linux/drivers/clk/clk.c

5586 lines
139 KiB

clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Use hashtable for global clk lookups A clk lookup using clk_core_lookup() is currently somewhat expensive since it has to walk the whole clk tree to find a match. This is extremely bad in the clk_core_init() function where it is used to look for clk name conflicts, which is always the worst case of walking the whole tree. Moreover, the number of clks checked increases as more clks are registered, causing each subsequent clk registration becoming slower. Add a hashtable for doing clk lookups to replace the tree walk method. On arm64 this increases kernel memory usage by 4 KB for the hashtable, and 16 bytes (2 pointers) for |struct hlist_node| in each clk. On a platform with around 800 clks, this reduces the time spent in clk_core_lookup() significantly: | PID 0 | kworker | | before | after | before | after | ------------------------------------------- avg | 203 us | 2.7 us | 123 us | 1.5 us | ------------------------------------------- min | 4.7 us | 2.3 us | 102 us | 0.9 us | ------------------------------------------- max | 867 us | 4.8 us | 237 us | 3.5 us | ------------------------------------------- culm | 109 ms | 1.5 ms | 21 ms | 0.3 ms | This in turn reduces the time spent in clk_hw_register(), and ultimately, boot time. On a different system with close to 700 clks, This reduces boot time by around 110 ms. While this doesn't seem like a lot, this helps in cases where minimizing boot time is important. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-08-14 11:53:16 +08:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: allow reentrant calls into the clk framework Reentrancy into the clock framework is necessary for clock operations that result in nested calls to the clk api. A common example is a clock that is prepared via an i2c transaction, such as a clock inside of a discrete audio chip or a power management IC. The i2c subsystem itself will use the clk api resulting in a deadlock: clk_prepare(audio_clk) i2c_transfer(..) clk_prepare(i2c_controller_clk) The ability to reenter the clock framework prevents this deadlock. Other use cases exist such as allowing .set_rate callbacks to call clk_set_parent to achieve the best rate, or to save power in certain configurations. Yet another example is performing pinctrl operations from a clk_ops callback. Calls into the pinctrl subsystem may call clk_{un}prepare on an unrelated clock. Allowing for nested calls to reenter the clock framework enables both of these use cases. Reentrancy is implemented by two global pointers that track the owner currently holding a global lock. One pointer tracks the owner during sleepable, mutex-protected operations and the other one tracks the owner during non-interruptible, spinlock-protected operations. When the clk framework is entered we try to hold the global lock. If it is held we compare the current task against the current owner; a match implies a nested call and we reenter. If the values do not match then we block on the lock until it is released. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-03-28 13:59:02 -07:00
clk: Use hashtable for global clk lookups A clk lookup using clk_core_lookup() is currently somewhat expensive since it has to walk the whole clk tree to find a match. This is extremely bad in the clk_core_init() function where it is used to look for clk name conflicts, which is always the worst case of walking the whole tree. Moreover, the number of clks checked increases as more clks are registered, causing each subsequent clk registration becoming slower. Add a hashtable for doing clk lookups to replace the tree walk method. On arm64 this increases kernel memory usage by 4 KB for the hashtable, and 16 bytes (2 pointers) for |struct hlist_node| in each clk. On a platform with around 800 clks, this reduces the time spent in clk_core_lookup() significantly: | PID 0 | kworker | | before | after | before | after | ------------------------------------------- avg | 203 us | 2.7 us | 123 us | 1.5 us | ------------------------------------------- min | 4.7 us | 2.3 us | 102 us | 0.9 us | ------------------------------------------- max | 867 us | 4.8 us | 237 us | 3.5 us | ------------------------------------------- culm | 109 ms | 1.5 ms | 21 ms | 0.3 ms | This in turn reduces the time spent in clk_hw_register(), and ultimately, boot time. On a different system with close to 700 clks, This reduces boot time by around 110 ms. While this doesn't seem like a lot, this helps in cases where minimizing boot time is important. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-08-14 11:53:16 +08:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: allow reentrant calls into the clk framework Reentrancy into the clock framework is necessary for clock operations that result in nested calls to the clk api. A common example is a clock that is prepared via an i2c transaction, such as a clock inside of a discrete audio chip or a power management IC. The i2c subsystem itself will use the clk api resulting in a deadlock: clk_prepare(audio_clk) i2c_transfer(..) clk_prepare(i2c_controller_clk) The ability to reenter the clock framework prevents this deadlock. Other use cases exist such as allowing .set_rate callbacks to call clk_set_parent to achieve the best rate, or to save power in certain configurations. Yet another example is performing pinctrl operations from a clk_ops callback. Calls into the pinctrl subsystem may call clk_{un}prepare on an unrelated clock. Allowing for nested calls to reenter the clock framework enables both of these use cases. Reentrancy is implemented by two global pointers that track the owner currently holding a global lock. One pointer tracks the owner during sleepable, mutex-protected operations and the other one tracks the owner during non-interruptible, spinlock-protected operations. When the clk framework is entered we try to hold the global lock. If it is held we compare the current task against the current owner; a match implies a nested call and we reenter. If the values do not match then we block on the lock until it is released. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-03-28 13:59:02 -07:00
clk: Use hashtable for global clk lookups A clk lookup using clk_core_lookup() is currently somewhat expensive since it has to walk the whole clk tree to find a match. This is extremely bad in the clk_core_init() function where it is used to look for clk name conflicts, which is always the worst case of walking the whole tree. Moreover, the number of clks checked increases as more clks are registered, causing each subsequent clk registration becoming slower. Add a hashtable for doing clk lookups to replace the tree walk method. On arm64 this increases kernel memory usage by 4 KB for the hashtable, and 16 bytes (2 pointers) for |struct hlist_node| in each clk. On a platform with around 800 clks, this reduces the time spent in clk_core_lookup() significantly: | PID 0 | kworker | | before | after | before | after | ------------------------------------------- avg | 203 us | 2.7 us | 123 us | 1.5 us | ------------------------------------------- min | 4.7 us | 2.3 us | 102 us | 0.9 us | ------------------------------------------- max | 867 us | 4.8 us | 237 us | 3.5 us | ------------------------------------------- culm | 109 ms | 1.5 ms | 21 ms | 0.3 ms | This in turn reduces the time spent in clk_hw_register(), and ultimately, boot time. On a different system with close to 700 clks, This reduces boot time by around 110 ms. While this doesn't seem like a lot, this helps in cases where minimizing boot time is important. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-08-14 11:53:16 +08:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be triggered more easily by simply booting on Qualcomm sc7180. Introduce a list of clk_core structures that have been registered, or are in the process of being registered, that require runtime PM to operate. Iterate this list and call clk_pm_runtime_get() on each of them without holding the prepare_lock during clk_disable_unused(). This way we can be certain that the runtime PM state of the devices will be active and resumed so we can't schedule away while walking the clk tree with the prepare_lock held. Similarly, call clk_pm_runtime_put() without the prepare_lock held to properly drop the runtime PM reference. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. Reported-by: Douglas Anderson <dianders@chromium.org> Closes: https://lore.kernel.org/all/20220922084322.RFC.2.I375b6b9e0a0a5348962f004beb3dafee6a12dfbb@changeid/ [1] Closes: https://issuetracker.google.com/328070191 Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240325184204.745706-5-sboyd@kernel.org Reviewed-by: Douglas Anderson <dianders@chromium.org>
2024-03-25 11:41:58 -07:00
clk: Evict unregistered clks from parent caches We leave a dangling pointer in each clk_core::parents array that has an unregistered clk as a potential parent when that clk_core pointer is freed by clk{_hw}_unregister(). It is impossible for the true parent of a clk to be set with clk_set_parent() once the dangling pointer is left in the cache because we compare parent pointers in clk_fetch_parent_index() instead of checking for a matching clk name or clk_hw pointer. Before commit ede77858473a ("clk: Remove global clk traversal on fetch parent index"), we would check clk_hw pointers, which has a higher chance of being the same between registration and unregistration, but it can still be allocated and freed by the clk provider. In fact, this has been a long standing problem since commit da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()") where we stopped trying to compare clk names and skipped over entries in the cache that weren't NULL. There are good (performance) reasons to not do the global tree lookup in cases where the cache holds dangling pointers to parents that have been unregistered. Let's take the performance hit on the uncommon registration path instead. Loop through all the clk_core::parents arrays when a clk is unregistered and set the entry to NULL when the parent cache entry and clk being unregistered are the same pointer. This will fix this problem and avoid the overhead for the "normal" case. Based on a patch by Bjorn Andersson. Fixes: da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190828181959.204401-1-sboyd@kernel.org
2019-08-28 11:19:59 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be triggered more easily by simply booting on Qualcomm sc7180. Introduce a list of clk_core structures that have been registered, or are in the process of being registered, that require runtime PM to operate. Iterate this list and call clk_pm_runtime_get() on each of them without holding the prepare_lock during clk_disable_unused(). This way we can be certain that the runtime PM state of the devices will be active and resumed so we can't schedule away while walking the clk tree with the prepare_lock held. Similarly, call clk_pm_runtime_put() without the prepare_lock held to properly drop the runtime PM reference. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. Reported-by: Douglas Anderson <dianders@chromium.org> Closes: https://lore.kernel.org/all/20220922084322.RFC.2.I375b6b9e0a0a5348962f004beb3dafee6a12dfbb@changeid/ [1] Closes: https://issuetracker.google.com/328070191 Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240325184204.745706-5-sboyd@kernel.org Reviewed-by: Douglas Anderson <dianders@chromium.org>
2024-03-25 11:41:58 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: track the orphan status of clocks and their children While children of orphan clocks are not carried in the orphan-list itself, they're nevertheless orphans in their own right as they also don't have an input-rate available. To ease tracking if a clock is an orphan or has an orphan in its parent path introduce an orphan field into struct clk and update it and the fields in child-clocks when a clock gets added or removed from the orphan-list. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Alex Elder <elder@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: kernel@pengutronix.de Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Chao Xie <chao.xie@marvell.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Georgi Djakov <georgi.djakov@linaro.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Barry Song <baohua@kernel.org> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com> Cc: emilio@elopez.com.ar Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Michal Simek <michal.simek@xilinx.com> [sboyd@codeaurora.org: s/clk/core/ in new function] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-22 22:53:05 +02:00
clk: Use hashtable for global clk lookups A clk lookup using clk_core_lookup() is currently somewhat expensive since it has to walk the whole clk tree to find a match. This is extremely bad in the clk_core_init() function where it is used to look for clk name conflicts, which is always the worst case of walking the whole tree. Moreover, the number of clks checked increases as more clks are registered, causing each subsequent clk registration becoming slower. Add a hashtable for doing clk lookups to replace the tree walk method. On arm64 this increases kernel memory usage by 4 KB for the hashtable, and 16 bytes (2 pointers) for |struct hlist_node| in each clk. On a platform with around 800 clks, this reduces the time spent in clk_core_lookup() significantly: | PID 0 | kworker | | before | after | before | after | ------------------------------------------- avg | 203 us | 2.7 us | 123 us | 1.5 us | ------------------------------------------- min | 4.7 us | 2.3 us | 102 us | 0.9 us | ------------------------------------------- max | 867 us | 4.8 us | 237 us | 3.5 us | ------------------------------------------- culm | 109 ms | 1.5 ms | 21 ms | 0.3 ms | This in turn reduces the time spent in clk_hw_register(), and ultimately, boot time. On a different system with close to 700 clks, This reduces boot time by around 110 ms. While this doesn't seem like a lot, this helps in cases where minimizing boot time is important. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-08-14 11:53:16 +08:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be triggered more easily by simply booting on Qualcomm sc7180. Introduce a list of clk_core structures that have been registered, or are in the process of being registered, that require runtime PM to operate. Iterate this list and call clk_pm_runtime_get() on each of them without holding the prepare_lock during clk_disable_unused(). This way we can be certain that the runtime PM state of the devices will be active and resumed so we can't schedule away while walking the clk tree with the prepare_lock held. Similarly, call clk_pm_runtime_put() without the prepare_lock held to properly drop the runtime PM reference. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. Reported-by: Douglas Anderson <dianders@chromium.org> Closes: https://lore.kernel.org/all/20220922084322.RFC.2.I375b6b9e0a0a5348962f004beb3dafee6a12dfbb@changeid/ [1] Closes: https://issuetracker.google.com/328070191 Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240325184204.745706-5-sboyd@kernel.org Reviewed-by: Douglas Anderson <dianders@chromium.org>
2024-03-25 11:41:58 -07:00
clk: allow reentrant calls into the clk framework Reentrancy into the clock framework is necessary for clock operations that result in nested calls to the clk api. A common example is a clock that is prepared via an i2c transaction, such as a clock inside of a discrete audio chip or a power management IC. The i2c subsystem itself will use the clk api resulting in a deadlock: clk_prepare(audio_clk) i2c_transfer(..) clk_prepare(i2c_controller_clk) The ability to reenter the clock framework prevents this deadlock. Other use cases exist such as allowing .set_rate callbacks to call clk_set_parent to achieve the best rate, or to save power in certain configurations. Yet another example is performing pinctrl operations from a clk_ops callback. Calls into the pinctrl subsystem may call clk_{un}prepare on an unrelated clock. Allowing for nested calls to reenter the clock framework enables both of these use cases. Reentrancy is implemented by two global pointers that track the owner currently holding a global lock. One pointer tracks the owner during sleepable, mutex-protected operations and the other one tracks the owner during non-interruptible, spinlock-protected operations. When the clk framework is entered we try to hold the global lock. If it is held we compare the current task against the current owner; a match implies a nested call and we reenter. If the values do not match then we block on the lock until it is released. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-03-28 13:59:02 -07:00
clk: allow reentrant calls into the clk framework Reentrancy into the clock framework is necessary for clock operations that result in nested calls to the clk api. A common example is a clock that is prepared via an i2c transaction, such as a clock inside of a discrete audio chip or a power management IC. The i2c subsystem itself will use the clk api resulting in a deadlock: clk_prepare(audio_clk) i2c_transfer(..) clk_prepare(i2c_controller_clk) The ability to reenter the clock framework prevents this deadlock. Other use cases exist such as allowing .set_rate callbacks to call clk_set_parent to achieve the best rate, or to save power in certain configurations. Yet another example is performing pinctrl operations from a clk_ops callback. Calls into the pinctrl subsystem may call clk_{un}prepare on an unrelated clock. Allowing for nested calls to reenter the clock framework enables both of these use cases. Reentrancy is implemented by two global pointers that track the owner currently holding a global lock. One pointer tracks the owner during sleepable, mutex-protected operations and the other one tracks the owner during non-interruptible, spinlock-protected operations. When the clk framework is entered we try to hold the global lock. If it is held we compare the current task against the current owner; a match implies a nested call and we reenter. If the values do not match then we block on the lock until it is released. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-03-28 13:59:02 -07:00
clk: allow reentrant calls into the clk framework Reentrancy into the clock framework is necessary for clock operations that result in nested calls to the clk api. A common example is a clock that is prepared via an i2c transaction, such as a clock inside of a discrete audio chip or a power management IC. The i2c subsystem itself will use the clk api resulting in a deadlock: clk_prepare(audio_clk) i2c_transfer(..) clk_prepare(i2c_controller_clk) The ability to reenter the clock framework prevents this deadlock. Other use cases exist such as allowing .set_rate callbacks to call clk_set_parent to achieve the best rate, or to save power in certain configurations. Yet another example is performing pinctrl operations from a clk_ops callback. Calls into the pinctrl subsystem may call clk_{un}prepare on an unrelated clock. Allowing for nested calls to reenter the clock framework enables both of these use cases. Reentrancy is implemented by two global pointers that track the owner currently holding a global lock. One pointer tracks the owner during sleepable, mutex-protected operations and the other one tracks the owner during non-interruptible, spinlock-protected operations. When the clk framework is entered we try to hold the global lock. If it is held we compare the current task against the current owner; a match implies a nested call and we reenter. If the values do not match then we block on the lock until it is released. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-03-28 13:59:02 -07:00
clk: allow reentrant calls into the clk framework Reentrancy into the clock framework is necessary for clock operations that result in nested calls to the clk api. A common example is a clock that is prepared via an i2c transaction, such as a clock inside of a discrete audio chip or a power management IC. The i2c subsystem itself will use the clk api resulting in a deadlock: clk_prepare(audio_clk) i2c_transfer(..) clk_prepare(i2c_controller_clk) The ability to reenter the clock framework prevents this deadlock. Other use cases exist such as allowing .set_rate callbacks to call clk_set_parent to achieve the best rate, or to save power in certain configurations. Yet another example is performing pinctrl operations from a clk_ops callback. Calls into the pinctrl subsystem may call clk_{un}prepare on an unrelated clock. Allowing for nested calls to reenter the clock framework enables both of these use cases. Reentrancy is implemented by two global pointers that track the owner currently holding a global lock. One pointer tracks the owner during sleepable, mutex-protected operations and the other one tracks the owner during non-interruptible, spinlock-protected operations. When the clk framework is entered we try to hold the global lock. If it is held we compare the current task against the current owner; a match implies a nested call and we reenter. If the values do not match then we block on the lock until it is released. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-03-28 13:59:02 -07:00
clk: allow reentrant calls into the clk framework Reentrancy into the clock framework is necessary for clock operations that result in nested calls to the clk api. A common example is a clock that is prepared via an i2c transaction, such as a clock inside of a discrete audio chip or a power management IC. The i2c subsystem itself will use the clk api resulting in a deadlock: clk_prepare(audio_clk) i2c_transfer(..) clk_prepare(i2c_controller_clk) The ability to reenter the clock framework prevents this deadlock. Other use cases exist such as allowing .set_rate callbacks to call clk_set_parent to achieve the best rate, or to save power in certain configurations. Yet another example is performing pinctrl operations from a clk_ops callback. Calls into the pinctrl subsystem may call clk_{un}prepare on an unrelated clock. Allowing for nested calls to reenter the clock framework enables both of these use cases. Reentrancy is implemented by two global pointers that track the owner currently holding a global lock. One pointer tracks the owner during sleepable, mutex-protected operations and the other one tracks the owner during non-interruptible, spinlock-protected operations. When the clk framework is entered we try to hold the global lock. If it is held we compare the current task against the current owner; a match implies a nested call and we reenter. If the values do not match then we block on the lock until it is released. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-03-28 13:59:02 -07:00
