linux/net/sched/act_ct.c

1710 lines
41 KiB

net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get Convert zones_lock spinlock to zones_mutex mutex, and struct (tcf_ct_flow_table)->ref to a refcount, so that control path can use regular GFP_KERNEL allocations from standard process context. This is more robust in case of memory pressure. The refcount is needed because tcf_ct_flow_table_put() can be called from RCU callback, thus in BH context. The issue was spotted by syzbot, as rhashtable_init() was called with a spinlock held, which is bad since GFP_KERNEL allocations can sleep. Note to developers : Please make sure your patches are tested with CONFIG_DEBUG_ATOMIC_SLEEP=y BUG: sleeping function called from invalid context at mm/slab.h:565 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9582, name: syz-executor610 2 locks held by syz-executor610/9582: #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x3f9/0xad0 net/core/rtnetlink.c:5437 #1: ffffffff8a3961b8 (zones_lock){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffffffff8a3961b8 (zones_lock){+...}, at: tcf_ct_flow_table_get+0xa3/0x1700 net/sched/act_ct.c:67 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 0 PID: 9582 Comm: syz-executor610 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 ___might_sleep.cold+0x1f4/0x23d kernel/sched/core.c:6798 slab_pre_alloc_hook mm/slab.h:565 [inline] slab_alloc_node mm/slab.c:3227 [inline] kmem_cache_alloc_node_trace+0x272/0x790 mm/slab.c:3593 __do_kmalloc_node mm/slab.c:3615 [inline] __kmalloc_node+0x38/0x60 mm/slab.c:3623 kmalloc_node include/linux/slab.h:578 [inline] kvmalloc_node+0x61/0xf0 mm/util.c:574 kvmalloc include/linux/mm.h:645 [inline] kvzalloc include/linux/mm.h:653 [inline] bucket_table_alloc+0x8b/0x480 lib/rhashtable.c:175 rhashtable_init+0x3d2/0x750 lib/rhashtable.c:1054 nf_flow_table_init+0x16d/0x310 net/netfilter/nf_flow_table_core.c:498 tcf_ct_flow_table_get+0xe33/0x1700 net/sched/act_ct.c:82 tcf_ct_init+0xba4/0x18a6 net/sched/act_ct.c:1050 tcf_action_init_1+0x697/0xa20 net/sched/act_api.c:945 tcf_action_init+0x1e9/0x2f0 net/sched/act_api.c:1001 tcf_action_add+0xdb/0x370 net/sched/act_api.c:1411 tc_ctl_action+0x366/0x456 net/sched/act_api.c:1466 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5440 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2478 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6b9/0x7d0 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0xec/0x1b0 net/socket.c:2430 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4403d9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd719af218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000005 R09: 00000000004002c8 R10: 0000000000000008 R11: 00000000000 Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Blakey <paulb@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08 14:27:48 -07:00
net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get Convert zones_lock spinlock to zones_mutex mutex, and struct (tcf_ct_flow_table)->ref to a refcount, so that control path can use regular GFP_KERNEL allocations from standard process context. This is more robust in case of memory pressure. The refcount is needed because tcf_ct_flow_table_put() can be called from RCU callback, thus in BH context. The issue was spotted by syzbot, as rhashtable_init() was called with a spinlock held, which is bad since GFP_KERNEL allocations can sleep. Note to developers : Please make sure your patches are tested with CONFIG_DEBUG_ATOMIC_SLEEP=y BUG: sleeping function called from invalid context at mm/slab.h:565 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9582, name: syz-executor610 2 locks held by syz-executor610/9582: #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x3f9/0xad0 net/core/rtnetlink.c:5437 #1: ffffffff8a3961b8 (zones_lock){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffffffff8a3961b8 (zones_lock){+...}, at: tcf_ct_flow_table_get+0xa3/0x1700 net/sched/act_ct.c:67 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 0 PID: 9582 Comm: syz-executor610 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 ___might_sleep.cold+0x1f4/0x23d kernel/sched/core.c:6798 slab_pre_alloc_hook mm/slab.h:565 [inline] slab_alloc_node mm/slab.c:3227 [inline] kmem_cache_alloc_node_trace+0x272/0x790 mm/slab.c:3593 __do_kmalloc_node mm/slab.c:3615 [inline] __kmalloc_node+0x38/0x60 mm/slab.c:3623 kmalloc_node include/linux/slab.h:578 [inline] kvmalloc_node+0x61/0xf0 mm/util.c:574 kvmalloc include/linux/mm.h:645 [inline] kvzalloc include/linux/mm.h:653 [inline] bucket_table_alloc+0x8b/0x480 lib/rhashtable.c:175 rhashtable_init+0x3d2/0x750 lib/rhashtable.c:1054 nf_flow_table_init+0x16d/0x310 net/netfilter/nf_flow_table_core.c:498 tcf_ct_flow_table_get+0xe33/0x1700 net/sched/act_ct.c:82 tcf_ct_init+0xba4/0x18a6 net/sched/act_ct.c:1050 tcf_action_init_1+0x697/0xa20 net/sched/act_api.c:945 tcf_action_init+0x1e9/0x2f0 net/sched/act_api.c:1001 tcf_action_add+0xdb/0x370 net/sched/act_api.c:1411 tc_ctl_action+0x366/0x456 net/sched/act_api.c:1466 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5440 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2478 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6b9/0x7d0 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0xec/0x1b0 net/socket.c:2430 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4403d9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd719af218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000005 R09: 00000000004002c8 R10: 0000000000000008 R11: 00000000000 Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Blakey <paulb@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08 14:27:48 -07:00
net/sched: act_ct: Take per-cb reference to tcf_ct_flow_table The referenced change added custom cleanup code to act_ct to delete any callbacks registered on the parent block when deleting the tcf_ct_flow_table instance. However, the underlying issue is that the drivers don't obtain the reference to the tcf_ct_flow_table instance when registering callbacks which means that not only driver callbacks may still be on the table when deleting it but also that the driver can still have pointers to its internal nf_flowtable and can use it concurrently which results either warning in netfilter[0] or use-after-free. Fix the issue by taking a reference to the underlying struct tcf_ct_flow_table instance when registering the callback and release the reference when unregistering. Expose new API required for such reference counting by adding two new callbacks to nf_flowtable_type and implementing them for act_ct flowtable_ct type. This fixes the issue by extending the lifetime of nf_flowtable until all users have unregistered. [0]: [106170.938634] ------------[ cut here ]------------ [106170.939111] WARNING: CPU: 21 PID: 3688 at include/net/netfilter/nf_flow_table.h:262 mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.940108] Modules linked in: act_ct nf_flow_table act_mirred act_skbedit act_tunnel_key vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa bonding openvswitch nsh rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_regis try overlay mlx5_core [106170.943496] CPU: 21 PID: 3688 Comm: kworker/u48:0 Not tainted 6.6.0-rc7_for_upstream_min_debug_2023_11_01_13_02 #1 [106170.944361] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [106170.945292] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [106170.945846] RIP: 0010:mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.946413] Code: 89 ef 48 83 05 71 a4 14 00 01 e8 f4 06 04 e1 48 83 05 6c a4 14 00 01 48 83 c4 28 5b 5d 41 5c 41 5d c3 48 83 05 d1 8b 14 00 01 <0f> 0b 48 83 05 d7 8b 14 00 01 e9 96 fe ff ff 48 83 05 a2 90 14 00 [106170.947924] RSP: 0018:ffff88813ff0fcb8 EFLAGS: 00010202 [106170.948397] RAX: 0000000000000000 RBX: ffff88811eabac40 RCX: ffff88811eabad48 [106170.949040] RDX: ffff88811eab8000 RSI: ffffffffa02cd560 RDI: 0000000000000000 [106170.949679] RBP: ffff88811eab8000 R08: 0000000000000001 R09: ffffffffa0229700 [106170.950317] R10: ffff888103538fc0 R11: 0000000000000001 R12: ffff88811eabad58 [106170.950969] R13: ffff888110c01c00 R14: ffff888106b40000 R15: 0000000000000000 [106170.951616] FS: 0000000000000000(0000) GS:ffff88885fd40000(0000) knlGS:0000000000000000 [106170.952329] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [106170.952834] CR2: 00007f1cefd28cb0 CR3: 000000012181b006 CR4: 0000000000370ea0 [106170.953482] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [106170.954121] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [106170.954766] Call Trace: [106170.955057] <TASK> [106170.955315] ? __warn+0x79/0x120 [106170.955648] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.956172] ? report_bug+0x17c/0x190 [106170.956537] ? handle_bug+0x3c/0x60 [106170.956891] ? exc_invalid_op+0x14/0x70 [106170.957264] ? asm_exc_invalid_op+0x16/0x20 [106170.957666] ? mlx5_del_flow_rules+0x10/0x310 [mlx5_core] [106170.958172] ? mlx5_tc_ct_block_flow_offload_add+0x1240/0x1240 [mlx5_core] [106170.958788] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.959339] ? mlx5_tc_ct_del_ft_cb+0xc6/0x2b0 [mlx5_core] [106170.959854] ? mapping_remove+0x154/0x1d0 [mlx5_core] [106170.960342] ? mlx5e_tc_action_miss_mapping_put+0x4f/0x80 [mlx5_core] [106170.960927] mlx5_tc_ct_delete_flow+0x76/0xc0 [mlx5_core] [106170.961441] mlx5_free_flow_attr_actions+0x13b/0x220 [mlx5_core] [106170.962001] mlx5e_tc_del_fdb_flow+0x22c/0x3b0 [mlx5_core] [106170.962524] mlx5e_tc_del_flow+0x95/0x3c0 [mlx5_core] [106170.963034] mlx5e_flow_put+0x73/0xe0 [mlx5_core] [106170.963506] mlx5e_put_flow_list+0x38/0x70 [mlx5_core] [106170.964002] mlx5e_rep_update_flows+0xec/0x290 [mlx5_core] [106170.964525] mlx5e_rep_neigh_update+0x1da/0x310 [mlx5_core] [106170.965056] process_one_work+0x13a/0x2c0 [106170.965443] worker_thread+0x2e5/0x3f0 [106170.965808] ? rescuer_thread+0x410/0x410 [106170.966192] kthread+0xc6/0xf0 [106170.966515] ? kthread_complete_and_exit+0x20/0x20 [106170.966970] ret_from_fork+0x2d/0x50 [106170.967332] ? kthread_complete_and_exit+0x20/0x20 [106170.967774] ret_from_fork_asm+0x11/0x20 [106170.970466] </TASK> [106170.970726] ---[ end trace 0000000000000000 ]--- Fixes: 77ac5e40c44e ("net/sched: act_ct: remove and free nf_table callbacks") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-05 18:25:54 +01:00
