linux/include/uapi/drm/omap_drm.h

126 lines
3.9 KiB

License cleanup: add SPDX license identifier to uapi header files with a license Many user space API headers have licensing information, which is either incomplete, badly formatted or just a shorthand for referring to the license under which the file is supposed to be. This makes it hard for compliance tools to determine the correct license. Update these files with an SPDX license identifier. The identifier was chosen based on the license information in the file. GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license identifier with the added 'WITH Linux-syscall-note' exception, which is the officially assigned exception identifier for the kernel syscall exception: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". This exception makes it possible to include GPL headers into non GPL code, without confusing license compliance tools. Headers which have either explicit dual licensing or are just licensed under a non GPL license are updated with the corresponding SPDX identifier and the GPLv2 with syscall exception identifier. The format is: ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE) SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. The update does not remove existing license information as this has to be done on a case by case basis and the copyright holders might have to be consulted. This will happen in a separate step. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:09:13 +01:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
uapi: fix drm/omap_drm.h userspace compilation errors Consistently use types from linux/types.h like in other uapi drm/*_drm.h header files to fix the following drm/omap_drm.h userspace compilation errors: /usr/include/drm/omap_drm.h:36:2: error: unknown type name 'uint64_t' uint64_t param; /* in */ /usr/include/drm/omap_drm.h:37:2: error: unknown type name 'uint64_t' uint64_t value; /* in (set_param), out (get_param) */ /usr/include/drm/omap_drm.h:56:2: error: unknown type name 'uint32_t' uint32_t bytes; /* (for non-tiled formats) */ /usr/include/drm/omap_drm.h:58:3: error: unknown type name 'uint16_t' uint16_t width; /usr/include/drm/omap_drm.h:59:3: error: unknown type name 'uint16_t' uint16_t height; /usr/include/drm/omap_drm.h:65:2: error: unknown type name 'uint32_t' uint32_t flags; /* in */ /usr/include/drm/omap_drm.h:66:2: error: unknown type name 'uint32_t' uint32_t handle; /* out */ /usr/include/drm/omap_drm.h:67:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:77:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:78:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:82:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:83:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:88:2: error: unknown type name 'uint32_t' uint32_t nregions; /usr/include/drm/omap_drm.h:89:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:93:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:94:2: error: unknown type name 'uint32_t' uint32_t pad; /usr/include/drm/omap_drm.h:95:2: error: unknown type name 'uint64_t' uint64_t offset; /* mmap offset (out) */ /usr/include/drm/omap_drm.h:102:2: error: unknown type name 'uint32_t' uint32_t size; /* virtual size for mmap'ing (out) */ /usr/include/drm/omap_drm.h:103:2: error: unknown type name 'uint32_t' uint32_t __pad; Fixes: ef6503e89194 ("drm: Kbuild: add omap_drm.h to the installed headers") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-02-25 16:29:50 +03:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
uapi: fix drm/omap_drm.h userspace compilation errors Consistently use types from linux/types.h like in other uapi drm/*_drm.h header files to fix the following drm/omap_drm.h userspace compilation errors: /usr/include/drm/omap_drm.h:36:2: error: unknown type name 'uint64_t' uint64_t param; /* in */ /usr/include/drm/omap_drm.h:37:2: error: unknown type name 'uint64_t' uint64_t value; /* in (set_param), out (get_param) */ /usr/include/drm/omap_drm.h:56:2: error: unknown type name 'uint32_t' uint32_t bytes; /* (for non-tiled formats) */ /usr/include/drm/omap_drm.h:58:3: error: unknown type name 'uint16_t' uint16_t width; /usr/include/drm/omap_drm.h:59:3: error: unknown type name 'uint16_t' uint16_t height; /usr/include/drm/omap_drm.h:65:2: error: unknown type name 'uint32_t' uint32_t flags; /* in */ /usr/include/drm/omap_drm.h:66:2: error: unknown type name 'uint32_t' uint32_t handle; /* out */ /usr/include/drm/omap_drm.h:67:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:77:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:78:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:82:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:83:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:88:2: error: unknown type name 'uint32_t' uint32_t nregions; /usr/include/drm/omap_drm.h:89:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:93:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:94:2: error: unknown type name 'uint32_t' uint32_t pad; /usr/include/drm/omap_drm.h:95:2: error: unknown type name 'uint64_t' uint64_t offset; /* mmap offset (out) */ /usr/include/drm/omap_drm.h:102:2: error: unknown type name 'uint32_t' uint32_t size; /* virtual size for mmap'ing (out) */ /usr/include/drm/omap_drm.h:103:2: error: unknown type name 'uint32_t' uint32_t __pad; Fixes: ef6503e89194 ("drm: Kbuild: add omap_drm.h to the installed headers") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-02-25 16:29:50 +03:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
