linux/drivers/input/mouse/alps.c

3236 lines
87 KiB

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
Input: alps - use more accurate coordinates for first touch in semi-mt mode All alps semi-mt touchpads give us the following data when 2 (or more) fingers are touching: 1 more or less accurate touch for the first finger down, and a bitmap with columns and rows in which 1 or more fingers are seen resulting in a crude (low res) bounding box. So far for v3, rushmore and v4 touchpads we've been reporting the coordinates of 2 opposite corners of the box when 2 fingers are touching. Ignoring the much better resolution data given in the normal position packet. This commit actually uses this data for the first touch, figures out which corner of the bounding box is closest to the first touch, and reports the coordinates of the opposite corner for the second touch, resulting in much better data for the first touch and for the single touch pointer-emulation events. This approach is similar to the one in alps_process_bitmap_dolphin, that function takes the single accurate touch info, calculates the distance to the center of the bounding box, and then puts the 2nd touch mirrored to the center. The downside of that approach is that if both touches move slowly in the same direction, the bounding box will stay the same for a while (as it is low res) and the second touch will thus been seen moving in the opposite direction until the bounding box actually changes, and then the second touch snaps to its new position resulting in a saw tooth pattern in the coordinates for the second touch, hence this new approach. This commit fixes 2 finger scrolling being choppy / jumpy on these touchpads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:41:10 -07:00
Input: alps - use more accurate coordinates for first touch in semi-mt mode All alps semi-mt touchpads give us the following data when 2 (or more) fingers are touching: 1 more or less accurate touch for the first finger down, and a bitmap with columns and rows in which 1 or more fingers are seen resulting in a crude (low res) bounding box. So far for v3, rushmore and v4 touchpads we've been reporting the coordinates of 2 opposite corners of the box when 2 fingers are touching. Ignoring the much better resolution data given in the normal position packet. This commit actually uses this data for the first touch, figures out which corner of the bounding box is closest to the first touch, and reports the coordinates of the opposite corner for the second touch, resulting in much better data for the first touch and for the single touch pointer-emulation events. This approach is similar to the one in alps_process_bitmap_dolphin, that function takes the single accurate touch info, calculates the distance to the center of the bounding box, and then puts the 2nd touch mirrored to the center. The downside of that approach is that if both touches move slowly in the same direction, the bounding box will stay the same for a while (as it is low res) and the second touch will thus been seen moving in the opposite direction until the bounding box actually changes, and then the second touch snaps to its new position resulting in a saw tooth pattern in the coordinates for the second touch, hence this new approach. This commit fixes 2 finger scrolling being choppy / jumpy on these touchpads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:41:10 -07:00
Input: alps - use more accurate coordinates for first touch in semi-mt mode All alps semi-mt touchpads give us the following data when 2 (or more) fingers are touching: 1 more or less accurate touch for the first finger down, and a bitmap with columns and rows in which 1 or more fingers are seen resulting in a crude (low res) bounding box. So far for v3, rushmore and v4 touchpads we've been reporting the coordinates of 2 opposite corners of the box when 2 fingers are touching. Ignoring the much better resolution data given in the normal position packet. This commit actually uses this data for the first touch, figures out which corner of the bounding box is closest to the first touch, and reports the coordinates of the opposite corner for the second touch, resulting in much better data for the first touch and for the single touch pointer-emulation events. This approach is similar to the one in alps_process_bitmap_dolphin, that function takes the single accurate touch info, calculates the distance to the center of the bounding box, and then puts the 2nd touch mirrored to the center. The downside of that approach is that if both touches move slowly in the same direction, the bounding box will stay the same for a while (as it is low res) and the second touch will thus been seen moving in the opposite direction until the bounding box actually changes, and then the second touch snaps to its new position resulting in a saw tooth pattern in the coordinates for the second touch, hence this new approach. This commit fixes 2 finger scrolling being choppy / jumpy on these touchpads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:41:10 -07:00
Input: alps - use more accurate coordinates for first touch in semi-mt mode All alps semi-mt touchpads give us the following data when 2 (or more) fingers are touching: 1 more or less accurate touch for the first finger down, and a bitmap with columns and rows in which 1 or more fingers are seen resulting in a crude (low res) bounding box. So far for v3, rushmore and v4 touchpads we've been reporting the coordinates of 2 opposite corners of the box when 2 fingers are touching. Ignoring the much better resolution data given in the normal position packet. This commit actually uses this data for the first touch, figures out which corner of the bounding box is closest to the first touch, and reports the coordinates of the opposite corner for the second touch, resulting in much better data for the first touch and for the single touch pointer-emulation events. This approach is similar to the one in alps_process_bitmap_dolphin, that function takes the single accurate touch info, calculates the distance to the center of the bounding box, and then puts the 2nd touch mirrored to the center. The downside of that approach is that if both touches move slowly in the same direction, the bounding box will stay the same for a while (as it is low res) and the second touch will thus been seen moving in the opposite direction until the bounding box actually changes, and then the second touch snaps to its new position resulting in a saw tooth pattern in the coordinates for the second touch, hence this new approach. This commit fixes 2 finger scrolling being choppy / jumpy on these touchpads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:41:10 -07:00
