This affects only port-based multipath hashing: fib_multipath_hash_policy 1 or 3. Local connections must choose both a source address and port when connecting to a remote service, in ip_route_connect. This "chicken-and-egg problem" (commit 2d7192d6cbab ("ipv4: Sanitize and simplify ip_route_{connect,newports}()")) is resolved by first selecting a source address, by looking up a route using the zero wildcard source port and address. As a result multiple connections to the same destination address and port have no entropy in fib_multipath_hash. This is not a problem when forwarding, as skb-based hashing has a 4-tuple. Nor when establishing UDP connections, as autobind there selects a port before reaching ip_route_connect. Load balance also TCP, by using a random port in fib_multipath_hash. Port assignment in inet_hash_connect is not atomic with ip_route_connect. Thus ports are unpredictable, effectively random. Implementation details: Do not actually pass a random fl4_sport, as that affects not only hashing, but routing more broadly, and can match a source port based policy route, which existing wildcard port 0 will not. Instead, define a new wildcard flowi flag that is used only for hashing. Selecting a random source is equivalent to just selecting a random hash entirely. But for code clarity, follow the normal 4-tuple hash process and only update this field. fib_multipath_hash can be reached with zero sport from other code paths, so explicitly pass this flowi flag, rather than trying to infer this case in the function itself. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250424143549.669426-3-willemdebruijn.kernel@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-24 10:35:19 -04:00
ipv4: prefer multipath nexthop that matches source address With multipath routes, try to ensure that packets leave on the device that is associated with the source address. Avoid the following tcpdump example: veth0 Out IP 10.1.0.2.38640 > 10.2.0.3.8000: Flags [S] veth1 Out IP 10.1.0.2.38648 > 10.2.0.3.8000: Flags [S] Which can happen easily with the most straightforward setup: ip addr add 10.0.0.1/24 dev veth0 ip addr add 10.1.0.1/24 dev veth1 ip route add 10.2.0.3 nexthop via 10.0.0.2 dev veth0 \ nexthop via 10.1.0.2 dev veth1 This is apparently considered WAI, based on the comment in ip_route_output_key_hash_rcu: * 2. Moreover, we are allowed to send packets with saddr * of another iface. --ANK It may be ok for some uses of multipath, but not all. For instance, when using two ISPs, a router may drop packets with unknown source. The behavior occurs because tcp_v4_connect makes three route lookups when establishing a connection: 1. ip_route_connect calls to select a source address, with saddr zero. 2. ip_route_connect calls again now that saddr and daddr are known. 3. ip_route_newports calls again after a source port is also chosen. With a route with multiple nexthops, each lookup may make a different choice depending on available entropy to fib_select_multipath. So it is possible for 1 to select the saddr from the first entry, but 3 to select the second entry. Leading to the above situation. Address this by preferring a match that matches the flowi4 saddr. This will make 2 and 3 make the same choice as 1. Continue to update the backup choice until a choice that matches saddr is found. Do this in fib_select_multipath itself, rather than passing an fl4_oif constraint, to avoid changing non-multipath route selection. Commit e6b45241c57a ("ipv4: reset flowi parameters on route connect") shows how that may cause regressions. Also read ipv4.sysctl_fib_multipath_use_neigh only once. No need to refresh in the loop. This does not happen in IPv6, which performs only one lookup. Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250424143549.669426-2-willemdebruijn.kernel@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-24 10:35:18 -04:00
ipv4: check for NULL idev in ip_route_use_hint() syzbot was able to trigger a NULL deref in fib_validate_source() in an old tree [1]. It appears the bug exists in latest trees. All calls to __in_dev_get_rcu() must be checked for a NULL result. [1] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 3257 Comm: syz-executor.3 Not tainted 5.10.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:fib_validate_source+0xbf/0x15a0 net/ipv4/fib_frontend.c:425 Code: 18 f2 f2 f2 f2 42 c7 44 20 23 f3 f3 f3 f3 48 89 44 24 78 42 c6 44 20 27 f3 e8 5d 88 48 fc 4c 89 e8 48 c1 e8 03 48 89 44 24 18 <42> 80 3c 20 00 74 08 4c 89 ef e8 d2 15 98 fc 48 89 5c 24 10 41 bf RSP: 0018:ffffc900015fee40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88800f7a4000 RCX: ffff88800f4f90c0 RDX: 0000000000000000 RSI: 0000000004001eac RDI: ffff8880160c64c0 RBP: ffffc900015ff060 R08: 0000000000000000 R09: ffff88800f7a4000 R10: 0000000000000002 R11: ffff88800f4f90c0 R12: dffffc0000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88800f7a4000 FS: 00007f938acfe6c0(0000) GS:ffff888058c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f938acddd58 CR3: 000000001248e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip_route_use_hint+0x410/0x9b0 net/ipv4/route.c:2231 ip_rcv_finish_core+0x2c4/0x1a30 net/ipv4/ip_input.c:327 ip_list_rcv_finish net/ipv4/ip_input.c:612 [inline] ip_sublist_rcv+0x3ed/0xe50 net/ipv4/ip_input.c:638 ip_list_rcv+0x422/0x470 net/ipv4/ip_input.c:673 __netif_receive_skb_list_ptype net/core/dev.c:5572 [inline] __netif_receive_skb_list_core+0x6b1/0x890 net/core/dev.c:5620 __netif_receive_skb_list net/core/dev.c:5672 [inline] netif_receive_skb_list_internal+0x9f9/0xdc0 net/core/dev.c:5764 netif_receive_skb_list+0x55/0x3e0 net/core/dev.c:5816 xdp_recv_frames net/bpf/test_run.c:257 [inline] xdp_test_run_batch net/bpf/test_run.c:335 [inline] bpf_test_run_xdp_live+0x1818/0x1d00 net/bpf/test_run.c:363 bpf_prog_test_run_xdp+0x81f/0x1170 net/bpf/test_run.c:1376 bpf_prog_test_run+0x349/0x3c0 kernel/bpf/syscall.c:3736 __sys_bpf+0x45c/0x710 kernel/bpf/syscall.c:5115 __do_sys_bpf kernel/bpf/syscall.c:5201 [inline] __se_sys_bpf kernel/bpf/syscall.c:5199 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5199 Fixes: 02b24941619f ("ipv4: use dst hint for ipv4 list receive") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240421184326.1704930-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-21 18:43:26 +00:00
ipv4: check for NULL idev in ip_route_use_hint() syzbot was able to trigger a NULL deref in fib_validate_source() in an old tree [1]. It appears the bug exists in latest trees. All calls to __in_dev_get_rcu() must be checked for a NULL result. [1] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 3257 Comm: syz-executor.3 Not tainted 5.10.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:fib_validate_source+0xbf/0x15a0 net/ipv4/fib_frontend.c:425 Code: 18 f2 f2 f2 f2 42 c7 44 20 23 f3 f3 f3 f3 48 89 44 24 78 42 c6 44 20 27 f3 e8 5d 88 48 fc 4c 89 e8 48 c1 e8 03 48 89 44 24 18 <42> 80 3c 20 00 74 08 4c 89 ef e8 d2 15 98 fc 48 89 5c 24 10 41 bf RSP: 0018:ffffc900015fee40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88800f7a4000 RCX: ffff88800f4f90c0 RDX: 0000000000000000 RSI: 0000000004001eac RDI: ffff8880160c64c0 RBP: ffffc900015ff060 R08: 0000000000000000 R09: ffff88800f7a4000 R10: 0000000000000002 R11: ffff88800f4f90c0 R12: dffffc0000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88800f7a4000 FS: 00007f938acfe6c0(0000) GS:ffff888058c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f938acddd58 CR3: 000000001248e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip_route_use_hint+0x410/0x9b0 net/ipv4/route.c:2231 ip_rcv_finish_core+0x2c4/0x1a30 net/ipv4/ip_input.c:327 ip_list_rcv_finish net/ipv4/ip_input.c:612 [inline] ip_sublist_rcv+0x3ed/0xe50 net/ipv4/ip_input.c:638 ip_list_rcv+0x422/0x470 net/ipv4/ip_input.c:673 __netif_receive_skb_list_ptype net/core/dev.c:5572 [inline] __netif_receive_skb_list_core+0x6b1/0x890 net/core/dev.c:5620 __netif_receive_skb_list net/core/dev.c:5672 [inline] netif_receive_skb_list_internal+0x9f9/0xdc0 net/core/dev.c:5764 netif_receive_skb_list+0x55/0x3e0 net/core/dev.c:5816 xdp_recv_frames net/bpf/test_run.c:257 [inline] xdp_test_run_batch net/bpf/test_run.c:335 [inline] bpf_test_run_xdp_live+0x1818/0x1d00 net/bpf/test_run.c:363 bpf_prog_test_run_xdp+0x81f/0x1170 net/bpf/test_run.c:1376 bpf_prog_test_run+0x349/0x3c0 kernel/bpf/syscall.c:3736 __sys_bpf+0x45c/0x710 kernel/bpf/syscall.c:5115 __do_sys_bpf kernel/bpf/syscall.c:5201 [inline] __se_sys_bpf kernel/bpf/syscall.c:5199 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5199 Fixes: 02b24941619f ("ipv4: use dst hint for ipv4 list receive") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240421184326.1704930-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-21 18:43:26 +00:00
fib: RCU conversion of fib_lookup() fib_lookup() converted to be called in RCU protected context, no reference taken and released on a contended cache line (fib_clntref) fib_table_lookup() and fib_semantic_match() get an additional parameter. struct fib_info gets an rcu_head field, and is freed after an rcu grace period. Stress test : (Sending 160.000.000 UDP frames on same neighbour, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_HASH) (about same results for FIB_TRIE) Before patch : real 1m31.199s user 0m13.761s sys 23m24.780s After patch: real 1m5.375s user 0m14.997s sys 15m50.115s Before patch Profile : 13044.00 15.4% __ip_route_output_key vmlinux 8438.00 10.0% dst_destroy vmlinux 5983.00 7.1% fib_semantic_match vmlinux 5410.00 6.4% fib_rules_lookup vmlinux 4803.00 5.7% neigh_lookup vmlinux 4420.00 5.2% _raw_spin_lock vmlinux 3883.00 4.6% rt_set_nexthop vmlinux 3261.00 3.9% _raw_read_lock vmlinux 2794.00 3.3% fib_table_lookup vmlinux 2374.00 2.8% neigh_resolve_output vmlinux 2153.00 2.5% dst_alloc vmlinux 1502.00 1.8% _raw_read_lock_bh vmlinux 1484.00 1.8% kmem_cache_alloc vmlinux 1407.00 1.7% eth_header vmlinux 1406.00 1.7% ipv4_dst_destroy vmlinux 1298.00 1.5% __copy_from_user_ll vmlinux 1174.00 1.4% dev_queue_xmit vmlinux 1000.00 1.2% ip_output vmlinux After patch Profile : 13712.00 15.8% dst_destroy vmlinux 8548.00 9.9% __ip_route_output_key vmlinux 7017.00 8.1% neigh_lookup vmlinux 4554.00 5.3% fib_semantic_match vmlinux 4067.00 4.7% _raw_read_lock vmlinux 3491.00 4.0% dst_alloc vmlinux 3186.00 3.7% neigh_resolve_output vmlinux 3103.00 3.6% fib_table_lookup vmlinux 2098.00 2.4% _raw_read_lock_bh vmlinux 2081.00 2.4% kmem_cache_alloc vmlinux 2013.00 2.3% _raw_spin_lock vmlinux 1763.00 2.0% __copy_from_user_ll vmlinux 1763.00 2.0% ip_output vmlinux 1761.00 2.0% ipv4_dst_destroy vmlinux 1631.00 1.9% eth_header vmlinux 1440.00 1.7% _raw_read_unlock_bh vmlinux Reference results, if IP route cache is enabled : real 0m29.718s user 0m10.845s sys 7m37.341s 25213.00 29.5% __ip_route_output_key vmlinux 9011.00 10.5% dst_release vmlinux 4817.00 5.6% ip_push_pending_frames vmlinux 4232.00 5.0% ip_finish_output vmlinux 3940.00 4.6% udp_sendmsg vmlinux 3730.00 4.4% __copy_from_user_ll vmlinux 3716.00 4.4% ip_route_output_flow vmlinux 2451.00 2.9% __xfrm_lookup vmlinux 2221.00 2.6% ip_append_data vmlinux 1718.00 2.0% _raw_spin_lock_bh vmlinux 1655.00 1.9% __alloc_skb vmlinux 1572.00 1.8% sock_wfree vmlinux 1345.00 1.6% kfree vmlinux Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 10:41:36 +00:00
net: Add l3mdev index to flow struct and avoid oif reset for port devices The fundamental premise of VRF and l3mdev core code is binding a socket to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope. Legacy code resets flowi_oif to the l3mdev losing any original port device binding. Ben (among others) has demonstrated use cases where the original port device binding is important and needs to be retained. This patch handles that by adding a new entry to the common flow struct that can indicate the l3mdev index for later rule and table matching avoiding the need to reset flowi_oif. In addition to allowing more use cases that require port device binds, this patch brings a few datapath simplications: 1. l3mdev_fib_rule_match is only called when walking fib rules and always after l3mdev_update_flow. That allows an optimization to bail early for non-VRF type uses cases when flowi_l3mdev is not set. Also, only that index needs to be checked for the FIB table id. 2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev (e.g., VRF) device. By resetting flowi_oif only for this case the FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed, removing several checks in the datapath. The flowi_iif path can be simplified to only be called if the it is not loopback (loopback can not be assigned to an L3 domain) and the l3mdev index is not already set. 3. Avoid another device lookup in the output path when the fib lookup returns a reject failure. Note: 2 functional tests for local traffic with reject fib rules are updated to reflect the new direct failure at FIB lookup time for ping rather than the failure on packet path. The current code fails like this: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: Warning: source address might be selected on device other than: eth1 PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data. --- 172.16.3.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms where the test now directly fails: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: connect: No route to host Signed-off-by: David Ahern <dsahern@kernel.org> Tested-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-14 14:45:51 -06:00
ipv4: Convert ->flowi4_tos to dscp_t. Convert the ->flowic_tos field of struct flowi_common from __u8 to dscp_t, rename it ->flowic_dscp and propagate these changes to struct flowi and struct flowi4. We've had several bugs in the past where ECN bits could interfere with IPv4 routing, because these bits were not properly cleared when setting ->flowi4_tos. These bugs should be fixed now and the dscp_t type has been introduced to ensure that variables carrying DSCP values don't accidentally have any ECN bits set. Several variables and structure fields have been converted to dscp_t already, but the main IPv4 routing structure, struct flowi4, is still using a __u8. To avoid any future regression, this patch converts it to dscp_t. There are many users to convert at once. Fortunately, around half of ->flowi4_tos users already have a dscp_t value at hand, which they currently convert to __u8 using inet_dscp_to_dsfield(). For all of these users, we just need to drop that conversion. But, although we try to do the __u8 <-> dscp_t conversions at the boundaries of the network or of user space, some places still store TOS/DSCP variables as __u8 in core networking code. Those can hardly be converted either because the data structure is part of UAPI or because the same variable or field is also used for handling ECN in other parts of the code. In all of these cases where we don't have a dscp_t variable at hand, we need to use inet_dsfield_to_dscp() when interacting with ->flowi4_dscp. Changes since v1: * Fix space alignment in __bpf_redirect_neigh_v4() (Ido). Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/29acecb45e911d17446b9a3dbdb1ab7b821ea371.1756128932.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-25 15:37:43 +02:00
