kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-16 22:39:48 +00:00
Code Issues Releases Packages Activity
linux/drivers/net/pppoe.c

1208 lines
28 KiB
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOE]: Key connections properly on local device. It is based on the assumption that an interface's ifindex is basically an alias for a local MAC address, so incoming packets now are matched to sockets based on remote MAC, session id, and ifindex of the interface the packet came in on/the socket was bound to by connect(). For relayed packets, the socket that's used for relaying is selected based on destination MAC, session ID and the interface index of the interface whose name currently matches the name requested by userspace as the relaying source interface. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02 13:16:56 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
[NET]: Make /proc/net per network namespace This patch makes /proc/net per network namespace. It modifies the global variables proc_net and proc_net_stat to be per network namespace. The proc_net file helpers are modified to take a network namespace argument, and all of their callers are fixed to pass &init_net for that argument. This ensures that all of the /proc/net files are only visible and usable in the initial network namespace until the code behind them has been updated to be handle multiple network namespaces. Making /proc/net per namespace is necessary as at least some files in /proc/net depend upon the set of network devices which is per network namespace, and even more files in /proc/net have contents that are relevant to a single network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 12:01:34 +02:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOX]: Fix assignment into const proto_ops. And actually, with this, the whole pppox layer can basically be removed and subsumed into pppoe.c, no other pppox sub-protocol implementation exists and we've had this thing for at least 4 years. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-27 20:57:40 -08:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
netns: net_identifiers should be read_mostly Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17 10:42:49 +00:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pppoe: endianness Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 02:55:33 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
[PPPOE]: Improve hashing function in hash_item(). The new code produces the same results as the old version and is ~ 3 to 6 times faster for 4-bit hashes on the CPUs I tested. Signed-off-by: Florian Zumbiehl <florz@florz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 13:47:57 -07:00
pppoe: endianness Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23 02:55:33 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOE]: Improve hashing function in hash_item(). The new code produces the same results as the old version and is ~ 3 to 6 times faster for 4-bit hashes on the CPUs I tested. Signed-off-by: Florian Zumbiehl <florz@florz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 13:47:57 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
[PPPOE]: Improve hashing function in hash_item(). The new code produces the same results as the old version and is ~ 3 to 6 times faster for 4-bit hashes on the CPUs I tested. Signed-off-by: Florian Zumbiehl <florz@florz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 13:47:57 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPoE]: miscellaneous smaller cleanups below is a patch that just removes dead code/initializers without any effect (first access is an assignment) that I stumbled accross while reading the source. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:56:31 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
pppoe: RCU locking in get_item_by_addr() Use dev_get_by_name_rcu() instead of dev_get_by_name(), to avoid touching device refcount in hotpath. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-01 19:51:22 +00:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
[PPPOE]: Key connections properly on local device. It is based on the assumption that an interface's ifindex is basically an alias for a local MAC address, so incoming packets now are matched to sockets based on remote MAC, session id, and ifindex of the interface the packet came in on/the socket was bound to by connect(). For relayed packets, the socket that's used for relaying is selected based on destination MAC, session ID and the interface index of the interface whose name currently matches the name requested by userspace as the relaying source interface. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02 13:16:56 -08:00
pppoe: RCU locking in get_item_by_addr() Use dev_get_by_name_rcu() instead of dev_get_by_name(), to avoid touching device refcount in hotpath. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-01 19:51:22 +00:00
pppoe: use pppoe_pernet instead of directly net_generic Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26 01:46:12 +00:00
pppoe: RCU locking in get_item_by_addr() Use dev_get_by_name_rcu() instead of dev_get_by_name(), to avoid touching device refcount in hotpath. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-01 19:51:22 +00:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
pppoe: RCU locking in get_item_by_addr() Use dev_get_by_name_rcu() instead of dev_get_by_name(), to avoid touching device refcount in hotpath. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-01 19:51:22 +00:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
pppoe: uninitialized variable in pppoe_flush_dev() This assignment got deleted along with the checks by mistake. This comes from: 8753d29fd "pppoe: remove unnecessary checks in pppoe_flush_dev" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-22 10:27:48 +00:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: Move && and || to end of previous line Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 07:58:21 +00:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
