linux/arch/x86/Kconfig

2899 lines
93 KiB

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
x86: simplify "make ARCH=x86" and fix kconfig all.config Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in all.config. For a fix the diffstat is nice: 6 files changed, 3 insertions(+), 36 deletions(-) The patch reverts these commits: - 0f855aa64b3f63d35a891510cf7db932a435c116 ("kconfig: add helper to set config symbol from environment variable") - 2a113281f5cd2febbab21a93c8943f8d3eece4d3 ("kconfig: use $K64BIT to set 64BIT with all*config targets") Roman Zippel pointed out that kconfig supported string compares so the additional complexity introduced by the above two patches were not needed. With this patch we have following behaviour: # make {allno,allyes,allmod,rand}config [ARCH=...] option \ host arch | 32bit | 64bit ===================================================== ./. | 32bit | 64bit ARCH=x86 | 32bit | 32bit ARCH=i386 | 32bit | 32bit ARCH=x86_64 | 64bit | 64bit The general rule are that ARCH= and native architecture takes precedence over the configuration. So make ARCH=i386 [whatever] will always build a 32-bit kernel no matter what the configuration says. The configuration will be updated to 32-bit if it was configured to 64-bit and the other way around. This behaviour is consistent with previous behaviour so no suprises here. make ARCH=x86 will per default result in a 32-bit kernel but as the only ARCH= value x86 allow the user to select between 32-bit and 64-bit using menuconfig. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andreas Herrmann <aherrman@arcor.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-17 15:37:31 +01:00
x86: Default to ARCH=x86 to avoid overriding CONFIG_64BIT It is easy to waste a bunch of time when one takes a 32-bit .config from a test machine and try to build it on a faster 64-bit system, and its existing setting of CONFIG_64BIT=n gets *changed* to match the build host. Similarly, if one has an existing build tree it is easy to trash an entire build tree that way. This is because the default setting for $ARCH when discovered from 'uname' is one of the legacy pre-x86-merge values (i386 or x86_64), which effectively force the setting of CONFIG_64BIT to match. We should default to ARCH=x86 instead, finally completing the merge that we started so long ago. This patch preserves the behaviour of the legacy ARCH settings for commands such as: make ARCH=x86_64 randconfig make ARCH=i386 randconfig ... since making the value of CONFIG_64BIT actually random in that situation is not desirable. In time, perhaps we can retire this legacy use of the old ARCH= values. We already have a way to override values for *any* config option, using $KCONFIG_ALLCONFIG, so it could be argued that we don't necessarily need to keep ARCH={i386,x86_64} around as a special case just for overriding CONFIG_64BIT. We'd probably at least want to add a way to override config options from the command line ('make CONFIG_FOO=y oldconfig') before we talk about doing that though. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Link: http://lkml.kernel.org/r/1356040315.3198.51.camel@shinybook.infradead.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-12-20 21:51:55 +00:00
include/linux/string.h: add the option of fortified string.h functions This adds support for compiling with a rough equivalent to the glibc _FORTIFY_SOURCE=1 feature, providing compile-time and runtime buffer overflow checks for string.h functions when the compiler determines the size of the source or destination buffer at compile-time. Unlike glibc, it covers buffer reads in addition to writes. GNU C __builtin_*_chk intrinsics are avoided because they would force a much more complex implementation. They aren't designed to detect read overflows and offer no real benefit when using an implementation based on inline checks. Inline checks don't add up to much code size and allow full use of the regular string intrinsics while avoiding the need for a bunch of _chk functions and per-arch assembly to avoid wrapper overhead. This detects various overflows at compile-time in various drivers and some non-x86 core kernel code. There will likely be issues caught in regular use at runtime too. Future improvements left out of initial implementation for simplicity, as it's all quite optional and can be done incrementally: * Some of the fortified string functions (strncpy, strcat), don't yet place a limit on reads from the source based on __builtin_object_size of the source buffer. * Extending coverage to more string functions like strlcat. * It should be possible to optionally use __builtin_object_size(x, 1) for some functions (C strings) to detect intra-object overflows (like glibc's _FORTIFY_SOURCE=2), but for now this takes the conservative approach to avoid likely compatibility issues. * The compile-time checks should be made available via a separate config option which can be enabled by default (or always enabled) once enough time has passed to get the issues it catches fixed. Kees said: "This is great to have. While it was out-of-tree code, it would have blocked at least CVE-2016-3858 from being exploitable (improper size argument to strlcpy()). I've sent a number of fixes for out-of-bounds-reads that this detected upstream already" [arnd@arndb.de: x86: fix fortified memcpy] Link: http://lkml.kernel.org/r/20170627150047.660360-1-arnd@arndb.de [keescook@chromium.org: avoid panic() in favor of BUG()] Link: http://lkml.kernel.org/r/20170626235122.GA25261@beast [keescook@chromium.org: move from -mm, add ARCH_HAS_FORTIFY_SOURCE, tweak Kconfig help] Link: http://lkml.kernel.org/r/20170526095404.20439-1-danielmicay@gmail.com Link: http://lkml.kernel.org/r/1497903987-21002-8-git-send-email-keescook@chromium.org Signed-off-by: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Daniel Axtens <dja@axtens.net> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 14:36:10 -07:00
kernel: add kcov code coverage kcov provides code coverage collection for coverage-guided fuzzing (randomized testing). Coverage-guided fuzzing is a testing technique that uses coverage feedback to determine new interesting inputs to a system. A notable user-space example is AFL (http://lcamtuf.coredump.cx/afl/). However, this technique is not widely used for kernel testing due to missing compiler and kernel support. kcov does not aim to collect as much coverage as possible. It aims to collect more or less stable coverage that is function of syscall inputs. To achieve this goal it does not collect coverage in soft/hard interrupts and instrumentation of some inherently non-deterministic or non-interesting parts of kernel is disbled (e.g. scheduler, locking). Currently there is a single coverage collection mode (tracing), but the API anticipates additional collection modes. Initially I also implemented a second mode which exposes coverage in a fixed-size hash table of counters (what Quentin used in his original patch). I've dropped the second mode for simplicity. This patch adds the necessary support on kernel side. The complimentary compiler support was added in gcc revision 231296. We've used this support to build syzkaller system call fuzzer, which has found 90 kernel bugs in just 2 months: https://github.com/google/syzkaller/wiki/Found-Bugs We've also found 30+ bugs in our internal systems with syzkaller. Another (yet unexplored) direction where kcov coverage would greatly help is more traditional "blob mutation". For example, mounting a random blob as a filesystem, or receiving a random blob over wire. Why not gcov. Typical fuzzing loop looks as follows: (1) reset coverage, (2) execute a bit of code, (3) collect coverage, repeat. A typical coverage can be just a dozen of basic blocks (e.g. an invalid input). In such context gcov becomes prohibitively expensive as reset/collect coverage steps depend on total number of basic blocks/edges in program (in case of kernel it is about 2M). Cost of kcov depends only on number of executed basic blocks/edges. On top of that, kernel requires per-thread coverage because there are always background threads and unrelated processes that also produce coverage. With inlined gcov instrumentation per-thread coverage is not possible. kcov exposes kernel PCs and control flow to user-space which is insecure. But debugfs should not be mapped as user accessible. Based on a patch by Quentin Casasnovas. [akpm@linux-foundation.org: make task_struct.kcov_mode have type `enum kcov_mode'] [akpm@linux-foundation.org: unbreak allmodconfig] [akpm@linux-foundation.org: follow x86 Makefile layout standards] Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: syzkaller <syzkaller@googlegroups.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Tavis Ormandy <taviso@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Kees Cook <keescook@google.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: David Drysdale <drysdale@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 14:27:30 -07:00
x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations The pmem driver has a need to transfer data with a persistent memory destination and be able to rely on the fact that the destination writes are not cached. It is sufficient for the writes to be flushed to a cpu-store-buffer (non-temporal / "movnt" in x86 terms), as we expect userspace to call fsync() to ensure data-writes have reached a power-fail-safe zone in the platform. The fsync() triggers a REQ_FUA or REQ_FLUSH to the pmem driver which will turn around and fence previous writes with an "sfence". Implement a __copy_from_user_inatomic_flushcache, memcpy_page_flushcache, and memcpy_flushcache, that guarantee that the destination buffer is not dirty in the cpu cache on completion. The new copy_from_iter_flushcache and sub-routines will be used to replace the "pmem api" (include/linux/pmem.h + arch/x86/include/asm/pmem.h). The availability of copy_from_iter_flushcache() and memcpy_flushcache() are gated by the CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE config symbol, and fallback to copy_from_iter_nocache() and plain memcpy() otherwise. This is meant to satisfy the concern from Linus that if a driver wants to do something beyond the normal nocache semantics it should be something private to that driver [1], and Al's concern that anything uaccess related belongs with the rest of the uaccess code [2]. The first consumer of this interface is a new 'copy_from_iter' dax operation so that pmem can inject cache maintenance operations without imposing this overhead on other dax-capable drivers. [1]: https://lists.01.org/pipermail/linux-nvdimm/2017-January/008364.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2017-April/009942.html Cc: <x86@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-05-29 12:22:50 -07:00
UBSAN: run-time undefined behavior sanity checker UBSAN uses compile-time instrumentation to catch undefined behavior (UB). Compiler inserts code that perform certain kinds of checks before operations that could cause UB. If check fails (i.e. UB detected) __ubsan_handle_* function called to print error message. So the most of the work is done by compiler. This patch just implements ubsan handlers printing errors. GCC has this capability since 4.9.x [1] (see -fsanitize=undefined option and its suboptions). However GCC 5.x has more checkers implemented [2]. Article [3] has a bit more details about UBSAN in the GCC. [1] - https://gcc.gnu.org/onlinedocs/gcc-4.9.0/gcc/Debugging-Options.html [2] - https://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html [3] - http://developerblog.redhat.com/2014/10/16/gcc-undefined-behavior-sanitizer-ubsan/ Issues which UBSAN has found thus far are: Found bugs: * out-of-bounds access - 97840cb67ff5 ("netfilter: nfnetlink: fix insufficient validation in nfnetlink_bind") undefined shifts: * d48458d4a768 ("jbd2: use a better hash function for the revoke table") * 10632008b9e1 ("clockevents: Prevent shift out of bounds") * 'x << -1' shift in ext4 - http://lkml.kernel.org/r/<5444EF21.8020501@samsung.com> * undefined rol32(0) - http://lkml.kernel.org/r/<1449198241-20654-1-git-send-email-sasha.levin@oracle.com> * undefined dirty_ratelimit calculation - http://lkml.kernel.org/r/<566594E2.3050306@odin.com> * undefined roundown_pow_of_two(0) - http://lkml.kernel.org/r/<1449156616-11474-1-git-send-email-sasha.levin@oracle.com> * [WONTFIX] undefined shift in __bpf_prog_run - http://lkml.kernel.org/r/<CACT4Y+ZxoR3UjLgcNdUm4fECLMx2VdtfrENMtRRCdgHB2n0bJA@mail.gmail.com> WONTFIX here because it should be fixed in bpf program, not in kernel. signed overflows: * 32a8df4e0b33f ("sched: Fix odd values in effective_load() calculations") * mul overflow in ntp - http://lkml.kernel.org/r/<1449175608-1146-1-git-send-email-sasha.levin@oracle.com> * incorrect conversion into rtc_time in rtc_time64_to_tm() - http://lkml.kernel.org/r/<1449187944-11730-1-git-send-email-sasha.levin@oracle.com> * unvalidated timespec in io_getevents() - http://lkml.kernel.org/r/<CACT4Y+bBxVYLQ6LtOKrKtnLthqLHcw-BMp3aqP3mjdAvr9FULQ@mail.gmail.com> * [NOTABUG] signed overflow in ktime_add_safe() - http://lkml.kernel.org/r/<CACT4Y+aJ4muRnWxsUe1CMnA6P8nooO33kwG-c8YZg=0Xc8rJqw@mail.gmail.com> [akpm@linux-foundation.org: fix unused local warning] [akpm@linux-foundation.org: fix __int128 build woes] Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michal Marek <mmarek@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yury Gribov <y.gribov@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 15:00:55 -08:00
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 15:37:18 -07:00
EDAC changes, v2: * New APM X-Gene SoC EDAC driver (Loc Ho) * AMD error injection module improvements (Aravind Gopalakrishnan) * Altera Arria 10 support (Thor Thayer) * misc fixes and cleanups all over the place -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJViuInAAoJEBLB8Bhh3lVKHT8QAKkHIMreO8obo09haxNJlfdF BaG7SNEDhvcgQ1B76RsjnjkUpsivvUt+mCYMP+BxcAqFrTA33UZCCOK5tEhGb1wr matRdR6+aezqAl2e/0/Ti25bWOkDxcOeazh2TyezuyIXtaJjOq1oZC7OaYGmxPun NlZY+/uY1eiHlewKsK04y8G8J5i4wGoKnuxBvOyELT90+a+fLfAOshAp0D4r0piB Znv0ydsHlu+Wx57slg1DktlsyswmcGS9WfWwwTlELOLulKgN8wEAVYzUB5pJzNbz ehq0J4wYz95juXADC4M4tEjErHVJNl6PbyMqwt0+XUUJ1NSgOj7Q6iqwxDoZX8km oxiLVydQBtoIzF1LojFKAVZDFnrMKHKwK3RaDaUJjTI90+tVzEU8xsBlUf6+EgD2 Ss2RH8Gfuf52RdtwHh9++T1ur5rM9YNCAm31msq06mcOf0bEtmDbhZ+fVC5mjhqB fIb3hxnk0r2BVg+ZCN/boxGS6RzUtYVcCXaBPDMeHcg9BEEds70KCFEcsX7TvJIg 5/SHI+033MylqkX2zrgDQLj7CQk3R0jaotHVbdhLupyOldcM7r5uF+VO84drNWGN GfM2lpyE/swZWnzKuotgYIGR1XvFjtJAVAyNGIvwP+ajjTsqXzEnLSLClY5LWfYd nSSSMpCCqsEmhoWftOix =Id4f -----END PGP SIGNATURE----- Merge tag 'edac_for_4.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC updates from Borislav Petkov: - New APM X-Gene SoC EDAC driver (Loc Ho) - AMD error injection module improvements (Aravind Gopalakrishnan) - Altera Arria 10 support (Thor Thayer) - misc fixes and cleanups all over the place * tag 'edac_for_4.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (28 commits) EDAC: Update Documentation/edac.txt EDAC: Fix typos in Documentation/edac.txt EDAC, mce_amd_inj: Set MISCV on injection EDAC, mce_amd_inj: Move bit preparations before the injection EDAC, mce_amd_inj: Cleanup and simplify README EDAC, altera: Do not allow suspend when EDAC is enabled EDAC, mce_amd_inj: Make inj_type static arm: socfpga: dts: Add Arria10 SDRAM EDAC DTS support EDAC, altera: Add Arria10 EDAC support EDAC, altera: Refactor for Altera CycloneV SoC EDAC, altera: Generalize driver to use DT Memory size EDAC, mce_amd_inj: Add README file EDAC, mce_amd_inj: Add individual permissions field to dfs_node EDAC, mce_amd_inj: Modify flags attribute to use string arguments EDAC, mce_amd_inj: Read out number of MCE banks from the hardware EDAC, mce_amd_inj: Use MCE_INJECT_GET macro for bank node too EDAC, xgene: Fix cpuid abuse EDAC, mpc85xx: Extend error address to 64 bit EDAC, mpc8xxx: Adapt for FSL SoC EDAC, edac_stub: Drop arch-specific include ...
