kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/drivers/net/amt.c

3452 lines
89 KiB
Raw Normal View History

amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
ipv4: Convert ->flowi4_tos to dscp_t. Convert the ->flowic_tos field of struct flowi_common from __u8 to dscp_t, rename it ->flowic_dscp and propagate these changes to struct flowi and struct flowi4. We've had several bugs in the past where ECN bits could interfere with IPv4 routing, because these bits were not properly cleared when setting ->flowi4_tos. These bugs should be fixed now and the dscp_t type has been introduced to ensure that variables carrying DSCP values don't accidentally have any ECN bits set. Several variables and structure fields have been converted to dscp_t already, but the main IPv4 routing structure, struct flowi4, is still using a __u8. To avoid any future regression, this patch converts it to dscp_t. There are many users to convert at once. Fortunately, around half of ->flowi4_tos users already have a dscp_t value at hand, which they currently convert to __u8 using inet_dscp_to_dsfield(). For all of these users, we just need to drop that conversion. But, although we try to do the __u8 <-> dscp_t conversions at the boundaries of the network or of user space, some places still store TOS/DSCP variables as __u8 in core networking code. Those can hardly be converted either because the data structure is part of UAPI or because the same variable or field is also used for handling ECN in other parts of the code. In all of these cases where we don't have a dscp_t variable at hand, we need to use inet_dsfield_to_dscp() when interacting with ->flowi4_dscp. Changes since v1: * Fix space alignment in __bpf_redirect_neigh_v4() (Ido). Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/29acecb45e911d17446b9a3dbdb1ab7b821ea371.1756128932.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-25 15:37:43 +02:00
amt: do not use overwrapped cb area amt driver uses skb->cb for storing tunnel information. This job is worked before TC layer and then amt driver load tunnel info from skb->cb after TC layer. So, its cb area should not be overwrapped with CB area used by TC. In order to not use cb area used by TC, it skips the biggest cb structure used by TC, which was qdisc_skb_cb. But it's not anymore. Currently, biggest structure of TC's CB is tc_skb_cb. So, it should skip size of tc_skb_cb instead of qdisc_skb_cb. Fixes: ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240107144241.4169520-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-07 14:42:41 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
ipv4: Convert ->flowi4_tos to dscp_t. Convert the ->flowic_tos field of struct flowi_common from __u8 to dscp_t, rename it ->flowic_dscp and propagate these changes to struct flowi and struct flowi4. We've had several bugs in the past where ECN bits could interfere with IPv4 routing, because these bits were not properly cleared when setting ->flowi4_tos. These bugs should be fixed now and the dscp_t type has been introduced to ensure that variables carrying DSCP values don't accidentally have any ECN bits set. Several variables and structure fields have been converted to dscp_t already, but the main IPv4 routing structure, struct flowi4, is still using a __u8. To avoid any future regression, this patch converts it to dscp_t. There are many users to convert at once. Fortunately, around half of ->flowi4_tos users already have a dscp_t value at hand, which they currently convert to __u8 using inet_dscp_to_dsfield(). For all of these users, we just need to drop that conversion. But, although we try to do the __u8 <-> dscp_t conversions at the boundaries of the network or of user space, some places still store TOS/DSCP variables as __u8 in core networking code. Those can hardly be converted either because the data structure is part of UAPI or because the same variable or field is also used for handling ECN in other parts of the code. In all of these cases where we don't have a dscp_t variable at hand, we need to use inet_dsfield_to_dscp() when interacting with ->flowi4_dscp. Changes since v1: * Fix space alignment in __bpf_redirect_neigh_v4() (Ido). Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/29acecb45e911d17446b9a3dbdb1ab7b821ea371.1756128932.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-25 15:37:43 +02:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong type string definition amt message type definition starts from 1, not 0. But type_str[] starts from 0. So, it prints wrong type information. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:08 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix typo in amt AMT_MSG_TEARDOWM is defined, But it should be AMT_MSG_TEARDOWN. Fixes: b9022b53adad ("amt: add control plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-23 16:17:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: do not use overwrapped cb area amt driver uses skb->cb for storing tunnel information. This job is worked before TC layer and then amt driver load tunnel info from skb->cb after TC layer. So, its cb area should not be overwrapped with CB area used by TC. In order to not use cb area used by TC, it skips the biggest cb structure used by TC, which was qdisc_skb_cb. But it's not anymore. Currently, biggest structure of TC's CB is tc_skb_cb. So, it should skip size of tc_skb_cb instead of