fib: RCU conversion of fib_lookup() fib_lookup() converted to be called in RCU protected context, no reference taken and released on a contended cache line (fib_clntref) fib_table_lookup() and fib_semantic_match() get an additional parameter. struct fib_info gets an rcu_head field, and is freed after an rcu grace period. Stress test : (Sending 160.000.000 UDP frames on same neighbour, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_HASH) (about same results for FIB_TRIE) Before patch : real 1m31.199s user 0m13.761s sys 23m24.780s After patch: real 1m5.375s user 0m14.997s sys 15m50.115s Before patch Profile : 13044.00 15.4% __ip_route_output_key vmlinux 8438.00 10.0% dst_destroy vmlinux 5983.00 7.1% fib_semantic_match vmlinux 5410.00 6.4% fib_rules_lookup vmlinux 4803.00 5.7% neigh_lookup vmlinux 4420.00 5.2% _raw_spin_lock vmlinux 3883.00 4.6% rt_set_nexthop vmlinux 3261.00 3.9% _raw_read_lock vmlinux 2794.00 3.3% fib_table_lookup vmlinux 2374.00 2.8% neigh_resolve_output vmlinux 2153.00 2.5% dst_alloc vmlinux 1502.00 1.8% _raw_read_lock_bh vmlinux 1484.00 1.8% kmem_cache_alloc vmlinux 1407.00 1.7% eth_header vmlinux 1406.00 1.7% ipv4_dst_destroy vmlinux 1298.00 1.5% __copy_from_user_ll vmlinux 1174.00 1.4% dev_queue_xmit vmlinux 1000.00 1.2% ip_output vmlinux After patch Profile : 13712.00 15.8% dst_destroy vmlinux 8548.00 9.9% __ip_route_output_key vmlinux 7017.00 8.1% neigh_lookup vmlinux 4554.00 5.3% fib_semantic_match vmlinux 4067.00 4.7% _raw_read_lock vmlinux 3491.00 4.0% dst_alloc vmlinux 3186.00 3.7% neigh_resolve_output vmlinux 3103.00 3.6% fib_table_lookup vmlinux 2098.00 2.4% _raw_read_lock_bh vmlinux 2081.00 2.4% kmem_cache_alloc vmlinux 2013.00 2.3% _raw_spin_lock vmlinux 1763.00 2.0% __copy_from_user_ll vmlinux 1763.00 2.0% ip_output vmlinux 1761.00 2.0% ipv4_dst_destroy vmlinux 1631.00 1.9% eth_header vmlinux 1440.00 1.7% _raw_read_unlock_bh vmlinux Reference results, if IP route cache is enabled : real 0m29.718s user 0m10.845s sys 7m37.341s 25213.00 29.5% __ip_route_output_key vmlinux 9011.00 10.5% dst_release vmlinux 4817.00 5.6% ip_push_pending_frames vmlinux 4232.00 5.0% ip_finish_output vmlinux 3940.00 4.6% udp_sendmsg vmlinux 3730.00 4.4% __copy_from_user_ll vmlinux 3716.00 4.4% ip_route_output_flow vmlinux 2451.00 2.9% __xfrm_lookup vmlinux 2221.00 2.6% ip_append_data vmlinux 1718.00 2.0% _raw_spin_lock_bh vmlinux 1655.00 1.9% __alloc_skb vmlinux 1572.00 1.8% sock_wfree vmlinux 1345.00 1.6% kfree vmlinux Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 10:41:36 +00:00
ipv4: Improve martian logs At the current moment, the logs for martian packets are as follows: ``` martian source {DST} from {SRC}, on dev {DEV} martian destination {DST} from {SRC}, dev {DEV} ``` These messages feel rather hard to understand in production, especially the "martian source" one, mostly because it is grammatically ambitious to parse which part is now the source address and which part is the destination address. For example, "{DST}" may there be interpreted as the actual source address due to following the word "source", thereby implying the actual source address to be the destination one. Personally, I discovered this bug while toying around with TUN interfaces and using them as a tunnel (receiving packets via a TUN interface and sending them over a TCP stream; receiving packets from a TCP stream and writing them to a TUN).[^1] When these IP addresses contained local IPs (i.e. 10.0.0.0/8 in source and destination), everything worked fine. However, sending them to a real routable IP address on the internet led to them being treated as a martian packet, obviously. Using a few sysctl(8) and iptables(8) settings[^2] fixed it, but while debugging I found the log message starting with "martian source" rather confusing, as I was unsure on whether the packet that gets dropped was the packet originating from me or the response from the endpoint, as "martian source <ROUTABLE IP>" could also be falsely interpreted as the response packet being martian, due to the word "source" followed by the routable IP address, implying the source address of that packet is set to this IP, as explained above. In the end, I had to look into the source code of the kernel on where this error message gets generated, which is usually an indicator of there being room for improvement with regard to this error message. In terms of improvement, this commit changes the error messages for martian source and martian destination packets as follows: ``` martian source (src={SRC}, dst={DST}, dev={DEV}) martian destination (src={SRC}, dst={DST}, dev={DEV}) ``` These new wordings leave pretty much no room for ambiguity as all parameters are prefixed with a respective key explaining their semantic meaning. See also the following thread on LKML.[^3] [^1]: <https://backreference.org/2010/03/26/tuntap-interface-tutorial> [^2]: sysctl net.ipv4.ip_forward=1 && \ iptables -A INPUT -i tun0 -j ACCEPT && \ iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE [^3]: <https://lore.kernel.org/all/aSd4Xj8rHrh-krjy@4944566b5c925f79/> Signed-off-by: Clara Engler <cve@cve.cx> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20260101125114.2608-1-cve@cve.cx Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-01 13:51:14 +01:00
fib: RCU conversion of fib_lookup() fib_lookup() converted to be called in RCU protected context, no reference taken and released on a contended cache line (fib_clntref) fib_table_lookup() and fib_semantic_match() get an additional parameter. struct fib_info gets an rcu_head field, and is freed after an rcu grace period. Stress test : (Sending 160.000.000 UDP frames on same neighbour, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_HASH) (about same results for FIB_TRIE) Before patch : real 1m31.199s user 0m13.761s sys 23m24.780s After patch: real 1m5.375s user 0m14.997s sys 15m50.115s Before patch Profile : 13044.00 15.4% __ip_route_output_key vmlinux 8438.00 10.0% dst_destroy vmlinux 5983.00 7.1% fib_semantic_match vmlinux 5410.00 6.4% fib_rules_lookup vmlinux 4803.00 5.7% neigh_lookup vmlinux 4420.00 5.2% _raw_spin_lock vmlinux 3883.00 4.6% rt_set_nexthop vmlinux 3261.00 3.9% _raw_read_lock vmlinux 2794.00 3.3% fib_table_lookup vmlinux 2374.00 2.8% neigh_resolve_output vmlinux 2153.00 2.5% dst_alloc vmlinux 1502.00 1.8% _raw_read_lock_bh vmlinux 1484.00 1.8% kmem_cache_alloc vmlinux 1407.00 1.7% eth_header vmlinux 1406.00 1.7% ipv4_dst_destroy vmlinux 1298.00 1.5% __copy_from_user_ll vmlinux 1174.00 1.4% dev_queue_xmit vmlinux 1000.00 1.2% ip_output vmlinux After patch Profile : 13712.00 15.8% dst_destroy vmlinux 8548.00 9.9% __ip_route_output_key vmlinux 7017.00 8.1% neigh_lookup vmlinux 4554.00 5.3% fib_semantic_match vmlinux 4067.00 4.7% _raw_read_lock vmlinux 3491.00 4.0% dst_alloc vmlinux 3186.00 3.7% neigh_resolve_output vmlinux 3103.00 3.6% fib_table_lookup vmlinux 2098.00 2.4% _raw_read_lock_bh vmlinux 2081.00 2.4% kmem_cache_alloc vmlinux 2013.00 2.3% _raw_spin_lock vmlinux 1763.00 2.0% __copy_from_user_ll vmlinux 1763.00 2.0% ip_output vmlinux 1761.00 2.0% ipv4_dst_destroy vmlinux 1631.00 1.9% eth_header vmlinux 1440.00 1.7% _raw_read_unlock_bh vmlinux Reference results, if IP route cache is enabled : real 0m29.718s user 0m10.845s sys 7m37.341s 25213.00 29.5% __ip_route_output_key vmlinux 9011.00 10.5% dst_release vmlinux 4817.00 5.6% ip_push_pending_frames vmlinux 4232.00 5.0% ip_finish_output vmlinux 3940.00 4.6% udp_sendmsg vmlinux 3730.00 4.4% __copy_from_user_ll vmlinux 3716.00 4.4% ip_route_output_flow vmlinux 2451.00 2.9% __xfrm_lookup vmlinux 2221.00 2.6% ip_append_data vmlinux 1718.00 2.0% _raw_spin_lock_bh vmlinux 1655.00 1.9% __alloc_skb vmlinux 1572.00 1.8% sock_wfree vmlinux 1345.00 1.6% kfree vmlinux Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 10:41:36 +00:00
fib: RCU conversion of fib_lookup() fib_lookup() converted to be called in RCU protected context, no reference taken and released on a contended cache line (fib_clntref) fib_table_lookup() and fib_semantic_match() get an additional parameter. struct fib_info gets an rcu_head field, and is freed after an rcu grace period. Stress test : (Sending 160.000.000 UDP frames on same neighbour, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_HASH) (about same results for FIB_TRIE) Before patch : real 1m31.199s user 0m13.761s sys 23m24.780s After patch: real 1m5.375s user 0m14.997s sys 15m50.115s Before patch Profile : 13044.00 15.4% __ip_route_output_key vmlinux 8438.00 10.0% dst_destroy vmlinux 5983.00 7.1% fib_semantic_match vmlinux 5410.00 6.4% fib_rules_lookup vmlinux 4803.00 5.7% neigh_lookup vmlinux 4420.00 5.2% _raw_spin_lock vmlinux 3883.00 4.6% rt_set_nexthop vmlinux 3261.00 3.9% _raw_read_lock vmlinux 2794.00 3.3% fib_table_lookup vmlinux 2374.00 2.8% neigh_resolve_output vmlinux 2153.00 2.5% dst_alloc vmlinux 1502.00 1.8% _raw_read_lock_bh vmlinux 1484.00 1.8% kmem_cache_alloc vmlinux 1407.00 1.7% eth_header vmlinux 1406.00 1.7% ipv4_dst_destroy vmlinux 1298.00 1.5% __copy_from_user_ll vmlinux 1174.00 1.4% dev_queue_xmit vmlinux 1000.00 1.2% ip_output vmlinux After patch Profile : 13712.00 15.8% dst_destroy vmlinux 8548.00 9.9% __ip_route_output_key vmlinux 7017.00 8.1% neigh_lookup vmlinux 4554.00 5.3% fib_semantic_match vmlinux 4067.00 4.7% _raw_read_lock vmlinux 3491.00 4.0% dst_alloc vmlinux 3186.00 3.7% neigh_resolve_output vmlinux 3103.00 3.6% fib_table_lookup vmlinux 2098.00 2.4% _raw_read_lock_bh vmlinux 2081.00 2.4% kmem_cache_alloc vmlinux 2013.00 2.3% _raw_spin_lock vmlinux 1763.00 2.0% __copy_from_user_ll vmlinux 1763.00 2.0% ip_output vmlinux 1761.00 2.0% ipv4_dst_destroy vmlinux 1631.00 1.9% eth_header vmlinux 1440.00 1.7% _raw_read_unlock_bh vmlinux Reference results, if IP route cache is enabled : real 0m29.718s user 0m10.845s sys 7m37.341s 25213.00 29.5% __ip_route_output_key vmlinux 9011.00 10.5% dst_release vmlinux 4817.00 5.6% ip_push_pending_frames vmlinux 4232.00 5.0% ip_finish_output vmlinux 3940.00 4.6% udp_sendmsg vmlinux 3730.00 4.4% __copy_from_user_ll vmlinux 3716.00 4.4% ip_route_output_flow vmlinux 2451.00 2.9% __xfrm_lookup vmlinux 2221.00 2.6% ip_append_data vmlinux 1718.00 2.0% _raw_spin_lock_bh vmlinux 1655.00 1.9% __alloc_skb vmlinux 1572.00 1.8% sock_wfree vmlinux 1345.00 1.6% kfree vmlinux Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 10:41:36 +00:00
ip: Return drop reason if in_dev is NULL in ip_route_input_rcu(). syzkaller reported a warning in __sk_skb_reason_drop(). Commit 61b95c70f344 ("net: ip: make ip_route_input_rcu() return drop reasons") missed a path where -EINVAL is returned. Then, the cited commit started to trigger the warning with the invalid error. Let's fix it by returning SKB_DROP_REASON_NOT_SPECIFIED. [0]: WARNING: CPU: 0 PID: 10 at net/core/skbuff.c:1216 __sk_skb_reason_drop net/core/skbuff.c:1216 [inline] WARNING: CPU: 0 PID: 10 at net/core/skbuff.c:1216 sk_skb_reason_drop+0x97/0x1b0 net/core/skbuff.c:1241 Modules linked in: CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.12.0-10686-gbb18265c3aba #10 1c308307628619808b5a4a0495c4aab5637b0551 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker RIP: 0010:__sk_skb_reason_drop net/core/skbuff.c:1216 [inline] RIP: 0010:sk_skb_reason_drop+0x97/0x1b0 net/core/skbuff.c:1241 Code: 5d 41 5c 41 5d 41 5e e9 e7 9e 95 fd e8 e2 9e 95 fd 31 ff 44 89 e6 e8 58 a1 95 fd 45 85 e4 0f 85 a2 00 00 00 e8 ca 9e 95 fd 90 <0f> 0b 90 e8 c1 9e 95 fd 44 89 e6 bf 01 00 00 00 e8 34 a1 95 fd 41 RSP: 0018:ffa0000000007650 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 000000000000ffff RCX: ffffffff83bc3592 RDX: ff110001002a0000 RSI: ffffffff83bc34d6 RDI: 0000000000000007 RBP: ff11000109ee85f0 R08: 0000000000000001 R09: ffe21c00213dd0da R10: 000000000000ffff R11: 0000000000000000 R12: 00000000ffffffea R13: 0000000000000000 R14: ff11000109ee86d4 R15: ff11000109ee8648 FS: 0000000000000000(0000) GS:ff1100011a000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020177000 CR3: 0000000108a3d006 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <IRQ> kfree_skb_reason include/linux/skbuff.h:1263 [inline] ip_rcv_finish_core.constprop.0+0x896/0x2320 net/ipv4/ip_input.c:424 ip_list_rcv_finish.constprop.0+0x1b2/0x710 net/ipv4/ip_input.c:610 ip_sublist_rcv net/ipv4/ip_input.c:636 [inline] ip_list_rcv+0x34a/0x460 net/ipv4/ip_input.c:670 __netif_receive_skb_list_ptype net/core/dev.c:5715 [inline] __netif_receive_skb_list_core+0x536/0x900 net/core/dev.c:5762 __netif_receive_skb_list net/core/dev.c:5814 [inline] netif_receive_skb_list_internal+0x77c/0xdc0 net/core/dev.c:5905 gro_normal_list include/net/gro.h:515 [inline] gro_normal_list include/net/gro.h:511 [inline] napi_complete_done+0x219/0x8c0 net/core/dev.c:6256 wg_packet_rx_poll+0xbff/0x1e40 drivers/net/wireguard/receive.c:488 __napi_poll.constprop.0+0xb3/0x530 net/core/dev.c:6877 napi_poll net/core/dev.c:6946 [inline] net_rx_action+0x9eb/0xe30 net/core/dev.c:7068 handle_softirqs+0x1ac/0x740 kernel/softirq.c:554 do_softirq kernel/softirq.c:455 [inline] do_softirq+0x48/0x80 kernel/softirq.c:442 </IRQ> <TASK> __local_bh_enable_ip+0xed/0x110 kernel/softirq.c:382 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x3ba/0x580 drivers/net/wireguard/receive.c:499 process_one_work+0x940/0x1a70 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x639/0xe30 kernel/workqueue.c:3391 kthread+0x283/0x350 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 </TASK> Fixes: 82d9983ebeb8 ("net: ip: make ip_route_input_noref() return drop reasons") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20241206020715.80207-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-06 11:07:15 +09:00
fib: RCU conversion of fib_lookup() fib_lookup() converted to be called in RCU protected context, no reference taken and released on a contended cache line (fib_clntref) fib_table_lookup() and fib_semantic_match() get an additional parameter. struct fib_info gets an rcu_head field, and is freed after an rcu grace period. Stress test : (Sending 160.000.000 UDP frames on same neighbour, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_HASH) (about same results for FIB_TRIE) Before patch : real 1m31.199s user 0m13.761s sys 23m24.780s After patch: real 1m5.375s user 0m14.997s sys 15m50.115s Before patch Profile : 13044.00 15.4% __ip_route_output_key vmlinux 8438.00 10.0% dst_destroy vmlinux 5983.00 7.1% fib_semantic_match vmlinux 5410.00 6.4% fib_rules_lookup vmlinux 4803.00 5.7% neigh_lookup vmlinux 4420.00 5.2% _raw_spin_lock vmlinux 3883.00 4.6% rt_set_nexthop vmlinux 3261.00 3.9% _raw_read_lock vmlinux 2794.00 3.3% fib_table_lookup vmlinux 2374.00 2.8% neigh_resolve_output vmlinux 2153.00 2.5% dst_alloc vmlinux 1502.00 1.8% _raw_read_lock_bh vmlinux 1484.00 1.8% kmem_cache_alloc vmlinux 1407.00 1.7% eth_header vmlinux 1406.00 1.7% ipv4_dst_destroy vmlinux 1298.00 1.5% __copy_from_user_ll vmlinux 1174.00 1.4% dev_queue_xmit vmlinux 1000.00 1.2% ip_output vmlinux After patch Profile : 13712.00 15.8% dst_destroy vmlinux 8548.00 9.9% __ip_route_output_key vmlinux 7017.00 8.1% neigh_lookup vmlinux 4554.00 5.3% fib_semantic_match vmlinux 4067.00 4.7% _raw_read_lock vmlinux 3491.00 4.0% dst_alloc vmlinux 3186.00 3.7% neigh_resolve_output vmlinux 3103.00 3.6% fib_table_lookup vmlinux 2098.00 2.4% _raw_read_lock_bh vmlinux 2081.00 2.4% kmem_cache_alloc vmlinux 2013.00 2.3% _raw_spin_lock vmlinux 1763.00 2.0% __copy_from_user_ll vmlinux 1763.00 2.0% ip_output vmlinux 1761.00 2.0% ipv4_dst_destroy vmlinux 1631.00 1.9% eth_header vmlinux 1440.00 1.7% _raw_read_unlock_bh vmlinux Reference results, if IP route cache is enabled : real 0m29.718s user 0m10.845s sys 7m37.341s 25213.00 29.5% __ip_route_output_key vmlinux 9011.00 10.5% dst_release vmlinux 4817.00 5.6% ip_push_pending_frames vmlinux 4232.00 5.0% ip_finish_output vmlinux 3940.00 4.6% udp_sendmsg vmlinux 3730.00 4.4% __copy_from_user_ll vmlinux 3716.00 4.4% ip_route_output_flow vmlinux 2451.00 2.9% __xfrm_lookup vmlinux 2221.00 2.6% ip_append_data vmlinux 1718.00 2.0% _raw_spin_lock_bh vmlinux 1655.00 1.9% __alloc_skb vmlinux 1572.00 1.8% sock_wfree vmlinux 1345.00 1.6% kfree vmlinux Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 10:41:36 +00:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
