linux

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2019-05-27 08:55:01 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-02-09 23:24:49 +09:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: ipv6: Standardize prefixes for message logging Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-05-15 14:11:53 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] capable/capability.h (net/) net: Use <linux/capability.h> where capable() is used. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-01-11 12:17:47 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

2010-03-24 17:04:11 +09:00

Replace <asm/uaccess.h> with <linux/uaccess.h> globally This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2016-12-24 11:46:01 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[NET]: Change 1500 to ETH_DATA_LEN in some files These patches add the header linux/if_ether.h and change 1500 to ETH_DATA_LEN in some files. Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>

2006-01-05 16:35:42 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

GRE: Refactor GRE tunneling code. Following patch refactors GRE code into ip tunneling code and GRE specific code. Common tunneling code is moved to ip_tunnel module. ip_tunnel module is written as generic library which can be used by different tunneling implementations. ip_tunnel module contains following components: - packet xmit and rcv generic code. xmit flow looks like (gre_xmit/ipip_xmit)->ip_tunnel_xmit->ip_local_out. - hash table of all devices. - lookup for tunnel devices. - control plane operations like device create, destroy, ioctl, netlink operations code. - registration for tunneling modules, like gre, ipip etc. - define single pcpu_tstats dev->tstats. - struct tnl_ptk_info added to pass parsed tunnel packet parameters. ipip.h header is renamed to ip_tunnel.h Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-03-25 14:49:35 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[SIT]: Introduce empty struct sit_net and init/exit net ops. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:17 -07:00

net: move misc netdev_lock flavors to a separate header Move the more esoteric helpers for netdev instance lock to a dedicated header. This avoids growing netdevice.h to infinity and makes rebuilding the kernel much faster (after touching the header with the helpers). The main netdev_lock() / netdev_unlock() functions are used in static inlines in netdevice.h and will probably be used most commonly, so keep them in netdevice.h. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-03-07 10:30:06 -08:00

ipv6: sit: Unmask upper DSCP bits in ipip6_tunnel_xmit() The function calls flowi4_init_output() to initialize an IPv4 flow key with which it then performs a FIB lookup using ip_route_output_flow(). The 'tos' variable with which the TOS value in the IPv4 flow key (flowi4_tos) is initialized contains the full DS field. Unmask the upper DSCP bits so that in the future the FIB lookup could be performed according to the full DSCP value. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-08-29 09:54:56 +03:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: resolve symbol conflicts with generic hashtable.h This is a preparatory patch for converting qdisc linked list into a hashtable. As we'll need to include hashtable.h in netdevice.h, we first have to make sure that this will not introduce symbol conflicts for any of the netdevice.h users. Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-08-10 11:03:35 +02:00

[IPV6]: Misc endianness annotations. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>

2006-11-14 20:56:00 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ip6tnl/sit: drop packet if ECN present with not-ECT This patch reports the change made by Stephen Hemminger in ipip and gre[6] in commit eccc1bb8d4b4 (tunnel: drop packet if ECN present with not-ECT). Goal is to handle RFC6040, Section 4.2: Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. The patch takes benefits from common function added in net/inet_ecn.h. Like it was done for Xin4 tunnels, it adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Errors are also tracked via rx_frame_error. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-27 03:07:11 +00:00

sit: percpu stats accounting Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-27 00:38:18 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: percpu stats accounting Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-27 00:38:18 +00:00

ipv6: add anti-spoofing checks for 6to4 and 6rd This patch adds anti-spoofing checks in sit.c as specified in RFC3964 section 5.2 for 6to4 and RFC5969 section 12 for 6rd. I left out the checks which could easily be implemented with netfilter. Specifically this patch adds following logic (based loosely on the pseudocode in RFC3964 section 5.2): if prefix (inner_src_v6) == rd6_prefix (2002::/16 is the default) and outer_src_v4 != embedded_ipv4 (inner_src_v6) drop if prefix (inner_dst_v6) == rd6_prefix (or 2002::/16 is the default) and outer_dst_v4 != embedded_ipv4 (inner_dst_v6) drop accept To accomplish the specified security checks proposed by above RFCs, it is still necessary to employ uRPF filters with netfilter. These new checks only kick in if the employed addresses are within the 2002::/16 or another range specified by the 6rd-prefix (which defaults to 2002::/16). Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-01-29 08:24:25 +00:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

netns: make struct pernet_operations::id unsigned int Make struct pernet_operations::id unsigned. There are 2 reasons to do so: 1) This field is really an index into an zero based array and thus is unsigned entity. Using negative value is out-of-bound access by definition. 2) On x86_64 unsigned 32-bit data which are mixed with pointers via array indexing or offsets added or subtracted to pointers are preffered to signed 32-bit data. "int" being used as an array index needs to be sign-extended to 64-bit before being used. void f(long *p, int i) { g(p[i]); } roughly translates to movsx rsi, esi mov rdi, [rsi+...] call g MOVSX is 3 byte instruction which isn't necessary if the variable is unsigned because x86_64 is zero extending by default. Now, there is net_generic() function which, you guessed it right, uses "int" as an array index: static inline void *net_generic(const struct net *net, int id) { ... ptr = ng->ptr[id - 1]; ... } And this function is used a lot, so those sign extensions add up. Patch snipes ~1730 bytes on allyesconfig kernel (without all junk messing with code generation): add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) Unfortunately some functions actually grow bigger. This is a semmingly random artefact of code generation with register allocator being used differently. gcc decides that some variable needs to live in new r8+ registers and every access now requires REX prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be used which is longer than [r8] However, overall balance is in negative direction: add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) function old new delta nfsd4_lock 3886 3959 +73 tipc_link_build_proto_msg 1096 1140 +44 mac80211_hwsim_new_radio 2776 2808 +32 tipc_mon_rcv 1032 1058 +26 svcauth_gss_legacy_init 1413 1429 +16 tipc_bcbase_select_primary 379 392 +13 nfsd4_exchange_id 1247 1260 +13 nfsd4_setclientid_confirm 782 793 +11 ... put_client_renew_locked 494 480 -14 ip_set_sockfn_get 730 716 -14 geneve_sock_add 829 813 -16 nfsd4_sequence_done 721 703 -18 nlmclnt_lookup_host 708 686 -22 nfsd4_lockt 1085 1063 -22 nfs_get_client 1077 1050 -27 tcf_bpf_init 1106 1076 -30 nfsd4_encode_fattr 5997 5930 -67 Total: Before=154856051, After=154854321, chg -0.00% Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-11-17 04:58:21 +03:00

[SIT]: Introduce empty struct sit_net and init/exit net ops. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:17 -07:00

net: resolve symbol conflicts with generic hashtable.h This is a preparatory patch for converting qdisc linked list into a hashtable. As we'll need to include hashtable.h in netdevice.h, we first have to make sure that this will not introduce symbol conflicts for any of the netdevice.h users. Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-08-10 11:03:35 +02:00

sit: get rid of ipip6_lock As RTNL is held while doing tunnels inserts and deletes, we can remove ipip6_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-15 11:35:10 +00:00

[SIT]: Make tunnels hashes per-net. Just move all the hashes on the sit_net structure and patch the rest of the code appropriately. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:16:38 -07:00

[SIT]: Make the fallback tunnel device per-net Allocate and register one in sit_init_net, use sitn->fb_tunnel_dev over the code and unregister one in sit_exit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:16:18 -07:00

[SIT]: Introduce empty struct sit_net and init/exit net ops. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:17 -07:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ipv6 sit: RCU conversion phase II SIT tunnels use one rwlock to protect their hash tables. This locking scheme can be converted to RCU for free, since netdevice already must wait for a RCU grace period at dismantle time. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:52:14 +00:00

net/ipv6/sit.c: Checkpatch cleanup sit.c:118: ERROR: "foo * bar" should be "foo *bar" sit.c:694: ERROR: "(foo*)" should be "(foo *)" sit.c:724: ERROR: "(foo*)" should be "(foo *)" Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-04-01 07:49:01 +00:00

net: sit: Update lookup to handle links set to L3 slave Using SIT tunnels with VRFs works fine if the underlay device is in a VRF and the link parameter is set to the VRF device. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev myvrf Update the device check to allow the link to be the enslaved device as well. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev eth4 where eth4 is enslaved to myvrf. Reported-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-10-30 10:07:17 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: get rid of ipip6_lock As RTNL is held while doing tunnels inserts and deletes, we can remove ipip6_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-15 11:35:10 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[SIT]: Make tunnels hashes per-net. Just move all the hashes on the sit_net structure and patch the rest of the code appropriately. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:16:38 -07:00

net: sit: Update lookup to handle links set to L3 slave Using SIT tunnels with VRFs works fine if the underlay device is in a VRF and the link parameter is set to the VRF device. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev myvrf Update the device check to allow the link to be the enslaved device as well. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev eth4 where eth4 is enslaved to myvrf. Reported-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-10-30 10:07:17 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: unify for_each_ip_tunnel_rcu() The defitions of for_each_ip_tunnel_rcu() are same, so unify it. Also, don't hide the parameter 't'. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-11 21:52:34 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: strictly restrict incoming traffic to tunnel link device Check link device when looking up a tunnel. When a tunnel is linked to a interface, traffic from a different interface must not reach the tunnel. This also allows creating of multiple tunnels with the same endpoints, if the link device differs. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-05-19 12:56:49 +00:00

net: sit: Update lookup to handle links set to L3 slave Using SIT tunnels with VRFs works fine if the underlay device is in a VRF and the link parameter is set to the VRF device. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev myvrf Update the device check to allow the link to be the enslaved device as well. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev eth4 where eth4 is enslaved to myvrf. Reported-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-10-30 10:07:17 -07:00

sit: strictly restrict incoming traffic to tunnel link device Check link device when looking up a tunnel. When a tunnel is linked to a interface, traffic from a different interface must not reach the tunnel. This also allows creating of multiple tunnels with the same endpoints, if the link device differs. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-05-19 12:56:49 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: unify for_each_ip_tunnel_rcu() The defitions of for_each_ip_tunnel_rcu() are same, so unify it. Also, don't hide the parameter 't'. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-11 21:52:34 +00:00

sit: strictly restrict incoming traffic to tunnel link device Check link device when looking up a tunnel. When a tunnel is linked to a interface, traffic from a different interface must not reach the tunnel. This also allows creating of multiple tunnels with the same endpoints, if the link device differs. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-05-19 12:56:49 +00:00

net: sit: Update lookup to handle links set to L3 slave Using SIT tunnels with VRFs works fine if the underlay device is in a VRF and the link parameter is set to the VRF device. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev myvrf Update the device check to allow the link to be the enslaved device as well. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev eth4 where eth4 is enslaved to myvrf. Reported-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-10-30 10:07:17 -07:00

sit: strictly restrict incoming traffic to tunnel link device Check link device when looking up a tunnel. When a tunnel is linked to a interface, traffic from a different interface must not reach the tunnel. This also allows creating of multiple tunnels with the same endpoints, if the link device differs. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-05-19 12:56:49 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: unify for_each_ip_tunnel_rcu() The defitions of for_each_ip_tunnel_rcu() are same, so unify it. Also, don't hide the parameter 't'. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-11 21:52:34 +00:00

sit: strictly restrict incoming traffic to tunnel link device Check link device when looking up a tunnel. When a tunnel is linked to a interface, traffic from a different interface must not reach the tunnel. This also allows creating of multiple tunnels with the same endpoints, if the link device differs. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-05-19 12:56:49 +00:00

net: sit: Update lookup to handle links set to L3 slave Using SIT tunnels with VRFs works fine if the underlay device is in a VRF and the link parameter is set to the VRF device. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev myvrf Update the device check to allow the link to be the enslaved device as well. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev eth4 where eth4 is enslaved to myvrf. Reported-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-10-30 10:07:17 -07:00

sit: strictly restrict incoming traffic to tunnel link device Check link device when looking up a tunnel. When a tunnel is linked to a interface, traffic from a different interface must not reach the tunnel. This also allows creating of multiple tunnels with the same endpoints, if the link device differs. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-05-19 12:56:49 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6 sit: RCU conversion phase II SIT tunnels use one rwlock to protect their hash tables. This locking scheme can be converted to RCU for free, since netdevice already must wait for a RCU grace period at dismantle time. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:52:14 +00:00

ipv6: coding style: comparison for inequality with NULL The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-03-29 14:00:05 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPV6] SIT: Unify code path to get hash array index. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2007-04-24 20:44:47 +09:00

sit: get rid of ipip6_lock As RTNL is held while doing tunnels inserts and deletes, we can remove ipip6_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-15 11:35:10 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[SIT]: Make tunnels hashes per-net. Just move all the hashes on the sit_net structure and patch the rest of the code appropriately. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:16:38 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: get rid of ipip6_lock As RTNL is held while doing tunnels inserts and deletes, we can remove ipip6_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-15 11:35:10 +00:00

