linux/arch/powerpc/Makefile

456 lines
15 KiB

powerpc: Don't add -mabi= flags when building with Clang When building pseries_defconfig, building vdso32 errors out: error: unknown target ABI 'elfv1' This happens because -m32 in clang changes the target to 32-bit, which does not allow the ABI to be changed. Commit 4dc831aa8813 ("powerpc: Fix compiling a BE kernel with a powerpc64le toolchain") added these flags to fix building big endian kernels with a little endian GCC. Clang doesn't need -mabi because the target triple controls the default value. -mlittle-endian and -mbig-endian manipulate the triple into either powerpc64-* or powerpc64le-*, which properly sets the default ABI. Adding a debug print out in the PPC64TargetInfo constructor after line 383 above shows this: $ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 $ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 Don't specify -mabi when building with clang to avoid the build error with -m32 and not change any code generation. -mcall-aixdesc is not an implemented flag in clang so it can be safely excluded as well, see commit 238abecde8ad ("powerpc: Don't use gcc specific options on clang"). pseries_defconfig successfully builds after this patch and powernv_defconfig and ppc44x_defconfig don't regress. Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> [mpe: Trim clang links in change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191119045712.39633-2-natechancellor@gmail.com
2019-11-18 21:57:10 -07:00
powerpc: Don't add -mabi= flags when building with Clang When building pseries_defconfig, building vdso32 errors out: error: unknown target ABI 'elfv1' This happens because -m32 in clang changes the target to 32-bit, which does not allow the ABI to be changed. Commit 4dc831aa8813 ("powerpc: Fix compiling a BE kernel with a powerpc64le toolchain") added these flags to fix building big endian kernels with a little endian GCC. Clang doesn't need -mabi because the target triple controls the default value. -mlittle-endian and -mbig-endian manipulate the triple into either powerpc64-* or powerpc64le-*, which properly sets the default ABI. Adding a debug print out in the PPC64TargetInfo constructor after line 383 above shows this: $ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 $ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 Don't specify -mabi when building with clang to avoid the build error with -m32 and not change any code generation. -mcall-aixdesc is not an implemented flag in clang so it can be safely excluded as well, see commit 238abecde8ad ("powerpc: Don't use gcc specific options on clang"). pseries_defconfig successfully builds after this patch and powernv_defconfig and ppc44x_defconfig don't regress. Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> [mpe: Trim clang links in change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191119045712.39633-2-natechancellor@gmail.com
2019-11-18 21:57:10 -07:00
powerpc/32: add stack protector support This functionality was tentatively added in the past (commit 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support")) but had to be reverted (commit f2574030b0e3 ("powerpc: Revert the initial stack protector support") because of GCC implementing it differently whether it had been built with libc support or not. Now, GCC offers the possibility to manually set the stack-protector mode (global or tls) regardless of libc support. This time, the patch selects HAVE_STACKPROTECTOR only if -mstack-protector-guard=tls is supported by GCC. On PPC32, as register r2 points to current task_struct at all time, the stack_canary located inside task_struct can be used directly by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary)) The protector is disabled for prom_init and bootx_init as it is too early to handle it properly. $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT [ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64 [ 134.943666] [ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835 [ 134.963380] Call Trace: [ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable) [ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260 [ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64 [ 134.982769] [c6615e00] [ffffffff] 0xffffffff Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-27 07:05:53 +00:00
powerpc/32: add stack protector support This functionality was tentatively added in the past (commit 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support")) but had to be reverted (commit f2574030b0e3 ("powerpc: Revert the initial stack protector support") because of GCC implementing it differently whether it had been built with libc support or not. Now, GCC offers the possibility to manually set the stack-protector mode (global or tls) regardless of libc support. This time, the patch selects HAVE_STACKPROTECTOR only if -mstack-protector-guard=tls is supported by GCC. On PPC32, as register r2 points to current task_struct at all time, the stack_canary located inside task_struct can be used directly by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary)) The protector is disabled for prom_init and bootx_init as it is too early to handle it properly. $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT [ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64 [ 134.943666] [ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835 [ 134.963380] Call Trace: [ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable) [ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260 [ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64 [ 134.982769] [c6615e00] [ffffffff] 0xffffffff Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-27 07:05:53 +00:00