ipv4: fix fnhe usage by non-cached routes Allow some non-cached routes to use non-expired fnhe: 1. ip_del_fnhe: moved above and now called by find_exception. The 4.5+ commit deed49df7390 expires fnhe only when caching routes. Change that to: 1.1. use fnhe for non-cached local output routes, with the help from (2) 1.2. allow __mkroute_input to detect expired fnhe (outdated fnhe_gw, for example) when do_cache is false, eg. when itag!=0 for unicast destinations. 2. __mkroute_output: keep fi to allow local routes with orig_oif != 0 to use fnhe info even when the new route will not be cached into fnhe. After commit 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") it means all local routes will be affected because they are not cached. This change is used to solve a PMTU problem with IPVS (and probably Netfilter DNAT) setups that redirect local clients from target local IP (local route to Virtual IP) to new remote IP target, eg. IPVS TUN real server. Loopback has 64K MTU and we need to create fnhe on the local route that will keep the reduced PMTU for the Virtual IP. Without this change fnhe_pmtu is updated from ICMP but never exposed to non-cached local routes. This includes routes with flowi4_oif!=0 for 4.6+ and with flowi4_oif=any for 4.14+). 3. update_or_create_fnhe: make sure fnhe_expires is not 0 for new entries Fixes: 839da4d98960 ("net: ipv4: set orig_oif based on fib result for local traffic") Fixes: d6d5e999e5df ("route: do not cache fib route info on local routes with oif") Fixes: deed49df7390 ("route: check and remove route cache when we get route") Cc: David Ahern <dsahern@gmail.com> Cc: Xin Long <lucien.xin@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 09:41:19 +03:00
net: ipv4: Add ip_mr_output() Multicast routing is today handled in the input path. Locally generated MC packets don't hit the IPMR code today. Thus if a VXLAN remote address is multicast, the driver needs to set an OIF during route lookup. Thus MC routing configuration needs to be kept in sync with the VXLAN FDB and MDB. Ideally, the VXLAN packets would be routed by the MC routing code instead. To that end, this patch adds support to route locally generated multicast packets. The newly-added routines do largely what ip_mr_input() and ip_mr_forward() do: make an MR cache lookup to find where to send the packets, and use ip_mc_output() to send each of them. When no cache entry is found, the packet is punted to the daemon for resolution. However, an installation that uses a VXLAN underlay netdevice for which it also has matching MC routes, would get a different routing with this patch. Previously, the MC packets would be delivered directly to the underlay port, whereas now they would be MC-routed. In order to avoid this change in behavior, introduce an IPCB flag. Only if the flag is set will ip_mr_output() actually engage, otherwise it reverts to ip_mc_output(). This code is based on work by Roopa Prabhu and Nikolay Aleksandrov. Signed-off-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/0aadbd49330471c0f758d54afb05eb3b6e3a6b65.1750113335.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17 00:44:12 +02:00
ipv4: fix uninit-value in ip_route_output_key_hash_rcu() syzbot complained that res.type could be used while not initialized. Using RTN_UNSPEC as initial value seems better than using garbage. BUG: KMSAN: uninit-value in __mkroute_output net/ipv4/route.c:2200 [inline] BUG: KMSAN: uninit-value in ip_route_output_key_hash_rcu+0x31f0/0x3940 net/ipv4/route.c:2493 CPU: 1 PID: 12207 Comm: syz-executor0 Not tainted 4.16.0+ #81 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 __mkroute_output net/ipv4/route.c:2200 [inline] ip_route_output_key_hash_rcu+0x31f0/0x3940 net/ipv4/route.c:2493 ip_route_output_key_hash net/ipv4/route.c:2322 [inline] __ip_route_output_key include/net/route.h:126 [inline] ip_route_output_flow+0x1eb/0x3c0 net/ipv4/route.c:2577 raw_sendmsg+0x1861/0x3ed0 net/ipv4/raw.c:653 inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] SYSC_sendto+0x6c3/0x7e0 net/socket.c:1747 SyS_sendto+0x8a/0xb0 net/socket.c:1715 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x455259 RSP: 002b:00007fdc0625dc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fdc0625e6d4 RCX: 0000000000455259 RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000013 RBP: 000000000072bea0 R08: 0000000020000080 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000004f7 R14: 00000000006fa7c8 R15: 0000000000000000 Local variable description: ----res.i.i@ip_route_output_flow Variable was created at: ip_route_output_flow+0x75/0x3c0 net/ipv4/route.c:2576 raw_sendmsg+0x1861/0x3ed0 net/ipv4/raw.c:653 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-07 13:42:42 -07:00
ipv4: Return -ENETUNREACH if we can't create route but saddr is valid ...instead of -EINVAL. An issue was found with older kernel versions while unplugging a NFS client with pending RPCs, and the wrong error code here prevented it from recovering once link is back up with a configured address. Incidentally, this is not an issue anymore since commit 4f8943f80883 ("SUNRPC: Replace direct task wakeups from softirq context"), included in 5.2-rc7, had the effect of decoupling the forwarding of this error by using SO_ERROR in xs_wake_error(), as pointed out by Benjamin Coddington. To the best of my knowledge, this isn't currently causing any further issue, but the error code doesn't look appropriate anyway, and we might hit this in other paths as well. In detail, as analysed by Gonzalo Siero, once the route is deleted because the interface is down, and can't be resolved and we return -EINVAL here, this ends up, courtesy of inet_sk_rebuild_header(), as the socket error seen by tcp_write_err(), called by tcp_retransmit_timer(). In turn, tcp_write_err() indirectly calls xs_error_report(), which wakes up the RPC pending tasks with a status of -EINVAL. This is then seen by call_status() in the SUN RPC implementation, which aborts the RPC call calling rpc_exit(), instead of handling this as a potentially temporary condition, i.e. as a timeout. Return -EINVAL only if the input parameters passed to ip_route_output_key_hash_rcu() are actually invalid (this is the case if the specified source address is multicast, limited broadcast or all zeroes), but return -ENETUNREACH in all cases where, at the given moment, the given source address doesn't allow resolving the route. While at it, drop the initialisation of err to -ENETUNREACH, which was added to __ip_route_output_key() back then by commit 0315e3827048 ("net: Fix behaviour of unreachable, blackhole and prohibit routes"), but actually had no effect, as it was, and is, overwritten by the fib_lookup() return code assignment, and anyway ignored in all other branches, including the if (fl4->saddr) one: I find this rather confusing, as it would look like -ENETUNREACH is the "default" error, while that statement has no effect. Also note that after commit fc75fc8339e7 ("ipv4: dont create routes on down devices"), we would get -ENETUNREACH if the device is down, but -EINVAL if the source address is specified and we can't resolve the route, and this appears to be rather inconsistent. Reported-by: Stefan Walter <walteste@inf.ethz.ch> Analysed-by: Benjamin Coddington <bcodding@redhat.com> Analysed-by: Gonzalo Siero <gsierohu@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-16 20:52:09 +02:00
ipv4: Return -ENETUNREACH if we can't create route but saddr is valid ...instead of -EINVAL. An issue was found with older kernel versions while unplugging a NFS client with pending RPCs, and the wrong error code here prevented it from recovering once link is back up with a configured address. Incidentally, this is not an issue anymore since commit 4f8943f80883 ("SUNRPC: Replace direct task wakeups from softirq context"), included in 5.2-rc7, had the effect of decoupling the forwarding of this error by using SO_ERROR in xs_wake_error(), as pointed out by Benjamin Coddington. To the best of my knowledge, this isn't currently causing any further issue, but the error code doesn't look appropriate anyway, and we might hit this in other paths as well. In detail, as analysed by Gonzalo Siero, once the route is deleted because the interface is down, and can't be resolved and we return -EINVAL here, this ends up, courtesy of inet_sk_rebuild_header(), as the socket error seen by tcp_write_err(), called by tcp_retransmit_timer(). In turn, tcp_write_err() indirectly calls xs_error_report(), which wakes up the RPC pending tasks with a status of -EINVAL. This is then seen by call_status() in the SUN RPC implementation, which aborts the RPC call calling rpc_exit(), instead of handling this as a potentially temporary condition, i.e. as a timeout. Return -EINVAL only if the input parameters passed to ip_route_output_key_hash_rcu() are actually invalid (this is the case if the specified source address is multicast, limited broadcast or all zeroes), but return -ENETUNREACH in all cases where, at the given moment, the given source address doesn't allow resolving the route. While at it, drop the initialisation of err to -ENETUNREACH, which was added to __ip_route_output_key() back then by commit 0315e3827048 ("net: Fix behaviour of unreachable, blackhole and prohibit routes"), but actually had no effect, as it was, and is, overwritten by the fib_lookup() return code assignment, and anyway ignored in all other branches, including the if (fl4->saddr) one: I find this rather confusing, as it would look like -ENETUNREACH is the "default" error, while that statement has no effect. Also note that after commit fc75fc8339e7 ("ipv4: dont create routes on down devices"), we would get -ENETUNREACH if the device is down, but -EINVAL if the source address is specified and we can't resolve the route, and this appears to be rather inconsistent. Reported-by: Stefan Walter <walteste@inf.ethz.ch> Analysed-by: Benjamin Coddington <bcodding@redhat.com> Analysed-by: Gonzalo Siero <gsierohu@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-16 20:52:09 +02:00
ipv4: Return -ENETUNREACH if we can't create route but saddr is valid ...instead of -EINVAL. An issue was found with older kernel versions while unplugging a NFS client with pending RPCs, and the wrong error code here prevented it from recovering once link is back up with a configured address. Incidentally, this is not an issue anymore since commit 4f8943f80883 ("SUNRPC: Replace direct task wakeups from softirq context"), included in 5.2-rc7, had the effect of decoupling the forwarding of this error by using SO_ERROR in xs_wake_error(), as pointed out by Benjamin Coddington. To the best of my knowledge, this isn't currently causing any further issue, but the error code doesn't look appropriate anyway, and we might hit this in other paths as well. In detail, as analysed by Gonzalo Siero, once the route is deleted because the interface is down, and can't be resolved and we return -EINVAL here, this ends up, courtesy of inet_sk_rebuild_header(), as the socket error seen by tcp_write_err(), called by tcp_retransmit_timer(). In turn, tcp_write_err() indirectly calls xs_error_report(), which wakes up the RPC pending tasks with a status of -EINVAL. This is then seen by call_status() in the SUN RPC implementation, which aborts the RPC call calling rpc_exit(), instead of handling this as a potentially temporary condition, i.e. as a timeout. Return -EINVAL only if the input parameters passed to ip_route_output_key_hash_rcu() are actually invalid (this is the case if the specified source address is multicast, limited broadcast or all zeroes), but return -ENETUNREACH in all cases where, at the given moment, the given source address doesn't allow resolving the route. While at it, drop the initialisation of err to -ENETUNREACH, which was added to __ip_route_output_key() back then by commit 0315e3827048 ("net: Fix behaviour of unreachable, blackhole and prohibit routes"), but actually had no effect, as it was, and is, overwritten by the fib_lookup() return code assignment, and anyway ignored in all other branches, including the if (fl4->saddr) one: I find this rather confusing, as it would look like -ENETUNREACH is the "default" error, while that statement has no effect. Also note that after commit fc75fc8339e7 ("ipv4: dont create routes on down devices"), we would get -ENETUNREACH if the device is down, but -EINVAL if the source address is specified and we can't resolve the route, and this appears to be rather inconsistent. Reported-by: Stefan Walter <walteste@inf.ethz.ch> Analysed-by: Benjamin Coddington <bcodding@redhat.com> Analysed-by: Gonzalo Siero <gsierohu@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-16 20:52:09 +02:00
net: Add l3mdev index to flow struct and avoid oif reset for port devices The fundamental premise of VRF and l3mdev core code is binding a socket to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope. Legacy code resets flowi_oif to the l3mdev losing any original port device binding. Ben (among others) has demonstrated use cases where the original port device binding is important and needs to be retained. This patch handles that by adding a new entry to the common flow struct that can indicate the l3mdev index for later rule and table matching avoiding the need to reset flowi_oif. In addition to allowing more use cases that require port device binds, this patch brings a few datapath simplications: 1. l3mdev_fib_rule_match is only called when walking fib rules and always after l3mdev_update_flow. That allows an optimization to bail early for non-VRF type uses cases when flowi_l3mdev is not set. Also, only that index needs to be checked for the FIB table id. 2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev (e.g., VRF) device. By resetting flowi_oif only for this case the FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed, removing several checks in the datapath. The flowi_iif path can be simplified to only be called if the it is not loopback (loopback can not be assigned to an L3 domain) and the l3mdev index is not already set. 3. Avoid another device lookup in the output path when the fib lookup returns a reject failure. Note: 2 functional tests for local traffic with reject fib rules are updated to reflect the new direct failure at FIB lookup time for ping rather than the failure on packet path. The current code fails like this: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: Warning: source address might be selected on device other than: eth1 PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data. --- 172.16.3.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms where the test now directly fails: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: connect: No route to host Signed-off-by: David Ahern <dsahern@kernel.org> Tested-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-14 14:45:51 -06:00