net/sched: act_ct: Take per-cb reference to tcf_ct_flow_table The referenced change added custom cleanup code to act_ct to delete any callbacks registered on the parent block when deleting the tcf_ct_flow_table instance. However, the underlying issue is that the drivers don't obtain the reference to the tcf_ct_flow_table instance when registering callbacks which means that not only driver callbacks may still be on the table when deleting it but also that the driver can still have pointers to its internal nf_flowtable and can use it concurrently which results either warning in netfilter[0] or use-after-free. Fix the issue by taking a reference to the underlying struct tcf_ct_flow_table instance when registering the callback and release the reference when unregistering. Expose new API required for such reference counting by adding two new callbacks to nf_flowtable_type and implementing them for act_ct flowtable_ct type. This fixes the issue by extending the lifetime of nf_flowtable until all users have unregistered. [0]: [106170.938634] ------------[ cut here ]------------ [106170.939111] WARNING: CPU: 21 PID: 3688 at include/net/netfilter/nf_flow_table.h:262 mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.940108] Modules linked in: act_ct nf_flow_table act_mirred act_skbedit act_tunnel_key vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa bonding openvswitch nsh rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_regis try overlay mlx5_core [106170.943496] CPU: 21 PID: 3688 Comm: kworker/u48:0 Not tainted 6.6.0-rc7_for_upstream_min_debug_2023_11_01_13_02 #1 [106170.944361] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [106170.945292] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [106170.945846] RIP: 0010:mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.946413] Code: 89 ef 48 83 05 71 a4 14 00 01 e8 f4 06 04 e1 48 83 05 6c a4 14 00 01 48 83 c4 28 5b 5d 41 5c 41 5d c3 48 83 05 d1 8b 14 00 01 <0f> 0b 48 83 05 d7 8b 14 00 01 e9 96 fe ff ff 48 83 05 a2 90 14 00 [106170.947924] RSP: 0018:ffff88813ff0fcb8 EFLAGS: 00010202 [106170.948397] RAX: 0000000000000000 RBX: ffff88811eabac40 RCX: ffff88811eabad48 [106170.949040] RDX: ffff88811eab8000 RSI: ffffffffa02cd560 RDI: 0000000000000000 [106170.949679] RBP: ffff88811eab8000 R08: 0000000000000001 R09: ffffffffa0229700 [106170.950317] R10: ffff888103538fc0 R11: 0000000000000001 R12: ffff88811eabad58 [106170.950969] R13: ffff888110c01c00 R14: ffff888106b40000 R15: 0000000000000000 [106170.951616] FS: 0000000000000000(0000) GS:ffff88885fd40000(0000) knlGS:0000000000000000 [106170.952329] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [106170.952834] CR2: 00007f1cefd28cb0 CR3: 000000012181b006 CR4: 0000000000370ea0 [106170.953482] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [106170.954121] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [106170.954766] Call Trace: [106170.955057] <TASK> [106170.955315] ? __warn+0x79/0x120 [106170.955648] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.956172] ? report_bug+0x17c/0x190 [106170.956537] ? handle_bug+0x3c/0x60 [106170.956891] ? exc_invalid_op+0x14/0x70 [106170.957264] ? asm_exc_invalid_op+0x16/0x20 [106170.957666] ? mlx5_del_flow_rules+0x10/0x310 [mlx5_core] [106170.958172] ? mlx5_tc_ct_block_flow_offload_add+0x1240/0x1240 [mlx5_core] [106170.958788] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.959339] ? mlx5_tc_ct_del_ft_cb+0xc6/0x2b0 [mlx5_core] [106170.959854] ? mapping_remove+0x154/0x1d0 [mlx5_core] [106170.960342] ? mlx5e_tc_action_miss_mapping_put+0x4f/0x80 [mlx5_core] [106170.960927] mlx5_tc_ct_delete_flow+0x76/0xc0 [mlx5_core] [106170.961441] mlx5_free_flow_attr_actions+0x13b/0x220 [mlx5_core] [106170.962001] mlx5e_tc_del_fdb_flow+0x22c/0x3b0 [mlx5_core] [106170.962524] mlx5e_tc_del_flow+0x95/0x3c0 [mlx5_core] [106170.963034] mlx5e_flow_put+0x73/0xe0 [mlx5_core] [106170.963506] mlx5e_put_flow_list+0x38/0x70 [mlx5_core] [106170.964002] mlx5e_rep_update_flows+0xec/0x290 [mlx5_core] [106170.964525] mlx5e_rep_neigh_update+0x1da/0x310 [mlx5_core] [106170.965056] process_one_work+0x13a/0x2c0 [106170.965443] worker_thread+0x2e5/0x3f0 [106170.965808] ? rescuer_thread+0x410/0x410 [106170.966192] kthread+0xc6/0xf0 [106170.966515] ? kthread_complete_and_exit+0x20/0x20 [106170.966970] ret_from_fork+0x2d/0x50 [106170.967332] ? kthread_complete_and_exit+0x20/0x20 [106170.967774] ret_from_fork_asm+0x11/0x20 [106170.970466] </TASK> [106170.970726] ---[ end trace 0000000000000000 ]--- Fixes: 77ac5e40c44e ("net/sched: act_ct: remove and free nf_table callbacks") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-05 18:25:54 +01:00
net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get Convert zones_lock spinlock to zones_mutex mutex, and struct (tcf_ct_flow_table)->ref to a refcount, so that control path can use regular GFP_KERNEL allocations from standard process context. This is more robust in case of memory pressure. The refcount is needed because tcf_ct_flow_table_put() can be called from RCU callback, thus in BH context. The issue was spotted by syzbot, as rhashtable_init() was called with a spinlock held, which is bad since GFP_KERNEL allocations can sleep. Note to developers : Please make sure your patches are tested with CONFIG_DEBUG_ATOMIC_SLEEP=y BUG: sleeping function called from invalid context at mm/slab.h:565 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9582, name: syz-executor610 2 locks held by syz-executor610/9582: #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x3f9/0xad0 net/core/rtnetlink.c:5437 #1: ffffffff8a3961b8 (zones_lock){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffffffff8a3961b8 (zones_lock){+...}, at: tcf_ct_flow_table_get+0xa3/0x1700 net/sched/act_ct.c:67 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 0 PID: 9582 Comm: syz-executor610 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 ___might_sleep.cold+0x1f4/0x23d kernel/sched/core.c:6798 slab_pre_alloc_hook mm/slab.h:565 [inline] slab_alloc_node mm/slab.c:3227 [inline] kmem_cache_alloc_node_trace+0x272/0x790 mm/slab.c:3593 __do_kmalloc_node mm/slab.c:3615 [inline] __kmalloc_node+0x38/0x60 mm/slab.c:3623 kmalloc_node include/linux/slab.h:578 [inline] kvmalloc_node+0x61/0xf0 mm/util.c:574 kvmalloc include/linux/mm.h:645 [inline] kvzalloc include/linux/mm.h:653 [inline] bucket_table_alloc+0x8b/0x480 lib/rhashtable.c:175 rhashtable_init+0x3d2/0x750 lib/rhashtable.c:1054 nf_flow_table_init+0x16d/0x310 net/netfilter/nf_flow_table_core.c:498 tcf_ct_flow_table_get+0xe33/0x1700 net/sched/act_ct.c:82 tcf_ct_init+0xba4/0x18a6 net/sched/act_ct.c:1050 tcf_action_init_1+0x697/0xa20 net/sched/act_api.c:945 tcf_action_init+0x1e9/0x2f0 net/sched/act_api.c:1001 tcf_action_add+0xdb/0x370 net/sched/act_api.c:1411 tc_ctl_action+0x366/0x456 net/sched/act_api.c:1466 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5440 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2478 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6b9/0x7d0 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0xec/0x1b0 net/socket.c:2430 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4403d9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd719af218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000005 R09: 00000000004002c8 R10: 0000000000000008 R11: 00000000000 Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Blakey <paulb@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08 14:27:48 -07:00
net/sched: act_ct: Only release RCU read lock after ct_ft When looking up a flow table in act_ct in tcf_ct_flow_table_get(), rhashtable_lookup_fast() internally opens and closes an RCU read critical section before returning ct_ft. The tcf_ct_flow_table_cleanup_work() can complete before refcount_inc_not_zero() is invoked on the returned ct_ft resulting in a UAF on the already freed ct_ft object. This vulnerability can lead to privilege escalation. Analysis from zdi-disclosures@trendmicro.com: When initializing act_ct, tcf_ct_init() is called, which internally triggers tcf_ct_flow_table_get(). static int tcf_ct_flow_table_get(struct net *net, struct tcf_ct_params *params) { struct zones_ht_key key = { .net = net, .zone = params->zone }; struct tcf_ct_flow_table *ct_ft; int err = -ENOMEM; mutex_lock(&zones_mutex); ct_ft = rhashtable_lookup_fast(&zones_ht, &key, zones_params); // [1] if (ct_ft && refcount_inc_not_zero(&ct_ft->ref)) // [2] goto out_unlock; ... } static __always_inline void *rhashtable_lookup_fast( struct rhashtable *ht, const void *key, const struct rhashtable_params params) { void *obj; rcu_read_lock(); obj = rhashtable_lookup(ht, key, params); rcu_read_unlock(); return obj; } At [1], rhashtable_lookup_fast() looks up and returns the corresponding ct_ft from zones_ht . The lookup is performed within an RCU read critical section through rcu_read_lock() / rcu_read_unlock(), which prevents the object from being freed. However, at the point of function return, rcu_read_unlock() has already been called, and there is nothing preventing ct_ft from being freed before reaching refcount_inc_not_zero(&ct_ft->ref) at [2]. This interval becomes the race window, during which ct_ft can be freed. Free Process: tcf_ct_flow_table_put() is executed through the path tcf_ct_cleanup() call_rcu() tcf_ct_params_free_rcu() tcf_ct_params_free() tcf_ct_flow_table_put(). static void tcf_ct_flow_table_put(struct tcf_ct_flow_table *ct_ft) { if (refcount_dec_and_test(&ct_ft->ref)) { rhashtable_remove_fast(&zones_ht, &ct_ft->node, zones_params); INIT_RCU_WORK(&ct_ft->rwork, tcf_ct_flow_table_cleanup_work); // [3] queue_rcu_work(act_ct_wq, &ct_ft->rwork); } } At [3], tcf_ct_flow_table_cleanup_work() is scheduled as RCU work static void tcf_ct_flow_table_cleanup_work(struct work_struct *work) { struct tcf_ct_flow_table *ct_ft; struct flow_block *block; ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table, rwork); nf_flow_table_free(&ct_ft->nf_ft); block = &ct_ft->nf_ft.flow_block; down_write(&ct_ft->nf_ft.flow_block_lock); WARN_ON(!list_empty(&block->cb_list)); up_write(&ct_ft->nf_ft.flow_block_lock); kfree(ct_ft); // [4] module_put(THIS_MODULE); } tcf_ct_flow_table_cleanup_work() frees ct_ft at [4]. When this function executes between [1] and [2], UAF occurs. This race condition has a very short race window, making it generally difficult to trigger. Therefore, to trigger the vulnerability an msleep(100) was inserted after[1] Fixes: 138470a9b2cc2 ("net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get") Reported-by: zdi-disclosures@trendmicro.com Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260410111627.46611-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-10 07:16:27 -04:00