2015-06-24 19:52:06 -07:00
kernel/watchdog: Prevent false positives with turbo modes The hardlockup detector on x86 uses a performance counter based on unhalted CPU cycles and a periodic hrtimer. The hrtimer period is about 2/5 of the performance counter period, so the hrtimer should fire 2-3 times before the performance counter NMI fires. The NMI code checks whether the hrtimer fired since the last invocation. If not, it assumess a hard lockup. The calculation of those periods is based on the nominal CPU frequency. Turbo modes increase the CPU clock frequency and therefore shorten the period of the perf/NMI watchdog. With extreme Turbo-modes (3x nominal frequency) the perf/NMI period is shorter than the hrtimer period which leads to false positives. A simple fix would be to shorten the hrtimer period, but that comes with the side effect of more frequent hrtimer and softlockup thread wakeups, which is not desired. Implement a low pass filter, which checks the perf/NMI period against kernel time. If the perf/NMI fires before 4/5 of the watchdog period has elapsed then the event is ignored and postponed to the next perf/NMI. That solves the problem and avoids the overhead of shorter hrtimer periods and more frequent softlockup thread wakeups. Fixes: 58687acba592 ("lockup_detector: Combine nmi_watchdog and softlockup detector") Reported-and-tested-by: Kan Liang <Kan.liang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: dzickus@redhat.com Cc: prarit@redhat.com Cc: ak@linux.intel.com Cc: babu.moger@oracle.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: acme@redhat.com Cc: stable@vger.kernel.org Cc: atomlin@redhat.com Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1708150931310.1886@nanos
2017-08-15 09:50:13 +02:00
x86/mm/kasan: don't use vmemmap_populate() to initialize shadow The kasan shadow is currently mapped using vmemmap_populate() since that provides a semi-convenient way to map pages into init_top_pgt. However, since that no longer zeroes the mapped pages, it is not suitable for kasan, which requires zeroed shadow memory. Add kasan_populate_shadow() interface and use it instead of vmemmap_populate(). Besides, this allows us to take advantage of gigantic pages and use them to populate the shadow, which should save us some memory wasted on page tables and reduce TLB pressure. Link: http://lkml.kernel.org/r/20171103185147.2688-2-pasha.tatashin@oracle.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Bob Picco <bob.picco@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 17:36:35 -08:00
x86: mm: support ARCH_MMAP_RND_BITS x86: arch_mmap_rnd() uses hard-coded values, 8 for 32-bit and 28 for 64-bit, to generate the random offset for the mmap base address. This value represents a compromise between increased ASLR effectiveness and avoiding address-space fragmentation. Replace it with a Kconfig option, which is sensibly bounded, so that platform developers may choose where to place this compromise. Keep default values as new minimums. Signed-off-by: Daniel Cashman <dcashman@google.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Rientjes <rientjes@google.com> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Nick Kralevich <nnk@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Borislav Petkov <bp@suse.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 15:20:06 -08:00
x86/mm: Introduce mmap_compat_base() for 32-bit mmap() mmap() uses a base address, from which it starts to look for a free space for allocation. The base address is stored in mm->mmap_base, which is calculated during exec(). The address depends on task's size, set rlimit for stack, ASLR randomization. The base depends on the task size and the number of random bits which are different for 64-bit and 32bit applications. Due to the fact, that the base address is fixed, its mmap() from a compat (32bit) syscall issued by a 64bit task will return a address which is based on the 64bit base address and does not fit into the 32bit address space (4GB). The returned pointer is truncated to 32bit, which results in an invalid address. To solve store a seperate compat address base plus a compat legacy address base in mm_struct. These bases are calculated at exec() time and can be used later to address the 32bit compat mmap() issued by 64 bit applications. As a consequence of this change 32-bit applications issuing a 64-bit syscall (after doing a long jump) will get a 64-bit mapping now. Before this change 32-bit applications always got a 32bit mapping. [ tglx: Massaged changelog and added a comment ] Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-06 17:17:19 +03:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
x86/mm/64: Enable vmapped stacks (CONFIG_HAVE_ARCH_VMAP_STACK=y) This allows x86_64 kernels to enable vmapped stacks by setting HAVE_ARCH_VMAP_STACK=y - which enables the CONFIG_VMAP_STACK=y high level Kconfig option. There are a couple of interesting bits: First, x86 lazily faults in top-level paging entries for the vmalloc area. This won't work if we get a page fault while trying to access the stack: the CPU will promote it to a double-fault and we'll die. To avoid this problem, probe the new stack when switching stacks and forcibly populate the pgd entry for the stack when switching mms. Second, once we have guard pages around the stack, we'll want to detect and handle stack overflow. I didn't enable it on x86_32. We'd need to rework the double-fault code a bit and I'm concerned about running out of vmalloc virtual addresses under some workloads. This patch, by itself, will behave somewhat erratically when the stack overflows while RSP is still more than a few tens of bytes above the bottom of the stack. Specifically, we'll get #PF and make it to no_context and them oops without reliably triggering a double-fault, and no_context doesn't know about stack overflows. The next patch will improve that case. Thank you to Nadav and Brian for helping me pay enough attention to the SDM to hopefully get this right. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/c88f3e2920b18e6cc621d772a04a62c06869037e.1470907718.git.luto@kernel.org [ Minor edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-11 02:35:23 -07:00
x86: enable DMA CMA with swiotlb The DMA Contiguous Memory Allocator support on x86 is disabled when swiotlb config option is enabled. So DMA CMA is always disabled on x86_64 because swiotlb is always enabled. This attempts to support for DMA CMA with enabling swiotlb config option. The contiguous memory allocator on x86 is integrated in the function dma_generic_alloc_coherent() which is .alloc callback in nommu_dma_ops for dma_alloc_coherent(). x86_swiotlb_alloc_coherent() which is .alloc callback in swiotlb_dma_ops tries to allocate with dma_generic_alloc_coherent() firstly and then swiotlb_alloc_coherent() is called as a fallback. The main part of supporting DMA CMA with swiotlb is that changing x86_swiotlb_free_coherent() which is .free callback in swiotlb_dma_ops for dma_free_coherent() so that it can distinguish memory allocated by dma_generic_alloc_coherent() from one allocated by swiotlb_alloc_coherent() and release it with dma_generic_free_coherent() which can handle contiguous memory. This change requires making is_swiotlb_buffer() global function. This also needs to change .free callback in the dma_map_ops for amd_gart and sta2x11, because these dma_ops are also using dma_generic_alloc_coherent(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:06:50 -07:00
exit_thread: remove empty bodies Define HAVE_EXIT_THREAD for archs which want to do something in exit_thread. For others, let's define exit_thread as an empty inline. This is a cleanup before we change the prototype of exit_thread to accept a task parameter. [akpm@linux-foundation.org: fix mips] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:00:16 -07:00
GCC plugin infrastructure This patch allows to build the whole kernel with GCC plugins. It was ported from grsecurity/PaX. The infrastructure supports building out-of-tree modules and building in a separate directory. Cross-compilation is supported too. Currently the x86, arm, arm64 and uml architectures enable plugins. The directory of the gcc plugins is scripts/gcc-plugins. You can use a file or a directory there. The plugins compile with these options: * -fno-rtti: gcc is compiled with this option so the plugins must use it too * -fno-exceptions: this is inherited from gcc too * -fasynchronous-unwind-tables: this is inherited from gcc too * -ggdb: it is useful for debugging a plugin (better backtrace on internal errors) * -Wno-narrowing: to suppress warnings from gcc headers (ipa-utils.h) * -Wno-unused-variable: to suppress warnings from gcc headers (gcc_version variable, plugin-version.h) The infrastructure introduces a new Makefile target called gcc-plugins. It supports all gcc versions from 4.5 to 6.0. The scripts/gcc-plugin.sh script chooses the proper host compiler (gcc-4.7 can be built by either gcc or g++). This script also checks the availability of the included headers in scripts/gcc-plugins/gcc-common.h. The gcc-common.h header contains frequently included headers for GCC plugins and it has a compatibility layer for the supported gcc versions. The gcc-generate-*-pass.h headers automatically generate the registration structures for GIMPLE, SIMPLE_IPA, IPA and RTL passes. Note that 'make clean' keeps the *.so files (only the distclean or mrproper targets clean all) because they are needed for out-of-tree modules. Based on work created by the PaX Team. Signed-off-by: Emese Revfy <re.emese@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-05-24 00:09:38 +02:00
printk/nmi: generic solution for safe printk in NMI printk() takes some locks and could not be used a safe way in NMI context. The chance of a deadlock is real especially when printing stacks from all CPUs. This particular problem has been addressed on x86 by the commit a9edc8809328 ("x86/nmi: Perform a safe NMI stack trace on all CPUs"). The patchset brings two big advantages. First, it makes the NMI backtraces safe on all architectures for free. Second, it makes all NMI messages almost safe on all architectures (the temporary buffer is limited. We still should keep the number of messages in NMI context at minimum). Note that there already are several messages printed in NMI context: WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE handlers. These are not easy to avoid. This patch reuses most of the code and makes it generic. It is useful for all messages and architectures that support NMI. The alternative printk_func is set when entering and is reseted when leaving NMI context. It queues IRQ work to copy the messages into the main ring buffer in a safe context. __printk_nmi_flush() copies all available messages and reset the buffer. Then we could use a simple cmpxchg operations to get synchronized with writers. There is also used a spinlock to get synchronized with other flushers. We do not longer use seq_buf because it depends on external lock. It would be hard to make all supported operations safe for a lockless use. It would be confusing and error prone to make only some operations safe. The code is put into separate printk/nmi.c as suggested by Steven Rostedt. It needs a per-CPU buffer and is compiled only on architectures that call nmi_enter(). This is achieved by the new HAVE_NMI Kconfig flag. The are MN10300 and Xtensa architectures. We need to clean up NMI handling there first. Let's do it separately. The patch is heavily based on the draft from Peter Zijlstra, see https://lkml.org/lkml/2015/6/10/327 [arnd@arndb.de: printk-nmi: use %zu format string for size_t] [akpm@linux-foundation.org: min_t->min - all types are size_t here] Signed-off-by: Petr Mladek <pmladek@suse.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> [arm part] Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jiri Kosina <jkosina@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: David Miller <davem@davemloft.net> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:00:33 -07:00
perf: Unified API to record selective sets of arch registers This brings a new API to help the selective dump of registers on event sampling, and its implementation for x86 arch. Added HAVE_PERF_REGS config option to determine if the architecture provides perf registers ABI. The information about desired registers will be passed in u64 mask. It's up to the architecture to map the registers into the mask bits. For the x86 arch implementation, both 32 and 64 bit registers bits are defined within single enum to ensure 64 bit system can provide register dump for compat task if needed in the future. Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com> [ Added missing linux/errno.h include ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-07 15:20:36 +02:00
2012-08-07 15:20:40 +02:00
x86/mm: Enable RCU based page table freeing (CONFIG_HAVE_RCU_TABLE_FREE=y) There's a subtle bug in how some of the paravirt guest code handles page table freeing on x86: On x86 software page table walkers depend on the fact that remote TLB flush does an IPI: walk is performed lockless but with interrupts disabled and in case the page table is freed the freeing CPU will get blocked as remote TLB flush is required. On other architectures which don't require an IPI to do remote TLB flush we have an RCU-based mechanism (see include/asm-generic/tlb.h for more details). In virtualized environments we may want to override the ->flush_tlb_others callback in pv_mmu_ops and use a hypercall asking the hypervisor to do a remote TLB flush for us. This breaks the assumption about IPIs. Xen PV has been doing this for years and the upcoming remote TLB flush for Hyper-V will do it too. This is not safe, as software page table walkers may step on an already freed page. Fix the bug by enabling the RCU-based page table freeing mechanism, CONFIG_HAVE_RCU_TABLE_FREE=y. Testing with kernbench and mmap/munmap microbenchmarks, and neither showed any noticeable performance impact. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Juergen Gross <jgross@suse.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: KY Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20170828082251.5562-1-vkuznets@redhat.com [ Rewrote/fixed/clarified the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-28 10:22:51 +02:00
x86: mm: support ARCH_MMAP_RND_BITS x86: arch_mmap_rnd() uses hard-coded values, 8 for 32-bit and 28 for 64-bit, to generate the random offset for the mmap base address. This value represents a compromise between increased ASLR effectiveness and avoiding address-space fragmentation. Replace it with a Kconfig option, which is sensibly bounded, so that platform developers may choose where to place this compromise. Keep default values as new minimums. Signed-off-by: Daniel Cashman <dcashman@google.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Rientjes <rientjes@google.com> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Nick Kralevich <nnk@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Borislav Petkov <bp@suse.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 15:20:06 -08:00
2015-04-17 15:04:48 -04:00
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 14:56:42 +05:30
