linux/drivers/usb/host/Kconfig

809 lines
26 KiB

USB: EHCI: make ehci-orion a separate driver Separate the Orion host controller driver from ehci-hcd host code into its own driver module because of following reason. With the multiplatform changes in arm-soc tree, it becomes possible to enable the mvebu platform (which uses ehci-orion) at the same time as other platforms that require a conflicting EHCI bus glue. At the moment, this results in a warning like drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable] and an ehci driver that only works on one of them. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the orion bus glue. An earlier version of this patch was included in 3.9 but caused a regression there, which has subsequently been fixed. While we are here, use the opportunity to disabiguate the two Marvell EHCI controller implementations in Kconfig. In V4 (arnd): - Improve Kconfig text In V3: - More detail provided in commit message regarding this patch. - Replaced hcd_name string "ehci-orion" into "orion-ehci". - MODULE_LICENSE is GPL v2. - In ehci_init_driver calling second argument passed as NULL instead of ehci_orion_overrides because ehci_orion_overrides is removed. In V2: - Tegra patch related changes removed from this patch. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02 18:23:59 +02:00
USB: EHCI: make ehci-spear a separate driver Separate the SPEAr host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before SPEAr can be booted with a multi-platform kernel, but they are queued in the arm-soc tree for 3.10. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the SPEAr bus glue. In V4 (arnd): - renamed all 'struct spear_ehci' pointers from 'ehci' to the less ambiguous 'sehci'. - folded trivial spear_start_ehci/spear_stop_ehci functions into callers. - brought back initialization of ehci->caps. In V3: - Detailed commit message added here about why this patch is required. - Eliminated ehci_spear_setup routine because hcd registers can be directly set in the spear_ehci_hcd_drv_probe function. - spear_overrides struct initialized. - Converted to using .extra_priv_size for allocating spear_ehci, and updated all users of that structure. - to_spear_ehci() macro modified for spear_ehci. In V2: - Replaced spear as SPEAr everywhere, leaving functions/variables/config options. Signed-off-by: Deepak Saxena <dsaxena@linaro.org> Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.linux@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: spear-devel@list.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02 18:24:00 +02:00
USB: EHCI: make ehci-atmel a separate driver Separate the Atmel host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before Atmel can be booted with a multi-platform kernel. This is currently planned for Linux-3.11. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the Atmel bus glue. In V4 (arnd): - reordered #include statements. - removed call to ehci_shutdown and the corresponding export In V3: - Detailed commit message added here about why this patch is required. - Replaced hcd_name string "ehci-atmel" to "atmel-ehci". - Inserted blank line in the Makefile to separate the EHCI drivers from the following non-EHCI drivers. - Exported ehci_shutdown symbol as it is needed by the Atmel driver. - Eliminated ehci_atmel_setup routine because hcd registers can be directly set in the ehci_atmel_drv_probe function. In V2: Resolved below compiler error. drivers/usb/host/ehci-atmel.c: In function 'ehci_atmel_drv_remove': drivers/usb/host/ehci-atmel.c:167: error: implicit declaration of function 'ehci_shutdown' Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02 18:24:02 +02:00
USB: EHCI: make ehci-s5p a separate driver Separate the Samsung S5P/EXYNOS host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before S5P/EXYNOS can be booted with a multi-platform kernel. We currently expect those to get merged for 3.10. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the s5p bus glue. In V4 (arnd) - revert some of the pointless changes. - fix allocation of s5p specific data structure. In V3: - Detailed commit message added here, why this patch is required. - MODULE_LICENSE is GPL v2. - Added .extra_priv_size to eliminate the separate allocation of the s5p_ehci_hcd structure and removed .reset function pointer initialization. - Arranged #include's in alphabetical order. - After using extra_priv_size initialization, struct usb_hcd *hcd is redundant and can be removed from the probe function. - Eliminated s5p_ehci_phy_enable,contents of statements moved into the s5p_ehci_probe - Eliminated s5p_ehci_phy_disable, contents of statements moved into the s5p_ehci_remove. In V2: - Tegra patch related changes removed from this patch. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02 18:24:01 +02:00
