kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-20 18:15:29 +00:00
Code Issues Releases Packages Activity
linux/include/net/net_namespace.h

226 lines
4.8 KiB
Raw Normal View History

[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00
[NETNS]: Introduce a netns_core structure. There's already some stuff on the struct net, that should better be folded into netns_core structure. I'm making the per-proto inuse counter be per-net also, which is also a candidate for this, so introduce this structure and populate it a bit. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-31 19:41:14 -07:00
mib: add netns/mib.h file The only structure declared within is the netns_mib, which will carry all our mibs within. I didn't put the mibs in the existing netns_xxx structures to make it possible to mark this one as properly aligned and get in a separate "read-mostly" cache-line. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-18 04:01:24 -07:00
[NETNS]: struct net content re-work (v3) Recently David Miller and Herbert Xu pointed out that struct net becomes overbloated and un-maintainable. There are two solutions: - provide a pointer to a network subsystem definition from struct net. This costs an additional dereferrence - place sub-system definition into the structure itself. This will speedup run-time access at the cost of recompilation time The second approach looks better for us. Other sub-systems will follow. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 04:19:17 -08:00
[NETNS]: separate af_packet netns data Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 04:19:54 -08:00
[NETNS]: Add the netns_ipv4 struct The ipv4 will store its parameters inside this structure. This one is empty now, but it will be eventually filled. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-16 13:29:36 -08:00
[NETNS][IPV6]: Add ipv6 structure for netns. Like the ipv4 part, this patch adds an ipv6 structure in the net structure to aggregate the different resources to make ipv6 per namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-10 02:49:06 -08:00
[NETNS]: Add an empty netns_dccp structure on struct net. According to the overall struct net design, it will be filled with DCCP-related members. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-13 22:28:42 -07:00
[NETFILTER]: x_tables: per-netns xt_tables In fact all we want is per-netns set of rules, however doing that will unnecessary complicate routines such as ipt_hook()/ipt_do_table, so make full xt_table array per-netns. Every user stubbed with init_net for a while. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 04:02:13 -08:00
[NETNS]: struct net content re-work (v3) Recently David Miller and Herbert Xu pointed out that struct net becomes overbloated and un-maintainable. There are two solutions: - provide a pointer to a network subsystem definition from struct net. This costs an additional dereferrence - place sub-system definition into the structure itself. This will speedup run-time access at the cost of recompilation time The second approach looks better for us. Other sub-systems will follow. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 04:19:17 -08:00
[NET]: Make /proc/net per network namespace This patch makes /proc/net per network namespace. It modifies the global variables proc_net and proc_net_stat to be per network namespace. The proc_net file helpers are modified to take a network namespace argument, and all of their callers are fixed to pass &init_net for that argument. This ensures that all of the /proc/net files are only visible and usable in the initial network namespace until the code behind them has been updated to be handle multiple network namespaces. Making /proc/net per namespace is necessary as at least some files in /proc/net depend upon the set of network devices which is per network namespace, and even more files in /proc/net have contents that are relevant to a single network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 12:01:34 +02:00
[NET]: Make the loopback device per network namespace. This patch makes loopback_dev per network namespace. Adding code to create a different loopback device for each network namespace and adding the code to free a loopback device when a network namespace exits. This patch modifies all users the loopback_dev so they access it as init_net.loopback_dev, keeping all of the code compiling and working. A later pass will be needed to update the users to use something other than the initial network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 22:10:56 -07:00
[NET]: Make rtnetlink infrastructure network namespace aware (v3) After this patch none of the netlink callback support anything except the initial network namespace but the rtnetlink infrastructure now handles multiple network namespaces. Changes from v2: - IPv6 addrlabel processing Changes from v1: - no need for special rtnl_unlock handling - fixed IPv6 ndisc Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-19 22:26:51 -08:00
[UNIX]: Make the unix sysctl tables per-namespace This is the core. * add the ctl_table_header on the struct net; * make the unix_sysctl_register and _unregister clone the table; * moves calls to them into per-net init and exit callbacks; * move the .data pointer in the proper place. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-01 23:51:01 +11:00
