linux/drivers/of/unittest.c

4537 lines
129 KiB

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 15:09:49 -07:00
2019-09-20 13:28:53 -05:00
of: unittest: update text of expected warnings The text of various warning messages triggered by unittest has changed. Update the text of expected warnings to match. The expected vs actual warnings are most easily seen by filtering the boot console messages with the of_unittest_expect program at https://github.com/frowand/dt_tools.git. The filter prefixes problem lines with '***', and prefixes lines that match expected errors with 'ok '. All other lines are prefixed with ' '. Unrelated lines have been deleted in the following examples. The mismatch appears as: -> ### dt-test ### start of unittest - you will see error messages OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1 platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found ** of_unittest_expect WARNING - not found ---> platform testcase-data:testcase-device2: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 42 ** EXPECT not found : 4 With this commit applied, the mismatch is resolved: -> ### dt-test ### start of unittest - you will see error messages ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ok platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 46 ** EXPECT not found : 0 Fixes: 2043727c2882 ("driver core: platform: Make use of the helper function dev_err_probe()") Fixes: 94a4950a4acf ("of: base: Fix phandle argument length mismatch error message") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220127192643.2534941-1-frowand.list@gmail.com
2022-01-27 13:26:43 -06:00
of: unittest: update text of expected warnings The text of various warning messages triggered by unittest has changed. Update the text of expected warnings to match. The expected vs actual warnings are most easily seen by filtering the boot console messages with the of_unittest_expect program at https://github.com/frowand/dt_tools.git. The filter prefixes problem lines with '***', and prefixes lines that match expected errors with 'ok '. All other lines are prefixed with ' '. Unrelated lines have been deleted in the following examples. The mismatch appears as: -> ### dt-test ### start of unittest - you will see error messages OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1 platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found ** of_unittest_expect WARNING - not found ---> platform testcase-data:testcase-device2: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 42 ** EXPECT not found : 4 With this commit applied, the mismatch is resolved: -> ### dt-test ### start of unittest - you will see error messages ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ok platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 46 ** EXPECT not found : 0 Fixes: 2043727c2882 ("driver core: platform: Make use of the helper function dev_err_probe()") Fixes: 94a4950a4acf ("of: base: Fix phandle argument length mismatch error message") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220127192643.2534941-1-frowand.list@gmail.com
2022-01-27 13:26:43 -06:00
of: unittest: update text of expected warnings The text of various warning messages triggered by unittest has changed. Update the text of expected warnings to match. The expected vs actual warnings are most easily seen by filtering the boot console messages with the of_unittest_expect program at https://github.com/frowand/dt_tools.git. The filter prefixes problem lines with '***', and prefixes lines that match expected errors with 'ok '. All other lines are prefixed with ' '. Unrelated lines have been deleted in the following examples. The mismatch appears as: -> ### dt-test ### start of unittest - you will see error messages OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1 platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found ** of_unittest_expect WARNING - not found ---> platform testcase-data:testcase-device2: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 42 ** EXPECT not found : 4 With this commit applied, the mismatch is resolved: -> ### dt-test ### start of unittest - you will see error messages ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ok platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 46 ** EXPECT not found : 0 Fixes: 2043727c2882 ("driver core: platform: Make use of the helper function dev_err_probe()") Fixes: 94a4950a4acf ("of: base: Fix phandle argument length mismatch error message") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220127192643.2534941-1-frowand.list@gmail.com
