linux/include/linux/device.h

628 lines
20 KiB

Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 17:33:36 +01:00
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 17:33:36 +01:00
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 17:33:36 +01:00
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 17:33:36 +01:00
Driver core: udev triggered device-<>driver binding We get two per-bus sysfs files: ls-l /sys/subsystem/usb drwxr-xr-x 2 root root 0 2007-02-16 16:42 devices drwxr-xr-x 7 root root 0 2007-02-16 14:55 drivers -rw-r--r-- 1 root root 4096 2007-02-16 16:42 drivers_autoprobe --w------- 1 root root 4096 2007-02-16 16:42 drivers_probe The flag "drivers_autoprobe" controls the behavior of the bus to bind devices by default, or just initialize the device and leave it alone. The command "drivers_probe" accepts a bus_id and the bus tries to bind a driver to this device. Systems who want to control the driver binding with udev, switch off the bus initiated probing: echo 0 > /sys/subsystem/usb/drivers_autoprobe echo 0 > /sys/subsystem/pcmcia/drivers_autoprobe ... and initiate the probing with udev rules like: ACTION=="add", SUBSYSTEM=="usb", ATTR{subsystem/drivers_probe}="$kernel" ACTION=="add", SUBSYSTEM=="pcmcia", ATTR{subsystem/drivers_probe}="$kernel" ... Custom driver binding can happen in earlier rules by something like: ACTION=="add", SUBSYSTEM=="usb", \ ATTRS{idVendor}=="1234", ATTRS{idProduct}=="5678" \ ATTR{subsystem/drivers/<custom-driver>/bind}="$kernel" This is intended to solve the modprobe.conf mess with "install-rules", custom bind/unbind-scripts and all the weird things people invented over the years. It should also provide the functionality "libusual" was supposed to do. With udev, one can just write a udev rule to drive all USB-disks at the third port of USB-hub by the "ub" driver, and everything else by usb-storage. One can also instruct udev to bind different wireless drivers to identical cards - just selected by the pcmcia slot-number, and whatever ... To use the mentioned rules, it needs udev version 106, to be able to write ATTR{}="$kernel" to sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 17:33:36 +01:00
Introduce new top level suspend and hibernation callbacks Introduce 'struct pm_ops' and 'struct pm_ext_ops' ('ext' meaning 'extended') representing suspend and hibernation operations for bus types, device classes, device types and device drivers. Modify the PM core to use 'struct pm_ops' and 'struct pm_ext_ops' objects, if defined, instead of the ->suspend(), ->resume(), ->suspend_late(), and ->resume_early() callbacks (the old callbacks will be considered as legacy and gradually phased out). The main purpose of doing this is to separate suspend (aka S2RAM and standby) callbacks from hibernation callbacks in such a way that the new callbacks won't take arguments and the semantics of each of them will be clearly specified. This has been requested for multiple times by many people, including Linus himself, and the reason is that within the current scheme if ->resume() is called, for example, it's difficult to say why it's been called (ie. is it a resume from RAM or from hibernation or a suspend/hibernation failure etc.?). The second purpose is to make the suspend/hibernation callbacks more flexible so that device drivers can handle more than they can within the current scheme. For example, some drivers may need to prevent new children of the device from being registered before their ->suspend() callbacks are executed or they may want to carry out some operations requiring the availability of some other devices, not directly bound via the parent-child relationship, in order to prepare for the execution of ->suspend(), etc. Ultimately, we'd like to stop using the freezing of tasks for suspend and therefore the drivers' suspend/hibernation code will have to take care of the handling of the user space during suspend/hibernation. That, in turn, would be difficult within the current scheme, without the new ->prepare() and ->complete() callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-20 23:00:01 +02:00
Driver core: add notification of bus events I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-25 13:44:59 +10:00
Driver core: add notification of bus events I finally did as you suggested and added the notifier to the struct bus_type itself. There are still problems to be expected is something attaches to a bus type where the code can hook in different struct device sub-classes (which is imho a big bogosity but I won't even try to argue that case now) but it will solve nicely a number of issues I've had so far. That also means that clients interested in registering for such notifications have to do it before devices are added and after bus types are registered. Fortunately, most bus types that matter for the various usage scenarios I have in mind are registerd at postcore_initcall time, which means I have a really nice spot at arch_initcall time to add my notifiers. There are 4 notifications provided. Device being added (before hooked to the bus) and removed (failure of previous case or after being unhooked from the bus), along with driver being bound to a device and about