Input: alps - use more accurate coordinates for first touch in semi-mt mode All alps semi-mt touchpads give us the following data when 2 (or more) fingers are touching: 1 more or less accurate touch for the first finger down, and a bitmap with columns and rows in which 1 or more fingers are seen resulting in a crude (low res) bounding box. So far for v3, rushmore and v4 touchpads we've been reporting the coordinates of 2 opposite corners of the box when 2 fingers are touching. Ignoring the much better resolution data given in the normal position packet. This commit actually uses this data for the first touch, figures out which corner of the bounding box is closest to the first touch, and reports the coordinates of the opposite corner for the second touch, resulting in much better data for the first touch and for the single touch pointer-emulation events. This approach is similar to the one in alps_process_bitmap_dolphin, that function takes the single accurate touch info, calculates the distance to the center of the bounding box, and then puts the 2nd touch mirrored to the center. The downside of that approach is that if both touches move slowly in the same direction, the bounding box will stay the same for a while (as it is low res) and the second touch will thus been seen moving in the opposite direction until the bounding box actually changes, and then the second touch snaps to its new position resulting in a saw tooth pattern in the coordinates for the second touch, hence this new approach. This commit fixes 2 finger scrolling being choppy / jumpy on these touchpads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:41:10 -07:00
Input: alps - use more accurate coordinates for first touch in semi-mt mode All alps semi-mt touchpads give us the following data when 2 (or more) fingers are touching: 1 more or less accurate touch for the first finger down, and a bitmap with columns and rows in which 1 or more fingers are seen resulting in a crude (low res) bounding box. So far for v3, rushmore and v4 touchpads we've been reporting the coordinates of 2 opposite corners of the box when 2 fingers are touching. Ignoring the much better resolution data given in the normal position packet. This commit actually uses this data for the first touch, figures out which corner of the bounding box is closest to the first touch, and reports the coordinates of the opposite corner for the second touch, resulting in much better data for the first touch and for the single touch pointer-emulation events. This approach is similar to the one in alps_process_bitmap_dolphin, that function takes the single accurate touch info, calculates the distance to the center of the bounding box, and then puts the 2nd touch mirrored to the center. The downside of that approach is that if both touches move slowly in the same direction, the bounding box will stay the same for a while (as it is low res) and the second touch will thus been seen moving in the opposite direction until the bounding box actually changes, and then the second touch snaps to its new position resulting in a saw tooth pattern in the coordinates for the second touch, hence this new approach. This commit fixes 2 finger scrolling being choppy / jumpy on these touchpads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:41:10 -07:00
Input: alps - use more accurate coordinates for first touch in semi-mt mode All alps semi-mt touchpads give us the following data when 2 (or more) fingers are touching: 1 more or less accurate touch for the first finger down, and a bitmap with columns and rows in which 1 or more fingers are seen resulting in a crude (low res) bounding box. So far for v3, rushmore and v4 touchpads we've been reporting the coordinates of 2 opposite corners of the box when 2 fingers are touching. Ignoring the much better resolution data given in the normal position packet. This commit actually uses this data for the first touch, figures out which corner of the bounding box is closest to the first touch, and reports the coordinates of the opposite corner for the second touch, resulting in much better data for the first touch and for the single touch pointer-emulation events. This approach is similar to the one in alps_process_bitmap_dolphin, that function takes the single accurate touch info, calculates the distance to the center of the bounding box, and then puts the 2nd touch mirrored to the center. The downside of that approach is that if both touches move slowly in the same direction, the bounding box will stay the same for a while (as it is low res) and the second touch will thus been seen moving in the opposite direction until the bounding box actually changes, and then the second touch snaps to its new position resulting in a saw tooth pattern in the coordinates for the second touch, hence this new approach. This commit fixes 2 finger scrolling being choppy / jumpy on these touchpads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:41:10 -07:00
Input: alps - use more accurate coordinates for first touch in semi-mt mode All alps semi-mt touchpads give us the following data when 2 (or more) fingers are touching: 1 more or less accurate touch for the first finger down, and a bitmap with columns and rows in which 1 or more fingers are seen resulting in a crude (low res) bounding box. So far for v3, rushmore and v4 touchpads we've been reporting the coordinates of 2 opposite corners of the box when 2 fingers are touching. Ignoring the much better resolution data given in the normal position packet. This commit actually uses this data for the first touch, figures out which corner of the bounding box is closest to the first touch, and reports the coordinates of the opposite corner for the second touch, resulting in much better data for the first touch and for the single touch pointer-emulation events. This approach is similar to the one in alps_process_bitmap_dolphin, that function takes the single accurate touch info, calculates the distance to the center of the bounding box, and then puts the 2nd touch mirrored to the center. The downside of that approach is that if both touches move slowly in the same direction, the bounding box will stay the same for a while (as it is low res) and the second touch will thus been seen moving in the opposite direction until the bounding box actually changes, and then the second touch snaps to its new position resulting in a saw tooth pattern in the coordinates for the second touch, hence this new approach. This commit fixes 2 finger scrolling being choppy / jumpy on these touchpads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:41:10 -07:00
