linux/drivers/md/dm.c

3254 lines
76 KiB

dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-12 17:48:58 -07:00
dm: separate device deletion from dm_put This patch separates the device deletion code from dm_put() to make sure the deletion happens in the process context. By this patch, device deletion always occurs in an ioctl (process) context and dm_put() can be called in interrupt context. As a result, the request-based dm's bad dm_put() usage pointed out by Mikulas below disappears. http://marc.info/?l=dm-devel&m=126699981019735&w=2 Without this patch, I confirmed there is a case to crash the system: dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt()) Some more backgrounds and details: In request-based dm, a device opener can remove a mapped_device while the last request is still completing, because bios in the last request complete first and then the device opener can close and remove the mapped_device before the last request completes: CPU0 CPU1 ================================================================= <<INTERRUPT>> blk_end_request_all(clone_rq) blk_update_request(clone_rq) bio_endio(clone_bio) == end_clone_bio blk_update_request(orig_rq) bio_endio(orig_bio) <<I/O completed>> dm_blk_close() dev_remove() dm_put(md) <<Free md>> blk_finish_request(clone_rq) .... dm_end_request(clone_rq) free_rq_clone(clone_rq) blk_end_request_all(orig_rq) rq_completed(md) So request-based dm used dm_get()/dm_put() to hold md for each I/O until its request completion handling is fully done. However, the final dm_put() can call the device deletion code which must not be run in interrupt context and may cause kernel panic. To solve the problem, this patch moves the device deletion code, dm_destroy(), to predetermined places that is actually deleting the mapped_device in ioctl (process) context, and changes dm_put() just to decrement the reference count of the mapped_device. By this change, dm_put() can be used in any context and the symmetric model below is introduced: dm_create(): create a mapped_device dm_destroy(): destroy a mapped_device dm_get(): increment the reference count of a mapped_device dm_put(): decrement the reference count of a mapped_device dm_destroy() waits for all references of the mapped_device to disappear, then deletes the mapped_device. dm_destroy() uses active waiting with msleep(1), since deleting the mapped_device isn't performance-critical task. And since at this point, nobody opens the mapped_device and no new reference will be taken, the pending counts are just for racing completing activity and will eventually decrease to zero. For the unlikely case of the forced module unload, dm_destroy_immediate(), which doesn't wait and forcibly deletes the mapped_device, is also introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f" may be stuck and never return. And now, because the mapped_device is deleted at this point, subsequent accesses to the mapped_device may cause NULL pointer references. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:13:56 +01:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
block: Inline encryption support for blk-mq We must have some way of letting a storage device driver know what encryption context it should use for en/decrypting a request. However, it's the upper layers (like the filesystem/fscrypt) that know about and manages encryption contexts. As such, when the upper layer submits a bio to the block layer, and this bio eventually reaches a device driver with support for inline encryption, the device driver will need to have been told the encryption context for that bio. We want to communicate the encryption context from the upper layer to the storage device along with the bio, when the bio is submitted to the block layer. To do this, we add a struct bio_crypt_ctx to struct bio, which can represent an encryption context (note that we can't use the bi_private field in struct bio to do this because that field does not function to pass information across layers in the storage stack). We also introduce various functions to manipulate the bio_crypt_ctx and make the bio/request merging logic aware of the bio_crypt_ctx. We also make changes to blk-mq to make it handle bios with encryption contexts. blk-mq can merge many bios into the same request. These bios need to have contiguous data unit numbers (the necessary changes to blk-merge are also made to ensure this) - as such, it suffices to keep the data unit number of just the first bio, since that's all a storage driver needs to infer the data unit number to use for each data block in each bio in a request. blk-mq keeps track of the encryption context to be used for all the bios in a request with the request's rq_crypt_ctx. When the first bio is added to an empty request, blk-mq will program the encryption context of that bio into the request_queue's keyslot manager, and store the returned keyslot in the request's rq_crypt_ctx. All the functions to operate on encryption contexts are in blk-crypto.c. Upper layers only need to call bio_crypt_set_ctx with the encryption key, algorithm and data_unit_num; they don't have to worry about getting a keyslot for each encryption context, as blk-mq/blk-crypto handles that. Blk-crypto also makes it possible for request-based layered devices like dm-rq to make use of inline encryption hardware by cloning the rq_crypt_ctx and programming a keyslot in the new request_queue when necessary. Note that any user of the block layer can submit bios with an encryption context, such as filesystems, device-mapper targets, etc. Signed-off-by: Satya Tangirala <satyat@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-14 00:37:18 +00:00
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 13:43:05 +08:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 14:07:29 -07:00
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 14:07:29 -07:00
dm: fix BLK_STS_DM_REQUEUE handling when dm_io represents split bio Commit 7dd76d1feec7 ("dm: improve bio splitting and associated IO accounting") removed using cloned bio when dm io splitting is needed. Using bio_trim()+bio_inc_remaining() rather than bio_split()+bio_chain() causes multiple dm_io instances to share the same original bio, and it works fine if IOs are completed successfully. But a regression was caused for the case when BLK_STS_DM_REQUEUE is returned from any one of DM's cloned bios (whose dm_io share the same orig_bio). In this BLK_STS_DM_REQUEUE case only the mapped subset of the original bio for the current exact dm_io needs to be re-submitted. However, since the original bio is shared among all dm_io instances, the ->orig_bio actually only represents the last dm_io instance, so requeue can't work as expected. Also when more than one dm_io is requeued, the same original bio is requeued from all dm_io's completion handler, then race is caused. Fix this issue by still allocating one clone bio for completing io only, then io accounting can rely on ->orig_bio being unmodified. This is needed because the dm_io's sector_offset and sectors members are recorded relative to an unmodified ->orig_bio. In the future, we can go back to using bio_trim()+bio_inc_remaining() for dm's io splitting but then delay needing a bio clone only when handling BLK_STS_DM_REQUEUE, but that approach is a bit complicated (so it needs a development cycle): 1) bio clone needs to be done in task context 2) a block interface for unwinding bio is required Fixes: 7dd76d1feec7 ("dm: improve bio splitting and associated IO accounting") Reported-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-06-23 21:20:05 +08:00
dm: relax ordering of bio-based flush implementation Unlike REQ_HARDBARRIER, REQ_FLUSH/FUA doesn't mandate any ordering against other bio's. This patch relaxes ordering around flushes. * A flush bio is no longer deferred to workqueue directly. It's processed like other bio's but __split_and_process_bio() uses md->flush_bio as the clone source. md->flush_bio is initialized to empty flush during md initialization and shared for all flushes. * As a flush bio now travels through the same execution path as other bio's, there's no need for dedicated error handling path either. It can use the same error handling path in dec_pending(). Dedicated error handling removed along with md->flush_error. * When dec_pending() detects that a flush has completed, it checks whether the original bio has data. If so, the bio is queued to the deferred list w/ REQ_FLUSH cleared; otherwise, it's completed. * As flush sequencing is handled in the usual issue/completion path, dm_wq_work() no longer needs to handle flushes differently. Now its only responsibility is re-issuing deferred bio's the same way as _dm_request() would. REQ_FLUSH handling logic including process_flush() is dropped. * There's no reason for queue_io() and dm_wq_work() write lock dm->io_lock. queue_io() now only uses md->deferred_lock and dm_wq_work() read locks dm->io_lock. * bio's no longer need to be queued on the deferred list while a flush is in progress making DMF_QUEUE_IO_TO_THREAD unncessary. Drop it. This avoids stalling the device during flushes and simplifies the implementation. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-08 18:07:00 +02:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
[PATCH] dm: suspend: add noflush pushback In device-mapper I/O is sometimes queued within targets for later processing. For example the multipath target can be configured to store I/O when no paths are available instead of returning it -EIO. This patch allows the device-mapper core to instruct a target to transfer the contents of any such in-target queue back into the core. This frees up the resources used by the target so the core can replace that target with an alternative one and then resend the I/O to it. Without this patch the only way to change the target in such circumstances involves returning the I/O with an error back to the filesystem/application. In the multipath case, this patch will let us add new paths for existing I/O to try after all the existing paths have failed. DMF_NOFLUSH_SUSPENDING ---------------------- If the DM_NOFLUSH_FLAG ioctl option is specified at suspend time, the DMF_NOFLUSH_SUSPENDING flag is set in md->flags during dm_suspend(). It is always cleared before dm_suspend() returns. The flag must be visible while the target is flushing pending I/Os so it is set before presuspend where the flush starts and unset after the wait for md->pending where the flush ends. Target drivers can check this flag by calling dm_noflush_suspending(). DM_MAPIO_REQUEUE / DM_ENDIO_REQUEUE ----------------------------------- A target's map() function can now return DM_MAPIO_REQUEUE to request the device mapper core queue the bio. Similarly, a target's end_io() function can return DM_ENDIO_REQUEUE to request the same. This has been labelled 'pushback'. The __map_bio() and clone_endio() functions in the core treat these return values as errors and call dec_pending() to end the I/O. dec_pending ----------- dec_pending() saves the pushback request in struct dm_io->error. Once all the split clones have ended, dec_pending() will put the original bio on the md->pushback list. Note that this supercedes any I/O errors. It is possible for the suspend with DM_NOFLUSH_FLAG to be aborted while in progress (e.g. by user interrupt). dec_pending() checks for this and returns -EIO if it happened. pushdback list and pushback_lock -------------------------------- The bio is queued on md->pushback temporarily in dec_pending(), and after all pending I/Os return, md->pushback is merged into md->deferred in dm_suspend() for re-issuing at resume time. md->pushback_lock protects md->pushback. The lock should be held with irq disabled because dec_pending() can be called from interrupt context. Queueing bios to md->pushback in dec_pending() must be done atomically with the check for DMF_NOFLUSH_SUSPENDING flag. So md->pushback_lock is held when checking the flag. Otherwise dec_pending() may queue a bio to md->pushback after the interrupted dm_suspend() flushes md->pushback. Then the bio would be left in md->pushback. Flag setting in dm_suspend() can be done without md->pushback_lock because the flag is checked only after presuspend and the set value is already made visible via the target's presuspend function. The flag can be checked without md->pushback_lock (e.g. the first part of the dec_pending() or target drivers), because the flag is checked again with md->pushback_lock held when the bio is really queued to md->pushback as described above. So even if the flag is cleared after the lockless checkings, the bio isn't left in md->pushback but returned to applications with -EIO. Other notes on the current patch -------------------------------- - md->pushback is added to the struct mapped_device instead of using md->deferred directly because md->io_lock which protects md->deferred is rw_semaphore and can't be used in interrupt context like dec_pending(), and md->io_lock protects the DMF_BLOCK_IO flag of md->flags too. - Don't issue lock_fs() in dm_suspend() if the DM_NOFLUSH_FLAG ioctl option is specified, because I/Os generated by lock_fs() would be pushed back and never return if there were no valid devices. - If an error occurs in dm_suspend() after the DMF_NOFLUSH_SUSPENDING flag is set, md->pushback must be flushed because I/Os may be queued to the list already. (flush_and_out label in dm_suspend()) Test results ------------ I have tested using multipath target with the next patch. The following tests are for regression/compatibility: - I/Os succeed when valid paths exist; - I/Os fail when there are no valid paths and queue_if_no_path is not set; - I/Os are queued in the multipath target when there are no valid paths and queue_if_no_path is set; - The queued I/Os above fail when suspend is issued without the DM_NOFLUSH_FLAG ioctl option. I/Os spanning 2 multipath targets also fail. The following tests are for the normal code path of new pushback feature: - Queued I/Os in the multipath target are flushed from the target but don't return when suspend is issued with the DM_NOFLUSH_FLAG ioctl option; - The I/Os above are queued in the multipath target again when resume is issued without path recovery; - The I/Os above succeed when resume is issued after path recovery or table load; - Queued I/Os in the multipath target succeed when resume is issued with the DM_NOFLUSH_FLAG ioctl option after table load. I/Os spanning 2 multipath targets also succeed. The following tests are for the error paths of the new pushback feature: - When the bdget_disk() fails in dm_suspend(), the DMF_NOFLUSH_SUSPENDING flag is cleared and I/Os already queued to the pushback list are flushed properly. - When suspend with the DM_NOFLUSH_FLAG ioctl option is interrupted, o I/Os which had already been queued to the pushback list at the time don't return, and are re-issued at resume time; o I/Os which hadn't been returned at the time return with EIO. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 02:41:09 -08:00
dm: fix BLK_STS_DM_REQUEUE handling when dm_io represents split bio Commit 7dd76d1feec7 ("dm: improve bio splitting and associated IO accounting") removed using cloned bio when dm io splitting is needed. Using bio_trim()+bio_inc_remaining() rather than bio_split()+bio_chain() causes multiple dm_io instances to share the same original bio, and it works fine if IOs are completed successfully. But a regression was caused for the case when BLK_STS_DM_REQUEUE is returned from any one of DM's cloned bios (whose dm_io share the same orig_bio). In this BLK_STS_DM_REQUEUE case only the mapped subset of the original bio for the current exact dm_io needs to be re-submitted. However, since the original bio is shared among all dm_io instances, the ->orig_bio actually only represents the last dm_io instance, so requeue can't work as expected. Also when more than one dm_io is requeued, the same original bio is requeued from all dm_io's completion handler, then race is caused. Fix this issue by still allocating one clone bio for completing io only, then io accounting can rely on ->orig_bio being unmodified. This is needed because the dm_io's sector_offset and sectors members are recorded relative to an unmodified ->orig_bio. In the future, we can go back to using bio_trim()+bio_inc_remaining() for dm's io splitting but then delay needing a bio clone only when handling BLK_STS_DM_REQUEUE, but that approach is a bit complicated (so it needs a development cycle): 1) bio clone needs to be done in task context 2) a block interface for unwinding bio is required Fixes: 7dd76d1feec7 ("dm: improve bio splitting and associated IO accounting") Reported-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-06-23 21:20:05 +08:00
dm: disable DISCARD if the underlying storage no longer supports it Storage devices which report supporting discard commands like WRITE_SAME_16 with unmap, but reject discard commands sent to the storage device. This is a clear storage firmware bug but it doesn't change the fact that should a program cause discards to be sent to a multipath device layered on this buggy storage, all paths can end up failed at the same time from the discards, causing possible I/O loss. The first discard to a path will fail with Illegal Request, Invalid field in cdb, e.g.: kernel: sd 8:0:8:19: [sdfn] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE kernel: sd 8:0:8:19: [sdfn] tag#0 Sense Key : Illegal Request [current] kernel: sd 8:0:8:19: [sdfn] tag#0 Add. Sense: Invalid field in cdb kernel: sd 8:0:8:19: [sdfn] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 a0 08 00 00 00 80 00 00 00 kernel: blk_update_request: critical target error, dev sdfn, sector 10487808 The SCSI layer converts this to the BLK_STS_TARGET error number, the sd device disables its support for discard on this path, and because of the BLK_STS_TARGET error multipath fails the discard without failing any path or retrying down a different path. But subsequent discards can cause path failures. Any discards sent to the path which already failed a discard ends up failing with EIO from blk_cloned_rq_check_limits with an "over max size limit" error since the discard limit was set to 0 by the sd driver for the path. As the error is EIO, this now fails the path and multipath tries to send the discard down the next path. This cycle continues as discards are sent until all paths fail. Fix this by training DM core to disable DISCARD if the underlying storage already did so. Also, fix branching in dm_done() and clone_endio() to reflect the mutually exclussive nature of the IO operations in question. Cc: stable@vger.kernel.org Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-03 12:23:11 -04:00
dm: fix IO splitting Commit 882ec4e609c1 ("dm table: stack 'chunk_sectors' limit to account for target-specific splitting") caused a couple regressions: 1) Using lcm_not_zero() when stacking chunk_sectors was a bug because chunk_sectors must reflect the most limited of all devices in the IO stack. 2) DM targets that set max_io_len but that do _not_ provide an .iterate_devices method no longer had there IO split properly. And commit 5091cdec56fa ("dm: change max_io_len() to use blk_max_size_offset()") also caused a regression where DM no longer supported varied (per target) IO splitting. The implication being the potential for severely reduced performance for IO stacks that use a DM target like dm-cache to hide performance limitations of a slower device (e.g. one that requires 4K IO splitting). Coming full circle: Fix all these issues by discontinuing stacking chunk_sectors up using ti->max_io_len in dm_calculate_queue_limits(), add optional chunk_sectors override argument to blk_max_size_offset() and update DM's max_io_len() to pass ti->max_io_len to its blk_max_size_offset() call. Passing in an optional chunk_sectors override to blk_max_size_offset() allows for code reuse of block's centralized calculation for max IO size based on provided offset and split boundary. Fixes: 882ec4e609c1 ("dm table: stack 'chunk_sectors' limit to account for target-specific splitting") Fixes: 5091cdec56fa ("dm: change max_io_len() to use blk_max_size_offset()") Cc: stable@vger.kernel.org Reported-by: John Dorminy <jdorminy@redhat.com> Reported-by: Bruce Johnston <bjohnsto@redhat.com> Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: John Dorminy <jdorminy@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jens Axboe <axboe@kernel.dk>