2022-01-27 13:26:43 -06:00
of: unittest: update text of expected warnings The text of various warning messages triggered by unittest has changed. Update the text of expected warnings to match. The expected vs actual warnings are most easily seen by filtering the boot console messages with the of_unittest_expect program at https://github.com/frowand/dt_tools.git. The filter prefixes problem lines with '***', and prefixes lines that match expected errors with 'ok '. All other lines are prefixed with ' '. Unrelated lines have been deleted in the following examples. The mismatch appears as: -> ### dt-test ### start of unittest - you will see error messages OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1 platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found ** of_unittest_expect WARNING - not found ---> platform testcase-data:testcase-device2: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 42 ** EXPECT not found : 4 With this commit applied, the mismatch is resolved: -> ### dt-test ### start of unittest - you will see error messages ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ok platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 46 ** EXPECT not found : 0 Fixes: 2043727c2882 ("driver core: platform: Make use of the helper function dev_err_probe()") Fixes: 94a4950a4acf ("of: base: Fix phandle argument length mismatch error message") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220127192643.2534941-1-frowand.list@gmail.com
2022-01-27 13:26:43 -06:00
of: unittest: update text of expected warnings The text of various warning messages triggered by unittest has changed. Update the text of expected warnings to match. The expected vs actual warnings are most easily seen by filtering the boot console messages with the of_unittest_expect program at https://github.com/frowand/dt_tools.git. The filter prefixes problem lines with '***', and prefixes lines that match expected errors with 'ok '. All other lines are prefixed with ' '. Unrelated lines have been deleted in the following examples. The mismatch appears as: -> ### dt-test ### start of unittest - you will see error messages OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1 platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found ** of_unittest_expect WARNING - not found ---> platform testcase-data:testcase-device2: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 42 ** EXPECT not found : 4 With this commit applied, the mismatch is resolved: -> ### dt-test ### start of unittest - you will see error messages ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ok platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 46 ** EXPECT not found : 0 Fixes: 2043727c2882 ("driver core: platform: Make use of the helper function dev_err_probe()") Fixes: 94a4950a4acf ("of: base: Fix phandle argument length mismatch error message") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220127192643.2534941-1-frowand.list@gmail.com
2022-01-27 13:26:43 -06:00
of: unittest: update text of expected warnings The text of various warning messages triggered by unittest has changed. Update the text of expected warnings to match. The expected vs actual warnings are most easily seen by filtering the boot console messages with the of_unittest_expect program at https://github.com/frowand/dt_tools.git. The filter prefixes problem lines with '***', and prefixes lines that match expected errors with 'ok '. All other lines are prefixed with ' '. Unrelated lines have been deleted in the following examples. The mismatch appears as: -> ### dt-test ### start of unittest - you will see error messages OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1 platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found ** of_unittest_expect WARNING - not found ---> platform testcase-data:testcase-device2: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 42 ** EXPECT not found : 4 With this commit applied, the mismatch is resolved: -> ### dt-test ### start of unittest - you will see error messages ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ok platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 46 ** EXPECT not found : 0 Fixes: 2043727c2882 ("driver core: platform: Make use of the helper function dev_err_probe()") Fixes: 94a4950a4acf ("of: base: Fix phandle argument length mismatch error message") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220127192643.2534941-1-frowand.list@gmail.com