Input: alps - use more accurate coordinates for first touch in semi-mt mode All alps semi-mt touchpads give us the following data when 2 (or more) fingers are touching: 1 more or less accurate touch for the first finger down, and a bitmap with columns and rows in which 1 or more fingers are seen resulting in a crude (low res) bounding box. So far for v3, rushmore and v4 touchpads we've been reporting the coordinates of 2 opposite corners of the box when 2 fingers are touching. Ignoring the much better resolution data given in the normal position packet. This commit actually uses this data for the first touch, figures out which corner of the bounding box is closest to the first touch, and reports the coordinates of the opposite corner for the second touch, resulting in much better data for the first touch and for the single touch pointer-emulation events. This approach is similar to the one in alps_process_bitmap_dolphin, that function takes the single accurate touch info, calculates the distance to the center of the bounding box, and then puts the 2nd touch mirrored to the center. The downside of that approach is that if both touches move slowly in the same direction, the bounding box will stay the same for a while (as it is low res) and the second touch will thus been seen moving in the opposite direction until the bounding box actually changes, and then the second touch snaps to its new position resulting in a saw tooth pattern in the coordinates for the second touch, hence this new approach. This commit fixes 2 finger scrolling being choppy / jumpy on these touchpads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:41:10 -07:00
Input: alps - use more accurate coordinates for first touch in semi-mt mode All alps semi-mt touchpads give us the following data when 2 (or more) fingers are touching: 1 more or less accurate touch for the first finger down, and a bitmap with columns and rows in which 1 or more fingers are seen resulting in a crude (low res) bounding box. So far for v3, rushmore and v4 touchpads we've been reporting the coordinates of 2 opposite corners of the box when 2 fingers are touching. Ignoring the much better resolution data given in the normal position packet. This commit actually uses this data for the first touch, figures out which corner of the bounding box is closest to the first touch, and reports the coordinates of the opposite corner for the second touch, resulting in much better data for the first touch and for the single touch pointer-emulation events. This approach is similar to the one in alps_process_bitmap_dolphin, that function takes the single accurate touch info, calculates the distance to the center of the bounding box, and then puts the 2nd touch mirrored to the center. The downside of that approach is that if both touches move slowly in the same direction, the bounding box will stay the same for a while (as it is low res) and the second touch will thus been seen moving in the opposite direction until the bounding box actually changes, and then the second touch snaps to its new position resulting in a saw tooth pattern in the coordinates for the second touch, hence this new approach. This commit fixes 2 finger scrolling being choppy / jumpy on these touchpads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:41:10 -07:00
Input: ALPS - fix multi-touch decoding on SS4 plus touchpads The fix for handling two-finger scroll (i4a646580f793 - "Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad") introduced a minor "typo" that broke decoding of multi-touch events are decoded on some ALPS touchpads. For example, tapping with three-fingers can no longer be used to emulate middle-mouse-button (the kernel doesn't recognize this as the proper event, and doesn't report it correctly to userspace). This affects touchpads that use SS4 "plus" protocol variant, like those found on Dell E7270 & E7470 laptops (tested on E7270). First, probably the code in alps_decode_ss4_v2() for case SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see 0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part. Second, in the previous patch, new macros were introduced to decode X coordinates specific to the SS4 "plus" variant, but the macro to define the maximum X value wasn't changed accordingly. The macros to decode X values for "plus" variant are effectively shifted right by 1 bit, but the max wasn't shifted too. This causes the driver to incorrectly handle "no data" cases, which also interfered with how multi-touch was handled. Fixes: 4a646580f793 ("Input: ALPS - fix two-finger scroll breakage...") Signed-off-by: Nir Perry <nirperry@gmail.com> Reviewed-by: Masaki Ota <masaki.ota@jp.alps.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-11 23:43:26 -08:00
Input: ALPS - fix multi-touch decoding on SS4 plus touchpads The fix for handling two-finger scroll (i4a646580f793 - "Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad") introduced a minor "typo" that broke decoding of multi-touch events are decoded on some ALPS touchpads. For example, tapping with three-fingers can no longer be used to emulate middle-mouse-button (the kernel doesn't recognize this as the proper event, and doesn't report it correctly to userspace). This affects touchpads that use SS4 "plus" protocol variant, like those found on Dell E7270 & E7470 laptops (tested on E7270). First, probably the code in alps_decode_ss4_v2() for case SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see 0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part. Second, in the previous patch, new macros were introduced to decode X coordinates specific to the SS4 "plus" variant, but the macro to define the maximum X value wasn't changed accordingly. The macros to decode X values for "plus" variant are effectively shifted right by 1 bit, but the max wasn't shifted too. This causes the driver to incorrectly handle "no data" cases, which also interfered with how multi-touch was handled. Fixes: 4a646580f793 ("Input: ALPS - fix two-finger scroll breakage...") Signed-off-by: Nir Perry <nirperry@gmail.com> Reviewed-by: Masaki Ota <masaki.ota@jp.alps.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-11 23:43:26 -08:00
