linux/tools/perf/tests/shell/record_offcpu.sh

174 lines
4.4 KiB

perf test: Add direct off-cpu tests Since we added --off-cpu-thresh, add tests for when a sample's off-cpu time is above the threshold, and when it's below the threshold. Note that the basic test performed in test_offcpu_basic() collects a direct sample now, since sleep 1 has duration of 1000ms, higher than the default value of --off-cpu-thresh of 500ms, resulting in a direct sample. An example: $ sudo perf test offcpu 124: perf record offcpu profiling tests : Ok $ Committer testing: root@number:~# perf test offcpu 126: perf record offcpu profiling tests : Ok root@number:~# perf test -v offcpu 126: perf record offcpu profiling tests : Ok root@number:~# perf test -vv offcpu 126: perf record offcpu profiling tests: --- start --- test child forked, pid 1410791 Checking off-cpu privilege Basic off-cpu test Basic off-cpu test [Success] Child task off-cpu test Child task off-cpu test [Success] Threshold test (above threshold) Threshold test (above threshold) [Success] Threshold test (below threshold) Threshold test (below threshold) [Success] ---- end(0) ---- 126: perf record offcpu profiling tests : Ok root@number:~# Suggested-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Tested-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250501022809.449767-11-howardchu95@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-04-30 19:28:08 -07:00
perf tests record_offcpu: Fix shellcheck warnings about word splitting/quoting and signal names case Running shellcheck on record_offcpu.sh throws below warning: In tests/shell/record_offcpu.sh line 13: trap - exit term int ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. In tests/shell/record_offcpu.sh line 20: trap trap_cleanup exit term int ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. In tests/shell/record_offcpu.sh line 25: if [ `id -u` != 0 ] ^-----^ SC2046 (warning): Quote this to prevent word splitting. Fixed the warnings by: - Capitalize signals(INT, TERM, EXIT) to avoid mixed/lower case naming of signals. - Adding quotes to avoid word splitting. Result from shellcheck after patch changes: $ shellcheck -S warning record_offcpu.sh $ Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230709182800.53002-4-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-07-09 23:57:37 +05:30
perf tests record_offcpu: Fix shellcheck warnings about word splitting/quoting and signal names case Running shellcheck on record_offcpu.sh throws below warning: In tests/shell/record_offcpu.sh line 13: trap - exit term int ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. In tests/shell/record_offcpu.sh line 20: trap trap_cleanup exit term int ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. In tests/shell/record_offcpu.sh line 25: if [ `id -u` != 0 ] ^-----^ SC2046 (warning): Quote this to prevent word splitting. Fixed the warnings by: - Capitalize signals(INT, TERM, EXIT) to avoid mixed/lower case naming of signals. - Adding quotes to avoid word splitting. Result from shellcheck after patch changes: $ shellcheck -S warning record_offcpu.sh $ Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230709182800.53002-4-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-07-09 23:57:37 +05:30
perf test: Add direct off-cpu tests Since we added --off-cpu-thresh, add tests for when a sample's off-cpu time is above the threshold, and when it's below the threshold. Note that the basic test performed in test_offcpu_basic() collects a direct sample now, since sleep 1 has duration of 1000ms, higher than the default value of --off-cpu-thresh of 500ms, resulting in a direct sample. An example: $ sudo perf test offcpu 124: perf record offcpu profiling tests : Ok $ Committer testing: root@number:~# perf test offcpu 126: perf record offcpu profiling tests : Ok root@number:~# perf test -v offcpu 126: perf record offcpu profiling tests : Ok root@number:~# perf test -vv offcpu 126: perf record offcpu profiling tests: --- start --- test child forked, pid 1410791 Checking off-cpu privilege Basic off-cpu test Basic off-cpu test [Success] Child task off-cpu test Child task off-cpu test [Success] Threshold test (above threshold) Threshold test (above threshold) [Success] Threshold test (below threshold) Threshold test (below threshold) [Success] ---- end(0) ---- 126: perf record offcpu profiling tests : Ok root@number:~# Suggested-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Tested-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250501022809.449767-11-howardchu95@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-04-30 19:28:08 -07:00
perf tests record_offcpu: Fix shellcheck warnings about word splitting/quoting and signal names case Running shellcheck on record_offcpu.sh throws below warning: In tests/shell/record_offcpu.sh line 13: trap - exit term int ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. In tests/shell/record_offcpu.sh line 20: trap trap_cleanup exit term int ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. ^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined. In tests/shell/record_offcpu.sh line 25: if [ `id -u` != 0 ] ^-----^ SC2046 (warning): Quote this to prevent word splitting. Fixed the warnings by: - Capitalize signals(INT, TERM, EXIT) to avoid mixed/lower case naming of signals. - Adding quotes to avoid word splitting. Result from shellcheck after patch changes: $ shellcheck -S warning record_offcpu.sh $ Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230709182800.53002-4-atrajeev@linux.vnet.ibm.com Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-07-09 23:57:37 +05:30