[SIT]: Add net/sit_net argument to some functions. ... to make them prepared for future hashes and fallback device move on the struct sit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:39 -07:00

[IPV6] SIT: Unify code path to get hash array index. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2007-04-24 20:44:47 +09:00

[SIT]: Add net/sit_net argument to some functions. ... to make them prepared for future hashes and fallback device move on the struct sit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:39 -07:00

[IPV6] SIT: Unify code path to get hash array index. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2007-04-24 20:44:47 +09:00

[SIT]: Add net/sit_net argument to some functions. ... to make them prepared for future hashes and fallback device move on the struct sit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:39 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: get rid of ipip6_lock As RTNL is held while doing tunnels inserts and deletes, we can remove ipip6_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-15 11:35:10 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: get rid of ipip6_lock As RTNL is held while doing tunnels inserts and deletes, we can remove ipip6_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-15 11:35:10 +00:00

net: reintroduce missing rcu_assign_pointer() calls commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER) did a lot of incorrect changes, since it did a complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x, y). We miss needed barriers, even on x86, when y is not NULL. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-01-12 04:41:32 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[SIT]: Add net/sit_net argument to some functions. ... to make them prepared for future hashes and fallback device move on the struct sit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:39 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: get rid of ipip6_lock As RTNL is held while doing tunnels inserts and deletes, we can remove ipip6_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-15 11:35:10 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: reintroduce missing rcu_assign_pointer() calls commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER) did a lot of incorrect changes, since it did a complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x, y). We miss needed barriers, even on x86, when y is not NULL. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-01-12 04:41:32 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6 sit: Ensure to initialize 6rd parameters. ipv6 sit: Ensure to initialize 6rd parameters. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-11 03:31:34 +00:00

ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-22 23:43:14 +00:00

ipv6 sit: Ensure to initialize 6rd parameters. ipv6 sit: Ensure to initialize 6rd parameters. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-11 03:31:34 +00:00

net: do not create fallback tunnels for non-default namespaces fallback tunnels (like tunl0, gre0, gretap0, erspan0, sit0, ip6tnl0, ip6gre0) are automatically created when the corresponding module is loaded. These tunnels are also automatically created when a new network namespace is created, at a great cost. In many cases, netns are used for isolation purposes, and these extra network devices are a waste of resources. We are using thousands of netns per host, and hit the netns creation/delete bottleneck a lot. (Many thanks to Kirill for recent work on this) Add a new sysctl so that we can opt-out from this automatic creation. Note that these tunnels are still created for the initial namespace, to be the least intrusive for typical setups. Tested: lpk43:~# cat add_del_unshare.sh for i in `seq 1 40` do (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) & done wait lpk43:~# echo 0 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m37.521s user 0m0.886s sys 7m7.084s lpk43:~# echo 1 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m4.761s user 0m0.851s sys 1m8.343s lpk43:~# Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-03-08 12:51:41 -08:00

ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-22 23:43:14 +00:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

net: ipv6: Use link netns in newlink() of rtnl_link_ops When link_net is set, use it as link netns instead of dev_net(). This prepares for rtnetlink core to create device in target netns directly, in which case the two namespaces may be different. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-9-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-02-19 20:50:34 +08:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

ip: use dev_addr_set() in tunnels Use dev_addr_set() instead of writing to netdev->dev_addr directly in ip tunnels drivers. Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2021-10-12 09:06:34 -07:00

sit: Use ipip6_tunnel_init as the ndo_init function. ipip6_tunnel_init() sets the dev->iflink via a call to ipip6_tunnel_bind_dev(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ipip6_tunnel_init() as the ndo_init function. Then ipip6_tunnel_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-11-03 09:19:29 +01:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

ip_tunnel: convert __be16 tunnel flags to bitmaps Historically, tunnel flags like TUNNEL_CSUM or TUNNEL_ERSPAN_OPT have been defined as __be16. Now all of those 16 bits are occupied and there's no more free space for new flags. It can't be simply switched to a bigger container with no adjustments to the values, since it's an explicit Endian storage, and on LE systems (__be16)0x0001 equals to (__be64)0x0001000000000000. We could probably define new 64-bit flags depending on the Endianness, i.e. (__be64)0x0001 on BE and (__be64)0x00010000... on LE, but that would introduce an Endianness dependency and spawn a ton of Sparse warnings. To mitigate them, all of those places which were adjusted with this change would be touched anyway, so why not define stuff properly if there's no choice. Define IP_TUNNEL_*_BIT counterparts as a bit number instead of the value already coded and a fistful of <16 <-> bitmap> converters and helpers. The two flags which have a different bit position are SIT_ISATAP_BIT and VTI_ISVTI_BIT, as they were defined not as __cpu_to_be16(), but as (__force __be16), i.e. had different positions on LE and BE. Now they both have strongly defined places. Change all __be16 fields which were used to store those flags, to IP_TUNNEL_DECLARE_FLAGS() -> DECLARE_BITMAP(__IP_TUNNEL_FLAG_NUM) -> unsigned long[1] for now, and replace all TUNNEL_* occurrences to their bitmap counterparts. Use the converters in the places which talk to the userspace, hardware (NFP) or other hosts (GRE header). The rest must explicitly use the new flags only. This must be done at once, otherwise there will be too many conversions throughout the code in the intermediate commits. Finally, disable the old __be16 flags for use in the kernel code (except for the two 'irregular' flags mentioned above), to prevent any accidental (mis)use of them. For the userspace, nothing is changed, only additions were made. Most noticeable bloat-o-meter difference (.text): vmlinux: 307/-1 (306) gre.ko: 62/0 (62) ip_gre.ko: 941/-217 (724) [*] ip_tunnel.ko: 390/-900 (-510) [**] ip_vti.ko: 138/0 (138) ip6_gre.ko: 534/-18 (516) [*] ip6_tunnel.ko: 118/-10 (108) [*] gre_flags_to_tnl_flags() grew, but still is inlined [**] ip_tunnel_find() got uninlined, hence such decrease The average code size increase in non-extreme case is 100-200 bytes per module, mostly due to sizeof(long) > sizeof(__be16), as %__IP_TUNNEL_FLAG_NUM is less than %BITS_PER_LONG and the compilers are able to expand the majority of bitmap_*() calls here into direct operations on scalars. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:53 +01:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: set rtnl_link_ops before calling register_netdevice When creating a SIT tunnel with ip tunnel, rtnl_link_ops is not set before ipip6_tunnel_create is called. When register_netdevice is called, there is no linkinfo attribute in the NEWLINK message because of that. Setting rtnl_link_ops before calling register_netdevice fixes that. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-01-25 11:29:19 -02:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: Use ipip6_tunnel_init as the ndo_init function. ipip6_tunnel_init() sets the dev->iflink via a call to ipip6_tunnel_bind_dev(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ipip6_tunnel_init() as the ndo_init function. Then ipip6_tunnel_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-11-03 09:19:29 +01:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: get rid of ipip6_lock As RTNL is held while doing tunnels inserts and deletes, we can remove ipip6_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-15 11:35:10 +00:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPV6]: Misc endianness annotations. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>

2006-11-14 20:56:00 -08:00

sit: get rid of ipip6_lock As RTNL is held while doing tunnels inserts and deletes, we can remove ipip6_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-15 11:35:10 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[SIT]: Add net/sit_net argument to some functions. ... to make them prepared for future hashes and fallback device move on the struct sit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:39 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: get rid of ipip6_lock As RTNL is held while doing tunnels inserts and deletes, we can remove ipip6_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-15 11:35:10 +00:00

sit: Fail to create tunnel, if it already exists When locating the tunnel, do not continue if it is found. Otherwise a different tunnel with similar configuration would be returned and parts could be overwritten. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-05-19 12:56:48 +00:00

sit: strictly restrict incoming traffic to tunnel link device Check link device when looking up a tunnel. When a tunnel is linked to a interface, traffic from a different interface must not reach the tunnel. This also allows creating of multiple tunnels with the same endpoints, if the link device differs. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-05-19 12:56:49 +00:00

sit: Fail to create tunnel, if it already exists When locating the tunnel, do not continue if it is found. Otherwise a different tunnel with similar configuration would be returned and parts could be overwritten. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-05-19 12:56:48 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6: sit: better validate user provided tunnel names Use dev_valid_name() to make sure user does not provide illegal device name. syzbot caught the following bug : BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254 Write of size 33 at addr ffff8801b64076d8 by task syzkaller932654/4453 CPU: 0 PID: 4453 Comm: syzkaller932654 Not tainted 4.16.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x1b9/0x29f lib/dump_stack.c:53 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254 ipip6_tunnel_ioctl+0xe71/0x241b net/ipv6/sit.c:1221 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525 sock_ioctl+0x47e/0x680 net/socket.c:1015 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 SYSC_ioctl fs/ioctl.c:708 [inline] SyS_ioctl+0x24/0x30 fs/ioctl.c:706 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-04-05 06:39:28 -07:00

ipv6: move from strlcpy with unused retval to strscpy Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210220.8491-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2022-08-18 23:02:20 +02:00

ipv6: sit: better validate user provided tunnel names Use dev_valid_name() to make sure user does not provide illegal device name. syzbot caught the following bug : BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254 Write of size 33 at addr ffff8801b64076d8 by task syzkaller932654/4453 CPU: 0 PID: 4453 Comm: syzkaller932654 Not tainted 4.16.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x1b9/0x29f lib/dump_stack.c:53 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254 ipip6_tunnel_ioctl+0xe71/0x241b net/ipv6/sit.c:1221 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525 sock_ioctl+0x47e/0x680 net/socket.c:1015 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 SYSC_ioctl fs/ioctl.c:708 [inline] SyS_ioctl+0x24/0x30 fs/ioctl.c:706 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-04-05 06:39:28 -07:00

sit: percpu stats accounting Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-27 00:38:18 +00:00

ipv6: sit: better validate user provided tunnel names Use dev_valid_name() to make sure user does not provide illegal device name. syzbot caught the following bug : BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254 Write of size 33 at addr ffff8801b64076d8 by task syzkaller932654/4453 CPU: 0 PID: 4453 Comm: syzkaller932654 Not tainted 4.16.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x1b9/0x29f lib/dump_stack.c:53 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254 ipip6_tunnel_ioctl+0xe71/0x241b net/ipv6/sit.c:1221 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525 sock_ioctl+0x47e/0x680 net/socket.c:1015 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 SYSC_ioctl fs/ioctl.c:708 [inline] SyS_ioctl+0x24/0x30 fs/ioctl.c:706 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-04-05 06:39:28 -07:00

net: set name_assign_type in alloc_netdev() Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-07-14 16:37:24 +02:00

ipv6: coding style: comparison for equality with NULL The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-03-29 14:00:04 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[SIT]: Allow to create SIT tunnels in net namespaces. Set proper net and mark a new device as NETNS_LOCAL before registering. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:17:18 -07:00

