linux/drivers/video/fbdev/core/fbcon.c

3727 lines
91 KiB

fbcon: Make fbcon a built-time depency for fbdev There's a bunch of folks who're trying to make printk less contended and faster, but there's a problem: printk uses the console_lock, and the console lock has become the BKL for all things fbdev/fbcon, which in turn pulled in half the drm subsystem under that lock. That's awkward. There reasons for that is probably just a historical accident: - fbcon is a runtime option of fbdev, i.e. at runtime you can pick whether your fbdev driver instances are used as kernel consoles. Unfortunately this wasn't implemented with some module option, but through some module loading magic: As long as you don't load fbcon.ko, there's no fbdev console support, but loading it (in any order wrt fbdev drivers) will create console instances for all fbdev drivers. - This was implemented through a notifier chain. fbcon.ko enumerates all fbdev instances at load time and also registers itself as listener in the fbdev notifier. The fbdev core tries to register new fbdev instances with fbcon using the notifier. - On top of that the modifier chain is also used at runtime by the fbdev subsystem to e.g. control backlights for panels. - The problem is that the notifier puts a mutex locking context between fbdev and fbcon, which mixes up the locking contexts for both the runtime usage and the register time usage to notify fbcon. And at runtime fbcon (through the fbdev core) might call into the notifier from a printk critical section while console_lock is held. - This means console_lock must be an outer lock for the entire fbdev subsystem, which also means it must be acquired when registering a new framebuffer driver as the outermost lock since we might call into fbcon (through the notifier) which would result in a locking inversion if fbcon would acquire the console_lock from its notifier callback (which it needs to register the console). - console_lock can be held anywhere, since printk can be called anywhere, and through the above story, plus drm/kms being an fbdev driver, we pull in a shocking amount of locking hiercharchy underneath the console_lock. Which makes cleaning up printk really hard (not even splitting console_lock into an rwsem is all that useful due to this). There's various ways to address this, but the cleanest would be to make fbcon a compile-time option, where fbdev directly calls the fbcon register functions from register_framebuffer, or dummy static inline versions if fbcon is disabled. Maybe augmented with a runtime knob to disable fbcon, if that's needed (for debugging perhaps). But this could break some users who rely on the magic "loading fbcon.ko enables/disables fbdev framebuffers at runtime" thing, even if that's unlikely. Hence we must be careful: 1. Create a compile-time dependency between fbcon and fbdev in the least minimal way. This is what this patch does. 2. Wait at least 1 year to give possible users time to scream about how we broke their setup. Unlikely, since all distros make fbcon compile-in, and embedded platforms only compile stuff they know they need anyway. But still. 3. Convert the notifier to direct functions calls, with dummy static inlines if fbcon is disabled. We'll still need the fb notifier for the other uses (like backlights), but we can probably move it into the fb core (atm it must be built-into vmlinux). 4. Push console_lock down the call-chain, until it is down in console_register again. 5. Finally start to clean up and rework the printk/console locking. For context of this saga see commit 50e244cc793d511b86adea24972f3a7264cae114 Author: Alan Cox <alan@linux.intel.com> Date: Fri Jan 25 10:28:15 2013 +1000 fb: rework locking to fix lock ordering on takeover plus the pile of commits on top that tried to make this all work without terminally upsetting lockdep. We've uncovered all this when console_lock lockdep annotations where added in commit daee779718a319ff9f83e1ba3339334ac650bb22 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Sep 22 19:52:11 2012 +0200 console: implement lockdep support for console_lock On the patch itself: - Switch CONFIG_FRAMEBUFFER_CONSOLE to be a boolean, using the overall CONFIG_FB tristate to decided whether it should be a module or built-in. - At first I thought I could force the build depency with just a dummy symbol that fbcon.ko exports and fb.ko uses. But that leads to a module depency cycle (it works fine when built-in). Since this tight binding is the entire goal the simplest solution is to move all the fbcon modules (and there's a bunch of optinal source-files which are each modules of their own, for no good reason) into the overall fb.ko core module. That's a bit more than what I would have liked to do in this patch, but oh well. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01 17:32:07 +02:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
treewide: kmalloc() -> kmalloc_array() The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 13:55:00 -07:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
fbcon: Clean up fbcon data in fb_info on FB_EVENT_FB_UNBIND with 0 fbs When FB_EVENT_FB_UNBIND is sent, fbcon has two paths, one path taken when there is another frame buffer to switch any affected vcs to and another path when there isn't. In the case where there is another frame buffer to use, fbcon_fb_unbind calls set_con2fb_map to remap all of the affected vcs to the replacement frame buffer. set_con2fb_map will eventually call con2fb_release_oldinfo when the last vcs gets unmapped from the old frame buffer. con2fb_release_oldinfo frees the fbcon data that is hooked off of the fb_info structure, including the cursor timer. In the case where there isn't another frame buffer to use, fbcon_fb_unbind simply calls fbcon_unbind, which doesn't clear the con2fb_map or free the fbcon data hooked from the fb_info structure. In particular, it doesn't stop the cursor blink timer. When the fb_info structure is then freed, we end up with a timer queue pointing into freed memory and "bad things" start happening. This patch first changes con2fb_release_oldinfo so that it can take a NULL pointer for the new frame buffer, but still does all of the deallocation and cursor timer cleanup. Finally, the patch tries to replicate some of what set_con2fb_map does by clearing the con2fb_map for the affected vcs and calling the modified con2fb_release_info function to clean up the fb_info structure. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-20 13:31:10 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