qdisc_skb_cb. Fixes: ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240107144241.4169520-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-07 14:42:41 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: do not use overwrapped cb area amt driver uses skb->cb for storing tunnel information. This job is worked before TC layer and then amt driver load tunnel info from skb->cb after TC layer. So, its cb area should not be overwrapped with CB area used by TC. In order to not use cb area used by TC, it skips the biggest cb structure used by TC, which was qdisc_skb_cb. But it's not anymore. Currently, biggest structure of TC's CB is tc_skb_cb. So, it should skip size of tc_skb_cb instead of qdisc_skb_cb. Fixes: ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240107144241.4169520-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-07 14:42:41 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
treewide: Replace kmalloc with kmalloc_obj for non-scalar types This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-20 23:49:23 -08:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: fix typo in comment Correct spelling on 'non-existent' in comment Signed-off-by: Ruffalo Lavoisier <RuffaloLavoisier@gmail.com> Link: https://lore.kernel.org/r/20220728032854.151180-1-RuffaloLavoisier@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28 12:28:54 +09:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
igmp: Fix data-races around sysctl_igmp_qrv. While reading sysctl_igmp_qrv, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. This test can be packed into a helper, so such changes will be in the follow-up series after net is merged into net-next. qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv); Fixes: a9fe8e29945d ("ipv4: implement igmp_qrv sysctl to tune igmp robustness variable") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-15 10:17:44 -07:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: remove unnecessary locks By the previous patch, amt gateway handlers are changed to worked by a single thread. So, most locks for gateway are not needed. So, it removes. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:04 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use READ_ONCE() in amt module There are some data races in the amt module. amt->ready4, amt->ready6, and amt->status can be accessed concurrently without locks. So, it uses READ_ONCE() and WRITE_ONCE(). Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: remove unnecessary locks By the previous patch, amt gateway handlers are changed to worked by a single thread. So, most locks for gateway are not needed. So, it removes. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:04 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix gateway mode stuck If a gateway can not receive any response to requests from a relay, gateway resets status from SENT_REQUEST to INIT and variable about a relay as well. And then it should start the full establish step from sending a discovery message and receiving advertisement message. But, after failure in amt_req_work() it continues sending a request message step with flushed(invalid) relay information and sets SENT_REQUEST. So, a gateway can't be established with a relay. In order to avoid this situation, it stops sending the request message step if it fails. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19 03:15:54 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use READ_ONCE() in amt module There are some data races in the amt module. amt->ready4, amt->ready6, and amt->status can be accessed concurrently without locks. So, it uses READ_ONCE() and WRITE_ONCE(). Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: remove unnecessary locks By the previous patch, amt gateway handlers are changed to worked by a single thread. So, most locks for gateway are not needed. So, it removes. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:04 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add missing regeneration nonce logic in request logic When AMT gateway starts sending a new request message, it should regenerate the nonce variable. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:06 +00:00
amt: fix gateway mode stuck If a gateway can not receive any response to requests from a relay, gateway resets status from SENT_REQUEST to INIT and variable about a relay as well. And then it should start the full establish step from sending a discovery message and receiving advertisement message. But, after failure in amt_req_work() it continues sending a request message step with flushed(invalid) relay information and sets SENT_REQUEST. So, a gateway can't be established with a relay. In order to avoid this situation, it stops sending the request message step if it fails. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19 03:15:54 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: drop unexpected query message AMT gateway interface should not receive unexpected query messages. In order to drop unexpected query messages, it checks nonce. And it also checks ready4 and ready6 variables to drop duplicated messages. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:08 +00:00
amt: add missing regeneration nonce logic in request logic When AMT gateway starts sending a new request message, it should regenerate the nonce variable. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:06 +00:00
