kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-14 05:55:17 +00:00
Code Issues Releases Packages Activity
linux/drivers/usb/core/generic.c

245 lines
6.9 KiB
Raw Normal View History

usbcore: move code among source files This revised patch (as713b) moves a few routines among source files in usbcore. Some driver-related code in usb.c (claiming interfaces and matching IDs) is moved to driver.c, where it belongs. Also the usb_generic stuff in driver.c is moved to a new source file: generic.c. (That's the reason for revising the patch.) Although not very big now, it will get bigger in a later patch. None of the code has been changed; it has only been re-arranged. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:08:06 -04:00
USB: make hcd.h public (drivers dependency) The usbcore headers: hcd.h and hub.h are shared between usbcore, HCDs and a couple of other drivers (e.g. USBIP modules). So, it makes sense to move them into a more public location and to cleanup dependency of those modules on kernel internal headers. This patch moves hcd.h from drivers/usb/core into include/linux/usb/ Signed-of-by: Eric Lescouet <eric@lescouet.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-24 23:21:52 +02:00
usbcore: move code among source files This revised patch (as713b) moves a few routines among source files in usbcore. Some driver-related code in usb.c (claiming interfaces and matching IDs) is moved to driver.c, where it belongs. Also the usb_generic stuff in driver.c is moved to a new source file: generic.c. (That's the reason for revising the patch.) Although not very big now, it will get bigger in a later patch. None of the code has been changed; it has only been re-arranged. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:08:06 -04:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
rndis_host learns ActiveSync basics Windows Mobile 5 based devices described as supporting "ActiveSync": - Speak RNDIS but lack the CDC and union descriptors. This patch updates the cdc ethernet code to fake ACM descriptors we need. - Require RNDIS_MSG_QUERY messages to include a buffer of the size the response should generate. This patch updates the rndis host code to pass this will-be-ignored data. The resulting RNDIS host code has been reported to work with several WM5 based devices. (Note that a fancier patch is available at synce.sf.net.) Some bugfixes, affecting not just ActiveSync: (a) when cleaning up after RNDS init fails, scrub the second interface just like cdc_ether does, so disconnect won't oops. (b) handle peripherals that use the pad-to-end-of-packet option; some devices can't talk to us if that option doesn't work. (c) when choosing configurations, don't forget about an RNDIS config just because the RNDIS driver is dynamically linked. Cleanup, streamlining, bugfixes, Kconfig, and matching hub driver update. Also for paranoia's sake, refuse to talk to something that looks like a real modem instead of RNDIS. Signed-off-by: Ole Andre Vadla Ravnaas <oleavr@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-14 16:01:28 -08:00
USB: rename choose_configuration As it is global, give it a usb specific name in the global namespace. Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-02 22:44:27 -06:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
rndis_host learns ActiveSync basics Windows Mobile 5 based devices described as supporting "ActiveSync": - Speak RNDIS but lack the CDC and union descriptors. This patch updates the cdc ethernet code to fake ACM descriptors we need. - Require RNDIS_MSG_QUERY messages to include a buffer of the size the response should generate. This patch updates the rndis host code to pass this will-be-ignored data. The resulting RNDIS host code has been reported to work with several WM5 based devices. (Note that a fancier patch is available at synce.sf.net.) Some bugfixes, affecting not just ActiveSync: (a) when cleaning up after RNDS init fails, scrub the second interface just like cdc_ether does, so disconnect won't oops. (b) handle peripherals that use the pad-to-end-of-packet option; some devices can't talk to us if that option doesn't work. (c) when choosing configurations, don't forget about an RNDIS config just because the RNDIS driver is dynamically linked. Cleanup, streamlining, bugfixes, Kconfig, and matching hub driver update. Also for paranoia's sake, refuse to talk to something that looks like a real modem instead of RNDIS. Signed-off-by: Ole Andre Vadla Ravnaas <oleavr@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-14 16:01:28 -08:00
USB: accept RNDIS configs if there's no alternative This patch (as1410) makes a slight change to the strategy used for choosing a default configuration. Currently we skip configs whose first interface is RNDIS, if the kernel wasn't built with the corresponding driver. This risks losing access to the other interfaces in those configs. In addition, if there is only one config then we will end up not configuring the device at all. This changes the logic; now such configurations will be skipped only if there is at least one other config. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Adam Kropelin <akropel1@rochester.rr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-27 11:28:42 -04:00