clk: allow reentrant calls into the clk framework Reentrancy into the clock framework is necessary for clock operations that result in nested calls to the clk api. A common example is a clock that is prepared via an i2c transaction, such as a clock inside of a discrete audio chip or a power management IC. The i2c subsystem itself will use the clk api resulting in a deadlock: clk_prepare(audio_clk) i2c_transfer(..) clk_prepare(i2c_controller_clk) The ability to reenter the clock framework prevents this deadlock. Other use cases exist such as allowing .set_rate callbacks to call clk_set_parent to achieve the best rate, or to save power in certain configurations. Yet another example is performing pinctrl operations from a clk_ops callback. Calls into the pinctrl subsystem may call clk_{un}prepare on an unrelated clock. Allowing for nested calls to reenter the clock framework enables both of these use cases. Reentrancy is implemented by two global pointers that track the owner currently holding a global lock. One pointer tracks the owner during sleepable, mutex-protected operations and the other one tracks the owner during non-interruptible, spinlock-protected operations. When the clk framework is entered we try to hold the global lock. If it is held we compare the current task against the current owner; a match implies a nested call and we reenter. If the values do not match then we block on the lock until it is released. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-03-28 13:59:02 -07:00
clk: allow reentrant calls into the clk framework Reentrancy into the clock framework is necessary for clock operations that result in nested calls to the clk api. A common example is a clock that is prepared via an i2c transaction, such as a clock inside of a discrete audio chip or a power management IC. The i2c subsystem itself will use the clk api resulting in a deadlock: clk_prepare(audio_clk) i2c_transfer(..) clk_prepare(i2c_controller_clk) The ability to reenter the clock framework prevents this deadlock. Other use cases exist such as allowing .set_rate callbacks to call clk_set_parent to achieve the best rate, or to save power in certain configurations. Yet another example is performing pinctrl operations from a clk_ops callback. Calls into the pinctrl subsystem may call clk_{un}prepare on an unrelated clock. Allowing for nested calls to reenter the clock framework enables both of these use cases. Reentrancy is implemented by two global pointers that track the owner currently holding a global lock. One pointer tracks the owner during sleepable, mutex-protected operations and the other one tracks the owner during non-interruptible, spinlock-protected operations. When the clk framework is entered we try to hold the global lock. If it is held we compare the current task against the current owner; a match implies a nested call and we reenter. If the values do not match then we block on the lock until it is released. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-03-28 13:59:02 -07:00
clk: allow reentrant calls into the clk framework Reentrancy into the clock framework is necessary for clock operations that result in nested calls to the clk api. A common example is a clock that is prepared via an i2c transaction, such as a clock inside of a discrete audio chip or a power management IC. The i2c subsystem itself will use the clk api resulting in a deadlock: clk_prepare(audio_clk) i2c_transfer(..) clk_prepare(i2c_controller_clk) The ability to reenter the clock framework prevents this deadlock. Other use cases exist such as allowing .set_rate callbacks to call clk_set_parent to achieve the best rate, or to save power in certain configurations. Yet another example is performing pinctrl operations from a clk_ops callback. Calls into the pinctrl subsystem may call clk_{un}prepare on an unrelated clock. Allowing for nested calls to reenter the clock framework enables both of these use cases. Reentrancy is implemented by two global pointers that track the owner currently holding a global lock. One pointer tracks the owner during sleepable, mutex-protected operations and the other one tracks the owner during non-interruptible, spinlock-protected operations. When the clk framework is entered we try to hold the global lock. If it is held we compare the current task against the current owner; a match implies a nested call and we reenter. If the values do not match then we block on the lock until it is released. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2013-03-28 13:59:02 -07:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() In the previous commits that added CLK_OPS_PARENT_ENABLE, support for this flag was only added to rate change operations (rate setting and reparent) and disabling unused subtree. It was not added to the clock gate related operations. Any hardware driver that needs it for these operations will either see bogus results, or worse, hang. This has been seen on MT8192 and MT8195, where the imp_ii2_* clk drivers set this, but dumping debugfs clk_summary would cause it to hang. Prepare parent on prepare and enable parent on enable dependencies are already handled automatically by the core as part of its sequencing. Whether the case for "enable parent on prepare" should be supported by this flag or not is not clear, and thus ignored for now. This change solely fixes the handling of clk_core_is_enabled, i.e. enabling the parent clock when reading the hardware state. Unfortunately clk_core_is_enabled is called in a variety of places, sometimes with the enable clock already held. To avoid deadlocking, the core will ignore readouts and just return false if CLK_OPS_PARENT_ENABLE is set but the parent isn't currently enabled. Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)") Fixes: a4b3518d146f ("clk: core: support clocks which requires parents enable (part 1)") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20230103092330.494102-1-wenst@chromium.org Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-01-03 17:23:30 +08:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Use hashtable for global clk lookups A clk lookup using clk_core_lookup() is currently somewhat expensive since it has to walk the whole clk tree to find a match. This is extremely bad in the clk_core_init() function where it is used to look for clk name conflicts, which is always the worst case of walking the whole tree. Moreover, the number of clks checked increases as more clks are registered, causing each subsequent clk registration becoming slower. Add a hashtable for doing clk lookups to replace the tree walk method. On arm64 this increases kernel memory usage by 4 KB for the hashtable, and 16 bytes (2 pointers) for |struct hlist_node| in each clk. On a platform with around 800 clks, this reduces the time spent in clk_core_lookup() significantly: | PID 0 | kworker | | before | after | before | after | ------------------------------------------- avg | 203 us | 2.7 us | 123 us | 1.5 us | ------------------------------------------- min | 4.7 us | 2.3 us | 102 us | 0.9 us | ------------------------------------------- max | 867 us | 4.8 us | 237 us | 3.5 us | ------------------------------------------- culm | 109 ms | 1.5 ms | 21 ms | 0.3 ms | This in turn reduces the time spent in clk_hw_register(), and ultimately, boot time. On a different system with close to 700 clks, This reduces boot time by around 110 ms. While this doesn't seem like a lot, this helps in cases where minimizing boot time is important. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-08-14 11:53:16 +08:00
clk: Use hashtable for global clk lookups A clk lookup using clk_core_lookup() is currently somewhat expensive since it has to walk the whole clk tree to find a match. This is extremely bad in the clk_core_init() function where it is used to look for clk name conflicts, which is always the worst case of walking the whole tree. Moreover, the number of clks checked increases as more clks are registered, causing each subsequent clk registration becoming slower. Add a hashtable for doing clk lookups to replace the tree walk method. On arm64 this increases kernel memory usage by 4 KB for the hashtable, and 16 bytes (2 pointers) for |struct hlist_node| in each clk. On a platform with around 800 clks, this reduces the time spent in clk_core_lookup() significantly: | PID 0 | kworker | | before | after | before | after | ------------------------------------------- avg | 203 us | 2.7 us | 123 us | 1.5 us | ------------------------------------------- min | 4.7 us | 2.3 us | 102 us | 0.9 us | ------------------------------------------- max | 867 us | 4.8 us | 237 us | 3.5 us | ------------------------------------------- culm | 109 ms | 1.5 ms | 21 ms | 0.3 ms | This in turn reduces the time spent in clk_hw_register(), and ultimately, boot time. On a different system with close to 700 clks, This reduces boot time by around 110 ms. While this doesn't seem like a lot, this helps in cases where minimizing boot time is important. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-08-14 11:53:16 +08:00
clk: Use hashtable for global clk lookups A clk lookup using clk_core_lookup() is currently somewhat expensive since it has to walk the whole clk tree to find a match. This is extremely bad in the clk_core_init() function where it is used to look for clk name conflicts, which is always the worst case of walking the whole tree. Moreover, the number of clks checked increases as more clks are registered, causing each subsequent clk registration becoming slower. Add a hashtable for doing clk lookups to replace the tree walk method. On arm64 this increases kernel memory usage by 4 KB for the hashtable, and 16 bytes (2 pointers) for |struct hlist_node| in each clk. On a platform with around 800 clks, this reduces the time spent in clk_core_lookup() significantly: | PID 0 | kworker | | before | after | before | after | ------------------------------------------- avg | 203 us | 2.7 us | 123 us | 1.5 us | ------------------------------------------- min | 4.7 us | 2.3 us | 102 us | 0.9 us | ------------------------------------------- max | 867 us | 4.8 us | 237 us | 3.5 us | ------------------------------------------- culm | 109 ms | 1.5 ms | 21 ms | 0.3 ms | This in turn reduces the time spent in clk_hw_register(), and ultimately, boot time. On a different system with close to 700 clks, This reduces boot time by around 110 ms. While this doesn't seem like a lot, this helps in cases where minimizing boot time is important. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-08-14 11:53:16 +08:00
clk: Fix falling back to legacy parent string matching Calls to clk_core_get() will return ERR_PTR(-EINVAL) if we've started migrating a clk driver to use the DT based style of specifying parents but we haven't made any DT updates yet. This happens when we pass a non-NULL value as the 'name' argument of of_parse_clkspec(). That function returns -EINVAL in such a situation, instead of -ENOENT like we expected. The return value comes back up to clk_core_fill_parent_index() which proceeds to skip calling clk_core_lookup() because the error pointer isn't equal to -ENOENT, it's -EINVAL. Furthermore, we blindly overwrite the error pointer returned by clk_core_get() with NULL when there isn't a legacy .name member specified in the parent map. This isn't too bad right now because we don't really care to differentiate NULL from an error, but in the future we should only try to do a legacy lookup if we know we might find something. This way DT lookups that fail don't try to lookup based on strings when there isn't any string to match, hiding the error from DT parsing. Fix both these problems so that clk provider drivers can use the new style of parent mapping without having to also update their DT at the same time. This patch is based on an earlier patch from Taniya Das which checked for -EINVAL in addition to -ENOENT return values from clk_core_get(). Fixes: 601b6e93304a ("clk: Allow parents to be specified via clkspec index") Cc: Taniya Das <tdas@codeaurora.org> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Chen-Yu Tsai <wens@csie.org> Reported-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190813214147.34394-1-sboyd@kernel.org Tested-by: Taniya Das <tdas@codeaurora.org>
2019-08-13 14:41:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Fix falling back to legacy parent string matching Calls to clk_core_get() will return ERR_PTR(-EINVAL) if we've started migrating a clk driver to use the DT based style of specifying parents but we haven't made any DT updates yet. This happens when we pass a non-NULL value as the 'name' argument of of_parse_clkspec(). That function returns -EINVAL in such a situation, instead of -ENOENT like we expected. The return value comes back up to clk_core_fill_parent_index() which proceeds to skip calling clk_core_lookup() because the error pointer isn't equal to -ENOENT, it's -EINVAL. Furthermore, we blindly overwrite the error pointer returned by clk_core_get() with NULL when there isn't a legacy .name member specified in the parent map. This isn't too bad right now because we don't really care to differentiate NULL from an error, but in the future we should only try to do a legacy lookup if we know we might find something. This way DT lookups that fail don't try to lookup based on strings when there isn't any string to match, hiding the error from DT parsing. Fix both these problems so that clk provider drivers can use the new style of parent mapping without having to also update their DT at the same time. This patch is based on an earlier patch from Taniya Das which checked for -EINVAL in addition to -ENOENT return values from clk_core_get(). Fixes: 601b6e93304a ("clk: Allow parents to be specified via clkspec index") Cc: Taniya Das <tdas@codeaurora.org> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Chen-Yu Tsai <wens@csie.org> Reported-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190813214147.34394-1-sboyd@kernel.org Tested-by: Taniya Das <tdas@codeaurora.org>
2019-08-13 14:41:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Fix falling back to legacy parent string matching Calls to clk_core_get() will return ERR_PTR(-EINVAL) if we've started migrating a clk driver to use the DT based style of specifying parents but we haven't made any DT updates yet. This happens when we pass a non-NULL value as the 'name' argument of of_parse_clkspec(). That function returns -EINVAL in such a situation, instead of -ENOENT like we expected. The return value comes back up to clk_core_fill_parent_index() which proceeds to skip calling clk_core_lookup() because the error pointer isn't equal to -ENOENT, it's -EINVAL. Furthermore, we blindly overwrite the error pointer returned by clk_core_get() with NULL when there isn't a legacy .name member specified in the parent map. This isn't too bad right now because we don't really care to differentiate NULL from an error, but in the future we should only try to do a legacy lookup if we know we might find something. This way DT lookups that fail don't try to lookup based on strings when there isn't any string to match, hiding the error from DT parsing. Fix both these problems so that clk provider drivers can use the new style of parent mapping without having to also update their DT at the same time. This patch is based on an earlier patch from Taniya Das which checked for -EINVAL in addition to -ENOENT return values from clk_core_get(). Fixes: 601b6e93304a ("clk: Allow parents to be specified via clkspec index") Cc: Taniya Das <tdas@codeaurora.org> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Chen-Yu Tsai <wens@csie.org> Reported-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190813214147.34394-1-sboyd@kernel.org Tested-by: Taniya Das <tdas@codeaurora.org>
2019-08-13 14:41:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Fix falling back to legacy parent string matching Calls to clk_core_get() will return ERR_PTR(-EINVAL) if we've started migrating a clk driver to use the DT based style of specifying parents but we haven't made any DT updates yet. This happens when we pass a non-NULL value as the 'name' argument of of_parse_clkspec(). That function returns -EINVAL in such a situation, instead of -ENOENT like we expected. The return value comes back up to clk_core_fill_parent_index() which proceeds to skip calling clk_core_lookup() because the error pointer isn't equal to -ENOENT, it's -EINVAL. Furthermore, we blindly overwrite the error pointer returned by clk_core_get() with NULL when there isn't a legacy .name member specified in the parent map. This isn't too bad right now because we don't really care to differentiate NULL from an error, but in the future we should only try to do a legacy lookup if we know we might find something. This way DT lookups that fail don't try to lookup based on strings when there isn't any string to match, hiding the error from DT parsing. Fix both these problems so that clk provider drivers can use the new style of parent mapping without having to also update their DT at the same time. This patch is based on an earlier patch from Taniya Das which checked for -EINVAL in addition to -ENOENT return values from clk_core_get(). Fixes: 601b6e93304a ("clk: Allow parents to be specified via clkspec index") Cc: Taniya Das <tdas@codeaurora.org> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Chen-Yu Tsai <wens@csie.org> Reported-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190813214147.34394-1-sboyd@kernel.org Tested-by: Taniya Das <tdas@codeaurora.org>
2019-08-13 14:41:47 -07:00
clk: Fix falling back to legacy parent string matching Calls to clk_core_get() will return ERR_PTR(-EINVAL) if we've started migrating a clk driver to use the DT based style of specifying parents but we haven't made any DT updates yet. This happens when we pass a non-NULL value as the 'name' argument of of_parse_clkspec(). That function returns -EINVAL in such a situation, instead of -ENOENT like we expected. The return value comes back up to clk_core_fill_parent_index() which proceeds to skip calling clk_core_lookup() because the error pointer isn't equal to -ENOENT, it's -EINVAL. Furthermore, we blindly overwrite the error pointer returned by clk_core_get() with NULL when there isn't a legacy .name member specified in the parent map. This isn't too bad right now because we don't really care to differentiate NULL from an error, but in the future we should only try to do a legacy lookup if we know we might find something. This way DT lookups that fail don't try to lookup based on strings when there isn't any string to match, hiding the error from DT parsing. Fix both these problems so that clk provider drivers can use the new style of parent mapping without having to also update their DT at the same time. This patch is based on an earlier patch from Taniya Das which checked for -EINVAL in addition to -ENOENT return values from clk_core_get(). Fixes: 601b6e93304a ("clk: Allow parents to be specified via clkspec index") Cc: Taniya Das <tdas@codeaurora.org> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Chen-Yu Tsai <wens@csie.org> Reported-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190813214147.34394-1-sboyd@kernel.org Tested-by: Taniya Das <tdas@codeaurora.org>
2019-08-13 14:41:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: Move no reparent case into a separate function We'll need to turn the code in clk_mux_determine_rate_flags() to deal with CLK_SET_RATE_NO_REPARENT into a helper clock drivers will be able to use if they don't want to allow reparenting. Cc: Abel Vesa <abelvesa@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: "Andreas Färber" <afaerber@suse.de> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Chen-Yu Tsai <wenst@chromium.org> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: David Lechner <david@lechnology.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Luca Ceresoli <luca.ceresoli@bootlin.com> Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Markus Schneider-Pargmann <msp@baylibre.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Miles Chen <miles.chen@mediatek.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peng Fan <peng.fan@nxp.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-actions@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@vger.kernel.org Cc: linux-phy@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-sunxi@lists.linux.dev Cc: linux-tegra@vger.kernel.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: patches@opensource.cirrus.com Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-3-971d5077e7d2@cerno.tech
2023-05-05 13:25:05 +02:00
clk: Move no reparent case into a separate function We'll need to turn the code in clk_mux_determine_rate_flags() to deal with CLK_SET_RATE_NO_REPARENT into a helper clock drivers will be able to use if they don't want to allow reparenting. Cc: Abel Vesa <abelvesa@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: "Andreas Färber" <afaerber@suse.de> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Chen-Yu Tsai <wenst@chromium.org> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: David Lechner <david@lechnology.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Luca Ceresoli <luca.ceresoli@bootlin.com> Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Markus Schneider-Pargmann <msp@baylibre.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Miles Chen <miles.chen@mediatek.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peng Fan <peng.fan@nxp.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-actions@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@vger.kernel.org Cc: linux-phy@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-sunxi@lists.linux.dev Cc: linux-tegra@vger.kernel.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: patches@opensource.cirrus.com Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-3-971d5077e7d2@cerno.tech
2023-05-05 13:25:05 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: Move no reparent case into a separate function We'll need to turn the code in clk_mux_determine_rate_flags() to deal with CLK_SET_RATE_NO_REPARENT into a helper clock drivers will be able to use if they don't want to allow reparenting. Cc: Abel Vesa <abelvesa@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: "Andreas Färber" <afaerber@suse.de> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Chen-Yu Tsai <wenst@chromium.org> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: David Lechner <david@lechnology.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Luca Ceresoli <luca.ceresoli@bootlin.com> Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Markus Schneider-Pargmann <msp@baylibre.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Miles Chen <miles.chen@mediatek.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peng Fan <peng.fan@nxp.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-actions@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@vger.kernel.org Cc: linux-phy@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-sunxi@lists.linux.dev Cc: linux-tegra@vger.kernel.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: patches@opensource.cirrus.com Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-3-971d5077e7d2@cerno.tech