amt: drop unexpected query message AMT gateway interface should not receive unexpected query messages. In order to drop unexpected query messages, it checks nonce. And it also checks ready4 and ready6 variables to drop duplicated messages. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:08 +00:00
amt: add missing regeneration nonce logic in request logic When AMT gateway starts sending a new request message, it should regenerate the nonce variable. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: remove unnecessary locks By the previous patch, amt gateway handlers are changed to worked by a single thread. So, most locks for gateway are not needed. So, it removes. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:04 +00:00
amt: fix gateway mode stuck If a gateway can not receive any response to requests from a relay, gateway resets status from SENT_REQUEST to INIT and variable about a relay as well. And then it should start the full establish step from sending a discovery message and receiving advertisement message. But, after failure in amt_req_work() it continues sending a request message step with flushed(invalid) relay information and sets SENT_REQUEST. So, a gateway can't be established with a relay. In order to avoid this situation, it stops sending the request message step if it fails. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-19 03:15:54 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
net: amt: convert to use secs_to_jiffies Since secs_to_jiffies()(commit:b35108a51cf7) has been introduced, we can use it to avoid scaling the time to msec. Signed-off-by: Yuesong Li <liyuesong@vivo.com> Reviewed-by: Joe Damato <joe@dama.to> Reviewed-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250613102014.3070898-1-liyuesong@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-13 18:20:12 +08:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
ipv4: Convert ->flowi4_tos to dscp_t. Convert the ->flowic_tos field of struct flowi_common from __u8 to dscp_t, rename it ->flowic_dscp and propagate these changes to struct flowi and struct flowi4. We've had several bugs in the past where ECN bits could interfere with IPv4 routing, because these bits were not properly cleared when setting ->flowi4_tos. These bugs should be fixed now and the dscp_t type has been introduced to ensure that variables carrying DSCP values don't accidentally have any ECN bits set. Several variables and structure fields have been converted to dscp_t already, but the main IPv4 routing structure, struct flowi4, is still using a __u8. To avoid any future regression, this patch converts it to dscp_t. There are many users to convert at once. Fortunately, around half of ->flowi4_tos users already have a dscp_t value at hand, which they currently convert to __u8 using inet_dscp_to_dsfield(). For all of these users, we just need to drop that conversion. But, although we try to do the __u8 <-> dscp_t conversions at the boundaries of the network or of user space, some places still store TOS/DSCP variables as __u8 in core networking code. Those can hardly be converted either because the data structure is part of UAPI or because the same variable or field is also used for handling ECN in other parts of the code. In all of these cases where we don't have a dscp_t variable at hand, we need to use inet_dsfield_to_dscp() when interacting with ->flowi4_dscp. Changes since v1: * Fix space alignment in __bpf_redirect_neigh_v4() (Ido). Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/29acecb45e911d17446b9a3dbdb1ab7b821ea371.1756128932.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-25 15:37:43 +02:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
net: ipv4: Add a flags argument to iptunnel_xmit(), udp_tunnel_xmit_skb() iptunnel_xmit() erases the contents of the SKB control block. In order to be able to set particular IPCB flags on the SKB, add a corresponding parameter, and propagate it to udp_tunnel_xmit_skb() as well. In one of the following patches, VXLAN driver will use this facility to mark packets as subject to IP multicast routing. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Antonio Quartulli <antonio@openvpn.net> Link: https://patch.msgid.link/89c9daf9f2dc088b6b92ccebcc929f51742de91f.1750113335.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17 00:44:09 +02:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
net: ipv4: Add a flags argument to iptunnel_xmit(), udp_tunnel_xmit_skb() iptunnel_xmit() erases the contents of the SKB control block. In order to be able to set particular IPCB flags on the SKB, add a corresponding parameter, and propagate it to udp_tunnel_xmit_skb() as well. In one of the following patches, VXLAN driver will use this facility to mark packets as subject to IP multicast routing. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Antonio Quartulli <antonio@openvpn.net> Link: https://patch.msgid.link/89c9daf9f2dc088b6b92ccebcc929f51742de91f.1750113335.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17 00:44:09 +02:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
