License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
net/rds: rds_tcp_accept_one ought to not discard messages
RDS/TCP differs from RDS/RDMA in that message acknowledgment
is done based on TCP sequence numbers:
As soon as the last byte of a message has been acknowledged
by the TCP stack of a peer, "rds_tcp_write_space()" goes on
to discard prior messages from the send queue.
Which is fine, for as long as the receiver never throws any messages away.
Unfortunately, that is *not* the case since the introduction of MPRDS:
commit 1a0e100fb2c96 "RDS: TCP: Enable multipath RDS for TCP"
A new function "rds_tcp_accept_one_path" was introduced,
which is entitled to return "NULL", if no connection path is currently
available.
Unfortunately, this happens after the "->accept()" call, and the new socket
often already contains messages, since the peer already transitioned
to "RDS_CONN_UP" on behalf of "TCP_ESTABLISHED".
That's also the case after this [1]:
commit 1a0e100fb2c96 "RDS: TCP: Force every connection to be initiated by
numerically smaller IP address"
which tried to address the situation of pending data by only transitioning
connections from a smaller IP address to "RDS_CONN_UP".
But even in those cases, and in particular if the "RDS_EXTHDR_NPATHS"
handshake has not occurred yet, and therefore we're working with
"c_npaths <= 1", "c_conn[0]" may be in a state distinct from
"RDS_CONN_DOWN", and therefore all messages on the just accepted socket
will be tossed away.
This fix changes "rds_tcp_accept_one":
* If connected from a peer with a larger IP address, the new socket
will continue to get closed right away.
With commit [1] above, there should not be any messages
in the socket receive buffer, since the peer never transitioned
to "RDS_CONN_UP".
Therefore it should be okay to not make any efforts to dispatch
the socket receive buffer.
* If connected from a peer with a smaller IP address,
we call "rds_tcp_accept_one_path" to find a free slot/"path".
If found, business goes on as usual.
If none was found, we save/stash the newly accepted socket
into "rds_tcp_accepted_sock", in order to not lose any
messages that may have arrived already.
We then return from "rds_tcp_accept_one" with "-ENOBUFS".
Later on, when a slot/"path" does become available again
(e.g. state transitioned to "RDS_CONN_DOWN",
or HS extension header was received with "c_npaths > 1")
we call "rds_tcp_conn_slots_available" that simply re-issues
a "rds_tcp_accept_one_path" worker-callback and picks
up the new socket from "rds_tcp_accepted_sock", and thereby
continuing where it left with "-ENOBUFS" last time.
Since a new slot has become available, those messages
won't be lost, since processing proceeds as if that slot
had been available the first time around.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260122055213.83608-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-21 22:52:13 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-11-30 11:11:29 -08:00
|
|
|
|
2016-06-30 16:11:12 -07:00
|
|
|
|
|
|
|
|
|
2016-06-30 16:11:16 -07:00
|
|
|
|
2016-05-02 11:24:52 -07:00
|
|
|
|
2016-06-30 16:11:12 -07:00
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
2026-02-02 22:57:17 -07:00
|
|
|
|
net/rds: rds_tcp_accept_one ought to not discard messages
RDS/TCP differs from RDS/RDMA in that message acknowledgment
is done based on TCP sequence numbers:
As soon as the last byte of a message has been acknowledged
by the TCP stack of a peer, "rds_tcp_write_space()" goes on
to discard prior messages from the send queue.
Which is fine, for as long as the receiver never throws any messages away.
Unfortunately, that is *not* the case since the introduction of MPRDS:
commit 1a0e100fb2c96 "RDS: TCP: Enable multipath RDS for TCP"
A new function "rds_tcp_accept_one_path" was introduced,
which is entitled to return "NULL", if no connection path is currently
available.
Unfortunately, this happens after the "->accept()" call, and the new socket
often already contains messages, since the peer already transitioned
to "RDS_CONN_UP" on behalf of "TCP_ESTABLISHED".
That's also the case after this [1]:
commit 1a0e100fb2c96 "RDS: TCP: Force every connection to be initiated by
numerically smaller IP address"
which tried to address the situation of pending data by only transitioning
connections from a smaller IP address to "RDS_CONN_UP".