[NET]: Make device event notification network namespace safe Every user of the network device notifiers is either a protocol stack or a pseudo device. If a protocol stack that does not have support for multiple network namespaces receives an event for a device that is not in the initial network namespace it quite possibly can get confused and do the wrong thing. To avoid problems until all of the protocol stacks are converted this patch modifies all netdev event handlers to ignore events on devices that are not in the initial network namespace. As the rest of the code is made network namespace aware these checks can be removed. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 13:02:17 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: remove useless semicolons switch and while statements don't need semicolons at end of statement [ Fixup minor conflicts with recent wimax merge... -DaveM ] Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17 22:47:34 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPoE]: miscellaneous smaller cleanups below is a patch that just removes dead code/initializers without any effect (first access is an assignment) that I stumbled accross while reading the source. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:56:31 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
net pppoe: Check packet length on all receive paths The length field in the PPPOE header wasn't checked completely. This patch causes all packets shorter than the declared length to be dropped. It also changes the memcpy_toiovec call to skb_copy_datagram_iovec so that paged packets (rare for PPPOE) are handled properly. Thanks to Ilja of the Netric Security Team for discovering and reporting this bug, and Chris Wright for the total_len check. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-10 14:07:25 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPP] pppoe: Fix skb_unshare_check call position The skb_unshare_check call needs to be made before pskb_may_pull, not after. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 16:19:20 -07:00
[PPPOE]: Introduce pppoe_hdr() For consistency with all the other skb->nh.raw accessors. Also do some really obvious simplifications in pppoe_recvmsg, well the kfree_skb one is not so obvious, but free() and kfree() have the same behaviour (hint :-) ). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-10 15:56:08 -03:00
net pppoe: Check packet length on all receive paths The length field in the PPPOE header wasn't checked completely. This patch causes all packets shorter than the declared length to be dropped. It also changes the memcpy_toiovec call to skb_copy_datagram_iovec so that paged packets (rare for PPPOE) are handled properly. Thanks to Ilja of the Netric Security Team for discovering and reporting this bug, and Chris Wright for the total_len check. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-10 14:07:25 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pppoe: Fix socket leak. Move SKB trim before we lookup the socket so we don't have to put it on failure. Based upon an initial patch by Jarek Poplawski and suggestions from Herbert Xu. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-30 23:11:44 -07:00
net pppoe: Check packet length on all receive paths The length field in the PPPOE header wasn't checked completely. This patch causes all packets shorter than the declared length to be dropped. It also changes the memcpy_toiovec call to skb_copy_datagram_iovec so that paged packets (rare for PPPOE) are handled properly. Thanks to Ilja of the Netric Security Team for discovering and reporting this bug, and Chris Wright for the total_len check. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-10 14:07:25 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
pppoe: Fix socket leak. Move SKB trim before we lookup the socket so we don't have to put it on failure. Based upon an initial patch by Jarek Poplawski and suggestions from Herbert Xu. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-30 23:11:44 -07:00
net pppoe: Check packet length on all receive paths The length field in the PPPOE header wasn't checked completely. This patch causes all packets shorter than the declared length to be dropped. It also changes the memcpy_toiovec call to skb_copy_datagram_iovec so that paged packets (rare for PPPOE) are handled properly. Thanks to Ilja of the Netric Security Team for discovering and reporting this bug, and Chris Wright for the total_len check. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-10 14:07:25 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
[NET]: Make packet reception network namespace safe This patch modifies every packet receive function registered with dev_add_pack() to drop packets if they are not from the initial network namespace. This should ensure that the various network stacks do not receive packets in a anything but the initial network namespace until the code has been converted and is ready for them. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 11:53:39 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pppoe: Unshare skb before anything else We need to unshare the skb first as otherwise pskb_may_pull may write to a shared skb which could be bad. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-10 14:08:25 -07:00
[PPPOE]: Introduce pppoe_hdr() For consistency with all the other skb->nh.raw accessors. Also do some really obvious simplifications in pppoe_recvmsg, well the kfree_skb one is not so obvious, but free() and kfree() have the same behaviour (hint :-) ). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-10 15:56:08 -03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: convert usage of packet_type to read_mostly Protocols that use packet_type can be __read_mostly section for better locality. Elminate any unnecessary initializations of NULL. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-09 08:18:29 +00:00