2023-05-05 13:25:05 +02:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: Move no reparent case into a separate function We'll need to turn the code in clk_mux_determine_rate_flags() to deal with CLK_SET_RATE_NO_REPARENT into a helper clock drivers will be able to use if they don't want to allow reparenting. Cc: Abel Vesa <abelvesa@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: "Andreas Färber" <afaerber@suse.de> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Chen-Yu Tsai <wenst@chromium.org> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: David Lechner <david@lechnology.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Luca Ceresoli <luca.ceresoli@bootlin.com> Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Markus Schneider-Pargmann <msp@baylibre.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Miles Chen <miles.chen@mediatek.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peng Fan <peng.fan@nxp.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-actions@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@vger.kernel.org Cc: linux-phy@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-sunxi@lists.linux.dev Cc: linux-tegra@vger.kernel.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: patches@opensource.cirrus.com Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-3-971d5077e7d2@cerno.tech
2023-05-05 13:25:05 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: Enforce that disjoints limits are invalid If we were to have two users of the same clock, doing something like: clk_set_rate_range(user1, 1000, 2000); clk_set_rate_range(user2, 3000, 4000); The second call would fail with -EINVAL, preventing from getting in a situation where we end up with impossible limits. However, this is never explicitly checked against and enforced, and works by relying on an undocumented behaviour of clk_set_rate(). Indeed, on the first clk_set_rate_range will make sure the current clock rate is within the new range, so it will be between 1000 and 2000Hz. On the second clk_set_rate_range(), it will consider (rightfully), that our current clock is outside of the 3000-4000Hz range, and will call clk_core_set_rate_nolock() to set it to 3000Hz. clk_core_set_rate_nolock() will then call clk_calc_new_rates() that will eventually check that our rate 3000Hz rate is outside the min 3000Hz max 2000Hz range, will bail out, the error will propagate and we'll eventually return -EINVAL. This solely relies on the fact that clk_calc_new_rates(), and in particular clk_core_determine_round_nolock(), won't modify the new rate allowing the error to be reported. That assumption won't be true for all drivers, and most importantly we'll break that assumption in a later patch. It can also be argued that we shouldn't even reach the point where we're calling clk_core_set_rate_nolock(). Let's make an explicit check for disjoints range before we're doing anything. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-4-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-25 15:35:25 +01:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: Introduce clk_hw_determine_rate_no_reparent() Some clock drivers do not want to allow any reparenting on a given clock, but usually do so by not providing any determine_rate implementation. Whenever we call clk_round_rate() or clk_set_rate(), this leads to clk_core_can_round() returning false and thus the rest of the function either forwarding the rate request to its current parent if CLK_SET_RATE_PARENT is set, or just returning the current clock rate. This behaviour happens implicitly, and as we move forward to making a determine_rate implementation required for muxes, we need some way to explicitly opt-in for that behaviour. Fortunately, this is exactly what the clk_core_determine_rate_no_reparent() function is doing, so we can simply make it available to drivers. Cc: Abel Vesa <abelvesa@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: "Andreas Färber" <afaerber@suse.de> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Chen-Yu Tsai <wenst@chromium.org> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: David Lechner <david@lechnology.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Luca Ceresoli <luca.ceresoli@bootlin.com> Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Markus Schneider-Pargmann <msp@baylibre.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Miles Chen <miles.chen@mediatek.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peng Fan <peng.fan@nxp.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-actions@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@vger.kernel.org Cc: linux-phy@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-sunxi@lists.linux.dev Cc: linux-tegra@vger.kernel.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: patches@opensource.cirrus.com Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-4-971d5077e7d2@cerno.tech | Reported-by: kernel test robot <lkp@intel.com>:
2023-05-05 13:25:06 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
PM: clk: make PM clock layer compatible with clocks that must sleep The clock API splits its interface into sleepable ant atomic contexts: - clk_prepare/clk_unprepare for stuff that might sleep - clk_enable_clk_disable for anything that may be done in atomic context The code handling runtime PM for clocks only calls clk_disable() on suspend requests, and clk_enable on resume requests. This means that runtime PM with clock providers that only have the prepare/unprepare methods implemented is basically useless. Many clock implementations can't accommodate atomic contexts. This is often the case when communication with the clock happens through another subsystem like I2C or SCMI. Let's make the clock PM code useful with such clocks by safely invoking clk_prepare/clk_unprepare upon resume/suspend requests. Of course, when such clocks are registered with the PM layer then pm_runtime_irq_safe() can't be used, and neither pm_runtime_suspend() nor pm_runtime_resume() may be invoked in atomic context. For clocks that do implement the enable and disable methods then everything just works as before. A note on sparse: According to https://lwn.net/Articles/109066/ there are things that sparse can't cope with. In particular, pm_clk_op_lock() and pm_clk_op_unlock() may or may not lock/unlock psd->lock depending on some runtime condition. To work around that we tell it the lock is always untaken for the purpose of static analisys. Thanks to Naresh Kamboju for reporting issues with the initial patch. Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-25 14:29:18 -05:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: core: support clocks which requires parents enable (part 1) On Freescale i.MX7D platform, all clocks operations, including enable/disable, rate change and re-parent, requires its parent clock enable. Current clock core can not support it well. This patch introduce a new flag CLK_OPS_PARENT_ENABLE to handle this special case in clock core that enable its parent clock firstly for each operation and disable it later after operation complete. The patch part 1 fixes the possible disabling clocks while its parent is off during kernel booting phase in clk_disable_unused_subtree(). Before the completion of kernel booting, clock tree is still not built completely, there may be a case that the child clock is on but its parent is off which could be caused by either HW initial reset state or bootloader initialization. Taking bootloader as an example, we may enable all clocks in HW by default. And during kernel booting time, the parent clock could be disabled in its driver probe due to calling clk_prepare_enable and clk_disable_unprepare. Because it's child clock is only enabled in HW while its SW usecount in clock tree is still 0, so clk_disable of parent clock will gate the parent clock in both HW and SW usecount ultimately. Then there will be a child clock is still on in HW but its parent is already off. Later in clk_disable_unused(), this clock disable accessing while its parent off will cause system hang due to the limitation of HW which must require its parent on. This patch simply enables the parent clock first before disabling if flag CLK_OPS_PARENT_ENABLE is set in clk_disable_unused_subtree(). This is a simple solution and only affects booting time. After kernel booting up the clock tree is already created, there will be no case that child is off but its parent is off. So no need do this checking for normal clk_disable() later. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-30 17:31:13 +08:00
clk: core: support clocks which requires parents enable (part 1) On Freescale i.MX7D platform, all clocks operations, including enable/disable, rate change and re-parent, requires its parent clock enable. Current clock core can not support it well. This patch introduce a new flag CLK_OPS_PARENT_ENABLE to handle this special case in clock core that enable its parent clock firstly for each operation and disable it later after operation complete. The patch part 1 fixes the possible disabling clocks while its parent is off during kernel booting phase in clk_disable_unused_subtree(). Before the completion of kernel booting, clock tree is still not built completely, there may be a case that the child clock is on but its parent is off which could be caused by either HW initial reset state or bootloader initialization. Taking bootloader as an example, we may enable all clocks in HW by default. And during kernel booting time, the parent clock could be disabled in its driver probe due to calling clk_prepare_enable and clk_disable_unprepare. Because it's child clock is only enabled in HW while its SW usecount in clock tree is still 0, so clk_disable of parent clock will gate the parent clock in both HW and SW usecount ultimately. Then there will be a child clock is still on in HW but its parent is already off. Later in clk_disable_unused(), this clock disable accessing while its parent off will cause system hang due to the limitation of HW which must require its parent on. This patch simply enables the parent clock first before disabling if flag CLK_OPS_PARENT_ENABLE is set in clk_disable_unused_subtree(). This is a simple solution and only affects booting time. After kernel booting up the clock tree is already created, there will be no case that child is off but its parent is off. So no need do this checking for normal clk_disable() later. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-30 17:31:13 +08:00
clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be triggered more easily by simply booting on Qualcomm sc7180. Introduce a list of clk_core structures that have been registered, or are in the process of being registered, that require runtime PM to operate. Iterate this list and call clk_pm_runtime_get() on each of them without holding the prepare_lock during clk_disable_unused(). This way we can be certain that the runtime PM state of the devices will be active and resumed so we can't schedule away while walking the clk tree with the prepare_lock held. Similarly, call clk_pm_runtime_put() without the prepare_lock held to properly drop the runtime PM reference. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. Reported-by: Douglas Anderson <dianders@chromium.org> Closes: https://lore.kernel.org/all/20220922084322.RFC.2.I375b6b9e0a0a5348962f004beb3dafee6a12dfbb@changeid/ [1] Closes: https://issuetracker.google.com/328070191 Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240325184204.745706-5-sboyd@kernel.org Reviewed-by: Douglas Anderson <dianders@chromium.org>
2024-03-25 11:41:58 -07:00
clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be triggered more easily by simply booting on Qualcomm sc7180. Introduce a list of clk_core structures that have been registered, or are in the process of being registered, that require runtime PM to operate. Iterate this list and call clk_pm_runtime_get() on each of them without holding the prepare_lock during clk_disable_unused(). This way we can be certain that the runtime PM state of the devices will be active and resumed so we can't schedule away while walking the clk tree with the prepare_lock held. Similarly, call clk_pm_runtime_put() without the prepare_lock held to properly drop the runtime PM reference. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. Reported-by: Douglas Anderson <dianders@chromium.org> Closes: https://lore.kernel.org/all/20220922084322.RFC.2.I375b6b9e0a0a5348962f004beb3dafee6a12dfbb@changeid/ [1] Closes: https://issuetracker.google.com/328070191 Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240325184204.745706-5-sboyd@kernel.org Reviewed-by: Douglas Anderson <dianders@chromium.org>
2024-03-25 11:41:58 -07:00
clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be triggered more easily by simply booting on Qualcomm sc7180. Introduce a list of clk_core structures that have been registered, or are in the process of being registered, that require runtime PM to operate. Iterate this list and call clk_pm_runtime_get() on each of them without holding the prepare_lock during clk_disable_unused(). This way we can be certain that the runtime PM state of the devices will be active and resumed so we can't schedule away while walking the clk tree with the prepare_lock held. Similarly, call clk_pm_runtime_put() without the prepare_lock held to properly drop the runtime PM reference. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. Reported-by: Douglas Anderson <dianders@chromium.org> Closes: https://lore.kernel.org/all/20220922084322.RFC.2.I375b6b9e0a0a5348962f004beb3dafee6a12dfbb@changeid/ [1] Closes: https://issuetracker.google.com/328070191 Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240325184204.745706-5-sboyd@kernel.org Reviewed-by: Douglas Anderson <dianders@chromium.org>
2024-03-25 11:41:58 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: Stop forwarding clk_rate_requests to the parent If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:26 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller The clk_rate_request structure is used internally as an argument for the clk_core_determine_round_nolock() and clk_core_round_rate_nolock(). In both cases, the clk_core_init_rate_req() function is used to initialize the clk_rate_request structure. However, the expectation on who gets to call that function is inconsistent between those two functions. Indeed, clk_core_determine_round_nolock() will assume the structure is properly initialized and will just use it. On the other hand, clk_core_round_rate_nolock() will call clk_core_init_rate_req() itself, expecting the caller to have filled only a minimal set of parameters (rate, min_rate and max_rate). If we ignore the calling convention inconsistency, this leads to a second inconsistency for drivers: * If they get called by the framework through clk_core_round_rate_nolock(), the rate, min_rate and max_rate fields will be filled by the caller, and the best_parent_rate and best_parent_hw fields will get filled by clk_core_init_rate_req(). * If they get called by a driver through __clk_determine_rate (and thus clk_core_round_rate_nolock), only best_parent_rate and best_parent_hw are being explicitly set by the framework. Even though we can reasonably expect rate to be set, only one of the 6 in-tree users explicitly set min_rate and max_rate. * If they get called by the framework through clk_core_determine_round_nolock(), then we have two callpaths. Either it will be called by clk_core_round_rate_nolock() itself, or it will be called by clk_calc_new_rates(), which will properly initialize rate, min_rate, max_rate itself, and best_parent_rate and best_parent_hw through clk_core_init_rate_req(). Even though the first and third case seems equivalent, they aren't when the clock has CLK_SET_RATE_PARENT. Indeed, in such a case clk_core_round_rate_nolock() will call itself on the current parent clock with the same clk_rate_request structure. The clk_core_init_rate_req() function will then be called on the parent clock, with the child clk_rate_request pointer and will fill the best_parent_rate and best_parent_hw fields with the parent context. When the whole recursion stops and the call returns, the initial caller will end up with a clk_rate_request structure with some information of the child clock (rate, min_rate, max_rate) and some others of the last clock up the tree whose child had CLK_SET_RATE_PARENT (best_parent_hw, best_parent_rate). In the most common case, best_parent_rate is going to be equal on all the parent clocks so it's not a big deal. However, best_parent_hw is going to point to a clock that never has been a valid parent for that clock which is definitely confusing. In order to fix the calling inconsistency, let's move the clk_core_init_rate_req() calls to the callers, which will also help a bit with the clk_core_round_rate_nolock() recursion. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-16-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:20 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller The clk_rate_request structure is used internally as an argument for the clk_core_determine_round_nolock() and clk_core_round_rate_nolock(). In both cases, the clk_core_init_rate_req() function is used to initialize the clk_rate_request structure. However, the expectation on who gets to call that function is inconsistent between those two functions. Indeed, clk_core_determine_round_nolock() will assume the structure is properly initialized and will just use it. On the other hand, clk_core_round_rate_nolock() will call clk_core_init_rate_req() itself, expecting the caller to have filled only a minimal set of parameters (rate, min_rate and max_rate). If we ignore the calling convention inconsistency, this leads to a second inconsistency for drivers: * If they get called by the framework through clk_core_round_rate_nolock(), the rate, min_rate and max_rate fields will be filled by the caller, and the best_parent_rate and best_parent_hw fields will get filled by clk_core_init_rate_req(). * If they get called by a driver through __clk_determine_rate (and thus clk_core_round_rate_nolock), only best_parent_rate and best_parent_hw are being explicitly set by the framework. Even though we can reasonably expect rate to be set, only one of the 6 in-tree users explicitly set min_rate and max_rate. * If they get called by the framework through clk_core_determine_round_nolock(), then we have two callpaths. Either it will be called by clk_core_round_rate_nolock() itself, or it will be called by clk_calc_new_rates(), which will properly initialize rate, min_rate, max_rate itself, and best_parent_rate and best_parent_hw through clk_core_init_rate_req(). Even though the first and third case seems equivalent, they aren't when the clock has CLK_SET_RATE_PARENT. Indeed, in such a case clk_core_round_rate_nolock() will call itself on the current parent clock with the same clk_rate_request structure. The clk_core_init_rate_req() function will then be called on the parent clock, with the child clk_rate_request pointer and will fill the best_parent_rate and best_parent_hw fields with the parent context. When the whole recursion stops and the call returns, the initial caller will end up with a clk_rate_request structure with some information of the child clock (rate, min_rate, max_rate) and some others of the last clock up the tree whose child had CLK_SET_RATE_PARENT (best_parent_hw, best_parent_rate). In the most common case, best_parent_rate is going to be equal on all the parent clocks so it's not a big deal. However, best_parent_hw is going to point to a clock that never has been a valid parent for that clock which is definitely confusing. In order to fix the calling inconsistency, let's move the clk_core_init_rate_req() calls to the callers, which will also help a bit with the clk_core_round_rate_nolock() recursion. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-16-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:20 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Update req_rate on __clk_recalc_rates() Commit cb1b1dd96241 ("clk: Set req_rate on reparenting") introduced a new function, clk_core_update_orphan_child_rates(), that updates the req_rate field on reparenting. It turns out that that function will interfere with the clock notifying done by __clk_recalc_rates(). This ends up reporting the new rate in both the old_rate and new_rate fields of struct clk_notifier_data. Since clk_core_update_orphan_child_rates() is basically __clk_recalc_rates() without the notifiers, and with the req_rate field update, we can drop clk_core_update_orphan_child_rates() entirely, and make __clk_recalc_rates() update req_rate. However, __clk_recalc_rates() is being called in several code paths: when retrieving a rate (most likely through clk_get_rate()), when changing parents (through clk_set_rate() or clk_hw_reparent()), or when updating the orphan status (through clk_core_reparent_orphans_nolock(), called at registration). Updating req_rate on reparenting or initialisation makes sense, but we shouldn't do it on clk_get_rate(). Thus an extra flag has been added to update or not req_rate depending on the context. Fixes: cb1b1dd96241 ("clk: Set req_rate on reparenting") Link: https://lore.kernel.org/linux-clk/0acc7217-762c-7c0d-45a0-55c384824ce4@samsung.com/ Link: https://lore.kernel.org/linux-clk/Y0QNSx+ZgqKSvPOC@sirena.org.uk/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Mark Brown <broonie@kernel.org> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221010-rpi-clk-fixes-again-v1-1-d87ba82ac404@cerno.tech Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-10 16:47:38 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Update req_rate on __clk_recalc_rates() Commit cb1b1dd96241 ("clk: Set req_rate on reparenting") introduced a new function, clk_core_update_orphan_child_rates(), that updates the req_rate field on reparenting. It turns out that that function will interfere with the clock notifying done by __clk_recalc_rates(). This ends up reporting the new rate in both the old_rate and new_rate fields of struct clk_notifier_data. Since clk_core_update_orphan_child_rates() is basically __clk_recalc_rates() without the notifiers, and with the req_rate field update, we can drop clk_core_update_orphan_child_rates() entirely, and make __clk_recalc_rates() update req_rate. However, __clk_recalc_rates() is being called in several code paths: when retrieving a rate (most likely through clk_get_rate()), when changing parents (through clk_set_rate() or clk_hw_reparent()), or when updating the orphan status (through clk_core_reparent_orphans_nolock(), called at registration). Updating req_rate on reparenting or initialisation makes sense, but we shouldn't do it on clk_get_rate(). Thus an extra flag has been added to update or not req_rate depending on the context. Fixes: cb1b1dd96241 ("clk: Set req_rate on reparenting") Link: https://lore.kernel.org/linux-clk/0acc7217-762c-7c0d-45a0-55c384824ce4@samsung.com/ Link: https://lore.kernel.org/linux-clk/Y0QNSx+ZgqKSvPOC@sirena.org.uk/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Mark Brown <broonie@kernel.org> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221010-rpi-clk-fixes-again-v1-1-d87ba82ac404@cerno.tech Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-10 16:47:38 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Update req_rate on __clk_recalc_rates() Commit cb1b1dd96241 ("clk: Set req_rate on reparenting") introduced a new function, clk_core_update_orphan_child_rates(), that updates the req_rate field on reparenting. It turns out that that function will interfere with the clock notifying done by __clk_recalc_rates(). This ends up reporting the new rate in both the old_rate and new_rate fields of struct clk_notifier_data. Since clk_core_update_orphan_child_rates() is basically __clk_recalc_rates() without the notifiers, and with the req_rate field update, we can drop clk_core_update_orphan_child_rates() entirely, and make __clk_recalc_rates() update