License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-07-10 13:07:58 +02:00
|
|
|
|
2019-07-21 13:24:30 +02:00
|
|
|
|
2019-08-30 14:45:20 -03:00
|
|
|
|
2019-10-07 14:53:17 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2017-04-19 18:38:33 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
2017-04-17 16:23:22 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2019-08-30 14:45:20 -03:00
|
|
|
|
2018-08-17 13:45:56 +02:00
|
|
|
|
2020-09-24 21:44:53 +09:00
|
|
|
|
|
|
|
|
|
2019-09-30 11:48:32 -03:00
|
|
|
|
2019-08-06 15:25:25 +02:00
|
|
|
|
2020-08-27 21:32:01 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-04-19 18:38:33 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-09-30 11:48:32 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-09-24 21:44:53 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf stat: Enable counting events for BPF programs
Introduce 'perf stat -b' option, which counts events for BPF programs, like:
[root@localhost ~]# ~/perf stat -e ref-cycles,cycles -b 254 -I 1000
1.487903822 115,200 ref-cycles
1.487903822 86,012 cycles
2.489147029 80,560 ref-cycles
2.489147029 73,784 cycles
3.490341825 60,720 ref-cycles
3.490341825 37,797 cycles
4.491540887 37,120 ref-cycles
4.491540887 31,963 cycles
The example above counts 'cycles' and 'ref-cycles' of BPF program of id
254. This is similar to bpftool-prog-profile command, but more
flexible.
'perf stat -b' creates per-cpu perf_event and loads fentry/fexit BPF
programs (monitor-progs) to the target BPF program (target-prog). The
monitor-progs read perf_event before and after the target-prog, and
aggregate the difference in a BPF map. Then the user space reads data
from these maps.
A new 'struct bpf_counter' is introduced to provide a common interface
that uses BPF programs/maps to count perf events.
Committer notes:
Removed all but bpf_counter.h includes from evsel.h, not needed at all.
Also BPF map lookups for PERCPU_ARRAYs need to have as its value receive
buffer passed to the kernel libbpf_num_possible_cpus() entries, not
evsel__nr_cpus(evsel), as the former uses
/sys/devices/system/cpu/possible while the later uses
/sys/devices/system/cpu/online, which may be less than the 'possible'
number making the bpf map lookup overwrite memory and cause hard to
debug memory corruption.
We need to continue using evsel__nr_cpus(evsel) when accessing the
perf_counts array tho, not to overwrite another are of memory :-)
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/lkml/20210120163031.GU12699@kernel.org/
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Link: http://lore.kernel.org/lkml/20201229214214.3413833-4-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-12-29 13:42:14 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-08-14 15:48:23 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-08 15:11:28 +05:30
|
|
|
|
2013-08-14 15:48:23 +03:00
|
|
|
|
2019-09-11 12:54:33 +01:00
|
|
|
|
|
|
|
|
|
2014-07-14 23:46:49 +02:00
|
|
|
|
2013-08-14 15:48:23 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-07-14 23:46:49 +02:00
|
|
|
|
2013-08-14 15:48:23 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-02-25 21:30:16 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
2011-01-31 20:56:27 -02:00
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-01-31 20:56:27 -02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-01-31 20:56:27 -02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
2011-01-31 20:56:27 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
2019-08-26 19:02:31 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-01-31 20:56:27 -02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-25 20:17:41 +02:00
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-26 19:02:31 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-01-31 20:56:27 -02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
2019-08-25 20:17:45 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-26 19:02:31 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-01-31 20:56:27 -02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-26 19:02:31 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-01-31 20:56:27 -02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-26 19:02:31 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2019-08-25 20:17:49 +02:00
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-26 19:02:31 -03:00
|
|
|
|
|
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-25 20:17:46 +02:00
|
|
|
|
|
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-26 19:02:31 -03:00
|
|
|
|
|
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:29 +02:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-09-19 14:56:45 -04:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
2019-04-01 12:43:18 -04:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-09-19 14:56:46 -04:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
|
|
|
|
|
2018-09-19 14:56:46 -04:00
|
|
|
|
2018-08-08 14:02:53 -04:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-09-19 14:56:46 -04:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
|
|
|
|
|
2018-09-19 14:56:46 -04:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
|
|
|
|
|
2018-08-08 14:02:53 -04:00
|
|
|
|
|
|
|
|
|
2018-09-19 14:56:46 -04:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
2018-09-19 14:56:46 -04:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2018-09-19 14:56:45 -04:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