USB: EHCI: make ehci-orion a separate driver Separate the Orion host controller driver from ehci-hcd host code into its own driver module because of following reason. With the multiplatform changes in arm-soc tree, it becomes possible to enable the mvebu platform (which uses ehci-orion) at the same time as other platforms that require a conflicting EHCI bus glue. At the moment, this results in a warning like drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable] and an ehci driver that only works on one of them. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the orion bus glue. An earlier version of this patch was included in 3.9 but caused a regression there, which has subsequently been fixed. While we are here, use the opportunity to disabiguate the two Marvell EHCI controller implementations in Kconfig. In V4 (arnd): - Improve Kconfig text In V3: - More detail provided in commit message regarding this patch. - Replaced hcd_name string "ehci-orion" into "orion-ehci". - MODULE_LICENSE is GPL v2. - In ehci_init_driver calling second argument passed as NULL instead of ehci_orion_overrides because ehci_orion_overrides is removed. In V2: - Tegra patch related changes removed from this patch. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02 18:23:59 +02:00
USB: EHCI: make ehci-orion a separate driver Separate the Orion host controller driver from ehci-hcd host code into its own driver module because of following reason. With the multiplatform changes in arm-soc tree, it becomes possible to enable the mvebu platform (which uses ehci-orion) at the same time as other platforms that require a conflicting EHCI bus glue. At the moment, this results in a warning like drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable] and an ehci driver that only works on one of them. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the orion bus glue. An earlier version of this patch was included in 3.9 but caused a regression there, which has subsequently been fixed. While we are here, use the opportunity to disabiguate the two Marvell EHCI controller implementations in Kconfig. In V4 (arnd): - Improve Kconfig text In V3: - More detail provided in commit message regarding this patch. - Replaced hcd_name string "ehci-orion" into "orion-ehci". - MODULE_LICENSE is GPL v2. - In ehci_init_driver calling second argument passed as NULL instead of ehci_orion_overrides because ehci_orion_overrides is removed. In V2: - Tegra patch related changes removed from this patch. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02 18:23:59 +02:00
USB: OHCI: make ohci-pci a separate driver This patch splits the PCI portion of ohci-hcd out into its own separate driver module, called ohci-pci. The major point of difficulty lies in ohci-pci's many vendor- and device-specific workarounds. Some of them have to be applied before calling ohci_start() some after, which necessitates a fair amount of code motion. The other platform drivers require much smaller changes. The complete sb800_prefetch() function moved to ohci-q.c,because its only related to ohci-pci driver. USB_OHCI_HCD_PCI symbol no longer dependence on STB03xxx, PPC_MPC52xx and USB_OHCI_HCD_PPC_OF that's what removed. V2: - few specific content of pci related code in ohci_pci_start function has been moved to ohci_pci_reset and rest of the generic code is written in ohci_start of ohci-hcd.c file. V3: - ohci_restart() has been called in ohci_pci_reset() function for to reset the ohci pci. V4: -sb800_prefetch() moved to ohci-q.c,because its only related to ohci-pci. -no longer _creating_ CONFIG_USB_OHCI_PCI,creating CONFIG_USB_OHCI_HCD_PCI. -overrides renamed with pci_override,its giving proper meaning. V5: -sb800_prefetch() moved to pci-quirks.c,because its only related to pci. V6: -sb800_prefetch() function has been moved to pci-quirks.c made as separate patch in 2/3. -Most of the generic ohci pci changes moved in 2/3 patch,now this is complete ohci-pci separation patch. V7: -Unrelated include file has been removed from ohci.h file. V8: -USB_OHCI_HCD_PCI symbol does not dependence on STB03xxx, PPC_MPC52xx and USB_OHCI_HCD_PPC_OF. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-28 18:34:51 +05:30
