kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-15 19:56:03 +00:00
Code Issues Releases Packages Activity
linux/net/ethtool/netlink.h

412 lines
17 KiB
Raw Normal View History

ethtool: introduce ethtool netlink interface Basic genetlink and init infrastructure for the netlink interface, register genetlink family "ethtool". Add CONFIG_ETHTOOL_NETLINK Kconfig option to make the build optional. Add initial overall interface description into Documentation/networking/ethtool-netlink.rst, further patches will add more detailed information. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:18 +01:00
ethtool: helper functions for netlink interface Add common request/reply header definition and helpers to parse request header and fill reply header. Provide ethnl_update_* helpers to update structure members from request attributes (to be used for *_SET requests). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:23 +01:00
ethtool: rename ethnl_parse_header() to ethnl_parse_header_dev_get() Andrew Lunn pointed out that even if it's documented that ethnl_parse_header() takes reference to network device if it fills it into the target structure, its name doesn't make it apparent so that corresponding dev_put() looks like mismatched. Rename the function ethnl_parse_header_dev_get() to indicate that it takes a reference. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:38 +01:00
ethtool: helper functions for netlink interface Add common request/reply header definition and helpers to parse request header and fill reply header. Provide ethnl_update_* helpers to update structure members from request attributes (to be used for *_SET requests). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:23 +01:00
ethtool: add tunnel info interface Add an interface to report offloaded UDP ports via ethtool netlink. Now that core takes care of tracking which UDP tunnel ports the NICs are aware of we can quite easily export this information out to user space. The responsibility of writing the netlink dumps is split between ethtool code and udp_tunnel_nic.c - since udp_tunnel module may not always be loaded, yet we should always report the capabilities of the NIC. $ ethtool --show-tunnels eth0 Tunnel information for eth0: UDP port table 0: Size: 4 Types: vxlan No entries UDP port table 1: Size: 4 Types: geneve, vxlan-gpe Entries (1): port 1230, vxlan-gpe v4: - back to v2, build fix is now directly in udp_tunnel.h v3: - don't compile ETHTOOL_MSG_TUNNEL_INFO_GET in if CONFIG_INET not set. v2: - fix string set count, - reorder enums in the uAPI, - fix type of ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES to bitset in docs and comments. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09 17:42:47 -07:00
net: ethtool: Make helpers public Make some helpers for building ethtool netlink messages available outside the compilation unit, so they can be used for building messages which are not simple get/set. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 21:12:35 +02:00
ethtool: helper functions for netlink interface Add common request/reply header definition and helpers to parse request header and fill reply header. Provide ethnl_update_* helpers to update structure members from request attributes (to be used for *_SET requests). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:23 +01:00
ethtool: fix kdoc attr name Add missing 't' in attrtype. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12 11:47:07 -07:00
ethtool: helper functions for netlink interface Add common request/reply header definition and helpers to parse request header and fill reply header. Provide ethnl_update_* helpers to update structure members from request attributes (to be used for *_SET requests). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:23 +01:00
ethtool: Fix a typo atribute ==> attribute Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02 14:54:28 +08:00
ethtool: helper functions for netlink interface Add common request/reply header definition and helpers to parse request header and fill reply header. Provide ethnl_update_* helpers to update structure members from request attributes (to be used for *_SET requests). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:23 +01:00
ethtool: default handlers for GET requests Significant part of GET request processing is common for most request types but unfortunately it cannot be easily separated from type specific code as we need to alternate between common actions (parsing common request header, allocating message and filling netlink/genetlink headers etc.) and specific actions (querying the device, composing the reply). The processing also happens in three different situations: "do" request, "dump" request and notification, each doing things in slightly different way. The request specific code is implemented in four or five callbacks defined in an instance of struct get_request_ops: parse_request() - parse incoming message prepare_data() - retrieve data from driver or NIC reply_size() - estimate reply message size fill_reply() - compose reply message cleanup_data() - (optional) clean up additional data Other members of struct get_request_ops describe the data structure holding information from client request and data used to compose the message. The default handlers ethnl_default_doit(), ethnl_default_dumpit(), ethnl_default_start() and ethnl_default_done() can be then used in genl_ops handler. Notification handler will be introduced in a later patch. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:38 +01:00
ethtool: helper functions for netlink interface Add common request/reply header definition and helpers to parse request header and fill reply header. Provide ethnl_update_* helpers to update structure members from request attributes (to be used for *_SET requests). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:23 +01:00
netlink: add net device refcount tracker to struct ethnl_req_info Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 17:30:37 -08:00
ethtool: helper functions for netlink interface Add common request/reply header definition and helpers to parse request header and fill reply header. Provide ethnl_update_* helpers to update structure members from request attributes (to be used for *_SET requests). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:23 +01:00
ethtool: default handlers for GET requests Significant part of GET request processing is common for most request types but unfortunately it cannot be easily separated from type specific code as we need to alternate between common actions (parsing common request header, allocating message and filling netlink/genetlink headers etc.) and specific actions (querying the device, composing the reply). The processing also happens in three different situations: "do" request, "dump" request and notification, each doing things in slightly different way. The request specific code is implemented in four or five callbacks defined in an instance of struct get_request_ops: parse_request() - parse incoming message prepare_data() - retrieve data from driver or NIC reply_size() - estimate reply message size fill_reply() - compose reply message cleanup_data() - (optional) clean up additional data Other members of struct get_request_ops describe the data structure holding information from client request and data used to compose the message. The default handlers ethnl_default_doit(), ethnl_default_dumpit(), ethnl_default_start() and ethnl_default_done() can be then used in genl_ops handler. Notification handler will be introduced in a later patch. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:38 +01:00