|
|
|
|
|
2018-11-30 10:44:07 -05:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
2019-07-21 13:24:29 +02:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-08-08 14:02:50 -04:00
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-07-10 13:08:00 +02:00
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
|
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-28 15:57:16 +02:00
|
|
|
|
|
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-07-25 17:13:27 -03:00
|
|
|
|
|
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:49 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-03-31 18:27:43 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:30 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:17 +02:00
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:50 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-01-19 14:08:15 -02:00
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2012-01-19 14:08:15 -02:00
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
2012-01-19 14:08:15 -02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:20 +02:00
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-03-31 18:27:43 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-07-10 13:07:55 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2019-07-21 13:23:53 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-04-29 15:53:17 -03:00
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2019-07-21 13:23:49 +02:00
|
|
|
|
2019-07-21 13:23:50 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2011-04-14 11:20:14 -03:00
|
|
|
|
2011-03-31 18:27:43 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
2011-04-14 11:20:14 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:29 +02:00
|
|
|
|
2011-10-25 10:42:19 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:01 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-01-31 20:56:27 -02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 01:15:03 +03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2011-01-30 11:59:43 -02:00
|
|
|
|
2019-07-21 13:23:49 +02:00
|
|
|
|
2019-07-21 13:23:50 +02:00
|
|
|
|
2011-01-30 11:59:43 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:54 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-09-02 14:34:52 +02:00
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2011-03-31 18:27:43 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
2011-01-30 11:59:43 -02:00
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
2019-07-28 12:45:35 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2011-03-31 18:27:43 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-31 22:48:33 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 01:15:03 +03:00
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-06 11:28:02 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
2019-08-06 11:28:02 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
2019-08-06 11:28:02 +02:00
|
|
|
|
2018-12-26 12:21:21 +01:00
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-12-17 17:24:45 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 01:15:03 +03:00
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:28 +02:00
|
|
|
|
2019-07-21 13:23:59 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2019-07-21 13:24:28 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
2019-07-27 20:30:53 +02:00
|
|
|
|
2018-08-17 13:45:56 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-30 13:04:59 +02:00
|
|
|
|
2019-07-27 20:30:53 +02:00
|
|
|
|
2018-08-17 13:45:56 +02:00
|
|
|
|
2019-07-27 22:33:20 +02:00
|
|
|
|
2018-08-17 13:45:56 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
2011-03-31 18:27:43 +02:00
|
|
|
|
2019-07-27 20:30:53 +02:00
|
|
|
|
2011-05-22 02:17:22 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-08-17 13:45:56 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-10-07 14:53:18 +02:00
|
|
|
|
perf python: Switch to new perf_mmap__read_event() interface
The perf python binding still use the legacy interface.
No functional change.
Committer notes:
Tested before and after with:
[root@jouet perf]# export PYTHONPATH=/tmp/build/perf/python
[root@jouet perf]# tools/perf/python/twatch.py
cpu: 0, pid: 1183, tid: 6293 { type: exit, pid: 1183, ppid: 1183, tid: 6293, ptid: 6293, time: 17886646588257}
cpu: 2, pid: 13820, tid: 13820 { type: fork, pid: 13820, ppid: 13820, tid: 6306, ptid: 13820, time: 17886869099529}
cpu: 1, pid: 13820, tid: 6306 { type: comm, pid: 13820, tid: 6306, comm: TaskSchedulerFo }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@jouet perf]#
No problems found.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-3-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-01 18:09:00 -05:00
|
|
|
|
|
|
|
|
|
2019-10-07 14:53:20 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-11-30 14:17:57 -03:00
|
|
|
|
2018-03-22 00:57:32 +01:00
|
|
|
|
|
|
|
|
|
2016-07-10 13:07:59 +02:00
|
|
|
|
2018-03-22 00:57:32 +01:00
|
|
|
|
2016-07-10 13:07:59 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-04-30 11:03:49 -03:00
|
|
|
|
2016-07-10 13:07:56 +02:00
|
|
|
|
|
|
|
|
|
2019-10-07 14:53:17 +02:00
|
|
|
|
2016-07-10 13:07:56 +02:00
|
|
|
|
2011-06-02 10:55:10 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
perf python: Switch to new perf_mmap__read_event() interface
The perf python binding still use the legacy interface.
No functional change.
