linux/drivers/acpi/pci_root.c

1063 lines
29 KiB

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 08:55:06 +02:00
PCI / ACPI / PM: Platform support for PCI PME wake-up Although the majority of PCI devices can generate PMEs that in principle may be used to wake up devices suspended at run time, platform support is generally necessary to convert PMEs into wake-up events that can be delivered to the kernel. If ACPI is used for this purpose, PME signals generated by a PCI device will trigger the ACPI GPE associated with the device to generate an ACPI wake-up event that we can set up a handler for, provided that everything is configured correctly. Unfortunately, the subset of PCI devices that have GPEs associated with them is quite limited. The devices without dedicated GPEs have to rely on the GPEs associated with other devices (in the majority of cases their upstream bridges and, possibly, the root bridge) to generate ACPI wake-up events in response to PME signals from them. Add ACPI platform support for PCI PME wake-up: o Add a framework making is possible to use ACPI system notify handlers for run-time PM. o Add new PCI platform callback ->run_wake() to struct pci_platform_pm_ops allowing us to enable/disable the platform to generate wake-up events for given device. Implemet this callback for the ACPI platform. o Define ACPI wake-up handlers for PCI devices and PCI root buses and make the PCI-ACPI binding code register wake-up notifiers for all PCI devices present in the ACPI tables. o Add function pci_dev_run_wake() which can be used by PCI drivers to check if given device is capable of generating wake-up events at run time. Developed in cooperation with Matthew Garrett <mjg@redhat.com>. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-17 23:44:09 +01:00
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
ACPI: Support _OSI("Darwin") correctly Apple hardware queries _OSI("Darwin") in order to determine whether the system is running OS X, and changes firmware behaviour based on the answer. The most obvious difference in behaviour is that Thunderbolt hardware is forcibly powered down unless the system is running OS X. The obvious solution would be to simply add Darwin to the list of supported _OSI strings, but this causes problems. Recent Apple hardware includes two separate methods for checking _OSI strings. The first will check whether Darwin is supported, and if so will exit. The second will check whether Darwin is supported, but will then continue to check for further operating systems. If a further operating system is found then later firmware code will assume that the OS is not OS X. This results in the unfortunate situation where the Thunderbolt controller is available at boot time but remains powered down after suspend. The easiest way to handle this is to special-case it in the Linux-specific OSI handling code. If we see Darwin, we should answer true and then disable all other _OSI vendor strings. The next problem is that the Apple PCI _OSC method has the following code: if (LEqual (0x01, OSDW ())) if (LAnd (LEqual (Arg0, GUID), NEXP) (do stuff) else (fail) NEXP is a value in high memory and is presumably under the control of the firmware. No methods sets it. The methods that are called in the "do stuff" path are dummies. Unless there's some additional firmware call in early boot, there's no way for this call to succeed - and even if it does, it doesn't do anything. The easiest way to handle this is simply to ignore it. We know which flags would be set, so just set them by hand if the platform is running in Darwin mode. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> [andreas.noever@gmail.com: merged two patches, do not touch ACPICA] Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-20 13:19:47 +02:00
treewide: Consolidate Apple DMI checks We're about to amend ACPI bus scan with DMI checks whether we're running on a Mac to support Apple device properties in AML. The DMI checks are performed for every single device, adding overhead for everything x86 that isn't Apple, which is the majority. Rafael and Andy therefore request to perform the DMI match only once and cache the result. Outside of ACPI various other Apple DMI checks exist and it seems reasonable to use the cached value there as well. Rafael, Andy and Darren suggest performing the DMI check in arch code and making it available with a header in include/linux/platform_data/x86/. To this end, add early_platform_quirks() to arch/x86/kernel/quirks.c to perform the DMI check and invoke it from setup_arch(). Switch over all existing Apple DMI checks, thereby fixing two deficiencies: * They are now #defined to false on non-x86 arches and can thus be optimized away if they're located in cross-arch code. * Some of them only match "Apple Inc." but not "Apple Computer, Inc.", which is used by BIOSes released between January 2006 (when the first x86 Macs started shipping) and January 2007 (when the company name changed upon introduction of the iPhone). Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Suggested-by: Darren Hart <dvhart@infradead.org> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01 14:10:41 +02:00
