linux/drivers/pci/doe.c

893 lines
23 KiB

PCI/DOE: Expose DOE features via sysfs PCIe r6.0 added support for Data Object Exchange (DOE). When DOE is supported, the DOE Discovery Feature must be implemented per PCIe r6.1, sec 6.30.1.1. DOE allows a requester to obtain information about the other DOE features supported by the device. The kernel already queries the DOE features supported and caches the values. Expose the values in sysfs to allow user space to determine which DOE features are supported by the PCIe device. By exposing the information to userspace, tools like lspci can relay the information to users. By listing all of the supported features we can allow userspace to parse the list, which might include vendor specific features as well as yet to be supported features. As the DOE Discovery feature must always be supported we treat it as a special named attribute case. This allows the usual PCI attribute_group handling to correctly create the doe_features directory when registering pci_doe_sysfs_group (otherwise it doesn't and sysfs_add_file_to_group() will seg fault). After this patch is supported you can see something like this when attaching a DOE device: $ ls /sys/devices/pci0000:00/0000:00:02.0//doe* 0001:01 0001:02 doe_discovery Link: https://lore.kernel.org/r/20250306075211.1855177-3-alistair@alistair23.me Signed-off-by: Alistair Francis <alistair@alistair23.me> [bhelgaas: drop pci_doe_sysfs_init() stub return, make DEVICE_ATTR_RO(doe_discovery) static] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-06 17:52:10 +10:00
PCI/DOE: Expose DOE features via sysfs PCIe r6.0 added support for Data Object Exchange (DOE). When DOE is supported, the DOE Discovery Feature must be implemented per PCIe r6.1, sec 6.30.1.1. DOE allows a requester to obtain information about the other DOE features supported by the device. The kernel already queries the DOE features supported and caches the values. Expose the values in sysfs to allow user space to determine which DOE features are supported by the PCIe device. By exposing the information to userspace, tools like lspci can relay the information to users. By listing all of the supported features we can allow userspace to parse the list, which might include vendor specific features as well as yet to be supported features. As the DOE Discovery feature must always be supported we treat it as a special named attribute case. This allows the usual PCI attribute_group handling to correctly create the doe_features directory when registering pci_doe_sysfs_group (otherwise it doesn't and sysfs_add_file_to_group() will seg fault). After this patch is supported you can see something like this when attaching a DOE device: $ ls /sys/devices/pci0000:00/0000:00:02.0//doe* 0001:01 0001:02 doe_discovery Link: https://lore.kernel.org/r/20250306075211.1855177-3-alistair@alistair23.me Signed-off-by: Alistair Francis <alistair@alistair23.me> [bhelgaas: drop pci_doe_sysfs_init() stub return, make DEVICE_ATTR_RO(doe_discovery) static] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-06 17:52:10 +10:00
PCI/DOE: Create mailboxes on device enumeration Currently a DOE instance cannot be shared by multiple drivers because each driver creates its own pci_doe_mb struct for a given DOE instance. For the same reason a DOE instance cannot be shared between the PCI core and a driver. Moreover, finding out which protocols a DOE instance supports requires creating a pci_doe_mb for it. If a device has multiple DOE instances, a driver looking for a specific protocol may need to create a pci_doe_mb for each of the device's DOE instances and then destroy those which do not support the desired protocol. That's obviously an inefficient way to do things. Overcome these issues by creating mailboxes in the PCI core on device enumeration. Provide a pci_find_doe_mailbox() API call to allow drivers to get a pci_doe_mb for a given (pci_dev, vendor, protocol) triple. This API is modeled after pci_find_capability() and can later be amended with a pci_find_next_doe_mailbox() call to iterate over all mailboxes of a given pci_dev which support a specific protocol. On removal, destroy the mailboxes in pci_destroy_dev(), after the driver is unbound. This allows drivers to use DOE in their ->remove() hook. On surprise removal, cancel ongoing DOE exchanges and prevent new ones from being scheduled. Thereby ensure that a hot-removed device doesn't needlessly wait for a running exchange to time out. Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ming Li <ming4.li@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/40a6f973f72ef283d79dd55e7e6fddc7481199af.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-03-11 15:40:12 +01:00