net: replace uses of __constant_{endian} Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01 00:45:17 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: convert usage of packet_type to read_mostly Protocols that use packet_type can be __read_mostly section for better locality. Elminate any unnecessary initializations of NULL. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-09 08:18:29 +00:00
net: replace uses of __constant_{endian} Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01 00:45:17 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: convert usage of packet_type to read_mostly Protocols that use packet_type can be __read_mostly section for better locality. Elminate any unnecessary initializations of NULL. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-09 08:18:29 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[NET]: Make socket creation namespace safe. This patch passes in the namespace a new socket should be created in and has the socket code do the appropriate reference counting. By virtue of this all socket create methods are touched. In addition the socket create methods are modified so that they will fail if you attempt to create a socket in a non-default network namespace. Failing if we attempt to create a socket outside of the default network namespace ensures that as we incrementally make the network stack network namespace aware we will not export functionality that someone has not audited and made certain is network namespace safe. Allowing us to partially enable network namespaces before all of the exotic protocols are supported. Any protocol layers I have missed will fail to compile because I now pass an extra parameter into the socket creation code. [ Integrated AF_IUCV build fixes from Andrew Morton... -DaveM ] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-08 23:24:22 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[NET]: Forget the zero_it argument of sk_alloc() Finally, the zero_it argument can be completely removed from the callers and from the function prototype. Besides, fix the checkpatch.pl warnings about using the assignments inside if-s. This patch is rather big, and it is a part of the previous one. I splitted it wishing to make the patches more readable. Hope this particular split helped. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 00:39:31 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOE]: Fix device tear-down notification. pppoe_flush_dev() kicks all sockets bound to a device that is going down. In doing so, locks must be taken in the right order consistently (sock lock, followed by the pppoe_hash_lock). However, the scan process is based on us holding the sock lock. So, when something is found in the scan we must release the lock we're holding and grab the sock lock. This patch fixes race conditions between this code and pppoe_release(), both of which perform similar functions but would naturally prefer to grab locks in opposing orders. Both code paths are now going after these locks in a consistent manner. pppoe_hash_lock protects the contents of the "pppox_sock" objects that reside inside the hash. Thus, NULL'ing out the pppoe_dev field should be done under the protection of this lock. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:59:24 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPoE]: miscellaneous smaller cleanups below is a patch that just removes dead code/initializers without any effect (first access is an assignment) that I stumbled accross while reading the source. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:56:31 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOE]: Use ifindex instead of device pointer in key lookups. Otherwise we can potentially try to dereference a NULL device pointer in some cases. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-04 16:03:22 -08:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOE]: race between interface going down and connect() below you find a patch that (hopefully) fixes a race between an interface going down and a connect() to a peer on that interface. Before, connect() would determine that an interface is up, then the interface could go down and all entries referring to that interface in the item_hash_table would be marked as ZOMBIEs and their references to the device would be freed, and after that, connect() would put a new entry into the hash table referring to the device that meanwhile is down already - which also would cause unregister_netdevice() to wait until the socket has been release()d. This patch does not suffice if we are not allowed to accept connect()s referring to a device that we already acked a NETDEV_GOING_DOWN for (that is: all references are only guaranteed to be freed after NETDEV_DOWN has been acknowledged, not necessarily after the NETDEV_GOING_DOWN already). And if we are allowed to, we could avoid looking through the hash table upon NETDEV_GOING_DOWN completely and only do that once we get the NETDEV_DOWN ... mostrows: pppoe_flush_dev is called on NETDEV_GOING_DOWN and NETDEV_DOWN to deal with this "late connect" issue. Ideally one would hope to notify users at the "NETDEV_GOING_DOWN" phase (just to pretend to be nice). However, it is the NETDEV_DOWN scan that takes all the responsibility for ensuring nobody is hanging around at that time. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:57:27 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOE]: Advertise PPPoE MTU PPPoE must advertise the underlying device's MTU via the ppp channel descriptor structure, as multilink functionality depends on it. Signed-off-by: Michal Ostrowski <mostrows@earthlink.net> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-27 16:11:25 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe,pppol2tp - register channels with explicit net In PPPo[E|L2TP] we could explicitly point which net namespace we're going to use for channels - make it so. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:55:40 -08:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPoX/E]: return ENOTTY on unknown ioctl requests here another patch for the PPPoX/E code that makes sure that ENOTTY is returned for unknown ioctl requests rather than 0 (and removes another unneeded initializer which I didn't bother creating a separate patch for). Signed-off-by: Florian Zumbiehl <florz@florz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-30 17:48:23 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOE]: Key connections properly on local device. It is based on the assumption that an interface's ifindex is basically an alias for a local MAC address, so incoming packets now are matched to sockets based on remote MAC, session id, and ifindex of the interface the packet came in on/the socket was bound to by connect(). For relayed packets, the socket that's used for relaying is selected based on destination MAC, session ID and the interface index of the interface whose name currently matches the name requested by userspace as the relaying source interface. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02 13:16:56 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPoX/E]: return ENOTTY on unknown ioctl requests here another patch for the PPPoX/E code that makes sure that ENOTTY is returned for unknown ioctl requests rather than 0 (and removes another unneeded initializer which I didn't bother creating a separate patch for). Signed-off-by: Florian Zumbiehl <florz@florz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-30 17:48:23 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPoE]: miscellaneous smaller cleanups below is a patch that just removes dead code/initializers without any effect (first access is an assignment) that I stumbled accross while reading the source. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:56:31 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPoE]: miscellaneous smaller cleanups below is a patch that just removes dead code/initializers without any effect (first access is an assignment) that I stumbled accross while reading the source. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:56:31 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPoE]: move lock_sock() in pppoe_sendmsg() to the right location and the last one for now: Acquire the sock lock in pppoe_sendmsg() before accessing the sock - and in particular avoid releasing the lock even though it hasn't been acquired. Signed-off-by: Florian Zumbiehl <florz@florz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-30 17:49:13 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[SK_BUFF]: Introduce skb_reset_network_header(skb) For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-10 20:45:18 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: replace uses of __constant_{endian} Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01 00:45:17 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[NET]: Wrap netdevice hardware header creation. Add inline for common usage of hardware header creation, and fix bug in IPV6 mcast where the assumption about negative return is an errno. Negative return from hard_header means not enough space was available,(ie -N bytes). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-09 01:36:32 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-26 16:23:20 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPP] pppoe: Fix data clobbering in __pppoe_xmit and return value The function __pppoe_xmit modifies the skb data and therefore it needs to copy and skb data if it's cloned. In fact, it currently allocates a new skb so that it can return 0 in case of error without freeing the original skb. This is totally wrong because returning zero is meant to indicate congestion whereupon pppoe is supposed to wake up the upper layer once the congestion subsides. This makes sense for ppp_async and ppp_sync but is out-of-place for pppoe. This patch makes it always return 1 and free the skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 16:19:50 -07:00
[NET] skbuff: Add skb_cow_head This patch adds an optimised version of skb_cow that avoids the copy if the header can be modified even if the rest of the payload is cloned. This can be used in encapsulating paths where we only need to modify the header. As it is, this can be used in PPPOE and bridging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 16:21:16 -07:00
[PPP] pppoe: Fix data clobbering in __pppoe_xmit and return value The function __pppoe_xmit modifies the skb data and therefore it needs to copy and skb data if it's cloned. In fact, it currently allocates a new skb so that it can return 0 in case of error without freeing the original skb. This is totally wrong because returning zero is meant to indicate congestion whereupon pppoe is supposed to wake up the upper layer once the congestion subsides. This makes sense for ppp_async and ppp_sync but is out-of-place for pppoe. This patch makes it always return 1 and free the skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 16:19:50 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPP] pppoe: Fill in header directly in __pppoe_xmit This patch removes the hdr variable (which is copied into the skb) and instead sets the header directly in the skb. It also uses __skb_push instead of skb_push since we've just checked using skb_cow for enough head room. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 16:20:21 -07:00
[PPP] pppoe: Fix data clobbering in __pppoe_xmit and return value The function __pppoe_xmit modifies the skb data and therefore it needs to copy and skb data if it's cloned. In fact, it currently allocates a new skb so that it can return 0 in case of error without freeing the original skb. This is totally wrong because returning zero is meant to indicate congestion whereupon pppoe is supposed to wake up the upper layer once the congestion subsides. This makes sense for ppp_async and ppp_sync but is out-of-place for pppoe. This patch makes it always return 1 and free the skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 16:19:50 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPP] pppoe: Fill in header directly in __pppoe_xmit This patch removes the hdr variable (which is copied into the skb) and instead sets the header directly in the skb. It also uses __skb_push instead of skb_push since we've just checked using skb_cow for enough head room. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 16:20:21 -07:00