powerpc/32: add stack protector support This functionality was tentatively added in the past (commit 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support")) but had to be reverted (commit f2574030b0e3 ("powerpc: Revert the initial stack protector support") because of GCC implementing it differently whether it had been built with libc support or not. Now, GCC offers the possibility to manually set the stack-protector mode (global or tls) regardless of libc support. This time, the patch selects HAVE_STACKPROTECTOR only if -mstack-protector-guard=tls is supported by GCC. On PPC32, as register r2 points to current task_struct at all time, the stack_canary located inside task_struct can be used directly by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary)) The protector is disabled for prom_init and bootx_init as it is too early to handle it properly. $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT [ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64 [ 134.943666] [ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835 [ 134.963380] Call Trace: [ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable) [ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260 [ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64 [ 134.982769] [c6615e00] [ffffffff] 0xffffffff Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-27 07:05:53 +00:00
powerpc: Don't add -mabi= flags when building with Clang When building pseries_defconfig, building vdso32 errors out: error: unknown target ABI 'elfv1' This happens because -m32 in clang changes the target to 32-bit, which does not allow the ABI to be changed. Commit 4dc831aa8813 ("powerpc: Fix compiling a BE kernel with a powerpc64le toolchain") added these flags to fix building big endian kernels with a little endian GCC. Clang doesn't need -mabi because the target triple controls the default value. -mlittle-endian and -mbig-endian manipulate the triple into either powerpc64-* or powerpc64le-*, which properly sets the default ABI. Adding a debug print out in the PPC64TargetInfo constructor after line 383 above shows this: $ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 $ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 Don't specify -mabi when building with clang to avoid the build error with -m32 and not change any code generation. -mcall-aixdesc is not an implemented flag in clang so it can be safely excluded as well, see commit 238abecde8ad ("powerpc: Don't use gcc specific options on clang"). pseries_defconfig successfully builds after this patch and powernv_defconfig and ppc44x_defconfig don't regress. Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> [mpe: Trim clang links in change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191119045712.39633-2-natechancellor@gmail.com
2019-11-18 21:57:10 -07:00
powerpc: Don't add -mabi= flags when building with Clang When building pseries_defconfig, building vdso32 errors out: error: unknown target ABI 'elfv1' This happens because -m32 in clang changes the target to 32-bit, which does not allow the ABI to be changed. Commit 4dc831aa8813 ("powerpc: Fix compiling a BE kernel with a powerpc64le toolchain") added these flags to fix building big endian kernels with a little endian GCC. Clang doesn't need -mabi because the target triple controls the default value. -mlittle-endian and -mbig-endian manipulate the triple into either powerpc64-* or powerpc64le-*, which properly sets the default ABI. Adding a debug print out in the PPC64TargetInfo constructor after line 383 above shows this: $ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 $ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 Don't specify -mabi when building with clang to avoid the build error with -m32 and not change any code generation. -mcall-aixdesc is not an implemented flag in clang so it can be safely excluded as well, see commit 238abecde8ad ("powerpc: Don't use gcc specific options on clang"). pseries_defconfig successfully builds after this patch and powernv_defconfig and ppc44x_defconfig don't regress. Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> [mpe: Trim clang links in change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191119045712.39633-2-natechancellor@gmail.com
2019-11-18 21:57:10 -07:00