But even in those cases, and in particular if the "RDS_EXTHDR_NPATHS"
handshake has not occurred yet, and therefore we're working with
"c_npaths <= 1", "c_conn[0]" may be in a state distinct from
"RDS_CONN_DOWN", and therefore all messages on the just accepted socket
will be tossed away.
This fix changes "rds_tcp_accept_one":
* If connected from a peer with a larger IP address, the new socket
will continue to get closed right away.
With commit [1] above, there should not be any messages
in the socket receive buffer, since the peer never transitioned
to "RDS_CONN_UP".
Therefore it should be okay to not make any efforts to dispatch
the socket receive buffer.
* If connected from a peer with a smaller IP address,
we call "rds_tcp_accept_one_path" to find a free slot/"path".
If found, business goes on as usual.
If none was found, we save/stash the newly accepted socket
into "rds_tcp_accepted_sock", in order to not lose any
messages that may have arrived already.
We then return from "rds_tcp_accept_one" with "-ENOBUFS".
Later on, when a slot/"path" does become available again
(e.g. state transitioned to "RDS_CONN_DOWN",
or HS extension header was received with "c_npaths > 1")
we call "rds_tcp_conn_slots_available" that simply re-issues
a "rds_tcp_accept_one_path" worker-callback and picks
up the new socket from "rds_tcp_accepted_sock", and thereby
continuing where it left with "-ENOBUFS" last time.
Since a new slot has become available, those messages
won't be lost, since processing proceeds as if that slot
had been available the first time around.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260122055213.83608-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-21 22:52:13 -07:00
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
net/rds: rds_tcp_conn_path_shutdown must not discard messages
RDS/TCP differs from RDS/RDMA in that message acknowledgment
is done based on TCP sequence numbers:
As soon as the last byte of a message has been acknowledged by the
TCP stack of a peer, rds_tcp_write_space() goes on to discard
prior messages from the send queue.
Which is fine, for as long as the receiver never throws any messages
away.
The dequeuing of messages in RDS/TCP is done either from the
"sk_data_ready" callback pointing to rds_tcp_data_ready()
(the most common case), or from the receive worker pointing
to rds_tcp_recv_path() which is called for as long as the
connection is "RDS_CONN_UP".
However, as soon as rds_conn_path_drop() is called for whatever reason,
including "DR_USER_RESET", "cp_state" transitions to "RDS_CONN_ERROR",
and rds_tcp_restore_callbacks() ends up restoring the callbacks
and thereby disabling message receipt.
So messages already acknowledged to the sender were dropped.
Furthermore, the "->shutdown" callback was always called
with an invalid parameter ("RCV_SHUTDOWN | SEND_SHUTDOWN == 3"),
instead of the correct pre-increment value ("SHUT_RDWR == 2").
inet_shutdown() returns "-EINVAL" in such cases, rendering
this call a NOOP.
So we change rds_tcp_conn_path_shutdown() to do the proper
"->shutdown(SHUT_WR)" call in order to signal EOF to the peer
and make it transition to "TCP_CLOSE_WAIT" (RFC 793).
This should make the peer also enter rds_tcp_conn_path_shutdown()
and do the same.
This allows us to dequeue all messages already received
and acknowledged to the peer.
We do so, until we know that the receive queue no longer has data
(skb_queue_empty()) and that we couldn't have any data
in flight anymore, because the socket transitioned to
any of the states "CLOSING", "TIME_WAIT", "CLOSE_WAIT",
"LAST_ACK", or "CLOSE" (RFC 793).
However, if we do just that, we suddenly see duplicate RDS
messages being delivered to the application.
So what gives?
Turns out that with MPRDS and its multitude of backend connections,
retransmitted messages ("RDS_FLAG_RETRANSMITTED") can outrace
the dequeuing of their original counterparts.
And the duplicate check implemented in rds_recv_local() only
discards duplicates if flag "RDS_FLAG_RETRANSMITTED" is set.