[NETNS]: The generic per-net pointers. Add the elastic array of void * pointer to the struct net. The access rules are simple: 1. register the ops with register_pernet_gen_device to get the id of your private pointer 2. call net_assign_generic() to put the private data on the struct net (most preferably this should be done in the ->init callback of the ops registered) 3. do not store any private reference on the net_generic array; 4. do not change this pointer while the net is alive; 5. use the net_generic() to get the pointer. When adding a new pointer, I copy the old array, replace it with a new one and schedule the old for kfree after an RCU grace period. Since the net_generic explores the net->gen array inside rcu read section and once set the net->gen->ptr[x] pointer never changes, this grants us a safe access to generic pointers. Quoting Paul: "... RCU is protecting -only- the net_generic structure that net_generic() is traversing, and the [pointer] returned by net_generic() is protected by a reference counter in the upper-level struct net." Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-15 00:36:08 -07:00
[UNIX]: Make the unix sysctl tables per-namespace This is the core. * add the ctl_table_header on the struct net; * make the unix_sysctl_register and _unregister clone the table; * moves calls to them into per-net init and exit callbacks; * move the .data pointer in the proper place. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-01 23:51:01 +11:00
[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00
[NETNS]: Make netns refconting debug like a socket one. Make release_net/hold_net noop for performance-hungry people. This is a debug staff and should be used in the debug mode only. Add check for net != NULL in hold/release calls. This will be required later on. [ Added minor simplifications suggested by Brian Haley. -DaveM ] Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 01:58:04 -07:00
[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00
[NETNS]: Make netns refconting debug like a socket one. Make release_net/hold_net noop for performance-hungry people. This is a debug staff and should be used in the debug mode only. Add check for net != NULL in hold/release calls. This will be required later on. [ Added minor simplifications suggested by Brian Haley. -DaveM ] Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 01:58:04 -07:00
[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00
[NET]: Make /proc/net per network namespace This patch makes /proc/net per network namespace. It modifies the global variables proc_net and proc_net_stat to be per network namespace. The proc_net file helpers are modified to take a network namespace argument, and all of their callers are fixed to pass &init_net for that argument. This ensures that all of the /proc/net files are only visible and usable in the initial network namespace until the code behind them has been updated to be handle multiple network namespaces. Making /proc/net per namespace is necessary as at least some files in /proc/net depend upon the set of network devices which is per network namespace, and even more files in /proc/net have contents that are relevant to a single network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 12:01:34 +02:00
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 11:56:21 -07:00
[PATCH] beginning of sysctl cleanup - ctl_table_set New object: set of sysctls [currently - root and per-net-ns]. Contains: pointer to parent set, list of tables and "should I see this set?" method (->is_seen(set)). Current lists of tables are subsumed by that; net-ns contains such a beast. ->lookup() for ctl_table_root returns pointer to ctl_table_set instead of that to ->list of that ctl_table_set. [folded compile fixes by rdd for configs without sysctl] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-14 21:22:20 -04:00
[NET]: Implement the per network namespace sysctl infrastructure The user interface is: register_net_sysctl_table and unregister_net_sysctl_table. Very much like the current interface except there is a network namespace parameter. With this any sysctl registered with register_net_sysctl_table will only show up to tasks in the same network namespace. All other sysctls continue to be globally visible. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 23:55:42 +11:00
[NET]: Make the loopback device per network namespace. This patch makes loopback_dev per network namespace. Adding code to create a different loopback device for each network namespace and adding the code to free a loopback device when a network namespace exits. This patch modifies all users the loopback_dev so they access it as init_net.loopback_dev, keeping all of the code compiling and working. A later pass will be needed to update the users to use something other than the initial network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 22:10:56 -07:00
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 11:56:21 -07:00
