linux/tools/testing/selftests/resctrl/resctrlfs.c

1001 lines
22 KiB

selftests/resctrl: Rewrite Cache Allocation Technology (CAT) test CAT test spawns two processes into two different control groups with exclusive schemata. Both the processes alloc a buffer from memory matching their allocated LLC block size and flush the entire buffer out of caches. Since the processes are reading through the buffer only once during the measurement and initially all the buffer was flushed, the test isn't testing CAT. Rewrite the CAT test to allocate a buffer sized to half of LLC. Then perform a sequence of tests with different LLC alloc sizes starting from half of the CBM bits down to 1-bit CBM. Flush the buffer before each test and read the buffer twice. Observe the LLC misses on the second read through the buffer. As the allocated LLC block gets smaller and smaller, the LLC misses will become larger and larger giving a strong signal on CAT working properly. The new CAT test is using only a single process because it relies on measured effect against another run of itself rather than another process adding noise. The rest of the system is set to use the CBM bits not used by the CAT test to keep the test isolated. Replace count_bits() with count_contiguous_bits() to get the first bit position in order to be able to calculate masks based on it. This change has been tested with a number of systems from different generations. Suggested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-15 17:05:08 +02:00
selftests/resctrl: Use resctrl/info for feature detection Resctrl test suite before running any unit test (like cmt, cat, mbm and mba) should first check if the feature is enabled (by kernel and not just supported by H/W) on the platform or not. validate_resctrl_feature_request() is supposed to do that. This function intends to grep for relevant flags in /proc/cpuinfo but there are several issues here 1. validate_resctrl_feature_request() calls fgrep() to get flags from /proc/cpuinfo. But, fgrep() can only return a string with maximum of 255 characters and hence the complete cpu flags are never returned. 2. The substring search logic is also busted. If strstr() finds requested resctrl feature in the cpu flags, it returns pointer to the first occurrence. But, the logic negates the return value of strstr() and hence validate_resctrl_feature_request() returns false if the feature is present in the cpu flags and returns true if the feature is not present. 3. validate_resctrl_feature_request() checks if a resctrl feature is reported in /proc/cpuinfo flags or not. Having a cpu flag means that the H/W supports the feature, but it doesn't mean that the kernel enabled it. A user could selectively enable only a subset of resctrl features using kernel command line arguments. Hence, /proc/cpuinfo isn't a reliable source to check if a feature is enabled or not. The 3rd issue being the major one and fixing it requires changing the way validate_resctrl_feature_request() works. Since, /proc/cpuinfo isn't the right place to check if a resctrl feature is enabled or not, a more appropriate place is /sys/fs/resctrl/info directory. Change validate_resctrl_feature_request() such that, 1. For cat, check if /sys/fs/resctrl/info/L3 directory is present or not 2. For mba, check if /sys/fs/resctrl/info/MB directory is present or not 3. For cmt, check if /sys/fs/resctrl/info/L3_MON directory is present and check if /sys/fs/resctrl/info/L3_MON/mon_features has llc_occupancy 4. For mbm, check if /sys/fs/resctrl/info/L3_MON directory is present and check if /sys/fs/resctrl/info/L3_MON/mon_features has mbm_<total/local>_bytes Please note that only L3_CAT, L3_CMT, MBA and MBM are supported. CDP and L2 variants can be added later. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-03-17 02:22:47 +00:00
selftests/resctrl: Use resctrl/info for feature detection Resctrl test suite before running any unit test (like cmt, cat, mbm and mba) should first check if the feature is enabled (by kernel and not just supported by H/W) on the platform or not. validate_resctrl_feature_request() is supposed to do that. This function intends to grep for relevant flags in /proc/cpuinfo but there are several issues here 1. validate_resctrl_feature_request() calls fgrep() to get flags from /proc/cpuinfo. But, fgrep() can only return a string with maximum of 255 characters and hence the complete cpu flags are never returned. 2. The substring search logic is also busted. If strstr() finds requested resctrl feature in the cpu flags, it returns pointer to the first occurrence. But, the logic negates the return value of strstr() and hence validate_resctrl_feature_request() returns false if the feature is present in the cpu flags and returns true if the feature is not present. 3. validate_resctrl_feature_request() checks if a resctrl feature is reported in /proc/cpuinfo flags or not. Having a cpu flag means that the H/W supports the feature, but it doesn't mean that the kernel enabled it. A user could selectively enable only a subset of resctrl features using kernel command line arguments. Hence, /proc/cpuinfo isn't a reliable source to check if a feature is enabled or not. The 3rd issue being the major one and fixing it requires changing the way validate_resctrl_feature_request() works. Since, /proc/cpuinfo isn't the right place to check if a resctrl feature is enabled or not, a more appropriate place is /sys/fs/resctrl/info directory. Change validate_resctrl_feature_request() such that, 1. For cat, check if /sys/fs/resctrl/info/L3 directory is present or not 2. For mba, check if /sys/fs/resctrl/info/MB directory is present or not 3. For cmt, check if /sys/fs/resctrl/info/L3_MON directory is present and check if /sys/fs/resctrl/info/L3_MON/mon_features has llc_occupancy 4. For mbm, check if /sys/fs/resctrl/info/L3_MON directory is present and check if /sys/fs/resctrl/info/L3_MON/mon_features has mbm_<total/local>_bytes Please note that only L3_CAT, L3_CMT, MBA and MBM are supported. CDP and L2 variants can be added later. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-03-17 02:22:47 +00:00
selftests/resctrl: Use resctrl/info for feature detection Resctrl test suite before running any unit test (like cmt, cat, mbm and mba) should first check if the feature is enabled (by kernel and not just supported by H/W) on the platform or not. validate_resctrl_feature_request() is supposed to do that. This function intends to grep for relevant flags in /proc/cpuinfo but there are several issues here 1. validate_resctrl_feature_request() calls fgrep() to get flags from /proc/cpuinfo. But, fgrep() can only return a string with maximum of 255 characters and hence the complete cpu flags are never returned. 2. The substring search logic is also busted. If strstr() finds requested resctrl feature in the cpu flags, it returns pointer to the first occurrence. But, the logic negates the return value of strstr() and hence validate_resctrl_feature_request() returns false if the feature is present in the cpu flags and returns true if the feature is not present. 3. validate_resctrl_feature_request() checks if a resctrl feature is reported in /proc/cpuinfo flags or not. Having a cpu flag means that the H/W supports the feature, but it doesn't mean that the kernel enabled it. A user could selectively enable only a subset of resctrl features using kernel command line arguments. Hence, /proc/cpuinfo isn't a reliable source to check if a feature is enabled or not. The 3rd issue being the major one and fixing it requires changing the way validate_resctrl_feature_request() works. Since, /proc/cpuinfo isn't the right place to check if a resctrl feature is enabled or not, a more appropriate place is /sys/fs/resctrl/info directory. Change validate_resctrl_feature_request() such that, 1. For cat, check if /sys/fs/resctrl/info/L3 directory is present or not 2. For mba, check if /sys/fs/resctrl/info/MB directory is present or not 3. For cmt, check if /sys/fs/resctrl/info/L3_MON directory is present and check if /sys/fs/resctrl/info/L3_MON/mon_features has llc_occupancy 4. For mbm, check if /sys/fs/resctrl/info/L3_MON directory is present and check if /sys/fs/resctrl/info/L3_MON/mon_features has mbm_<total/local>_bytes Please note that only L3_CAT, L3_CMT, MBA and MBM are supported. CDP and L2 variants can be added later. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-03-17 02:22:47 +00:00