Rather curious, because a duplicate is a duplicate; it shouldn't
matter which copy is looked at and delivered first.
To avoid this entire situation, we simply make the sender discard
messages from the send-queue right from within
rds_tcp_conn_path_shutdown(). Just like rds_tcp_write_space() would
have done, were it called in time or still called.
This makes sure that we no longer have messages that we know
the receiver already dequeued sitting in our send-queue,
and therefore avoid the entire "RDS_FLAG_RETRANSMITTED" fiasco.
Now we got rid of the duplicate RDS message delivery, but we
still run into cases where RDS messages are dropped.
This time it is due to the delayed setting of the socket-callbacks
in rds_tcp_accept_one() via either rds_tcp_reset_callbacks()
or rds_tcp_set_callbacks().
By the time rds_tcp_accept_one() gets there, the socket
may already have transitioned into state "TCP_CLOSE_WAIT",
but rds_tcp_state_change() was never called.
Subsequently, "->shutdown(SHUT_WR)" did not happen either.
So the peer ends up getting stuck in state "TCP_FIN_WAIT2".
We fix that by checking for states "TCP_CLOSE_WAIT", "TCP_LAST_ACK",
or "TCP_CLOSE" and drop the freshly accepted socket in that case.
This problem is observable by running "rds-stress --reset"
frequently on either of the two sides of a RDS connection,
or both while other "rds-stress" processes are exchanging data.
Those "rds-stress" processes reported out-of-sequence
errors, with the expected sequence number being smaller
than the one actually received (due to the dropped messages).
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-02 22:57:18 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
net/rds: rds_tcp_accept_one ought to not discard messages
RDS/TCP differs from RDS/RDMA in that message acknowledgment
is done based on TCP sequence numbers:
As soon as the last byte of a message has been acknowledged
by the TCP stack of a peer, "rds_tcp_write_space()" goes on
to discard prior messages from the send queue.
Which is fine, for as long as the receiver never throws any messages away.
Unfortunately, that is *not* the case since the introduction of MPRDS:
commit 1a0e100fb2c96 "RDS: TCP: Enable multipath RDS for TCP"
A new function "rds_tcp_accept_one_path" was introduced,
which is entitled to return "NULL", if no connection path is currently
available.
Unfortunately, this happens after the "->accept()" call, and the new socket
often already contains messages, since the peer already transitioned
to "RDS_CONN_UP" on behalf of "TCP_ESTABLISHED".
That's also the case after this [1]:
commit 1a0e100fb2c96 "RDS: TCP: Force every connection to be initiated by
numerically smaller IP address"
which tried to address the situation of pending data by only transitioning
connections from a smaller IP address to "RDS_CONN_UP".
But even in those cases, and in particular if the "RDS_EXTHDR_NPATHS"
handshake has not occurred yet, and therefore we're working with
"c_npaths <= 1", "c_conn[0]" may be in a state distinct from
"RDS_CONN_DOWN", and therefore all messages on the just accepted socket
will be tossed away.
This fix changes "rds_tcp_accept_one":
* If connected from a peer with a larger IP address, the new socket
will continue to get closed right away.
With commit [1] above, there should not be any messages
in the socket receive buffer, since the peer never transitioned
to "RDS_CONN_UP".
Therefore it should be okay to not make any efforts to dispatch
the socket receive buffer.
* If connected from a peer with a smaller IP address,
we call "rds_tcp_accept_one_path" to find a free slot/"path".
If found, business goes on as usual.
If none was found, we save/stash the newly accepted socket
into "rds_tcp_accepted_sock", in order to not lose any
messages that may have arrived already.
We then return from "rds_tcp_accept_one" with "-ENOBUFS".
Later on, when a slot/"path" does become available again
(e.g. state transitioned to "RDS_CONN_DOWN",
or HS extension header was received with "c_npaths > 1")
we call "rds_tcp_conn_slots_available" that simply re-issues
a "rds_tcp_accept_one_path" worker-callback and picks
up the new socket from "rds_tcp_accepted_sock", and thereby
continuing where it left with "-ENOBUFS" last time.