2020-11-30 10:57:43 -05:00
dm: fix IO splitting Commit 882ec4e609c1 ("dm table: stack 'chunk_sectors' limit to account for target-specific splitting") caused a couple regressions: 1) Using lcm_not_zero() when stacking chunk_sectors was a bug because chunk_sectors must reflect the most limited of all devices in the IO stack. 2) DM targets that set max_io_len but that do _not_ provide an .iterate_devices method no longer had there IO split properly. And commit 5091cdec56fa ("dm: change max_io_len() to use blk_max_size_offset()") also caused a regression where DM no longer supported varied (per target) IO splitting. The implication being the potential for severely reduced performance for IO stacks that use a DM target like dm-cache to hide performance limitations of a slower device (e.g. one that requires 4K IO splitting). Coming full circle: Fix all these issues by discontinuing stacking chunk_sectors up using ti->max_io_len in dm_calculate_queue_limits(), add optional chunk_sectors override argument to blk_max_size_offset() and update DM's max_io_len() to pass ti->max_io_len to its blk_max_size_offset() call. Passing in an optional chunk_sectors override to blk_max_size_offset() allows for code reuse of block's centralized calculation for max IO size based on provided offset and split boundary. Fixes: 882ec4e609c1 ("dm table: stack 'chunk_sectors' limit to account for target-specific splitting") Fixes: 5091cdec56fa ("dm: change max_io_len() to use blk_max_size_offset()") Cc: stable@vger.kernel.org Reported-by: John Dorminy <jdorminy@redhat.com> Reported-by: Bruce Johnston <bjohnsto@redhat.com> Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: John Dorminy <jdorminy@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jens Axboe <axboe@kernel.dk>
2020-11-30 10:57:43 -05:00
dm: flush queued bios when process blocks to avoid deadlock Commit df2cb6daa4 ("block: Avoid deadlocks with bio allocation by stacking drivers") created a workqueue for every bio set and code in bio_alloc_bioset() that tries to resolve some low-memory deadlocks by redirecting bios queued on current->bio_list to the workqueue if the system is low on memory. However other deadlocks (see below **) may happen, without any low memory condition, because generic_make_request is queuing bios to current->bio_list (rather than submitting them). ** the related dm-snapshot deadlock is detailed here: https://www.redhat.com/archives/dm-devel/2016-July/msg00065.html Fix this deadlock by redirecting any bios on current->bio_list to the bio_set's rescue workqueue on every schedule() call. Consequently, when the process blocks on a mutex, the bios queued on current->bio_list are dispatched to independent workqueus and they can complete without waiting for the mutex to be available. The structure blk_plug contains an entry cb_list and this list can contain arbitrary callback functions that are called when the process blocks. To implement this fix DM (ab)uses the onstack plug's cb_list interface to get its flush_current_bio_list() called at schedule() time. This fixes the snapshot deadlock - if the map method blocks, flush_current_bio_list() will be called and it redirects bios waiting on current->bio_list to appropriate workqueues. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1267650 Depends-on: df2cb6daa4 ("block: Avoid deadlocks with bio allocation by stacking drivers") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-15 11:26:10 -05:00
dm: introduce zone append emulation For zoned targets that cannot support zone append operations, implement an emulation using regular write operations. If the original BIO submitted by the user is a zone append operation, change its clone into a regular write operation directed at the target zone write pointer position. To do so, an array of write pointer offsets (write pointer position relative to the start of a zone) is added to struct mapped_device. All operations that modify a sequential zone write pointer (writes, zone reset, zone finish and zone append) are intersepted in __map_bio() and processed using the new functions dm_zone_map_bio(). Detection of the target ability to natively support zone append operations is done from dm_table_set_restrictions() by calling the function dm_set_zones_restrictions(). A target that does not support zone append operation, either by explicitly declaring it using the new struct dm_target field zone_append_not_supported, or because the device table contains a non-zoned device, has its mapped device marked with the new flag DMF_ZONE_APPEND_EMULATED. The helper function dm_emulate_zone_append() is introduced to test a mapped device for this new flag. Atomicity of the zones write pointer tracking and updates is done using a zone write locking mechanism based on a bitmap. This is similar to the block layer method but based on BIOs rather than struct request. A zone write lock is taken in dm_zone_map_bio() for any clone BIO with an operation type that changes the BIO target zone write pointer position. The zone write lock is released if the clone BIO is failed before submission or when dm_zone_endio() is called when the clone BIO completes. The zone write lock bitmap of the mapped device, together with a bitmap indicating zone types (conv_zones_bitmap) and the write pointer offset array (zwp_offset) are allocated and initialized with a full device zone report in dm_set_zones_restrictions() using the function dm_revalidate_zones(). For failed operations that may have modified a zone write pointer, the zone write pointer offset is marked as invalid in dm_zone_endio(). Zones with an invalid write pointer offset are checked and the write pointer updated using an internal report zone operation when the faulty zone is accessed again by the user. All functions added for this emulation have a minimal overhead for zoned targets natively supporting zone append operations. Regular device targets are also not affected. The added code also does not impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all dm zone related functions. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 06:25:00 +09:00
2006-12-08 02:41:05 -08:00
dm: fix narrow race for REQ_NOWAIT bios being issued despite no support Starting with the commit 63a225c9fd20, device mapper has an optimization that it will take cheaper table lock (dm_get_live_table_fast instead of dm_get_live_table) if the bio has REQ_NOWAIT. The bios with REQ_NOWAIT must not block in the target request routine, if they did, we would be blocking while holding rcu_read_lock, which is prohibited. The targets that are suitable for REQ_NOWAIT optimization (and that don't block in the map routine) have the flag DM_TARGET_NOWAIT set. Device mapper will test if all the targets and all the devices in a table support nowait (see the function dm_table_supports_nowait) and it will set or clear the QUEUE_FLAG_NOWAIT flag on its request queue according to this check. There's a test in submit_bio_noacct: "if ((bio->bi_opf & REQ_NOWAIT) && !blk_queue_nowait(q)) goto not_supported" - this will make sure that REQ_NOWAIT bios can't enter a request queue that doesn't support them. This mechanism works to prevent REQ_NOWAIT bios from reaching dm targets that don't support the REQ_NOWAIT flag (and that may block in the map routine) - except that there is a small race condition: submit_bio_noacct checks if the queue has the QUEUE_FLAG_NOWAIT without holding any locks. Immediatelly after this check, the device mapper table may be reloaded with a table that doesn't support REQ_NOWAIT (for example, if we start moving the logical volume or if we activate a snapshot). However the REQ_NOWAIT bio that already passed the check in submit_bio_noacct would be sent to device mapper, where it could be redirected to a dm target that doesn't support REQ_NOWAIT - the result is sleeping while we hold rcu_read_lock. In order to fix this race, we double-check if the target supports REQ_NOWAIT while we hold the table lock (so that the table can't change under us). Fixes: 563a225c9fd2 ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-06-16 14:14:39 -04:00
dm: implement REQ_FLUSH/FUA support for bio-based dm This patch converts bio-based dm to support REQ_FLUSH/FUA instead of now deprecated REQ_HARDBARRIER. * -EOPNOTSUPP handling logic dropped. * Preflush is handled as before but postflush is dropped and replaced with passing down REQ_FUA to member request_queues. This replaces one array wide cache flush w/ member specific FUA writes. * __split_and_process_bio() now calls __clone_and_map_flush() directly for flushes and guarantees all FLUSH bio's going to targets are zero ` length. * It's now guaranteed that all FLUSH bio's which are passed onto dm targets are zero length. bio_empty_barrier() tests are replaced with REQ_FLUSH tests. * Empty WRITE_BARRIERs are replaced with WRITE_FLUSHes. * Dropped unlikely() around REQ_FLUSH tests. Flushes are not unlikely enough to be marked with unlikely(). * Block layer now filters out REQ_FLUSH/FUA bio's if the request_queue doesn't support cache flushing. Advertise REQ_FLUSH | REQ_FUA capability. * Request based dm isn't converted yet. dm_init_request_based_queue() resets flush support to 0 for now. To avoid disturbing request based dm code, dm->flush_error is added for bio based dm while requested based dm continues to use dm->barrier_error. Lightly tested linear, stripe, raid1, snap and crypt targets. Please proceed with caution as I'm not familiar with the code base. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: dm-devel@redhat.com Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-03 11:56:19 +02:00
dm: fix BLK_STS_DM_REQUEUE handling when dm_io represents split bio Commit 7dd76d1feec7 ("dm: improve bio splitting and associated IO accounting") removed using cloned bio when dm io splitting is needed. Using bio_trim()+bio_inc_remaining() rather than bio_split()+bio_chain() causes multiple dm_io instances to share the same original bio, and it works fine if IOs are completed successfully. But a regression was caused for the case when BLK_STS_DM_REQUEUE is returned from any one of DM's cloned bios (whose dm_io share the same orig_bio). In this BLK_STS_DM_REQUEUE case only the mapped subset of the original bio for the current exact dm_io needs to be re-submitted. However, since the original bio is shared among all dm_io instances, the ->orig_bio actually only represents the last dm_io instance, so requeue can't work as expected. Also when more than one dm_io is requeued, the same original bio is requeued from all dm_io's completion handler, then race is caused. Fix this issue by still allocating one clone bio for completing io only, then io accounting can rely on ->orig_bio being unmodified. This is needed because the dm_io's sector_offset and sectors members are recorded relative to an unmodified ->orig_bio. In the future, we can go back to using bio_trim()+bio_inc_remaining() for dm's io splitting but then delay needing a bio clone only when handling BLK_STS_DM_REQUEUE, but that approach is a bit complicated (so it needs a development cycle): 1) bio clone needs to be done in task context 2) a block interface for unwinding bio is required Fixes: 7dd76d1feec7 ("dm: improve bio splitting and associated IO accounting") Reported-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-06-23 21:20:05 +08:00
dm: add support for passing through inline crypto support Update the device-mapper core to support exposing the inline crypto support of the underlying device(s) through the device-mapper device. This works by creating a "passthrough keyslot manager" for the dm device, which declares support for encryption settings which all underlying devices support. When a supported setting is used, the bio cloning code handles cloning the crypto context to the bios for all the underlying devices. When an unsupported setting is used, the blk-crypto fallback is used as usual. Crypto support on each underlying device is ignored unless the corresponding dm target opts into exposing it. This is needed because for inline crypto to semantically operate on the original bio, the data must not be transformed by the dm target. Thus, targets like dm-linear can expose crypto support of the underlying device, but targets like dm-crypt can't. (dm-crypt could use inline crypto itself, though.) A DM device's table can only be changed if the "new" inline encryption capabilities are a (*not* necessarily strict) superset of the "old" inline encryption capabilities. Attempts to make changes to the table that result in some inline encryption capability becoming no longer supported will be rejected. For the sake of clarity, key eviction from underlying devices will be handled in a future patch. Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Satya Tangirala <satyat@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-02-01 05:10:17 +00:00
blk-crypto: rename blk_keyslot_manager to blk_crypto_profile blk_keyslot_manager is misnamed because it doesn't necessarily manage keyslots. It actually does several different things: - Contains the crypto capabilities of the device. - Provides functions to control the inline encryption hardware. Originally these were just for programming/evicting keyslots; however, new functionality (hardware-wrapped keys) will require new functions here which are unrelated to keyslots. Moreover, device-mapper devices already (ab)use "keyslot_evict" to pass key eviction requests to their underlying devices even though device-mapper devices don't have any keyslots themselves (so it really should be "evict_key", not "keyslot_evict"). - Sometimes (but not always!) it manages keyslots. Originally it always did, but device-mapper devices don't have keyslots themselves, so they use a "passthrough keyslot manager" which doesn't actually manage keyslots. This hack works, but the terminology is unnatural. Also, some hardware doesn't have keyslots and thus also uses a "passthrough keyslot manager" (support for such hardware is yet to be upstreamed, but it will happen eventually). Let's stop having keyslot managers which don't actually manage keyslots. Instead, rename blk_keyslot_manager to blk_crypto_profile. This is a fairly big change, since for consistency it also has to update keyslot manager-related function names, variable names, and comments -- not just the actual struct name. However it's still a fairly straightforward change, as it doesn't change any actual functionality. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20211018180453.40441-4-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 11:04:52 -07:00
dm: add support for passing through inline crypto support Update the device-mapper core to support exposing the inline crypto support of the underlying device(s) through the device-mapper device. This works by creating a "passthrough keyslot manager" for the dm device, which declares support for encryption settings which all underlying devices support. When a supported setting is used, the bio cloning code handles cloning the crypto context to the bios for all the underlying devices. When an unsupported setting is used, the blk-crypto fallback is used as usual. Crypto support on each underlying device is ignored unless the corresponding dm target opts into exposing it. This is needed because for inline crypto to semantically operate on the original bio, the data must not be transformed by the dm target. Thus, targets like dm-linear can expose crypto support of the underlying device, but targets like dm-crypt can't. (dm-crypt could use inline crypto itself, though.) A DM device's table can only be changed if the "new" inline encryption capabilities are a (*not* necessarily strict) superset of the "old" inline encryption capabilities. Attempts to make changes to the table that result in some inline encryption capability becoming no longer supported will be rejected. For the sake of clarity, key eviction from underlying devices will be handled in a future patch. Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Satya Tangirala <satyat@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-02-01 05:10:17 +00:00
blk-crypto: rename blk_keyslot_manager to blk_crypto_profile blk_keyslot_manager is misnamed because it doesn't necessarily manage keyslots. It actually does several different things: - Contains the crypto capabilities of the device. - Provides functions to control the inline encryption hardware. Originally these were just for programming/evicting keyslots; however, new functionality (hardware-wrapped keys) will require new functions here which are unrelated to keyslots. Moreover, device-mapper devices already (ab)use "keyslot_evict" to pass key eviction requests to their underlying devices even though device-mapper devices don't have any keyslots themselves (so it really should be "evict_key", not "keyslot_evict"). - Sometimes (but not always!) it manages keyslots. Originally it always did, but device-mapper devices don't have keyslots themselves, so they use a "passthrough keyslot manager" which doesn't actually manage keyslots. This hack works, but the terminology is unnatural. Also, some hardware doesn't have keyslots and thus also uses a "passthrough keyslot manager" (support for such hardware is yet to be upstreamed, but it will happen eventually). Let's stop having keyslot managers which don't actually manage keyslots. Instead, rename blk_keyslot_manager to blk_crypto_profile. This is a fairly big change, since for consistency it also has to update keyslot manager-related function names, variable names, and comments -- not just the actual struct name. However it's still a fairly straightforward change, as it doesn't change any actual functionality. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20211018180453.40441-4-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 11:04:52 -07:00
dm: add support for passing through inline crypto support Update the device-mapper core to support exposing the inline crypto support of the underlying device(s) through the device-mapper device. This works by creating a "passthrough keyslot manager" for the dm device, which declares support for encryption settings which all underlying devices support. When a supported setting is used, the bio cloning code handles cloning the crypto context to the bios for all the underlying devices. When an unsupported setting is used, the blk-crypto fallback is used as usual. Crypto support on each underlying device is ignored unless the corresponding dm target opts into exposing it. This is needed because for inline crypto to semantically operate on the original bio, the data must not be transformed by the dm target. Thus, targets like dm-linear can expose crypto support of the underlying device, but targets like dm-crypt can't. (dm-crypt could use inline crypto itself, though.) A DM device's table can only be changed if the "new" inline encryption capabilities are a (*not* necessarily strict) superset of the "old" inline encryption capabilities. Attempts to make changes to the table that result in some inline encryption capability becoming no longer supported will be rejected. For the sake of clarity, key eviction from underlying devices will be handled in a future patch. Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Satya Tangirala <satyat@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-02-01 05:10:17 +00:00