perf tests offcpu: Adjust test case perf record offcpu profiling tests for s390 On s390 using linux-next the test case: 87: perf record offcpu profiling tests fails. The root cause is this command # ./perf record --off-cpu -e dummy -- ./perf bench sched messaging -l 10 # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.231 [sec] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.077 MB perf.data (401 samples) ] # It does not generate 800+ sample entries, on s390 usually around 40[1-9], sometimes a few more, but never more than 450. The higher the number of CPUs the lower the number of samples. Looking at function chain: bench_sched_messaging() +--> group() the senders and receiver threads are created. The senders and receivers call function ready() which writes one bytes and wait for a reply using poll system() call. As context switches are counted, the function ready() will trigger a context switch when no input data is available after the write system call. The write system call does not trigger context switches when the data size is small. And writing 1000 bytes (10 iterations with 100 bytes) is not much and certainly won't block. The 400+ context switch on s390 occur when the some receiver/sender threads call ready() and wait for the response from function bench_sched_messaging() being kicked off. Lower the number of expected context switches to 400 to succeed on s390. Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20231106091627.2022530-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-06 10:16:27 +01:00
perf tests offcpu: Adjust test case perf record offcpu profiling tests for s390 On s390 using linux-next the test case: 87: perf record offcpu profiling tests fails. The root cause is this command # ./perf record --off-cpu -e dummy -- ./perf bench sched messaging -l 10 # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.231 [sec] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.077 MB perf.data (401 samples) ] # It does not generate 800+ sample entries, on s390 usually around 40[1-9], sometimes a few more, but never more than 450. The higher the number of CPUs the lower the number of samples. Looking at function chain: bench_sched_messaging() +--> group() the senders and receiver threads are created. The senders and receivers call function ready() which writes one bytes and wait for a reply using poll system() call. As context switches are counted, the function ready() will trigger a context switch when no input data is available after the write system call. The write system call does not trigger context switches when the data size is small. And writing 1000 bytes (10 iterations with 100 bytes) is not much and certainly won't block. The 400+ context switch on s390 occur when the some receiver/sender threads call ready() and wait for the response from function bench_sched_messaging() being kicked off. Lower the number of expected context switches to 400 to succeed on s390. Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20231106091627.2022530-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-11-06 10:16:27 +01:00
perf test: Add direct off-cpu tests Since we added --off-cpu-thresh, add tests for when a sample's off-cpu time is above the threshold, and when it's below the threshold. Note that the basic test performed in test_offcpu_basic() collects a direct sample now, since sleep 1 has duration of 1000ms, higher than the default value of --off-cpu-thresh of 500ms, resulting in a direct sample. An example: $ sudo perf test offcpu 124: perf record offcpu profiling tests : Ok $ Committer testing: root@number:~# perf test offcpu 126: perf record offcpu profiling tests : Ok root@number:~# perf test -v offcpu 126: perf record offcpu profiling tests : Ok root@number:~# perf test -vv offcpu 126: perf record offcpu profiling tests: --- start --- test child forked, pid 1410791 Checking off-cpu privilege Basic off-cpu test Basic off-cpu test [Success] Child task off-cpu test Child task off-cpu test [Success] Threshold test (above threshold) Threshold test (above threshold) [Success] Threshold test (below threshold) Threshold test (below threshold) [Success] ---- end(0) ---- 126: perf record offcpu profiling tests : Ok root@number:~# Suggested-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Tested-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250501022809.449767-11-howardchu95@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-04-30 19:28:08 -07:00
perf test: Add direct off-cpu tests Since we added --off-cpu-thresh, add tests for when a sample's off-cpu time is above the threshold, and when it's below the threshold. Note that the basic test performed in test_offcpu_basic() collects a direct sample now, since sleep 1 has duration of 1000ms, higher than the default value of --off-cpu-thresh of 500ms, resulting in a direct sample. An example: $ sudo perf test offcpu 124: perf record offcpu profiling tests : Ok $ Committer testing: root@number:~# perf test offcpu 126: perf record offcpu profiling tests : Ok root@number:~# perf test -v offcpu 126: perf record offcpu profiling tests : Ok root@number:~# perf test -vv offcpu 126: perf record offcpu profiling tests: --- start --- test child forked, pid 1410791 Checking off-cpu privilege Basic off-cpu test Basic off-cpu test [Success] Child task off-cpu test Child task off-cpu test [Success] Threshold test (above threshold) Threshold test (above threshold) [Success] Threshold test (below threshold) Threshold test (below threshold) [Success] ---- end(0) ---- 126: perf record offcpu profiling tests : Ok root@number:~# Suggested-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Tested-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250501022809.449767-11-howardchu95@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2025-04-30 19:28:08 -07:00