linux/arch/mips/dec/setup.c

784 lines
24 KiB

MIPS: DEC: Restore bootmem reservation for firmware working memory area Fix a crash on DEC platforms starting with: VFS: Mounted root (nfs filesystem) on device 0:11. Freeing unused PROM memory: 124k freed BUG: Bad page state in process swapper pfn:00001 page:(ptrval) refcount:0 mapcount:-128 mapping:00000000 index:0x1 pfn:0x1 flags: 0x0() raw: 00000000 00000100 00000122 00000000 00000001 00000000 ffffff7f 00000000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.9.0-00858-g865c50e1d279 #1 Stack : 8065dc48 0000000b 8065d2b8 9bc27dcc 80645bfc 9bc259a4 806a1b97 80703124 80710000 8064a900 00000001 80099574 806b116c 1000ec00 9bc27d88 806a6f30 00000000 00000000 80645bfc 00000000 31232039 80706ba4 2e392e35 8039f348 2d383538 00000070 0000000a 35363867 00000000 806c2830 80710000 806b0000 80710000 8064a900 00000001 81000000 00000000 00000000 8035af2c 80700000 ... Call Trace: [<8004bc5c>] show_stack+0x34/0x104 [<8015675c>] bad_page+0xfc/0x128 [<80157714>] free_pcppages_bulk+0x1f4/0x5dc [<801591cc>] free_unref_page+0xc0/0x130 [<8015cb04>] free_reserved_area+0x144/0x1d8 [<805abd78>] kernel_init+0x20/0x100 [<80046070>] ret_from_kernel_thread+0x14/0x1c Disabling lock debugging due to kernel taint caused by an attempt to free bootmem space that as from commit b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") has not been anymore reserved due to the removal of generic MIPS arch code that used to reserve all the memory from the beginning of RAM up to the kernel load address. This memory does need to be reserved on DEC platforms however as it is used by REX firmware as working area, as per the TURBOchannel firmware specification[1]: Table 2-2 REX Memory Regions ------------------------------------------------------------------------- Starting Ending Region Address Address Use ------------------------------------------------------------------------- 0 0xa0000000 0xa000ffff Restart block, exception vectors, REX stack and bss 1 0xa0010000 0xa0017fff Keyboard or tty drivers 2 0xa0018000 0xa001f3ff 1) CRT driver 3 0xa0020000 0xa002ffff boot, cnfg, init and t objects 4 0xa0020000 0xa002ffff 64KB scratch space ------------------------------------------------------------------------- 1) Note that the last 3 Kbytes of region 2 are reserved for backward compatibility with previous system software. ------------------------------------------------------------------------- (this table uses KSEG2 unmapped virtual addresses, which in the MIPS architecture are offset from physical addresses by a fixed value of 0xa0000000 and therefore the regions referred do correspond to the beginning of the physical address space) and we call into the firmware on several occasions throughout the bootstrap process. It is believed that pre-REX firmware used with non-TURBOchannel DEC platforms has the same requirements, as hinted by note #1 cited. Recreate the discarded reservation then, in DEC platform code, removing the crash. References: [1] "TURBOchannel Firmware Specification", On-line version, EK-TCAAD-FS-004, Digital Equipment Corporation, January 1993, Chapter 2 "System Module Firmware", p. 2-5 Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-10-14 22:34:56 +01:00
MIPS: Audit and remove any unnecessary uses of module.h Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some code where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace/add as needed. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Build coverage of all the mips defconfigs revealed the module.h header was masking a couple of implicit include instances, so we add the appropriate headers there. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15131/ [james.hogan@imgtec.com: Preserve sort order where it already exists] Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-01-28 21:05:57 -05:00
