linux/sound/core/pcm_memory.c

501 lines
15 KiB

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
ALSA: memalloc: Support for non-contiguous page allocation This patch adds the support for allocation of non-contiguous DMA pages in the common memalloc helper. It's another SG-buffer type, but unlike the existing one, this is directional and requires the explicit sync / invalidation of dirty pages on non-coherent architectures. For this enhancement, the following points are changed: - snd_dma_device stores the DMA direction. - snd_dma_device stores need_sync flag indicating whether the explicit sync is required or not. - A new variant of helper functions, snd_dma_alloc_dir_pages() and *_all() are introduced; the old snd_dma_alloc_pages() and *_all() kept as just wrappers with DMA_BIDIRECTIONAL. - A new helper snd_dma_buffer_sync() is introduced; this gets called in the appropriate places. - A new allocation type, SNDRV_DMA_TYPE_NONCONTIG, is introduced. When the driver allocates pages with this new type, and it may require the SNDRV_PCM_INFO_EXPLICIT_SYNC flag set to the PCM hardware.info for taking the full control of PCM applptr and hwptr changes (that implies disabling the mmap of control/status data). When the buffer allocation is managed by snd_pcm_set_managed_buffer(), this flag is automatically set depending on the result of dma_need_sync() internally. Otherwise, if the buffer is managed manually, the driver has to set the flag explicitly, too. The explicit sync between CPU and device for non-coherent memory is performed at the points before and after read/write transfer as well as the applptr/hwptr syncptr ioctl. In the case of mmap mode, user-space is supposed to call the syncptr ioctl with the hwptr flag to update and fetch the status at first; this corresponds to CPU-sync. Then user-space advances the applptr via syncptr ioctl again with applptr flag, and this corresponds to the device sync with flushing. Other than the DMA direction and the explicit sync, the usage of this new buffer type is almost equivalent with the existing SNDRV_DMA_TYPE_DEV_SG; you can get the page and the address via snd_sgbuf_get_page() and snd_sgbuf_get_addr(), also calculate the continuous pages via snd_sgbuf_get_chunk_size(). For those SG-page handling, the non-contig type shares the same ops with the vmalloc handler. As we do always vmap the SG pages at first, the actual address can be deduced from the vmapped address easily without iterating the SG-list. Link: https://lore.kernel.org/r/20211017074859.24112-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-17 09:48:57 +02:00
ALSA: memalloc: Support for non-contiguous page allocation This patch adds the support for allocation of non-contiguous DMA pages in the common memalloc helper. It's another SG-buffer type, but unlike the existing one, this is directional and requires the explicit sync / invalidation of dirty pages on non-coherent architectures. For this enhancement, the following points are changed: - snd_dma_device stores the DMA direction. - snd_dma_device stores need_sync flag indicating whether the explicit sync is required or not. - A new variant of helper functions, snd_dma_alloc_dir_pages() and *_all() are introduced; the old snd_dma_alloc_pages() and *_all() kept as just wrappers with DMA_BIDIRECTIONAL. - A new helper snd_dma_buffer_sync() is introduced; this gets called in the appropriate places. - A new allocation type, SNDRV_DMA_TYPE_NONCONTIG, is introduced. When the driver allocates pages with this new type, and it may require the SNDRV_PCM_INFO_EXPLICIT_SYNC flag set to the PCM hardware.info for taking the full control of PCM applptr and hwptr changes (that implies disabling the mmap of control/status data). When the buffer allocation is managed by snd_pcm_set_managed_buffer(), this flag is automatically set depending on the result of dma_need_sync() internally. Otherwise, if the buffer is managed manually, the driver has to set the flag explicitly, too. The explicit sync between CPU and device for non-coherent memory is performed at the points before and after read/write transfer as well as the applptr/hwptr syncptr ioctl. In the case of mmap mode, user-space is supposed to call the syncptr ioctl with the hwptr flag to update and fetch the status at first; this corresponds to CPU-sync. Then user-space advances the applptr via syncptr ioctl again with applptr flag, and this corresponds to the device sync with flushing. Other than the DMA direction and the explicit sync, the usage of this new buffer type is almost equivalent with the existing SNDRV_DMA_TYPE_DEV_SG; you can get the page and the address via snd_sgbuf_get_page() and snd_sgbuf_get_addr(), also calculate the continuous pages via snd_sgbuf_get_chunk_size(). For those SG-page handling, the non-contig type shares the same ops with the vmalloc handler. As we do always vmap the SG pages at first, the actual address can be deduced from the vmapped address easily without iterating the SG-list. Link: https://lore.kernel.org/r/20211017074859.24112-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-17 09:48:57 +02:00
