linux/net/bridge/br_multicast.c

5236 lines
138 KiB

net: bridge: Maintain number of MDB entries in net_bridge_mcast_port The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. The per-port multicast context is used for tracking of MDB entries for the port as a whole. This is available for all bridges. The per-port-VLAN multicast context is then only available on VLAN-filtering bridges on VLANs that have multicast snooping on. With these changes in place, it will be possible to configure MDB limit for bridge as a whole, or any one port as a whole, or any single port-VLAN. Note that unlike the global limit, exhaustion of the per-port and per-port-VLAN maximums does not cause disablement of multicast snooping. It is also permitted to configure the local limit larger than hash_max, even though that is not useful. In this patch, introduce only the accounting for number of entries, and the max field itself, but not the means to toggle the max. The next patch introduces the netlink APIs to toggle and read the values. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:25 +01:00
net: bridge: mcast: use the correct vlan group helper When dereferencing the port vlan group we should use the rcu helper instead of the one relying on rtnl. In br_multicast_pg_to_port_ctx the entry cannot disappear as we hold the multicast lock and rcu as explained in the comment above it. For the same reason we're ok in br_multicast_start_querier. ============================= WARNING: suspicious RCU usage 5.14.0-rc5+ #429 Tainted: G W ----------------------------- net/bridge/br_private.h:1478 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by swapper/2/0: #0: ffff88822be85eb0 ((&p->timer)){+.-.}-{0:0}, at: call_timer_fn+0x5/0x2da #1: ffff88810b32f260 (&br->multicast_lock){+.-.}-{3:3}, at: br_multicast_port_group_expired+0x28/0x13d [bridge] #2: ffffffff824f6c80 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire.constprop.0+0x0/0x22 [bridge] stack backtrace: CPU: 2 PID: 0 Comm: swapper/2 Kdump: loaded Tainted: G W 5.14.0-rc5+ #429 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x45/0x59 nbp_vlan_group+0x3e/0x44 [bridge] br_multicast_pg_to_port_ctx+0xd6/0x10d [bridge] br_multicast_star_g_handle_mode+0xa1/0x2ce [bridge] ? netlink_broadcast+0xf/0x11 ? nlmsg_notify+0x56/0x99 ? br_mdb_notify+0x224/0x2e9 [bridge] ? br_multicast_del_pg+0x1dc/0x26d [bridge] br_multicast_del_pg+0x1dc/0x26d [bridge] br_multicast_port_group_expired+0xaa/0x13d [bridge] ? __grp_src_delete_marked.isra.0+0x35/0x35 [bridge] ? __grp_src_delete_marked.isra.0+0x35/0x35 [bridge] call_timer_fn+0x134/0x2da __run_timers+0x169/0x193 run_timer_softirq+0x19/0x2d __do_softirq+0x1bc/0x42a __irq_exit_rcu+0x5c/0xb3 irq_exit_rcu+0xa/0x12 sysvec_apic_timer_interrupt+0x5e/0x75 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0010:default_idle+0xc/0xd Code: e8 14 40 71 ff e8 10 b3 ff ff 4c 89 e2 48 89 ef 31 f6 5d 41 5c e9 a9 e8 c2 ff cc cc cc cc 0f 1f 44 00 00 e8 7f 55 65 ff fb f4 <c3> 0f 1f 44 00 00 55 65 48 8b 2c 25 40 6f 01 00 53 f0 80 4d 02 20 RSP: 0018:ffff88810033bf00 EFLAGS: 00000206 RAX: ffffffff819cf828 RBX: ffff888100328000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff819cfa2d RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: ffff8881008302c0 R11: 00000000000006db R12: 0000000000000000 R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x4/0x4 ? default_idle_call+0x15/0x7b default_idle_call+0x4d/0x7b do_idle+0x124/0x2a2 cpu_startup_entry+0x1d/0x1f secondary_startup_64_no_verify+0xb0/0xbb Fixes: 74edfd483de8 ("net: bridge: multicast: add helper to get port mcast context from port group") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16 17:57:06 +03:00
net: bridge: Maintain number of MDB entries in net_bridge_mcast_port The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. The per-port multicast context is used for tracking of MDB entries for the port as a whole. This is available for all bridges. The per-port-VLAN multicast context is then only available on VLAN-filtering bridges on VLANs that have multicast snooping on. With these changes in place, it will be possible to configure MDB limit for bridge as a whole, or any one port as a whole, or any single port-VLAN. Note that unlike the global limit, exhaustion of the per-port and per-port-VLAN maximums does not cause disablement of multicast snooping. It is also permitted to configure the local limit larger than hash_max, even though that is not useful. In this patch, introduce only the accounting for number of entries, and the max field itself, but not the means to toggle the max. The next patch introduces the netlink APIs to toggle and read the values. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:25 +01:00
net: bridge: mcast: always update mdb_n_entries for vlan contexts syzbot triggered a warning[1] about the number of mdb entries in a context. It turned out that there are multiple ways to trigger that warning today (some got added during the years), the root cause of the problem is that the increase is done conditionally, and over the years these different conditions increased so there were new ways to trigger the warning, that is to do a decrease which wasn't paired with a previous increase. For example one way to trigger it is with flush: $ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1 $ ip l add dumdum up master br0 type dummy $ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1 $ ip link set dev br0 down $ ip link set dev br0 type bridge mcast_vlan_snooping 1 ^^^^ this will enable snooping, but will not update mdb_n_entries because in __br_multicast_enable_port_ctx() we check !netif_running $ bridge mdb flush dev br0 ^^^ this will trigger the warning because it will delete the pg which we added above, which will try to decrease mdb_n_entries Fix the problem by removing the conditional increase and always keep the count up-to-date while the vlan exists. In order to do that we have to first initialize it on port-vlan context creation, and then always increase or decrease the value regardless of mcast options. To keep the current behaviour we have to enforce the mdb limit only if the context is port's or if the port-vlan's mcast snooping is enabled. [1] ------------[ cut here ]------------ n == 0 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825, CPU#0: syz.4.4607/22043 Modules linked in: CPU: 0 UID: 0 PID: 22043 Comm: syz.4.4607 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026 RIP: 0010:br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline] RIP: 0010:br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline] RIP: 0010:br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825 Code: 41 5f 5d e9 04 7a 48 f7 e8 3f 73 5c f7 90 0f 0b 90 e9 cf fd ff ff e8 31 73 5c f7 90 0f 0b 90 e9 16 fd ff ff e8 23 73 5c f7 90 <0f> 0b 90 e9 60 fd ff ff e8 15 73 5c f7 eb 05 e8 0e 73 5c f7 48 8b RSP: 0018:ffffc9000c207220 EFLAGS: 00010293 RAX: ffffffff8a68042d RBX: ffff88807c6f1800 RCX: ffff888066e90000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888066e90000 R09: 000000000000000c R10: 000000000000000c R11: 0000000000000000 R12: ffff8880303ef800 R13: dffffc0000000000 R14: ffff888050eb11c4 R15: 1ffff1100a1d6238 FS: 00007fa45921b6c0(0000) GS:ffff8881256f5000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4591f9ff8 CR3: 0000000081df2000 CR4: 00000000003526f0 Call Trace: <TASK> br_mdb_flush_pgs net/bridge/br_mdb.c:1525 [inline] br_mdb_flush net/bridge/br_mdb.c:1544 [inline] br_mdb_del_bulk+0x5e2/0xb20 net/bridge/br_mdb.c:1561 rtnl_mdb_del+0x48a/0x640 net/core/rtnetlink.c:-1 rtnetlink_rcv_msg+0x77e/0xbe0 net/core/rtnetlink.c:6967 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa68/0xad0 net/socket.c:2592 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2646 __sys_sendmsg net/socket.c:2678 [inline] __do_sys_sendmsg net/socket.c:2683 [inline] __se_sys_sendmsg net/socket.c:2681 [inline] __x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa45839aeb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fa45921b028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fa458615fa0 RCX: 00007fa45839aeb9 RDX: 0000000000000000 RSI: 00002000000000c0 RDI: 0000000000000004 RBP: 00007fa458408c1f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa458616038 R14: 00007fa458615fa0 R15: 00007fff0b59fae8 </TASK> Fixes: b57e8d870d52 ("net: bridge: Maintain number of MDB entries in net_bridge_mcast_port") Reported-by: syzbot+d5d1b7343531d17bd3c5@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/aYrWbRp83MQR1ife@debil/T/#t Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://patch.msgid.link/20260213070031.1400003-2-nikolay@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-13 09:00:30 +02:00
net: bridge: Maintain number of MDB entries in net_bridge_mcast_port The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. The per-port multicast context is used for tracking of MDB entries for the port as a whole. This is available for all bridges. The per-port-VLAN multicast context is then only available on VLAN-filtering bridges on VLANs that have multicast snooping on. With these changes in place, it will be possible to configure MDB limit for bridge as a whole, or any one port as a whole, or any single port-VLAN. Note that unlike the global limit, exhaustion of the per-port and per-port-VLAN maximums does not cause disablement of multicast snooping. It is also permitted to configure the local limit larger than hash_max, even though that is not useful. In this patch, introduce only the accounting for number of entries, and the max field itself, but not the means to toggle the max. The next patch introduces the netlink APIs to toggle and read the values. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:25 +01:00
bridge: mcast: Add a flag for user installed source entries There are a few places where the bridge driver differentiates between (S, G) entries installed by the kernel (in response to Membership Reports) and those installed by user space. One of them is when deleting an (S, G) entry corresponding to a source entry that is being deleted. While user space cannot currently add a source entry to a (*, G), it can add an (S, G) entry that later corresponds to a source entry created by the reception of a Membership Report. If this source entry is later deleted because its source timer expired or because the (*, G) entry is being deleted, the bridge driver will not delete the corresponding (S, G) entry if it was added by user space as permanent. This is going to be a problem when the ability to install a (*, G) with a source list is exposed to user space. In this case, when user space installs the (*, G) as permanent, then all the (S, G) entries corresponding to its source list will also be installed as permanent. When user space deletes the (*, G), all the source entries will be deleted and the expectation is that the corresponding (S, G) entries will be deleted as well. Solve this by introducing a new source entry flag denoting that the entry was installed by user space. When the entry is deleted, delete the corresponding (S, G) entry even if it was installed by user space as permanent, as the flag tells us that it was installed in response to the source entry being created. The flag will be set in a subsequent patch where source entries are created in response to user requests. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-10 16:56:26 +02:00
net: bridge: Maintain number of MDB entries in net_bridge_mcast_port The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. The per-port multicast context is used for tracking of MDB entries for the port as a whole. This is available for all bridges. The per-port-VLAN multicast context is then only available on VLAN-filtering bridges on VLANs that have multicast snooping on. With these changes in place, it will be possible to configure MDB limit for bridge as a whole, or any one port as a whole, or any single port-VLAN. Note that unlike the global limit, exhaustion of the per-port and per-port-VLAN maximums does not cause disablement of multicast snooping. It is also permitted to configure the local limit larger than hash_max, even though that is not useful. In this patch, introduce only the accounting for number of entries, and the max field itself, but not the means to toggle the max. The next patch introduces the netlink APIs to toggle and read the values. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:25 +01:00
net: bridge: mcast: always update mdb_n_entries for vlan contexts syzbot triggered a warning[1] about the number of mdb entries in a context. It turned out that there are multiple ways to trigger that warning today (some got added during the years), the root cause of the problem is that the increase is done conditionally, and over the years these different conditions increased so there were new ways to trigger the warning, that is to do a decrease which wasn't paired with a previous increase. For example one way to trigger it is with flush: $ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1 $ ip l add dumdum up master br0 type dummy $ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1 $ ip link set dev br0 down $ ip link set dev br0 type bridge mcast_vlan_snooping 1 ^^^^ this will enable snooping, but will not update mdb_n_entries because in __br_multicast_enable_port_ctx() we check !netif_running $ bridge mdb flush dev br0 ^^^ this will trigger the warning because it will delete the pg which we added above, which will try to decrease mdb_n_entries Fix the problem by removing the conditional increase and always keep the count up-to-date while the vlan exists. In order to do that we have to first initialize it on port-vlan context creation, and then always increase or decrease the value regardless of mcast options. To keep the current behaviour we have to enforce the mdb limit only if the context is port's or if the port-vlan's mcast snooping is enabled. [1] ------------[ cut here ]------------ n == 0 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825, CPU#0: syz.4.4607/22043 Modules linked in: CPU: 0 UID: 0 PID: 22043 Comm: syz.4.4607 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026 RIP: 0010:br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline] RIP: 0010:br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline] RIP: 0010:br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825 Code: 41 5f 5d e9 04 7a 48 f7 e8 3f 73 5c f7 90 0f 0b 90 e9 cf fd ff ff e8 31 73 5c f7 90 0f 0b 90 e9 16 fd ff ff e8 23 73 5c f7 90 <0f> 0b 90 e9 60 fd ff ff e8 15 73 5c f7 eb 05 e8 0e 73 5c f7 48 8b RSP: 0018:ffffc9000c207220 EFLAGS: 00010293 RAX: ffffffff8a68042d RBX: ffff88807c6f1800 RCX: ffff888066e90000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888066e90000 R09: 000000000000000c R10: 000000000000000c R11: 0000000000000000 R12: ffff8880303ef800 R13: dffffc0000000000 R14: ffff888050eb11c4 R15: 1ffff1100a1d6238 FS: 00007fa45921b6c0(0000) GS:ffff8881256f5000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4591f9ff8 CR3: 0000000081df2000 CR4: 00000000003526f0 Call Trace: <TASK> br_mdb_flush_pgs net/bridge/br_mdb.c:1525 [inline] br_mdb_flush net/bridge/br_mdb.c:1544 [inline] br_mdb_del_bulk+0x5e2/0xb20 net/bridge/br_mdb.c:1561 rtnl_mdb_del+0x48a/0x640 net/core/rtnetlink.c:-1 rtnetlink_rcv_msg+0x77e/0xbe0 net/core/rtnetlink.c:6967 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa68/0xad0 net/socket.c:2592 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2646 __sys_sendmsg net/socket.c:2678 [inline] __do_sys_sendmsg net/socket.c:2683 [inline] __se_sys_sendmsg net/socket.c:2681 [inline] __x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa45839aeb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fa45921b028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fa458615fa0 RCX: 00007fa45839aeb9 RDX: 0000000000000000 RSI: 00002000000000c0 RDI: 0000000000000004 RBP: 00007fa458408c1f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa458616038 R14: 00007fa458615fa0 R15: 00007fff0b59fae8 </TASK> Fixes: b57e8d870d52 ("net: bridge: Maintain number of MDB entries in net_bridge_mcast_port") Reported-by: syzbot+d5d1b7343531d17bd3c5@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/aYrWbRp83MQR1ife@debil/T/#t Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://patch.msgid.link/20260213070031.1400003-2-nikolay@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-13 09:00:30 +02:00