ipv4: Convert ->flowi4_tos to dscp_t. Convert the ->flowic_tos field of struct flowi_common from __u8 to dscp_t, rename it ->flowic_dscp and propagate these changes to struct flowi and struct flowi4. We've had several bugs in the past where ECN bits could interfere with IPv4 routing, because these bits were not properly cleared when setting ->flowi4_tos. These bugs should be fixed now and the dscp_t type has been introduced to ensure that variables carrying DSCP values don't accidentally have any ECN bits set. Several variables and structure fields have been converted to dscp_t already, but the main IPv4 routing structure, struct flowi4, is still using a __u8. To avoid any future regression, this patch converts it to dscp_t. There are many users to convert at once. Fortunately, around half of ->flowi4_tos users already have a dscp_t value at hand, which they currently convert to __u8 using inet_dscp_to_dsfield(). For all of these users, we just need to drop that conversion. But, although we try to do the __u8 <-> dscp_t conversions at the boundaries of the network or of user space, some places still store TOS/DSCP variables as __u8 in core networking code. Those can hardly be converted either because the data structure is part of UAPI or because the same variable or field is also used for handling ECN in other parts of the code. In all of these cases where we don't have a dscp_t variable at hand, we need to use inet_dsfield_to_dscp() when interacting with ->flowi4_dscp. Changes since v1: * Fix space alignment in __bpf_redirect_neigh_v4() (Ido). Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/29acecb45e911d17446b9a3dbdb1ab7b821ea371.1756128932.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-25 15:37:43 +02:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong return type of amt_send_membership_update() amt_send_membership_update() would return -1 but it's return type is bool. So, it should be used TRUE instead of -1. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220109163702.6331-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09 16:37:02 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
net: ipv4: Add a flags argument to iptunnel_xmit(), udp_tunnel_xmit_skb() iptunnel_xmit() erases the contents of the SKB control block. In order to be able to set particular IPCB flags on the SKB, add a corresponding parameter, and propagate it to udp_tunnel_xmit_skb() as well. In one of the following patches, VXLAN driver will use this facility to mark packets as subject to IP multicast routing. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Antonio Quartulli <antonio@openvpn.net> Link: https://patch.msgid.link/89c9daf9f2dc088b6b92ccebcc929f51742de91f.1750113335.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17 00:44:09 +02:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use READ_ONCE() in amt module There are some data races in the amt module. amt->ready4, amt->ready6, and amt->status can be accessed concurrently without locks. So, it uses READ_ONCE() and WRITE_ONCE(). Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: remove unnecessary (void*) conversions Remove unnecessary void* type castings. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220621021648.2544-1-yuzhe@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-21 10:16:48 +08:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: remove unnecessary (void*) conversions Remove unnecessary void* type castings. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220621021648.2544-1-yuzhe@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-21 10:16:48 +08:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: remove unnecessary (void*) conversions Remove unnecessary void* type castings. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220621021648.2544-1-yuzhe@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-21 10:16:48 +08:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: remove unnecessary (void*) conversions Remove unnecessary void* type castings. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220621021648.2544-1-yuzhe@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-21 10:16:48 +08:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: drop unexpected advertisement message AMT gateway interface should not receive unexpected advertisement messages. In order to drop these packets, it should check nonce and amt->status. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:07 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: drop unexpected multicast data AMT gateway interface should not receive unexpected multicast data. Multicast data message type should be received after sending an update message, which means all establishment between gateway and relay is finished. So, amt_multicast_data_handler() checks amt->status. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:09 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: drop unexpected query message AMT gateway interface should not receive unexpected query messages. In order to drop unexpected query messages, it checks nonce. And it also checks ready4 and ready6 variables to drop duplicated messages. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:08 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: drop unexpected query message AMT gateway interface should not receive unexpected query messages. In order to drop unexpected query messages, it checks nonce. And it also checks ready4 and ready6 variables to drop duplicated messages. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:08 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use READ_ONCE() in amt module There are some data races in the amt module. amt->ready4, amt->ready6, and amt->status can be accessed concurrently without locks. So, it uses READ_ONCE() and WRITE_ONCE(). Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: drop unexpected query message AMT gateway interface should not receive unexpected query messages. In order to drop unexpected query messages, it checks nonce. And it also checks ready4 and ready6 variables to drop duplicated messages. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:08 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: use READ_ONCE() in amt module There are some data races in the amt module. amt->ready4, amt->ready6, and amt->status can be accessed concurrently without locks. So, it uses READ_ONCE() and WRITE_ONCE(). Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:05 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
net: dev: Makes sure netif_rx() can be invoked in any context. Dave suggested a while ago (eleven years by now) "Let's make netif_rx() work in all contexts and get rid of netif_rx_ni()". Eric agreed and pointed out that modern devices should use netif_receive_skb() to avoid the overhead. In the meantime someone added another variant, netif_rx_any_context(), which behaves as suggested. netif_rx() must be invoked with disabled bottom halves to ensure that pending softirqs, which were raised within the function, are handled. netif_rx_ni() can be invoked only from process context (bottom halves must be enabled) because the function handles pending softirqs without checking if bottom halves were disabled or not. netif_rx_any_context() invokes on the former functions by checking in_interrupts(). netif_rx() could be taught to handle both cases (disabled and enabled bottom halves) by simply disabling bottom halves while invoking netif_rx_internal(). The local_bh_enable() invocation will then invoke pending softirqs only if the BH-disable counter drops to zero. Eric is concerned about the overhead of BH-disable+enable especially in regard to the loopback driver. As critical as this driver is, it will receive a shortcut to avoid the additional overhead which is not needed. Add a local_bh_disable() section in netif_rx() to ensure softirqs are handled if needed. Provide __netif_rx() which does not disable BH and has a lockdep assert to ensure that interrupts are disabled. Use this shortcut in the loopback driver and in drivers/net/*.c. Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they can be removed once they are no more users left. Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-12 00:38:38 +01:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix return value of amt_update_handler() If a relay receives an update message, it lookup a tunnel. and if there is no tunnel for that message, it should be treated as an error, not a success. But amt_update_handler() returns false, which means success. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-23 16:17:07 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix wrong usage of pskb_may_pull() It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:06 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
net: dev: Makes sure netif_rx() can be invoked in any context. Dave suggested a while ago (eleven years by now) "Let's make netif_rx() work in all contexts and get rid of netif_rx_ni()". Eric agreed and pointed out that modern devices should use netif_receive_skb() to avoid the overhead. In the meantime someone added another variant, netif_rx_any_context(), which behaves as suggested. netif_rx() must be invoked with disabled bottom halves to ensure that pending softirqs, which were raised within the function, are handled. netif_rx_ni() can be invoked only from process context (bottom halves must be enabled) because the function handles pending softirqs without checking if bottom halves were disabled or not. netif_rx_any_context() invokes on the former functions by checking in_interrupts(). netif_rx() could be taught to handle both cases (disabled and enabled bottom halves) by simply disabling bottom halves while invoking netif_rx_internal(). The local_bh_enable() invocation will then invoke pending softirqs only if the BH-disable counter drops to zero. Eric is concerned about the overhead of BH-disable+enable especially in regard to the loopback driver. As critical as this driver is, it will receive a shortcut to avoid the additional overhead which is not needed. Add a local_bh_disable() section in netif_rx() to ensure softirqs are handled if needed. Provide __netif_rx() which does not disable BH and has a lockdep assert to ensure that interrupts are disabled. Use this shortcut in the loopback driver and in drivers/net/*.c. Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they can be removed once they are no more users left. Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-12 00:38:38 +01:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: do not use amt->nr_tunnels outside of lock amt->nr_tunnels is protected by amt->lock. But, amt_request_handler() has been using this variable without the amt->lock. So, it expands context of amt->lock in the amt_request_handler() to protect amt->nr_tunnels variable. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:10 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: do not use amt->nr_tunnels outside of lock amt->nr_tunnels is protected by amt->lock. But, amt_request_handler() has been using this variable without the amt->lock. So, it expands context of amt->lock in the amt_request_handler() to protect amt->nr_tunnels variable. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:10 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: do not use amt->nr_tunnels outside of lock amt->nr_tunnels is protected by amt->lock. But, amt_request_handler() has been using this variable without the amt->lock. So, it expands context of amt->lock in the amt_request_handler() to protect amt->nr_tunnels variable. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:10 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: do not use amt->nr_tunnels outside of lock amt->nr_tunnels is protected by amt->lock. But, amt_request_handler() has been using this variable without the amt->lock. So, it expands context of amt->lock in the amt_request_handler() to protect amt->nr_tunnels variable. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:10 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: do not use amt->nr_tunnels outside of lock amt->nr_tunnels is protected by amt->lock. But, amt_request_handler() has been using this variable without the amt->lock. So, it expands context of amt->lock in the amt_request_handler() to protect amt->nr_tunnels variable. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:10 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add mld report message handler In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: fix possible null-ptr-deref in amt_rcv() When amt interface receives amt message, it tries to obtain amt private data from sock. If there is no amt private data, it frees an skb immediately. After kfree_skb(), it increases the rx_dropped stats. But in order to use rx_dropped, amt private data is needed. So, it makes amt_rcv() to do not increase rx_dropped stats when it can not obtain amt private data. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 1a1a0e80e005 ("amt: fix possible memory leak in amt_rcv()") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-02 14:01:07 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: remove unnecessary skb pointer check The skb pointer will be checked in kfree_skb(), so remove the outside check. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220818093114.2449179-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-18 17:31:14 +08:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: Fix NULL but dereferenced coccicheck error Eliminate the following coccicheck warning: ./drivers/net/amt.c:2795:6-9: ERROR: amt is NULL but dereferenced. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05 15:12:50 +08:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use READ_ONCE() in amt module There are some data races in the amt module. amt->ready4, amt->ready6, and amt->status can be accessed concurrently without locks. So, it uses READ_ONCE() and WRITE_ONCE(). Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:05 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: Fix NULL but dereferenced coccicheck error Eliminate the following coccicheck warning: ./drivers/net/amt.c:2795:6-9: ERROR: amt is NULL but dereferenced. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05 15:12:50 +08:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: drop unexpected advertisement message AMT gateway interface should not receive unexpected advertisement messages. In order to drop these packets, it should check nonce and amt->status. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:07 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: remove unnecessary skb pointer check The skb pointer will be checked in kfree_skb(), so remove the outside check. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220818093114.2449179-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-18 17:31:14 +08:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
net: amt: Move stats allocation to core With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Move amt driver to leverage the core allocation. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20240308162606.1597287-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08 08:26:04 -08:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
netdev_features: convert NETIF_F_LLTX to dev->lltx NETIF_F_LLTX can't be changed via Ethtool and is not a feature, rather an attribute, very similar to IFF_NO_QUEUE (and hot). Free one netdev_features_t bit and make it a "hot" private flag. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-29 14:33:37 +02:00
net: rename netns_local to netns_immutable The name 'netns_local' is confusing. A following commit will export it via netlink, so let's use a more explicit name. Reported-by: Eric Dumazet <edumazet@google.com> Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-28 11:20:56 +01:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
net: amt: Move stats allocation to core With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Move amt driver to leverage the core allocation. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20240308162606.1597287-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08 08:26:04 -08:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