net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get Convert zones_lock spinlock to zones_mutex mutex, and struct (tcf_ct_flow_table)->ref to a refcount, so that control path can use regular GFP_KERNEL allocations from standard process context. This is more robust in case of memory pressure. The refcount is needed because tcf_ct_flow_table_put() can be called from RCU callback, thus in BH context. The issue was spotted by syzbot, as rhashtable_init() was called with a spinlock held, which is bad since GFP_KERNEL allocations can sleep. Note to developers : Please make sure your patches are tested with CONFIG_DEBUG_ATOMIC_SLEEP=y BUG: sleeping function called from invalid context at mm/slab.h:565 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9582, name: syz-executor610 2 locks held by syz-executor610/9582: #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x3f9/0xad0 net/core/rtnetlink.c:5437 #1: ffffffff8a3961b8 (zones_lock){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffffffff8a3961b8 (zones_lock){+...}, at: tcf_ct_flow_table_get+0xa3/0x1700 net/sched/act_ct.c:67 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 0 PID: 9582 Comm: syz-executor610 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 ___might_sleep.cold+0x1f4/0x23d kernel/sched/core.c:6798 slab_pre_alloc_hook mm/slab.h:565 [inline] slab_alloc_node mm/slab.c:3227 [inline] kmem_cache_alloc_node_trace+0x272/0x790 mm/slab.c:3593 __do_kmalloc_node mm/slab.c:3615 [inline] __kmalloc_node+0x38/0x60 mm/slab.c:3623 kmalloc_node include/linux/slab.h:578 [inline] kvmalloc_node+0x61/0xf0 mm/util.c:574 kvmalloc include/linux/mm.h:645 [inline] kvzalloc include/linux/mm.h:653 [inline] bucket_table_alloc+0x8b/0x480 lib/rhashtable.c:175 rhashtable_init+0x3d2/0x750 lib/rhashtable.c:1054 nf_flow_table_init+0x16d/0x310 net/netfilter/nf_flow_table_core.c:498 tcf_ct_flow_table_get+0xe33/0x1700 net/sched/act_ct.c:82 tcf_ct_init+0xba4/0x18a6 net/sched/act_ct.c:1050 tcf_action_init_1+0x697/0xa20 net/sched/act_api.c:945 tcf_action_init+0x1e9/0x2f0 net/sched/act_api.c:1001 tcf_action_add+0xdb/0x370 net/sched/act_api.c:1411 tc_ctl_action+0x366/0x456 net/sched/act_api.c:1466 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5440 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2478 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6b9/0x7d0 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0xec/0x1b0 net/socket.c:2430 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4403d9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd719af218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000005 R09: 00000000004002c8 R10: 0000000000000008 R11: 00000000000 Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Blakey <paulb@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08 14:27:48 -07:00
net/sched: act_ct: Only release RCU read lock after ct_ft When looking up a flow table in act_ct in tcf_ct_flow_table_get(), rhashtable_lookup_fast() internally opens and closes an RCU read critical section before returning ct_ft. The tcf_ct_flow_table_cleanup_work() can complete before refcount_inc_not_zero() is invoked on the returned ct_ft resulting in a UAF on the already freed ct_ft object. This vulnerability can lead to privilege escalation. Analysis from zdi-disclosures@trendmicro.com: When initializing act_ct, tcf_ct_init() is called, which internally triggers tcf_ct_flow_table_get(). static int tcf_ct_flow_table_get(struct net *net, struct tcf_ct_params *params) { struct zones_ht_key key = { .net = net, .zone = params->zone }; struct tcf_ct_flow_table *ct_ft; int err = -ENOMEM; mutex_lock(&zones_mutex); ct_ft = rhashtable_lookup_fast(&zones_ht, &key, zones_params); // [1] if (ct_ft && refcount_inc_not_zero(&ct_ft->ref)) // [2] goto out_unlock; ... } static __always_inline void *rhashtable_lookup_fast( struct rhashtable *ht, const void *key, const struct rhashtable_params params) { void *obj; rcu_read_lock(); obj = rhashtable_lookup(ht, key, params); rcu_read_unlock(); return obj; } At [1], rhashtable_lookup_fast() looks up and returns the corresponding ct_ft from zones_ht . The lookup is performed within an RCU read critical section through rcu_read_lock() / rcu_read_unlock(), which prevents the object from being freed. However, at the point of function return, rcu_read_unlock() has already been called, and there is nothing preventing ct_ft from being freed before reaching refcount_inc_not_zero(&ct_ft->ref) at [2]. This interval becomes the race window, during which ct_ft can be freed. Free Process: tcf_ct_flow_table_put() is executed through the path tcf_ct_cleanup() call_rcu() tcf_ct_params_free_rcu() tcf_ct_params_free() tcf_ct_flow_table_put(). static void tcf_ct_flow_table_put(struct tcf_ct_flow_table *ct_ft) { if (refcount_dec_and_test(&ct_ft->ref)) { rhashtable_remove_fast(&zones_ht, &ct_ft->node, zones_params); INIT_RCU_WORK(&ct_ft->rwork, tcf_ct_flow_table_cleanup_work); // [3] queue_rcu_work(act_ct_wq, &ct_ft->rwork); } } At [3], tcf_ct_flow_table_cleanup_work() is scheduled as RCU work static void tcf_ct_flow_table_cleanup_work(struct work_struct *work) { struct tcf_ct_flow_table *ct_ft; struct flow_block *block; ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table, rwork); nf_flow_table_free(&ct_ft->nf_ft); block = &ct_ft->nf_ft.flow_block; down_write(&ct_ft->nf_ft.flow_block_lock); WARN_ON(!list_empty(&block->cb_list)); up_write(&ct_ft->nf_ft.flow_block_lock); kfree(ct_ft); // [4] module_put(THIS_MODULE); } tcf_ct_flow_table_cleanup_work() frees ct_ft at [4]. When this function executes between [1] and [2], UAF occurs. This race condition has a very short race window, making it generally difficult to trigger. Therefore, to trigger the vulnerability an msleep(100) was inserted after[1] Fixes: 138470a9b2cc2 ("net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get") Reported-by: zdi-disclosures@trendmicro.com Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260410111627.46611-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-10 07:16:27 -04:00
net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get Convert zones_lock spinlock to zones_mutex mutex, and struct (tcf_ct_flow_table)->ref to a refcount, so that control path can use regular GFP_KERNEL allocations from standard process context. This is more robust in case of memory pressure. The refcount is needed because tcf_ct_flow_table_put() can be called from RCU callback, thus in BH context. The issue was spotted by syzbot, as rhashtable_init() was called with a spinlock held, which is bad since GFP_KERNEL allocations can sleep. Note to developers : Please make sure your patches are tested with CONFIG_DEBUG_ATOMIC_SLEEP=y BUG: sleeping function called from invalid context at mm/slab.h:565 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9582, name: syz-executor610 2 locks held by syz-executor610/9582: #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x3f9/0xad0 net/core/rtnetlink.c:5437 #1: ffffffff8a3961b8 (zones_lock){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffffffff8a3961b8 (zones_lock){+...}, at: tcf_ct_flow_table_get+0xa3/0x1700 net/sched/act_ct.c:67 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 0 PID: 9582 Comm: syz-executor610 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 ___might_sleep.cold+0x1f4/0x23d kernel/sched/core.c:6798 slab_pre_alloc_hook mm/slab.h:565 [inline] slab_alloc_node mm/slab.c:3227 [inline] kmem_cache_alloc_node_trace+0x272/0x790 mm/slab.c:3593 __do_kmalloc_node mm/slab.c:3615 [inline] __kmalloc_node+0x38/0x60 mm/slab.c:3623 kmalloc_node include/linux/slab.h:578 [inline] kvmalloc_node+0x61/0xf0 mm/util.c:574 kvmalloc include/linux/mm.h:645 [inline] kvzalloc include/linux/mm.h:653 [inline] bucket_table_alloc+0x8b/0x480 lib/rhashtable.c:175 rhashtable_init+0x3d2/0x750 lib/rhashtable.c:1054 nf_flow_table_init+0x16d/0x310 net/netfilter/nf_flow_table_core.c:498 tcf_ct_flow_table_get+0xe33/0x1700 net/sched/act_ct.c:82 tcf_ct_init+0xba4/0x18a6 net/sched/act_ct.c:1050 tcf_action_init_1+0x697/0xa20 net/sched/act_api.c:945 tcf_action_init+0x1e9/0x2f0 net/sched/act_api.c:1001 tcf_action_add+0xdb/0x370 net/sched/act_api.c:1411 tc_ctl_action+0x366/0x456 net/sched/act_api.c:1466 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5440 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2478 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6b9/0x7d0 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0xec/0x1b0 net/socket.c:2430 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4403d9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd719af218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000005 R09: 00000000004002c8 R10: 0000000000000008 R11: 00000000000 Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Blakey <paulb@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08 14:27:48 -07:00
net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get Convert zones_lock spinlock to zones_mutex mutex, and struct (tcf_ct_flow_table)->ref to a refcount, so that control path can use regular GFP_KERNEL allocations from standard process context. This is more robust in case of memory pressure. The refcount is needed because tcf_ct_flow_table_put() can be called from RCU callback, thus in BH context. The issue was spotted by syzbot, as rhashtable_init() was called with a spinlock held, which is bad since GFP_KERNEL allocations can sleep. Note to developers : Please make sure your patches are tested with CONFIG_DEBUG_ATOMIC_SLEEP=y BUG: sleeping function called from invalid context at mm/slab.h:565 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9582, name: syz-executor610 2 locks held by syz-executor610/9582: #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x3f9/0xad0 net/core/rtnetlink.c:5437 #1: ffffffff8a3961b8 (zones_lock){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffffffff8a3961b8 (zones_lock){+...}, at: tcf_ct_flow_table_get+0xa3/0x1700 net/sched/act_ct.c:67 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 0 PID: 9582 Comm: syz-executor610 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 ___might_sleep.cold+0x1f4/0x23d kernel/sched/core.c:6798 slab_pre_alloc_hook mm/slab.h:565 [inline] slab_alloc_node mm/slab.c:3227 [inline] kmem_cache_alloc_node_trace+0x272/0x790 mm/slab.c:3593 __do_kmalloc_node mm/slab.c:3615 [inline] __kmalloc_node+0x38/0x60 mm/slab.c:3623 kmalloc_node include/linux/slab.h:578 [inline] kvmalloc_node+0x61/0xf0 mm/util.c:574 kvmalloc include/linux/mm.h:645 [inline] kvzalloc include/linux/mm.h:653 [inline] bucket_table_alloc+0x8b/0x480 lib/rhashtable.c:175 rhashtable_init+0x3d2/0x750 lib/rhashtable.c:1054 nf_flow_table_init+0x16d/0x310 net/netfilter/nf_flow_table_core.c:498 tcf_ct_flow_table_get+0xe33/0x1700 net/sched/act_ct.c:82 tcf_ct_init+0xba4/0x18a6 net/sched/act_ct.c:1050 tcf_action_init_1+0x697/0xa20 net/sched/act_api.c:945 tcf_action_init+0x1e9/0x2f0 net/sched/act_api.c:1001 tcf_action_add+0xdb/0x370 net/sched/act_api.c:1411 tc_ctl_action+0x366/0x456 net/sched/act_api.c:1466 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5440 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2478 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6b9/0x7d0 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0xec/0x1b0 net/socket.c:2430 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4403d9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd719af218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000005 R09: 00000000004002c8 R10: 0000000000000008 R11: 00000000000 Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Blakey <paulb@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08 14:27:48 -07:00