net: bridge: Maintain number of MDB entries in net_bridge_mcast_port The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. The per-port multicast context is used for tracking of MDB entries for the port as a whole. This is available for all bridges. The per-port-VLAN multicast context is then only available on VLAN-filtering bridges on VLANs that have multicast snooping on. With these changes in place, it will be possible to configure MDB limit for bridge as a whole, or any one port as a whole, or any single port-VLAN. Note that unlike the global limit, exhaustion of the per-port and per-port-VLAN maximums does not cause disablement of multicast snooping. It is also permitted to configure the local limit larger than hash_max, even though that is not useful. In this patch, introduce only the accounting for number of entries, and the max field itself, but not the means to toggle the max. The next patch introduces the netlink APIs to toggle and read the values. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:25 +01:00
net: bridge: mcast: always update mdb_n_entries for vlan contexts syzbot triggered a warning[1] about the number of mdb entries in a context. It turned out that there are multiple ways to trigger that warning today (some got added during the years), the root cause of the problem is that the increase is done conditionally, and over the years these different conditions increased so there were new ways to trigger the warning, that is to do a decrease which wasn't paired with a previous increase. For example one way to trigger it is with flush: $ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1 $ ip l add dumdum up master br0 type dummy $ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1 $ ip link set dev br0 down $ ip link set dev br0 type bridge mcast_vlan_snooping 1 ^^^^ this will enable snooping, but will not update mdb_n_entries because in __br_multicast_enable_port_ctx() we check !netif_running $ bridge mdb flush dev br0 ^^^ this will trigger the warning because it will delete the pg which we added above, which will try to decrease mdb_n_entries Fix the problem by removing the conditional increase and always keep the count up-to-date while the vlan exists. In order to do that we have to first initialize it on port-vlan context creation, and then always increase or decrease the value regardless of mcast options. To keep the current behaviour we have to enforce the mdb limit only if the context is port's or if the port-vlan's mcast snooping is enabled. [1] ------------[ cut here ]------------ n == 0 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825, CPU#0: syz.4.4607/22043 Modules linked in: CPU: 0 UID: 0 PID: 22043 Comm: syz.4.4607 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026 RIP: 0010:br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline] RIP: 0010:br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline] RIP: 0010:br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825 Code: 41 5f 5d e9 04 7a 48 f7 e8 3f 73 5c f7 90 0f 0b 90 e9 cf fd ff ff e8 31 73 5c f7 90 0f 0b 90 e9 16 fd ff ff e8 23 73 5c f7 90 <0f> 0b 90 e9 60 fd ff ff e8 15 73 5c f7 eb 05 e8 0e 73 5c f7 48 8b RSP: 0018:ffffc9000c207220 EFLAGS: 00010293 RAX: ffffffff8a68042d RBX: ffff88807c6f1800 RCX: ffff888066e90000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888066e90000 R09: 000000000000000c R10: 000000000000000c R11: 0000000000000000 R12: ffff8880303ef800 R13: dffffc0000000000 R14: ffff888050eb11c4 R15: 1ffff1100a1d6238 FS: 00007fa45921b6c0(0000) GS:ffff8881256f5000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4591f9ff8 CR3: 0000000081df2000 CR4: 00000000003526f0 Call Trace: <TASK> br_mdb_flush_pgs net/bridge/br_mdb.c:1525 [inline] br_mdb_flush net/bridge/br_mdb.c:1544 [inline] br_mdb_del_bulk+0x5e2/0xb20 net/bridge/br_mdb.c:1561 rtnl_mdb_del+0x48a/0x640 net/core/rtnetlink.c:-1 rtnetlink_rcv_msg+0x77e/0xbe0 net/core/rtnetlink.c:6967 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa68/0xad0 net/socket.c:2592 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2646 __sys_sendmsg net/socket.c:2678 [inline] __do_sys_sendmsg net/socket.c:2683 [inline] __se_sys_sendmsg net/socket.c:2681 [inline] __x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa45839aeb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fa45921b028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fa458615fa0 RCX: 00007fa45839aeb9 RDX: 0000000000000000 RSI: 00002000000000c0 RDI: 0000000000000004 RBP: 00007fa458408c1f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa458616038 R14: 00007fa458615fa0 R15: 00007fff0b59fae8 </TASK> Fixes: b57e8d870d52 ("net: bridge: Maintain number of MDB entries in net_bridge_mcast_port") Reported-by: syzbot+d5d1b7343531d17bd3c5@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/aYrWbRp83MQR1ife@debil/T/#t Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://patch.msgid.link/20260213070031.1400003-2-nikolay@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-13 09:00:30 +02:00
net: bridge: Maintain number of MDB entries in net_bridge_mcast_port The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. The per-port multicast context is used for tracking of MDB entries for the port as a whole. This is available for all bridges. The per-port-VLAN multicast context is then only available on VLAN-filtering bridges on VLANs that have multicast snooping on. With these changes in place, it will be possible to configure MDB limit for bridge as a whole, or any one port as a whole, or any single port-VLAN. Note that unlike the global limit, exhaustion of the per-port and per-port-VLAN maximums does not cause disablement of multicast snooping. It is also permitted to configure the local limit larger than hash_max, even though that is not useful. In this patch, introduce only the accounting for number of entries, and the max field itself, but not the means to toggle the max. The next patch introduces the netlink APIs to toggle and read the values. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:25 +01:00
net: bridge: Add netlink knobs for number / maximum MDB entries The previous patch added accounting for number of MDB entries per port and per port-VLAN, and the logic to verify that these values stay within configured bounds. However it didn't provide means to actually configure those bounds or read the occupancy. This patch does that. Two new netlink attributes are added for the MDB occupancy: IFLA_BRPORT_MCAST_N_GROUPS for the per-port occupancy and BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS for the per-port-VLAN occupancy. And another two for the maximum number of MDB entries: IFLA_BRPORT_MCAST_MAX_GROUPS for the per-port maximum, and BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS for the per-port-VLAN one. Note that the two new IFLA_BRPORT_ attributes prompt bumping of RTNL_SLAVE_MAX_TYPE to size the slave attribute tables large enough. The new attributes are used like this: # ip link add name br up type bridge vlan_filtering 1 mcast_snooping 1 \ mcast_vlan_snooping 1 mcast_querier 1 # ip link set dev v1 master br # bridge vlan add dev v1 vid 2 # bridge vlan set dev v1 vid 1 mcast_max_groups 1 # bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 1 # bridge mdb add dev br port v1 grp 230.1.2.4 temp vid 1 Error: bridge: Port-VLAN is already in 1 groups, and mcast_max_groups=1. # bridge link set dev v1 mcast_max_groups 1 # bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 2 Error: bridge: Port is already in 1 groups, and mcast_max_groups=1. # bridge -d link show 5: v1@v2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br [...] [...] mcast_n_groups 1 mcast_max_groups 1 # bridge -d vlan show port vlan-id br 1 PVID Egress Untagged state forwarding mcast_router 1 v1 1 PVID Egress Untagged [...] mcast_n_groups 1 mcast_max_groups 1 2 [...] mcast_n_groups 0 mcast_max_groups 0 Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:26 +01:00
net: bridge: Maintain number of MDB entries in net_bridge_mcast_port The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. The per-port multicast context is used for tracking of MDB entries for the port as a whole. This is available for all bridges. The per-port-VLAN multicast context is then only available on VLAN-filtering bridges on VLANs that have multicast snooping on. With these changes in place, it will be possible to configure MDB limit for bridge as a whole, or any one port as a whole, or any single port-VLAN. Note that unlike the global limit, exhaustion of the per-port and per-port-VLAN maximums does not cause disablement of multicast snooping. It is also permitted to configure the local limit larger than hash_max, even though that is not useful. In this patch, introduce only the accounting for number of entries, and the max field itself, but not the means to toggle the max. The next patch introduces the netlink APIs to toggle and read the values. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:25 +01:00
net: bridge: Maintain number of MDB entries in net_bridge_mcast_port The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. The per-port multicast context is used for tracking of MDB entries for the port as a whole. This is available for all bridges. The per-port-VLAN multicast context is then only available on VLAN-filtering bridges on VLANs that have multicast snooping on. With these changes in place, it will be possible to configure MDB limit for bridge as a whole, or any one port as a whole, or any single port-VLAN. Note that unlike the global limit, exhaustion of the per-port and per-port-VLAN maximums does not cause disablement of multicast snooping. It is also permitted to configure the local limit larger than hash_max, even though that is not useful. In this patch, introduce only the accounting for number of entries, and the max field itself, but not the means to toggle the max. The next patch introduces the netlink APIs to toggle and read the values. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:25 +01:00
net: bridge: Maintain number of MDB entries in net_bridge_mcast_port The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. The per-port multicast context is used for tracking of MDB entries for the port as a whole. This is available for all bridges. The per-port-VLAN multicast context is then only available on VLAN-filtering bridges on VLANs that have multicast snooping on. With these changes in place, it will be possible to configure MDB limit for bridge as a whole, or any one port as a whole, or any single port-VLAN. Note that unlike the global limit, exhaustion of the per-port and per-port-VLAN maximums does not cause disablement of multicast snooping. It is also permitted to configure the local limit larger than hash_max, even though that is not useful. In this patch, introduce only the accounting for number of entries, and the max field itself, but not the means to toggle the max. The next patch introduces the netlink APIs to toggle and read the values. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:25 +01:00
net: bridge: Maintain number of MDB entries in net_bridge_mcast_port The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. The per-port multicast context is used for tracking of MDB entries for the port as a whole. This is available for all bridges. The per-port-VLAN multicast context is then only available on VLAN-filtering bridges on VLANs that have multicast snooping on. With these changes in place, it will be possible to configure MDB limit for bridge as a whole, or any one port as a whole, or any single port-VLAN. Note that unlike the global limit, exhaustion of the per-port and per-port-VLAN maximums does not cause disablement of multicast snooping. It is also permitted to configure the local limit larger than hash_max, even though that is not useful. In this patch, introduce only the accounting for number of entries, and the max field itself, but not the means to toggle the max. The next patch introduces the netlink APIs to toggle and read the values. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:25 +01:00
net: bridge: Maintain number of MDB entries in net_bridge_mcast_port The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. The per-port multicast context is used for tracking of MDB entries for the port as a whole. This is available for all bridges. The per-port-VLAN multicast context is then only available on VLAN-filtering bridges on VLANs that have multicast snooping on. With these changes in place, it will be possible to configure MDB limit for bridge as a whole, or any one port as a whole, or any single port-VLAN. Note that unlike the global limit, exhaustion of the per-port and per-port-VLAN maximums does not cause disablement of multicast snooping. It is also permitted to configure the local limit larger than hash_max, even though that is not useful. In this patch, introduce only the accounting for number of entries, and the max field itself, but not the means to toggle the max. The next patch introduces the netlink APIs to toggle and read the values. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:25 +01:00
net: bridge: Maintain number of MDB entries in net_bridge_mcast_port The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. The per-port multicast context is used for tracking of MDB entries for the port as a whole. This is available for all bridges. The per-port-VLAN multicast context is then only available on VLAN-filtering bridges on VLANs that have multicast snooping on. With these changes in place, it will be possible to configure MDB limit for bridge as a whole, or any one port as a whole, or any single port-VLAN. Note that unlike the global limit, exhaustion of the per-port and per-port-VLAN maximums does not cause disablement of multicast snooping. It is also permitted to configure the local limit larger than hash_max, even though that is not useful. In this patch, introduce only the accounting for number of entries, and the max field itself, but not the means to toggle the max. The next patch introduces the netlink APIs to toggle and read the values. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:25 +01:00
net: bridge: Maintain number of MDB entries in net_bridge_mcast_port The MDB maintained by the bridge is limited. When the bridge is configured for IGMP / MLD snooping, a buggy or malicious client can easily exhaust its capacity. In SW datapath, the capacity is configurable through the IFLA_BR_MCAST_HASH_MAX parameter, but ultimately is finite. Obviously a similar limit exists in the HW datapath for purposes of offloading. In order to prevent the issue of unilateral exhaustion of MDB resources, introduce two parameters in each of two contexts: - Per-port and per-port-VLAN number of MDB entries that the port is member in. - Per-port and (when BROPT_MCAST_VLAN_SNOOPING_ENABLED is enabled) per-port-VLAN maximum permitted number of MDB entries, or 0 for no limit. The per-port multicast context is used for tracking of MDB entries for the port as a whole. This is available for all bridges. The per-port-VLAN multicast context is then only available on VLAN-filtering bridges on VLANs that have multicast snooping on. With these changes in place, it will be possible to configure MDB limit for bridge as a whole, or any one port as a whole, or any single port-VLAN. Note that unlike the global limit, exhaustion of the per-port and per-port-VLAN maximums does not cause disablement of multicast snooping. It is also permitted to configure the local limit larger than hash_max, even though that is not useful. In this patch, introduce only the accounting for number of entries, and the max field itself, but not the means to toggle the max. The next patch introduces the netlink APIs to toggle and read the values. Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02 18:59:25 +01:00
