linux/drivers/md/dm.h

164 lines
4.7 KiB

dm table: rework reference counting Rework table reference counting. The existing code uses a reference counter. When the last reference is dropped and the counter reaches zero, the table destructor is called. Table reference counters are acquired/released from upcalls from other kernel code (dm_any_congested, dm_merge_bvec, dm_unplug_all). If the reference counter reaches zero in one of the upcalls, the table destructor is called from almost random kernel code. This leads to various problems: * dm_any_congested being called under a spinlock, which calls the destructor, which calls some sleeping function. * the destructor attempting to take a lock that is already taken by the same process. * stale reference from some other kernel code keeps the table constructed, which keeps some devices open, even after successful return from "dmsetup remove". This can confuse lvm and prevent closing of underlying devices or reusing device minor numbers. The patch changes reference counting so that the table destructor can be called only at predetermined places. The table has always exactly one reference from either mapped_device->map or hash_cell->new_map. After this patch, this reference is not counted in table->holders. A pair of dm_create_table/dm_destroy_table functions is used for table creation/destruction. Temporary references from the other code increase table->holders. A pair of dm_table_get/dm_table_put functions is used to manipulate it. When the table is about to be destroyed, we wait for table->holders to reach 0. Then, we call the table destructor. We use active waiting with msleep(1), because the situation happens rarely (to one user in 5 years) and removing the device isn't performance-critical task: the user doesn't care if it takes one tick more or not. This way, the destructor is called only at specific points (dm_table_destroy function) and the above problems associated with lazy destruction can't happen. Finally remove the temporary protection added to dm_any_congested(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:10 +00:00
dm: prepare for request based option This patch adds core functions for request-based dm. When struct mapped device (md) is initialized, md->queue has an I/O scheduler and the following functions are used for request-based dm as the queue functions: make_request_fn: dm_make_request() pref_fn: dm_prep_fn() request_fn: dm_request_fn() softirq_done_fn: dm_softirq_done() lld_busy_fn: dm_lld_busy() Actual initializations are done in another patch (PATCH 2). Below is a brief summary of how request-based dm behaves, including: - making request from bio - cloning, mapping and dispatching request - completing request and bio - suspending md - resuming md bio to request ============== md->queue->make_request_fn() (dm_make_request()) calls __make_request() for a bio submitted to the md. Then, the bio is kept in the queue as a new request or merged into another request in the queue if possible. Cloning and Mapping =================== Cloning and mapping are done in md->queue->request_fn() (dm_request_fn()), when requests are dispatched after they are sorted by the I/O scheduler. dm_request_fn() checks busy state of underlying devices using target's busy() function and stops dispatching requests to keep them on the dm device's queue if busy. It helps better I/O merging, since no merge is done for a request once it is dispatched to underlying devices. Actual cloning and mapping are done in dm_prep_fn() and map_request() called from dm_request_fn(). dm_prep_fn() clones not only request but also bios of the request so that dm can hold bio completion in error cases and prevent the bio submitter from noticing the error. (See the "Completion" section below for details.) After the cloning, the clone is mapped by target's map_rq() function and inserted to underlying device's queue using blk_insert_cloned_request(). Completion ========== Request completion can be hooked by rq->end_io(), but then, all bios in the request will have been completed even error cases, and the bio submitter will have noticed the error. To prevent the bio completion in error cases, request-based dm clones both bio and request and hooks both bio->bi_end_io() and rq->end_io(): bio->bi_end_io(): end_clone_bio() rq->end_io(): end_clone_request() Summary of the request completion flow is below: blk_end_request() for a clone request => blk_update_request() => bio->bi_end_io() == end_clone_bio() for each clone bio => Free the clone bio => Success: Complete the original bio (blk_update_request()) Error: Don't complete the original bio => blk_finish_request() => rq->end_io() == end_clone_request() => blk_complete_request() => dm_softirq_done() => Free the clone request => Success: Complete the original request (blk_end_request()) Error: Requeue the original request end_clone_bio() completes the original request on the size of the original bio in successful cases. Even if all bios in the original request are completed by that completion, the original request must not be completed yet to keep the ordering of request completion for the stacking. So end_clone_bio() uses blk_update_request() instead of blk_end_request(). In error cases, end_clone_bio() doesn't complete the original bio. It just frees the cloned bio and gives over the error handling to end_clone_request(). end_clone_request(), which is called with queue lock held, completes the clone request and the original