Since a new slot has become available, those messages
won't be lost, since processing proceeds as if that slot
had been available the first time around.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260122055213.83608-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-21 22:52:13 -07:00
|
|
|
|
2022-05-05 10:53:53 +09:00
|
|
|
|
2016-06-30 16:11:14 -07:00
|
|
|
|
|
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
|
|
|
|
|
2018-01-18 13:11:07 -08:00
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
|
|
|
|
|
net/rds: rds_tcp_accept_one ought to not discard messages
RDS/TCP differs from RDS/RDMA in that message acknowledgment
is done based on TCP sequence numbers:
As soon as the last byte of a message has been acknowledged
by the TCP stack of a peer, "rds_tcp_write_space()" goes on
to discard prior messages from the send queue.
Which is fine, for as long as the receiver never throws any messages away.
Unfortunately, that is *not* the case since the introduction of MPRDS:
commit 1a0e100fb2c96 "RDS: TCP: Enable multipath RDS for TCP"
A new function "rds_tcp_accept_one_path" was introduced,
which is entitled to return "NULL", if no connection path is currently
available.
Unfortunately, this happens after the "->accept()" call, and the new socket
often already contains messages, since the peer already transitioned
to "RDS_CONN_UP" on behalf of "TCP_ESTABLISHED".
That's also the case after this [1]:
commit 1a0e100fb2c96 "RDS: TCP: Force every connection to be initiated by
numerically smaller IP address"
which tried to address the situation of pending data by only transitioning
connections from a smaller IP address to "RDS_CONN_UP".
But even in those cases, and in particular if the "RDS_EXTHDR_NPATHS"
handshake has not occurred yet, and therefore we're working with
"c_npaths <= 1", "c_conn[0]" may be in a state distinct from
"RDS_CONN_DOWN", and therefore all messages on the just accepted socket
will be tossed away.
This fix changes "rds_tcp_accept_one":
* If connected from a peer with a larger IP address, the new socket
will continue to get closed right away.
With commit [1] above, there should not be any messages
in the socket receive buffer, since the peer never transitioned
to "RDS_CONN_UP".
Therefore it should be okay to not make any efforts to dispatch
the socket receive buffer.
* If connected from a peer with a smaller IP address,
we call "rds_tcp_accept_one_path" to find a free slot/"path".
If found, business goes on as usual.
If none was found, we save/stash the newly accepted socket
into "rds_tcp_accepted_sock", in order to not lose any
messages that may have arrived already.
We then return from "rds_tcp_accept_one" with "-ENOBUFS".
Later on, when a slot/"path" does become available again
(e.g. state transitioned to "RDS_CONN_DOWN",
or HS extension header was received with "c_npaths > 1")
we call "rds_tcp_conn_slots_available" that simply re-issues
a "rds_tcp_accept_one_path" worker-callback and picks
up the new socket from "rds_tcp_accepted_sock", and thereby
continuing where it left with "-ENOBUFS" last time.
Since a new slot has become available, those messages
won't be lost, since processing proceeds as if that slot
had been available the first time around.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260122055213.83608-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-21 22:52:13 -07:00
|
|
|
|
2021-05-21 11:08:06 -07:00
|
|
|
|
|
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
2016-06-30 16:11:16 -07:00
|
|
|
|
2016-06-30 16:11:10 -07:00
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-07-23 20:51:22 -07:00
|
|
|
|
2017-03-04 08:57:35 -08:00
|
|
|
|
2014-04-11 16:15:36 -04:00
|
|
|
|
net/rds: Trigger rds_send_ping() more than once
Even though a peer may have already received a
non-zero value for "RDS_EXTHDR_NPATHS" from a node in the past,
the current peer may not.
Therefore it is important to initiate another rds_send_ping()
after a re-connect to any peer:
It is unknown at that time if we're still talking to the same
instance of RDS kernel modules on the other side.
Otherwise, the peer may just operate on a single lane
("c_npaths == 0"), not knowing that more lanes are available.