blk-crypto: rename blk_keyslot_manager to blk_crypto_profile blk_keyslot_manager is misnamed because it doesn't necessarily manage keyslots. It actually does several different things: - Contains the crypto capabilities of the device. - Provides functions to control the inline encryption hardware. Originally these were just for programming/evicting keyslots; however, new functionality (hardware-wrapped keys) will require new functions here which are unrelated to keyslots. Moreover, device-mapper devices already (ab)use "keyslot_evict" to pass key eviction requests to their underlying devices even though device-mapper devices don't have any keyslots themselves (so it really should be "evict_key", not "keyslot_evict"). - Sometimes (but not always!) it manages keyslots. Originally it always did, but device-mapper devices don't have keyslots themselves, so they use a "passthrough keyslot manager" which doesn't actually manage keyslots. This hack works, but the terminology is unnatural. Also, some hardware doesn't have keyslots and thus also uses a "passthrough keyslot manager" (support for such hardware is yet to be upstreamed, but it will happen eventually). Let's stop having keyslot managers which don't actually manage keyslots. Instead, rename blk_keyslot_manager to blk_crypto_profile. This is a fairly big change, since for consistency it also has to update keyslot manager-related function names, variable names, and comments -- not just the actual struct name. However it's still a fairly straightforward change, as it doesn't change any actual functionality. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20211018180453.40441-4-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 11:04:52 -07:00
dm: add support for passing through inline crypto support Update the device-mapper core to support exposing the inline crypto support of the underlying device(s) through the device-mapper device. This works by creating a "passthrough keyslot manager" for the dm device, which declares support for encryption settings which all underlying devices support. When a supported setting is used, the bio cloning code handles cloning the crypto context to the bios for all the underlying devices. When an unsupported setting is used, the blk-crypto fallback is used as usual. Crypto support on each underlying device is ignored unless the corresponding dm target opts into exposing it. This is needed because for inline crypto to semantically operate on the original bio, the data must not be transformed by the dm target. Thus, targets like dm-linear can expose crypto support of the underlying device, but targets like dm-crypt can't. (dm-crypt could use inline crypto itself, though.) A DM device's table can only be changed if the "new" inline encryption capabilities are a (*not* necessarily strict) superset of the "old" inline encryption capabilities. Attempts to make changes to the table that result in some inline encryption capability becoming no longer supported will be rejected. For the sake of clarity, key eviction from underlying devices will be handled in a future patch. Co-developed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Satya Tangirala <satyat@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-02-01 05:10:17 +00:00
dm: fix use-after-free in dm_cleanup_zoned_dev() dm_cleanup_zoned_dev() uses queue, so it must be called before blk_cleanup_disk() starts its killing: blk_cleanup_disk->blk_cleanup_queue()->kobject_put()->blk_release_queue()-> ->...RCU...->blk_free_queue_rcu()->kmem_cache_free() Otherwise, RCU callback may be executed first and dm_cleanup_zoned_dev() will touch free'd memory: BUG: KASAN: use-after-free in dm_cleanup_zoned_dev+0x33/0xd0 Read of size 8 at addr ffff88805ac6e430 by task dmsetup/681 CPU: 4 PID: 681 Comm: dmsetup Not tainted 5.17.0-rc2+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x7d print_address_description.constprop.0+0x1f/0x150 ? dm_cleanup_zoned_dev+0x33/0xd0 kasan_report.cold+0x7f/0x11b ? dm_cleanup_zoned_dev+0x33/0xd0 dm_cleanup_zoned_dev+0x33/0xd0 __dm_destroy+0x26a/0x400 ? dm_blk_ioctl+0x230/0x230 ? up_write+0xd8/0x270 dev_remove+0x156/0x1d0 ctl_ioctl+0x269/0x530 ? table_clear+0x140/0x140 ? lock_release+0xb2/0x750 ? remove_all+0x40/0x40 ? rcu_read_lock_sched_held+0x12/0x70 ? lock_downgrade+0x3c0/0x3c0 ? rcu_read_lock_sched_held+0x12/0x70 dm_ctl_ioctl+0xa/0x10 __x64_sys_ioctl+0xb9/0xf0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fb6dfa95c27 Fixes: bb37d77239af ("dm: introduce zone append emulation") Cc: stable@vger.kernel.org Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2022-02-01 11:39:52 +03:00
blk-crypto: rename blk_keyslot_manager to blk_crypto_profile blk_keyslot_manager is misnamed because it doesn't necessarily manage keyslots. It actually does several different things: - Contains the crypto capabilities of the device. - Provides functions to control the inline encryption hardware. Originally these were just for programming/evicting keyslots; however, new functionality (hardware-wrapped keys) will require new functions here which are unrelated to keyslots. Moreover, device-mapper devices already (ab)use "keyslot_evict" to pass key eviction requests to their underlying devices even though device-mapper devices don't have any keyslots themselves (so it really should be "evict_key", not "keyslot_evict"). - Sometimes (but not always!) it manages keyslots. Originally it always did, but device-mapper devices don't have keyslots themselves, so they use a "passthrough keyslot manager" which doesn't actually manage keyslots. This hack works, but the terminology is unnatural. Also, some hardware doesn't have keyslots and thus also uses a "passthrough keyslot manager" (support for such hardware is yet to be upstreamed, but it will happen eventually). Let's stop having keyslot managers which don't actually manage keyslots. Instead, rename blk_keyslot_manager to blk_crypto_profile. This is a fairly big change, since for consistency it also has to update keyslot manager-related function names, variable names, and comments -- not just the actual struct name. However it's still a fairly straightforward change, as it doesn't change any actual functionality. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20211018180453.40441-4-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 11:04:52 -07:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: allow active and inactive tables to share dm_devs Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-13 13:53:43 -05:00
dm: fix thaw_bdev This patch fixes a bd_mount_sem counter corruption bug in device-mapper. thaw_bdev() should be called only when freeze_bdev() was called for the device. Otherwise, thaw_bdev() will up bd_mount_sem and corrupt the semaphore counter. struct block_device with the corrupted semaphore may remain in slab cache and be reused later. Attached patch will fix it by calling unlock_fs() instead. unlock_fs() will determine whether it should call thaw_bdev() by checking the device is frozen or not. Easy reproducer is: #!/bin/sh while [ 1 ]; do dmsetup --notable create a dmsetup --nolockfs suspend a dmsetup remove a done It's not easy to see the effect of corrupted semaphore. So I have tested with putting printk below in bdev_alloc_inode(): if (atomic_read(&ei->bdev.bd_mount_sem.count) != 1) printk(KERN_DEBUG "Incorrect semaphore count = %d (%p)\n", atomic_read(&ei->bdev.bd_mount_sem.count), &ei->bdev); Without the patch, I saw something like: Incorrect semaphore count = 17 (f2ab91c0) With the patch, the message didn't appear. The bug was introduced in 2.6.16 with this bug fix: commit d9dde59ba03095e526640988c0fedd75e93bc8b7 Date: Fri Feb 24 13:04:24 2006 -0800 [PATCH] dm: missing bdput/thaw_bdev at removal Need to unfreeze and release bdev otherwise the bdev inode with inconsistent state is reused later and cause problem. and backported to 2.6.15.5. It occurs only in free_dev(), which is called only when the dm device is removed. The buggy code is executed only if md->suspended_bdev is non-NULL and that can happen only when the device was suspended without noflush. Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: stable@kernel.org
2007-10-19 22:38:43 +01:00
dm: introduce zone append emulation For zoned targets that cannot support zone append operations, implement an emulation using regular write operations. If the original BIO submitted by the user is a zone append operation, change its clone into a regular write operation directed at the target zone write pointer position. To do so, an array of write pointer offsets (write pointer position relative to the start of a zone) is added to struct mapped_device. All operations that modify a sequential zone write pointer (writes, zone reset, zone finish and zone append) are intersepted in __map_bio() and processed using the new functions dm_zone_map_bio(). Detection of the target ability to natively support zone append operations is done from dm_table_set_restrictions() by calling the function dm_set_zones_restrictions(). A target that does not support zone append operation, either by explicitly declaring it using the new struct dm_target field zone_append_not_supported, or because the device table contains a non-zoned device, has its mapped device marked with the new flag DMF_ZONE_APPEND_EMULATED. The helper function dm_emulate_zone_append() is introduced to test a mapped device for this new flag. Atomicity of the zones write pointer tracking and updates is done using a zone write locking mechanism based on a bitmap. This is similar to the block layer method but based on BIOs rather than struct request. A zone write lock is taken in dm_zone_map_bio() for any clone BIO with an operation type that changes the BIO target zone write pointer position. The zone write lock is released if the clone BIO is failed before submission or when dm_zone_endio() is called when the clone BIO completes. The zone write lock bitmap of the mapped device, together with a bitmap indicating zone types (conv_zones_bitmap) and the write pointer offset array (zwp_offset) are allocated and initialized with a full device zone report in dm_set_zones_restrictions() using the function dm_revalidate_zones(). For failed operations that may have modified a zone write pointer, the zone write pointer offset is marked as invalid in dm_zone_endio(). Zones with an invalid write pointer offset are checked and the write pointer updated using an internal report zone operation when the faulty zone is accessed again by the user. All functions added for this emulation have a minimal overhead for zoned targets natively supporting zone append operations. Regular device targets are also not affected. The added code also does not impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all dm zone related functions. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 06:25:00 +09:00
dm ima: measure data on table load DM configures a block device with various target specific attributes passed to it as a table. DM loads the table, and calls each target’s respective constructors with the attributes as input parameters. Some of these attributes are critical to ensure the device meets certain security bar. Thus, IMA should measure these attributes, to ensure they are not tampered with, during the lifetime of the device. So that the external services can have high confidence in the configuration of the block-devices on a given system. Some devices may have large tables. And a given device may change its state (table-load, suspend, resume, rename, remove, table-clear etc.) many times. Measuring these attributes each time when the device changes its state will significantly increase the size of the IMA logs. Further, once configured, these attributes are not expected to change unless a new table is loaded, or a device is removed and recreated. Therefore the clear-text of the attributes should only be measured during table load, and the hash of the active/inactive table should be measured for the remaining device state changes. Export IMA function ima_measure_critical_data() to allow measurement of DM device parameters, as well as target specific attributes, during table load. Compute the hash of the inactive table and store it for measurements during future state change. If a load is called multiple times, update the inactive table hash with the hash of the latest populated table. So that the correct inactive table hash is measured when the device transitions to different states like resume, remove, rename, etc. Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-07-12 17:48:58 -07:00
dm mpath: disable WRITE SAME if it fails Workaround the SCSI layer's problematic WRITE SAME heuristics by disabling WRITE SAME in the DM multipath device's queue_limits if an underlying device disabled it. The WRITE SAME heuristics, with both the original commit 5db44863b6eb ("[SCSI] sd: Implement support for WRITE SAME") and the updated commit 66c28f971 ("[SCSI] sd: Update WRITE SAME heuristics"), default to enabling WRITE SAME(10) even without successfully determining it is supported. After the first failed WRITE SAME the SCSI layer will disable WRITE SAME for the device (by setting sdkp->device->no_write_same which results in 'max_write_same_sectors' in device's queue_limits to be set to 0). When a device is stacked ontop of such a SCSI device any changes to that SCSI device's queue_limits do not automatically propagate up the stack. As such, a DM multipath device will not have its WRITE SAME support disabled. This causes the block layer to continue to issue WRITE SAME requests to the mpath device which causes paths to fail and (if mpath IO isn't configured to queue when no paths are available) it will result in actual IO errors to the upper layers. This fix doesn't help configurations that have additional devices stacked ontop of the mpath device (e.g. LVM created linear DM devices ontop). A proper fix that restacks all the queue_limits from the bottom of the device stack up will need to be explored if SCSI will continue to use this model of optimistically allowing op codes and then disabling them after they fail for the first time. Before this patch: EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) device-mapper: multipath: XXX snitm debugging: got -EREMOTEIO (-121) device-mapper: multipath: XXX snitm debugging: failing WRITE SAME IO with error=-121 end_request: critical target error, dev dm-6, sector 528 dm-6: WRITE SAME failed. Manually zeroing. device-mapper: multipath: Failing path 8:112. end_request: I/O error, dev dm-6, sector 4616 dm-6: WRITE SAME failed. Manually zeroing. end_request: I/O error, dev dm-6, sector 4616 end_request: I/O error, dev dm-6, sector 5640 end_request: I/O error, dev dm-6, sector 6664 end_request: I/O error, dev dm-6, sector 7688 end_request: I/O error, dev dm-6, sector 524288 Buffer I/O error on device dm-6, logical block 65536 lost page write due to I/O error on dm-6 JBD2: Error -5 detected when updating journal superblock for dm-6-8. end_request: I/O error, dev dm-6, sector 524296 Aborting journal on device dm-6-8. end_request: I/O error, dev dm-6, sector 524288 Buffer I/O error on device dm-6, logical block 65536 lost page write due to I/O error on dm-6 JBD2: Error -5 detected when updating journal superblock for dm-6-8. # cat /sys/block/sdh/queue/write_same_max_bytes 0 # cat /sys/block/dm-6/queue/write_same_max_bytes 33553920 After this patch: EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) device-mapper: multipath: XXX snitm debugging: got -EREMOTEIO (-121) device-mapper: multipath: XXX snitm debugging: WRITE SAME I/O failed with error=-121 end_request: critical target error, dev dm-6, sector 528 dm-6: WRITE SAME failed. Manually zeroing. # cat /sys/block/sdh/queue/write_same_max_bytes 0 # cat /sys/block/dm-6/queue/write_same_max_bytes 0 It should be noted that WRITE SAME support wasn't enabled in DM multipath until v3.10. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org # 3.10+
2013-09-19 12:13:58 -04:00
dm: do not initialise full request queue when bio based Change bio-based mapped devices no longer to have a fully initialized request_queue (request_fn, elevator, etc). This means bio-based DM devices no longer register elevator sysfs attributes ('iosched/' tree or 'scheduler' other than "none"). In contrast, a request-based DM device will continue to have a full request_queue and will register elevator sysfs attributes. Therefore a user can determine a DM device's type by checking if elevator sysfs attributes exist. First allocate a minimalist request_queue structure for a DM device (needed for both bio and request-based DM). Initialization of a full request_queue is deferred until it is known that the DM device is request-based, at the end of the table load sequence. Factor DM device's request_queue initialization: - common to both request-based and bio-based into dm_init_md_queue(). - specific to request-based into dm_init_request_based_queue(). The md->type_lock mutex is used to protect md->queue, in addition to md->type, during table_load(). A DM device's first table_load will establish the immutable md->type. But md->queue initialization, based on md->type, may fail at that time (because blk_init_allocated_queue cannot allocate memory). Therefore any subsequent table_load must (re)try dm_setup_md_queue independently of establishing md->type. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:02 +01:00
dm: do not initialise full request queue when bio based Change bio-based mapped devices no longer to have a fully initialized request_queue (request_fn, elevator, etc). This means bio-based DM devices no longer register elevator sysfs attributes ('iosched/' tree or 'scheduler' other than "none"). In contrast, a request-based DM device will continue to have a full request_queue and will register elevator sysfs attributes. Therefore a user can determine a DM device's type by checking if elevator sysfs attributes exist. First allocate a minimalist request_queue structure for a DM device (needed for both bio and request-based DM). Initialization of a full request_queue is deferred until it is known that the DM device is request-based, at the end of the table load sequence. Factor DM device's request_queue initialization: - common to both request-based and bio-based into dm_init_md_queue(). - specific to request-based into dm_init_request_based_queue(). The md->type_lock mutex is used to protect md->queue, in addition to md->type, during table_load(). A DM device's first table_load will establish the immutable md->type. But md->queue initialization, based on md->type, may fail at that time (because blk_init_allocated_queue cannot allocate memory). Therefore any subsequent table_load must (re)try dm_setup_md_queue independently of establishing md->type. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:02 +01:00
dm: do not initialise full request queue when bio based Change bio-based mapped devices no longer to have a fully initialized request_queue (request_fn, elevator, etc). This means bio-based DM devices no longer register elevator sysfs attributes ('iosched/' tree or 'scheduler' other than "none"). In contrast, a request-based DM device will continue to have a full request_queue and will register elevator sysfs attributes. Therefore a user can determine a DM device's type by checking if elevator sysfs attributes exist. First allocate a minimalist request_queue structure for a DM device (needed for both bio and request-based DM). Initialization of a full request_queue is deferred until it is known that the DM device is request-based, at the end of the table load sequence. Factor DM device's request_queue initialization: - common to both request-based and bio-based into dm_init_md_queue(). - specific to request-based into dm_init_request_based_queue(). The md->type_lock mutex is used to protect md->queue, in addition to md->type, during table_load(). A DM device's first table_load will establish the immutable md->type. But md->queue initialization, based on md->type, may fail at that time (because blk_init_allocated_queue cannot allocate memory). Therefore any subsequent table_load must (re)try dm_setup_md_queue independently of establishing md->type. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:02 +01:00