ethtool: helper functions for netlink interface Add common request/reply header definition and helpers to parse request header and fill reply header. Provide ethnl_update_* helpers to update structure members from request attributes (to be used for *_SET requests). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:23 +01:00
netlink: add net device refcount tracker to struct ethnl_req_info Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06 17:30:37 -08:00
ethtool: helper functions for netlink interface Add common request/reply header definition and helpers to parse request header and fill reply header. Provide ethnl_update_* helpers to update structure members from request attributes (to be used for *_SET requests). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:23 +01:00
ethtool: introduce ethtool netlink interface Basic genetlink and init infrastructure for the netlink interface, register genetlink family "ethtool". Add CONFIG_ETHTOOL_NETLINK Kconfig option to make the build optional. Add initial overall interface description into Documentation/networking/ethtool-netlink.rst, further patches will add more detailed information. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:18 +01:00
ethtool: use ethnl_parse_header_dev_put() It seems I missed that most ethnl_parse_header_dev_get() callers declare an on-stack struct ethnl_req_info, and that they simply call dev_put(req_info.dev) when about to return. Add ethnl_parse_header_dev_put() helper to properly untrack reference taken by ethnl_parse_header_dev_get(). Fixes: e4b8954074f6 ("netlink: add net device refcount tracker to struct ethnl_req_info") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14 00:42:30 -08:00
ethtool: default handlers for GET requests Significant part of GET request processing is common for most request types but unfortunately it cannot be easily separated from type specific code as we need to alternate between common actions (parsing common request header, allocating message and filling netlink/genetlink headers etc.) and specific actions (querying the device, composing the reply). The processing also happens in three different situations: "do" request, "dump" request and notification, each doing things in slightly different way. The request specific code is implemented in four or five callbacks defined in an instance of struct get_request_ops: parse_request() - parse incoming message prepare_data() - retrieve data from driver or NIC reply_size() - estimate reply message size fill_reply() - compose reply message cleanup_data() - (optional) clean up additional data Other members of struct get_request_ops describe the data structure holding information from client request and data used to compose the message. The default handlers ethnl_default_doit(), ethnl_default_dumpit(), ethnl_default_start() and ethnl_default_done() can be then used in genl_ops handler. Notification handler will be introduced in a later patch. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:38 +01:00
ethtool: move implementation of ethnl_ops_begin/complete to netlink.c In preparation of subsequent extensions to both functions move the implementations from netlink.h to netlink.c. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-01 12:37:39 +02:00
ethtool: default handlers for GET requests Significant part of GET request processing is common for most request types but unfortunately it cannot be easily separated from type specific code as we need to alternate between common actions (parsing common request header, allocating message and filling netlink/genetlink headers etc.) and specific actions (querying the device, composing the reply). The processing also happens in three different situations: "do" request, "dump" request and notification, each doing things in slightly different way. The request specific code is implemented in four or five callbacks defined in an instance of struct get_request_ops: parse_request() - parse incoming message prepare_data() - retrieve data from driver or NIC reply_size() - estimate reply message size fill_reply() - compose reply message cleanup_data() - (optional) clean up additional data Other members of struct get_request_ops describe the data structure holding information from client request and data used to compose the message. The default handlers ethnl_default_doit(), ethnl_default_dumpit(), ethnl_default_start() and ethnl_default_done() can be then used in genl_ops handler. Notification handler will be introduced in a later patch. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:38 +01:00
ethtool: add default notification handler The ethtool netlink notifications have the same format as related GET replies so that if generic GET handling framework is used to process GET requests, its callbacks and instance of struct get_request_ops can be also used to compose corresponding notification message. Provide function ethnl_std_notify() to be used as notification handler in ethnl_notify_handlers table. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:58 +01:00
ethtool: default handlers for GET requests Significant part of GET request processing is common for most request types but unfortunately it cannot be easily separated from type specific code as we need to alternate between common actions (parsing common request header, allocating message and filling netlink/genetlink headers etc.) and specific actions (querying the device, composing the reply). The processing also happens in three different situations: "do" request, "dump" request and notification, each doing things in slightly different way. The request specific code is implemented in four or five callbacks defined in an instance of struct get_request_ops: parse_request() - parse incoming message prepare_data() - retrieve data from driver or NIC reply_size() - estimate reply message size fill_reply() - compose reply message cleanup_data() - (optional) clean up additional data Other members of struct get_request_ops describe the data structure holding information from client request and data used to compose the message. The default handlers ethnl_default_doit(), ethnl_default_dumpit(), ethnl_default_start() and ethnl_default_done() can be then used in genl_ops handler. Notification handler will be introduced in a later patch. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:38 +01:00
ethtool: provide string sets with STRSET_GET request Requests a contents of one or more string sets, i.e. indexed arrays of strings; this information is provided by ETHTOOL_GSSET_INFO and ETHTOOL_GSTRINGS commands of ioctl interface. Unlike ioctl interface, all information can be retrieved with one request and mulitple string sets can be requested at once. There are three types of requests: - no NLM_F_DUMP, no device: get "global" stringsets - no NLM_F_DUMP, with device: get string sets related to the device - NLM_F_DUMP, no device: get device related string sets for all devices Client can request either all string sets of given type (global or device related) or only specific sets. With ETHTOOL_A_STRSET_COUNTS flag set, only set sizes (numbers of strings) are returned. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:43 +01:00
ethtool: provide link settings with LINKINFO_GET request Implement LINKINFO_GET netlink request to get basic link settings provided by ETHTOOL_GLINKSETTINGS and ETHTOOL_GSET ioctl commands. This request provides settings not directly related to autonegotiation and link mode selection: physical port, phy MDIO address, MDI(-X) status, MDI(-X) control and transceiver. LINKINFO_GET request can be used with NLM_F_DUMP (without device identification) to request the information for all devices in current network namespace providing the data. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:48 +01:00