ipv4: Avoid caching l3mdev dst on mismatched local route David reported that doing the following: ip li add red type vrf table 10 ip link set dev eth1 vrf red ip addr add 127.0.0.1/8 dev red ip link set dev eth1 up ip li set red up ping -c1 -w1 -I red 127.0.0.1 ip li del red when either policy routing IP rules are present or the local table lookup ip rule is before the l3mdev lookup results in a hang with these messages: unregister_netdevice: waiting for red to become free. Usage count = 1 The problem is caused by caching the dst used for sending the packet out of the specified interface on a local route with a different nexthop interface. Thus the dst could stay around until the route in the table the lookup was done is deleted which may be never. Address the problem by not forcing output device to be the l3mdev in the flow's output interface if the lookup didn't use the l3mdev. This then results in the dst using the right device according to the route. Changes in v2: - make the dev_out passed in by __ip_route_output_key_hash correct instead of checking the nh dev if FLOWI_FLAG_SKIP_NH_OIF is set as suggested by David. Fixes: 5f02ce24c2696 ("net: l3mdev: Allow the l3mdev to be a loopback") Reported-by: David Ahern <dsa@cumulusnetworks.com> Suggested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Robert Shearman <rshearma@brocade.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21 21:34:59 +01:00
net: ipv4: set orig_oif based on fib result for local traffic Attempts to connect to a local address with a socket bound to a device with the local address hangs if there is no listener: $ ip addr sh dev eth1 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 02:e0:f9:1c:00:37 brd ff:ff:ff:ff:ff:ff inet 10.100.1.4/24 scope global eth1 valid_lft forever preferred_lft forever inet6 2001:db8:1::4/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:37/64 scope link valid_lft forever preferred_lft forever $ vrf-test -I eth1 -r 10.100.1.4 <hangs when there is no server> (don't let the command name fool you; vrf-test works without vrfs.) The problem is that the original intended device, eth1 in this case, is lost when the tcp reset is sent, so the socket lookup does not find a match for the reset and the connect attempt hangs. Fix by adjusting orig_oif for local traffic to the device from the fib lookup result. With this patch you get the more user friendly: $ vrf-test -I eth1 -r 10.100.1.4 connect failed: 111: Connection refused orig_oif is saved to the newly created rtable as rt_iif and when set it is used as the dif for socket lookups. It is set based on flowi4_oif passed in to ip_route_output_key_hash_rcu and will be set to either the loopback device, an l3mdev device, nothing (flowi4_oif = 0 which is the case in the example above) or a netdev index depending on the lookup path. In each case, resetting orig_oif to the device in the fib result for the RTN_LOCAL case allows the actual device to be preserved as the skb tx and rx is done over the loopback or VRF device. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10 13:49:10 -07:00
net: route dump netlink NLM_F_MULTI flag missing An excerpt from netlink(7) man page, In multipart messages (multiple nlmsghdr headers with associated payload in one byte stream) the first and all following headers have the NLM_F_MULTI flag set, except for the last header which has the type NLMSG_DONE. but, after (ee28906) there is a missing NLM_F_MULTI flag in the middle of a FIB dump. The result is user space applications following above man page excerpt may get confused and may stop parsing msg believing something went wrong. In the golang netlink lib [0] the library logic stops parsing believing the message is not a multipart message. Found this running Cilium[1] against net-next while adding a feature to auto-detect routes. I noticed with multiple route tables we no longer could detect the default routes on net tree kernels because the library logic was not returning them. Fix this by handling the fib_dump_info_fnhe() case the same way the fib_dump_info() handles it by passing the flags argument through the call chain and adding a flags argument to rt_fill_info(). Tested with Cilium stack and auto-detection of routes works again. Also annotated libs to dump netlink msgs and inspected NLM_F_MULTI and NLMSG_DONE flags look correct after this. Note: In inet_rtm_getroute() pass rt_fill_info() '0' for flags the same as is done for fib_dump_info() so this looks correct to me. [0] https://github.com/vishvananda/netlink/ [1] https://github.com/cilium/ Fixes: ee28906fd7a14 ("ipv4: Dump route exceptions if requested") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23 17:11:38 -07:00
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 22:09:00 +01:00
ipv4: Dump route exceptions if requested Since commit 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions."), cached exception routes are stored as a separate entity, so they are not dumped on a FIB dump, even if the RTM_F_CLONED flag is passed. This implies that the command 'ip route list cache' doesn't return any result anymore. If the RTM_F_CLONED is passed, and strict checking requested, retrieve nexthop exception routes and dump them. If no strict checking is requested, filtering can't be performed consistently: dump everything in that case. With this, we need to add an argument to the netlink callback in order to track how many entries were already dumped for the last leaf included in a partial netlink dump. A single additional argument is sufficient, even if we traverse logically nested structures (nexthop objects, hash table buckets, bucket chains): it doesn't matter if we stop in the middle of any of those, because they are always traversed the same way. As an example, s_i values in [], s_fa values in (): node (fa) #1 [1] nexthop #1 bucket #1 -> #0 in chain (1) bucket #2 -> #0 in chain (2) -> #1 in chain (3) -> #2 in chain (4) bucket #3 -> #0 in chain (5) -> #1 in chain (6) nexthop #2 bucket #1 -> #0 in chain (7) -> #1 in chain (8) bucket #2 -> #0 in chain (9) -- node (fa) #2 [2] nexthop #1 bucket #1 -> #0 in chain (1) -> #1 in chain (2) bucket #2 -> #0 in chain (3) it doesn't matter if we stop at (3), (4), (7) for "node #1", or at (2) for "node #2": walking flattens all that. It would even be possible to drop the distinction between the in-tree (s_i) and in-node (s_fa) counter, but a further improvement might advise against this. This is only as accurate as the existing tracking mechanism for leaves: if a partial dump is restarted after exceptions are removed or expired, we might skip some non-dumped entries. To improve this, we could attach a 'sernum' attribute (similar to the one used for IPv6) to nexthop entities, and bump this counter whenever exceptions change: having a distinction between the two counters would make this more convenient. Listing of exception routes (modified routes pre-3.5) was tested against these versions of kernel and iproute2: iproute2 kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 3.5-rc4 + + + + + 4.4 4.9 4.14 4.15 4.19 5.0 5.1 fixed + + + + + v7: - Move loop over nexthop objects to route.c, and pass struct fib_info and table ID to it, not a struct fib_alias (suggested by David Ahern) - While at it, note that the NULL check on fa->fa_info is redundant, and the check on RTNH_F_DEAD is also not consistent with what's done with regular route listing: just keep it for nhc_flags - Rename entry point function for dumping exceptions to fib_dump_info_fnhe(), and rearrange arguments for consistency with fib_dump_info() - Rename fnhe_dump_buckets() to fnhe_dump_bucket() and make it handle one bucket at a time - Expand commit message to describe why we can have a single "skip" counter for all exceptions stored in bucket chains in nexthop objects (suggested by David Ahern) v6: - Rebased onto net-next - Loop over nexthop paths too. Move loop over fnhe buckets to route.c, avoids need to export rt_fill_info() and to touch exceptions from fib_trie.c. Pass NULL as flow to rt_fill_info(), it now allows that (suggested by David Ahern) Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21 17:45:23 +02:00
net: route dump netlink NLM_F_MULTI flag missing An excerpt from netlink(7) man page, In multipart messages (multiple nlmsghdr headers with associated payload in one byte stream) the first and all following headers have the NLM_F_MULTI flag set, except for the last header which has the type NLMSG_DONE. but, after (ee28906) there is a missing NLM_F_MULTI flag in the middle of a FIB dump. The result is user space applications following above man page excerpt may get confused and may stop parsing msg believing something went wrong. In the golang netlink lib [0] the library logic stops parsing believing the message is not a multipart message. Found this running Cilium[1] against net-next while adding a feature to auto-detect routes. I noticed with multiple route tables we no longer could detect the default routes on net tree kernels because the library logic was not returning them. Fix this by handling the fib_dump_info_fnhe() case the same way the fib_dump_info() handles it by passing the flags argument through the call chain and adding a flags argument to rt_fill_info(). Tested with Cilium stack and auto-detection of routes works again. Also annotated libs to dump netlink msgs and inspected NLM_F_MULTI and NLMSG_DONE flags look correct after this. Note: In inet_rtm_getroute() pass rt_fill_info() '0' for flags the same as is done for fib_dump_info() so this looks correct to me. [0] https://github.com/vishvananda/netlink/ [1] https://github.com/cilium/ Fixes: ee28906fd7a14 ("ipv4: Dump route exceptions if requested") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23 17:11:38 -07:00
ipv4: Dump route exceptions if requested Since commit 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions."), cached exception routes are stored as a separate entity, so they are not dumped on a FIB dump, even if the RTM_F_CLONED flag is passed. This implies that the command 'ip route list cache' doesn't return any result anymore. If the RTM_F_CLONED is passed, and strict checking requested, retrieve nexthop exception routes and dump them. If no strict checking is requested, filtering can't be performed consistently: dump everything in that case. With this, we need to add an argument to the netlink callback in order to track how many entries were already dumped for the last leaf included in a partial netlink dump. A single additional argument is sufficient, even if we traverse logically nested structures (nexthop objects, hash table buckets, bucket chains): it doesn't matter if we stop in the middle of any of those, because they are always traversed the same way. As an example, s_i values in [], s_fa values in (): node (fa) #1 [1] nexthop #1 bucket #1 -> #0 in chain (1) bucket #2 -> #0 in chain (2) -> #1 in chain (3) -> #2 in chain (4) bucket #3 -> #0 in chain (5) -> #1 in chain (6) nexthop #2 bucket #1 -> #0 in chain (7) -> #1 in chain (8) bucket #2 -> #0 in chain (9) -- node (fa) #2 [2] nexthop #1 bucket #1 -> #0 in chain (1) -> #1 in chain (2) bucket #2 -> #0 in chain (3) it doesn't matter if we stop at (3), (4), (7) for "node #1", or at (2) for "node #2": walking flattens all that. It would even be possible to drop the distinction between the in-tree (s_i) and in-node (s_fa) counter, but a further improvement might advise against this. This is only as accurate as the existing tracking mechanism for leaves: if a partial dump is restarted after exceptions are removed or expired, we might skip some non-dumped entries. To improve this, we could attach a 'sernum' attribute (similar to the one used for IPv6) to nexthop entities, and bump this counter whenever exceptions change: having a distinction between the two counters would make this more convenient. Listing of exception routes (modified routes pre-3.5) was tested against these versions of kernel and iproute2: iproute2 kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 3.5-rc4 + + + + + 4.4 4.9 4.14 4.15 4.19 5.0 5.1 fixed + + + + + v7: - Move loop over nexthop objects to route.c, and pass struct fib_info and table ID to it, not a struct fib_alias (suggested by David Ahern) - While at it, note that the NULL check on fa->fa_info is redundant, and the check on RTNH_F_DEAD is also not consistent with what's done with regular route listing: just keep it for nhc_flags - Rename entry point function for dumping exceptions to fib_dump_info_fnhe(), and rearrange arguments for consistency with fib_dump_info() - Rename fnhe_dump_buckets() to fnhe_dump_bucket() and make it handle one bucket at a time - Expand commit message to describe why we can have a single "skip" counter for all exceptions stored in bucket chains in nexthop objects (suggested by David Ahern) v6: - Rebased onto net-next - Loop over nexthop paths too. Move loop over fnhe buckets to route.c, avoids need to export rt_fill_info() and to touch exceptions from fib_trie.c. Pass NULL as flow to rt_fill_info(), it now allows that (suggested by David Ahern) Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21 17:45:23 +02:00