container freezer: implement freezer cgroup subsystem This patch implements a new freezer subsystem in the control groups framework. It provides a way to stop and resume execution of all tasks in a cgroup by writing in the cgroup filesystem. The freezer subsystem in the container filesystem defines a file named freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the cgroup. Subsequently writing "RUNNING" will unfreeze the tasks in the cgroup. Reading will return the current state. * Examples of usage : # mkdir /containers/freezer # mount -t cgroup -ofreezer freezer /containers # mkdir /containers/0 # echo $some_pid > /containers/0/tasks to get status of the freezer subsystem : # cat /containers/0/freezer.state RUNNING to freeze all tasks in the container : # echo FROZEN > /containers/0/freezer.state # cat /containers/0/freezer.state FREEZING # cat /containers/0/freezer.state FROZEN to unfreeze all tasks in the container : # echo RUNNING > /containers/0/freezer.state # cat /containers/0/freezer.state RUNNING This is the basic mechanism which should do the right thing for user space task in a simple scenario. It's important to note that freezing can be incomplete. In that case we return EBUSY. This means that some tasks in the cgroup are busy doing something that prevents us from completely freezing the cgroup at this time. After EBUSY, the cgroup will remain partially frozen -- reflected by freezer.state reporting "FREEZING" when read. The state will remain "FREEZING" until one of these things happens: 1) Userspace cancels the freezing operation by writing "RUNNING" to the freezer.state file 2) Userspace retries the freezing operation by writing "FROZEN" to the freezer.state file (writing "FREEZING" is not legal and returns EIO) 3) The tasks that blocked the cgroup from entering the "FROZEN" state disappear from the cgroup's set of tasks. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: export thaw_process] Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Matt Helsley <matthltc@us.ibm.com> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Tested-by: Matt Helsley <matthltc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-18 20:27:21 -07:00
x86: Fix performance regression caused by paravirt_ops on native kernels Xiaohui Xin and some other folks at Intel have been looking into what's behind the performance hit of paravirt_ops when running native. It appears that the hit is entirely due to the paravirtualized spinlocks introduced by: | commit 8efcbab674de2bee45a2e4cdf97de16b8e609ac8 | Date: Mon Jul 7 12:07:51 2008 -0700 | | paravirt: introduce a "lock-byte" spinlock implementation The extra call/return in the spinlock path is somehow causing an increase in the cycles/instruction of somewhere around 2-7% (seems to vary quite a lot from test to test). The working theory is that the CPU's pipeline is getting upset about the call->call->locked-op->return->return, and seems to be failing to speculate (though I haven't seen anything definitive about the precise reasons). This doesn't entirely make sense, because the performance hit is also visible on unlock and other operations which don't involve locked instructions. But spinlock operations clearly swamp all the other pvops operations, even though I can't imagine that they're nearly as common (there's only a .05% increase in instructions executed). If I disable just the pv-spinlock calls, my tests show that pvops is identical to non-pvops performance on native (my measurements show that it is actually about .1% faster, but Xiaohui shows a .05% slowdown). Summary of results, averaging 10 runs of the "mmperf" test, using a no-pvops build as baseline: nopv Pv-nospin Pv-spin CPU cycles 100.00% 99.89% 102.18% instructions 100.00% 100.10% 100.15% CPI 100.00% 99.79% 102.03% cache ref 100.00% 100.84% 100.28% cache miss 100.00% 90.47% 88.56% cache miss rate 100.00% 89.72% 88.31% branches 100.00% 99.93% 100.04% branch miss 100.00% 103.66% 107.72% branch miss rt 100.00% 103.73% 107.67% wallclock 100.00% 99.90% 102.20% The clear effect here is that the 2% increase in CPI is directly reflected in the final wallclock time. (The other interesting effect is that the more ops are out of line calls via pvops, the lower the cache access and miss rates. Not too surprising, but it suggests that the non-pvops kernel is over-inlined. On the flipside, the branch misses go up correspondingly...) So, what's the fix? Paravirt patching turns all the pvops calls into direct calls, so _spin_lock etc do end up having direct calls. For example, the compiler generated code for paravirtualized _spin_lock is: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq *0xffffffff805a5b30 <_spin_lock+22>: retq The indirect call will get patched to: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq <__ticket_spin_lock> <_spin_lock+20>: nop; nop /* or whatever 2-byte nop */ <_spin_lock+22>: retq One possibility is to inline _spin_lock, etc, when building an optimised kernel (ie, when there's no spinlock/preempt instrumentation/debugging enabled). That will remove the outer call/return pair, returning the instruction stream to a single call/return, which will presumably execute the same as the non-pvops case. The downsides arel 1) it will replicate the preempt_disable/enable code at eack lock/unlock callsite; this code is fairly small, but not nothing; and 2) the spinlock definitions are already a very heavily tangled mass of #ifdefs and other preprocessor magic, and making any changes will be non-trivial. The other obvious answer is to disable pv-spinlocks. Making them a separate config option is fairly easy, and it would be trivial to enable them only when Xen is enabled (as the only non-default user). But it doesn't really address the common case of a distro build which is going to have Xen support enabled, and leaves the open question of whether the native performance cost of pv-spinlocks is worth the performance improvement on a loaded Xen system (10% saving of overall system CPU when guests block rather than spin). Still it is a reasonable short-term workaround. [ Impact: fix pvops performance regression when running native ] Analysed-by: "Xin Xiaohui" <xiaohui.xin@intel.com> Analysed-by: "Li Xin" <xin.li@intel.com> Analysed-by: "Nakajima Jun" <jun.nakajima@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Xen-devel <xen-devel@lists.xensource.com> LKML-Reference: <4A0B62F7.5030802@goop.org> [ fixed the help text ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-13 17:16:55 -07:00
x86: Fix performance regression caused by paravirt_ops on native kernels Xiaohui Xin and some other folks at Intel have been looking into what's behind the performance hit of paravirt_ops when running native. It appears that the hit is entirely due to the paravirtualized spinlocks introduced by: | commit 8efcbab674de2bee45a2e4cdf97de16b8e609ac8 | Date: Mon Jul 7 12:07:51 2008 -0700 | | paravirt: introduce a "lock-byte" spinlock implementation The extra call/return in the spinlock path is somehow causing an increase in the cycles/instruction of somewhere around 2-7% (seems to vary quite a lot from test to test). The working theory is that the CPU's pipeline is getting upset about the call->call->locked-op->return->return, and seems to be failing to speculate (though I haven't seen anything definitive about the precise reasons). This doesn't entirely make sense, because the performance hit is also visible on unlock and other operations which don't involve locked instructions. But spinlock operations clearly swamp all the other pvops operations, even though I can't imagine that they're nearly as common (there's only a .05% increase in instructions executed). If I disable just the pv-spinlock calls, my tests show that pvops is identical to non-pvops performance on native (my measurements show that it is actually about .1% faster, but Xiaohui shows a .05% slowdown). Summary of results, averaging 10 runs of the "mmperf" test, using a no-pvops build as baseline: nopv Pv-nospin Pv-spin CPU cycles 100.00% 99.89% 102.18% instructions 100.00% 100.10% 100.15% CPI 100.00% 99.79% 102.03% cache ref 100.00% 100.84% 100.28% cache miss 100.00% 90.47% 88.56% cache miss rate 100.00% 89.72% 88.31% branches 100.00% 99.93% 100.04% branch miss 100.00% 103.66% 107.72% branch miss rt 100.00% 103.73% 107.67% wallclock 100.00% 99.90% 102.20% The clear effect here is that the 2% increase in CPI is directly reflected in the final wallclock time. (The other interesting effect is that the more ops are out of line calls via pvops, the lower the cache access and miss rates. Not too surprising, but it suggests that the non-pvops kernel is over-inlined. On the flipside, the branch misses go up correspondingly...) So, what's the fix? Paravirt patching turns all the pvops calls into direct calls, so _spin_lock etc do end up having direct calls. For example, the compiler generated code for paravirtualized _spin_lock is: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq *0xffffffff805a5b30 <_spin_lock+22>: retq The indirect call will get patched to: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq <__ticket_spin_lock> <_spin_lock+20>: nop; nop /* or whatever 2-byte nop */ <_spin_lock+22>: retq One possibility is to inline _spin_lock, etc, when building an optimised kernel (ie, when there's no spinlock/preempt instrumentation/debugging enabled). That will remove the outer call/return pair, returning the instruction stream to a single call/return, which will presumably execute the same as the non-pvops case. The downsides arel 1) it will replicate the preempt_disable/enable code at eack lock/unlock callsite; this code is fairly small, but not nothing; and 2) the spinlock definitions are already a very heavily tangled mass of #ifdefs and other preprocessor magic, and making any changes will be non-trivial. The other obvious answer is to disable pv-spinlocks. Making them a separate config option is fairly easy, and it would be trivial to enable them only when Xen is enabled (as the only non-default user). But it doesn't really address the common case of a distro build which is going to have Xen support enabled, and leaves the open question of whether the native performance cost of pv-spinlocks is worth the performance improvement on a loaded Xen system (10% saving of overall system CPU when guests block rather than spin). Still it is a reasonable short-term workaround. [ Impact: fix pvops performance regression when running native ] Analysed-by: "Xin Xiaohui" <xiaohui.xin@intel.com> Analysed-by: "Li Xin" <xin.li@intel.com> Analysed-by: "Nakajima Jun" <jun.nakajima@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Xen-devel <xen-devel@lists.xensource.com> LKML-Reference: <4A0B62F7.5030802@goop.org> [ fixed the help text ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-13 17:16:55 -07:00
x86: Fix performance regression caused by paravirt_ops on native kernels Xiaohui Xin and some other folks at Intel have been looking into what's behind the performance hit of paravirt_ops when running native. It appears that the hit is entirely due to the paravirtualized spinlocks introduced by: | commit 8efcbab674de2bee45a2e4cdf97de16b8e609ac8 | Date: Mon Jul 7 12:07:51 2008 -0700 | | paravirt: introduce a "lock-byte" spinlock implementation The extra call/return in the spinlock path is somehow causing an increase in the cycles/instruction of somewhere around 2-7% (seems to vary quite a lot from test to test). The working theory is that the CPU's pipeline is getting upset about the call->call->locked-op->return->return, and seems to be failing to speculate (though I haven't seen anything definitive about the precise reasons). This doesn't entirely make sense, because the performance hit is also visible on unlock and other operations which don't involve locked instructions. But spinlock operations clearly swamp all the other pvops operations, even though I can't imagine that they're nearly as common (there's only a .05% increase in instructions executed). If I disable just the pv-spinlock calls, my tests show that pvops is identical to non-pvops performance on native (my measurements show that it is actually about .1% faster, but Xiaohui shows a .05% slowdown). Summary of results, averaging 10 runs of the "mmperf" test, using a no-pvops build as baseline: nopv Pv-nospin Pv-spin CPU cycles 100.00% 99.89% 102.18% instructions 100.00% 100.10% 100.15% CPI 100.00% 99.79% 102.03% cache ref 100.00% 100.84% 100.28% cache miss 100.00% 90.47% 88.56% cache miss rate 100.00% 89.72% 88.31% branches 100.00% 99.93% 100.04% branch miss 100.00% 103.66% 107.72% branch miss rt 100.00% 103.73% 107.67% wallclock 100.00% 99.90% 102.20% The clear effect here is that the 2% increase in CPI is directly reflected in the final wallclock time. (The other interesting effect is that the more ops are out of line calls via pvops, the lower the cache access and miss rates. Not too surprising, but it suggests that the non-pvops kernel is over-inlined. On the flipside, the branch misses go up correspondingly...) So, what's the fix? Paravirt patching turns all the pvops calls into direct calls, so _spin_lock etc do end up having direct calls. For example, the compiler generated code for paravirtualized _spin_lock is: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq *0xffffffff805a5b30 <_spin_lock+22>: retq The indirect call will get patched to: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq <__ticket_spin_lock> <_spin_lock+20>: nop; nop /* or whatever 2-byte nop */ <_spin_lock+22>: retq One possibility is to inline _spin_lock, etc, when building an optimised kernel (ie, when there's no spinlock/preempt instrumentation/debugging enabled). That will remove the outer call/return pair, returning the instruction stream to a single call/return, which will presumably execute the same as the non-pvops case. The downsides arel 1) it will replicate the preempt_disable/enable code at eack lock/unlock callsite; this code is fairly small, but not nothing; and 2) the spinlock definitions are already a very heavily tangled mass of #ifdefs and other preprocessor magic, and making any changes will be non-trivial. The other obvious answer is to disable pv-spinlocks. Making them a separate config option is fairly easy, and it would be trivial to enable them only when Xen is enabled (as the only non-default user). But it doesn't really address the common case of a distro build which is going to have Xen support enabled, and leaves the open question of whether the native performance cost of pv-spinlocks is worth the performance improvement on a loaded Xen system (10% saving of overall system CPU when guests block rather than spin). Still it is a reasonable short-term workaround. [ Impact: fix pvops performance regression when running native ] Analysed-by: "Xin Xiaohui" <xiaohui.xin@intel.com> Analysed-by: "Li Xin" <xin.li@intel.com> Analysed-by: "Nakajima Jun" <jun.nakajima@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Xen-devel <xen-devel@lists.xensource.com> LKML-Reference: <4A0B62F7.5030802@goop.org> [ fixed the help text ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-13 17:16:55 -07:00
