linux/net/bluetooth/rfcomm/sock.c

1082 lines
22 KiB

Bluetooth: Fix inconsistent lock state with RFCOMM When receiving a rfcomm connection with the old dund deamon a inconsistent lock state happens. That's because interrupts were already disabled by l2cap_conn_start() when rfcomm_sk_state_change() try to lock the spin_lock. As result we may have a inconsistent lock state for l2cap_conn_start() after rfcomm_sk_state_change() calls bh_lock_sock() and disable interrupts as well. [ 2833.151999] [ 2833.151999] ================================= [ 2833.151999] [ INFO: inconsistent lock state ] [ 2833.151999] 2.6.36-rc3 #2 [ 2833.151999] --------------------------------- [ 2833.151999] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 2833.151999] krfcommd/2306 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 2833.151999] (slock-AF_BLUETOOTH){+.?...}, at: [<ffffffffa00bcb56>] rfcomm_sk_state_change+0x46/0x170 [rfcomm] [ 2833.151999] {IN-SOFTIRQ-W} state was registered at: [ 2833.151999] [<ffffffff81094346>] __lock_acquire+0x5b6/0x1560 [ 2833.151999] [<ffffffff8109534a>] lock_acquire+0x5a/0x70 [ 2833.151999] [<ffffffff81392b6c>] _raw_spin_lock+0x2c/0x40 [ 2833.151999] [<ffffffffa00a5092>] l2cap_conn_start+0x92/0x640 [l2cap] [ 2833.151999] [<ffffffffa00a6a3f>] l2cap_sig_channel+0x6bf/0x1320 [l2cap] [ 2833.151999] [<ffffffffa00a9173>] l2cap_recv_frame+0x133/0x770 [l2cap] [ 2833.151999] [<ffffffffa00a997b>] l2cap_recv_acldata+0x1cb/0x390 [l2cap] [ 2833.151999] [<ffffffffa000db4b>] hci_rx_task+0x2ab/0x450 [bluetooth] [ 2833.151999] [<ffffffff8106b22b>] tasklet_action+0xcb/0xe0 [ 2833.151999] [<ffffffff8106b91e>] __do_softirq+0xae/0x150 [ 2833.151999] [<ffffffff8102bc0c>] call_softirq+0x1c/0x30 [ 2833.151999] [<ffffffff8102ddb5>] do_softirq+0x75/0xb0 [ 2833.151999] [<ffffffff8106b56d>] irq_exit+0x8d/0xa0 [ 2833.151999] [<ffffffff8104484b>] smp_apic_timer_interrupt+0x6b/0xa0 [ 2833.151999] [<ffffffff8102b6d3>] apic_timer_interrupt+0x13/0x20 [ 2833.151999] [<ffffffff81029dfa>] cpu_idle+0x5a/0xb0 [ 2833.151999] [<ffffffff81381ded>] rest_init+0xad/0xc0 [ 2833.151999] [<ffffffff817ebc4d>] start_kernel+0x2dd/0x2e8 [ 2833.151999] [<ffffffff817eb2e6>] x86_64_start_reservations+0xf6/0xfa [ 2833.151999] [<ffffffff817eb3ce>] x86_64_start_kernel+0xe4/0xeb [ 2833.151999] irq event stamp: 731 [ 2833.151999] hardirqs last enabled at (731): [<ffffffff8106b762>] local_bh_enable_ip+0x82/0xe0 [ 2833.151999] hardirqs last disabled at (729): [<ffffffff8106b93e>] __do_softirq+0xce/0x150 [ 2833.151999] softirqs last enabled at (730): [<ffffffff8106b96e>] __do_softirq+0xfe/0x150 [ 2833.151999] softirqs last disabled at (711): [<ffffffff8102bc0c>] call_softirq+0x1c/0x30 [ 2833.151999] [ 2833.151999] other info that might help us debug this: [ 2833.151999] 2 locks held by krfcommd/2306: [ 2833.151999] #0: (rfcomm_mutex){+.+.+.}, at: [<ffffffffa00bb744>] rfcomm_run+0x174/0xb20 [rfcomm] [ 2833.151999] #1: (&(&d->lock)->rlock){+.+...}, at: [<ffffffffa00b9223>] rfcomm_dlc_accept+0x53/0x100 [rfcomm] [ 2833.151999] [ 2833.151999] stack backtrace: [ 2833.151999] Pid: 2306, comm: krfcommd Tainted: G W 2.6.36-rc3 #2 [ 2833.151999] Call Trace: [ 2833.151999] [<ffffffff810928e1>] print_usage_bug+0x171/0x180 [ 2833.151999] [<ffffffff810936c3>] mark_lock+0x333/0x400 [ 2833.151999] [<ffffffff810943ca>] __lock_acquire+0x63a/0x1560 [ 2833.151999] [<ffffffff810948b5>] ? __lock_acquire+0xb25/0x1560 [ 2833.151999] [<ffffffff8109534a>] lock_acquire+0x5a/0x70 [ 2833.151999] [<ffffffffa00bcb56>] ? rfcomm_sk_state_change+0x46/0x170 [rfcomm] [ 2833.151999] [<ffffffff81392b6c>] _raw_spin_lock+0x2c/0x40 [ 2833.151999] [<ffffffffa00bcb56>] ? rfcomm_sk_state_change+0x46/0x170 [rfcomm] [ 2833.151999] [<ffffffffa00bcb56>] rfcomm_sk_state_change+0x46/0x170 [rfcomm] [ 