ethtool: provide link mode information with LINKMODES_GET request Implement LINKMODES_GET netlink request to get link modes related information provided by ETHTOOL_GLINKSETTINGS and ETHTOOL_GSET ioctl commands. This request provides supported, advertised and peer advertised link modes, autonegotiation flag, speed and duplex. LINKMODES_GET request can be used with NLM_F_DUMP (without device identification) to request the information for all devices in current network namespace providing the data. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:56:08 +01:00
ethtool: provide link state with LINKSTATE_GET request Implement LINKSTATE_GET netlink request to get link state information. At the moment, only link up flag as provided by ETHTOOL_GLINK ioctl command is returned. LINKSTATE_GET request can be used with NLM_F_DUMP (without device identification) to request the information for all devices in current network namespace providing the data. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:56:23 +01:00
ethtool: provide message mask with DEBUG_GET request Implement DEBUG_GET request to get debugging settings for a device. At the moment, only message mask corresponding to message level as reported by ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in ioctl interface but almost all drivers interpret it as a bit mask.) As part of the implementation, provide symbolic names for message mask bits as ETH_SS_MSG_CLASSES string set. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26 23:11:04 +01:00
ethtool: provide WoL settings with WOL_GET request Implement WOL_GET request to get wake-on-lan settings for a device, traditionally available via ETHTOOL_GWOL ioctl request. As part of the implementation, provide symbolic names for wake-on-line modes as ETH_SS_WOL_MODES string set. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26 23:11:13 +01:00
ethtool: provide netdev features with FEATURES_GET request Implement FEATURES_GET request to get network device features. These are traditionally available via ETHTOOL_GFEATURES ioctl request. v2: - style cleanup suggested by Jakub Kicinski Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:48 +01:00
ethtool: provide private flags with PRIVFLAGS_GET request Implement PRIVFLAGS_GET request to get private flags for a network device. These are traditionally available via ETHTOOL_GPFLAGS ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:08:08 +01:00
ethtool: provide ring sizes with RINGS_GET request Implement RINGS_GET request to get ring sizes of a network device. These are traditionally available via ETHTOOL_GRINGPARAM ioctl request. Omit attributes for ring types which are not supported by driver or device (zero reported for maximum). v2: (all suggested by Jakub Kicinski) - minor cleanup in rings_prepare_data() - more descriptive rings_reply_size() - omit attributes with zero max size Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:08:23 +01:00
ethtool: provide channel counts with CHANNELS_GET request Implement CHANNELS_GET request to get channel counts of a network device. These are traditionally available via ETHTOOL_GCHANNELS ioctl request. Omit attributes for channel types which are not supported by driver or device (zero reported for maximum). v2: (all suggested by Jakub Kicinski) - minor cleanup in channels_prepare_data() - more descriptive channels_reply_size() - omit attributes with zero max count Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:08:38 +01:00
ethtool: provide coalescing parameters with COALESCE_GET request Implement COALESCE_GET request to get coalescing parameters of a network device. These are traditionally available via ETHTOOL_GCOALESCE ioctl request. This commit adds only support for device coalescing parameters, not per queue coalescing parameters. Omit attributes with zero values unless they are declared as supported (i.e. the corresponding bit in ethtool_ops::supported_coalesce_params is set). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:08 +01:00
ethtool: provide pause parameters with PAUSE_GET request Implement PAUSE_GET request to get pause parameters of a network device. These are traditionally available via ETHTOOL_GPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:23 +01:00
ethtool: provide EEE settings with EEE_GET request Implement EEE_GET request to get EEE settings of a network device. These are traditionally available via ETHTOOL_GEEE ioctl request. The netlink interface allows reporting EEE status for all link modes supported by kernel but only first 32 link modes are provided at the moment as only those are reported by the ethtool_ops callback and drivers. v2: fix alignment (whitespace only) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:38 +01:00
ethtool: provide timestamping information with TSINFO_GET request Implement TSINFO_GET request to get timestamping information for a network device. This is traditionally available via ETHTOOL_GET_TS_INFO ioctl request. Move part of ethtool_get_ts_info() into common.c so that ioctl and netlink code use the same logic to get timestamping information from the device. v3: use "TSINFO" rather than "TIMESTAMP", suggested by Richard Cochran Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:58 +01:00
ethtool: support FEC settings over netlink Add FEC API to netlink. This is not a 1-to-1 conversion. FEC settings already depend on link modes to tell user which modes are supported. Take this further an use link modes for manual configuration. Old struct ethtool_fecparam is still used to talk to the drivers, so we need to translate back and forth. We can revisit the internal API if number of FEC encodings starts to grow. Enforce only one active FEC bit (by using a bit position rather than another mask). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29 20:59:52 -07:00
ethtool: Allow network drivers to dump arbitrary EEPROM data Define get_module_eeprom_by_page() ethtool callback and implement netlink infrastructure. get_module_eeprom_by_page() allows network drivers to dump a part of module's EEPROM specified by page and bank numbers along with offset and length. It is effectively a netlink replacement for get_module_info() and get_module_eeprom() pair, which is needed due to emergence of complex non-linear EEPROM layouts. Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09 11:06:34 +03:00
ethtool: add a new command for reading standard stats Add an interface for reading standard stats, including stats which don't have a corresponding control interface. Start with IEEE 802.3 PHY stats. There seems to be only one stat to expose there. Define API to not require user space changes when new stats or groups are added. Groups are based on bitset, stats have a string set associated. v1: wrap stats in a nest Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 12:27:39 -07:00
ethtool: add a new command for getting PHC virtual clocks Add an interface for getting PHC (PTP Hardware Clock) virtual clocks, which are based on PHC physical clock providing hardware timestamp to network packets. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-30 16:11:56 +08:00