powerpc/32: Avoid unsupported flags with clang When building for ppc32 with clang these flags are unsupported: -ffixed-r2 and -mmultiple llvm's lib/Target/PowerPC/PPCRegisterInfo.cpp marks r2 as reserved on when building for SVR4ABI and !ppc64: // The SVR4 ABI reserves r2 and r13 if (Subtarget.isSVR4ABI()) { // We only reserve r2 if we need to use the TOC pointer. If we have no // explicit uses of the TOC pointer (meaning we're a leaf function with // no constant-pool loads, etc.) and we have no potential uses inside an // inline asm block, then we can treat r2 has an ordinary callee-saved // register. const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>(); if (!TM.isPPC64() || FuncInfo->usesTOCBasePtr() || MF.hasInlineAsm()) markSuperRegs(Reserved, PPC::R2); // System-reserved register markSuperRegs(Reserved, PPC::R13); // Small Data Area pointer register } This means we can safely omit -ffixed-r2 when building for 32-bit targets. The -mmultiple/-mno-multiple flags are not supported by clang, so platforms that might support multiple miss out on using multiple word instructions. We wrap these flags in cc-option so that when Clang gains support the kernel will be able use these flags. Clang 8 can then build a ppc44x_defconfig which boots in Qemu: make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- ppc44x_defconfig ./scripts/config -e CONFIG_DEVTMPFS -d DEVTMPFS_MOUNT make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- qemu-system-ppc -M bamboo \ -kernel arch/powerpc/boot/zImage \ -dtb arch/powerpc/boot/dts/bamboo.dtb \ -initrd ~/ppc32-440-rootfs.cpio \ -nographic -serial stdio -monitor pty -append "console=ttyS0" Link: https://github.com/ClangBuiltLinux/linux/issues/261 Link: https://bugs.llvm.org/show_bug.cgi?id=39556 Link: https://bugs.llvm.org/show_bug.cgi?id=39555 Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-12 15:58:06 +10:30
powerpc: Fix 64 bit builds with binutils 2.24 With binutils 2.24, various 64 bit builds fail with relocation errors such as arch/powerpc/kernel/built-in.o: In function `exc_debug_crit_book3e': (.text+0x165ee): relocation truncated to fit: R_PPC64_ADDR16_HI against symbol `interrupt_base_book3e' defined in .text section in arch/powerpc/kernel/built-in.o arch/powerpc/kernel/built-in.o: In function `exc_debug_crit_book3e': (.text+0x16602): relocation truncated to fit: R_PPC64_ADDR16_HI against symbol `interrupt_end_book3e' defined in .text section in arch/powerpc/kernel/built-in.o The assembler maintainer says: I changed the ABI, something that had to be done but unfortunately happens to break the booke kernel code. When building up a 64-bit value with lis, ori, shl, oris, ori or similar sequences, you now should use @high and @higha in place of @h and @ha. @h and @ha (and their associated relocs R_PPC64_ADDR16_HI and R_PPC64_ADDR16_HA) now report overflow if the value is out of 32-bit signed range. ie. @h and @ha assume you're building a 32-bit value. This is needed to report out-of-range -mcmodel=medium toc pointer offsets in @toc@h and @toc@ha expressions, and for consistency I did the same for all other @h and @ha relocs. Replacing @h with @high in one strategic location fixes the relocation errors. This has to be done conditionally since the assembler either supports @h or @high but not both. Cc: <stable@vger.kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-15 09:33:42 -07:00
powerpc/Makefile: Fix PPC_BOOK3S_64 ASFLAGS Ever since commit 15a3204d24a3 ("powerpc/64s: Set assembler machine type to POWER4") we force -mpower4 to be passed to the assembler irrespective of the CFLAGS used (for Book3s 64). When building a powerpc64 kernel with clang, clang will not add -many to the assembler flags, so any instructions that the compiler has generated that are not available on power4 will cause an error: /usr/bin/as -a64 -mppc64 -mlittle-endian -mpower8 \ -I ./arch/powerpc/include -I ./arch/powerpc/include/generated \ -I ./include -I ./arch/powerpc/include/uapi \ -I ./arch/powerpc/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi -I arch/powerpc -I arch/powerpc \ -maltivec -mpower4 -o init/do_mounts.o /tmp/do_mounts-3b0a3d.s /tmp/do_mounts-51ce54.s:748: Error: unrecognized opcode: `isel' GCC does include -many, so the GCC driven gas call will succeed: as -v -I ./arch/powerpc/include -I ./arch/powerpc/include/generated -I ./include -I ./arch/powerpc/include/uapi -I ./arch/powerpc/include/generated/uapi -I ./include/uapi -I ./include/generated/uapi -I arch/powerpc -I arch/powerpc -a64 -mpower8 -many -mlittle -maltivec -mpower4 -o init/do_mounts.o Note that isel is power7 and above for IBM CPUs. GCC only generates it for Power9 and above, but the above test was run against the clang generated assembly. Peter Bergner explains: When using -many -mpower4, gas will first try and find a matching power4 mnemonic and failing that, it will then allow any valid mnemonic that gas knows about. GCC's use of -many predates me though. IIRC, Alan looked at trying to remove it, but I forget why he didn't. Could be either a gcc or gas issue at the time. I'm not sure whether issue still exists or not. He and I have modified how gas works internally a fair amount since he tried removing gcc use of -many. I will also note that when using -many, gas will choose the first mnemonic that matches in the mnemonic table and we have (mostly) sorted the table so that server mnemonics show up earlier in the table than other mnemonics, so they'll be seen/chosen first. By explicitly setting -many we can build with Clang and GCC while retaining the -mpower4 option. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-11 13:13:03 +10:30
[POWERPC] bootwrapper: Build multiple cuImages Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07 05:18:34 +11:00