2833.151999] [<ffffffffa00b9239>] rfcomm_dlc_accept+0x69/0x100 [rfcomm] [ 2833.151999] [<ffffffffa00b9a49>] rfcomm_check_accept+0x59/0xd0 [rfcomm] [ 2833.151999] [<ffffffffa00bacab>] rfcomm_recv_frame+0x9fb/0x1320 [rfcomm] [ 2833.151999] [<ffffffff813932bb>] ? _raw_spin_unlock_irqrestore+0x3b/0x60 [ 2833.151999] [<ffffffff81093acd>] ? trace_hardirqs_on_caller+0x13d/0x180 [ 2833.151999] [<ffffffff81093b1d>] ? trace_hardirqs_on+0xd/0x10 [ 2833.151999] [<ffffffffa00bb7f1>] rfcomm_run+0x221/0xb20 [rfcomm] [ 2833.151999] [<ffffffff813905e7>] ? schedule+0x287/0x780 [ 2833.151999] [<ffffffffa00bb5d0>] ? rfcomm_run+0x0/0xb20 [rfcomm] [ 2833.151999] [<ffffffff81081026>] kthread+0x96/0xa0 [ 2833.151999] [<ffffffff8102bb14>] kernel_thread_helper+0x4/0x10 [ 2833.151999] [<ffffffff813936bc>] ? restore_args+0x0/0x30 [ 2833.151999] [<ffffffff81080f90>] ? kthread+0x0/0xa0 [ 2833.151999] [<ffffffff8102bb10>] ? kernel_thread_helper+0x0/0x10 Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-08-14 00:48:07 -03:00
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
net: make getname() functions return length rather than use int* parameter Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-12 20:00:20 +01:00
net: make getname() functions return length rather than use int* parameter Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-12 20:00:20 +01:00
Bluetooth: Fix issue with RFCOMM getsockopt operation The commit 94a86df01082557e2de45865e538d7fb6c46231c seem to have uncovered a long standing bug that did not trigger so far. BUG: unable to handle kernel paging request at 00000009dd503502 IP: [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200 PGD 0 Oops: 0000 [#1] SMP Modules linked in: ath5k ath mac80211 cfg80211 CPU: 2 PID: 1459 Comm: bluetoothd Not tainted 3.11.0-133163-gcebd830 #2 Hardware name: System manufacturer System Product Name/P6T DELUXE V2, BIOS 1202 12/22/2010 task: ffff8803304106a0 ti: ffff88033046a000 task.ti: ffff88033046a000 RIP: 0010:[<ffffffff815b1868>] [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200 RSP: 0018:ffff88033046bed8 EFLAGS: 00010246 RAX: 00000009dd503502 RBX: 0000000000000003 RCX: 00007fffa2ed5548 RDX: 0000000000000003 RSI: 0000000000000012 RDI: ffff88032fd37480 RBP: ffff88033046bf28 R08: 00007fffa2ed554c R09: ffff88032f5707d8 R10: 00007fffa2ed5548 R11: 0000000000000202 R12: ffff880330bbd000 R13: 00007fffa2ed5548 R14: 0000000000000003 R15: 00007fffa2ed554c FS: 00007fc44cfac700(0000) GS:ffff88033fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000009dd503502 CR3: 00000003304c2000 CR4: 00000000000007e0 Stack: ffff88033046bf28 ffffffff815b0f2f ffff88033046bf18 0002ffff81105ef6 0000000600000000 ffff88032fd37480 0000000000000012 00007fffa2ed5548 0000000000000003 00007fffa2ed554c ffff88033046bf78 ffffffff814c0380 Call Trace: [<ffffffff815b0f2f>] ? rfcomm_sock_setsockopt+0x5f/0x190 [<ffffffff814c0380>] SyS_getsockopt+0x60/0xb0 [<ffffffff815e0852>] system_call_fastpath+0x16/0x1b Code: 02 00 00 00 0f 47 d0 4c 89 ef e8 74 13 cd ff 83 f8 01 19 c9 f7 d1 83 e1 f2 e9 4b ff ff ff 0f 1f 44 00 00 49 8b 84 24 70 02 00 00 <4c> 8b 30 4c 89 c0 e8 2d 19 cd ff 85 c0 49 89 d7 b9 f2 ff ff ff RIP [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200 RSP <ffff88033046bed8> CR2: 00000009dd503502 It triggers in the following segment of the code: 0x1313 is in rfcomm_sock_getsockopt (net/bluetooth/rfcomm/sock.c:743). 