PCI/DOE: Expose DOE features via sysfs PCIe r6.0 added support for Data Object Exchange (DOE). When DOE is supported, the DOE Discovery Feature must be implemented per PCIe r6.1, sec 6.30.1.1. DOE allows a requester to obtain information about the other DOE features supported by the device. The kernel already queries the DOE features supported and caches the values. Expose the values in sysfs to allow user space to determine which DOE features are supported by the PCIe device. By exposing the information to userspace, tools like lspci can relay the information to users. By listing all of the supported features we can allow userspace to parse the list, which might include vendor specific features as well as yet to be supported features. As the DOE Discovery feature must always be supported we treat it as a special named attribute case. This allows the usual PCI attribute_group handling to correctly create the doe_features directory when registering pci_doe_sysfs_group (otherwise it doesn't and sysfs_add_file_to_group() will seg fault). After this patch is supported you can see something like this when attaching a DOE device: $ ls /sys/devices/pci0000:00/0000:00:02.0//doe* 0001:01 0001:02 doe_discovery Link: https://lore.kernel.org/r/20250306075211.1855177-3-alistair@alistair23.me Signed-off-by: Alistair Francis <alistair@alistair23.me> [bhelgaas: drop pci_doe_sysfs_init() stub return, make DEVICE_ATTR_RO(doe_discovery) static] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-06 17:52:10 +10:00
PCI/DOE: Expose DOE features via sysfs PCIe r6.0 added support for Data Object Exchange (DOE). When DOE is supported, the DOE Discovery Feature must be implemented per PCIe r6.1, sec 6.30.1.1. DOE allows a requester to obtain information about the other DOE features supported by the device. The kernel already queries the DOE features supported and caches the values. Expose the values in sysfs to allow user space to determine which DOE features are supported by the PCIe device. By exposing the information to userspace, tools like lspci can relay the information to users. By listing all of the supported features we can allow userspace to parse the list, which might include vendor specific features as well as yet to be supported features. As the DOE Discovery feature must always be supported we treat it as a special named attribute case. This allows the usual PCI attribute_group handling to correctly create the doe_features directory when registering pci_doe_sysfs_group (otherwise it doesn't and sysfs_add_file_to_group() will seg fault). After this patch is supported you can see something like this when attaching a DOE device: $ ls /sys/devices/pci0000:00/0000:00:02.0//doe* 0001:01 0001:02 doe_discovery Link: https://lore.kernel.org/r/20250306075211.1855177-3-alistair@alistair23.me Signed-off-by: Alistair Francis <alistair@alistair23.me> [bhelgaas: drop pci_doe_sysfs_init() stub return, make DEVICE_ATTR_RO(doe_discovery) static] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-06 17:52:10 +10:00
PCI/DOE: Expose DOE features via sysfs PCIe r6.0 added support for Data Object Exchange (DOE). When DOE is supported, the DOE Discovery Feature must be implemented per PCIe r6.1, sec 6.30.1.1. DOE allows a requester to obtain information about the other DOE features supported by the device. The kernel already queries the DOE features supported and caches the values. Expose the values in sysfs to allow user space to determine which DOE features are supported by the PCIe device. By exposing the information to userspace, tools like lspci can relay the information to users. By listing all of the supported features we can allow userspace to parse the list, which might include vendor specific features