fbcon: Remove fbcon_has_exited This is unused code since commit 6104c37094e729f3d4ce65797002112735d49cd1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Aug 1 17:32:07 2017 +0200 fbcon: Make fbcon a built-time depency for fbdev when fbcon was made a compile-time static dependency of fbdev. We can't exit fbcon anymore without exiting fbdev first, which only works if all fbdev drivers have unloaded already. Hence this is all dead code. v2: I missed that fbcon_exit is also called from con_deinit stuff, and there fbcon_has_exited prevents double-cleanup. But we can fix that by properly resetting con2fb_map[] to all -1, which is used everywhere else to indicate "no fb_info allocate to this console". With that change the double-cleanup (which resulted in a module refcount underflow, among other things) is prevented. Aside: con2fb_map is a signed char, so don't register more than 128 fb_info or hilarity will ensue. v3: CI showed me that I still didn't fully understand what's going on here. The leaked references in con2fb_map have been used upon rebinding the fb console in fbcon_init. It worked because fbdev unregistering still cleaned out con2fb_map, and reset it to info_idx. If the last fbdev driver unregistered, then it also reset info_idx, and unregistered the fbcon driver. Imo that's all a bit fragile, so let's keep the con2fb_map reset to -1, and in fbcon_init pick info_idx if we're starting fresh. That means unbinding and rebinding will cleanse the mapping, but why are you doing that if you want to retain the mapping, so should be fine. Also, I think info_idx == -1 is impossible in fbcon_init - we unregister the fbcon in that case. So catch&warn about that. v4: Drop unecessary assignment - I forgot to delete the first assignment of info in fbcon_init. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kees Cook <keescook@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-10-daniel.vetter@ffwll.ch
2019-05-28 11:02:40 +02:00
fbcon: Remove fbcon_has_exited This is unused code since commit 6104c37094e729f3d4ce65797002112735d49cd1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Aug 1 17:32:07 2017 +0200 fbcon: Make fbcon a built-time depency for fbdev when fbcon was made a compile-time static dependency of fbdev. We can't exit fbcon anymore without exiting fbdev first, which only works if all fbdev drivers have unloaded already. Hence this is all dead code. v2: I missed that fbcon_exit is also called from con_deinit stuff, and there fbcon_has_exited prevents double-cleanup. But we can fix that by properly resetting con2fb_map[] to all -1, which is used everywhere else to indicate "no fb_info allocate to this console". With that change the double-cleanup (which resulted in a module refcount underflow, among other things) is prevented. Aside: con2fb_map is a signed char, so don't register more than 128 fb_info or hilarity will ensue. v3: CI showed me that I still didn't fully understand what's going on here. The leaked references in con2fb_map have been used upon rebinding the fb console in fbcon_init. It worked because fbdev unregistering still cleaned out con2fb_map, and reset it to info_idx. If the last fbdev driver unregistered, then it also reset info_idx, and unregistered the fbcon driver. Imo that's all a bit fragile, so let's keep the con2fb_map reset to -1, and in fbcon_init pick info_idx if we're starting fresh. That means unbinding and rebinding will cleanse the mapping, but why are you doing that if you want to retain the mapping, so should be fine. Also, I think info_idx == -1 is impossible in fbcon_init - we unregister the fbcon in that case. So catch&warn about that. v4: Drop unecessary assignment - I forgot to delete the first assignment of info in fbcon_init. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kees Cook <keescook@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-10-daniel.vetter@ffwll.ch
2019-05-28 11:02:40 +02:00
fbcon: Remove fbcon_has_exited This is unused code since commit 6104c37094e729f3d4ce65797002112735d49cd1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Aug 1 17:32:07 2017 +0200 fbcon: Make fbcon a built-time depency for fbdev when fbcon was made a compile-time static dependency of fbdev. We can't exit fbcon anymore without exiting fbdev first, which only works if all fbdev drivers have unloaded already. Hence this is all dead code. v2: I missed that fbcon_exit is also called from con_deinit stuff, and there fbcon_has_exited prevents double-cleanup. But we can fix that by properly resetting con2fb_map[] to all -1, which is used everywhere else to indicate "no fb_info allocate to this console". With that change the double-cleanup (which resulted in a module refcount underflow, among other things) is prevented. Aside: con2fb_map is a signed char, so don't register more than 128 fb_info or hilarity will ensue. v3: CI showed me that I still didn't fully understand what's going on here. The leaked references in con2fb_map have been used upon rebinding the fb console in fbcon_init. It worked because fbdev unregistering still cleaned out con2fb_map, and reset it to info_idx. If the last fbdev driver unregistered, then it also reset info_idx, and unregistered the fbcon driver. Imo that's all a bit fragile, so let's keep the con2fb_map reset to -1, and in fbcon_init pick info_idx if we're starting fresh. That means unbinding and rebinding will cleanse the mapping, but why are you doing that if you want to retain the mapping, so should be fine. Also, I think info_idx == -1 is impossible in fbcon_init - we unregister the fbcon in that case. So catch&warn about that. v4: Drop unecessary assignment - I forgot to delete the first assignment of info in fbcon_init. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kees Cook <keescook@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-10-daniel.vetter@ffwll.ch
