linux/include/drm/drm_mode_config.h

986 lines
33 KiB

drm: rework delayed connector cleanup in connector_iter PROBE_DEFER also uses system_wq to reprobe drivers, which means when that again fails, and we try to flush the overall system_wq (to get all the delayed connectore cleanup work_struct completed), we deadlock. Fix this by using just a single cleanup work, so that we can only flush that one and don't block on anything else. That means a free list plus locking, a standard pattern. v2: - Correctly free connectors only on last ref. Oops (Chris). - use llist_head/node (Chris). v3 - Add init_llist_head (Chris). Fixes: a703c55004e1 ("drm: safely free connectors from connector_iter") Fixes: 613051dac40d ("drm: locking&new iterators for connector_list") Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Dave Airlie <airlied@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sean Paul <seanpaul@chromium.org> Cc: <stable@vger.kernel.org> # v4.11+: 613051dac40d ("drm: locking&new iterators for connector_list" Cc: <stable@vger.kernel.org> # v4.11+ Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: David Airlie <airlied@linux.ie> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Guillaume Tucker <guillaume.tucker@collabora.com> Cc: Mark Brown <broonie@kernel.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Matt Hart <matthew.hart@linaro.org> Cc: Thierry Escande <thierry.escande@collabora.co.uk> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171213124936.17914-1-daniel.vetter@ffwll.ch
2017-12-13 13:49:36 +01:00
drm: Pass the format info to .fb_create() Pass along the format information from the top to .fb_create() so that we can avoid redundant (and somewhat expensive) lookups in the drivers. Done with cocci (with some manual fixups): @@ identifier func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd) { ... ( - const struct drm_format_info *info = drm_get_format_info(...); | - const struct drm_format_info *info; ... - info = drm_get_format_info(...); ) <... - if (!info) - return ...; ...> } @@ identifier func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd) { ... } @find@ identifier fb_create_func =~ ".*create.*"; identifier dev, file, mode_cmd; @@ struct drm_framebuffer *fb_create_func( struct drm_device *dev, struct drm_file *file, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd); @@ identifier find.fb_create_func; expression dev, file, mode_cmd; @@ fb_create_func(dev, file + ,info ,mode_cmd) @@ expression dev, file, mode_cmd; @@ drm_gem_fb_create(dev, file + ,info ,mode_cmd) @@ expression dev, file, mode_cmd; @@ drm_gem_fb_create_with_dirty(dev, file + ,info ,mode_cmd) @@ expression dev, file_priv, mode_cmd; identifier info, fb; @@ info = drm_get_format_info(...); ... fb = dev->mode_config.funcs->fb_create(dev, file_priv + ,info ,mode_cmd); @@ identifier dev, file_priv, mode_cmd; @@ struct drm_mode_config_funcs { ... struct drm_framebuffer *(*fb_create)(struct drm_device *dev, struct drm_file *file_priv, + const struct drm_format_info *info, const struct drm_mode_fb_cmd2 *mode_cmd); ... }; v2: Fix kernel docs (Laurent) Fix commit msg (Geert) Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <lumag@kernel.org> Cc: Sean Paul <sean@poorly.run> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Lyude Paul <lyude@redhat.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Biju Das <biju.das.jz@bp.renesas.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: "Maíra Canal" <mcanal@igalia.com> Cc: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Chia-I Wu <olvaffe@gmail.com> Cc: Zack Rusin <zack.rusin@broadcom.com> Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: amd-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: virtualization@lists.linux.dev Cc: spice-devel@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-5-ville.syrjala@linux.intel.com
2025-07-01 12:07:07 +03:00
drm: locking&new iterators for connector_list The requirements for connector_list locking are a bit tricky: - We need to be able to jump over zombie conectors (i.e. with refcount == 0, but not yet removed from the list). If instead we require that there's no zombies on the list then the final kref_put must happen under the list protection lock, which means that locking context leaks all over the place. Not pretty - better to deal with zombies and wrap the locking just around the list_del in the destructor. - When we walk the list we must _not_ hold the connector list lock. We walk the connector list at an absolutely massive amounts of places, if all those places can't ever call drm_connector_unreference the code would get unecessarily complicated. - connector_list needs it own lock, again too many places that walk it that we could reuse e.g. mode_config.mutex without resulting in inversions. - Lots of code uses these loops to look-up