Input: ALPS - fix multi-touch decoding on SS4 plus touchpads The fix for handling two-finger scroll (i4a646580f793 - "Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad") introduced a minor "typo" that broke decoding of multi-touch events are decoded on some ALPS touchpads. For example, tapping with three-fingers can no longer be used to emulate middle-mouse-button (the kernel doesn't recognize this as the proper event, and doesn't report it correctly to userspace). This affects touchpads that use SS4 "plus" protocol variant, like those found on Dell E7270 & E7470 laptops (tested on E7270). First, probably the code in alps_decode_ss4_v2() for case SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see 0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part. Second, in the previous patch, new macros were introduced to decode X coordinates specific to the SS4 "plus" variant, but the macro to define the maximum X value wasn't changed accordingly. The macros to decode X values for "plus" variant are effectively shifted right by 1 bit, but the max wasn't shifted too. This causes the driver to incorrectly handle "no data" cases, which also interfered with how multi-touch was handled. Fixes: 4a646580f793 ("Input: ALPS - fix two-finger scroll breakage...") Signed-off-by: Nir Perry <nirperry@gmail.com> Reviewed-by: Masaki Ota <masaki.ota@jp.alps.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-11 23:43:26 -08:00
Input: ALPS - fix multi-touch decoding on SS4 plus touchpads The fix for handling two-finger scroll (i4a646580f793 - "Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad") introduced a minor "typo" that broke decoding of multi-touch events are decoded on some ALPS touchpads. For example, tapping with three-fingers can no longer be used to emulate middle-mouse-button (the kernel doesn't recognize this as the proper event, and doesn't report it correctly to userspace). This affects touchpads that use SS4 "plus" protocol variant, like those found on Dell E7270 & E7470 laptops (tested on E7270). First, probably the code in alps_decode_ss4_v2() for case SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see 0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part. Second, in the previous patch, new macros were introduced to decode X coordinates specific to the SS4 "plus" variant, but the macro to define the maximum X value wasn't changed accordingly. The macros to decode X values for "plus" variant are effectively shifted right by 1 bit, but the max wasn't shifted too. This causes the driver to incorrectly handle "no data" cases, which also interfered with how multi-touch was handled. Fixes: 4a646580f793 ("Input: ALPS - fix two-finger scroll breakage...") Signed-off-by: Nir Perry <nirperry@gmail.com> Reviewed-by: Masaki Ota <masaki.ota@jp.alps.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-11 23:43:26 -08:00
Input: ALPS - fix multi-touch decoding on SS4 plus touchpads The fix for handling two-finger scroll (i4a646580f793 - "Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad") introduced a minor "typo" that broke decoding of multi-touch events are decoded on some ALPS touchpads. For example, tapping with three-fingers can no longer be used to emulate middle-mouse-button (the kernel doesn't recognize this as the proper event, and doesn't report it correctly to userspace). This affects touchpads that use SS4 "plus" protocol variant, like those found on Dell E7270 & E7470 laptops (tested on E7270). First, probably the code in alps_decode_ss4_v2() for case SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see 0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part. Second, in the previous patch, new macros were introduced to decode X coordinates specific to the SS4 "plus" variant, but the macro to define the maximum X value wasn't changed accordingly. The macros to decode X values for "plus" variant are effectively shifted right by 1 bit, but the max wasn't shifted too. This causes the driver to incorrectly handle "no data" cases, which also interfered with how multi-touch was handled. Fixes: 4a646580f793 ("Input: ALPS - fix two-finger scroll breakage...") Signed-off-by: Nir Perry <nirperry@gmail.com> Reviewed-by: Masaki Ota <masaki.ota@jp.alps.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-11 23:43:26 -08:00
Input: ALPS - fix multi-touch decoding on SS4 plus touchpads The fix for handling two-finger scroll (i4a646580f793 - "Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad") introduced a minor "typo" that broke decoding of multi-touch events are decoded on some ALPS touchpads. For example, tapping with three-fingers can no longer be used to emulate middle-mouse-button (the kernel doesn't recognize this as the proper event, and doesn't report it correctly to userspace). This affects touchpads that use SS4 "plus" protocol variant, like those found on Dell E7270 & E7470 laptops (tested on E7270). First, probably the code in alps_decode_ss4_v2() for case SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see 0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part. Second, in the previous patch, new macros were introduced to decode X coordinates specific to the SS4 "plus" variant, but the macro to define the maximum X value wasn't changed accordingly. The macros to decode X values for "plus" variant are effectively shifted right by 1 bit, but the max wasn't shifted too. This causes the driver to incorrectly handle "no data" cases, which also interfered with how multi-touch was handled. Fixes: 4a646580f793 ("Input: ALPS - fix two-finger scroll breakage...") Signed-off-by: Nir Perry <nirperry@gmail.com> Reviewed-by: Masaki Ota <masaki.ota@jp.alps.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-11 23:43:26 -08:00