as well as yet to be supported features. As the DOE Discovery feature must always be supported we treat it as a special named attribute case. This allows the usual PCI attribute_group handling to correctly create the doe_features directory when registering pci_doe_sysfs_group (otherwise it doesn't and sysfs_add_file_to_group() will seg fault). After this patch is supported you can see something like this when attaching a DOE device: $ ls /sys/devices/pci0000:00/0000:00:02.0//doe* 0001:01 0001:02 doe_discovery Link: https://lore.kernel.org/r/20250306075211.1855177-3-alistair@alistair23.me Signed-off-by: Alistair Francis <alistair@alistair23.me> [bhelgaas: drop pci_doe_sysfs_init() stub return, make DEVICE_ATTR_RO(doe_discovery) static] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-06 17:52:10 +10:00
PCI/DOE: Expose DOE features via sysfs PCIe r6.0 added support for Data Object Exchange (DOE). When DOE is supported, the DOE Discovery Feature must be implemented per PCIe r6.1, sec 6.30.1.1. DOE allows a requester to obtain information about the other DOE features supported by the device. The kernel already queries the DOE features supported and caches the values. Expose the values in sysfs to allow user space to determine which DOE features are supported by the PCIe device. By exposing the information to userspace, tools like lspci can relay the information to users. By listing all of the supported features we can allow userspace to parse the list, which might include vendor specific features as well as yet to be supported features. As the DOE Discovery feature must always be supported we treat it as a special named attribute case. This allows the usual PCI attribute_group handling to correctly create the doe_features directory when registering pci_doe_sysfs_group (otherwise it doesn't and sysfs_add_file_to_group() will seg fault). After this patch is supported you can see something like this when attaching a DOE device: $ ls /sys/devices/pci0000:00/0000:00:02.0//doe* 0001:01 0001:02 doe_discovery Link: https://lore.kernel.org/r/20250306075211.1855177-3-alistair@alistair23.me Signed-off-by: Alistair Francis <alistair@alistair23.me> [bhelgaas: drop pci_doe_sysfs_init() stub return, make DEVICE_ATTR_RO(doe_discovery) static] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-06 17:52:10 +10:00
PCI/DOE: Poll DOE Busy bit for up to 1 second in pci_doe_send_req() During initial device probe, the PCI DOE busy bit for some CXL devices may be left set for a longer period than expected by the current driver logic. Despite local comments stating DOE Busy is unlikely to be detected, it appears commonly specifically during boot when CXL devices are being probed. The symptom was messages like this: endpoint6: DOE failed -EBUSY produced by cxl_cdat_get_length() or cxl_cdat_read_table(). This was observed on a single socket AMD platform with 2 CXL memory expanders attached to the single socket. It was not the case that concurrent accesses were being made, as validated by monitoring mailbox commands on the device side. This behavior has been observed with multiple CXL memory expanders from different vendors - so it appears unrelated to the model. In all observed tests, only a small period of the retry window is actually used - typically only a handful of loop iterations. Polling on the PCI DOE Busy Bit for (at max) one PCI DOE timeout interval (1 second), resolves this issue cleanly. Per PCIe r6.2 sec 6.30.3, the DOE Busy Bit being cleared does not raise an interrupt, so polling is the best option in this scenario. Subsequent code in doe_statemachine_work() and abort paths also wait for up to 1 PCI DOE timeout interval, so this order of (potential) additional delay is presumed acceptable. Suggested-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/20241004162828.314-1-gourry@gourry.net Signed-off-by: Gregory Price <gourry@gourry.net> [bhelgaas: fix nits and add error message to commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-04 12:28:28 -04:00
