linux/drivers/video/console/dummycon.c

159 lines
3.9 KiB

dummycon: limit Arm console size hack to footbridge The dummycon default console size used to be determined by architecture, but now this is a Kconfig setting on everything except ARM. Tracing this back in the historic git trees, this was used to match the size of VGA console or VGA framebuffer on early machines, but nowadays that code is no longer used, except probably on the old footbridge/netwinder since that is the only one that supports vgacon. On machines with a framebuffer, booting with DT so far results in always using the hardcoded 80x30 size in dummycon, while on ATAGS the setting can come from a bootloader specific override. Both seem to be worse choices than the Kconfig setting, since the actual text size for fbcon also depends on the selected font. Make this work the same way as everywhere else and use the normal Kconfig setting, except for the footbridge with vgacon, which keeps using the traditional code. If vgacon is disabled, footbridge can also ignore the setting. This means the screen_info only has to be provided when either vgacon or EFI are enabled now. To limit the amount of surprises on Arm, change the Kconfig default to the previously used 80x30 setting instead of the usual 80x25. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231009211845.3136536-4-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-09 23:18:39 +02:00
dummycon: Trigger redraw when switching consoles with deferred takeover Signal vt subsystem to redraw console when switching to dummycon with deferred takeover enabled. Makes the console switch to fbcon and displays the available output. With deferred takeover enabled, dummycon acts as the placeholder until the first output to the console happens. At that point, fbcon takes over. If the output happens while dummycon is not active, it cannot inform fbcon. This is the case if the vt subsystem runs in graphics mode. A typical graphical boot starts plymouth, a display manager and a compositor; all while leaving out dummycon. Switching to a text-mode console leaves the console with dummycon even if a getty terminal has been started. Returning true from dummycon's con_switch helper signals the vt subsystem to redraw the screen. If there's output available dummycon's con_putc{s} helpers trigger deferred takeover of fbcon, which sets a display mode and displays the output. If no output is available, dummycon remains active. v2: - make the comment slightly more verbose (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Andrei Borzenkov <arvidjaar@gmail.com> Closes: https://bugzilla.suse.com/show_bug.cgi?id=1242191 Tested-by: Andrei Borzenkov <arvidjaar@gmail.com> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Fixes: 83d83bebf401 ("console/fbcon: Add support for deferred console takeover") Cc: Hans de Goede <hdegoede@redhat.com> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.19+ Link: https://lore.kernel.org/r/20250520071418.8462-1-tzimmermann@suse.de
2025-05-20 09:14:00 +02:00
dummycon: Trigger redraw when switching consoles with deferred takeover Signal vt subsystem to redraw console when switching to dummycon with deferred takeover enabled. Makes the console switch to fbcon and displays the available output. With deferred takeover enabled, dummycon acts as the placeholder until the first output to the console happens. At that point, fbcon takes over. If the output happens while dummycon is not active, it cannot inform fbcon. This is the case if the vt subsystem runs in graphics mode. A typical graphical boot starts plymouth, a display manager and a compositor; all while leaving out dummycon. Switching to a text-mode console leaves the console with dummycon even if a getty terminal has been started. Returning true from dummycon's con_switch helper signals the vt subsystem to redraw the screen. If there's output available dummycon's con_putc{s} helpers trigger deferred takeover of fbcon, which sets a display mode and displays the output. If no output is available, dummycon remains active. v2: - make the comment slightly more verbose (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Andrei Borzenkov <arvidjaar@gmail.com> Closes: https://bugzilla.suse.com/show_bug.cgi?id=1242191 Tested-by: Andrei Borzenkov <arvidjaar@gmail.com> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Fixes: 83d83bebf401 ("console/fbcon: Add support for deferred console takeover") Cc: Hans de Goede <hdegoede@redhat.com> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.19+ Link: https://lore.kernel.org/r/20250520071418.8462-1-tzimmermann@suse.de
2025-05-20 09:14:00 +02:00