request in a softirq context (dm_softirq_done()), which has no queue lock, to avoid a deadlock issue on submission of another request during the completion: - The submitted request may be mapped to the same device - Request submission requires queue lock, but the queue lock has been held by itself and it doesn't know that The clone request has no clone bio when dm_softirq_done() is called. So target drivers can't resubmit it again even error cases. Instead, they can ask dm core for requeueing and remapping the original request in that cases. suspend ======= Request-based dm uses stopping md->queue as suspend of the md. For noflush suspend, just stops md->queue. For flush suspend, inserts a marker request to the tail of md->queue. And dispatches all requests in md->queue until the marker comes to the front of md->queue. Then, stops dispatching request and waits for the all dispatched requests to complete. After that, completes the marker request, stops md->queue and wake up the waiter on the suspend queue, md->wait. resume ====== Starts md->queue. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:35 +01:00
dm: do not initialise full request queue when bio based Change bio-based mapped devices no longer to have a fully initialized request_queue (request_fn, elevator, etc). This means bio-based DM devices no longer register elevator sysfs attributes ('iosched/' tree or 'scheduler' other than "none"). In contrast, a request-based DM device will continue to have a full request_queue and will register elevator sysfs attributes. Therefore a user can determine a DM device's type by checking if elevator sysfs attributes exist. First allocate a minimalist request_queue structure for a DM device (needed for both bio and request-based DM). Initialization of a full request_queue is deferred until it is known that the DM device is request-based, at the end of the table load sequence. Factor DM device's request_queue initialization: - common to both request-based and bio-based into dm_init_md_queue(). - specific to request-based into dm_init_request_based_queue(). The md->type_lock mutex is used to protect md->queue, in addition to md->type, during table_load(). A DM device's first table_load will establish the immutable md->type. But md->queue initialization, based on md->type, may fail at that time (because blk_init_allocated_queue cannot allocate memory). Therefore any subsequent table_load must (re)try dm_setup_md_queue independently of establishing md->type. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:02 +01:00
dm: separate device deletion from dm_put This patch separates the device deletion code from dm_put() to make sure the deletion happens in the process context. By this patch, device deletion always occurs in an ioctl (process) context and dm_put() can be called in interrupt context. As a result, the request-based dm's bad dm_put() usage pointed out by Mikulas below disappears. http://marc.info/?l=dm-devel&m=126699981019735&w=2 Without this patch, I confirmed there is a case to crash the system: dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt()) Some more backgrounds and details: In request-based dm, a device opener can remove a mapped_device while the last request is still completing, because bios in the last request complete first and then the device opener can close and remove the mapped_device before the last request completes: CPU0 CPU1 ================================================================= <<INTERRUPT>> blk_end_request_all(clone_rq) blk_update_request(clone_rq) bio_endio(clone_bio) == end_clone_bio blk_update_request(orig_rq) bio_endio(orig_bio) <<I/O completed>> dm_blk_close() dev_remove() dm_put(md) <<Free md>> blk_finish_request(clone_rq) .... dm_end_request(clone_rq) free_rq_clone(clone_rq) blk_end_request_all(orig_rq) rq_completed(md) So request-based dm used dm_get()/dm_put() to hold md for each I/O until its request completion handling is fully done. However, the final dm_put() can call the device deletion code which must not be run in interrupt context and may cause kernel panic. To solve the problem, this patch moves the device deletion code, dm_destroy(), to predetermined places that is actually deleting the mapped_device in ioctl (process) context, and changes dm_put() just to decrement the reference count of the mapped_device. By this change, dm_put() can be used in any context and the symmetric model below is introduced: dm_create(): create a mapped_device dm_destroy(): destroy a mapped_device dm_get(): increment the reference count of a mapped_device dm_put(): decrement the reference count of a mapped_device dm_destroy() waits for all references of the mapped_device to disappear, then deletes the mapped_device. dm_destroy() uses active waiting with msleep(1), since deleting the mapped_device isn't performance-critical task. And since at this point, nobody opens the mapped_device and no new reference will be taken, the pending counts are just for racing completing activity and will eventually decrease to zero. For the unlikely case of the forced module unload, dm_destroy_immediate(), which doesn't wait and forcibly deletes the mapped_device, is also introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f" may be stuck and never return. And now, because the mapped_device is deleted at this point, subsequent accesses to the mapped_device may cause NULL pointer references. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:13:56 +01:00