[NET]: Convert net/{ipv4,ipv6,sched} to netdev_priv Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>

2006-01-08 22:05:26 -08:00

ipv6: convert tunnels to net_device_ops Like IPV4, convert the tunnel virtual devices to use net_device_ops. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-11-20 20:33:56 -08:00

net: ipv6: Init tunnel link-netns before registering dev Currently some IPv6 tunnel drivers set tnl->net to dev_net(dev) in ndo_init(), which is called in register_netdevice(). However, it lacks the context of link-netns when we enable cross-net tunnels at device registration time. Let's move the init of tunnel link-netns before register_netdevice(). ip6_gre has already initialized netns, so just remove the redundant assignment. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-8-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-02-19 20:50:33 +08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

[INET]: Don't create tunnels with '%' in name. Four tunnel drivers (ip_gre, ipip, ip6_tunnel and sit) can receive a pre-defined name for a device from the userspace. Since these drivers call the register_netdevice() (rtnl_lock, is held), which does _not_ generate the device's name, this name may contain a '%' character. Not sure how bad is this to have a device with a '%' in its name, but all the other places either use the register_netdev(), which call the dev_alloc_name(), or explicitly call the dev_alloc_name() before registering, i.e. do not allow for such names. This had to be prior to the commit 34cc7b, but I forgot to number the patches and this one got lost, sorry. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-02-26 23:51:04 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: set name of device back to struct parms addrconf_set_sit_dstaddr will use parms->name. Signed-off-by: zhang kai <zhangkaiheb@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-06-02 18:36:26 +08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[INET]: Don't create tunnels with '%' in name. Four tunnel drivers (ip_gre, ipip, ip6_tunnel and sit) can receive a pre-defined name for a device from the userspace. Since these drivers call the register_netdevice() (rtnl_lock, is held), which does _not_ generate the device's name, this name may contain a '%' character. Not sure how bad is this to have a device with a '%' in its name, but all the other places either use the register_netdev(), which call the dev_alloc_name(), or explicitly call the dev_alloc_name() before registering, i.e. do not allow for such names. This had to be prior to the commit 34cc7b, but I forgot to number the patches and this one got lost, sorry. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-02-26 23:51:04 -08:00

2017-05-08 12:52:56 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

[IPV6] SIT: Fix locking issues in PRL management. To protect PRL list, use ipip6_lock. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:42:57 +09:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ipv6 sit: Avoid extra need for compat layer in PRL management. We've introduced extra need of compat layer for ip_tunnel_prl{} for PRL (Potential Router List) management. Though compat_ioctl is still missing in ipv4/ipv6, let's make the interface more straight-forward and eliminate extra need for nasty compat layer anyway since the interface is new for 2.6.26. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-06-16 16:48:20 -07:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ipv6 sit: Avoid extra need for compat layer in PRL management. We've introduced extra need of compat layer for ip_tunnel_prl{} for PRL (Potential Router List) management. Though compat_ioctl is still missing in ipv4/ipv6, let's make the interface more straight-forward and eliminate extra need for nasty compat layer anyway since the interface is new for 2.6.26. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-06-16 16:48:20 -07:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

treewide: Replace kmalloc with kmalloc_obj for non-scalar types This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>

2026-02-20 23:49:23 -08:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

sit: use min Opportunity for min() Generated by: scripts/coccinelle/misc/minmax.cocci CC: Denis Efremov <efremov@linux.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-03-27 10:29:32 +01:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

treewide: Replace kmalloc with kmalloc_obj for non-scalar types This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>

2026-02-20 23:49:23 -08:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

ipv6/sit: fix ipip6_tunnel_get_prl return value When kcalloc fails, ipip6_tunnel_get_prl() should return -ENOMEM. Move the position of label "out" to return correctly. Addresses-Coverity: ("Unused value") Fixes: 300aaeeaab5f ("[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL.") Signed-off-by: katrinzhou <katrinzhou@tencent.com> Reviewed-by: Eric Dumazet<edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220628035030.1039171-1-zys.zljxml@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2022-06-28 11:50:30 +08:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

sit: fix off-by-one in ipip6_tunnel_get_prl When requesting all prl entries (kprl.addr == INADDR_ANY) and there are more prl entries than there is space passed from userspace, the existing code would always copy cmax+1 entries, which is more than can be handled. This patch makes the kernel copy only exactly cmax entries. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Acked-By: Fred L. Templin <Fred.L.Templin@boeing.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-29 11:27:05 +00:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

ipv6 sit: Avoid extra need for compat layer in PRL management. We've introduced extra need of compat layer for ip_tunnel_prl{} for PRL (Potential Router List) management. Though compat_ioctl is still missing in ipv4/ipv6, let's make the interface more straight-forward and eliminate extra need for nasty compat layer anyway since the interface is new for 2.6.26. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-06-16 16:48:20 -07:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

ipv6 sit: Avoid extra need for compat layer in PRL management. We've introduced extra need of compat layer for ip_tunnel_prl{} for PRL (Potential Router List) management. Though compat_ioctl is still missing in ipv4/ipv6, let's make the interface more straight-forward and eliminate extra need for nasty compat layer anyway since the interface is new for 2.6.26. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-06-16 16:48:20 -07:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

ipv6/sit: fix ipip6_tunnel_get_prl return value When kcalloc fails, ipip6_tunnel_get_prl() should return -ENOMEM. Move the position of label "out" to return correctly. Addresses-Coverity: ("Unused value") Fixes: 300aaeeaab5f ("[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL.") Signed-off-by: katrinzhou <katrinzhou@tencent.com> Reviewed-by: Eric Dumazet<edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220628035030.1039171-1-zys.zljxml@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2022-06-28 11:50:30 +08:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

ipv6 sit: Avoid extra need for compat layer in PRL management. We've introduced extra need of compat layer for ip_tunnel_prl{} for PRL (Potential Router List) management. Though compat_ioctl is still missing in ipv4/ipv6, let's make the interface more straight-forward and eliminate extra need for nasty compat layer anyway since the interface is new for 2.6.26. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-06-16 16:48:20 -07:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

ipv6/sit: fix ipip6_tunnel_get_prl return value When kcalloc fails, ipip6_tunnel_get_prl() should return -ENOMEM. Move the position of label "out" to return correctly. Addresses-Coverity: ("Unused value") Fixes: 300aaeeaab5f ("[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL.") Signed-off-by: katrinzhou <katrinzhou@tencent.com> Reviewed-by: Eric Dumazet<edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220628035030.1039171-1-zys.zljxml@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2022-06-28 11:50:30 +08:00

ipv6 sit: Avoid extra need for compat layer in PRL management. We've introduced extra need of compat layer for ip_tunnel_prl{} for PRL (Potential Router List) management. Though compat_ioctl is still missing in ipv4/ipv6, let's make the interface more straight-forward and eliminate extra need for nasty compat layer anyway since the interface is new for 2.6.26. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-06-16 16:48:20 -07:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

[IPV6] SIT: Fix locking issues in PRL management. To protect PRL list, use ipip6_lock. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:42:57 +09:00

[IPV6] SIT: Disallow 0.0.0.0 in PRL and Flush PRL if given for DEL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:50:59 +09:00

ipv6: get rid of ipip6_prl_lock As noticed by Julia Lawall, ipip6_tunnel_add_prl() incorrectly calls kzallloc(..., GFP_KERNEL) while a spinlock is held. She provided a patch to use GFP_ATOMIC instead. One possibility would be to convert this spinlock to a mutex, or preallocate the thing before taking the lock. After RCU conversion, it appears we dont need this lock, since caller already holds RTNL Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-06-01 00:26:58 -07:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

sit: get rid of ipip6_lock As RTNL is held while doing tunnels inserts and deletes, we can remove ipip6_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-15 11:35:10 +00:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

[IPV6] SIT: Fix locking issues in PRL management. To protect PRL list, use ipip6_lock. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:42:57 +09:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

[IPV6] SIT: Fix locking issues in PRL management. To protect PRL list, use ipip6_lock. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:42:57 +09:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/$alloc_objs*(.*$, GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2026-02-21 16:37:42 -08:00

[IPV6] SIT: Fix locking issues in PRL management. To protect PRL list, use ipip6_lock. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:42:57 +09:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

net: reintroduce missing rcu_assign_pointer() calls commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER) did a lot of incorrect changes, since it did a complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x, y). We miss needed barriers, even on x86, when y is not NULL. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-01-12 04:41:32 +00:00

[IPV6] SIT: Fix locking issues in PRL management. To protect PRL list, use ipip6_lock. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:42:57 +09:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

net: ipv6: sit: fix rcu annotations Fix minor __rcu annotations and remove sparse warnings Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-01-20 07:16:24 +00:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

net: ipv6: sit: fix rcu annotations Fix minor __rcu annotations and remove sparse warnings Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-01-20 07:16:24 +00:00

[IPV6] SIT: Fix locking issues in PRL management. To protect PRL list, use ipip6_lock. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:42:57 +09:00

ipv6: get rid of ipip6_prl_lock As noticed by Julia Lawall, ipip6_tunnel_add_prl() incorrectly calls kzallloc(..., GFP_KERNEL) while a spinlock is held. She provided a patch to use GFP_ATOMIC instead. One possibility would be to convert this spinlock to a mutex, or preallocate the thing before taking the lock. After RCU conversion, it appears we dont need this lock, since caller already holds RTNL Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-06-01 00:26:58 -07:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

[IPV6] SIT: Disallow 0.0.0.0 in PRL and Flush PRL if given for DEL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:50:59 +09:00

net: ipv6: sit: fix rcu annotations Fix minor __rcu annotations and remove sparse warnings Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-01-20 07:16:24 +00:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

net,rcu: convert call_rcu(prl_entry_destroy_rcu) to kfree The RCU callback prl_entry_destroy_rcu() just calls kfree(), so we can use kfree_rcu() instead of call_rcu(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org>

2011-05-02 00:56:57 -07:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

[IPV6] SIT: Fix locking issues in PRL management. To protect PRL list, use ipip6_lock. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:42:57 +09:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

[IPV6] SIT: Fix locking issues in PRL management. To protect PRL list, use ipip6_lock. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:42:57 +09:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

net: ipv6: sit: fix rcu annotations Fix minor __rcu annotations and remove sparse warnings Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-01-20 07:16:24 +00:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

[IPV6] SIT: Fix locking issues in PRL management. To protect PRL list, use ipip6_lock. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:42:57 +09:00

sit: ipip6_tunnel_del_prl: return err Typo. When deleting a PRL entry, return status to userspace instead of success. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-05-19 12:56:50 +00:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-04-22 04:53:02 +00:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

[IPV6] SIT: Fix locking issues in PRL management. To protect PRL list, use ipip6_lock. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:42:57 +09:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

[IPV6] SIT: Fix locking issues in PRL management. To protect PRL list, use ipip6_lock. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-22 17:42:57 +09:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-04-22 04:53:02 +00:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

[IPV6]: Unify ip6_onlink() and ipip6_onlink(). Both are identical, let's create ipv6_chk_prefix() and use it in both places.