uapi: fix drm/omap_drm.h userspace compilation errors Consistently use types from linux/types.h like in other uapi drm/*_drm.h header files to fix the following drm/omap_drm.h userspace compilation errors: /usr/include/drm/omap_drm.h:36:2: error: unknown type name 'uint64_t' uint64_t param; /* in */ /usr/include/drm/omap_drm.h:37:2: error: unknown type name 'uint64_t' uint64_t value; /* in (set_param), out (get_param) */ /usr/include/drm/omap_drm.h:56:2: error: unknown type name 'uint32_t' uint32_t bytes; /* (for non-tiled formats) */ /usr/include/drm/omap_drm.h:58:3: error: unknown type name 'uint16_t' uint16_t width; /usr/include/drm/omap_drm.h:59:3: error: unknown type name 'uint16_t' uint16_t height; /usr/include/drm/omap_drm.h:65:2: error: unknown type name 'uint32_t' uint32_t flags; /* in */ /usr/include/drm/omap_drm.h:66:2: error: unknown type name 'uint32_t' uint32_t handle; /* out */ /usr/include/drm/omap_drm.h:67:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:77:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:78:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:82:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:83:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:88:2: error: unknown type name 'uint32_t' uint32_t nregions; /usr/include/drm/omap_drm.h:89:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:93:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:94:2: error: unknown type name 'uint32_t' uint32_t pad; /usr/include/drm/omap_drm.h:95:2: error: unknown type name 'uint64_t' uint64_t offset; /* mmap offset (out) */ /usr/include/drm/omap_drm.h:102:2: error: unknown type name 'uint32_t' uint32_t size; /* virtual size for mmap'ing (out) */ /usr/include/drm/omap_drm.h:103:2: error: unknown type name 'uint32_t' uint32_t __pad; Fixes: ef6503e89194 ("drm: Kbuild: add omap_drm.h to the installed headers") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-02-25 16:29:50 +03:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
uapi: fix drm/omap_drm.h userspace compilation errors Consistently use types from linux/types.h like in other uapi drm/*_drm.h header files to fix the following drm/omap_drm.h userspace compilation errors: /usr/include/drm/omap_drm.h:36:2: error: unknown type name 'uint64_t' uint64_t param; /* in */ /usr/include/drm/omap_drm.h:37:2: error: unknown type name 'uint64_t' uint64_t value; /* in (set_param), out (get_param) */ /usr/include/drm/omap_drm.h:56:2: error: unknown type name 'uint32_t' uint32_t bytes; /* (for non-tiled formats) */ /usr/include/drm/omap_drm.h:58:3: error: unknown type name 'uint16_t' uint16_t width; /usr/include/drm/omap_drm.h:59:3: error: unknown type name 'uint16_t' uint16_t height; /usr/include/drm/omap_drm.h:65:2: error: unknown type name 'uint32_t' uint32_t flags; /* in */ /usr/include/drm/omap_drm.h:66:2: error: unknown type name 'uint32_t' uint32_t handle; /* out */ /usr/include/drm/omap_drm.h:67:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:77:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:78:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:82:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:83:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:88:2: error: unknown type name 'uint32_t' uint32_t nregions; /usr/include/drm/omap_drm.h:89:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:93:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:94:2: error: unknown type name 'uint32_t' uint32_t pad; /usr/include/drm/omap_drm.h:95:2: error: unknown type name 'uint64_t' uint64_t offset; /* mmap offset (out) */ /usr/include/drm/omap_drm.h:102:2: error: unknown type name 'uint32_t' uint32_t size; /* virtual size for mmap'ing (out) */ /usr/include/drm/omap_drm.h:103:2: error: unknown type name 'uint32_t' uint32_t __pad; Fixes: ef6503e89194 ("drm: Kbuild: add omap_drm.h to the installed headers") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-02-25 16:29:50 +03:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