[NET]: Make rtnetlink infrastructure network namespace aware (v3) After this patch none of the netlink callback support anything except the initial network namespace but the rtnetlink infrastructure now handles multiple network namespaces. Changes from v2: - IPv6 addrlabel processing Changes from v1: - no need for special rtnl_unlock handling - fixed IPv6 ndisc Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-19 22:26:51 -08:00
[NETNS]: Namespacing in the generic fib rules code. Move static rules_ops & rules_mod_lock to the struct net, register the pernet subsys to init them and enjoy the fact that the core rules infrastructure works in the namespace. Real IPv4 fib rules virtualization requires fib tables support in the namespace and will be done seriously later in the patchset. Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-10 03:20:28 -08:00
[NET]: Make rtnetlink infrastructure network namespace aware (v3) After this patch none of the netlink callback support anything except the initial network namespace but the rtnetlink infrastructure now handles multiple network namespaces. Changes from v2: - IPv6 addrlabel processing Changes from v1: - no need for special rtnl_unlock handling - fixed IPv6 ndisc Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-19 22:26:51 -08:00
[NET]: Make AF_PACKET handle multiple network namespaces This is done by making packet_sklist_lock and packet_sklist per network namespace and adding an additional filter condition on received packets to ensure they came from the proper network namespace. Changes from v1: - prohibit to call inet_dgram_ops.ioctl in other than init_net Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-19 22:28:35 -08:00
[NETNS]: Introduce a netns_core structure. There's already some stuff on the struct net, that should better be folded into netns_core structure. I'm making the per-proto inuse counter be per-net also, which is also a candidate for this, so introduce this structure and populate it a bit. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-31 19:41:14 -07:00
mib: add netns/mib.h file The only structure declared within is the netns_mib, which will carry all our mibs within. I didn't put the mibs in the existing netns_xxx structures to make it possible to mark this one as properly aligned and get in a separate "read-mostly" cache-line. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-18 04:01:24 -07:00
[NETNS]: separate af_packet netns data Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 04:19:54 -08:00
[NETNS]: struct net content re-work (v3) Recently David Miller and Herbert Xu pointed out that struct net becomes overbloated and un-maintainable. There are two solutions: - provide a pointer to a network subsystem definition from struct net. This costs an additional dereferrence - place sub-system definition into the structure itself. This will speedup run-time access at the cost of recompilation time The second approach looks better for us. Other sub-systems will follow. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 04:19:17 -08:00
[NETNS]: Add the netns_ipv4 struct The ipv4 will store its parameters inside this structure. This one is empty now, but it will be eventually filled. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-16 13:29:36 -08:00
[NETNS][IPV6]: Add ipv6 structure for netns. Like the ipv4 part, this patch adds an ipv6 structure in the net structure to aggregate the different resources to make ipv6 per namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-10 02:49:06 -08:00
[NETNS]: Add an empty netns_dccp structure on struct net. According to the overall struct net design, it will be filled with DCCP-related members. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-13 22:28:42 -07:00
[NETFILTER]: x_tables: per-netns xt_tables In fact all we want is per-netns set of rules, however doing that will unnecessary complicate routines such as ipt_hook()/ipt_do_table, so make full xt_table array per-netns. Every user stubbed with init_net for a while. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 04:02:13 -08:00
[NETNS]: The generic per-net pointers. Add the elastic array of void * pointer to the struct net. The access rules are simple: 1. register the ops with register_pernet_gen_device to get the id of your private pointer 2. call net_assign_generic() to put the private data on the struct net (most preferably this should be done in the ->init callback of the ops registered) 3. do not store any private reference on the net_generic array; 4. do not change this pointer while the net is alive; 5. use the net_generic() to get the pointer. When adding a new pointer, I copy the old array, replace it with a new one and schedule the old for kfree after an RCU grace period. Since the net_generic explores the net->gen array inside rcu read section and once set the net->gen->ptr[x] pointer never changes, this grants us a safe access to generic pointers. Quoting Paul: "... RCU is protecting -only- the net_generic structure that net_generic() is traversing, and the [pointer] returned by net_generic() is protected by a reference counter in the upper-level struct net." Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-15 00:36:08 -07:00