2008-03-15 22:54:23 -04:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: add support of x-netns This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-26 16:11:28 +02:00

[SIT]: Add net/sit_net argument to some functions. ... to make them prepared for future hashes and fallback device move on the struct sit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:39 -07:00

[SIT]: Make the fallback tunnel device per-net Allocate and register one in sit_init_net, use sitn->fb_tunnel_dev over the code and unregister one in sit_exit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:16:18 -07:00

rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER When assigning a NULL value to an RCU protected pointer, no barrier is needed. The rcu_assign_pointer, used to handle that but will soon change to not handle the special case. Convert all rcu_assign_pointer of NULL value. //smpl @@ expression P; @@ - rcu_assign_pointer(P, NULL) + RCU_INIT_POINTER(P, NULL) // </smpl> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-08-01 16:19:00 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: add support of x-netns This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-26 16:11:28 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ip_tunnel: replace dst_cache with generic implementation The current ip_tunnel cache implementation is prone to a race that will cause the wrong dst to be cached on cuncurrent dst cache miss and ip tunnel update via netlink. Replacing with the generic implementation fix the issue. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-12 15:43:55 +01:00

net: rename reference+tracking helpers Netdev reference helpers have a dev_ prefix for historic reasons. Renaming the old helpers would be too much churn but we can rename the tracking ones which are relatively recent and should be the default for new code. Rename: dev_hold_track() -> netdev_hold() dev_put_track() -> netdev_put() dev_replace_track() -> netdev_ref_replace() Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2022-06-07 21:39:55 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPSEC]: make sit use the xfrm4_tunnel_register This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-02-13 12:55:25 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-04-22 04:53:02 +00:00

[SK_BUFF]: Introduce icmp_hdr(), remove skb->h.icmph Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-03-13 14:43:18 -03:00

ipv6: RFC 4884 partial support for SIT/GRE tunnels When receiving an ICMPv4 message containing extensions as defined in RFC 4884, and translating it to ICMPv6 at SIT or GRE tunnel, we need some extra manipulation in order to properly forward the extensions. This patch only takes care of Time Exceeded messages as they are the ones that typically carry information from various routers in a fabric during a traceroute session. It also avoids complex skb logic if the data_len is not a multiple of 8. RFC states : The "original datagram" field MUST contain at least 128 octets. If the original datagram did not contain 128 octets, the "original datagram" field MUST be zero padded to 128 octets. In practice routers use 128 bytes of original datagram, not more. Initial translation was added in commit ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-06-18 21:52:06 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: sit: Update lookup to handle links set to L3 slave Using SIT tunnels with VRFs works fine if the underlay device is in a VRF and the link parameter is set to the VRF device. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev myvrf Update the device check to allow the link to be the enslaved device as well. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev eth4 where eth4 is enslaved to myvrf. Reported-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-10-30 10:07:17 -07:00

[IPSEC]: make sit use the xfrm4_tunnel_register This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-02-13 12:55:25 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPSEC]: make sit use the xfrm4_tunnel_register This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-02-13 12:55:25 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPSEC]: make sit use the xfrm4_tunnel_register This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-02-13 12:55:25 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPSEC]: make sit use the xfrm4_tunnel_register This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-02-13 12:55:25 -08:00

ipv6: RFC 4884 partial support for SIT/GRE tunnels When receiving an ICMPv4 message containing extensions as defined in RFC 4884, and translating it to ICMPv6 at SIT or GRE tunnel, we need some extra manipulation in order to properly forward the extensions. This patch only takes care of Time Exceeded messages as they are the ones that typically carry information from various routers in a fabric during a traceroute session. It also avoids complex skb logic if the data_len is not a multiple of 8. RFC states : The "original datagram" field MUST contain at least 128 octets. If the original datagram did not contain 128 octets, the "original datagram" field MUST be zero padded to 128 octets. In practice routers use 128 bytes of original datagram, not more. Initial translation was added in commit ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-06-18 21:52:06 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6: Add redirect support to all protocol icmp error handlers. Signed-off-by: David S. Miller <davem@davemloft.net>

2012-07-12 00:25:15 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPSEC]: make sit use the xfrm4_tunnel_register This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-02-13 12:55:25 -08:00

net: sit: Update lookup to handle links set to L3 slave Using SIT tunnels with VRFs works fine if the underlay device is in a VRF and the link parameter is set to the VRF device. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev myvrf Update the device check to allow the link to be the enslaved device as well. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev eth4 where eth4 is enslaved to myvrf. Reported-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-10-30 10:07:17 -07:00

ipv6: coding style: comparison for equality with NULL The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-03-29 14:00:04 +01:00

ipv4: Handle PMTU in all ICMP error handlers. With ip_rt_frag_needed() removed, we have to explicitly update PMTU information in every ICMP error handler. Create two helper functions to facilitate this. 1) ipv4_sk_update_pmtu() This updates the PMTU when we have a socket context to work with. 2) ipv4_update_pmtu() Raw version, used when no socket context is available. For this interface, we essentially just pass in explicit arguments for the flow identity information we would have extracted from the socket. And you'll notice that ipv4_sk_update_pmtu() is simply implemented in terms of ipv4_update_pmtu() Note that __ip_route_output_key() is used, rather than something like ip_route_output_flow() or ip_route_output_key(). This is because we absolutely do not want to end up with a route that does IPSEC encapsulation and the like. Instead, we only want the route that would get us to the node described by the outermost IP header. Reported-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-06-14 22:21:46 -07:00

net-ipv4: remove 2 always zero parameters from ipv4_update_pmtu() (the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-09-25 20:56:26 -07:00

ipv4: Handle PMTU in all ICMP error handlers. With ip_rt_frag_needed() removed, we have to explicitly update PMTU information in every ICMP error handler. Create two helper functions to facilitate this. 1) ipv4_sk_update_pmtu() This updates the PMTU when we have a socket context to work with. 2) ipv4_update_pmtu() Raw version, used when no socket context is available. For this interface, we essentially just pass in explicit arguments for the flow identity information we would have extracted from the socket. And you'll notice that ipv4_sk_update_pmtu() is simply implemented in terms of ipv4_update_pmtu() Note that __ip_route_output_key() is used, rather than something like ip_route_output_flow() or ip_route_output_key(). This is because we absolutely do not want to end up with a route that does IPSEC encapsulation and the like. Instead, we only want the route that would get us to the node described by the outermost IP header. Reported-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-06-14 22:21:46 -07:00

ipv6: Add redirect support to all protocol icmp error handlers. Signed-off-by: David S. Miller <davem@davemloft.net>

2012-07-12 00:25:15 -07:00

net-ipv4: remove 2 always zero parameters from ipv4_redirect() (the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-09-25 20:56:27 -07:00

ipv6: Add redirect support to all protocol icmp error handlers. Signed-off-by: David S. Miller <davem@davemloft.net>

2012-07-12 00:25:15 -07:00

ipv4: Handle PMTU in all ICMP error handlers. With ip_rt_frag_needed() removed, we have to explicitly update PMTU information in every ICMP error handler. Create two helper functions to facilitate this. 1) ipv4_sk_update_pmtu() This updates the PMTU when we have a socket context to work with. 2) ipv4_update_pmtu() Raw version, used when no socket context is available. For this interface, we essentially just pass in explicit arguments for the flow identity information we would have extracted from the socket. And you'll notice that ipv4_sk_update_pmtu() is simply implemented in terms of ipv4_update_pmtu() Note that __ip_route_output_key() is used, rather than something like ip_route_output_flow() or ip_route_output_key(). This is because we absolutely do not want to end up with a route that does IPSEC encapsulation and the like. Instead, we only want the route that would get us to the node described by the outermost IP header. Reported-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-06-14 22:21:46 -07:00

ipv6: translate ICMP_TIME_EXCEEDED to ICMPV6_TIME_EXCEED For better traceroute/mtr support for SIT and GRE tunnels, we translate IPV4 ICMP ICMP_TIME_EXCEEDED to ICMPV6_TIME_EXCEED We also have to translate the IPv4 source IP address of ICMP message to IPv6 v4mapped. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-06-18 21:52:04 -07:00

sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach() If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should not call ip6_err_gen_icmpv6_unreach(). This: ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1 ip link set sit1 up ip addr add 198.51.100.1/24 dev sit1 ping 198.51.100.2 if IPv6 is disabled at boot time, will crash the kernel. v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead, as we only need to check that idev exists and we are under rcu_read_lock() (from netif_receive_skb_internal()). Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error") Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 18:36:11 +08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPSEC]: make sit use the xfrm4_tunnel_register This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-02-13 12:55:25 -08:00

ipv6: translate ICMP_TIME_EXCEEDED to ICMPV6_TIME_EXCEED For better traceroute/mtr support for SIT and GRE tunnels, we translate IPV4 ICMP ICMP_TIME_EXCEEDED to ICMPV6_TIME_EXCEED We also have to translate the IPv4 source IP address of ICMP message to IPv6 v4mapped. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-06-18 21:52:04 -07:00

sit: generate icmpv6 error when receiving icmpv4 error Send icmpv6 error with type "destination unreachable" and code "address unreachable" when receiving icmpv4 error and sufficient data bytes are available This patch enhances the compliance of sit tunnel with section 3.4 of rfc 4213 Signed-off-by: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-11-22 16:23:20 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: used time_before for comparing jiffies The functions time_before is more robust for comparing jiffies against other values. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-02-24 23:37:19 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPSEC]: make sit use the xfrm4_tunnel_register This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-02-13 12:55:25 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6: add anti-spoofing checks for 6to4 and 6rd This patch adds anti-spoofing checks in sit.c as specified in RFC3964 section 5.2 for 6to4 and RFC5969 section 12 for 6rd. I left out the checks which could easily be implemented with netfilter. Specifically this patch adds following logic (based loosely on the pseudocode in RFC3964 section 5.2): if prefix (inner_src_v6) == rd6_prefix (2002::/16 is the default) and outer_src_v4 != embedded_ipv4 (inner_src_v6) drop if prefix (inner_dst_v6) == rd6_prefix (or 2002::/16 is the default) and outer_dst_v4 != embedded_ipv4 (inner_dst_v6) drop accept To accomplish the specified security checks proposed by above RFCs, it is still necessary to employ uRPF filters with netfilter. These new checks only kick in if the employed addresses are within the 2002::/16 or another range specified by the 6rd-prefix (which defaults to 2002::/16). Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-01-29 08:24:25 +00:00

$Catalin$ux$ M. BOIE$

IPv6 NAT: Do not drop DNATed 6to4/6rd packets When a router is doing DNAT for 6to4/6rd packets the latest anti-spoofing commit 218774dc ("ipv6: add anti-spoofing checks for 6to4 and 6rd") will drop them because the IPv6 address embedded does not match the IPv4 destination. This patch will allow them to pass by testing if we have an address that matches on 6to4/6rd interface. I have been hit by this problem using Fedora and IPV6TO4_IPV4ADDR. Also, log the dropped packets (with rate limit). Signed-off-by: Catalin(ux) M. BOIE <catab@embedromix.ro> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-09-23 23:04:19 +03:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6: remove unneeded check to pskb_may_pull in ipip6_rcv This is already checked by the caller (tunnel64_rcv) and brings ipip6_rcv in line with ipip_rcv. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-01-18 09:18:17 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: sit: Update lookup to handle links set to L3 slave Using SIT tunnels with VRFs works fine if the underlay device is in a VRF and the link parameter is set to the VRF device. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev myvrf Update the device check to allow the link to be the enslaved device as well. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev eth4 where eth4 is enslaved to myvrf. Reported-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-10-30 10:07:17 -07:00

ip6tnl/sit: drop packet if ECN present with not-ECT This patch reports the change made by Stephen Hemminger in ipip and gre[6] in commit eccc1bb8d4b4 (tunnel: drop packet if ECN present with not-ECT). Goal is to handle RFC6040, Section 4.2: Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. The patch takes benefits from common function added in net/inet_ecn.h. Like it was done for Xin4 tunnels, it adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Errors are also tracked via rx_frame_error. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-27 03:07:11 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: sit: Update lookup to handle links set to L3 slave Using SIT tunnels with VRFs works fine if the underlay device is in a VRF and the link parameter is set to the VRF device. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev myvrf Update the device check to allow the link to be the enslaved device as well. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev eth4 where eth4 is enslaved to myvrf. Reported-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-10-30 10:07:17 -07:00

sit: strictly restrict incoming traffic to tunnel link device Check link device when looking up a tunnel. When a tunnel is linked to a interface, traffic from a different interface must not reach the tunnel. This also allows creating of multiple tunnels with the same endpoints, if the link device differs. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-05-19 12:56:49 +00:00

net: sit: Update lookup to handle links set to L3 slave Using SIT tunnels with VRFs works fine if the underlay device is in a VRF and the link parameter is set to the VRF device. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev myvrf Update the device check to allow the link to be the enslaved device as well. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev eth4 where eth4 is enslaved to myvrf. Reported-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-10-30 10:07:17 -07:00

ipv6: coding style: comparison for inequality with NULL The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-03-29 14:00:05 +01:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