2019-05-28 11:02:40 +02:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
fbcon: don't use vc_resize() on initialization Catalin and kmemleak spotted a leak of a VC screen buffer in vc_allocate() due to the following chain of events: vc_allocate() visual_init(init=1) vc->vc_sw->con_init(init=1) fbcon_init() vc_resize() vc->screen_buf = kmalloc() vc->screen_buf = kmalloc() The common way for the VC drivers is to set the screen dimension parameters manually in the init case and only call vc_resize() for !init - which allocates a screen buffer according to the new dimensions. fbcon instead would do vc_resize() unconditionally and afterwards set the dimensions manually (again) for !init - i.e. completely upside down. The vc_resize() allocated buffer would then get lost by vc_allocate() allocating a fresh one. Use vc_resize() only for actual resizing to close the leak. Set the dimensions manually only in initialization mode to remove the redundant setting in resize mode. The kmemleak trace from Catalin: unreferenced object 0xde158000 (size 12288): comm "Xorg", pid 1439, jiffies 4294961016 hex dump (first 32 bytes): 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 . . . . . . . . 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 . . . . . . . . backtrace: [<c006f74b>] __save_stack_trace+0x17/0x1c [<c006f81d>] create_object+0xcd/0x188 [<c01f5457>] kmemleak_alloc+0x1b/0x3c [<c006e303>] __kmalloc+0xdb/0xe8 [<c012cc4b>] vc_do_resize+0x73/0x1e0 [<c012cdf1>] vc_resize+0x15/0x18 [<c011afc1>] fbcon_init+0x1f9/0x2b8 [<c0129e87>] visual_init+0x9f/0xdc [<c012aff3>] vc_allocate+0x7f/0xfc [<c012b087>] con_open+0x17/0x80 [<c0120e43>] tty_open+0x1f7/0x2e4 [<c0072fa1>] chrdev_open+0x101/0x118 [<c006ffad>] __dentry_open+0x105/0x1cc [<c00700fd>] nameidata_to_filp+0x2d/0x38 [<c00788cd>] do_filp_open+0x2c1/0x54c [<c006fdff>] do_sys_open+0x3b/0xb4 Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Tested-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-06 15:07:36 -07:00
fbcon: don't use vc_resize() on initialization Catalin and kmemleak spotted a leak of a VC screen buffer in vc_allocate() due to the following chain of events: vc_allocate() visual_init(init=1) vc->vc_sw->con_init(init=1) fbcon_init() vc_resize() vc->screen_buf = kmalloc() vc->screen_buf = kmalloc() The common way for the VC drivers is to set the screen dimension parameters manually in the init case and only call vc_resize() for !init - which allocates a screen buffer according to the new dimensions. fbcon instead would do vc_resize() unconditionally and afterwards set the dimensions manually (again) for !init - i.e. completely upside down. The vc_resize() allocated buffer would then get lost by vc_allocate() allocating a fresh one. Use vc_resize() only for actual resizing to close the leak. Set the dimensions manually only in initialization mode to remove the redundant setting in resize mode. The kmemleak trace from Catalin: unreferenced object 0xde158000 (size 12288): comm "Xorg", pid 1439, jiffies 4294961016 hex dump (first 32 bytes): 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 . . . . . . . . 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 . . . . . . . . backtrace: [<c006f74b>] __save_stack_trace+0x17/0x1c [<c006f81d>] create_object+0xcd/0x188 [<c01f5457>] kmemleak_alloc+0x1b/0x3c [<c006e303>] __kmalloc+0xdb/0xe8 [<c012cc4b>] vc_do_resize+0x73/0x1e0 [<c012cdf1>] vc_resize+0x15/0x18 [<c011afc1>] fbcon_init+0x1f9/0x2b8 [<c0129e87>] visual_init+0x9f/0xdc [<c012aff3>] vc_allocate+0x7f/0xfc [<c012b087>] con_open+0x17/0x80 [<c0120e43>] tty_open+0x1f7/0x2e4 [<c0072fa1>] chrdev_open+0x101/0x118 [<c006ffad>] __dentry_open+0x105/0x1cc [<c00700fd>] nameidata_to_filp+0x2d/0x38 [<c00788cd>] do_filp_open+0x2c1/0x54c [<c006fdff>] do_sys_open+0x3b/0xb4 Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Tested-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-06 15:07:36 -07:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
fbcon: Avoid deleting a timer in IRQ context Commit 27a4c827c34a ("fbcon: use the cursor blink interval provided by vt") unconditionally removes the cursor blink timer. Unfortunately that wreaks havoc under some circumstances. An easily reproducible way is to use both the framebuffer console and a debug serial port as the console output for kernel messages (e.g. "console=ttyS0 console=tty1" on the kernel command-line. Upon boot this triggers a warning from within the del_timer_sync() function because it is called from IRQ context: [ 5.070096] ------------[ cut here ]------------ [ 5.070110] WARNING: CPU: 0 PID: 0 at ../kernel/time/timer.c:1098 del_timer_sync+0x4c/0x54() [ 5.070115] Modules linked in: [ 5.070120] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.0-rc4-next-20150519 #1 [ 5.070123] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 5.070142] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 5.070156] [] (show_stack) from [] (dump_stack+0x70/0xbc) [ 5.070164] [] (dump_stack) from [] (warn_slowpath_common+0x74/0xb0) [ 5.070169] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x1c/0x24) [ 5.070174] [] (warn_slowpath_null) from [] (del_timer_sync+0x4c/0x54) [ 5.070183] [] (del_timer_sync) from [] (fbcon_del_cursor_timer+0x2c/0x40) [ 5.070190] [] (fbcon_del_cursor_timer) from [] (fbcon_cursor+0x9c/0x180) [ 5.070198] [] (fbcon_cursor) from [] (hide_cursor+0x30/0x98) [ 5.070204] [] (hide_cursor) from [] (vt_console_print+0x2a8/0x340) [ 5.070212] [] (vt_console_print) from [] (call_console_drivers.constprop.23+0xc8/0xec) [ 5.070218] [] (call_console_drivers.constprop.23) from [] (console_unlock+0x498/0x4f0) [ 5.070223] [] (console_unlock) from [] (vprintk_emit+0x1f0/0x508) [ 5.070228] [] (vprintk_emit) from [] (vprintk_default+0x24/0x2c) [ 5.070234] [] (vprintk_default) from [] (printk+0x70/0x88) After which the system starts spewing all kinds of weird and seemingly unrelated error messages. This commit fixes this by restoring the condition under which the call to fbcon_del_cursor_timer() happens. Reported-by: Daniel Stone <daniel@fooishbar.org> Reported-by: Kevin Hilman <khilman@kernel.