MIPS: DEC: Restore bootmem reservation for firmware working memory area Fix a crash on DEC platforms starting with: VFS: Mounted root (nfs filesystem) on device 0:11. Freeing unused PROM memory: 124k freed BUG: Bad page state in process swapper pfn:00001 page:(ptrval) refcount:0 mapcount:-128 mapping:00000000 index:0x1 pfn:0x1 flags: 0x0() raw: 00000000 00000100 00000122 00000000 00000001 00000000 ffffff7f 00000000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.9.0-00858-g865c50e1d279 #1 Stack : 8065dc48 0000000b 8065d2b8 9bc27dcc 80645bfc 9bc259a4 806a1b97 80703124 80710000 8064a900 00000001 80099574 806b116c 1000ec00 9bc27d88 806a6f30 00000000 00000000 80645bfc 00000000 31232039 80706ba4 2e392e35 8039f348 2d383538 00000070 0000000a 35363867 00000000 806c2830 80710000 806b0000 80710000 8064a900 00000001 81000000 00000000 00000000 8035af2c 80700000 ... Call Trace: [<8004bc5c>] show_stack+0x34/0x104 [<8015675c>] bad_page+0xfc/0x128 [<80157714>] free_pcppages_bulk+0x1f4/0x5dc [<801591cc>] free_unref_page+0xc0/0x130 [<8015cb04>] free_reserved_area+0x144/0x1d8 [<805abd78>] kernel_init+0x20/0x100 [<80046070>] ret_from_kernel_thread+0x14/0x1c Disabling lock debugging due to kernel taint caused by an attempt to free bootmem space that as from commit b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") has not been anymore reserved due to the removal of generic MIPS arch code that used to reserve all the memory from the beginning of RAM up to the kernel load address. This memory does need to be reserved on DEC platforms however as it is used by REX firmware as working area, as per the TURBOchannel firmware specification[1]: Table 2-2 REX Memory Regions ------------------------------------------------------------------------- Starting Ending Region Address Address Use ------------------------------------------------------------------------- 0 0xa0000000 0xa000ffff Restart block, exception vectors, REX stack and bss 1 0xa0010000 0xa0017fff Keyboard or tty drivers 2 0xa0018000 0xa001f3ff 1) CRT driver 3 0xa0020000 0xa002ffff boot, cnfg, init and t objects 4 0xa0020000 0xa002ffff 64KB scratch space ------------------------------------------------------------------------- 1) Note that the last 3 Kbytes of region 2 are reserved for backward compatibility with previous system software. ------------------------------------------------------------------------- (this table uses KSEG2 unmapped virtual addresses, which in the MIPS architecture are offset from physical addresses by a fixed value of 0xa0000000 and therefore the regions referred do correspond to the beginning of the physical address space) and we call into the firmware on several occasions throughout the bootstrap process. It is believed that pre-REX firmware used with non-TURBOchannel DEC platforms has the same requirements, as hinted by note #1 cited. Recreate the discarded reservation then, in DEC platform code, removing the crash. References: [1] "TURBOchannel Firmware Specification", On-line version, EK-TCAAD-FS-004, Digital Equipment Corporation, January 1993, Chapter 2 "System Module Firmware", p. 2-5 Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-10-14 22:34:56 +01:00
MIPS: DEC: Restore bootmem reservation for firmware working memory area Fix a crash on DEC platforms starting with: VFS: Mounted root (nfs filesystem) on device 0:11. Freeing unused PROM memory: 124k freed BUG: Bad page state in process swapper pfn:00001 page:(ptrval) refcount:0 mapcount:-128 mapping:00000000 index:0x1 pfn:0x1 flags: 0x0() raw: 00000000 00000100 00000122 00000000 00000001 00000000 ffffff7f 00000000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.9.0-00858-g865c50e1d279 #1 Stack : 8065dc48 0000000b 8065d2b8 9bc27dcc 80645bfc 9bc259a4 806a1b97 80703124 80710000 8064a900 00000001 80099574 806b116c 1000ec00 9bc27d88 806a6f30 00000000 00000000 80645bfc 00000000 31232039 80706ba4 2e392e35 8039f348 2d383538 00000070 0000000a 35363867 00000000 806c2830 80710000 806b0000 80710000 8064a900 00000001 81000000 00000000 00000000 8035af2c 80700000 ... Call Trace: [<8004bc5c>] show_stack+0x34/0x104 [<8015675c>] bad_page+0xfc/0x128 [<80157714>] free_pcppages_bulk+0x1f4/0x5dc [<801591cc>] free_unref_page+0xc0/0x130 [<8015cb04>] free_reserved_area+0x144/0x1d8 [<805abd78>] kernel_init+0x20/0x100 [<80046070>] ret_from_kernel_thread+0x14/0x1c Disabling lock debugging due to kernel taint caused by an attempt to free bootmem space that as from commit b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") has not been anymore reserved due to the removal of generic MIPS arch code that used to reserve all the memory from the beginning of RAM up to the kernel load address. This memory does need to be reserved on DEC platforms however as it is used by REX firmware as working area, as per the TURBOchannel firmware specification[1]: Table 2-2 REX Memory Regions ------------------------------------------------------------------------- Starting Ending Region Address Address Use ------------------------------------------------------------------------- 0 0xa0000000 0xa000ffff Restart block, exception vectors, REX stack and bss 1 0xa0010000 0xa0017fff Keyboard or tty drivers 2 0xa0018000 0xa001f3ff 1) CRT driver 3 0xa0020000 0xa002ffff boot, cnfg, init and t objects 4 0xa0020000 0xa002ffff 64KB scratch space ------------------------------------------------------------------------- 1) Note that the last 3 Kbytes of region 2 are reserved for backward compatibility with previous system software. ------------------------------------------------------------------------- (this table uses KSEG2 unmapped virtual addresses, which in the MIPS architecture are offset from physical addresses by a fixed value of 0xa0000000 and therefore the regions referred do correspond to the beginning of the physical address space) and we call into the firmware on several occasions throughout the bootstrap process. It is believed that pre-REX firmware used with non-TURBOchannel DEC platforms has the same requirements, as hinted by note #1 cited. Recreate the discarded reservation then, in DEC platform code, removing the crash. References: [1] "TURBOchannel Firmware Specification", On-line version, EK-TCAAD-FS-004, Digital Equipment Corporation, January 1993, Chapter 2 "System Module Firmware", p. 2-5 Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-10-14 22:34:56 +01:00
MIPS: DEC: Restore bootmem reservation for firmware working memory area Fix a crash on DEC platforms starting with: VFS: Mounted root (nfs filesystem) on device 0:11. Freeing unused PROM memory: 124k freed BUG: Bad page state in process swapper pfn:00001 page:(ptrval) refcount:0 mapcount:-128 mapping:00000000 index:0x1 pfn:0x1 flags: 0x0() raw: 00000000 00000100 00000122 00000000 00000001 00000000 ffffff7f 00000000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.9.0-00858-g865c50e1d279 #1 Stack : 8065dc48 0000000b 8065d2b8 9bc27dcc 80645bfc 9bc259a4 806a1b97 80703124 80710000 8064a900 00000001 80099574 806b116c 1000ec00 9bc27d88 806a6f30 00000000 00000000 80645bfc 00000000 31232039 80706ba4 2e392e35 8039f348 2d383538 00000070 0000000a 35363867 00000000 806c2830 80710000 806b0000 80710000 8064a900 00000001 81000000 00000000 00000000 8035af2c 80700000 ... Call Trace: [<8004bc5c>] show_stack+0x34/0x104 [<8015675c>] bad_page+0xfc/0x128 [<80157714>] free_pcppages_bulk+0x1f4/0x5dc [<801591cc>] free_unref_page+0xc0/0x130 [<8015cb04>] free_reserved_area+0x144/0x1d8 [<805abd78>] kernel_init+0x20/0x100 [<80046070>] ret_from_kernel_thread+0x14/0x1c Disabling lock debugging due to kernel taint caused by an attempt to free bootmem space that as from commit b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") has not been anymore reserved due to the removal of generic MIPS arch code that used to reserve all the memory from the beginning of RAM up to the kernel load address. This memory does need to be reserved on DEC platforms however as it is used by REX firmware as working area, as per the TURBOchannel firmware specification[1]: Table 2-2 REX Memory Regions ------------------------------------------------------------------------- Starting Ending Region Address Address Use ------------------------------------------------------------------------- 0 0xa0000000 0xa000ffff Restart block, exception vectors, REX stack and bss 1 0xa0010000 0xa0017fff Keyboard or tty drivers 2 0xa0018000 0xa001f3ff 1) CRT driver 3 0xa0020000 0xa002ffff boot, cnfg, init and t objects 4 0xa0020000 0xa002ffff 64KB scratch space ------------------------------------------------------------------------- 1) Note that the last 3 Kbytes of region 2 are reserved for backward compatibility with previous system software. ------------------------------------------------------------------------- (this table uses KSEG2 unmapped virtual addresses, which in the MIPS architecture are offset from physical addresses by a fixed value of 0xa0000000 and therefore the regions referred do correspond to the beginning of the physical address space) and we call into the firmware on several occasions throughout the bootstrap process. It is believed that pre-REX firmware used with non-TURBOchannel DEC platforms has the same requirements, as hinted by note #1 cited. Recreate the discarded reservation then, in DEC platform code, removing the crash. References: [1] "TURBOchannel Firmware Specification", On-line version, EK-TCAAD-FS-004, Digital Equipment Corporation, January 1993, Chapter 2 "System Module Firmware", p. 2-5 Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-10-14 22:34:56 +01:00
MIPS: DEC: Restore bootmem reservation for firmware working memory area Fix a crash on DEC platforms starting with: VFS: Mounted root (nfs filesystem) on device 0:11. Freeing unused PROM memory: 124k freed BUG: Bad page state in process swapper pfn:00001 page:(ptrval) refcount:0 mapcount:-128 mapping:00000000 index:0x1 pfn:0x1 flags: 0x0() raw: 00000000 00000100 00000122 00000000 00000001 00000000 ffffff7f 00000000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.9.0-00858-g865c50e1d279 #1 Stack : 8065dc48 0000000b 8065d2b8 9bc27dcc 80645bfc 9bc259a4 806a1b97 80703124 80710000 8064a900 00000001 80099574 806b116c 1000ec00 9bc27d88 806a6f30 00000000 00000000 80645bfc 00000000 31232039 80706ba4 2e392e35 8039f348 2d383538 00000070 0000000a 35363867 00000000 806c2830 80710000 806b0000 80710000 8064a900 00000001 81000000 00000000 00000000 8035af2c 80700000 ... Call Trace: [<8004bc5c>] show_stack+0x34/0x104 [<8015675c>] bad_page+0xfc/0x128 [<80157714>] free_pcppages_bulk+0x1f4/0x5dc [<801591cc>] free_unref_page+0xc0/0x130 [<8015cb04>] free_reserved_area+0x144/0x1d8 [<805abd78>] kernel_init+0x20/0x100 [<80046070>] ret_from_kernel_thread+0x14/0x1c Disabling lock debugging due to kernel taint caused by an attempt to free bootmem space that as from commit b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") has not been anymore reserved due to the removal of generic MIPS arch code that used to reserve all the memory from the beginning of RAM up to the kernel load address. This memory does need to be reserved on DEC platforms however as it is used by REX firmware as working area, as per the TURBOchannel firmware specification[1]: Table 2-2 REX Memory Regions ------------------------------------------------------------------------- Starting Ending Region Address Address Use ------------------------------------------------------------------------- 0 0xa0000000 0xa000ffff Restart block, exception vectors, REX stack and bss 1 0xa0010000 0xa0017fff Keyboard or tty drivers 2 0xa0018000 0xa001f3ff 1) CRT driver 3 0xa0020000 0xa002ffff boot, cnfg, init and t objects 4 0xa0020000 0xa002ffff 64KB scratch space ------------------------------------------------------------------------- 1) Note that the last 3 Kbytes of region 2 are reserved for backward compatibility with previous system software. ------------------------------------------------------------------------- (this table uses KSEG2 unmapped virtual addresses, which in the MIPS architecture