Input: alps - fix touchpad buttons getting stuck when used with trackpoint When the left touchpad button gets pressed, and then the trackpoint is moved, and then the button is released, the following happens: 1) touchpad packet is received, touchpad evdev node reports BTN_LEFT 1 2) pointing stick packet is received, the hw will report a BTN_LEFT 1 in this packet because when the trackstick is active it communicates the combined touchpad + pointing stick buttons in the trackstick packet, since alps_report_bare_ps2_packet passes NULL (*) for the dev2 parameter to alps_report_buttons the combining is not detected and the pointing stick evdev node will also report BTN_LEFT 1 3) on release of the button a pointing stick packet with BTN_LEFT 0 is received and the pointing stick evdev node will report BTN_LEFT 0 Note how because of the passing as NULL for dev2 the touchpad evdev node will never send BTN_LEFT 0 in this scenario leading to a stuck mouse button. This is a regression in 4.0 introduced by commit 04aae283ba6a8 ("Input: ALPS - do not mix trackstick and external PS/2 mouse data") This commit fixes this by passing in the touchpad evdev as dev2 parameter when calling alps_report_buttons for the pointingstick on alps v2 devices, so that alps_report_buttons correctly detect that we're already reporting the button as pressed via the touchpad evdev node, and will also send the release event there. Cc: stable@vger.kernel.org # 4.0 Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-08 09:26:42 -07:00
Input: alps - fix touchpad buttons getting stuck when used with trackpoint When the left touchpad button gets pressed, and then the trackpoint is moved, and then the button is released, the following happens: 1) touchpad packet is received, touchpad evdev node reports BTN_LEFT 1 2) pointing stick packet is received, the hw will report a BTN_LEFT 1 in this packet because when the trackstick is active it communicates the combined touchpad + pointing stick buttons in the trackstick packet, since alps_report_bare_ps2_packet passes NULL (*) for the dev2 parameter to alps_report_buttons the combining is not detected and the pointing stick evdev node will also report BTN_LEFT 1 3) on release of the button a pointing stick packet with BTN_LEFT 0 is received and the pointing stick evdev node will report BTN_LEFT 0 Note how because of the passing as NULL for dev2 the touchpad evdev node will never send BTN_LEFT 0 in this scenario leading to a stuck mouse button. This is a regression in 4.0 introduced by commit 04aae283ba6a8 ("Input: ALPS - do not mix trackstick and external PS/2 mouse data") This commit fixes this by passing in the touchpad evdev as dev2 parameter when calling alps_report_buttons for the pointingstick on alps v2 devices, so that alps_report_buttons correctly detect that we're already reporting the button as pressed via the touchpad evdev node, and will also send the release event there. Cc: stable@vger.kernel.org # 4.0 Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-08 09:26:42 -07:00
Input: alps - fix touchpad buttons getting stuck when used with trackpoint When the left touchpad button gets pressed, and then the trackpoint is moved, and then the button is released, the following happens: 1) touchpad packet is received, touchpad evdev node reports BTN_LEFT 1 2) pointing stick packet is received, the hw will report a BTN_LEFT 1 in this packet because when the trackstick is active it communicates the combined touchpad + pointing stick buttons in the trackstick packet, since alps_report_bare_ps2_packet passes NULL (*) for the dev2 parameter to alps_report_buttons the combining is not detected and the pointing stick evdev node will also report BTN_LEFT 1 3) on release of the button a pointing stick packet with BTN_LEFT 0 is received and the pointing stick evdev node will report BTN_LEFT 0 Note how because of the passing as NULL for dev2 the touchpad evdev node will never send BTN_LEFT 0 in this scenario leading to a stuck mouse button. This is a regression in 4.0 introduced by commit 04aae283ba6a8 ("Input: ALPS - do not mix trackstick and external PS/2 mouse data") This commit fixes this by passing in the touchpad evdev as dev2 parameter when calling alps_report_buttons for the pointingstick on alps v2 devices, so that alps_report_buttons correctly detect that we're already reporting the button as pressed via the touchpad evdev node, and will also send the release event there. Cc: stable@vger.kernel.org # 4.0 Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-08 09:26:42 -07:00
Input: alps - ignore potential bare packets when device is out of sync 5th and 6th byte of ALPS trackstick V3 protocol match condition for first byte of PS/2 3 bytes packet. When driver enters out of sync state and ALPS trackstick is sending data then driver match 5th, 6th and next 1st bytes as PS/2. It basically means if user is using trackstick when driver is in out of sync state driver will never resync. Processing these bytes as 3 bytes PS/2 data cause total mess (random cursor movements, random clicks) and make trackstick unusable until psmouse driver decide to do full device reset. Lot of users reported problems with ALPS devices on Dell Latitude E6440, E6540 and E7440 laptops. ALPS device or Dell EC for unknown reason send some invalid ALPS PS/2 bytes which cause driver out of sync. It looks like that i8042 and psmouse/alps driver always receive group of 6 bytes packets so there are no missing bytes and no bytes were inserted between valid ones. This patch does not fix root of problem with ALPS devices found in Dell Latitude laptops but it does not allow to process some (invalid) subsequence of 6 bytes ALPS packets as 3 bytes PS/2 when driver is out of sync. So with this patch trackstick input device does not report bogus data when also driver is out of sync, so trackstick should be usable on those machines. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08 12:45:23 -08:00