Revert "bridge: only expire the mdb entry when query is received" While this commit was a good attempt to fix issues occuring when no multicast querier is present, this commit still has two more issues: 1) There are cases where mdb entries do not expire even if there is a querier present. The bridge will unnecessarily continue flooding multicast packets on the according ports. 2) Never removing an mdb entry could be exploited for a Denial of Service by an attacker on the local link, slowly, but steadily eating up all memory. Actually, this commit became obsolete with "bridge: disable snooping if there is no querier" (b00589af3b) which included fixes for a few more cases. Therefore reverting the following commits (the commit stated in the commit message plus three of its follow up fixes): ==================== Revert "bridge: update mdb expiration timer upon reports." This reverts commit f144febd93d5ee534fdf23505ab091b2b9088edc. Revert "bridge: do not call setup_timer() multiple times" This reverts commit 1faabf2aab1fdaa1ace4e8c829d1b9cf7bfec2f1. Revert "bridge: fix some kernel warning in multicast timer" This reverts commit c7e8e8a8f7a70b343ca1e0f90a31e35ab2d16de1. Revert "bridge: only expire the mdb entry when query is received" This reverts commit 9f00b2e7cf241fa389733d41b615efdaa2cb0f5b. ==================== CC: Cong Wang <amwang@redhat.com> Signed-off-by: Linus Lüssing <linus.luessing@web.de> Reviewed-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-20 00:58:57 +02:00
Revert "bridge: only expire the mdb entry when query is received" While this commit was a good attempt to fix issues occuring when no multicast querier is present, this commit still has two more issues: 1) There are cases where mdb entries do not expire even if there is a querier present. The bridge will unnecessarily continue flooding multicast packets on the according ports. 2) Never removing an mdb entry could be exploited for a Denial of Service by an attacker on the local link, slowly, but steadily eating up all memory. Actually, this commit became obsolete with "bridge: disable snooping if there is no querier" (b00589af3b) which included fixes for a few more cases. Therefore reverting the following commits (the commit stated in the commit message plus three of its follow up fixes): ==================== Revert "bridge: update mdb expiration timer upon reports." This reverts commit f144febd93d5ee534fdf23505ab091b2b9088edc. Revert "bridge: do not call setup_timer() multiple times" This reverts commit 1faabf2aab1fdaa1ace4e8c829d1b9cf7bfec2f1. Revert "bridge: fix some kernel warning in multicast timer" This reverts commit c7e8e8a8f7a70b343ca1e0f90a31e35ab2d16de1. Revert "bridge: only expire the mdb entry when query is received" This reverts commit 9f00b2e7cf241fa389733d41b615efdaa2cb0f5b. ==================== CC: Cong Wang <amwang@redhat.com> Signed-off-by: Linus Lüssing <linus.luessing@web.de> Reviewed-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-20 00:58:57 +02:00
Revert "bridge: only expire the mdb entry when query is received" While this commit was a good attempt to fix issues occuring when no multicast querier is present, this commit still has two more issues: 1) There are cases where mdb entries do not expire even if there is a querier present. The bridge will unnecessarily continue flooding multicast packets on the according ports. 2) Never removing an mdb entry could be exploited for a Denial of Service by an attacker on the local link, slowly, but steadily eating up all memory. Actually, this commit became obsolete with "bridge: disable snooping if there is no querier" (b00589af3b) which included fixes for a few more cases. Therefore reverting the following commits (the commit stated in the commit message plus three of its follow up fixes): ==================== Revert "bridge: update mdb expiration timer upon reports." This reverts commit f144febd93d5ee534fdf23505ab091b2b9088edc. Revert "bridge: do not call setup_timer() multiple times" This reverts commit 1faabf2aab1fdaa1ace4e8c829d1b9cf7bfec2f1. Revert "bridge: fix some kernel warning in multicast timer" This reverts commit c7e8e8a8f7a70b343ca1e0f90a31e35ab2d16de1. Revert "bridge: only expire the mdb entry when query is received" This reverts commit 9f00b2e7cf241fa389733d41b615efdaa2cb0f5b. ==================== CC: Cong Wang <amwang@redhat.com> Signed-off-by: Linus Lüssing <linus.luessing@web.de> Reviewed-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-20 00:58:57 +02:00
bridge: mcast: fix disabled snooping after long uptime The original idea of the delay_time check was to not apply multicast snooping too early when an MLD querier appears. And to instead wait at least for MLD reports to arrive before switching from flooding to group based, MLD snooped forwarding, to avoid temporary packet loss. However in a batman-adv mesh network it was noticed that after 248 days of uptime 32bit MIPS based devices would start to signal that they had stopped applying multicast snooping due to missing queriers - even though they were the elected querier and still sending MLD queries themselves. While time_is_before_jiffies() generally is safe against jiffies wrap-arounds, like the code comments in jiffies.h explain, it won't be able to track a difference larger than ULONG_MAX/2. With a 32bit large jiffies and one jiffies tick every 10ms (CONFIG_HZ=100) on these MIPS devices running OpenWrt this would result in a difference larger than ULONG_MAX/2 after 248 (= 2^32/100/60/60/24/2) days and time_is_before_jiffies() would then start to return false instead of true. Leading to multicast snooping not being applied to multicast packets anymore. Fix this issue by using a proper timer_list object which won't have this ULONG_MAX/2 difference limitation. Fixes: b00589af3b04 ("bridge: disable snooping if there is no querier") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240127175033.9640-1-linus.luessing@c0d3.blue Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-27 18:50:32 +01:00
2015-09-15 20:04:16 -05:00
net: bridge: mcast: always update mdb_n_entries for vlan contexts syzbot triggered a warning[1] about the number of mdb entries in a context. It turned out that there are multiple ways to trigger that warning today (some got added during the years), the root cause of the problem is that the increase is done conditionally, and over the years these different conditions increased so there were new ways to trigger the warning, that is to do a decrease which wasn't paired with a previous increase. For example one way to trigger it is with flush: $ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1 $ ip l add dumdum up master br0 type dummy $ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1 $ ip link set dev br0 down $ ip link set dev br0 type bridge mcast_vlan_snooping 1 ^^^^ this will enable snooping, but will not update mdb_n_entries because in __br_multicast_enable_port_ctx() we check !netif_running $ bridge mdb flush dev br0 ^^^ this will trigger the warning because it will delete the pg which we added above, which will try to decrease mdb_n_entries Fix the problem by removing the conditional increase and always keep the count up-to-date while the vlan exists. In order to do that we have to first initialize it on port-vlan context creation, and then always increase or decrease the value regardless of mcast options. To keep the current behaviour we have to enforce the mdb limit only if the context is port's or if the port-vlan's mcast snooping is enabled. [1] ------------[ cut here ]------------ n == 0 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825, CPU#0: syz.4.4607/22043 Modules linked in: CPU: 0 UID: 0 PID: 22043 Comm: syz.4.4607 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026 RIP: 0010:br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline] RIP: 0010:br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline] RIP: 0010:br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825 Code: 41 5f 5d e9 04 7a 48 f7 e8 3f 73 5c f7 90 0f 0b 90 e9 cf fd ff ff e8 31 73 5c f7 90 0f 0b 90 e9 16 fd ff ff e8 23 73 5c f7 90 <0f> 0b 90 e9 60 fd ff ff e8 15 73 5c f7 eb 05 e8 0e 73 5c f7 48 8b RSP: 0018:ffffc9000c207220 EFLAGS: 00010293 RAX: ffffffff8a68042d RBX: ffff88807c6f1800 RCX: ffff888066e90000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888066e90000 R09: 000000000000000c R10: 000000000000000c R11: 0000000000000000 R12: ffff8880303ef800 R13: dffffc0000000000 R14: ffff888050eb11c4 R15: 1ffff1100a1d6238 FS: 00007fa45921b6c0(0000) GS:ffff8881256f5000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4591f9ff8 CR3: 0000000081df2000 CR4: 00000000003526f0 Call Trace: <TASK> br_mdb_flush_pgs net/bridge/br_mdb.c:1525 [inline] br_mdb_flush net/bridge/br_mdb.c:1544 [inline] br_mdb_del_bulk+0x5e2/0xb20 net/bridge/br_mdb.c:1561 rtnl_mdb_del+0x48a/0x640 net/core/rtnetlink.c:-1 rtnetlink_rcv_msg+0x77e/0xbe0 net/core/rtnetlink.c:6967 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa68/0xad0 net/socket.c:2592 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2646 __sys_sendmsg net/socket.c:2678 [inline] __do_sys_sendmsg net/socket.c:2683 [inline] __se_sys_sendmsg net/socket.c:2681 [inline] __x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa45839aeb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fa45921b028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fa458615fa0 RCX: 00007fa45839aeb9 RDX: 0000000000000000 RSI: 00002000000000c0 RDI: 0000000000000004 RBP: 00007fa458408c1f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fa458616038 R14: 00007fa458615fa0 R15: 00007fff0b59fae8 </TASK> Fixes: b57e8d870d52 ("net: bridge: Maintain number of MDB entries in net_bridge_mcast_port") Reported-by: syzbot+d5d1b7343531d17bd3c5@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/aYrWbRp83MQR1ife@debil/T/#t Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://patch.msgid.link/20260213070031.1400003-2-nikolay@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-02-13 09:00:30 +02:00
bridge: mcast: Fix use-after-free during router port configuration The bridge maintains a global list of ports behind which a multicast router resides. The list is consulted during forwarding to ensure multicast packets are forwarded to these ports even if the ports are not member in the matching MDB entry. When per-VLAN multicast snooping is enabled, the per-port multicast context is disabled on each port and the port is removed from the global router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 1 $ bridge -d mdb show | grep router However, the port can be re-added to the global list even when per-VLAN multicast snooping is enabled: # ip link set dev dummy1 type bridge_slave mcast_router 0 # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions"), when per-VLAN multicast snooping is enabled, multicast disablement on a port will disable the per-{port, VLAN} multicast contexts and not the per-port one. As a result, a port will remain in the global router port list even after it is deleted. This will lead to a use-after-free [1] when the list is traversed (when adding a new port to the list, for example): # ip link del dev dummy1 # ip link add name dummy2 up master br1 type dummy # ip link set dev dummy2 type bridge_slave mcast_router 2 Similarly, stale entries can also be found in the per-VLAN router port list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN} contexts are disabled on each port and the port is removed from the per-VLAN router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 # ip link add name dummy1 up master br1 type dummy # bridge vlan add vid 2 dev dummy1 # bridge vlan global set vid 2 dev br1 mcast_snooping 1 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 0 $ bridge vlan global show dev br1 vid 2 | grep router However, the port can be re-added to the per-VLAN list even when per-VLAN multicast snooping is disabled: # bridge vlan set vid 2 dev dummy1 mcast_router 0 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 When the VLAN is deleted from the port, the per-{port, VLAN} multicast context will not be disabled since multicast snooping is not enabled on the VLAN. As a result, the port will remain in the per-VLAN router port list even after it is no longer member in the VLAN. This will lead to a use-after-free [2] when the list is traversed (when adding a new port to the list, for example): # ip link add name dummy2 up master br1 type dummy # bridge vlan add vid 2 dev dummy2 # bridge vlan del vid 2 dev dummy1 # bridge vlan set vid 2 dev dummy2 mcast_router 2 Fix these issues by removing the port from the relevant (global or per-VLAN) router port list in br_multicast_port_ctx_deinit(). The function is invoked during port deletion with the per-port multicast context and during VLAN deletion with the per-{port, VLAN} multicast context. Note that deleting the multicast router timer is not enough as it only takes care of the temporary multicast router states (1 or 3) and not the permanent one (2). [1] BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560 Write of size 8 at addr ffff888004a67328 by task ip/384 [...] Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6f/0x350 print_report+0x108/0x205 kasan_report+0xdf/0x110 br_multicast_add_router.part.0+0x3f1/0x560 br_multicast_set_port_router+0x74e/0xac0 br_setport+0xa55/0x1870 br_port_slave_changelink+0x95/0x120 __rtnl_newlink+0x5e8/0xa40 rtnl_newlink+0x627/0xb00 rtnetlink_rcv_msg+0x6fb/0xb70 netlink_rcv_skb+0x11f/0x350 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x124/0x1c0 do_syscall_64+0xbb/0x360 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] BUG: KASAN: slab-use-after-free in br_multicast_add_router.part.0+0x378/0x560 Read of size 8 at addr ffff888009f00840 by task bridge/391 [...] Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6f/0x350 print_report+0x108/0x205 kasan_report+0xdf/0x110 br_multicast_add_router.part.0+0x378/0x560 br_multicast_set_port_router+0x6f9/0xac0 br_vlan_process_options+0x8b6/0x1430 br_vlan_rtm_process_one+0x605/0xa30 br_vlan_rtm_process+0x396/0x4c0 rtnetlink_rcv_msg+0x2f7/0xb70 netlink_rcv_skb+0x11f/0x350 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x124/0x1c0 do_syscall_64+0xbb/0x360 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: 2796d846d74a ("net: bridge: vlan: convert mcast router global option to per-vlan entry") Fixes: 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions") Reported-by: syzbot+7bfa4b72c6a5da128d32@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/684c18bd.a00a0220.279073.000b.GAE@google.com/T/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250619182228.1656906-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19 21:22:28 +03:00