738 739 static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __user *optval, int __user *optlen) 740 { 741 struct sock *sk = sock->sk; 742 struct rfcomm_conninfo cinfo; 743 struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn; 744 int len, err = 0; 745 u32 opt; 746 747 BT_DBG("sk %p", sk); The l2cap_pi(sk) is wrong here since it should have been rfcomm_pi(sk), but that socket of course does not contain the low-level connection details requested here. Tracking down the actual offending commit, it seems that this has been introduced when doing some L2CAP refactoring: commit 8c1d787be4b62d2d1b6f04953eca4bcf7c839d44 Author: Gustavo F. Padovan <padovan@profusion.mobi> Date: Wed Apr 13 20:23:55 2011 -0300 @@ -743,6 +743,7 @@ static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __u struct sock *sk = sock->sk; struct sock *l2cap_sk; struct rfcomm_conninfo cinfo; + struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn; int len, err = 0; u32 opt; @@ -787,8 +788,8 @@ static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __u l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk; - cinfo.hci_handle = l2cap_pi(l2cap_sk)->conn->hcon->handle; - memcpy(cinfo.dev_class, l2cap_pi(l2cap_sk)->conn->hcon->dev_class, 3); + cinfo.hci_handle = conn->hcon->handle; + memcpy(cinfo.dev_class, conn->hcon->dev_class, 3); The l2cap_sk got accidentally mixed into the sk (which is RFCOMM) and now causing a problem within getsocketopt() system call. To fix this, just re-introduce l2cap_sk and make sure the right socket is used for the low-level connection details. Reported-by: Fabio Rossi <rossi.f@inwind.it> Reported-by: Janusz Dziedzic <janusz.dziedzic@gmail.com> Tested-by: Janusz Dziedzic <janusz.dziedzic@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-11-02 02:36:31 -07:00
Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}() Commit 9bf4e919ccad worked around an issue introduced after an innocuous optimisation change in LLVM main: > len is defined as an 'int' because it is assigned from > '__user int *optlen'. However, it is clamped against the result of > sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit > platforms). This is done with min_t() because min() requires compatible > types, which results in both len and the result of sizeof() being casted > to 'unsigned int', meaning len changes signs and the result of sizeof() > is truncated. From there, len is passed to copy_to_user(), which has a > third parameter type of 'unsigned long', so it is widened and changes > signs again. This excessive casting in combination with the KCSAN > instrumentation causes LLVM to fail to eliminate the __bad_copy_from() > call, failing the build. The same issue occurs in rfcomm in functions rfcomm_sock_getsockopt and rfcomm_sock_getsockopt_old. Change the type of len to size_t in both rfcomm_sock_getsockopt and rfcomm_sock_getsockopt_old and replace min_t() with min(). Cc: stable@vger.kernel.org Co-authored-by: Aleksei Vetrov <vvvvvv@google.com> Improves: 9bf4e919ccad ("Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()") Link: https://github.com/ClangBuiltLinux/linux/issues/2007 Link: https://github.com/llvm/llvm-project/issues/85647 Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-09 14:14:24 +02:00
Bluetooth: Fix issue with RFCOMM getsockopt operation The commit 94a86df01082557e2de45865e538d7fb6c46231c seem to have uncovered a long standing bug that did not trigger so far. BUG: unable to handle kernel paging request at 00000009dd503502 IP: [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200 PGD 0 Oops: 0000 [#1] SMP Modules linked in: ath5k ath mac80211 cfg80211 CPU: 2 PID: 1459 Comm: bluetoothd Not tainted 3.11.0-133163-gcebd830 #2 Hardware name: System manufacturer System Product Name/P6T DELUXE V2, BIOS 1202 12/22/2010 task: ffff8803304106a0 ti: ffff88033046a000 task.ti: ffff88033046a000 RIP: 0010:[<ffffffff815b1868>] [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200 RSP: 0018:ffff88033046bed8 EFLAGS: 00010246 RAX: 00000009dd503502 RBX: 0000000000000003 RCX: 00007fffa2ed5548 RDX: 0000000000000003 RSI: 0000000000000012 RDI: ffff88032fd37480 RBP: ffff88033046bf28 R08: 00007fffa2ed554c R09: ffff88032f5707d8 R10: 00007fffa2ed5548 R11: 0000000000000202 R12: ffff880330bbd000 R13: 00007fffa2ed5548 R14: 0000000000000003 R15: 00007fffa2ed554c FS: 00007fc44cfac700(0000) GS:ffff88033fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000009dd503502 CR3: 00000003304c2000 CR4: 00000000000007e0 Stack: ffff88033046bf28 ffffffff815b0f2f ffff88033046bf18 0002ffff81105ef6 0000000600000000 ffff88032fd37480 0000000000000012 00007fffa2ed5548 0000000000000003 00007fffa2ed554c ffff88033046bf78 ffffffff814c0380 Call Trace: [<ffffffff815b0f2f>] ? rfcomm_sock_setsockopt+0x5f/0x190 [<ffffffff814c0380>] SyS_getsockopt+0x60/0xb0 [<ffffffff815e0852>] system_call_fastpath+0x16/0x1b Code: 02 00 00 00 0f 47 d0 4c 89 ef e8 74 13 cd ff 83 f8 01 19 c9 f7 d1 83 e1 f2 e9 4b ff ff ff 0f 1f 44 00 00 49 8b 84 24 70 02 00 00 <4c> 8b 30 4c 89 c0 e8 2d 19 cd ff 85 c0 49 89 d7 b9 f2 ff ff ff RIP [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200 RSP <ffff88033046bed8> CR2: 00000009dd503502 It triggers in the following segment of the code: 0x1313 is in rfcomm_sock_getsockopt (net/bluetooth/rfcomm/sock.c:743). 738 739 static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __user *optval, int __user *optlen) 740 { 741 struct sock *sk = sock->sk; 742 struct rfcomm_conninfo cinfo; 743 struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn; 744 int len, err = 0; 745 u32 opt; 746 747 BT_DBG("sk %p", sk); The l2cap_pi(sk) is wrong here since it should have been rfcomm_pi(sk), but that socket of course does not contain the low-level connection details requested here. Tracking down the actual offending commit, it seems that this has been introduced when doing some L2CAP refactoring: commit 8c1d787be4b62d2d1b6f04953eca4bcf7c839d44 Author: Gustavo F. Padovan <padovan@profusion.mobi> Date: Wed Apr 13 20:23:55 2011 -0300 @@ -743,6 +743,7 @@ static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __u struct sock *sk = sock->sk; struct sock *l2cap_sk; struct rfcomm_conninfo cinfo; + struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn; int len, err = 0; u32 opt; @@ -787,8 +788,8 @@ static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __u l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk; - cinfo.hci_handle = l2cap_pi(l2cap_sk)->conn->hcon->handle; - memcpy(cinfo.dev_class, l2cap_pi(l2cap_sk)->conn->hcon->dev_class, 3); + cinfo.hci_handle = conn->hcon->handle; + memcpy(cinfo.dev_class, conn->hcon->dev_class, 3); The l2cap_sk got accidentally mixed into the sk (which is RFCOMM) and now causing a problem within getsocketopt() system call. To fix this, just re-introduce l2cap_sk and make sure the right socket is used for the low-level connection details. Reported-by: Fabio Rossi <rossi.f@inwind.it> Reported-by: Janusz Dziedzic <janusz.dziedzic@gmail.com> Tested-by: Janusz Dziedzic <janusz.dziedzic@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-11-02 02:36:31 -07:00
Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}() Commit 9bf4e919ccad worked around an issue introduced after an innocuous optimisation change in LLVM main: > len is defined as an 'int' because it is assigned from > '__user int *optlen'. However, it is clamped against the result of > sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit > platforms). This is done with min_t() because min() requires compatible > types, which results in both len and the result of sizeof() being casted > to 'unsigned int', meaning len changes signs and the result of sizeof() > is truncated. From there, len is passed to copy_to_user(), which has a > third parameter type of 'unsigned long', so it is widened and changes > signs again. This excessive casting in combination with the KCSAN > instrumentation causes LLVM to fail