powerpc/configs: Replace pseries_le_defconfig with a Makefile target using merge_config Rather than continuing to maintain a copy of pseries_defconfig with CONFIG_CPU_LITTLE_ENDIAN enabled, use the generic merge_config script and use an le.config to enable little endian on top of pseries_defconfig without the need for a duplicated _defconfig file. This method will require less maintenance in the future and will ensure that both 'defconfigs' are always in sync. It is worth noting that the seemingly more simple approach of: pseries_le_defconfig: pseries_defconfig $(Q)$(MAKE) le.config Will not work when building using O=builddir. The obvious fix to that: pseries_le_defconfig: $(Q)$(MAKE) -f $(srctree)/Makefile pseries_defconfig le.config Also does not work. This is because if we have for example: config FOO depends on CPU_BIG_ENDIAN select BAR Then BAR will be enabled by the first call to kconfig (via pseries_defconfig), and then will remain enabled after we merge le.config, even though FOO will have been turned off. The solution is to ensure to only invoke the kconfig logic once, after we have merged all the config fragments. This ensures nothing is select'ed on that should then be disabled by the later merged configs. This is done through the explicit call to make olddefconfig Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Reviewed-by: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com> [mpe: Massage change log, fix white space and use ARCH not SRCARCH] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-26 11:36:57 +10:00
kbuild: use INSTALLKERNEL to select customized installkernel script Replace the use of CROSS_COMPILE to select a customized installkernel script with the possibility to set INSTALLKERNEL to select a custom installkernel script when running make: make INSTALLKERNEL=arm-installkernel install With this patch we are now more consistent across different architectures - they did not all support use of CROSS_COMPILE. The use of CROSS_COMPILE was a hack as this really belongs to gcc/binutils and the installkernel script does not change just because we change toolchain. The use of CROSS_COMPILE caused troubles with an upcoming patch that saves CROSS_COMPILE when a kernel is built - it would no longer be installable. [Thanks to Peter Z. for this hint] This patch undos what Ian did in commit: 0f8e2d62fa04441cd12c08ce521e84e5bd3f8a46 ("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh") The patch has been lightly tested on x86 only - but all changes looks obvious. Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin] Acked-by: Russell King <linux@arm.linux.org.uk> [arm] Acked-by: Paul Mundt <lethal@linux-sh.org> [sh] Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86] Cc: Ian Campbell <icampbell@arcom.com> Cc: Tony Luck <tony.luck@intel.com> [ia64] Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64] Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r] Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc] Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390] Cc: Thomas Gleixner <tglx@linutronix.de> [x86] Cc: Ingo Molnar <mingo@redhat.com> [x86] Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-07-20 21:37:11 +02:00
powerpc/32: add stack protector support This functionality was tentatively added in the past (commit 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support")) but had to be reverted (commit f2574030b0e3 ("powerpc: Revert the initial stack protector support") because of GCC implementing it differently whether it had been built with libc support or not. Now, GCC offers the possibility to manually set the stack-protector mode (global or tls) regardless of libc support. This time, the patch selects HAVE_STACKPROTECTOR only if -mstack-protector-guard=tls is supported by GCC. On PPC32, as register r2 points to current task_struct at all time, the stack_canary located inside task_struct can be used directly by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary)) The protector is disabled for prom_init and bootx_init as it is too early to handle it properly. $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT [ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64 [ 134.943666] [ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835 [ 134.963380] Call Trace: [ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable) [ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260 [ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64 [ 134.982769] [c6615e00] [ffffffff] 0xffffffff Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-27 07:05:53 +00:00
powerpc/32: add stack protector support This functionality was tentatively added in the past (commit 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support")) but had to be reverted (commit f2574030b0e3 ("powerpc: Revert the initial stack protector support") because of GCC implementing it differently whether it had been built with libc support or not. Now, GCC offers the possibility to manually set the stack-protector mode (global or tls) regardless of libc support. This time, the patch selects HAVE_STACKPROTECTOR only if -mstack-protector-guard=tls is supported by GCC. On PPC32, as register r2 points to current task_struct at all time, the stack_canary located inside task_struct can be used directly by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary)) The protector is disabled for prom_init and bootx_init as it is too early to handle it properly. $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT [ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64 [ 134.943666] [ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835 [ 134.963380] Call Trace: [ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable) [ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260 [ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64 [ 134.982769] [c6615e00] [ffffffff] 0xffffffff Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-27 07:05:53 +00:00