rndis_host learns ActiveSync basics Windows Mobile 5 based devices described as supporting "ActiveSync": - Speak RNDIS but lack the CDC and union descriptors. This patch updates the cdc ethernet code to fake ACM descriptors we need. - Require RNDIS_MSG_QUERY messages to include a buffer of the size the response should generate. This patch updates the rndis host code to pass this will-be-ignored data. The resulting RNDIS host code has been reported to work with several WM5 based devices. (Note that a fancier patch is available at synce.sf.net.) Some bugfixes, affecting not just ActiveSync: (a) when cleaning up after RNDS init fails, scrub the second interface just like cdc_ether does, so disconnect won't oops. (b) handle peripherals that use the pad-to-end-of-packet option; some devices can't talk to us if that option doesn't work. (c) when choosing configurations, don't forget about an RNDIS config just because the RNDIS driver is dynamically linked. Cleanup, streamlining, bugfixes, Kconfig, and matching hub driver update. Also for paranoia's sake, refuse to talk to something that looks like a real modem instead of RNDIS. Signed-off-by: Ole Andre Vadla Ravnaas <oleavr@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-14 16:01:28 -08:00
USB: accept RNDIS configs if there's no alternative This patch (as1410) makes a slight change to the strategy used for choosing a default configuration. Currently we skip configs whose first interface is RNDIS, if the kernel wasn't built with the corresponding driver. This risks losing access to the other interfaces in those configs. In addition, if there is only one config then we will end up not configuring the device at all. This changes the logic; now such configurations will be skipped only if there is at least one other config. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Adam Kropelin <akropel1@rochester.rr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-27 11:28:42 -04:00
rndis_host learns ActiveSync basics Windows Mobile 5 based devices described as supporting "ActiveSync": - Speak RNDIS but lack the CDC and union descriptors. This patch updates the cdc ethernet code to fake ACM descriptors we need. - Require RNDIS_MSG_QUERY messages to include a buffer of the size the response should generate. This patch updates the rndis host code to pass this will-be-ignored data. The resulting RNDIS host code has been reported to work with several WM5 based devices. (Note that a fancier patch is available at synce.sf.net.) Some bugfixes, affecting not just ActiveSync: (a) when cleaning up after RNDS init fails, scrub the second interface just like cdc_ether does, so disconnect won't oops. (b) handle peripherals that use the pad-to-end-of-packet option; some devices can't talk to us if that option doesn't work. (c) when choosing configurations, don't forget about an RNDIS config just because the RNDIS driver is dynamically linked. Cleanup, streamlining, bugfixes, Kconfig, and matching hub driver update. Also for paranoia's sake, refuse to talk to something that looks like a real modem instead of RNDIS. Signed-off-by: Ole Andre Vadla Ravnaas <oleavr@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-14 16:01:28 -08:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
USB: don't choose configs with no interfaces This patch (as1372) fixes a bug in the routine that chooses the default configuration to install when a new USB device is detected. The algorithm is supposed to look for a config whose first interface is for a non-vendor-specific class. But the way it's currently written, it will also accept a config with no interfaces at all, which is not very useful. (Believe it or not, such things do exist.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andrew Victor <avictor.za@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-20 10:40:59 -04:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
USB: Convert a dev_info to a dev_dbg Knowing which configuration was chosen is a debugging aid more than it is informational. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-24 16:18:27 -06:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
usbcore: add usb_device_driver definition This patch (as732) adds a usb_device_driver structure, for representing drivers that manage an entire USB device as opposed to just an interface. Support routines like usb_register_device_driver, usb_deregister_device_driver, usb_probe_device, and usb_unbind_device are also added. Unlike an earlier version of this patch, the new code is type-safe. To accomplish this, the existing struct driver embedded in struct usb_driver had to be wrapped in an intermediate wrapper. This enables the core to tell at runtime whether a particular struct driver belongs to a device driver or to an interface driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:08:49 -04:00
usbcore: move code among source files This revised patch (as713b) moves a few routines among source files in usbcore. Some driver-related code in usb.c (claiming interfaces and matching IDs) is moved to driver.c, where it belongs. Also the usb_generic stuff in driver.c is moved to a new source file: generic.c. (That's the reason for revising the patch.) Although not very big now, it will get bigger in a later patch. None of the code has been changed; it has only been re-arranged. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:08:06 -04:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
