linux/fs/afs/dynroot.c

405 lines
9.8 KiB

afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 20:51:51 +01:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 20:51:51 +01:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 20:51:51 +01:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 20:51:51 +01:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 20:51:51 +01:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 20:51:51 +01:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 20:51:51 +01:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 20:51:51 +01:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Simplify cell record handling Simplify afs_cell record handling to avoid very occasional races that cause module removal to hang (it waits for all cell records to be removed). There are two things that particularly contribute to the difficulty: firstly, the code tries to pass a ref on the cell to the cell's maintenance work item (which gets awkward if the work item is already queued); and, secondly, there's an overall cell manager that tries to use just one timer for the entire cell collection (to avoid having loads of timers). However, both of these are probably unnecessarily restrictive. To simplify this, the following changes are made: (1) The cell record collection manager is removed. Each cell record manages itself individually. (2) Each afs_cell is given a second work item (cell->destroyer) that is queued when its refcount reaches zero. This is not done in the context of the putting thread as it might be in an inconvenient place to sleep. (3) Each afs_cell is given its own timer. The timer is used to expire the cell record after a period of unuse if not otherwise pinned and can also be used for other maintenance tasks if necessary (of which there are currently none as DNS refresh is triggered by filesystem operations). (4) The afs_cell manager work item (cell->manager) is no longer given a ref on the cell when queued; rather, the manager must be deleted. This does away with the need to deal with the consequences of losing a race to queue cell->manager. Clean up of extra queuing is deferred to the destroyer. (5) The cell destroyer work item makes sure the cell timer is removed and that the normal cell work is cancelled before farming the actual destruction off to RCU. (6) When a network namespace is destroyed or the kafs module is unloaded, it's now a simple matter of marking the namespace as dead then just waking up all the cell work items. They will then remove and destroy themselves once all remaining activity counts and/or a ref counts are dropped. This makes sure that all server records are dropped first. (7) The cell record state set is reduced to just four states: SETTING_UP, ACTIVE, REMOVING and DEAD. The record persists in the active state even when it's not being used until the time comes to remove it rather than downgrading it to an inactive state from whence it can be restored. This means that the cell still appears in /proc and /afs when not in use until it switches to the REMOVING state - at which point it is removed. Note that the REMOVING state is included so that someone wanting to resurrect the cell record is forced to wait whilst the cell is torn down in that state. Once it's in the DEAD state, it has been removed from net->cells tree and is no longer findable and can be replaced. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-16-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-12-dhowells@redhat.com/ # v4
2025-02-24 16:06:03 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00
afs: Fix NULL deref in afs_dynroot_depopulate() If an error occurs during the construction of an afs superblock, it's possible that an error occurs after a superblock is created, but before we've created the root dentry. If the superblock has a dynamic root (ie. what's normally mounted on /afs), the afs_kill_super() will call afs_dynroot_depopulate() to unpin any created dentries - but this will oops if the root hasn't been created yet. Fix this by skipping that bit of code if there is no root dentry. This leads to an oops looking like: general protection fault, ... KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] ... RIP: 0010:afs_dynroot_depopulate+0x25f/0x529 fs/afs/dynroot.c:385 ... Call Trace: afs_kill_super+0x13b/0x180 fs/afs/super.c:535 deactivate_locked_super+0x94/0x160 fs/super.c:335 afs_get_tree+0x1124/0x1460 fs/afs/super.c:598 vfs_get_tree+0x89/0x2f0 fs/super.c:1547 do_new_mount fs/namespace.c:2875 [inline] path_mount+0x1387/0x2070 fs/namespace.c:3192 do_mount fs/namespace.c:3205 [inline] __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount fs/namespace.c:3390 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 which is oopsing on this line: inode_lock(root->d_inode); presumably because sb->s_root was NULL. Fixes: 0da0b7fd73e4 ("afs: Display manually added cells in dynamic root mount") Reported-by: syzbot+c1eff8205244ae7e11a6@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-21 10:15:12 +01:00
afs: Change dynroot to create contents on demand Change the AFS dynamic root to do things differently: (1) Rather than having the creation of cell records create inodes and dentries for cell mountpoints, create them on demand during lookup. This simplifies cell management and locking as we no longer have to create these objects in advance *and* on speculative lookup by the user for a cell that isn't precreated. (2) Rather than using the libfs dentry-based readdir (the dentries now no longer exist until accessed from (1)), have readdir generate the contents by reading the list of cells. The @cell symlinks get pushed in positions 2 and 3 if rootcell has been configured. (3) Make the @cell symlink dentries persist for the life of the superblock or until reclaimed, but make cell mountpoints disappear immediately if unused. It's not perfect as someone doing an "ls -l /afs" may create a whole bunch of dentries which will be garbage collected immediately. But any dentry that gets automounted will be pinned by the mount, so it shouldn't be too bad. (4) Allocate the inode numbers for the cell mountpoints from an IDR to prevent duplicates appearing in the event it cycles round. The number allocated from the IDR is doubled to provide two inode numbers - one for the normal cell name (RO) and one for the dotted cell name (RW). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1 Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
2025-02-24 09:52:58 +00:00