PCI/DOE: Poll DOE Busy bit for up to 1 second in pci_doe_send_req() During initial device probe, the PCI DOE busy bit for some CXL devices may be left set for a longer period than expected by the current driver logic. Despite local comments stating DOE Busy is unlikely to be detected, it appears commonly specifically during boot when CXL devices are being probed. The symptom was messages like this: endpoint6: DOE failed -EBUSY produced by cxl_cdat_get_length() or cxl_cdat_read_table(). This was observed on a single socket AMD platform with 2 CXL memory expanders attached to the single socket. It was not the case that concurrent accesses were being made, as validated by monitoring mailbox commands on the device side. This behavior has been observed with multiple CXL memory expanders from different vendors - so it appears unrelated to the model. In all observed tests, only a small period of the retry window is actually used - typically only a handful of loop iterations. Polling on the PCI DOE Busy Bit for (at max) one PCI DOE timeout interval (1 second), resolves this issue cleanly. Per PCIe r6.2 sec 6.30.3, the DOE Busy Bit being cleared does not raise an interrupt, so polling is the best option in this scenario. Subsequent code in doe_statemachine_work() and abort paths also wait for up to 1 PCI DOE timeout interval, so this order of (potential) additional delay is presumed acceptable. Suggested-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/20241004162828.314-1-gourry@gourry.net Signed-off-by: Gregory Price <gourry@gourry.net> [bhelgaas: fix nits and add error message to commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-04 12:28:28 -04:00
PCI/DOE: Poll DOE Busy bit for up to 1 second in pci_doe_send_req() During initial device probe, the PCI DOE busy bit for some CXL devices may be left set for a longer period than expected by the current driver logic. Despite local comments stating DOE Busy is unlikely to be detected, it appears commonly specifically during boot when CXL devices are being probed. The symptom was messages like this: endpoint6: DOE failed -EBUSY produced by cxl_cdat_get_length() or cxl_cdat_read_table(). This was observed on a single socket AMD platform with 2 CXL memory expanders attached to the single socket. It was not the case that concurrent accesses were being made, as validated by monitoring mailbox commands on the device side. This behavior has been observed with multiple CXL memory expanders from different vendors - so it appears unrelated to the model. In all observed tests, only a small period of the retry window is actually used - typically only a handful of loop iterations. Polling on the PCI DOE Busy Bit for (at max) one PCI DOE timeout interval (1 second), resolves this issue cleanly. Per PCIe r6.2 sec 6.30.3, the DOE Busy Bit being cleared does not raise an interrupt, so polling is the best option in this scenario. Subsequent code in doe_statemachine_work() and abort paths also wait for up to 1 PCI DOE timeout interval, so this order of (potential) additional delay is presumed acceptable. Suggested-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/20241004162828.314-1-gourry@gourry.net Signed-off-by: Gregory Price <gourry@gourry.net> [bhelgaas: fix nits and add error message to commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-04 12:28:28 -04:00
cxl/pci: Fix CDAT retrieval on big endian The CDAT exposed in sysfs differs between little endian and big endian arches: On big endian, every 4 bytes are byte-swapped. PCI Configuration Space is little endian (PCI r3.0 sec 6.1). Accessors such as pci_read_config_dword() implicitly swap bytes on big endian. That way, the macros in include/uapi/linux/pci_regs.h work regardless of the arch's endianness. For an example of implicit byte-swapping, see ppc4xx_pciex_read_config(), which calls in_le32(), which uses lwbrx (Load Word Byte-Reverse Indexed). DOE Read/Write Data Mailbox Registers are unlike other registers in Configuration Space in that they contain or receive a 4 byte portion of an opaque byte stream (a "Data Object" per PCIe r6.0 sec 7.9.24.5f). They need to be copied to or from the request/response buffer verbatim. So amend pci_doe_send_req() and pci_doe_recv_resp() to undo the implicit byte-swapping. The CXL_DOE_TABLE_ACCESS_* and PCI_DOE_DATA_OBJECT_DISC_* macros assume implicit byte-swapping. Byte-swap requests after constructing them with those macros and byte-swap responses before parsing them. Change the request and response type to __le32 to avoid sparse warnings. Per a request from Jonathan, replace sizeof(u32) with sizeof(__le32) for consistency. Fixes: c97006046c79 ("cxl/port: Read CDAT table") Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: stable@vger.kernel.org # v6.0+ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/3051114102f41d19df3debbee123129118fc5e6d.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-03-11 15:40:01 +01:00