to be unbound. The usage I have for these are: - The 2 first ones are used to maintain a struct device_ext that is hooked to struct device.firmware_data. This structure contains for now a pointer to the Open Firmware node related to the device (if any), the NUMA node ID (for quick access to it) and the DMA operations pointers & iommu table instance for DMA to/from this device. For bus types I own (like IBM VIO or EBUS), I just maintain that structure directly from the bus code when creating the devices. But for bus types managed by generic code like PCI or platform (actually, of_platform which is a variation of platform linked to Open Firmware device-tree), I need this notifier. - The other two ones have a completely different usage scenario. I have cases where multiple devices and their drivers depend on each other. For example, the IBM EMAC network driver needs to attach to a MAL DMA engine which is a separate device, and a PHY interface which is also a separate device. They are all of_platform_device's (well, about to be with my upcoming patches) but there is no say in what precise order the core will "probe" them and instanciate the various modules. The solution I found for that is to have the drivers for emac to use multithread_probe, and wait for a driver to be bound to the target MAL and PHY control devices (the device-tree contains reference to the MAL and PHY interface nodes, which I can then match to of_platform_devices). Right now, I've been polling, but with that notifier, I can more cleanly wait (with a timeout of course). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-25 13:44:59 +10:00
Introduce new top level suspend and hibernation callbacks Introduce 'struct pm_ops' and 'struct pm_ext_ops' ('ext' meaning 'extended') representing suspend and hibernation operations for bus types, device classes, device types and device drivers. Modify the PM core to use 'struct pm_ops' and 'struct pm_ext_ops' objects, if defined, instead of the ->suspend(), ->resume(), ->suspend_late(), and ->resume_early() callbacks (the old callbacks will be considered as legacy and gradually phased out). The main purpose of doing this is to separate suspend (aka S2RAM and standby) callbacks from hibernation callbacks in such a way that the new callbacks won't take arguments and the semantics of each of them will be clearly specified. This has been requested for multiple times by many people, including Linus himself, and the reason is that within the current scheme if ->resume() is called, for example, it's difficult to say why it's been called (ie. is it a resume from RAM or from hibernation or a suspend/hibernation failure etc.?). The second purpose is to make the suspend/hibernation callbacks more flexible so that device drivers can handle more than they can within the current scheme. For example, some drivers may need to prevent new children of the device from being registered before their ->suspend() callbacks are executed or they may want to carry out some operations requiring the availability of some other devices, not directly bound via the parent-child relationship, in order to prepare for the execution of ->suspend(), etc. Ultimately, we'd like to stop using the freezing of tasks for suspend and therefore the drivers' suspend/hibernation code will have to take care of the handling of the user space during suspend/hibernation. That, in turn, would be difficult within the current scheme, without the new ->prepare() and ->complete() callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-20 23:00:01 +02:00
Introduce new top level suspend and hibernation callbacks Introduce 'struct pm_ops' and 'struct pm_ext_ops' ('ext' meaning 'extended') representing suspend and hibernation operations for bus types, device classes, device types and device drivers. Modify the PM core to use 'struct pm_ops' and 'struct pm_ext_ops' objects, if defined, instead of the ->suspend(), ->resume(), ->suspend_late(), and ->resume_early() callbacks (the old callbacks will be considered as legacy and gradually phased out). The main purpose of doing this is to separate suspend (aka S2RAM and standby) callbacks from hibernation callbacks in such a way that the new callbacks won't take arguments and the semantics of each of them will be clearly specified. This has been requested for multiple times by many people, including Linus himself, and the reason is that within the current scheme if ->resume() is called, for example, it's difficult to say why it's been called (ie. is it a resume from RAM or from hibernation or a suspend/hibernation failure etc.?). The second purpose is to make the suspend/hibernation callbacks more flexible so that device drivers can handle more than they can within the current scheme. For example, some drivers may need to prevent new children of the device from being registered before their ->suspend() callbacks are executed or they may want to carry out some operations requiring the availability of some other devices, not directly bound via the parent-child relationship, in order to prepare for the execution of ->suspend(), etc. Ultimately, we'd like to stop using the freezing of tasks for suspend and therefore the drivers' suspend/hibernation code will have to take care of the handling of the user space during suspend/hibernation. That, in turn, would be difficult within the current scheme, without the new ->prepare() and ->complete() callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-20 23:00:01 +02:00
