linux

mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-20 19:23:40 +00:00

331 lines

10 KiB

Raw Normal View History

arm64: boot: Support Flat Image Tree Add a script which produces a Flat Image Tree (FIT), a single file containing the built kernel and associated devicetree files. Compression defaults to gzip which gives a good balance of size and performance. The files compress from about 86MB to 24MB using this approach. The FIT can be used by bootloaders which support it, such as U-Boot and Linuxboot. It permits automatic selection of the correct devicetree, matching the compatible string of the running board with the closest compatible string in the FIT. There is no need for filenames or other workarounds. Add a 'make image.fit' build target for arm64, as well. The FIT can be examined using 'dumpimage -l'. This uses the 'dtbs-list' file but processes only .dtb files, ignoring the overlay .dtbo files. This features requires pylibfdt (use 'pip install libfdt'). It also requires compression utilities for the algorithm being used. Supported compression options are the same as the Image.xxx files. Use FIT_COMPRESSION to select an algorithm other than gzip. While FIT supports a ramdisk / initrd, no attempt is made to support this here, since it must be built separately from the Linux build. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240329032836.141899-3-sjg@chromium.org Signed-off-by: Will Deacon <will@kernel.org> 2024-03-29 16:28:36 +13:00























scripts/make_fit: Support decomposing DTBs The kernel tree builds some "composite" DTBs, where the final DTB is the result of applying one or more DTB overlays on top of a base DTB with fdtoverlay. The FIT image specification already supports configurations having one base DTB and overlays applied on top. It is then up to the bootloader to apply said overlays and either use or pass on the final result. This allows the FIT image builder to reuse the same FDT images for multiple configurations, if such cases exist. The decomposition function depends on the kernel build system, reading back the .cmd files for the to-be-packaged DTB files to check for the fdtoverlay command being called. This will not work outside the kernel tree. The function is off by default to keep compatibility with possible existing users. To facilitate the decomposition and keep the code clean, the model and compatitble string extraction have been moved out of the output_dtb function. The FDT image description is replaced with the base file name of the included image. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 2024-06-13 17:34:32 +08:00




arm64: boot: Support Flat Image Tree Add a script which produces a Flat Image Tree (FIT), a single file containing the built kernel and associated devicetree files. Compression defaults to gzip which gives a good balance of size and performance. The files compress from about 86MB to 24MB using this approach. The FIT can be used by bootloaders which support it, such as U-Boot and Linuxboot. It permits automatic selection of the correct devicetree, matching the compatible string of the running board with the closest compatible string in the FIT. There is no need for filenames or other workarounds. Add a 'make image.fit' build target for arm64, as well. The FIT can be examined using 'dumpimage -l'. This uses the 'dtbs-list' file but processes only .dtb files, ignoring the overlay .dtbo files. This features requires pylibfdt (use 'pip install libfdt'). It also requires compression utilities for the algorithm being used. Supported compression options are the same as the Image.xxx files. Use FIT_COMPRESSION to select an algorithm other than gzip. While FIT supports a ramdisk / initrd, no attempt is made to support this here, since it must be built separately from the Linux build. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240329032836.141899-3-sjg@chromium.org Signed-off-by: Will Deacon <will@kernel.org> 2024-03-29 16:28:36 +13:00









































scripts/make_fit: Support decomposing DTBs The kernel tree builds some "composite" DTBs, where the final DTB is the result of applying one or more DTB overlays on top of a base DTB with fdtoverlay. The FIT image specification already supports configurations having one base DTB and overlays applied on top. It is then up to the bootloader to apply said overlays and either use or pass on the final result. This allows the FIT image builder to reuse the same FDT images for multiple configurations, if such cases exist. The decomposition function depends on the kernel build system, reading back the .cmd files for the to-be-packaged DTB files to check for the fdtoverlay command being called. This will not work outside the kernel tree. The function is off by default to keep compatibility with possible existing users. To facilitate the decomposition and keep the code clean, the model and compatitble string extraction have been moved out of the output_dtb function. The FDT image description is replaced with the base file name of the included image. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 2024-06-13 17:34:32 +08:00

arm64: boot: Support Flat Image Tree Add a script which produces a Flat Image Tree (FIT), a single file containing the built kernel and associated devicetree files. Compression defaults to gzip which gives a good balance of size and performance. The files compress from about 86MB to 24MB using this approach. The FIT can be used by bootloaders which support it, such as U-Boot and Linuxboot. It permits automatic selection of the correct devicetree, matching the compatible string of the running board with the closest compatible string in the FIT. There is no need for filenames or other workarounds. Add a 'make image.fit' build target for arm64, as well. The FIT can be examined using 'dumpimage -l'. This uses the 'dtbs-list' file but processes only .dtb files, ignoring the overlay .dtbo files. This features requires pylibfdt (use 'pip install libfdt'). It also requires compression utilities for the algorithm being used. Supported compression options are the same as the Image.xxx files. Use FIT_COMPRESSION to select an algorithm other than gzip. While FIT supports a ramdisk / initrd, no attempt is made to support this here, since it must be built separately from the Linux build. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240329032836.141899-3-sjg@chromium.org Signed-off-by: Will Deacon <will@kernel.org> 2024-03-29 16:28:36 +13:00











































