ethtool: Add ability to control transceiver modules' power mode Add a pair of new ethtool messages, 'ETHTOOL_MSG_MODULE_SET' and 'ETHTOOL_MSG_MODULE_GET', that can be used to control transceiver modules parameters and retrieve their status. The first parameter to control is the power mode of the module. It is only relevant for paged memory modules, as flat memory modules always operate in low power mode. When a paged memory module is in low power mode, its power consumption is reduced to the minimum, the management interface towards the host is available and the data path is deactivated. User space can choose to put modules that are not currently in use in low power mode and transition them to high power mode before putting the associated ports administratively up. This is useful for user space that favors reduced power consumption and lower temperatures over reduced link up times. In QSFP-DD modules the transition from low power mode to high power mode can take a few seconds and this transition is only expected to get longer with future / more complex modules. User space can control the power mode of the module via the power mode policy attribute ('ETHTOOL_A_MODULE_POWER_MODE_POLICY'). Possible values: * high: Module is always in high power mode. * auto: Module is transitioned by the host to high power mode when the first port using it is put administratively up and to low power mode when the last port using it is put administratively down. The operational power mode of the module is available to user space via the 'ETHTOOL_A_MODULE_POWER_MODE' attribute. The attribute is not reported to user space when a module is not plugged-in. The user API is designed to be generic enough so that it could be used for modules with different memory maps (e.g., SFF-8636, CMIS). The only implementation of the device driver API in this series is for a MAC driver (mlxsw) where the module is controlled by the device's firmware, but it is designed to be generic enough so that it could also be used by implementations where the module is controlled by the CPU. CMIS testing ============ # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x03 (ModuleReady) LowPwrAllowRequestHW : Off LowPwrRequestSW : Off The module is not in low power mode, as it is not forced by hardware (LowPwrAllowRequestHW is off) or by software (LowPwrRequestSW is off). The power mode can be queried from the kernel. In case LowPwrAllowRequestHW was on, the kernel would need to take into account the state of the LowPwrRequestHW signal, which is not visible to user space. $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy high power-mode high Change the power mode policy to 'auto': # ethtool --set-module swp11 power-mode-policy auto Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x01 (ModuleLowPwr) LowPwrAllowRequestHW : Off LowPwrRequestSW : On Put the associated port administratively up which will instruct the host to transition the module to high power mode: # ip link set dev swp11 up Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode high Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x03 (ModuleReady) LowPwrAllowRequestHW : Off LowPwrRequestSW : Off Put the associated port administratively down which will instruct the host to transition the module to low power mode: # ip link set dev swp11 down Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x01 (ModuleLowPwr) LowPwrAllowRequestHW : Off LowPwrRequestSW : On SFF-8636 testing ================ # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) enabled Power set : Off Power override : On ... Transmit avg optical power (Channel 1) : 0.7733 mW / -1.12 dBm Transmit avg optical power (Channel 2) : 0.7649 mW / -1.16 dBm Transmit avg optical power (Channel 3) : 0.7790 mW / -1.08 dBm Transmit avg optical power (Channel 4) : 0.7837 mW / -1.06 dBm Rcvr signal avg optical power(Channel 1) : 0.9302 mW / -0.31 dBm Rcvr signal avg optical power(Channel 2) : 0.9079 mW / -0.42 dBm Rcvr signal avg optical power(Channel 3) : 0.8993 mW / -0.46 dBm Rcvr signal avg optical power(Channel 4) : 0.8778 mW / -0.57 dBm The module is not in low power mode, as it is not forced by hardware (Power override is on) or by software (Power set is off). The power mode can be queried from the kernel. In case Power override was off, the kernel would need to take into account the state of the LPMode signal, which is not visible to user space. $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy high power-mode high Change the power mode policy to 'auto': # ethtool --set-module swp13 power-mode-policy auto Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) not enabled Power set : On Power override : On ... Transmit avg optical power (Channel 1) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 2) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 3) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 4) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 1) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 2) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 3) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 4) : 0.0000 mW / -inf dBm Put the associated port administratively up which will instruct the host to transition the module to high power mode: # ip link set dev swp13 up Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode high Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) enabled Power set : Off Power override : On ... Transmit avg optical power (Channel 1) : 0.7934 mW / -1.01 dBm Transmit avg optical power (Channel 2) : 0.7859 mW / -1.05 dBm Transmit avg optical power (Channel 3) : 0.7885 mW / -1.03 dBm Transmit avg optical power (Channel 4) : 0.7985 mW / -0.98 dBm Rcvr signal avg optical power(Channel 1) : 0.9325 mW / -0.30 dBm Rcvr signal avg optical power(Channel 2) : 0.9034 mW / -0.44 dBm Rcvr signal avg optical power(Channel 3) : 0.9086 mW / -0.42 dBm Rcvr signal avg optical power(Channel 4) : 0.8885 mW / -0.51 dBm Put the associated port administratively down which will instruct the host to transition the module to low power mode: # ip link set dev swp13 down Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) not enabled Power set : On Power override : On ... Transmit avg optical power (Channel 1) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 2) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 3) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 4) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 1) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 2) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 3) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 4) : 0.0000 mW / -inf dBm Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-06 13:46:42 +03:00
ethtool: provide string sets with STRSET_GET request Requests a contents of one or more string sets, i.e. indexed arrays of strings; this information is provided by ETHTOOL_GSSET_INFO and ETHTOOL_GSTRINGS commands of ioctl interface. Unlike ioctl interface, all information can be retrieved with one request and mulitple string sets can be requested at once. There are three types of requests: - no NLM_F_DUMP, no device: get "global" stringsets - no NLM_F_DUMP, with device: get string sets related to the device - NLM_F_DUMP, no device: get device related string sets for all devices Client can request either all string sets of given type (global or device related) or only specific sets. With ETHTOOL_A_STRSET_COUNTS flag set, only set sizes (numbers of strings) are returned. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:43 +01:00
ethtool: link up ethnl_header_policy as a nested policy To get the most out of parsing by the core, and to allow dumping full policies we need to specify which policy applies to nested attrs. For headers it's ethnl_header_policy. $ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/* Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:36 -07:00