a connector, i.e. they want to be able to call drm_connector_reference. But on the other hand we want connectors to stay on that list until they're dead (i.e. connector_list can't hold a full reference), which means despite the "can't hold lock for the loop body" rule we need to make sure a connector doesn't suddenly become a zombie. At first Dave&I discussed various horror-show approaches using srcu, but turns out it's fairly easy: - For the loop body we always hold an additional reference to the current connector. That means it can't zombify, and it also means it'll stay on the list, which means we can use it as our iterator to find the next connector. - When we try to find the next connector we only have to jump over zombies. To make sure we don't chase bad pointers that entire loop is protected with the new connect_list_lock spinlock. And because we know that we're starting out with a non-zombie (need to drop our reference for the old connector only after we have our new one), we're guranteed to still be on the connector_list and either find the next non-zombie or complete the iteration. - Only downside is that we need to make sure that the temporary reference for the loop body doesn't leak. iter_get/put() functions + lockdep make sure that's the case. - To avoid a flag day the new iterator macro has an _iter postfix. We can rename it back once all the users of the unsafe version are gone (there's about 100 list walkers for the connector_list). For now this patch only converts all the list walking in the core, leaving helpers and drivers for later patches. The nice thing is that we can now finally remove 2 FIXME comments from the register/unregister functions. v2: - use irqsafe spinlocks, so that we can use this in drm_state_dump too. - nuke drm_modeset_lock_all from drm_connector_init, now entirely cargo-culted nonsense. v3: - do {} while (!kref_get_unless_zero), makes for a tidier loop (Dave). - pretty kerneldoc - add EXPORT_SYMBOL, helpers&drivers are supposed to use this. v4: Change lockdep annotations to only check whether we release the iter fake lock again (i.e. make sure that iter_put is called), but not check any locking dependecies itself. That seams to require a recursive read lock in trylock mode. Cc: Dave Airlie <airlied@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-6-daniel.vetter@ffwll.ch
2016-12-14 00:08:06 +01:00
drm: rework delayed connector cleanup in connector_iter PROBE_DEFER also uses system_wq to reprobe drivers, which means when that again fails, and we try to flush the overall system_wq (to get all the delayed connectore cleanup work_struct completed), we deadlock. Fix this by using just a single cleanup work, so that we can only flush that one and don't block on anything else. That means a free list plus locking, a standard pattern. v2: - Correctly free connectors only on last ref. Oops (Chris). - use llist_head/node (Chris). v3 - Add init_llist_head (Chris). Fixes: a703c55004e1 ("drm: safely free connectors from connector_iter") Fixes: 613051dac40d ("drm: locking&new iterators for connector_list") Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Dave Airlie <airlied@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sean Paul <seanpaul@chromium.org> Cc: <stable@vger.kernel.org> # v4.11+: 613051dac40d ("drm: locking&new iterators for connector_list" Cc: <stable@vger.kernel.org> # v4.11+ Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: David Airlie <airlied@linux.ie> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Guillaume Tucker <guillaume.tucker@collabora.com> Cc: Mark Brown <broonie@kernel.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Matt Hart <matthew.hart@linaro.org> Cc: Thierry Escande <thierry.escande@collabora.co.uk> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171213124936.17914-1-daniel.vetter@ffwll.ch
2017-12-13 13:49:36 +01:00
drm: locking&new iterators for connector_list The requirements for connector_list locking are a bit tricky: - We need to be able to jump over zombie conectors (i.e. with refcount == 0, but not yet removed from the list). If instead we require that there's no zombies on the list then the final kref_put must happen under the list protection lock, which means that locking context leaks all over the place. Not pretty - better to deal with zombies and wrap the locking just around the list_del in the destructor. - When we walk the list we must _not_ hold the connector list lock. We walk the connector list at an absolutely massive amounts of places, if all those places can't ever call drm_connector_unreference the code would get unecessarily complicated. - connector_list needs it own lock, again too many places that walk it that we could reuse e.g. mode_config.mutex without resulting in inversions. - Lots of code uses these loops to look-up a