x86: Fix performance regression caused by paravirt_ops on native kernels Xiaohui Xin and some other folks at Intel have been looking into what's behind the performance hit of paravirt_ops when running native. It appears that the hit is entirely due to the paravirtualized spinlocks introduced by: | commit 8efcbab674de2bee45a2e4cdf97de16b8e609ac8 | Date: Mon Jul 7 12:07:51 2008 -0700 | | paravirt: introduce a "lock-byte" spinlock implementation The extra call/return in the spinlock path is somehow causing an increase in the cycles/instruction of somewhere around 2-7% (seems to vary quite a lot from test to test). The working theory is that the CPU's pipeline is getting upset about the call->call->locked-op->return->return, and seems to be failing to speculate (though I haven't seen anything definitive about the precise reasons). This doesn't entirely make sense, because the performance hit is also visible on unlock and other operations which don't involve locked instructions. But spinlock operations clearly swamp all the other pvops operations, even though I can't imagine that they're nearly as common (there's only a .05% increase in instructions executed). If I disable just the pv-spinlock calls, my tests show that pvops is identical to non-pvops performance on native (my measurements show that it is actually about .1% faster, but Xiaohui shows a .05% slowdown). Summary of results, averaging 10 runs of the "mmperf" test, using a no-pvops build as baseline: nopv Pv-nospin Pv-spin CPU cycles 100.00% 99.89% 102.18% instructions 100.00% 100.10% 100.15% CPI 100.00% 99.79% 102.03% cache ref 100.00% 100.84% 100.28% cache miss 100.00% 90.47% 88.56% cache miss rate 100.00% 89.72% 88.31% branches 100.00% 99.93% 100.04% branch miss 100.00% 103.66% 107.72% branch miss rt 100.00% 103.73% 107.67% wallclock 100.00% 99.90% 102.20% The clear effect here is that the 2% increase in CPI is directly reflected in the final wallclock time. (The other interesting effect is that the more ops are out of line calls via pvops, the lower the cache access and miss rates. Not too surprising, but it suggests that the non-pvops kernel is over-inlined. On the flipside, the branch misses go up correspondingly...) So, what's the fix? Paravirt patching turns all the pvops calls into direct calls, so _spin_lock etc do end up having direct calls. For example, the compiler generated code for paravirtualized _spin_lock is: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq *0xffffffff805a5b30 <_spin_lock+22>: retq The indirect call will get patched to: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq <__ticket_spin_lock> <_spin_lock+20>: nop; nop /* or whatever 2-byte nop */ <_spin_lock+22>: retq One possibility is to inline _spin_lock, etc, when building an optimised kernel (ie, when there's no spinlock/preempt instrumentation/debugging enabled). That will remove the outer call/return pair, returning the instruction stream to a single call/return, which will presumably execute the same as the non-pvops case. The downsides arel 1) it will replicate the preempt_disable/enable code at eack lock/unlock callsite; this code is fairly small, but not nothing; and 2) the spinlock definitions are already a very heavily tangled mass of #ifdefs and other preprocessor magic, and making any changes will be non-trivial. The other obvious answer is to disable pv-spinlocks. Making them a separate config option is fairly easy, and it would be trivial to enable them only when Xen is enabled (as the only non-default user). But it doesn't really address the common case of a distro build which is going to have Xen support enabled, and leaves the open question of whether the native performance cost of pv-spinlocks is worth the performance improvement on a loaded Xen system (10% saving of overall system CPU when guests block rather than spin). Still it is a reasonable short-term workaround. [ Impact: fix pvops performance regression when running native ] Analysed-by: "Xin Xiaohui" <xiaohui.xin@intel.com> Analysed-by: "Li Xin" <xin.li@intel.com> Analysed-by: "Nakajima Jun" <jun.nakajima@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Xen-devel <xen-devel@lists.xensource.com> LKML-Reference: <4A0B62F7.5030802@goop.org> [ fixed the help text ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-13 17:16:55 -07:00
locking/pvqspinlock: Collect slowpath lock statistics This patch enables the accumulation of kicking and waiting related PV qspinlock statistics when the new QUEUED_LOCK_STAT configuration option is selected. It also enables the collection of data which enable us to calculate the kicking and wakeup latencies which have a heavy dependency on the CPUs being used. The statistical counters are per-cpu variables to minimize the performance overhead in their updates. These counters are exported via the debugfs filesystem under the qlockstat directory. When the corresponding debugfs files are read, summation and computing of the required data are then performed. The measured latencies for different CPUs are: CPU Wakeup Kicking --- ------ ------- Haswell-EX 63.6us 7.4us Westmere-EX 67.6us 9.3us The measured latencies varied a bit from run-to-run. The wakeup latency is much higher than the kicking latency. A sample of statistical counters after system bootup (with vCPU overcommit) was: pv_hash_hops=1.00 pv_kick_unlock=1148 pv_kick_wake=1146 pv_latency_kick=11040 pv_latency_wake=194840 pv_spurious_wakeup=7 pv_wait_again=4 pv_wait_head=23 pv_wait_node=1129 Signed-off-by: Waiman Long <Waiman.Long@hpe.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Douglas Hatch <doug.hatch@hpe.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Scott J Norton <scott.norton@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1447114167-47185-6-git-send-email-Waiman.Long@hpe.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-09 19:09:25 -05:00
locking/pvqspinlock: Collect slowpath lock statistics This patch enables the accumulation of kicking and waiting related PV qspinlock statistics when the new QUEUED_LOCK_STAT configuration option is selected. It also enables the collection of data which enable us to calculate the kicking and wakeup latencies which have a heavy dependency on the CPUs being used. The statistical counters are per-cpu variables to minimize the performance overhead in their updates. These counters are exported via the debugfs filesystem under the qlockstat directory. When the corresponding debugfs files are read, summation and computing of the required data are then performed. The measured latencies for different CPUs are: CPU Wakeup Kicking --- ------ ------- Haswell-EX 63.6us 7.4us Westmere-EX 67.6us 9.3us The measured latencies varied a bit from run-to-run. The wakeup latency is much higher than the kicking latency. A sample of statistical counters after system bootup (with vCPU overcommit) was: pv_hash_hops=1.00 pv_kick_unlock=1148 pv_kick_wake=1146 pv_latency_kick=11040 pv_latency_wake=194840 pv_spurious_wakeup=7 pv_wait_again=4 pv_wait_head=23 pv_wait_node=1129 Signed-off-by: Waiman Long <Waiman.Long@hpe.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Douglas Hatch <doug.hatch@hpe.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Scott J Norton <scott.norton@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1447114167-47185-6-git-send-email-Waiman.Long@hpe.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-09 19:09:25 -05:00
x86: Enable Intel Turbo Boost Max Technology 3.0 On platforms supporting Intel Turbo Boost Max Technology 3.0, the maximum turbo frequencies of some cores in a CPU package may be higher than for the other cores in the same package. In that case, better performance (and possibly lower energy consumption as well) can be achieved by making the scheduler prefer to run tasks on the CPUs with higher max turbo frequencies. To that end, set up a core priority metric to abstract the core preferences based on the maximum turbo frequency. In that metric, the cores with higher maximum turbo frequencies are higher-priority than the other cores in the same package and that causes the scheduler to favor them when making load-balancing decisions using the asymmertic packing approach. At the same time, the priority of SMT threads with a higher CPU number is reduced so as to avoid scheduling tasks on all of the threads that belong to a favored core before all of the other cores have been given a task to run. The priority metric will be initialized by the P-state driver with the help of the sched_set_itmt_core_prio() function. The P-state driver will also determine whether or not ITMT is supported by the platform and will call sched_set_itmt_support() to indicate that. Co-developed-by: Peter Zijlstra (Intel) <peterz@infradead.org> Co-developed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: linux-pm@vger.kernel.org Cc: peterz@infradead.org Cc: jolsa@redhat.com Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: bp@suse.de Link: http://lkml.kernel.org/r/cd401ccdff88f88c8349314febdc25d51f7c48f7.1479844244.git.tim.c.chen@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-22 12:23:55 -08:00
x86: Enable Intel Turbo Boost Max Technology 3.0 On platforms supporting Intel Turbo Boost Max Technology 3.0, the maximum turbo frequencies of some cores in a CPU package may be higher than for the other cores in the same package. In that case, better performance (and possibly lower energy consumption as well) can be achieved by making the scheduler prefer to run tasks on the CPUs with higher max turbo frequencies. To that end, set up a core priority metric to abstract the core preferences based on the maximum turbo frequency. In that metric, the cores with higher maximum turbo frequencies are higher-priority than the other cores in the same package and that causes the scheduler to favor them when making load-balancing decisions using the asymmertic packing approach. At the same time, the priority of SMT threads with a higher CPU number is reduced so as to avoid scheduling tasks on all of the threads that belong to a favored core before all of the other cores have been given a task to run. The priority metric will be initialized by the P-state driver with the help of the sched_set_itmt_core_prio() function. The P-state driver will also determine whether or not ITMT is supported by the platform and will call sched_set_itmt_support() to indicate that. Co-developed-by: Peter Zijlstra (Intel) <peterz@infradead.org> Co-developed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: linux-pm@vger.kernel.org Cc: peterz@infradead.org Cc: jolsa@redhat.com Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: bp@suse.de Link: http://lkml.kernel.org/r/cd401ccdff88f88c8349314febdc25d51f7c48f7.1479844244.git.tim.c.chen@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-22 12:23:55 -08:00
x86, build, pci: Fix PCI_MSI build on !SMP Commit ebd97be635 ('PCI: remove ARCH_SUPPORTS_MSI kconfig option') removed the ARCH_SUPPORTS_MSI option which architectures could select to indicate that they support MSI. Now, all architectures are supposed to build fine when MSI support is enabled: instead of having the architecture tell *when* MSI support can be used, it's up to the architecture code to ensure that MSI support can be enabled. On x86, commit ebd97be635 removed the following line: select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) Which meant that MSI support was only available when the local APIC and I/O APIC were enabled. While this is always true on SMP or x86-64, it is not necessarily the case on i386 !SMP. The below patch makes sure that the local APIC and I/O APIC support is always enabled when MSI support is enabled. To do so, it: * Ensures the X86_UP_APIC option is not visible when PCI_MSI is enabled. This is the option that allows, on UP machines, to enable or not the APIC support. It is already not visible on SMP systems, or x86-64 systems, for example. We're simply also making it invisible on i386 MSI systems. * Ensures that the X86_LOCAL_APIC and X86_IO_APIC options are 'y' when PCI_MSI is enabled. Notice that this change requires a change in drivers/iommu/Kconfig to avoid a recursive Kconfig dependencey. The AMD_IOMMU option selects PCI_MSI, but was depending on X86_IO_APIC. This dependency is no longer needed: as soon as PCI_MSI is selected, the presence of X86_IO_APIC is guaranteed. Moreover, the AMD_IOMMU already depended on X86_64, which already guaranteed that X86_IO_APIC was enabled, so this dependency was anyway redundant. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: http://lkml.kernel.org/r/1380794354-9079-1-git-send-email-thomas.petazzoni@free-electrons.com Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-10-03 11:59:14 +02:00
x86, mce: use 64bit machine check code on 32bit The 64bit machine check code is in many ways much better than the 32bit machine check code: it is more specification compliant, is cleaner, only has a single code base versus one per CPU, has better infrastructure for recovery, has a cleaner way to communicate with user space etc. etc. Use the 64bit code for 32bit too. This is the second attempt to do this. There was one a couple of years ago to unify this code for 32bit and 64bit. Back then this ran into some trouble with K7s and was reverted. I believe this time the K7 problems (and some others) are addressed. I went over the old handlers and was very careful to retain all quirks. But of course this needs a lot of testing on old systems. On newer 64bit capable systems I don't expect much problems because they have been already tested with the 64bit kernel. I made this a CONFIG for now that still allows to select the old machine check code. This is mostly to make testing easier, if someone runs into a problem we can ask them to try with the CONFIG switched. The new code is default y for more coverage. Once there is confidence the 64bit code works well on older hardware too the CONFIG_X86_OLD_MCE and the associated code can be easily removed. This causes a behaviour change for 32bit installations. They now have to install the mcelog package to be able to log corrected machine checks. The 64bit machine check code only handles CPUs which support the standard Intel machine check architecture described in the IA32 SDM. The 32bit code has special support for some older CPUs which have non standard machine check architectures, in particular WinChip C3 and Intel P5. I made those a separate CONFIG option and kept them for now. The WinChip variant could be probably removed without too much pain, it doesn't really do anything interesting. P5 is also disabled by default (like it was before) because many motherboards have it miswired, but according to Alan Cox a few embedded setups use that one. Forward ported/heavily changed version of old patch, original patch included review/fixes from Thomas Gleixner, Bert Wesarg. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-28 19:07:31 +02:00