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Scot Doyle <lkml14@scotdoyle.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Tested-by: Andrew Vagin <avagin@virtuozzo.com> Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-21 09:58:03 +02:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
fbcon_set_all_vcs: fix kernel crash when switching the rotated consoles echo 3 >> /sys/class/graphics/fbcon/rotate_all, then switch to another console. Result: BUG: unable to handle kernel paging request at ffffc20005d00000 IP: [bitfill_aligned+149/265] bitfill_aligned+0x95/0x109 PGD 7e228067 PUD 7e229067 PMD 7bc1f067 PTE 0 Oops: 0002 [1] SMP CPU 1 Modules linked in: [...a lot...] Pid: 10, comm: events/1 Not tainted 2.6.26.5-45.fc9.x86_64 #1 RIP: 0010:[bitfill_aligned+149/265] [bitfill_aligned+149/265] bitfill_aligned+0x95/0x109 RSP: 0018:ffff81007d811bc8 EFLAGS: 00010216 RAX: ffffc20005d00000 RBX: 0000000000000000 RCX: 0000000000000400 RDX: 0000000000000000 RSI: ffffc20005d00000 RDI: ffffffffffffffff RBP: ffff81007d811be0 R08: 0000000000000400 R09: 0000000000000040 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000010000 R13: ffffffff811632f0 R14: 0000000000000006 R15: ffff81007cb85400 FS: 0000000000000000(0000) GS:ffff81007e004780(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: ffffc20005d00000 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process events/1 (pid: 10, threadinfo ffff81007d810000, task ffff81007d808000) Stack: ffff81007c9d75a0 0000000000000000 0000000000000000 ffff81007d811c80 ffffffff81163a61 ffff810000000000 ffffffff8115f9c8 0000001000000000 0000000100aaaaaa 000000007cd0d4a0 fffffd8a00000800 0001000000000000 Call Trace: [cfb_fillrect+523/798] cfb_fillrect+0x20b/0x31e [soft_cursor+416/436] ? soft_cursor+0x1a0/0x1b4 [ccw_clear_margins+205/263] ccw_clear_margins+0xcd/0x107 [fbcon_clear_margins+59/61] fbcon_clear_margins+0x3b/0x3d [fbcon_switch+1291/1466] fbcon_switch+0x50b/0x5ba [redraw_screen+261/481] redraw_screen+0x105/0x1e1 [ccw_cursor+0/1869] ? ccw_cursor+0x0/0x74d [complete_change_console+48/190] complete_change_console+0x30/0xbe [change_console+115/120] change_console+0x73/0x78 [console_callback+0/292] ? console_callback+0x0/0x124 [console_callback+97/292] console_callback+0x61/0x124 [schedule_delayed_work+25/30] ? schedule_delayed_work+0x19/0x1e [run_workqueue+139/282] run_workqueue+0x8b/0x11a [worker_thread+221/238] worker_thread+0xdd/0xee [autoremove_wake_function+0/56] ? autoremove_wake_function+0x0/0x38 [worker_thread+0/238] ? worker_thread+0x0/0xee [kthread+73/118] kthread+0x49/0x76 [child_rip+10/18] child_rip+0xa/0x12 [kthread+0/118] ? kthread+0x0/0x76 [child_rip+0/18] ? child_rip+0x0/0x12 Because fbcon_set_all_vcs()->FBCON_SWAP() uses display->rotate == 0 instead of fbcon_ops->rotate, and vc_resize() has no effect because it is called with new_cols/rows == ->vc_cols/rows. Tested on 2.6.26.5-45.fc9.x86_64, but http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git seems to have the same problem. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> [2.6.27.x, 2.6.26.x, maybe 2.6.25.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-15 22:03:57 -07:00
[PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 21:39:09 -08:00
fbcon: replace FB_EVENT_MODE_CHANGE/_ALL with direct calls Create a new wrapper function for this, feels like there's some refactoring room here between the two modes. v2: backlight notifier is also interested in the mode change event, it calls lcd->set_mode, of which there are 3 implementations. Thanks to Maarten for spotting this. So we keep that. We can ditch the differentiation between mode change and all mode changes (because backlight notifier doesn't care), and we can drop the FBINFO_MISC_USEREVENT stuff too, because that's just to prevent recursion between fbmem.c and fbcon.c. While at it flatten the control flow a bit. v3: Need to add a static inline to the dummy function. v4: Add missing #include <fbcon.h> to sh_mob (Sam). Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Peter Rosin <peda@axentia.se> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-29-daniel.vetter@ffwll.ch
2019-05-28 11:02:59 +02:00
fbcon: replace FB_EVENT_MODE_CHANGE/_ALL with direct calls Create a new wrapper function for this, feels like there's some refactoring room here between the two modes. v2: backlight notifier is also interested in the mode change event, it calls lcd->set_mode, of which there are 3 implementations. Thanks to Maarten for spotting this. So we keep that. We can ditch the differentiation between mode change and all mode changes (because backlight notifier doesn't care), and we can drop the FBINFO_MISC_USEREVENT stuff too, because that's just to prevent recursion between fbmem.c and fbcon.c. While at it flatten the control flow a bit. v3: Need to add a static inline to the dummy function. v4: Add missing #include <fbcon.h> to sh_mob (Sam). Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Peter Rosin <peda@axentia.se> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-29-daniel.vetter@ffwll.ch
2019-05-28 11:02:59 +02:00