net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get Convert zones_lock spinlock to zones_mutex mutex, and struct (tcf_ct_flow_table)->ref to a refcount, so that control path can use regular GFP_KERNEL allocations from standard process context. This is more robust in case of memory pressure. The refcount is needed because tcf_ct_flow_table_put() can be called from RCU callback, thus in BH context. The issue was spotted by syzbot, as rhashtable_init() was called with a spinlock held, which is bad since GFP_KERNEL allocations can sleep. Note to developers : Please make sure your patches are tested with CONFIG_DEBUG_ATOMIC_SLEEP=y BUG: sleeping function called from invalid context at mm/slab.h:565 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9582, name: syz-executor610 2 locks held by syz-executor610/9582: #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x3f9/0xad0 net/core/rtnetlink.c:5437 #1: ffffffff8a3961b8 (zones_lock){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffffffff8a3961b8 (zones_lock){+...}, at: tcf_ct_flow_table_get+0xa3/0x1700 net/sched/act_ct.c:67 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 0 PID: 9582 Comm: syz-executor610 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 ___might_sleep.cold+0x1f4/0x23d kernel/sched/core.c:6798 slab_pre_alloc_hook mm/slab.h:565 [inline] slab_alloc_node mm/slab.c:3227 [inline] kmem_cache_alloc_node_trace+0x272/0x790 mm/slab.c:3593 __do_kmalloc_node mm/slab.c:3615 [inline] __kmalloc_node+0x38/0x60 mm/slab.c:3623 kmalloc_node include/linux/slab.h:578 [inline] kvmalloc_node+0x61/0xf0 mm/util.c:574 kvmalloc include/linux/mm.h:645 [inline] kvzalloc include/linux/mm.h:653 [inline] bucket_table_alloc+0x8b/0x480 lib/rhashtable.c:175 rhashtable_init+0x3d2/0x750 lib/rhashtable.c:1054 nf_flow_table_init+0x16d/0x310 net/netfilter/nf_flow_table_core.c:498 tcf_ct_flow_table_get+0xe33/0x1700 net/sched/act_ct.c:82 tcf_ct_init+0xba4/0x18a6 net/sched/act_ct.c:1050 tcf_action_init_1+0x697/0xa20 net/sched/act_api.c:945 tcf_action_init+0x1e9/0x2f0 net/sched/act_api.c:1001 tcf_action_add+0xdb/0x370 net/sched/act_api.c:1411 tc_ctl_action+0x366/0x456 net/sched/act_api.c:1466 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5440 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2478 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6b9/0x7d0 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0xec/0x1b0 net/socket.c:2430 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4403d9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd719af218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000005 R09: 00000000004002c8 R10: 0000000000000008 R11: 00000000000 Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Blakey <paulb@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08 14:27:48 -07:00
net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get Convert zones_lock spinlock to zones_mutex mutex, and struct (tcf_ct_flow_table)->ref to a refcount, so that control path can use regular GFP_KERNEL allocations from standard process context. This is more robust in case of memory pressure. The refcount is needed because tcf_ct_flow_table_put() can be called from RCU callback, thus in BH context. The issue was spotted by syzbot, as rhashtable_init() was called with a spinlock held, which is bad since GFP_KERNEL allocations can sleep. Note to developers : Please make sure your patches are tested with CONFIG_DEBUG_ATOMIC_SLEEP=y BUG: sleeping function called from invalid context at mm/slab.h:565 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9582, name: syz-executor610 2 locks held by syz-executor610/9582: #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x3f9/0xad0 net/core/rtnetlink.c:5437 #1: ffffffff8a3961b8 (zones_lock){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffffffff8a3961b8 (zones_lock){+...}, at: tcf_ct_flow_table_get+0xa3/0x1700 net/sched/act_ct.c:67 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 0 PID: 9582 Comm: syz-executor610 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 ___might_sleep.cold+0x1f4/0x23d kernel/sched/core.c:6798 slab_pre_alloc_hook mm/slab.h:565 [inline] slab_alloc_node mm/slab.c:3227 [inline] kmem_cache_alloc_node_trace+0x272/0x790 mm/slab.c:3593 __do_kmalloc_node mm/slab.c:3615 [inline] __kmalloc_node+0x38/0x60 mm/slab.c:3623 kmalloc_node include/linux/slab.h:578 [inline] kvmalloc_node+0x61/0xf0 mm/util.c:574 kvmalloc include/linux/mm.h:645 [inline] kvzalloc include/linux/mm.h:653 [inline] bucket_table_alloc+0x8b/0x480 lib/rhashtable.c:175 rhashtable_init+0x3d2/0x750 lib/rhashtable.c:1054 nf_flow_table_init+0x16d/0x310 net/netfilter/nf_flow_table_core.c:498 tcf_ct_flow_table_get+0xe33/0x1700 net/sched/act_ct.c:82 tcf_ct_init+0xba4/0x18a6 net/sched/act_ct.c:1050 tcf_action_init_1+0x697/0xa20 net/sched/act_api.c:945 tcf_action_init+0x1e9/0x2f0 net/sched/act_api.c:1001 tcf_action_add+0xdb/0x370 net/sched/act_api.c:1411 tc_ctl_action+0x366/0x456 net/sched/act_api.c:1466 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5440 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2478 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6b9/0x7d0 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0xec/0x1b0 net/socket.c:2430 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4403d9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd719af218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000005 R09: 00000000004002c8 R10: 0000000000000008 R11: 00000000000 Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Blakey <paulb@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08 14:27:48 -07:00
net/sched: act_ct: Take per-cb reference to tcf_ct_flow_table The referenced change added custom cleanup code to act_ct to delete any callbacks registered on the parent block when deleting the tcf_ct_flow_table instance. However, the underlying issue is that the drivers don't obtain the reference to the tcf_ct_flow_table instance when registering callbacks which means that not only driver callbacks may still be on the table when deleting it but also that the driver can still have pointers to its internal nf_flowtable and can use it concurrently which results either warning in netfilter[0] or use-after-free. Fix the issue by taking a reference to the underlying struct tcf_ct_flow_table instance when registering the callback and release the reference when unregistering. Expose new API required for such reference counting by adding two new callbacks to nf_flowtable_type and implementing them for act_ct flowtable_ct type. This fixes the issue by extending the lifetime of nf_flowtable until all users have unregistered. [0]: [106170.938634] ------------[ cut here ]------------ [106170.939111] WARNING: CPU: 21 PID: 3688 at include/net/netfilter/nf_flow_table.h:262 mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.940108] Modules linked in: act_ct nf_flow_table act_mirred act_skbedit act_tunnel_key vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa bonding openvswitch nsh rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_regis try overlay mlx5_core [106170.943496] CPU: 21 PID: 3688 Comm: kworker/u48:0 Not tainted 6.6.0-rc7_for_upstream_min_debug_2023_11_01_13_02 #1 [106170.944361] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [106170.945292] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [106170.945846] RIP: 0010:mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.946413] Code: 89 ef 48 83 05 71 a4 14 00 01 e8 f4 06 04 e1 48 83 05 6c a4 14 00 01 48 83 c4 28 5b 5d 41 5c 41 5d c3 48 83 05 d1 8b 14 00 01 <0f> 0b 48 83 05 d7 8b 14 00 01 e9 96 fe ff ff 48 83 05 a2 90 14 00 [106170.947924] RSP: 0018:ffff88813ff0fcb8 EFLAGS: 00010202 [106170.948397] RAX: 0000000000000000 RBX: ffff88811eabac40 RCX: ffff88811eabad48 [106170.949040] RDX: ffff88811eab8000 RSI: ffffffffa02cd560 RDI: 0000000000000000 [106170.949679] RBP: ffff88811eab8000 R08: 0000000000000001 R09: ffffffffa0229700 [106170.950317] R10: ffff888103538fc0 R11: 0000000000000001 R12: ffff88811eabad58 [106170.950969] R13: ffff888110c01c00 R14: ffff888106b40000 R15: 0000000000000000 [106170.951616] FS: 0000000000000000(0000) GS:ffff88885fd40000(0000) knlGS:0000000000000000 [106170.952329] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [106170.952834] CR2: 00007f1cefd28cb0 CR3: 000000012181b006 CR4: 0000000000370ea0 [106170.953482] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [106170.954121] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [106170.954766] Call Trace: [106170.955057] <TASK> [106170.955315] ? __warn+0x79/0x120 [106170.955648] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.956172] ? report_bug+0x17c/0x190 [106170.956537] ? handle_bug+0x3c/0x60 [106170.956891] ? exc_invalid_op+0x14/0x70 [106170.957264] ? asm_exc_invalid_op+0x16/0x20 [106170.957666] ? mlx5_del_flow_rules+0x10/0x310 [mlx5_core] [106170.958172] ? mlx5_tc_ct_block_flow_offload_add+0x1240/0x1240 [mlx5_core] [106170.958788] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.959339] ? mlx5_tc_ct_del_ft_cb+0xc6/0x2b0 [mlx5_core] [106170.959854] ? mapping_remove+0x154/0x1d0 [mlx5_core] [106170.960342] ? mlx5e_tc_action_miss_mapping_put+0x4f/0x80 [mlx5_core] [106170.960927] mlx5_tc_ct_delete_flow+0x76/0xc0 [mlx5_core] [106170.961441] mlx5_free_flow_attr_actions+0x13b/0x220 [mlx5_core] [106170.962001] mlx5e_tc_del_fdb_flow+0x22c/0x3b0 [mlx5_core] [106170.962524] mlx5e_tc_del_flow+0x95/0x3c0 [mlx5_core] [106170.963034] mlx5e_flow_put+0x73/0xe0 [mlx5_core] [106170.963506] mlx5e_put_flow_list+0x38/0x70 [mlx5_core] [106170.964002] mlx5e_rep_update_flows+0xec/0x290 [mlx5_core] [106170.964525] mlx5e_rep_neigh_update+0x1da/0x310 [mlx5_core] [106170.965056] process_one_work+0x13a/0x2c0 [106170.965443] worker_thread+0x2e5/0x3f0 [106170.965808] ? rescuer_thread+0x410/0x410 [106170.966192] kthread+0xc6/0xf0 [106170.966515] ? kthread_complete_and_exit+0x20/0x20 [106170.966970] ret_from_fork+0x2d/0x50 [106170.967332] ? kthread_complete_and_exit+0x20/0x20 [106170.967774] ret_from_fork_asm+0x11/0x20 [106170.970466] </TASK> [106170.970726] ---[ end trace 0000000000000000 ]--- Fixes: 77ac5e40c44e ("net/sched: act_ct: remove and free nf_table callbacks") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-05 18:25:54 +01:00