ALSA: memalloc: Support for non-contiguous page allocation This patch adds the support for allocation of non-contiguous DMA pages in the common memalloc helper. It's another SG-buffer type, but unlike the existing one, this is directional and requires the explicit sync / invalidation of dirty pages on non-coherent architectures. For this enhancement, the following points are changed: - snd_dma_device stores the DMA direction. - snd_dma_device stores need_sync flag indicating whether the explicit sync is required or not. - A new variant of helper functions, snd_dma_alloc_dir_pages() and *_all() are introduced; the old snd_dma_alloc_pages() and *_all() kept as just wrappers with DMA_BIDIRECTIONAL. - A new helper snd_dma_buffer_sync() is introduced; this gets called in the appropriate places. - A new allocation type, SNDRV_DMA_TYPE_NONCONTIG, is introduced. When the driver allocates pages with this new type, and it may require the SNDRV_PCM_INFO_EXPLICIT_SYNC flag set to the PCM hardware.info for taking the full control of PCM applptr and hwptr changes (that implies disabling the mmap of control/status data). When the buffer allocation is managed by snd_pcm_set_managed_buffer(), this flag is automatically set depending on the result of dma_need_sync() internally. Otherwise, if the buffer is managed manually, the driver has to set the flag explicitly, too. The explicit sync between CPU and device for non-coherent memory is performed at the points before and after read/write transfer as well as the applptr/hwptr syncptr ioctl. In the case of mmap mode, user-space is supposed to call the syncptr ioctl with the hwptr flag to update and fetch the status at first; this corresponds to CPU-sync. Then user-space advances the applptr via syncptr ioctl again with applptr flag, and this corresponds to the device sync with flushing. Other than the DMA direction and the explicit sync, the usage of this new buffer type is almost equivalent with the existing SNDRV_DMA_TYPE_DEV_SG; you can get the page and the address via snd_sgbuf_get_page() and snd_sgbuf_get_addr(), also calculate the continuous pages via snd_sgbuf_get_chunk_size(). For those SG-page handling, the non-contig type shares the same ops with the vmalloc handler. As we do always vmap the SG pages at first, the actual address can be deduced from the vmapped address easily without iterating the SG-list. Link: https://lore.kernel.org/r/20211017074859.24112-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-17 09:48:57 +02:00
ALSA: memalloc: Support for non-contiguous page allocation This patch adds the support for allocation of non-contiguous DMA pages in the common memalloc helper. It's another SG-buffer type, but unlike the existing one, this is directional and requires the explicit sync / invalidation of dirty pages on non-coherent architectures. For this enhancement, the following points are changed: - snd_dma_device stores the DMA direction. - snd_dma_device stores need_sync flag indicating whether the explicit sync is required or not. - A new variant of helper functions, snd_dma_alloc_dir_pages() and *_all() are introduced; the old snd_dma_alloc_pages() and *_all() kept as just wrappers with DMA_BIDIRECTIONAL. - A new helper snd_dma_buffer_sync() is introduced; this gets called in the appropriate places. - A new allocation type, SNDRV_DMA_TYPE_NONCONTIG, is introduced. When the driver allocates pages with this new type, and it may require the SNDRV_PCM_INFO_EXPLICIT_SYNC flag set to the PCM hardware.info for taking the full control of PCM applptr and hwptr changes (that implies disabling the mmap of control/status data). When the buffer allocation is managed by snd_pcm_set_managed_buffer(), this flag is automatically set depending on the result of dma_need_sync() internally. Otherwise, if the buffer is managed manually, the driver has to set the flag explicitly, too. The explicit sync between CPU and device for non-coherent memory is performed at the points before and after read/write transfer as well as the applptr/hwptr syncptr ioctl. In the case of mmap mode, user-space is supposed to call the syncptr ioctl with the hwptr flag to update and fetch the status at first; this corresponds to CPU-sync. Then user-space advances the applptr via syncptr ioctl again with applptr flag, and this corresponds to the device sync with flushing. Other than the DMA direction and the explicit sync, the usage of this new buffer type is almost equivalent with the existing SNDRV_DMA_TYPE_DEV_SG; you can get the page and the address via snd_sgbuf_get_page() and snd_sgbuf_get_addr(), also calculate the continuous pages via snd_sgbuf_get_chunk_size(). For those SG-page handling, the non-contig type shares the same ops with the vmalloc handler. As we do always vmap the SG pages at first, the actual address can be deduced from the vmapped address easily without iterating the SG-list. Link: https://lore.kernel.org/r/20211017074859.24112-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-17 09:48:57 +02:00