scripts/make_fit: Support decomposing DTBs The kernel tree builds some "composite" DTBs, where the final DTB is the result of applying one or more DTB overlays on top of a base DTB with fdtoverlay. The FIT image specification already supports configurations having one base DTB and overlays applied on top. It is then up to the bootloader to apply said overlays and either use or pass on the final result. This allows the FIT image builder to reuse the same FDT images for multiple configurations, if such cases exist. The decomposition function depends on the kernel build system, reading back the .cmd files for the to-be-packaged DTB files to check for the fdtoverlay command being called. This will not work outside the kernel tree. The function is off by default to keep compatibility with possible existing users. To facilitate the decomposition and keep the code clean, the model and compatitble string extraction have been moved out of the output_dtb function. The FDT image description is replaced with the base file name of the included image. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 2024-06-13 17:34:32 +08:00
arm64: boot: Support Flat Image Tree Add a script which produces a Flat Image Tree (FIT), a single file containing the built kernel and associated devicetree files. Compression defaults to gzip which gives a good balance of size and performance. The files compress from about 86MB to 24MB using this approach. The FIT can be used by bootloaders which support it, such as U-Boot and Linuxboot. It permits automatic selection of the correct devicetree, matching the compatible string of the running board with the closest compatible string in the FIT. There is no need for filenames or other workarounds. Add a 'make image.fit' build target for arm64, as well. The FIT can be examined using 'dumpimage -l'. This uses the 'dtbs-list' file but processes only .dtb files, ignoring the overlay .dtbo files. This features requires pylibfdt (use 'pip install libfdt'). It also requires compression utilities for the algorithm being used. Supported compression options are the same as the Image.xxx files. Use FIT_COMPRESSION to select an algorithm other than gzip. While FIT supports a ramdisk / initrd, no attempt is made to support this here, since it must be built separately from the Linux build. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240329032836.141899-3-sjg@chromium.org Signed-off-by: Will Deacon <will@kernel.org> 2024-03-29 16:28:36 +13:00



scripts/make_fit: Support decomposing DTBs The kernel tree builds some "composite" DTBs, where the final DTB is the result of applying one or more DTB overlays on top of a base DTB with fdtoverlay. The FIT image specification already supports configurations having one base DTB and overlays applied on top. It is then up to the bootloader to apply said overlays and either use or pass on the final result. This allows the FIT image builder to reuse the same FDT images for multiple configurations, if such cases exist. The decomposition function depends on the kernel build system, reading back the .cmd files for the to-be-packaged DTB files to check for the fdtoverlay command being called. This will not work outside the kernel tree. The function is off by default to keep compatibility with possible existing users. To facilitate the decomposition and keep the code clean, the model and compatitble string extraction have been moved out of the output_dtb function. The FDT image description is replaced with the base file name of the included image. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 2024-06-13 17:34:32 +08:00
arm64: boot: Support Flat Image Tree Add a script which produces a Flat Image Tree (FIT), a single file containing the built kernel and associated devicetree files. Compression defaults to gzip which gives a good balance of size and performance. The files compress from about 86MB to 24MB using this approach. The FIT can be used by bootloaders which support it, such as U-Boot and Linuxboot. It permits automatic selection of the correct devicetree, matching the compatible string of the running board with the closest compatible string in the FIT. There is no need for filenames or other workarounds. Add a 'make image.fit' build target for arm64, as well. The FIT can be examined using 'dumpimage -l'. This uses the 'dtbs-list' file but processes only .dtb files, ignoring the overlay .dtbo files. This features requires pylibfdt (use 'pip install libfdt'). It also requires compression utilities for the algorithm being used. Supported compression options are the same as the Image.xxx files. Use FIT_COMPRESSION to select an algorithm other than gzip. While FIT supports a ramdisk / initrd, no attempt is made to support this here, since it must be built separately from the Linux build. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240329032836.141899-3-sjg@chromium.org Signed-off-by: Will Deacon <will@kernel.org> 2024-03-29 16:28:36 +13:00











