x86/mce/AMD: Add system physical address translation for AMD Fam17h The Unified Memory Controllers (UMCs) on Fam17h log a normalized address in their MCA_ADDR registers. We need to convert that normalized address to a system physical address in order to support a few facilities: 1) To offline poisoned pages in DRAM proactively in the deferred error handler. 2) To print sysaddr and page info for DRAM ECC errors in EDAC. [ Boris: fixes/cleanups ontop: * hi_addr_offset = 0 - no need for that branch. Stick it all under the HiAddrOffsetEn case. It confines hi_addr_offset's declaration too. * Move variables to the innermost scope they're used at so that we save on stack and not blow it up immediately on function entry. * Do not modify *sys_addr prematurely - we want to not exit early and have modified *sys_addr some, which callers get to see. We either convert to a sys_addr or we don't do anything. And we signal that with the retval of the function. * Rename label out -> out_err - because it is the error path. * No need to pr_err of the conversion failed case: imagine a sparsely-populated machine with UMCs which don't have DIMMs. Callers should look at the retval instead and issue a printk only when really necessary. No need for useless info in dmesg. * s/temp_reg/tmp/ and other variable names shortening => shorter code. * Use BIT() everywhere. * Make error messages more informative. * Small build fix for the !CONFIG_X86_MCE_AMD case. * ... and more minor cleanups. ] Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20161122111133.mjzpvzhf7o7yl2oa@pd.tnic [ Typo fixes. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-17 17:57:27 -05:00
x86, mce: use 64bit machine check code on 32bit The 64bit machine check code is in many ways much better than the 32bit machine check code: it is more specification compliant, is cleaner, only has a single code base versus one per CPU, has better infrastructure for recovery, has a cleaner way to communicate with user space etc. etc. Use the 64bit code for 32bit too. This is the second attempt to do this. There was one a couple of years ago to unify this code for 32bit and 64bit. Back then this ran into some trouble with K7s and was reverted. I believe this time the K7 problems (and some others) are addressed. I went over the old handlers and was very careful to retain all quirks. But of course this needs a lot of testing on old systems. On newer 64bit capable systems I don't expect much problems because they have been already tested with the 64bit kernel. I made this a CONFIG for now that still allows to select the old machine check code. This is mostly to make testing easier, if someone runs into a problem we can ask them to try with the CONFIG switched. The new code is default y for more coverage. Once there is confidence the 64bit code works well on older hardware too the CONFIG_X86_OLD_MCE and the associated code can be easily removed. This causes a behaviour change for 32bit installations. They now have to install the mcelog package to be able to log corrected machine checks. The 64bit machine check code only handles CPUs which support the standard Intel machine check architecture described in the IA32 SDM. The 32bit code has special support for some older CPUs which have non standard machine check architectures, in particular WinChip C3 and Intel P5. I made those a separate CONFIG option and kept them for now. The WinChip variant could be probably removed without too much pain, it doesn't really do anything interesting. P5 is also disabled by default (like it was before) because many motherboards have it miswired, but according to Alan Cox a few embedded setups use that one. Forward ported/heavily changed version of old patch, original patch included review/fixes from Thomas Gleixner, Bert Wesarg. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-28 19:07:31 +02:00
x86, mce: use 64bit machine check code on 32bit The 64bit machine check code is in many ways much better than the 32bit machine check code: it is more specification compliant, is cleaner, only has a single code base versus one per CPU, has better infrastructure for recovery, has a cleaner way to communicate with user space etc. etc. Use the 64bit code for 32bit too. This is the second attempt to do this. There was one a couple of years ago to unify this code for 32bit and 64bit. Back then this ran into some trouble with K7s and was reverted. I believe this time the K7 problems (and some others) are addressed. I went over the old handlers and was very careful to retain all quirks. But of course this needs a lot of testing on old systems. On newer 64bit capable systems I don't expect much problems because they have been already tested with the 64bit kernel. I made this a CONFIG for now that still allows to select the old machine check code. This is mostly to make testing easier, if someone runs into a problem we can ask them to try with the CONFIG switched. The new code is default y for more coverage. Once there is confidence the 64bit code works well on older hardware too the CONFIG_X86_OLD_MCE and the associated code can be easily removed. This causes a behaviour change for 32bit installations. They now have to install the mcelog package to be able to log corrected machine checks. The 64bit machine check code only handles CPUs which support the standard Intel machine check architecture described in the IA32 SDM. The 32bit code has special support for some older CPUs which have non standard machine check architectures, in particular WinChip C3 and Intel P5. I made those a separate CONFIG option and kept them for now. The WinChip variant could be probably removed without too much pain, it doesn't really do anything interesting. P5 is also disabled by default (like it was before) because many motherboards have it miswired, but according to Alan Cox a few embedded setups use that one. Forward ported/heavily changed version of old patch, original patch included review/fixes from Thomas Gleixner, Bert Wesarg. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-28 19:07:31 +02:00
x86, mce: use 64bit machine check code on 32bit The 64bit machine check code is in many ways much better than the 32bit machine check code: it is more specification compliant, is cleaner, only has a single code base versus one per CPU, has better infrastructure for recovery, has a cleaner way to communicate with user space etc. etc. Use the 64bit code for 32bit too. This is the second attempt to do this. There was one a couple of years ago to unify this code for 32bit and 64bit. Back then this ran into some trouble with K7s and was reverted. I believe this time the K7 problems (and some others) are addressed. I went over the old handlers and was very careful to retain all quirks. But of course this needs a lot of testing on old systems. On newer 64bit capable systems I don't expect much problems because they have been already tested with the 64bit kernel. I made this a CONFIG for now that still allows to select the old machine check code. This is mostly to make testing easier, if someone runs into a problem we can ask them to try with the CONFIG switched. The new code is default y for more coverage. Once there is confidence the 64bit code works well on older hardware too the CONFIG_X86_OLD_MCE and the associated code can be easily removed. This causes a behaviour change for 32bit installations. They now have to install the mcelog package to be able to log corrected machine checks. The 64bit machine check code only handles CPUs which support the standard Intel machine check architecture described in the IA32 SDM. The 32bit code has special support for some older CPUs which have non standard machine check architectures, in particular WinChip C3 and Intel P5. I made those a separate CONFIG option and kept them for now. The WinChip variant could be probably removed without too much pain, it doesn't really do anything interesting. P5 is also disabled by default (like it was before) because many motherboards have it miswired, but according to Alan Cox a few embedded setups use that one. Forward ported/heavily changed version of old patch, original patch included review/fixes from Thomas Gleixner, Bert Wesarg. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-28 19:07:31 +02:00
x86, mce: use 64bit machine check code on 32bit The 64bit machine check code is in many ways much better than the 32bit machine check code: it is more specification compliant, is cleaner, only has a single code base versus one per CPU, has better infrastructure for recovery, has a cleaner way to communicate with user space etc. etc. Use the 64bit code for 32bit too. This is the second attempt to do this. There was one a couple of years ago to unify this code for 32bit and 64bit. Back then this ran into some trouble with K7s and was reverted. I believe this time the K7 problems (and some others) are addressed. I went over the old handlers and was very careful to retain all quirks. But of course this needs a lot of testing on old systems. On newer 64bit capable systems I don't expect much problems because they have been already tested with the 64bit kernel. I made this a CONFIG for now that still allows to select the old machine check code. This is mostly to make testing easier, if someone runs into a problem we can ask them to try with the CONFIG switched. The new code is default y for more coverage. Once there is confidence the 64bit code works well on older hardware too the CONFIG_X86_OLD_MCE and the associated code can be easily removed. This causes a behaviour change for 32bit installations. They now have to install the mcelog package to be able to log corrected machine checks. The 64bit machine check code only handles CPUs which support the standard Intel machine check architecture described in the IA32 SDM. The 32bit code has special support for some older CPUs which have non standard machine check architectures, in particular WinChip C3 and Intel P5. I made those a separate CONFIG option and kept them for now. The WinChip variant could be probably removed without too much pain, it doesn't really do anything interesting. P5 is also disabled by default (like it was before) because many motherboards have it miswired, but according to Alan Cox a few embedded setups use that one. Forward ported/heavily changed version of old patch, original patch included review/fixes from Thomas Gleixner, Bert Wesarg. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-28 19:07:31 +02:00
x86/mm: Simplify enabling direct_gbpages direct_gbpages can be force enabled as an early parameter but not really have taken effect when DEBUG_PAGEALLOC or KMEMCHECK is enabled. You can also enable direct_gbpages right now if you have an x86_64 architecture but your CPU doesn't really have support for this feature. In both cases PG_LEVEL_1G won't actually be enabled but direct_gbpages is used in other areas under the assumptions that PG_LEVEL_1G was set. Fix this by putting together all requirements which make this feature sensible to enable under, and only enable both finally flipping on PG_LEVEL_1G and leaving PG_LEVEL_1G set when this is true. We only enable this feature then to be possible on sensible builds defined by the new ENABLE_DIRECT_GBPAGES. If the CPU has support for it you can either enable this by using the DIRECT_GBPAGES option or using the early kernel parameter. If a platform had support for this you can always force disable it as well. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: JBeulich@suse.com Cc: Jan Beulich <JBeulich@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: julia.lawall@lip6.fr Link: http://lkml.kernel.org/r/1425518654-3403-3-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-04 17:24:12 -08:00
x86/mm: Add Secure Memory Encryption (SME) support Add support for Secure Memory Encryption (SME). This initial support provides a Kconfig entry to build the SME support into the kernel and defines the memory encryption mask that will be used in subsequent patches to mark pages as encrypted. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/a6c34d16caaed3bc3e2d6f0987554275bd291554.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 16:10:03 -05:00
x86/mm: Extend early_memremap() support with additional attrs Add early_memremap() support to be able to specify encrypted and decrypted mappings with and without write-protection. The use of write-protection is necessary when encrypting data "in place". The write-protect attribute is considered cacheable for loads, but not stores. This implies that the hardware will never give the core a dirty line with this memtype. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/479b5832c30fae3efa7932e48f81794e86397229.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 16:10:09 -05:00
x86: 64-bit, make sparsemem vmemmap the only memory model Use sparsemem as the only memory model for UP, SMP and NUMA. Measurements indicate that DISCONTIGMEM has a higher overhead than sparsemem. And FLATMEMs benefits are minimal. So I think its best to simply standardize on sparsemem. Results of page allocator tests (test can be had via git from slab git tree branch tests) Measurements in cycle counts. 1000 allocations were performed and then the average cycle count was calculated. Order FlatMem Discontig SparseMem 0 639 665 641 1 567 647 593 2 679 774 692 3 763 967 781 4 961 1501 962 5 1356 2344 1392 6 2224 3982 2336 7 4869 7225 5074 8 12500 14048 12732 9 27926 28223 28165 10 58578 58714 58682 (Note that FlatMem is an SMP config and the rest NUMA configurations) Memory use: SMP Sparsemem ------------- Kernel size: text data bss dec hex filename 3849268 397739 1264856 5511863 541ab7 vmlinux total used free shared buffers cached Mem: 8242252 41164 8201088 0 352 11512 -/+ buffers/cache: 29300 8212952 Swap: 9775512 0 9775512 SMP Flatmem ----------- Kernel size: text data bss dec hex filename 3844612 397739 1264536 5506887 540747 vmlinux So 4.5k growth in text size vs. FLATMEM. total used free shared buffers cached Mem: 8244052 40544 8203508 0 352 11484 -/+ buffers/cache: 28708 8215344 2k growth in overall memory use after boot. NUMA discontig: text data bss dec hex filename 3888124 470659 1276504 5635287 55fcd7 vmlinux total used free shared buffers cached Mem: 8256256 56908 8199348 0 352 11496 -/+ buffers/cache: 45060 8211196 Swap: 9775512 0 9775512 NUMA sparse: text data bss dec hex filename 3896428 470659 1276824 5643911 561e87 vmlinux 8k text growth. Given that we fully inline virt_to_page and friends now that is rather good. total used free shared buffers cached Mem: 8264720 57240 8207480 0 352 11516 -/+ buffers/cache: 45372 8219348 Swap: 9775512 0 9775512 The total available memory is increased by 8k. This patch makes sparsemem the default and removes discontig and flatmem support from x86. [ akpm@linux-foundation.org: allnoconfig build fix ] Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:47 +01:00