connector, i.e. they want to be able to call drm_connector_reference. But on the other hand we want connectors to stay on that list until they're dead (i.e. connector_list can't hold a full reference), which means despite the "can't hold lock for the loop body" rule we need to make sure a connector doesn't suddenly become a zombie. At first Dave&I discussed various horror-show approaches using srcu, but turns out it's fairly easy: - For the loop body we always hold an additional reference to the current connector. That means it can't zombify, and it also means it'll stay on the list, which means we can use it as our iterator to find the next connector. - When we try to find the next connector we only have to jump over zombies. To make sure we don't chase bad pointers that entire loop is protected with the new connect_list_lock spinlock. And because we know that we're starting out with a non-zombie (need to drop our reference for the old connector only after we have our new one), we're guranteed to still be on the connector_list and either find the next non-zombie or complete the iteration. - Only downside is that we need to make sure that the temporary reference for the loop body doesn't leak. iter_get/put() functions + lockdep make sure that's the case. - To avoid a flag day the new iterator macro has an _iter postfix. We can rename it back once all the users of the unsafe version are gone (there's about 100 list walkers for the connector_list). For now this patch only converts all the list walking in the core, leaving helpers and drivers for later patches. The nice thing is that we can now finally remove 2 FIXME comments from the register/unregister functions. v2: - use irqsafe spinlocks, so that we can use this in drm_state_dump too. - nuke drm_modeset_lock_all from drm_connector_init, now entirely cargo-culted nonsense. v3: - do {} while (!kref_get_unless_zero), makes for a tidier loop (Dave). - pretty kerneldoc - add EXPORT_SYMBOL, helpers&drivers are supposed to use this. v4: Change lockdep annotations to only check whether we release the iter fake lock again (i.e. make sure that iter_put is called), but not check any locking dependecies itself. That seams to require a recursive read lock in trylock mode. Cc: Dave Airlie <airlied@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-6-daniel.vetter@ffwll.ch
2016-12-14 00:08:06 +01:00
drm: rework delayed connector cleanup in connector_iter PROBE_DEFER also uses system_wq to reprobe drivers, which means when that again fails, and we try to flush the overall system_wq (to get all the delayed connectore cleanup work_struct completed), we deadlock. Fix this by using just a single cleanup work, so that we can only flush that one and don't block on anything else. That means a free list plus locking, a standard pattern. v2: - Correctly free connectors only on last ref. Oops (Chris). - use llist_head/node (Chris). v3 - Add init_llist_head (Chris). Fixes: a703c55004e1 ("drm: safely free connectors from connector_iter") Fixes: 613051dac40d ("drm: locking&new iterators for connector_list") Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Dave Airlie <airlied@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sean Paul <seanpaul@chromium.org> Cc: <stable@vger.kernel.org> # v4.11+: 613051dac40d ("drm: locking&new iterators for connector_list" Cc: <stable@vger.kernel.org> # v4.11+ Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: David Airlie <airlied@linux.ie> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Guillaume Tucker <guillaume.tucker@collabora.com> Cc: Mark Brown <broonie@kernel.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Matt Hart <matthew.hart@linaro.org> Cc: Thierry Escande <thierry.escande@collabora.co.uk> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171213124936.17914-1-daniel.vetter@ffwll.ch
2017-12-13 13:49:36 +01:00
drm/panic: Add drm panic locking Rough sketch for the locking of drm panic printing code. The upshot of this approach is that we can pretty much entirely rely on the atomic commit flow, with the pair of raw_spin_lock/unlock providing any barriers we need, without having to create really big critical sections in code. This also avoids the need that drivers must explicitly update the panic handler state, which they might forget to do, or not do consistently, and then we blow up in the worst possible times. It is somewhat racy against a concurrent atomic update, and we might write into a buffer which the hardware will never display. But there's fundamentally no way to avoid that - if we do the panic state update explicitly after writing to the hardware, we might instead write to an old buffer that the user will barely ever see. Note that an rcu protected deference of plane->state would give us the the same guarantees, but it has the downside that we