bridge: mcast: Fix use-after-free during router port configuration The bridge maintains a global list of ports behind which a multicast router resides. The list is consulted during forwarding to ensure multicast packets are forwarded to these ports even if the ports are not member in the matching MDB entry. When per-VLAN multicast snooping is enabled, the per-port multicast context is disabled on each port and the port is removed from the global router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 1 $ bridge -d mdb show | grep router However, the port can be re-added to the global list even when per-VLAN multicast snooping is enabled: # ip link set dev dummy1 type bridge_slave mcast_router 0 # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions"), when per-VLAN multicast snooping is enabled, multicast disablement on a port will disable the per-{port, VLAN} multicast contexts and not the per-port one. As a result, a port will remain in the global router port list even after it is deleted. This will lead to a use-after-free [1] when the list is traversed (when adding a new port to the list, for example): # ip link del dev dummy1 # ip link add name dummy2 up master br1 type dummy # ip link set dev dummy2 type bridge_slave mcast_router 2 Similarly, stale entries can also be found in the per-VLAN router port list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN} contexts are disabled on each port and the port is removed from the per-VLAN router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 # ip link add name dummy1 up master br1 type dummy # bridge vlan add vid 2 dev dummy1 # bridge vlan global set vid 2 dev br1 mcast_snooping 1 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 0 $ bridge vlan global show dev br1 vid 2 | grep router However, the port can be re-added to the per-VLAN list even when per-VLAN multicast snooping is disabled: # bridge vlan set vid 2 dev dummy1 mcast_router 0 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 When the VLAN is deleted from the port, the per-{port, VLAN} multicast context will not be disabled since multicast snooping is not enabled on the VLAN. As a result, the port will remain in the per-VLAN router port list even after it is no longer member in the VLAN. This will lead to a use-after-free [2] when the list is traversed (when adding a new port to the list, for example): # ip link add name dummy2 up master br1 type dummy # bridge vlan add vid 2 dev dummy2 # bridge vlan del vid 2 dev dummy1 # bridge vlan set vid 2 dev dummy2 mcast_router 2 Fix these issues by removing the port from the relevant (global or per-VLAN) router port list in br_multicast_port_ctx_deinit(). The function is invoked during port deletion with the per-port multicast context and during VLAN deletion with the per-{port, VLAN} multicast context. Note that deleting the multicast router timer is not enough as it only takes care of the temporary multicast router states (1 or 3) and not the permanent one (2). [1] BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560 Write of size 8 at addr ffff888004a67328 by task ip/384 [...] Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6f/0x350 print_report+0x108/0x205 kasan_report+0xdf/0x110 br_multicast_add_router.part.0+0x3f1/0x560 br_multicast_set_port_router+0x74e/0xac0 br_setport+0xa55/0x1870 br_port_slave_changelink+0x95/0x120 __rtnl_newlink+0x5e8/0xa40 rtnl_newlink+0x627/0xb00 rtnetlink_rcv_msg+0x6fb/0xb70 netlink_rcv_skb+0x11f/0x350 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x124/0x1c0 do_syscall_64+0xbb/0x360 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] BUG: KASAN: slab-use-after-free in br_multicast_add_router.part.0+0x378/0x560 Read of size 8 at addr ffff888009f00840 by task bridge/391 [...] Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6f/0x350 print_report+0x108/0x205 kasan_report+0xdf/0x110 br_multicast_add_router.part.0+0x378/0x560 br_multicast_set_port_router+0x6f9/0xac0 br_vlan_process_options+0x8b6/0x1430 br_vlan_rtm_process_one+0x605/0xa30 br_vlan_rtm_process+0x396/0x4c0 rtnetlink_rcv_msg+0x2f7/0xb70 netlink_rcv_skb+0x11f/0x350 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x124/0x1c0 do_syscall_64+0xbb/0x360 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: 2796d846d74a ("net: bridge: vlan: convert mcast router global option to per-vlan entry") Fixes: 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions") Reported-by: syzbot+7bfa4b72c6a5da128d32@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/684c18bd.a00a0220.279073.000b.GAE@google.com/T/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250619182228.1656906-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19 21:22:28 +03:00
net: bridge: mcast: wait for previous gc cycles when removing port syzbot hit a use-after-free[1] which is caused because the bridge doesn't make sure that all previous garbage has been collected when removing a port. What happens is: CPU 1 CPU 2 start gc cycle remove port acquire gc lock first wait for lock call br_multicasg_gc() directly acquire lock now but free port the port can be freed while grp timers still running Make sure all previous gc cycles have finished by using flush_work before freeing the port. [1] BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699 CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers+0x74b/0xaf0 kernel/time/timer.c:2417 __run_timer_base kernel/time/timer.c:2428 [inline] __run_timer_base kernel/time/timer.c:2421 [inline] run_timer_base+0x111/0x190 kernel/time/timer.c:2437 Reported-by: syzbot+263426984509be19c9a0@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=263426984509be19c9a0 Fixes: e12cec65b554 ("net: bridge: mcast: destroy all entries via gc") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20240802080730.3206303-1-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-02 11:07:30 +03:00
bridge: multicast: restore perm router ports on multicast enable Satish reported a problem with the perm multicast router ports not getting reenabled after some series of events, in particular if it happens that the multicast snooping has been disabled and the port goes to disabled state then it will be deleted from the router port list, but if it moves into non-disabled state it will not be re-added because the mcast snooping is still disabled, and enabling snooping later does nothing. Here are the steps to reproduce, setup br0 with snooping enabled and eth1 added as a perm router (multicast_router = 2): 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show <empty> At this point we have mcast enabled and eth1 as a perm router (value = 2) but it is not in the router list which is incorrect. After this change: 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show router ports on br0: eth1 Note: we can directly do br_multicast_enable_port for all because the querier timer already has checks for the port state and will simply expire if it's in blocking/disabled. See the comment added by commit 9aa66382163e7 ("bridge: multicast: add a comment to br_port_state_selection about blocking state") Fixes: 561f1103a2b7 ("bridge: Add multicast_snooping sysfs toggle") Reported-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18 18:09:48 +02:00
bridge: multicast: restore perm router ports on multicast enable Satish reported a problem with the perm multicast router ports not getting reenabled after some series of events, in particular if it happens that the multicast snooping has been disabled and the port goes to disabled state then it will be deleted from the router port list, but if it moves into non-disabled state it will not be re-added because the mcast snooping is still disabled, and enabling snooping later does nothing. Here are the steps to reproduce, setup br0 with snooping enabled and eth1 added as a perm router (multicast_router = 2): 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show <empty> At this point we have mcast enabled and eth1 as a perm router (value = 2) but it is not in the router list which is incorrect. After this change: 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show router ports on br0: eth1 Note: we can directly do br_multicast_enable_port for all because the querier timer already has checks for the port state and will simply expire if it's in blocking/disabled. See the comment added by commit 9aa66382163e7 ("bridge: multicast: add a comment to br_port_state_selection about blocking state") Fixes: 561f1103a2b7 ("bridge: Add multicast_snooping sysfs toggle") Reported-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18 18:09:48 +02:00
net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions When a bridge port STP state is changed from BLOCKING/DISABLED to FORWARDING, the port's igmp query timer will NOT re-arm itself if the bridge has been configured as per-VLAN multicast snooping. Solve this by choosing the correct multicast context(s) to enable/disable port multicast based on whether per-VLAN multicast snooping is enabled or not, i.e. using per-{port, VLAN} context in case of per-VLAN multicast snooping by re-implementing br_multicast_enable_port() and br_multicast_disable_port() functions. Before the patch, the IGMP query does not happen in the last step of the following test sequence, i.e. no growth for tx counter: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 After the patch, the IGMP query happens in the last step of the test: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 3 Signed-off-by: Yong Wang <yongwang@nvidia.com> Reviewed-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-17 15:43:12 +02:00
bridge: multicast: restore perm router ports on multicast enable Satish reported a problem with the perm multicast router ports not getting reenabled after some series of events, in particular if it happens that the multicast snooping has been disabled and the port goes to disabled state then it will be deleted from the router port list, but if it moves into non-disabled state it will not be re-added because the mcast snooping is still disabled, and enabling snooping later does nothing. Here are the steps to reproduce, setup br0 with snooping enabled and eth1 added as a perm router (multicast_router = 2): 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show <empty> At this point we have mcast enabled and eth1 as a perm router (value = 2) but it is not in the router list which is incorrect. After this change: 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show router ports on br0: eth1 Note: we can directly do br_multicast_enable_port for all because the querier timer already has checks for the port state and will simply expire if it's in blocking/disabled. See the comment added by commit 9aa66382163e7 ("bridge: multicast: add a comment to br_port_state_selection about blocking state") Fixes: 561f1103a2b7 ("bridge: Add multicast_snooping sysfs toggle") Reported-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18 18:09:48 +02:00
net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions When a bridge port STP state is changed from BLOCKING/DISABLED to FORWARDING, the port's igmp query timer will NOT re-arm itself if the bridge has been configured as per-VLAN multicast snooping. Solve this by choosing the correct multicast context(s) to enable/disable port multicast based on whether per-VLAN multicast snooping is enabled or not, i.e. using per-{port, VLAN} context in case of per-VLAN multicast snooping by re-implementing br_multicast_enable_port() and br_multicast_disable_port() functions. Before the patch, the IGMP query does not happen in the last step of the following test sequence, i.e. no growth for tx counter: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 After the patch, the IGMP query happens in the last step of the test: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 3 Signed-off-by: Yong Wang <yongwang@nvidia.com> Reviewed-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-17 15:43:12 +02:00
bridge: multicast: restore perm router ports on multicast enable Satish reported a problem with the perm multicast router ports not getting reenabled after some series of events, in particular if it happens that the multicast snooping has been disabled and the port goes to disabled state then it will be deleted from the router port list, but if it moves into non-disabled state it will not be re-added because the mcast snooping is still disabled, and enabling snooping later does nothing. Here are the steps to reproduce, setup br0 with snooping enabled and eth1 added as a perm router (multicast_router = 2): 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show <empty> At this point we have mcast enabled and eth1 as a perm router (value = 2) but it is not in the router list which is incorrect. After this change: 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show router ports on br0: eth1 Note: we can directly do br_multicast_enable_port for all because the querier timer already has checks for the port state and will simply expire if it's in blocking/disabled. See the comment added by commit 9aa66382163e7 ("bridge: multicast: add a comment to br_port_state_selection about blocking state") Fixes: 561f1103a2b7 ("bridge: Add multicast_snooping sysfs toggle") Reported-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18 18:09:48 +02:00
net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions When a bridge port STP state is changed from BLOCKING/DISABLED to FORWARDING, the port's igmp query timer will NOT re-arm itself if the bridge has been configured as per-VLAN multicast snooping. Solve this by choosing the correct multicast context(s) to enable/disable port multicast based on whether per-VLAN multicast snooping is enabled or not, i.e. using per-{port, VLAN} context in case of per-VLAN multicast snooping by re-implementing br_multicast_enable_port() and br_multicast_disable_port() functions. Before the patch, the IGMP query does not happen in the last step of the following test sequence, i.e. no growth for tx counter: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 After the patch, the IGMP query happens in the last step of the test: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 3 Signed-off-by: Yong Wang <yongwang@nvidia.com> Reviewed-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-17 15:43:12 +02:00
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 17:06:00 -08:00
net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions When a bridge port STP state is changed from BLOCKING/DISABLED to FORWARDING, the port's igmp query timer will NOT re-arm itself if the bridge has been configured as per-VLAN multicast snooping. Solve this by choosing the correct multicast context(s) to enable/disable port multicast based on whether per-VLAN multicast snooping is enabled or not, i.e. using per-{port, VLAN} context in case of per-VLAN multicast snooping by re-implementing br_multicast_enable_port() and br_multicast_disable_port() functions. Before the patch, the IGMP query does not happen in the last step of the following test sequence, i.e. no growth for tx counter: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 After the patch, the IGMP query happens in the last step of the test: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 3 Signed-off-by: Yong Wang <yongwang@nvidia.com> Reviewed-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-17 15:43:12 +02:00
net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions When a bridge port STP state is changed from BLOCKING/DISABLED to FORWARDING, the port's igmp query timer will NOT re-arm itself if the bridge has been configured as per-VLAN multicast snooping. Solve this by choosing the correct multicast context(s) to enable/disable port multicast based on whether per-VLAN multicast snooping is enabled or not, i.e. using per-{port, VLAN} context in case of per-VLAN multicast snooping by re-implementing br_multicast_enable_port() and br_multicast_disable_port() functions. Before the patch, the IGMP query does not happen in the last step of the following test sequence, i.e. no growth for tx counter: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 After the patch, the IGMP query happens in the last step of the test: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 3 Signed-off-by: Yong Wang <yongwang@nvidia.com> Reviewed-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-17 15:43:12 +02:00