USB: add API for userspace drivers to "claim" ports This patch (as1258) implements a feature that users have been asking for: It gives programs the ability to "claim" a port on a hub, via a new usbfs ioctl. A device plugged into a "claimed" port will not be touched by the kernel beyond the immediate necessities of initialization and enumeration. In particular, when a device is plugged into a "claimed" port, the kernel will not select and install a configuration. And when a config is installed by usbfs or sysfs, the kernel will not probe any drivers for any of the interfaces. (However the kernel will fetch various string descriptors during enumeration. One could argue that this isn't really necessary, but the strings are exported in sysfs.) The patch does not guarantee exclusive access to these devices; it is still possible for more than one program to open the device file concurrently. Programs are responsible for coordinating access among themselves. A demonstration program showing how to use the new interface can be found in an attachment to http://marc.info/?l=linux-usb&m=124345857431452&w=2 The patch also makes a small simplification to the hub driver, replacing a bunch of more-or-less useless variants of "out of memory" with a single message. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-29 10:56:54 -04:00
usb: usb_generic_probe() obeys authorization If called and the device is not authorized to be used, then we won't choose a configuration (as they are not a concept that exists for an unauthorized device). However, the device is added to the system. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-31 20:34:04 -07:00
USB: rename choose_configuration As it is global, give it a usb specific name in the global namespace. Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-02 22:44:27 -06:00
usb: usb_generic_probe() obeys authorization If called and the device is not authorized to be used, then we won't choose a configuration (as they are not a concept that exists for an unauthorized device). However, the device is added to the system. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-31 20:34:04 -07:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
usb: usb_generic_probe() obeys authorization If called and the device is not authorized to be used, then we won't choose a configuration (as they are not a concept that exists for an unauthorized device). However, the device is added to the system. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-31 20:34:04 -07:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
usbcore: move code among source files This revised patch (as713b) moves a few routines among source files in usbcore. Some driver-related code in usb.c (claiming interfaces and matching IDs) is moved to driver.c, where it belongs. Also the usb_generic stuff in driver.c is moved to a new source file: generic.c. (That's the reason for revising the patch.) Although not very big now, it will get bigger in a later patch. None of the code has been changed; it has only been re-arranged. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:08:06 -04:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
usbcore: add usb_device_driver definition This patch (as732) adds a usb_device_driver structure, for representing drivers that manage an entire USB device as opposed to just an interface. Support routines like usb_register_device_driver, usb_deregister_device_driver, usb_probe_device, and usb_unbind_device are also added. Unlike an earlier version of this patch, the new code is type-safe. To accomplish this, the existing struct driver embedded in struct usb_driver had to be wrapped in an intermediate wrapper. This enables the core to tell at runtime whether a particular struct driver belongs to a device driver or to an interface driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:08:49 -04:00
usbcore: move code among source files This revised patch (as713b) moves a few routines among source files in usbcore. Some driver-related code in usb.c (claiming interfaces and matching IDs) is moved to driver.c, where it belongs. Also the usb_generic stuff in driver.c is moved to a new source file: generic.c. (That's the reason for revising the patch.) Although not very big now, it will get bigger in a later patch. None of the code has been changed; it has only been re-arranged. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:08:06 -04:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
usbcore: move code among source files This revised patch (as713b) moves a few routines among source files in usbcore. Some driver-related code in usb.c (claiming interfaces and matching IDs) is moved to driver.c, where it belongs. Also the usb_generic stuff in driver.c is moved to a new source file: generic.c. (That's the reason for revising the patch.) Although not very big now, it will get bigger in a later patch. None of the code has been changed; it has only been re-arranged. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:08:06 -04:00
usbcore: non-hub-specific uses of autosuspend This patch (as741) makes the non-hub parts of usbcore actually use the autosuspend facilities added by an earlier patch. Devices opened through usbfs are autoresumed and then autosuspended upon close. Likewise for usb-skeleton. Devices are autoresumed for usb_set_configuration. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 15:47:18 -04:00
