linux/fs/overlayfs/file.c

652 lines
15 KiB

lsm: add backing_file LSM hooks Stacked filesystems such as overlayfs do not currently provide the necessary mechanisms for LSMs to properly enforce access controls on the mmap() and mprotect() operations. In order to resolve this gap, a LSM security blob is being added to the backing_file struct and the following new LSM hooks are being created: security_backing_file_alloc() security_backing_file_free() security_mmap_backing_file() The first two hooks are to manage the lifecycle of the LSM security blob in the backing_file struct, while the third provides a new mmap() access control point for the underlying backing file. It is also expected that LSMs will likely want to update their security_file_mprotect() callback to address issues with their mprotect() controls, but that does not require a change to the security_file_mprotect() LSM hook. There are a three other small changes to support these new LSM hooks: * Pass the user file associated with a backing file down to alloc_empty_backing_file() so it can be included in the security_backing_file_alloc() hook. * Add getter and setter functions for the backing_file struct LSM blob as the backing_file struct remains private to fs/file_table.c. * Constify the file struct field in the LSM common_audit_data struct to better support LSMs that need to pass a const file struct pointer into the common LSM audit code. Thanks to Arnd Bergmann for identifying the missing EXPORT_SYMBOL_GPL() and supplying a fixup. Cc: stable@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-unionfs@vger.kernel.org Cc: linux-erofs@lists.ozlabs.org Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2025-12-19 13:18:22 -05:00
struct fd: representation change We want the compiler to see that fdput() on empty instance is a no-op. The emptiness check is that file reference is NULL, while fdput() is "fput() if FDPUT_FPUT is present in flags". The reason why fdput() on empty instance is a no-op is something compiler can't see - it's that we never generate instances with NULL file reference combined with non-zero flags. It's not that hard to deal with - the real primitives behind fdget() et.al. are returning an unsigned long value, unpacked by (inlined) __to_fd() into the current struct file * + int. The lower bits are used to store flags, while the rest encodes the pointer. Linus suggested that keeping this unsigned long around with the extractions done by inlined accessors should generate a sane code and that turns out to be the case. Namely, turning struct fd into a struct-wrapped unsinged long, with fd_empty(f) => unlikely(f.word == 0) fd_file(f) => (struct file *)(f.word & ~3) fdput(f) => if (f.word & 1) fput(fd_file(f)) ends up with compiler doing the right thing. The cost is the patch footprint, of course - we need to switch f.file to fd_file(f) all over the tree, and it's not doable with simple search and replace; there are false positives, etc. Note that the sole member of that structure is an opaque unsigned long - all accesses should be done via wrappers and I don't want to use a name that would invite manual casts to file pointers, etc. The value of that member is equal either to (unsigned long)p | flags, p being an address of some struct file instance, or to 0 for an empty fd. For now the new predicate (fd_empty(f)) has no users; all the existing checks have form (!fd_file(f)). We will convert to fd_empty() use later; here we only define it (and tell the compiler that it's unlikely to return true). This commit only deals with representation change; there will be followups. Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2024-05-31 15:45:12 -04:00
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-08-31 14:15:29 -04:00
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-08-31 14:15:29 -04:00
ovl: implement volatile-specific fsync error behaviour Overlayfs's volatile option allows the user to bypass all forced sync calls to the upperdir filesystem. This comes at the cost of safety. We can never ensure that the user's data is intact, but we can make a best effort to expose whether or not the data is likely to be in a bad state. The best way to handle this in the time being is that if an overlayfs's upperdir experiences an error after a volatile mount occurs, that error will be returned on fsync, fdatasync, sync, and syncfs. This is contradictory to the traditional behaviour of VFS which fails the call once, and only raises an error if a subsequent fsync error has occurred, and been raised by the filesystem. One awkward aspect of the patch is that we have to manually set the superblock's errseq_t after the sync_fs callback as opposed to just returning an error from syncfs. This is because the call chain looks something like this: sys_syncfs -> sync_filesystem -> __sync_filesystem -> /* The return value is ignored here sb->s_op->sync_fs(sb) _sync_blockdev /* Where the VFS fetches the error to raise to userspace */ errseq_check_and_advance Because of this we call errseq_set every time the sync_fs callback occurs. Due to the nature of this seen / unseen dichotomy, if the upperdir is an inconsistent state at the initial mount time, overlayfs will refuse to mount, as overlayfs cannot get a snapshot of the upperdir's errseq that will increment on error until the user calls syncfs. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Suggested-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Fixes: c86243b090bc ("ovl: provide a mount option "volatile"") Cc: stable@vger.kernel.org Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-01-07 16:10:43 -08:00
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-08-31 14:15:29 -04:00