then need to protect the plane state freeing functions with call_rcu too. Which would very widely impact a lot of code and therefore doesn't seem worth the complexity compared to a raw spinlock with very tiny critical sections. Plus rcu cannot be used to protect access to peek/poke registers anyway, so we'd still need it for those cases. Peek/poke registers for vram access (or a gart pte reserved just for panic code) are also the reason I've gone with a per-device and not per-plane spinlock, since usually these things are global for the entire display. Going with per-plane locks would mean drivers for such hardware would need additional locks, which we don't want, since it deviates from the per-console takeoverlocks design. Longer term it might be useful if the panic notifiers grow a bit more structure than just the absolute bare EXPORT_SYMBOL(panic_notifier_list) - somewhat aside, why is that not EXPORT_SYMBOL_GPL ... If panic notifiers would be more like console drivers with proper register/unregister interfaces we could perhaps reuse the very fancy console lock with all it's check and takeover semantics that John Ogness is developing to fix the console_lock mess. But for the initial cut of a drm panic printing support I don't think we need that, because the critical sections are extremely small and only happen once per display refresh. So generally just 60 tiny locked sections per second, which is nothing compared to a serial console running a 115kbaud doing really slow mmio writes for each byte. So for now the raw spintrylock in drm panic notifier callback should be good enough. Another benefit of making panic notifiers more like full blown consoles (that are used in panics only) would be that we get the two stage design, where first all the safe outputs are used. And then the dangerous takeover tricks are deployed (where for display drivers we also might try to intercept any in-flight display buffer flips, which if we race and misprogram fifos and watermarks can hang the memory controller on some hw). For context the actual implementation on the drm side is by Jocelyn and this patch is meant to be combined with the overall approach in v7 (v8 is a bit less flexible, which I think is the wrong direction): https://lore.kernel.org/dri-devel/20240104160301.185915-1-jfalempe@redhat.com/ Note that the locking is very much not correct there, hence this separate rfc. Starting from v10, I (Jocelyn) have included this patch in the drm_panic series, and done the corresponding changes. v2: - fix authorship, this was all my typing - some typo oopsies - link to the drm panic work by Jocelyn for context v10: - Use spinlock_irqsave/restore (John Ogness) v11: - Use macro instead of inline functions for drm_panic_lock/unlock (John Ogness) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: John Ogness <john.ogness@linutronix.de> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-2-jfalempe@redhat.com Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-04-09 18:30:40 +02:00
drm: Add a new connector atomic property for link status At the time userspace does setcrtc, we've already promised the mode would work. The promise is based on the theoretical capabilities of the link, but it's possible we can't reach this in practice. The DP spec describes how the link should be reduced, but we can't reduce the link below the requirements of the mode. Black screen follows. One idea would be to have setcrtc return a failure. However, it already should not fail as the atomic checks have passed. It would also conflict with the idea of making setcrtc asynchronous in the future, returning before the actual mode setting and link training. Another idea is to train the link "upfront" at hotplug time, before pruning the mode list, so that we can do the pruning based on practical not theoretical capabilities. However, the changes for link training are pretty drastic, all for the sake of error handling and DP compliance, when the most common happy day scenario is the current approach of link training at mode setting time, using the optimal parameters for the mode. It is also not certain all hardware could do this without the pipe on; not even all our hardware can do this. Some of this can be solved, but not trivially. Both of the above ideas also fail to address link degradation *during* operation. The solution is to add a new "link-status" connector property in order to address link training failure in a way that: a) changes the current happy day scenario as little as possible, to avoid regressions, b) can be implemented the same way by all drm drivers, c) is still opt-in for the drivers and userspace, and opting out doesn't regress the user experience, d) doesn't prevent drivers from implementing better or alternate approaches, possibly without userspace involvement. And, of