2022-01-27 13:26:43 -06:00
2019-09-20 13:28:53 -05:00
2019-09-20 13:28:53 -05:00
2019-09-20 13:28:53 -05:00
2019-09-20 13:28:53 -05:00
2019-09-20 13:28:53 -05:00
2019-09-20 13:28:53 -05:00
2019-09-20 13:28:53 -05:00
2019-09-20 13:28:53 -05:00
2019-09-20 13:28:53 -05:00
2019-09-20 13:28:53 -05:00
2019-09-20 13:28:53 -05:00
2019-09-20 13:28:53 -05:00
of: unittest: Disable interrupt node tests for old world MAC systems On systems with OF_IMAP_OLDWORLD_MAC set in of_irq_workarounds, the devicetree interrupt parsing code is different, causing unit tests of devicetree interrupt nodes to fail. Due to a bug in unittest code, which tries to dereference an uninitialized pointer, this results in a crash. OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property Unable to handle kernel paging request for data at address 0x00bc616e Faulting instruction address: 0xc08e9468 Oops: Kernel access of bad area, sig: 11 [#1] BE PREEMPT PowerMac Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.72-rc1-yocto-standard+ #1 task: cf8e0000 task.stack: cf8da000 NIP: c08e9468 LR: c08ea5bc CTR: c08ea5ac REGS: cf8dbb50 TRAP: 0300 Not tainted (4.14.72-rc1-yocto-standard+) MSR: 00001032 <ME,IR,DR,RI> CR: 82004044 XER: 00000000 DAR: 00bc616e DSISR: 40000000 GPR00: c08ea5bc cf8dbc00 cf8e0000 c13ca517 c13ca517 c13ca8a0 00000066 00000002 GPR08: 00000063 00bc614e c0b05865 000affff 82004048 00000000 c00047f0 00000000 GPR16: c0a80000 c0a9cc34 c13ca517 c0ad1134 05ffffff 000affff c0b05860 c0abeef8 GPR24: cecec278 cecec278 c0a8c4d0 c0a885e0 c13ca8a0 05ffffff c13ca8a0 c13ca517 NIP [c08e9468] device_node_gen_full_name+0x30/0x15c LR [c08ea5bc] device_node_string+0x190/0x3c8 Call Trace: [cf8dbc00] [c007f670] trace_hardirqs_on_caller+0x118/0x1fc (unreliable) [cf8dbc40] [c08ea5bc] device_node_string+0x190/0x3c8 [cf8dbcb0] [c08eb794] pointer+0x25c/0x4d0 [cf8dbd00] [c08ebcbc] vsnprintf+0x2b4/0x5ec [cf8dbd60] [c08ec00c] vscnprintf+0x18/0x48 [cf8dbd70] [c008e268] vprintk_store+0x4c/0x22c [cf8dbda0] [c008ecac] vprintk_emit+0x94/0x130 [cf8dbdd0] [c008ff54] printk+0x5c/0x6c [cf8dbe10] [c0b8ddd4] of_unittest+0x2220/0x26f8 [cf8dbea0] [c0004434] do_one_initcall+0x4c/0x184 [cf8dbf00] [c0b4534c] kernel_init_freeable+0x13c/0x1d8 [cf8dbf30] [c0004814] kernel_init+0x24/0x118 [cf8dbf40] [c0013398] ret_from_kernel_thread+0x5c/0x64 The problem was observed when running a qemu test for the g3beige machine with devicetree unittests enabled. Disable interrupt node tests on affected systems to avoid both false unittest failures and the crash. With this patch in place, unittest on the affected system passes with the following message. dt-test ### end of unittest - 144 passed, 0 failed Fixes: 53a42093d96ef ("of: Add device tree selftests") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-25 21:06:24 -07:00
of: unittest: Disable interrupt node tests for old world MAC systems On systems with OF_IMAP_OLDWORLD_MAC set in of_irq_workarounds, the devicetree interrupt parsing code is different, causing unit tests of devicetree interrupt nodes to fail. Due to a bug in unittest code, which tries to dereference an uninitialized pointer, this results in a crash. OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property Unable to handle kernel paging request for data at address 0x00bc616e Faulting instruction address: 0xc08e9468 Oops: Kernel access of bad area, sig: 11 [#1] BE PREEMPT PowerMac Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.72-rc1-yocto-standard+ #1 task: cf8e0000 task.stack: cf8da000 NIP: c08e9468 LR: c08ea5bc CTR: c08ea5ac REGS: cf8dbb50 TRAP: 0300 Not tainted (4.14.72-rc1-yocto-standard+) MSR: 00001032 <ME,IR,DR,RI> CR: 82004044 XER: 00000000 DAR: 