ipv4: Dump route exceptions if requested Since commit 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions."), cached exception routes are stored as a separate entity, so they are not dumped on a FIB dump, even if the RTM_F_CLONED flag is passed. This implies that the command 'ip route list cache' doesn't return any result anymore. If the RTM_F_CLONED is passed, and strict checking requested, retrieve nexthop exception routes and dump them. If no strict checking is requested, filtering can't be performed consistently: dump everything in that case. With this, we need to add an argument to the netlink callback in order to track how many entries were already dumped for the last leaf included in a partial netlink dump. A single additional argument is sufficient, even if we traverse logically nested structures (nexthop objects, hash table buckets, bucket chains): it doesn't matter if we stop in the middle of any of those, because they are always traversed the same way. As an example, s_i values in [], s_fa values in (): node (fa) #1 [1] nexthop #1 bucket #1 -> #0 in chain (1) bucket #2 -> #0 in chain (2) -> #1 in chain (3) -> #2 in chain (4) bucket #3 -> #0 in chain (5) -> #1 in chain (6) nexthop #2 bucket #1 -> #0 in chain (7) -> #1 in chain (8) bucket #2 -> #0 in chain (9) -- node (fa) #2 [2] nexthop #1 bucket #1 -> #0 in chain (1) -> #1 in chain (2) bucket #2 -> #0 in chain (3) it doesn't matter if we stop at (3), (4), (7) for "node #1", or at (2) for "node #2": walking flattens all that. It would even be possible to drop the distinction between the in-tree (s_i) and in-node (s_fa) counter, but a further improvement might advise against this. This is only as accurate as the existing tracking mechanism for leaves: if a partial dump is restarted after exceptions are removed or expired, we might skip some non-dumped entries. To improve this, we could attach a 'sernum' attribute (similar to the one used for IPv6) to nexthop entities, and bump this counter whenever exceptions change: having a distinction between the two counters would make this more convenient. Listing of exception routes (modified routes pre-3.5) was tested against these versions of kernel and iproute2: iproute2 kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 3.5-rc4 + + + + + 4.4 4.9 4.14 4.15 4.19 5.0 5.1 fixed + + + + + v7: - Move loop over nexthop objects to route.c, and pass struct fib_info and table ID to it, not a struct fib_alias (suggested by David Ahern) - While at it, note that the NULL check on fa->fa_info is redundant, and the check on RTNH_F_DEAD is also not consistent with what's done with regular route listing: just keep it for nhc_flags - Rename entry point function for dumping exceptions to fib_dump_info_fnhe(), and rearrange arguments for consistency with fib_dump_info() - Rename fnhe_dump_buckets() to fnhe_dump_bucket() and make it handle one bucket at a time - Expand commit message to describe why we can have a single "skip" counter for all exceptions stored in bucket chains in nexthop objects (suggested by David Ahern) v6: - Rebased onto net-next - Loop over nexthop paths too. Move loop over fnhe buckets to route.c, avoids need to export rt_fill_info() and to touch exceptions from fib_trie.c. Pass NULL as flow to rt_fill_info(), it now allows that (suggested by David Ahern) Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21 17:45:23 +02:00
net: route dump netlink NLM_F_MULTI flag missing An excerpt from netlink(7) man page, In multipart messages (multiple nlmsghdr headers with associated payload in one byte stream) the first and all following headers have the NLM_F_MULTI flag set, except for the last header which has the type NLMSG_DONE. but, after (ee28906) there is a missing NLM_F_MULTI flag in the middle of a FIB dump. The result is user space applications following above man page excerpt may get confused and may stop parsing msg believing something went wrong. In the golang netlink lib [0] the library logic stops parsing believing the message is not a multipart message. Found this running Cilium[1] against net-next while adding a feature to auto-detect routes. I noticed with multiple route tables we no longer could detect the default routes on net tree kernels because the library logic was not returning them. Fix this by handling the fib_dump_info_fnhe() case the same way the fib_dump_info() handles it by passing the flags argument through the call chain and adding a flags argument to rt_fill_info(). Tested with Cilium stack and auto-detection of routes works again. Also annotated libs to dump netlink msgs and inspected NLM_F_MULTI and NLMSG_DONE flags look correct after this. Note: In inet_rtm_getroute() pass rt_fill_info() '0' for flags the same as is done for fib_dump_info() so this looks correct to me. [0] https://github.com/vishvananda/netlink/ [1] https://github.com/cilium/ Fixes: ee28906fd7a14 ("ipv4: Dump route exceptions if requested") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23 17:11:38 -07:00
ipv4: Dump route exceptions if requested Since commit 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions."), cached exception routes are stored as a separate entity, so they are not dumped on a FIB dump, even if the RTM_F_CLONED flag is passed. This implies that the command 'ip route list cache' doesn't return any result anymore. If the RTM_F_CLONED is passed, and strict checking requested, retrieve nexthop exception routes and dump them. If no strict checking is requested, filtering can't be performed consistently: dump everything in that case. With this, we need to add an argument to the netlink callback in order to track how many entries were already dumped for the last leaf included in a partial netlink dump. A single additional argument is sufficient, even if we traverse logically nested structures (nexthop objects, hash table buckets, bucket chains): it doesn't matter if we stop in the middle of any of those, because they are always traversed the same way. As an example, s_i values in [], s_fa values in (): node (fa) #1 [1] nexthop #1 bucket #1 -> #0 in chain (1) bucket #2 -> #0 in chain (2) -> #1 in chain (3) -> #2 in chain (4) bucket #3 -> #0 in chain (5) -> #1 in chain (6) nexthop #2 bucket #1 -> #0 in chain (7) -> #1 in chain (8) bucket #2 -> #0 in chain (9) -- node (fa) #2 [2] nexthop #1 bucket #1 -> #0 in chain (1) -> #1 in chain (2) bucket #2 -> #0 in chain (3) it doesn't matter if we stop at (3), (4), (7) for "node #1", or at (2) for "node #2": walking flattens all that. It would even be possible to drop the distinction between the in-tree (s_i) and in-node (s_fa) counter, but a further improvement might advise against this. This is only as accurate as the existing tracking mechanism for leaves: if a partial dump is restarted after exceptions are removed or expired, we might skip some non-dumped entries. To improve this, we could attach a 'sernum' attribute (similar to the one used for IPv6) to nexthop entities, and bump this counter whenever exceptions change: having a distinction between the two counters would make this more convenient. Listing of exception routes (modified routes pre-3.5) was tested against these versions of kernel and iproute2: iproute2 kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 3.5-rc4 + + + + + 4.4 4.9 4.14 4.15 4.19 5.0 5.1 fixed + + + + + v7: - Move loop over nexthop objects to route.c, and pass struct fib_info and table ID to it, not a struct fib_alias (suggested by David Ahern) - While at it, note that the NULL check on fa->fa_info is redundant, and the check on RTNH_F_DEAD is also not consistent with what's done with regular route listing: just keep it for nhc_flags - Rename entry point function for dumping exceptions to fib_dump_info_fnhe(), and rearrange arguments for consistency with fib_dump_info() - Rename fnhe_dump_buckets() to fnhe_dump_bucket() and make it handle one bucket at a time - Expand commit message to describe why we can have a single "skip" counter for all exceptions stored in bucket chains in nexthop objects (suggested by David Ahern) v6: - Rebased onto net-next - Loop over nexthop paths too. Move loop over fnhe buckets to route.c, avoids need to export rt_fill_info() and to touch exceptions from fib_trie.c. Pass NULL as flow to rt_fill_info(), it now allows that (suggested by David Ahern) Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21 17:45:23 +02:00
net: route dump netlink NLM_F_MULTI flag missing An excerpt from netlink(7) man page, In multipart messages (multiple nlmsghdr headers with associated payload in one byte stream) the first and all following headers have the NLM_F_MULTI flag set, except for the last header which has the type NLMSG_DONE. but, after (ee28906) there is a missing NLM_F_MULTI flag in the middle of a FIB dump. The result is user space applications following above man page excerpt may get confused and may stop parsing msg believing something went wrong. In the golang netlink lib [0] the library logic stops parsing believing the message is not a multipart message. Found this running Cilium[1] against net-next while adding a feature to auto-detect routes. I noticed with multiple route tables we no longer could detect the default routes on net tree kernels because the library logic was not returning them. Fix this by handling the fib_dump_info_fnhe() case the same way the fib_dump_info() handles it by passing the flags argument through the call chain and adding a flags argument to rt_fill_info(). Tested with Cilium stack and auto-detection of routes works again. Also annotated libs to dump netlink msgs and inspected NLM_F_MULTI and NLMSG_DONE flags look correct after this. Note: In inet_rtm_getroute() pass rt_fill_info() '0' for flags the same as is done for fib_dump_info() so this looks correct to me. [0] https://github.com/vishvananda/netlink/ [1] https://github.com/cilium/ Fixes: ee28906fd7a14 ("ipv4: Dump route exceptions if requested") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23 17:11:38 -07:00
ipv4: Dump route exceptions if requested Since commit 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions."), cached exception routes are stored as a separate entity, so they are not dumped on a FIB dump, even if the RTM_F_CLONED flag is passed. This implies that the command 'ip route list cache' doesn't return any result anymore. If the RTM_F_CLONED is passed, and strict checking requested, retrieve nexthop exception routes and dump them. If no strict checking is requested, filtering can't be performed consistently: dump everything in that case. With this, we need to add an argument to the netlink callback in order to track how many entries were already dumped for the last leaf included in a partial netlink dump. A single additional argument is sufficient, even if we traverse logically nested structures (nexthop objects, hash table buckets, bucket chains): it doesn't matter if we stop in the middle of any of those, because they are always traversed the same way. As an example, s_i values in [], s_fa values in (): node (fa) #1 [1] nexthop #1 bucket #1 -> #0 in chain (1) bucket #2 -> #0 in chain (2) -> #1 in chain (3) -> #2 in chain (4) bucket #3 -> #0 in chain (5) -> #1 in chain (6) nexthop #2 bucket #1 -> #0 in chain (7) -> #1 in chain (8) bucket #2 -> #0 in chain (9) -- node (fa) #2 [2] nexthop #1 bucket #1 -> #0 in chain (1) -> #1 in chain (2) bucket #2 -> #0 in chain (3) it doesn't matter if we stop at (3), (4), (7) for "node #1", or at (2) for "node #2": walking flattens all that. It would even be possible to drop the distinction between the in-tree (s_i) and in-node (s_fa) counter, but a further improvement might advise against this. This is only as accurate as the existing tracking mechanism for leaves: if a partial dump is restarted after exceptions are removed or expired, we might skip some non-dumped entries. To improve this, we could attach a 'sernum' attribute (similar to the one used for IPv6) to nexthop entities, and bump this counter whenever exceptions change: having a distinction between the two counters would make this more convenient. Listing of exception routes (modified routes pre-3.5) was tested against these versions of kernel and iproute2: iproute2 kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 3.5-rc4 + + + + + 4.4 4.9 4.14 4.15 4.19 5.0 5.1 fixed + + + + + v7: - Move loop over nexthop objects to route.c, and pass struct fib_info and table ID to it, not a struct fib_alias (suggested by David Ahern) - While at it, note that the NULL check on fa->fa_info is redundant, and the check on RTNH_F_DEAD is also not consistent with what's done with regular route listing: just keep it for nhc_flags - Rename entry point function for dumping exceptions to fib_dump_info_fnhe(), and rearrange arguments for consistency with fib_dump_info() - Rename fnhe_dump_buckets() to fnhe_dump_bucket() and make it handle one bucket at a time - Expand commit message to describe why we can have a single "skip" counter for all exceptions stored in bucket chains in nexthop objects (suggested by David Ahern) v6: - Rebased onto net-next - Loop over nexthop paths too. Move loop over fnhe buckets to route.c, avoids need to export rt_fill_info() and to touch exceptions from fib_trie.c. Pass NULL as flow to rt_fill_info(), it now allows that (suggested by David Ahern) Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21 17:45:23 +02:00
ipv4: fix suspicious RCU usage in fib_dump_info_fnhe() sysbot reported that we lack appropriate rcu_read_lock() protection in fib_dump_info_fnhe() net/ipv4/route.c:2875 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor609/8966: #0: 00000000b7dbe288 (rtnl_mutex){+.+.}, at: netlink_dump+0xe7/0xfb0 net/netlink/af_netlink.c:2199 stack backtrace: CPU: 0 PID: 8966 Comm: syz-executor609 Not tainted 5.2.0-rc5+ #43 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5250 fib_dump_info_fnhe+0x9d9/0x1080 net/ipv4/route.c:2875 fn_trie_dump_leaf net/ipv4/fib_trie.c:2141 [inline] fib_table_dump+0x64a/0xd00 net/ipv4/fib_trie.c:2175 inet_dump_fib+0x83c/0xa90 net/ipv4/fib_frontend.c:1004 rtnl_dump_all+0x295/0x490 net/core/rtnetlink.c:3445 netlink_dump+0x558/0xfb0 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x5b1/0x7d0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:226 [inline] rtnetlink_rcv_msg+0x73d/0xb00 net/core/rtnetlink.c:5182 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5237 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:646 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:665 sock_write_iter+0x27c/0x3e0 net/socket.c:994 call_write_iter include/linux/fs.h:1872 [inline] new_sync_write+0x4d3/0x770 fs/read_write.c:483 __vfs_write+0xe1/0x110 fs/read_write.c:496 vfs_write+0x20c/0x580 fs/read_write.c:558 ksys_write+0x14f/0x290 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:620 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4401b9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc8e134978 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401b9 RDX: 000000000000001c RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000000000010 R11: 0000000000000246 R12: 0000000000401a40 R13: 0000000000401ad0 R14: 0000000000000000 R15: 0000000000000000 Fixes: ee28906fd7a1 ("ipv4: Dump route exceptions if requested") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: David Ahern <dsahern@gmail.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 03:04:50 -07:00
