linux/fs/netfs/direct_write.c

389 lines
11 KiB

netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict sequence Fix netfslib such that when it's making an unbuffered or DIO write, to make sure that it sends each subrequest strictly sequentially, waiting till the previous one is 'committed' before sending the next so that we don't have pieces landing out of order and potentially leaving a hole if an error occurs (ENOSPC for example). This is done by copying in just those bits of issuing, collecting and retrying subrequests that are necessary to do one subrequest at a time. Retrying, in particular, is simpler because if the current subrequest needs retrying, the source iterator can just be copied again and the subrequest prepped and issued again without needing to be concerned about whether it needs merging with the previous or next in the sequence. Note that the issuing loop waits for a subrequest to complete right after issuing it, but this wait could be moved elsewhere allowing preparatory steps to be performed whilst the subrequest is in progress. In particular, once content encryption is available in netfslib, that could be done whilst waiting, as could cleanup of buffers that have been completed. Fixes: 153a9961b551 ("netfs: Implement unbuffered/DIO write support") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/58526.1772112753@warthog.procyon.org.uk Tested-by: Steve French <sfrench@samba.org> Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2026-02-26 13:32:33 +00:00
netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict sequence Fix netfslib such that when it's making an unbuffered or DIO write, to make sure that it sends each subrequest strictly sequentially, waiting till the previous one is 'committed' before sending the next so that we don't have pieces landing out of order and potentially leaving a hole if an error occurs (ENOSPC for example). This is done by copying in just those bits of issuing, collecting and retrying subrequests that are necessary to do one subrequest at a time. Retrying, in particular, is simpler because if the current subrequest needs retrying, the source iterator can just be copied again and the subrequest prepped and issued again without needing to be concerned about whether it needs merging with the previous or next in the sequence. Note that the issuing loop waits for a subrequest to complete right after issuing it, but this wait could be moved elsewhere allowing preparatory steps to be performed whilst the subrequest is in progress. In particular, once content encryption is available in netfslib, that could be done whilst waiting, as could cleanup of buffers that have been completed. Fixes: 153a9961b551 ("netfs: Implement unbuffered/DIO write support") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/58526.1772112753@warthog.procyon.org.uk Tested-by: Steve French <sfrench@samba.org> Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2026-02-26 13:32:33 +00:00
netfs: Fix kernel async DIO Netfslib needs to be able to handle kernel-initiated asynchronous DIO that is supplied with a bio_vec[] array. Currently, because of the async flag, this gets passed to netfs_extract_user_iter() which throws a warning and fails because it only handles IOVEC and UBUF iterators. This can be triggered through a combination of cifs and a loopback blockdev with something like: mount //my/cifs/share /foo dd if=/dev/zero of=/foo/m0 bs=4K count=1K losetup --sector-size 4096 --direct-io=on /dev/loop2046 /foo/m0 echo hello >/dev/loop2046 This causes the following to appear in syslog: WARNING: CPU: 2 PID: 109 at fs/netfs/iterator.c:50 netfs_extract_user_iter+0x170/0x250 [netfs] and the write to fail. Fix this by removing the check in netfs_unbuffered_write_iter_locked() that causes async kernel DIO writes to be handled as userspace writes. Note that this change relies on the kernel caller maintaining the existence of the bio_vec array (or kvec[] or folio_queue) until the op is complete. Fixes: 153a9961b551 ("netfs: Implement unbuffered/DIO write support") Reported-by: Nicolas Baranger <nicolas.baranger@3xo.fr> Closes: https://lore.kernel.org/r/fedd8a40d54b2969097ffa4507979858@3xo.fr/ Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/608725.1736275167@warthog.procyon.org.uk Tested-by: Nicolas Baranger <nicolas.baranger@3xo.fr> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> cc: Steve French <smfrench@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-07 18:39:27 +00:00