cxl/pci: Fix CDAT retrieval on big endian The CDAT exposed in sysfs differs between little endian and big endian arches: On big endian, every 4 bytes are byte-swapped. PCI Configuration Space is little endian (PCI r3.0 sec 6.1). Accessors such as pci_read_config_dword() implicitly swap bytes on big endian. That way, the macros in include/uapi/linux/pci_regs.h work regardless of the arch's endianness. For an example of implicit byte-swapping, see ppc4xx_pciex_read_config(), which calls in_le32(), which uses lwbrx (Load Word Byte-Reverse Indexed). DOE Read/Write Data Mailbox Registers are unlike other registers in Configuration Space in that they contain or receive a 4 byte portion of an opaque byte stream (a "Data Object" per PCIe r6.0 sec 7.9.24.5f). They need to be copied to or from the request/response buffer verbatim. So amend pci_doe_send_req() and pci_doe_recv_resp() to undo the implicit byte-swapping. The CXL_DOE_TABLE_ACCESS_* and PCI_DOE_DATA_OBJECT_DISC_* macros assume implicit byte-swapping. Byte-swap requests after constructing them with those macros and byte-swap responses before parsing them. Change the request and response type to __le32 to avoid sparse warnings. Per a request from Jonathan, replace sizeof(u32) with sizeof(__le32) for consistency. Fixes: c97006046c79 ("cxl/port: Read CDAT table") Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: stable@vger.kernel.org # v6.0+ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/3051114102f41d19df3debbee123129118fc5e6d.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-03-11 15:40:01 +01:00
cxl/pci: Fix CDAT retrieval on big endian The CDAT exposed in sysfs differs between little endian and big endian arches: On big endian, every 4 bytes are byte-swapped. PCI Configuration Space is little endian (PCI r3.0 sec 6.1). Accessors such as pci_read_config_dword() implicitly swap bytes on big endian. That way, the macros in include/uapi/linux/pci_regs.h work regardless of the arch's endianness. For an example of implicit byte-swapping, see ppc4xx_pciex_read_config(), which calls in_le32(), which uses lwbrx (Load Word Byte-Reverse Indexed). DOE Read/Write Data Mailbox Registers are unlike other registers in Configuration Space in that they contain or receive a 4 byte portion of an opaque byte stream (a "Data Object" per PCIe r6.0 sec 7.9.24.5f). They need to be copied to or from the request/response buffer verbatim. So amend pci_doe_send_req() and pci_doe_recv_resp() to undo the implicit byte-swapping. The CXL_DOE_TABLE_ACCESS_* and PCI_DOE_DATA_OBJECT_DISC_* macros assume implicit byte-swapping. Byte-swap requests after constructing them with those macros and byte-swap responses before parsing them. Change the request and response type to __le32 to avoid sparse warnings. Per a request from Jonathan, replace sizeof(u32) with sizeof(__le32) for consistency. Fixes: c97006046c79 ("cxl/port: Read CDAT table") Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: stable@vger.kernel.org # v6.0+ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/3051114102f41d19df3debbee123129118fc5e6d.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-03-11 15:40:01 +01:00