req_rate. However, __clk_recalc_rates() is being called in several code paths: when retrieving a rate (most likely through clk_get_rate()), when changing parents (through clk_set_rate() or clk_hw_reparent()), or when updating the orphan status (through clk_core_reparent_orphans_nolock(), called at registration). Updating req_rate on reparenting or initialisation makes sense, but we shouldn't do it on clk_get_rate(). Thus an extra flag has been added to update or not req_rate depending on the context. Fixes: cb1b1dd96241 ("clk: Set req_rate on reparenting") Link: https://lore.kernel.org/linux-clk/0acc7217-762c-7c0d-45a0-55c384824ce4@samsung.com/ Link: https://lore.kernel.org/linux-clk/Y0QNSx+ZgqKSvPOC@sirena.org.uk/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Mark Brown <broonie@kernel.org> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221010-rpi-clk-fixes-again-v1-1-d87ba82ac404@cerno.tech Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-10 16:47:38 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Update req_rate on __clk_recalc_rates() Commit cb1b1dd96241 ("clk: Set req_rate on reparenting") introduced a new function, clk_core_update_orphan_child_rates(), that updates the req_rate field on reparenting. It turns out that that function will interfere with the clock notifying done by __clk_recalc_rates(). This ends up reporting the new rate in both the old_rate and new_rate fields of struct clk_notifier_data. Since clk_core_update_orphan_child_rates() is basically __clk_recalc_rates() without the notifiers, and with the req_rate field update, we can drop clk_core_update_orphan_child_rates() entirely, and make __clk_recalc_rates() update req_rate. However, __clk_recalc_rates() is being called in several code paths: when retrieving a rate (most likely through clk_get_rate()), when changing parents (through clk_set_rate() or clk_hw_reparent()), or when updating the orphan status (through clk_core_reparent_orphans_nolock(), called at registration). Updating req_rate on reparenting or initialisation makes sense, but we shouldn't do it on clk_get_rate(). Thus an extra flag has been added to update or not req_rate depending on the context. Fixes: cb1b1dd96241 ("clk: Set req_rate on reparenting") Link: https://lore.kernel.org/linux-clk/0acc7217-762c-7c0d-45a0-55c384824ce4@samsung.com/ Link: https://lore.kernel.org/linux-clk/Y0QNSx+ZgqKSvPOC@sirena.org.uk/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Mark Brown <broonie@kernel.org> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221010-rpi-clk-fixes-again-v1-1-d87ba82ac404@cerno.tech Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-10 16:47:38 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Update req_rate on __clk_recalc_rates() Commit cb1b1dd96241 ("clk: Set req_rate on reparenting") introduced a new function, clk_core_update_orphan_child_rates(), that updates the req_rate field on reparenting. It turns out that that function will interfere with the clock notifying done by __clk_recalc_rates(). This ends up reporting the new rate in both the old_rate and new_rate fields of struct clk_notifier_data. Since clk_core_update_orphan_child_rates() is basically __clk_recalc_rates() without the notifiers, and with the req_rate field update, we can drop clk_core_update_orphan_child_rates() entirely, and make __clk_recalc_rates() update req_rate. However, __clk_recalc_rates() is being called in several code paths: when retrieving a rate (most likely through clk_get_rate()), when changing parents (through clk_set_rate() or clk_hw_reparent()), or when updating the orphan status (through clk_core_reparent_orphans_nolock(), called at registration). Updating req_rate on reparenting or initialisation makes sense, but we shouldn't do it on clk_get_rate(). Thus an extra flag has been added to update or not req_rate depending on the context. Fixes: cb1b1dd96241 ("clk: Set req_rate on reparenting") Link: https://lore.kernel.org/linux-clk/0acc7217-762c-7c0d-45a0-55c384824ce4@samsung.com/ Link: https://lore.kernel.org/linux-clk/Y0QNSx+ZgqKSvPOC@sirena.org.uk/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Mark Brown <broonie@kernel.org> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221010-rpi-clk-fixes-again-v1-1-d87ba82ac404@cerno.tech Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-10 16:47:38 +02:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Fix potential NULL dereference in clk_fetch_parent_index() Don't compare the parent clock name with a NULL name in the clk_parent_map. This prevents a kernel crash when passing NULL core->parents[i].name to strcmp(). An example which triggered this is a mux clock with four parents when each of them is referenced in the clock driver using clk_parent_data.fw_name and then calling clk_set_parent(clk, 3rd_parent) on this mux. In this case the first parent is also the HW default so core->parents[i].hw is populated when the clock is registered. Calling clk_set_parent(clk, 3rd_parent) will then go through all parents and skip the first parent because it's hw pointer doesn't match. For the second parent no hw pointer is cached yet and clk_core_get(core, 1) returns a non-matching pointer (which is correct because we are comparing the second with the third parent). Comparing the result of clk_core_get(core, 2) with the requested parent gives a match. However we don't reach this point because right after the clk_core_get(core, 1) mismatch the old code tried to !strcmp(parent->name, NULL) (where the second argument is actually core->parents[i].name, but that was never populated by the clock driver). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lkml.kernel.org/r/20190815223155.21384-1-martin.blumenstingl@googlemail.com Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-16 00:31:55 +02:00
clk: track the orphan status of clocks and their children While children of orphan clocks are not carried in the orphan-list itself, they're nevertheless orphans in their own right as they also don't have an input-rate available. To ease tracking if a clock is an orphan or has an orphan in its parent path introduce an orphan field into struct clk and update it and the fields in child-clocks when a clock gets added or removed from the orphan-list. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Alex Elder <elder@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: kernel@pengutronix.de Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Chao Xie <chao.xie@marvell.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Georgi Djakov <georgi.djakov@linaro.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Barry Song <baohua@kernel.org> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com> Cc: emilio@elopez.com.ar Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Michal Simek <michal.simek@xilinx.com> [sboyd@codeaurora.org: s/clk/core/ in new function] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-22 22:53:05 +02:00
clk: track the orphan status of clocks and their children While children of orphan clocks are not carried in the orphan-list itself, they're nevertheless orphans in their own right as they also don't have an input-rate available. To ease tracking if a clock is an orphan or has an orphan in its parent path introduce an orphan field into struct clk and update it and the fields in child-clocks when a clock gets added or removed from the orphan-list. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Alex Elder <elder@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: kernel@pengutronix.de Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Chao Xie <chao.xie@marvell.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Georgi Djakov <georgi.djakov@linaro.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Barry Song <baohua@kernel.org> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com> Cc: emilio@elopez.com.ar Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Michal Simek <michal.simek@xilinx.com> [sboyd@codeaurora.org: s/clk/core/ in new function] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-22 22:53:05 +02:00
clk: track the orphan status of clocks and their children While children of orphan clocks are not carried in the orphan-list itself, they're nevertheless orphans in their own right as they also don't have an input-rate available. To ease tracking if a clock is an orphan or has an orphan in its parent path introduce an orphan field into struct clk and update it and the fields in child-clocks when a clock gets added or removed from the orphan-list. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Alex Elder <elder@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: kernel@pengutronix.de Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Chao Xie <chao.xie@marvell.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Georgi Djakov <georgi.djakov@linaro.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Barry Song <baohua@kernel.org> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com> Cc: emilio@elopez.com.ar Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Michal Simek <michal.simek@xilinx.com> [sboyd@codeaurora.org: s/clk/core/ in new function] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-22 22:53:05 +02:00
clk: track the orphan status of clocks and their children While children of orphan clocks are not carried in the orphan-list itself, they're nevertheless orphans in their own right as they also don't have an input-rate available. To ease tracking if a clock is an orphan or has an orphan in its parent path introduce an orphan field into struct clk and update it and the fields in child-clocks when a clock gets added or removed from the orphan-list. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Alex Elder <elder@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: kernel@pengutronix.de Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Chao Xie <chao.xie@marvell.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Georgi Djakov <georgi.djakov@linaro.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Barry Song <baohua@kernel.org> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com> Cc: emilio@elopez.com.ar Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Michal Simek <michal.simek@xilinx.com> [sboyd@codeaurora.org: s/clk/core/ in new function] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-22 22:53:05 +02:00
clk: track the orphan status of clocks and their children While children of orphan clocks are not carried in the orphan-list itself, they're nevertheless orphans in their own right as they also don't have an input-rate available. To ease tracking if a clock is an orphan or has an orphan in its parent path introduce an orphan field into struct clk and update it and the fields in child-clocks when a clock gets added or removed from the orphan-list. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Alex Elder <elder@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: kernel@pengutronix.de Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Chao Xie <chao.xie@marvell.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Georgi Djakov <georgi.djakov@linaro.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Barry Song <baohua@kernel.org> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com> Cc: emilio@elopez.com.ar Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Michal Simek <michal.simek@xilinx.com> [sboyd@codeaurora.org: s/clk/core/ in new function] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-22 22:53:05 +02:00
clk: Set req_rate on reparenting If a non-rate clock started by default with a parent that never registered, core->req_rate will be 0. The expectation is that whenever the parent will be registered, req_rate will be updated with the new value that has just been computed. However, if that clock is a mux, clk_set_parent() can also make that clock no longer orphan. In this case however, we never update req_rate. The natural solution to this would be to update core->rate and core->req_rate in clk_reparent() by calling clk_recalc(). However, this doesn't work in all cases. Indeed, clk_recalc() is called by __clk_set_parent_before(), __clk_set_parent() and clk_core_reparent(). Both __clk_set_parent_before() and __clk_set_parent will call clk_recalc() with the enable_lock taken through a call to clk_enable_lock(), the underlying locking primitive being a spinlock. clk_recalc() calls the backing driver .recalc_rate hook, and that implementation might sleep if the underlying device uses a bus with accesses that might sleep, such as i2c. In such a situation, we would end up sleeping while holding a spinlock, and thus in an atomic section. In order to work around this, we can move the core->rate and core->req_rate update to the clk_recalc() calling sites, after the enable_lock has been released if it was taken. The only situation that could still be problematic is the clk_core_reparent() -> clk_reparent() case that doesn't have any locking. clk_core_reparent() is itself called by clk_hw_reparent(), which is then called by 4 drivers: * clk-stm32mp1.c, stm32/clk-stm32-core.c and tegra/clk-tegra210-emc.c use it in their set_parent implementation. The set_parent hook is only called by __clk_set_parent() and clk_change_rate(), both of them calling it without the enable_lock taken. * clk/tegra/clk-tegra124-emc.c calls it as part of its set_rate implementation. set_rate is only called by clk_change_rate(), again without the enable_lock taken. In both cases we can't end up in a situation where the clk_hw_reparent() caller would hold a spinlock, so it seems like this is a good workaround. Let's also add some unit tests to make sure we cover the original bug. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-14-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:18 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: change clk_ops' ->determine_rate() prototype Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 20:48:08 +02:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Manage proper runtime PM state in clk_change_rate() clk_change_rate() propagates rate change down to all its children. Such operation requires managing proper runtime PM state of each child, what was missing. Add needed calls to clk_pm_runtime*() to ensure that set_rate() clock callback is called on runtime active clock. This fixes following issue found on Exynos5433 TM2 board with devfreq enabled: Synchronous External Abort: synchronous external abort (0x96000210) at 0xffffff80093f5600 Internal error: : 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5 Comm: kworker/u16:0 Not tainted 4.15.0-rc1-next-20171129+ #4 Hardware name: Samsung TM2 board (DT) Workqueue: devfreq_wq devfreq_monitor task: ffffffc0ca96b600 task.stack: ffffff80093a8000 pstate: a0000085 (NzCv daIf -PAN -UAO) pc : clk_divider_set_rate+0x54/0x118 lr : clk_divider_set_rate+0x44/0x118 ... Process kworker/u16:0 (pid: 5, stack limit = 0xffffff80093a8000) Call trace: clk_divider_set_rate+0x54/0x118 clk_change_rate+0xfc/0x4e0 clk_change_rate+0x1f0/0x4e0 clk_change_rate+0x1f0/0x4e0 clk_change_rate+0x1f0/0x4e0 clk_core_set_rate_nolock+0x138/0x148 clk_set_rate+0x28/0x50 exynos_bus_passive_target+0x6c/0x11c update_devfreq_passive+0x58/0xb4 devfreq_passive_notifier_call+0x50/0x5c notifier_call_chain+0x4c/0x88 __srcu_notifier_call_chain+0x54/0x80 srcu_notifier_call_chain+0x14/0x1c update_devfreq+0x100/0x1b4 devfreq_monitor+0x2c/0x88 process_one_work+0x148/0x3d8 worker_thread+0x13c/0x3f8 kthread+0x100/0x12c ret_from_fork+0x10/0x18 Reported-by: Chanwoo Choi <cw00.choi@samsung.com> Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 13:14:51 +01:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: add CLK_RECALC_NEW_RATES clock flag for Exynos cpu clock support This flag is needed to fix the issue with wrong dividers being setup by Common Clock Framework when using the new Exynos cpu clock support. The issue happens because clk_core_set_rate_nolock() calls clk_calc_new_rates(clk, rate) before both pre/post clock notifiers have a chance to run. In case of Exynos cpu clock support pre/post clock notifiers are registered for mout_apll clock which is a parent of armclk cpu clock and dividers are modified in both pre and post clock notifier. This results in wrong dividers values being later programmed by clk_change_rate(top). To workaround the problem CLK_RECALC_NEW_RATES flag is added and it is set for mout_apll clock later so the correct divider values are re-calculated after both pre and post clock notifiers had run. For example when using "performance" governor on Exynos4210 Origen board the cpufreq-dt driver requests to change the frequency from 1000MHz to 1200MHz and after the change state of the relevant clocks is following: Without use of CLK_GET_RATE_NOCACHE flag: fout_apll rate: 1200000000 fout_apll_div_2 rate: 600000000 mout_clkout_cpu rate: 600000000 div_clkout_cpu rate: 600000000 clkout_cpu rate: 600000000 mout_apll rate: 1200000000 armclk rate: 1200000000 mout_hpm rate: 1200000000 div_copy rate: 300000000 div_hpm rate: 300000000 mout_core rate: 1200000000 div_core rate: 1200000000 div_core2 rate: 1200000000 arm_clk_div_2 rate: 600000000 div_corem0 rate: 300000000 div_corem1 rate: 150000000 div_periph rate: 300000000 div_atb rate: 300000000 div_pclk_dbg rate: 150000000 sclk_apll rate: 1200000000 sclk_apll_div_2 rate: 600000000 With use of CLK_GET_RATE_NOCACHE flag: fout_apll rate: 1200000000 fout_apll_div_2 rate: 600000000 mout_clkout_cpu rate: 600000000 div_clkout_cpu rate: 600000000 clkout_cpu rate: 600000000 mout_apll rate: 1200000000 armclk rate: 1200000000 mout_hpm rate: 1200000000 div_copy rate: 200000000 div_hpm rate: 200000000 mout_core rate: 1200000000 div_core rate: 1200000000 div_core2 rate: 1200000000 arm_clk_div_2 rate: 600000000 div_corem0 rate: 300000000 div_corem1 rate: 150000000 div_periph rate: 300000000 div_atb rate: 240000000 div_pclk_dbg rate: 120000000 sclk_apll rate: 150000000 sclk_apll_div_2 rate: 75000000 Without this change cpufreq-dt driver showed ~10 mA larger energy consumption when compared to cpufreq-exynos one when "performance" cpufreq governor was used on Exynos4210 SoC based Origen board. This issue was probably meant to be workarounded by use of CLK_GET_RATE_NOCACHE and CLK_DIVIDER_READ_ONLY clock flags in the original Exynos cpu clock patchset (in "[PATCH v12 6/6] clk: samsung: remove unused clock aliases and update clock flags" patch) but usage of these flags is not sufficient to fix the issue observed. Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-04-03 18:43:44 +02:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: add support for clock reparent on set_rate Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 12:25:00 +01:00
clk: Manage proper runtime PM state in clk_change_rate() clk_change_rate() propagates rate change down to all its children. Such operation requires managing proper runtime PM state of each child, what was missing. Add needed calls to clk_pm_runtime*() to ensure that set_rate() clock callback is called on runtime active clock. This fixes following issue found on Exynos5433 TM2 board with devfreq enabled: Synchronous External Abort: synchronous external abort (0x96000210) at 0xffffff80093f5600 Internal error: : 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5 Comm: kworker/u16:0 Not tainted 4.15.0-rc1-next-20171129+ #4 Hardware name: Samsung TM2 board (DT) Workqueue: devfreq_wq devfreq_monitor task: ffffffc0ca96b600 task.stack: ffffff80093a8000 pstate: a0000085 (NzCv daIf -PAN -UAO) pc : clk_divider_set_rate+0x54/0x118 lr : clk_divider_set_rate+0x44/0x118 ... Process kworker/u16:0 (pid: 5, stack limit = 0xffffff80093a8000) Call trace: clk_divider_set_rate+0x54/0x118 clk_change_rate+0xfc/0x4e0 clk_change_rate+0x1f0/0x4e0 clk_change_rate+0x1f0/0x4e0 clk_change_rate+0x1f0/0x4e0 clk_core_set_rate_nolock+0x138/0x148 clk_set_rate+0x28/0x50 exynos_bus_passive_target+0x6c/0x11c update_devfreq_passive+0x58/0xb4 devfreq_passive_notifier_call+0x50/0x5c notifier_call_chain+0x4c/0x88 __srcu_notifier_call_chain+0x54/0x80 srcu_notifier_call_chain+0x14/0x1c update_devfreq+0x100/0x1b4 devfreq_monitor+0x2c/0x88 process_one_work+0x148/0x3d8 worker_thread+0x13c/0x3f8 kthread+0x100/0x12c ret_from_fork+0x10/0x18 Reported-by: Chanwoo Choi <cw00.choi@samsung.com> Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-30 13:14:51 +01:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller The clk_rate_request structure is used internally as an argument for the clk_core_determine_round_nolock() and clk_core_round_rate_nolock(). In both cases, the clk_core_init_rate_req() function is used to initialize the clk_rate_request structure. However, the expectation on who gets to call that function is inconsistent between those two functions. Indeed, clk_core_determine_round_nolock() will assume the structure is properly initialized and will just use it. On the other hand, clk_core_round_rate_nolock() will call clk_core_init_rate_req() itself, expecting the caller to have filled only a minimal set of parameters (rate, min_rate and max_rate). If we ignore the calling convention inconsistency, this leads to a second inconsistency for drivers: * If they get called by the framework through clk_core_round_rate_nolock(), the rate, min_rate and max_rate fields will be filled by the caller, and the best_parent_rate and best_parent_hw fields will get filled by clk_core_init_rate_req(). * If they get called by a driver through __clk_determine_rate (and thus clk_core_round_rate_nolock), only best_parent_rate and best_parent_hw are being explicitly set by the framework. Even though we can reasonably expect rate to be set, only one of the 6 in-tree users explicitly set min_rate and max_rate. * If they get called by the framework through clk_core_determine_round_nolock(), then we have two callpaths. Either it will be called by clk_core_round_rate_nolock() itself, or it will be called by clk_calc_new_rates(), which will properly initialize rate, min_rate, max_rate itself, and best_parent_rate and best_parent_hw through clk_core_init_rate_req(). Even though the first and third case seems equivalent, they aren't when the clock has CLK_SET_RATE_PARENT. Indeed, in such a case clk_core_round_rate_nolock() will call itself on the current parent clock with the same clk_rate_request structure. The clk_core_init_rate_req() function will then be called on the parent clock, with the child clk_rate_request pointer and will fill the best_parent_rate and best_parent_hw fields with the parent context. When the whole recursion stops and the call returns, the initial caller will end up with a clk_rate_request structure with some information of the child clock (rate, min_rate, max_rate) and some others of the last clock up the tree whose child had CLK_SET_RATE_PARENT (best_parent_hw, best_parent_rate). In the most common case, best_parent_rate is going to be equal on all the parent clocks so it's not a big deal. However, best_parent_hw is going to point to a clock that never has been a valid parent for that clock which is definitely confusing. In order to fix the calling inconsistency, let's move the clk_core_init_rate_req() calls to the callers, which will also help a bit with the clk_core_round_rate_nolock() recursion. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-16-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-16 13:25:20 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Enforce that disjoints limits are invalid If we were to have two users of the same clock, doing something like: clk_set_rate_range(user1, 1000, 2000); clk_set_rate_range(user2, 3000, 4000); The second call would fail with -EINVAL, preventing from getting in a situation where we end up with impossible limits. However, this is never explicitly checked against and enforced, and works by relying on an undocumented behaviour of clk_set_rate(). Indeed, on the first clk_set_rate_range will make sure the current clock rate is within the new range, so it will be between 1000 and 2000Hz. On the second clk_set_rate_range(), it will consider (rightfully), that our current clock is outside of the 3000-4000Hz range, and will call clk_core_set_rate_nolock() to set it to 3000Hz. clk_core_set_rate_nolock() will then call clk_calc_new_rates() that will eventually check that our rate 3000Hz rate is outside the min 3000Hz max 2000Hz range, will bail out, the error will propagate and we'll eventually return -EINVAL. This solely relies on the fact that clk_calc_new_rates(), and in particular clk_core_determine_round_nolock(), won't modify the new rate allowing the error to be reported. That assumption won't be true for all drivers, and most importantly we'll break that assumption in a later patch. It can also be argued that we shouldn't even reach the point where we're calling clk_core_set_rate_nolock(). Let's make an explicit check for disjoints range before we're doing anything. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-4-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-25 15:35:25 +01:00