ipv4: Dump route exceptions if requested Since commit 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions."), cached exception routes are stored as a separate entity, so they are not dumped on a FIB dump, even if the RTM_F_CLONED flag is passed. This implies that the command 'ip route list cache' doesn't return any result anymore. If the RTM_F_CLONED is passed, and strict checking requested, retrieve nexthop exception routes and dump them. If no strict checking is requested, filtering can't be performed consistently: dump everything in that case. With this, we need to add an argument to the netlink callback in order to track how many entries were already dumped for the last leaf included in a partial netlink dump. A single additional argument is sufficient, even if we traverse logically nested structures (nexthop objects, hash table buckets, bucket chains): it doesn't matter if we stop in the middle of any of those, because they are always traversed the same way. As an example, s_i values in [], s_fa values in (): node (fa) #1 [1] nexthop #1 bucket #1 -> #0 in chain (1) bucket #2 -> #0 in chain (2) -> #1 in chain (3) -> #2 in chain (4) bucket #3 -> #0 in chain (5) -> #1 in chain (6) nexthop #2 bucket #1 -> #0 in chain (7) -> #1 in chain (8) bucket #2 -> #0 in chain (9) -- node (fa) #2 [2] nexthop #1 bucket #1 -> #0 in chain (1) -> #1 in chain (2) bucket #2 -> #0 in chain (3) it doesn't matter if we stop at (3), (4), (7) for "node #1", or at (2) for "node #2": walking flattens all that. It would even be possible to drop the distinction between the in-tree (s_i) and in-node (s_fa) counter, but a further improvement might advise against this. This is only as accurate as the existing tracking mechanism for leaves: if a partial dump is restarted after exceptions are removed or expired, we might skip some non-dumped entries. To improve this, we could attach a 'sernum' attribute (similar to the one used for IPv6) to nexthop entities, and bump this counter whenever exceptions change: having a distinction between the two counters would make this more convenient. Listing of exception routes (modified routes pre-3.5) was tested against these versions of kernel and iproute2: iproute2 kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 3.5-rc4 + + + + + 4.4 4.9 4.14 4.15 4.19 5.0 5.1 fixed + + + + + v7: - Move loop over nexthop objects to route.c, and pass struct fib_info and table ID to it, not a struct fib_alias (suggested by David Ahern) - While at it, note that the NULL check on fa->fa_info is redundant, and the check on RTNH_F_DEAD is also not consistent with what's done with regular route listing: just keep it for nhc_flags - Rename entry point function for dumping exceptions to fib_dump_info_fnhe(), and rearrange arguments for consistency with fib_dump_info() - Rename fnhe_dump_buckets() to fnhe_dump_bucket() and make it handle one bucket at a time - Expand commit message to describe why we can have a single "skip" counter for all exceptions stored in bucket chains in nexthop objects (suggested by David Ahern) v6: - Rebased onto net-next - Loop over nexthop paths too. Move loop over fnhe buckets to route.c, avoids need to export rt_fill_info() and to touch exceptions from fib_trie.c. Pass NULL as flow to rt_fill_info(), it now allows that (suggested by David Ahern) Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21 17:45:23 +02:00
ipv4: fix suspicious RCU usage in fib_dump_info_fnhe() sysbot reported that we lack appropriate rcu_read_lock() protection in fib_dump_info_fnhe() net/ipv4/route.c:2875 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor609/8966: #0: 00000000b7dbe288 (rtnl_mutex){+.+.}, at: netlink_dump+0xe7/0xfb0 net/netlink/af_netlink.c:2199 stack backtrace: CPU: 0 PID: 8966 Comm: syz-executor609 Not tainted 5.2.0-rc5+ #43 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5250 fib_dump_info_fnhe+0x9d9/0x1080 net/ipv4/route.c:2875 fn_trie_dump_leaf net/ipv4/fib_trie.c:2141 [inline] fib_table_dump+0x64a/0xd00 net/ipv4/fib_trie.c:2175 inet_dump_fib+0x83c/0xa90 net/ipv4/fib_frontend.c:1004 rtnl_dump_all+0x295/0x490 net/core/rtnetlink.c:3445 netlink_dump+0x558/0xfb0 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x5b1/0x7d0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:226 [inline] rtnetlink_rcv_msg+0x73d/0xb00 net/core/rtnetlink.c:5182 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5237 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:646 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:665 sock_write_iter+0x27c/0x3e0 net/socket.c:994 call_write_iter include/linux/fs.h:1872 [inline] new_sync_write+0x4d3/0x770 fs/read_write.c:483 __vfs_write+0xe1/0x110 fs/read_write.c:496 vfs_write+0x20c/0x580 fs/read_write.c:558 ksys_write+0x14f/0x290 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:620 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4401b9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc8e134978 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401b9 RDX: 000000000000001c RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000000000010 R11: 0000000000000246 R12: 0000000000401a40 R13: 0000000000401ad0 R14: 0000000000000000 R15: 0000000000000000 Fixes: ee28906fd7a1 ("ipv4: Dump route exceptions if requested") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: David Ahern <dsahern@gmail.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 03:04:50 -07:00
net: route dump netlink NLM_F_MULTI flag missing An excerpt from netlink(7) man page, In multipart messages (multiple nlmsghdr headers with associated payload in one byte stream) the first and all following headers have the NLM_F_MULTI flag set, except for the last header which has the type NLMSG_DONE. but, after (ee28906) there is a missing NLM_F_MULTI flag in the middle of a FIB dump. The result is user space applications following above man page excerpt may get confused and may stop parsing msg believing something went wrong. In the golang netlink lib [0] the library logic stops parsing believing the message is not a multipart message. Found this running Cilium[1] against net-next while adding a feature to auto-detect routes. I noticed with multiple route tables we no longer could detect the default routes on net tree kernels because the library logic was not returning them. Fix this by handling the fib_dump_info_fnhe() case the same way the fib_dump_info() handles it by passing the flags argument through the call chain and adding a flags argument to rt_fill_info(). Tested with Cilium stack and auto-detection of routes works again. Also annotated libs to dump netlink msgs and inspected NLM_F_MULTI and NLMSG_DONE flags look correct after this. Note: In inet_rtm_getroute() pass rt_fill_info() '0' for flags the same as is done for fib_dump_info() so this looks correct to me. [0] https://github.com/vishvananda/netlink/ [1] https://github.com/cilium/ Fixes: ee28906fd7a14 ("ipv4: Dump route exceptions if requested") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23 17:11:38 -07:00
ipv4: fix suspicious RCU usage in fib_dump_info_fnhe() sysbot reported that we lack appropriate rcu_read_lock() protection in fib_dump_info_fnhe() net/ipv4/route.c:2875 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor609/8966: #0: 00000000b7dbe288 (rtnl_mutex){+.+.}, at: netlink_dump+0xe7/0xfb0 net/netlink/af_netlink.c:2199 stack backtrace: CPU: 0 PID: 8966 Comm: syz-executor609 Not tainted 5.2.0-rc5+ #43 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5250 fib_dump_info_fnhe+0x9d9/0x1080 net/ipv4/route.c:2875 fn_trie_dump_leaf net/ipv4/fib_trie.c:2141 [inline] fib_table_dump+0x64a/0xd00 net/ipv4/fib_trie.c:2175 inet_dump_fib+0x83c/0xa90 net/ipv4/fib_frontend.c:1004 rtnl_dump_all+0x295/0x490 net/core/rtnetlink.c:3445 netlink_dump+0x558/0xfb0 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x5b1/0x7d0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:226 [inline] rtnetlink_rcv_msg+0x73d/0xb00 net/core/rtnetlink.c:5182 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5237 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:646 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:665 sock_write_iter+0x27c/0x3e0 net/socket.c:994 call_write_iter include/linux/fs.h:1872 [inline] new_sync_write+0x4d3/0x770 fs/read_write.c:483 __vfs_write+0xe1/0x110 fs/read_write.c:496 vfs_write+0x20c/0x580 fs/read_write.c:558 ksys_write+0x14f/0x290 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:620 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4401b9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc8e134978 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401b9 RDX: 000000000000001c RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000000000010 R11: 0000000000000246 R12: 0000000000401a40 R13: 0000000000401ad0 R14: 0000000000000000 R15: 0000000000000000 Fixes: ee28906fd7a1 ("ipv4: Dump route exceptions if requested") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: David Ahern <dsahern@gmail.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26 03:04:50 -07:00
ipv4: Dump route exceptions if requested Since commit 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions."), cached exception routes are stored as a separate entity, so they are not dumped on a FIB dump, even if the RTM_F_CLONED flag is passed. This implies that the command 'ip route list cache' doesn't return any result anymore. If the RTM_F_CLONED is passed, and strict checking requested, retrieve nexthop exception routes and dump them. If no strict checking is requested, filtering can't be performed consistently: dump everything in that case. With this, we need to add an argument to the netlink callback in order to track how many entries were already dumped for the last leaf included in a partial netlink dump. A single additional argument is sufficient, even if we traverse logically nested structures (nexthop objects, hash table buckets, bucket chains): it doesn't matter if we stop in the middle of any of those, because they are always traversed the same way. As an example, s_i values in [], s_fa values in (): node (fa) #1 [1] nexthop #1 bucket #1 -> #0 in chain (1) bucket #2 -> #0 in chain (2) -> #1 in chain (3) -> #2 in chain (4) bucket #3 -> #0 in chain (5) -> #1 in chain (6) nexthop #2 bucket #1 -> #0 in chain (7) -> #1 in chain (8) bucket #2 -> #0 in chain (9) -- node (fa) #2 [2] nexthop #1 bucket #1 -> #0 in chain (1) -> #1 in chain (2) bucket #2 -> #0 in chain (3) it doesn't matter if we stop at (3), (4), (7) for "node #1", or at (2) for "node #2": walking flattens all that. It would even be possible to drop the distinction between the in-tree (s_i) and in-node (s_fa) counter, but a further improvement might advise against this. This is only as accurate as the existing tracking mechanism for leaves: if a partial dump is restarted after exceptions are removed or expired, we might skip some non-dumped entries. To improve this, we could attach a 'sernum' attribute (similar to the one used for IPv6) to nexthop entities, and bump this counter whenever exceptions change: having a distinction between the two counters would make this more convenient. Listing of exception routes (modified routes pre-3.5) was tested against these versions of kernel and iproute2: iproute2 kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 3.5-rc4 + + + + + 4.4 4.9 4.14 4.15 4.19 5.0 5.1 fixed + + + + + v7: - Move loop over nexthop objects to route.c, and pass struct fib_info and table ID to it, not a struct fib_alias (suggested by David Ahern) - While at it, note that the NULL check on fa->fa_info is redundant, and the check on RTNH_F_DEAD is also not consistent with what's done with regular route listing: just keep it for nhc_flags - Rename entry point function for dumping exceptions to fib_dump_info_fnhe(), and rearrange arguments for consistency with fib_dump_info() - Rename fnhe_dump_buckets() to fnhe_dump_bucket() and make it handle one bucket at a time - Expand commit message to describe why we can have a single "skip" counter for all exceptions stored in bucket chains in nexthop objects (suggested by David Ahern) v6: - Rebased onto net-next - Loop over nexthop paths too. Move loop over fnhe buckets to route.c, avoids need to export rt_fill_info() and to touch exceptions from fib_trie.c. Pass NULL as flow to rt_fill_info(), it now allows that (suggested by David Ahern) Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21 17:45:23 +02:00
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:28 +02:00
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 14:07:28 +02:00
ipv4: Convert ->flowi4_tos to dscp_t. Convert the ->flowic_tos field of struct flowi_common from __u8 to dscp_t, rename it ->flowic_dscp and propagate these changes to struct flowi and struct flowi4. We've had several bugs in the past where ECN bits could interfere with IPv4 routing, because these bits were not properly cleared when setting ->flowi4_tos. These bugs should be fixed now and the dscp_t type has been introduced to ensure that variables carrying DSCP values don't accidentally have any ECN bits set. Several variables and structure fields have been converted to dscp_t already, but the main IPv4 routing structure, struct flowi4, is still using a __u8. To avoid any future regression, this patch converts it to dscp_t. There are many users to convert at once. Fortunately, around half of ->flowi4_tos users already have a dscp_t value at hand, which they currently convert to __u8 using inet_dscp_to_dsfield(). For all of these users, we just need to drop that conversion. But, although we try to do the __u8 <-> dscp_t conversions at the boundaries of the network or of user space, some places still store TOS/DSCP variables as __u8 in core networking code. Those can hardly be converted either because the data structure is part of UAPI or because the same variable or field is also used for handling ECN in other parts of the code. In all of these cases where we don't have a dscp_t variable at hand, we need to use inet_dsfield_to_dscp() when interacting with ->flowi4_dscp. Changes since v1: * Fix space alignment in __bpf_redirect_neigh_v4() (Ido). Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/29acecb45e911d17446b9a3dbdb1ab7b821ea371.1756128932.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-25 15:37:43 +02:00
net: ipv4: Set skb->dev for output route resolution When user requests to resolve an output route, the kernel synthesizes an skb where the relevant parameters (e.g., source address) are set. The skb is then passed to ip_route_output_key_hash_rcu() which might call into the flow dissector in case a multipath route was hit and a nexthop needs to be selected based on the multipath hash. Since both 'skb->dev' and 'skb->sk' are not set, a warning is triggered in the flow dissector [1]. The warning is there to prevent codepaths from silently falling back to the standard flow dissector instead of the BPF one. Therefore, instead of removing the warning, set 'skb->dev' to the loopback device, as its not used for anything but resolving the correct namespace. [1] WARNING: CPU: 1 PID: 24819 at net/core/flow_dissector.c:764 __skb_flow_dissect+0x314/0x16b0 ... RSP: 0018:ffffa0df41fdf650 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8bcded232000 RCX: 0000000000000000 RDX: ffffa0df41fdf7e0 RSI: ffffffff98e415a0 RDI: ffff8bcded232000 RBP: ffffa0df41fdf760 R08: 0000000000000000 R09: 0000000000000000 R10: ffffa0df41fdf7e8 R11: ffff8bcdf27a3000 R12: ffffffff98e415a0 R13: ffffa0df41fdf7e0 R14: ffffffff98dd2980 R15: ffffa0df41fdf7e0 FS: 00007f46f6897680(0000) GS:ffff8bcdf7a80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055933e95f9a0 CR3: 000000021e636000 CR4: 00000000001006e0 Call Trace: fib_multipath_hash+0x28c/0x2d0 ? fib_multipath_hash+0x28c/0x2d0 fib_select_path+0x241/0x32f ? __fib_lookup+0x6a/0xb0 ip_route_output_key_hash_rcu+0x650/0xa30 ? __alloc_skb+0x9b/0x1d0 inet_rtm_getroute+0x3f7/0xb80 ? __alloc_pages_nodemask+0x11c/0x2c0 rtnetlink_rcv_msg+0x1d9/0x2f0 ? rtnl_calcit.isra.24+0x120/0x120 netlink_rcv_skb+0x54/0x130 rtnetlink_rcv+0x15/0x20 netlink_unicast+0x20a/0x2c0 netlink_sendmsg+0x2d1/0x3d0 sock_sendmsg+0x39/0x50 ___sys_sendmsg+0x2a0/0x2f0 ? filemap_map_pages+0x16b/0x360 ? __handle_mm_fault+0x108e/0x13d0 __sys_sendmsg+0x63/0xa0 ? __sys_sendmsg+0x63/0xa0 __x64_sys_sendmsg+0x1f/0x30 do_syscall_64+0x5a/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: d0e13a1488ad ("flow_dissector: lookup netns by skb->sk if skb->dev is NULL") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 17:03:27 +00:00