are offset from physical addresses by a fixed value of 0xa0000000 and therefore the regions referred do correspond to the beginning of the physical address space) and we call into the firmware on several occasions throughout the bootstrap process. It is believed that pre-REX firmware used with non-TURBOchannel DEC platforms has the same requirements, as hinted by note #1 cited. Recreate the discarded reservation then, in DEC platform code, removing the crash. References: [1] "TURBOchannel Firmware Specification", On-line version, EK-TCAAD-FS-004, Digital Equipment Corporation, January 1993, Chapter 2 "System Module Firmware", p. 2-5 Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-10-14 22:34:56 +01:00
MIPS: DEC: Restore bootmem reservation for firmware working memory area Fix a crash on DEC platforms starting with: VFS: Mounted root (nfs filesystem) on device 0:11. Freeing unused PROM memory: 124k freed BUG: Bad page state in process swapper pfn:00001 page:(ptrval) refcount:0 mapcount:-128 mapping:00000000 index:0x1 pfn:0x1 flags: 0x0() raw: 00000000 00000100 00000122 00000000 00000001 00000000 ffffff7f 00000000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.9.0-00858-g865c50e1d279 #1 Stack : 8065dc48 0000000b 8065d2b8 9bc27dcc 80645bfc 9bc259a4 806a1b97 80703124 80710000 8064a900 00000001 80099574 806b116c 1000ec00 9bc27d88 806a6f30 00000000 00000000 80645bfc 00000000 31232039 80706ba4 2e392e35 8039f348 2d383538 00000070 0000000a 35363867 00000000 806c2830 80710000 806b0000 80710000 8064a900 00000001 81000000 00000000 00000000 8035af2c 80700000 ... Call Trace: [<8004bc5c>] show_stack+0x34/0x104 [<8015675c>] bad_page+0xfc/0x128 [<80157714>] free_pcppages_bulk+0x1f4/0x5dc [<801591cc>] free_unref_page+0xc0/0x130 [<8015cb04>] free_reserved_area+0x144/0x1d8 [<805abd78>] kernel_init+0x20/0x100 [<80046070>] ret_from_kernel_thread+0x14/0x1c Disabling lock debugging due to kernel taint caused by an attempt to free bootmem space that as from commit b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") has not been anymore reserved due to the removal of generic MIPS arch code that used to reserve all the memory from the beginning of RAM up to the kernel load address. This memory does need to be reserved on DEC platforms however as it is used by REX firmware as working area, as per the TURBOchannel firmware specification[1]: Table 2-2 REX Memory Regions ------------------------------------------------------------------------- Starting Ending Region Address Address Use ------------------------------------------------------------------------- 0 0xa0000000 0xa000ffff Restart block, exception vectors, REX stack and bss 1 0xa0010000 0xa0017fff Keyboard or tty drivers 2 0xa0018000 0xa001f3ff 1) CRT driver 3 0xa0020000 0xa002ffff boot, cnfg, init and t objects 4 0xa0020000 0xa002ffff 64KB scratch space ------------------------------------------------------------------------- 1) Note that the last 3 Kbytes of region 2 are reserved for backward compatibility with previous system software. ------------------------------------------------------------------------- (this table uses KSEG2 unmapped virtual addresses, which in the MIPS architecture are offset from physical addresses by a fixed value of 0xa0000000 and therefore the regions referred do correspond to the beginning of the physical address space) and we call into the firmware on several occasions throughout the bootstrap process. It is believed that pre-REX firmware used with non-TURBOchannel DEC platforms has the same requirements, as hinted by note #1 cited. Recreate the discarded reservation then, in DEC platform code, removing the crash. References: [1] "TURBOchannel Firmware Specification", On-line version, EK-TCAAD-FS-004, Digital Equipment Corporation, January 1993, Chapter 2 "System Module Firmware", p. 2-5 Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Fixes: b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-10-14 22:34:56 +01:00