clk: Enforce that disjoints limits are invalid If we were to have two users of the same clock, doing something like: clk_set_rate_range(user1, 1000, 2000); clk_set_rate_range(user2, 3000, 4000); The second call would fail with -EINVAL, preventing from getting in a situation where we end up with impossible limits. However, this is never explicitly checked against and enforced, and works by relying on an undocumented behaviour of clk_set_rate(). Indeed, on the first clk_set_rate_range will make sure the current clock rate is within the new range, so it will be between 1000 and 2000Hz. On the second clk_set_rate_range(), it will consider (rightfully), that our current clock is outside of the 3000-4000Hz range, and will call clk_core_set_rate_nolock() to set it to 3000Hz. clk_core_set_rate_nolock() will then call clk_calc_new_rates() that will eventually check that our rate 3000Hz rate is outside the min 3000Hz max 2000Hz range, will bail out, the error will propagate and we'll eventually return -EINVAL. This solely relies on the fact that clk_calc_new_rates(), and in particular clk_core_determine_round_nolock(), won't modify the new rate allowing the error to be reported. That assumption won't be true for all drivers, and most importantly we'll break that assumption in a later patch. It can also be argued that we shouldn't even reach the point where we're calling clk_core_set_rate_nolock(). Let's make an explicit check for disjoints range before we're doing anything. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-4-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-25 15:35:25 +01:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Update req_rate on __clk_recalc_rates() Commit cb1b1dd96241 ("clk: Set req_rate on reparenting") introduced a new function, clk_core_update_orphan_child_rates(), that updates the req_rate field on reparenting. It turns out that that function will interfere with the clock notifying done by __clk_recalc_rates(). This ends up reporting the new rate in both the old_rate and new_rate fields of struct clk_notifier_data. Since clk_core_update_orphan_child_rates() is basically __clk_recalc_rates() without the notifiers, and with the req_rate field update, we can drop clk_core_update_orphan_child_rates() entirely, and make __clk_recalc_rates() update req_rate. However, __clk_recalc_rates() is being called in several code paths: when retrieving a rate (most likely through clk_get_rate()), when changing parents (through clk_set_rate() or clk_hw_reparent()), or when updating the orphan status (through clk_core_reparent_orphans_nolock(), called at registration). Updating req_rate on reparenting or initialisation makes sense, but we shouldn't do it on clk_get_rate(). Thus an extra flag has been added to update or not req_rate depending on the context. Fixes: cb1b1dd96241 ("clk: Set req_rate on reparenting") Link: https://lore.kernel.org/linux-clk/0acc7217-762c-7c0d-45a0-55c384824ce4@samsung.com/ Link: https://lore.kernel.org/linux-clk/Y0QNSx+ZgqKSvPOC@sirena.org.uk/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Mark Brown <broonie@kernel.org> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221010-rpi-clk-fixes-again-v1-1-d87ba82ac404@cerno.tech Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-10 16:47:38 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Fix race condition between clk_set_parent and clk_enable() Without this patch, the following race condition is possible. * clk-A has two parents - clk-X and clk-Y. * All three are disabled and clk-X is current parent. * Thread A: clk_set_parent(clk-A, clk-Y). * Thread A: <snip execution flow> * Thread A: Grabs enable lock. * Thread A: Sees enable count of clk-A is 0, so doesn't enable clk-Y. * Thread A: Updates clk-A SW parent to clk-Y * Thread A: Releases enable lock. * Thread B: clk_enable(clk-A). * Thread B: clk_enable() enables clk-Y, then enabled clk-A and returns. clk-A is now enabled in software, but not clocking in hardware since the hardware parent is still clk-X. The only way to avoid race conditions between clk_set_parent() and clk_enable/disable() is to ensure that clk_enable/disable() calls don't require changes to hardware enable state between changes to software clock topology and hardware clock topology. The options to achieve the above are: 1. Grab the enable lock before changing software/hardware topology and release it afterwards. 2. Keep the clock enabled for the duration of software/hardware topology change so that any additional enable/disable calls don't try to change the hardware state. Once the topology change is complete, the clock can be put back in its original enable state. Option (1) is not an acceptable solution since the set_parent() ops might need to sleep. Therefore, this patch implements option (2). This patch doesn't violate any API semantics. clk_disable() doesn't guarantee that the clock is actually disabled. So, no clients of a clock can assume that a clock is disabled after their last call to clk_disable(). So, enabling the clock during a parent change is not a violation of any API semantics. This also has the nice side effect of simplifying the error handling code. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: fixed up whitespace issue]
2013-05-15 21:07:24 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Update req_rate on __clk_recalc_rates() Commit cb1b1dd96241 ("clk: Set req_rate on reparenting") introduced a new function, clk_core_update_orphan_child_rates(), that updates the req_rate field on reparenting. It turns out that that function will interfere with the clock notifying done by __clk_recalc_rates(). This ends up reporting the new rate in both the old_rate and new_rate fields of struct clk_notifier_data. Since clk_core_update_orphan_child_rates() is basically __clk_recalc_rates() without the notifiers, and with the req_rate field update, we can drop clk_core_update_orphan_child_rates() entirely, and make __clk_recalc_rates() update req_rate. However, __clk_recalc_rates() is being called in several code paths: when retrieving a rate (most likely through clk_get_rate()), when changing parents (through clk_set_rate() or clk_hw_reparent()), or when updating the orphan status (through clk_core_reparent_orphans_nolock(), called at registration). Updating req_rate on reparenting or initialisation makes sense, but we shouldn't do it on clk_get_rate(). Thus an extra flag has been added to update or not req_rate depending on the context. Fixes: cb1b1dd96241 ("clk: Set req_rate on reparenting") Link: https://lore.kernel.org/linux-clk/0acc7217-762c-7c0d-45a0-55c384824ce4@samsung.com/ Link: https://lore.kernel.org/linux-clk/Y0QNSx+ZgqKSvPOC@sirena.org.uk/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Mark Brown <broonie@kernel.org> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221010-rpi-clk-fixes-again-v1-1-d87ba82ac404@cerno.tech Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-10 16:47:38 +02:00
clk: Update req_rate on __clk_recalc_rates() Commit cb1b1dd96241 ("clk: Set req_rate on reparenting") introduced a new function, clk_core_update_orphan_child_rates(), that updates the req_rate field on reparenting. It turns out that that function will interfere with the clock notifying done by __clk_recalc_rates(). This ends up reporting the new rate in both the old_rate and new_rate fields of struct clk_notifier_data. Since clk_core_update_orphan_child_rates() is basically __clk_recalc_rates() without the notifiers, and with the req_rate field update, we can drop clk_core_update_orphan_child_rates() entirely, and make __clk_recalc_rates() update req_rate. However, __clk_recalc_rates() is being called in several code paths: when retrieving a rate (most likely through clk_get_rate()), when changing parents (through clk_set_rate() or clk_hw_reparent()), or when updating the orphan status (through clk_core_reparent_orphans_nolock(), called at registration). Updating req_rate on reparenting or initialisation makes sense, but we shouldn't do it on clk_get_rate(). Thus an extra flag has been added to update or not req_rate depending on the context. Fixes: cb1b1dd96241 ("clk: Set req_rate on reparenting") Link: https://lore.kernel.org/linux-clk/0acc7217-762c-7c0d-45a0-55c384824ce4@samsung.com/ Link: https://lore.kernel.org/linux-clk/Y0QNSx+ZgqKSvPOC@sirena.org.uk/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Mark Brown <broonie@kernel.org> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221010-rpi-clk-fixes-again-v1-1-d87ba82ac404@cerno.tech Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-10 16:47:38 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Update req_rate on __clk_recalc_rates() Commit cb1b1dd96241 ("clk: Set req_rate on reparenting") introduced a new function, clk_core_update_orphan_child_rates(), that updates the req_rate field on reparenting. It turns out that that function will interfere with the clock notifying done by __clk_recalc_rates(). This ends up reporting the new rate in both the old_rate and new_rate fields of struct clk_notifier_data. Since clk_core_update_orphan_child_rates() is basically __clk_recalc_rates() without the notifiers, and with the req_rate field update, we can drop clk_core_update_orphan_child_rates() entirely, and make __clk_recalc_rates() update req_rate. However, __clk_recalc_rates() is being called in several code paths: when retrieving a rate (most likely through clk_get_rate()), when changing parents (through clk_set_rate() or clk_hw_reparent()), or when updating the orphan status (through clk_core_reparent_orphans_nolock(), called at registration). Updating req_rate on reparenting or initialisation makes sense, but we shouldn't do it on clk_get_rate(). Thus an extra flag has been added to update or not req_rate depending on the context. Fixes: cb1b1dd96241 ("clk: Set req_rate on reparenting") Link: https://lore.kernel.org/linux-clk/0acc7217-762c-7c0d-45a0-55c384824ce4@samsung.com/ Link: https://lore.kernel.org/linux-clk/Y0QNSx+ZgqKSvPOC@sirena.org.uk/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Mark Brown <broonie@kernel.org> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221010-rpi-clk-fixes-again-v1-1-d87ba82ac404@cerno.tech Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-10 16:47:38 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Don't parent clks until the parent is fully registered Before commit fc0c209c147f ("clk: Allow parents to be specified without string names") child clks couldn't find their parent until the parent clk was added to a list in __clk_core_init(). After that commit, child clks can reference their parent clks directly via a clk_hw pointer, or they can lookup that clk_hw pointer via DT if the parent clk is registered with an OF clk provider. The common clk framework treats hw->core being non-NULL as "the clk is registered" per the logic within clk_core_fill_parent_index(): parent = entry->hw->core; /* * We have a direct reference but it isn't registered yet? * Orphan it and let clk_reparent() update the orphan status * when the parent is registered. */ if (!parent) Therefore we need to be extra careful to not set hw->core until the clk is fully registered with the clk framework. Otherwise we can get into a situation where a child finds a parent clk and we move the child clk off the orphan list when the parent isn't actually registered, wrecking our enable accounting and breaking critical clks. Consider the following scenario: CPU0 CPU1 ---- ---- struct clk_hw clkBad; struct clk_hw clkA; clkA.init.parent_hws = { &clkBad }; clk_hw_register(&clkA) clk_hw_register(&clkBad) ... __clk_register() hw->core = core ... __clk_register() __clk_core_init() clk_prepare_lock() __clk_init_parent() clk_core_get_parent_by_index() clk_core_fill_parent_index() if (entry->hw) { parent = entry->hw->core; At this point, 'parent' points to clkBad even though clkBad hasn't been fully registered yet. Ouch! A similar problem can happen if a clk controller registers orphan clks that are referenced in the DT node of another clk controller. Let's fix all this by only setting the hw->core pointer underneath the clk prepare lock in __clk_core_init(). This way we know that clk_core_fill_parent_index() can't see hw->core be non-NULL until the clk is fully registered. Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20211109043438.4639-1-quic_mdtipton@quicinc.com [sboyd@kernel.org: Reword commit text, update comment] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-11-08 20:34:38 -08:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Forbid to register a mux without determine_rate The determine_rate hook allows to select the proper parent and its rate for a given clock configuration. On another hand, set_parent is there to change the parent of a mux. Some clocks provide a set_parent hook but don't implement determine_rate. In such a case, set_parent is pretty much useless since the clock framework will always assume the current parent is to be used, and we will thus never change it. This situation can be solved in two ways: - either we don't need to change the parent, and we thus shouldn't implement set_parent; - or we don't want to change the parent, in this case we should set CLK_SET_RATE_NO_REPARENT; - or we're missing a determine_rate implementation. The latter is probably just an oversight from the driver's author, and we should thus raise their awareness about the fact that the current state of the driver is confusing. All the drivers in-tree have been converted by now, so let's prevent any clock with set_parent but without determine_rate to register so that it can't sneak in again in the future. Cc: Abel Vesa <abelvesa@kernel.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: "Andreas Färber" <afaerber@suse.de> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Chen-Yu Tsai <wenst@chromium.org> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: David Lechner <david@lechnology.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Luca Ceresoli <luca.ceresoli@bootlin.com> Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Markus Schneider-Pargmann <msp@baylibre.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Miles Chen <miles.chen@mediatek.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peng Fan <peng.fan@nxp.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-actions@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@vger.kernel.org Cc: linux-phy@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-sunxi@lists.linux.dev Cc: linux-tegra@vger.kernel.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: patches@opensource.cirrus.com Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-68-971d5077e7d2@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-05-05 13:26:10 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: track the orphan status of clocks and their children While children of orphan clocks are not carried in the orphan-list itself, they're nevertheless orphans in their own right as they also don't have an input-rate available. To ease tracking if a clock is an orphan or has an orphan in its parent path introduce an orphan field into struct clk and update it and the fields in child-clocks when a clock gets added or removed from the orphan-list. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Alex Elder <elder@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: kernel@pengutronix.de Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Chao Xie <chao.xie@marvell.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Georgi Djakov <georgi.djakov@linaro.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Barry Song <baohua@kernel.org> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com> Cc: emilio@elopez.com.ar Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Michal Simek <michal.simek@xilinx.com> [sboyd@codeaurora.org: s/clk/core/ in new function] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-22 22:53:05 +02:00
clk: track the orphan status of clocks and their children While children of orphan clocks are not carried in the orphan-list itself, they're nevertheless orphans in their own right as they also don't have an input-rate available. To ease tracking if a clock is an orphan or has an orphan in its parent path introduce an orphan field into struct clk and update it and the fields in child-clocks when a clock gets added or removed from the orphan-list. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Alex Elder <elder@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: kernel@pengutronix.de Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Chao Xie <chao.xie@marvell.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Georgi Djakov <georgi.djakov@linaro.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Barry Song <baohua@kernel.org> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com> Cc: emilio@elopez.com.ar Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Michal Simek <michal.simek@xilinx.com> [sboyd@codeaurora.org: s/clk/core/ in new function] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-22 22:53:05 +02:00
clk: Use hashtable for global clk lookups A clk lookup using clk_core_lookup() is currently somewhat expensive since it has to walk the whole clk tree to find a match. This is extremely bad in the clk_core_init() function where it is used to look for clk name conflicts, which is always the worst case of walking the whole tree. Moreover, the number of clks checked increases as more clks are registered, causing each subsequent clk registration becoming slower. Add a hashtable for doing clk lookups to replace the tree walk method. On arm64 this increases kernel memory usage by 4 KB for the hashtable, and 16 bytes (2 pointers) for |struct hlist_node| in each clk. On a platform with around 800 clks, this reduces the time spent in clk_core_lookup() significantly: | PID 0 | kworker | | before | after | before | after | ------------------------------------------- avg | 203 us | 2.7 us | 123 us | 1.5 us | ------------------------------------------- min | 4.7 us | 2.3 us | 102 us | 0.9 us | ------------------------------------------- max | 867 us | 4.8 us | 237 us | 3.5 us | ------------------------------------------- culm | 109 ms | 1.5 ms | 21 ms | 0.3 ms | This in turn reduces the time spent in clk_hw_register(), and ultimately, boot time. On a different system with close to 700 clks, This reduces boot time by around 110 ms. While this doesn't seem like a lot, this helps in cases where minimizing boot time is important. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-08-14 11:53:16 +08:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: migrate the count of orphaned clocks at init The orphan clocks reparents should migrate any existing count from the orphan clock to its new acestor clocks, otherwise we may have inconsistent counts in the tree and end-up with gated critical clocks Assuming we have two clocks, A and B. * Clock A has CLK_IS_CRITICAL flag set. * Clock B is an ancestor of A which can gate. Clock B gate is left enabled by the bootloader. Step 1: Clock A is registered. Since it is a critical clock, it is enabled. The clock being still an orphan, no parent are enabled. Step 2: Clock B is registered and reparented to clock A (potentially through several other clocks). We are now in situation where the enable count of clock A is 1 while the enable count of its ancestors is 0, which is not good. Step 3: in lateinit, clk_disable_unused() is called, the enable_count of clock B being 0, clock B is gated and and critical clock A actually gets disabled. This situation was found while adding fdiv_clk gates to the meson8b platform. These clocks parent clk81 critical clock, which is the mother of all peripheral clocks in this system. Because of the issue described here, the system is crashing when clk_disable_unused() is called. The situation is solved by reverting commit f8f8f1d04494 ("clk: Don't touch hardware when reparenting during registration"). To avoid breaking again the situation described in this commit description, enabling critical clock should be done before walking the orphan list. This way, a parent critical clock may not be accidentally disabled due to the CLK_OPS_PARENT_ENABLE mechanism. Fixes: f8f8f1d04494 ("clk: Don't touch hardware when reparenting during registration") Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2018-02-14 14:43:36 +01:00
clk: migrate the count of orphaned clocks at init The orphan clocks reparents should migrate any existing count from the orphan clock to its new acestor clocks, otherwise we may have inconsistent counts in the tree and end-up with gated critical clocks Assuming we have two clocks, A and B. * Clock A has CLK_IS_CRITICAL flag set. * Clock B is an ancestor of A which can gate. Clock B gate is left enabled by the bootloader. Step 1: Clock A is registered. Since it is a critical clock, it is enabled. The clock being still an orphan, no parent are enabled. Step 2: Clock B is registered and reparented to clock A (potentially through several other clocks). We are now in situation where the enable count of clock A is 1 while the enable count of its ancestors is 0, which is not good. Step 3: in lateinit, clk_disable_unused() is called, the enable_count of clock B being 0, clock B is gated and and critical clock A actually gets disabled. This situation was found while adding fdiv_clk gates to the meson8b platform. These clocks parent clk81 critical clock, which is the mother of all peripheral clocks in this system. Because of the issue described here, the system is crashing when clk_disable_unused() is called. The situation is solved by reverting commit f8f8f1d04494 ("clk: Don't touch hardware when reparenting during registration"). To avoid breaking again the situation described in this commit description, enabling critical clock should be done before walking the orphan list. This way, a parent critical clock may not be accidentally disabled due to the CLK_OPS_PARENT_ENABLE mechanism. Fixes: f8f8f1d04494 ("clk: Don't touch hardware when reparenting during registration") Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2018-02-14 14:43:36 +01:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Add support for runtime PM Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