net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set Syzkaller hit 'general protection fault in fib_dump_info' bug on commit 4.13-rc5.. Guilty file: net/ipv4/fib_semantics.c kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 2808 Comm: syz-executor0 Not tainted 4.13.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff880078562700 task.stack: ffff880078110000 RIP: 0010:fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: 0018:ffff880078117010 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 00000000000000fe RCX: 0000000000000002 RDX: 0000000000000006 RSI: ffff880078117084 RDI: 0000000000000030 RBP: ffff880078117268 R08: 000000000000000c R09: ffff8800780d80c8 R10: 0000000058d629b4 R11: 0000000067fce681 R12: 0000000000000000 R13: ffff8800784bd540 R14: ffff8800780d80b5 R15: ffff8800780d80a4 FS: 00000000022fa940(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004387d0 CR3: 0000000079135000 CR4: 00000000000006f0 Call Trace: inet_rtm_getroute+0xc89/0x1f50 net/ipv4/route.c:2766 rtnetlink_rcv_msg+0x288/0x680 net/core/rtnetlink.c:4217 netlink_rcv_skb+0x340/0x470 net/netlink/af_netlink.c:2397 rtnetlink_rcv+0x28/0x30 net/core/rtnetlink.c:4223 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4c4/0x6e0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0x8c4/0xca0 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x779/0x8d0 net/socket.c:2035 __sys_sendmsg+0xd1/0x170 net/socket.c:2069 SYSC_sendmsg net/socket.c:2080 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2076 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: 0033:0x4512e9 RSP: 002b:00007ffc75584cc8 EFLAGS: 00000216 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00000000004512e9 RDX: 0000000000000000 RSI: 0000000020f2cfc8 RDI: 0000000000000003 RBP: 000000000000000e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: fffffffffffffffe R13: 0000000000718000 R14: 0000000020c44ff0 R15: 0000000000000000 Code: 00 0f b6 8d ec fd ff ff 48 8b 85 f0 fd ff ff 88 48 17 48 8b 45 28 48 8d 78 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e cb 0c 00 00 48 8b 45 28 44 RIP: fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: ffff880078117010 ---[ end trace 254a7af28348f88b ]--- This patch adds a res->fi NULL check. example run: $ip route get 0.0.0.0 iif virt1-0 broadcast 0.0.0.0 dev lo cache <local,brd> iif virt1-0 $ip route get 0.0.0.0 iif virt1-0 fibmatch RTNETLINK answers: No route to host Reported-by: idaifish <idaifish@gmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: b61798130f1b ("net: ipv4: RTM_GETROUTE: return matched fib result when requested") Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16 12:38:52 -07:00
net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set Syzkaller hit 'general protection fault in fib_dump_info' bug on commit 4.13-rc5.. Guilty file: net/ipv4/fib_semantics.c kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 2808 Comm: syz-executor0 Not tainted 4.13.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff880078562700 task.stack: ffff880078110000 RIP: 0010:fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: 0018:ffff880078117010 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 00000000000000fe RCX: 0000000000000002 RDX: 0000000000000006 RSI: ffff880078117084 RDI: 0000000000000030 RBP: ffff880078117268 R08: 000000000000000c R09: ffff8800780d80c8 R10: 0000000058d629b4 R11: 0000000067fce681 R12: 0000000000000000 R13: ffff8800784bd540 R14: ffff8800780d80b5 R15: ffff8800780d80a4 FS: 00000000022fa940(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004387d0 CR3: 0000000079135000 CR4: 00000000000006f0 Call Trace: inet_rtm_getroute+0xc89/0x1f50 net/ipv4/route.c:2766 rtnetlink_rcv_msg+0x288/0x680 net/core/rtnetlink.c:4217 netlink_rcv_skb+0x340/0x470 net/netlink/af_netlink.c:2397 rtnetlink_rcv+0x28/0x30 net/core/rtnetlink.c:4223 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4c4/0x6e0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0x8c4/0xca0 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x779/0x8d0 net/socket.c:2035 __sys_sendmsg+0xd1/0x170 net/socket.c:2069 SYSC_sendmsg net/socket.c:2080 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2076 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: 0033:0x4512e9 RSP: 002b:00007ffc75584cc8 EFLAGS: 00000216 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00000000004512e9 RDX: 0000000000000000 RSI: 0000000020f2cfc8 RDI: 0000000000000003 RBP: 000000000000000e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: fffffffffffffffe R13: 0000000000718000 R14: 0000000020c44ff0 R15: 0000000000000000 Code: 00 0f b6 8d ec fd ff ff 48 8b 85 f0 fd ff ff 88 48 17 48 8b 45 28 48 8d 78 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e cb 0c 00 00 48 8b 45 28 44 RIP: fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: ffff880078117010 ---[ end trace 254a7af28348f88b ]--- This patch adds a res->fi NULL check. example run: $ip route get 0.0.0.0 iif virt1-0 broadcast 0.0.0.0 dev lo cache <local,brd> iif virt1-0 $ip route get 0.0.0.0 iif virt1-0 fibmatch RTNETLINK answers: No route to host Reported-by: idaifish <idaifish@gmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: b61798130f1b ("net: ipv4: RTM_GETROUTE: return matched fib result when requested") Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16 12:38:52 -07:00
net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set Syzkaller hit 'general protection fault in fib_dump_info' bug on commit 4.13-rc5.. Guilty file: net/ipv4/fib_semantics.c kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 2808 Comm: syz-executor0 Not tainted 4.13.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff880078562700 task.stack: ffff880078110000 RIP: 0010:fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: 0018:ffff880078117010 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 00000000000000fe RCX: 0000000000000002 RDX: 0000000000000006 RSI: ffff880078117084 RDI: 0000000000000030 RBP: ffff880078117268 R08: 000000000000000c R09: ffff8800780d80c8 R10: 0000000058d629b4 R11: 0000000067fce681 R12: 0000000000000000 R13: ffff8800784bd540 R14: ffff8800780d80b5 R15: ffff8800780d80a4 FS: 00000000022fa940(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004387d0 CR3: 0000000079135000 CR4: 00000000000006f0 Call Trace: inet_rtm_getroute+0xc89/0x1f50 net/ipv4/route.c:2766 rtnetlink_rcv_msg+0x288/0x680 net/core/rtnetlink.c:4217 netlink_rcv_skb+0x340/0x470 net/netlink/af_netlink.c:2397 rtnetlink_rcv+0x28/0x30 net/core/rtnetlink.c:4223 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4c4/0x6e0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0x8c4/0xca0 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x779/0x8d0 net/socket.c:2035 __sys_sendmsg+0xd1/0x170 net/socket.c:2069 SYSC_sendmsg net/socket.c:2080 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2076 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: 0033:0x4512e9 RSP: 002b:00007ffc75584cc8 EFLAGS: 00000216 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00000000004512e9 RDX: 0000000000000000 RSI: 0000000020f2cfc8 RDI: 0000000000000003 RBP: 000000000000000e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: fffffffffffffffe R13: 0000000000718000 R14: 0000000020c44ff0 R15: 0000000000000000 Code: 00 0f b6 8d ec fd ff ff 48 8b 85 f0 fd ff ff 88 48 17 48 8b 45 28 48 8d 78 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e cb 0c 00 00 48 8b 45 28 44 RIP: fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: ffff880078117010 ---[ end trace 254a7af28348f88b ]--- This patch adds a res->fi NULL check. example run: $ip route get 0.0.0.0 iif virt1-0 broadcast 0.0.0.0 dev lo cache <local,brd> iif virt1-0 $ip route get 0.0.0.0 iif virt1-0 fibmatch RTNETLINK answers: No route to host Reported-by: idaifish <idaifish@gmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: b61798130f1b ("net: ipv4: RTM_GETROUTE: return matched fib result when requested") Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16 12:38:52 -07:00
ipv4: Add "offload" and "trap" indications to routes When performing L3 offload, routes and nexthops are usually programmed into two different tables in the underlying device. Therefore, the fact that a nexthop resides in hardware does not necessarily mean that all the associated routes also reside in hardware and vice-versa. While the kernel can signal to user space the presence of a nexthop in hardware (via 'RTNH_F_OFFLOAD'), it does not have a corresponding flag for routes. In addition, the fact that a route resides in hardware does not necessarily mean that the traffic is offloaded. For example, unreachable routes (i.e., 'RTN_UNREACHABLE') are programmed to trap packets to the CPU so that the kernel will be able to generate the appropriate ICMP error packet. This patch adds an "offload" and "trap" indications to IPv4 routes, so that users will have better visibility into the offload process. 'struct fib_alias' is extended with two new fields that indicate if the route resides in hardware or not and if it is offloading traffic from the kernel or trapping packets to it. Note that the new fields are added in the 6 bytes hole and therefore the struct still fits in a single cache line [1]. Capable drivers are expected to invoke fib_alias_hw_flags_set() with the route's key in order to set the flags. The indications are dumped to user space via a new flags (i.e., 'RTM_F_OFFLOAD' and 'RTM_F_TRAP') in the 'rtm_flags' field in the ancillary header. v2: * Make use of 'struct fib_rt_info' in fib_alias_hw_flags_set() [1] struct fib_alias { struct hlist_node fa_list; /* 0 16 */ struct fib_info * fa_info; /* 16 8 */ u8 fa_tos; /* 24 1 */ u8 fa_type; /* 25 1 */ u8 fa_state; /* 26 1 */ u8 fa_slen; /* 27 1 */ u32 tb_id; /* 28 4 */ s16 fa_default; /* 32 2 */ u8 offload:1; /* 34: 0 1 */ u8 trap:1; /* 34: 1 1 */ u8 unused:6; /* 34: 2 1 */ /* XXX 5 bytes hole, try to pack */ struct callback_head rcu __attribute__((__aligned__(8))); /* 40 16 */ /* size: 56, cachelines: 1, members: 12 */ /* sum members: 50, holes: 1, sum holes: 5 */ /* sum bitfield members: 8 bits (1 bytes) */ /* forced alignments: 1, forced holes: 1, sum forced holes: 5 */ /* last cacheline: 56 bytes */ } __attribute__((__aligned__(8))); Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:11 +02:00
ipv4: Add "offload" and "trap" indications to routes When performing L3 offload, routes and nexthops are usually programmed into two different tables in the underlying device. Therefore, the fact that a nexthop resides in hardware does not necessarily mean that all the associated routes also reside in hardware and vice-versa. While the kernel can signal to user space the presence of a nexthop in hardware (via 'RTNH_F_OFFLOAD'), it does not have a corresponding flag for routes. In addition, the fact that a route resides in hardware does not necessarily mean that the traffic is offloaded. For example, unreachable routes (i.e., 'RTN_UNREACHABLE') are programmed to trap packets to the CPU so that the kernel will be able to generate the appropriate ICMP error packet. This patch adds an "offload" and "trap" indications to IPv4 routes, so that users will have better visibility into the offload process. 'struct fib_alias' is extended with two new fields that indicate if the route resides in hardware or not and if it is offloading traffic from the kernel or trapping packets to it. Note that the new fields are added in the 6 bytes hole and therefore the struct still fits in a single cache line [1]. Capable drivers are expected to invoke fib_alias_hw_flags_set() with the route's key in order to set the flags. The indications are dumped to user space via a new flags (i.e., 'RTM_F_OFFLOAD' and 'RTM_F_TRAP') in the 'rtm_flags' field in the ancillary header. v2: * Make use of 'struct fib_rt_info' in fib_alias_hw_flags_set() [1] struct fib_alias { struct hlist_node fa_list; /* 0 16 */ struct fib_info * fa_info; /* 16 8 */ u8 fa_tos; /* 24 1 */ u8 fa_type; /* 25 1 */ u8 fa_state; /* 26 1 */ u8 fa_slen; /* 27 1 */ u32 tb_id; /* 28 4 */ s16 fa_default; /* 32 2 */ u8 offload:1; /* 34: 0 1 */ u8 trap:1; /* 34: 1 1 */ u8 unused:6; /* 34: 2 1 */ /* XXX 5 bytes hole, try to pack */ struct callback_head rcu __attribute__((__aligned__(8))); /* 40 16 */ /* size: 56, cachelines: 1, members: 12 */ /* sum members: 50, holes: 1, sum holes: 5 */ /* sum bitfield members: 8 bits (1 bytes) */ /* forced alignments: 1, forced holes: 1, sum forced holes: 5 */ /* last cacheline: 56 bytes */ } __attribute__((__aligned__(8))); Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:11 +02:00
ipv4: Add "offload" and "trap" indications to routes When performing L3 offload, routes and nexthops are usually programmed into two different tables in the underlying device. Therefore, the fact that a nexthop resides in hardware does not necessarily mean that all the associated routes also reside in hardware and vice-versa. While the kernel can signal to user space the presence of a nexthop in hardware (via 'RTNH_F_OFFLOAD'), it does not have a corresponding flag for routes. In addition, the fact that a route resides in hardware does not necessarily mean that the traffic is offloaded. For example, unreachable routes (i.e., 'RTN_UNREACHABLE') are programmed to trap packets to the CPU so that the kernel will be able to generate the appropriate ICMP error packet. This patch adds an "offload" and "trap" indications to IPv4 routes, so that users will have better visibility into the offload process. 'struct fib_alias' is extended with two new fields that indicate if the route resides in hardware or not and if it is offloading traffic from the kernel or trapping packets to it. Note that the new fields are added in the 6 bytes hole and therefore the struct still fits in a single cache line [1]. Capable drivers are expected to invoke fib_alias_hw_flags_set() with the route's key in order to set the flags. The indications are dumped to user space via a new flags (i.e., 'RTM_F_OFFLOAD' and 'RTM_F_TRAP') in the 'rtm_flags' field in the ancillary header. v2: * Make use of 'struct fib_rt_info' in fib_alias_hw_flags_set() [1] struct fib_alias { struct hlist_node fa_list; /* 0 16 */ struct fib_info * fa_info; /* 16 8 */ u8 fa_tos; /* 24 1 */ u8 fa_type; /* 25 1 */ u8 fa_state; /* 26 1 */ u8 fa_slen; /* 27 1 */ u32 tb_id; /* 28 4 */ s16 fa_default; /* 32 2 */ u8 offload:1; /* 34: 0 1 */ u8 trap:1; /* 34: 1 1 */ u8 unused:6; /* 34: 2 1 */ /* XXX 5 bytes hole, try to pack */ struct callback_head rcu __attribute__((__aligned__(8))); /* 40 16 */ /* size: 56, cachelines: 1, members: 12 */ /* sum members: 50, holes: 1, sum holes: 5 */ /* sum bitfield members: 8 bits (1 bytes) */ /* forced alignments: 1, forced holes: 1, sum forced holes: 5 */ /* last cacheline: 56 bytes */ } __attribute__((__aligned__(8))); Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:11 +02:00