net/sched: act_ct: Take per-cb reference to tcf_ct_flow_table The referenced change added custom cleanup code to act_ct to delete any callbacks registered on the parent block when deleting the tcf_ct_flow_table instance. However, the underlying issue is that the drivers don't obtain the reference to the tcf_ct_flow_table instance when registering callbacks which means that not only driver callbacks may still be on the table when deleting it but also that the driver can still have pointers to its internal nf_flowtable and can use it concurrently which results either warning in netfilter[0] or use-after-free. Fix the issue by taking a reference to the underlying struct tcf_ct_flow_table instance when registering the callback and release the reference when unregistering. Expose new API required for such reference counting by adding two new callbacks to nf_flowtable_type and implementing them for act_ct flowtable_ct type. This fixes the issue by extending the lifetime of nf_flowtable until all users have unregistered. [0]: [106170.938634] ------------[ cut here ]------------ [106170.939111] WARNING: CPU: 21 PID: 3688 at include/net/netfilter/nf_flow_table.h:262 mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.940108] Modules linked in: act_ct nf_flow_table act_mirred act_skbedit act_tunnel_key vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa bonding openvswitch nsh rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_regis try overlay mlx5_core [106170.943496] CPU: 21 PID: 3688 Comm: kworker/u48:0 Not tainted 6.6.0-rc7_for_upstream_min_debug_2023_11_01_13_02 #1 [106170.944361] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [106170.945292] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [106170.945846] RIP: 0010:mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.946413] Code: 89 ef 48 83 05 71 a4 14 00 01 e8 f4 06 04 e1 48 83 05 6c a4 14 00 01 48 83 c4 28 5b 5d 41 5c 41 5d c3 48 83 05 d1 8b 14 00 01 <0f> 0b 48 83 05 d7 8b 14 00 01 e9 96 fe ff ff 48 83 05 a2 90 14 00 [106170.947924] RSP: 0018:ffff88813ff0fcb8 EFLAGS: 00010202 [106170.948397] RAX: 0000000000000000 RBX: ffff88811eabac40 RCX: ffff88811eabad48 [106170.949040] RDX: ffff88811eab8000 RSI: ffffffffa02cd560 RDI: 0000000000000000 [106170.949679] RBP: ffff88811eab8000 R08: 0000000000000001 R09: ffffffffa0229700 [106170.950317] R10: ffff888103538fc0 R11: 0000000000000001 R12: ffff88811eabad58 [106170.950969] R13: ffff888110c01c00 R14: ffff888106b40000 R15: 0000000000000000 [106170.951616] FS: 0000000000000000(0000) GS:ffff88885fd40000(0000) knlGS:0000000000000000 [106170.952329] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [106170.952834] CR2: 00007f1cefd28cb0 CR3: 000000012181b006 CR4: 0000000000370ea0 [106170.953482] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [106170.954121] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [106170.954766] Call Trace: [106170.955057] <TASK> [106170.955315] ? __warn+0x79/0x120 [106170.955648] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.956172] ? report_bug+0x17c/0x190 [106170.956537] ? handle_bug+0x3c/0x60 [106170.956891] ? exc_invalid_op+0x14/0x70 [106170.957264] ? asm_exc_invalid_op+0x16/0x20 [106170.957666] ? mlx5_del_flow_rules+0x10/0x310 [mlx5_core] [106170.958172] ? mlx5_tc_ct_block_flow_offload_add+0x1240/0x1240 [mlx5_core] [106170.958788] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.959339] ? mlx5_tc_ct_del_ft_cb+0xc6/0x2b0 [mlx5_core] [106170.959854] ? mapping_remove+0x154/0x1d0 [mlx5_core] [106170.960342] ? mlx5e_tc_action_miss_mapping_put+0x4f/0x80 [mlx5_core] [106170.960927] mlx5_tc_ct_delete_flow+0x76/0xc0 [mlx5_core] [106170.961441] mlx5_free_flow_attr_actions+0x13b/0x220 [mlx5_core] [106170.962001] mlx5e_tc_del_fdb_flow+0x22c/0x3b0 [mlx5_core] [106170.962524] mlx5e_tc_del_flow+0x95/0x3c0 [mlx5_core] [106170.963034] mlx5e_flow_put+0x73/0xe0 [mlx5_core] [106170.963506] mlx5e_put_flow_list+0x38/0x70 [mlx5_core] [106170.964002] mlx5e_rep_update_flows+0xec/0x290 [mlx5_core] [106170.964525] mlx5e_rep_neigh_update+0x1da/0x310 [mlx5_core] [106170.965056] process_one_work+0x13a/0x2c0 [106170.965443] worker_thread+0x2e5/0x3f0 [106170.965808] ? rescuer_thread+0x410/0x410 [106170.966192] kthread+0xc6/0xf0 [106170.966515] ? kthread_complete_and_exit+0x20/0x20 [106170.966970] ret_from_fork+0x2d/0x50 [106170.967332] ? kthread_complete_and_exit+0x20/0x20 [106170.967774] ret_from_fork_asm+0x11/0x20 [106170.970466] </TASK> [106170.970726] ---[ end trace 0000000000000000 ]--- Fixes: 77ac5e40c44e ("net/sched: act_ct: remove and free nf_table callbacks") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-05 18:25:54 +01:00
net/sched: act_ct: offload UDP NEW connections Modify the offload algorithm of UDP connections to the following: - Offload NEW connection as unidirectional. - When connection state changes to ESTABLISHED also update the hardware flow. However, in order to prevent act_ct from spamming offload add wq for every packet coming in reply direction in this state verify whether connection has already been updated to ESTABLISHED in the drivers. If that it the case, then skip flow_table and let conntrack handle such packets which will also allow conntrack to potentially promote the connection to ASSURED. - When connection state changes to ASSURED set the flow_table flow NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload the reply direction. All other protocols have their offload algorithm preserved and are always offloaded as bidirectional. Note that this change tries to minimize the load on flow_table add workqueue. First, it tracks the last ctinfo that was offloaded by using new flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for reply direction packets when the offloads have already been updated with current ctinfo. Second, when 'add' task executes on workqueue it always update the offload with current flow state (by checking 'bidirectional' flow flag and obtaining actual ctinfo/cookie through meta action instead of caching any of these from the moment of scheduling the 'add' work) preventing the need from scheduling more updates if state changed concurrently while the 'add' work was pending on workqueue. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-01 17:30:59 +01:00
net/sched: act_ct: offload UDP NEW connections Modify the offload algorithm of UDP connections to the following: - Offload NEW connection as unidirectional. - When connection state changes to ESTABLISHED also update the hardware flow. However, in order to prevent act_ct from spamming offload add wq for every packet coming in reply direction in this state verify whether connection has already been updated to ESTABLISHED in the drivers. If that it the case, then skip flow_table and let conntrack handle such packets which will also allow conntrack to potentially promote the connection to ASSURED. - When connection state changes to ASSURED set the flow_table flow NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload the reply direction. All other protocols have their offload algorithm preserved and are always offloaded as bidirectional. Note that this change tries to minimize the load on flow_table add workqueue. First, it tracks the last ctinfo that was offloaded by using new flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for reply direction packets when the offloads have already been updated with current ctinfo. Second, when 'add' task executes on workqueue it always update the offload with current flow state (by checking 'bidirectional' flow flag and obtaining actual ctinfo/cookie through meta action instead of caching any of these from the moment of scheduling the 'add' work) preventing the need from scheduling more updates if state changed concurrently while the 'add' work was pending on workqueue. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-01 17:30:59 +01:00
net/sched: act_ct: offload UDP NEW connections Modify the offload algorithm of UDP connections to the following: - Offload NEW connection as unidirectional. - When connection state changes to ESTABLISHED also update the hardware flow. However, in order to prevent act_ct from spamming offload add wq for every packet coming in reply direction in this state verify whether connection has already been updated to ESTABLISHED in the drivers. If that it the case, then skip flow_table and let conntrack handle such packets which will also allow conntrack to potentially promote the connection to ASSURED. - When connection state changes to ASSURED set the flow_table flow NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload the reply direction. All other protocols have their offload algorithm preserved and are always offloaded as bidirectional. Note that this change tries to minimize the load on flow_table add workqueue. First, it tracks the last ctinfo that was offloaded by using new flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for reply direction packets when the offloads have already been updated with current ctinfo. Second, when 'add' task executes on workqueue it always update the offload with current flow state (by checking 'bidirectional' flow flag and obtaining actual ctinfo/cookie through meta action instead of caching any of these from the moment of scheduling the 'add' work) preventing the need from scheduling more updates if state changed concurrently while the 'add' work was pending on workqueue. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-01 17:30:59 +01:00
net/sched: act_ct: offload UDP NEW connections Modify the offload algorithm of UDP connections to the following: - Offload NEW connection as unidirectional. - When connection state changes to ESTABLISHED also update the hardware flow. However, in order to prevent act_ct from spamming offload add wq for every packet coming in reply direction in this state verify whether connection has already been updated to ESTABLISHED in the drivers. If that it the case, then skip flow_table and let conntrack handle such packets which will also allow conntrack to potentially promote the connection to ASSURED. - When connection state changes to ASSURED set the flow_table flow NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload the reply direction. All other protocols have their offload algorithm preserved and are always offloaded as bidirectional. Note that this change tries to minimize the load on flow_table add workqueue. First, it tracks the last ctinfo that was offloaded by using new flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for reply direction packets when the offloads have already been updated with current ctinfo. Second, when 'add' task executes on workqueue it always update the offload with current flow state (by checking 'bidirectional' flow flag and obtaining actual ctinfo/cookie through meta action instead of caching any of these from the moment of scheduling the 'add' work) preventing the need from scheduling more updates if state changed concurrently while the 'add' work was pending on workqueue. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-01 17:30:59 +01:00