powerpc/32: add stack protector support This functionality was tentatively added in the past (commit 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support")) but had to be reverted (commit f2574030b0e3 ("powerpc: Revert the initial stack protector support") because of GCC implementing it differently whether it had been built with libc support or not. Now, GCC offers the possibility to manually set the stack-protector mode (global or tls) regardless of libc support. This time, the patch selects HAVE_STACKPROTECTOR only if -mstack-protector-guard=tls is supported by GCC. On PPC32, as register r2 points to current task_struct at all time, the stack_canary located inside task_struct can be used directly by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary)) The protector is disabled for prom_init and bootx_init as it is too early to handle it properly. $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT [ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64 [ 134.943666] [ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835 [ 134.963380] Call Trace: [ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable) [ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260 [ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64 [ 134.982769] [c6615e00] [ffffffff] 0xffffffff Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-27 07:05:53 +00:00
powerpc/32: add stack protector support This functionality was tentatively added in the past (commit 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support")) but had to be reverted (commit f2574030b0e3 ("powerpc: Revert the initial stack protector support") because of GCC implementing it differently whether it had been built with libc support or not. Now, GCC offers the possibility to manually set the stack-protector mode (global or tls) regardless of libc support. This time, the patch selects HAVE_STACKPROTECTOR only if -mstack-protector-guard=tls is supported by GCC. On PPC32, as register r2 points to current task_struct at all time, the stack_canary located inside task_struct can be used directly by using the following GCC options: -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary)) The protector is disabled for prom_init and bootx_init as it is too early to handle it properly. $ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT [ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64 [ 134.943666] [ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835 [ 134.963380] Call Trace: [ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable) [ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260 [ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64 [ 134.982769] [c6615e00] [ffffffff] 0xffffffff Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-27 07:05:53 +00:00
powerpc/toc: Future proof kernel toc This patch future-proofs the kernel against linker changes that might put the toc pointer at some location other than .got+0x8000, by replacing __toc_start+0x8000 with .TOC. throughout. If the kernel's idea of the toc pointer doesn't agree with the linker, bad things happen. prom_init.c code relocating its toc is also changed so that a symbolic __prom_init_toc_start toc-pointer relative address is calculated rather than assuming that it is always at toc-pointer - 0x8000. The length calculations loading values from the toc are also avoided. It's a little incestuous to do that with unreloc_toc picking up adjusted values (which is fine in practice, they both adjust by the same amount if all goes well). I've also changed the way .got is aligned in vmlinux.lds and zImage.lds, mostly so that dumping out section info by objdump or readelf plainly shows the alignment is 256. This linker script feature was added 2005-09-27, available in FSF binutils releases from 2.17 onwards. Should be safe to use in the kernel, I think. Finally, put *(.got) before the prom_init.o entry which only needs *(.toc), so that the GOT header goes in the correct place. I don't believe this makes any difference for the kernel as it would for dynamic objects being loaded by ld.so. That change is just to stop lusers who blindly copy kernel scripts being led astray. Of course, this change needs the prom_init.c changes. Some notes on .toc and .got. .toc is a compiler generated section of addresses. .got is a linker generated section of addresses, generally built when the linker sees R_*_*GOT* relocations. In the case of powerpc64 ld.bfd, there are multiple generated .got sections, one per input object file. So you can somewhat reasonably write in a linker script an input section statement like *prom_init.o(.got .toc) to mean "the .got and .toc section for files matching *prom_init.o". On other architectures that doesn't make sense, because the linker generally has just one .got section. Even on powerpc64, note well that the GOT entries for prom_init.o may be merged with GOT entries from other objects. That means that if prom_init.o references, say, _end via some GOT relocation, and some other object also references _end via a GOT relocation, the GOT entry for _end may be in the range __prom_init_toc_start to __prom_init_toc_end and if the kernel does something special to GOT/TOC entries in that range then the value of _end as seen by objects other than prom_init.o will be affected. On the other hand the GOT entry for _end may not be in the range __prom_init_toc_start to __prom_init_toc_end. Which way it turns out is deterministic but a detail of linker operation that should not be relied on. A feature of ld.bfd is that input .toc (and .got) sections matching one linker input section statement may be sorted, to put entries used by small-model code first, near the toc base. This is why scripts for powerpc64 normally use *(.got .toc) rather than *(.got) *(.toc), since the first form allows more freedom to sort. Another feature of ld.bfd is that indirect addressing sequences using the GOT/TOC may be edited by the linker to relative addressing. In many cases relative addressing would be emitted by gcc for -mcmodel=medium if you appropriately decorate variable declarations with non-default visibility. The original patch is here: https://lore.kernel.org/linuxppc-dev/20210310034813.GM6042@bubble.grove.modra.org/ Signed-off-by: Alan Modra <amodra@au1.ibm.com> [aik: removed non-relocatable which is gone in 24d33ac5b8ffb] [aik: added <=2.24 check] [aik: because of llvm-as, kernel_toc_addr() uses "mr" instead of global register variable] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211221055904.555763-2-aik@ozlabs.ru
2021-12-21 16:58:59 +11:00
powerpc/toc: Future proof kernel toc This patch future-proofs the kernel against linker changes that might put the toc pointer at some location other than .got+0x8000, by replacing __toc_start+0x8000 with .TOC. throughout. If the kernel's idea of the toc pointer doesn't agree with the linker, bad things happen. prom_init.c code relocating its toc is also changed so that a symbolic __prom_init_toc_start toc-pointer relative address is calculated rather than assuming that it is always at toc-pointer - 0x8000. The length calculations loading values from the toc are also avoided. It's a little incestuous to do that with unreloc_toc picking up adjusted values (which is fine in practice, they both adjust by the same amount if all goes well). I've also changed the way .got is aligned in vmlinux.lds and zImage.lds, mostly so that dumping out section info by objdump or readelf plainly shows the alignment is 256. This linker script feature was added 2005-09-27, available in FSF binutils releases from 2.17 onwards. Should be safe to use in the kernel, I think. Finally, put *(.got) before the prom_init.o entry which only needs *(.toc), so that the GOT header goes in the correct place. I don't believe this makes any difference for the kernel as it would for dynamic objects being loaded by ld.so. That change is just to stop lusers who blindly copy kernel scripts being led astray. Of course, this change needs the prom_init.c changes. Some notes on .toc and .got. .toc is a compiler generated section of addresses. .got is a linker generated section of addresses, generally built when the linker sees R_*_*GOT* relocations. In the case of powerpc64 ld.bfd, there are multiple generated .got sections, one per input object file. So you can somewhat reasonably write in a linker script an input section statement like *prom_init.o(.got .toc) to mean "the .got and .toc section for files matching *prom_init.o". On other architectures that doesn't make sense, because the linker generally has just one .got section. Even on powerpc64, note well that the GOT entries for prom_init.o may be merged with GOT entries from other objects. That means that if prom_init.o references, say, _end via some GOT relocation, and some other object also references _end via a GOT relocation, the GOT entry for _end may be in the range __prom_init_toc_start to __prom_init_toc_end and if the kernel does something special to GOT/TOC entries in that range then the value of _end as seen by objects other than prom_init.o will be affected. On the other hand the GOT entry for _end may not be in the range __prom_init_toc_start to __prom_init_toc_end. Which way it turns out is deterministic but a detail of linker operation that should not be relied on. A feature of ld.bfd is that input .toc (and .got) sections matching one linker input section statement may be sorted, to put entries used by small-model code first, near the toc base. This is why scripts for powerpc64 normally use *(.got .toc) rather than *(.got) *(.toc), since the first form allows more freedom to sort. Another feature of ld.bfd is that indirect addressing sequences using the GOT/TOC may be edited by the linker to relative addressing. In many cases relative addressing would be emitted by gcc for -mcmodel=medium if you appropriately decorate variable declarations with non-default visibility. The original patch is here: https://lore.kernel.org/linuxppc-dev/20210310034813.GM6042@bubble.grove.modra.org/ Signed-off-by: Alan Modra <amodra@au1.ibm.com> [aik: removed non-relocatable which is gone in 24d33ac5b8ffb] [aik: added <=2.24 check] [aik: because of llvm-as, kernel_toc_addr() uses "mr" instead of global register variable] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211221055904.555763-2-aik@ozlabs.ru
2021-12-21 16:58:59 +11:00