2017-08-21 10:04:59 +02:00
clk: Don't parent clks until the parent is fully registered Before commit fc0c209c147f ("clk: Allow parents to be specified without string names") child clks couldn't find their parent until the parent clk was added to a list in __clk_core_init(). After that commit, child clks can reference their parent clks directly via a clk_hw pointer, or they can lookup that clk_hw pointer via DT if the parent clk is registered with an OF clk provider. The common clk framework treats hw->core being non-NULL as "the clk is registered" per the logic within clk_core_fill_parent_index(): parent = entry->hw->core; /* * We have a direct reference but it isn't registered yet? * Orphan it and let clk_reparent() update the orphan status * when the parent is registered. */ if (!parent) Therefore we need to be extra careful to not set hw->core until the clk is fully registered with the clk framework. Otherwise we can get into a situation where a child finds a parent clk and we move the child clk off the orphan list when the parent isn't actually registered, wrecking our enable accounting and breaking critical clks. Consider the following scenario: CPU0 CPU1 ---- ---- struct clk_hw clkBad; struct clk_hw clkA; clkA.init.parent_hws = { &clkBad }; clk_hw_register(&clkA) clk_hw_register(&clkBad) ... __clk_register() hw->core = core ... __clk_register() __clk_core_init() clk_prepare_lock() __clk_init_parent() clk_core_get_parent_by_index() clk_core_fill_parent_index() if (entry->hw) { parent = entry->hw->core; At this point, 'parent' points to clkBad even though clkBad hasn't been fully registered yet. Ouch! A similar problem can happen if a clk controller registers orphan clks that are referenced in the DT node of another clk controller. Let's fix all this by only setting the hw->core pointer underneath the clk prepare lock in __clk_core_init(). This way we know that clk_core_fill_parent_index() can't see hw->core be non-NULL until the clk is fully registered. Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20211109043438.4639-1-quic_mdtipton@quicinc.com [sboyd@kernel.org: Reword commit text, update comment] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-11-08 20:34:38 -08:00
clk: Use hashtable for global clk lookups A clk lookup using clk_core_lookup() is currently somewhat expensive since it has to walk the whole clk tree to find a match. This is extremely bad in the clk_core_init() function where it is used to look for clk name conflicts, which is always the worst case of walking the whole tree. Moreover, the number of clks checked increases as more clks are registered, causing each subsequent clk registration becoming slower. Add a hashtable for doing clk lookups to replace the tree walk method. On arm64 this increases kernel memory usage by 4 KB for the hashtable, and 16 bytes (2 pointers) for |struct hlist_node| in each clk. On a platform with around 800 clks, this reduces the time spent in clk_core_lookup() significantly: | PID 0 | kworker | | before | after | before | after | ------------------------------------------- avg | 203 us | 2.7 us | 123 us | 1.5 us | ------------------------------------------- min | 4.7 us | 2.3 us | 102 us | 0.9 us | ------------------------------------------- max | 867 us | 4.8 us | 237 us | 3.5 us | ------------------------------------------- culm | 109 ms | 1.5 ms | 21 ms | 0.3 ms | This in turn reduces the time spent in clk_hw_register(), and ultimately, boot time. On a different system with close to 700 clks, This reduces boot time by around 110 ms. While this doesn't seem like a lot, this helps in cases where minimizing boot time is important. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-08-14 11:53:16 +08:00
clk: Don't parent clks until the parent is fully registered Before commit fc0c209c147f ("clk: Allow parents to be specified without string names") child clks couldn't find their parent until the parent clk was added to a list in __clk_core_init(). After that commit, child clks can reference their parent clks directly via a clk_hw pointer, or they can lookup that clk_hw pointer via DT if the parent clk is registered with an OF clk provider. The common clk framework treats hw->core being non-NULL as "the clk is registered" per the logic within clk_core_fill_parent_index(): parent = entry->hw->core; /* * We have a direct reference but it isn't registered yet? * Orphan it and let clk_reparent() update the orphan status * when the parent is registered. */ if (!parent) Therefore we need to be extra careful to not set hw->core until the clk is fully registered with the clk framework. Otherwise we can get into a situation where a child finds a parent clk and we move the child clk off the orphan list when the parent isn't actually registered, wrecking our enable accounting and breaking critical clks. Consider the following scenario: CPU0 CPU1 ---- ---- struct clk_hw clkBad; struct clk_hw clkA; clkA.init.parent_hws = { &clkBad }; clk_hw_register(&clkA) clk_hw_register(&clkBad) ... __clk_register() hw->core = core ... __clk_register() __clk_core_init() clk_prepare_lock() __clk_init_parent() clk_core_get_parent_by_index() clk_core_fill_parent_index() if (entry->hw) { parent = entry->hw->core; At this point, 'parent' points to clkBad even though clkBad hasn't been fully registered yet. Ouch! A similar problem can happen if a clk controller registers orphan clks that are referenced in the DT node of another clk controller. Let's fix all this by only setting the hw->core pointer underneath the clk prepare lock in __clk_core_init(). This way we know that clk_core_fill_parent_index() can't see hw->core be non-NULL until the clk is fully registered. Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20211109043438.4639-1-quic_mdtipton@quicinc.com [sboyd@kernel.org: Reword commit text, update comment] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-11-08 20:34:38 -08:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Use a separate struct for holding init data. Create a struct clk_init_data to hold all data that needs to be passed from the platfrom specific driver to the common clock framework during clock registration. Add a pointer to this struct inside clk_hw. This has several advantages: * Completely hides struct clk from many clock platform drivers and static clock initialization code that don't care for static initialization of the struct clks. * For platforms that want to do complete static initialization, it removed the need to directly mess with the struct clk's fields while still allowing to statically allocate struct clk. This keeps the code more future proof even if they include clk-private.h. * Simplifies the generic clk_register() function and allows adding optional fields in the future without modifying the function signature. * Simplifies the static initialization of clocks on all platforms by removing the need for forward delcarations or convoluted macros. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [mturquette@linaro.org: kept DEFINE_CLK_* macros and __clk_init] Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jamie Iles <jamie@jamieiles.com> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca>
2012-04-25 22:58:56 -07:00
clk: Use a separate struct for holding init data. Create a struct clk_init_data to hold all data that needs to be passed from the platfrom specific driver to the common clock framework during clock registration. Add a pointer to this struct inside clk_hw. This has several advantages: * Completely hides struct clk from many clock platform drivers and static clock initialization code that don't care for static initialization of the struct clks. * For platforms that want to do complete static initialization, it removed the need to directly mess with the struct clk's fields while still allowing to statically allocate struct clk. This keeps the code more future proof even if they include clk-private.h. * Simplifies the generic clk_register() function and allows adding optional fields in the future without modifying the function signature. * Simplifies the static initialization of clocks on all platforms by removing the need for forward delcarations or convoluted macros. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [mturquette@linaro.org: kept DEFINE_CLK_* macros and __clk_init] Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jamie Iles <jamie@jamieiles.com> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca>
2012-04-25 22:58:56 -07:00
clk: Use a separate struct for holding init data. Create a struct clk_init_data to hold all data that needs to be passed from the platfrom specific driver to the common clock framework during clock registration. Add a pointer to this struct inside clk_hw. This has several advantages: * Completely hides struct clk from many clock platform drivers and static clock initialization code that don't care for static initialization of the struct clks. * For platforms that want to do complete static initialization, it removed the need to directly mess with the struct clk's fields while still allowing to statically allocate struct clk. This keeps the code more future proof even if they include clk-private.h. * Simplifies the generic clk_register() function and allows adding optional fields in the future without modifying the function signature. * Simplifies the static initialization of clocks on all platforms by removing the need for forward delcarations or convoluted macros. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [mturquette@linaro.org: kept DEFINE_CLK_* macros and __clk_init] Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jamie Iles <jamie@jamieiles.com> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca>
2012-04-25 22:58:56 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be triggered more easily by simply booting on Qualcomm sc7180. Introduce a list of clk_core structures that have been registered, or are in the process of being registered, that require runtime PM to operate. Iterate this list and call clk_pm_runtime_get() on each of them without holding the prepare_lock during clk_disable_unused(). This way we can be certain that the runtime PM state of the devices will be active and resumed so we can't schedule away while walking the clk tree with the prepare_lock held. Similarly, call clk_pm_runtime_put() without the prepare_lock held to properly drop the runtime PM reference. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. Reported-by: Douglas Anderson <dianders@chromium.org> Closes: https://lore.kernel.org/all/20220922084322.RFC.2.I375b6b9e0a0a5348962f004beb3dafee6a12dfbb@changeid/ [1] Closes: https://issuetracker.google.com/328070191 Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240325184204.745706-5-sboyd@kernel.org Reviewed-by: Douglas Anderson <dianders@chromium.org>
2024-03-25 11:41:58 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Fix double free due to devm_clk_register() Now that clk_unregister() frees the struct clk we're unregistering we'll free memory twice: first we'll call kfree() in __clk_release() with an address kmalloc doesn't know about and second we'll call kfree() in the devres layer. Remove the allocation of struct clk in devm_clk_register() and let clk_release() handle it. This fixes slab errors like: ============================================================================= BUG kmalloc-128 (Not tainted): Invalid object pointer 0xed08e8d0 ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xeec503f8 objects=25 used=15 fp=0xed08ea00 flags=0x4081 CPU: 2 PID: 73 Comm: rmmod Tainted: G B 3.14.0-11032-g526e9c764381 #34 [<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14) [<c0012240>] (show_stack) from [<c04b74dc>] (dump_stack+0x70/0xbc) [<c04b74dc>] (dump_stack) from [<c00f6778>] (slab_err+0x74/0x84) [<c00f6778>] (slab_err) from [<c04b6278>] (free_debug_processing+0x2cc/0x31c) [<c04b6278>] (free_debug_processing) from [<c04b6300>] (__slab_free+0x38/0x41c) [<c04b6300>] (__slab_free) from [<c03931bc>] (clk_unregister+0xd4/0x140) [<c03931bc>] (clk_unregister) from [<c02fb774>] (release_nodes+0x164/0x1d8) [<c02fb774>] (release_nodes) from [<c02f8698>] (__device_release_driver+0x60/0xb0) [<c02f8698>] (__device_release_driver) from [<c02f9080>] (driver_detach+0xb4/0xb8) [<c02f9080>] (driver_detach) from [<c02f8480>] (bus_remove_driver+0x5c/0xc4) [<c02f8480>] (bus_remove_driver) from [<c008c9b8>] (SyS_delete_module+0x148/0x1d8) [<c008c9b8>] (SyS_delete_module) from [<c000ef80>] (ret_fast_syscall+0x0/0x48) FIX kmalloc-128: Object at 0xed08e8d0 not freed Fixes: fcb0ee6a3d33 (clk: Implement clk_unregister) Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@vger.kernel.org
2014-04-18 16:29:42 -07:00
clk: Fix double free due to devm_clk_register() Now that clk_unregister() frees the struct clk we're unregistering we'll free memory twice: first we'll call kfree() in __clk_release() with an address kmalloc doesn't know about and second we'll call kfree() in the devres layer. Remove the allocation of struct clk in devm_clk_register() and let clk_release() handle it. This fixes slab errors like: ============================================================================= BUG kmalloc-128 (Not tainted): Invalid object pointer 0xed08e8d0 ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xeec503f8 objects=25 used=15 fp=0xed08ea00 flags=0x4081 CPU: 2 PID: 73 Comm: rmmod Tainted: G B 3.14.0-11032-g526e9c764381 #34 [<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14) [<c0012240>] (show_stack) from [<c04b74dc>] (dump_stack+0x70/0xbc) [<c04b74dc>] (dump_stack) from [<c00f6778>] (slab_err+0x74/0x84) [<c00f6778>] (slab_err) from [<c04b6278>] (free_debug_processing+0x2cc/0x31c) [<c04b6278>] (free_debug_processing) from [<c04b6300>] (__slab_free+0x38/0x41c) [<c04b6300>] (__slab_free) from [<c03931bc>] (clk_unregister+0xd4/0x140) [<c03931bc>] (clk_unregister) from [<c02fb774>] (release_nodes+0x164/0x1d8) [<c02fb774>] (release_nodes) from [<c02f8698>] (__device_release_driver+0x60/0xb0) [<c02f8698>] (__device_release_driver) from [<c02f9080>] (driver_detach+0xb4/0xb8) [<c02f9080>] (driver_detach) from [<c02f8480>] (bus_remove_driver+0x5c/0xc4) [<c02f8480>] (bus_remove_driver) from [<c008c9b8>] (SyS_delete_module+0x148/0x1d8) [<c008c9b8>] (SyS_delete_module) from [<c000ef80>] (ret_fast_syscall+0x0/0x48) FIX kmalloc-128: Object at 0xed08e8d0 not freed Fixes: fcb0ee6a3d33 (clk: Implement clk_unregister) Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@vger.kernel.org
2014-04-18 16:29:42 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Use a separate struct for holding init data. Create a struct clk_init_data to hold all data that needs to be passed from the platfrom specific driver to the common clock framework during clock registration. Add a pointer to this struct inside clk_hw. This has several advantages: * Completely hides struct clk from many clock platform drivers and static clock initialization code that don't care for static initialization of the struct clks. * For platforms that want to do complete static initialization, it removed the need to directly mess with the struct clk's fields while still allowing to statically allocate struct clk. This keeps the code more future proof even if they include clk-private.h. * Simplifies the generic clk_register() function and allows adding optional fields in the future without modifying the function signature. * Simplifies the static initialization of clocks on all platforms by removing the need for forward delcarations or convoluted macros. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [mturquette@linaro.org: kept DEFINE_CLK_* macros and __clk_init] Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jamie Iles <jamie@jamieiles.com> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca>
2012-04-25 22:58:56 -07:00
clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be triggered more easily by simply booting on Qualcomm sc7180. Introduce a list of clk_core structures that have been registered, or are in the process of being registered, that require runtime PM to operate. Iterate this list and call clk_pm_runtime_get() on each of them without holding the prepare_lock during clk_disable_unused(). This way we can be certain that the runtime PM state of the devices will be active and resumed so we can't schedule away while walking the clk tree with the prepare_lock held. Similarly, call clk_pm_runtime_put() without the prepare_lock held to properly drop the runtime PM reference. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. Reported-by: Douglas Anderson <dianders@chromium.org> Closes: https://lore.kernel.org/all/20220922084322.RFC.2.I375b6b9e0a0a5348962f004beb3dafee6a12dfbb@changeid/ [1] Closes: https://issuetracker.google.com/328070191 Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240325184204.745706-5-sboyd@kernel.org Reviewed-by: Douglas Anderson <dianders@chromium.org>
2024-03-25 11:41:58 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Don't parent clks until the parent is fully registered Before commit fc0c209c147f ("clk: Allow parents to be specified without string names") child clks couldn't find their parent until the parent clk was added to a list in __clk_core_init(). After that commit, child clks can reference their parent clks directly via a clk_hw pointer, or they can lookup that clk_hw pointer via DT if the parent clk is registered with an OF clk provider. The common clk framework treats hw->core being non-NULL as "the clk is registered" per the logic within clk_core_fill_parent_index(): parent = entry->hw->core; /* * We have a direct reference but it isn't registered yet? * Orphan it and let clk_reparent() update the orphan status * when the parent is registered. */ if (!parent) Therefore we need to be extra careful to not set hw->core until the clk is fully registered with the clk framework. Otherwise we can get into a situation where a child finds a parent clk and we move the child clk off the orphan list when the parent isn't actually registered, wrecking our enable accounting and breaking critical clks. Consider the following scenario: CPU0 CPU1 ---- ---- struct clk_hw clkBad; struct clk_hw clkA; clkA.init.parent_hws = { &clkBad }; clk_hw_register(&clkA) clk_hw_register(&clkBad) ... __clk_register() hw->core = core ... __clk_register() __clk_core_init() clk_prepare_lock() __clk_init_parent() clk_core_get_parent_by_index() clk_core_fill_parent_index() if (entry->hw) { parent = entry->hw->core; At this point, 'parent' points to clkBad even though clkBad hasn't been fully registered yet. Ouch! A similar problem can happen if a clk controller registers orphan clks that are referenced in the DT node of another clk controller. Let's fix all this by only setting the hw->core pointer underneath the clk prepare lock in __clk_core_init(). This way we know that clk_core_fill_parent_index() can't see hw->core be non-NULL until the clk is fully registered. Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20211109043438.4639-1-quic_mdtipton@quicinc.com [sboyd@kernel.org: Reword commit text, update comment] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-11-08 20:34:38 -08:00
clk: Allow parents to be specified without string names The common clk framework is lacking in ability to describe the clk topology without specifying strings for every possible parent-child link. There are a few drawbacks to the current approach: 1) String comparisons are used for everything, including describing topologies that are 'local' to a single clock controller. 2) clk providers (e.g. i2c clk drivers) need to create globally unique clk names to avoid collisions in the clk namespace, leading to awkward name generation code in various clk drivers. 3) DT bindings may not fully describe the clk topology and linkages between clk controllers because drivers can easily rely on globally unique strings to describe connections between clks. This leads to confusing DT bindings, complicated clk name generation code, and inefficient string comparisons during clk registration just so that the clk framework can detect the topology of the clk tree. Furthermore, some drivers call clk_get() and then __clk_get_name() to extract the globally unique clk name just so they can specify the parent of the clk they're registering. We have of_clk_parent_fill() but that mostly only works for single clks registered from a DT node, which isn't the norm. Let's simplify this all by introducing two new ways of specifying clk parents. The first method is an array of pointers to clk_hw structures corresponding to the parents at that index. This works for clks that are registered when we have access to all the clk_hw pointers for the parents. The second method is a mix of clk_hw pointers and strings of local and global parent clk names. If the .fw_name member of the map is set we'll look for that clk by performing a DT based lookup of the device the clk is registered with and the .name specified in the map. If that fails, we'll fallback to the .name member and perform a global clk name lookup like we've always done before. Using either one of these new methods is entirely optional. Existing drivers will continue to work, and they can migrate to this new approach as they see fit. Eventually, we'll want to get rid of the 'parent_names' array in struct clk_init_data and use one of these new methods instead. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh@kernel.org> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 11:31:47 -07:00
clk: Use a separate struct for holding init data. Create a struct clk_init_data to hold all data that needs to be passed from the platfrom specific driver to the common clock framework during clock registration. Add a pointer to this struct inside clk_hw. This has several advantages: * Completely hides struct clk from many clock platform drivers and static clock initialization code that don't care for static initialization of the struct clks. * For platforms that want to do complete static initialization, it removed the need to directly mess with the struct clk's fields while still allowing to statically allocate struct clk. This keeps the code more future proof even if they include clk-private.h. * Simplifies the generic clk_register() function and allows adding optional fields in the future without modifying the function signature. * Simplifies the static initialization of clocks on all platforms by removing the need for forward delcarations or convoluted macros. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [mturquette@linaro.org: kept DEFINE_CLK_* macros and __clk_init] Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jamie Iles <jamie@jamieiles.com> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca>