fbdev: fbcon: Fix unregister crash when more than one framebuffer When unregistering fbdev using unregister_framebuffer(), any bound console will unbind automatically. This is working fine if this is the only framebuffer, resulting in a switch to the dummy console. However if there is a fb0 and I unregister fb1 having a bound console, I eventually get a crash. The fastest way for me to trigger the crash is to do a reboot, resulting in this splat: [ 76.478825] WARNING: CPU: 0 PID: 527 at linux/kernel/workqueue.c:1442 __queue_work+0x2d4/0x41c [ 76.478849] Modules linked in: raspberrypi_hwmon gpio_backlight backlight bcm2835_rng rng_core [last unloaded: tinydrm] [ 76.478916] CPU: 0 PID: 527 Comm: systemd-udevd Not tainted 4.20.0-rc4+ #4 [ 76.478933] Hardware name: BCM2835 [ 76.478949] Backtrace: [ 76.478995] [<c010d388>] (dump_backtrace) from [<c010d670>] (show_stack+0x20/0x24) [ 76.479022] r6:00000000 r5:c0bc73be r4:00000000 r3:6fb5bf81 [ 76.479060] [<c010d650>] (show_stack) from [<c08e82f4>] (dump_stack+0x20/0x28) [ 76.479102] [<c08e82d4>] (dump_stack) from [<c0120070>] (__warn+0xec/0x12c) [ 76.479134] [<c011ff84>] (__warn) from [<c01201e4>] (warn_slowpath_null+0x4c/0x58) [ 76.479165] r9:c0eb6944 r8:00000001 r7:c0e927f8 r6:c0bc73be r5:000005a2 r4:c0139e84 [ 76.479197] [<c0120198>] (warn_slowpath_null) from [<c0139e84>] (__queue_work+0x2d4/0x41c) [ 76.479222] r6:d7666a00 r5:c0e918ee r4:dbc4e700 [ 76.479251] [<c0139bb0>] (__queue_work) from [<c013a02c>] (queue_work_on+0x60/0x88) [ 76.479281] r10:c0496bf8 r9:00000100 r8:c0e92ae0 r7:00000001 r6:d9403700 r5:d7666a00 [ 76.479298] r4:20000113 [ 76.479348] [<c0139fcc>] (queue_work_on) from [<c0496c28>] (cursor_timer_handler+0x30/0x54) [ 76.479374] r7:d8a8fabc r6:c0e08088 r5:d8afdc5c r4:d8a8fabc [ 76.479413] [<c0496bf8>] (cursor_timer_handler) from [<c0178744>] (call_timer_fn+0x100/0x230) [ 76.479435] r4:c0e9192f r3:d758a340 [ 76.479465] [<c0178644>] (call_timer_fn) from [<c0178980>] (expire_timers+0x10c/0x12c) [ 76.479495] r10:40000000 r9:c0e9192f r8:c0e92ae0 r7:d8afdccc r6:c0e19280 r5:c0496bf8 [ 76.479513] r4:d8a8fabc [ 76.479541] [<c0178874>] (expire_timers) from [<c0179630>] (run_timer_softirq+0xa8/0x184) [ 76.479570] r9:00000001 r8:c0e19280 r7:00000000 r6:c0e08088 r5:c0e1a3e0 r4:c0e19280 [ 76.479603] [<c0179588>] (run_timer_softirq) from [<c0102404>] (__do_softirq+0x1ac/0x3fc) [ 76.479632] r10:c0e91680 r9:d8afc020 r8:0000000a r7:00000100 r6:00000001 r5:00000002 [ 76.479650] r4:c0eb65ec [ 76.479686] [<c0102258>] (__do_softirq) from [<c0124d10>] (irq_exit+0xe8/0x168) [ 76.479716] r10:d8d1a9b0 r9:d8afc000 r8:00000001 r7:d949c000 r6:00000000 r5:c0e8b3f0 [ 76.479734] r4:00000000 [ 76.479764] [<c0124c28>] (irq_exit) from [<c016b72c>] (__handle_domain_irq+0x94/0xb0) [ 76.479793] [<c016b698>] (__handle_domain_irq) from [<c01021dc>] (bcm2835_handle_irq+0x3c/0x48) [ 76.479823] r8:d8afdebc r7:d8afddfc r6:ffffffff r5:c0e089f8 r4:d8afddc8 r3:d8afddc8 [ 76.479851] [<c01021a0>] (bcm2835_handle_irq) from [<c01019f0>] (__irq_svc+0x70/0x98) The problem is in the console rebinding in fbcon_fb_unbind(). It uses the virtual console index as the new framebuffer index to bind the console(s) to. The correct way is to use the con2fb_map lookup table to find the framebuffer index. Fixes: cfafca8067c6 ("fbdev: fbcon: console unregistration from unregister_framebuffer") Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-12-20 19:13:09 +01:00
fbcon: Clean up fbcon data in fb_info on FB_EVENT_FB_UNBIND with 0 fbs When FB_EVENT_FB_UNBIND is sent, fbcon has two paths, one path taken when there is another frame buffer to switch any affected vcs to and another path when there isn't. In the case where there is another frame buffer to use, fbcon_fb_unbind calls set_con2fb_map to remap all of the affected vcs to the replacement frame buffer. set_con2fb_map will eventually call con2fb_release_oldinfo when the last vcs gets unmapped from the old frame buffer. con2fb_release_oldinfo frees the fbcon data that is hooked off of the fb_info structure, including the cursor timer. In the case where there isn't another frame buffer to use, fbcon_fb_unbind simply calls fbcon_unbind, which doesn't clear the con2fb_map or free the fbcon data hooked from the fb_info structure. In particular, it doesn't stop the cursor blink timer. When the fb_info structure is then freed, we end up with a timer queue pointing into freed memory and "bad things" start happening. This patch first changes con2fb_release_oldinfo so that it can take a NULL pointer for the new frame buffer, but still does all of the deallocation and cursor timer cleanup. Finally, the patch tries to replicate some of what set_con2fb_map does by clearing the con2fb_map for the affected vcs and calling the modified con2fb_release_info function to clean up the fb_info structure. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-20 13:31:10 -08:00
fbcon: Clean up fbcon data in fb_info on FB_EVENT_FB_UNBIND with 0 fbs When FB_EVENT_FB_UNBIND is sent, fbcon has two paths, one path taken when there is another frame buffer to switch any affected vcs to and another path when there isn't. In the case where there is another frame buffer to use, fbcon_fb_unbind calls set_con2fb_map to remap all of the affected vcs to the replacement frame buffer. set_con2fb_map will eventually call con2fb_release_oldinfo when the last vcs gets unmapped from the old frame buffer. con2fb_release_oldinfo frees the fbcon data that is hooked off of the fb_info structure, including the cursor timer. In the case where there isn't another frame buffer to use, fbcon_fb_unbind simply calls fbcon_unbind, which doesn't clear the con2fb_map or free the fbcon data hooked from the fb_info structure. In particular, it doesn't stop the cursor blink timer. When the fb_info structure is then freed, we end up with a timer queue pointing into freed memory and "bad things" start happening. This patch first changes con2fb_release_oldinfo so that it can take a NULL pointer for the new frame buffer, but still does all of the deallocation and cursor timer cleanup. Finally, the patch tries to replicate some of what set_con2fb_map does by clearing the con2fb_map for the affected vcs and calling the modified con2fb_release_info function to clean up the fb_info structure. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-20 13:31:10 -08:00