Input: alps - ignore potential bare packets when device is out of sync 5th and 6th byte of ALPS trackstick V3 protocol match condition for first byte of PS/2 3 bytes packet. When driver enters out of sync state and ALPS trackstick is sending data then driver match 5th, 6th and next 1st bytes as PS/2. It basically means if user is using trackstick when driver is in out of sync state driver will never resync. Processing these bytes as 3 bytes PS/2 data cause total mess (random cursor movements, random clicks) and make trackstick unusable until psmouse driver decide to do full device reset. Lot of users reported problems with ALPS devices on Dell Latitude E6440, E6540 and E7440 laptops. ALPS device or Dell EC for unknown reason send some invalid ALPS PS/2 bytes which cause driver out of sync. It looks like that i8042 and psmouse/alps driver always receive group of 6 bytes packets so there are no missing bytes and no bytes were inserted between valid ones. This patch does not fix root of problem with ALPS devices found in Dell Latitude laptops but it does not allow to process some (invalid) subsequence of 6 bytes ALPS packets as 3 bytes PS/2 when driver is out of sync. So with this patch trackstick input device does not report bogus data when also driver is out of sync, so trackstick should be usable on those machines. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08 12:45:23 -08:00
Input: alps - demystify trackstick initialization for v3 and v6 protocols Remove cite "Not sure what this does, but it is absolutely essential". Extract initialization of trackstick part when touchpad is in passthrough mode for v3 and v6 protocols into own function. Initialization for v3 is: setscale11, setscale11, setscale11, nibble 0x9, nibble 0x4. Initialization for v6 is: setscale11, setscale11, setscale11, setrate 0xC8, setrate 0x14. Nibbles 0x9 and 0x4 for v3 protocol correspond to setrate 0xC8 and 0x14, therefore these sequences are same. When touchpad is in passthrough mode, then OS communicates with trackstick and this sequence is some magic vendor PS/2 command to put trackstick into "extended" mode. After that sequence trackstick starts reporting packets in some vendor 4 bytes format (first byte is always 0xE8). Next step after configuring trackstick to be in "extended" mode, is to configure touchpad for v3 protocol to expect that trackstick reports data in "extended" mode. For v3 protocol this is done by setting bit 1 in register 0xC2C8 (offset 0x08 from base address 0xC2C0). When both touchpad and trackstick are not configured for "extended" mode then touchpad reports trackstick packets in different format, which is not supported by psmouse/alps driver (yet). In Cirque documentation GP-AN- 130823 INTERFACING TO GEN4 OVER I2C (PDF) available at http://www.cirque.com/gen4-dev-resources is Logical Address 0xC2C8 named as PS2AuxControl and Bit Number 1 as ProcessAuxExtendedData with description: Auxiliary device data is assumed to be extended data when set. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:30:39 -07:00
Input: alps - demystify trackstick initialization for v3 and v6 protocols Remove cite "Not sure what this does, but it is absolutely essential". Extract initialization of trackstick part when touchpad is in passthrough mode for v3 and v6 protocols into own function. Initialization for v3 is: setscale11, setscale11, setscale11, nibble 0x9, nibble 0x4. Initialization for v6 is: setscale11, setscale11, setscale11, setrate 0xC8, setrate 0x14. Nibbles 0x9 and 0x4 for v3 protocol correspond to setrate 0xC8 and 0x14, therefore these sequences are same. When touchpad is in passthrough mode, then OS communicates with trackstick and this sequence is some magic vendor PS/2 command to put trackstick into "extended" mode. After that sequence trackstick starts reporting packets in some vendor 4 bytes format (first byte is always 0xE8). Next step after configuring trackstick to be in "extended" mode, is to configure touchpad for v3 protocol to expect that trackstick reports data in "extended" mode. For v3 protocol this is done by setting bit 1 in register 0xC2C8 (offset 0x08 from base address 0xC2C0). When both touchpad and trackstick are not configured for "extended" mode then touchpad reports trackstick packets in different format, which is not supported by psmouse/alps driver (yet). In Cirque documentation GP-AN- 130823 INTERFACING TO GEN4 OVER I2C (PDF) available at http://www.cirque.com/gen4-dev-resources is Logical Address 0xC2C8 named as PS2AuxControl and Bit Number 1 as ProcessAuxExtendedData with description: Auxiliary device data is assumed to be extended data when set. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:30:39 -07:00
Input: alps - demystify trackstick initialization for v3 and v6 protocols Remove cite "Not sure what this does, but it is absolutely essential". Extract initialization of trackstick part when touchpad is in passthrough mode for v3 and v6 protocols into own function. Initialization for v3 is: setscale11, setscale11, setscale11, nibble 0x9, nibble 0x4. Initialization for v6 is: setscale11, setscale11, setscale11, setrate 0xC8, setrate 0x14. Nibbles 0x9 and 0x4 for v3 protocol correspond to setrate 0xC8 and 0x14, therefore these sequences are same. When touchpad is in passthrough mode, then OS communicates with trackstick and this sequence is some magic vendor PS/2 command to put trackstick into "extended" mode. After that sequence trackstick starts reporting packets in some vendor 4 bytes format (first byte is always 0xE8). Next step after configuring trackstick to be in "extended" mode, is to configure touchpad for v3 protocol to expect that trackstick reports data in "extended" mode. For v3 protocol this is done by setting bit 1 in register 0xC2C8 (offset 0x08 from base address 0xC2C0). When both touchpad and trackstick are not configured for "extended" mode then touchpad reports trackstick packets in different format, which is not supported by psmouse/alps driver (yet). In Cirque documentation GP-AN- 130823 INTERFACING TO GEN4 OVER I2C (PDF) available at http://www.cirque.com/gen4-dev-resources is Logical Address 0xC2C8 named as PS2AuxControl and Bit Number 1 as ProcessAuxExtendedData with description: Auxiliary device data is assumed to be extended data when set. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:30:39 -07:00