PCI/DPC: Add Error Disconnect Recover (EDR) support Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to notify OSPM that a device has been disconnected due to an error condition (ACPI v6.3, sec 5.6.6). OSPM advertises its support for EDR on PCI devices via _OSC (see [1], sec 4.5.1, table 4-4). The OSPM EDR notify handler should invalidate software state associated with disconnected devices and may attempt to recover them. OSPM communicates the status of recovery to the firmware via _OST (sec 6.3.5.2). For PCIe, firmware may use Downstream Port Containment (DPC) to support EDR. Per [1], sec 4.5.1, table 4-6, even if firmware has retained control of DPC, OSPM may read/write DPC control and status registers during the EDR notification processing window, i.e., from the time it receives an EDR notification until it clears the DPC Trigger Status. Note that per [1], sec 4.5.1 and 4.5.2.4, 1. If the OS supports EDR, it should advertise that to firmware by setting OSC_PCI_EDR_SUPPORT in _OSC Support. 2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in _OSC Support. Add an EDR notify handler to attempt recovery. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 [bhelgaas: squash add/enable patches into one] Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org>
2020-03-23 17:26:07 -07:00
PCI/DPC: Add Error Disconnect Recover (EDR) support Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to notify OSPM that a device has been disconnected due to an error condition (ACPI v6.3, sec 5.6.6). OSPM advertises its support for EDR on PCI devices via _OSC (see [1], sec 4.5.1, table 4-4). The OSPM EDR notify handler should invalidate software state associated with disconnected devices and may attempt to recover them. OSPM communicates the status of recovery to the firmware via _OST (sec 6.3.5.2). For PCIe, firmware may use Downstream Port Containment (DPC) to support EDR. Per [1], sec 4.5.1, table 4-6, even if firmware has retained control of DPC, OSPM may read/write DPC control and status registers during the EDR notification processing window, i.e., from the time it receives an EDR notification until it clears the DPC Trigger Status. Note that per [1], sec 4.5.1 and 4.5.2.4, 1. If the OS supports EDR, it should advertise that to firmware by setting OSC_PCI_EDR_SUPPORT in _OSC Support. 2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in _OSC Support. Add an EDR notify handler to attempt recovery. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 [bhelgaas: squash add/enable patches into one] Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org>
2020-03-23 17:26:07 -07:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
ACPI/PCI: Do not preserve _OSC control bits returned by a query There is the assumption in acpi_pci_osc_control_set() that it is always sufficient to compare the mask of _OSC control bits to be requested with the result of an _OSC query where all of the known control bits have been checked. However, in general, that need not be the case. For example, if an _OSC feature A depends on an _OSC feature B and control of A, B plus another _OSC feature C is requested simultaneously, the BIOS may return A, B, C, while it would only return C if A and C were requested without B. That may result in passing a wrong mask of _OSC control bits to an _OSC control request, in which case the BIOS may only grant control of a subset of the requested features. Moreover, acpi_pci_run_osc() will return error code if that happens and the caller of acpi_pci_osc_control_set() will not know that it's been granted control of some _OSC features. Consequently, the system will generally not work as expected. Apart from this acpi_pci_osc_control_set() always uses the mask of _OSC control bits returned by the very first invocation of acpi_pci_query_osc(), but that is done with the second argument equal to OSC_PCI_SEGMENT_GROUPS_SUPPORT which generally happens to affect the returned _OSC control bits. For these reasons, make acpi_pci_osc_control_set() always check if control of the requested _OSC features will be granted before making the final control request. As a result, the osc_control_qry and osc_queried members of struct acpi_pci_root are not necessary any more, so drop them and remove the remaining code referring to them. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-23 23:55:59 +02:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