scripts/make_fit: Drop fdt image entry compatible string According to the FIT image source file format document found in U-boot [1] and the split-out FIT image specification [2], under "'/images' node" -> "Conditionally mandatory property", the "compatible" property is described as "compatible method for loading image", i.e., not the compatible string embedded in the FDT or used for matching. Drop the compatible string from the fdt image entry node. While at it also fix up a typo in the document section of output_dtb. [1] U-boot source "doc/usage/fit/source_file_format.rst", or on the website: https://docs.u-boot.org/en/latest/usage/fit/source_file_format.html [2] https://github.com/open-source-firmware/flat-image-tree/blob/main/source/chapter2-source-file-format.rst Fixes: 7a23b027ec17 ("arm64: boot: Support Flat Image Tree") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 2024-05-28 16:52:18 +08:00
arm64: boot: Support Flat Image Tree Add a script which produces a Flat Image Tree (FIT), a single file containing the built kernel and associated devicetree files. Compression defaults to gzip which gives a good balance of size and performance. The files compress from about 86MB to 24MB using this approach. The FIT can be used by bootloaders which support it, such as U-Boot and Linuxboot. It permits automatic selection of the correct devicetree, matching the compatible string of the running board with the closest compatible string in the FIT. There is no need for filenames or other workarounds. Add a 'make image.fit' build target for arm64, as well. The FIT can be examined using 'dumpimage -l'. This uses the 'dtbs-list' file but processes only .dtb files, ignoring the overlay .dtbo files. This features requires pylibfdt (use 'pip install libfdt'). It also requires compression utilities for the algorithm being used. Supported compression options are the same as the Image.xxx files. Use FIT_COMPRESSION to select an algorithm other than gzip. While FIT supports a ramdisk / initrd, no attempt is made to support this here, since it must be built separately from the Linux build. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240329032836.141899-3-sjg@chromium.org Signed-off-by: Will Deacon <will@kernel.org> 2024-03-29 16:28:36 +13:00



scripts/make_fit: Support decomposing DTBs The kernel tree builds some "composite" DTBs, where the final DTB is the result of applying one or more DTB overlays on top of a base DTB with fdtoverlay. The FIT image specification already supports configurations having one base DTB and overlays applied on top. It is then up to the bootloader to apply said overlays and either use or pass on the final result. This allows the FIT image builder to reuse the same FDT images for multiple configurations, if such cases exist. The decomposition function depends on the kernel build system, reading back the .cmd files for the to-be-packaged DTB files to check for the fdtoverlay command being called. This will not work outside the kernel tree. The function is off by default to keep compatibility with possible existing users. To facilitate the decomposition and keep the code clean, the model and compatitble string extraction have been moved out of the output_dtb function. The FDT image description is replaced with the base file name of the included image. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 2024-06-13 17:34:32 +08:00
arm64: boot: Support Flat Image Tree Add a script which produces a Flat Image Tree (FIT), a single file containing the built kernel and associated devicetree files. Compression defaults to gzip which gives a good balance of size and performance. The files compress from about 86MB to 24MB using this approach. The FIT can be used by bootloaders which support it, such as U-Boot and Linuxboot. It permits automatic selection of the correct devicetree, matching the compatible string of the running board with the closest compatible string in the FIT. There is no need for filenames or other workarounds. Add a 'make image.fit' build target for arm64, as well. The FIT can be examined using 'dumpimage -l'. This uses the 'dtbs-list' file but processes only .dtb files, ignoring the overlay .dtbo files. This features requires pylibfdt (use 'pip install libfdt'). It also requires compression utilities for the algorithm being used. Supported compression options are the same as the Image.xxx files. Use FIT_COMPRESSION to select an algorithm other than gzip. While FIT supports a ramdisk / initrd, no attempt is made to support this here, since it must be built separately from the Linux build. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240329032836.141899-3-sjg@chromium.org Signed-off-by: Will Deacon <will@kernel.org> 2024-03-29 16:28:36 +13:00








scripts/make_fit: Support decomposing DTBs The kernel tree builds some "composite" DTBs, where the final DTB is the result of applying one or more DTB overlays on top of a base DTB with fdtoverlay. The FIT image specification already supports configurations having one base DTB and overlays applied on top. It is then up to the bootloader to apply said overlays and either use or pass on the final result. This allows the FIT image builder to reuse the same FDT images for multiple configurations, if such cases exist. The decomposition function depends on the kernel build system, reading back the .cmd files for the to-be-packaged DTB files to check for the fdtoverlay command being called. This will not work outside the kernel tree. The function is off by default to keep compatibility with possible existing users. To facilitate the decomposition and keep the code clean, the model and compatitble string extraction have been moved out of the output_dtb function. The FDT image description is replaced with the base file name of the included image. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 2024-06-13 17:34:32 +08:00




































