linux/security/integrity/digsig.c

178 lines
4.1 KiB

KEYS: Move the point of trust determination to __key_link() Move the point at which a key is determined to be trustworthy to __key_link() so that we use the contents of the keyring being linked in to to determine whether the key being linked in is trusted or not. What is 'trusted' then becomes a matter of what's in the keyring. Currently, the test is done when the key is parsed, but given that at that point we can only sensibly refer to the contents of the system trusted keyring, we can only use that as the basis for working out the trustworthiness of a new key. With this change, a trusted keyring is a set of keys that once the trusted-only flag is set cannot be added to except by verification through one of the contained keys. Further, adding a key into a trusted keyring, whilst it might grant trustworthiness in the context of that keyring, does not automatically grant trustworthiness in the context of a second keyring to which it could be secondarily linked. To accomplish this, the authentication data associated with the key source must now be retained. For an X.509 cert, this means the contents of the AuthorityKeyIdentifier and the signature data. If system keyrings are disabled then restrict_link_by_builtin_trusted() resolves to restrict_link_reject(). The integrity digital signature code still works correctly with this as it was previously using KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there is no system keyring against which trust can be determined. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-06 16:14:26 +01:00
KEYS: Move the point of trust determination to __key_link() Move the point at which a key is determined to be trustworthy to __key_link() so that we use the contents of the keyring being linked in to to determine whether the key being linked in is trusted or not. What is 'trusted' then becomes a matter of what's in the keyring. Currently, the test is done when the key is parsed, but given that at that point we can only sensibly refer to the contents of the system trusted keyring, we can only use that as the basis for working out the trustworthiness of a new key. With this change, a trusted keyring is a set of keys that once the trusted-only flag is set cannot be added to except by verification through one of the contained keys. Further, adding a key into a trusted keyring, whilst it might grant trustworthiness in the context of that keyring, does not automatically grant trustworthiness in the context of a second keyring to which it could be secondarily linked. To accomplish this, the authentication data associated with the key source must now be retained. For an X.509 cert, this means the contents of the AuthorityKeyIdentifier and the signature data. If system keyrings are disabled then restrict_link_by_builtin_trusted() resolves to restrict_link_reject(). The integrity digital signature code still works correctly with this as it was previously using KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there is no system keyring against which trust can be determined. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-06 16:14:26 +01:00
KEYS: Move the point of trust determination to __key_link() Move the point at which a key is determined to be trustworthy to __key_link() so that we use the contents of the keyring being linked in to to determine whether the key being linked in is trusted or not. What is 'trusted' then becomes a matter of what's in the keyring. Currently, the test is done when the key is parsed, but given that at that point we can only sensibly refer to the contents of the system trusted keyring, we can only use that as the basis for working out the trustworthiness of a new key. With this change, a trusted keyring is a set of keys that once the trusted-only flag is set cannot be added to except by verification through one of the contained keys. Further, adding a key into a trusted keyring, whilst it might grant trustworthiness in the context of that keyring, does not automatically grant trustworthiness in the context of a second keyring to which it could be secondarily linked. To accomplish this, the authentication data associated with the key source must now be retained. For an X.509 cert, this means the contents of the AuthorityKeyIdentifier and the signature data. If system keyrings are disabled then restrict_link_by_builtin_trusted() resolves to restrict_link_reject(). The integrity digital signature code still works correctly with this as it was previously using KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there is no system keyring against which trust can be determined. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-06 16:14:26 +01:00
ima: digital signature verification using asymmetric keys Asymmetric keys were introduced in linux-3.7 to verify the signature on signed kernel modules. The asymmetric keys infrastructure abstracts the signature verification from the crypto details. This patch adds IMA/EVM signature verification using asymmetric keys. Support for additional signature verification methods can now be delegated to the asymmetric key infrastructure. Although the module signature header and the IMA/EVM signature header could use the same format, to minimize the signature length and save space in the extended attribute, this patch defines a new IMA/EVM header format. The main difference is that the key identifier is a sha1[12 - 19] hash of the key modulus and exponent, similar to the current implementation. The only purpose of the key identifier is to identify the corresponding key in the kernel keyring. ima-evm-utils was updated to support the new signature format. While asymmetric signature verification functionality supports many different hash algorithms, the hash used in this patch is calculated during the IMA collection phase, based on the configured algorithm. The default algorithm is sha1, but for backwards compatibility md5 is supported. Due to this current limitation, signatures should be generated using a sha1 hash algorithm. Changes in this patch: - Functionality has been moved to separate source file in order to get rid of in source #ifdefs. - keyid is derived according to the RFC 3280. It does not require to assign IMA/EVM specific "description" when loading X509 certificate. Kernel asymmetric key subsystem automatically generate the description. Also loading a certificate does not require using of ima-evm-utils and can be done using keyctl only. - keyid size is reduced to 32 bits to save xattr space. Key search is done using partial match functionality of asymmetric_key_match(). - Kconfig option title was changed Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-02-07 00:12:08 +02:00
ima: digital signature verification using asymmetric keys Asymmetric keys were introduced in linux-3.7 to verify the signature on signed kernel modules. The asymmetric keys infrastructure abstracts the signature verification from the crypto details. This patch adds IMA/EVM signature verification using asymmetric keys. Support for additional signature verification methods can now be delegated to the asymmetric key infrastructure. Although the module signature header and the IMA/EVM signature header could use the same format, to minimize the signature length and save space in the extended attribute, this patch defines a new IMA/EVM header format. The main difference is that the key identifier is a sha1[12 - 19] hash of the key modulus and exponent, similar to the current implementation. The only purpose of the key identifier is to identify the corresponding key in the kernel keyring. ima-evm-utils was updated to support the new signature format. While asymmetric signature verification functionality supports many different hash algorithms, the hash used in this patch is calculated during the IMA collection phase, based on the configured algorithm. The default algorithm is sha1, but for backwards compatibility md5 is supported. Due to this current limitation, signatures should be generated using a sha1 hash algorithm. Changes in this patch: - Functionality has been moved to separate source file in order to get rid of in source #ifdefs. - keyid is derived according to the RFC 3280. It does not require to assign IMA/EVM specific "description" when loading X509 certificate. Kernel asymmetric key subsystem automatically generate the description. Also loading a certificate does not require using of ima-evm-utils and can be done using keyctl only. - keyid size is reduced to 32 bits to save xattr space. Key search is done using partial match functionality of asymmetric_key_match(). - Kconfig option title was changed Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2013-02-07 00:12:08 +02:00