2012-04-25 22:58:56 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Use parent node pointer during registration if necessary Sometimes clk drivers are attached to devices which are children of a parent device that is connected to a node in DT. This happens when devices are MFD-ish and the parent device driver mostly registers child devices to match against drivers placed in their respective subsystem directories like drivers/clk, drivers/regulator, etc. When the clk driver calls clk_register() with a device pointer, that struct device pointer won't have a device_node associated with it because it was created purely in software as a way to partition logic to a subsystem. This causes problems for the way we find parent clks for the clks registered by these child devices because we look at the registering device's device_node pointer to lookup 'clocks' and 'clock-names' properties. Let's use the parent device's device_node pointer if the registering device doesn't have a device_node but the parent does. This simplifies clk registration code by avoiding the need to assign some device_node to the device registering the clk. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20191230190455.141339-1-sboyd@kernel.org [sboyd@kernel.org: Fixup kernel-doc notation] Reviewed-by: Niklas Cassel <nks@flawful.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-30 10:29:35 -08:00
clk: Use parent node pointer during registration if necessary Sometimes clk drivers are attached to devices which are children of a parent device that is connected to a node in DT. This happens when devices are MFD-ish and the parent device driver mostly registers child devices to match against drivers placed in their respective subsystem directories like drivers/clk, drivers/regulator, etc. When the clk driver calls clk_register() with a device pointer, that struct device pointer won't have a device_node associated with it because it was created purely in software as a way to partition logic to a subsystem. This causes problems for the way we find parent clks for the clks registered by these child devices because we look at the registering device's device_node pointer to lookup 'clocks' and 'clock-names' properties. Let's use the parent device's device_node pointer if the registering device doesn't have a device_node but the parent does. This simplifies clk registration code by avoiding the need to assign some device_node to the device registering the clk. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20191230190455.141339-1-sboyd@kernel.org [sboyd@kernel.org: Fixup kernel-doc notation] Reviewed-by: Niklas Cassel <nks@flawful.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-30 10:29:35 -08:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: Use parent node pointer during registration if necessary Sometimes clk drivers are attached to devices which are children of a parent device that is connected to a node in DT. This happens when devices are MFD-ish and the parent device driver mostly registers child devices to match against drivers placed in their respective subsystem directories like drivers/clk, drivers/regulator, etc. When the clk driver calls clk_register() with a device pointer, that struct device pointer won't have a device_node associated with it because it was created purely in software as a way to partition logic to a subsystem. This causes problems for the way we find parent clks for the clks registered by these child devices because we look at the registering device's device_node pointer to lookup 'clocks' and 'clock-names' properties. Let's use the parent device's device_node pointer if the registering device doesn't have a device_node but the parent does. This simplifies clk registration code by avoiding the need to assign some device_node to the device registering the clk. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20191230190455.141339-1-sboyd@kernel.org [sboyd@kernel.org: Fixup kernel-doc notation] Reviewed-by: Niklas Cassel <nks@flawful.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-30 10:29:35 -08:00
clk: Evict unregistered clks from parent caches We leave a dangling pointer in each clk_core::parents array that has an unregistered clk as a potential parent when that clk_core pointer is freed by clk{_hw}_unregister(). It is impossible for the true parent of a clk to be set with clk_set_parent() once the dangling pointer is left in the cache because we compare parent pointers in clk_fetch_parent_index() instead of checking for a matching clk name or clk_hw pointer. Before commit ede77858473a ("clk: Remove global clk traversal on fetch parent index"), we would check clk_hw pointers, which has a higher chance of being the same between registration and unregistration, but it can still be allocated and freed by the clk provider. In fact, this has been a long standing problem since commit da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()") where we stopped trying to compare clk names and skipped over entries in the cache that weren't NULL. There are good (performance) reasons to not do the global tree lookup in cases where the cache holds dangling pointers to parents that have been unregistered. Let's take the performance hit on the uncommon registration path instead. Loop through all the clk_core::parents arrays when a clk is unregistered and set the entry to NULL when the parent cache entry and clk being unregistered are the same pointer. This will fix this problem and avoid the overhead for the "normal" case. Based on a patch by Bjorn Andersson. Fixes: da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190828181959.204401-1-sboyd@kernel.org
2019-08-28 11:19:59 -07:00
clk: Evict unregistered clks from parent caches We leave a dangling pointer in each clk_core::parents array that has an unregistered clk as a potential parent when that clk_core pointer is freed by clk{_hw}_unregister(). It is impossible for the true parent of a clk to be set with clk_set_parent() once the dangling pointer is left in the cache because we compare parent pointers in clk_fetch_parent_index() instead of checking for a matching clk name or clk_hw pointer. Before commit ede77858473a ("clk: Remove global clk traversal on fetch parent index"), we would check clk_hw pointers, which has a higher chance of being the same between registration and unregistration, but it can still be allocated and freed by the clk provider. In fact, this has been a long standing problem since commit da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()") where we stopped trying to compare clk names and skipped over entries in the cache that weren't NULL. There are good (performance) reasons to not do the global tree lookup in cases where the cache holds dangling pointers to parents that have been unregistered. Let's take the performance hit on the uncommon registration path instead. Loop through all the clk_core::parents arrays when a clk is unregistered and set the entry to NULL when the parent cache entry and clk being unregistered are the same pointer. This will fix this problem and avoid the overhead for the "normal" case. Based on a patch by Bjorn Andersson. Fixes: da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190828181959.204401-1-sboyd@kernel.org
2019-08-28 11:19:59 -07:00
clk: Evict unregistered clks from parent caches We leave a dangling pointer in each clk_core::parents array that has an unregistered clk as a potential parent when that clk_core pointer is freed by clk{_hw}_unregister(). It is impossible for the true parent of a clk to be set with clk_set_parent() once the dangling pointer is left in the cache because we compare parent pointers in clk_fetch_parent_index() instead of checking for a matching clk name or clk_hw pointer. Before commit ede77858473a ("clk: Remove global clk traversal on fetch parent index"), we would check clk_hw pointers, which has a higher chance of being the same between registration and unregistration, but it can still be allocated and freed by the clk provider. In fact, this has been a long standing problem since commit da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()") where we stopped trying to compare clk names and skipped over entries in the cache that weren't NULL. There are good (performance) reasons to not do the global tree lookup in cases where the cache holds dangling pointers to parents that have been unregistered. Let's take the performance hit on the uncommon registration path instead. Loop through all the clk_core::parents arrays when a clk is unregistered and set the entry to NULL when the parent cache entry and clk being unregistered are the same pointer. This will fix this problem and avoid the overhead for the "normal" case. Based on a patch by Bjorn Andersson. Fixes: da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190828181959.204401-1-sboyd@kernel.org
2019-08-28 11:19:59 -07:00
clk: Don't hold prepare_lock across debugfs creation Rob Clark reports a lockdep splat that involves the prepare_lock chained with the mmap semaphore. ====================================================== [ INFO: possible circular locking dependency detected ] 3.17.0-rc1-00050-g07a489b #802 Tainted: G W ------------------------------------------------------- Xorg.bin/5413 is trying to acquire lock: (prepare_lock){+.+.+.}, at: [<c0781280>] clk_prepare_lock+0x88/0xfc but task is already holding lock: (qcom_iommu_lock){+.+...}, at: [<c079f664>] qcom_iommu_unmap+0x1c/0x1f0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (qcom_iommu_lock){+.+...}: [<c079f860>] qcom_iommu_map+0x28/0x450 [<c079eb50>] iommu_map+0xc8/0x12c [<c056c1fc>] msm_iommu_map+0xb4/0x130 [<c05697bc>] msm_gem_get_iova_locked+0x9c/0xe8 [<c0569854>] msm_gem_get_iova+0x4c/0x64 [<c0562208>] mdp4_kms_init+0x4c4/0x6c0 [<c056881c>] msm_load+0x2ac/0x34c [<c0545724>] drm_dev_register+0xac/0x108 [<c0547510>] drm_platform_init+0x50/0xf0 [<c0578a60>] try_to_bring_up_master.part.3+0xc8/0x108 [<c0578b48>] component_master_add_with_match+0xa8/0x104 [<c0568294>] msm_pdev_probe+0x64/0x70 [<c057e704>] platform_drv_probe+0x2c/0x60 [<c057cff8>] driver_probe_device+0x108/0x234 [<c057b65c>] bus_for_each_drv+0x64/0x98 [<c057cec0>] device_attach+0x78/0x8c [<c057c590>] bus_probe_device+0x88/0xac [<c057c9b8>] deferred_probe_work_func+0x68/0x9c [<c0259db4>] process_one_work+0x1a0/0x40c [<c025a710>] worker_thread+0x44/0x4d8 [<c025ec54>] kthread+0xd8/0xec [<c020e9a8>] ret_from_fork+0x14/0x2c -> #3 (&dev->struct_mutex){+.+.+.}: [<c0541188>] drm_gem_mmap+0x38/0xd0 [<c05695b8>] msm_gem_mmap+0xc/0x5c [<c02f0b6c>] mmap_region+0x35c/0x6c8 [<c02f11ec>] do_mmap_pgoff+0x314/0x398 [<c02de1e0>] vm_mmap_pgoff+0x84/0xb4 [<c02ef83c>] SyS_mmap_pgoff+0x94/0xbc [<c020e8e0>] ret_fast_syscall+0x0/0x48 -> #2 (&mm->mmap_sem){++++++}: [<c0321138>] filldir64+0x68/0x180 [<c0333fe0>] dcache_readdir+0x188/0x22c [<c0320ed0>] iterate_dir+0x9c/0x11c [<c03213b0>] SyS_getdents64+0x78/0xe8 [<c020e8e0>] ret_fast_syscall+0x0/0x48 -> #1 (&sb->s_type->i_mutex_key#3){+.+.+.}: [<c03fc544>] __create_file+0x58/0x1dc [<c03fc70c>] debugfs_create_dir+0x1c/0x24 [<c0781c7c>] clk_debug_create_subtree+0x20/0x170 [<c0be2af8>] clk_debug_init+0xec/0x14c [<c0208c70>] do_one_initcall+0x8c/0x1c8 [<c0b9cce4>] kernel_init_freeable+0x13c/0x1dc [<c0877bc4>] kernel_init+0x8/0xe8 [<c020e9a8>] ret_from_fork+0x14/0x2c -> #0 (prepare_lock){+.+.+.}: [<c087c408>] mutex_lock_nested+0x70/0x3e8 [<c0781280>] clk_prepare_lock+0x88/0xfc [<c0782c50>] clk_prepare+0xc/0x24 [<c079f474>] __enable_clocks.isra.4+0x18/0xa4 [<c079f614>] __flush_iotlb_va+0xe0/0x114 [<c079f6f4>] qcom_iommu_unmap+0xac/0x1f0 [<c079ea3c>] iommu_unmap+0x9c/0xe8 [<c056c2fc>] msm_iommu_unmap+0x64/0x84 [<c0569da4>] msm_gem_free_object+0x11c/0x338 [<c05413ec>] drm_gem_object_handle_unreference_unlocked+0xfc/0x130 [<c0541604>] drm_gem_object_release_handle+0x50/0x68 [<c0447a98>] idr_for_each+0xa8/0xdc [<c0541c10>] drm_gem_release+0x1c/0x28 [<c0540b3c>] drm_release+0x370/0x428 [<c031105c>] __fput+0x98/0x1e8 [<c025d73c>] task_work_run+0xb0/0xfc [<c02477ec>] do_exit+0x2ec/0x948 [<c0247ec0>] do_group_exit+0x4c/0xb8 [<c025180c>] get_signal+0x28c/0x6ac [<c0211204>] do_signal+0xc4/0x3e4 [<c02116cc>] do_work_pending+0xb4/0xc4 [<c020e938>] work_pending+0xc/0x20 other info that might help us debug this: Chain exists of: prepare_lock --> &dev->struct_mutex --> qcom_iommu_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(qcom_iommu_lock); lock(&dev->struct_mutex); lock(qcom_iommu_lock); lock(prepare_lock); *** DEADLOCK *** 3 locks held by Xorg.bin/5413: #0: (drm_global_mutex){+.+.+.}, at: [<c0540800>] drm_release+0x34/0x428 #1: (&dev->struct_mutex){+.+.+.}, at: [<c05413bc>] drm_gem_object_handle_unreference_unlocked+0xcc/0x130 #2: (qcom_iommu_lock){+.+...}, at: [<c079f664>] qcom_iommu_unmap+0x1c/0x1f0 stack backtrace: CPU: 1 PID: 5413 Comm: Xorg.bin Tainted: G W 3.17.0-rc1-00050-g07a489b #802 [<c0216290>] (unwind_backtrace) from [<c0211d8c>] (show_stack+0x10/0x14) [<c0211d8c>] (show_stack) from [<c087a078>] (dump_stack+0x98/0xb8) [<c087a078>] (dump_stack) from [<c027f024>] (print_circular_bug+0x218/0x340) [<c027f024>] (print_circular_bug) from [<c0283e08>] (__lock_acquire+0x1d24/0x20b8) [<c0283e08>] (__lock_acquire) from [<c0284774>] (lock_acquire+0x9c/0xbc) [<c0284774>] (lock_acquire) from [<c087c408>] (mutex_lock_nested+0x70/0x3e8) [<c087c408>] (mutex_lock_nested) from [<c0781280>] (clk_prepare_lock+0x88/0xfc) [<c0781280>] (clk_prepare_lock) from [<c0782c50>] (clk_prepare+0xc/0x24) [<c0782c50>] (clk_prepare) from [<c079f474>] (__enable_clocks.isra.4+0x18/0xa4) [<c079f474>] (__enable_clocks.isra.4) from [<c079f614>] (__flush_iotlb_va+0xe0/0x114) [<c079f614>] (__flush_iotlb_va) from [<c079f6f4>] (qcom_iommu_unmap+0xac/0x1f0) [<c079f6f4>] (qcom_iommu_unmap) from [<c079ea3c>] (iommu_unmap+0x9c/0xe8) [<c079ea3c>] (iommu_unmap) from [<c056c2fc>] (msm_iommu_unmap+0x64/0x84) [<c056c2fc>] (msm_iommu_unmap) from [<c0569da4>] (msm_gem_free_object+0x11c/0x338) [<c0569da4>] (msm_gem_free_object) from [<c05413ec>] (drm_gem_object_handle_unreference_unlocked+0xfc/0x130) [<c05413ec>] (drm_gem_object_handle_unreference_unlocked) from [<c0541604>] (drm_gem_object_release_handle+0x50/0x68) [<c0541604>] (drm_gem_object_release_handle) from [<c0447a98>] (idr_for_each+0xa8/0xdc) [<c0447a98>] (idr_for_each) from [<c0541c10>] (drm_gem_release+0x1c/0x28) [<c0541c10>] (drm_gem_release) from [<c0540b3c>] (drm_release+0x370/0x428) [<c0540b3c>] (drm_release) from [<c031105c>] (__fput+0x98/0x1e8) [<c031105c>] (__fput) from [<c025d73c>] (task_work_run+0xb0/0xfc) [<c025d73c>] (task_work_run) from [<c02477ec>] (do_exit+0x2ec/0x948) [<c02477ec>] (do_exit) from [<c0247ec0>] (do_group_exit+0x4c/0xb8) [<c0247ec0>] (do_group_exit) from [<c025180c>] (get_signal+0x28c/0x6ac) [<c025180c>] (get_signal) from [<c0211204>] (do_signal+0xc4/0x3e4) [<c0211204>] (do_signal) from [<c02116cc>] (do_work_pending+0xb4/0xc4) [<c02116cc>] (do_work_pending) from [<c020e938>] (work_pending+0xc/0x20) We can break this chain if we don't hold the prepare_lock while creating debugfs directories. We only hold the prepare_lock right now because we're traversing the clock tree recursively and we don't want the hierarchy to change during the traversal. Replacing this traversal with a simple linked list walk allows us to only grab a list lock instead of the prepare_lock, thus breaking the lock chain. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-04 23:37:49 -07:00
clk: Fix slab corruption in clk_unregister() When a clock is unregsitered, we iterate over the list of children and reparent them to NULL (i.e. orphan list). While iterating the list, we should use the safe iterators because the children list for this clock is changing when we reparent the children to NULL. Failure to iterate safely can lead to slab corruption like this: ============================================================================= BUG kmalloc-128 (Not tainted): Poison overwritten ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0xed0c4900-0xed0c4903. First byte 0x0 instead of 0x6b INFO: Allocated in clk_register+0x20/0x1bc age=297 cpu=2 pid=70 __slab_alloc.isra.39.constprop.42+0x410/0x454 kmem_cache_alloc_trace+0x200/0x24c clk_register+0x20/0x1bc devm_clk_register+0x34/0x68 0xbf0000f0 platform_drv_probe+0x18/0x48 driver_probe_device+0x94/0x360 __driver_attach+0x94/0x98 bus_for_each_dev+0x54/0x88 bus_add_driver+0xe8/0x204 driver_register+0x78/0xf4 do_one_initcall+0xc4/0x17c load_module+0x19ac/0x2294 SyS_init_module+0xa4/0x110 ret_fast_syscall+0x0/0x48 INFO: Freed in clk_unregister+0xd4/0x140 age=23 cpu=2 pid=73 __slab_free+0x38/0x41c clk_unregister+0xd4/0x140 release_nodes+0x164/0x1d8 __device_release_driver+0x60/0xb0 driver_detach+0xb4/0xb8 bus_remove_driver+0x5c/0xc4 SyS_delete_module+0x148/0x1d8 ret_fast_syscall+0x0/0x48 INFO: Slab 0xeec50b90 objects=25 used=0 fp=0xed0c5400 flags=0x4080 INFO: Object 0xed0c48c0 @offset=2240 fp=0xed0c4a00 Bytes b4 ed0c48b0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Object ed0c48c0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c48d0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c48e0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c48f0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c4900: 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ....kkkkkkkkkkkk Object ed0c4910: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c4920: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ed0c4930: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. Redzone ed0c4940: bb bb bb bb .... Padding ed0c49e8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Padding ed0c49f8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 3 PID: 75 Comm: mdev Tainted: G B 3.14.0-11033-g2054ba5ca781 #35 [<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14) [<c0012240>] (show_stack) from [<c04b74a0>] (dump_stack+0x70/0xbc) [<c04b74a0>] (dump_stack) from [<c00f7a78>] (check_bytes_and_report+0xbc/0x100) [<c00f7a78>] (check_bytes_and_report) from [<c00f7c48>] (check_object+0x18c/0x218) [<c00f7c48>] (check_object) from [<c00f7efc>] (__free_slab+0x104/0x144) [<c00f7efc>] (__free_slab) from [<c04b6668>] (__slab_free+0x3dc/0x41c) [<c04b6668>] (__slab_free) from [<c014c008>] (load_elf_binary+0x88/0x12b4) [<c014c008>] (load_elf_binary) from [<c0105a44>] (search_binary_handler+0x78/0x18c) [<c0105a44>] (search_binary_handler) from [<c0106fc0>] (do_execve+0x490/0x5dc) [<c0106fc0>] (do_execve) from [<c0036b8c>] (____call_usermodehelper+0x134/0x168) [<c0036b8c>] (____call_usermodehelper) from [<c000f048>] (ret_from_fork+0x14/0x2c) FIX kmalloc-128: Restoring 0xed0c4900-0xed0c4903=0x6b Fixes: fcb0ee6a3d33 (clk: Implement clk_unregister) Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@vger.kernel.org
2014-04-18 16:29:43 -07:00
clk: Evict unregistered clks from parent caches We leave a dangling pointer in each clk_core::parents array that has an unregistered clk as a potential parent when that clk_core pointer is freed by clk{_hw}_unregister(). It is impossible for the true parent of a clk to be set with clk_set_parent() once the dangling pointer is left in the cache because we compare parent pointers in clk_fetch_parent_index() instead of checking for a matching clk name or clk_hw pointer. Before commit ede77858473a ("clk: Remove global clk traversal on fetch parent index"), we would check clk_hw pointers, which has a higher chance of being the same between registration and unregistration, but it can still be allocated and freed by the clk provider. In fact, this has been a long standing problem since commit da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()") where we stopped trying to compare clk names and skipped over entries in the cache that weren't NULL. There are good (performance) reasons to not do the global tree lookup in cases where the cache holds dangling pointers to parents that have been unregistered. Let's take the performance hit on the uncommon registration path instead. Loop through all the clk_core::parents arrays when a clk is unregistered and set the entry to NULL when the parent cache entry and clk being unregistered are the same pointer. This will fix this problem and avoid the overhead for the "normal" case. Based on a patch by Bjorn Andersson. Fixes: da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190828181959.204401-1-sboyd@kernel.org
2019-08-28 11:19:59 -07:00
clk: Use hashtable for global clk lookups A clk lookup using clk_core_lookup() is currently somewhat expensive since it has to walk the whole clk tree to find a match. This is extremely bad in the clk_core_init() function where it is used to look for clk name conflicts, which is always the worst case of walking the whole tree. Moreover, the number of clks checked increases as more clks are registered, causing each subsequent clk registration becoming slower. Add a hashtable for doing clk lookups to replace the tree walk method. On arm64 this increases kernel memory usage by 4 KB for the hashtable, and 16 bytes (2 pointers) for |struct hlist_node| in each clk. On a platform with around 800 clks, this reduces the time spent in clk_core_lookup() significantly: | PID 0 | kworker | | before | after | before | after | ------------------------------------------- avg | 203 us | 2.7 us | 123 us | 1.5 us | ------------------------------------------- min | 4.7 us | 2.3 us | 102 us | 0.9 us | ------------------------------------------- max | 867 us | 4.8 us | 237 us | 3.5 us | ------------------------------------------- culm | 109 ms | 1.5 ms | 21 ms | 0.3 ms | This in turn reduces the time spent in clk_hw_register(), and ultimately, boot time. On a different system with close to 700 clks, This reduces boot time by around 110 ms. While this doesn't seem like a lot, this helps in cases where minimizing boot time is important. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-08-14 11:53:16 +08:00
clk: Fix double free due to devm_clk_register() Now that clk_unregister() frees the struct clk we're unregistering we'll free memory twice: first we'll call kfree() in __clk_release() with an address kmalloc doesn't know about and second we'll call kfree() in the devres layer. Remove the allocation of struct clk in devm_clk_register() and let clk_release() handle it. This fixes slab errors like: ============================================================================= BUG kmalloc-128 (Not tainted): Invalid object pointer 0xed08e8d0 ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xeec503f8 objects=25 used=15 fp=0xed08ea00 flags=0x4081 CPU: 2 PID: 73 Comm: rmmod Tainted: G B 3.14.0-11032-g526e9c764381 #34 [<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14) [<c0012240>] (show_stack) from [<c04b74dc>] (dump_stack+0x70/0xbc) [<c04b74dc>] (dump_stack) from [<c00f6778>] (slab_err+0x74/0x84) [<c00f6778>] (slab_err) from [<c04b6278>] (free_debug_processing+0x2cc/0x31c) [<c04b6278>] (free_debug_processing) from [<c04b6300>] (__slab_free+0x38/0x41c) [<c04b6300>] (__slab_free) from [<c03931bc>] (clk_unregister+0xd4/0x140) [<c03931bc>] (clk_unregister) from [<c02fb774>] (release_nodes+0x164/0x1d8) [<c02fb774>] (release_nodes) from [<c02f8698>] (__device_release_driver+0x60/0xb0) [<c02f8698>] (__device_release_driver) from [<c02f9080>] (driver_detach+0xb4/0xb8) [<c02f9080>] (driver_detach) from [<c02f8480>] (bus_remove_driver+0x5c/0xc4) [<c02f8480>] (bus_remove_driver) from [<c008c9b8>] (SyS_delete_module+0x148/0x1d8) [<c008c9b8>] (SyS_delete_module) from [<c000ef80>] (ret_fast_syscall+0x0/0x48) FIX kmalloc-128: Object at 0xed08e8d0 not freed Fixes: fcb0ee6a3d33 (clk: Implement clk_unregister) Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@vger.kernel.org
2014-04-18 16:29:42 -07:00