00bc616e DSISR: 40000000 GPR00: c08ea5bc cf8dbc00 cf8e0000 c13ca517 c13ca517 c13ca8a0 00000066 00000002 GPR08: 00000063 00bc614e c0b05865 000affff 82004048 00000000 c00047f0 00000000 GPR16: c0a80000 c0a9cc34 c13ca517 c0ad1134 05ffffff 000affff c0b05860 c0abeef8 GPR24: cecec278 cecec278 c0a8c4d0 c0a885e0 c13ca8a0 05ffffff c13ca8a0 c13ca517 NIP [c08e9468] device_node_gen_full_name+0x30/0x15c LR [c08ea5bc] device_node_string+0x190/0x3c8 Call Trace: [cf8dbc00] [c007f670] trace_hardirqs_on_caller+0x118/0x1fc (unreliable) [cf8dbc40] [c08ea5bc] device_node_string+0x190/0x3c8 [cf8dbcb0] [c08eb794] pointer+0x25c/0x4d0 [cf8dbd00] [c08ebcbc] vsnprintf+0x2b4/0x5ec [cf8dbd60] [c08ec00c] vscnprintf+0x18/0x48 [cf8dbd70] [c008e268] vprintk_store+0x4c/0x22c [cf8dbda0] [c008ecac] vprintk_emit+0x94/0x130 [cf8dbdd0] [c008ff54] printk+0x5c/0x6c [cf8dbe10] [c0b8ddd4] of_unittest+0x2220/0x26f8 [cf8dbea0] [c0004434] do_one_initcall+0x4c/0x184 [cf8dbf00] [c0b4534c] kernel_init_freeable+0x13c/0x1d8 [cf8dbf30] [c0004814] kernel_init+0x24/0x118 [cf8dbf40] [c0013398] ret_from_kernel_thread+0x5c/0x64 The problem was observed when running a qemu test for the g3beige machine with devicetree unittests enabled. Disable interrupt node tests on affected systems to avoid both false unittest failures and the crash. With this patch in place, unittest on the affected system passes with the following message. dt-test ### end of unittest - 144 passed, 0 failed Fixes: 53a42093d96ef ("of: Add device tree selftests") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-25 21:06:24 -07:00
of: unittest: Disable interrupt node tests for old world MAC systems On systems with OF_IMAP_OLDWORLD_MAC set in of_irq_workarounds, the devicetree interrupt parsing code is different, causing unit tests of devicetree interrupt nodes to fail. Due to a bug in unittest code, which tries to dereference an uninitialized pointer, this results in a crash. OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property Unable to handle kernel paging request for data at address 0x00bc616e Faulting instruction address: 0xc08e9468 Oops: Kernel access of bad area, sig: 11 [#1] BE PREEMPT PowerMac Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.72-rc1-yocto-standard+ #1 task: cf8e0000 task.stack: cf8da000 NIP: c08e9468 LR: c08ea5bc CTR: c08ea5ac REGS: cf8dbb50 TRAP: 0300 Not tainted (4.14.72-rc1-yocto-standard+) MSR: 00001032 <ME,IR,DR,RI> CR: 82004044 XER: 00000000 DAR: 00bc616e DSISR: 40000000 GPR00: c08ea5bc cf8dbc00 cf8e0000 c13ca517 c13ca517 c13ca8a0 00000066 00000002 GPR08: 00000063 00bc614e c0b05865 000affff 82004048 00000000 c00047f0 00000000 GPR16: c0a80000 c0a9cc34 c13ca517 c0ad1134 05ffffff 000affff c0b05860 c0abeef8 GPR24: cecec278 cecec278 c0a8c4d0 c0a885e0 c13ca8a0 05ffffff c13ca8a0 c13ca517 NIP [c08e9468] device_node_gen_full_name+0x30/0x15c LR [c08ea5bc] device_node_string+0x190/0x3c8 Call Trace: [cf8dbc00] [c007f670] trace_hardirqs_on_caller+0x118/0x1fc (unreliable) [cf8dbc40] [c08ea5bc] device_node_string+0x190/0x3c8 [cf8dbcb0] [c08eb794] pointer+0x25c/0x4d0 [cf8dbd00] [c08ebcbc] vsnprintf+0x2b4/0x5ec [cf8dbd60] [c08ec00c] vscnprintf+0x18/0x48 [cf8dbd70] [c008e268] vprintk_store+0x4c/0x22c [cf8dbda0] [c008ecac] vprintk_emit+0x94/0x130 [cf8dbdd0] [c008ff54] printk+0x5c/0x6c [cf8dbe10] [c0b8ddd4] of_unittest+0x2220/0x26f8 [cf8dbea0] [c0004434] do_one_initcall+0x4c/0x184 [cf8dbf00] [c0b4534c] kernel_init_freeable+0x13c/0x1d8 [cf8dbf30] [c0004814] kernel_init+0x24/0x118 [cf8dbf40] [c0013398] ret_from_kernel_thread+0x5c/0x64 The problem was observed when running a qemu test for the g3beige machine with devicetree unittests enabled. Disable interrupt node tests on affected systems to avoid both false unittest failures and the crash. With this patch in place, unittest on the affected system passes with the following message. dt-test ### end of unittest - 144 passed, 0 failed Fixes: 53a42093d96ef ("of: Add device tree selftests") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-25 21:06:24 -07:00