course, handles all the issues presented. In the usual happy day scenario, this is always "good". If something fails during or after a mode set, the kernel driver can set the link status to "bad" and issue a hotplug uevent for userspace to have it re-check the valid modes through GET_CONNECTOR IOCTL, and try modeset again. If the theoretical capabilities of the link can't be reached, the mode list is trimmed based on that. v7 by Jani: * Rebase, simplify set property while at it, checkpatch fix v6: * Fix a typo in kernel doc (Sean Paul) v5: * Clarify doc for silent rejection of atomic properties by driver (Daniel Vetter) v4: * Add comments in kernel-doc format (Daniel Vetter) * Update the kernel-doc for link-status (Sean Paul) v3: * Fixed a build error (Jani Saarinen) v2: * Removed connector->link_status (Daniel Vetter) * Set connector->state->link_status in drm_mode_connector_set_link_status_property (Daniel Vetter) * Set the connector_changed flag to true if connector->state->link_status changed. * Reset link_status to GOOD in update_output_state (Daniel Vetter) * Never allow userspace to set link status from Good To Bad (Daniel Vetter) Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Tony Cheng <tony.cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Eric Anholt <eric@anholt.net> (for the -modesetting patch) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/0182487051aa9f1594820e35a4853de2f8747b4e.1481883920.git.jani.nikula@intel.com
2016-12-16 12:29:06 +02:00
drm/fence: add in-fences support There is now a new property called IN_FENCE_FD attached to every plane state that receives sync_file fds from userspace via the atomic commit IOCTL. The fd is then translated to a fence (that may be a fence_array subclass or just a normal fence) and then used by DRM to fence_wait() for all fences in the sync_file to signal. So it only commits when all framebuffers are ready to scanout. v2: Comments by Daniel Vetter: - remove set state->fence = NULL in destroy phase - accept fence -1 as valid and just return 0 - do not call fence_get() - sync_file_fences_get() already calls it - fence_put() if state->fence is already set, in case userspace set the property more than once. v3: WARN_ON if fence is set but state has no FB v4: Comment from Maarten Lankhorst - allow set fence with no related fb v5: rename FENCE_FD to IN_FENCE_FD v6: Comments by Daniel Vetter: - rename plane_state->in_fence back to "fence" - re-introduce WARN_ON if fence set but no fb - rebase after fence -> dma_fence rename v7: Comments by Brian Starkey - set state->fence to NULL when duplicating the state - fail if IN_FENCE_FD was already set v8: rebase against latest drm-misc Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Robert Foss <robert.foss@collabora.com> [danvet: Rebase onto extracted drm_mode_config.[hc].] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-11-15 22:06:39 +09:00
drm/fence: add out-fences support Support DRM out-fences by creating a sync_file with a fence for each CRTC that sets the OUT_FENCE_PTR property. We use the out_fence pointer received in the OUT_FENCE_PTR prop to send the sync_file fd back to userspace. The sync_file and fd are allocated/created before commit, but the fd_install operation only happens after we know that commit succeed. v2: Comment by Rob Clark: - Squash commit that adds DRM_MODE_ATOMIC_OUT_FENCE flag here. Comment by Daniel Vetter: - Add clean up code for out_fences v3: Comments by Daniel Vetter: - create DRM_MODE_ATOMIC_EVENT_MASK - userspace should fill out_fences_ptr with the crtc_ids for which it wants fences back. v4: Create OUT_FENCE_PTR properties and remove old approach. v5: Comments by Brian Starkey: - Remove extra fence_get() in atomic_ioctl() - Check ret before iterating on the crtc_state - check ret before fd_install - set fence_state to NULL at the beginning - check fence_state->out_fence_ptr before put_user() - change order of fput() and put_unused_fd() on failure - Add access_ok() check to the out_fence_ptr received - Rebase after fence -> dma_fence rename - Store out_fence_ptr in the drm_atomic_state - Split crtc_setup_out_fence() - return -1 as out_fence with TEST_ONLY flag v6: Comments by Daniel Vetter - Add prepare/unprepare_crtc_signaling() - move struct drm_out_fence_state to drm_atomic.c - mark get_crtc_fence() as static Comments by Brian Starkey - proper set fence_ptr fence_state array - isolate fence_idx increment - improve error handling v7: Comments by Daniel Vetter - remove prefix from internal functions - make out_fence_ptr an s64 pointer - degrade DRM_INFO to DRM_DEBUG_ATOMIC when put_user fail - fix doc issues - filter out OUT_FENCE_PTR == NULL and do not fail in this case - add complete_crtc_signalling() - krealloc fence_state on demand Comment by Brian Starkey - remove unused crtc_state arg