Introduce new top level suspend and hibernation callbacks Introduce 'struct pm_ops' and 'struct pm_ext_ops' ('ext' meaning 'extended') representing suspend and hibernation operations for bus types, device classes, device types and device drivers. Modify the PM core to use 'struct pm_ops' and 'struct pm_ext_ops' objects, if defined, instead of the ->suspend(), ->resume(), ->suspend_late(), and ->resume_early() callbacks (the old callbacks will be considered as legacy and gradually phased out). The main purpose of doing this is to separate suspend (aka S2RAM and standby) callbacks from hibernation callbacks in such a way that the new callbacks won't take arguments and the semantics of each of them will be clearly specified. This has been requested for multiple times by many people, including Linus himself, and the reason is that within the current scheme if ->resume() is called, for example, it's difficult to say why it's been called (ie. is it a resume from RAM or from hibernation or a suspend/hibernation failure etc.?). The second purpose is to make the suspend/hibernation callbacks more flexible so that device drivers can handle more than they can within the current scheme. For example, some drivers may need to prevent new children of the device from being registered before their ->suspend() callbacks are executed or they may want to carry out some operations requiring the availability of some other devices, not directly bound via the parent-child relationship, in order to prepare for the execution of ->suspend(), etc. Ultimately, we'd like to stop using the freezing of tasks for suspend and therefore the drivers' suspend/hibernation code will have to take care of the handling of the user space during suspend/hibernation. That, in turn, would be difficult within the current scheme, without the new ->prepare() and ->complete() callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-20 23:00:01 +02:00
iommu sg merging: add device_dma_parameters structure IOMMUs merges scatter/gather segments without considering a low level driver's restrictions. The problem is that IOMMUs can't access to the limitations because they are in request_queue. This patchset introduces a new structure, device_dma_parameters, including dma information. A pointer to device_dma_parameters is added to struct device. The bus specific structures (like pci_dev) includes device_dma_parameters. Low level drivers can use dma_set_max_seg_size to tell IOMMUs about the restrictions. We can move more dma stuff in struct device (like dma_mask) to struct device_dma_parameters later (needs some cleanups before that). This includes patches for all the IOMMUs that could merge sg (x86_64, ppc, IA64, alpha, sparc64, and parisc) though only the ppc patch was tested. The patches for other IOMMUs are only compile tested. This patch: Add a new structure, device_dma_parameters, including dma information. A pointer to device_dma_parameters is added to struct device. - there are only max_segment_size and segment_boundary_mask there but we'll move more dma stuff in struct device (like dma_mask) to struct device_dma_parameters later. segment_boundary_mask is not supported yet. - new accessors for the dma parameters are added. So we can easily change where to place struct device_dma_parameters in the future. - dma_get_max_seg_size returns 64K if dma_parms in struct device isn't set up properly. 64K is the default max_segment_size in the block layer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 22:27:55 -08:00
fix hotplug for legacy platform drivers We've had various reports of some legacy "probe the hardware" style platform drivers having nasty problems with hotplug support. The core issue is that those legacy drivers don't fully conform to the driver model. They assume a role that should be the responsibility of infrastructure code: creating device nodes. The "modprobe" step in hotplugging relies on drivers to have split those roles into different modules. The lack of this split causes the problems. When a driver creates nodes for devices that don't exist (sending a hotplug event), then exits (aborting one modprobe) before the "modprobe $MODALIAS" step completes (by failing, since it's in the middle of a modprobe), the result can be an endless loop of modprobe invocations ... badness. This fix uses the newish per-device flag controlling issuance of "add" events. (A previous version of this patch used a per-device "driver can hotplug" flag, which only scrubbed $MODALIAS from the environment rather than suppressing the entire hotplug event.) It also shrinks that flag to one bit, saving a word in "struct device". So the net of this patch is removing some nasty failures with legacy drivers, while retaining hotplug capability for the majority of platform drivers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <gregkh@suse.de> Cc: Andres Salomon <dilinger@debian.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 00:29:39 -07:00
