linux/fs/verity/verify.c

499 lines
16 KiB

fsverity: remove hash page spin lock The spin lock is not necessary here as it can be replaced with memory barrier which should be better performance-wise. When Merkle tree block size differs from page size, in is_hash_block_verified() two things are modified during check - a bitmap and PG_checked flag of the page. Each bit in the bitmap represent verification status of the Merkle tree blocks. PG_checked flag tells if page was just re-instantiated or was in pagecache. Both of this states are shared between verification threads. Page which was re-instantiated can not have already verified blocks (bit set in bitmap). The spin lock was used to allow only one thread to modify both of these states and keep order of operations. The only requirement here is that PG_Checked is set strictly after bitmap is updated. This way other threads which see that PG_Checked=1 (page cached) knows that bitmap is up-to-date. Otherwise, if PG_Checked is set before bitmap is cleared, other threads can see bit=1 and therefore will not perform verification of that Merkle tree block. However, there's still the case when one thread is setting a bit in verify_data_block() and other thread is clearing it in is_hash_block_verified(). This can happen if two threads get to !PageChecked branch and one of the threads is rescheduled before resetting the bitmap. This is fine as at worst blocks are re-verified in each thread. Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com> [ebiggers: improved the comment and removed the 'verified' variable] Link: https://lore.kernel.org/r/20240201052813.68380-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2024-01-31 21:28:13 -08:00
fsverity: remove hash page spin lock The spin lock is not necessary here as it can be replaced with memory barrier which should be better performance-wise. When Merkle tree block size differs from page size, in is_hash_block_verified() two things are modified during check - a bitmap and PG_checked flag of the page. Each bit in the bitmap represent verification status of the Merkle tree blocks. PG_checked flag tells if page was just re-instantiated or was in pagecache. Both of this states are shared between verification threads. Page which was re-instantiated can not have already verified blocks (bit set in bitmap). The spin lock was used to allow only one thread to modify both of these states and keep order of operations. The only requirement here is that PG_Checked is set strictly after bitmap is updated. This way other threads which see that PG_Checked=1 (page cached) knows that bitmap is up-to-date. Otherwise, if PG_Checked is set before bitmap is cleared, other threads can see bit=1 and therefore will not perform verification of that Merkle tree block. However, there's still the case when one thread is setting a bit in verify_data_block() and other thread is clearing it in is_hash_block_verified(). This can happen if two threads get to !PageChecked branch and one of the threads is rescheduled before resetting the bitmap. This is fine as at worst blocks are re-verified in each thread. Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com> [ebiggers: improved the comment and removed the 'verified' variable] Link: https://lore.kernel.org/r/20240201052813.68380-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2024-01-31 21:28:13 -08:00
fsverity: remove hash page spin lock The spin lock is not necessary here as it can be replaced with memory barrier which should be better performance-wise. When Merkle tree block size differs from page size, in is_hash_block_verified() two things are modified during check - a bitmap and PG_checked flag of the page. Each bit in the bitmap represent verification status of the Merkle tree blocks. PG_checked flag tells if page was just re-instantiated or was in pagecache. Both of this states are shared between verification threads. Page which was re-instantiated can not have already verified blocks (bit set in bitmap). The spin lock was used to allow only one thread to modify both of these states and keep order of operations. The only requirement here is that PG_Checked is set strictly after bitmap is updated. This way other threads which see that PG_Checked=1 (page cached) knows that bitmap is up-to-date. Otherwise, if PG_Checked is set before bitmap is cleared, other threads can see bit=1 and therefore will not perform verification of that Merkle tree block. However, there's still the case when one thread is setting a bit in verify_data_block() and other thread is clearing it in is_hash_block_verified(). This can happen if two threads get to !PageChecked branch and one of the threads is rescheduled before resetting the bitmap. This is fine as at worst blocks are re-verified in each thread. Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com> [ebiggers: improved the comment and removed the 'verified' variable] Link: https://lore.kernel.org/r/20240201052813.68380-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2024-01-31 21:28:13 -08:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
fsverity: use shash API instead of ahash API The "ahash" API, like the other scatterlist-based crypto APIs such as "skcipher", comes with some well-known limitations. First, it can't easily be used with vmalloc addresses. Second, the request struct can't be allocated on the stack. This adds complexity and a possible failure point that needs to be worked around, e.g. using a mempool. The only benefit of ahash over "shash" is that ahash is needed to access traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/. However, this style of crypto acceleration has largely fallen out of favor and been superseded by CPU-based acceleration or inline crypto engines. Also, ahash needs to be used asynchronously to take full advantage of such hardware, but fs/verity/ has never done this. On all systems that aren't actually using one of these ahash-only crypto accelerators, ahash just adds unnecessary overhead as it sits between the user and the underlying shash algorithms. Also, XFS is planned to cache fsverity Merkle tree blocks in the existing XFS buffer cache. As a result, it will be possible for a single Merkle tree block to be split across discontiguous pages (https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area). This data will need to be hashed. It is easiest to work with a vmapped address in this case. However, ahash is incompatible with this. Therefore, let's convert fs/verity/ from ahash to shash. This simplifies the code, and it should also slightly improve performance for everyone who wasn't actually using one of these ahash-only crypto accelerators, i.e. almost everyone (or maybe even everyone)! Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-05-15 22:12:16 -07:00
2025-09-16 10:29:06 +02:00