net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling We take a pointer to grec prior to calling pskb_may_pull and use it afterwards to get nsrcs so record nsrcs before the pull when handling igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling mld2 which again could lead to reading 2 bytes out-of-bounds. ================================================================== BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge] Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G OE 5.2.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 ? br_multicast_rcv+0x480c/0x4ad0 [bridge] __kasan_report+0x152/0x1aa ? br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_rcv+0x480c/0x4ad0 [bridge] kasan_report+0xe/0x20 br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_disable_port+0x150/0x150 [bridge] ? ktime_get_with_offset+0xb4/0x150 ? __kasan_kmalloc.constprop.6+0xa6/0xf0 ? __netif_receive_skb+0x1b0/0x1b0 ? br_fdb_update+0x10e/0x6e0 [bridge] ? br_handle_frame_finish+0x3c6/0x11d0 [bridge] br_handle_frame_finish+0x3c6/0x11d0 [bridge] ? br_pass_frame_up+0x3a0/0x3a0 [bridge] ? virtnet_probe+0x1c80/0x1c80 [virtio_net] br_handle_frame+0x731/0xd90 [bridge] ? select_idle_sibling+0x25/0x7d0 ? br_handle_frame_finish+0x11d0/0x11d0 [bridge] __netif_receive_skb_core+0xced/0x2d70 ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring] ? do_xdp_generic+0x20/0x20 ? virtqueue_napi_complete+0x39/0x70 [virtio_net] ? virtnet_poll+0x94d/0xc78 [virtio_net] ? receive_buf+0x5120/0x5120 [virtio_net] ? __netif_receive_skb_one_core+0x97/0x1d0 __netif_receive_skb_one_core+0x97/0x1d0 ? __netif_receive_skb_core+0x2d70/0x2d70 ? _raw_write_trylock+0x100/0x100 ? __queue_work+0x41e/0xbe0 process_backlog+0x19c/0x650 ? _raw_read_lock_irq+0x40/0x40 net_rx_action+0x71e/0xbc0 ? __switch_to_asm+0x40/0x70 ? napi_complete_done+0x360/0x360 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x85e/0x14d0 __do_softirq+0x1db/0x5f9 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x26/0x40 smpboot_thread_fn+0x443/0x680 ? sort_range+0x20/0x20 ? schedule+0x94/0x210 ? __kthread_parkme+0x78/0xf0 ? sort_range+0x20/0x20 kthread+0x2ae/0x3a0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0xffffc000000000() raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Fixes: bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Reported-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:00:18 +03:00
net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling We take a pointer to grec prior to calling pskb_may_pull and use it afterwards to get nsrcs so record nsrcs before the pull when handling igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling mld2 which again could lead to reading 2 bytes out-of-bounds. ================================================================== BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge] Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G OE 5.2.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 ? br_multicast_rcv+0x480c/0x4ad0 [bridge] __kasan_report+0x152/0x1aa ? br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_rcv+0x480c/0x4ad0 [bridge] kasan_report+0xe/0x20 br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_disable_port+0x150/0x150 [bridge] ? ktime_get_with_offset+0xb4/0x150 ? __kasan_kmalloc.constprop.6+0xa6/0xf0 ? __netif_receive_skb+0x1b0/0x1b0 ? br_fdb_update+0x10e/0x6e0 [bridge] ? br_handle_frame_finish+0x3c6/0x11d0 [bridge] br_handle_frame_finish+0x3c6/0x11d0 [bridge] ? br_pass_frame_up+0x3a0/0x3a0 [bridge] ? virtnet_probe+0x1c80/0x1c80 [virtio_net] br_handle_frame+0x731/0xd90 [bridge] ? select_idle_sibling+0x25/0x7d0 ? br_handle_frame_finish+0x11d0/0x11d0 [bridge] __netif_receive_skb_core+0xced/0x2d70 ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring] ? do_xdp_generic+0x20/0x20 ? virtqueue_napi_complete+0x39/0x70 [virtio_net] ? virtnet_poll+0x94d/0xc78 [virtio_net] ? receive_buf+0x5120/0x5120 [virtio_net] ? __netif_receive_skb_one_core+0x97/0x1d0 __netif_receive_skb_one_core+0x97/0x1d0 ? __netif_receive_skb_core+0x2d70/0x2d70 ? _raw_write_trylock+0x100/0x100 ? __queue_work+0x41e/0xbe0 process_backlog+0x19c/0x650 ? _raw_read_lock_irq+0x40/0x40 net_rx_action+0x71e/0xbc0 ? __switch_to_asm+0x40/0x70 ? napi_complete_done+0x360/0x360 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x85e/0x14d0 __do_softirq+0x1db/0x5f9 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x26/0x40 smpboot_thread_fn+0x443/0x680 ? sort_range+0x20/0x20 ? schedule+0x94/0x210 ? __kthread_parkme+0x78/0xf0 ? sort_range+0x20/0x20 kthread+0x2ae/0x3a0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0xffffc000000000() raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Fixes: bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Reported-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:00:18 +03:00
net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling We take a pointer to grec prior to calling pskb_may_pull and use it afterwards to get nsrcs so record nsrcs before the pull when handling igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling mld2 which again could lead to reading 2 bytes out-of-bounds. ================================================================== BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge] Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G OE 5.2.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 ? br_multicast_rcv+0x480c/0x4ad0 [bridge] __kasan_report+0x152/0x1aa ? br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_rcv+0x480c/0x4ad0 [bridge] kasan_report+0xe/0x20 br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_disable_port+0x150/0x150 [bridge] ? ktime_get_with_offset+0xb4/0x150 ? __kasan_kmalloc.constprop.6+0xa6/0xf0 ? __netif_receive_skb+0x1b0/0x1b0 ? br_fdb_update+0x10e/0x6e0 [bridge] ? br_handle_frame_finish+0x3c6/0x11d0 [bridge] br_handle_frame_finish+0x3c6/0x11d0 [bridge] ? br_pass_frame_up+0x3a0/0x3a0 [bridge] ? virtnet_probe+0x1c80/0x1c80 [virtio_net] br_handle_frame+0x731/0xd90 [bridge] ? select_idle_sibling+0x25/0x7d0 ? br_handle_frame_finish+0x11d0/0x11d0 [bridge] __netif_receive_skb_core+0xced/0x2d70 ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring] ? do_xdp_generic+0x20/0x20 ? virtqueue_napi_complete+0x39/0x70 [virtio_net] ? virtnet_poll+0x94d/0xc78 [virtio_net] ? receive_buf+0x5120/0x5120 [virtio_net] ? __netif_receive_skb_one_core+0x97/0x1d0 __netif_receive_skb_one_core+0x97/0x1d0 ? __netif_receive_skb_core+0x2d70/0x2d70 ? _raw_write_trylock+0x100/0x100 ? __queue_work+0x41e/0xbe0 process_backlog+0x19c/0x650 ? _raw_read_lock_irq+0x40/0x40 net_rx_action+0x71e/0xbc0 ? __switch_to_asm+0x40/0x70 ? napi_complete_done+0x360/0x360 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x85e/0x14d0 __do_softirq+0x1db/0x5f9 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x26/0x40 smpboot_thread_fn+0x443/0x680 ? sort_range+0x20/0x20 ? schedule+0x94/0x210 ? __kthread_parkme+0x78/0xf0 ? sort_range+0x20/0x20 kthread+0x2ae/0x3a0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0xffffc000000000() raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Fixes: bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Reported-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:00:18 +03:00
net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling We take a pointer to grec prior to calling pskb_may_pull and use it afterwards to get nsrcs so record nsrcs before the pull when handling igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling mld2 which again could lead to reading 2 bytes out-of-bounds. ================================================================== BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge] Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G OE 5.2.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 ? br_multicast_rcv+0x480c/0x4ad0 [bridge] __kasan_report+0x152/0x1aa ? br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_rcv+0x480c/0x4ad0 [bridge] kasan_report+0xe/0x20 br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_disable_port+0x150/0x150 [bridge] ? ktime_get_with_offset+0xb4/0x150 ? __kasan_kmalloc.constprop.6+0xa6/0xf0 ? __netif_receive_skb+0x1b0/0x1b0 ? br_fdb_update+0x10e/0x6e0 [bridge] ? br_handle_frame_finish+0x3c6/0x11d0 [bridge] br_handle_frame_finish+0x3c6/0x11d0 [bridge] ? br_pass_frame_up+0x3a0/0x3a0 [bridge] ? virtnet_probe+0x1c80/0x1c80 [virtio_net] br_handle_frame+0x731/0xd90 [bridge] ? select_idle_sibling+0x25/0x7d0 ? br_handle_frame_finish+0x11d0/0x11d0 [bridge] __netif_receive_skb_core+0xced/0x2d70 ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring] ? do_xdp_generic+0x20/0x20 ? virtqueue_napi_complete+0x39/0x70 [virtio_net] ? virtnet_poll+0x94d/0xc78 [virtio_net] ? receive_buf+0x5120/0x5120 [virtio_net] ? __netif_receive_skb_one_core+0x97/0x1d0 __netif_receive_skb_one_core+0x97/0x1d0 ? __netif_receive_skb_core+0x2d70/0x2d70 ? _raw_write_trylock+0x100/0x100 ? __queue_work+0x41e/0xbe0 process_backlog+0x19c/0x650 ? _raw_read_lock_irq+0x40/0x40 net_rx_action+0x71e/0xbc0 ? __switch_to_asm+0x40/0x70 ? napi_complete_done+0x360/0x360 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x85e/0x14d0 __do_softirq+0x1db/0x5f9 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x26/0x40 smpboot_thread_fn+0x443/0x680 ? sort_range+0x20/0x20 ? schedule+0x94/0x210 ? __kthread_parkme+0x78/0xf0 ? sort_range+0x20/0x20 kthread+0x2ae/0x3a0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0xffffc000000000() raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Fixes: bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Reported-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:00:18 +03:00
net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling We take a pointer to grec prior to calling pskb_may_pull and use it afterwards to get nsrcs so record nsrcs before the pull when handling igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling mld2 which again could lead to reading 2 bytes out-of-bounds. ================================================================== BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge] Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G OE 5.2.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 ? br_multicast_rcv+0x480c/0x4ad0 [bridge] __kasan_report+0x152/0x1aa ? br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_rcv+0x480c/0x4ad0 [bridge] kasan_report+0xe/0x20 br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_disable_port+0x150/0x150 [bridge] ? ktime_get_with_offset+0xb4/0x150 ? __kasan_kmalloc.constprop.6+0xa6/0xf0 ? __netif_receive_skb+0x1b0/0x1b0 ? br_fdb_update+0x10e/0x6e0 [bridge] ? br_handle_frame_finish+0x3c6/0x11d0 [bridge] br_handle_frame_finish+0x3c6/0x11d0 [bridge] ? br_pass_frame_up+0x3a0/0x3a0 [bridge] ? virtnet_probe+0x1c80/0x1c80 [virtio_net] br_handle_frame+0x731/0xd90 [bridge] ? select_idle_sibling+0x25/0x7d0 ? br_handle_frame_finish+0x11d0/0x11d0 [bridge] __netif_receive_skb_core+0xced/0x2d70 ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring] ? do_xdp_generic+0x20/0x20 ? virtqueue_napi_complete+0x39/0x70 [virtio_net] ? virtnet_poll+0x94d/0xc78 [virtio_net] ? receive_buf+0x5120/0x5120 [virtio_net] ? __netif_receive_skb_one_core+0x97/0x1d0 __netif_receive_skb_one_core+0x97/0x1d0 ? __netif_receive_skb_core+0x2d70/0x2d70 ? _raw_write_trylock+0x100/0x100 ? __queue_work+0x41e/0xbe0 process_backlog+0x19c/0x650 ? _raw_read_lock_irq+0x40/0x40 net_rx_action+0x71e/0xbc0 ? __switch_to_asm+0x40/0x70 ? napi_complete_done+0x360/0x360 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x85e/0x14d0 __do_softirq+0x1db/0x5f9 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x26/0x40 smpboot_thread_fn+0x443/0x680 ? sort_range+0x20/0x20 ? schedule+0x94/0x210 ? __kthread_parkme+0x78/0xf0 ? sort_range+0x20/0x20 kthread+0x2ae/0x3a0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0xffffc000000000() raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Fixes: bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Reported-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:00:18 +03:00
net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling We take a pointer to grec prior to calling pskb_may_pull and use it afterwards to get nsrcs so record nsrcs before the pull when handling igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling mld2 which again could lead to reading 2 bytes out-of-bounds. ================================================================== BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge] Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G OE 5.2.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 ? br_multicast_rcv+0x480c/0x4ad0 [bridge] __kasan_report+0x152/0x1aa ? br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_rcv+0x480c/0x4ad0 [bridge] kasan_report+0xe/0x20 br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_disable_port+0x150/0x150 [bridge] ? ktime_get_with_offset+0xb4/0x150 ? __kasan_kmalloc.constprop.6+0xa6/0xf0 ? __netif_receive_skb+0x1b0/0x1b0 ? br_fdb_update+0x10e/0x6e0 [bridge] ? br_handle_frame_finish+0x3c6/0x11d0 [bridge] br_handle_frame_finish+0x3c6/0x11d0 [bridge] ? br_pass_frame_up+0x3a0/0x3a0 [bridge] ? virtnet_probe+0x1c80/0x1c80 [virtio_net] br_handle_frame+0x731/0xd90 [bridge] ? select_idle_sibling+0x25/0x7d0 ? br_handle_frame_finish+0x11d0/0x11d0 [bridge] __netif_receive_skb_core+0xced/0x2d70 ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring] ? do_xdp_generic+0x20/0x20 ? virtqueue_napi_complete+0x39/0x70 [virtio_net] ? virtnet_poll+0x94d/0xc78 [virtio_net] ? receive_buf+0x5120/0x5120 [virtio_net] ? __netif_receive_skb_one_core+0x97/0x1d0 __netif_receive_skb_one_core+0x97/0x1d0 ? __netif_receive_skb_core+0x2d70/0x2d70 ? _raw_write_trylock+0x100/0x100 ? __queue_work+0x41e/0xbe0 process_backlog+0x19c/0x650 ? _raw_read_lock_irq+0x40/0x40 net_rx_action+0x71e/0xbc0 ? __switch_to_asm+0x40/0x70 ? napi_complete_done+0x360/0x360 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x85e/0x14d0 __do_softirq+0x1db/0x5f9 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x26/0x40 smpboot_thread_fn+0x443/0x680 ? sort_range+0x20/0x20 ? schedule+0x94/0x210 ? __kthread_parkme+0x78/0xf0 ? sort_range+0x20/0x20 kthread+0x2ae/0x3a0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0xffffc000000000() raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Fixes: bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Reported-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:00:18 +03:00
net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling We take a pointer to grec prior to calling pskb_may_pull and use it afterwards to get nsrcs so record nsrcs before the pull when handling igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling mld2 which again could lead to reading 2 bytes out-of-bounds. ================================================================== BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge] Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G OE 5.2.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 ? br_multicast_rcv+0x480c/0x4ad0 [bridge] __kasan_report+0x152/0x1aa ? br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_rcv+0x480c/0x4ad0 [bridge] kasan_report+0xe/0x20 br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_disable_port+0x150/0x150 [bridge] ? ktime_get_with_offset+0xb4/0x150 ? __kasan_kmalloc.constprop.6+0xa6/0xf0 ? __netif_receive_skb+0x1b0/0x1b0 ? br_fdb_update+0x10e/0x6e0 [bridge] ? br_handle_frame_finish+0x3c6/0x11d0 [bridge] br_handle_frame_finish+0x3c6/0x11d0 [bridge] ? br_pass_frame_up+0x3a0/0x3a0 [bridge] ? virtnet_probe+0x1c80/0x1c80 [virtio_net] br_handle_frame+0x731/0xd90 [bridge] ? select_idle_sibling+0x25/0x7d0 ? br_handle_frame_finish+0x11d0/0x11d0 [bridge] __netif_receive_skb_core+0xced/0x2d70 ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring] ? do_xdp_generic+0x20/0x20 ? virtqueue_napi_complete+0x39/0x70 [virtio_net] ? virtnet_poll+0x94d/0xc78 [virtio_net] ? receive_buf+0x5120/0x5120 [virtio_net] ? __netif_receive_skb_one_core+0x97/0x1d0 __netif_receive_skb_one_core+0x97/0x1d0 ? __netif_receive_skb_core+0x2d70/0x2d70 ? _raw_write_trylock+0x100/0x100 ? __queue_work+0x41e/0xbe0 process_backlog+0x19c/0x650 ? _raw_read_lock_irq+0x40/0x40 net_rx_action+0x71e/0xbc0 ? __switch_to_asm+0x40/0x70 ? napi_complete_done+0x360/0x360 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x85e/0x14d0 __do_softirq+0x1db/0x5f9 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x26/0x40 smpboot_thread_fn+0x443/0x680 ? sort_range+0x20/0x20 ? schedule+0x94/0x210 ? __kthread_parkme+0x78/0xf0 ? sort_range+0x20/0x20 kthread+0x2ae/0x3a0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0xffffc000000000() raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Fixes: bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Reported-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:00:18 +03:00