[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00
[NETNS]: Merge ifdef CONFIG_NET in include/net/net_namespace.h. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02 00:09:29 -07:00
[NETNS]: Do not include net/net_namespace.h from seq_file.h Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02 00:10:28 -07:00
[NETNS]: Fix allnoconfig compilation error. When CONFIG_NET=no, init_net is unresolved because net_namespace.c is not compiled and the include pull init_net definition. This problem was very similar with the ipc namespace where the kernel can be compiled with SYSV ipc out. This patch fix that defining a macro which simply remove init_net initialization from nsproxy namespace aggregator. Compiled and booted on qemu-i386 with CONFIG_NET=no and CONFIG_NET=yes. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-13 09:16:29 +02:00
[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00
[NETNS]: Declare init_net even without CONFIG_NET defined. This does not look good, but there is no other choice. The compilation without CONFIG_NET is broken and can not be fixed with ease. After that there is no need for the following commits: 1567ca7eec7664b8be3b07755ac59dc1b1ec76cb 3edf8fa5ccf10688a9280b5cbca8ed3947c42866 2d38f9a4f8d2ebdc799f03eecf82345825495711 Revert them. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-03 13:04:33 -07:00
[NETNS]: Fix allnoconfig compilation error. When CONFIG_NET=no, init_net is unresolved because net_namespace.c is not compiled and the include pull init_net definition. This problem was very similar with the ipc namespace where the kernel can be compiled with SYSV ipc out. This patch fix that defining a macro which simply remove init_net initialization from nsproxy namespace aggregator. Compiled and booted on qemu-i386 with CONFIG_NET=no and CONFIG_NET=yes. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-13 09:16:29 +02:00
[NET]: Add network namespace clone & unshare support. This patch allows you to create a new network namespace using sys_clone, or sys_unshare. As the network namespace is still experimental and under development clone and unshare support is only made available when CONFIG_NET_NS is selected at compile time. As this patch introduces network namespace support into code paths that exist when the CONFIG_NET is not selected there are a few additions made to net_namespace.h to allow a few more functions to be used when the networking stack is not compiled in. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 22:04:26 -07:00
[NETNS]: Merge ifdef CONFIG_NET in include/net/net_namespace.h. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02 00:09:29 -07:00
[NET]: Add network namespace clone & unshare support. This patch allows you to create a new network namespace using sys_clone, or sys_unshare. As the network namespace is still experimental and under development clone and unshare support is only made available when CONFIG_NET_NS is selected at compile time. As this patch introduces network namespace support into code paths that exist when the CONFIG_NET is not selected there are a few additions made to net_namespace.h to allow a few more functions to be used when the networking stack is not compiled in. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 22:04:26 -07:00
[NETNS]: Merge ifdef CONFIG_NET in include/net/net_namespace.h. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-02 00:09:29 -07:00
[NET]: Add network namespace clone & unshare support. This patch allows you to create a new network namespace using sys_clone, or sys_unshare. As the network namespace is still experimental and under development clone and unshare support is only made available when CONFIG_NET_NS is selected at compile time. As this patch introduces network namespace support into code paths that exist when the CONFIG_NET is not selected there are a few additions made to net_namespace.h to allow a few more functions to be used when the networking stack is not compiled in. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 22:04:26 -07:00
[NET]: Relax the reference counting of init_net_ns When the CONFIG_NET_NS is n there's no need in refcounting the initial net namespace. So relax this code by making a stupid stubs for the "n" case. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 00:43:49 -07:00
[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00
netns: Don't receive new packets in a dead network namespace. Alexey Dobriyan <adobriyan@gmail.com> writes: > Subject: ICMP sockets destruction vs ICMP packets oops > After icmp_sk_exit() nuked ICMP sockets, we get an interrupt. > icmp_reply() wants ICMP socket. > > Steps to reproduce: > > launch shell in new netns > move real NIC to netns > setup routing > ping -i 0 > exit from shell > > BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 > IP: [<ffffffff803fce17>] icmp_sk+0x17/0x30 > PGD 17f3cd067 PUD 17f3ce067 PMD 0 > Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC > CPU 0 > Modules linked in: usblp usbcore > Pid: 0, comm: swapper Not tainted 2.6.26-rc6-netns-ct #4 > RIP: 0010:[<ffffffff803fce17>] [<ffffffff803fce17>] icmp_sk+0x17/0x30 > RSP: 0018:ffffffff8057fc30 EFLAGS: 00010286 > RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff81017c7db900 > RDX: 0000000000000034 RSI: ffff81017c7db900 RDI: ffff81017dc41800 > RBP: ffffffff8057fc40 R08: 0000000000000001 R09: 000000000000a815 > R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff8057fd28 > R13: ffffffff8057fd00 R14: ffff81017c7db938 R15: ffff81017dc41800 > FS: 0000000000000000(0000) GS:ffffffff80525000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b > CR2: 0000000000000000 CR3: 000000017fcda000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process swapper (pid: 0, threadinfo ffffffff8053a000, task ffffffff804fa4a0) > Stack: 0000000000000000 ffff81017c7db900 ffffffff8057fcf0 ffffffff803fcfe4 > ffffffff804faa38 0000000000000246 0000000000005a40 0000000000000246 > 000000000001ffff ffff81017dd68dc0 0000000000005a40 0000000055342436 > Call Trace: > <IRQ> [<ffffffff803fcfe4>] icmp_reply+0x44/0x1e0 > [<ffffffff803d3a0a>] ? ip_route_input+0x23a/0x1360 > [<ffffffff803fd645>] icmp_echo+0x65/0x70 > [<ffffffff803fd300>] icmp_rcv+0x180/0x1b0 > [<ffffffff803d6d84>] ip_local_deliver+0xf4/0x1f0 > [<ffffffff803d71bb>] ip_rcv+0x33b/0x650 > [<ffffffff803bb16a>] netif_receive_skb+0x27a/0x340 > [<ffffffff803be57d>] process_backlog+0x9d/0x100 > [<ffffffff803bdd4d>] net_rx_action+0x18d/0x250 > [<ffffffff80237be5>] __do_softirq+0x75/0x100 > [<ffffffff8020c97c>] call_softirq+0x1c/0x30 > [<ffffffff8020f085>] do_softirq+0x65/0xa0 > [<ffffffff80237af7>] irq_exit+0x97/0xa0 > [<ffffffff8020f198>] do_IRQ+0xa8/0x130 > [<ffffffff80212ee0>] ? mwait_idle+0x0/0x60 > [<ffffffff8020bc46>] ret_from_intr+0x0/0xf > <EOI> [<ffffffff80212f2c>] ? mwait_idle+0x4c/0x60 > [<ffffffff80212f23>] ? mwait_idle+0x43/0x60 > [<ffffffff8020a217>] ? cpu_idle+0x57/0xa0 > [<ffffffff8040f380>] ? rest_init+0x70/0x80 > Code: 10 5b 41 5c 41 5d 41 5e c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 > 48 83 ec 08 48 8b 9f 78 01 00 00 e8 2b c7 f1 ff 89 c0 <48> 8b 04 c3 48 83 c4 08 > 5b c9 c3 66 66 66 66 66 2e 0f 1f 84 00 > RIP [<ffffffff803fce17>] icmp_sk+0x17/0x30 > RSP <ffffffff8057fc30> > CR2: 0000000000000000 > ---[ end trace ea161157b76b33e8 ]--- > Kernel panic - not syncing: Aiee, killing interrupt handler! Receiving packets while we are cleaning up a network namespace is a racy proposition. It is possible when the packet arrives that we have removed some but not all of the state we need to fully process it. We have the choice of either playing wack-a-mole with the cleanup routines or simply dropping packets when we don't have a network namespace to handle them. Since the check looks inexpensive in netif_receive_skb let's just drop the incoming packets. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-20 22:16:51 -07:00
[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00
[NET]: Fix race when opening a proc file while a network namespace is exiting. The problem: proc_net files remember which network namespace the are against but do not remember hold a reference count (as that would pin the network namespace). So we currently have a small window where the reference count on a network namespace may be incremented when opening a /proc file when it has already gone to zero. To fix this introduce maybe_get_net and get_proc_net. maybe_get_net increments the network namespace reference count only if it is greater then zero, ensuring we don't increment a reference count after it has gone to zero. get_proc_net handles all of the magic to go from a proc inode to the network namespace instance and call maybe_get_net on it. PROC_NET the old accessor is removed so that we don't get confused and use the wrong helper function. Then I fix up the callers to use get_proc_net and handle the case case where get_proc_net returns NULL. In that case I return -ENXIO because effectively the network namespace has already gone away so the files we are trying to access don't exist anymore. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-13 09:18:57 +02:00
[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00
[NET] NETNS: Omit namespace comparision without CONFIG_NET_NS. Introduce an inline net_eq() to compare two namespaces. Without CONFIG_NET_NS, since no namespace other than &init_net exists, it is always 1. We do not need to convert 1) inline vs inline and 2) inline vs &init_net comparisons. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26 03:57:35 +09:00
[NET]: Relax the reference counting of init_net_ns When the CONFIG_NET_NS is n there's no need in refcounting the initial net namespace. So relax this code by making a stupid stubs for the "n" case. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 00:43:49 -07:00