rtnetlink: Pack newlink() params into struct There are 4 net namespaces involved when creating links: - source netns - where the netlink socket resides, - target netns - where to put the device being created, - link netns - netns associated with the device (backend), - peer netns - netns of peer device. Currently, two nets are passed to newlink() callback - "src_net" parameter and "dev_net" (implicitly in net_device). They are set as follows, depending on netlink attributes in the request. +------------+-------------------+---------+---------+ | peer netns | IFLA_LINK_NETNSID | src_net | dev_net | +------------+-------------------+---------+---------+ | | absent | source | target | | absent +-------------------+---------+---------+ | | present | link | link | +------------+-------------------+---------+---------+ | | absent | peer | target | | present +-------------------+---------+---------+ | | present | peer | link | +------------+-------------------+---------+---------+ When IFLA_LINK_NETNSID is present, the device is created in link netns first and then moved to target netns. This has some side effects, including extra ifindex allocation, ifname validation and link events. These could be avoided if we create it in target netns from the beginning. On the other hand, the meaning of src_net parameter is ambiguous. It varies depending on how parameters are passed. It is the effective link (or peer netns) by design, but some drivers ignore it and use dev_net instead. To provide more netns context for drivers, this patch packs existing newlink() parameters, along with the source netns, link netns and peer netns, into a struct. The old "src_net" is renamed to "net" to avoid confusion with real source netns, and will be deprecated later. The use of src_net are converted to params->net trivially. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19 20:50:28 +08:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
net: Use link/peer netns in newlink() of rtnl_link_ops Add two helper functions - rtnl_newlink_link_net() and rtnl_newlink_peer_net() for netns fallback logic. Peer netns falls back to link netns, and link netns falls back to source netns. Convert the use of params->net in netdevice drivers to one of the helper functions for clarity. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-4-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19 20:50:29 +08:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
rtnetlink: Pack newlink() params into struct There are 4 net namespaces involved when creating links: - source netns - where the netlink socket resides, - target netns - where to put the device being created, - link netns - netns associated with the device (backend), - peer netns - netns of peer device. Currently, two nets are passed to newlink() callback - "src_net" parameter and "dev_net" (implicitly in net_device). They are set as follows, depending on netlink attributes in the request. +------------+-------------------+---------+---------+ | peer netns | IFLA_LINK_NETNSID | src_net | dev_net | +------------+-------------------+---------+---------+ | | absent | source | target | | absent +-------------------+---------+---------+ | | present | link | link | +------------+-------------------+---------+---------+ | | absent | peer | target | | present +-------------------+---------+---------+ | | present | peer | link | +------------+-------------------+---------+---------+ When IFLA_LINK_NETNSID is present, the device is created in link netns first and then moved to target netns. This has some side effects, including extra ifindex allocation, ifname validation and link events. These could be avoided if we create it in target netns from the beginning. On the other hand, the meaning of src_net parameter is ambiguous. It varies depending on how parameters are passed. It is the effective link (or peer netns) by design, but some drivers ignore it and use dev_net instead. To provide more netns context for drivers, this patch packs existing newlink() parameters, along with the source netns, link netns and peer netns, into a struct. The old "src_net" is renamed to "net" to avoid confusion with real source netns, and will be deprecated later. The use of src_net are converted to params->net trivially. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19 20:50:28 +08:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
net: Use link/peer netns in newlink() of rtnl_link_ops Add two helper functions - rtnl_newlink_link_net() and rtnl_newlink_peer_net() for netns fallback logic. Peer netns falls back to link netns, and link netns falls back to source netns. Convert the use of params->net in netdevice drivers to one of the helper functions for clarity. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-4-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19 20:50:29 +08:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
net: Use link/peer netns in newlink() of rtnl_link_ops Add two helper functions - rtnl_newlink_link_net() and rtnl_newlink_peer_net() for netns fallback logic. Peer netns falls back to link netns, and link netns falls back to source netns. Convert the use of params->net in netdevice drivers to one of the helper functions for clarity. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-4-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-19 20:50:29 +08:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