uapi: fix drm/omap_drm.h userspace compilation errors Consistently use types from linux/types.h like in other uapi drm/*_drm.h header files to fix the following drm/omap_drm.h userspace compilation errors: /usr/include/drm/omap_drm.h:36:2: error: unknown type name 'uint64_t' uint64_t param; /* in */ /usr/include/drm/omap_drm.h:37:2: error: unknown type name 'uint64_t' uint64_t value; /* in (set_param), out (get_param) */ /usr/include/drm/omap_drm.h:56:2: error: unknown type name 'uint32_t' uint32_t bytes; /* (for non-tiled formats) */ /usr/include/drm/omap_drm.h:58:3: error: unknown type name 'uint16_t' uint16_t width; /usr/include/drm/omap_drm.h:59:3: error: unknown type name 'uint16_t' uint16_t height; /usr/include/drm/omap_drm.h:65:2: error: unknown type name 'uint32_t' uint32_t flags; /* in */ /usr/include/drm/omap_drm.h:66:2: error: unknown type name 'uint32_t' uint32_t handle; /* out */ /usr/include/drm/omap_drm.h:67:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:77:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:78:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:82:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:83:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:88:2: error: unknown type name 'uint32_t' uint32_t nregions; /usr/include/drm/omap_drm.h:89:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:93:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:94:2: error: unknown type name 'uint32_t' uint32_t pad; /usr/include/drm/omap_drm.h:95:2: error: unknown type name 'uint64_t' uint64_t offset; /* mmap offset (out) */ /usr/include/drm/omap_drm.h:102:2: error: unknown type name 'uint32_t' uint32_t size; /* virtual size for mmap'ing (out) */ /usr/include/drm/omap_drm.h:103:2: error: unknown type name 'uint32_t' uint32_t __pad; Fixes: ef6503e89194 ("drm: Kbuild: add omap_drm.h to the installed headers") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-02-25 16:29:50 +03:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
uapi: fix drm/omap_drm.h userspace compilation errors Consistently use types from linux/types.h like in other uapi drm/*_drm.h header files to fix the following drm/omap_drm.h userspace compilation errors: /usr/include/drm/omap_drm.h:36:2: error: unknown type name 'uint64_t' uint64_t param; /* in */ /usr/include/drm/omap_drm.h:37:2: error: unknown type name 'uint64_t' uint64_t value; /* in (set_param), out (get_param) */ /usr/include/drm/omap_drm.h:56:2: error: unknown type name 'uint32_t' uint32_t bytes; /* (for non-tiled formats) */ /usr/include/drm/omap_drm.h:58:3: error: unknown type name 'uint16_t' uint16_t width; /usr/include/drm/omap_drm.h:59:3: error: unknown type name 'uint16_t' uint16_t height; /usr/include/drm/omap_drm.h:65:2: error: unknown type name 'uint32_t' uint32_t flags; /* in */ /usr/include/drm/omap_drm.h:66:2: error: unknown type name 'uint32_t' uint32_t handle; /* out */ /usr/include/drm/omap_drm.h:67:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:77:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:78:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:82:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:83:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:88:2: error: unknown type name 'uint32_t' uint32_t nregions; /usr/include/drm/omap_drm.h:89:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:93:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:94:2: error: unknown type name 'uint32_t' uint32_t pad; /usr/include/drm/omap_drm.h:95:2: error: unknown type name 'uint64_t' uint64_t offset; /* mmap offset (out) */ /usr/include/drm/omap_drm.h:102:2: error: unknown type name 'uint32_t' uint32_t size; /* virtual size for mmap'ing (out) */ /usr/include/drm/omap_drm.h:103:2: error: unknown type name 'uint32_t' uint32_t __pad; Fixes: ef6503e89194 ("drm: Kbuild: add omap_drm.h to the installed headers") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-02-25 16:29:50 +03:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
uapi: fix drm/omap_drm.h userspace compilation errors Consistently use types from linux/types.h like in other uapi drm/*_drm.h header files to fix the following drm/omap_drm.h userspace compilation errors: /usr/include/drm/omap_drm.h:36:2: error: unknown type name 'uint64_t' uint64_t param; /* in */ /usr/include/drm/omap_drm.h:37:2: error: unknown type name 'uint64_t' uint64_t value; /* in (set_param), out (get_param) */ /usr/include/drm/omap_drm.h:56:2: error: unknown type name 'uint32_t' uint32_t bytes; /* (for non-tiled formats) */ /usr/include/drm/omap_drm.h:58:3: error: unknown type name 'uint16_t' uint16_t width; /usr/include/drm/omap_drm.h:59:3: error: unknown type name 'uint16_t' uint16_t height; /usr/include/drm/omap_drm.h:65:2: error: unknown type name 'uint32_t' uint32_t flags; /* in */ /usr/include/drm/omap_drm.h:66:2: error: unknown type name 'uint32_t' uint32_t handle; /* out */ /usr/include/drm/omap_drm.h:67:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:77:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:78:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:82:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:83:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:88:2: error: unknown type name 'uint32_t' uint32_t nregions; /usr/include/drm/omap_drm.h:89:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:93:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:94:2: error: unknown type name 'uint32_t' uint32_t pad; /usr/include/drm/omap_drm.h:95:2: error: unknown type name 'uint64_t' uint64_t offset; /* mmap offset (out) */ /usr/include/drm/omap_drm.h:102:2: error: unknown type name 'uint32_t' uint32_t size; /* virtual size for mmap'ing (out) */ /usr/include/drm/omap_drm.h:103:2: error: unknown type name 'uint32_t' uint32_t __pad; Fixes: ef6503e89194 ("drm: Kbuild: add omap_drm.h to the installed headers") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-02-25 16:29:50 +03:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
uapi: fix drm/omap_drm.h userspace compilation errors Consistently use types from linux/types.h like in other uapi drm/*_drm.h header files to fix the following drm/omap_drm.h userspace compilation errors: /usr/include/drm/omap_drm.h:36:2: error: unknown type name 'uint64_t' uint64_t param; /* in */ /usr/include/drm/omap_drm.h:37:2: error: unknown type name 'uint64_t' uint64_t value; /* in (set_param), out (get_param) */ /usr/include/drm/omap_drm.h:56:2: error: unknown type name 'uint32_t' uint32_t bytes; /* (for non-tiled formats) */ /usr/include/drm/omap_drm.h:58:3: error: unknown type name 'uint16_t' uint16_t width; /usr/include/drm/omap_drm.h:59:3: error: unknown type name 'uint16_t' uint16_t height; /usr/include/drm/omap_drm.h:65:2: error: unknown type name 'uint32_t' uint32_t flags; /* in */ /usr/include/drm/omap_drm.h:66:2: error: unknown type name 'uint32_t' uint32_t handle; /* out */ /usr/include/drm/omap_drm.h:67:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:77:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:78:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:82:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:83:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:88:2: error: unknown type name 'uint32_t' uint32_t nregions; /usr/include/drm/omap_drm.h:89:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:93:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:94:2: error: unknown type name 'uint32_t' uint32_t pad; /usr/include/drm/omap_drm.h:95:2: error: unknown type name 'uint64_t' uint64_t offset; /* mmap offset (out) */ /usr/include/drm/omap_drm.h:102:2: error: unknown type name 'uint32_t' uint32_t size; /* virtual size for mmap'ing (out) */ /usr/include/drm/omap_drm.h:103:2: error: unknown type name 'uint32_t' uint32_t __pad; Fixes: ef6503e89194 ("drm: Kbuild: add omap_drm.h to the installed headers") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-02-25 16:29:50 +03:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
uapi: fix drm/omap_drm.h userspace compilation errors Consistently use types from linux/types.h like in other uapi drm/*_drm.h header files to fix the following drm/omap_drm.h userspace compilation errors: /usr/include/drm/omap_drm.h:36:2: error: unknown type name 'uint64_t' uint64_t param; /* in */ /usr/include/drm/omap_drm.h:37:2: error: unknown type name 'uint64_t' uint64_t value; /* in (set_param), out (get_param) */ /usr/include/drm/omap_drm.h:56:2: error: unknown type name 'uint32_t' uint32_t bytes; /* (for non-tiled formats) */ /usr/include/drm/omap_drm.h:58:3: error: unknown type name 'uint16_t' uint16_t width; /usr/include/drm/omap_drm.h:59:3: error: unknown type name 'uint16_t' uint16_t height; /usr/include/drm/omap_drm.h:65:2: error: unknown type name 'uint32_t' uint32_t flags; /* in */ /usr/include/drm/omap_drm.h:66:2: error: unknown type name 'uint32_t' uint32_t handle; /* out */ /usr/include/drm/omap_drm.h:67:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:77:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:78:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:82:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:83:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:88:2: error: unknown type name 'uint32_t' uint32_t nregions; /usr/include/drm/omap_drm.h:89:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:93:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:94:2: error: unknown type name 'uint32_t' uint32_t pad; /usr/include/drm/omap_drm.h:95:2: error: unknown type name 'uint64_t' uint64_t offset; /* mmap offset (out) */ /usr/include/drm/omap_drm.h:102:2: error: unknown type name 'uint32_t' uint32_t size; /* virtual size for mmap'ing (out) */ /usr/include/drm/omap_drm.h:103:2: error: unknown type name 'uint32_t' uint32_t __pad; Fixes: ef6503e89194 ("drm: Kbuild: add omap_drm.h to the installed headers") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-02-25 16:29:50 +03:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 12:09:40 -06:00