netns: Don't receive new packets in a dead network namespace. Alexey Dobriyan <adobriyan@gmail.com> writes: > Subject: ICMP sockets destruction vs ICMP packets oops > After icmp_sk_exit() nuked ICMP sockets, we get an interrupt. > icmp_reply() wants ICMP socket. > > Steps to reproduce: > > launch shell in new netns > move real NIC to netns > setup routing > ping -i 0 > exit from shell > > BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 > IP: [<ffffffff803fce17>] icmp_sk+0x17/0x30 > PGD 17f3cd067 PUD 17f3ce067 PMD 0 > Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC > CPU 0 > Modules linked in: usblp usbcore > Pid: 0, comm: swapper Not tainted 2.6.26-rc6-netns-ct #4 > RIP: 0010:[<ffffffff803fce17>] [<ffffffff803fce17>] icmp_sk+0x17/0x30 > RSP: 0018:ffffffff8057fc30 EFLAGS: 00010286 > RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff81017c7db900 > RDX: 0000000000000034 RSI: ffff81017c7db900 RDI: ffff81017dc41800 > RBP: ffffffff8057fc40 R08: 0000000000000001 R09: 000000000000a815 > R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff8057fd28 > R13: ffffffff8057fd00 R14: ffff81017c7db938 R15: ffff81017dc41800 > FS: 0000000000000000(0000) GS:ffffffff80525000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b > CR2: 0000000000000000 CR3: 000000017fcda000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process swapper (pid: 0, threadinfo ffffffff8053a000, task ffffffff804fa4a0) > Stack: 0000000000000000 ffff81017c7db900 ffffffff8057fcf0 ffffffff803fcfe4 > ffffffff804faa38 0000000000000246 0000000000005a40 0000000000000246 > 000000000001ffff ffff81017dd68dc0 0000000000005a40 0000000055342436 > Call Trace: > <IRQ> [<ffffffff803fcfe4>] icmp_reply+0x44/0x1e0 > [<ffffffff803d3a0a>] ? ip_route_input+0x23a/0x1360 > [<ffffffff803fd645>] icmp_echo+0x65/0x70 > [<ffffffff803fd300>] icmp_rcv+0x180/0x1b0 > [<ffffffff803d6d84>] ip_local_deliver+0xf4/0x1f0 > [<ffffffff803d71bb>] ip_rcv+0x33b/0x650 > [<ffffffff803bb16a>] netif_receive_skb+0x27a/0x340 > [<ffffffff803be57d>] process_backlog+0x9d/0x100 > [<ffffffff803bdd4d>] net_rx_action+0x18d/0x250 > [<ffffffff80237be5>] __do_softirq+0x75/0x100 > [<ffffffff8020c97c>] call_softirq+0x1c/0x30 > [<ffffffff8020f085>] do_softirq+0x65/0xa0 > [<ffffffff80237af7>] irq_exit+0x97/0xa0 > [<ffffffff8020f198>] do_IRQ+0xa8/0x130 > [<ffffffff80212ee0>] ? mwait_idle+0x0/0x60 > [<ffffffff8020bc46>] ret_from_intr+0x0/0xf > <EOI> [<ffffffff80212f2c>] ? mwait_idle+0x4c/0x60 > [<ffffffff80212f23>] ? mwait_idle+0x43/0x60 > [<ffffffff8020a217>] ? cpu_idle+0x57/0xa0 > [<ffffffff8040f380>] ? rest_init+0x70/0x80 > Code: 10 5b 41 5c 41 5d 41 5e c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 > 48 83 ec 08 48 8b 9f 78 01 00 00 e8 2b c7 f1 ff 89 c0 <48> 8b 04 c3 48 83 c4 08 > 5b c9 c3 66 66 66 66 66 2e 0f 1f 84 00 > RIP [<ffffffff803fce17>] icmp_sk+0x17/0x30 > RSP <ffffffff8057fc30> > CR2: 0000000000000000 > ---[ end trace ea161157b76b33e8 ]--- > Kernel panic - not syncing: Aiee, killing interrupt handler! Receiving packets while we are cleaning up a network namespace is a racy proposition. It is possible when the packet arrives that we have removed some but not all of the state we need to fully process it. We have the choice of either playing wack-a-mole with the cleanup routines or simply dropping packets when we don't have a network namespace to handle them. Since the check looks inexpensive in netif_receive_skb let's just drop the incoming packets. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-20 22:16:51 -07:00
[NET]: Relax the reference counting of init_net_ns When the CONFIG_NET_NS is n there's no need in refcounting the initial net namespace. So relax this code by making a stupid stubs for the "n" case. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 00:43:49 -07:00
[NETNS]: Make netns refconting debug like a socket one. Make release_net/hold_net noop for performance-hungry people. This is a debug staff and should be used in the debug mode only. Add check for net != NULL in hold/release calls. This will be required later on. [ Added minor simplifications suggested by Brian Haley. -DaveM ] Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 01:58:04 -07:00
[NET]: Relax the reference counting of init_net_ns When the CONFIG_NET_NS is n there's no need in refcounting the initial net namespace. So relax this code by making a stupid stubs for the "n" case. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 00:43:49 -07:00
[NETNS]: Make netns refconting debug like a socket one. Make release_net/hold_net noop for performance-hungry people. This is a debug staff and should be used in the debug mode only. Add check for net != NULL in hold/release calls. This will be required later on. [ Added minor simplifications suggested by Brian Haley. -DaveM ] Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 01:58:04 -07:00
[NET]: Relax the reference counting of init_net_ns When the CONFIG_NET_NS is n there's no need in refcounting the initial net namespace. So relax this code by making a stupid stubs for the "n" case. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 00:43:49 -07:00
[NETNS]: Make netns refconting debug like a socket one. Make release_net/hold_net noop for performance-hungry people. This is a debug staff and should be used in the debug mode only. Add check for net != NULL in hold/release calls. This will be required later on. [ Added minor simplifications suggested by Brian Haley. -DaveM ] Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 01:58:04 -07:00
[NET]: Relax the reference counting of init_net_ns When the CONFIG_NET_NS is n there's no need in refcounting the initial net namespace. So relax this code by making a stupid stubs for the "n" case. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 00:43:49 -07:00