bridge: mcast: fix disabled snooping after long uptime The original idea of the delay_time check was to not apply multicast snooping too early when an MLD querier appears. And to instead wait at least for MLD reports to arrive before switching from flooding to group based, MLD snooped forwarding, to avoid temporary packet loss. However in a batman-adv mesh network it was noticed that after 248 days of uptime 32bit MIPS based devices would start to signal that they had stopped applying multicast snooping due to missing queriers - even though they were the elected querier and still sending MLD queries themselves. While time_is_before_jiffies() generally is safe against jiffies wrap-arounds, like the code comments in jiffies.h explain, it won't be able to track a difference larger than ULONG_MAX/2. With a 32bit large jiffies and one jiffies tick every 10ms (CONFIG_HZ=100) on these MIPS devices running OpenWrt this would result in a difference larger than ULONG_MAX/2 after 248 (= 2^32/100/60/60/24/2) days and time_is_before_jiffies() would then start to return false instead of true. Leading to multicast snooping not being applied to multicast packets anymore. Fix this issue by using a proper timer_list object which won't have this ULONG_MAX/2 difference limitation. Fixes: b00589af3b04 ("bridge: disable snooping if there is no querier") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240127175033.9640-1-linus.luessing@c0d3.blue Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-27 18:50:32 +01:00
Revert "bridge: only expire the mdb entry when query is received" While this commit was a good attempt to fix issues occuring when no multicast querier is present, this commit still has two more issues: 1) There are cases where mdb entries do not expire even if there is a querier present. The bridge will unnecessarily continue flooding multicast packets on the according ports. 2) Never removing an mdb entry could be exploited for a Denial of Service by an attacker on the local link, slowly, but steadily eating up all memory. Actually, this commit became obsolete with "bridge: disable snooping if there is no querier" (b00589af3b) which included fixes for a few more cases. Therefore reverting the following commits (the commit stated in the commit message plus three of its follow up fixes): ==================== Revert "bridge: update mdb expiration timer upon reports." This reverts commit f144febd93d5ee534fdf23505ab091b2b9088edc. Revert "bridge: do not call setup_timer() multiple times" This reverts commit 1faabf2aab1fdaa1ace4e8c829d1b9cf7bfec2f1. Revert "bridge: fix some kernel warning in multicast timer" This reverts commit c7e8e8a8f7a70b343ca1e0f90a31e35ab2d16de1. Revert "bridge: only expire the mdb entry when query is received" This reverts commit 9f00b2e7cf241fa389733d41b615efdaa2cb0f5b. ==================== CC: Cong Wang <amwang@redhat.com> Signed-off-by: Linus Lüssing <linus.luessing@web.de> Reviewed-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-20 00:58:57 +02:00
Revert "bridge: only expire the mdb entry when query is received" While this commit was a good attempt to fix issues occuring when no multicast querier is present, this commit still has two more issues: 1) There are cases where mdb entries do not expire even if there is a querier present. The bridge will unnecessarily continue flooding multicast packets on the according ports. 2) Never removing an mdb entry could be exploited for a Denial of Service by an attacker on the local link, slowly, but steadily eating up all memory. Actually, this commit became obsolete with "bridge: disable snooping if there is no querier" (b00589af3b) which included fixes for a few more cases. Therefore reverting the following commits (the commit stated in the commit message plus three of its follow up fixes): ==================== Revert "bridge: update mdb expiration timer upon reports." This reverts commit f144febd93d5ee534fdf23505ab091b2b9088edc. Revert "bridge: do not call setup_timer() multiple times" This reverts commit 1faabf2aab1fdaa1ace4e8c829d1b9cf7bfec2f1. Revert "bridge: fix some kernel warning in multicast timer" This reverts commit c7e8e8a8f7a70b343ca1e0f90a31e35ab2d16de1. Revert "bridge: only expire the mdb entry when query is received" This reverts commit 9f00b2e7cf241fa389733d41b615efdaa2cb0f5b. ==================== CC: Cong Wang <amwang@redhat.com> Signed-off-by: Linus Lüssing <linus.luessing@web.de> Reviewed-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-20 00:58:57 +02:00
Revert "bridge: only expire the mdb entry when query is received" While this commit was a good attempt to fix issues occuring when no multicast querier is present, this commit still has two more issues: 1) There are cases where mdb entries do not expire even if there is a querier present. The bridge will unnecessarily continue flooding multicast packets on the according ports. 2) Never removing an mdb entry could be exploited for a Denial of Service by an attacker on the local link, slowly, but steadily eating up all memory. Actually, this commit became obsolete with "bridge: disable snooping if there is no querier" (b00589af3b) which included fixes for a few more cases. Therefore reverting the following commits (the commit stated in the commit message plus three of its follow up fixes): ==================== Revert "bridge: update mdb expiration timer upon reports." This reverts commit f144febd93d5ee534fdf23505ab091b2b9088edc. Revert "bridge: do not call setup_timer() multiple times" This reverts commit 1faabf2aab1fdaa1ace4e8c829d1b9cf7bfec2f1. Revert "bridge: fix some kernel warning in multicast timer" This reverts commit c7e8e8a8f7a70b343ca1e0f90a31e35ab2d16de1. Revert "bridge: only expire the mdb entry when query is received" This reverts commit 9f00b2e7cf241fa389733d41b615efdaa2cb0f5b. ==================== CC: Cong Wang <amwang@redhat.com> Signed-off-by: Linus Lüssing <linus.luessing@web.de> Reviewed-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-20 00:58:57 +02:00
Revert "bridge: only expire the mdb entry when query is received" While this commit was a good attempt to fix issues occuring when no multicast querier is present, this commit still has two more issues: 1) There are cases where mdb entries do not expire even if there is a querier present. The bridge will unnecessarily continue flooding multicast packets on the according ports. 2) Never removing an mdb entry could be exploited for a Denial of Service by an attacker on the local link, slowly, but steadily eating up all memory. Actually, this commit became obsolete with "bridge: disable snooping if there is no querier" (b00589af3b) which included fixes for a few more cases. Therefore reverting the following commits (the commit stated in the commit message plus three of its follow up fixes): ==================== Revert "bridge: update mdb expiration timer upon reports." This reverts commit f144febd93d5ee534fdf23505ab091b2b9088edc. Revert "bridge: do not call setup_timer() multiple times" This reverts commit 1faabf2aab1fdaa1ace4e8c829d1b9cf7bfec2f1. Revert "bridge: fix some kernel warning in multicast timer" This reverts commit c7e8e8a8f7a70b343ca1e0f90a31e35ab2d16de1. Revert "bridge: only expire the mdb entry when query is received" This reverts commit 9f00b2e7cf241fa389733d41b615efdaa2cb0f5b. ==================== CC: Cong Wang <amwang@redhat.com> Signed-off-by: Linus Lüssing <linus.luessing@web.de> Reviewed-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-20 00:58:57 +02:00
net: bridge: mcast: fix broken length + header check for MRDv6 Adv. The IPv6 Multicast Router Advertisements parsing has the following two issues: For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes, assuming MLDv2 Reports with at least one multicast address entry). When ipv6_mc_check_mld_msg() tries to parse an Multicast Router Advertisement its MLD length check will fail - and it will wrongly return -EINVAL, even if we have a valid MRD Advertisement. With the returned -EINVAL the bridge code will assume a broken packet and will wrongly discard it, potentially leading to multicast packet loss towards multicast routers. The second issue is the MRD header parsing in br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header immediately after the IPv6 header (IPv6 next header type). However according to RFC4286, section 2 all MRD messages contain a Router Alert option (just like MLD). So instead there is an IPv6 Hop-by-Hop option for the Router Alert between the IPv6 and ICMPv6 header, again leading to the bridge wrongly discarding Multicast Router Advertisements. To fix these two issues, introduce a new return value -ENODATA to ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop option which is not an MLD but potentially an MRD packet. This also simplifies further parsing in the bridge code, as ipv6_mc_check_mld() already fully checks the ICMPv6 header and hop-by-hop option. These issues were found and fixed with the help of the mrdisc tool (https://github.com/troglobit/mrdisc). Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25 17:27:35 +02:00
net: bridge: mcast: fix broken length + header check for MRDv6 Adv. The IPv6 Multicast Router Advertisements parsing has the following two issues: For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes, assuming MLDv2 Reports with at least one multicast address entry). When ipv6_mc_check_mld_msg() tries to parse an Multicast Router Advertisement its MLD length check will fail - and it will wrongly return -EINVAL, even if we have a valid MRD Advertisement. With the returned -EINVAL the bridge code will assume a broken packet and will wrongly discard it, potentially leading to multicast packet loss towards multicast routers. The second issue is the MRD header parsing in br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header immediately after the IPv6 header (IPv6 next header type). However according to RFC4286, section 2 all MRD messages contain a Router Alert option (just like MLD). So instead there is an IPv6 Hop-by-Hop option for the Router Alert between the IPv6 and ICMPv6 header, again leading to the bridge wrongly discarding Multicast Router Advertisements. To fix these two issues, introduce a new return value -ENODATA to ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop option which is not an MLD but potentially an MRD packet. This also simplifies further parsing in the bridge code, as ipv6_mc_check_mld() already fully checks the ICMPv6 header and hop-by-hop option. These issues were found and fixed with the help of the mrdisc tool (https://github.com/troglobit/mrdisc). Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25 17:27:35 +02:00
net: bridge: mcast: fix broken length + header check for MRDv6 Adv. The IPv6 Multicast Router Advertisements parsing has the following two issues: For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes, assuming MLDv2 Reports with at least one multicast address entry). When ipv6_mc_check_mld_msg() tries to parse an Multicast Router Advertisement its MLD length check will fail - and it will wrongly return -EINVAL, even if we have a valid MRD Advertisement. With the returned -EINVAL the bridge code will assume a broken packet and will wrongly discard it, potentially leading to multicast packet loss towards multicast routers. The second issue is the MRD header parsing in br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header immediately after the IPv6 header (IPv6 next header type). However according to RFC4286, section 2 all MRD messages contain a Router Alert option (just like MLD). So instead there is an IPv6 Hop-by-Hop option for the Router Alert between the IPv6 and ICMPv6 header, again leading to the bridge wrongly discarding Multicast Router Advertisements. To fix these two issues, introduce a new return value -ENODATA to ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop option which is not an MLD but potentially an MRD packet. This also simplifies further parsing in the bridge code, as ipv6_mc_check_mld() already fully checks the ICMPv6 header and hop-by-hop option. These issues were found and fixed with the help of the mrdisc tool (https://github.com/troglobit/mrdisc). Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25 17:27:35 +02:00
net: bridge: mcast: fix broken length + header check for MRDv6 Adv. The IPv6 Multicast Router Advertisements parsing has the following two issues: For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes, assuming MLDv2 Reports with at least one multicast address entry). When ipv6_mc_check_mld_msg() tries to parse an Multicast Router Advertisement its MLD length check will fail - and it will wrongly return -EINVAL, even if we have a valid MRD Advertisement. With the returned -EINVAL the bridge code will assume a broken packet and will wrongly discard it, potentially leading to multicast packet loss towards multicast routers. The second issue is the MRD header parsing in br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header immediately after the IPv6 header (IPv6 next header type). However according to RFC4286, section 2 all MRD messages contain a Router Alert option (just like MLD). So instead there is an IPv6 Hop-by-Hop option for the Router Alert between the IPv6 and ICMPv6 header, again leading to the bridge wrongly discarding Multicast Router Advertisements. To fix these two issues, introduce a new return value -ENODATA to ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop option which is not an MLD but potentially an MRD packet. This also simplifies further parsing in the bridge code, as ipv6_mc_check_mld() already fully checks the ICMPv6 header and hop-by-hop option. These issues were found and fixed with the help of the mrdisc tool (https://github.com/troglobit/mrdisc). Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25 17:27:35 +02:00
bridge: mcast: fix disabled snooping after long uptime The original idea of the delay_time check was to not apply multicast snooping too early when an MLD querier appears. And to instead wait at least for MLD reports to arrive before switching from flooding to group based, MLD snooped forwarding, to avoid temporary packet loss. However in a batman-adv mesh network it was noticed that after 248 days of uptime 32bit MIPS based devices would start to signal that they had stopped applying multicast snooping due to missing queriers - even though they were the elected querier and still sending MLD queries themselves. While time_is_before_jiffies() generally is safe against jiffies wrap-arounds, like the code comments in jiffies.h explain, it won't be able to track a difference larger than ULONG_MAX/2. With a 32bit large jiffies and one jiffies tick every 10ms (CONFIG_HZ=100) on these MIPS devices running OpenWrt this would result in a difference larger than ULONG_MAX/2 after 248 (= 2^32/100/60/60/24/2) days and time_is_before_jiffies() would then start to return false instead of true. Leading to multicast snooping not being applied to multicast packets anymore. Fix this issue by using a proper timer_list object which won't have this ULONG_MAX/2 difference limitation. Fixes: b00589af3b04 ("bridge: disable snooping if there is no querier") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240127175033.9640-1-linus.luessing@c0d3.blue Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-27 18:50:32 +01:00
bridge: mcast: fix disabled snooping after long uptime The original idea of the delay_time check was to not apply multicast snooping too early when an MLD querier appears. And to instead wait at least for MLD reports to arrive before switching from flooding to group based, MLD snooped forwarding, to avoid temporary packet loss. However in a batman-adv mesh network it was noticed that after 248 days of uptime 32bit MIPS based devices would start to signal that they had stopped applying multicast snooping due to missing queriers - even though they were the elected querier and still sending MLD queries themselves. While time_is_before_jiffies() generally is safe against jiffies wrap-arounds, like the code comments in jiffies.h explain, it won't be able to track a difference larger than ULONG_MAX/2. With a 32bit large jiffies and one jiffies tick every 10ms (CONFIG_HZ=100) on these MIPS devices running OpenWrt this would result in a difference larger than ULONG_MAX/2 after 248 (= 2^32/100/60/60/24/2) days and time_is_before_jiffies() would then start to return false instead of true. Leading to multicast snooping not being applied to multicast packets anymore. Fix this issue by using a proper timer_list object which won't have this ULONG_MAX/2 difference limitation. Fixes: b00589af3b04 ("bridge: disable snooping if there is no querier") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240127175033.9640-1-linus.luessing@c0d3.blue Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-27 18:50:32 +01:00