to eliminate the __bad_copy_from() > call, failing the build. The same issue occurs in rfcomm in functions rfcomm_sock_getsockopt and rfcomm_sock_getsockopt_old. Change the type of len to size_t in both rfcomm_sock_getsockopt and rfcomm_sock_getsockopt_old and replace min_t() with min(). Cc: stable@vger.kernel.org Co-authored-by: Aleksei Vetrov <vvvvvv@google.com> Improves: 9bf4e919ccad ("Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()") Link: https://github.com/ClangBuiltLinux/linux/issues/2007 Link: https://github.com/llvm/llvm-project/issues/85647 Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-09 14:14:24 +02:00
Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}() Commit 9bf4e919ccad worked around an issue introduced after an innocuous optimisation change in LLVM main: > len is defined as an 'int' because it is assigned from > '__user int *optlen'. However, it is clamped against the result of > sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit > platforms). This is done with min_t() because min() requires compatible > types, which results in both len and the result of sizeof() being casted > to 'unsigned int', meaning len changes signs and the result of sizeof() > is truncated. From there, len is passed to copy_to_user(), which has a > third parameter type of 'unsigned long', so it is widened and changes > signs again. This excessive casting in combination with the KCSAN > instrumentation causes LLVM to fail to eliminate the __bad_copy_from() > call, failing the build. The same issue occurs in rfcomm in functions rfcomm_sock_getsockopt and rfcomm_sock_getsockopt_old. Change the type of len to size_t in both rfcomm_sock_getsockopt and rfcomm_sock_getsockopt_old and replace min_t() with min(). Cc: stable@vger.kernel.org Co-authored-by: Aleksei Vetrov <vvvvvv@google.com> Improves: 9bf4e919ccad ("Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()") Link: https://github.com/ClangBuiltLinux/linux/issues/2007 Link: https://github.com/llvm/llvm-project/issues/85647 Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-09 14:14:24 +02:00
Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}() Commit 9bf4e919ccad worked around an issue introduced after an innocuous optimisation change in LLVM main: > len is defined as an 'int' because it is assigned from > '__user int *optlen'. However, it is clamped against the result of > sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit > platforms). This is done with min_t() because min() requires compatible > types, which results in both len and the result of sizeof() being casted > to 'unsigned int', meaning len changes signs and the result of sizeof() > is truncated. From there, len is passed to copy_to_user(), which has a > third parameter type of 'unsigned long', so it is widened and changes > signs again. This excessive casting in combination with the KCSAN > instrumentation causes LLVM to fail to eliminate the __bad_copy_from() > call, failing the build. The same issue occurs in rfcomm in functions rfcomm_sock_getsockopt and rfcomm_sock_getsockopt_old. Change the type of len to size_t in both rfcomm_sock_getsockopt and rfcomm_sock_getsockopt_old and replace min_t() with min(). Cc: stable@vger.kernel.org Co-authored-by: Aleksei Vetrov <vvvvvv@google.com> Improves: 9bf4e919ccad ("Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()") Link: https://github.com/ClangBuiltLinux/linux/issues/2007 Link: https://github.com/llvm/llvm-project/issues/85647 Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-09 14:14:24 +02:00