fbcon: Clean up fbcon data in fb_info on FB_EVENT_FB_UNBIND with 0 fbs When FB_EVENT_FB_UNBIND is sent, fbcon has two paths, one path taken when there is another frame buffer to switch any affected vcs to and another path when there isn't. In the case where there is another frame buffer to use, fbcon_fb_unbind calls set_con2fb_map to remap all of the affected vcs to the replacement frame buffer. set_con2fb_map will eventually call con2fb_release_oldinfo when the last vcs gets unmapped from the old frame buffer. con2fb_release_oldinfo frees the fbcon data that is hooked off of the fb_info structure, including the cursor timer. In the case where there isn't another frame buffer to use, fbcon_fb_unbind simply calls fbcon_unbind, which doesn't clear the con2fb_map or free the fbcon data hooked from the fb_info structure. In particular, it doesn't stop the cursor blink timer. When the fb_info structure is then freed, we end up with a timer queue pointing into freed memory and "bad things" start happening. This patch first changes con2fb_release_oldinfo so that it can take a NULL pointer for the new frame buffer, but still does all of the deallocation and cursor timer cleanup. Finally, the patch tries to replicate some of what set_con2fb_map does by clearing the con2fb_map for the affected vcs and calling the modified con2fb_release_info function to clean up the fb_info structure. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-01-20 13:31:10 -08:00
fbcon: call fbcon_fb_(un)registered directly With commit 6104c37094e729f3d4ce65797002112735d49cd1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Aug 1 17:32:07 2017 +0200 fbcon: Make fbcon a built-time depency for fbdev we have a static dependency between fbcon and fbdev, and we can replace the indirection through the notifier chain with a function call. v2: Sam Ravnborg noticed that mach-pxa/am200epd.c has a notifier too, and listens to this. ... Looking at the code it seems to wait for some fb to show up, so that it can get the framebuffer base address from the fb_info struct. I suspect his is some firmware fbdev. Then it uses that information to let the real fbdev driver (metronomefb.c by the looks) get at the framebuffer memory. This doesn't looke like it's easy to fix (except by deleting the entire thing, seems untouched since 2008, we might be able to get away with that), so let's just stuff a few #ifdef into fb.h and fbmem.c and cry over them for a bit. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: Peter Rosin <peda@axentia.se> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: linux-fbdev@vger.kernel.org Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Steve Sakoman <steve@sakoman.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-11-daniel.vetter@ffwll.ch
2019-05-28 11:02:41 +02:00
fbcon: call fbcon_fb_(un)registered directly With commit 6104c37094e729f3d4ce65797002112735d49cd1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Aug 1 17:32:07 2017 +0200 fbcon: Make fbcon a built-time depency for fbdev we have a static dependency between fbcon and fbdev, and we can replace the indirection through the notifier chain with a function call. v2: Sam Ravnborg noticed that mach-pxa/am200epd.c has a notifier too, and listens to this. ... Looking at the code it seems to wait for some fb to show up, so that it can get the framebuffer base address from the fb_info struct. I suspect his is some firmware fbdev. Then it uses that information to let the real fbdev driver (metronomefb.c by the looks) get at the framebuffer memory. This doesn't looke like it's easy to fix (except by deleting the entire thing, seems untouched since 2008, we might be able to get away with that), so let's just stuff a few #ifdef into fb.h and fbmem.c and cry over them for a bit. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: Peter Rosin <peda@axentia.se> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: linux-fbdev@vger.kernel.org Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Steve Sakoman <steve@sakoman.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-11-daniel.vetter@ffwll.ch
2019-05-28 11:02:41 +02:00
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 15:38:10 +10:00
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 15:38:10 +10:00
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 15:38:10 +10:00
fbcon: call fbcon_fb_(un)registered directly With commit 6104c37094e729f3d4ce65797002112735d49cd1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Aug 1 17:32:07 2017 +0200 fbcon: Make fbcon a built-time depency for fbdev we have a static dependency between fbcon and fbdev, and we can replace the indirection through the notifier chain with a function call. v2: Sam Ravnborg noticed that mach-pxa/am200epd.c has a notifier too, and listens to this. ... Looking at the code it seems to wait for some fb to show up, so that it can get the framebuffer base address from the fb_info struct. I suspect his is some firmware fbdev. Then it uses that information to let the real fbdev driver (metronomefb.c by the looks) get at the framebuffer memory. This doesn't looke like it's easy to fix (except by deleting the entire thing, seems untouched since 2008, we might be able to get away with that), so let's just stuff a few #ifdef into fb.h and fbmem.c and cry over them for a bit. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: Peter Rosin <peda@axentia.se> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: linux-fbdev@vger.kernel.org Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Steve Sakoman <steve@sakoman.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-11-daniel.vetter@ffwll.ch