USB: unconfigure devices which have config 0 Some USB devices do have a configuration 0, in contravention of the USB spec. Normally 0 is supposed to indicate that a device is unconfigured. While we can't change what the device is doing, we can change usbcore. This patch (as852) allows usb_set_configuration() to accept a config value of -1 as indicating that the device should be unconfigured. The request actually sent to the device will still contain 0 as the value. But even if the device does have a configuration 0, dev->actconfig will be set to NULL and dev->state will be set to USB_STATE_ADDRESS. Without some sort of special-case handling like this, there is no way to unconfigure these non-compliant devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-08 16:40:43 -05:00
usbcore: move code among source files This revised patch (as713b) moves a few routines among source files in usbcore. Some driver-related code in usb.c (claiming interfaces and matching IDs) is moved to driver.c, where it belongs. Also the usb_generic stuff in driver.c is moved to a new source file: generic.c. (That's the reason for revising the patch.) Although not very big now, it will get bigger in a later patch. None of the code has been changed; it has only been re-arranged. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:08:06 -04:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
USB: move bus_suspend and bus_resume method calls This patch (as885) moves the root-hub bus_suspend() and bus_resume() method calls from the hub driver's suspend and resume methods into the usb_generic driver methods, where they make just as much sense. Their old locations were not fully correct. For example, in a kernel compiled without CONFIG_USB_SUSPEND, if one were to do: echo -n 1-0:1.0 >/sys/bus/usb/drivers/hub/unbind to unbind the hub driver from a root hub, there would then be no way to suspend that root hub. Attempts to put the system to sleep would fail; the USB controller driver would refuse to suspend because the root hub was still active. The patch also makes a very slight change in the way devices with no driver are handled during suspend. Rather than doing a standard USB port-suspend directly, now the suspend routine in usb_generic is called. In practice this should never affect anyone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-04 11:51:54 -04:00
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-30 15:34:36 -04:00
USB: move bus_suspend and bus_resume method calls This patch (as885) moves the root-hub bus_suspend() and bus_resume() method calls from the hub driver's suspend and resume methods into the usb_generic driver methods, where they make just as much sense. Their old locations were not fully correct. For example, in a kernel compiled without CONFIG_USB_SUSPEND, if one were to do: echo -n 1-0:1.0 >/sys/bus/usb/drivers/hub/unbind to unbind the hub driver from a root hub, there would then be no way to suspend that root hub. Attempts to put the system to sleep would fail; the USB controller driver would refuse to suspend because the root hub was still active. The patch also makes a very slight change in the way devices with no driver are handled during suspend. Rather than doing a standard USB port-suspend directly, now the suspend routine in usb_generic is called. In practice this should never affect anyone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-04 11:51:54 -04:00
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-30 15:34:36 -04:00
USB: Enhance usage of pm_message_t This patch (as1177) modifies the USB core suspend and resume routines. The resume functions now will take a pm_message_t argument, so they will know what sort of resume is occurring. The new argument is also passed to the port suspend/resume and bus suspend/resume routines (although they don't use it for anything but debugging). In addition, special pm_message_t values are used for user-initiated, device-initiated (i.e., remote wakeup), and automatic suspend/resume. By testing these values, drivers can tell whether or not a particular suspend was an autosuspend. Unfortunately, they can't do the same for resumes -- not until the pm_message_t argument is also passed to the drivers' resume methods. That will require a bigger change. IMO, the whole Power Management framework should have been set up this way in the first place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-25 16:39:18 -05:00
USB: move decision to ignore FREEZE events This patch (as987) changes the way FREEZE and PRETHAW suspend events are handled in usbcore. The decision about whether or not to ignore them for non-root devices is pushed down into the USB-device driver, instead of being made in the core code. This is appropriate, since devices exported to a virtualized guest or over a network may indeed need to handle these types of suspend, even though normal devices don't. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-10 11:31:43 -04:00
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-30 15:34:36 -04:00
USB: Enhance usage of pm_message_t This patch (as1177) modifies the USB core suspend and resume routines. The resume functions now will take a pm_message_t argument, so they will know what sort of resume is occurring. The new argument is also passed to the port suspend/resume and bus suspend/resume routines (although they don't use it for anything but debugging). In addition, special pm_message_t values are used for user-initiated, device-initiated (i.e., remote wakeup), and automatic suspend/resume. By testing these values, drivers can tell whether or not a particular suspend was an autosuspend. Unfortunately, they can't do the same for resumes -- not until the pm_message_t argument is also passed to the drivers' resume methods. That will require a bigger change. IMO, the whole Power Management framework should have been set up this way in the first place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-25 16:39:18 -05:00