Bluetooth: silence lockdep warning Since bluetooth uses multiple protocols types, to avoid lockdep warnings, we need to use different lockdep classes (one for each protocol type). This is already done in bt_sock_create but it misses a couple of cases when new connections are created. This patch corrects that to fix the following warning: <4>[ 1864.732366] ======================================================= <4>[ 1864.733030] [ INFO: possible circular locking dependency detected ] <4>[ 1864.733544] 3.0.16-mid3-00007-gc9a0f62 #3 <4>[ 1864.733883] ------------------------------------------------------- <4>[ 1864.734408] t.android.btclc/4204 is trying to acquire lock: <4>[ 1864.734869] (rfcomm_mutex){+.+.+.}, at: [<c14970ea>] rfcomm_dlc_close+0x15/0x30 <4>[ 1864.735541] <4>[ 1864.735549] but task is already holding lock: <4>[ 1864.736045] (sk_lock-AF_BLUETOOTH){+.+.+.}, at: [<c1498bf7>] lock_sock+0xa/0xc <4>[ 1864.736732] <4>[ 1864.736740] which lock already depends on the new lock. <4>[ 1864.736750] <4>[ 1864.737428] <4>[ 1864.737437] the existing dependency chain (in reverse order) is: <4>[ 1864.738016] <4>[ 1864.738023] -> #1 (sk_lock-AF_BLUETOOTH){+.+.+.}: <4>[ 1864.738549] [<c1062273>] lock_acquire+0x104/0x140 <4>[ 1864.738977] [<c13d35c1>] lock_sock_nested+0x58/0x68 <4>[ 1864.739411] [<c1493c33>] l2cap_sock_sendmsg+0x3e/0x76 <4>[ 1864.739858] [<c13d06c3>] __sock_sendmsg+0x50/0x59 <4>[ 1864.740279] [<c13d0ea2>] sock_sendmsg+0x94/0xa8 <4>[ 1864.740687] [<c13d0ede>] kernel_sendmsg+0x28/0x37 <4>[ 1864.741106] [<c14969ca>] rfcomm_send_frame+0x30/0x38 <4>[ 1864.741542] [<c1496a2a>] rfcomm_send_ua+0x58/0x5a <4>[ 1864.741959] [<c1498447>] rfcomm_run+0x441/0xb52 <4>[ 1864.742365] [<c104f095>] kthread+0x63/0x68 <4>[ 1864.742742] [<c14d5182>] kernel_thread_helper+0x6/0xd <4>[ 1864.743187] <4>[ 1864.743193] -> #0 (rfcomm_mutex){+.+.+.}: <4>[ 1864.743667] [<c1061ada>] __lock_acquire+0x988/0xc00 <4>[ 1864.744100] [<c1062273>] lock_acquire+0x104/0x140 <4>[ 1864.744519] [<c14d2c70>] __mutex_lock_common+0x3b/0x33f <4>[ 1864.744975] [<c14d303e>] mutex_lock_nested+0x2d/0x36 <4>[ 1864.745412] [<c14970ea>] rfcomm_dlc_close+0x15/0x30 <4>[ 1864.745842] [<c14990d9>] __rfcomm_sock_close+0x5f/0x6b <4>[ 1864.746288] [<c1499114>] rfcomm_sock_shutdown+0x2f/0x62 <4>[ 1864.746737] [<c13d275d>] sys_socketcall+0x1db/0x422 <4>[ 1864.747165] [<c14d42f0>] syscall_call+0x7/0xb Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-01-22 00:28:34 +02:00
Bluetooth: Fix locking in bt_accept_enqueue() for BH context With commit e16337622016 ("Bluetooth: Handle bt_accept_enqueue() socket atomically") lock_sock[_nested]() is used to acquire the socket lock before manipulating the socket. lock_sock[_nested]() may block, which is problematic since bt_accept_enqueue() can be called in bottom half context (e.g. from rfcomm_connect_ind()): [<ffffff80080d81ec>] __might_sleep+0x4c/0x80 [<ffffff800876c7b0>] lock_sock_nested+0x24/0x58 [<ffffff8000d7c27c>] bt_accept_enqueue+0x48/0xd4 [bluetooth] [<ffffff8000e67d8c>] rfcomm_connect_ind+0x190/0x218 [rfcomm] Add a parameter to bt_accept_enqueue() to indicate whether the function is called from BH context, and acquire the socket lock with bh_lock_sock_nested() if that's the case. Also adapt all callers of bt_accept_enqueue() to pass the new parameter: - l2cap_sock_new_connection_cb() - uses lock_sock() to lock the parent socket => process context - rfcomm_connect_ind() - acquires the parent socket lock with bh_lock_sock() => BH context - __sco_chan_add() - called from sco_chan_add(), which is called from sco_connect(). parent is NULL, hence bt_accept_enqueue() isn't called in this code path and we can ignore it - also called from sco_conn_ready(). uses bh_lock_sock() to acquire the parent lock => BH context Fixes: e16337622016 ("Bluetooth: Handle bt_accept_enqueue() socket atomically") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2019-01-02 16:11:20 -08:00
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00