dm: introduce zone append emulation For zoned targets that cannot support zone append operations, implement an emulation using regular write operations. If the original BIO submitted by the user is a zone append operation, change its clone into a regular write operation directed at the target zone write pointer position. To do so, an array of write pointer offsets (write pointer position relative to the start of a zone) is added to struct mapped_device. All operations that modify a sequential zone write pointer (writes, zone reset, zone finish and zone append) are intersepted in __map_bio() and processed using the new functions dm_zone_map_bio(). Detection of the target ability to natively support zone append operations is done from dm_table_set_restrictions() by calling the function dm_set_zones_restrictions(). A target that does not support zone append operation, either by explicitly declaring it using the new struct dm_target field zone_append_not_supported, or because the device table contains a non-zoned device, has its mapped device marked with the new flag DMF_ZONE_APPEND_EMULATED. The helper function dm_emulate_zone_append() is introduced to test a mapped device for this new flag. Atomicity of the zones write pointer tracking and updates is done using a zone write locking mechanism based on a bitmap. This is similar to the block layer method but based on BIOs rather than struct request. A zone write lock is taken in dm_zone_map_bio() for any clone BIO with an operation type that changes the BIO target zone write pointer position. The zone write lock is released if the clone BIO is failed before submission or when dm_zone_endio() is called when the clone BIO completes. The zone write lock bitmap of the mapped device, together with a bitmap indicating zone types (conv_zones_bitmap) and the write pointer offset array (zwp_offset) are allocated and initialized with a full device zone report in dm_set_zones_restrictions() using the function dm_revalidate_zones(). For failed operations that may have modified a zone write pointer, the zone write pointer offset is marked as invalid in dm_zone_endio(). Zones with an invalid write pointer offset are checked and the write pointer updated using an internal report zone operation when the faulty zone is accessed again by the user. All functions added for this emulation have a minimal overhead for zoned targets natively supporting zone append operations. Regular device targets are also not affected. The added code also does not impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all dm zone related functions. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 06:25:00 +09:00
dm: do not initialise full request queue when bio based Change bio-based mapped devices no longer to have a fully initialized request_queue (request_fn, elevator, etc). This means bio-based DM devices no longer register elevator sysfs attributes ('iosched/' tree or 'scheduler' other than "none"). In contrast, a request-based DM device will continue to have a full request_queue and will register elevator sysfs attributes. Therefore a user can determine a DM device's type by checking if elevator sysfs attributes exist. First allocate a minimalist request_queue structure for a DM device (needed for both bio and request-based DM). Initialization of a full request_queue is deferred until it is known that the DM device is request-based, at the end of the table load sequence. Factor DM device's request_queue initialization: - common to both request-based and bio-based into dm_init_md_queue(). - specific to request-based into dm_init_request_based_queue(). The md->type_lock mutex is used to protect md->queue, in addition to md->type, during table_load(). A DM device's first table_load will establish the immutable md->type. But md->queue initialization, based on md->type, may fail at that time (because blk_init_allocated_queue cannot allocate memory). Therefore any subsequent table_load must (re)try dm_setup_md_queue independently of establishing md->type. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:02 +01:00
dm: separate device deletion from dm_put This patch separates the device deletion code from dm_put() to make sure the deletion happens in the process context. By this patch, device deletion always occurs in an ioctl (process) context and dm_put() can be called in interrupt context. As a result, the request-based dm's bad dm_put() usage pointed out by Mikulas below disappears. http://marc.info/?l=dm-devel&m=126699981019735&w=2 Without this patch, I confirmed there is a case to crash the system: dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt()) Some more backgrounds and details: In request-based dm, a device opener can remove a mapped_device while the last request is still completing, because bios in the last request complete first and then the device opener can close and remove the mapped_device before the last request completes: CPU0 CPU1 ================================================================= <<INTERRUPT>> blk_end_request_all(clone_rq) blk_update_request(clone_rq) bio_endio(clone_bio) == end_clone_bio blk_update_request(orig_rq) bio_endio(orig_bio) <<I/O completed>> dm_blk_close() dev_remove() dm_put(md) <<Free md>> blk_finish_request(clone_rq) .... dm_end_request(clone_rq) free_rq_clone(clone_rq) blk_end_request_all(orig_rq) rq_completed(md) So request-based dm used dm_get()/dm_put() to hold md for each I/O until its request completion handling is fully done. However, the final dm_put() can call the device deletion code which must not be run in interrupt context and may cause kernel panic. To solve the problem, this patch moves the device deletion code, dm_destroy(), to predetermined places that is actually deleting the mapped_device in ioctl (process) context, and changes dm_put() just to decrement the reference count of the mapped_device. By this change, dm_put() can be used in any context and the symmetric model below is introduced: dm_create(): create a mapped_device dm_destroy(): destroy a mapped_device dm_get(): increment the reference count of a mapped_device dm_put(): decrement the reference count of a mapped_device dm_destroy() waits for all references of the mapped_device to disappear, then deletes the mapped_device. dm_destroy() uses active waiting with msleep(1), since deleting the mapped_device isn't performance-critical task. And since at this point, nobody opens the mapped_device and no new reference will be taken, the pending counts are just for racing completing activity and will eventually decrease to zero. For the unlikely case of the forced module unload, dm_destroy_immediate(), which doesn't wait and forcibly deletes the mapped_device, is also introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f" may be stuck and never return. And now, because the mapped_device is deleted at this point, subsequent accesses to the mapped_device may cause NULL pointer references. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:13:56 +01:00
dm: separate device deletion from dm_put This patch separates the device deletion code from dm_put() to make sure the deletion happens in the process context. By this patch, device deletion always occurs in an ioctl (process) context and dm_put() can be called in interrupt context. As a result, the request-based dm's bad dm_put() usage pointed out by Mikulas below disappears. http://marc.info/?l=dm-devel&m=126699981019735&w=2 Without this patch, I confirmed there is a case to crash the system: dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt()) Some more backgrounds and details: In request-based dm, a device opener can remove a mapped_device while the last request is still completing, because bios in the last request complete first and then the device opener can close and remove the mapped_device before the last request completes: CPU0 CPU1 ================================================================= <<INTERRUPT>> blk_end_request_all(clone_rq) blk_update_request(clone_rq) bio_endio(clone_bio) == end_clone_bio blk_update_request(orig_rq) bio_endio(orig_bio) <<I/O completed>> dm_blk_close() dev_remove() dm_put(md) <<Free md>> blk_finish_request(clone_rq) .... dm_end_request(clone_rq) free_rq_clone(clone_rq) blk_end_request_all(orig_rq) rq_completed(md) So request-based dm used dm_get()/dm_put() to hold md for each I/O until its request completion handling is fully done. However, the final dm_put() can call the device deletion code which must not be run in interrupt context and may cause kernel panic. To solve the problem, this patch moves the device deletion code, dm_destroy(), to predetermined places that is actually deleting the mapped_device in ioctl (process) context, and changes dm_put() just to decrement the reference count of the mapped_device. By this change, dm_put() can be used in any context and the symmetric model below is introduced: dm_create(): create a mapped_device dm_destroy(): destroy a mapped_device dm_get(): increment the reference count of a mapped_device dm_put(): decrement the reference count of a mapped_device dm_destroy() waits for all references of the mapped_device to disappear, then deletes the mapped_device. dm_destroy() uses active waiting with msleep(1), since deleting the mapped_device isn't performance-critical task. And since at this point, nobody opens the mapped_device and no new reference will be taken, the pending counts are just for racing completing activity and will eventually decrease to zero. For the unlikely case of the forced module unload, dm_destroy_immediate(), which doesn't wait and forcibly deletes the mapped_device, is also introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f" may be stuck and never return. And now, because the mapped_device is deleted at this point, subsequent accesses to the mapped_device may cause NULL pointer references. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:13:56 +01:00
dm: separate device deletion from dm_put This patch separates the device deletion code from dm_put() to make sure the deletion happens in the process context. By this patch, device deletion always occurs in an ioctl (process) context and dm_put() can be called in interrupt context. As a result, the request-based dm's bad dm_put() usage pointed out by Mikulas below disappears. http://marc.info/?l=dm-devel&m=126699981019735&w=2 Without this patch, I confirmed there is a case to crash the system: dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt()) Some more backgrounds and details: In request-based dm, a device opener can remove a mapped_device while the last request is still completing, because bios in the last request complete first and then the device opener can close and remove the mapped_device before the last request completes: CPU0 CPU1 ================================================================= <<INTERRUPT>> blk_end_request_all(clone_rq) blk_update_request(clone_rq) bio_endio(clone_bio) == end_clone_bio blk_update_request(orig_rq) bio_endio(orig_bio) <<I/O completed>> dm_blk_close() dev_remove() dm_put(md) <<Free md>> blk_finish_request(clone_rq) .... dm_end_request(clone_rq) free_rq_clone(clone_rq) blk_end_request_all(orig_rq) rq_completed(md) So request-based dm used dm_get()/dm_put() to hold md for each I/O until its request completion handling is fully done. However, the final dm_put() can call the device deletion code which must not be run in interrupt context and may cause kernel panic. To solve the problem, this patch moves the device deletion code, dm_destroy(), to predetermined places that is actually deleting the mapped_device in ioctl (process) context, and changes dm_put() just to decrement the reference count of the mapped_device. By this change, dm_put() can be used in any context and the symmetric model below is introduced: dm_create(): create a mapped_device dm_destroy(): destroy a mapped_device dm_get(): increment the reference count of a mapped_device dm_put(): decrement the reference count of a mapped_device dm_destroy() waits for all references of the mapped_device to disappear, then deletes the mapped_device. dm_destroy() uses active waiting with msleep(1), since deleting the mapped_device isn't performance-critical task. And since at this point, nobody opens the mapped_device and no new reference will be taken, the pending counts are just for racing completing activity and will eventually decrease to zero. For the unlikely case of the forced module unload, dm_destroy_immediate(), which doesn't wait and forcibly deletes the mapped_device, is also introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f" may be stuck and never return. And now, because the mapped_device is deleted at this point, subsequent accesses to the mapped_device may cause NULL pointer references. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:13:56 +01:00
dm: separate device deletion from dm_put This patch separates the device deletion code from dm_put() to make sure the deletion happens in the process context. By this patch, device deletion always occurs in an ioctl (process) context and dm_put() can be called in interrupt context. As a result, the request-based dm's bad dm_put() usage pointed out by Mikulas below disappears. http://marc.info/?l=dm-devel&m=126699981019735&w=2 Without this patch, I confirmed there is a case to crash the system: dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt()) Some more backgrounds and details: In request-based dm, a device opener can remove a mapped_device while the last request is still completing, because bios in the last request complete first and then the device opener can close and remove the mapped_device before the last request completes: CPU0 CPU1 ================================================================= <<INTERRUPT>> blk_end_request_all(clone_rq) blk_update_request(clone_rq) bio_endio(clone_bio) == end_clone_bio blk_update_request(orig_rq) bio_endio(orig_bio) <<I/O completed>> dm_blk_close() dev_remove() dm_put(md) <<Free md>> blk_finish_request(clone_rq) .... dm_end_request(clone_rq) free_rq_clone(clone_rq) blk_end_request_all(orig_rq) rq_completed(md) So request-based dm used dm_get()/dm_put() to hold md for each I/O until its request completion handling is fully done. However, the final dm_put() can call the device deletion code which must not be run in interrupt context and may cause kernel panic. To solve the problem, this patch moves the device deletion code, dm_destroy(), to predetermined places that is actually deleting the mapped_device in ioctl (process) context, and changes dm_put() just to decrement the reference count of the mapped_device. By this change, dm_put() can be used in any context and the symmetric model below is introduced: dm_create(): create a mapped_device dm_destroy(): destroy a mapped_device dm_get(): increment the reference count of a mapped_device dm_put(): decrement the reference count of a mapped_device dm_destroy() waits for all references of the mapped_device to disappear, then deletes the mapped_device. dm_destroy() uses active waiting with msleep(1), since deleting the mapped_device isn't performance-critical task. And since at this point, nobody opens the mapped_device and no new reference will be taken, the pending counts are just for racing completing activity and will eventually decrease to zero. For the unlikely case of the forced module unload, dm_destroy_immediate(), which doesn't wait and forcibly deletes the mapped_device, is also introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f" may be stuck and never return. And now, because the mapped_device is deleted at this point, subsequent accesses to the mapped_device may cause NULL pointer references. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:13:56 +01:00
dm: separate device deletion from dm_put This patch separates the device deletion code from dm_put() to make sure the deletion happens in the process context. By this patch, device deletion always occurs in an ioctl (process) context and dm_put() can be called in interrupt context. As a result, the request-based dm's bad dm_put() usage pointed out by Mikulas below disappears. http://marc.info/?l=dm-devel&m=126699981019735&w=2 Without this patch, I confirmed there is a case to crash the system: dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt()) Some more backgrounds and details: In request-based dm, a device opener can remove a mapped_device while the last request is still completing, because bios in the last request complete first and then the device opener can close and remove the mapped_device before the last request completes: CPU0 CPU1 ================================================================= <<INTERRUPT>> blk_end_request_all(clone_rq) blk_update_request(clone_rq) bio_endio(clone_bio) == end_clone_bio blk_update_request(orig_rq) bio_endio(orig_bio) <<I/O completed>> dm_blk_close() dev_remove() dm_put(md) <<Free md>> blk_finish_request(clone_rq) .... dm_end_request(clone_rq) free_rq_clone(clone_rq) blk_end_request_all(orig_rq) rq_completed(md) So request-based dm used dm_get()/dm_put() to hold md for each I/O until its request completion handling is fully done. However, the final dm_put() can call the device deletion code which must not be run in interrupt context and may cause kernel panic. To solve the problem, this patch moves the device deletion code, dm_destroy(), to predetermined places that is actually deleting the mapped_device in ioctl (process) context, and changes dm_put() just to decrement the reference count of the mapped_device. By this change, dm_put() can be used in any context and the symmetric model below is introduced: dm_create(): create a mapped_device dm_destroy(): destroy a mapped_device dm_get(): increment the reference count of a mapped_device dm_put(): decrement the reference count of a mapped_device dm_destroy() waits for all references of the mapped_device to disappear, then deletes the mapped_device. dm_destroy() uses active waiting with msleep(1), since deleting the mapped_device isn't performance-critical task. And since at this point, nobody opens the mapped_device and no new reference will be taken, the pending counts are just for racing completing activity and will eventually decrease to zero. For the unlikely case of the forced module unload, dm_destroy_immediate(), which doesn't wait and forcibly deletes the mapped_device, is also introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f" may be stuck and never return. And now, because the mapped_device is deleted at this point, subsequent accesses to the mapped_device may cause NULL pointer references. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:13:56 +01:00
dm: separate device deletion from dm_put This patch separates the device deletion code from dm_put() to make sure the deletion happens in the process context. By this patch, device deletion always occurs in an ioctl (process) context and dm_put() can be called in interrupt context. As a result, the request-based dm's bad dm_put() usage pointed out by Mikulas below disappears. http://marc.info/?l=dm-devel&m=126699981019735&w=2 Without this patch, I confirmed there is a case to crash the system: dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt()) Some more backgrounds and details: In request-based dm, a device opener can remove a mapped_device while the last request is still completing, because bios in the last request complete first and then the device opener can close and remove the mapped_device before the last request completes: CPU0 CPU1 ================================================================= <<INTERRUPT>> blk_end_request_all(clone_rq) blk_update_request(clone_rq) bio_endio(clone_bio) == end_clone_bio blk_update_request(orig_rq) bio_endio(orig_bio) <<I/O completed>> dm_blk_close() dev_remove() dm_put(md) <<Free md>> blk_finish_request(clone_rq) .... dm_end_request(clone_rq) free_rq_clone(clone_rq) blk_end_request_all(orig_rq) rq_completed(md) So request-based dm used dm_get()/dm_put() to hold md for each I/O until its request completion handling is fully done. However, the final dm_put() can call the device deletion code which must not be run in interrupt context and may cause kernel panic. To solve the problem, this patch moves the device deletion code, dm_destroy(), to predetermined places that is actually deleting the mapped_device in ioctl (process) context, and changes dm_put() just to decrement the reference count of the mapped_device. By this change, dm_put() can be used in any context and the symmetric model below is introduced: dm_create(): create a mapped_device dm_destroy(): destroy a mapped_device dm_get(): increment the reference count of a mapped_device dm_put(): decrement the reference count of a mapped_device dm_destroy() waits for all references of the mapped_device to disappear, then deletes the mapped_device. dm_destroy() uses active waiting with msleep(1), since deleting the mapped_device isn't performance-critical task. And since at this point, nobody opens the mapped_device and no new reference will be taken, the pending counts are just for racing completing activity and will eventually decrease to zero. For the unlikely case of the forced module unload, dm_destroy_immediate(), which doesn't wait and forcibly deletes the mapped_device, is also introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f" may be stuck and never return. And now, because the mapped_device is deleted at this point, subsequent accesses to the mapped_device may cause NULL pointer references. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:13:56 +01:00