net: replace uses of __constant_{endian} Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01 00:45:17 -08:00
[PPP] pppoe: Fix data clobbering in __pppoe_xmit and return value The function __pppoe_xmit modifies the skb data and therefore it needs to copy and skb data if it's cloned. In fact, it currently allocates a new skb so that it can return 0 in case of error without freeing the original skb. This is totally wrong because returning zero is meant to indicate congestion whereupon pppoe is supposed to wake up the upper layer once the congestion subsides. This makes sense for ppp_async and ppp_sync but is out-of-place for pppoe. This patch makes it always return 1 and free the skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 16:19:50 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[NET]: Wrap netdevice hardware header creation. Add inline for common usage of hardware header creation, and fix bug in IPV6 mcast where the assumption about negative return is an errno. Negative return from hard_header means not enough space was available,(ie -N bytes). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-09 01:36:32 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPP] pppoe: Fix double-free on skb after transmit failure When I got rid of the second packet in __pppoe_xmit I created a double-free on the skb because of the goto abort on failure. This patch removes that. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-19 10:45:02 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPP] pppoe: Fix data clobbering in __pppoe_xmit and return value The function __pppoe_xmit modifies the skb data and therefore it needs to copy and skb data if it's cloned. In fact, it currently allocates a new skb so that it can return 0 in case of error without freeing the original skb. This is totally wrong because returning zero is meant to indicate congestion whereupon pppoe is supposed to wake up the upper layer once the congestion subsides. This makes sense for ppp_async and ppp_sync but is out-of-place for pppoe. This patch makes it always return 1 and free the skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 16:19:50 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPoE]: miscellaneous smaller cleanups below is a patch that just removes dead code/initializers without any effect (first access is an assignment) that I stumbled accross while reading the source. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:56:31 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPoE]: miscellaneous smaller cleanups below is a patch that just removes dead code/initializers without any effect (first access is an assignment) that I stumbled accross while reading the source. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:56:31 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pppoe: warning fix Fix warning: drivers/net/pppoe.c: In function 'pppoe_recvmsg': drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast because skb->len is unsigned int and total_len is size_t Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-20 21:58:02 -07:00
net pppoe: Check packet length on all receive paths The length field in the PPPOE header wasn't checked completely. This patch causes all packets shorter than the declared length to be dropped. It also changes the memcpy_toiovec call to skb_copy_datagram_iovec so that paged packets (rare for PPPOE) are handled properly. Thanks to Ilja of the Netric Security Team for discovering and reporting this bug, and Chris Wright for the total_len check. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-10 14:07:25 -07:00
[PPPOE]: Introduce pppoe_hdr() For consistency with all the other skb->nh.raw accessors. Also do some really obvious simplifications in pppoe_recvmsg, well the kfree_skb one is not so obvious, but free() and kfree() have the same behaviour (hint :-) ). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-10 15:56:08 -03:00
net pppoe: Check packet length on all receive paths The length field in the PPPOE header wasn't checked completely. This patch causes all packets shorter than the declared length to be dropped. It also changes the memcpy_toiovec call to skb_copy_datagram_iovec so that paged packets (rare for PPPOE) are handled properly. Thanks to Ilja of the Netric Security Team for discovering and reporting this bug, and Chris Wright for the total_len check. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-10 14:07:25 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOE]: Introduce pppoe_hdr() For consistency with all the other skb->nh.raw accessors. Also do some really obvious simplifications in pppoe_recvmsg, well the kfree_skb one is not so obvious, but free() and kfree() have the same behaviour (hint :-) ). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-10 15:56:08 -03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: convert print_mac to %pM This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27 15:59:26 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPoE]: miscellaneous smaller cleanups below is a patch that just removes dead code/initializers without any effect (first access is an assignment) that I stumbled accross while reading the source. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Michal Ostrowski <mostrows@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 16:56:31 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - stop using proc internals Alexey Dobriyan pointed that using PDE_NET outside the proc code is plain bogus (thanks Alexey!). Fix it. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26 21:11:02 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - stop using proc internals Alexey Dobriyan pointed that using PDE_NET outside the proc code is plain bogus (thanks Alexey!). Fix it. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26 21:11:02 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pppoe: fix /proc/net/pppoe If a socket is hashed in last slot of pppoe hash table (PPPOE_HASH_SIZE-1) we report it many times (up to filling seq buffer) (Only the last socket of last slot) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-28 23:43:08 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - stop using proc internals Alexey Dobriyan pointed that using PDE_NET outside the proc code is plain bogus (thanks Alexey!). Fix it. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26 21:11:02 -08:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: constify VFTs Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14 13:52:18 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - stop using proc internals Alexey Dobriyan pointed that using PDE_NET outside the proc code is plain bogus (thanks Alexey!). Fix it. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26 21:11:02 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PATCH] mark struct file_operations const 5 Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 00:55:34 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - stop using proc internals Alexey Dobriyan pointed that using PDE_NET outside the proc code is plain bogus (thanks Alexey!). Fix it. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26 21:11:02 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
[PPPOX]: Fix assignment into const proto_ops. And actually, with this, the whole pppox layer can basically be removed and subsumed into pppoe.c, no other pppox sub-protocol implementation exists and we've had this thing for at least 4 years. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-27 20:57:40 -08:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - code cleanup and helpers - Introduce PPPOE_HASH_MASK. - Remove redundant declaration of pppoe_chan_ops. - Introduce stage_session helper. - Tabs, space, long-line-split cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:15 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
net: Simplify pppoe pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 15:46:10 +00:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
net: Simplify pppoe pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 15:46:10 +00:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
ppp: section fixes re netns PPP is modular code so no initdata on netns hooks. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09 18:05:16 -08:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
net: Simplify pppoe pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 15:46:10 +00:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: Simplify pppoe pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 15:46:10 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net,pppoe: fixup module init/exit subsequent calls pernet data should allocated first and freed last on module init/exit routines otherwise it's possible to have unserialized calls to packet handling routines. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 16:39:16 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net,pppoe: fixup module init/exit subsequent calls pernet data should allocated first and freed last on module init/exit routines otherwise it's possible to have unserialized calls to packet handling routines. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 16:39:16 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net,pppoe: fixup module init/exit subsequent calls pernet data should allocated first and freed last on module init/exit routines otherwise it's possible to have unserialized calls to packet handling routines. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 16:39:16 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net,pppoe: fixup module init/exit subsequent calls pernet data should allocated first and freed last on module init/exit routines otherwise it's possible to have unserialized calls to packet handling routines. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 16:39:16 -07:00
drivers/net: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 13:24:59 -04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net,pppoe: fixup module init/exit subsequent calls pernet data should allocated first and freed last on module init/exit routines otherwise it's possible to have unserialized calls to packet handling routines. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 16:39:16 -07:00
net: Simplify pppoe pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 15:46:10 +00:00
net: pppoe - introduce net-namespace functionality - each net-namespace for pppoe module is having own hash table and appropriate locks wich are allocated at time of namespace intialization. It requires about 140 bytes of memory for every new namespace but such approach allow us to escape from hash chains growing and additional lock contends (especially in SMP environment). - pppox code allows to create per-namespace sockets for PX_PROTO_OE protocol only (since at this moment support for pppol2tp net-namespace is not implemented yet). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 15:54:54 -08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net,pppoe: fixup module init/exit subsequent calls pernet data should allocated first and freed last on module init/exit routines otherwise it's possible to have unserialized calls to packet handling routines. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 16:39:16 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
net: Simplify pppoe pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-29 15:46:10 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00