USB: move decision to ignore FREEZE events This patch (as987) changes the way FREEZE and PRETHAW suspend events are handled in usbcore. The decision about whether or not to ignore them for non-root devices is pushed down into the USB-device driver, instead of being made in the core code. This is appropriate, since devices exported to a virtualized guest or over a network may indeed need to handle these types of suspend, even though normal devices don't. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-10 11:31:43 -04:00
USB: move bus_suspend and bus_resume method calls This patch (as885) moves the root-hub bus_suspend() and bus_resume() method calls from the hub driver's suspend and resume methods into the usb_generic driver methods, where they make just as much sense. Their old locations were not fully correct. For example, in a kernel compiled without CONFIG_USB_SUSPEND, if one were to do: echo -n 1-0:1.0 >/sys/bus/usb/drivers/hub/unbind to unbind the hub driver from a root hub, there would then be no way to suspend that root hub. Attempts to put the system to sleep would fail; the USB controller driver would refuse to suspend because the root hub was still active. The patch also makes a very slight change in the way devices with no driver are handled during suspend. Rather than doing a standard USB port-suspend directly, now the suspend routine in usb_generic is called. In practice this should never affect anyone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-04 11:51:54 -04:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
USB: Enhance usage of pm_message_t This patch (as1177) modifies the USB core suspend and resume routines. The resume functions now will take a pm_message_t argument, so they will know what sort of resume is occurring. The new argument is also passed to the port suspend/resume and bus suspend/resume routines (although they don't use it for anything but debugging). In addition, special pm_message_t values are used for user-initiated, device-initiated (i.e., remote wakeup), and automatic suspend/resume. By testing these values, drivers can tell whether or not a particular suspend was an autosuspend. Unfortunately, they can't do the same for resumes -- not until the pm_message_t argument is also passed to the drivers' resume methods. That will require a bigger change. IMO, the whole Power Management framework should have been set up this way in the first place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-25 16:39:18 -05:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
USB: move bus_suspend and bus_resume method calls This patch (as885) moves the root-hub bus_suspend() and bus_resume() method calls from the hub driver's suspend and resume methods into the usb_generic driver methods, where they make just as much sense. Their old locations were not fully correct. For example, in a kernel compiled without CONFIG_USB_SUSPEND, if one were to do: echo -n 1-0:1.0 >/sys/bus/usb/drivers/hub/unbind to unbind the hub driver from a root hub, there would then be no way to suspend that root hub. Attempts to put the system to sleep would fail; the USB controller driver would refuse to suspend because the root hub was still active. The patch also makes a very slight change in the way devices with no driver are handled during suspend. Rather than doing a standard USB port-suspend directly, now the suspend routine in usb_generic is called. In practice this should never affect anyone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-04 11:51:54 -04:00
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-30 15:34:36 -04:00
USB: Enhance usage of pm_message_t This patch (as1177) modifies the USB core suspend and resume routines. The resume functions now will take a pm_message_t argument, so they will know what sort of resume is occurring. The new argument is also passed to the port suspend/resume and bus suspend/resume routines (although they don't use it for anything but debugging). In addition, special pm_message_t values are used for user-initiated, device-initiated (i.e., remote wakeup), and automatic suspend/resume. By testing these values, drivers can tell whether or not a particular suspend was an autosuspend. Unfortunately, they can't do the same for resumes -- not until the pm_message_t argument is also passed to the drivers' resume methods. That will require a bigger change. IMO, the whole Power Management framework should have been set up this way in the first place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-25 16:39:18 -05:00
USB: add USB-Persist facility This patch (as886) adds the controversial USB-persist facility, allowing USB devices to persist across a power loss during system suspend. The facility is controlled by a new Kconfig option (with appropriate warnings about the potential dangers); when the option is off the behavior will remain the same as it is now. But when the option is on, people will be able to use suspend-to-disk and keep their USB filesystems intact -- something particularly valuable for small machines where the root filesystem is on a USB device! Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-04 11:52:20 -04:00