[SK_BUFF]: unions of just one member don't get anything done, kill them Renaming skb->h to skb->transport_header, skb->nh to skb->network_header and skb->mac to skb->mac_header, to match the names of the associated helpers (skb[_[re]set]_{transport,network,mac}_header). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-04-10 21:21:55 -07:00

[SK_BUFF]: Introduce skb_reset_network_header(skb) For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-04-10 20:45:18 -07:00

[IPV4]: reset IPCB flags when neccessary Reset IPSKB_XFRM_TUNNEL_SIZE flags in ipip and ip_gre hard_start_xmit function before the packet reenters IP. This is neccessary so the encapsulated packets are checked not to be oversized in xfrm4_output.c again. Reset all flags in sit when a packet changes its address family. Also remove some obsolete IPSKB flags. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>

2006-01-06 23:04:01 -08:00

tunnels: Remove encapsulation offloads on decap. If a packet is either locally encapsulated or processed through GRO it is marked with the offloads that it requires. However, when it is decapsulated these tunnel offload indications are not removed. This means that if we receive an encapsulated TCP packet, aggregate it with GRO, decapsulate, and retransmit the resulting frame on a NIC that does not support encapsulation, we won't be able to take advantage of hardware offloads even though it is just a simple TCP packet at this point. This fixes the problem by stripping off encapsulation offload indications when packets are decapsulated. The performance impacts of this bug are significant. In a test where a Geneve encapsulated TCP stream is sent to a hypervisor, GRO'ed, decapsulated, and bridged to a VM performance is improved by 60% (5Gbps->8Gbps) as a result of avoiding unnecessary segmentation at the VM tap interface. Reported-by: Ramu Ramamurthy <sramamur@linux.vnet.ibm.com> Fixes: 68c33163 ("v4 GRE: Add TCP segmentation offload for GRE") Signed-off-by: Jesse Gross <jesse@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-03-19 09:32:02 -07:00

[IPV6]: Add RFC4214 support This patch includes support for the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) per RFC4214. It uses the SIT module, and is configured using extensions to the "iproute2" utility. The diffs are specific to the Linux 2.6.24-rc2 kernel distribution. This version includes the diff for ./include/linux/if.h which was missing in the v2.4 submission and is needed to make the patch compile. The patch has been installed, compiled and tested in a clean 2.6.24-rc2 kernel build area. Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-11-29 22:11:40 +11:00

$Catalin$ux$ M. BOIE$

IPv6 NAT: Do not drop DNATed 6to4/6rd packets When a router is doing DNAT for 6to4/6rd packets the latest anti-spoofing commit 218774dc ("ipv6: add anti-spoofing checks for 6to4 and 6rd") will drop them because the IPv6 address embedded does not match the IPv4 destination. This patch will allow them to pass by testing if we have an address that matches on 6to4/6rd interface. I have been hit by this problem using Fedora and IPV6TO4_IPV4ADDR. Also, log the dropped packets (with rate limit). Signed-off-by: Catalin(ux) M. BOIE <catab@embedromix.ro> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-09-23 23:04:19 +03:00

ipv6/sit: use DEV_STATS_INC() to avoid data-races syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error concurrently. This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit() is not protected by a spinlock. While original KCSAN report was about tx path, rx path has the same issue. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2022-11-15 08:53:56 +00:00

$Catalin$ux$ M. BOIE$

IPv6 NAT: Do not drop DNATed 6to4/6rd packets When a router is doing DNAT for 6to4/6rd packets the latest anti-spoofing commit 218774dc ("ipv6: add anti-spoofing checks for 6to4 and 6rd") will drop them because the IPv6 address embedded does not match the IPv4 destination. This patch will allow them to pass by testing if we have an address that matches on 6to4/6rd interface. I have been hit by this problem using Fedora and IPV6TO4_IPV4ADDR. Also, log the dropped packets (with rate limit). Signed-off-by: Catalin(ux) M. BOIE <catab@embedromix.ro> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-09-23 23:04:19 +03:00

ip6tnl/sit: drop packet if ECN present with not-ECT This patch reports the change made by Stephen Hemminger in ipip and gre[6] in commit eccc1bb8d4b4 (tunnel: drop packet if ECN present with not-ECT). Goal is to handle RFC6040, Section 4.2: Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. The patch takes benefits from common function added in net/inet_ecn.h. Like it was done for Xin4 tunnels, it adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Errors are also tracked via rx_frame_error. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-27 03:07:11 +00:00

tunnels: Remove encapsulation offloads on decap. If a packet is either locally encapsulated or processed through GRO it is marked with the offloads that it requires. However, when it is decapsulated these tunnel offload indications are not removed. This means that if we receive an encapsulated TCP packet, aggregate it with GRO, decapsulate, and retransmit the resulting frame on a NIC that does not support encapsulation, we won't be able to take advantage of hardware offloads even though it is just a simple TCP packet at this point. This fixes the problem by stripping off encapsulation offload indications when packets are decapsulated. The performance impacts of this bug are significant. In a test where a Geneve encapsulated TCP stream is sent to a hypervisor, GRO'ed, decapsulated, and bridged to a VM performance is improved by 60% (5Gbps->8Gbps) as a result of avoiding unnecessary segmentation at the VM tap interface. Reported-by: Ramu Ramamurthy <sramamur@linux.vnet.ibm.com> Fixes: 68c33163 ("v4 GRE: Add TCP segmentation offload for GRE") Signed-off-by: Jesse Gross <jesse@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-03-19 09:32:02 -07:00

ip6tnl/sit: drop packet if ECN present with not-ECT This patch reports the change made by Stephen Hemminger in ipip and gre[6] in commit eccc1bb8d4b4 (tunnel: drop packet if ECN present with not-ECT). Goal is to handle RFC6040, Section 4.2: Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. The patch takes benefits from common function added in net/inet_ecn.h. Like it was done for Xin4 tunnels, it adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Errors are also tracked via rx_frame_error. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-27 03:07:11 +00:00

ipv6: sit: reset ip header pointer in ipip6_rcv ipip6 tunnels run iptunnel_pull_header on received skbs. This can determine the following use-after-free accessing iph pointer since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device) [ 706.369655] BUG: KASAN: use-after-free in ipip6_rcv+0x1678/0x16e0 [sit] [ 706.449056] Read of size 1 at addr ffffe01b6bd855f5 by task ksoftirqd/1/= [ 706.669494] Hardware name: HPE ProLiant m400 Server/ProLiant m400 Server, BIOS U02 08/19/2016 [ 706.771839] Call trace: [ 706.801159] dump_backtrace+0x0/0x2f8 [ 706.845079] show_stack+0x24/0x30 [ 706.884833] dump_stack+0xe0/0x11c [ 706.925629] print_address_description+0x68/0x260 [ 706.982070] kasan_report+0x178/0x340 [ 707.025995] __asan_report_load1_noabort+0x30/0x40 [ 707.083481] ipip6_rcv+0x1678/0x16e0 [sit] [ 707.132623] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 707.185940] ip_local_deliver_finish+0x3b8/0x988 [ 707.241338] ip_local_deliver+0x144/0x470 [ 707.289436] ip_rcv_finish+0x43c/0x14b0 [ 707.335447] ip_rcv+0x628/0x1138 [ 707.374151] __netif_receive_skb_core+0x1670/0x2600 [ 707.432680] __netif_receive_skb+0x28/0x190 [ 707.482859] process_backlog+0x1d0/0x610 [ 707.529913] net_rx_action+0x37c/0xf68 [ 707.574882] __do_softirq+0x288/0x1018 [ 707.619852] run_ksoftirqd+0x70/0xa8 [ 707.662734] smpboot_thread_fn+0x3a4/0x9e8 [ 707.711875] kthread+0x2c8/0x350 [ 707.750583] ret_from_fork+0x10/0x18 [ 707.811302] Allocated by task 16982: [ 707.854182] kasan_kmalloc.part.1+0x40/0x108 [ 707.905405] kasan_kmalloc+0xb4/0xc8 [ 707.948291] kasan_slab_alloc+0x14/0x20 [ 707.994309] __kmalloc_node_track_caller+0x158/0x5e0 [ 708.053902] __kmalloc_reserve.isra.8+0x54/0xe0 [ 708.108280] __alloc_skb+0xd8/0x400 [ 708.150139] sk_stream_alloc_skb+0xa4/0x638 [ 708.200346] tcp_sendmsg_locked+0x818/0x2b90 [ 708.251581] tcp_sendmsg+0x40/0x60 [ 708.292376] inet_sendmsg+0xf0/0x520 [ 708.335259] sock_sendmsg+0xac/0xf8 [ 708.377096] sock_write_iter+0x1c0/0x2c0 [ 708.424154] new_sync_write+0x358/0x4a8 [ 708.470162] __vfs_write+0xc4/0xf8 [ 708.510950] vfs_write+0x12c/0x3d0 [ 708.551739] ksys_write+0xcc/0x178 [ 708.592533] __arm64_sys_write+0x70/0xa0 [ 708.639593] el0_svc_handler+0x13c/0x298 [ 708.686646] el0_svc+0x8/0xc [ 708.739019] Freed by task 17: [ 708.774597] __kasan_slab_free+0x114/0x228 [ 708.823736] kasan_slab_free+0x10/0x18 [ 708.868703] kfree+0x100/0x3d8 [ 708.905320] skb_free_head+0x7c/0x98 [ 708.948204] skb_release_data+0x320/0x490 [ 708.996301] pskb_expand_head+0x60c/0x970 [ 709.044399] __iptunnel_pull_header+0x3b8/0x5d0 [ 709.098770] ipip6_rcv+0x41c/0x16e0 [sit] [ 709.146873] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 709.200195] ip_local_deliver_finish+0x3b8/0x988 [ 709.255596] ip_local_deliver+0x144/0x470 [ 709.303692] ip_rcv_finish+0x43c/0x14b0 [ 709.349705] ip_rcv+0x628/0x1138 [ 709.388413] __netif_receive_skb_core+0x1670/0x2600 [ 709.446943] __netif_receive_skb+0x28/0x190 [ 709.497120] process_backlog+0x1d0/0x610 [ 709.544169] net_rx_action+0x37c/0xf68 [ 709.589131] __do_softirq+0x288/0x1018 [ 709.651938] The buggy address belongs to the object at ffffe01b6bd85580 which belongs to the cache kmalloc-1024 of size 1024 [ 709.804356] The buggy address is located 117 bytes inside of 1024-byte region [ffffe01b6bd85580, ffffe01b6bd85980) [ 709.946340] The buggy address belongs to the page: [ 710.003824] page:ffff7ff806daf600 count:1 mapcount:0 mapping:ffffe01c4001f600 index:0x0 [ 710.099914] flags: 0xfffff8000000100(slab) [ 710.149059] raw: 0fffff8000000100 dead000000000100 dead000000000200 ffffe01c4001f600 [ 710.242011] raw: 0000000000000000 0000000000380038 00000001ffffffff 0000000000000000 [ 710.334966] page dumped because: kasan: bad access detected Fix it resetting iph pointer after iptunnel_pull_header Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap") Tested-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-04-04 16:37:53 +02:00