of: unittest: Disable interrupt node tests for old world MAC systems On systems with OF_IMAP_OLDWORLD_MAC set in of_irq_workarounds, the devicetree interrupt parsing code is different, causing unit tests of devicetree interrupt nodes to fail. Due to a bug in unittest code, which tries to dereference an uninitialized pointer, this results in a crash. OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property Unable to handle kernel paging request for data at address 0x00bc616e Faulting instruction address: 0xc08e9468 Oops: Kernel access of bad area, sig: 11 [#1] BE PREEMPT PowerMac Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.72-rc1-yocto-standard+ #1 task: cf8e0000 task.stack: cf8da000 NIP: c08e9468 LR: c08ea5bc CTR: c08ea5ac REGS: cf8dbb50 TRAP: 0300 Not tainted (4.14.72-rc1-yocto-standard+) MSR: 00001032 <ME,IR,DR,RI> CR: 82004044 XER: 00000000 DAR: 00bc616e DSISR: 40000000 GPR00: c08ea5bc cf8dbc00 cf8e0000 c13ca517 c13ca517 c13ca8a0 00000066 00000002 GPR08: 00000063 00bc614e c0b05865 000affff 82004048 00000000 c00047f0 00000000 GPR16: c0a80000 c0a9cc34 c13ca517 c0ad1134 05ffffff 000affff c0b05860 c0abeef8 GPR24: cecec278 cecec278 c0a8c4d0 c0a885e0 c13ca8a0 05ffffff c13ca8a0 c13ca517 NIP [c08e9468] device_node_gen_full_name+0x30/0x15c LR [c08ea5bc] device_node_string+0x190/0x3c8 Call Trace: [cf8dbc00] [c007f670] trace_hardirqs_on_caller+0x118/0x1fc (unreliable) [cf8dbc40] [c08ea5bc] device_node_string+0x190/0x3c8 [cf8dbcb0] [c08eb794] pointer+0x25c/0x4d0 [cf8dbd00] [c08ebcbc] vsnprintf+0x2b4/0x5ec [cf8dbd60] [c08ec00c] vscnprintf+0x18/0x48 [cf8dbd70] [c008e268] vprintk_store+0x4c/0x22c [cf8dbda0] [c008ecac] vprintk_emit+0x94/0x130 [cf8dbdd0] [c008ff54] printk+0x5c/0x6c [cf8dbe10] [c0b8ddd4] of_unittest+0x2220/0x26f8 [cf8dbea0] [c0004434] do_one_initcall+0x4c/0x184 [cf8dbf00] [c0b4534c] kernel_init_freeable+0x13c/0x1d8 [cf8dbf30] [c0004814] kernel_init+0x24/0x118 [cf8dbf40] [c0013398] ret_from_kernel_thread+0x5c/0x64 The problem was observed when running a qemu test for the g3beige machine with devicetree unittests enabled. Disable interrupt node tests on affected systems to avoid both false unittest failures and the crash. With this patch in place, unittest on the affected system passes with the following message. dt-test ### end of unittest - 144 passed, 0 failed Fixes: 53a42093d96ef ("of: Add device tree selftests") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-25 21:06:24 -07:00
of: unittest: update text of expected warnings The text of various warning messages triggered by unittest has changed. Update the text of expected warnings to match. The expected vs actual warnings are most easily seen by filtering the boot console messages with the of_unittest_expect program at https://github.com/frowand/dt_tools.git. The filter prefixes problem lines with '***', and prefixes lines that match expected errors with 'ok '. All other lines are prefixed with ' '. Unrelated lines have been deleted in the following examples. The mismatch appears as: -> ### dt-test ### start of unittest - you will see error messages OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1 platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found ** of_unittest_expect WARNING - not found ---> platform testcase-data:testcase-device2: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 42 ** EXPECT not found : 4 With this commit applied, the mismatch is resolved: -> ### dt-test ### start of unittest - you will see error messages ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ok platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 46 ** EXPECT not found : 0 Fixes: 2043727c2882 ("driver core: platform: Make use of the helper function dev_err_probe()") Fixes: 94a4950a4acf ("of: base: Fix phandle argument length mismatch error message") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220127192643.2534941-1-frowand.list@gmail.com
2022-01-27 13:26:43 -06:00