ethtool: specify which header flags are supported per command Perform header flags validation through the policy. Only pause command supports ETHTOOL_FLAG_STATS. Create a separate policy to be able to express that in policy dumps to user space. Note that even though the core will validate the header policy, it cannot record multiple layers of attributes and we have to re-parse header sub-attrs. When doing so we could skip attribute validation, or use most permissive policy. Opt for the former. We will no longer return the extack cookie for flags but since we only added first new flag in this release it's not expected that any user space had a chance to make use of it. v2: - remove the re-validation in ethnl_parse_header_dev_get() Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:39 -07:00
ethtool: strset: allow ETHTOOL_A_STRSET_COUNTS_ONLY attr The ETHTOOL_A_STRSET_COUNTS_ONLY flag attribute was previously not allowed to be used, but now due to the policy size reduction we would access the tb[] array out of bounds since we tried to check for the attribute despite it not being accepted. Fix both issues by adding it correctly to the appropriate policy. Fixes: ff419afa4310 ("ethtool: trim policy tables") Fixes: 71921690f974 ("ethtool: provide string sets with STRSET_GET request") Reported-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-07 12:53:50 +02:00
ethtool: trim policy tables Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:35 -07:00
ethtool: Extend link modes settings uAPI with lanes Currently, when auto negotiation is on, the user can advertise all the linkmodes which correspond to a specific speed, but does not have a similar selector for the number of lanes. This is significant when a specific speed can be achieved using different number of lanes. For example, 2x50 or 4x25. Add 'ETHTOOL_A_LINKMODES_LANES' attribute and expand 'struct ethtool_link_settings' with lanes field in order to implement a new lanes-selector that will enable the user to advertise a specific number of lanes as well. When auto negotiation is off, lanes parameter can be forced only if the driver supports it. Add a capability bit in 'struct ethtool_ops' that allows ethtool know if the driver can handle the lanes parameter when auto negotiation is off, so if it does not, an error message will be returned when trying to set lanes. Example: $ ethtool -s swp1 lanes 4 $ ethtool swp1 Settings for swp1: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 25000baseCR/Full 25000baseSR/Full 50000baseCR2/Full 100000baseSR4/Full 100000baseCR4/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 100000baseSR4/Full 100000baseCR4/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: Unknown! Duplex: Unknown! (255) Auto-negotiation: on Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Link detected: no Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02 20:06:06 +02:00
ethtool: trim policy tables Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:35 -07:00
net: ethtool: extend ringparam set/get APIs for tx_push Currently tx push is a standard driver feature which controls use of a fast path descriptor push. So this patch extends the ringparam APIs and data structures to support set/get tx push by ethtool -G/g. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-12 10:01:19 +08:00
ethtool: trim policy tables Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:35 -07:00
ethtool: add two coalesce attributes for CQE mode Currently, there are many drivers who support CQE mode configuration, some configure it as a fixed when initialized, some provide an interface to change it by ethtool private flags. In order to make it more generic, add two new 'ETHTOOL_A_COALESCE_USE_CQE_TX' and 'ETHTOOL_A_COALESCE_USE_CQE_RX' coalesce attributes, then these parameters can be accessed by ethtool netlink coalesce uAPI. Also add an new structure kernel_ethtool_coalesce, then the new parameter can be added into this struct. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-20 15:35:17 +08:00
ethtool: trim policy tables Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:35 -07:00
ethtool: support FEC settings over netlink Add FEC API to netlink. This is not a 1-to-1 conversion. FEC settings already depend on link modes to tell user which modes are supported. Take this further an use link modes for manual configuration. Old struct ethtool_fecparam is still used to talk to the drivers, so we need to translate back and forth. We can revisit the internal API if number of FEC encodings starts to grow. Enforce only one active FEC bit (by using a bit position rather than another mask). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29 20:59:52 -07:00
ethtool: Decrease size of module EEPROM get policy array The 'ETHTOOL_A_MODULE_EEPROM_DATA' attribute is not part of the get request. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22 09:50:48 +03:00
ethtool: add a new command for reading standard stats Add an interface for reading standard stats, including stats which don't have a corresponding control interface. Start with IEEE 802.3 PHY stats. There seems to be only one stat to expose there. Define API to not require user space changes when new stats or groups are added. Groups are based on bitset, stats have a string set associated. v1: wrap stats in a nest Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 12:27:39 -07:00
ethtool: add a new command for getting PHC virtual clocks Add an interface for getting PHC (PTP Hardware Clock) virtual clocks, which are based on PHC physical clock providing hardware timestamp to network packets. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-30 16:11:56 +08:00
ethtool: Add ability to control transceiver modules' power mode Add a pair of new ethtool messages, 'ETHTOOL_MSG_MODULE_SET' and 'ETHTOOL_MSG_MODULE_GET', that can be used to control transceiver modules parameters and retrieve their status. The first parameter to control is the power mode of the module. It is only relevant for paged memory modules, as flat memory modules always operate in low power mode. When a paged memory module is in low power mode, its power consumption is reduced to the minimum, the management interface towards the host is available and the data path is deactivated. User space can choose to put modules that are not currently in use in low power mode and transition them to high power mode before putting the associated ports administratively up. This is useful for user space that favors reduced power consumption and lower temperatures over reduced link up times. In QSFP-DD modules the transition from low power mode to high power mode can take a few seconds and this transition is only expected to get longer with future / more complex modules. User space can control the power mode of the module via the power mode policy attribute ('ETHTOOL_A_MODULE_POWER_MODE_POLICY'). Possible values: * high: Module is always in high power mode. * auto: Module is transitioned by the host to high power mode when the first port using it is put administratively up and to low power mode when the last port using it is put administratively down. The operational power mode of the module is available to user space via the 'ETHTOOL_A_MODULE_POWER_MODE' attribute. The attribute is not reported to user space when a module is not plugged-in. The user API is designed to be generic enough so that it could be used for modules with different memory maps (e.g., SFF-8636, CMIS). The only implementation of the device driver API in this series is for a MAC driver (mlxsw) where the module is controlled by the device's firmware, but it is designed to be generic enough so that it could also be used by implementations where the module is controlled by the CPU. CMIS testing ============ # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x03 (ModuleReady) LowPwrAllowRequestHW : Off LowPwrRequestSW : Off The module is not in low power mode, as it is not forced by hardware (LowPwrAllowRequestHW is off) or by software (LowPwrRequestSW is off). The power mode can be queried from the kernel. In case LowPwrAllowRequestHW was on, the kernel would need to take into account the state of the LowPwrRequestHW signal, which is not visible to user space. $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy high power-mode high Change the power mode policy to 'auto': # ethtool --set-module swp11 power-mode-policy auto Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x01 (ModuleLowPwr) LowPwrAllowRequestHW : Off LowPwrRequestSW : On Put the associated port administratively up which will instruct the host to transition the module to high power mode: # ip link set dev swp11 up Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode high Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x03 (ModuleReady) LowPwrAllowRequestHW : Off LowPwrRequestSW : Off Put the associated port administratively down which will instruct the host to transition the module to low power mode: # ip link set dev swp11 down Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x01 (ModuleLowPwr) LowPwrAllowRequestHW : Off LowPwrRequestSW : On SFF-8636 testing ================ # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) enabled Power set : Off Power override : On ... Transmit avg optical power (Channel 1) : 0.7733 mW / -1.12 dBm Transmit avg optical power (Channel 2) : 0.7649 mW / -1.16 dBm Transmit avg optical power (Channel 3) : 0.7790 mW / -1.08 dBm Transmit avg optical power (Channel 4) : 0.7837 mW / -1.06 dBm Rcvr signal avg optical power(Channel 1) : 0.9302 mW / -0.31 dBm Rcvr signal avg optical power(Channel 2) : 0.9079 mW / -0.42 dBm Rcvr signal avg optical power(Channel 3) : 0.8993 mW / -0.46 dBm Rcvr signal avg optical power(Channel 4) : 0.8778 mW / -0.57 dBm The module is not in low power mode, as it is not forced by hardware (Power override is on) or by software (Power set is off). The power mode can be queried from the kernel. In case Power override was off, the kernel would need to take into account the state of the LPMode signal, which is not visible to user space. $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy high power-mode high Change the power mode policy to 'auto': # ethtool --set-module swp13 power-mode-policy auto Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) not enabled Power set : On Power override : On ... Transmit avg optical power (Channel 1) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 2) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 3) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 4) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 1) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 2) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 3) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 4) : 0.0000 mW / -inf dBm Put the associated port administratively up which will instruct the host to transition the module to high power mode: # ip link set dev swp13 up Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode high Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) enabled Power set : Off Power override : On ... Transmit avg optical power (Channel 1) : 0.7934 mW / -1.01 dBm Transmit avg optical power (Channel 2) : 0.7859 mW / -1.05 dBm Transmit avg optical power (Channel 3) : 0.7885 mW / -1.03 dBm Transmit avg optical power (Channel 4) : 0.7985 mW / -0.98 dBm Rcvr signal avg optical power(Channel 1) : 0.9325 mW / -0.30 dBm Rcvr signal avg optical power(Channel 2) : 0.9034 mW / -0.44 dBm Rcvr signal avg optical power(Channel 3) : 0.9086 mW / -0.42 dBm Rcvr signal avg optical power(Channel 4) : 0.8885 mW / -0.51 dBm Put the associated port administratively down which will instruct the host to transition the module to low power mode: # ip link set dev swp13 down Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) not enabled Power set : On Power override : On ... Transmit avg optical power (Channel 1) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 2) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 3) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 4) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 1) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 2) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 3) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 4) : 0.0000 mW / -inf dBm Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-06 13:46:42 +03:00
ethtool: wire up get policies to ops Wire up policies for get commands in struct nla_policy of the ethtool family. Make use of genetlink code attr validation and parsing, as well as allow dumping policies to user space. For every ETHTOOL_MSG_*_GET: - add 'ethnl_' prefix to policy name - add extern declaration in net/ethtool/netlink.h - wire up the policy & attr in ethtool_genl_ops[]. - remove .request_policy and .max_attr from ethnl_request_ops. Obviously core only records the first "layer" of parsed attrs so we still need to parse the sub-attrs of the nested header attribute. v2: - merge of patches 1 and 2 from v1 - remove stray empty lines in ops - also remove .max_attr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05 15:07:33 -07:00
ethtool: set link settings with LINKINFO_SET request Implement LINKINFO_SET netlink request to set link settings queried by LINKINFO_GET message. Only physical port, phy MDIO address and MDI(-X) control can be set, attempt to modify MDI(-X) status and transceiver is rejected. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:53 +01:00
ethtool: set link modes related data with LINKMODES_SET request Implement LINKMODES_SET netlink request to set advertised linkmodes and related attributes as ETHTOOL_SLINKSETTINGS and ETHTOOL_SSET commands do. The request allows setting autonegotiation flag, speed, duplex and advertised link modes. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:56:13 +01:00
ethtool: set message mask with DEBUG_SET request Implement DEBUG_SET netlink request to set debugging settings for a device. At the moment, only message mask corresponding to message level as set by ETHTOOL_SMSGLVL ioctl request can be set. (It is called message level in ioctl interface but almost all drivers interpret it as a bit mask.) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26 23:11:07 +01:00
ethtool: set wake-on-lan settings with WOL_SET request Implement WOL_SET netlink request to set wake-on-lan settings. This is equivalent to ETHTOOL_SWOL ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26 23:11:16 +01:00
ethtool: set netdev features with FEATURES_SET request Implement FEATURES_SET netlink request to set network device features. These are traditionally set using ETHTOOL_SFEATURES ioctl request. Actual change is subject to netdev_change_features() sanity checks so that it can differ from what was requested. Unlike with most other SET requests, in addition to error code and optional extack, kernel provides an optional reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with different semantics: information about difference between user request and actual result and difference between old and new state of dev->features. This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:07:58 +01:00
ethtool: set device private flags with PRIVFLAGS_SET request Implement PRIVFLAGS_SET netlink request to set private flags of a network device. These are traditionally set with ETHTOOL_SPFLAGS ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:08:13 +01:00