net: Fix ip_mc_{dec,inc}_group allocation context After 4effd28c1245 ("bridge: join all-snoopers multicast address"), I started seeing the following sleep in atomic warnings: [ 26.763893] BUG: sleeping function called from invalid context at mm/slab.h:421 [ 26.771425] in_atomic(): 1, irqs_disabled(): 0, pid: 1658, name: sh [ 26.777855] INFO: lockdep is turned off. [ 26.781916] CPU: 0 PID: 1658 Comm: sh Not tainted 5.0.0-rc4 #20 [ 26.787943] Hardware name: BCM97278SV (DT) [ 26.792118] Call trace: [ 26.794645] dump_backtrace+0x0/0x170 [ 26.798391] show_stack+0x24/0x30 [ 26.801787] dump_stack+0xa4/0xe4 [ 26.805182] ___might_sleep+0x208/0x218 [ 26.809102] __might_sleep+0x78/0x88 [ 26.812762] kmem_cache_alloc_trace+0x64/0x28c [ 26.817301] igmp_group_dropped+0x150/0x230 [ 26.821573] ip_mc_dec_group+0x1b0/0x1f8 [ 26.825585] br_ip4_multicast_leave_snoopers.isra.11+0x174/0x190 [ 26.831704] br_multicast_toggle+0x78/0xcc [ 26.835887] store_bridge_parm+0xc4/0xfc [ 26.839894] multicast_snooping_store+0x3c/0x4c [ 26.844517] dev_attr_store+0x44/0x5c [ 26.848262] sysfs_kf_write+0x50/0x68 [ 26.852006] kernfs_fop_write+0x14c/0x1b4 [ 26.856102] __vfs_write+0x60/0x190 [ 26.859668] vfs_write+0xc8/0x168 [ 26.863059] ksys_write+0x70/0xc8 [ 26.866449] __arm64_sys_write+0x24/0x30 [ 26.870458] el0_svc_common+0xa0/0x11c [ 26.874291] el0_svc_handler+0x38/0x70 [ 26.878120] el0_svc+0x8/0xc while toggling the bridge's multicast_snooping attribute dynamically. Pass a gfp_t down to igmpv3_add_delrec(), introduce __igmp_group_dropped() and introduce __ip_mc_dec_group() to take a gfp_t argument. Similarly introduce ____ip_mc_inc_group() and __ip_mc_inc_group() to allow caller to specify gfp_t. IPv6 part of the patch appears fine. Fixes: 4effd28c1245 ("bridge: join all-snoopers multicast address") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 20:20:52 -08:00
bridge: Fix a deadlock when enabling multicast snooping When enabling multicast snooping, bridge module deadlocks on multicast_lock if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2 network. The deadlock was caused by the following sequence: While holding the lock, br_multicast_open calls br_multicast_join_snoopers, which eventually causes IP stack to (attempt to) send out a Listener Report (in igmp6_join_group). Since the destination Ethernet address is a multicast address, br_dev_xmit feeds the packet back to the bridge via br_multicast_rcv, which in turn calls br_multicast_add_group, which then deadlocks on multicast_lock. The fix is to move the call br_multicast_join_snoopers outside of the critical section. This works since br_multicast_join_snoopers only deals with IP and does not modify any multicast data structures of the bridge, so there's no need to hold the lock. Steps to reproduce: 1. sysctl net.ipv6.conf.all.force_mld_version=1 2. have another querier 3. ip link set dev bridge type bridge mcast_snooping 0 && \ ip link set dev bridge type bridge mcast_snooping 1 < deadlock > A typical call trace looks like the following: [ 936.251495] _raw_spin_lock+0x5c/0x68 [ 936.255221] br_multicast_add_group+0x40/0x170 [bridge] [ 936.260491] br_multicast_rcv+0x7ac/0xe30 [bridge] [ 936.265322] br_dev_xmit+0x140/0x368 [bridge] [ 936.269689] dev_hard_start_xmit+0x94/0x158 [ 936.273876] __dev_queue_xmit+0x5ac/0x7f8 [ 936.277890] dev_queue_xmit+0x10/0x18 [ 936.281563] neigh_resolve_output+0xec/0x198 [ 936.285845] ip6_finish_output2+0x240/0x710 [ 936.290039] __ip6_finish_output+0x130/0x170 [ 936.294318] ip6_output+0x6c/0x1c8 [ 936.297731] NF_HOOK.constprop.0+0xd8/0xe8 [ 936.301834] igmp6_send+0x358/0x558 [ 936.305326] igmp6_join_group.part.0+0x30/0xf0 [ 936.309774] igmp6_group_added+0xfc/0x110 [ 936.313787] __ipv6_dev_mc_inc+0x1a4/0x290 [ 936.317885] ipv6_dev_mc_inc+0x10/0x18 [ 936.321677] br_multicast_open+0xbc/0x110 [bridge] [ 936.326506] br_multicast_toggle+0xec/0x140 [bridge] Fixes: 4effd28c1245 ("bridge: join all-snoopers multicast address") Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 18:56:28 -05:00
net: Fix ip_mc_{dec,inc}_group allocation context After 4effd28c1245 ("bridge: join all-snoopers multicast address"), I started seeing the following sleep in atomic warnings: [ 26.763893] BUG: sleeping function called from invalid context at mm/slab.h:421 [ 26.771425] in_atomic(): 1, irqs_disabled(): 0, pid: 1658, name: sh [ 26.777855] INFO: lockdep is turned off. [ 26.781916] CPU: 0 PID: 1658 Comm: sh Not tainted 5.0.0-rc4 #20 [ 26.787943] Hardware name: BCM97278SV (DT) [ 26.792118] Call trace: [ 26.794645] dump_backtrace+0x0/0x170 [ 26.798391] show_stack+0x24/0x30 [ 26.801787] dump_stack+0xa4/0xe4 [ 26.805182] ___might_sleep+0x208/0x218 [ 26.809102] __might_sleep+0x78/0x88 [ 26.812762] kmem_cache_alloc_trace+0x64/0x28c [ 26.817301] igmp_group_dropped+0x150/0x230 [ 26.821573] ip_mc_dec_group+0x1b0/0x1f8 [ 26.825585] br_ip4_multicast_leave_snoopers.isra.11+0x174/0x190 [ 26.831704] br_multicast_toggle+0x78/0xcc [ 26.835887] store_bridge_parm+0xc4/0xfc [ 26.839894] multicast_snooping_store+0x3c/0x4c [ 26.844517] dev_attr_store+0x44/0x5c [ 26.848262] sysfs_kf_write+0x50/0x68 [ 26.852006] kernfs_fop_write+0x14c/0x1b4 [ 26.856102] __vfs_write+0x60/0x190 [ 26.859668] vfs_write+0xc8/0x168 [ 26.863059] ksys_write+0x70/0xc8 [ 26.866449] __arm64_sys_write+0x24/0x30 [ 26.870458] el0_svc_common+0xa0/0x11c [ 26.874291] el0_svc_handler+0x38/0x70 [ 26.878120] el0_svc+0x8/0xc while toggling the bridge's multicast_snooping attribute dynamically. Pass a gfp_t down to igmpv3_add_delrec(), introduce __igmp_group_dropped() and introduce __ip_mc_dec_group() to take a gfp_t argument. Similarly introduce ____ip_mc_inc_group() and __ip_mc_inc_group() to allow caller to specify gfp_t. IPv6 part of the patch appears fine. Fixes: 4effd28c1245 ("bridge: join all-snoopers multicast address") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01 20:20:52 -08:00
bridge: Fix a deadlock when enabling multicast snooping When enabling multicast snooping, bridge module deadlocks on multicast_lock if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2 network. The deadlock was caused by the following sequence: While holding the lock, br_multicast_open calls br_multicast_join_snoopers, which eventually causes IP stack to (attempt to) send out a Listener Report (in igmp6_join_group). Since the destination Ethernet address is a multicast address, br_dev_xmit feeds the packet back to the bridge via br_multicast_rcv, which in turn calls br_multicast_add_group, which then deadlocks on multicast_lock. The fix is to move the call br_multicast_join_snoopers outside of the critical section. This works since br_multicast_join_snoopers only deals with IP and does not modify any multicast data structures of the bridge, so there's no need to hold the lock. Steps to reproduce: 1. sysctl net.ipv6.conf.all.force_mld_version=1 2. have another querier 3. ip link set dev bridge type bridge mcast_snooping 0 && \ ip link set dev bridge type bridge mcast_snooping 1 < deadlock > A typical call trace looks like the following: [ 936.251495] _raw_spin_lock+0x5c/0x68 [ 936.255221] br_multicast_add_group+0x40/0x170 [bridge] [ 936.260491] br_multicast_rcv+0x7ac/0xe30 [bridge] [ 936.265322] br_dev_xmit+0x140/0x368 [bridge] [ 936.269689] dev_hard_start_xmit+0x94/0x158 [ 936.273876] __dev_queue_xmit+0x5ac/0x7f8 [ 936.277890] dev_queue_xmit+0x10/0x18 [ 936.281563] neigh_resolve_output+0xec/0x198 [ 936.285845] ip6_finish_output2+0x240/0x710 [ 936.290039] __ip6_finish_output+0x130/0x170 [ 936.294318] ip6_output+0x6c/0x1c8 [ 936.297731] NF_HOOK.constprop.0+0xd8/0xe8 [ 936.301834] igmp6_send+0x358/0x558 [ 936.305326] igmp6_join_group.part.0+0x30/0xf0 [ 936.309774] igmp6_group_added+0xfc/0x110 [ 936.313787] __ipv6_dev_mc_inc+0x1a4/0x290 [ 936.317885] ipv6_dev_mc_inc+0x10/0x18 [ 936.321677] br_multicast_open+0xbc/0x110 [bridge] [ 936.326506] br_multicast_toggle+0xec/0x140 [bridge] Fixes: 4effd28c1245 ("bridge: join all-snoopers multicast address") Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 18:56:28 -05:00
net: bridge: mcast: update multicast contex when vlan state is changed When the vlan STP state is changed, which could be manipulated by "bridge vlan" commands, similar to port STP state, this also impacts multicast behaviors such as igmp query. In the scenario of per-VLAN snooping, there's a need to update the corresponding multicast context to re-arm the port query timer when vlan state becomes "forwarding" etc. Update br_vlan_set_state() function to enable vlan multicast context in such scenario. Before the patch, the IGMP query does not happen in the last step of the following test sequence, i.e. no growth for tx counter: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # sleep 1 # bridge vlan set vid 1 dev swp1 state 4 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge vlan set vid 1 dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 After the patch, the IGMP query happens in the last step of the test: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # sleep 1 # bridge vlan set vid 1 dev swp1 state 4 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge vlan set vid 1 dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 3 Signed-off-by: Yong Wang <yongwang@nvidia.com> Reviewed-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-17 15:43:13 +02:00
net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions When a bridge port STP state is changed from BLOCKING/DISABLED to FORWARDING, the port's igmp query timer will NOT re-arm itself if the bridge has been configured as per-VLAN multicast snooping. Solve this by choosing the correct multicast context(s) to enable/disable port multicast based on whether per-VLAN multicast snooping is enabled or not, i.e. using per-{port, VLAN} context in case of per-VLAN multicast snooping by re-implementing br_multicast_enable_port() and br_multicast_disable_port() functions. Before the patch, the IGMP query does not happen in the last step of the following test sequence, i.e. no growth for tx counter: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 After the patch, the IGMP query happens in the last step of the test: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 3 Signed-off-by: Yong Wang <yongwang@nvidia.com> Reviewed-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-17 15:43:12 +02:00
net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions When a bridge port STP state is changed from BLOCKING/DISABLED to FORWARDING, the port's igmp query timer will NOT re-arm itself if the bridge has been configured as per-VLAN multicast snooping. Solve this by choosing the correct multicast context(s) to enable/disable port multicast based on whether per-VLAN multicast snooping is enabled or not, i.e. using per-{port, VLAN} context in case of per-VLAN multicast snooping by re-implementing br_multicast_enable_port() and br_multicast_disable_port() functions. Before the patch, the IGMP query does not happen in the last step of the following test sequence, i.e. no growth for tx counter: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 After the patch, the IGMP query happens in the last step of the test: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 3 Signed-off-by: Yong Wang <yongwang@nvidia.com> Reviewed-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-17 15:43:12 +02:00
net: bridge: mcast: use the correct vlan group helper When dereferencing the port vlan group we should use the rcu helper instead of the one relying on rtnl. In br_multicast_pg_to_port_ctx the entry cannot disappear as we hold the multicast lock and rcu as explained in the comment above it. For the same reason we're ok in br_multicast_start_querier. ============================= WARNING: suspicious RCU usage 5.14.0-rc5+ #429 Tainted: G W ----------------------------- net/bridge/br_private.h:1478 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by swapper/2/0: #0: ffff88822be85eb0 ((&p->timer)){+.-.}-{0:0}, at: call_timer_fn+0x5/0x2da #1: ffff88810b32f260 (&br->multicast_lock){+.-.}-{3:3}, at: br_multicast_port_group_expired+0x28/0x13d [bridge] #2: ffffffff824f6c80 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire.constprop.0+0x0/0x22 [bridge] stack backtrace: CPU: 2 PID: 0 Comm: swapper/2 Kdump: loaded Tainted: G W 5.14.0-rc5+ #429 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x45/0x59 nbp_vlan_group+0x3e/0x44 [bridge] br_multicast_pg_to_port_ctx+0xd6/0x10d [bridge] br_multicast_star_g_handle_mode+0xa1/0x2ce [bridge] ? netlink_broadcast+0xf/0x11 ? nlmsg_notify+0x56/0x99 ? br_mdb_notify+0x224/0x2e9 [bridge] ? br_multicast_del_pg+0x1dc/0x26d [bridge] br_multicast_del_pg+0x1dc/0x26d [bridge] br_multicast_port_group_expired+0xaa/0x13d [bridge] ? __grp_src_delete_marked.isra.0+0x35/0x35 [bridge] ? __grp_src_delete_marked.isra.0+0x35/0x35 [bridge] call_timer_fn+0x134/0x2da __run_timers+0x169/0x193 run_timer_softirq+0x19/0x2d __do_softirq+0x1bc/0x42a __irq_exit_rcu+0x5c/0xb3 irq_exit_rcu+0xa/0x12 sysvec_apic_timer_interrupt+0x5e/0x75 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0010:default_idle+0xc/0xd Code: e8 14 40 71 ff e8 10 b3 ff ff 4c 89 e2 48 89 ef 31 f6 5d 41 5c e9 a9 e8 c2 ff cc cc cc cc 0f 1f 44 00 00 e8 7f 55 65 ff fb f4 <c3> 0f 1f 44 00 00 55 65 48 8b 2c 25 40 6f 01 00 53 f0 80 4d 02 20 RSP: 0018:ffff88810033bf00 EFLAGS: 00000206 RAX: ffffffff819cf828 RBX: ffff888100328000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff819cfa2d RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: ffff8881008302c0 R11: 00000000000006db R12: 0000000000000000 R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x4/0x4 ? default_idle_call+0x15/0x7b default_idle_call+0x4d/0x7b do_idle+0x124/0x2a2 cpu_startup_entry+0x1d/0x1f secondary_startup_64_no_verify+0xb0/0xbb Fixes: 74edfd483de8 ("net: bridge: multicast: add helper to get port mcast context from port group") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16 17:57:06 +03:00
bridge: multicast: restore perm router ports on multicast enable Satish reported a problem with the perm multicast router ports not getting reenabled after some series of events, in particular if it happens that the multicast snooping has been disabled and the port goes to disabled state then it will be deleted from the router port list, but if it moves into non-disabled state it will not be re-added because the mcast snooping is still disabled, and enabling snooping later does nothing. Here are the steps to reproduce, setup br0 with snooping enabled and eth1 added as a perm router (multicast_router = 2): 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show <empty> At this point we have mcast enabled and eth1 as a perm router (value = 2) but it is not in the router list which is incorrect. After this change: 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show router ports on br0: eth1 Note: we can directly do br_multicast_enable_port for all because the querier timer already has checks for the port state and will simply expire if it's in blocking/disabled. See the comment added by commit 9aa66382163e7 ("bridge: multicast: add a comment to br_port_state_selection about blocking state") Fixes: 561f1103a2b7 ("bridge: Add multicast_snooping sysfs toggle") Reported-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18 18:09:48 +02:00