dm: report suspended device during destroy The function dm_suspended returns true if the target is suspended. However, when the target is being suspended during unload, it returns false. An example where this is a problem: the test "!dm_suspended(wc->ti)" in writecache_writeback is not sufficient, because dm_suspended returns zero while writecache_suspend is in progress. As is, without an enhanced dm_suspended, simply switching from flush_workqueue to drain_workqueue still emits warnings: workqueue writecache-writeback: drain_workqueue() isn't complete after 10 tries workqueue writecache-writeback: drain_workqueue() isn't complete after 100 tries workqueue writecache-writeback: drain_workqueue() isn't complete after 200 tries workqueue writecache-writeback: drain_workqueue() isn't complete after 300 tries workqueue writecache-writeback: drain_workqueue() isn't complete after 400 tries writecache_suspend calls flush_workqueue(wc->writeback_wq) - this function flushes the current work. However, the workqueue may re-queue itself and flush_workqueue doesn't wait for re-queued works to finish. Because of this - the function writecache_writeback continues execution after the device was suspended and then concurrently with writecache_dtr, causing a crash in writecache_writeback. We must use drain_workqueue - that waits until the work and all re-queued works finish. As a prereq for switching to drain_workqueue, this commit fixes dm_suspended to return true after the presuspend hook and before the postsuspend hook - just like during a normal suspend. It allows simplifying the dm-integrity and dm-writecache targets so that they don't have to maintain suspended flags on their own. With this change use of drain_workqueue() can be used effectively. This change was tested with the lvm2 testsuite and cryptsetup testsuite and the are no regressions. Fixes: 48debafe4f2f ("dm: add writecache target") Cc: stable@vger.kernel.org # 4.18+ Reported-by: Corey Marthaler <cmarthal@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-24 10:20:28 +01:00
dm: separate device deletion from dm_put This patch separates the device deletion code from dm_put() to make sure the deletion happens in the process context. By this patch, device deletion always occurs in an ioctl (process) context and dm_put() can be called in interrupt context. As a result, the request-based dm's bad dm_put() usage pointed out by Mikulas below disappears. http://marc.info/?l=dm-devel&m=126699981019735&w=2 Without this patch, I confirmed there is a case to crash the system: dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt()) Some more backgrounds and details: In request-based dm, a device opener can remove a mapped_device while the last request is still completing, because bios in the last request complete first and then the device opener can close and remove the mapped_device before the last request completes: CPU0 CPU1 ================================================================= <<INTERRUPT>> blk_end_request_all(clone_rq) blk_update_request(clone_rq) bio_endio(clone_bio) == end_clone_bio blk_update_request(orig_rq) bio_endio(orig_bio) <<I/O completed>> dm_blk_close() dev_remove() dm_put(md) <<Free md>> blk_finish_request(clone_rq) .... dm_end_request(clone_rq) free_rq_clone(clone_rq) blk_end_request_all(orig_rq) rq_completed(md) So request-based dm used dm_get()/dm_put() to hold md for each I/O until its request completion handling is fully done. However, the final dm_put() can call the device deletion code which must not be run in interrupt context and may cause kernel panic. To solve the problem, this patch moves the device deletion code, dm_destroy(), to predetermined places that is actually deleting the mapped_device in ioctl (process) context, and changes dm_put() just to decrement the reference count of the mapped_device. By this change, dm_put() can be used in any context and the symmetric model below is introduced: dm_create(): create a mapped_device dm_destroy(): destroy a mapped_device dm_get(): increment the reference count of a mapped_device dm_put(): decrement the reference count of a mapped_device dm_destroy() waits for all references of the mapped_device to disappear, then deletes the mapped_device. dm_destroy() uses active waiting with msleep(1), since deleting the mapped_device isn't performance-critical task. And since at this point, nobody opens the mapped_device and no new reference will be taken, the pending counts are just for racing completing activity and will eventually decrease to zero. For the unlikely case of the forced module unload, dm_destroy_immediate(), which doesn't wait and forcibly deletes the mapped_device, is also introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f" may be stuck and never return. And now, because the mapped_device is deleted at this point, subsequent accesses to the mapped_device may cause NULL pointer references. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:13:56 +01:00
dm: separate device deletion from dm_put This patch separates the device deletion code from dm_put() to make sure the deletion happens in the process context. By this patch, device deletion always occurs in an ioctl (process) context and dm_put() can be called in interrupt context. As a result, the request-based dm's bad dm_put() usage pointed out by Mikulas below disappears. http://marc.info/?l=dm-devel&m=126699981019735&w=2 Without this patch, I confirmed there is a case to crash the system: dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt()) Some more backgrounds and details: In request-based dm, a device opener can remove a mapped_device while the last request is still completing, because bios in the last request complete first and then the device opener can close and remove the mapped_device before the last request completes: CPU0 CPU1 ================================================================= <<INTERRUPT>> blk_end_request_all(clone_rq) blk_update_request(clone_rq) bio_endio(clone_bio) == end_clone_bio blk_update_request(orig_rq) bio_endio(orig_bio) <<I/O completed>> dm_blk_close() dev_remove() dm_put(md) <<Free md>> blk_finish_request(clone_rq) .... dm_end_request(clone_rq) free_rq_clone(clone_rq) blk_end_request_all(orig_rq) rq_completed(md) So request-based dm used dm_get()/dm_put() to hold md for each I/O until its request completion handling is fully done. However, the final dm_put() can call the device deletion code which must not be run in interrupt context and may cause kernel panic. To solve the problem, this patch moves the device deletion code, dm_destroy(), to predetermined places that is actually deleting the mapped_device in ioctl (process) context, and changes dm_put() just to decrement the reference count of the mapped_device. By this change, dm_put() can be used in any context and the symmetric model below is introduced: dm_create(): create a mapped_device dm_destroy(): destroy a mapped_device dm_get(): increment the reference count of a mapped_device dm_put(): decrement the reference count of a mapped_device dm_destroy() waits for all references of the mapped_device to disappear, then deletes the mapped_device. dm_destroy() uses active waiting with msleep(1), since deleting the mapped_device isn't performance-critical task. And since at this point, nobody opens the mapped_device and no new reference will be taken, the pending counts are just for racing completing activity and will eventually decrease to zero. For the unlikely case of the forced module unload, dm_destroy_immediate(), which doesn't wait and forcibly deletes the mapped_device, is also introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f" may be stuck and never return. And now, because the mapped_device is deleted at this point, subsequent accesses to the mapped_device may cause NULL pointer references. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:13:56 +01:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: prepare for request based option This patch adds core functions for request-based dm. When struct mapped device (md) is initialized, md->queue has an I/O scheduler and the following functions are used for request-based dm as the queue functions: make_request_fn: dm_make_request() pref_fn: dm_prep_fn() request_fn: dm_request_fn() softirq_done_fn: dm_softirq_done() lld_busy_fn: dm_lld_busy() Actual initializations are done in another patch (PATCH 2). Below is a brief summary of how request-based dm behaves, including: - making request from bio - cloning, mapping and dispatching request - completing request and bio - suspending md - resuming md bio to request ============== md->queue->make_request_fn() (dm_make_request()) calls __make_request() for a bio submitted to the md. Then, the bio is kept in the queue as a new request or merged into another request in the queue if possible. Cloning and Mapping =================== Cloning and mapping are done in md->queue->request_fn() (dm_request_fn()), when requests are dispatched after they are sorted by the I/O scheduler. dm_request_fn() checks busy state of underlying devices using target's busy() function and stops dispatching requests to keep them on the dm device's queue if busy. It helps better I/O merging, since no merge is done for a request once it is dispatched to underlying devices. Actual cloning and mapping are done in dm_prep_fn() and map_request() called from dm_request_fn(). dm_prep_fn() clones not only request but also bios of the request so that dm can hold bio completion in error cases and prevent the bio submitter from noticing the error. (See the "Completion" section below for details.) After the cloning, the clone is mapped by target's map_rq() function and inserted to underlying device's queue using blk_insert_cloned_request(). Completion ========== Request completion can be hooked by rq->end_io(), but then, all bios in the request will have been completed even error cases, and the bio submitter will have noticed the error. To prevent the bio completion in error cases, request-based dm clones both bio and request and hooks both bio->bi_end_io() and rq->end_io(): bio->bi_end_io(): end_clone_bio() rq->end_io(): end_clone_request() Summary of the request completion flow is below: blk_end_request() for a clone request => blk_update_request() => bio->bi_end_io() == end_clone_bio() for each clone bio => Free the clone bio => Success: Complete the original bio (blk_update_request()) Error: Don't complete the original bio => blk_finish_request() => rq->end_io() == end_clone_request() => blk_complete_request() => dm_softirq_done() => Free the clone request => Success: Complete the original request (blk_end_request()) Error: Requeue the original request end_clone_bio() completes the original request on the size of the original bio in successful cases. Even if all bios in the original request are completed by that completion, the original request must not be completed yet to keep the ordering of request completion for the stacking. So end_clone_bio() uses blk_update_request() instead of blk_end_request(). In error cases, end_clone_bio() doesn't complete the original bio. It just frees the cloned bio and gives over the error handling to end_clone_request(). end_clone_request(), which is called with queue lock held, completes the clone request and the original request in a softirq context (dm_softirq_done()), which has no queue lock, to avoid a deadlock issue on submission of another request during the completion: - The submitted request may be mapped to the same device - Request submission requires queue lock, but the queue lock has been held by itself and it doesn't know that The clone request has no clone bio when dm_softirq_done() is called. So target drivers can't resubmit it again even error cases. Instead, they can ask dm core for requeueing and remapping the original request in that cases. suspend ======= Request-based dm uses stopping md->queue as suspend of the md. For noflush suspend, just stops md->queue. For flush suspend, inserts a marker request to the tail of md->queue. And dispatches all requests in md->queue until the marker comes to the front of md->queue. Then, stops dispatching request and waits for the all dispatched requests to complete. After that, completes the marker request, stops md->queue and wake up the waiter on the suspend queue, md->wait. resume ====== Starts md->queue. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:35 +01:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
[PATCH] dm: suspend: add noflush pushback In device-mapper I/O is sometimes queued within targets for later processing. For example the multipath target can be configured to store I/O when no paths are available instead of returning it -EIO. This patch allows the device-mapper core to instruct a target to transfer the contents of any such in-target queue back into the core. This frees up the resources used by the target so the core can replace that target with an alternative one and then resend the I/O to it. Without this patch the only way to change the target in such circumstances involves returning the I/O with an error back to the filesystem/application. In the multipath case, this patch will let us add new paths for existing I/O to try after all the existing paths have failed. DMF_NOFLUSH_SUSPENDING ---------------------- If the DM_NOFLUSH_FLAG ioctl option is specified at suspend time, the DMF_NOFLUSH_SUSPENDING flag is set in md->flags during dm_suspend(). It is always cleared before dm_suspend() returns. The flag must be visible while the target is flushing pending I/Os so it is set before presuspend where the flush starts and unset after the wait for md->pending where the flush ends. Target drivers can check this flag by calling dm_noflush_suspending(). DM_MAPIO_REQUEUE / DM_ENDIO_REQUEUE ----------------------------------- A target's map() function can now return DM_MAPIO_REQUEUE to request the device mapper core queue the bio. Similarly, a target's end_io() function can return DM_ENDIO_REQUEUE to request the same. This has been labelled 'pushback'. The __map_bio() and clone_endio() functions in the core treat these return values as errors and call dec_pending() to end the I/O. dec_pending ----------- dec_pending() saves the pushback request in struct dm_io->error. Once all the split clones have ended, dec_pending() will put the original bio on the md->pushback list. Note that this supercedes any I/O errors. It is possible for the suspend with DM_NOFLUSH_FLAG to be aborted while in progress (e.g. by user interrupt). dec_pending() checks for this and returns -EIO if it happened. pushdback list and pushback_lock -------------------------------- The bio is queued on md->pushback temporarily in dec_pending(), and after all pending I/Os return, md->pushback is merged into md->deferred in dm_suspend() for re-issuing at resume time. md->pushback_lock protects md->pushback. The lock should be held with irq disabled because dec_pending() can be called from interrupt context. Queueing bios to md->pushback in dec_pending() must be done atomically with the check for DMF_NOFLUSH_SUSPENDING flag. So md->pushback_lock is held when checking the flag. Otherwise dec_pending() may queue a bio to md->pushback after the interrupted dm_suspend() flushes md->pushback. Then the bio would be left in md->pushback. Flag setting in dm_suspend() can be done without md->pushback_lock because the flag is checked only after presuspend and the set value is already made visible via the target's presuspend function. The flag can be checked without md->pushback_lock (e.g. the first part of the dec_pending() or target drivers), because the flag is checked again with md->pushback_lock held when the bio is really queued to md->pushback as described above. So even if the flag is cleared after the lockless checkings, the bio isn't left in md->pushback but returned to applications with -EIO. Other notes on the current patch -------------------------------- - md->pushback is added to the struct mapped_device instead of using md->deferred directly because md->io_lock which protects md->deferred is rw_semaphore and can't be used in interrupt context like dec_pending(), and md->io_lock protects the DMF_BLOCK_IO flag of md->flags too. - Don't issue lock_fs() in dm_suspend() if the DM_NOFLUSH_FLAG ioctl option is specified, because I/Os generated by lock_fs() would be pushed back and never return if there were no valid devices. - If an error occurs in dm_suspend() after the DMF_NOFLUSH_SUSPENDING flag is set, md->pushback must be flushed because I/Os may be queued to the list already. (flush_and_out label in dm_suspend()) Test results ------------ I have tested using multipath target with the next patch. The following tests are for regression/compatibility: - I/Os succeed when valid paths exist; - I/Os fail when there are no valid paths and queue_if_no_path is not set; - I/Os are queued in the multipath target when there are no valid paths and queue_if_no_path is set; - The queued I/Os above fail when suspend is issued without the DM_NOFLUSH_FLAG ioctl option. I/Os spanning 2 multipath targets also fail. The following tests are for the normal code path of new pushback feature: - Queued I/Os in the multipath target are flushed from the target but don't return when suspend is issued with the DM_NOFLUSH_FLAG ioctl option; - The I/Os above are queued in the multipath target again when resume is issued without path recovery; - The I/Os above succeed when resume is issued after path recovery or table load; - Queued I/Os in the multipath target succeed when resume is issued with the DM_NOFLUSH_FLAG ioctl option after table load. I/Os spanning 2 multipath targets also succeed. The following tests are for the error paths of the new pushback feature: - When the bdget_disk() fails in dm_suspend(), the DMF_NOFLUSH_SUSPENDING flag is cleared and I/Os already queued to the pushback list are flushed properly. - When suspend with the DM_NOFLUSH_FLAG ioctl option is interrupted, o I/Os which had already been queued to the pushback list at the time don't return, and are re-issued at resume time; o I/Os which hadn't been returned at the time return with EIO. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 02:41:09 -08:00