Input: alps - demystify trackstick initialization for v3 and v6 protocols Remove cite "Not sure what this does, but it is absolutely essential". Extract initialization of trackstick part when touchpad is in passthrough mode for v3 and v6 protocols into own function. Initialization for v3 is: setscale11, setscale11, setscale11, nibble 0x9, nibble 0x4. Initialization for v6 is: setscale11, setscale11, setscale11, setrate 0xC8, setrate 0x14. Nibbles 0x9 and 0x4 for v3 protocol correspond to setrate 0xC8 and 0x14, therefore these sequences are same. When touchpad is in passthrough mode, then OS communicates with trackstick and this sequence is some magic vendor PS/2 command to put trackstick into "extended" mode. After that sequence trackstick starts reporting packets in some vendor 4 bytes format (first byte is always 0xE8). Next step after configuring trackstick to be in "extended" mode, is to configure touchpad for v3 protocol to expect that trackstick reports data in "extended" mode. For v3 protocol this is done by setting bit 1 in register 0xC2C8 (offset 0x08 from base address 0xC2C0). When both touchpad and trackstick are not configured for "extended" mode then touchpad reports trackstick packets in different format, which is not supported by psmouse/alps driver (yet). In Cirque documentation GP-AN- 130823 INTERFACING TO GEN4 OVER I2C (PDF) available at http://www.cirque.com/gen4-dev-resources is Logical Address 0xC2C8 named as PS2AuxControl and Bit Number 1 as ProcessAuxExtendedData with description: Auxiliary device data is assumed to be extended data when set. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:30:39 -07:00
Input: alps - demystify trackstick initialization for v3 and v6 protocols Remove cite "Not sure what this does, but it is absolutely essential". Extract initialization of trackstick part when touchpad is in passthrough mode for v3 and v6 protocols into own function. Initialization for v3 is: setscale11, setscale11, setscale11, nibble 0x9, nibble 0x4. Initialization for v6 is: setscale11, setscale11, setscale11, setrate 0xC8, setrate 0x14. Nibbles 0x9 and 0x4 for v3 protocol correspond to setrate 0xC8 and 0x14, therefore these sequences are same. When touchpad is in passthrough mode, then OS communicates with trackstick and this sequence is some magic vendor PS/2 command to put trackstick into "extended" mode. After that sequence trackstick starts reporting packets in some vendor 4 bytes format (first byte is always 0xE8). Next step after configuring trackstick to be in "extended" mode, is to configure touchpad for v3 protocol to expect that trackstick reports data in "extended" mode. For v3 protocol this is done by setting bit 1 in register 0xC2C8 (offset 0x08 from base address 0xC2C0). When both touchpad and trackstick are not configured for "extended" mode then touchpad reports trackstick packets in different format, which is not supported by psmouse/alps driver (yet). In Cirque documentation GP-AN- 130823 INTERFACING TO GEN4 OVER I2C (PDF) available at http://www.cirque.com/gen4-dev-resources is Logical Address 0xC2C8 named as PS2AuxControl and Bit Number 1 as ProcessAuxExtendedData with description: Auxiliary device data is assumed to be extended data when set. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:30:39 -07:00
Input: alps - demystify trackstick initialization for v3 and v6 protocols Remove cite "Not sure what this does, but it is absolutely essential". Extract initialization of trackstick part when touchpad is in passthrough mode for v3 and v6 protocols into own function. Initialization for v3 is: setscale11, setscale11, setscale11, nibble 0x9, nibble 0x4. Initialization for v6 is: setscale11, setscale11, setscale11, setrate 0xC8, setrate 0x14. Nibbles 0x9 and 0x4 for v3 protocol correspond to setrate 0xC8 and 0x14, therefore these sequences are same. When touchpad is in passthrough mode, then OS communicates with trackstick and this sequence is some magic vendor PS/2 command to put trackstick into "extended" mode. After that sequence trackstick starts reporting packets in some vendor 4 bytes format (first byte is always 0xE8). Next step after configuring trackstick to be in "extended" mode, is to configure touchpad for v3 protocol to expect that trackstick reports data in "extended" mode. For v3 protocol this is done by setting bit 1 in register 0xC2C8 (offset 0x08 from base address 0xC2C0). When both touchpad and trackstick are not configured for "extended" mode then touchpad reports trackstick packets in different format, which is not supported by psmouse/alps driver (yet). In Cirque documentation GP-AN- 130823 INTERFACING TO GEN4 OVER I2C (PDF) available at http://www.cirque.com/gen4-dev-resources is Logical Address 0xC2C8 named as PS2AuxControl and Bit Number 1 as ProcessAuxExtendedData with description: Auxiliary device data is assumed to be extended data when set. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:30:39 -07:00
Input: alps - demystify trackstick initialization for v3 and v6 protocols Remove cite "Not sure what this does, but it is absolutely essential". Extract initialization of trackstick part when touchpad is in passthrough mode for v3 and v6 protocols into own function. Initialization for v3 is: setscale11, setscale11, setscale11, nibble 0x9, nibble 0x4. Initialization for v6 is: setscale11, setscale11, setscale11, setrate 0xC8, setrate 0x14. Nibbles 0x9 and 0x4 for v3 protocol correspond to setrate 0xC8 and 0x14, therefore these sequences are same. When touchpad is in passthrough mode, then OS communicates with trackstick and this sequence is some magic vendor PS/2 command to put trackstick into "extended" mode. After that sequence trackstick starts reporting packets in some vendor 4 bytes format (first byte is always 0xE8). Next step after configuring trackstick to be in "extended" mode, is to configure touchpad for v3 protocol to expect that trackstick reports data in "extended" mode. For v3 protocol this is done by setting bit 1 in register 0xC2C8 (offset 0x08 from base address 0xC2C0). When both touchpad and trackstick are not configured for "extended" mode then touchpad reports trackstick packets in different format, which is not supported by psmouse/alps driver (yet). In Cirque documentation GP-AN- 130823 INTERFACING TO GEN4 OVER I2C (PDF) available at http://www.cirque.com/gen4-dev-resources is Logical Address 0xC2C8 named as PS2AuxControl and Bit Number 1 as ProcessAuxExtendedData with description: Auxiliary device data is assumed to be extended data when set. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:30:39 -07:00