sit: allow redirecting ip6ip, ipip and mplsip packets to eth devices Even though sit transports L3 data (IPv6, IPv4 or MPLS) packets, it needs to reset the mac_header pointer, so that other parts of the stack don't mistakenly access the outer header after the packet has been decapsulated. There are two rx handlers to modify: ipip6_rcv() for the ip6ip mode and sit_tunnel_rcv() which is used to re-implement the ipip and mplsip modes of ipip.ko. This allows to push an Ethernet header to sit packets and redirect them to an Ethernet device: $ tc filter add dev sit0 ingress matchall \ action vlan push_eth dst_mac 00:00:5e:00:53:01 \ src_mac 00:00:5e:00:53:00 \ action mirred egress redirect dev eth0 Without this patch, push_eth refuses to add an ethernet header because the skb appears to already have a MAC header. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-06-25 15:33:08 +02:00

ip6tnl/sit: drop packet if ECN present with not-ECT This patch reports the change made by Stephen Hemminger in ipip and gre[6] in commit eccc1bb8d4b4 (tunnel: drop packet if ECN present with not-ECT). Goal is to handle RFC6040, Section 4.2: Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. The patch takes benefits from common function added in net/inet_ecn.h. Like it was done for Xin4 tunnels, it adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Errors are also tracked via rx_frame_error. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-27 03:07:11 +00:00

ipv6/sit: use DEV_STATS_INC() to avoid data-races syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error concurrently. This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit() is not protected by a spinlock. While original KCSAN report was about tx path, rx path has the same issue. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2022-11-15 08:53:56 +00:00

ip6tnl/sit: drop packet if ECN present with not-ECT This patch reports the change made by Stephen Hemminger in ipip and gre[6] in commit eccc1bb8d4b4 (tunnel: drop packet if ECN present with not-ECT). Goal is to handle RFC6040, Section 4.2: Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. The patch takes benefits from common function added in net/inet_ecn.h. Like it was done for Xin4 tunnels, it adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Errors are also tracked via rx_frame_error. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-27 03:07:11 +00:00

[IPV6]: Add RFC4214 support This patch includes support for the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) per RFC4214. It uses the SIT module, and is configured using extensions to the "iproute2" utility. The diffs are specific to the Linux 2.6.24-rc2 kernel distribution. This version includes the diff for ./include/linux/if.h which was missing in the v2.4 submission and is needed to make the patch compile. The patch has been installed, compiled and tested in a clean 2.6.24-rc2 kernel build area. Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-11-29 22:11:40 +11:00

net: Introduce skb_tunnel_rx() helper skb rxhash should be cleared when a skb is handled by a tunnel before being delivered again, so that correct packet steering can take place. There are other cleanups and accounting that we can factorize in a new helper, skb_tunnel_rx() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-05-17 22:36:55 -07:00

sit: use dev_sw_netstats_rx_add() We have a convenient helper, let's use it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2022-06-08 08:46:34 -07:00

sit: percpu stats accounting Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-27 00:38:18 +00:00

net: add a core netdev->rx_dropped counter In various situations, a device provides a packet to our stack and we drop it before it enters protocol stack : - softnet backlog full (accounted in /proc/net/softnet_stat) - bad vlan tag (not accounted) - unknown/unregistered protocol (not accounted) We can handle a per-device counter of such dropped frames at core level, and automatically adds it to the device provided stats (rx_dropped), so that standard tools can be used (ifconfig, ip link, cat /proc/net/dev) This is a generalization of commit 8990f468a (net: rx_dropped accounting), thus reverting it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-30 21:06:55 +00:00

net: rx_dropped accounting Under load, netif_rx() can drop incoming packets but administrators dont have a chance to spot which device needs some tuning (RPS activation for example) This patch adds rx_dropped accounting in vlans and tunnels. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-20 00:12:11 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net/ipv6/sit.c: return unhandled skb to tunnel4_rcv I found a problem using an IPv6 over IPv4 tunnel. When CONFIG_IPV6_SIT was enabled, the packets would be rejected as net/ipv6/sit.c was catching all IPPROTO_IPV6 packets and returning an ICMP port unreachable error. I think this patch fixes the problem cleanly. I believe the code in net/ipv4/tunnel4.c:tunnel4_rcv takes care of it properly if none of the handlers claim the skb. Signed-off-by: David McCullough <david_mccullough@mcafee.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-11-29 19:32:34 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: Add missing kfree_skb() on pskb_may_pull() failure. Noticed by Paul Marks <paul@pmarks.net>. Signed-off-by: David S. Miller <davem@davemloft.net>

2008-05-08 23:40:26 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

ip_tunnel: push generic protocol handling to ip_tunnel module. Process skb tunnel header before sending packet to protocol handler. this allows code sharing between gre and ovs gre modules. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-17 17:50:02 -07:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

net: sit: Update lookup to handle links set to L3 slave Using SIT tunnels with VRFs works fine if the underlay device is in a VRF and the link parameter is set to the VRF device. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev myvrf Update the device check to allow the link to be the enslaved device as well. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev eth4 where eth4 is enslaved to myvrf. Reported-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-10-30 10:07:17 -07:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

ip_tunnel: push generic protocol handling to ip_tunnel module. Process skb tunnel header before sending packet to protocol handler. this allows code sharing between gre and ovs gre modules. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-17 17:50:02 -07:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

net: sit: Update lookup to handle links set to L3 slave Using SIT tunnels with VRFs works fine if the underlay device is in a VRF and the link parameter is set to the VRF device. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev myvrf Update the device check to allow the link to be the enslaved device as well. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev eth4 where eth4 is enslaved to myvrf. Reported-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-10-30 10:07:17 -07:00

ipv6: coding style: comparison for inequality with NULL The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-03-29 14:00:05 +01:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

ipv4 tunnels: fix an oops when using ipip/sit with IPsec Since commit 3d7b46cd20e3 (ip_tunnel: push generic protocol handling to ip_tunnel module.), an Oops is triggered when an xfrm policy is configured on an IPv4 over IPv4 tunnel. xfrm4_policy_check() calls __xfrm_policy_check2(), which uses skb_dst(skb). But this field is NULL because iptunnel_pull_header() calls skb_dst_drop(skb). Signed-off-by: Li Hongjun <hongjun.li@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-08-28 11:54:50 +02:00

sit: allow redirecting ip6ip, ipip and mplsip packets to eth devices Even though sit transports L3 data (IPv6, IPv4 or MPLS) packets, it needs to reset the mac_header pointer, so that other parts of the stack don't mistakenly access the outer header after the packet has been decapsulated. There are two rx handlers to modify: ipip6_rcv() for the ip6ip mode and sit_tunnel_rcv() which is used to re-implement the ipip and mplsip modes of ipip.ko. This allows to push an Ethernet header to sit packets and redirect them to an Ethernet device: $ tc filter add dev sit0 ingress matchall \ action vlan push_eth dst_mac 00:00:5e:00:53:01 \ src_mac 00:00:5e:00:53:00 \ action mirred egress redirect dev eth0 Without this patch, push_eth refuses to add an ethernet header because the skb appears to already have a MAC header. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-06-25 15:33:08 +02:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-22 23:43:14 +00:00

ipv6: add anti-spoofing checks for 6to4 and 6rd This patch adds anti-spoofing checks in sit.c as specified in RFC3964 section 5.2 for 6to4 and RFC5969 section 12 for 6rd. I left out the checks which could easily be implemented with netfilter. Specifically this patch adds following logic (based loosely on the pseudocode in RFC3964 section 5.2): if prefix (inner_src_v6) == rd6_prefix (2002::/16 is the default) and outer_src_v4 != embedded_ipv4 (inner_src_v6) drop if prefix (inner_dst_v6) == rd6_prefix (or 2002::/16 is the default) and outer_dst_v4 != embedded_ipv4 (inner_dst_v6) drop accept To accomplish the specified security checks proposed by above RFCs, it is still necessary to employ uRPF filters with netfilter. These new checks only kick in if the employed addresses are within the 2002::/16 or another range specified by the 6rd-prefix (which defaults to 2002::/16). Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-01-29 08:24:25 +00:00

ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-22 23:43:14 +00:00

ipv6: add anti-spoofing checks for 6to4 and 6rd This patch adds anti-spoofing checks in sit.c as specified in RFC3964 section 5.2 for 6to4 and RFC5969 section 12 for 6rd. I left out the checks which could easily be implemented with netfilter. Specifically this patch adds following logic (based loosely on the pseudocode in RFC3964 section 5.2): if prefix (inner_src_v6) == rd6_prefix (2002::/16 is the default) and outer_src_v4 != embedded_ipv4 (inner_src_v6) drop if prefix (inner_dst_v6) == rd6_prefix (or 2002::/16 is the default) and outer_dst_v4 != embedded_ipv4 (inner_dst_v6) drop accept To accomplish the specified security checks proposed by above RFCs, it is still necessary to employ uRPF filters with netfilter. These new checks only kick in if the employed addresses are within the 2002::/16 or another range specified by the 6rd-prefix (which defaults to 2002::/16). Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-01-29 08:24:25 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-22 23:43:14 +00:00

sit: get rid of ipip6_lock As RTNL is held while doing tunnels inserts and deletes, we can remove ipip6_lock spinlock. My initial RCU conversion was conservative and converted the rwlock to spinlock, with no RTNL requirement. Use appropriate rcu annotations and modern lockdep checks as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-15 11:35:10 +00:00

ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-22 23:43:14 +00:00

net: sit: fix UBSAN Undefined behaviour in check_6rd In func check_6rd,tunnel->ip6rd.relay_prefixlen may equal to 32,so UBSAN complain about it. UBSAN: Undefined behaviour in net/ipv6/sit.c:781:47 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 6 PID: 20036 Comm: syz-executor.0 Not tainted 4.19.27 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 ubsan_epilogue+0xe/0x81 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x293/0x2e8 lib/ubsan.c:425 check_6rd.constprop.9+0x433/0x4e0 net/ipv6/sit.c:781 try_6rd net/ipv6/sit.c:806 [inline] ipip6_tunnel_xmit net/ipv6/sit.c:866 [inline] sit_tunnel_xmit+0x141c/0x2720 net/ipv6/sit.c:1033 __netdev_start_xmit include/linux/netdevice.h:4300 [inline] netdev_start_xmit include/linux/netdevice.h:4309 [inline] xmit_one net/core/dev.c:3243 [inline] dev_hard_start_xmit+0x17c/0x780 net/core/dev.c:3259 __dev_queue_xmit+0x1656/0x2500 net/core/dev.c:3829 neigh_output include/net/neighbour.h:501 [inline] ip6_finish_output2+0xa36/0x2290 net/ipv6/ip6_output.c:120 ip6_finish_output+0x3e7/0xa20 net/ipv6/ip6_output.c:154 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip6_output+0x1e2/0x720 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] ip6_local_out+0x99/0x170 net/ipv6/output_core.c:176 ip6_send_skb+0x9d/0x2f0 net/ipv6/ip6_output.c:1697 ip6_push_pending_frames+0xc0/0x100 net/ipv6/ip6_output.c:1717 rawv6_push_pending_frames net/ipv6/raw.c:616 [inline] rawv6_sendmsg+0x2435/0x3530 net/ipv6/raw.c:946 inet_sendmsg+0xf8/0x5c0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xc8/0x110 net/socket.c:631 ___sys_sendmsg+0x6cf/0x890 net/socket.c:2114 __sys_sendmsg+0xf0/0x1b0 net/socket.c:2152 do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: linmiaohe <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-03-11 16:29:32 +08:00

ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-22 23:43:14 +00:00

ipv6 sit: Fix 6rd relay address. ipv6 sit: Fix 6rd relay address. Relay's address should be extracted from real IPv6 address instead of configured prefix. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-11 03:44:45 +00:00

ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-22 23:43:14 +00:00

ipv6: add anti-spoofing checks for 6to4 and 6rd This patch adds anti-spoofing checks in sit.c as specified in RFC3964 section 5.2 for 6to4 and RFC5969 section 12 for 6rd. I left out the checks which could easily be implemented with netfilter. Specifically this patch adds following logic (based loosely on the pseudocode in RFC3964 section 5.2): if prefix (inner_src_v6) == rd6_prefix (2002::/16 is the default) and outer_src_v4 != embedded_ipv4 (inner_src_v6) drop if prefix (inner_dst_v6) == rd6_prefix (or 2002::/16 is the default) and outer_dst_v4 != embedded_ipv4 (inner_dst_v6) drop accept To accomplish the specified security checks proposed by above RFCs, it is still necessary to employ uRPF filters with netfilter. These new checks only kick in if the employed addresses are within the 2002::/16 or another range specified by the 6rd-prefix (which defaults to 2002::/16). Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-01-29 08:24:25 +00:00

ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-22 23:43:14 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-02-09 23:24:49 +09:00

ipv6: add anti-spoofing checks for 6to4 and 6rd This patch adds anti-spoofing checks in sit.c as specified in RFC3964 section 5.2 for 6to4 and RFC5969 section 12 for 6rd. I left out the checks which could easily be implemented with netfilter. Specifically this patch adds following logic (based loosely on the pseudocode in RFC3964 section 5.2): if prefix (inner_src_v6) == rd6_prefix (2002::/16 is the default) and outer_src_v4 != embedded_ipv4 (inner_src_v6) drop if prefix (inner_dst_v6) == rd6_prefix (or 2002::/16 is the default) and outer_dst_v4 != embedded_ipv4 (inner_dst_v6) drop accept To accomplish the specified security checks proposed by above RFCs, it is still necessary to employ uRPF filters with netfilter. These new checks only kick in if the employed addresses are within the 2002::/16 or another range specified by the 6rd-prefix (which defaults to 2002::/16). Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-01-29 08:24:25 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-22 23:43:14 +00:00

ipv6: add anti-spoofing checks for 6to4 and 6rd This patch adds anti-spoofing checks in sit.c as specified in RFC3964 section 5.2 for 6to4 and RFC5969 section 12 for 6rd. I left out the checks which could easily be implemented with netfilter. Specifically this patch adds following logic (based loosely on the pseudocode in RFC3964 section 5.2): if prefix (inner_src_v6) == rd6_prefix (2002::/16 is the default) and outer_src_v4 != embedded_ipv4 (inner_src_v6) drop if prefix (inner_dst_v6) == rd6_prefix (or 2002::/16 is the default) and outer_dst_v4 != embedded_ipv4 (inner_dst_v6) drop accept To accomplish the specified security checks proposed by above RFCs, it is still necessary to employ uRPF filters with netfilter. These new checks only kick in if the employed addresses are within the 2002::/16 or another range specified by the 6rd-prefix (which defaults to 2002::/16). Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-01-29 08:24:25 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6: sit: Add ipip6_tunnel_dst_find() for cleanup Extract the dst lookup logic from ipip6_tunnel_xmit() into new helper ipip6_tunnel_dst_find() to reduce code duplication and enhance readability. No functional change intended. On a x86_64, with allmodconfig object size is also reduced: ./scripts/bloat-o-meter net/ipv6/sit.o net/ipv6/sit-new.o add/remove: 5/3 grow/shrink: 3/4 up/down: 1841/-2275 (-434) Function old new delta ipip6_tunnel_dst_find - 1697 +1697 __pfx_ipip6_tunnel_dst_find - 64 +64 __UNIQUE_ID_modinfo2094 - 43 +43 ipip6_tunnel_xmit.isra.cold 79 88 +9 __UNIQUE_ID_modinfo2096 12 20 +8 __UNIQUE_ID___addressable_init_module2092 - 8 +8 __UNIQUE_ID___addressable_cleanup_module2093 - 8 +8 __func__ 55 59 +4 __UNIQUE_ID_modinfo2097 20 18 -2 __UNIQUE_ID___addressable_init_module2093 8 - -8 __UNIQUE_ID___addressable_cleanup_module2094 8 - -8 __UNIQUE_ID_modinfo2098 18 - -18 __UNIQUE_ID_modinfo2095 43 12 -31 descriptor 112 56 -56 ipip6_tunnel_xmit.isra 9910 7758 -2152 Total: Before=72537, After=72103, chg -0.60% Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20250901114857.1968513-1-yuehaibing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

2025-09-01 19:48:57 +08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

netdev: convert pseudo-devices to netdev_tx_t Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-08-31 19:50:41 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[NET]: Convert net/{ipv4,ipv6,sched} to netdev_priv Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>

2006-01-08 22:05:26 -08:00

inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-04-22 04:53:02 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: Clean up DF code by copying from IPIP This patch rearranges the SIT DF bit handling using the new IPIP DF code. The only externally visible effect should be the case where PMTU is enabled and the MTU is exactly 1280 bytes. In this case the previous code would send packets out with DF off while the new code would set the DF bit. This is inline with RFC 4213. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Thanks, Signed-off-by: David S. Miller <davem@davemloft.net>

2009-11-09 08:42:01 +00:00

ipv6: White-space cleansing : Line Layouts This patch makes no changes to the logic of the code but simply addresses coding style issues as detected by checkpatch. Both objdump and diff -w show no differences. A number of items are addressed in this patch: * Multiple spaces converted to tabs * Spaces before tabs removed. * Spaces in pointer typing cleansed (char *)foo etc. * Remove space after sizeof * Ensure spacing around comparators such as if statements. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-08-24 21:53:10 +01:00

[IPV6]: Misc endianness annotations. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>

2006-11-14 20:56:00 -08:00

ipv4: Make caller provide on-stack flow key to ip_route_output_ports(). Signed-off-by: David S. Miller <davem@davemloft.net>

2011-05-03 20:25:42 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ip_tunnels: extend iptunnel_xmit() Refactor various ip tunnels xmit functions and extend iptunnel_xmit() so that there is more code sharing. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-17 17:49:56 -07:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit tunnels: propagate IPv6 transport class to IPv4 Type of Service sit tunnels (IPv6 tunnel over IPv4) do not implement the "tos inherit" case to copy the IPv6 transport class byte from the inner packet to the IPv4 type of service byte in the outer packet. By contrast, ipip tunnels and GRE tunnels do. This patch, adapted from the similar code in net/ipv4/ipip.c and net/ipv4/ip_gre.c, implements that. This patch applies to 3.0.1, and has been tested on that version. Signed-off-by: Lionel Elie Mamane <lionel@mamane.lu> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-08-13 14:04:38 +00:00

[IPV6]: Add RFC4214 support This patch includes support for the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) per RFC4214. It uses the SIT module, and is configured using extensions to the "iproute2" utility. The diffs are specific to the Linux 2.6.24-rc2 kernel distribution. This version includes the diff for ./include/linux/if.h which was missing in the v2.4 submission and is needed to make the patch compile. The patch has been installed, compiled and tested in a clean 2.6.24-rc2 kernel build area. Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-11-29 22:11:40 +11:00

ipv6: sit: Add ipip6_tunnel_dst_find() for cleanup Extract the dst lookup logic from ipip6_tunnel_xmit() into new helper ipip6_tunnel_dst_find() to reduce code duplication and enhance readability. No functional change intended. On a x86_64, with allmodconfig object size is also reduced: ./scripts/bloat-o-meter net/ipv6/sit.o net/ipv6/sit-new.o add/remove: 5/3 grow/shrink: 3/4 up/down: 1841/-2275 (-434) Function old new delta ipip6_tunnel_dst_find - 1697 +1697 __pfx_ipip6_tunnel_dst_find - 64 +64 __UNIQUE_ID_modinfo2094 - 43 +43 ipip6_tunnel_xmit.isra.cold 79 88 +9 __UNIQUE_ID_modinfo2096 12 20 +8 __UNIQUE_ID___addressable_init_module2092 - 8 +8 __UNIQUE_ID___addressable_cleanup_module2093 - 8 +8 __func__ 55 59 +4 __UNIQUE_ID_modinfo2097 20 18 -2 __UNIQUE_ID___addressable_init_module2093 8 - -8 __UNIQUE_ID___addressable_cleanup_module2094 8 - -8 __UNIQUE_ID_modinfo2098 18 - -18 __UNIQUE_ID_modinfo2095 43 12 -31 descriptor 112 56 -56 ipip6_tunnel_xmit.isra 9910 7758 -2152 Total: Before=72537, After=72103, chg -0.60% Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20250901114857.1968513-1-yuehaibing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

2025-09-01 19:48:57 +08:00

[IPV6]: Add RFC4214 support This patch includes support for the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) per RFC4214. It uses the SIT module, and is configured using extensions to the "iproute2" utility. The diffs are specific to the Linux 2.6.24-rc2 kernel distribution. This version includes the diff for ./include/linux/if.h which was missing in the v2.4 submission and is needed to make the patch compile. The patch has been installed, compiled and tested in a clean 2.6.24-rc2 kernel build area. Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-11-29 22:11:40 +11:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6: add anti-spoofing checks for 6to4 and 6rd This patch adds anti-spoofing checks in sit.c as specified in RFC3964 section 5.2 for 6to4 and RFC5969 section 12 for 6rd. I left out the checks which could easily be implemented with netfilter. Specifically this patch adds following logic (based loosely on the pseudocode in RFC3964 section 5.2): if prefix (inner_src_v6) == rd6_prefix (2002::/16 is the default) and outer_src_v4 != embedded_ipv4 (inner_src_v6) drop if prefix (inner_dst_v6) == rd6_prefix (or 2002::/16 is the default) and outer_dst_v4 != embedded_ipv4 (inner_dst_v6) drop accept To accomplish the specified security checks proposed by above RFCs, it is still necessary to employ uRPF filters with netfilter. These new checks only kick in if the employed addresses are within the 2002::/16 or another range specified by the 6rd-prefix (which defaults to 2002::/16). Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-01-29 08:24:25 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6: sit: Add ipip6_tunnel_dst_find() for cleanup Extract the dst lookup logic from ipip6_tunnel_xmit() into new helper ipip6_tunnel_dst_find() to reduce code duplication and enhance readability. No functional change intended. On a x86_64, with allmodconfig object size is also reduced: ./scripts/bloat-o-meter net/ipv6/sit.o net/ipv6/sit-new.o add/remove: 5/3 grow/shrink: 3/4 up/down: 1841/-2275 (-434) Function old new delta ipip6_tunnel_dst_find - 1697 +1697 __pfx_ipip6_tunnel_dst_find - 64 +64 __UNIQUE_ID_modinfo2094 - 43 +43 ipip6_tunnel_xmit.isra.cold 79 88 +9 __UNIQUE_ID_modinfo2096 12 20 +8 __UNIQUE_ID___addressable_init_module2092 - 8 +8 __UNIQUE_ID___addressable_cleanup_module2093 - 8 +8 __func__ 55 59 +4 __UNIQUE_ID_modinfo2097 20 18 -2 __UNIQUE_ID___addressable_init_module2093 8 - -8 __UNIQUE_ID___addressable_cleanup_module2094 8 - -8 __UNIQUE_ID_modinfo2098 18 - -18 __UNIQUE_ID_modinfo2095 43 12 -31 descriptor 112 56 -56 ipip6_tunnel_xmit.isra 9910 7758 -2152 Total: Before=72537, After=72103, chg -0.60% Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20250901114857.1968513-1-yuehaibing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