ethtool: set device ring sizes with RINGS_SET request Implement RINGS_SET netlink request to set ring sizes of a network device. These are traditionally set with ETHTOOL_SRINGPARAM ioctl request. Like the ioctl implementation, the generic ethtool code checks if supplied values do not exceed driver defined limits; if they do, first offending attribute is reported using extack. v2: - fix netdev reference leak in error path (found by Jakub Kicinsky) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:08:28 +01:00
ethtool: set device channel counts with CHANNELS_SET request Implement CHANNELS_SET netlink request to set channel counts of a network device. These are traditionally set with ETHTOOL_SCHANNELS ioctl request. Like the ioctl implementation, the generic ethtool code checks if supplied values do not exceed driver defined limits; if they do, first offending attribute is reported using extack. Checks preventing removing channels used for RX indirection table or zerocopy AF_XDP socket are also implemented. Move ethtool_get_max_rxfh_channel() helper into common.c so that it can be used by both ioctl and netlink code. v2: - fix netdev reference leak in error path (found by Jakub Kicinsky) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 21:08:43 +01:00
ethtool: set coalescing parameters with COALESCE_SET request Implement COALESCE_SET netlink request to set coalescing parameters of a network device. These are traditionally set with ETHTOOL_SCOALESCE ioctl request. This commit adds only support for device coalescing parameters, not per queue coalescing parameters. Like the ioctl implementation, the generic ethtool code checks if only supported parameters are modified; if not, first offending attribute is reported using extack. v2: fix alignment (whitespace only) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:13 +01:00
ethtool: set pause parameters with PAUSE_SET request Implement PAUSE_SET netlink request to set pause parameters of a network device. Thease are traditionally set with ETHTOOL_SPAUSEPARAM ioctl request. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:28 +01:00
ethtool: set EEE settings with EEE_SET request Implement EEE_SET netlink request to set EEE settings of a network device. These are traditionally set with ETHTOOL_SEEE ioctl request. The netlink interface allows setting the EEE status for all link modes supported by kernel but only first 32 link modes can be set at the moment as only those are supported by the ethtool_ops callback. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 00:01:43 +01:00
net: ethtool: netlink: Add support for triggering a cable test Add new ethtool netlink calls to trigger the starting of a PHY cable test. Add Kconfig'ury to ETHTOOL_NETLINK so that PHYLIB is not a module when ETHTOOL_NETLINK is builtin, which would result in kernel linking errors. v2: Remove unwanted white space change Remove ethnl_cable_test_act_ops and use doit handler Rename cable_test_set_policy cable_test_act_policy Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY v3: Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY from documentation Remove unused cable_test_get_policy Add Reviewed-by tags v4: Remove unwanted blank line Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 21:12:33 +02:00
net: ethtool: Add generic parts of cable test TDR Add the generic parts of the code used to trigger a cable test and return raw TDR data. Any PHY driver which support this must implement the new driver op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2 Update nxp-tja11xx for API change. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27 00:21:38 +02:00
ethtool: add tunnel info interface Add an interface to report offloaded UDP ports via ethtool netlink. Now that core takes care of tracking which UDP tunnel ports the NICs are aware of we can quite easily export this information out to user space. The responsibility of writing the netlink dumps is split between ethtool code and udp_tunnel_nic.c - since udp_tunnel module may not always be loaded, yet we should always report the capabilities of the NIC. $ ethtool --show-tunnels eth0 Tunnel information for eth0: UDP port table 0: Size: 4 Types: vxlan No entries UDP port table 1: Size: 4 Types: geneve, vxlan-gpe Entries (1): port 1230, vxlan-gpe v4: - back to v2, build fix is now directly in udp_tunnel.h v3: - don't compile ETHTOOL_MSG_TUNNEL_INFO_GET in if CONFIG_INET not set. v2: - fix string set count, - reorder enums in the uAPI, - fix type of ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES to bitset in docs and comments. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09 17:42:47 -07:00
ethtool: support FEC settings over netlink Add FEC API to netlink. This is not a 1-to-1 conversion. FEC settings already depend on link modes to tell user which modes are supported. Take this further an use link modes for manual configuration. Old struct ethtool_fecparam is still used to talk to the drivers, so we need to translate back and forth. We can revisit the internal API if number of FEC encodings starts to grow. Enforce only one active FEC bit (by using a bit position rather than another mask). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29 20:59:52 -07:00
ethtool: Add ability to control transceiver modules' power mode Add a pair of new ethtool messages, 'ETHTOOL_MSG_MODULE_SET' and 'ETHTOOL_MSG_MODULE_GET', that can be used to control transceiver modules parameters and retrieve their status. The first parameter to control is the power mode of the module. It is only relevant for paged memory modules, as flat memory modules always operate in low power mode. When a paged memory module is in low power mode, its power consumption is reduced to the minimum, the management interface towards the host is available and the data path is deactivated. User space can choose to put modules that are not currently in use in low power mode and transition them to high power mode before putting the associated ports administratively up. This is useful for user space that favors reduced power consumption and lower temperatures over reduced link up times. In QSFP-DD modules the transition from low power mode to high power mode can take a few seconds and this transition is only expected to get longer with future / more complex modules. User space can control the power mode of the module via the power mode policy attribute ('ETHTOOL_A_MODULE_POWER_MODE_POLICY'). Possible values: * high: Module is always in high power mode. * auto: Module is transitioned by the host to high power mode when the first port using it is put administratively up and to low power mode when the last port using it is put administratively down. The operational power mode of the module is available to user space via the 'ETHTOOL_A_MODULE_POWER_MODE' attribute. The attribute is not reported to user space when a module is not plugged-in. The user API is designed to be generic enough so that it could be used for modules with different memory maps (e.g., SFF-8636, CMIS). The only implementation of the device driver API in this series is for a MAC driver (mlxsw) where the module is controlled by the device's firmware, but it is designed to be generic enough so that it could also be used by implementations where the module is controlled by the CPU. CMIS testing ============ # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x03 (ModuleReady) LowPwrAllowRequestHW : Off LowPwrRequestSW : Off The module is not in low power mode, as it is not forced by hardware (LowPwrAllowRequestHW is off) or by software (LowPwrRequestSW is off). The power mode can be queried from the kernel. In case LowPwrAllowRequestHW was on, the kernel would need to take