USB: OHCI: make ohci-pci a separate driver This patch splits the PCI portion of ohci-hcd out into its own separate driver module, called ohci-pci. The major point of difficulty lies in ohci-pci's many vendor- and device-specific workarounds. Some of them have to be applied before calling ohci_start() some after, which necessitates a fair amount of code motion. The other platform drivers require much smaller changes. The complete sb800_prefetch() function moved to ohci-q.c,because its only related to ohci-pci driver. USB_OHCI_HCD_PCI symbol no longer dependence on STB03xxx, PPC_MPC52xx and USB_OHCI_HCD_PPC_OF that's what removed. V2: - few specific content of pci related code in ohci_pci_start function has been moved to ohci_pci_reset and rest of the generic code is written in ohci_start of ohci-hcd.c file. V3: - ohci_restart() has been called in ohci_pci_reset() function for to reset the ohci pci. V4: -sb800_prefetch() moved to ohci-q.c,because its only related to ohci-pci. -no longer _creating_ CONFIG_USB_OHCI_PCI,creating CONFIG_USB_OHCI_HCD_PCI. -overrides renamed with pci_override,its giving proper meaning. V5: -sb800_prefetch() moved to pci-quirks.c,because its only related to pci. V6: -sb800_prefetch() function has been moved to pci-quirks.c made as separate patch in 2/3. -Most of the generic ohci pci changes moved in 2/3 patch,now this is complete ohci-pci separation patch. V7: -Unrelated include file has been removed from ohci.h file. V8: -USB_OHCI_HCD_PCI symbol does not dependence on STB03xxx, PPC_MPC52xx and USB_OHCI_HCD_PPC_OF. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-28 18:34:51 +05:30
usb: add HAS_IOMEM dependency to USB_SL811_HCD CC drivers/usb/host/xhci-mtk.o drivers/usb/host/xhci-mtk.c:135:12: warning: ‘xhci_mtk_host_disable’ defined but not used [-Wunused-function] static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk) ^ drivers/usb/host/xhci-mtk.c:313:13: warning: ‘usb_wakeup_enable’ defined but not used [-Wunused-function] static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk) ^ drivers/usb/host/xhci-mtk.c:321:13: warning: ‘usb_wakeup_disable’ defined but not used [-Wunused-function] static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk) ^ CC drivers/usb/host/sl811-hcd.o drivers/usb/host/sl811-hcd.c: In function ‘sl811h_remove’: drivers/usb/host/sl811-hcd.c:1607:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(sl811->data_reg); ^ drivers/usb/host/sl811-hcd.c: In function ‘sl811h_probe’: drivers/usb/host/sl811-hcd.c:1669:3: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] addr_reg = ioremap(addr->start, 1); ^ drivers/usb/host/sl811-hcd.c:1669:12: warning: assignment makes pointer from integer without a cast [enabled by default] addr_reg = ioremap(addr->start, 1); ^ drivers/usb/host/sl811-hcd.c:1675:12: warning: assignment makes pointer from integer without a cast [enabled by default] data_reg = ioremap(data->start, 1); ^ Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-10 15:29:43 +01:00
uwb & wusb & usb wireless controllers: fix kconfig error & build errors Fix kconfig warnings and build errors in UWB/WUSB/USB_HWA etc. by making all of these related symbols depend on UWB. warning: (USB_WHCI_HCD && USB_HWA_HCD) selects USB_WUSB which has unmet direct dependencies (USB_SUPPORT && EXPERIMENTAL && USB && PCI && UWB) warning: (USB_HWA_HCD) selects UWB_HWA which has unmet direct dependencies (UWB && USB) which lead to: ERROR: "uwb_rsv_establish" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_pal_register" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_get_usable_mas" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_destroy" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_radio_stop" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_terminate" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_pal_unregister" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_pal_init" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rc_reset_all" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_radio_start" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rsv_create" [drivers/usb/wusbcore/wusbcore.ko] undefined! ERROR: "uwb_rc_put" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "uwb_rc_get_by_grandpa" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "__umc_driver_register" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "umc_driver_unregister" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "whci_wait_for" [drivers/usb/host/whci/whci-hcd.ko] undefined! ERROR: "uwb_rc_get_by_grandpa" [drivers/usb/host/hwa-hc.ko] undefined! ERROR: "uwb_rc_put" [drivers/usb/host/hwa-hc.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-27 15:47:03 -08:00