from get_out_fence() v8: Comment by Brian Starkey - cancel events before check for !fence_state - convert a few lefovers u64 types for out_fence_ptr - fix memleak by assign fence_state earlier after realloc - proper accout num_fences in case of error v9: Comment by Brian Starkey - memset last position of fence_state after krealloc Comments by Sean Paul - pass install_fds in complete_crtc_signaling() instead of ret - put_user(-1, fence_ptr) when decoding props v10: Comment by Brian Starkey - remove unneeded num_fences increment on error path - kfree fence_state after installing fences fd v11: rebase against latest drm-misc v12: rebase again against latest drm-misc Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Brian Starkey <brian.starkey@arm.com> (v10) Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Robert Foss <robert.foss@collabora.com> (v10) [danvet: Appease checkpatch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479301221-13056-1-git-send-email-gustavo@padovan.org
2016-11-16 22:00:21 +09:00
drm/fence: add out-fences support Support DRM out-fences by creating a sync_file with a fence for each CRTC that sets the OUT_FENCE_PTR property. We use the out_fence pointer received in the OUT_FENCE_PTR prop to send the sync_file fd back to userspace. The sync_file and fd are allocated/created before commit, but the fd_install operation only happens after we know that commit succeed. v2: Comment by Rob Clark: - Squash commit that adds DRM_MODE_ATOMIC_OUT_FENCE flag here. Comment by Daniel Vetter: - Add clean up code for out_fences v3: Comments by Daniel Vetter: - create DRM_MODE_ATOMIC_EVENT_MASK - userspace should fill out_fences_ptr with the crtc_ids for which it wants fences back. v4: Create OUT_FENCE_PTR properties and remove old approach. v5: Comments by Brian Starkey: - Remove extra fence_get() in atomic_ioctl() - Check ret before iterating on the crtc_state - check ret before fd_install - set fence_state to NULL at the beginning - check fence_state->out_fence_ptr before put_user() - change order of fput() and put_unused_fd() on failure - Add access_ok() check to the out_fence_ptr received - Rebase after fence -> dma_fence rename - Store out_fence_ptr in the drm_atomic_state - Split crtc_setup_out_fence() - return -1 as out_fence with TEST_ONLY flag v6: Comments by Daniel Vetter - Add prepare/unprepare_crtc_signaling() - move struct drm_out_fence_state to drm_atomic.c - mark get_crtc_fence() as static Comments by Brian Starkey - proper set fence_ptr fence_state array - isolate fence_idx increment - improve error handling v7: Comments by Daniel Vetter - remove prefix from internal functions - make out_fence_ptr an s64 pointer - degrade DRM_INFO to DRM_DEBUG_ATOMIC when put_user fail - fix doc issues - filter out OUT_FENCE_PTR == NULL and do not fail in this case - add complete_crtc_signalling() - krealloc fence_state on demand Comment by Brian Starkey - remove unused crtc_state arg from get_out_fence() v8: Comment by Brian Starkey - cancel events before check for !fence_state - convert a few lefovers u64 types for out_fence_ptr - fix memleak by assign fence_state earlier after realloc - proper accout num_fences in case of error v9: Comment by Brian Starkey - memset last position of fence_state after krealloc Comments by Sean Paul - pass install_fds in complete_crtc_signaling() instead of ret - put_user(-1, fence_ptr) when decoding props v10: Comment by Brian Starkey - remove unneeded num_fences increment on error path - kfree fence_state after installing fences fd v11: rebase against latest drm-misc v12: rebase again against latest drm-misc Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Brian Starkey <brian.starkey@arm.com> (v10) Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Robert Foss <robert.foss@collabora.com> (v10) [danvet: Appease checkpatch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479301221-13056-1-git-send-email-gustavo@padovan.org
2016-11-16 22:00:21 +09:00
drm: report dp downstream port type as a subconnector property Currently, downstream port type is only reported in debugfs. This information should be considered important since it reflects the actual physical connector type. Some userspace (e.g. window compositors) may want to show this info to a user. The 'subconnector' property is already utilized for DVI-I and TV-out for reporting connector subtype. The initial motivation for this feature came from i2c test [1]. It is supposed to be skipped on VGA connectors, but it cannot detect VGA over DP and fails instead. v2: - Ville: utilized drm_dp_is_branch() - Ville: implement DP 1.0 downstream type info - Replaced create_dp_properties with add_dp_subconnector_property - Added dp_set_subconnector_property helper v4: - Ville: add DP1.0 best assumption about subconnector - Ville: assume DVI is DVI-D - Ville: reuse Writeback enum value for Virtual subconnector - Renamed #defines: HDMI -> HDMIA, DP -> DisplayPort v5: rebase v6: - Jani Nikula: renamed a function name - Jani Nikula: addressed the issues with documentation [1]: https://bugs.freedesktop.org/show_bug.cgi?id=104097 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by: Jeevan B <jeevan.b@intel.com> Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1587732655-17544-1-git-send-email-jeevan.b@intel.com