2019-05-28 11:02:41 +02:00
2018-08-10 17:23:01 +02:00
2018-08-10 17:23:01 +02:00
2018-08-10 17:23:01 +02:00
2010-09-22 13:05:05 -07:00
2010-09-22 13:05:05 -07:00
fbcon: Remove fbcon_has_exited This is unused code since commit 6104c37094e729f3d4ce65797002112735d49cd1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Aug 1 17:32:07 2017 +0200 fbcon: Make fbcon a built-time depency for fbdev when fbcon was made a compile-time static dependency of fbdev. We can't exit fbcon anymore without exiting fbdev first, which only works if all fbdev drivers have unloaded already. Hence this is all dead code. v2: I missed that fbcon_exit is also called from con_deinit stuff, and there fbcon_has_exited prevents double-cleanup. But we can fix that by properly resetting con2fb_map[] to all -1, which is used everywhere else to indicate "no fb_info allocate to this console". With that change the double-cleanup (which resulted in a module refcount underflow, among other things) is prevented. Aside: con2fb_map is a signed char, so don't register more than 128 fb_info or hilarity will ensue. v3: CI showed me that I still didn't fully understand what's going on here. The leaked references in con2fb_map have been used upon rebinding the fb console in fbcon_init. It worked because fbdev unregistering still cleaned out con2fb_map, and reset it to info_idx. If the last fbdev driver unregistered, then it also reset info_idx, and unregistered the fbcon driver. Imo that's all a bit fragile, so let's keep the con2fb_map reset to -1, and in fbcon_init pick info_idx if we're starting fresh. That means unbinding and rebinding will cleanse the mapping, but why are you doing that if you want to retain the mapping, so should be fine. Also, I think info_idx == -1 is impossible in fbcon_init - we unregister the fbcon in that case. So catch&warn about that. v4: Drop unecessary assignment - I forgot to delete the first assignment of info in fbcon_init. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: Yisheng Xie <ysxie@foxmail.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kees Cook <keescook@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-10-daniel.vetter@ffwll.ch
2019-05-28 11:02:40 +02:00
fbcon: Make fbcon a built-time depency for fbdev There's a bunch of folks who're trying to make printk less contended and faster, but there's a problem: printk uses the console_lock, and the console lock has become the BKL for all things fbdev/fbcon, which in turn pulled in half the drm subsystem under that lock. That's awkward. There reasons for that is probably just a historical accident: - fbcon is a runtime option of fbdev, i.e. at runtime you can pick whether your fbdev driver instances are used as kernel consoles. Unfortunately this wasn't implemented with some module option, but through some module loading magic: As long as you don't load fbcon.ko, there's no fbdev console support, but loading it (in any order wrt fbdev drivers) will create console instances for all fbdev drivers. - This was implemented through a notifier chain. fbcon.ko enumerates all fbdev instances at load time and also registers itself as listener in the fbdev notifier. The fbdev core tries to register new fbdev instances with fbcon using the notifier. - On top of that the modifier chain is also used at runtime by the fbdev subsystem to e.g. control backlights for panels. - The problem is that the notifier puts a mutex locking context between fbdev and fbcon, which mixes up the locking contexts for both the runtime usage and the register time usage to notify fbcon. And at runtime fbcon (through the fbdev core) might call into the notifier from a printk critical section while console_lock is held. - This means console_lock must be an outer lock for the entire fbdev subsystem, which also means it must be acquired when registering a new framebuffer driver as the outermost lock since we might call into fbcon (through the notifier) which would result in a locking inversion if fbcon would acquire the console_lock from its notifier callback (which it needs to register the console). - console_lock can be held anywhere, since printk can be called anywhere, and through the above story, plus drm/kms being an fbdev driver, we pull in a shocking amount of locking hiercharchy underneath the console_lock. Which makes cleaning up printk really hard (not even splitting console_lock into an rwsem is all that useful due to this). There's various ways to address this, but the cleanest would be to make fbcon a compile-time option, where fbdev directly calls the fbcon register functions from register_framebuffer, or dummy static inline versions if fbcon is disabled. Maybe augmented with a runtime knob to disable fbcon, if that's needed (for debugging perhaps). But this could break some users who rely on the magic "loading fbcon.ko enables/disables fbdev framebuffers at runtime" thing, even if that's unlikely. Hence we must be careful: 1. Create a compile-time dependency between fbcon and fbdev in the least minimal way. This is what this patch does. 2. Wait at least 1 year to give possible users time to scream about how we broke their setup. Unlikely, since all distros make fbcon compile-in, and embedded platforms only compile stuff they know they need anyway. But still. 3. Convert the notifier to direct functions calls, with dummy static inlines if fbcon is disabled. We'll still need the fb notifier for the other uses (like backlights), but we can probably move it into the fb core (atm it must be built-into vmlinux). 4. Push console_lock down the call-chain, until it is down in console_register again. 