netfs: fix reference leak Commit 20d72b00ca81 ("netfs: Fix the request's work item to not require a ref") modified netfs_alloc_request() to initialize the reference counter to 2 instead of 1. The rationale was that the requet's "work" would release the second reference after completion (via netfs_{read,write}_collection_worker()). That works most of the time if all goes well. However, it leaks this additional reference if the request is released before the I/O operation has been submitted: the error code path only decrements the reference counter once and the work item will never be queued because there will never be a completion. This has caused outages of our whole server cluster today because tasks were blocked in netfs_wait_for_outstanding_io(), leading to deadlocks in Ceph (another bug that I will address soon in another patch). This was caused by a netfs_pgpriv2_begin_copy_to_cache() call which failed in fscache_begin_write_operation(). The leaked netfs_io_request was never completed, leaving `netfs_inode.io_count` with a positive value forever. All of this is super-fragile code. Finding out which code paths will lead to an eventual completion and which do not is hard to see: - Some functions like netfs_create_write_req() allocate a request, but will never submit any I/O. - netfs_unbuffered_read_iter_locked() calls netfs_unbuffered_read() and then netfs_put_request(); however, netfs_unbuffered_read() can also fail early before submitting the I/O request, therefore another netfs_put_request() call must be added there. A rule of thumb is that functions that return a `netfs_io_request` do not submit I/O, and all of their callers must be checked. For my taste, the whole netfs code needs an overhaul to make reference counting easier to understand and less fragile & obscure. But to fix this bug here and now and produce a patch that is adequate for a stable backport, I tried a minimal approach that quickly frees the request object upon early failure. I decided against adding a second netfs_put_request() each time because that would cause code duplication which obscures the code further. Instead, I added the function netfs_put_failed_request() which frees such a failed request synchronously under the assumption that the reference count is exactly 2 (as initially set by netfs_alloc_request() and never touched), verified by a WARN_ON_ONCE(). It then deinitializes the request object (without going through the "cleanup_work" indirection) and frees the allocation (with RCU protection to protect against concurrent access by netfs_requests_seq_start()). All code paths that fail early have been changed to call netfs_put_failed_request() instead of netfs_put_request(). Additionally, I have added a netfs_put_request() call to netfs_unbuffered_read() as explained above because the netfs_put_failed_request() approach does not work there. Fixes: 20d72b00ca81 ("netfs: Fix the request's work item to not require a ref") Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Paulo Alcantara <pc@manguebit.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org cc: stable@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-09-25 14:08:20 +01:00
netfs: Fix kernel async DIO Netfslib needs to be able to handle kernel-initiated asynchronous DIO that is supplied with a bio_vec[] array. Currently, because of the async flag, this gets passed to netfs_extract_user_iter() which throws a warning and fails because it only handles IOVEC and UBUF iterators. This can be triggered through a combination of cifs and a loopback blockdev with something like: mount //my/cifs/share /foo dd if=/dev/zero of=/foo/m0 bs=4K count=1K losetup --sector-size 4096 --direct-io=on /dev/loop2046 /foo/m0 echo hello >/dev/loop2046 This causes the following to appear in syslog: WARNING: CPU: 2 PID: 109 at fs/netfs/iterator.c:50 netfs_extract_user_iter+0x170/0x250 [netfs] and the write to fail. Fix this by removing the check in netfs_unbuffered_write_iter_locked() that causes async kernel DIO writes to be handled as userspace writes. Note that this change relies on the kernel caller maintaining the existence of the bio_vec array (or kvec[] or folio_queue) until the op is complete. Fixes: 153a9961b551 ("netfs: Implement unbuffered/DIO write support") Reported-by: Nicolas Baranger <nicolas.baranger@3xo.fr> Closes: https://lore.kernel.org/r/fedd8a40d54b2969097ffa4507979858@3xo.fr/ Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/608725.1736275167@warthog.procyon.org.uk Tested-by: Nicolas Baranger <nicolas.baranger@3xo.fr> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> cc: Steve French <smfrench@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-07 18:39:27 +00:00
netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict sequence Fix netfslib such that when it's making an unbuffered or DIO write, to make sure that it sends each subrequest strictly sequentially, waiting till the previous one is 'committed' before sending the next so that we don't have pieces landing out of order and potentially leaving a hole if an error occurs (ENOSPC for example). This is done by copying in just those bits of issuing, collecting and retrying subrequests that are necessary to do one subrequest at a time. Retrying, in particular, is simpler because if the current subrequest needs retrying, the source iterator can just be copied again and the subrequest prepped and issued again without needing to be concerned about whether it needs merging with the previous or next in the sequence. Note that the issuing loop waits for a subrequest to complete right after issuing it, but this wait could be moved elsewhere allowing preparatory steps to be performed whilst the subrequest is in progress. In particular, once content encryption is available in netfslib, that could be done whilst waiting, as could cleanup of buffers that have been completed. Fixes: 153a9961b551 ("netfs: Implement unbuffered/DIO write support") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/58526.1772112753@warthog.procyon.org.uk Tested-by: Steve French <sfrench@samba.org> Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2026-02-26 13:32:33 +00:00
netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict sequence Fix netfslib such that when it's making an unbuffered or DIO write, to make sure that it sends each subrequest strictly sequentially, waiting till the previous one is 'committed' before sending the next so that we don't have pieces landing out of order and potentially leaving a hole if an error occurs (ENOSPC for example). This is done by copying in just those bits of issuing, collecting and retrying subrequests that are necessary to do one subrequest at a time. Retrying, in particular, is simpler because if the current subrequest needs retrying, the source iterator can just be copied again and the subrequest prepped and issued again without needing to be concerned about whether it needs merging with the previous or next in the sequence. Note that the issuing loop waits for a subrequest to complete right after issuing it, but this wait could be moved elsewhere allowing preparatory steps to be performed whilst the subrequest is in progress. In particular, once content encryption is available in netfslib, that could be done whilst waiting, as could cleanup of buffers that have been completed. Fixes: 153a9961b551 ("netfs: Implement unbuffered/DIO write support") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/58526.1772112753@warthog.procyon.org.uk Tested-by: Steve French <sfrench@samba.org> Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2026-02-26 13:32:33 +00:00
netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict sequence Fix netfslib such that when it's making an unbuffered or DIO write, to make sure that it sends each subrequest strictly sequentially, waiting till the previous one is 'committed' before sending the next so that we don't have pieces landing out of order and potentially leaving a hole if an error occurs (ENOSPC for example). This is done by copying in just those bits of issuing, collecting and retrying subrequests that are necessary to do one subrequest at a time. Retrying, in particular, is simpler because if the current subrequest needs retrying, the source iterator can just be copied again and the subrequest prepped and issued again without needing to be concerned about whether it needs merging with the previous or next in the sequence. Note that the issuing loop waits for a subrequest to complete right after issuing it, but this wait could be moved elsewhere allowing preparatory steps to be performed whilst the subrequest is in progress. In particular, once content encryption is available in netfslib, that could be done whilst waiting, as could cleanup of buffers that have been completed. Fixes: 153a9961b551 ("netfs: Implement unbuffered/DIO write support") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/58526.1772112753@warthog.procyon.org.uk Tested-by: Steve French <sfrench@samba.org> Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2026-02-26 13:32:33 +00:00
netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict sequence Fix netfslib such that when it's making an unbuffered or DIO write, to make sure that it sends each subrequest strictly sequentially, waiting till the previous one is 'committed' before sending the next so that we don't have pieces landing out of order and potentially leaving a hole if an error occurs (ENOSPC for example). This is done by copying in just those bits of issuing, collecting and retrying subrequests that are necessary to do one subrequest at a time. Retrying, in particular, is simpler because if the current subrequest needs retrying, the source iterator can just be copied again and the subrequest prepped and issued again without needing to be concerned about whether it needs merging with the previous or next in the sequence. Note that the issuing loop waits for a subrequest to complete right after issuing it, but this wait could be moved elsewhere allowing preparatory steps to be performed whilst the subrequest is in progress. In particular, once content encryption is available in netfslib, that could be done whilst waiting, as could cleanup of buffers that have been completed. Fixes: 153a9961b551 ("netfs: Implement unbuffered/DIO write support") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/58526.1772112753@warthog.procyon.org.uk Tested-by: Steve French <sfrench@samba.org> Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2026-02-26 13:32:33 +00:00