However, if "c_with_sport_idx" is supported,
we also need to check that the connection we accepted on lane#0
meets the proper source port modulo requirement, as we fan out:
Since the exchange of "RDS_EXTHDR_NPATHS" and "RDS_EXTHDR_SPORT_IDX"
is asynchronous, initially we have no choice but to accept an incoming
connection (via "accept") in the first slot ("cp_index == 0")
for backwards compatibility.
But that very connection may have come from a different lane
with "cp_index != 0", since the peer thought that we already understood
and handled "c_with_sport_idx" properly, as indicated by a previous
exchange before a module was reloaded.
In short:
If a module gets reloaded, we recover from that, but do *not*
allow a downgrade to support fewer lanes.
Downgrades would require us to merge messages from separate lanes,
which is rather tricky with the current RDS design.
Each lane has its own sequence number space and all messages
would need to be re-sequenced as we merge, all while
handling "RDS_FLAG_RETRANSMITTED" and "cp_retrans" properly.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-9-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-02 22:57:23 -07:00
|
|
|
|
net/rds: rds_tcp_accept_one ought to not discard messages
RDS/TCP differs from RDS/RDMA in that message acknowledgment
is done based on TCP sequence numbers:
As soon as the last byte of a message has been acknowledged
by the TCP stack of a peer, "rds_tcp_write_space()" goes on
to discard prior messages from the send queue.
Which is fine, for as long as the receiver never throws any messages away.
Unfortunately, that is *not* the case since the introduction of MPRDS:
commit 1a0e100fb2c96 "RDS: TCP: Enable multipath RDS for TCP"
A new function "rds_tcp_accept_one_path" was introduced,
which is entitled to return "NULL", if no connection path is currently
available.
Unfortunately, this happens after the "->accept()" call, and the new socket
often already contains messages, since the peer already transitioned
to "RDS_CONN_UP" on behalf of "TCP_ESTABLISHED".
That's also the case after this [1]:
commit 1a0e100fb2c96 "RDS: TCP: Force every connection to be initiated by
numerically smaller IP address"
which tried to address the situation of pending data by only transitioning
connections from a smaller IP address to "RDS_CONN_UP".
But even in those cases, and in particular if the "RDS_EXTHDR_NPATHS"
handshake has not occurred yet, and therefore we're working with
"c_npaths <= 1", "c_conn[0]" may be in a state distinct from
"RDS_CONN_DOWN", and therefore all messages on the just accepted socket
will be tossed away.
This fix changes "rds_tcp_accept_one":
* If connected from a peer with a larger IP address, the new socket
will continue to get closed right away.
With commit [1] above, there should not be any messages
in the socket receive buffer, since the peer never transitioned
to "RDS_CONN_UP".
Therefore it should be okay to not make any efforts to dispatch
the socket receive buffer.
* If connected from a peer with a smaller IP address,
we call "rds_tcp_accept_one_path" to find a free slot/"path".
If found, business goes on as usual.
If none was found, we save/stash the newly accepted socket
into "rds_tcp_accepted_sock", in order to not lose any
messages that may have arrived already.
We then return from "rds_tcp_accept_one" with "-ENOBUFS".
Later on, when a slot/"path" does become available again
(e.g. state transitioned to "RDS_CONN_DOWN",
or HS extension header was received with "c_npaths > 1")
we call "rds_tcp_conn_slots_available" that simply re-issues
a "rds_tcp_accept_one_path" worker-callback and picks
up the new socket from "rds_tcp_accepted_sock", and thereby
continuing where it left with "-ENOBUFS" last time.
Since a new slot has become available, those messages
won't be lost, since processing proceeds as if that slot
had been available the first time around.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260122055213.83608-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-21 22:52:13 -07:00
|
|
|
|
2020-05-28 07:12:25 +02:00
|
|
|
|
2016-07-14 03:51:01 -07:00
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
|
|
|
|
|
2010-07-09 12:26:20 -07:00
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
2014-04-11 16:15:36 -04:00
|
|
|
|
2016-06-30 16:11:15 -07:00
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
2014-11-20 09:21:14 -05:00
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
|
|
|
|
|
2016-06-30 16:11:10 -07:00
|
|
|
|
|
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
2016-06-18 15:46:31 +00:00
|
|
|
|
net/rds: rds_tcp_conn_path_shutdown must not discard messages
RDS/TCP differs from RDS/RDMA in that message acknowledgment
is done based on TCP sequence numbers:
As soon as the last byte of a message has been acknowledged by the
TCP stack of a peer, rds_tcp_write_space() goes on to discard
prior messages from the send queue.