arm64: boot: Support Flat Image Tree Add a script which produces a Flat Image Tree (FIT), a single file containing the built kernel and associated devicetree files. Compression defaults to gzip which gives a good balance of size and performance. The files compress from about 86MB to 24MB using this approach. The FIT can be used by bootloaders which support it, such as U-Boot and Linuxboot. It permits automatic selection of the correct devicetree, matching the compatible string of the running board with the closest compatible string in the FIT. There is no need for filenames or other workarounds. Add a 'make image.fit' build target for arm64, as well. The FIT can be examined using 'dumpimage -l'. This uses the 'dtbs-list' file but processes only .dtb files, ignoring the overlay .dtbo files. This features requires pylibfdt (use 'pip install libfdt'). It also requires compression utilities for the algorithm being used. Supported compression options are the same as the Image.xxx files. Use FIT_COMPRESSION to select an algorithm other than gzip. While FIT supports a ramdisk / initrd, no attempt is made to support this here, since it must be built separately from the Linux build. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240329032836.141899-3-sjg@chromium.org Signed-off-by: Will Deacon <will@kernel.org> 2024-03-29 16:28:36 +13:00
















scripts/make_fit: Support decomposing DTBs The kernel tree builds some "composite" DTBs, where the final DTB is the result of applying one or more DTB overlays on top of a base DTB with fdtoverlay. The FIT image specification already supports configurations having one base DTB and overlays applied on top. It is then up to the bootloader to apply said overlays and either use or pass on the final result. This allows the FIT image builder to reuse the same FDT images for multiple configurations, if such cases exist. The decomposition function depends on the kernel build system, reading back the .cmd files for the to-be-packaged DTB files to check for the fdtoverlay command being called. This will not work outside the kernel tree. The function is off by default to keep compatibility with possible existing users. To facilitate the decomposition and keep the code clean, the model and compatitble string extraction have been moved out of the output_dtb function. The FDT image description is replaced with the base file name of the included image. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 2024-06-13 17:34:32 +08:00
arm64: boot: Support Flat Image Tree Add a script which produces a Flat Image Tree (FIT), a single file containing the built kernel and associated devicetree files. Compression defaults to gzip which gives a good balance of size and performance. The files compress from about 86MB to 24MB using this approach. The FIT can be used by bootloaders which support it, such as U-Boot and Linuxboot. It permits automatic selection of the correct devicetree, matching the compatible string of the running board with the closest compatible string in the FIT. There is no need for filenames or other workarounds. Add a 'make image.fit' build target for arm64, as well. The FIT can be examined using 'dumpimage -l'. This uses the 'dtbs-list' file but processes only .dtb files, ignoring the overlay .dtbo files. This features requires pylibfdt (use 'pip install libfdt'). It also requires compression utilities for the algorithm being used. Supported compression options are the same as the Image.xxx files. Use FIT_COMPRESSION to select an algorithm other than gzip. While FIT supports a ramdisk / initrd, no attempt is made to support this here, since it must be built separately from the Linux build. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240329032836.141899-3-sjg@chromium.org Signed-off-by: Will Deacon <will@kernel.org> 2024-03-29 16:28:36 +13:00







scripts/make_fit: Support decomposing DTBs The kernel tree builds some "composite" DTBs, where the final DTB is the result of applying one or more DTB overlays on top of a base DTB with fdtoverlay. The FIT image specification already supports configurations having one base DTB and overlays applied on top. It is then up to the bootloader to apply said overlays and either use or pass on the final result. This allows the FIT image builder to reuse the same FDT images for multiple configurations, if such cases exist. The decomposition function depends on the kernel build system, reading back the .cmd files for the to-be-packaged DTB files to check for the fdtoverlay command being called. This will not work outside the kernel tree. The function is off by default to keep compatibility with possible existing users. To facilitate the decomposition and keep the code clean, the model and compatitble string extraction have been moved out of the output_dtb function. The FDT image description is replaced with the base file name of the included image. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 2024-06-13 17:34:32 +08:00















arm64: boot: Support Flat Image Tree Add a script which produces a Flat Image Tree (FIT), a single file containing the built kernel and associated devicetree files. Compression defaults to gzip which gives a good balance of size and performance. The files compress from about 86MB to 24MB using this approach. The FIT can be used by bootloaders which support it, such as U-Boot and Linuxboot. It permits automatic selection of the correct devicetree, matching the compatible string of the running board with the closest compatible string in the FIT. There is no need for filenames or other workarounds. Add a 'make image.fit' build target for arm64, as well. The FIT can be examined using 'dumpimage -l'. This uses the 'dtbs-list' file but processes only .dtb files, ignoring the overlay .dtbo files. This features requires pylibfdt (use 'pip install libfdt'). It also requires compression utilities for the algorithm being used. Supported compression options are the same as the Image.xxx files. Use FIT_COMPRESSION to select an algorithm other than gzip. While FIT supports a ramdisk / initrd, no attempt is made to support this here, since it must be built separately from the Linux build. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240329032836.141899-3-sjg@chromium.org Signed-off-by: Will Deacon <will@kernel.org> 2024-03-29 16:28:36 +13:00

331 lines 10 KiB Raw Normal View History

331 lines

10 KiB

Raw Normal View History