[NETNS]: Make netns refconting debug like a socket one. Make release_net/hold_net noop for performance-hungry people. This is a debug staff and should be used in the debug mode only. Add check for net != NULL in hold/release calls. This will be required later on. [ Added minor simplifications suggested by Brian Haley. -DaveM ] Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 01:58:04 -07:00
[NET]: Relax the reference counting of init_net_ns When the CONFIG_NET_NS is n there's no need in refcounting the initial net namespace. So relax this code by making a stupid stubs for the "n" case. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 00:43:49 -07:00
[NET] NETNS: Omit namespace comparision without CONFIG_NET_NS. Introduce an inline net_eq() to compare two namespaces. Without CONFIG_NET_NS, since no namespace other than &init_net exists, it is always 1. We do not need to convert 1) inline vs inline and 2) inline vs &init_net comparisons. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26 03:57:35 +09:00
[NETNS]: Make netns refconting debug like a socket one. Make release_net/hold_net noop for performance-hungry people. This is a debug staff and should be used in the debug mode only. Add check for net != NULL in hold/release calls. This will be required later on. [ Added minor simplifications suggested by Brian Haley. -DaveM ] Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 01:58:04 -07:00
[NET] NETNS: Omit namespace comparision without CONFIG_NET_NS. Introduce an inline net_eq() to compare two namespaces. Without CONFIG_NET_NS, since no namespace other than &init_net exists, it is always 1. We do not need to convert 1) inline vs inline and 2) inline vs &init_net comparisons. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26 03:57:35 +09:00
[NET]: Relax the reference counting of init_net_ns When the CONFIG_NET_NS is n there's no need in refcounting the initial net namespace. So relax this code by making a stupid stubs for the "n" case. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 00:43:49 -07:00
[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00
[NETNS]: Make netns refconting debug like a socket one. Make release_net/hold_net noop for performance-hungry people. This is a debug staff and should be used in the debug mode only. Add check for net != NULL in hold/release calls. This will be required later on. [ Added minor simplifications suggested by Brian Haley. -DaveM ] Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 01:58:04 -07:00
[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00
[NETNS]: Move some code into __init section when CONFIG_NET_NS=n With the net namespaces many code leaved the __init section, thus making the kernel occupy more memory than it did before. Since we have a config option that prohibits the namespace creation, the functions that initialize/finalize some netns stuff are simply not needed and can be freed after the boot. Currently, this is almost not noticeable, since few calls are no longer in __init, but when the namespaces will be merged it will be possible to free more code. I propose to use the __net_init, __net_exit and __net_initdata "attributes" for functions/variables that are not used if the CONFIG_NET_NS is not set to save more space in memory. The exiting functions cannot just reside in the __exit section, as noticed by David, since the init section will have references on it and the compilation will fail due to modpost checks. These references can exist, since the init namespace never dies and the exit callbacks are never called. So I introduce the __exit_refok attribute just like it is already done with the __init_refok. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-08 20:38:39 -07:00
[NET]: Move unneeded data to initdata section. This patch reverts Eric's commit 2b008b0a8e96b726c603c5e1a5a7a509b5f61e35 It diets .text & .data section of the kernel if CONFIG_NET_NS is not set. This is safe after list operations cleanup. Signed-of-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 03:23:50 -08:00
[NETNS]: Move some code into __init section when CONFIG_NET_NS=n With the net namespaces many code leaved the __init section, thus making the kernel occupy more memory than it did before. Since we have a config option that prohibits the namespace creation, the functions that initialize/finalize some netns stuff are simply not needed and can be freed after the boot. Currently, this is almost not noticeable, since few calls are no longer in __init, but when the namespaces will be merged it will be possible to free more code. I propose to use the __net_init, __net_exit and __net_initdata "attributes" for functions/variables that are not used if the CONFIG_NET_NS is not set to save more space in memory. The exiting functions cannot just reside in the __exit section, as noticed by David, since the init section will have references on it and the compilation will fail due to modpost checks. These references can exist, since the init namespace never dies and the exit callbacks are never called. So I introduce the __exit_refok attribute just like it is already done with the __init_refok. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-08 20:38:39 -07:00