netfs: Fix the request's work item to not require a ref When the netfs_io_request struct's work item is queued, it must be supplied with a ref to the work item struct to prevent it being deallocated whilst on the queue or whilst it is being processed. This is tricky to manage as we have to get a ref before we try and queue it and then we may find it's already queued and is thus already holding a ref - in which case we have to try and get rid of the ref again. The problem comes if we're in BH or IRQ context and need to drop the ref: if netfs_put_request() reduces the count to 0, we have to do the cleanup - but the cleanup may need to wait. Fix this by adding a new work item to the request, ->cleanup_work, and dispatching that when the refcount hits zero. That can then synchronously cancel any outstanding work on the main work item before doing the cleanup. Adding a new work item also deals with another problem upstream where it's sometimes changing the work func in the put function and requeuing it - which has occasionally in the past caused the cleanup to happen incorrectly. As a bonus, this allows us to get rid of the 'was_async' parameter from a bunch of functions. This indicated whether the put function might not be permitted to sleep. Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com cc: Paulo Alcantara <pc@manguebit.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Steve French <stfrench@microsoft.com> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-05-19 10:07:03 +01:00
netfs: fix reference leak Commit 20d72b00ca81 ("netfs: Fix the request's work item to not require a ref") modified netfs_alloc_request() to initialize the reference counter to 2 instead of 1. The rationale was that the requet's "work" would release the second reference after completion (via netfs_{read,write}_collection_worker()). That works most of the time if all goes well. However, it leaks this additional reference if the request is released before the I/O operation has been submitted: the error code path only decrements the reference counter once and the work item will never be queued because there will never be a completion. This has caused outages of our whole server cluster today because tasks were blocked in netfs_wait_for_outstanding_io(), leading to deadlocks in Ceph (another bug that I will address soon in another patch). This was caused by a netfs_pgpriv2_begin_copy_to_cache() call which failed in fscache_begin_write_operation(). The leaked netfs_io_request was never completed, leaving `netfs_inode.io_count` with a positive value forever. All of this is super-fragile code. Finding out which code paths will lead to an eventual completion and which do not is hard to see: - Some functions like netfs_create_write_req() allocate a request, but will never submit any I/O. - netfs_unbuffered_read_iter_locked() calls netfs_unbuffered_read() and then netfs_put_request(); however, netfs_unbuffered_read() can also fail early before submitting the I/O request, therefore another netfs_put_request() call must be added there. A rule of thumb is that functions that return a `netfs_io_request` do not submit I/O, and all of their callers must be checked. For my taste, the whole netfs code needs an overhaul to make reference counting easier to understand and less fragile & obscure. But to fix this bug here and now and produce a patch that is adequate for a stable backport, I tried a minimal approach that quickly frees the request object upon early failure. I decided against adding a second netfs_put_request() each time because that would cause code duplication which obscures the code further. Instead, I added the function netfs_put_failed_request() which frees such a failed request synchronously under the assumption that the reference count is exactly 2 (as initially set by netfs_alloc_request() and never touched), verified by a WARN_ON_ONCE(). It then deinitializes the request object (without going through the "cleanup_work" indirection) and frees the allocation (with RCU protection to protect against concurrent access by netfs_requests_seq_start()). All code paths that fail early have been changed to call netfs_put_failed_request() instead of netfs_put_request(). Additionally, I have added a netfs_put_request() call to netfs_unbuffered_read() as explained above because the netfs_put_failed_request() approach does not work there. Fixes: 20d72b00ca81 ("netfs: Fix the request's work item to not require a ref") Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Paulo Alcantara <pc@manguebit.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org cc: stable@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-09-25 14:08:20 +01:00
mm: Provide a means of invalidation without using launder_folio Implement a replacement for launder_folio. The key feature of invalidate_inode_pages2() is that it locks each folio individually, unmaps it to prevent mmap'd accesses interfering and calls the ->launder_folio() address_space op to flush it. This has problems: firstly, each folio is written individually as one or more small writes; secondly, adjacent folios cannot be added so easily into the laundry; thirdly, it's yet another op to implement. Instead, use the invalidate lock to cause anyone wanting to add a folio to the inode to wait, then unmap all the folios if we have mmaps, then, conditionally, use ->writepages() to flush any dirty data back and then discard all pages. The invalidate lock prevents ->read_iter(), ->write_iter() and faulting through mmap all from adding pages for the duration. This is then used from netfslib to handle the flusing in unbuffered and direct writes. Signed-off-by: David Howells <dhowells@redhat.com> cc: Matthew Wilcox <willy@infradead.org> cc: Miklos Szeredi <miklos@szeredi.hu> cc: Trond Myklebust <trond.myklebust@hammerspace.com> cc: Christoph Hellwig <hch@lst.de> cc: Andrew Morton <akpm@linux-foundation.org> cc: Alexander Viro <viro@zeniv.linux.org.uk> cc: Christian Brauner <brauner@kernel.org> cc: Jeff Layton <jlayton@kernel.org> cc: linux-mm@kvack.org cc: linux-fsdevel@vger.kernel.org cc: netfs@lists.linux.dev cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: devel@lists.orangefs.org