net/sched: act_ct: offload UDP NEW connections Modify the offload algorithm of UDP connections to the following: - Offload NEW connection as unidirectional. - When connection state changes to ESTABLISHED also update the hardware flow. However, in order to prevent act_ct from spamming offload add wq for every packet coming in reply direction in this state verify whether connection has already been updated to ESTABLISHED in the drivers. If that it the case, then skip flow_table and let conntrack handle such packets which will also allow conntrack to potentially promote the connection to ASSURED. - When connection state changes to ASSURED set the flow_table flow NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload the reply direction. All other protocols have their offload algorithm preserved and are always offloaded as bidirectional. Note that this change tries to minimize the load on flow_table add workqueue. First, it tracks the last ctinfo that was offloaded by using new flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for reply direction packets when the offloads have already been updated with current ctinfo. Second, when 'add' task executes on workqueue it always update the offload with current flow state (by checking 'bidirectional' flow flag and obtaining actual ctinfo/cookie through meta action instead of caching any of these from the moment of scheduling the 'add' work) preventing the need from scheduling more updates if state changed concurrently while the 'add' work was pending on workqueue. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-01 17:30:59 +01:00
net/sched: act_ct: offload UDP NEW connections Modify the offload algorithm of UDP connections to the following: - Offload NEW connection as unidirectional. - When connection state changes to ESTABLISHED also update the hardware flow. However, in order to prevent act_ct from spamming offload add wq for every packet coming in reply direction in this state verify whether connection has already been updated to ESTABLISHED in the drivers. If that it the case, then skip flow_table and let conntrack handle such packets which will also allow conntrack to potentially promote the connection to ASSURED. - When connection state changes to ASSURED set the flow_table flow NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload the reply direction. All other protocols have their offload algorithm preserved and are always offloaded as bidirectional. Note that this change tries to minimize the load on flow_table add workqueue. First, it tracks the last ctinfo that was offloaded by using new flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for reply direction packets when the offloads have already been updated with current ctinfo. Second, when 'add' task executes on workqueue it always update the offload with current flow state (by checking 'bidirectional' flow flag and obtaining actual ctinfo/cookie through meta action instead of caching any of these from the moment of scheduling the 'add' work) preventing the need from scheduling more updates if state changed concurrently while the 'add' work was pending on workqueue. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-01 17:30:59 +01:00
net/sched: act_ct: offload UDP NEW connections Modify the offload algorithm of UDP connections to the following: - Offload NEW connection as unidirectional. - When connection state changes to ESTABLISHED also update the hardware flow. However, in order to prevent act_ct from spamming offload add wq for every packet coming in reply direction in this state verify whether connection has already been updated to ESTABLISHED in the drivers. If that it the case, then skip flow_table and let conntrack handle such packets which will also allow conntrack to potentially promote the connection to ASSURED. - When connection state changes to ASSURED set the flow_table flow NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload the reply direction. All other protocols have their offload algorithm preserved and are always offloaded as bidirectional. Note that this change tries to minimize the load on flow_table add workqueue. First, it tracks the last ctinfo that was offloaded by using new flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for reply direction packets when the offloads have already been updated with current ctinfo. Second, when 'add' task executes on workqueue it always update the offload with current flow state (by checking 'bidirectional' flow flag and obtaining actual ctinfo/cookie through meta action instead of caching any of these from the moment of scheduling the 'add' work) preventing the need from scheduling more updates if state changed concurrently while the 'add' work was pending on workqueue. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-01 17:30:59 +01:00
net/sched: act_ct: offload UDP NEW connections Modify the offload algorithm of UDP connections to the following: - Offload NEW connection as unidirectional. - When connection state changes to ESTABLISHED also update the hardware flow. However, in order to prevent act_ct from spamming offload add wq for every packet coming in reply direction in this state verify whether connection has already been updated to ESTABLISHED in the drivers. If that it the case, then skip flow_table and let conntrack handle such packets which will also allow conntrack to potentially promote the connection to ASSURED. - When connection state changes to ASSURED set the flow_table flow NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload the reply direction. All other protocols have their offload algorithm preserved and are always offloaded as bidirectional. Note that this change tries to minimize the load on flow_table add workqueue. First, it tracks the last ctinfo that was offloaded by using new flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for reply direction packets when the offloads have already been updated with current ctinfo. Second, when 'add' task executes on workqueue it always update the offload with current flow state (by checking 'bidirectional' flow flag and obtaining actual ctinfo/cookie through meta action instead of caching any of these from the moment of scheduling the 'add' work) preventing the need from scheduling more updates if state changed concurrently while the 'add' work was pending on workqueue. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-01 17:30:59 +01:00
net/sched: act_ct: offload UDP NEW connections Modify the offload algorithm of UDP connections to the following: - Offload NEW connection as unidirectional. - When connection state changes to ESTABLISHED also update the hardware flow. However, in order to prevent act_ct from spamming offload add wq for every packet coming in reply direction in this state verify whether connection has already been updated to ESTABLISHED in the drivers. If that it the case, then skip flow_table and let conntrack handle such packets which will also allow conntrack to potentially promote the connection to ASSURED. - When connection state changes to ASSURED set the flow_table flow NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload the reply direction. All other protocols have their offload algorithm preserved and are always offloaded as bidirectional. Note that this change tries to minimize the load on flow_table add workqueue. First, it tracks the last ctinfo that was offloaded by using new flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for reply direction packets when the offloads have already been updated with current ctinfo. Second, when 'add' task executes on workqueue it always update the offload with current flow state (by checking 'bidirectional' flow flag and obtaining actual ctinfo/cookie through meta action instead of caching any of these from the moment of scheduling the 'add' work) preventing the need from scheduling more updates if state changed concurrently while the 'add' work was pending on workqueue. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-01 17:30:59 +01:00
net/sched: act_ct: offload UDP NEW connections Modify the offload algorithm of UDP connections to the following: - Offload NEW connection as unidirectional. - When connection state changes to ESTABLISHED also update the hardware flow. However, in order to prevent act_ct from spamming offload add wq for every packet coming in reply direction in this state verify whether connection has already been updated to ESTABLISHED in the drivers. If that it the case, then skip flow_table and let conntrack handle such packets which will also allow conntrack to potentially promote the connection to ASSURED. - When connection state changes to ASSURED set the flow_table flow NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload the reply direction. All other protocols have their offload algorithm preserved and are always offloaded as bidirectional. Note that this change tries to minimize the load on flow_table add workqueue. First, it tracks the last ctinfo that was offloaded by using new flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for reply direction packets when the offloads have already been updated with current ctinfo. Second, when 'add' task executes on workqueue it always update the offload with current flow state (by checking 'bidirectional' flow flag and obtaining actual ctinfo/cookie through meta action instead of caching any of these from the moment of scheduling the 'add' work) preventing the need from scheduling more updates if state changed concurrently while the 'add' work was pending on workqueue. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-01 17:30:59 +01:00
net/sched: act_ct: offload UDP NEW connections Modify the offload algorithm of UDP connections to the following: - Offload NEW connection as unidirectional. - When connection state changes to ESTABLISHED also update the hardware flow. However, in order to prevent act_ct from spamming offload add wq for every packet coming in reply direction in this state verify whether connection has already been updated to ESTABLISHED in the drivers. If that it the case, then skip flow_table and let conntrack handle such packets which will also allow conntrack to potentially promote the connection to ASSURED. - When connection state changes to ASSURED set the flow_table flow NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload the reply direction. All other protocols have their offload algorithm preserved and are always offloaded as bidirectional. Note that this change tries to minimize the load on flow_table add workqueue. First, it tracks the last ctinfo that was offloaded by using new flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for reply direction packets when the offloads have already been updated with current ctinfo. Second, when 'add' task executes on workqueue it always update the offload with current flow state (by checking 'bidirectional' flow flag and obtaining actual ctinfo/cookie through meta action instead of caching any of these from the moment of scheduling the 'add' work) preventing the need from scheduling more updates if state changed concurrently while the 'add' work was pending on workqueue. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-01 17:30:59 +01:00