x86: 64-bit, make sparsemem vmemmap the only memory model Use sparsemem as the only memory model for UP, SMP and NUMA. Measurements indicate that DISCONTIGMEM has a higher overhead than sparsemem. And FLATMEMs benefits are minimal. So I think its best to simply standardize on sparsemem. Results of page allocator tests (test can be had via git from slab git tree branch tests) Measurements in cycle counts. 1000 allocations were performed and then the average cycle count was calculated. Order FlatMem Discontig SparseMem 0 639 665 641 1 567 647 593 2 679 774 692 3 763 967 781 4 961 1501 962 5 1356 2344 1392 6 2224 3982 2336 7 4869 7225 5074 8 12500 14048 12732 9 27926 28223 28165 10 58578 58714 58682 (Note that FlatMem is an SMP config and the rest NUMA configurations) Memory use: SMP Sparsemem ------------- Kernel size: text data bss dec hex filename 3849268 397739 1264856 5511863 541ab7 vmlinux total used free shared buffers cached Mem: 8242252 41164 8201088 0 352 11512 -/+ buffers/cache: 29300 8212952 Swap: 9775512 0 9775512 SMP Flatmem ----------- Kernel size: text data bss dec hex filename 3844612 397739 1264536 5506887 540747 vmlinux So 4.5k growth in text size vs. FLATMEM. total used free shared buffers cached Mem: 8244052 40544 8203508 0 352 11484 -/+ buffers/cache: 28708 8215344 2k growth in overall memory use after boot. NUMA discontig: text data bss dec hex filename 3888124 470659 1276504 5635287 55fcd7 vmlinux total used free shared buffers cached Mem: 8256256 56908 8199348 0 352 11496 -/+ buffers/cache: 45060 8211196 Swap: 9775512 0 9775512 NUMA sparse: text data bss dec hex filename 3896428 470659 1276824 5643911 561e87 vmlinux 8k text growth. Given that we fully inline virt_to_page and friends now that is rather good. total used free shared buffers cached Mem: 8264720 57240 8207480 0 352 11516 -/+ buffers/cache: 45372 8219348 Swap: 9775512 0 9775512 The total available memory is increased by 8k. This patch makes sparsemem the default and removes discontig and flatmem support from x86. [ akpm@linux-foundation.org: allnoconfig build fix ] Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:47 +01:00
x86: 64-bit, make sparsemem vmemmap the only memory model Use sparsemem as the only memory model for UP, SMP and NUMA. Measurements indicate that DISCONTIGMEM has a higher overhead than sparsemem. And FLATMEMs benefits are minimal. So I think its best to simply standardize on sparsemem. Results of page allocator tests (test can be had via git from slab git tree branch tests) Measurements in cycle counts. 1000 allocations were performed and then the average cycle count was calculated. Order FlatMem Discontig SparseMem 0 639 665 641 1 567 647 593 2 679 774 692 3 763 967 781 4 961 1501 962 5 1356 2344 1392 6 2224 3982 2336 7 4869 7225 5074 8 12500 14048 12732 9 27926 28223 28165 10 58578 58714 58682 (Note that FlatMem is an SMP config and the rest NUMA configurations) Memory use: SMP Sparsemem ------------- Kernel size: text data bss dec hex filename 3849268 397739 1264856 5511863 541ab7 vmlinux total used free shared buffers cached Mem: 8242252 41164 8201088 0 352 11512 -/+ buffers/cache: 29300 8212952 Swap: 9775512 0 9775512 SMP Flatmem ----------- Kernel size: text data bss dec hex filename 3844612 397739 1264536 5506887 540747 vmlinux So 4.5k growth in text size vs. FLATMEM. total used free shared buffers cached Mem: 8244052 40544 8203508 0 352 11484 -/+ buffers/cache: 28708 8215344 2k growth in overall memory use after boot. NUMA discontig: text data bss dec hex filename 3888124 470659 1276504 5635287 55fcd7 vmlinux total used free shared buffers cached Mem: 8256256 56908 8199348 0 352 11496 -/+ buffers/cache: 45060 8211196 Swap: 9775512 0 9775512 NUMA sparse: text data bss dec hex filename 3896428 470659 1276824 5643911 561e87 vmlinux 8k text growth. Given that we fully inline virt_to_page and friends now that is rather good. total used free shared buffers cached Mem: 8264720 57240 8207480 0 352 11516 -/+ buffers/cache: 45372 8219348 Swap: 9775512 0 9775512 The total available memory is increased by 8k. This patch makes sparsemem the default and removes discontig and flatmem support from x86. [ akpm@linux-foundation.org: allnoconfig build fix ] Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:47 +01:00
2013-07-19 11:47:48 -06:00
2013-07-19 11:47:48 -06:00
x86: change MTRR_SANITIZER to def_bool y This option has been added in v2.6.26 as a default-disabled feature and went through several revisions since then. The feature fixes a wide range of MTRR setup problems that BIOSes leave us with: slow system, slow Xorg, slow system when adding lots of RAM, etc., so we want to enable it by default for v2.6.28. See: [Bug 10508] Upgrade to 4GB of RAM messes up MTRRs http://bugzilla.kernel.org/show_bug.cgi?id=10508 and the test results in: http://lkml.org/lkml/2008/9/29/273 1. hpa reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1 reg01: base=0x13c000000 (5056MB), size= 64MB: uncachable, count=1 reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg03: base=0x100000000 (4096MB), size=1024MB: write-back, count=1 reg04: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1 reg05: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 128M num_reg: 6 lose RAM: 0M range0: 0000000000000000 - 00000000c0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB hole: 00000000bf700000 - 00000000c0000000 Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC range0: 0000000100000000 - 0000000140000000 Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB hole: 000000013c000000 - 0000000140000000 Setting variable MTRR 5, base: 5056MB, range: 64MB, type UC 2. Dylan Taft reg00: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg01: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 reg02: base=0x120000000 (4608MB), size= 256MB: write-back, count=1 reg03: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1 reg04: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 reg05: base=0xc7e00000 (3198MB), size= 2MB: uncachable, count=1 reg06: base=0xc8000000 (3200MB), size= 128MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 4M num_reg: 6 lose RAM: 0M range0: 0000000000000000 - 00000000c8000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 128MB, type WB hole: 00000000c7e00000 - 00000000c8000000 Setting variable MTRR 3, base: 3198MB, range: 2MB, type UC rangeX: 0000000100000000 - 0000000130000000 Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB 3. Gabriel reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1 reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1 reg05: base=0x128000000 (4736MB), size= 64MB: write-back, count=1 reg06: base=0xcf600000 (3318MB), size= 2MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 16M num_reg: 7 lose RAM: 0M range0: 0000000000000000 - 00000000d0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB hole: 00000000cf600000 - 00000000cf800000 Setting variable MTRR 3, base: 3318MB, range: 2MB, type UC rangeX: 0000000100000000 - 000000012c000000 Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB Setting variable MTRR 5, base: 4608MB, range: 128MB, type WB Setting variable MTRR 6, base: 4736MB, range: 64MB, type WB 4. Mika Fischer reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1 reg01: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg02: base=0x100000000 (4096MB), size=1024MB: write-back, count=1 reg03: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1 reg04: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 16M num_reg: 5 lose RAM: 0M range0: 0000000000000000 - 00000000c0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB hole: 00000000bf700000 - 00000000c0000000 Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC rangeX: 0000000100000000 - 0000000140000000 Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 16:29:40 -07:00
x86: change MTRR_SANITIZER to def_bool y This option has been added in v2.6.26 as a default-disabled feature and went through several revisions since then. The feature fixes a wide range of MTRR setup problems that BIOSes leave us with: slow system, slow Xorg, slow system when adding lots of RAM, etc., so we want to enable it by default for v2.6.28. See: [Bug 10508] Upgrade to 4GB of RAM messes up MTRRs http://bugzilla.kernel.org/show_bug.cgi?id=10508 and the test results in: http://lkml.org/lkml/2008/9/29/273 1. hpa reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1 reg01: base=0x13c000000 (5056MB), size= 64MB: uncachable, count=1 reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg03: base=0x100000000 (4096MB), size=1024MB: write-back, count=1 reg04: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1 reg05: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 128M num_reg: 6 lose RAM: 0M range0: 0000000000000000 - 00000000c0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB hole: 00000000bf700000 - 00000000c0000000 Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC range0: 0000000100000000 - 0000000140000000 Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB hole: 000000013c000000 - 0000000140000000 Setting variable MTRR 5, base: 5056MB, range: 64MB, type UC 2. Dylan Taft reg00: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg01: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 reg02: base=0x120000000 (4608MB), size= 256MB: write-back, count=1 reg03: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1 reg04: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 reg05: base=0xc7e00000 (3198MB), size= 2MB: uncachable, count=1 reg06: base=0xc8000000 (3200MB), size= 128MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 4M num_reg: 6 lose RAM: 0M range0: 0000000000000000 - 00000000c8000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 128MB, type WB hole: 00000000c7e00000 - 00000000c8000000 Setting variable MTRR 3, base: 3198MB, range: 2MB, type UC rangeX: 0000000100000000 - 0000000130000000 Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB 3. Gabriel reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1 reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1 reg05: base=0x128000000 (4736MB), size= 64MB: write-back, count=1 reg06: base=0xcf600000 (3318MB), size= 2MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 16M num_reg: 7 lose RAM: 0M range0: 0000000000000000 - 00000000d0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB hole: 00000000cf600000 - 00000000cf800000 Setting variable MTRR 3, base: 3318MB, range: 2MB, type UC rangeX: 0000000100000000 - 000000012c000000 Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB Setting variable MTRR 5, base: 4608MB, range: 128MB, type WB Setting variable MTRR 6, base: 4736MB, range: 64MB, type WB 4. Mika Fischer reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1 reg01: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 reg02: base=0x100000000 (4096MB), size=1024MB: write-back, count=1 reg03: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1 reg04: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1 will get Found optimal setting for mtrr clean up gran_size: 1M chunk_size: 16M num_reg: 5 lose RAM: 0M range0: 0000000000000000 - 00000000c0000000 Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB hole: 00000000bf700000 - 00000000c0000000 Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC rangeX: 0000000100000000 - 0000000140000000 Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 16:29:40 -07:00
x86, random: Architectural inlines to get random integers with RDRAND Architectural inlines to get random ints and longs using the RDRAND instruction. Intel has introduced a new RDRAND instruction, a Digital Random Number Generator (DRNG), which is functionally an high bandwidth entropy source, cryptographic whitener, and integrity monitor all built into hardware. This enables RDRAND to be used directly, bypassing the kernel random number pool. For technical documentation, see: http://software.intel.com/en-us/articles/download-the-latest-bull-mountain-software-implementation-guide/ In this patch, this is *only* used for the nonblocking random number pool. RDRAND is a nonblocking source, similar to our /dev/urandom, and is therefore not a direct replacement for /dev/random. The architectural hooks presented in the previous patch only feed the kernel internal users, which only use the nonblocking pool, and so this is not a problem. Since this instruction is available in userspace, there is no reason to have a /dev/hw_rng device driver for the purpose of feeding rngd. This is especially so since RDRAND is a nonblocking source, and needs additional whitening and reduction (see the above technical documentation for details) in order to be of "pure entropy source" quality. The CONFIG_EXPERT compile-time option can be used to disable this use of RDRAND. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Originally-by: Fenghua Yu <fenghua.yu@intel.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Theodore Ts'o" <tytso@mit.edu>
2011-07-31 13:59:29 -07:00
x86/umip: Enable User-Mode Instruction Prevention at runtime User-Mode Instruction Prevention (UMIP) is enabled by setting/clearing a bit in %cr4. It makes sense to enable UMIP at some point while booting, before user spaces come up. Like SMAP and SMEP, is not critical to have it enabled very early during boot. This is because UMIP is relevant only when there is a user space to be protected from. Given these similarities, UMIP can be enabled along with SMAP and SMEP. At the moment, UMIP is disabled by default at build time. It can be enabled at build time by selecting CONFIG_X86_INTEL_UMIP. If enabled at build time, it can be disabled at run time by adding clearcpuid=514 to the kernel parameters. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: ricardo.neri@intel.com Link: http://lkml.kernel.org/r/1509935277-22138-10-git-send-email-ricardo.neri-calderon@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-05 18:27:54 -08:00
x86/umip: Enable User-Mode Instruction Prevention at runtime User-Mode Instruction Prevention (UMIP) is enabled by setting/clearing a bit in %cr4. It makes sense to enable UMIP at some point while booting, before user spaces come up. Like SMAP and SMEP, is not critical to have it enabled very early during boot. This is because UMIP is relevant only when there is a user space to be protected from. Given these similarities, UMIP can be enabled along with SMAP and SMEP. At the moment, UMIP is disabled by default at build time. It can be enabled at build time by selecting CONFIG_X86_INTEL_UMIP. If enabled at build time, it can be disabled at run time by adding clearcpuid=514 to the kernel parameters. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: ricardo.neri@intel.com Link: http://lkml.kernel.org/r/1509935277-22138-10-git-send-email-ricardo.neri-calderon@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-05 18:27:54 -08:00
x86/umip: Enable User-Mode Instruction Prevention at runtime User-Mode Instruction Prevention (UMIP) is enabled by setting/clearing a bit in %cr4. It makes sense to enable UMIP at some point while booting, before user spaces come up. Like SMAP and SMEP, is not critical to have it enabled very early during boot. This is because UMIP is relevant only when there is a user space to be protected from. Given these similarities, UMIP can be enabled along with SMAP and SMEP. At the moment, UMIP is disabled by default at build time. It can be enabled at build time by selecting CONFIG_X86_INTEL_UMIP. If enabled at build time, it can be disabled at run time by adding clearcpuid=514 to the kernel parameters. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: ricardo.neri@intel.com Link: http://lkml.kernel.org/r/1509935277-22138-10-git-send-email-ricardo.neri-calderon@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-05 18:27:54 -08:00