[PATCH] dm: suspend: add noflush pushback In device-mapper I/O is sometimes queued within targets for later processing. For example the multipath target can be configured to store I/O when no paths are available instead of returning it -EIO. This patch allows the device-mapper core to instruct a target to transfer the contents of any such in-target queue back into the core. This frees up the resources used by the target so the core can replace that target with an alternative one and then resend the I/O to it. Without this patch the only way to change the target in such circumstances involves returning the I/O with an error back to the filesystem/application. In the multipath case, this patch will let us add new paths for existing I/O to try after all the existing paths have failed. DMF_NOFLUSH_SUSPENDING ---------------------- If the DM_NOFLUSH_FLAG ioctl option is specified at suspend time, the DMF_NOFLUSH_SUSPENDING flag is set in md->flags during dm_suspend(). It is always cleared before dm_suspend() returns. The flag must be visible while the target is flushing pending I/Os so it is set before presuspend where the flush starts and unset after the wait for md->pending where the flush ends. Target drivers can check this flag by calling dm_noflush_suspending(). DM_MAPIO_REQUEUE / DM_ENDIO_REQUEUE ----------------------------------- A target's map() function can now return DM_MAPIO_REQUEUE to request the device mapper core queue the bio. Similarly, a target's end_io() function can return DM_ENDIO_REQUEUE to request the same. This has been labelled 'pushback'. The __map_bio() and clone_endio() functions in the core treat these return values as errors and call dec_pending() to end the I/O. dec_pending ----------- dec_pending() saves the pushback request in struct dm_io->error. Once all the split clones have ended, dec_pending() will put the original bio on the md->pushback list. Note that this supercedes any I/O errors. It is possible for the suspend with DM_NOFLUSH_FLAG to be aborted while in progress (e.g. by user interrupt). dec_pending() checks for this and returns -EIO if it happened. pushdback list and pushback_lock -------------------------------- The bio is queued on md->pushback temporarily in dec_pending(), and after all pending I/Os return, md->pushback is merged into md->deferred in dm_suspend() for re-issuing at resume time. md->pushback_lock protects md->pushback. The lock should be held with irq disabled because dec_pending() can be called from interrupt context. Queueing bios to md->pushback in dec_pending() must be done atomically with the check for DMF_NOFLUSH_SUSPENDING flag. So md->pushback_lock is held when checking the flag. Otherwise dec_pending() may queue a bio to md->pushback after the interrupted dm_suspend() flushes md->pushback. Then the bio would be left in md->pushback. Flag setting in dm_suspend() can be done without md->pushback_lock because the flag is checked only after presuspend and the set value is already made visible via the target's presuspend function. The flag can be checked without md->pushback_lock (e.g. the first part of the dec_pending() or target drivers), because the flag is checked again with md->pushback_lock held when the bio is really queued to md->pushback as described above. So even if the flag is cleared after the lockless checkings, the bio isn't left in md->pushback but returned to applications with -EIO. Other notes on the current patch -------------------------------- - md->pushback is added to the struct mapped_device instead of using md->deferred directly because md->io_lock which protects md->deferred is rw_semaphore and can't be used in interrupt context like dec_pending(), and md->io_lock protects the DMF_BLOCK_IO flag of md->flags too. - Don't issue lock_fs() in dm_suspend() if the DM_NOFLUSH_FLAG ioctl option is specified, because I/Os generated by lock_fs() would be pushed back and never return if there were no valid devices. - If an error occurs in dm_suspend() after the DMF_NOFLUSH_SUSPENDING flag is set, md->pushback must be flushed because I/Os may be queued to the list already. (flush_and_out label in dm_suspend()) Test results ------------ I have tested using multipath target with the next patch. The following tests are for regression/compatibility: - I/Os succeed when valid paths exist; - I/Os fail when there are no valid paths and queue_if_no_path is not set; - I/Os are queued in the multipath target when there are no valid paths and queue_if_no_path is set; - The queued I/Os above fail when suspend is issued without the DM_NOFLUSH_FLAG ioctl option. I/Os spanning 2 multipath targets also fail. The following tests are for the normal code path of new pushback feature: - Queued I/Os in the multipath target are flushed from the target but don't return when suspend is issued with the DM_NOFLUSH_FLAG ioctl option; - The I/Os above are queued in the multipath target again when resume is issued without path recovery; - The I/Os above succeed when resume is issued after path recovery or table load; - Queued I/Os in the multipath target succeed when resume is issued with the DM_NOFLUSH_FLAG ioctl option after table load. I/Os spanning 2 multipath targets also succeed. The following tests are for the error paths of the new pushback feature: - When the bdget_disk() fails in dm_suspend(), the DMF_NOFLUSH_SUSPENDING flag is cleared and I/Os already queued to the pushback list are flushed properly. - When suspend with the DM_NOFLUSH_FLAG ioctl option is interrupted, o I/Os which had already been queued to the pushback list at the time don't return, and are re-issued at resume time; o I/Os which hadn't been returned at the time return with EIO. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 02:41:09 -08:00
dm: simplify request based suspend The semantics of bio-based dm were changed recently in the case of suspend with "--nolockfs" but without "--noflush". Before 2.6.30, I/Os submitted before the suspend invocation were always flushed. From 2.6.30 onwards, I/Os submitted before the suspend invocation might not be flushed. (For details, see http://marc.info/?t=123994433400003&r=1&w=2) This patch brings the behaviour of request-based dm into line with bio-based dm, simplifying the code and preparing for a subsequent patch that will wait for all in_flight I/Os to complete without stopping request_queue and use dm_wait_for_completion() for it. This change in semantics simplifies the suspend code as follows: o Suspend is implemented as stopping request_queue in request-based dm, and all I/Os are queued in the request_queue even after suspend is invoked. o In the old semantics, we had to track whether I/Os were queued before or after the suspend invocation, so a special barrier-like request called 'suspend marker' was introduced. o With the new semantics, we don't need to flush any I/O so we can remove the marker and the code related to the marker handling and I/O flushing. After removing this codes, the suspend sequence is now: 1. Flush all I/Os by lock_fs() if needed. 2. Stop dispatching any I/O by stopping the request_queue. 3. Wait for all in-flight I/Os to be completed or requeued. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:16 +00:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: relax ordering of bio-based flush implementation Unlike REQ_HARDBARRIER, REQ_FLUSH/FUA doesn't mandate any ordering against other bio's. This patch relaxes ordering around flushes. * A flush bio is no longer deferred to workqueue directly. It's processed like other bio's but __split_and_process_bio() uses md->flush_bio as the clone source. md->flush_bio is initialized to empty flush during md initialization and shared for all flushes. * As a flush bio now travels through the same execution path as other bio's, there's no need for dedicated error handling path either. It can use the same error handling path in dec_pending(). Dedicated error handling removed along with md->flush_error. * When dec_pending() detects that a flush has completed, it checks whether the original bio has data. If so, the bio is queued to the deferred list w/ REQ_FLUSH cleared; otherwise, it's completed. * As flush sequencing is handled in the usual issue/completion path, dm_wq_work() no longer needs to handle flushes differently. Now its only responsibility is re-issuing deferred bio's the same way as _dm_request() would. REQ_FLUSH handling logic including process_flush() is dropped. * There's no reason for queue_io() and dm_wq_work() write lock dm->io_lock. queue_io() now only uses md->deferred_lock and dm_wq_work() read locks dm->io_lock. * bio's no longer need to be queued on the deferred list while a flush is in progress making DMF_QUEUE_IO_TO_THREAD unncessary. Drop it. This avoids stalling the device during flushes and simplifies the implementation. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-08 18:07:00 +02:00
dm: add request based barrier support This patch adds barrier support for request-based dm. CORE DESIGN The design is basically same as bio-based dm, which emulates barrier by mapping empty barrier bios before/after a barrier I/O. But request-based dm has been using struct request_queue for I/O queueing, so the block-layer's barrier mechanism can be used. o Summary of the block-layer's behavior (which is depended by dm-core) Request-based dm uses QUEUE_ORDERED_DRAIN_FLUSH ordered mode for I/O barrier. It means that when an I/O requiring barrier is found in the request_queue, the block-layer makes pre-flush request and post-flush request just before and just after the I/O respectively. After the ordered sequence starts, the block-layer waits for all in-flight I/Os to complete, then gives drivers the pre-flush request, the barrier I/O and the post-flush request one by one. It means that the request_queue is stopped automatically by the block-layer until drivers complete each sequence. o dm-core For the barrier I/O, treats it as a normal I/O, so no additional code is needed. For the pre/post-flush request, flushes caches by the followings: 1. Make the number of empty barrier requests required by target's num_flush_requests, and map them (dm_rq_barrier()). 2. Waits for the mapped barriers to complete (dm_rq_barrier()). If error has occurred, save the error value to md->barrier_error (dm_end_request()). (*) Basically, the first reported error is taken. But -EOPNOTSUPP supersedes any error and DM_ENDIO_REQUEUE follows. 3. Requeue the pre/post-flush request if the error value is DM_ENDIO_REQUEUE. Otherwise, completes with the error value (dm_rq_barrier_work()). The pre/post-flush work above is done in the kernel thread (kdmflush) context, since memory allocation which might sleep is needed in dm_rq_barrier() but sleep is not allowed in dm_request_fn(), which is an irq-disabled context. Also, clones of the pre/post-flush request share an original, so such clones can't be completed using the softirq context. Instead, complete them in the context of underlying device drivers. It should be safe since there is no I/O dispatching during the completion of such clones. For suspend, the workqueue of kdmflush needs to be flushed after the request_queue has been stopped. Otherwise, the next flush work can be kicked even after the suspend completes. TARGET INTERFACE No new interface is added. Just use the existing num_flush_requests in struct target_type as same as bio-based dm. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:18 +00:00
dm: add request based barrier support This patch adds barrier support for request-based dm. CORE DESIGN The design is basically same as bio-based dm, which emulates barrier by mapping empty barrier bios before/after a barrier I/O. But request-based dm has been using struct request_queue for I/O queueing, so the block-layer's barrier mechanism can be used. o Summary of the block-layer's behavior (which is depended by dm-core) Request-based dm uses QUEUE_ORDERED_DRAIN_FLUSH ordered mode for I/O barrier. It means that when an I/O requiring barrier is found in the request_queue, the block-layer makes pre-flush request and post-flush request just before and just after the I/O respectively. After the ordered sequence starts, the block-layer waits for all in-flight I/Os to complete, then gives drivers the pre-flush request, the barrier I/O and the post-flush request one by one. It means that the request_queue is stopped automatically by the block-layer until drivers complete each sequence. o dm-core For the barrier I/O, treats it as a normal I/O, so no additional code is needed. For the pre/post-flush request, flushes caches by the followings: 1. Make the number of empty barrier requests required by target's num_flush_requests, and map them (dm_rq_barrier()). 2. Waits for the mapped barriers to complete (dm_rq_barrier()). If error has occurred, save the error value to md->barrier_error (dm_end_request()). (*) Basically, the first reported error is taken. But -EOPNOTSUPP supersedes any error and DM_ENDIO_REQUEUE follows. 3. Requeue the pre/post-flush request if the error value is DM_ENDIO_REQUEUE. Otherwise, completes with the error value (dm_rq_barrier_work()). The pre/post-flush work above is done in the kernel thread (kdmflush) context, since memory allocation which might sleep is needed in dm_rq_barrier() but sleep is not allowed in dm_request_fn(), which is an irq-disabled context. Also, clones of the pre/post-flush request share an original, so such clones can't be completed using the softirq context. Instead, complete them in the context of underlying device drivers. It should be safe since there is no I/O dispatching during the completion of such clones. For suspend, the workqueue of kdmflush needs to be flushed after the request_queue has been stopped. Otherwise, the next flush work can be kicked even after the suspend completes. TARGET INTERFACE No new interface is added. Just use the existing num_flush_requests in struct target_type as same as bio-based dm. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:18 +00:00
dm: prepare for request based option This patch adds core functions for request-based dm. When struct mapped device (md) is initialized, md->queue has an I/O scheduler and the following functions are used for request-based dm as the queue functions: make_request_fn: dm_make_request() pref_fn: dm_prep_fn() request_fn: dm_request_fn() softirq_done_fn: dm_softirq_done() lld_busy_fn: dm_lld_busy() Actual initializations are done in another patch (PATCH 2). Below is a brief summary of how request-based dm behaves, including: - making request from bio - cloning, mapping and dispatching request - completing request and bio - suspending md - resuming md bio to request ============== md->queue->make_request_fn() (dm_make_request()) calls __make_request() for a bio submitted to the md. Then, the bio is kept in the queue as a new request or merged into another request in the queue if possible. Cloning and Mapping =================== Cloning and mapping are done in md->queue->request_fn() (dm_request_fn()), when requests are dispatched after they are sorted by the I/O scheduler. dm_request_fn() checks busy state of underlying devices using target's busy() function and stops dispatching requests to keep them on the dm device's queue if busy. It helps better I/O merging, since no merge is done for a request once it is dispatched to underlying devices. Actual cloning and mapping are done in dm_prep_fn() and map_request() called from dm_request_fn(). dm_prep_fn() clones not only request but also bios of the request so that dm can hold bio completion in error cases and prevent the bio submitter from noticing the error. (See the "Completion" section below for details.) After the cloning, the clone is mapped by target's map_rq() function and inserted to underlying device's queue using blk_insert_cloned_request(). Completion ========== Request completion can be hooked by rq->end_io(), but then, all bios in the request will have been completed even error cases, and the bio submitter will have noticed the error. To prevent the bio completion in error cases, request-based dm clones both bio and request and hooks both bio->bi_end_io() and rq->end_io(): bio->bi_end_io(): end_clone_bio() rq->end_io(): end_clone_request() Summary of the request completion flow is below: blk_end_request() for a clone request => blk_update_request() => bio->bi_end_io() == end_clone_bio() for each clone bio => Free the clone bio => Success: Complete the original bio (blk_update_request()) Error: Don't complete the original bio => blk_finish_request() => rq->end_io() == end_clone_request() => blk_complete_request() => dm_softirq_done() => Free the clone request => Success: Complete the original request (blk_end_request()) Error: Requeue the original request end_clone_bio() completes the original request on the size of the original bio in successful cases. Even if all bios in the original request are completed by that completion, the original request must not be completed yet to keep the ordering of request completion for the stacking. So end_clone_bio() uses blk_update_request() instead of blk_end_request(). In error cases, end_clone_bio() doesn't complete the original bio. It just frees the cloned bio and gives over the error handling to end_clone_request(). end_clone_request(), which is called with queue lock held, completes the clone request and the original request in a softirq context (dm_softirq_done()), which has no queue lock, to avoid a deadlock issue on submission of another request during the completion: - The submitted request may be mapped to the same device - Request submission requires queue lock, but the queue lock has been held by itself and it doesn't know that The clone request has no clone bio when dm_softirq_done() is called. So target drivers can't resubmit it again even error cases. Instead, they can ask dm core for requeueing and remapping the original request in that cases. suspend ======= Request-based dm uses stopping md->queue as suspend of the md. For noflush suspend, just stops md->queue. For flush suspend, inserts a marker request to the tail of md->queue. And dispatches all requests in md->queue until the marker comes to the front of md->queue. Then, stops dispatching request and waits for the all dispatched requests to complete. After that, completes the marker request, stops md->queue and wake up the waiter on the suspend queue, md->wait. resume ====== Starts md->queue. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:35 +01:00
dm: add request based barrier support This patch adds barrier support for request-based dm. CORE DESIGN The design is basically same as bio-based dm, which emulates barrier by mapping empty barrier bios before/after a barrier I/O. But request-based dm has been using struct request_queue for I/O queueing, so the block-layer's barrier mechanism can be used. o Summary of the block-layer's behavior (which is depended by dm-core) Request-based dm uses QUEUE_ORDERED_DRAIN_FLUSH ordered mode for I/O barrier. It means that when an I/O requiring barrier is found in the request_queue, the block-layer makes pre-flush request and post-flush request just before and just after the I/O respectively. After the ordered sequence starts, the block-layer waits for all in-flight I/Os to complete, then gives drivers the pre-flush request, the barrier I/O and the post-flush request one by one. It means that the request_queue is stopped automatically by the block-layer until drivers complete each sequence. o dm-core For the barrier I/O, treats it as a normal I/O, so no additional code is needed. For the pre/post-flush request, flushes caches by the followings: 1. Make the number of empty barrier requests required by target's num_flush_requests, and map them (dm_rq_barrier()). 2. Waits for the mapped barriers to complete (dm_rq_barrier()). If error has occurred, save the error value to md->barrier_error (dm_end_request()). (*) Basically, the first reported error is taken. But -EOPNOTSUPP supersedes any error and DM_ENDIO_REQUEUE follows. 3. Requeue the pre/post-flush request if the error value is DM_ENDIO_REQUEUE. Otherwise, completes with the error value (dm_rq_barrier_work()). The pre/post-flush work above is done in the kernel thread (kdmflush) context, since memory allocation which might sleep is needed in dm_rq_barrier() but sleep is not allowed in dm_request_fn(), which is an irq-disabled context. Also, clones of the pre/post-flush request share an original, so such clones can't be completed using the softirq context. Instead, complete them in the context of underlying device drivers. It should be safe since there is no I/O dispatching during the completion of such clones. For suspend, the workqueue of kdmflush needs to be flushed after the request_queue has been stopped. Otherwise, the next flush work can be kicked even after the suspend completes. TARGET INTERFACE No new interface is added. Just use the existing num_flush_requests in struct target_type as same as bio-based dm. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:18 +00:00