net/sched: act_ct: offload UDP NEW connections Modify the offload algorithm of UDP connections to the following: - Offload NEW connection as unidirectional. - When connection state changes to ESTABLISHED also update the hardware flow. However, in order to prevent act_ct from spamming offload add wq for every packet coming in reply direction in this state verify whether connection has already been updated to ESTABLISHED in the drivers. If that it the case, then skip flow_table and let conntrack handle such packets which will also allow conntrack to potentially promote the connection to ASSURED. - When connection state changes to ASSURED set the flow_table flow NF_FLOW_HW_BIDIRECTIONAL flag which will cause refresh mechanism to offload the reply direction. All other protocols have their offload algorithm preserved and are always offloaded as bidirectional. Note that this change tries to minimize the load on flow_table add workqueue. First, it tracks the last ctinfo that was offloaded by using new flow 'NF_FLOW_HW_ESTABLISHED' flag and doesn't schedule the refresh for reply direction packets when the offloads have already been updated with current ctinfo. Second, when 'add' task executes on workqueue it always update the offload with current flow state (by checking 'bidirectional' flow flag and obtaining actual ctinfo/cookie through meta action instead of caching any of these from the moment of scheduling the 'add' work) preventing the need from scheduling more updates if state changed concurrently while the 'add' work was pending on workqueue. Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-01 17:30:59 +01:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
sched: consistently handle layer3 header accesses in the presence of VLANs There are a couple of places in net/sched/ that check skb->protocol and act on the value there. However, in the presence of VLAN tags, the value stored in skb->protocol can be inconsistent based on whether VLAN acceleration is enabled. The commit quoted in the Fixes tag below fixed the users of skb->protocol to use a helper that will always see the VLAN ethertype. However, most of the callers don't actually handle the VLAN ethertype, but expect to find the IP header type in the protocol field. This means that things like changing the ECN field, or parsing diffserv values, stops working if there's a VLAN tag, or if there are multiple nested VLAN tags (QinQ). To fix this, change the helper to take an argument that indicates whether the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we make sure to skip all of them, so behaviour is consistent even in QinQ mode. To make the helper usable from the ECN code, move it to if_vlan.h instead of pkt_sched.h. v3: - Remove empty lines - Move vlan variable definitions inside loop in skb_protocol() - Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and bpf_skb_ecn_set_ce() v2: - Use eth_type_vlan() helper in skb_protocol() - Also fix code that reads skb->protocol directly - Change a couple of 'if/else if' statements to switch constructs to avoid calling the helper twice Reported-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com> Fixes: d8b9605d2697 ("net: sched: fix skb->protocol use in case of accelerated vlan path") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03 22:26:43 +02:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
2021-03-22 15:13:22 -03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: act_ct: fix skb leak and crash on ooo frags act_ct adds skb->users before defragmentation. If frags arrive in order, the last frag's reference is reset in: inet_frag_reasm_prepare skb_morph which is not straightforward. However when frags arrive out of order, nobody unref the last frag, and all frags are leaked. The situation is even worse, as initiating packet capture can lead to a crash[0] when skb has been cloned and shared at the same time. Fix the issue by removing skb_get() before defragmentation. act_ct returns TC_ACT_CONSUMED when defrag failed or in progress. [0]: [ 843.804823] ------------[ cut here ]------------ [ 843.809659] kernel BUG at net/core/skbuff.c:2091! [ 843.814516] invalid opcode: 0000 [#1] PREEMPT SMP [ 843.819296] CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G S 6.7.0-rc3 #2 [ 843.824107] Hardware name: XFUSION 1288H V6/BC13MBSBD, BIOS 1.29 11/25/2022 [ 843.828953] RIP: 0010:pskb_expand_head+0x2ac/0x300 [ 843.833805] Code: 8b 70 28 48 85 f6 74 82 48 83 c6 08 bf 01 00 00 00 e8 38 bd ff ff 8b 83 c0 00 00 00 48 03 83 c8 00 00 00 e9 62 ff ff ff 0f 0b <0f> 0b e8 8d d0 ff ff e9 b3 fd ff ff 81 7c 24 14 40 01 00 00 4c 89 [ 843.843698] RSP: 0018:ffffc9000cce07c0 EFLAGS: 00010202 [ 843.848524] RAX: 0000000000000002 RBX: ffff88811a211d00 RCX: 0000000000000820 [ 843.853299] RDX: 0000000000000640 RSI: 0000000000000000 RDI: ffff88811a211d00 [ 843.857974] RBP: ffff888127d39518 R08: 00000000bee97314 R09: 0000000000000000 [ 843.862584] R10: 0000000000000000 R11: ffff8881109f0000 R12: 0000000000000880 [ 843.867147] R13: ffff888127d39580 R14: 0000000000000640 R15: ffff888170f7b900 [ 843.871680] FS: 0000000000000000(0000) GS:ffff889ffffc0000(0000) knlGS:0000000000000000 [ 843.876242] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 843.880778] CR2: 00007fa42affcfb8 CR3: 000000011433a002 CR4: 0000000000770ef0 [ 843.885336] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 843.889809] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 843.894229] PKRU: 55555554 [ 843.898539] Call Trace: [ 843.902772] <IRQ> [ 843.906922] ? __die_body+0x1e/0x60 [ 843.911032] ? die+0x3c/0x60 [ 843.915037] ? do_trap+0xe2/0x110 [ 843.918911] ? pskb_expand_head+0x2ac/0x300 [ 843.922687] ? do_error_trap+0x65/0x80 [ 843.926342] ? pskb_expand_head+0x2ac/0x300 [ 843.929905] ? exc_invalid_op+0x50/0x60 [ 843.933398] ? pskb_expand_head+0x2ac/0x300 [ 843.936835] ? asm_exc_invalid_op+0x1a/0x20 [ 843.940226] ? pskb_expand_head+0x2ac/0x300 [ 843.943580] inet_frag_reasm_prepare+0xd1/0x240 [ 843.946904] ip_defrag+0x5d4/0x870 [ 843.950132] nf_ct_handle_fragments+0xec/0x130 [nf_conntrack] [ 843.953334] tcf_ct_act+0x252/0xd90 [act_ct] [ 843.956473] ? tcf_mirred_act+0x516/0x5a0 [act_mirred] [ 843.959657] tcf_action_exec+0xa1/0x160 [ 843.962823] fl_classify+0x1db/0x1f0 [cls_flower] [ 843.966010] ? skb_clone+0x53/0xc0 [ 843.969173] tcf_classify+0x24d/0x420 [ 843.972333] tc_run+0x8f/0xf0 [ 843.975465] __netif_receive_skb_core+0x67a/0x1080 [ 843.978634] ? dev_gro_receive+0x249/0x730 [ 843.981759] __netif_receive_skb_list_core+0x12d/0x260 [ 843.984869] netif_receive_skb_list_internal+0x1cb/0x2f0 [ 843.987957] ? mlx5e_handle_rx_cqe_mpwrq_rep+0xfa/0x1a0 [mlx5_core] [ 843.991170] napi_complete_done+0x72/0x1a0 [ 843.994305] mlx5e_napi_poll+0x28c/0x6d0 [mlx5_core] [ 843.997501] __napi_poll+0x25/0x1b0 [ 844.000627] net_rx_action+0x256/0x330 [ 844.003705] __do_softirq+0xb3/0x29b [ 844.006718] irq_exit_rcu+0x9e/0xc0 [ 844.009672] common_interrupt+0x86/0xa0 [ 844.012537] </IRQ> [ 844.015285] <TASK> [ 844.017937] asm_common_interrupt+0x26/0x40 [ 844.020591] RIP: 0010:acpi_safe_halt+0x1b/0x20 [ 844.023247] Code: ff 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 65 48 8b 04 25 00 18 03 00 48 8b 00 a8 08 75 0c 66 90 0f 00 2d 81 d0 44 00 fb f4 <fa> c3 0f 1f 00 89 fa ec 48 8b 05 ee 88 ed 00 a9 00 00 00 80 75 11 [ 844.028900] RSP: 0018:ffffc90000533e70 EFLAGS: 00000246 [ 844.031725] RAX: 0000000000004000 RBX: 0000000000000001 RCX: 0000000000000000 [ 844.034553] RDX: ffff889ffffc0000 RSI: ffffffff828b7f20 RDI: ffff88a090f45c64 [ 844.037368] RBP: ffff88a0901a2800 R08: ffff88a090f45c00 R09: 00000000000317c0 [ 844.040155] R10: 00ec812281150475 R11: ffff889fffff0e04 R12: ffffffff828b7fa0 [ 844.042962] R13: ffffffff828b7f20 R14: 0000000000000001 R15: 0000000000000000 [ 844.045819] acpi_idle_enter+0x7b/0xc0 [ 844.048621] cpuidle_enter_state+0x7f/0x430 [ 844.051451] cpuidle_enter+0x2d/0x40 [ 844.054279] do_idle+0x1d4/0x240 [ 844.057096] cpu_startup_entry+0x2a/0x30 [ 844.059934] start_secondary+0x104/0x130 [ 844.062787] secondary_startup_64_no_verify+0x16b/0x16b [ 844.065674] </TASK> Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Tao Liu <taoliu828@163.com> Link: https://lore.kernel.org/r/20231228081457.936732-1-taoliu828@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-28 16:14:57 +08:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Fix UAF when resolving a clash KASAN reports the following UAF: BUG: KASAN: slab-use-after-free in tcf_ct_flow_table_process_conn+0x12b/0x380 [act_ct] Read of size 1 at addr ffff888c07603600 by task handler130/6469 Call Trace: <IRQ> dump_stack_lvl+0x48/0x70 print_address_description.constprop.0+0x33/0x3d0 print_report+0xc0/0x2b0 kasan_report+0xd0/0x120 __asan_load1+0x6c/0x80 tcf_ct_flow_table_process_conn+0x12b/0x380 [act_ct] tcf_ct_act+0x886/0x1350 [act_ct] tcf_action_exec+0xf8/0x1f0 fl_classify+0x355/0x360 [cls_flower] __tcf_classify+0x1fd/0x330 tcf_classify+0x21c/0x3c0 sch_handle_ingress.constprop.0+0x2c5/0x500 __netif_receive_skb_core.constprop.0+0xb25/0x1510 __netif_receive_skb_list_core+0x220/0x4c0 netif_receive_skb_list_internal+0x446/0x620 napi_complete_done+0x157/0x3d0 gro_cell_poll+0xcf/0x100 __napi_poll+0x65/0x310 net_rx_action+0x30c/0x5c0 __do_softirq+0x14f/0x491 __irq_exit_rcu+0x82/0xc0 irq_exit_rcu+0xe/0x20 common_interrupt+0xa1/0xb0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 Allocated by task 6469: kasan_save_stack+0x38/0x70 kasan_set_track+0x25/0x40 kasan_save_alloc_info+0x1e/0x40 __kasan_krealloc+0x133/0x190 krealloc+0xaa/0x130 nf_ct_ext_add+0xed/0x230 [nf_conntrack] tcf_ct_act+0x1095/0x1350 [act_ct] tcf_action_exec+0xf8/0x1f0 fl_classify+0x355/0x360 [cls_flower] __tcf_classify+0x1fd/0x330 tcf_classify+0x21c/0x3c0 sch_handle_ingress.constprop.0+0x2c5/0x500 __netif_receive_skb_core.constprop.0+0xb25/0x1510 __netif_receive_skb_list_core+0x220/0x4c0 netif_receive_skb_list_internal+0x446/0x620 napi_complete_done+0x157/0x3d0 gro_cell_poll+0xcf/0x100 __napi_poll+0x65/0x310 net_rx_action+0x30c/0x5c0 __do_softirq+0x14f/0x491 Freed by task 6469: kasan_save_stack+0x38/0x70 kasan_set_track+0x25/0x40 kasan_save_free_info+0x2b/0x60 ____kasan_slab_free+0x180/0x1f0 __kasan_slab_free+0x12/0x30 slab_free_freelist_hook+0xd2/0x1a0 __kmem_cache_free+0x1a2/0x2f0 kfree+0x78/0x120 nf_conntrack_free+0x74/0x130 [nf_conntrack] nf_ct_destroy+0xb2/0x140 [nf_conntrack] __nf_ct_resolve_clash+0x529/0x5d0 [nf_conntrack] nf_ct_resolve_clash+0xf6/0x490 [nf_conntrack] __nf_conntrack_confirm+0x2c6/0x770 [nf_conntrack] tcf_ct_act+0x12ad/0x1350 [act_ct] tcf_action_exec+0xf8/0x1f0 fl_classify+0x355/0x360 [cls_flower] __tcf_classify+0x1fd/0x330 tcf_classify+0x21c/0x3c0 sch_handle_ingress.constprop.0+0x2c5/0x500 __netif_receive_skb_core.constprop.0+0xb25/0x1510 __netif_receive_skb_list_core+0x220/0x4c0 netif_receive_skb_list_internal+0x446/0x620 napi_complete_done+0x157/0x3d0 gro_cell_poll+0xcf/0x100 __napi_poll+0x65/0x310 net_rx_action+0x30c/0x5c0 __do_softirq+0x14f/0x491 The ct may be dropped if a clash has been resolved but is still passed to the tcf_ct_flow_table_process_conn function for further usage. This issue can be fixed by retrieving ct from skb again after confirming conntrack. Fixes: 0cc254e5aa37 ("net/sched: act_ct: Offload connections with commit action") Co-developed-by: Gerald Yang <gerald.yang@canonical.com> Signed-off-by: Gerald Yang <gerald.yang@canonical.com> Signed-off-by: Chengen Du <chengen.du@canonical.com> Link: https://patch.msgid.link/20240710053747.13223-1-chengen.du@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-10 13:37:47 +08:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