2020-04-24 18:20:51 +05:30
drm: content-type property for HDMI connector Added content_type property to drm_connector_state in order to properly handle external HDMI TV content-type setting. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-2-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-05-15 16:59:27 +03:00
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-29 17:42:32 +01:00
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-29 17:42:32 +01:00
drm: Fix docbook warnings in hdr metadata helper structures Fixes the following warnings: ./include/drm/drm_mode_config.h:841: warning: Incorrect use of kernel-doc format: * hdr_output_metadata_property: Connector property containing hdr ./include/drm/drm_mode_config.h:918: warning: Function parameter or member 'hdr_output_metadata_property' not described in 'drm_mode_config' ./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_output_metadata' not described in 'drm_connector' ./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_sink_metadata' not described in 'drm_connector' Also adds some property documentation for HDR Metadata Connector Property in connector property create function. v2: Fixed Sean Paul's review comments. v3: Fixed Daniel Vetter's review comments, added the UAPI structure definition section in kernel docs. v4: Fixed Daniel Vetter's review comments. v5: Added structure member references as per Daniel's suggestion. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: "Ville Syrjä" <ville.syrjala@linux.intel.com> Cc: Hans Verkuil <hansverk@cisco.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Reviewed-by: Sean Paul <sean@poorly.run> (v1) Signed-off-by: Uma Shankar <uma.shankar@intel.com> [danvet: Fix up markup: () for functions, & for structs. Style guide also recommends to prepend struct for structures.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1559647022-7336-1-git-send-email-uma.shankar@intel.com
2019-06-04 16:47:02 +05:30
drm: Add Content protection type property This patch adds a DRM ENUM property to the selected connectors. This property is used for mentioning the protected content's type from userspace to kernel HDCP authentication. Type of the stream is decided by the protected content providers. Type 0 content can be rendered on any HDCP protected display wires. But Type 1 content can be rendered only on HDCP2.2 protected paths. So when a userspace sets this property to Type 1 and starts the HDCP enable, kernel will honour it only if HDCP2.2 authentication is through for type 1. Else HDCP enable will be failed. Pekka have completed the Weston DRM-backend review in https://gitlab.freedesktop.org/wayland/weston/merge_requests/48 and the UAPI for HDCP 2.2 looks good. The userspace is accepted in Weston. v2: cp_content_type is replaced with content_protection_type [daniel] check at atomic_set_property is removed [Maarten] v3: %s/content_protection_type/hdcp_content_type [Pekka] v4: property is created for the first requested connector and then reused. [Danvet] v5: kernel doc nits addressed [Daniel] Rebased as part of patch reordering. v6: Kernel docs are modified [pekka] v7: More details in Kernel docs. [pekka] v8: Few more clarification into kernel doc of content type [pekka] v9: Small fixes in coding style. v10: Moving DRM_MODE_HDCP_CONTENT_TYPEx definition to drm_hdcp.h [pekka] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/320957/?series=57232&rev=14
2019-08-01 17:11:14 +05:30
drm: Introduce plane SIZE_HINTS property Add a new immutable plane property by which a plane can advertise a handful of recommended plane sizes. This would be mostly exposed by cursor planes as a slightly more capable replacement for the DRM_CAP_CURSOR_WIDTH/HEIGHT caps, which can only declare a one size fits all limit for the whole device. Currently eg. amdgpu/i915/nouveau just advertize the max cursor size via the cursor size caps. But always using the max sized cursor can waste a surprising amount of power, so a better strategy is desirable. Most other drivers don't specify any cursor size at all, in which case the ioctl code just claims that 64x64 is a great choice. Whether that is actually true is debatable. A poll of various compositor developers informs us that blindly probing with setcursor/atomic ioctl to determine suitable cursor sizes is not acceptable, thus the introduction of the new