clk: Fix double free due to devm_clk_register() Now that clk_unregister() frees the struct clk we're unregistering we'll free memory twice: first we'll call kfree() in __clk_release() with an address kmalloc doesn't know about and second we'll call kfree() in the devres layer. Remove the allocation of struct clk in devm_clk_register() and let clk_release() handle it. This fixes slab errors like: ============================================================================= BUG kmalloc-128 (Not tainted): Invalid object pointer 0xed08e8d0 ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xeec503f8 objects=25 used=15 fp=0xed08ea00 flags=0x4081 CPU: 2 PID: 73 Comm: rmmod Tainted: G B 3.14.0-11032-g526e9c764381 #34 [<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14) [<c0012240>] (show_stack) from [<c04b74dc>] (dump_stack+0x70/0xbc) [<c04b74dc>] (dump_stack) from [<c00f6778>] (slab_err+0x74/0x84) [<c00f6778>] (slab_err) from [<c04b6278>] (free_debug_processing+0x2cc/0x31c) [<c04b6278>] (free_debug_processing) from [<c04b6300>] (__slab_free+0x38/0x41c) [<c04b6300>] (__slab_free) from [<c03931bc>] (clk_unregister+0xd4/0x140) [<c03931bc>] (clk_unregister) from [<c02fb774>] (release_nodes+0x164/0x1d8) [<c02fb774>] (release_nodes) from [<c02f8698>] (__device_release_driver+0x60/0xb0) [<c02f8698>] (__device_release_driver) from [<c02f9080>] (driver_detach+0xb4/0xb8) [<c02f9080>] (driver_detach) from [<c02f8480>] (bus_remove_driver+0x5c/0xc4) [<c02f8480>] (bus_remove_driver) from [<c008c9b8>] (SyS_delete_module+0x148/0x1d8) [<c008c9b8>] (SyS_delete_module) from [<c000ef80>] (ret_fast_syscall+0x0/0x48) FIX kmalloc-128: Object at 0xed08e8d0 not freed Fixes: fcb0ee6a3d33 (clk: Implement clk_unregister) Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@vger.kernel.org
2014-04-18 16:29:42 -07:00
clk: Fix double free due to devm_clk_register() Now that clk_unregister() frees the struct clk we're unregistering we'll free memory twice: first we'll call kfree() in __clk_release() with an address kmalloc doesn't know about and second we'll call kfree() in the devres layer. Remove the allocation of struct clk in devm_clk_register() and let clk_release() handle it. This fixes slab errors like: ============================================================================= BUG kmalloc-128 (Not tainted): Invalid object pointer 0xed08e8d0 ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xeec503f8 objects=25 used=15 fp=0xed08ea00 flags=0x4081 CPU: 2 PID: 73 Comm: rmmod Tainted: G B 3.14.0-11032-g526e9c764381 #34 [<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14) [<c0012240>] (show_stack) from [<c04b74dc>] (dump_stack+0x70/0xbc) [<c04b74dc>] (dump_stack) from [<c00f6778>] (slab_err+0x74/0x84) [<c00f6778>] (slab_err) from [<c04b6278>] (free_debug_processing+0x2cc/0x31c) [<c04b6278>] (free_debug_processing) from [<c04b6300>] (__slab_free+0x38/0x41c) [<c04b6300>] (__slab_free) from [<c03931bc>] (clk_unregister+0xd4/0x140) [<c03931bc>] (clk_unregister) from [<c02fb774>] (release_nodes+0x164/0x1d8) [<c02fb774>] (release_nodes) from [<c02f8698>] (__device_release_driver+0x60/0xb0) [<c02f8698>] (__device_release_driver) from [<c02f9080>] (driver_detach+0xb4/0xb8) [<c02f9080>] (driver_detach) from [<c02f8480>] (bus_remove_driver+0x5c/0xc4) [<c02f8480>] (bus_remove_driver) from [<c008c9b8>] (SyS_delete_module+0x148/0x1d8) [<c008c9b8>] (SyS_delete_module) from [<c000ef80>] (ret_fast_syscall+0x0/0x48) FIX kmalloc-128: Object at 0xed08e8d0 not freed Fixes: fcb0ee6a3d33 (clk: Implement clk_unregister) Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@vger.kernel.org
2014-04-18 16:29:42 -07:00
clk: Fix double free due to devm_clk_register() Now that clk_unregister() frees the struct clk we're unregistering we'll free memory twice: first we'll call kfree() in __clk_release() with an address kmalloc doesn't know about and second we'll call kfree() in the devres layer. Remove the allocation of struct clk in devm_clk_register() and let clk_release() handle it. This fixes slab errors like: ============================================================================= BUG kmalloc-128 (Not tainted): Invalid object pointer 0xed08e8d0 ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xeec503f8 objects=25 used=15 fp=0xed08ea00 flags=0x4081 CPU: 2 PID: 73 Comm: rmmod Tainted: G B 3.14.0-11032-g526e9c764381 #34 [<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14) [<c0012240>] (show_stack) from [<c04b74dc>] (dump_stack+0x70/0xbc) [<c04b74dc>] (dump_stack) from [<c00f6778>] (slab_err+0x74/0x84) [<c00f6778>] (slab_err) from [<c04b6278>] (free_debug_processing+0x2cc/0x31c) [<c04b6278>] (free_debug_processing) from [<c04b6300>] (__slab_free+0x38/0x41c) [<c04b6300>] (__slab_free) from [<c03931bc>] (clk_unregister+0xd4/0x140) [<c03931bc>] (clk_unregister) from [<c02fb774>] (release_nodes+0x164/0x1d8) [<c02fb774>] (release_nodes) from [<c02f8698>] (__device_release_driver+0x60/0xb0) [<c02f8698>] (__device_release_driver) from [<c02f9080>] (driver_detach+0xb4/0xb8) [<c02f9080>] (driver_detach) from [<c02f8480>] (bus_remove_driver+0x5c/0xc4) [<c02f8480>] (bus_remove_driver) from [<c008c9b8>] (SyS_delete_module+0x148/0x1d8) [<c008c9b8>] (SyS_delete_module) from [<c000ef80>] (ret_fast_syscall+0x0/0x48) FIX kmalloc-128: Object at 0xed08e8d0 not freed Fixes: fcb0ee6a3d33 (clk: Implement clk_unregister) Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@vger.kernel.org
2014-04-18 16:29:42 -07:00
clk: Fix double free due to devm_clk_register() Now that clk_unregister() frees the struct clk we're unregistering we'll free memory twice: first we'll call kfree() in __clk_release() with an address kmalloc doesn't know about and second we'll call kfree() in the devres layer. Remove the allocation of struct clk in devm_clk_register() and let clk_release() handle it. This fixes slab errors like: ============================================================================= BUG kmalloc-128 (Not tainted): Invalid object pointer 0xed08e8d0 ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xeec503f8 objects=25 used=15 fp=0xed08ea00 flags=0x4081 CPU: 2 PID: 73 Comm: rmmod Tainted: G B 3.14.0-11032-g526e9c764381 #34 [<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14) [<c0012240>] (show_stack) from [<c04b74dc>] (dump_stack+0x70/0xbc) [<c04b74dc>] (dump_stack) from [<c00f6778>] (slab_err+0x74/0x84) [<c00f6778>] (slab_err) from [<c04b6278>] (free_debug_processing+0x2cc/0x31c) [<c04b6278>] (free_debug_processing) from [<c04b6300>] (__slab_free+0x38/0x41c) [<c04b6300>] (__slab_free) from [<c03931bc>] (clk_unregister+0xd4/0x140) [<c03931bc>] (clk_unregister) from [<c02fb774>] (release_nodes+0x164/0x1d8) [<c02fb774>] (release_nodes) from [<c02f8698>] (__device_release_driver+0x60/0xb0) [<c02f8698>] (__device_release_driver) from [<c02f9080>] (driver_detach+0xb4/0xb8) [<c02f9080>] (driver_detach) from [<c02f8480>] (bus_remove_driver+0x5c/0xc4) [<c02f8480>] (bus_remove_driver) from [<c008c9b8>] (SyS_delete_module+0x148/0x1d8) [<c008c9b8>] (SyS_delete_module) from [<c000ef80>] (ret_fast_syscall+0x0/0x48) FIX kmalloc-128: Object at 0xed08e8d0 not freed Fixes: fcb0ee6a3d33 (clk: Implement clk_unregister) Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@vger.kernel.org
2014-04-18 16:29:42 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: fix invalid usage of list cursor in register Fix invalid usage of a list_for_each_entry cursor in clk_notifier_register(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490ef11 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-1-lb@semihalf.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-02 00:51:48 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: fix invalid usage of list cursor in register Fix invalid usage of a list_for_each_entry cursor in clk_notifier_register(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490ef11 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-1-lb@semihalf.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-02 00:51:48 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: fix invalid usage of list cursor in register Fix invalid usage of a list_for_each_entry cursor in clk_notifier_register(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490ef11 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-1-lb@semihalf.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-02 00:51:48 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: fix invalid usage of list cursor in register Fix invalid usage of a list_for_each_entry cursor in clk_notifier_register(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490ef11 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-1-lb@semihalf.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-02 00:51:48 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: fix invalid usage of list cursor in register Fix invalid usage of a list_for_each_entry cursor in clk_notifier_register(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490ef11 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-1-lb@semihalf.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-02 00:51:48 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: fix invalid usage of list cursor in unregister Fix invalid usage of a list_for_each_entry cursor in clk_notifier_unregister(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The patch fixes a logical bug that hasn't been seen in pratice however it is analogus to the bug fixed in clk_notifier_register(). The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490ef11 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-2-lb@semihalf.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-02 00:51:49 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: fix invalid usage of list cursor in unregister Fix invalid usage of a list_for_each_entry cursor in clk_notifier_unregister(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The patch fixes a logical bug that hasn't been seen in pratice however it is analogus to the bug fixed in clk_notifier_register(). The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490ef11 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-2-lb@semihalf.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-02 00:51:49 +02:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <rob.herring <at> calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Arnd Bergman <arnd.bergmann@linaro.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Richard Zhao <richard.zhao@linaro.org> Cc: Saravana Kannan <skannan@codeaurora.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Deepak Saxena <dsaxena@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15 23:11:19 -07:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: Convert to using %pOF instead of full_name Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "Emilio López" <emilio@elopez.com.ar> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-omap@vger.kernel.org Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-07-18 16:42:52 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: Convert to using %pOF instead of full_name Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "Emilio López" <emilio@elopez.com.ar> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-omap@vger.kernel.org Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: James Liao <jamesjj.liao@mediatek.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-07-18 16:42:52 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: check for disabled clock-provider in of_clk_get_hw_from_clkspec() of_clk_get_hw_from_clkspec() checks all available clock-providers by comparing their of nodes to the one from the clkspec. If no matching clock provider is found, the function returns -EPROBE_DEFER to cause a re-check at a later date. If a matching clock provider is found, an authoritative answer can be retrieved from it whether the clock exists or not. This does not take into account that the clock-provider may never appear, because it's node is disabled. This can happen when a clock is optional, provided by a separate block which never gets enabled. One example of this happening is the rk3588's VOP, which has optional additional display clocks coming from PLLs inside the hdmiphy blocks. These can be used for better rates, but the system will also work without them. The problem around that is described in the followups to[1]. As we already know the of node of the presumed clock provider, add a check via of_device_is_available() whether this is a "valid" device node. This prevents eternal defer loops. Link: https://lore.kernel.org/dri-devel/20250215-vop2-hdmi1-disp-modes-v1-3-81962a7151d6@collabora.com/ [1] Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250222223733.2990179-1-heiko@sntech.de [sboyd@kernel.org: Reword commit text a bit] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-02-22 23:37:33 +01:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clkdev: Always allocate a struct clk and call __clk_get() w/ CCF of_clk_get_by_clkspec() returns a struct clk pointer but it doesn't create a new handle for the consumers when we're using the common clock framework. Instead it just returns whatever the clk provider hands out. When the consumers go to call clk_put() we get an Oops. Unable to handle kernel paging request at virtual address 00200200 pgd = c0004000 [00200200] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc1-00104-ga251361a-dirty #992 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: ee00b000 ti: ee088000 task.ti: ee088000 PC is at __clk_put+0x24/0xd0 LR is at clk_prepare_lock+0xc/0xec pc : [<c03eef38>] lr : [<c03ec1f4>] psr: 20000153 sp : ee089de8 ip : 00000000 fp : 00000000 r10: ee02f480 r9 : 00000001 r8 : 00000000 r7 : ee031cc0 r6 : ee089e08 r5 : 00000000 r4 : ee02f480 r3 : 00100100 r2 : 00200200 r1 : 0000091e r0 : 00000001 Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee088238) Stack: (0xee089de8 to 0xee08a000) 9de0: ee7c8f14 c03f0ec8 ee089e08 00000000 c0718dc8 00000001 9e00: 00000000 c04ee0f0 ee7e0844 00000001 00000181 c04edb58 ee2bd320 00000000 9e20: 00000000 c011dc5c ee16a1e0 00000000 00000000 c0718dc8 ee16a1e0 ee2bd1e0 9e40: c0641740 ee16a1e0 00000000 ee2bd320 c0718dc8 ee1d3e10 ee1d3e10 00000000 9e60: c0769a88 00000000 c0718dc8 00000000 00000000 c02c3124 c02c310c ee1d3e10 9e80: c07b4eec 00000000 c0769a88 c02c1d0c ee1d3e10 c0769a88 ee1d3e44 00000000 9ea0: c07091dc c02c1eb8 00000000 c0769a88 c02c1e2c c02c0544 ee005478 ee1676c0 9ec0: c0769a88 ee3a4e80 c0760ce8 c02c150c c0669b90 c0769a88 c0746cd8 c0769a88 9ee0: c0746cd8 ee2bc4c0 c0778c00 c02c24e0 00000000 c0746cd8 c0746cd8 c07091f0 9f00: 00000000 c0008944 c04f405c 00000025 ee00b000 60000153 c074ab00 00000000 9f20: 00000000 c074ab90 60000153 00000000 ef7fca5d c050860c 000000b6 c0036b88 9f40: c065ecc4 c06bc728 00000006 00000006 c074ab30 ef7fca40 c0739bdc 00000006 9f60: c0718dbc c0778c00 000000b6 c0718dc8 c06ed598 c06edd64 00000006 00000006 9f80: c06ed598 c003b438 00000000 c04e64f4 00000000 00000000 00000000 00000000 9fa0: 00000000 c04e64fc 00000000 c000e838 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0c0c0c0 c0c0c0c0 [<c03eef38>] (__clk_put) from [<c03f0ec8>] (of_clk_set_defaults+0xe0/0x2c0) [<c03f0ec8>] (of_clk_set_defaults) from [<c02c3124>] (platform_drv_probe+0x18/0xa4) [<c02c3124>] (platform_drv_probe) from [<c02c1d0c>] (driver_probe_device+0x10c/0x22c) [<c02c1d0c>] (driver_probe_device) from [<c02c1eb8>] (__driver_attach+0x8c/0x90) [<c02c1eb8>] (__driver_attach) from [<c02c0544>] (bus_for_each_dev+0x54/0x88) [<c02c0544>] (bus_for_each_dev) from [<c02c150c>] (bus_add_driver+0xd4/0x1d0) [<c02c150c>] (bus_add_driver) from [<c02c24e0>] (driver_register+0x78/0xf4) [<c02c24e0>] (driver_register) from [<c07091f0>] (fimc_md_init+0x14/0x30) [<c07091f0>] (fimc_md_init) from [<c0008944>] (do_one_initcall+0x80/0x1d0) [<c0008944>] (do_one_initcall) from [<c06edd64>] (kernel_init_freeable+0x108/0x1d4) [<c06edd64>] (kernel_init_freeable) from [<c04e64fc>] (kernel_init+0x8/0xec) [<c04e64fc>] (kernel_init) from [<c000e838>] (ret_from_fork+0x14/0x3c) Code: ebfff4ae e5943014 e5942018 e3530000 (e5823000) Let's create a per-user handle here so that clk_put() can properly unlink it and free the handle. Now that we allocate a clk structure here we need to free it if __clk_get() fails so bury the __clk_get() call in __of_clk_get_from_provider(). We need to handle the same problem in clk_get_sys() so export __clk_free_clk() to clkdev.c and do the same thing, except let's use a union to make this code #ifdef free. This fixes the above crash, properly calls __clk_get() when of_clk_get_from_provider() is called, and cleans up the clk structure on the error path of clk_get_sys(). Fixes: 035a61c314eb "clk: Make clk API return per-user struct clk instances" Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reported-by: Alban Browaeys <alban.browaeys@gmail.com> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Alban Browaeys <prahal@yahoo.com> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-06 11:42:43 -08:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
of: remove internal arguments from of_property_for_each_u32() The of_property_for_each_u32() macro needs five parameters, two of which are primarily meant as internal variables for the macro itself (in the for() clause). Yet these two parameters are used by a few drivers, and this can be considered misuse or at least bad practice. Now that the kernel uses C11 to build, these two parameters can be avoided by declaring them internally, thus changing this pattern: struct property *prop; const __be32 *p; u32 val; of_property_for_each_u32(np, "xyz", prop, p, val) { ... } to this: u32 val; of_property_for_each_u32(np, "xyz", val) { ... } However two variables cannot be declared in the for clause even with C11, so declare one struct that contain the two variables we actually need. As the variables inside this struct are not meant to be used by users of this macro, give the struct instance the noticeable name "_it" so it is visible during code reviews, helping to avoid new code to use it directly. Most usages are trivially converted as they do not use those two parameters, as expected. The non-trivial cases are: - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the checks had to be replicated in a different way, making code more verbose and somewhat uglier, but I refrained from a full rework to keep as much of the original code untouched having no hardware to test my changes All the changes have been build tested. The few for which I have the hardware have been runtime-tested too. Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-07-24 18:33:06 +02:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
of: remove internal arguments from of_property_for_each_u32() The of_property_for_each_u32() macro needs five parameters, two of which are primarily meant as internal variables for the macro itself (in the for() clause). Yet these two parameters are used by a few drivers, and this can be considered misuse or at least bad practice. Now that the kernel uses C11 to build, these two parameters can be avoided by declaring them internally, thus changing this pattern: struct property *prop; const __be32 *p; u32 val; of_property_for_each_u32(np, "xyz", prop, p, val) { ... } to this: u32 val; of_property_for_each_u32(np, "xyz", val) { ... } However two variables cannot be declared in the for clause even with C11, so declare one struct that contain the two variables we actually need. As the variables inside this struct are not meant to be used by users of this macro, give the struct instance the noticeable name "_it" so it is visible during code reviews, helping to avoid new code to use it directly. Most usages are trivially converted as they do not use those two parameters, as expected. The non-trivial cases are: - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the checks had to be replicated in a different way, making code more verbose and somewhat uglier, but I refrained from a full rework to keep as much of the original code untouched having no hardware to test my changes All the changes have been build tested. The few for which I have the hardware have been runtime-tested too. Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-07-24 18:33:06 +02:00
of: remove internal arguments from of_property_for_each_u32() The of_property_for_each_u32() macro needs five parameters, two of which are primarily meant as internal variables for the macro itself (in the for() clause). Yet these two parameters are used by a few drivers, and this can be considered misuse or at least bad practice. Now that the kernel uses C11 to build, these two parameters can be avoided by declaring them internally, thus changing this pattern: struct property *prop; const __be32 *p; u32 val; of_property_for_each_u32(np, "xyz", prop, p, val) { ... } to this: u32 val; of_property_for_each_u32(np, "xyz", val) { ... } However two variables cannot be declared in the for clause even with C11, so declare one struct that contain the two variables we actually need. As the variables inside this struct are not meant to be used by users of this macro, give the struct instance the noticeable name "_it" so it is visible during code reviews, helping to avoid new code to use it directly. Most usages are trivially converted as they do not use those two parameters, as expected. The non-trivial cases are: - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the checks had to be replicated in a different way, making code more verbose and somewhat uglier, but I refrained from a full rework to keep as much of the original code untouched having no hardware to test my changes All the changes have been build tested. The few for which I have the hardware have been runtime-tested too. Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-07-24 18:33:06 +02:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
of: remove internal arguments from of_property_for_each_u32() The of_property_for_each_u32() macro needs five parameters, two of which are primarily meant as internal variables for the macro itself (in the for() clause). Yet these two parameters are used by a few drivers, and this can be considered misuse or at least bad practice. Now that the kernel uses C11 to build, these two parameters can be avoided by declaring them internally, thus changing this pattern: struct property *prop; const __be32 *p; u32 val; of_property_for_each_u32(np, "xyz", prop, p, val) { ... } to this: u32 val; of_property_for_each_u32(np, "xyz", val) { ... } However two variables cannot be declared in the for clause even with C11, so declare one struct that contain the two variables we actually need. As the variables inside this struct are not meant to be used by users of this macro, give the struct instance the noticeable name "_it" so it is visible during code reviews, helping to avoid new code to use it directly. Most usages are trivially converted as they do not use those two parameters, as expected. The non-trivial cases are: - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the checks had to be replicated in a different way, making code more verbose and somewhat uglier, but I refrained from a full rework to keep as much of the original code untouched having no hardware to test my changes All the changes have been build tested. The few for which I have the hardware have been runtime-tested too. Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-07-24 18:33:06 +02:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-09 14:50:06 -05:00