cxl/pci: Fix CDAT retrieval on big endian The CDAT exposed in sysfs differs between little endian and big endian arches: On big endian, every 4 bytes are byte-swapped. PCI Configuration Space is little endian (PCI r3.0 sec 6.1). Accessors such as pci_read_config_dword() implicitly swap bytes on big endian. That way, the macros in include/uapi/linux/pci_regs.h work regardless of the arch's endianness. For an example of implicit byte-swapping, see ppc4xx_pciex_read_config(), which calls in_le32(), which uses lwbrx (Load Word Byte-Reverse Indexed). DOE Read/Write Data Mailbox Registers are unlike other registers in Configuration Space in that they contain or receive a 4 byte portion of an opaque byte stream (a "Data Object" per PCIe r6.0 sec 7.9.24.5f). They need to be copied to or from the request/response buffer verbatim. So amend pci_doe_send_req() and pci_doe_recv_resp() to undo the implicit byte-swapping. The CXL_DOE_TABLE_ACCESS_* and PCI_DOE_DATA_OBJECT_DISC_* macros assume implicit byte-swapping. Byte-swap requests after constructing them with those macros and byte-swap responses before parsing them. Change the request and response type to __le32 to avoid sparse warnings. Per a request from Jonathan, replace sizeof(u32) with sizeof(__le32) for consistency. Fixes: c97006046c79 ("cxl/port: Read CDAT table") Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: stable@vger.kernel.org # v6.0+ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/3051114102f41d19df3debbee123129118fc5e6d.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-03-11 15:40:01 +01:00
cxl/pci: Fix CDAT retrieval on big endian The CDAT exposed in sysfs differs between little endian and big endian arches: On big endian, every 4 bytes are byte-swapped. PCI Configuration Space is little endian (PCI r3.0 sec 6.1). Accessors such as pci_read_config_dword() implicitly swap bytes on big endian. That way, the macros in include/uapi/linux/pci_regs.h work regardless of the arch's endianness. For an example of implicit byte-swapping, see ppc4xx_pciex_read_config(), which calls in_le32(), which uses lwbrx (Load Word Byte-Reverse Indexed). DOE Read/Write Data Mailbox Registers are unlike other registers in Configuration Space in that they contain or receive a 4 byte portion of an opaque byte stream (a "Data Object" per PCIe r6.0 sec 7.9.24.5f). They need to be copied to or from the request/response buffer verbatim. So amend pci_doe_send_req() and pci_doe_recv_resp() to undo the implicit byte-swapping. The CXL_DOE_TABLE_ACCESS_* and PCI_DOE_DATA_OBJECT_DISC_* macros assume implicit byte-swapping. Byte-swap requests after constructing them with those macros and byte-swap responses before parsing them. Change the request and response type to __le32 to avoid sparse warnings. Per a request from Jonathan, replace sizeof(u32) with sizeof(__le32) for consistency. Fixes: c97006046c79 ("cxl/port: Read CDAT table") Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: stable@vger.kernel.org # v6.0+ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/3051114102f41d19df3debbee123129118fc5e6d.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-03-11 15:40:01 +01:00
PCI/DOE: Silence WARN splat with CONFIG_DEBUG_OBJECTS=y Gregory Price reports a WARN splat with CONFIG_DEBUG_OBJECTS=y upon CXL probing because pci_doe_submit_task() invokes INIT_WORK() instead of INIT_WORK_ONSTACK() for a work_struct that was allocated on the stack. All callers of pci_doe_submit_task() allocate the work_struct on the stack, so replace INIT_WORK() with INIT_WORK_ONSTACK() as a backportable short-term fix. The long-term fix implemented by a subsequent commit is to move to a synchronous API which allocates the work_struct internally in the DOE library. Stacktrace for posterity: WARNING: CPU: 0 PID: 23 at lib/debugobjects.c:545 __debug_object_init.cold+0x18/0x183 CPU: 0 PID: 23 Comm: kworker/u2:1 Not tainted 6.1.0-0.rc1.20221019gitaae703b02f92.17.fc38.x86_64 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: pci_doe_submit_task+0x5d/0xd0 pci_doe_discovery+0xb4/0x100 pcim_doe_create_mb+0x219/0x290 cxl_pci_probe+0x192/0x430 local_pci_probe+0x41/0x80 pci_device_probe+0xb3/0x220 really_probe+0xde/0x380 __driver_probe_device+0x78/0x170 driver_probe_device+0x1f/0x90 __driver_attach_async_helper+0x5c/0xe0 async_run_entry_fn+0x30/0x130 process_one_work+0x294/0x5b0 Fixes: 9d24322e887b ("PCI/DOE: Add DOE mailbox support functions") Link: https://lore.kernel.org/linux-cxl/Y1bOniJliOFszvIK@memverge.com/ Reported-by: Gregory Price <gregory.price@memverge.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Gregory Price <gregory.price@memverge.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Gregory Price <gregory.price@memverge.com> Cc: stable@vger.kernel.org # v6.0+ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/67a9117f463ecdb38a2dbca6a20391ce2f1e7a06.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-03-11 15:40:05 +01:00