into account the state of the LowPwrRequestHW signal, which is not visible to user space. $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy high power-mode high Change the power mode policy to 'auto': # ethtool --set-module swp11 power-mode-policy auto Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x01 (ModuleLowPwr) LowPwrAllowRequestHW : Off LowPwrRequestSW : On Put the associated port administratively up which will instruct the host to transition the module to high power mode: # ip link set dev swp11 up Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode high Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x03 (ModuleReady) LowPwrAllowRequestHW : Off LowPwrRequestSW : Off Put the associated port administratively down which will instruct the host to transition the module to low power mode: # ip link set dev swp11 down Query the power mode again: $ ethtool --show-module swp11 Module parameters for swp11: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp11 Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628)) ... Module State : 0x01 (ModuleLowPwr) LowPwrAllowRequestHW : Off LowPwrRequestSW : On SFF-8636 testing ================ # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) enabled Power set : Off Power override : On ... Transmit avg optical power (Channel 1) : 0.7733 mW / -1.12 dBm Transmit avg optical power (Channel 2) : 0.7649 mW / -1.16 dBm Transmit avg optical power (Channel 3) : 0.7790 mW / -1.08 dBm Transmit avg optical power (Channel 4) : 0.7837 mW / -1.06 dBm Rcvr signal avg optical power(Channel 1) : 0.9302 mW / -0.31 dBm Rcvr signal avg optical power(Channel 2) : 0.9079 mW / -0.42 dBm Rcvr signal avg optical power(Channel 3) : 0.8993 mW / -0.46 dBm Rcvr signal avg optical power(Channel 4) : 0.8778 mW / -0.57 dBm The module is not in low power mode, as it is not forced by hardware (Power override is on) or by software (Power set is off). The power mode can be queried from the kernel. In case Power override was off, the kernel would need to take into account the state of the LPMode signal, which is not visible to user space. $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy high power-mode high Change the power mode policy to 'auto': # ethtool --set-module swp13 power-mode-policy auto Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) not enabled Power set : On Power override : On ... Transmit avg optical power (Channel 1) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 2) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 3) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 4) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 1) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 2) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 3) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 4) : 0.0000 mW / -inf dBm Put the associated port administratively up which will instruct the host to transition the module to high power mode: # ip link set dev swp13 up Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode high Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) enabled Power set : Off Power override : On ... Transmit avg optical power (Channel 1) : 0.7934 mW / -1.01 dBm Transmit avg optical power (Channel 2) : 0.7859 mW / -1.05 dBm Transmit avg optical power (Channel 3) : 0.7885 mW / -1.03 dBm Transmit avg optical power (Channel 4) : 0.7985 mW / -0.98 dBm Rcvr signal avg optical power(Channel 1) : 0.9325 mW / -0.30 dBm Rcvr signal avg optical power(Channel 2) : 0.9034 mW / -0.44 dBm Rcvr signal avg optical power(Channel 3) : 0.9086 mW / -0.42 dBm Rcvr signal avg optical power(Channel 4) : 0.8885 mW / -0.51 dBm Put the associated port administratively down which will instruct the host to transition the module to low power mode: # ip link set dev swp13 down Query the power mode again: $ ethtool --show-module swp13 Module parameters for swp13: power-mode-policy auto power-mode low Verify with the data read from the EEPROM: # ethtool -m swp13 Identifier : 0x11 (QSFP28) ... Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) not enabled Power set : On Power override : On ... Transmit avg optical power (Channel 1) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 2) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 3) : 0.0000 mW / -inf dBm Transmit avg optical power (Channel 4) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 1) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 2) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 3) : 0.0000 mW / -inf dBm Rcvr signal avg optical power(Channel 4) : 0.0000 mW / -inf dBm Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-06 13:46:42 +03:00
ethtool: set link settings with LINKINFO_SET request Implement LINKINFO_SET netlink request to set link settings queried by LINKINFO_GET message. Only physical port, phy MDIO address and MDI(-X) control can be set, attempt to modify MDI(-X) status and transceiver is rejected. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:53 +01:00
ethtool: add a new command for reading standard stats Add an interface for reading standard stats, including stats which don't have a corresponding control interface. Start with IEEE 802.3 PHY stats. There seems to be only one stat to expose there. Define API to not require user space changes when new stats or groups are added. Groups are based on bitset, stats have a string set associated. v1: wrap stats in a nest Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 12:27:39 -07:00
ethtool: add interface to read standard MAC stats Most of the MAC statistics are included in struct rtnl_link_stats64, but some fields are aggregated. Besides it's good to expose these clearly hardware stats separately. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 12:27:40 -07:00
ethtool: add interface to read standard MAC Ctrl stats Number of devices maintains the standard-based MAC control counters for control frames. Add a API for those. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 12:27:41 -07:00
ethtool: add interface to read RMON stats Most devices maintain RMON (RFC 2819) stats - particularly the "histogram" of packets received by size. Unlike other RFCs which duplicate IEEE stats, the short/oversized frame counters in RMON don't seem to match IEEE stats 1-to-1 either, so expose those, too. Do not expose basic packet, CRC errors etc - those are already otherwise covered. Because standard defines packet ranges only up to 1518, and everything above that should theoretically be "oversized" - devices often create their own ranges. Going beyond what the RFC defines - expose the "histogram" in the Tx direction (assume for now that the ranges will be the same). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 12:27:42 -07:00
ethtool: add a new command for reading standard stats Add an interface for reading standard stats, including stats which don't have a corresponding control interface. Start with IEEE 802.3 PHY stats. There seems to be only one stat to expose there. Define API to not require user space changes when new stats or groups are added. Groups are based on bitset, stats have a string set associated. v1: wrap stats in a nest Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16 12:27:39 -07:00
ethtool: introduce ethtool netlink interface Basic genetlink and init infrastructure for the netlink interface, register genetlink family "ethtool". Add CONFIG_ETHTOOL_NETLINK Kconfig option to make the build optional. Add initial overall interface description into Documentation/networking/ethtool-netlink.rst, further patches will add more detailed information. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 15:55:18 +01:00