[PATCH] dm: suspend: add noflush pushback In device-mapper I/O is sometimes queued within targets for later processing. For example the multipath target can be configured to store I/O when no paths are available instead of returning it -EIO. This patch allows the device-mapper core to instruct a target to transfer the contents of any such in-target queue back into the core. This frees up the resources used by the target so the core can replace that target with an alternative one and then resend the I/O to it. Without this patch the only way to change the target in such circumstances involves returning the I/O with an error back to the filesystem/application. In the multipath case, this patch will let us add new paths for existing I/O to try after all the existing paths have failed. DMF_NOFLUSH_SUSPENDING ---------------------- If the DM_NOFLUSH_FLAG ioctl option is specified at suspend time, the DMF_NOFLUSH_SUSPENDING flag is set in md->flags during dm_suspend(). It is always cleared before dm_suspend() returns. The flag must be visible while the target is flushing pending I/Os so it is set before presuspend where the flush starts and unset after the wait for md->pending where the flush ends. Target drivers can check this flag by calling dm_noflush_suspending(). DM_MAPIO_REQUEUE / DM_ENDIO_REQUEUE ----------------------------------- A target's map() function can now return DM_MAPIO_REQUEUE to request the device mapper core queue the bio. Similarly, a target's end_io() function can return DM_ENDIO_REQUEUE to request the same. This has been labelled 'pushback'. The __map_bio() and clone_endio() functions in the core treat these return values as errors and call dec_pending() to end the I/O. dec_pending ----------- dec_pending() saves the pushback request in struct dm_io->error. Once all the split clones have ended, dec_pending() will put the original bio on the md->pushback list. Note that this supercedes any I/O errors. It is possible for the suspend with DM_NOFLUSH_FLAG to be aborted while in progress (e.g. by user interrupt). dec_pending() checks for this and returns -EIO if it happened. pushdback list and pushback_lock -------------------------------- The bio is queued on md->pushback temporarily in dec_pending(), and after all pending I/Os return, md->pushback is merged into md->deferred in dm_suspend() for re-issuing at resume time. md->pushback_lock protects md->pushback. The lock should be held with irq disabled because dec_pending() can be called from interrupt context. Queueing bios to md->pushback in dec_pending() must be done atomically with the check for DMF_NOFLUSH_SUSPENDING flag. So md->pushback_lock is held when checking the flag. Otherwise dec_pending() may queue a bio to md->pushback after the interrupted dm_suspend() flushes md->pushback. Then the bio would be left in md->pushback. Flag setting in dm_suspend() can be done without md->pushback_lock because the flag is checked only after presuspend and the set value is already made visible via the target's presuspend function. The flag can be checked without md->pushback_lock (e.g. the first part of the dec_pending() or target drivers), because the flag is checked again with md->pushback_lock held when the bio is really queued to md->pushback as described above. So even if the flag is cleared after the lockless checkings, the bio isn't left in md->pushback but returned to applications with -EIO. Other notes on the current patch -------------------------------- - md->pushback is added to the struct mapped_device instead of using md->deferred directly because md->io_lock which protects md->deferred is rw_semaphore and can't be used in interrupt context like dec_pending(), and md->io_lock protects the DMF_BLOCK_IO flag of md->flags too. - Don't issue lock_fs() in dm_suspend() if the DM_NOFLUSH_FLAG ioctl option is specified, because I/Os generated by lock_fs() would be pushed back and never return if there were no valid devices. - If an error occurs in dm_suspend() after the DMF_NOFLUSH_SUSPENDING flag is set, md->pushback must be flushed because I/Os may be queued to the list already. (flush_and_out label in dm_suspend()) Test results ------------ I have tested using multipath target with the next patch. The following tests are for regression/compatibility: - I/Os succeed when valid paths exist; - I/Os fail when there are no valid paths and queue_if_no_path is not set; - I/Os are queued in the multipath target when there are no valid paths and queue_if_no_path is set; - The queued I/Os above fail when suspend is issued without the DM_NOFLUSH_FLAG ioctl option. I/Os spanning 2 multipath targets also fail. The following tests are for the normal code path of new pushback feature: - Queued I/Os in the multipath target are flushed from the target but don't return when suspend is issued with the DM_NOFLUSH_FLAG ioctl option; - The I/Os above are queued in the multipath target again when resume is issued without path recovery; - The I/Os above succeed when resume is issued after path recovery or table load; - Queued I/Os in the multipath target succeed when resume is issued with the DM_NOFLUSH_FLAG ioctl option after table load. I/Os spanning 2 multipath targets also succeed. The following tests are for the error paths of the new pushback feature: - When the bdget_disk() fails in dm_suspend(), the DMF_NOFLUSH_SUSPENDING flag is cleared and I/Os already queued to the pushback list are flushed properly. - When suspend with the DM_NOFLUSH_FLAG ioctl option is interrupted, o I/Os which had already been queued to the pushback list at the time don't return, and are re-issued at resume time; o I/Os which hadn't been returned at the time return with EIO. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 02:41:09 -08:00
dm: prepare for request based option This patch adds core functions for request-based dm. When struct mapped device (md) is initialized, md->queue has an I/O scheduler and the following functions are used for request-based dm as the queue functions: make_request_fn: dm_make_request() pref_fn: dm_prep_fn() request_fn: dm_request_fn() softirq_done_fn: dm_softirq_done() lld_busy_fn: dm_lld_busy() Actual initializations are done in another patch (PATCH 2). Below is a brief summary of how request-based dm behaves, including: - making request from bio - cloning, mapping and dispatching request - completing request and bio - suspending md - resuming md bio to request ============== md->queue->make_request_fn() (dm_make_request()) calls __make_request() for a bio submitted to the md. Then, the bio is kept in the queue as a new request or merged into another request in the queue if possible. Cloning and Mapping =================== Cloning and mapping are done in md->queue->request_fn() (dm_request_fn()), when requests are dispatched after they are sorted by the I/O scheduler. dm_request_fn() checks busy state of underlying devices using target's busy() function and stops dispatching requests to keep them on the dm device's queue if busy. It helps better I/O merging, since no merge is done for a request once it is dispatched to underlying devices. Actual cloning and mapping are done in dm_prep_fn() and map_request() called from dm_request_fn(). dm_prep_fn() clones not only request but also bios of the request so that dm can hold bio completion in error cases and prevent the bio submitter from noticing the error. (See the "Completion" section below for details.) After the cloning, the clone is mapped by target's map_rq() function and inserted to underlying device's queue using blk_insert_cloned_request(). Completion ========== Request completion can be hooked by rq->end_io(), but then, all bios in the request will have been completed even error cases, and the bio submitter will have noticed the error. To prevent the bio completion in error cases, request-based dm clones both bio and request and hooks both bio->bi_end_io() and rq->end_io(): bio->bi_end_io(): end_clone_bio() rq->end_io(): end_clone_request() Summary of the request completion flow is below: blk_end_request() for a clone request => blk_update_request() => bio->bi_end_io() == end_clone_bio() for each clone bio => Free the clone bio => Success: Complete the original bio (blk_update_request()) Error: Don't complete the original bio => blk_finish_request() => rq->end_io() == end_clone_request() => blk_complete_request() => dm_softirq_done() => Free the clone request => Success: Complete the original request (blk_end_request()) Error: Requeue the original request end_clone_bio() completes the original request on the size of the original bio in successful cases. Even if all bios in the original request are completed by that completion, the original request must not be completed yet to keep the ordering of request completion for the stacking. So end_clone_bio() uses blk_update_request() instead of blk_end_request(). In error cases, end_clone_bio() doesn't complete the original bio. It just frees the cloned bio and gives over the error handling to end_clone_request(). end_clone_request(), which is called with queue lock held, completes the clone request and the original request in a softirq context (dm_softirq_done()), which has no queue lock, to avoid a deadlock issue on submission of another request during the completion: - The submitted request may be mapped to the same device - Request submission requires queue lock, but the queue lock has been held by itself and it doesn't know that The clone request has no clone bio when dm_softirq_done() is called. So target drivers can't resubmit it again even error cases. Instead, they can ask dm core for requeueing and remapping the original request in that cases. suspend ======= Request-based dm uses stopping md->queue as suspend of the md. For noflush suspend, just stops md->queue. For flush suspend, inserts a marker request to the tail of md->queue. And dispatches all requests in md->queue until the marker comes to the front of md->queue. Then, stops dispatching request and waits for the all dispatched requests to complete. After that, completes the marker request, stops md->queue and wake up the waiter on the suspend queue, md->wait. resume ====== Starts md->queue. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:35 +01:00
dm: prepare for request based option This patch adds core functions for request-based dm. When struct mapped device (md) is initialized, md->queue has an I/O scheduler and the following functions are used for request-based dm as the queue functions: make_request_fn: dm_make_request() pref_fn: dm_prep_fn() request_fn: dm_request_fn() softirq_done_fn: dm_softirq_done() lld_busy_fn: dm_lld_busy() Actual initializations are done in another patch (PATCH 2). Below is a brief summary of how request-based dm behaves, including: - making request from bio - cloning, mapping and dispatching request - completing request and bio - suspending md - resuming md bio to request ============== md->queue->make_request_fn() (dm_make_request()) calls __make_request() for a bio submitted to the md. Then, the bio is kept in the queue as a new request or merged into another request in the queue if possible. Cloning and Mapping =================== Cloning and mapping are done in md->queue->request_fn() (dm_request_fn()), when requests are dispatched after they are sorted by the I/O scheduler. dm_request_fn() checks busy state of underlying devices using target's busy() function and stops dispatching requests to keep them on the dm device's queue if busy. It helps better I/O merging, since no merge is done for a request once it is dispatched to underlying devices. Actual cloning and mapping are done in dm_prep_fn() and map_request() called from dm_request_fn(). dm_prep_fn() clones not only request but also bios of the request so that dm can hold bio completion in error cases and prevent the bio submitter from noticing the error. (See the "Completion" section below for details.) After the cloning, the clone is mapped by target's map_rq() function and inserted to underlying device's queue using blk_insert_cloned_request(). Completion ========== Request completion can be hooked by rq->end_io(), but then, all bios in the request will have been completed even error cases, and the bio submitter will have noticed the error. To prevent the bio completion in error cases, request-based dm clones both bio and request and hooks both bio->bi_end_io() and rq->end_io(): bio->bi_end_io(): end_clone_bio() rq->end_io(): end_clone_request() Summary of the request completion flow is below: blk_end_request() for a clone request => blk_update_request() => bio->bi_end_io() == end_clone_bio() for each clone bio => Free the clone bio => Success: Complete the original bio (blk_update_request()) Error: Don't complete the original bio => blk_finish_request() => rq->end_io() == end_clone_request() => blk_complete_request() => dm_softirq_done() => Free the clone request => Success: Complete the original request (blk_end_request()) Error: Requeue the original request end_clone_bio() completes the original request on the size of the original bio in successful cases. Even if all bios in the original request are completed by that completion, the original request must not be completed yet to keep the ordering of request completion for the stacking. So end_clone_bio() uses blk_update_request() instead of blk_end_request(). In error cases, end_clone_bio() doesn't complete the original bio. It just frees the cloned bio and gives over the error handling to end_clone_request(). end_clone_request(), which is called with queue lock held, completes the clone request and the original request in a softirq context (dm_softirq_done()), which has no queue lock, to avoid a deadlock issue on submission of another request during the completion: - The submitted request may be mapped to the same device - Request submission requires queue lock, but the queue lock has been held by itself and it doesn't know that The clone request has no clone bio when dm_softirq_done() is called. So target drivers can't resubmit it again even error cases. Instead, they can ask dm core for requeueing and remapping the original request in that cases. suspend ======= Request-based dm uses stopping md->queue as suspend of the md. For noflush suspend, just stops md->queue. For flush suspend, inserts a marker request to the tail of md->queue. And dispatches all requests in md->queue until the marker comes to the front of md->queue. Then, stops dispatching request and waits for the all dispatched requests to complete. After that, completes the marker request, stops md->queue and wake up the waiter on the suspend queue, md->wait. resume ====== Starts md->queue. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:35 +01:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: prepare for request based option This patch adds core functions for request-based dm. When struct mapped device (md) is initialized, md->queue has an I/O scheduler and the following functions are used for request-based dm as the queue functions: make_request_fn: dm_make_request() pref_fn: dm_prep_fn() request_fn: dm_request_fn() softirq_done_fn: dm_softirq_done() lld_busy_fn: dm_lld_busy() Actual initializations are done in another patch (PATCH 2). Below is a brief summary of how request-based dm behaves, including: - making request from bio - cloning, mapping and dispatching request - completing request and bio - suspending md - resuming md bio to request ============== md->queue->make_request_fn() (dm_make_request()) calls __make_request() for a bio submitted to the md. Then, the bio is kept in the queue as a new request or merged into another request in the queue if possible. Cloning and Mapping =================== Cloning and mapping are done in md->queue->request_fn() (dm_request_fn()), when requests are dispatched after they are sorted by the I/O scheduler. dm_request_fn() checks busy state of underlying devices using target's busy() function and stops dispatching requests to keep them on the dm device's queue if busy. It helps better I/O merging, since no merge is done for a request once it is dispatched to underlying devices. Actual cloning and mapping are done in dm_prep_fn() and map_request() called from dm_request_fn(). dm_prep_fn() clones not only request but also bios of the request so that dm can hold bio completion in error cases and prevent the bio submitter from noticing the error. (See the "Completion" section below for details.) After the cloning, the clone is mapped by target's map_rq() function and inserted to underlying device's queue using blk_insert_cloned_request(). Completion ========== Request completion can be hooked by rq->end_io(), but then, all bios in the request will have been completed even error cases, and the bio submitter will have noticed the error. To prevent the bio completion in error cases, request-based dm clones both bio and request and hooks both bio->bi_end_io() and rq->end_io(): bio->bi_end_io(): end_clone_bio() rq->end_io(): end_clone_request() Summary of the request completion flow is below: blk_end_request() for a clone request => blk_update_request() => bio->bi_end_io() == end_clone_bio() for each clone bio => Free the clone bio => Success: Complete the original bio (blk_update_request()) Error: Don't complete the original bio => blk_finish_request() => rq->end_io() == end_clone_request() => blk_complete_request() => dm_softirq_done() => Free the clone request => Success: Complete the original request (blk_end_request()) Error: Requeue the original request end_clone_bio() completes the original request on the size of the original bio in successful cases. Even if all bios in the original request are completed by that completion, the original request must not be completed yet to keep the ordering of request completion for the stacking. So end_clone_bio() uses blk_update_request() instead of blk_end_request(). In error cases, end_clone_bio() doesn't complete the original bio. It just frees the cloned bio and gives over the error handling to end_clone_request(). end_clone_request(), which is called with queue lock held, completes the clone request and the original request in a softirq context (dm_softirq_done()), which has no queue lock, to avoid a deadlock issue on submission of another request during the completion: - The submitted request may be mapped to the same device - Request submission requires queue lock, but the queue lock has been held by itself and it doesn't know that The clone request has no clone bio when dm_softirq_done() is called. So target drivers can't resubmit it again even error cases. Instead, they can ask dm core for requeueing and remapping the original request in that cases. suspend ======= Request-based dm uses stopping md->queue as suspend of the md. For noflush suspend, just stops md->queue. For flush suspend, inserts a marker request to the tail of md->queue. And dispatches all requests in md->queue until the marker comes to the front of md->queue. Then, stops dispatching request and waits for the all dispatched requests to complete. After that, completes the marker request, stops md->queue and wake up the waiter on the suspend queue, md->wait. resume ====== Starts md->queue. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:35 +01:00