PCI/DOE: Silence WARN splat with CONFIG_DEBUG_OBJECTS=y Gregory Price reports a WARN splat with CONFIG_DEBUG_OBJECTS=y upon CXL probing because pci_doe_submit_task() invokes INIT_WORK() instead of INIT_WORK_ONSTACK() for a work_struct that was allocated on the stack. All callers of pci_doe_submit_task() allocate the work_struct on the stack, so replace INIT_WORK() with INIT_WORK_ONSTACK() as a backportable short-term fix. The long-term fix implemented by a subsequent commit is to move to a synchronous API which allocates the work_struct internally in the DOE library. Stacktrace for posterity: WARNING: CPU: 0 PID: 23 at lib/debugobjects.c:545 __debug_object_init.cold+0x18/0x183 CPU: 0 PID: 23 Comm: kworker/u2:1 Not tainted 6.1.0-0.rc1.20221019gitaae703b02f92.17.fc38.x86_64 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: pci_doe_submit_task+0x5d/0xd0 pci_doe_discovery+0xb4/0x100 pcim_doe_create_mb+0x219/0x290 cxl_pci_probe+0x192/0x430 local_pci_probe+0x41/0x80 pci_device_probe+0xb3/0x220 really_probe+0xde/0x380 __driver_probe_device+0x78/0x170 driver_probe_device+0x1f/0x90 __driver_attach_async_helper+0x5c/0xe0 async_run_entry_fn+0x30/0x130 process_one_work+0x294/0x5b0 Fixes: 9d24322e887b ("PCI/DOE: Add DOE mailbox support functions") Link: https://lore.kernel.org/linux-cxl/Y1bOniJliOFszvIK@memverge.com/ Reported-by: Gregory Price <gregory.price@memverge.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Gregory Price <gregory.price@memverge.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Gregory Price <gregory.price@memverge.com> Cc: stable@vger.kernel.org # v6.0+ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/67a9117f463ecdb38a2dbca6a20391ce2f1e7a06.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-03-11 15:40:05 +01:00
PCI/DOE: Create mailboxes on device enumeration Currently a DOE instance cannot be shared by multiple drivers because each driver creates its own pci_doe_mb struct for a given DOE instance. For the same reason a DOE instance cannot be shared between the PCI core and a driver. Moreover, finding out which protocols a DOE instance supports requires creating a pci_doe_mb for it. If a device has multiple DOE instances, a driver looking for a specific protocol may need to create a pci_doe_mb for each of the device's DOE instances and then destroy those which do not support the desired protocol. That's obviously an inefficient way to do things. Overcome these issues by creating mailboxes in the PCI core on device enumeration. Provide a pci_find_doe_mailbox() API call to allow drivers to get a pci_doe_mb for a given (pci_dev, vendor, protocol) triple. This API is modeled after pci_find_capability() and can later be amended with a pci_find_next_doe_mailbox() call to iterate over all mailboxes of a given pci_dev which support a specific protocol. On removal, destroy the mailboxes in pci_destroy_dev(), after the driver is unbound. This allows drivers to use DOE in their ->remove() hook. On surprise removal, cancel ongoing DOE exchanges and prevent new ones from being scheduled. Thereby ensure that a hot-removed device doesn't needlessly wait for a running exchange to time out. Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ming Li <ming4.li@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/40a6f973f72ef283d79dd55e7e6fddc7481199af.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-03-11 15:40:12 +01:00
PCI/DOE: Create mailboxes on device enumeration Currently a DOE instance cannot be shared by multiple drivers because each driver creates its own pci_doe_mb struct for a given DOE instance. For the same reason a DOE instance cannot be shared between the PCI core and a driver. Moreover, finding out which protocols a DOE instance supports requires creating a pci_doe_mb for it. If a device has multiple DOE instances, a driver looking for a specific protocol may need to create a pci_doe_mb for each of the device's DOE instances and then destroy those which do not support the desired protocol. That's obviously an inefficient way to do things. Overcome