iommu sg merging: add device_dma_parameters structure IOMMUs merges scatter/gather segments without considering a low level driver's restrictions. The problem is that IOMMUs can't access to the limitations because they are in request_queue. This patchset introduces a new structure, device_dma_parameters, including dma information. A pointer to device_dma_parameters is added to struct device. The bus specific structures (like pci_dev) includes device_dma_parameters. Low level drivers can use dma_set_max_seg_size to tell IOMMUs about the restrictions. We can move more dma stuff in struct device (like dma_mask) to struct device_dma_parameters later (needs some cleanups before that). This includes patches for all the IOMMUs that could merge sg (x86_64, ppc, IA64, alpha, sparc64, and parisc) though only the ppc patch was tested. The patches for other IOMMUs are only compile tested. This patch: Add a new structure, device_dma_parameters, including dma information. A pointer to device_dma_parameters is added to struct device. - there are only max_segment_size and segment_boundary_mask there but we'll move more dma stuff in struct device (like dma_mask) to struct device_dma_parameters later. segment_boundary_mask is not supported yet. - new accessors for the dma parameters are added. So we can easily change where to place struct device_dma_parameters in the future. - dma_get_max_seg_size returns 64K if dma_parms in struct device isn't set up properly. 64K is the default max_segment_size in the block layer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 22:27:55 -08:00
Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev Devtmpfs lets the kernel create a tmpfs instance called devtmpfs very early at kernel initialization, before any driver-core device is registered. Every device with a major/minor will provide a device node in devtmpfs. Devtmpfs can be changed and altered by userspace at any time, and in any way needed - just like today's udev-mounted tmpfs. Unmodified udev versions will run just fine on top of it, and will recognize an already existing kernel-created device node and use it. The default node permissions are root:root 0600. Proper permissions and user/group ownership, meaningful symlinks, all other policy still needs to be applied by userspace. If a node is created by devtmps, devtmpfs will remove the device node when the device goes away. If the device node was created by userspace, or the devtmpfs created node was replaced by userspace, it will no longer be removed by devtmpfs. If it is requested to auto-mount it, it makes init=/bin/sh work without any further userspace support. /dev will be fully populated and dynamic, and always reflect the current device state of the kernel. With the commonly used dynamic device numbers, it solves the problem where static devices nodes may point to the wrong devices. It is intended to make the initial bootup logic simpler and more robust, by de-coupling the creation of the inital environment, to reliably run userspace processes, from a complex userspace bootstrap logic to provide a working /dev. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jan Blunck <jblunck@suse.de> Tested-By: Harald Hoyer <harald@redhat.com> Tested-By: Scott James Remnant <scott@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 15:23:42 +02:00
Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev Devtmpfs lets the kernel create a tmpfs instance called devtmpfs very early at kernel initialization, before any driver-core device is registered. Every device with a major/minor will provide a device node in devtmpfs. Devtmpfs can be changed and altered by userspace at any time, and in any way needed - just like today's udev-mounted tmpfs. Unmodified udev versions will run just fine on top of it, and will recognize an already existing kernel-created device node and use it. The default node permissions are root:root 0600. Proper permissions and user/group ownership, meaningful symlinks, all other policy still needs to be applied by userspace. If a node is created by devtmps, devtmpfs will remove the device node when the device goes away. If the device node was created by userspace, or the devtmpfs created node was replaced by userspace, it will no longer be removed by devtmpfs. If it is requested to auto-mount it, it makes init=/bin/sh work without any further userspace support. /dev will be fully populated and dynamic, and always reflect the current device state of the kernel. With the commonly used dynamic device numbers, it solves the problem where static devices nodes may point to the wrong devices. It is intended to make the initial bootup logic simpler and more robust, by de-coupling the creation of the inital environment, to reliably run userspace processes, from a complex userspace bootstrap logic to provide a working /dev. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jan Blunck <jblunck@suse.de> Tested-By: Harald Hoyer <harald@redhat.com> Tested-By: Scott James Remnant <scott@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 15:23:42 +02:00