USB: Enhance usage of pm_message_t This patch (as1177) modifies the USB core suspend and resume routines. The resume functions now will take a pm_message_t argument, so they will know what sort of resume is occurring. The new argument is also passed to the port suspend/resume and bus suspend/resume routines (although they don't use it for anything but debugging). In addition, special pm_message_t values are used for user-initiated, device-initiated (i.e., remote wakeup), and automatic suspend/resume. By testing these values, drivers can tell whether or not a particular suspend was an autosuspend. Unfortunately, they can't do the same for resumes -- not until the pm_message_t argument is also passed to the drivers' resume methods. That will require a bigger change. IMO, the whole Power Management framework should have been set up this way in the first place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-25 16:39:18 -05:00
USB: move bus_suspend and bus_resume method calls This patch (as885) moves the root-hub bus_suspend() and bus_resume() method calls from the hub driver's suspend and resume methods into the usb_generic driver methods, where they make just as much sense. Their old locations were not fully correct. For example, in a kernel compiled without CONFIG_USB_SUSPEND, if one were to do: echo -n 1-0:1.0 >/sys/bus/usb/drivers/hub/unbind to unbind the hub driver from a root hub, there would then be no way to suspend that root hub. Attempts to put the system to sleep would fail; the USB controller driver would refuse to suspend because the root hub was still active. The patch also makes a very slight change in the way devices with no driver are handled during suspend. Rather than doing a standard USB port-suspend directly, now the suspend routine in usb_generic is called. In practice this should never affect anyone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-04 11:51:54 -04:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
usbcore: add usb_device_driver definition This patch (as732) adds a usb_device_driver structure, for representing drivers that manage an entire USB device as opposed to just an interface. Support routines like usb_register_device_driver, usb_deregister_device_driver, usb_probe_device, and usb_unbind_device are also added. Unlike an earlier version of this patch, the new code is type-safe. To accomplish this, the existing struct driver embedded in struct usb_driver had to be wrapped in an intermediate wrapper. This enables the core to tell at runtime whether a particular struct driver belongs to a device driver or to an interface driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:08:49 -04:00
usbcore: move code among source files This revised patch (as713b) moves a few routines among source files in usbcore. Some driver-related code in usb.c (claiming interfaces and matching IDs) is moved to driver.c, where it belongs. Also the usb_generic stuff in driver.c is moved to a new source file: generic.c. (That's the reason for revising the patch.) Although not very big now, it will get bigger in a later patch. None of the code has been changed; it has only been re-arranged. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:08:06 -04:00
usbcore: add usb_device_driver definition This patch (as732) adds a usb_device_driver structure, for representing drivers that manage an entire USB device as opposed to just an interface. Support routines like usb_register_device_driver, usb_deregister_device_driver, usb_probe_device, and usb_unbind_device are also added. Unlike an earlier version of this patch, the new code is type-safe. To accomplish this, the existing struct driver embedded in struct usb_driver had to be wrapped in an intermediate wrapper. This enables the core to tell at runtime whether a particular struct driver belongs to a device driver or to an interface driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:08:49 -04:00
usbcore: make usb_generic a usb_device_driver This patch (as714b) makes usb_generic into a usb_device_driver capable of being probed and unbound, just like other drivers. A fair amount of the work that used to get done during discovery or removal of a USB device have been moved to the probe and disconnect methods of usb_generic: creating the sysfs attributes and selecting an initial configuration. However the normal behavior should continue to be the same as before. We will now have the possibility of creating other USB device drivers, They will assist with exporting devices to remote systems (USB-over-TCPIP) or to paravirtual guest operating systems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:09:35 -04:00
usbcore: non-hub-specific uses of autosuspend This patch (as741) makes the non-hub parts of usbcore actually use the autosuspend facilities added by an earlier patch. Devices opened through usbfs are autoresumed and then autosuspended upon close. Likewise for usb-skeleton. Devices are autoresumed for usb_set_configuration. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 15:47:18 -04:00
usbcore: move code among source files This revised patch (as713b) moves a few routines among source files in usbcore. Some driver-related code in usb.c (claiming interfaces and matching IDs) is moved to driver.c, where it belongs. Also the usb_generic stuff in driver.c is moved to a new source file: generic.c. (That's the reason for revising the patch.) Although not very big now, it will get bigger in a later patch. None of the code has been changed; it has only been re-arranged. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-01 22:08:06 -04:00