net: convert to nla_get_*_default() Most of the original conversion is from the spatch below, but I edited some and left out other instances that were either buggy after conversion (where default values don't fit into the type) or just looked strange. @@ expression attr, def; expression val; identifier fn =~ "^nla_get_.*"; fresh identifier dfn = fn ## "_default"; @@ ( -if (attr) - val = fn(attr); -else - val = def; +val = dfn(attr, def); | -if (!attr) - val = def; -else - val = fn(attr); +val = dfn(attr, def); | -if (!attr) - return def; -return fn(attr); +return dfn(attr, def); | -attr ? fn(attr) : def +dfn(attr, def) | -!attr ? def : fn(attr) +dfn(attr, def) ) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org> Link: https://patch.msgid.link/20241108114145.0580b8684e7f.I740beeaa2f70ebfc19bfca1045a24d6151992790@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-08 11:41:45 +01:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
net: convert to nla_get_*_default() Most of the original conversion is from the spatch below, but I edited some and left out other instances that were either buggy after conversion (where default values don't fit into the type) or just looked strange. @@ expression attr, def; expression val; identifier fn =~ "^nla_get_.*"; fresh identifier dfn = fn ## "_default"; @@ ( -if (attr) - val = fn(attr); -else - val = def; +val = dfn(attr, def); | -if (!attr) - val = def; -else - val = fn(attr); +val = dfn(attr, def); | -if (!attr) - return def; -return fn(attr); +return dfn(attr, def); | -attr ? fn(attr) : def +dfn(attr, def) | -!attr ? def : fn(attr) +dfn(attr, def) ) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org> Link: https://patch.msgid.link/20241108114145.0580b8684e7f.I740beeaa2f70ebfc19bfca1045a24d6151992790@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-08 11:41:45 +01:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
igmp: Fix data-races around sysctl_igmp_qrv. While reading sysctl_igmp_qrv, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. This test can be packed into a helper, so such changes will be in the follow-up series after net is merged into net-next. qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv); Fixes: a9fe8e29945d ("ipv4: implement igmp_qrv sysctl to tune igmp robustness variable") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-15 10:17:44 -07:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: add data plane of amt interface Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:03 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: use workqueue for gateway side message handling There are some synchronization issues(amt->status, amt->req_cnt, etc) if the interface is in gateway mode because gateway message handlers are processed concurrently. This applies a work queue for processing these messages instead of expanding the locking context. So, the purposes of this patch are to fix exist race conditions and to make gateway to be able to validate a gateway status more correctly. When the AMT gateway interface is created, it tries to establish to relay. The establishment step looks stateless, but it should be managed well. In order to handle messages in the gateway, it saves the current status(i.e. AMT_STATUS_XXX). This patch makes gateway code to be worked with a single thread. Now, all messages except the multicast are triggered(received or delay expired), and these messages will be stored in the event queue(amt->events). Then, the single worker processes stored messages asynchronously one by one. The multicast data message type will be still processed immediately. Now, amt->lock is only needed to access the event queue(amt->events) if an interface is the gateway mode. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-17 16:09:03 +00:00
amt: fix error return code in amt_init() Return error code when alloc_workqueue() fails in amt_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20211102130353.1666999-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-02 21:03:53 +08:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: fix error return code in amt_init() Return error code when alloc_workqueue() fails in amt_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20211102130353.1666999-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-02 21:03:53 +08:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
amt: cancel delayed_work synchronously in amt_fini() When the amt module is being removed, it calls cancel_delayed_work() to cancel pending delayed_work. But this function doesn't wait for canceling delayed_work. So, workers can be still doing after module delete. In order to avoid this, cancel_delayed_work_sync() should be used instead. Suggested-by: Jakub Kicinski <kuba@kernel.org> Fixes: bc54e49c140b ("amt: add multicast(IGMP) report message handler") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20211116160923.25258-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16 16:09:23 +00:00
amt: add multicast(IGMP) report message handler amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:04 +00:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00
net: fill in MODULE_DESCRIPTION()s under drivers/net/ W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27 14:13:11 -07:00
amt: add control plane of amt interface It adds definitions and control plane code for AMT. this is very similar to udp tunneling interfaces such as gtp, vxlan, etc. In the next patch, data plane code will be added. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-31 16:00:02 +00:00