ALSA: memalloc: Support for non-contiguous page allocation This patch adds the support for allocation of non-contiguous DMA pages in the common memalloc helper. It's another SG-buffer type, but unlike the existing one, this is directional and requires the explicit sync / invalidation of dirty pages on non-coherent architectures. For this enhancement, the following points are changed: - snd_dma_device stores the DMA direction. - snd_dma_device stores need_sync flag indicating whether the explicit sync is required or not. - A new variant of helper functions, snd_dma_alloc_dir_pages() and *_all() are introduced; the old snd_dma_alloc_pages() and *_all() kept as just wrappers with DMA_BIDIRECTIONAL. - A new helper snd_dma_buffer_sync() is introduced; this gets called in the appropriate places. - A new allocation type, SNDRV_DMA_TYPE_NONCONTIG, is introduced. When the driver allocates pages with this new type, and it may require the SNDRV_PCM_INFO_EXPLICIT_SYNC flag set to the PCM hardware.info for taking the full control of PCM applptr and hwptr changes (that implies disabling the mmap of control/status data). When the buffer allocation is managed by snd_pcm_set_managed_buffer(), this flag is automatically set depending on the result of dma_need_sync() internally. Otherwise, if the buffer is managed manually, the driver has to set the flag explicitly, too. The explicit sync between CPU and device for non-coherent memory is performed at the points before and after read/write transfer as well as the applptr/hwptr syncptr ioctl. In the case of mmap mode, user-space is supposed to call the syncptr ioctl with the hwptr flag to update and fetch the status at first; this corresponds to CPU-sync. Then user-space advances the applptr via syncptr ioctl again with applptr flag, and this corresponds to the device sync with flushing. Other than the DMA direction and the explicit sync, the usage of this new buffer type is almost equivalent with the existing SNDRV_DMA_TYPE_DEV_SG; you can get the page and the address via snd_sgbuf_get_page() and snd_sgbuf_get_addr(), also calculate the continuous pages via snd_sgbuf_get_chunk_size(). For those SG-page handling, the non-contig type shares the same ops with the vmalloc handler. As we do always vmap the SG pages at first, the actual address can be deduced from the vmapped address easily without iterating the SG-list. Link: https://lore.kernel.org/r/20211017074859.24112-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-17 09:48:57 +02:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: pcm: Introduce managed buffer allocation mode This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-17 09:53:01 +01:00
ALSA: memalloc: Support for non-contiguous page allocation This patch adds the support for allocation of non-contiguous DMA pages in the common memalloc helper. It's another SG-buffer type, but unlike the existing one, this is directional and requires the explicit sync / invalidation of dirty pages on non-coherent architectures. For this enhancement, the following points are changed: - snd_dma_device stores the DMA direction. - snd_dma_device stores need_sync flag indicating whether the explicit sync is required or not. - A new variant of helper functions, snd_dma_alloc_dir_pages() and *_all() are introduced; the old snd_dma_alloc_pages() and *_all() kept as just wrappers with DMA_BIDIRECTIONAL. - A new helper snd_dma_buffer_sync() is introduced; this gets called in the appropriate places. - A new allocation type, SNDRV_DMA_TYPE_NONCONTIG, is introduced. When the driver allocates pages with this new type, and it may require the SNDRV_PCM_INFO_EXPLICIT_SYNC flag set to the PCM hardware.info for taking the full control of PCM applptr and hwptr changes (that implies disabling the mmap of control/status data). When the buffer allocation is managed by snd_pcm_set_managed_buffer(), this flag is automatically set depending on the result of dma_need_sync() internally. Otherwise, if the buffer is managed manually, the driver has to set the flag explicitly, too. The explicit sync between CPU and device for non-coherent memory is performed at the points before and after read/write transfer as well as the applptr/hwptr syncptr ioctl. In the case of mmap mode, user-space is supposed to call the syncptr ioctl with the hwptr flag to update and fetch the status at first; this corresponds to CPU-sync. Then user-space advances the applptr via syncptr ioctl again with applptr flag, and this corresponds to the device sync with flushing. Other than the DMA direction and the explicit sync, the usage of this new buffer type is almost equivalent with the existing SNDRV_DMA_TYPE_DEV_SG; you can get the page and the address via snd_sgbuf_get_page() and snd_sgbuf_get_addr(), also calculate the continuous pages via snd_sgbuf_get_chunk_size(). For those SG-page handling, the non-contig type shares the same ops with the vmalloc handler. As we do always vmap the SG pages at first, the actual address can be deduced from the vmapped address easily without iterating the SG-list. Link: https://lore.kernel.org/r/20211017074859.24112-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-17 09:48:57 +02:00