ACPI: Support _OSI("Darwin") correctly Apple hardware queries _OSI("Darwin") in order to determine whether the system is running OS X, and changes firmware behaviour based on the answer. The most obvious difference in behaviour is that Thunderbolt hardware is forcibly powered down unless the system is running OS X. The obvious solution would be to simply add Darwin to the list of supported _OSI strings, but this causes problems. Recent Apple hardware includes two separate methods for checking _OSI strings. The first will check whether Darwin is supported, and if so will exit. The second will check whether Darwin is supported, but will then continue to check for further operating systems. If a further operating system is found then later firmware code will assume that the OS is not OS X. This results in the unfortunate situation where the Thunderbolt controller is available at boot time but remains powered down after suspend. The easiest way to handle this is to special-case it in the Linux-specific OSI handling code. If we see Darwin, we should answer true and then disable all other _OSI vendor strings. The next problem is that the Apple PCI _OSC method has the following code: if (LEqual (0x01, OSDW ())) if (LAnd (LEqual (Arg0, GUID), NEXP) (do stuff) else (fail) NEXP is a value in high memory and is presumably under the control of the firmware. No methods sets it. The methods that are called in the "do stuff" path are dummies. Unless there's some additional firmware call in early boot, there's no way for this call to succeed - and even if it does, it doesn't do anything. The easiest way to handle this is simply to ignore it. We know which flags would be set, so just set them by hand if the platform is running in Darwin mode. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> [andreas.noever@gmail.com: merged two patches, do not touch ACPICA] Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-20 13:19:47 +02:00
treewide: Consolidate Apple DMI checks We're about to amend ACPI bus scan with DMI checks whether we're running on a Mac to support Apple device properties in AML. The DMI checks are performed for every single device, adding overhead for everything x86 that isn't Apple, which is the majority. Rafael and Andy therefore request to perform the DMI match only once and cache the result. Outside of ACPI various other Apple DMI checks exist and it seems reasonable to use the cached value there as well. Rafael, Andy and Darren suggest performing the DMI check in arch code and making it available with a header in include/linux/platform_data/x86/. To this end, add early_platform_quirks() to arch/x86/kernel/quirks.c to perform the DMI check and invoke it from setup_arch(). Switch over all existing Apple DMI checks, thereby fixing two deficiencies: * They are now #defined to false on non-x86 arches and can thus be optimized away if they're located in cross-arch code. * Some of them only match "Apple Inc." but not "Apple Computer, Inc.", which is used by BIOSes released between January 2006 (when the first x86 Macs started shipping) and January 2007 (when the company name changed upon introduction of the iPhone). Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Suggested-by: Darren Hart <dvhart@infradead.org> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-01 14:10:41 +02:00
ACPI: Support _OSI("Darwin") correctly Apple hardware queries _OSI("Darwin") in order to determine whether the system is running OS X, and changes firmware behaviour based on the answer. The most obvious difference in behaviour is that Thunderbolt hardware is forcibly powered down unless the system is running OS X. The obvious solution would be to simply add Darwin to the list of supported _OSI strings, but this causes problems. Recent Apple hardware includes two separate methods for checking _OSI strings. The first will check whether Darwin is supported, and if so will exit. The second will check whether Darwin is supported, but will then continue to check for further operating systems. If a further operating system is found then later firmware code will assume that the OS is not OS X. This results in the unfortunate situation where the Thunderbolt controller is available at boot time but remains powered down after suspend. The easiest way to handle this is to special-case it in the Linux-specific OSI handling code. If we see Darwin, we should answer true and then disable all other _OSI vendor strings. The next problem is that the Apple PCI _OSC method has the following code: if (LEqual (0x01, OSDW ())) if (LAnd (LEqual (Arg0, GUID), NEXP) (do stuff) else (fail) NEXP is a value in high memory and is presumably under the control of the firmware. No methods sets it. The methods that are called in the "do stuff" path are dummies. Unless there's some additional firmware call in early boot, there's no way for this call to succeed - and even if it does, it doesn't do anything. The easiest way to handle this is simply to ignore it. We know which flags would be set, so just set them by hand if the platform is running in Darwin mode. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> [andreas.noever@gmail.com: merged two patches, do not touch ACPICA] Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-20 13:19:47 +02:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: negotiate CXL _OSC Add full support for negotiating _OSC as defined in the CXL 2.0 spec, as applicable to CXL-enabled platforms. Advertise support for the CXL features we support - 'CXL 2.0 port/device register access', 'Protocol Error Reporting', and 'CXL Native Hot Plug'. Request control for 'CXL Memory Error Reporting'. The requests are dependent on CONFIG_* based prerequisites, and prior PCI enabling, similar to how the standard PCI _OSC bits are determined. The CXL specification does not define any additional constraints on the hotplug flow beyond PCIe native hotplug, so a kernel that supports native PCIe hotplug, supports CXL hotplug. For error handling protocol and link errors just use PCIe AER. There is nascent support for amending AER events with CXL specific status [1], but there's otherwise no additional OS responsibility for CXL errors beyond PCIe AER. CXL Memory Errors behave the same as typical memory errors so CONFIG_MEMORY_FAILURE is sufficient to indicate support to platform firmware. [1]: https://lore.kernel.org/linux-cxl/164740402242.3912056.8303625392871313860.stgit@dwillia2-desk3.amr.corp.intel.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220413073618.291335-4-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-04-13 01:36:18 -06:00
PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available This fixes the problem of acpiphp claiming slots that should be managed by pciehp, which may keep ExpressCard slots from working. The acpiphp driver claims PCIe slots unless the BIOS has granted us control of PCIe native hotplug via _OSC. Prior to v3.10, the acpiphp .add method (add_bridge()) was always called *after* we had requested native hotplug control with _OSC. But after 3b63aaa70e ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism"), which appeared in v3.10, acpiphp initialization is done during the bus scan via the pcibios_add_bus() hook, and this happens *before* we request native hotplug control. Therefore, acpiphp doesn't know yet whether the BIOS will grant control, and it claims slots that we should be handling with native hotplug. This patch requests native hotplug control earlier, so we know whether the BIOS granted it to us before we initialize acpiphp. To avoid reintroducing the ASPM issue fixed by b8178f130e ('Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"'), we run _OSC earlier but defer the actual ASPM calls until after the bus scan is complete. Tested successfully by myself. [bhelgaas: changelog, mark for stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60736 Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.10+ CC: Len Brown <lenb@kernel.org> CC: "Rafael J. Wysocki" <rjw@sisk.pl>
2013-08-29 16:17:05 -04:00
PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available This fixes the problem of acpiphp claiming slots that should be managed by pciehp, which may keep ExpressCard slots from working. The acpiphp driver claims PCIe slots unless the BIOS has granted us control of PCIe native hotplug via _OSC. Prior to v3.10, the acpiphp .add method (add_bridge()) was always called *after* we had requested native hotplug control with _OSC. But after 3b63aaa70e ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism"), which appeared in v3.10, acpiphp initialization is done during the bus scan via the pcibios_add_bus() hook, and this happens *before* we request native hotplug control. Therefore, acpiphp doesn't know yet whether the BIOS will grant control, and it claims slots that we should be handling with native hotplug. This patch requests native hotplug control earlier, so we know whether the BIOS granted it to us before we initialize acpiphp. To avoid reintroducing the ASPM issue fixed by b8178f130e ('Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"'), we run _OSC earlier but defer the actual ASPM calls until after the bus scan is complete. Tested successfully by myself. [bhelgaas: changelog, mark for stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60736 Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.10+ CC: Len Brown <lenb@kernel.org> CC: "Rafael J. Wysocki" <rjw@sisk.pl>
2013-08-29 16:17:05 -04:00
PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available This fixes the problem of acpiphp claiming slots that should be managed by pciehp, which may keep ExpressCard slots from working. The acpiphp driver claims PCIe slots unless the BIOS has granted us control of PCIe native hotplug via _OSC. Prior to v3.10, the acpiphp .add method (add_bridge()) was always called *after* we had requested native hotplug control with _OSC. But after 3b63aaa70e ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism"), which appeared in v3.10, acpiphp initialization is done during the bus scan via the pcibios_add_bus() hook, and this happens *before* we request native hotplug control. Therefore, acpiphp doesn't know yet whether the BIOS will grant control, and it claims slots that we should be handling with native hotplug. This patch requests native hotplug control earlier, so we know whether the BIOS granted it to us before we initialize acpiphp. To avoid reintroducing the ASPM issue fixed by b8178f130e ('Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"'), we run _OSC earlier but defer the actual ASPM calls until after the bus scan is complete. Tested successfully by myself. [bhelgaas: changelog, mark for stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60736 Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.10+ CC: Len Brown <lenb@kernel.org> CC: "Rafael J. Wysocki" <rjw@sisk.pl>