x86,mpx: make mpx depend on x86-64 to free up VMA flag Patch series "mm,fork,security: introduce MADV_WIPEONFORK", v4. If a child process accesses memory that was MADV_WIPEONFORK, it will get zeroes. The address ranges are still valid, they are just empty. If a child process accesses memory that was MADV_DONTFORK, it will get a segmentation fault, since those address ranges are no longer valid in the child after fork. Since MADV_DONTFORK also seems to be used to allow very large programs to fork in systems with strict memory overcommit restrictions, changing the semantics of MADV_DONTFORK might break existing programs. The use case is libraries that store or cache information, and want to know that they need to regenerate it in the child process after fork. Examples of this would be: - systemd/pulseaudio API checks (fail after fork) (replacing a getpid check, which is too slow without a PID cache) - PKCS#11 API reinitialization check (mandated by specification) - glibc's upcoming PRNG (reseed after fork) - OpenSSL PRNG (reseed after fork) The security benefits of a forking server having a re-inialized PRNG in every child process are pretty obvious. However, due to libraries having all kinds of internal state, and programs getting compiled with many different versions of each library, it is unreasonable to expect calling programs to re-initialize everything manually after fork. A further complication is the proliferation of clone flags, programs bypassing glibc's functions to call clone directly, and programs calling unshare, causing the glibc pthread_atfork hook to not get called. It would be better to have the kernel take care of this automatically. The patchset also adds MADV_KEEPONFORK, to undo the effects of a prior MADV_WIPEONFORK. This is similar to the OpenBSD minherit syscall with MAP_INHERIT_ZERO: https://man.openbsd.org/minherit.2 This patch (of 2): MPX only seems to be available on 64 bit CPUs, starting with Skylake and Goldmont. Move VM_MPX into the 64 bit only portion of vma->vm_flags, in order to free up a VMA flag. Link: http://lkml.kernel.org/r/20170811212829.29186-2-riel@redhat.com Signed-off-by: Rik van Riel <riel@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Colm MacCártaigh <colm@allcosts.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 16:25:11 -07:00
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
x86, efi: EFI boot stub support There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-12 21:27:52 +00:00
2015-09-09 15:38:55 -07:00
kexec: create a new config option CONFIG_KEXEC_FILE for new syscall Currently new system call kexec_file_load() and all the associated code compiles if CONFIG_KEXEC=y. But new syscall also compiles purgatory code which currently uses gcc option -mcmodel=large. This option seems to be available only gcc 4.4 onwards. Hiding new functionality behind a new config option will not break existing users of old gcc. Those who wish to enable new functionality will require new gcc. Having said that, I am trying to figure out how can I move away from using -mcmodel=large but that can take a while. I think there are other advantages of introducing this new config option. As this option will be enabled only on x86_64, other arches don't have to compile generic kexec code which will never be used. This new code selects CRYPTO=y and CRYPTO_SHA256=y. And all other arches had to do this for CONFIG_KEXEC. Now with introduction of new config option, we can remove crypto dependency from other arches. Now CONFIG_KEXEC_FILE is available only on x86_64. So whereever I had CONFIG_X86_64 defined, I got rid of that. For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to "depends on CRYPTO=y". This should be safer as "select" is not recursive. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Tested-by: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29 15:18:46 -07:00
2015-09-09 15:38:55 -07:00
kexec: create a new config option CONFIG_KEXEC_FILE for new syscall Currently new system call kexec_file_load() and all the associated code compiles if CONFIG_KEXEC=y. But new syscall also compiles purgatory code which currently uses gcc option -mcmodel=large. This option seems to be available only gcc 4.4 onwards. Hiding new functionality behind a new config option will not break existing users of old gcc. Those who wish to enable new functionality will require new gcc. Having said that, I am trying to figure out how can I move away from using -mcmodel=large but that can take a while. I think there are other advantages of introducing this new config option. As this option will be enabled only on x86_64, other arches don't have to compile generic kexec code which will never be used. This new code selects CRYPTO=y and CRYPTO_SHA256=y. And all other arches had to do this for CONFIG_KEXEC. Now with introduction of new config option, we can remove crypto dependency from other arches. Now CONFIG_KEXEC_FILE is available only on x86_64. So whereever I had CONFIG_X86_64 defined, I got rid of that. For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to "depends on CRYPTO=y". This should be safer as "select" is not recursive. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Tested-by: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29 15:18:46 -07:00
kexec: verify the signature of signed PE bzImage This is the final piece of the puzzle of verifying kernel image signature during kexec_file_load() syscall. This patch calls into PE file routines to verify signature of bzImage. If signature are valid, kexec_file_load() succeeds otherwise it fails. Two new config options have been introduced. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. I tested these patches with both "pesign" and "sbsign" signed bzImages. I used signing_key.priv key and signing_key.x509 cert for signing as generated during kernel build process (if module signing is enabled). Used following method to sign bzImage. pesign ====== - Convert DER format cert to PEM format cert openssl x509 -in signing_key.x509 -inform DER -out signing_key.x509.PEM -outform PEM - Generate a .p12 file from existing cert and private key file openssl pkcs12 -export -out kernel-key.p12 -inkey signing_key.priv -in signing_key.x509.PEM - Import .p12 file into pesign db pk12util -i /tmp/kernel-key.p12 -d /etc/pki/pesign - Sign bzImage pesign -i /boot/vmlinuz-3.16.0-rc3+ -o /boot/vmlinuz-3.16.0-rc3+.signed.pesign -c "Glacier signing key - Magrathea" -s sbsign ====== sbsign --key signing_key.priv --cert signing_key.x509.PEM --output /boot/vmlinuz-3.16.0-rc3+.signed.sbsign /boot/vmlinuz-3.16.0-rc3+ Patch details: Well all the hard work is done in previous patches. Now bzImage loader has just call into that code and verify whether bzImage signature are valid or not. Also create two config options. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Matt Fleming <matt@console-pimps.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 14:26:13 -07:00
kexec: create a new config option CONFIG_KEXEC_FILE for new syscall Currently new system call kexec_file_load() and all the associated code compiles if CONFIG_KEXEC=y. But new syscall also compiles purgatory code which currently uses gcc option -mcmodel=large. This option seems to be available only gcc 4.4 onwards. Hiding new functionality behind a new config option will not break existing users of old gcc. Those who wish to enable new functionality will require new gcc. Having said that, I am trying to figure out how can I move away from using -mcmodel=large but that can take a while. I think there are other advantages of introducing this new config option. As this option will be enabled only on x86_64, other arches don't have to compile generic kexec code which will never be used. This new code selects CRYPTO=y and CRYPTO_SHA256=y. And all other arches had to do this for CONFIG_KEXEC. Now with introduction of new config option, we can remove crypto dependency from other arches. Now CONFIG_KEXEC_FILE is available only on x86_64. So whereever I had CONFIG_X86_64 defined, I got rid of that. For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to "depends on CRYPTO=y". This should be safer as "select" is not recursive. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Tested-by: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29 15:18:46 -07:00
kexec: verify the signature of signed PE bzImage This is the final piece of the puzzle of verifying kernel image signature during kexec_file_load() syscall. This patch calls into PE file routines to verify signature of bzImage. If signature are valid, kexec_file_load() succeeds otherwise it fails. Two new config options have been introduced. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. I tested these patches with both "pesign" and "sbsign" signed bzImages. I used signing_key.priv key and signing_key.x509 cert for signing as generated during kernel build process (if module signing is enabled). Used following method to sign bzImage. pesign ====== - Convert DER format cert to PEM format cert openssl x509 -in signing_key.x509 -inform DER -out signing_key.x509.PEM -outform PEM - Generate a .p12 file from existing cert and private key file openssl pkcs12 -export -out kernel-key.p12 -inkey signing_key.priv -in signing_key.x509.PEM - Import .p12 file into pesign db pk12util -i /tmp/kernel-key.p12 -d /etc/pki/pesign - Sign bzImage pesign -i /boot/vmlinuz-3.16.0-rc3+ -o /boot/vmlinuz-3.16.0-rc3+.signed.pesign -c "Glacier signing key - Magrathea" -s sbsign ====== sbsign --key signing_key.priv --cert signing_key.x509.PEM --output /boot/vmlinuz-3.16.0-rc3+.signed.sbsign /boot/vmlinuz-3.16.0-rc3+ Patch details: Well all the hard work is done in previous patches. Now bzImage loader has just call into that code and verify whether bzImage signature are valid or not. Also create two config options. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Matt Fleming <matt@console-pimps.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 14:26:13 -07:00
kexec: verify the signature of signed PE bzImage This is the final piece of the puzzle of verifying kernel image signature during kexec_file_load() syscall. This patch calls into PE file routines to verify signature of bzImage. If signature are valid, kexec_file_load() succeeds otherwise it fails. Two new config options have been introduced. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. I tested these patches with both "pesign" and "sbsign" signed bzImages. I used signing_key.priv key and signing_key.x509 cert for signing as generated during kernel build process (if module signing is enabled). Used following method to sign bzImage. pesign ====== - Convert DER format cert to PEM format cert openssl x509 -in signing_key.x509 -inform DER -out signing_key.x509.PEM -outform PEM - Generate a .p12 file from existing cert and private key file openssl pkcs12 -export -out kernel-key.p12 -inkey signing_key.priv -in signing_key.x509.PEM - Import .p12 file into pesign db pk12util -i /tmp/kernel-key.p12 -d /etc/pki/pesign - Sign bzImage pesign -i /boot/vmlinuz-3.16.0-rc3+ -o /boot/vmlinuz-3.16.0-rc3+.signed.pesign -c "Glacier signing key - Magrathea" -s sbsign ====== sbsign --key signing_key.priv --cert signing_key.x509.PEM --output /boot/vmlinuz-3.16.0-rc3+.signed.sbsign /boot/vmlinuz-3.16.0-rc3+ Patch details: Well all the hard work is done in previous patches. Now bzImage loader has just call into that code and verify whether bzImage signature are valid or not. Also create two config options. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Matt Fleming <matt@console-pimps.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 14:26:13 -07:00
kexec: verify the signature of signed PE bzImage This is the final piece of the puzzle of verifying kernel image signature during kexec_file_load() syscall. This patch calls into PE file routines to verify signature of bzImage. If signature are valid, kexec_file_load() succeeds otherwise it fails. Two new config options have been introduced. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. I tested these patches with both "pesign" and "sbsign" signed bzImages. I used signing_key.priv key and signing_key.x509 cert for signing as generated during kernel build process (if module signing is enabled). Used following method to sign bzImage. pesign ====== - Convert DER format cert to PEM format cert openssl x509 -in signing_key.x509 -inform DER -out signing_key.x509.PEM -outform PEM - Generate a .p12 file from existing cert and private key file openssl pkcs12 -export -out kernel-key.p12 -inkey signing_key.priv -in signing_key.x509.PEM - Import .p12 file into pesign db pk12util -i /tmp/kernel-key.p12 -d /etc/pki/pesign - Sign bzImage pesign -i /boot/vmlinuz-3.16.0-rc3+ -o /boot/vmlinuz-3.16.0-rc3+.signed.pesign -c "Glacier signing key - Magrathea" -s sbsign ====== sbsign --key signing_key.priv --cert signing_key.x509.PEM --output /boot/vmlinuz-3.16.0-rc3+.signed.sbsign /boot/vmlinuz-3.16.0-rc3+ Patch details: Well all the hard work is done in previous patches. Now bzImage loader has just call into that code and verify whether bzImage signature are valid or not. Also create two config options. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Matt Fleming <matt@console-pimps.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 14:26:13 -07:00
kexec jump This patch provides an enhancement to kexec/kdump. It implements the following features: - Backup/restore memory used by the original kernel before/after kexec. - Save/restore CPU state before/after kexec. The features of this patch can be used as a general method to call program in physical mode (paging turning off). This can be used to call BIOS code under Linux. kexec-tools needs to be patched to support kexec jump. The patches and the precompiled kexec can be download from the following URL: source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2 patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2 binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10 Usage example of calling some physical mode code and return: 1. Compile and install patched kernel with following options selected: CONFIG_X86_32=y CONFIG_KEXEC=y CONFIG_PM=y CONFIG_KEXEC_JUMP=y 2. Build patched kexec-tool or download the pre-built one. 3. Build some physical mode executable named such as "phy_mode" 4. Boot kernel compiled in step 1. 5. Load physical mode executable with /sbin/kexec. The shell command line can be as follow: /sbin/kexec --load-preserve-context --args-none phy_mode 6. Call physical mode executable with following shell command line: /sbin/kexec -e Implementation point: To support jumping without reserving memory. One shadow backup page (source page) is allocated for each page used by kexeced code image (destination page). When do kexec_load, the image of kexeced code is loaded into source pages, and before executing, the destination pages and the source pages are swapped, so the contents of destination pages are backupped. Before jumping to the kexeced code image and after jumping back to the original kernel, the destination pages and the source pages are swapped too. C ABI (calling convention) is used as communication protocol between kernel and called code. A flag named KEXEC_PRESERVE_CONTEXT for sys_kexec_load is added to indicate that the loaded kernel image is used for jumping back. Now, only the i386 architecture is supported. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 19:45:07 -07:00