5. Finally start to clean up and rework the printk/console locking. For context of this saga see commit 50e244cc793d511b86adea24972f3a7264cae114 Author: Alan Cox <alan@linux.intel.com> Date: Fri Jan 25 10:28:15 2013 +1000 fb: rework locking to fix lock ordering on takeover plus the pile of commits on top that tried to make this all work without terminally upsetting lockdep. We've uncovered all this when console_lock lockdep annotations where added in commit daee779718a319ff9f83e1ba3339334ac650bb22 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Sep 22 19:52:11 2012 +0200 console: implement lockdep support for console_lock On the patch itself: - Switch CONFIG_FRAMEBUFFER_CONSOLE to be a boolean, using the overall CONFIG_FB tristate to decided whether it should be a module or built-in. - At first I thought I could force the build depency with just a dummy symbol that fbcon.ko exports and fb.ko uses. But that leads to a module depency cycle (it works fine when built-in). Since this tight binding is the entire goal the simplest solution is to move all the fbcon modules (and there's a bunch of optinal source-files which are each modules of their own, for no good reason) into the overall fb.ko core module. That's a bit more than what I would have liked to do in this patch, but oh well. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01 17:32:07 +02:00
2018-08-10 17:23:01 +02:00
fbcon: Make fbcon a built-time depency for fbdev There's a bunch of folks who're trying to make printk less contended and faster, but there's a problem: printk uses the console_lock, and the console lock has become the BKL for all things fbdev/fbcon, which in turn pulled in half the drm subsystem under that lock. That's awkward. There reasons for that is probably just a historical accident: - fbcon is a runtime option of fbdev, i.e. at runtime you can pick whether your fbdev driver instances are used as kernel consoles. Unfortunately this wasn't implemented with some module option, but through some module loading magic: As long as you don't load fbcon.ko, there's no fbdev console support, but loading it (in any order wrt fbdev drivers) will create console instances for all fbdev drivers. - This was implemented through a notifier chain. fbcon.ko enumerates all fbdev instances at load time and also registers itself as listener in the fbdev notifier. The fbdev core tries to register new fbdev instances with fbcon using the notifier. - On top of that the modifier chain is also used at runtime by the fbdev subsystem to e.g. control backlights for panels. - The problem is that the notifier puts a mutex locking context between fbdev and fbcon, which mixes up the locking contexts for both the runtime usage and the register time usage to notify fbcon. And at runtime fbcon (through the fbdev core) might call into the notifier from a printk critical section while console_lock is held. - This means console_lock must be an outer lock for the entire fbdev subsystem, which also means it must be acquired when registering a new framebuffer driver as the outermost lock since we might call into fbcon (through the notifier) which would result in a locking inversion if fbcon would acquire the console_lock from its notifier callback (which it needs to register the console). - console_lock can be held anywhere, since printk can be called anywhere, and through the above story, plus drm/kms being an fbdev driver, we pull in a shocking amount of locking hiercharchy underneath the console_lock. Which makes cleaning up printk really hard (not even splitting console_lock into an rwsem is all that useful due to this). There's various ways to address this, but the cleanest would be to make fbcon a compile-time option, where fbdev directly calls the fbcon register functions from register_framebuffer, or dummy static inline versions if fbcon is disabled. Maybe augmented with a runtime knob to disable fbcon, if that's needed (for debugging perhaps). But this could break some users who rely on the magic "loading fbcon.ko enables/disables fbdev framebuffers at runtime" thing, even if that's unlikely. Hence we must be careful: 1. Create a compile-time dependency between fbcon and fbdev in the least minimal way. This is what this patch does. 2. Wait at least 1 year to give possible users time to scream about how we broke their setup. Unlikely, since all distros make fbcon compile-in, and embedded platforms only compile stuff they know they need anyway. But still. 3. Convert the notifier to direct functions calls, with dummy static inlines if fbcon is disabled. We'll still need the fb notifier for the other uses (like backlights), but we can probably move it into the fb core (atm it must be built-into vmlinux). 4. Push console_lock down the call-chain, until it is down in console_register again. 5. Finally start to clean up and rework the printk/console locking. For context of this saga see commit 50e244cc793d511b86adea24972f3a7264cae114 Author: Alan Cox <alan@linux.intel.com> Date: Fri Jan 25 10:28:15 2013 +1000 fb: rework locking to fix lock ordering on takeover plus the pile of commits on top that tried to make this all work without terminally upsetting lockdep. We've uncovered all this when console_lock lockdep annotations where added in commit daee779718a319ff9f83e1ba3339334ac650bb22 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Sep 22 19:52:11 2012 +0200 console: implement lockdep support for console_lock On the patch itself: - Switch CONFIG_FRAMEBUFFER_CONSOLE to be a boolean, using the overall CONFIG_FB tristate to decided whether it should be a module or built-in. - At first I thought I could force the build depency with just a dummy symbol that fbcon.ko exports and fb.ko uses. But that leads to a module depency cycle (it works fine when built-in). Since this tight binding is the entire goal the simplest solution is to move all the fbcon modules (and there's a bunch of optinal source-files which are each modules of their own, for no good reason) into the overall fb.ko core module. That's a bit more than what I would have liked to do in this patch, but oh well. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-08-01 17:32:07 +02:00