Committer notes:
Tested before and after with:
[root@jouet perf]# export PYTHONPATH=/tmp/build/perf/python
[root@jouet perf]# tools/perf/python/twatch.py
cpu: 0, pid: 1183, tid: 6293 { type: exit, pid: 1183, ppid: 1183, tid: 6293, ptid: 6293, time: 17886646588257}
cpu: 2, pid: 13820, tid: 13820 { type: fork, pid: 13820, ppid: 13820, tid: 6306, ptid: 13820, time: 17886869099529}
cpu: 1, pid: 13820, tid: 6306 { type: comm, pid: 13820, tid: 6306, comm: TaskSchedulerFo }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@jouet perf]#
No problems found.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-3-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-01 18:09:00 -05:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-10-25 10:42:19 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2011-10-25 10:42:19 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Enable grouping logic for parsed events
This patch adds a functionality that allows to create event groups
based on the way they are specified on the command line. Adding
functionality to the '{}' group syntax introduced in earlier patch.
The current '--group/-g' option behaviour remains intact. If you
specify it for record/stat/top command, all the specified events
become members of a single group with the first event as a group
leader.
With the new '{}' group syntax you can create group like:
# perf record -e '{cycles,faults}' ls
resulting in single event group containing 'cycles' and 'faults'
events, with cycles event as group leader.
All groups are created with regards to threads and cpus. Thus
recording an event group within a 2 threads on server with
4 CPUs will create 8 separate groups.
Examples (first event in brackets is group leader):
# 1 group (cpu-clock,task-clock)
perf record --group -e cpu-clock,task-clock ls
perf record -e '{cpu-clock,task-clock}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls
# 1 group (cpu-clock,task-clock,minor-faults,major-faults)
perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls
perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \
-e instructions ls
# 1 group
# (cpu-clock,task-clock,minor-faults,major-faults,instructions)
perf record --group -e cpu-clock,task-clock \
-e minor-faults,major-faults -e instructions ls perf record -e
'{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls
It's possible to use standard event modifier for a group, which spans
over all events in the group and updates each event modifier settings,
for example:
# perf record -r '{faults:k,cache-references}:p'
resulting in ':kp' modifier being used for 'faults' and ':p' modifier
being used for 'cache-references' event.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-08 12:22:36 +02:00
|
|
|
|
2020-11-30 09:22:07 -03:00
|
|
|
|
perf tools: Enable grouping logic for parsed events
This patch adds a functionality that allows to create event groups
based on the way they are specified on the command line. Adding
functionality to the '{}' group syntax introduced in earlier patch.
The current '--group/-g' option behaviour remains intact. If you
specify it for record/stat/top command, all the specified events
become members of a single group with the first event as a group
leader.
With the new '{}' group syntax you can create group like:
# perf record -e '{cycles,faults}' ls
resulting in single event group containing 'cycles' and 'faults'
events, with cycles event as group leader.
All groups are created with regards to threads and cpus. Thus
recording an event group within a 2 threads on server with
4 CPUs will create 8 separate groups.
Examples (first event in brackets is group leader):
# 1 group (cpu-clock,task-clock)
perf record --group -e cpu-clock,task-clock ls
perf record -e '{cpu-clock,task-clock}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls
# 1 group (cpu-clock,task-clock,minor-faults,major-faults)
perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls
perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \
-e instructions ls
# 1 group
# (cpu-clock,task-clock,minor-faults,major-faults,instructions)
perf record --group -e cpu-clock,task-clock \
-e minor-faults,major-faults -e instructions ls perf record -e
'{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls
It's possible to use standard event modifier for a group, which spans
over all events in the group and updates each event modifier settings,
for example:
# perf record -r '{faults:k,cache-references}:p'
resulting in ':kp' modifier being used for 'faults' and ':p' modifier
being used for 'cache-references' event.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-08 12:22:36 +02:00
|
|
|
|
2019-07-21 13:24:06 +02:00
|
|
|
|
2011-10-25 10:42:19 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-10-25 10:42:19 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-01-31 20:56:27 -02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:28 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2019-07-21 13:24:28 +02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
2016-06-23 11:26:15 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
2014-01-10 10:37:27 -03:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-07-24 13:00:03 -03:00
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-07-24 13:00:03 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-07-24 13:04:09 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf python: Support the PERF_RECORD_SWITCH event
To test it check tools/perf/python/twatch.py, after following the
instructions there to enable context_switch, output looks like:
[root@zoo linux]# tools/perf/python/twatch.py
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 }
cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 }
cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 }
cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 }
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 67, in <module>
main(context_switch = 1, thread = 31463)
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Guy Streeter <streeter@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
|
|
|
|
|
|
|
|
|
2011-01-31 20:56:27 -02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
2016-07-10 13:07:58 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-30 10:44:07 -05:00
|
|
|
|
2016-07-10 13:07:58 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
2016-07-10 13:07:58 +02:00
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
2016-07-10 13:07:58 +02:00
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2016-07-10 13:07:58 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-01-31 20:56:27 -02:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2013-09-12 18:39:35 +02:00
|
|
|
|
2012-10-16 14:51:04 -03:00
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-07-10 13:07:57 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Add Python 3 support
Added Python 3 support while keeping Python 2.7 compatibility.