2024-03-27 08:51:38 +00:00
mm: Provide a means of invalidation without using launder_folio Implement a replacement for launder_folio. The key feature of invalidate_inode_pages2() is that it locks each folio individually, unmaps it to prevent mmap'd accesses interfering and calls the ->launder_folio() address_space op to flush it. This has problems: firstly, each folio is written individually as one or more small writes; secondly, adjacent folios cannot be added so easily into the laundry; thirdly, it's yet another op to implement. Instead, use the invalidate lock to cause anyone wanting to add a folio to the inode to wait, then unmap all the folios if we have mmaps, then, conditionally, use ->writepages() to flush any dirty data back and then discard all pages. The invalidate lock prevents ->read_iter(), ->write_iter() and faulting through mmap all from adding pages for the duration. This is then used from netfslib to handle the flusing in unbuffered and direct writes. Signed-off-by: David Howells <dhowells@redhat.com> cc: Matthew Wilcox <willy@infradead.org> cc: Miklos Szeredi <miklos@szeredi.hu> cc: Trond Myklebust <trond.myklebust@hammerspace.com> cc: Christoph Hellwig <hch@lst.de> cc: Andrew Morton <akpm@linux-foundation.org> cc: Alexander Viro <viro@zeniv.linux.org.uk> cc: Christian Brauner <brauner@kernel.org> cc: Jeff Layton <jlayton@kernel.org> cc: linux-mm@kvack.org cc: linux-fsdevel@vger.kernel.org cc: netfs@lists.linux.dev cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: devel@lists.orangefs.org
2024-03-27 08:51:38 +00:00
mm: Provide a means of invalidation without using launder_folio Implement a replacement for launder_folio. The key feature of invalidate_inode_pages2() is that it locks each folio individually, unmaps it to prevent mmap'd accesses interfering and calls the ->launder_folio() address_space op to flush it. This has problems: firstly, each folio is written individually as one or more small writes; secondly, adjacent folios cannot be added so easily into the laundry; thirdly, it's yet another op to implement. Instead, use the invalidate lock to cause anyone wanting to add a folio to the inode to wait, then unmap all the folios if we have mmaps, then, conditionally, use ->writepages() to flush any dirty data back and then discard all pages. The invalidate lock prevents ->read_iter(), ->write_iter() and faulting through mmap all from adding pages for the duration. This is then used from netfslib to handle the flusing in unbuffered and direct writes. Signed-off-by: David Howells <dhowells@redhat.com> cc: Matthew Wilcox <willy@infradead.org> cc: Miklos Szeredi <miklos@szeredi.hu> cc: Trond Myklebust <trond.myklebust@hammerspace.com> cc: Christoph Hellwig <hch@lst.de> cc: Andrew Morton <akpm@linux-foundation.org> cc: Alexander Viro <viro@zeniv.linux.org.uk> cc: Christian Brauner <brauner@kernel.org> cc: Jeff Layton <jlayton@kernel.org> cc: linux-mm@kvack.org cc: linux-fsdevel@vger.kernel.org cc: netfs@lists.linux.dev cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: devel@lists.orangefs.org
2024-03-27 08:51:38 +00:00
netfs: Optimise away reads above the point at which there can be no data Track the file position above which the server is not expected to have any data (the "zero point") and preemptively assume that we can satisfy requests by filling them with zeroes locally rather than attempting to download them if they're over that line - even if we've written data back to the server. Assume that any data that was written back above that position is held in the local cache. Note that we have to split requests that straddle the line. Make use of this to optimise away some reads from the server. We need to set the zero point in the following circumstances: (1) When we see an extant remote inode and have no cache for it, we set the zero_point to i_size. (2) On local inode creation, we set zero_point to 0. (3) On local truncation down, we reduce zero_point to the new i_size if the new i_size is lower. (4) On local truncation up, we don't change zero_point. (5) On local modification, we don't change zero_point. (6) On remote invalidation, we set zero_point to the new i_size. (7) If stored data is discarded from the pagecache or culled from fscache, we must set zero_point above that if the data also got written to the server. (8) If dirty data is written back to the server, but not fscache, we must set zero_point above that. (9) If a direct I/O write is made, set zero_point above that. Assuming the above, any read from the server at or above the zero_point position will return all zeroes. The zero_point value can be stored in the cache, provided the above rules are applied to it by any code that culls part of the local cache. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2023-11-24 13:39:02 +00:00