dm: prepare for request based option This patch adds core functions for request-based dm. When struct mapped device (md) is initialized, md->queue has an I/O scheduler and the following functions are used for request-based dm as the queue functions: make_request_fn: dm_make_request() pref_fn: dm_prep_fn() request_fn: dm_request_fn() softirq_done_fn: dm_softirq_done() lld_busy_fn: dm_lld_busy() Actual initializations are done in another patch (PATCH 2). Below is a brief summary of how request-based dm behaves, including: - making request from bio - cloning, mapping and dispatching request - completing request and bio - suspending md - resuming md bio to request ============== md->queue->make_request_fn() (dm_make_request()) calls __make_request() for a bio submitted to the md. Then, the bio is kept in the queue as a new request or merged into another request in the queue if possible. Cloning and Mapping =================== Cloning and mapping are done in md->queue->request_fn() (dm_request_fn()), when requests are dispatched after they are sorted by the I/O scheduler. dm_request_fn() checks busy state of underlying devices using target's busy() function and stops dispatching requests to keep them on the dm device's queue if busy. It helps better I/O merging, since no merge is done for a request once it is dispatched to underlying devices. Actual cloning and mapping are done in dm_prep_fn() and map_request() called from dm_request_fn(). dm_prep_fn() clones not only request but also bios of the request so that dm can hold bio completion in error cases and prevent the bio submitter from noticing the error. (See the "Completion" section below for details.) After the cloning, the clone is mapped by target's map_rq() function and inserted to underlying device's queue using blk_insert_cloned_request(). Completion ========== Request completion can be hooked by rq->end_io(), but then, all bios in the request will have been completed even error cases, and the bio submitter will have noticed the error. To prevent the bio completion in error cases, request-based dm clones both bio and request and hooks both bio->bi_end_io() and rq->end_io(): bio->bi_end_io(): end_clone_bio() rq->end_io(): end_clone_request() Summary of the request completion flow is below: blk_end_request() for a clone request => blk_update_request() => bio->bi_end_io() == end_clone_bio() for each clone bio => Free the clone bio => Success: Complete the original bio (blk_update_request()) Error: Don't complete the original bio => blk_finish_request() => rq->end_io() == end_clone_request() => blk_complete_request() => dm_softirq_done() => Free the clone request => Success: Complete the original request (blk_end_request()) Error: Requeue the original request end_clone_bio() completes the original request on the size of the original bio in successful cases. Even if all bios in the original request are completed by that completion, the original request must not be completed yet to keep the ordering of request completion for the stacking. So end_clone_bio() uses blk_update_request() instead of blk_end_request(). In error cases, end_clone_bio() doesn't complete the original bio. It just frees the cloned bio and gives over the error handling to end_clone_request(). end_clone_request(), which is called with queue lock held, completes the clone request and the original request in a softirq context (dm_softirq_done()), which has no queue lock, to avoid a deadlock issue on submission of another request during the completion: - The submitted request may be mapped to the same device - Request submission requires queue lock, but the queue lock has been held by itself and it doesn't know that The clone request has no clone bio when dm_softirq_done() is called. So target drivers can't resubmit it again even error cases. Instead, they can ask dm core for requeueing and remapping the original request in that cases. suspend ======= Request-based dm uses stopping md->queue as suspend of the md. For noflush suspend, just stops md->queue. For flush suspend, inserts a marker request to the tail of md->queue. And dispatches all requests in md->queue until the marker comes to the front of md->queue. Then, stops dispatching request and waits for the all dispatched requests to complete. After that, completes the marker request, stops md->queue and wake up the waiter on the suspend queue, md->wait. resume ====== Starts md->queue. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:35 +01:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm snapshot: suspend origin when doing exception handover In the function snapshot_resume we perform exception store handover. If there is another active snapshot target, the exception store is moved from this target to the target that is being resumed. The problem is that if there is some pending exception, it will point to an incorrect exception store after that handover, causing a crash due to dm-snap-persistent.c:get_exception()'s BUG_ON. This bug can be triggered by repeatedly changing snapshot permissions with "lvchange -p r" and "lvchange -p rw" while there are writes on the associated origin device. To fix this bug, we must suspend the origin device when doing the exception store handover to make sure that there are no pending exceptions: - introduce _origin_hash that keeps track of dm_origin structures. - introduce functions __lookup_dm_origin, __insert_dm_origin and __remove_dm_origin that manipulate the origin hash. - modify snapshot_resume so that it calls dm_internal_suspend_fast() and dm_internal_resume_fast() on the origin device. NOTE to stable@ people: When backporting to kernels 3.12-3.18, use dm_internal_suspend and dm_internal_resume instead of dm_internal_suspend_fast and dm_internal_resume_fast. When backporting to kernels older than 3.12, you need to pick functions dm_internal_suspend and dm_internal_resume from the commit fd2ed4d252701d3bbed4cd3e3d267ad469bb832a. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2015-02-26 11:40:35 -05:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
dm snapshot: suspend origin when doing exception handover In the function snapshot_resume we perform exception store handover. If there is another active snapshot target, the exception store is moved from this target to the target that is being resumed. The problem is that if there is some pending exception, it will point to an incorrect exception store after that handover, causing a crash due to dm-snap-persistent.c:get_exception()'s BUG_ON. This bug can be triggered by repeatedly changing snapshot permissions with "lvchange -p r" and "lvchange -p rw" while there are writes on the associated origin device. To fix this bug, we must suspend the origin device when doing the exception store handover to make sure that there are no pending exceptions: - introduce _origin_hash that keeps track of dm_origin structures. - introduce functions __lookup_dm_origin, __insert_dm_origin and __remove_dm_origin that manipulate the origin hash. - modify snapshot_resume so that it calls dm_internal_suspend_fast() and dm_internal_resume_fast() on the origin device. NOTE to stable@ people: When backporting to kernels 3.12-3.18, use dm_internal_suspend and dm_internal_resume instead of dm_internal_suspend_fast and dm_internal_resume_fast. When backporting to kernels older than 3.12, you need to pick functions dm_internal_suspend and dm_internal_resume from the commit fd2ed4d252701d3bbed4cd3e3d267ad469bb832a. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2015-02-26 11:40:35 -05:00
dm: fix race between dm_get_from_kobject() and __dm_destroy() The following BUG_ON was hit when testing repeat creation and removal of DM devices: kernel BUG at drivers/md/dm.c:2919! CPU: 7 PID: 750 Comm: systemd-udevd Not tainted 4.1.44 Call Trace: [<ffffffff81649e8b>] dm_get_from_kobject+0x34/0x3a [<ffffffff81650ef1>] dm_attr_show+0x2b/0x5e [<ffffffff817b46d1>] ? mutex_lock+0x26/0x44 [<ffffffff811df7f5>] sysfs_kf_seq_show+0x83/0xcf [<ffffffff811de257>] kernfs_seq_show+0x23/0x25 [<ffffffff81199118>] seq_read+0x16f/0x325 [<ffffffff811de994>] kernfs_fop_read+0x3a/0x13f [<ffffffff8117b625>] __vfs_read+0x26/0x9d [<ffffffff8130eb59>] ? security_file_permission+0x3c/0x44 [<ffffffff8117bdb8>] ? rw_verify_area+0x83/0xd9 [<ffffffff8117be9d>] vfs_read+0x8f/0xcf [<ffffffff81193e34>] ? __fdget_pos+0x12/0x41 [<ffffffff8117c686>] SyS_read+0x4b/0x76 [<ffffffff817b606e>] system_call_fastpath+0x12/0x71 The bug can be easily triggered, if an extra delay (e.g. 10ms) is added between the test of DMF_FREEING & DMF_DELETING and dm_get() in dm_get_from_kobject(). To fix it, we need to ensure the test of DMF_FREEING & DMF_DELETING and dm_get() are done in an atomic way, so _minor_lock is used. The other callers of dm_get() have also been checked to be OK: some callers invoke dm_get() under _minor_lock, some callers invoke it under _hash_lock, and dm_start_request() invoke it after increasing md->open_count. Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-01 15:42:36 +08:00
dm: fix race between dm_get_from_kobject() and __dm_destroy() The following BUG_ON was hit when testing repeat creation and removal of DM devices: kernel BUG at drivers/md/dm.c:2919! CPU: 7 PID: 750 Comm: systemd-udevd Not tainted 4.1.44 Call Trace: [<ffffffff81649e8b>] dm_get_from_kobject+0x34/0x3a [<ffffffff81650ef1>] dm_attr_show+0x2b/0x5e [<ffffffff817b46d1>] ? mutex_lock+0x26/0x44 [<ffffffff811df7f5>] sysfs_kf_seq_show+0x83/0xcf [<ffffffff811de257>] kernfs_seq_show+0x23/0x25 [<ffffffff81199118>] seq_read+0x16f/0x325 [<ffffffff811de994>] kernfs_fop_read+0x3a/0x13f [<ffffffff8117b625>] __vfs_read+0x26/0x9d [<ffffffff8130eb59>] ? security_file_permission+0x3c/0x44 [<ffffffff8117bdb8>] ? rw_verify_area+0x83/0xd9 [<ffffffff8117be9d>] vfs_read+0x8f/0xcf [<ffffffff81193e34>] ? __fdget_pos+0x12/0x41 [<ffffffff8117c686>] SyS_read+0x4b/0x76 [<ffffffff817b606e>] system_call_fastpath+0x12/0x71 The bug can be easily triggered, if an extra delay (e.g. 10ms) is added between the test of DMF_FREEING & DMF_DELETING and dm_get() in dm_get_from_kobject(). To fix it, we need to ensure the test of DMF_FREEING & DMF_DELETING and dm_get() are done in an atomic way, so _minor_lock is used. The other callers of dm_get() have also been checked to be OK: some callers invoke dm_get() under _minor_lock, some callers invoke it under _hash_lock, and dm_start_request() invoke it after increasing md->open_count. Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-01 15:42:36 +08:00
dm: enhance internal suspend and resume interface Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2014-10-28 18:34:52 -04:00
[PATCH] dm: suspend: add noflush pushback In device-mapper I/O is sometimes queued within targets for later processing. For example the multipath target can be configured to store I/O when no paths are available instead of returning it -EIO. This patch allows the device-mapper core to instruct a target to transfer the contents of any such in-target queue back into the core. This frees up the resources used by the target so the core can replace that target with an alternative one and then resend the I/O to it. Without this patch the only way to change the target in such circumstances involves returning the I/O with an error back to the filesystem/application. In the multipath case, this patch will let us add new paths for existing I/O to try after all the existing paths have failed. DMF_NOFLUSH_SUSPENDING ---------------------- If the DM_NOFLUSH_FLAG ioctl option is specified at suspend time, the DMF_NOFLUSH_SUSPENDING flag is set in md->flags during dm_suspend(). It is always cleared before dm_suspend() returns. The flag must be visible while the target is flushing pending I/Os so it is set before presuspend where the flush starts and unset after the wait for md->pending where the flush ends. Target drivers can check this flag by calling dm_noflush_suspending(). DM_MAPIO_REQUEUE / DM_ENDIO_REQUEUE ----------------------------------- A target's map() function can now return DM_MAPIO_REQUEUE to request the device mapper core queue the bio. Similarly, a target's end_io() function can return DM_ENDIO_REQUEUE to request the same. This has been labelled 'pushback'. The __map_bio() and clone_endio() functions in the core treat these return values as errors and call dec_pending() to end the I/O. dec_pending ----------- dec_pending() saves the pushback request in struct dm_io->error. Once all the split clones have ended, dec_pending() will put the original bio on the md->pushback list. Note that this supercedes any I/O errors. It is possible for the suspend with DM_NOFLUSH_FLAG to be aborted while in progress (e.g. by user interrupt). dec_pending() checks for this and returns -EIO if it happened. pushdback list and pushback_lock -------------------------------- The bio is queued on md->pushback temporarily in dec_pending(), and after all pending I/Os return, md->pushback is merged into md->deferred in dm_suspend() for re-issuing at resume time. md->pushback_lock protects md->pushback. The lock should be held with irq disabled because dec_pending() can be called from interrupt context. Queueing bios to md->pushback in dec_pending() must be done atomically with the check for DMF_NOFLUSH_SUSPENDING flag. So md->pushback_lock is held when checking the flag. Otherwise dec_pending() may queue a bio to md->pushback after the interrupted dm_suspend() flushes md->pushback. Then the bio would be left in md->pushback. Flag setting in dm_suspend() can be done without md->pushback_lock because the flag is checked only after presuspend and the set value is already made visible via the target's presuspend function. The flag can be checked without md->pushback_lock (e.g. the first part of the dec_pending() or target drivers), because the flag is checked again with md->pushback_lock held when the bio is really queued to md->pushback as described above. So even if the flag is cleared after the lockless checkings, the bio isn't left in md->pushback but returned to applications with -EIO. Other notes on the current patch -------------------------------- - md->pushback is added to the struct mapped_device instead of using md->deferred directly because md->io_lock which protects md->deferred is rw_semaphore and can't be used in interrupt context like dec_pending(), and md->io_lock protects the DMF_BLOCK_IO flag of md->flags too. - Don't issue lock_fs() in dm_suspend() if the DM_NOFLUSH_FLAG ioctl option is specified, because I/Os generated by lock_fs() would be pushed back and never return if there were no valid devices. - If an error occurs in dm_suspend() after the DMF_NOFLUSH_SUSPENDING flag is set, md->pushback must be flushed because I/Os may be queued to the list already. (flush_and_out label in dm_suspend()) Test results ------------ I have tested using multipath target with the next patch. The following tests are for regression/compatibility: - I/Os succeed when valid paths exist; - I/Os fail when there are no valid paths and queue_if_no_path is not set; - I/Os are queued in the multipath target when there are no valid paths and queue_if_no_path is set; - The queued I/Os above fail when suspend is issued without the DM_NOFLUSH_FLAG ioctl option. I/Os spanning 2 multipath targets also fail. The following tests are for the normal code path of new pushback feature: - Queued I/Os in the multipath target are flushed from the target but don't return when suspend is issued with the DM_NOFLUSH_FLAG ioctl option; - The I/Os above are queued in the multipath target again when resume is issued without path recovery; - The I/Os above succeed when resume is issued after path recovery or table load; - Queued I/Os in the multipath target succeed when resume is issued with the DM_NOFLUSH_FLAG ioctl option after table load. I/Os spanning 2 multipath targets also succeed. The following tests are for the error paths of the new pushback feature: - When the bdget_disk() fails in dm_suspend(), the DMF_NOFLUSH_SUSPENDING flag is cleared and I/Os already queued to the pushback list are flushed properly. - When suspend with the DM_NOFLUSH_FLAG ioctl option is interrupted, o I/Os which had already been queued to the pushback list at the time don't return, and are re-issued at resume time; o I/Os which hadn't been returned at the time return with EIO. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 02:41:09 -08:00
[PATCH] dm: suspend: add noflush pushback In device-mapper I/O is sometimes queued within targets for later processing. For example the multipath target can be configured to store I/O when no paths are available instead of returning it -EIO. This patch allows the device-mapper core to instruct a target to transfer the contents of any such in-target queue back into the core. This frees up the resources used by the target so the core can replace that target with an alternative one and then resend the I/O to it. Without this patch the only way to change the target in such circumstances involves returning the I/O with an error back to the filesystem/application. In the multipath case, this patch will let us add new paths for existing I/O to try after all the existing paths have failed. DMF_NOFLUSH_SUSPENDING ---------------------- If the DM_NOFLUSH_FLAG ioctl option is specified at suspend time, the DMF_NOFLUSH_SUSPENDING flag is set in md->flags during dm_suspend(). It is always cleared before dm_suspend() returns. The flag must be visible while the target is flushing pending I/Os so it is set before presuspend where the flush starts and unset after the wait for md->pending where the flush ends. Target drivers can check this flag by calling dm_noflush_suspending(). DM_MAPIO_REQUEUE / DM_ENDIO_REQUEUE ----------------------------------- A target's map() function can now return DM_MAPIO_REQUEUE to request the device mapper core queue the bio. Similarly, a target's end_io() function can return DM_ENDIO_REQUEUE to request the same. This has been labelled 'pushback'. The __map_bio() and clone_endio() functions in the core treat these return values as errors and call dec_pending() to end the I/O. dec_pending ----------- dec_pending() saves the pushback request in struct dm_io->error. Once all the split clones have ended, dec_pending() will put the original bio on the md->pushback list. Note that this supercedes any I/O errors. It is possible for the suspend with DM_NOFLUSH_FLAG to be aborted while in progress (e.g. by user interrupt). dec_pending() checks for this and returns -EIO if it happened. pushdback list and pushback_lock -------------------------------- The bio is queued on md->pushback temporarily in dec_pending(), and after all pending I/Os return, md->pushback is merged into md->deferred in dm_suspend() for re-issuing at resume time. md->pushback_lock protects md->pushback. The lock should be held with irq disabled because dec_pending() can be called from interrupt context. Queueing bios to md->pushback in dec_pending() must be done atomically with the check for DMF_NOFLUSH_SUSPENDING flag. So md->pushback_lock is held when checking the flag. Otherwise dec_pending() may queue a bio to md->pushback after the interrupted dm_suspend() flushes md->pushback. Then the bio would be left in md->pushback. Flag setting in dm_suspend() can be done without md->pushback_lock because the flag is checked only after presuspend and the set value is already made visible via the target's presuspend function. The flag can be checked without md->pushback_lock (e.g. the first part of the dec_pending() or target drivers), because the flag is checked again with md->pushback_lock held when the bio is really queued to md->pushback as described above. So even if the flag is cleared after the lockless checkings, the bio isn't left in md->pushback but returned to applications with -EIO. Other notes on the current patch -------------------------------- - md->pushback is added to the struct mapped_device instead of using md->deferred directly because md->io_lock which protects md->deferred is rw_semaphore and can't be used in interrupt context like dec_pending(), and md->io_lock protects the DMF_BLOCK_IO flag of md->flags too. - Don't issue lock_fs() in dm_suspend() if the DM_NOFLUSH_FLAG ioctl option is specified, because I/Os generated by lock_fs() would be pushed back and never return if there were no valid devices. - If an error occurs in dm_suspend() after the DMF_NOFLUSH_SUSPENDING flag is set, md->pushback must be flushed because I/Os may be queued to the list already. (flush_and_out label in dm_suspend()) Test results ------------ I have tested using multipath target with the next patch. The following tests are for regression/compatibility: - I/Os succeed when valid paths exist; - I/Os fail when there are no valid paths and queue_if_no_path is not set; - I/Os are queued in the multipath target when there are no valid paths and queue_if_no_path is set; - The queued I/Os above fail when suspend is issued without the DM_NOFLUSH_FLAG ioctl option. I/Os spanning 2 multipath targets also fail. The following tests are for the normal code path of new pushback feature: - Queued I/Os in the multipath target are flushed from the target but don't return when suspend is issued with the DM_NOFLUSH_FLAG ioctl option; - The I/Os above are queued in the multipath target again when resume is issued without path recovery; - The I/Os above succeed when resume is issued after path recovery or table load; - Queued I/Os in the multipath target succeed when resume is issued with the DM_NOFLUSH_FLAG ioctl option after table load. I/Os spanning 2 multipath targets also succeed. The following tests are for the error paths of the new pushback feature: - When the bdget_disk() fails in dm_suspend(), the DMF_NOFLUSH_SUSPENDING flag is cleared and I/Os already queued to the pushback list are flushed properly. - When suspend with the DM_NOFLUSH_FLAG ioctl option is interrupted, o I/Os which had already been queued to the pushback list at the time don't return, and are re-issued at resume time; o I/Os which hadn't been returned at the time return with EIO. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 02:41:09 -08:00