2013-08-29 16:17:05 -04:00
PCI / ACPI / PM: Platform support for PCI PME wake-up Although the majority of PCI devices can generate PMEs that in principle may be used to wake up devices suspended at run time, platform support is generally necessary to convert PMEs into wake-up events that can be delivered to the kernel. If ACPI is used for this purpose, PME signals generated by a PCI device will trigger the ACPI GPE associated with the device to generate an ACPI wake-up event that we can set up a handler for, provided that everything is configured correctly. Unfortunately, the subset of PCI devices that have GPEs associated with them is quite limited. The devices without dedicated GPEs have to rely on the GPEs associated with other devices (in the majority of cases their upstream bridges and, possibly, the root bridge) to generate ACPI wake-up events in response to PME signals from them. Add ACPI platform support for PCI PME wake-up: o Add a framework making is possible to use ACPI system notify handlers for run-time PM. o Add new PCI platform callback ->run_wake() to struct pci_platform_pm_ops allowing us to enable/disable the platform to generate wake-up events for given device. Implemet this callback for the ACPI platform. o Define ACPI wake-up handlers for PCI devices and PCI root buses and make the PCI-ACPI binding code register wake-up notifiers for all PCI devices present in the ACPI tables. o Add function pci_dev_run_wake() which can be used by PCI drivers to check if given device is capable of generating wake-up events at run time. Developed in cooperation with Matthew Garrett <mjg@redhat.com>. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-17 23:44:09 +01:00
PCI / ACPI / PM: Platform support for PCI PME wake-up Although the majority of PCI devices can generate PMEs that in principle may be used to wake up devices suspended at run time, platform support is generally necessary to convert PMEs into wake-up events that can be delivered to the kernel. If ACPI is used for this purpose, PME signals generated by a PCI device will trigger the ACPI GPE associated with the device to generate an ACPI wake-up event that we can set up a handler for, provided that everything is configured correctly. Unfortunately, the subset of PCI devices that have GPEs associated with them is quite limited. The devices without dedicated GPEs have to rely on the GPEs associated with other devices (in the majority of cases their upstream bridges and, possibly, the root bridge) to generate ACPI wake-up events in response to PME signals from them. Add ACPI platform support for PCI PME wake-up: o Add a framework making is possible to use ACPI system notify handlers for run-time PM. o Add new PCI platform callback ->run_wake() to struct pci_platform_pm_ops allowing us to enable/disable the platform to generate wake-up events for given device. Implemet this callback for the ACPI platform. o Define ACPI wake-up handlers for PCI devices and PCI root buses and make the PCI-ACPI binding code register wake-up notifiers for all PCI devices present in the ACPI tables. o Add function pci_dev_run_wake() which can be used by PCI drivers to check if given device is capable of generating wake-up events at run time. Developed in cooperation with Matthew Garrett <mjg@redhat.com>. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-17 23:44:09 +01:00
PCI/DPC: Add Error Disconnect Recover (EDR) support Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to notify OSPM that a device has been disconnected due to an error condition (ACPI v6.3, sec 5.6.6). OSPM advertises its support for EDR on PCI devices via _OSC (see [1], sec 4.5.1, table 4-4). The OSPM EDR notify handler should invalidate software state associated with disconnected devices and may attempt to recover them. OSPM communicates the status of recovery to the firmware via _OST (sec 6.3.5.2). For PCIe, firmware may use Downstream Port Containment (DPC) to support EDR. Per [1], sec 4.5.1, table 4-6, even if firmware has retained control of DPC, OSPM may read/write DPC control and status registers during the EDR notification processing window, i.e., from the time it receives an EDR notification until it clears the DPC Trigger Status. Note that per [1], sec 4.5.1 and 4.5.2.4, 1. If the OS supports EDR, it should advertise that to firmware by setting OSC_PCI_EDR_SUPPORT in _OSC Support. 2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in _OSC Support. Add an EDR notify handler to attempt recovery. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 [bhelgaas: squash add/enable patches into one] Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org>
2020-03-23 17:26:07 -07:00