Input: alps - demystify trackstick initialization for v3 and v6 protocols Remove cite "Not sure what this does, but it is absolutely essential". Extract initialization of trackstick part when touchpad is in passthrough mode for v3 and v6 protocols into own function. Initialization for v3 is: setscale11, setscale11, setscale11, nibble 0x9, nibble 0x4. Initialization for v6 is: setscale11, setscale11, setscale11, setrate 0xC8, setrate 0x14. Nibbles 0x9 and 0x4 for v3 protocol correspond to setrate 0xC8 and 0x14, therefore these sequences are same. When touchpad is in passthrough mode, then OS communicates with trackstick and this sequence is some magic vendor PS/2 command to put trackstick into "extended" mode. After that sequence trackstick starts reporting packets in some vendor 4 bytes format (first byte is always 0xE8). Next step after configuring trackstick to be in "extended" mode, is to configure touchpad for v3 protocol to expect that trackstick reports data in "extended" mode. For v3 protocol this is done by setting bit 1 in register 0xC2C8 (offset 0x08 from base address 0xC2C0). When both touchpad and trackstick are not configured for "extended" mode then touchpad reports trackstick packets in different format, which is not supported by psmouse/alps driver (yet). In Cirque documentation GP-AN- 130823 INTERFACING TO GEN4 OVER I2C (PDF) available at http://www.cirque.com/gen4-dev-resources is Logical Address 0xC2C8 named as PS2AuxControl and Bit Number 1 as ProcessAuxExtendedData with description: Auxiliary device data is assumed to be extended data when set. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:30:39 -07:00
Input: alps - demystify trackstick initialization for v3 and v6 protocols Remove cite "Not sure what this does, but it is absolutely essential". Extract initialization of trackstick part when touchpad is in passthrough mode for v3 and v6 protocols into own function. Initialization for v3 is: setscale11, setscale11, setscale11, nibble 0x9, nibble 0x4. Initialization for v6 is: setscale11, setscale11, setscale11, setrate 0xC8, setrate 0x14. Nibbles 0x9 and 0x4 for v3 protocol correspond to setrate 0xC8 and 0x14, therefore these sequences are same. When touchpad is in passthrough mode, then OS communicates with trackstick and this sequence is some magic vendor PS/2 command to put trackstick into "extended" mode. After that sequence trackstick starts reporting packets in some vendor 4 bytes format (first byte is always 0xE8). Next step after configuring trackstick to be in "extended" mode, is to configure touchpad for v3 protocol to expect that trackstick reports data in "extended" mode. For v3 protocol this is done by setting bit 1 in register 0xC2C8 (offset 0x08 from base address 0xC2C0). When both touchpad and trackstick are not configured for "extended" mode then touchpad reports trackstick packets in different format, which is not supported by psmouse/alps driver (yet). In Cirque documentation GP-AN- 130823 INTERFACING TO GEN4 OVER I2C (PDF) available at http://www.cirque.com/gen4-dev-resources is Logical Address 0xC2C8 named as PS2AuxControl and Bit Number 1 as ProcessAuxExtendedData with description: Auxiliary device data is assumed to be extended data when set. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:30:39 -07:00
Input: alps - demystify trackstick initialization for v3 and v6 protocols Remove cite "Not sure what this does, but it is absolutely essential". Extract initialization of trackstick part when touchpad is in passthrough mode for v3 and v6 protocols into own function. Initialization for v3 is: setscale11, setscale11, setscale11, nibble 0x9, nibble 0x4. Initialization for v6 is: setscale11, setscale11, setscale11, setrate 0xC8, setrate 0x14. Nibbles 0x9 and 0x4 for v3 protocol correspond to setrate 0xC8 and 0x14, therefore these sequences are same. When touchpad is in passthrough mode, then OS communicates with trackstick and this sequence is some magic vendor PS/2 command to put trackstick into "extended" mode. After that sequence trackstick starts reporting packets in some vendor 4 bytes format (first byte is always 0xE8). Next step after configuring trackstick to be in "extended" mode, is to configure touchpad for v3 protocol to expect that trackstick reports data in "extended" mode. For v3 protocol this is done by setting bit 1 in register 0xC2C8 (offset 0x08 from base address 0xC2C0). When both touchpad and trackstick are not configured for "extended" mode then touchpad reports trackstick packets in different format, which is not supported by psmouse/alps driver (yet). In Cirque documentation GP-AN- 130823 INTERFACING TO GEN4 OVER I2C (PDF) available at http://www.cirque.com/gen4-dev-resources is Logical Address 0xC2C8 named as PS2AuxControl and Bit Number 1 as ProcessAuxExtendedData with description: Auxiliary device data is assumed to be extended data when set. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:30:39 -07:00
Input: alps - demystify trackstick initialization for v3 and v6 protocols Remove cite "Not sure what this does, but it is absolutely essential". Extract initialization of trackstick part when touchpad is in passthrough mode for v3 and v6 protocols into own function. Initialization for v3 is: setscale11, setscale11, setscale11, nibble 0x9, nibble 0x4. Initialization for v6 is: setscale11, setscale11, setscale11, setrate 0xC8, setrate 0x14. Nibbles 0x9 and 0x4 for v3 protocol correspond to setrate 0xC8 and 0x14, therefore these sequences are same. When touchpad is in passthrough mode, then OS communicates with trackstick and this sequence is some magic vendor PS/2 command to put trackstick into "extended" mode. After that sequence trackstick starts reporting packets in some vendor 4 bytes format (first byte is always 0xE8). Next step after configuring trackstick to be in "extended" mode, is to configure touchpad for v3 protocol to expect that trackstick reports data in "extended" mode. For v3 protocol this is done by setting bit 1 in register 0xC2C8 (offset 0x08 from base address 0xC2C0). When both touchpad and trackstick are not configured for "extended" mode then touchpad reports trackstick packets in different format, which is not supported by psmouse/alps driver (yet). In Cirque documentation GP-AN- 130823 INTERFACING TO GEN4 OVER I2C (PDF) available at http://www.cirque.com/gen4-dev-resources is Logical Address 0xC2C8 named as PS2AuxControl and Bit Number 1 as ProcessAuxExtendedData with description: Auxiliary device data is assumed to be extended data when set. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:30:39 -07:00