[NET]: Move unneeded data to initdata section. This patch reverts Eric's commit 2b008b0a8e96b726c603c5e1a5a7a509b5f61e35 It diets .text & .data section of the kernel if CONFIG_NET_NS is not set. This is safe after list operations cleanup. Signed-of-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 03:23:50 -08:00
[NETNS]: Move some code into __init section when CONFIG_NET_NS=n With the net namespaces many code leaved the __init section, thus making the kernel occupy more memory than it did before. Since we have a config option that prohibits the namespace creation, the functions that initialize/finalize some netns stuff are simply not needed and can be freed after the boot. Currently, this is almost not noticeable, since few calls are no longer in __init, but when the namespaces will be merged it will be possible to free more code. I propose to use the __net_init, __net_exit and __net_initdata "attributes" for functions/variables that are not used if the CONFIG_NET_NS is not set to save more space in memory. The exiting functions cannot just reside in the __exit section, as noticed by David, since the init section will have references on it and the compilation will fail due to modpost checks. These references can exist, since the init namespace never dies and the exit callbacks are never called. So I introduce the __exit_refok attribute just like it is already done with the __init_refok. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-08 20:38:39 -07:00
[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00
[NETNS]: The net-subsys IDs generator. To make some per-net generic pointers, we need some way to address them, i.e. - IDs. This is simple IDA-based IDs generator for pernet subsystems. Addressing questions about potential checkpoint/restart problems: these IDs are "lite-offsets" within the net structure and are by no means supposed to be exported to the userspace. Since it will be used in the nearest future by devices only (tun, vlan, tunnels, bridge, etc), I make it resemble the functionality of register_pernet_device(). The new ids is stored in the *id pointer _before_ calling the init callback to make this id available in this callback. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-15 00:35:23 -07:00
[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00
[NET]: Implement the per network namespace sysctl infrastructure The user interface is: register_net_sysctl_table and unregister_net_sysctl_table. Very much like the current interface except there is a network namespace parameter. With this any sysctl registered with register_net_sysctl_table will only show up to tasks in the same network namespace. All other sysctls continue to be globally visible. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 23:55:42 +11:00
netns: Introduce sysctl root for read-only net sysctls. This one stores all ctl-heads in one list and restricts the permissions not give write access to non-init net namespaces. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 13:45:33 -07:00
[NET]: Implement the per network namespace sysctl infrastructure The user interface is: register_net_sysctl_table and unregister_net_sysctl_table. Very much like the current interface except there is a network namespace parameter. With this any sysctl registered with register_net_sysctl_table will only show up to tasks in the same network namespace. All other sysctls continue to be globally visible. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 23:55:42 +11:00
netns: Introduce sysctl root for read-only net sysctls. This one stores all ctl-heads in one list and restricts the permissions not give write access to non-init net namespaces. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 13:45:33 -07:00
[NET]: Implement the per network namespace sysctl infrastructure The user interface is: register_net_sysctl_table and unregister_net_sysctl_table. Very much like the current interface except there is a network namespace parameter. With this any sysctl registered with register_net_sysctl_table will only show up to tasks in the same network namespace. All other sysctls continue to be globally visible. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30 23:55:42 +11:00
[NET]: Basic network namespace infrastructure. This is the basic infrastructure needed to support network namespaces. This infrastructure is: - Registration functions to support initializing per network namespace data when a network namespaces is created or destroyed. - struct net. The network namespace data structure. This structure will grow as variables are made per network namespace but this is the minimal starting point. - Functions to grab a reference to the network namespace. I provide both get/put functions that keep a network namespace from being freed. And hold/release functions serve as weak references and will warn if their count is not zero when the data structure is freed. Useful for dealing with more complicated data structures like the ipv4 route cache. - A list of all of the network namespaces so we can iterate over them. - A slab for the network namespace data structure allowing leaks to be spotted. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 11:50:50 +02:00