driver core: basic infrastructure for per-module dynamic debug messages Base infrastructure to enable per-module debug messages. I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes control of debugging statements on a per-module basis in one /proc file, currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG, is not set, debugging statements can still be enabled as before, often by defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set. The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls can be dynamically enabled/disabled on a per-module basis. Future plans include extending this functionality to subsystems, that define their own debug levels and flags. Usage: Dynamic debugging is controlled by the debugfs file, <debugfs>/dynamic_printk/modules. This file contains a list of the modules that can be enabled. The format of the file is as follows: <module_name> <enabled=0/1> . . . <module_name> : Name of the module in which the debug call resides <enabled=0/1> : whether the messages are enabled or not For example: snd_hda_intel enabled=0 fixup enabled=1 driver enabled=0 Enable a module: $echo "set enabled=1 <module_name>" > dynamic_printk/modules Disable a module: $echo "set enabled=0 <module_name>" > dynamic_printk/modules Enable all modules: $echo "set enabled=1 all" > dynamic_printk/modules Disable all modules: $echo "set enabled=0 all" > dynamic_printk/modules Finally, passing "dynamic_printk" at the command line enables debugging for all modules. This mode can be turned off via the above disable command. [gkh: minor cleanups and tweaks to make the build work quietly] Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-12 16:46:19 -04:00
driver core: Convert debug functions declared inline __attribute__((format (printf,x,y) to statement expression macros When DEBUG is not defined, pr_debug and dev_dbg and some other local debugging functions are specified as: "inline __attribute__((format (printf, x, y)))" This is done to validate printk arguments when not debugging. Converting these functions to macros or statement expressions "do { if (0) printk(fmt, ##arg); } while (0)" or "({ if (0) printk(fmt, ##arg); 0; }) makes at least gcc 4.2.2 produce smaller objects. This has the additional benefit of allowing the optimizer to avoid calling functions like print_mac that might have been arguments to the printk. defconfig x86 current: $ size vmlinux text data bss dec hex filename 4716770 474560 618496 5809826 58a6a2 vmlinux all converted: (More patches follow) $ size vmlinux text data bss dec hex filename 4716642 474560 618496 5809698 58a622 vmlinux Even kernel/sched.o, which doesn't even use these functions, becomes smaller. It appears that merely having an indirect include of <linux/device.h> can cause bigger objects. $ size sched.inline.o sched.if0.o text data bss dec hex filename 31385 2854 328 34567 8707 sched.inline.o 31366 2854 328 34548 86f4 sched.if0.o The current preprocessed only kernel/sched.i file contains: # 612 "include/linux/device.h" static inline __attribute__((always_inline)) int __attribute__ ((format (printf, 2, 3))) dev_dbg(struct device *dev, const char *fmt, ...) { return 0; } # 628 "include/linux/device.h" static inline __attribute__((always_inline)) int __attribute__ ((format (printf, 2, 3))) dev_vdbg(struct device *dev, const char *fmt, ...) { return 0; } Removing these unused inlines from sched.i shrinks sched.o Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-26 19:08:42 -08:00
driver core: Convert debug functions declared inline __attribute__((format (printf,x,y) to statement expression macros When DEBUG is not defined, pr_debug and dev_dbg and some other local debugging functions are specified as: "inline __attribute__((format (printf, x, y)))" This is done to validate printk arguments when not debugging. Converting these functions to macros or statement expressions "do { if (0) printk(fmt, ##arg); } while (0)" or "({ if (0) printk(fmt, ##arg); 0; }) makes at least gcc 4.2.2 produce smaller objects. This has the additional benefit of allowing the optimizer to avoid calling functions like print_mac that might have been arguments to the printk. defconfig x86 current: $ size vmlinux text data bss dec hex filename 4716770 474560 618496 5809826 58a6a2 vmlinux all converted: (More patches follow) $ size vmlinux text data bss dec hex filename 4716642 474560 618496 5809698 58a622 vmlinux Even kernel/sched.o, which doesn't even use these functions, becomes smaller. It appears that merely having an indirect include of <linux/device.h> can cause bigger objects. $ size sched.inline.o sched.if0.o text data bss dec hex filename 31385 2854 328 34567 8707 sched.inline.o 31366 2854 328 34548 86f4 sched.if0.o The current preprocessed only kernel/sched.i file contains: # 612 "include/linux/device.h" static inline __attribute__((always_inline)) int __attribute__ ((format (printf, 2, 3))) dev_dbg(struct device *dev, const char *fmt, ...) { return 0; } # 628 "include/linux/device.h" static inline __attribute__((always_inline)) int __attribute__ ((format (printf, 2, 3))) dev_vdbg(struct device *dev, const char *fmt, ...) { return 0; } Removing these unused inlines from sched.i shrinks sched.o Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-26 19:08:42 -08:00