ipv4: fix data races in fib_alias_hw_flags_set fib_alias_hw_flags_set() can be used by concurrent threads, and is only RCU protected. We need to annotate accesses to following fields of struct fib_alias: offload, trap, offload_failed Because of READ_ONCE()WRITE_ONCE() limitations, make these field u8. BUG: KCSAN: data-race in fib_alias_hw_flags_set / fib_alias_hw_flags_set read to 0xffff888134224a6a of 1 bytes by task 2013 on cpu 1: fib_alias_hw_flags_set+0x28a/0x470 net/ipv4/fib_trie.c:1050 nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline] nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline] nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline] nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline] nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline] nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 process_scheduled_works kernel/workqueue.c:2370 [inline] worker_thread+0x7df/0xa70 kernel/workqueue.c:2456 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 write to 0xffff888134224a6a of 1 bytes by task 4872 on cpu 0: fib_alias_hw_flags_set+0x2d5/0x470 net/ipv4/fib_trie.c:1054 nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline] nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline] nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline] nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline] nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline] nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 process_scheduled_works kernel/workqueue.c:2370 [inline] worker_thread+0x7df/0xa70 kernel/workqueue.c:2456 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 value changed: 0x00 -> 0x02 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 4872 Comm: kworker/0:0 Not tainted 5.17.0-rc3-syzkaller-00188-g1d41d2e82623-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events nsim_fib_event_work Fixes: 90b93f1b31f8 ("ipv4: Add "offload" and "trap" indications to routes") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220216173217.3792411-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-16 09:32:16 -08:00
ipv4: Add "offload" and "trap" indications to routes When performing L3 offload, routes and nexthops are usually programmed into two different tables in the underlying device. Therefore, the fact that a nexthop resides in hardware does not necessarily mean that all the associated routes also reside in hardware and vice-versa. While the kernel can signal to user space the presence of a nexthop in hardware (via 'RTNH_F_OFFLOAD'), it does not have a corresponding flag for routes. In addition, the fact that a route resides in hardware does not necessarily mean that the traffic is offloaded. For example, unreachable routes (i.e., 'RTN_UNREACHABLE') are programmed to trap packets to the CPU so that the kernel will be able to generate the appropriate ICMP error packet. This patch adds an "offload" and "trap" indications to IPv4 routes, so that users will have better visibility into the offload process. 'struct fib_alias' is extended with two new fields that indicate if the route resides in hardware or not and if it is offloading traffic from the kernel or trapping packets to it. Note that the new fields are added in the 6 bytes hole and therefore the struct still fits in a single cache line [1]. Capable drivers are expected to invoke fib_alias_hw_flags_set() with the route's key in order to set the flags. The indications are dumped to user space via a new flags (i.e., 'RTM_F_OFFLOAD' and 'RTM_F_TRAP') in the 'rtm_flags' field in the ancillary header. v2: * Make use of 'struct fib_rt_info' in fib_alias_hw_flags_set() [1] struct fib_alias { struct hlist_node fa_list; /* 0 16 */ struct fib_info * fa_info; /* 16 8 */ u8 fa_tos; /* 24 1 */ u8 fa_type; /* 25 1 */ u8 fa_state; /* 26 1 */ u8 fa_slen; /* 27 1 */ u32 tb_id; /* 28 4 */ s16 fa_default; /* 32 2 */ u8 offload:1; /* 34: 0 1 */ u8 trap:1; /* 34: 1 1 */ u8 unused:6; /* 34: 2 1 */ /* XXX 5 bytes hole, try to pack */ struct callback_head rcu __attribute__((__aligned__(8))); /* 40 16 */ /* size: 56, cachelines: 1, members: 12 */ /* sum members: 50, holes: 1, sum holes: 5 */ /* sum bitfield members: 8 bits (1 bytes) */ /* forced alignments: 1, forced holes: 1, sum forced holes: 5 */ /* last cacheline: 56 bytes */ } __attribute__((__aligned__(8))); Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14 13:23:11 +02:00
net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set Syzkaller hit 'general protection fault in fib_dump_info' bug on commit 4.13-rc5.. Guilty file: net/ipv4/fib_semantics.c kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 2808 Comm: syz-executor0 Not tainted 4.13.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff880078562700 task.stack: ffff880078110000 RIP: 0010:fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: 0018:ffff880078117010 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 00000000000000fe RCX: 0000000000000002 RDX: 0000000000000006 RSI: ffff880078117084 RDI: 0000000000000030 RBP: ffff880078117268 R08: 000000000000000c R09: ffff8800780d80c8 R10: 0000000058d629b4 R11: 0000000067fce681 R12: 0000000000000000 R13: ffff8800784bd540 R14: ffff8800780d80b5 R15: ffff8800780d80a4 FS: 00000000022fa940(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004387d0 CR3: 0000000079135000 CR4: 00000000000006f0 Call Trace: inet_rtm_getroute+0xc89/0x1f50 net/ipv4/route.c:2766 rtnetlink_rcv_msg+0x288/0x680 net/core/rtnetlink.c:4217 netlink_rcv_skb+0x340/0x470 net/netlink/af_netlink.c:2397 rtnetlink_rcv+0x28/0x30 net/core/rtnetlink.c:4223 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4c4/0x6e0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0x8c4/0xca0 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x779/0x8d0 net/socket.c:2035 __sys_sendmsg+0xd1/0x170 net/socket.c:2069 SYSC_sendmsg net/socket.c:2080 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2076 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: 0033:0x4512e9 RSP: 002b:00007ffc75584cc8 EFLAGS: 00000216 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00000000004512e9 RDX: 0000000000000000 RSI: 0000000020f2cfc8 RDI: 0000000000000003 RBP: 000000000000000e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: fffffffffffffffe R13: 0000000000718000 R14: 0000000020c44ff0 R15: 0000000000000000 Code: 00 0f b6 8d ec fd ff ff 48 8b 85 f0 fd ff ff 88 48 17 48 8b 45 28 48 8d 78 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e cb 0c 00 00 48 8b 45 28 44 RIP: fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: ffff880078117010 ---[ end trace 254a7af28348f88b ]--- This patch adds a res->fi NULL check. example run: $ip route get 0.0.0.0 iif virt1-0 broadcast 0.0.0.0 dev lo cache <local,brd> iif virt1-0 $ip route get 0.0.0.0 iif virt1-0 fibmatch RTNETLINK answers: No route to host Reported-by: idaifish <idaifish@gmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: b61798130f1b ("net: ipv4: RTM_GETROUTE: return matched fib result when requested") Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16 12:38:52 -07:00
net: route dump netlink NLM_F_MULTI flag missing An excerpt from netlink(7) man page, In multipart messages (multiple nlmsghdr headers with associated payload in one byte stream) the first and all following headers have the NLM_F_MULTI flag set, except for the last header which has the type NLMSG_DONE. but, after (ee28906) there is a missing NLM_F_MULTI flag in the middle of a FIB dump. The result is user space applications following above man page excerpt may get confused and may stop parsing msg believing something went wrong. In the golang netlink lib [0] the library logic stops parsing believing the message is not a multipart message. Found this running Cilium[1] against net-next while adding a feature to auto-detect routes. I noticed with multiple route tables we no longer could detect the default routes on net tree kernels because the library logic was not returning them. Fix this by handling the fib_dump_info_fnhe() case the same way the fib_dump_info() handles it by passing the flags argument through the call chain and adding a flags argument to rt_fill_info(). Tested with Cilium stack and auto-detection of routes works again. Also annotated libs to dump netlink msgs and inspected NLM_F_MULTI and NLMSG_DONE flags look correct after this. Note: In inet_rtm_getroute() pass rt_fill_info() '0' for flags the same as is done for fib_dump_info() so this looks correct to me. [0] https://github.com/vishvananda/netlink/ [1] https://github.com/cilium/ Fixes: ee28906fd7a14 ("ipv4: Dump route exceptions if requested") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-23 17:11:38 -07:00
net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set Syzkaller hit 'general protection fault in fib_dump_info' bug on commit 4.13-rc5.. Guilty file: net/ipv4/fib_semantics.c kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 2808 Comm: syz-executor0 Not tainted 4.13.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff880078562700 task.stack: ffff880078110000 RIP: 0010:fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: 0018:ffff880078117010 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 00000000000000fe RCX: 0000000000000002 RDX: 0000000000000006 RSI: ffff880078117084 RDI: 0000000000000030 RBP: ffff880078117268 R08: 000000000000000c R09: ffff8800780d80c8 R10: 0000000058d629b4 R11: 0000000067fce681 R12: 0000000000000000 R13: ffff8800784bd540 R14: ffff8800780d80b5 R15: ffff8800780d80a4 FS: 00000000022fa940(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004387d0 CR3: 0000000079135000 CR4: 00000000000006f0 Call Trace: inet_rtm_getroute+0xc89/0x1f50 net/ipv4/route.c:2766 rtnetlink_rcv_msg+0x288/0x680 net/core/rtnetlink.c:4217 netlink_rcv_skb+0x340/0x470 net/netlink/af_netlink.c:2397 rtnetlink_rcv+0x28/0x30 net/core/rtnetlink.c:4223 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4c4/0x6e0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0x8c4/0xca0 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x779/0x8d0 net/socket.c:2035 __sys_sendmsg+0xd1/0x170 net/socket.c:2069 SYSC_sendmsg net/socket.c:2080 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2076 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: 0033:0x4512e9 RSP: 002b:00007ffc75584cc8 EFLAGS: 00000216 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00000000004512e9 RDX: 0000000000000000 RSI: 0000000020f2cfc8 RDI: 0000000000000003 RBP: 000000000000000e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: fffffffffffffffe R13: 0000000000718000 R14: 0000000020c44ff0 R15: 0000000000000000 Code: 00 0f b6 8d ec fd ff ff 48 8b 85 f0 fd ff ff 88 48 17 48 8b 45 28 48 8d 78 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e cb 0c 00 00 48 8b 45 28 44 RIP: fib_dump_info+0x388/0x1170 net/ipv4/fib_semantics.c:1314 RSP: ffff880078117010 ---[ end trace 254a7af28348f88b ]--- This patch adds a res->fi NULL check. example run: $ip route get 0.0.0.0 iif virt1-0 broadcast 0.0.0.0 dev lo cache <local,brd> iif virt1-0 $ip route get 0.0.0.0 iif virt1-0 fibmatch RTNETLINK answers: No route to host Reported-by: idaifish <idaifish@gmail.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: b61798130f1b ("net: ipv4: RTM_GETROUTE: return matched fib result when requested") Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16 12:38:52 -07:00
sysctl: treewide: constify the ctl_table argument of proc_handlers const qualify the struct ctl_table argument in the proc_handler function signatures. This is a prerequisite to moving the static ctl_table structs into .rodata data which will ensure that proc_handler function pointers cannot be modified. This patch has been generated by the following coccinelle script: ``` virtual patch @r1@ identifier ctl, write, buffer, lenp, ppos; identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)"; @@ int func( - struct ctl_table *ctl + const struct ctl_table *ctl ,int write, void *buffer, size_t *lenp, loff_t *ppos); @r2@ identifier func, ctl, write, buffer, lenp, ppos; @@ int func( - struct ctl_table *ctl + const struct ctl_table *ctl ,int write, void *buffer, size_t *lenp, loff_t *ppos) { ... } @r3@ identifier func; @@ int func( - struct ctl_table * + const struct ctl_table * ,int , void *, size_t *, loff_t *); @r4@ identifier func, ctl; @@ int func( - struct ctl_table *ctl + const struct ctl_table *ctl ,int , void *, size_t *, loff_t *); @r5@ identifier func, write, buffer, lenp, ppos; @@ int func( - struct ctl_table * + const struct ctl_table * ,int write, void *buffer, size_t *lenp, loff_t *ppos); ``` * Code formatting was adjusted in xfs_sysctl.c to comply with code conventions. The xfs_stats_clear_proc_handler, xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where adjusted. * The ctl_table argument in proc_watchdog_common was const qualified. This is called from a proc_handler itself and is calling back into another proc_handler, making it necessary to change it as part of the proc_handler migration. Co-developed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Co-developed-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Joel Granados <j.granados@samsung.com>
2024-07-24 20:59:29 +02:00
net: ipv{6,4}: Remove the now superfluous sentinel elements from ctl_table array This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) * Remove sentinel element from ctl_table structs. * Remove the zeroing out of an array element (to make it look like a sentinel) in sysctl_route_net_init And ipv6_route_sysctl_init. This is not longer needed and is safe after commit c899710fe7f9 ("networking: Update to register_net_sysctl_sz") added the array size to the ctl_table registration. * Remove extra sentinel element in the declaration of devinet_vars. * Removed the "-1" in __devinet_sysctl_register, sysctl_route_net_init, ipv6_sysctl_net_init and ipv4_sysctl_init_net that adjusted for having an extra empty element when looping over ctl_table arrays * Replace the for loop stop condition in __addrconf_sysctl_register that tests for procname == NULL with one that depends on array size * Removing the unprivileged user check in ipv6_route_sysctl_init is safe as it is replaced by calling ipv6_route_sysctl_table_size; introduced in commit c899710fe7f9 ("networking: Update to register_net_sysctl_sz") * Use a table_size variable to keep the value of ARRAY_SIZE Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-01 11:29:26 +02:00
net: ipv{6,4}: Remove the now superfluous sentinel elements from ctl_table array This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) * Remove sentinel element from ctl_table structs. * Remove the zeroing out of an array element (to make it look like a sentinel) in sysctl_route_net_init And ipv6_route_sysctl_init. This is not longer needed and is safe after commit c899710fe7f9 ("networking: Update to register_net_sysctl_sz") added the array size to the ctl_table registration. * Remove extra sentinel element in the declaration of devinet_vars. * Removed the "-1" in __devinet_sysctl_register, sysctl_route_net_init, ipv6_sysctl_net_init and ipv4_sysctl_init_net that adjusted for having an extra empty element when looping over ctl_table arrays * Replace the for loop stop condition in __addrconf_sysctl_register that tests for procname == NULL with one that depends on array size * Removing the unprivileged user check in ipv6_route_sysctl_init is safe as it is replaced by calling ipv6_route_sysctl_table_size; introduced in commit c899710fe7f9 ("networking: Update to register_net_sysctl_sz") * Use a table_size variable to keep the value of ARRAY_SIZE Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-01 11:29:26 +02:00