bridge: Fix a deadlock when enabling multicast snooping When enabling multicast snooping, bridge module deadlocks on multicast_lock if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2 network. The deadlock was caused by the following sequence: While holding the lock, br_multicast_open calls br_multicast_join_snoopers, which eventually causes IP stack to (attempt to) send out a Listener Report (in igmp6_join_group). Since the destination Ethernet address is a multicast address, br_dev_xmit feeds the packet back to the bridge via br_multicast_rcv, which in turn calls br_multicast_add_group, which then deadlocks on multicast_lock. The fix is to move the call br_multicast_join_snoopers outside of the critical section. This works since br_multicast_join_snoopers only deals with IP and does not modify any multicast data structures of the bridge, so there's no need to hold the lock. Steps to reproduce: 1. sysctl net.ipv6.conf.all.force_mld_version=1 2. have another querier 3. ip link set dev bridge type bridge mcast_snooping 0 && \ ip link set dev bridge type bridge mcast_snooping 1 < deadlock > A typical call trace looks like the following: [ 936.251495] _raw_spin_lock+0x5c/0x68 [ 936.255221] br_multicast_add_group+0x40/0x170 [bridge] [ 936.260491] br_multicast_rcv+0x7ac/0xe30 [bridge] [ 936.265322] br_dev_xmit+0x140/0x368 [bridge] [ 936.269689] dev_hard_start_xmit+0x94/0x158 [ 936.273876] __dev_queue_xmit+0x5ac/0x7f8 [ 936.277890] dev_queue_xmit+0x10/0x18 [ 936.281563] neigh_resolve_output+0xec/0x198 [ 936.285845] ip6_finish_output2+0x240/0x710 [ 936.290039] __ip6_finish_output+0x130/0x170 [ 936.294318] ip6_output+0x6c/0x1c8 [ 936.297731] NF_HOOK.constprop.0+0xd8/0xe8 [ 936.301834] igmp6_send+0x358/0x558 [ 936.305326] igmp6_join_group.part.0+0x30/0xf0 [ 936.309774] igmp6_group_added+0xfc/0x110 [ 936.313787] __ipv6_dev_mc_inc+0x1a4/0x290 [ 936.317885] ipv6_dev_mc_inc+0x10/0x18 [ 936.321677] br_multicast_open+0xbc/0x110 [bridge] [ 936.326506] br_multicast_toggle+0xec/0x140 [bridge] Fixes: 4effd28c1245 ("bridge: join all-snoopers multicast address") Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 18:56:28 -05:00
bridge: Fix a deadlock when enabling multicast snooping When enabling multicast snooping, bridge module deadlocks on multicast_lock if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2 network. The deadlock was caused by the following sequence: While holding the lock, br_multicast_open calls br_multicast_join_snoopers, which eventually causes IP stack to (attempt to) send out a Listener Report (in igmp6_join_group). Since the destination Ethernet address is a multicast address, br_dev_xmit feeds the packet back to the bridge via br_multicast_rcv, which in turn calls br_multicast_add_group, which then deadlocks on multicast_lock. The fix is to move the call br_multicast_join_snoopers outside of the critical section. This works since br_multicast_join_snoopers only deals with IP and does not modify any multicast data structures of the bridge, so there's no need to hold the lock. Steps to reproduce: 1. sysctl net.ipv6.conf.all.force_mld_version=1 2. have another querier 3. ip link set dev bridge type bridge mcast_snooping 0 && \ ip link set dev bridge type bridge mcast_snooping 1 < deadlock > A typical call trace looks like the following: [ 936.251495] _raw_spin_lock+0x5c/0x68 [ 936.255221] br_multicast_add_group+0x40/0x170 [bridge] [ 936.260491] br_multicast_rcv+0x7ac/0xe30 [bridge] [ 936.265322] br_dev_xmit+0x140/0x368 [bridge] [ 936.269689] dev_hard_start_xmit+0x94/0x158 [ 936.273876] __dev_queue_xmit+0x5ac/0x7f8 [ 936.277890] dev_queue_xmit+0x10/0x18 [ 936.281563] neigh_resolve_output+0xec/0x198 [ 936.285845] ip6_finish_output2+0x240/0x710 [ 936.290039] __ip6_finish_output+0x130/0x170 [ 936.294318] ip6_output+0x6c/0x1c8 [ 936.297731] NF_HOOK.constprop.0+0xd8/0xe8 [ 936.301834] igmp6_send+0x358/0x558 [ 936.305326] igmp6_join_group.part.0+0x30/0xf0 [ 936.309774] igmp6_group_added+0xfc/0x110 [ 936.313787] __ipv6_dev_mc_inc+0x1a4/0x290 [ 936.317885] ipv6_dev_mc_inc+0x10/0x18 [ 936.321677] br_multicast_open+0xbc/0x110 [bridge] [ 936.326506] br_multicast_toggle+0xec/0x140 [bridge] Fixes: 4effd28c1245 ("bridge: join all-snoopers multicast address") Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 18:56:28 -05:00
bridge: multicast: restore perm router ports on multicast enable Satish reported a problem with the perm multicast router ports not getting reenabled after some series of events, in particular if it happens that the multicast snooping has been disabled and the port goes to disabled state then it will be deleted from the router port list, but if it moves into non-disabled state it will not be re-added because the mcast snooping is still disabled, and enabling snooping later does nothing. Here are the steps to reproduce, setup br0 with snooping enabled and eth1 added as a perm router (multicast_router = 2): 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show <empty> At this point we have mcast enabled and eth1 as a perm router (value = 2) but it is not in the router list which is incorrect. After this change: 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show router ports on br0: eth1 Note: we can directly do br_multicast_enable_port for all because the querier timer already has checks for the port state and will simply expire if it's in blocking/disabled. See the comment added by commit 9aa66382163e7 ("bridge: multicast: add a comment to br_port_state_selection about blocking state") Fixes: 561f1103a2b7 ("bridge: Add multicast_snooping sysfs toggle") Reported-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18 18:09:48 +02:00
bridge: Fix a deadlock when enabling multicast snooping When enabling multicast snooping, bridge module deadlocks on multicast_lock if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2 network. The deadlock was caused by the following sequence: While holding the lock, br_multicast_open calls br_multicast_join_snoopers, which eventually causes IP stack to (attempt to) send out a Listener Report (in igmp6_join_group). Since the destination Ethernet address is a multicast address, br_dev_xmit feeds the packet back to the bridge via br_multicast_rcv, which in turn calls br_multicast_add_group, which then deadlocks on multicast_lock. The fix is to move the call br_multicast_join_snoopers outside of the critical section. This works since br_multicast_join_snoopers only deals with IP and does not modify any multicast data structures of the bridge, so there's no need to hold the lock. Steps to reproduce: 1. sysctl net.ipv6.conf.all.force_mld_version=1 2. have another querier 3. ip link set dev bridge type bridge mcast_snooping 0 && \ ip link set dev bridge type bridge mcast_snooping 1 < deadlock > A typical call trace looks like the following: [ 936.251495] _raw_spin_lock+0x5c/0x68 [ 936.255221] br_multicast_add_group+0x40/0x170 [bridge] [ 936.260491] br_multicast_rcv+0x7ac/0xe30 [bridge] [ 936.265322] br_dev_xmit+0x140/0x368 [bridge] [ 936.269689] dev_hard_start_xmit+0x94/0x158 [ 936.273876] __dev_queue_xmit+0x5ac/0x7f8 [ 936.277890] dev_queue_xmit+0x10/0x18 [ 936.281563] neigh_resolve_output+0xec/0x198 [ 936.285845] ip6_finish_output2+0x240/0x710 [ 936.290039] __ip6_finish_output+0x130/0x170 [ 936.294318] ip6_output+0x6c/0x1c8 [ 936.297731] NF_HOOK.constprop.0+0xd8/0xe8 [ 936.301834] igmp6_send+0x358/0x558 [ 936.305326] igmp6_join_group.part.0+0x30/0xf0 [ 936.309774] igmp6_group_added+0xfc/0x110 [ 936.313787] __ipv6_dev_mc_inc+0x1a4/0x290 [ 936.317885] ipv6_dev_mc_inc+0x10/0x18 [ 936.321677] br_multicast_open+0xbc/0x110 [bridge] [ 936.326506] br_multicast_toggle+0xec/0x140 [bridge] Fixes: 4effd28c1245 ("bridge: join all-snoopers multicast address") Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 18:56:28 -05:00
bridge: Fix a deadlock when enabling multicast snooping When enabling multicast snooping, bridge module deadlocks on multicast_lock if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2 network. The deadlock was caused by the following sequence: While holding the lock, br_multicast_open calls br_multicast_join_snoopers, which eventually causes IP stack to (attempt to) send out a Listener Report (in igmp6_join_group). Since the destination Ethernet address is a multicast address, br_dev_xmit feeds the packet back to the bridge via br_multicast_rcv, which in turn calls br_multicast_add_group, which then deadlocks on multicast_lock. The fix is to move the call br_multicast_join_snoopers outside of the critical section. This works since br_multicast_join_snoopers only deals with IP and does not modify any multicast data structures of the bridge, so there's no need to hold the lock. Steps to reproduce: 1. sysctl net.ipv6.conf.all.force_mld_version=1 2. have another querier 3. ip link set dev bridge type bridge mcast_snooping 0 && \ ip link set dev bridge type bridge mcast_snooping 1 < deadlock > A typical call trace looks like the following: [ 936.251495] _raw_spin_lock+0x5c/0x68 [ 936.255221] br_multicast_add_group+0x40/0x170 [bridge] [ 936.260491] br_multicast_rcv+0x7ac/0xe30 [bridge] [ 936.265322] br_dev_xmit+0x140/0x368 [bridge] [ 936.269689] dev_hard_start_xmit+0x94/0x158 [ 936.273876] __dev_queue_xmit+0x5ac/0x7f8 [ 936.277890] dev_queue_xmit+0x10/0x18 [ 936.281563] neigh_resolve_output+0xec/0x198 [ 936.285845] ip6_finish_output2+0x240/0x710 [ 936.290039] __ip6_finish_output+0x130/0x170 [ 936.294318] ip6_output+0x6c/0x1c8 [ 936.297731] NF_HOOK.constprop.0+0xd8/0xe8 [ 936.301834] igmp6_send+0x358/0x558 [ 936.305326] igmp6_join_group.part.0+0x30/0xf0 [ 936.309774] igmp6_group_added+0xfc/0x110 [ 936.313787] __ipv6_dev_mc_inc+0x1a4/0x290 [ 936.317885] ipv6_dev_mc_inc+0x10/0x18 [ 936.321677] br_multicast_open+0xbc/0x110 [bridge] [ 936.326506] br_multicast_toggle+0xec/0x140 [bridge] Fixes: 4effd28c1245 ("bridge: join all-snoopers multicast address") Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04 18:56:28 -05:00
bridge: mcast: fix disabled snooping after long uptime The original idea of the delay_time check was to not apply multicast snooping too early when an MLD querier appears. And to instead wait at least for MLD reports to arrive before switching from flooding to group based, MLD snooped forwarding, to avoid temporary packet loss. However in a batman-adv mesh network it was noticed that after 248 days of uptime 32bit MIPS based devices would start to signal that they had stopped applying multicast snooping due to missing queriers - even though they were the elected querier and still sending MLD queries themselves. While time_is_before_jiffies() generally is safe against jiffies wrap-arounds, like the code comments in jiffies.h explain, it won't be able to track a difference larger than ULONG_MAX/2. With a 32bit large jiffies and one jiffies tick every 10ms (CONFIG_HZ=100) on these MIPS devices running OpenWrt this would result in a difference larger than ULONG_MAX/2 after 248 (= 2^32/100/60/60/24/2) days and time_is_before_jiffies() would then start to return false instead of true. Leading to multicast snooping not being applied to multicast packets anymore. Fix this issue by using a proper timer_list object which won't have this ULONG_MAX/2 difference limitation. Fixes: b00589af3b04 ("bridge: disable snooping if there is no querier") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240127175033.9640-1-linus.luessing@c0d3.blue Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-27 18:50:32 +01:00
bridge: mcast: fix disabled snooping after long uptime The original idea of the delay_time check was to not apply multicast snooping too early when an MLD querier appears. And to instead wait at least for MLD reports to arrive before switching from flooding to group based, MLD snooped forwarding, to avoid temporary packet loss. However in a batman-adv mesh network it was noticed that after 248 days of uptime 32bit MIPS based devices would start to signal that they had stopped applying multicast snooping due to missing queriers - even though they were the elected querier and still sending MLD queries themselves. While time_is_before_jiffies() generally is safe against jiffies wrap-arounds, like the code comments in jiffies.h explain, it won't be able to track a difference larger than ULONG_MAX/2. With a 32bit large jiffies and one jiffies tick every 10ms (CONFIG_HZ=100) on these MIPS devices running OpenWrt this would result in a difference larger than ULONG_MAX/2 after 248 (= 2^32/100/60/60/24/2) days and time_is_before_jiffies() would then start to return false instead of true. Leading to multicast snooping not being applied to multicast packets anymore. Fix this issue by using a proper timer_list object which won't have this ULONG_MAX/2 difference limitation. Fixes: b00589af3b04 ("bridge: disable snooping if there is no querier") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240127175033.9640-1-linus.luessing@c0d3.blue Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-27 18:50:32 +01:00
net: bridge: fix soft lockup in br_multicast_query_expired() When set multicast_query_interval to a large value, the local variable 'time' in br_multicast_send_query() may overflow. If the time is smaller than jiffies, the timer will expire immediately, and then call mod_timer() again, which creates a loop and may trigger the following soft lockup issue. watchdog: BUG: soft lockup - CPU#1 stuck for 221s! [rb_consumer:66] CPU: 1 UID: 0 PID: 66 Comm: rb_consumer Not tainted 6.16.0+ #259 PREEMPT(none) Call Trace: <IRQ> __netdev_alloc_skb+0x2e/0x3a0 br_ip6_multicast_alloc_query+0x212/0x1b70 __br_multicast_send_query+0x376/0xac0 br_multicast_send_query+0x299/0x510 br_multicast_query_expired.constprop.0+0x16d/0x1b0 call_timer_fn+0x3b/0x2a0 __run_timers+0x619/0x950 run_timer_softirq+0x11c/0x220 handle_softirqs+0x18e/0x560 __irq_exit_rcu+0x158/0x1a0 sysvec_apic_timer_interrupt+0x76/0x90 </IRQ> This issue can be reproduced with: ip link add br0 type bridge echo 1 > /sys/class/net/br0/bridge/multicast_querier echo 0xffffffffffffffff > /sys/class/net/br0/bridge/multicast_query_interval ip link set dev br0 up The multicast_startup_query_interval can also cause this issue. Similar to the commit 99b40610956a ("net: bridge: mcast: add and enforce query interval minimum"), add check for the query interval maximum to fix this issue. Link: https://lore.kernel.org/netdev/20250806094941.1285944-1-wangliang74@huawei.com/ Link: https://lore.kernel.org/netdev/20250812091818.542238-1-wangliang74@huawei.com/ Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries") Suggested-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Wang Liang <wangliang74@huawei.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250813021054.1643649-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-13 10:10:54 +08:00
net: bridge: fix soft lockup in br_multicast_query_expired() When set multicast_query_interval to a large value, the local variable 'time' in br_multicast_send_query() may overflow. If the time is smaller than jiffies, the timer will expire immediately, and then call mod_timer() again, which creates a loop and may trigger the following soft lockup issue. watchdog: BUG: soft lockup - CPU#1 stuck for 221s! [rb_consumer:66] CPU: 1 UID: 0 PID: 66 Comm: rb_consumer Not tainted 6.16.0+ #259 PREEMPT(none) Call Trace: <IRQ> __netdev_alloc_skb+0x2e/0x3a0 br_ip6_multicast_alloc_query+0x212/0x1b70 __br_multicast_send_query+0x376/0xac0 br_multicast_send_query+0x299/0x510 br_multicast_query_expired.constprop.0+0x16d/0x1b0 call_timer_fn+0x3b/0x2a0 __run_timers+0x619/0x950 run_timer_softirq+0x11c/0x220 handle_softirqs+0x18e/0x560 __irq_exit_rcu+0x158/0x1a0 sysvec_apic_timer_interrupt+0x76/0x90 </IRQ> This issue can be reproduced with: ip link add br0 type bridge echo 1 > /sys/class/net/br0/bridge/multicast_querier echo 0xffffffffffffffff > /sys/class/net/br0/bridge/multicast_query_interval ip link set dev br0 up The multicast_startup_query_interval can also cause this issue. Similar to the commit 99b40610956a ("net: bridge: mcast: add and enforce query interval minimum"), add check for the query interval maximum to fix this issue. Link: https://lore.kernel.org/netdev/20250806094941.1285944-1-wangliang74@huawei.com/ Link: https://lore.kernel.org/netdev/20250812091818.542238-1-wangliang74@huawei.com/ Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries") Suggested-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Wang Liang <wangliang74@huawei.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250813021054.1643649-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-13 10:10:54 +08:00