Committer notes:
This doesn't make it to auto detect python 3, one has to explicitely ask
it to build with python 3 devel files, here are the instructions
provided by Jaroslav:
---
$ cp -a tools/perf tools/python3-perf
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all
$ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext
$ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext
---
We need to make this automatic, just like the existing tests for checking if
the python2 devel files are in place, allowing the build with python3 if
available, fallbacking to python2 and then just disabling it if none are
available.
So, using the PYTHON variable to build it using O= we get:
Before this patch:
$ rpm -q python3 python3-devel
python3-3.6.4-7.fc27.x86_64
python3-devel-3.6.4-7.fc27.x86_64
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
<SNIP>
Makefile.config:670: Python 3 is not yet supported; please set
Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately.
Makefile.config:672: If you also have Python 2 installed, then
Makefile.config:673: try something like:
Makefile.config:674:
Makefile.config:675: make PYTHON=python2
Makefile.config:676:
Makefile.config:677: Otherwise, disable Python support entirely:
Makefile.config:678:
Makefile.config:679: make NO_LIBPYTHON=1
Makefile.config:680:
Makefile.config:681: *** . Stop.
make[1]: *** [Makefile.perf:212: sub-make] Error 2
make: *** [Makefile:110: install-bin] Error 2
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
After:
$ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000)
$ rpm -qf /lib64/libpython3.6m.so.1.0
python3-libs-3.6.4-7.fc27.x86_64
$
Now verify that when using the binding the right ELF file is loaded,
using perf trace:
$ perf trace -e open* perf test python
0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
18: 'import perf' in python :
8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3
<SNIP>
25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3
<SNIP>
Ok
<SNIP>
$
And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents:
$ python3 tools/perf/python/twatch.py
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459}
cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503}
cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep }
cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps }
cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484}
cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153}
cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324}
^CTraceback (most recent call last):
File "tools/perf/python/twatch.py", line 68, in <module>
main()
File "tools/perf/python/twatch.py", line 40, in main
evlist.poll(timeout = -1)
KeyboardInterrupt
$
# ps ax|grep twatch
5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py
# ls -la /proc/5197/smaps
-r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps
# grep python /proc/5197/smaps
558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6
558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6
558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6
7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0
#
And with this patch, but building normally, without specifying the
PYTHON=python3 part, which will make it use python2 if its devel files are
available, like in this test:
$ make O=/tmp/build/perf -C tools/perf install-bin
$ ldd ~/bin/perf | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000)
$ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python
libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000)
$
[acme@jouet perf]$ tools/perf/python/twatch.py
cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306}
cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker }
$ ps ax | grep twatch.py
8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py
$ grep python /proc/8909/smaps
5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7
5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7
5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7
7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so
7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so
7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0
$
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com
Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org
[ Removed explicit check for python version, allowing it to really build with python3 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Initial python binding
First clarifying that this kind of binding is not a replacement or an
equivalent to the 'perf script' way of using python with perf.
The 'perf script' way is to process events and look at a given script
for some python function that matches the events to pass each event for
processing.
This is a python module, i.e. everything is driven from the python
script, that merely uses "import perf" or "from perf import".
perf script is focused on tracepoints, this binding is focused on profiling as
an initial target. More work is needed to make available tracepoint specific
variables as event variables accessible via this binding.
There is one example of such usage model, in
tools/perf/python/twatch.py, a tool to watch "cycles" events together
with task (fork, exit) and comm perf events.
For now, due to me not being able to grok how python distutils cope with
building C extensions outside the sources dir the install target just
builds it, I'm using it as:
[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/
[root@emilia linux]# tools/perf/python/twatch.py
cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: }
cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: }
cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: }
cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: }
cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: }
cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: }
cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: }
cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534}
cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls }
cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024}
The first 8 mmap events in this 8 way machine are a mistery that is still being
investigated.
More of the tools/perf/util/ APIs will be exposed via this python binding as
the need arises. For now the focus is on creating events and processing them,
symbol resolution is an obvious next step, with tracepoint variables as a close
second step.
Cc: Clark Williams <williams@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
|
|
|
|
2012-12-13 16:43:04 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