2021-03-22 15:13:22 -03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: act_ct: fix skb leak and crash on ooo frags act_ct adds skb->users before defragmentation. If frags arrive in order, the last frag's reference is reset in: inet_frag_reasm_prepare skb_morph which is not straightforward. However when frags arrive out of order, nobody unref the last frag, and all frags are leaked. The situation is even worse, as initiating packet capture can lead to a crash[0] when skb has been cloned and shared at the same time. Fix the issue by removing skb_get() before defragmentation. act_ct returns TC_ACT_CONSUMED when defrag failed or in progress. [0]: [ 843.804823] ------------[ cut here ]------------ [ 843.809659] kernel BUG at net/core/skbuff.c:2091! [ 843.814516] invalid opcode: 0000 [#1] PREEMPT SMP [ 843.819296] CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G S 6.7.0-rc3 #2 [ 843.824107] Hardware name: XFUSION 1288H V6/BC13MBSBD, BIOS 1.29 11/25/2022 [ 843.828953] RIP: 0010:pskb_expand_head+0x2ac/0x300 [ 843.833805] Code: 8b 70 28 48 85 f6 74 82 48 83 c6 08 bf 01 00 00 00 e8 38 bd ff ff 8b 83 c0 00 00 00 48 03 83 c8 00 00 00 e9 62 ff ff ff 0f 0b <0f> 0b e8 8d d0 ff ff e9 b3 fd ff ff 81 7c 24 14 40 01 00 00 4c 89 [ 843.843698] RSP: 0018:ffffc9000cce07c0 EFLAGS: 00010202 [ 843.848524] RAX: 0000000000000002 RBX: ffff88811a211d00 RCX: 0000000000000820 [ 843.853299] RDX: 0000000000000640 RSI: 0000000000000000 RDI: ffff88811a211d00 [ 843.857974] RBP: ffff888127d39518 R08: 00000000bee97314 R09: 0000000000000000 [ 843.862584] R10: 0000000000000000 R11: ffff8881109f0000 R12: 0000000000000880 [ 843.867147] R13: ffff888127d39580 R14: 0000000000000640 R15: ffff888170f7b900 [ 843.871680] FS: 0000000000000000(0000) GS:ffff889ffffc0000(0000) knlGS:0000000000000000 [ 843.876242] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 843.880778] CR2: 00007fa42affcfb8 CR3: 000000011433a002 CR4: 0000000000770ef0 [ 843.885336] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 843.889809] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 843.894229] PKRU: 55555554 [ 843.898539] Call Trace: [ 843.902772] <IRQ> [ 843.906922] ? __die_body+0x1e/0x60 [ 843.911032] ? die+0x3c/0x60 [ 843.915037] ? do_trap+0xe2/0x110 [ 843.918911] ? pskb_expand_head+0x2ac/0x300 [ 843.922687] ? do_error_trap+0x65/0x80 [ 843.926342] ? pskb_expand_head+0x2ac/0x300 [ 843.929905] ? exc_invalid_op+0x50/0x60 [ 843.933398] ? pskb_expand_head+0x2ac/0x300 [ 843.936835] ? asm_exc_invalid_op+0x1a/0x20 [ 843.940226] ? pskb_expand_head+0x2ac/0x300 [ 843.943580] inet_frag_reasm_prepare+0xd1/0x240 [ 843.946904] ip_defrag+0x5d4/0x870 [ 843.950132] nf_ct_handle_fragments+0xec/0x130 [nf_conntrack] [ 843.953334] tcf_ct_act+0x252/0xd90 [act_ct] [ 843.956473] ? tcf_mirred_act+0x516/0x5a0 [act_mirred] [ 843.959657] tcf_action_exec+0xa1/0x160 [ 843.962823] fl_classify+0x1db/0x1f0 [cls_flower] [ 843.966010] ? skb_clone+0x53/0xc0 [ 843.969173] tcf_classify+0x24d/0x420 [ 843.972333] tc_run+0x8f/0xf0 [ 843.975465] __netif_receive_skb_core+0x67a/0x1080 [ 843.978634] ? dev_gro_receive+0x249/0x730 [ 843.981759] __netif_receive_skb_list_core+0x12d/0x260 [ 843.984869] netif_receive_skb_list_internal+0x1cb/0x2f0 [ 843.987957] ? mlx5e_handle_rx_cqe_mpwrq_rep+0xfa/0x1a0 [mlx5_core] [ 843.991170] napi_complete_done+0x72/0x1a0 [ 843.994305] mlx5e_napi_poll+0x28c/0x6d0 [mlx5_core] [ 843.997501] __napi_poll+0x25/0x1b0 [ 844.000627] net_rx_action+0x256/0x330 [ 844.003705] __do_softirq+0xb3/0x29b [ 844.006718] irq_exit_rcu+0x9e/0xc0 [ 844.009672] common_interrupt+0x86/0xa0 [ 844.012537] </IRQ> [ 844.015285] <TASK> [ 844.017937] asm_common_interrupt+0x26/0x40 [ 844.020591] RIP: 0010:acpi_safe_halt+0x1b/0x20 [ 844.023247] Code: ff 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 65 48 8b 04 25 00 18 03 00 48 8b 00 a8 08 75 0c 66 90 0f 00 2d 81 d0 44 00 fb f4 <fa> c3 0f 1f 00 89 fa ec 48 8b 05 ee 88 ed 00 a9 00 00 00 80 75 11 [ 844.028900] RSP: 0018:ffffc90000533e70 EFLAGS: 00000246 [ 844.031725] RAX: 0000000000004000 RBX: 0000000000000001 RCX: 0000000000000000 [ 844.034553] RDX: ffff889ffffc0000 RSI: ffffffff828b7f20 RDI: ffff88a090f45c64 [ 844.037368] RBP: ffff88a0901a2800 R08: ffff88a090f45c00 R09: 00000000000317c0 [ 844.040155] R10: 00ec812281150475 R11: ffff889fffff0e04 R12: ffffffff828b7fa0 [ 844.042962] R13: ffffffff828b7f20 R14: 0000000000000001 R15: 0000000000000000 [ 844.045819] acpi_idle_enter+0x7b/0xc0 [ 844.048621] cpuidle_enter_state+0x7f/0x430 [ 844.051451] cpuidle_enter+0x2d/0x40 [ 844.054279] do_idle+0x1d4/0x240 [ 844.057096] cpu_startup_entry+0x2a/0x30 [ 844.059934] start_secondary+0x104/0x130 [ 844.062787] secondary_startup_64_no_verify+0x16b/0x16b [ 844.065674] </TASK> Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Tao Liu <taoliu828@163.com> Link: https://lore.kernel.org/r/20231228081457.936732-1-taoliu828@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-28 16:14:57 +08:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net: sched: set IPS_CONFIRMED in tmpl status only when commit is set in act_ct With the following flows, the packets will be dropped if OVS TC offload is enabled. 'ip,ct_state=-trk,in_port=1 actions=ct(zone=1)' 'ip,ct_state=+trk+new+rel,in_port=1 actions=ct(commit,zone=1)' 'ip,ct_state=+trk+new+rel,in_port=1 actions=ct(commit,zone=2),normal' In the 1st flow, it finds the exp from the hashtable and removes it then creates the ct with this exp in act_ct. However, in the 2nd flow it goes to the OVS upcall at the 1st time. When the skb comes back from userspace, it has to create the ct again without exp(the exp was removed last time). With no 'rel' set in the ct, the 3rd flow can never get matched. In OVS conntrack, it works around it by adding its own exp lookup function ovs_ct_expect_find() where it doesn't remove the exp. Instead of creating a real ct, it only updates its keys with the exp and its master info. So when the skb comes back, the exp is still in the hashtable. However, we can't do this trick in act_ct, as tc flower match is using a real ct, and passing the exp and its master info to flower parsing via tc_skb_cb is also not possible (tc_skb_cb size is not big enough). The simple and clear fix is to not remove the exp at the 1st flow, namely, not set IPS_CONFIRMED in tmpl when commit is not set in act_ct. Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Aaron Conole <aconole@redhat.com> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-16 17:09:18 -04:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Add module aliases for cls_,sch_,act_ modules No functional change intended, aliases will be used in followup commits. Note for backporters: you may need to add aliases also for modules that are already removed in mainline kernel but still in your version. Patches were generated with the help of Coccinelle scripts like: cat >scripts/coccinelle/misc/tcf_alias.cocci <<EOD virtual patch virtual report @ haskernel @ @@ @ tcf_has_kind depends on report && haskernel @ identifier ops; constant K; @@ static struct tcf_proto_ops ops = { .kind = K, ... }; +char module_alias = K; EOD /usr/bin/spatch -D report --cocci-file scripts/coccinelle/misc/tcf_alias.cocci \ --dir . \ -I ./arch/x86/include -I ./arch/x86/include/generated -I ./include \ -I ./arch/x86/include/uapi -I ./arch/x86/include/generated/uapi \ -I ./include/uapi -I ./include/generated/uapi \ --include ./include/linux/compiler-version.h --include ./include/linux/kconfig.h \ --jobs 8 --chunksize 1 2>/dev/null | \ sed 's/char module_alias = "\([^"]*\)";/MODULE_ALIAS_NET_CLS("\1");/' And analogously for: static struct tc_action_ops ops = { .kind = K, static struct Qdisc_ops ops = { .id = K, (Someone familiar would be able to fit those into one .cocci file without sed post processing.) Signed-off-by: Michal Koutný <mkoutny@suse.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240201130943.19536-3-mkoutny@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01 14:09:41 +01:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00
net/sched: Introduce action ct Allow sending a packet to conntrack module for connection tracking. The packet will be marked with conntrack connection's state, and any metadata such as conntrack mark and label. This state metadata can later be matched against with tc classifers, for example with the flower classifier as below. In addition to committing new connections the user can optionally specific a zone to track within, set a mark/label and configure nat with an address range and port range. Usage is as follows: $ tc qdisc add dev ens1f0_0 ingress $ tc qdisc add dev ens1f0_1 ingress $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 2 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_state +trk+new \ action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_0 ingress \ prio 1 chain 2 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 0 proto ip \ flower ip_proto tcp ct_state -trk \ action ct zone 2 pipe \ action goto chain 1 $ tc filter add dev ens1f0_1 ingress \ prio 1 chain 1 proto ip \ flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \ action ct nat pipe \ action mirred egress redirect dev ens1f0_0 Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Changelog: V5->V6: Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case V4->V5: Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached() V3->V4: Added strict_start_type for act_ct policy V2->V3: Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c V1->V2: Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max Refactored NAT_PORT_MIN_MAX range handling as well Added ipv4/ipv6 defragmentation Removed extra skb pull push of nw offset in exectute nat Refactored tcf_ct_skb_network_trim after pull Removed TCA_ACT_CT define Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 10:30:48 +03:00