Which is fine, for as long as the receiver never throws any messages
away.
The dequeuing of messages in RDS/TCP is done either from the
"sk_data_ready" callback pointing to rds_tcp_data_ready()
(the most common case), or from the receive worker pointing
to rds_tcp_recv_path() which is called for as long as the
connection is "RDS_CONN_UP".
However, as soon as rds_conn_path_drop() is called for whatever reason,
including "DR_USER_RESET", "cp_state" transitions to "RDS_CONN_ERROR",
and rds_tcp_restore_callbacks() ends up restoring the callbacks
and thereby disabling message receipt.
So messages already acknowledged to the sender were dropped.
Furthermore, the "->shutdown" callback was always called
with an invalid parameter ("RCV_SHUTDOWN | SEND_SHUTDOWN == 3"),
instead of the correct pre-increment value ("SHUT_RDWR == 2").
inet_shutdown() returns "-EINVAL" in such cases, rendering
this call a NOOP.
So we change rds_tcp_conn_path_shutdown() to do the proper
"->shutdown(SHUT_WR)" call in order to signal EOF to the peer
and make it transition to "TCP_CLOSE_WAIT" (RFC 793).
This should make the peer also enter rds_tcp_conn_path_shutdown()
and do the same.
This allows us to dequeue all messages already received
and acknowledged to the peer.
We do so, until we know that the receive queue no longer has data
(skb_queue_empty()) and that we couldn't have any data
in flight anymore, because the socket transitioned to
any of the states "CLOSING", "TIME_WAIT", "CLOSE_WAIT",
"LAST_ACK", or "CLOSE" (RFC 793).
However, if we do just that, we suddenly see duplicate RDS
messages being delivered to the application.
So what gives?
Turns out that with MPRDS and its multitude of backend connections,
retransmitted messages ("RDS_FLAG_RETRANSMITTED") can outrace
the dequeuing of their original counterparts.
And the duplicate check implemented in rds_recv_local() only
discards duplicates if flag "RDS_FLAG_RETRANSMITTED" is set.
Rather curious, because a duplicate is a duplicate; it shouldn't
matter which copy is looked at and delivered first.
To avoid this entire situation, we simply make the sender discard
messages from the send-queue right from within
rds_tcp_conn_path_shutdown(). Just like rds_tcp_write_space() would
have done, were it called in time or still called.
This makes sure that we no longer have messages that we know
the receiver already dequeued sitting in our send-queue,
and therefore avoid the entire "RDS_FLAG_RETRANSMITTED" fiasco.
Now we got rid of the duplicate RDS message delivery, but we
still run into cases where RDS messages are dropped.
This time it is due to the delayed setting of the socket-callbacks
in rds_tcp_accept_one() via either rds_tcp_reset_callbacks()
or rds_tcp_set_callbacks().
By the time rds_tcp_accept_one() gets there, the socket
may already have transitioned into state "TCP_CLOSE_WAIT",
but rds_tcp_state_change() was never called.
Subsequently, "->shutdown(SHUT_WR)" did not happen either.
So the peer ends up getting stuck in state "TCP_FIN_WAIT2".
We fix that by checking for states "TCP_CLOSE_WAIT", "TCP_LAST_ACK",
or "TCP_CLOSE" and drop the freshly accepted socket in that case.
This problem is observable by running "rds-stress --reset"
frequently on either of the two sides of a RDS connection,
or both while other "rds-stress" processes are exchanging data.
Those "rds-stress" processes reported out-of-sequence
errors, with the expected sequence number being smaller
than the one actually received (due to the dropped messages).
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-02-02 22:57:18 -07:00
|
|
|
|
2009-08-21 12:28:31 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|