these issues by creating mailboxes in the PCI core on device enumeration. Provide a pci_find_doe_mailbox() API call to allow drivers to get a pci_doe_mb for a given (pci_dev, vendor, protocol) triple. This API is modeled after pci_find_capability() and can later be amended with a pci_find_next_doe_mailbox() call to iterate over all mailboxes of a given pci_dev which support a specific protocol. On removal, destroy the mailboxes in pci_destroy_dev(), after the driver is unbound. This allows drivers to use DOE in their ->remove() hook. On surprise removal, cancel ongoing DOE exchanges and prevent new ones from being scheduled. Thereby ensure that a hot-removed device doesn't needlessly wait for a running exchange to time out. Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ming Li <ming4.li@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/40a6f973f72ef283d79dd55e7e6fddc7481199af.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-03-11 15:40:12 +01:00
PCI/DOE: Create mailboxes on device enumeration Currently a DOE instance cannot be shared by multiple drivers because each driver creates its own pci_doe_mb struct for a given DOE instance. For the same reason a DOE instance cannot be shared between the PCI core and a driver. Moreover, finding out which protocols a DOE instance supports requires creating a pci_doe_mb for it. If a device has multiple DOE instances, a driver looking for a specific protocol may need to create a pci_doe_mb for each of the device's DOE instances and then destroy those which do not support the desired protocol. That's obviously an inefficient way to do things. Overcome these issues by creating mailboxes in the PCI core on device enumeration. Provide a pci_find_doe_mailbox() API call to allow drivers to get a pci_doe_mb for a given (pci_dev, vendor, protocol) triple. This API is modeled after pci_find_capability() and can later be amended with a pci_find_next_doe_mailbox() call to iterate over all mailboxes of a given pci_dev which support a specific protocol. On removal, destroy the mailboxes in pci_destroy_dev(), after the driver is unbound. This allows drivers to use DOE in their ->remove() hook. On surprise removal, cancel ongoing DOE exchanges and prevent new ones from being scheduled. Thereby ensure that a hot-removed device doesn't needlessly wait for a running exchange to time out. Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ming Li <ming4.li@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/40a6f973f72ef283d79dd55e7e6fddc7481199af.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-03-11 15:40:12 +01:00
PCI/DOE: Create mailboxes on device enumeration Currently a DOE instance cannot be shared by multiple drivers because each driver creates its own pci_doe_mb struct for a given DOE instance. For the same reason a DOE instance cannot be shared between the PCI core and a driver. Moreover, finding out which protocols a DOE instance supports requires creating a pci_doe_mb for it. If a device has multiple DOE instances, a driver looking for a specific protocol may need to create a pci_doe_mb for each of the device's DOE instances and then destroy those which do not support the desired protocol. That's obviously an inefficient way to do things. Overcome these issues by creating mailboxes in the PCI core on device enumeration. Provide a pci_find_doe_mailbox() API call to allow drivers to get a pci_doe_mb for a given (pci_dev, vendor, protocol) triple. This API is modeled after pci_find_capability() and can later be amended with a pci_find_next_doe_mailbox() call to iterate over all mailboxes of a given pci_dev which support a specific protocol. On removal, destroy the mailboxes in pci_destroy_dev(), after the driver is unbound. This allows drivers to use DOE in their ->remove() hook. On surprise removal, cancel ongoing DOE exchanges and prevent new ones from being scheduled. Thereby ensure that a hot-removed device doesn't needlessly wait for a running exchange to time out. Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ming Li <ming4.li@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/40a6f973f72ef283d79dd55e7e6fddc7481199af.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-03-11 15:40:12 +01:00