of: unittest: Disable interrupt node tests for old world MAC systems On systems with OF_IMAP_OLDWORLD_MAC set in of_irq_workarounds, the devicetree interrupt parsing code is different, causing unit tests of devicetree interrupt nodes to fail. Due to a bug in unittest code, which tries to dereference an uninitialized pointer, this results in a crash. OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property Unable to handle kernel paging request for data at address 0x00bc616e Faulting instruction address: 0xc08e9468 Oops: Kernel access of bad area, sig: 11 [#1] BE PREEMPT PowerMac Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.72-rc1-yocto-standard+ #1 task: cf8e0000 task.stack: cf8da000 NIP: c08e9468 LR: c08ea5bc CTR: c08ea5ac REGS: cf8dbb50 TRAP: 0300 Not tainted (4.14.72-rc1-yocto-standard+) MSR: 00001032 <ME,IR,DR,RI> CR: 82004044 XER: 00000000 DAR: 00bc616e DSISR: 40000000 GPR00: c08ea5bc cf8dbc00 cf8e0000 c13ca517 c13ca517 c13ca8a0 00000066 00000002 GPR08: 00000063 00bc614e c0b05865 000affff 82004048 00000000 c00047f0 00000000 GPR16: c0a80000 c0a9cc34 c13ca517 c0ad1134 05ffffff 000affff c0b05860 c0abeef8 GPR24: cecec278 cecec278 c0a8c4d0 c0a885e0 c13ca8a0 05ffffff c13ca8a0 c13ca517 NIP [c08e9468] device_node_gen_full_name+0x30/0x15c LR [c08ea5bc] device_node_string+0x190/0x3c8 Call Trace: [cf8dbc00] [c007f670] trace_hardirqs_on_caller+0x118/0x1fc (unreliable) [cf8dbc40] [c08ea5bc] device_node_string+0x190/0x3c8 [cf8dbcb0] [c08eb794] pointer+0x25c/0x4d0 [cf8dbd00] [c08ebcbc] vsnprintf+0x2b4/0x5ec [cf8dbd60] [c08ec00c] vscnprintf+0x18/0x48 [cf8dbd70] [c008e268] vprintk_store+0x4c/0x22c [cf8dbda0] [c008ecac] vprintk_emit+0x94/0x130 [cf8dbdd0] [c008ff54] printk+0x5c/0x6c [cf8dbe10] [c0b8ddd4] of_unittest+0x2220/0x26f8 [cf8dbea0] [c0004434] do_one_initcall+0x4c/0x184 [cf8dbf00] [c0b4534c] kernel_init_freeable+0x13c/0x1d8 [cf8dbf30] [c0004814] kernel_init+0x24/0x118 [cf8dbf40] [c0013398] ret_from_kernel_thread+0x5c/0x64 The problem was observed when running a qemu test for the g3beige machine with devicetree unittests enabled. Disable interrupt node tests on affected systems to avoid both false unittest failures and the crash. With this patch in place, unittest on the affected system passes with the following message. dt-test ### end of unittest - 144 passed, 0 failed Fixes: 53a42093d96ef ("of: Add device tree selftests") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-25 21:06:24 -07:00
of: unittest: update text of expected warnings The text of various warning messages triggered by unittest has changed. Update the text of expected warnings to match. The expected vs actual warnings are most easily seen by filtering the boot console messages with the of_unittest_expect program at https://github.com/frowand/dt_tools.git. The filter prefixes problem lines with '***', and prefixes lines that match expected errors with 'ok '. All other lines are prefixed with ' '. Unrelated lines have been deleted in the following examples. The mismatch appears as: -> ### dt-test ### start of unittest - you will see error messages OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1 platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found ** of_unittest_expect WARNING - not found ---> platform testcase-data:testcase-device2: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 42 ** EXPECT not found : 4 With this commit applied, the mismatch is resolved: -> ### dt-test ### start of unittest - you will see error messages ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ok platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 46 ** EXPECT not found : 0 Fixes: 2043727c2882 ("driver core: platform: Make use of the helper function dev_err_probe()") Fixes: 94a4950a4acf ("of: base: Fix phandle argument length mismatch error message") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220127192643.2534941-1-frowand.list@gmail.com
2022-01-27 13:26:43 -06:00
of: unittest: Disable interrupt node tests for old world MAC systems On systems with OF_IMAP_OLDWORLD_MAC set in of_irq_workarounds, the devicetree interrupt parsing code is different, causing unit tests of devicetree interrupt nodes to fail. Due to a bug in unittest code, which tries to dereference an uninitialized pointer, this results in a crash. OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property Unable to handle kernel paging request for data at address 0x00bc616e Faulting instruction address: 0xc08e9468 Oops: Kernel access of bad area, sig: 11 [#1] BE PREEMPT PowerMac Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.72-rc1-yocto-standard+ #1 task: cf8e0000 task.stack: cf8da000 NIP: c08e9468 LR: c08ea5bc CTR: c08ea5ac REGS: cf8dbb50 TRAP: 0300 Not tainted (4.14.72-rc1-yocto-standard+) MSR: 00001032 <ME,IR,DR,RI> CR: 82004044 XER: 00000000 DAR: 00bc616e DSISR: 40000000 GPR00: c08ea5bc cf8dbc00 cf8e0000 c13ca517 c13ca517 c13ca8a0 00000066 00000002 GPR08: 00000063 00bc614e c0b05865 000affff 82004048 00000000 c00047f0 00000000 GPR16: c0a80000 c0a9cc34 c13ca517 c0ad1134 05ffffff 000affff c0b05860 c0abeef8 GPR24: cecec278 cecec278 c0a8c4d0 c0a885e0 c13ca8a0 05ffffff c13ca8a0 c13ca517 NIP [c08e9468] device_node_gen_full_name+0x30/0x15c LR [c08ea5bc] device_node_string+0x190/0x3c8 Call Trace: [cf8dbc00] [c007f670] trace_hardirqs_on_caller+0x118/0x1fc (unreliable) [cf8dbc40] [c08ea5bc] device_node_string+0x190/0x3c8 [cf8dbcb0] [c08eb794] pointer+0x25c/0x4d0 [cf8dbd00] [c08ebcbc] vsnprintf+0x2b4/0x5ec [cf8dbd60] [c08ec00c] vscnprintf+0x18/0x48 [cf8dbd70] [c008e268] vprintk_store+0x4c/0x22c [cf8dbda0] [c008ecac] vprintk_emit+0x94/0x130 [cf8dbdd0] [c008ff54] printk+0x5c/0x6c [cf8dbe10] [c0b8ddd4] of_unittest+0x2220/0x26f8 [cf8dbea0] [c0004434] do_one_initcall+0x4c/0x184 [cf8dbf00] [c0b4534c] kernel_init_freeable+0x13c/0x1d8 [cf8dbf30] [c0004814] kernel_init+0x24/0x118 [cf8dbf40] [c0013398] ret_from_kernel_thread+0x5c/0x64 The problem was observed when running a qemu test for the g3beige machine with devicetree unittests enabled. Disable interrupt node tests on affected systems to avoid both false unittest failures and the crash. With this patch in place, unittest on the affected system passes with the following message. dt-test ### end of unittest - 144 passed, 0 failed Fixes: 53a42093d96ef ("of: Add device tree selftests") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-25 21:06:24 -07:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 10:02:30 +02:00
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 10:02:30 +02:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
of: change overlay apply input data from unflattened to FDT Move duplicating and unflattening of an overlay flattened devicetree (FDT) into the overlay application code. To accomplish this, of_overlay_apply() is replaced by of_overlay_fdt_apply(). The copy of the FDT (aka "duplicate FDT") now belongs to devicetree code, which is thus responsible for freeing the duplicate FDT. The caller of of_overlay_fdt_apply() remains responsible for freeing the original FDT. The unflattened devicetree now belongs to devicetree code, which is thus responsible for freeing the unflattened devicetree. These ownership changes prevent early freeing of the duplicated FDT or the unflattened devicetree, which could result in use after free errors. of_overlay_fdt_apply() is a private function for the anticipated overlay loader. Update unittest.c to use of_overlay_fdt_apply() instead of of_overlay_apply(). Move overlay fragments from artificial locations in drivers/of/unittest-data/tests-overlay.dtsi into one devicetree source file per overlay. This led to changes in drivers/of/unitest-data/Makefile and drivers/of/unitest.c. - Add overlay directives to the overlay devicetree source files so that dtc will compile them as true overlays into one FDT data chunk per overlay. - Set CFLAGS for drivers/of/unittest-data/testcases.dts so that symbols will be generated for overlay resolution of overlays that are no longer artificially contained in testcases.dts - Unflatten and apply each unittest overlay FDT using of_overlay_fdt_apply(). - Enable the of_resolve_phandles() check for whether the unflattened overlay is detached. This check was previously disabled because the overlays from tests-overlay.dtsi were not unflattened into detached trees. - Other changes to unittest.c infrastructure to manage multiple test FDTs built into the kernel image (access by name instead of arbitrary number). - of_unittest_overlay_high_level(): previously unused code to add properties from the overlay_base devicetree to the live tree was triggered by the restructuring of tests-overlay.dtsi and thus testcases.dts. This exposed two bugs: (1) the need to dup a property before adding it, and (2) property 'name' is auto-generated in the unflatten code and thus will be a duplicate in the __symbols__ node - do not treat this duplicate as an error. Signed-off-by: Frank Rowand <frank.rowand@sony.com>
2018-02-12 00:19:42 -08:00
2019-09-20 13:28:53 -05:00