kexec jump: save/restore device state This patch implements devices state save/restore before after kexec. This patch together with features in kexec_jump patch can be used for following: - A simple hibernation implementation without ACPI support. You can kexec a hibernating kernel, save the memory image of original system and shutdown the system. When resuming, you restore the memory image of original system via ordinary kexec load then jump back. - Kernel/system debug through making system snapshot. You can make system snapshot, jump back, do some thing and make another system snapshot. - Cooperative multi-kernel/system. With kexec jump, you can switch between several kernels/systems quickly without boot process except the first time. This appears like swap a whole kernel/system out/in. - A general method to call program in physical mode (paging turning off). This can be used to invoke BIOS code under Linux. The following user-space tools can be used with kexec jump: - kexec-tools needs to be patched to support kexec jump. The patches and the precompiled kexec can be download from the following URL: source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2 patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2 binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10 - makedumpfile with patches are used as memory image saving tool, it can exclude free pages from original kernel memory image file. The patches and the precompiled makedumpfile can be download from the following URL: source: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-src_cvs_kh10.tar.bz2 patches: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-patches_cvs_kh10.tar.bz2 binary: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile_cvs_kh10 - An initramfs image can be used as the root file system of kexeced kernel. An initramfs image built with "BuildRoot" can be downloaded from the following URL: initramfs image: http://khibernation.sourceforge.net/download/release_v10/initramfs/rootfs_cvs_kh10.gz All user space tools above are included in the initramfs image. Usage example of simple hibernation: 1. Compile and install patched kernel with following options selected: CONFIG_X86_32=y CONFIG_RELOCATABLE=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_PM=y CONFIG_HIBERNATION=y CONFIG_KEXEC_JUMP=y 2. Build an initramfs image contains kexec-tool and makedumpfile, or download the pre-built initramfs image, called rootfs.gz in following text. 3. Prepare a partition to save memory image of original kernel, called hibernating partition in following text. 4. Boot kernel compiled in step 1 (kernel A). 5. In the kernel A, load kernel compiled in step 1 (kernel B) with /sbin/kexec. The shell command line can be as follow: /sbin/kexec --load-preserve-context /boot/bzImage --mem-min=0x100000 --mem-max=0xffffff --initrd=rootfs.gz 6. Boot the kernel B with following shell command line: /sbin/kexec -e 7. The kernel B will boot as normal kexec. In kernel B the memory image of kernel A can be saved into hibernating partition as follow: jump_back_entry=`cat /proc/cmdline | tr ' ' '\n' | grep kexec_jump_back_entry | cut -d '='` echo $jump_back_entry > kexec_jump_back_entry cp /proc/vmcore dump.elf Then you can shutdown the machine as normal. 8. Boot kernel compiled in step 1 (kernel C). Use the rootfs.gz as root file system. 9. In kernel C, load the memory image of kernel A as follow: /sbin/kexec -l --args-none --entry=`cat kexec_jump_back_entry` dump.elf 10. Jump back to the kernel A as follow: /sbin/kexec -e Then, kernel A is resumed. Implementation point: To support jumping between two kernels, before jumping to (executing) the new kernel and jumping back to the original kernel, the devices are put into quiescent state, and the state of devices and CPU is saved. After jumping back from kexeced kernel and jumping to the new kernel, the state of devices and CPU are restored accordingly. The devices/CPU state save/restore code of software suspend is called to implement corresponding function. Known issues: - Because the segment number supported by sys_kexec_load is limited, hibernation image with many segments may not be load. This is planned to be eliminated by adding a new flag to sys_kexec_load to make a image can be loaded with multiple sys_kexec_load invoking. Now, only the i386 architecture is supported. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 19:45:10 -07:00
kexec jump This patch provides an enhancement to kexec/kdump. It implements the following features: - Backup/restore memory used by the original kernel before/after kexec. - Save/restore CPU state before/after kexec. The features of this patch can be used as a general method to call program in physical mode (paging turning off). This can be used to call BIOS code under Linux. kexec-tools needs to be patched to support kexec jump. The patches and the precompiled kexec can be download from the following URL: source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2 patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2 binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10 Usage example of calling some physical mode code and return: 1. Compile and install patched kernel with following options selected: CONFIG_X86_32=y CONFIG_KEXEC=y CONFIG_PM=y CONFIG_KEXEC_JUMP=y 2. Build patched kexec-tool or download the pre-built one. 3. Build some physical mode executable named such as "phy_mode" 4. Boot kernel compiled in step 1. 5. Load physical mode executable with /sbin/kexec. The shell command line can be as follow: /sbin/kexec --load-preserve-context --args-none phy_mode 6. Call physical mode executable with following shell command line: /sbin/kexec -e Implementation point: To support jumping without reserving memory. One shadow backup page (source page) is allocated for each page used by kexeced code image (destination page). When do kexec_load, the image of kexeced code is loaded into source pages, and before executing, the destination pages and the source pages are swapped, so the contents of destination pages are backupped. Before jumping to the kexeced code image and after jumping back to the original kernel, the destination pages and the source pages are swapped too. C ABI (calling convention) is used as communication protocol between kernel and called code. A flag named KEXEC_PRESERVE_CONTEXT for sys_kexec_load is added to indicate that the loaded kernel image is used for jumping back. Now, only the i386 architecture is supported. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 19:45:07 -07:00
x86/mm: Implement ASLR for kernel memory regions Randomizes the virtual address space of kernel memory regions for x86_64. This first patch adds the infrastructure and does not randomize any region. The following patches will randomize the physical memory mapping, vmalloc and vmemmap regions. This security feature mitigates exploits relying on predictable kernel addresses. These addresses can be used to disclose the kernel modules base addresses or corrupt specific structures to elevate privileges bypassing the current implementation of KASLR. This feature can be enabled with the CONFIG_RANDOMIZE_MEMORY option. The order of each memory region is not changed. The feature looks at the available space for the regions based on different configuration options and randomizes the base and space between each. The size of the physical memory mapping is the available physical memory. No performance impact was detected while testing the feature. Entropy is generated using the KASLR early boot functions now shared in the lib directory (originally written by Kees Cook). Randomization is done on PGD & PUD page table levels to increase possible addresses. The physical memory mapping code was adapted to support PUD level virtual addresses. This implementation on the best configuration provides 30,000 possible virtual addresses in average for each memory region. An additional low memory page is used to ensure each CPU can start with a PGD aligned virtual address (for realmode). x86/dump_pagetable was updated to correctly display each region. Updated documentation on x86_64 memory layout accordingly. Performance data, after all patches in the series: Kernbench shows almost no difference (-+ less than 1%): Before: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.63 (1.2695) User Time 1034.89 (1.18115) System Time 87.056 (0.456416) Percent CPU 1092.9 (13.892) Context Switches 199805 (3455.33) Sleeps 97907.8 (900.636) After: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.489 (1.10636) User Time 1034.86 (1.36053) System Time 87.764 (0.49345) Percent CPU 1095 (12.7715) Context Switches 199036 (4298.1) Sleeps 97681.6 (1031.11) Hackbench shows 0% difference on average (hackbench 90 repeated 10 times): attemp,before,after 1,0.076,0.069 2,0.072,0.069 3,0.066,0.066 4,0.066,0.068 5,0.066,0.067 6,0.066,0.069 7,0.067,0.066 8,0.063,0.067 9,0.067,0.065 10,0.068,0.071 average,0.0677,0.0677 Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1466556426-32664-6-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-21 17:47:02 -07:00
x86/mm: Implement ASLR for kernel memory regions Randomizes the virtual address space of kernel memory regions for x86_64. This first patch adds the infrastructure and does not randomize any region. The following patches will randomize the physical memory mapping, vmalloc and vmemmap regions. This security feature mitigates exploits relying on predictable kernel addresses. These addresses can be used to disclose the kernel modules base addresses or corrupt specific structures to elevate privileges bypassing the current implementation of KASLR. This feature can be enabled with the CONFIG_RANDOMIZE_MEMORY option. The order of each memory region is not changed. The feature looks at the available space for the regions based on different configuration options and randomizes the base and space between each. The size of the physical memory mapping is the available physical memory. No performance impact was detected while testing the feature. Entropy is generated using the KASLR early boot functions now shared in the lib directory (originally written by Kees Cook). Randomization is done on PGD & PUD page table levels to increase possible addresses. The physical memory mapping code was adapted to support PUD level virtual addresses. This implementation on the best configuration provides 30,000 possible virtual addresses in average for each memory region. An additional low memory page is used to ensure each CPU can start with a PGD aligned virtual address (for realmode). x86/dump_pagetable was updated to correctly display each region. Updated documentation on x86_64 memory layout accordingly. Performance data, after all patches in the series: Kernbench shows almost no difference (-+ less than 1%): Before: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.63 (1.2695) User Time 1034.89 (1.18115) System Time 87.056 (0.456416) Percent CPU 1092.9 (13.892) Context Switches 199805 (3455.33) Sleeps 97907.8 (900.636) After: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.489 (1.10636) User Time 1034.86 (1.36053) System Time 87.764 (0.49345) Percent CPU 1095 (12.7715) Context Switches 199036 (4298.1) Sleeps 97681.6 (1031.11) Hackbench shows 0% difference on average (hackbench 90 repeated 10 times): attemp,before,after 1,0.076,0.069 2,0.072,0.069 3,0.066,0.066 4,0.066,0.068 5,0.066,0.067 6,0.066,0.069 7,0.067,0.066 8,0.063,0.067 9,0.067,0.065 10,0.068,0.071 average,0.0677,0.0677 Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1466556426-32664-6-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-21 17:47:02 -07:00
x86/mm: Add memory hotplug support for KASLR memory randomization Add a new option (CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING) to define the padding used for the physical memory mapping section when KASLR memory is enabled. It ensures there is enough virtual address space when CONFIG_MEMORY_HOTPLUG is used. The default value is 10 terabytes. If CONFIG_MEMORY_HOTPLUG is not used, no space is reserved increasing the entropy available. Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1466556426-32664-10-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-21 17:47:06 -07:00
mm/memory_hotplug: introduce add_pages There are new users of memory hotplug emerging. Some of them require different subset of arch_add_memory. There are some which only require allocation of struct pages without mapping those pages to the kernel address space. We currently have __add_pages for that purpose. But this is rather lowlevel and not very suitable for the code outside of the memory hotplug. E.g. x86_64 wants to update max_pfn which should be done by the caller. Introduce add_pages() which should care about those details if they are needed. Each architecture should define its implementation and select CONFIG_ARCH_HAS_ADD_PAGES. All others use the currently existing __add_pages. Link: http://lkml.kernel.org/r/20170817000548.32038-7-jglisse@redhat.com Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 16:11:39 -07:00
x86: provide platform-devices for boot-framebuffers The current situation regarding boot-framebuffers (VGA, VESA/VBE, EFI) on x86 causes troubles when loading multiple fbdev drivers. The global "struct screen_info" does not provide any state-tracking about which drivers use the FBs. request_mem_region() theoretically works, but unfortunately vesafb/efifb ignore it due to quirks for broken boards. Avoid this by creating a platform framebuffer devices with a pointer to the "struct screen_info" as platform-data. Drivers can now create platform-drivers and the driver-core will refuse multiple drivers being active simultaneously. We keep the screen_info available for backwards-compatibility. Drivers can be converted in follow-up patches. Different devices are created for VGA/VESA/EFI FBs to allow multiple drivers to be loaded on distro kernels. We create: - "vesa-framebuffer" for VBE/VESA graphics FBs - "efi-framebuffer" for EFI FBs - "platform-framebuffer" for everything else This allows to load vesafb, efifb and others simultaneously and each picks up only the supported FB types. Apart from platform-framebuffer devices, this also introduces a compatibility option for "simple-framebuffer" drivers which recently got introduced for OF based systems. If CONFIG_X86_SYSFB is selected, we try to match the screen_info against a simple-framebuffer supported format. If we succeed, we create a "simple-framebuffer" device instead of a platform-framebuffer. This allows to reuse the simplefb.c driver across architectures and also to introduce a SimpleDRM driver. There is no need to have vesafb.c, efifb.c, simplefb.c and more just to have architecture specific quirks in their setup-routines. Instead, we now move the architecture specific quirks into x86-setup and provide a generic simple-framebuffer. For backwards-compatibility (if strange formats are used), we still allow vesafb/efifb to be loaded simultaneously and pick up all remaining devices. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Link: http://lkml.kernel.org/r/1375445127-15480-4-git-send-email-dh.herrmann@gmail.com Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-08-02 14:05:22 +02:00