property to supplant the cursor size caps. The compositor will now be free to select a more optimal cursor size from the short list of options. Note that the reported sizes (either via the property or the caps) make no claims about things such as plane scaling. So these things should only really be consulted for simple "cursor like" use cases. Userspace consumer in the form of mutter seems ready: https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3165 v2: Try to add some docs v3: Specify that value 0 is reserved for future use (basic idea from Jonas) Drop the note about typical hardware (Pekka) v4: Update the docs to indicate the list is "in order of preference" Add a a link to the mutter MR v5: Limit to cursors only for now (Simon) Cc: Jonas Ådahl <jadahl@redhat.com> Cc: Sameer Lattannavar <sameer.lattannavar@intel.com> Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com> Reviewed-by: Simon Ser <contact@emersion.fr> Acked-by: Daniel Stone <daniels@collabora.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240318204408.9687-2-ville.syrjala@linux.intel.com
2024-03-18 22:44:07 +02:00
drm: Introduce plane SIZE_HINTS property Add a new immutable plane property by which a plane can advertise a handful of recommended plane sizes. This would be mostly exposed by cursor planes as a slightly more capable replacement for the DRM_CAP_CURSOR_WIDTH/HEIGHT caps, which can only declare a one size fits all limit for the whole device. Currently eg. amdgpu/i915/nouveau just advertize the max cursor size via the cursor size caps. But always using the max sized cursor can waste a surprising amount of power, so a better strategy is desirable. Most other drivers don't specify any cursor size at all, in which case the ioctl code just claims that 64x64 is a great choice. Whether that is actually true is debatable. A poll of various compositor developers informs us that blindly probing with setcursor/atomic ioctl to determine suitable cursor sizes is not acceptable, thus the introduction of the new property to supplant the cursor size caps. The compositor will now be free to select a more optimal cursor size from the short list of options. Note that the reported sizes (either via the property or the caps) make no claims about things such as plane scaling. So these things should only really be consulted for simple "cursor like" use cases. Userspace consumer in the form of mutter seems ready: https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3165 v2: Try to add some docs v3: Specify that value 0 is reserved for future use (basic idea from Jonas) Drop the note about typical hardware (Pekka) v4: Update the docs to indicate the list is "in order of preference" Add a a link to the mutter MR v5: Limit to cursors only for now (Simon) Cc: Jonas Ådahl <jadahl@redhat.com> Cc: Sameer Lattannavar <sameer.lattannavar@intel.com> Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com> Reviewed-by: Simon Ser <contact@emersion.fr> Acked-by: Daniel Stone <daniels@collabora.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240318204408.9687-2-ville.syrjala@linux.intel.com
2024-03-18 22:44:07 +02:00
drm: Manage drm_mode_config_init with drmm_ drm_mode_config_cleanup is idempotent, so no harm in calling this twice. This allows us to gradually switch drivers over by removing explicit drm_mode_config_cleanup calls. With this step it's now also possible that (at least for simple drivers) automatic resource cleanup can be done correctly without a drm_driver->release hook. Therefore allow this now in devm_drm_dev_init(). Also with drmm_ explicit drm_driver->release hooks are kinda not the best option: Drivers can always just register their current release hook with drmm_add_action, but even better they could split them up to simplify the unwinding for the driver load failure case. So deprecate that hook to discourage future users. v2: Fixup the example in the kerneldoc too. v3: - For paranoia, double check that minor->dev == dev in the release hook, because I botched the pointer math in the drmm library. - Call drm_mode_config_cleanup when drmm_add_action fails, we'd be missing some mutex_destroy and ida_cleanup otherwise (Laurent) v4: Add a drmm_add_action_or_reset (like devm_ has) to encapsulate this pattern (Noralf). v5: Fix oversight in the new drmm_add_action_or_reset macro (Noralf) v4: Review from Sam: - drmm_mode_config_init wrapper (also suggested by Thomas) - improve commit message, explain better why ->relase is deprecated v5: - Make drmm_ the main function, with the old one as compat wrapper (Sam) - Add FIXME comments to drm_mode_config_cleanup/init() that drivers shouldn't use these anymore. - Move drmm_add_action_or_reset helper to an earlier patch. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-27-daniel.vetter@ffwll.ch
2020-03-23 15:49:25 +01:00