2025-09-01 19:48:57 +08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

ipv6: sit: Unmask upper DSCP bits in ipip6_tunnel_xmit() The function calls flowi4_init_output() to initialize an IPv4 flow key with which it then performs a FIB lookup using ip_route_output_flow(). The 'tos' variable with which the TOS value in the IPv4 flow key (flowi4_tos) is initialized contains the full DS field. Unmask the upper DSCP bits so that in the future the FIB lookup could be performed according to the full DSCP value. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-08-29 09:54:56 +03:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

sit: use dst_cache in ipip6_tunnel_xmit Same as other ip tunnel, use dst_cache in xmit action to avoid unnecessary fib lookups. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-07-14 21:31:22 +08:00

ipv6/sit: use DEV_STATS_INC() to avoid data-races syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error concurrently. This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit() is not protected by a spinlock. While original KCSAN report was about tx path, rx path has the same issue. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2022-11-15 08:53:56 +00:00

sit: use dst_cache in ipip6_tunnel_xmit Same as other ip tunnel, use dst_cache in xmit action to avoid unnecessary fib lookups. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-07-14 21:31:22 +08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: use dst_cache in ipip6_tunnel_xmit Same as other ip tunnel, use dst_cache in xmit action to avoid unnecessary fib lookups. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-07-14 21:31:22 +08:00

sit: allow encapsulated IPv6 traffic to be delivered locally While experimenting with FOU encapsulation Amir noticed that encapsulated IPv6 traffic fails to be delivered, if the peer IP address is configured locally. It can be easily verified by creating a sit interface like below: $ sudo ip link add name fou_test type sit remote 127.0.0.1 encap fou encap-sport auto encap-dport 1111 $ sudo ip link set fou_test up and sending some IPv4 and IPv6 traffic to it $ ping -I fou_test -c 1 1.1.1.1 $ ping6 -I fou_test -c 1 fe80::d0b0:dfff:fe4c:fcbc "tcpdump -i any udp dst port 1111" will confirm that only the first IPv4 ping was encapsulated and attempted to be delivered. This seems like a limitation: for example, in a cloud environment the "peer" service may be arbitrarily scheduled on any server within the cluster, where all nodes are trying to send encapsulated traffic. And the unlucky node will not be able to. Moreover, delivering encapsulated IPv4 traffic locally is allowed. But I may not have all the context about this restriction and this code predates the observable git history. Reported-by: Amir Razmjou <arazmjou@cloudflare.com> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220107123842.211335-1-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2022-01-07 12:38:42 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6/sit: use DEV_STATS_INC() to avoid data-races syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error concurrently. This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit() is not protected by a spinlock. While original KCSAN report was about tx path, rx path has the same issue. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2022-11-15 08:53:56 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net-next: remove useless union keyword remove useless union keyword in rtable, rt6_info and dn_route. Since there is only one member in a union, the union keyword isn't useful. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-06-10 23:31:35 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6/sit: use DEV_STATS_INC() to avoid data-races syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error concurrently. This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit() is not protected by a spinlock. While original KCSAN report was about tx path, rx path has the same issue. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2022-11-15 08:53:56 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: define gso types for IPx over IPv4 and IPv6 This patch defines two new GSO definitions SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 along with corresponding NETIF_F_GSO_IPXIP4 and NETIF_F_GSO_IPXIP6. These are used to described IP in IP tunnel and what the outer protocol is. The inner protocol can be deduced from other GSO types (e.g. SKB_GSO_TCPV4 and SKB_GSO_TCPV6). The GSO types of SKB_GSO_IPIP and SKB_GSO_SIT are removed (these are both instances of SKB_GSO_IPXIP4). SKB_GSO_IPXIP6 will be used when support for GSO with IP encapsulation over IPv6 is added. Signed-off-by: Tom Herbert <tom@herbertland.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-05-18 09:06:10 -07:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

ip_tunnel_core: iptunnel_handle_offloads returns int and doesn't free skb This patch updates the IP tunnel core function iptunnel_handle_offloads so that we return an int and do not free the skb inside the function. This actually allows us to clean up several paths in several tunnels so that we can free the skb at one point in the path without having to have a secondary path if we are supporting tunnel offloads. In addition it should resolve some double-free issues I have found in the tunnels paths as I believe it is possible for us to end up triggering such an event in the case of fou or gue. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-04-14 15:33:37 -04:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

sit: Clean up DF code by copying from IPIP This patch rearranges the SIT DF bit handling using the new IPIP DF code. The only externally visible effect should be the case where PMTU is enabled and the MTU is exactly 1280 bytes. In this case the previous code would send packets out with DF off while the new code would set the DF bit. This is inline with RFC 4213. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Thanks, Signed-off-by: David S. Miller <davem@davemloft.net>

2009-11-09 08:42:01 +00:00

ipv4: use dst4_mtu() instead of dst_mtu() When we expect an IPv4 dst, use dst4_mtu() instead of dst_mtu() to save some code space. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260130210303.3888261-8-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2026-01-30 21:03:02 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: replace 68 with micro IPV4_MIN_MTU Use meaningfull micro IPV4_MIN_MTU Signed-off-by: zhang kai <zhangkaiheb@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-06-02 09:50:39 +08:00

ipv6/sit: use DEV_STATS_INC() to avoid data-races syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error concurrently. This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit() is not protected by a spinlock. While original KCSAN report was about tx path, rx path has the same issue. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2022-11-15 08:53:56 +00:00

sit: Clean up DF code by copying from IPIP This patch rearranges the SIT DF bit handling using the new IPIP DF code. The only externally visible effect should be the case where PMTU is enabled and the MTU is exactly 1280 bytes. In this case the previous code would send packets out with DF off while the new code would set the DF bit. This is inline with RFC 4213. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Thanks, Signed-off-by: David S. Miller <davem@davemloft.net>

2009-11-09 08:42:01 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: Clean up DF code by copying from IPIP This patch rearranges the SIT DF bit handling using the new IPIP DF code. The only externally visible effect should be the case where PMTU is enabled and the MTU is exactly 1280 bytes. In this case the previous code would send packets out with DF off while the new code would set the DF bit. This is inline with RFC 4213. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Thanks, Signed-off-by: David S. Miller <davem@davemloft.net>

2009-11-09 08:42:01 +00:00

net: don't call update_pmtu unconditionally Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to: "BUG: unable to handle kernel NULL pointer dereference at (null)" Let's add a helper to check if update_pmtu is available before calling it. Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path") Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path") CC: Roman Kapl <code@rkapl.cz> CC: Xin Long <lucien.xin@gmail.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-01-25 19:03:03 +01:00

sit: do not confirm neighbor when do pmtu update When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-12-22 10:51:15 +08:00

sit: Clean up DF code by copying from IPIP This patch rearranges the SIT DF bit handling using the new IPIP DF code. The only externally visible effect should be the case where PMTU is enabled and the MTU is exactly 1280 bytes. In this case the previous code would send packets out with DF off while the new code would set the DF bit. This is inline with RFC 4213. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Thanks, Signed-off-by: David S. Miller <davem@davemloft.net>

2009-11-09 08:42:01 +00:00

ipv6: sit: update mtu check to take care of gso packets While testing my changes for TSO support in SIT devices, I was using sit0 tunnel which appears to include nopmtudisc flag. But using : ip tun add sittun mode sit remote $REMOTE_IPV4 local $LOCAL_IPV4 \ dev $IFACE We get a tunnel which rejects too long packets because of the mtu check which is not yet GSO aware. erd:~# ip tunnel sittun: ipv6/ip remote 10.246.17.84 local 10.246.17.83 ttl inherit 6rd-prefix 2002::/16 sit0: ipv6/ip remote any local any ttl 64 nopmtudisc 6rd-prefix 2002::/16 This patch is based on an excellent report from Michal Shmidt. In the future, we probably want to extend the MTU check to do the right thing for GSO packets... Fixes: ("61c1db7fae21 ipv6: sit: add GSO/TSO support") Reported-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-12-16 06:31:23 -08:00

net: always use icmp{,v6}_ndo_send from ndo_start_xmit There were a few remaining tunnel drivers that didn't receive the prior conversion to icmp{,v6}_ndo_send. Knowing now that this could lead to memory corrution (see ee576c47db60 ("net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending") for details), there's even more imperative to have these all converted. So this commit goes through the remaining cases that I could find and does a boring translation to the ndo variety. The Fixes: line below is the merge that originally added icmp{,v6}_ ndo_send and converted the first batch of icmp{,v6}_send users. The rationale then for the change applies equally to this patch. It's just that these drivers were left out of the initial conversion because these network devices are hiding in net/ rather than in drivers/net/. Cc: Florian Westphal <fw@strlen.de> Cc: Willem de Bruijn <willemb@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Fixes: 803381f9f117 ("Merge branch 'icmp-account-for-NAT-when-sending-icmps-from-ndo-layer'") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-02-27 01:40:19 +01:00

sit: Clean up DF code by copying from IPIP This patch rearranges the SIT DF bit handling using the new IPIP DF code. The only externally visible effect should be the case where PMTU is enabled and the MTU is exactly 1280 bytes. In this case the previous code would send packets out with DF off while the new code would set the DF bit. This is inline with RFC 4213. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Thanks, Signed-off-by: David S. Miller <davem@davemloft.net>

2009-11-09 08:42:01 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: used time_before for comparing jiffies The functions time_before is more robust for comparing jiffies against other values. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-02-24 23:37:19 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[NET]: Avoid copying writable clones in tunnel drivers Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-07-09 15:33:40 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6/sit: use DEV_STATS_INC() to avoid data-races syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error concurrently. This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit() is not protected by a spinlock. While original KCSAN report was about tx path, rx path has the same issue. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2022-11-15 08:53:56 +00:00

sit: use kfree_skb to replace dev_kfree_skb In failure case, we should use kfree_skb not dev_kfree_skb to free skbuff, dev_kfree_skb is defined as consume_skb. Trace takes advantage of this point. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-11-25 17:21:24 +08:00

net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functions This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-06-23 06:03:08 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[SK_BUFF]: Introduce ipv6_hdr(), remove skb->nh.ipv6h Now the skb->nh union has just one member, .raw, i.e. it is just like the skb->mac union, strange, no? I'm just leaving it like that till the transport layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or ->mac_header_offset?), ditto for ->{h,nh}. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-04-25 17:54:47 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ip_tunnels: extend iptunnel_xmit() Refactor various ip tunnels xmit functions and extend iptunnel_xmit() so that there is more code sharing. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-17 17:49:56 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices Today ipip devices in collect-metadata mode don't allow for sending FOU or GUE encapsulated packets. This patch lifts the restriction by adding a struct ip_tunnel_encap to the tunnel metadata. On the egress path, the members of this struct can be set by the bpf_skb_set_fou_encap kfunc via a BPF tc-hook. Instead of dropping packets wishing to use additional UDP encapsulation, ip_md_tunnel_xmit now evaluates the contents of this struct and adds the corresponding FOU or GUE header. Furthermore, it is making sure that additional header bytes are taken into account for PMTU discovery. On the ingress path, an ipip device in collect-metadata mode will fill this struct and a BPF tc-hook can obtain the information via a call to the bpf_skb_get_fou_encap kfunc. The minor change to ip_tunnel_encap, which now takes a pointer to struct ip_tunnel_encap instead of struct ip_tunnel, allows us to control FOU encap type and parameters on a per packet-level. Signed-off-by: Christian Ehrig <cehrig@cloudflare.com> Link: https://lore.kernel.org/r/cfea47de655d0f870248abf725932f851b53960a.1680874078.git.cehrig@cloudflare.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

2023-04-07 15:38:53 +02:00

ipv6: release dst properly in ipip6_tunnel_xmit if a dst is not attached to anywhere, it should be released before exit ipip6_tunnel_xmit, otherwise cause dst memory leakage. Fixes: 61c1db7fae21 ("ipv6: sit: add GSO/TSO support") Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-12-20 17:20:12 +08:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

ipv6: release dst properly in ipip6_tunnel_xmit if a dst is not attached to anywhere, it should be released before exit ipip6_tunnel_xmit, otherwise cause dst memory leakage. Fixes: 61c1db7fae21 ("ipv6: sit: add GSO/TSO support") Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-12-20 17:20:12 +08:00

ipv6: wire up skb->encapsulation When pushing a new header before current one call skb_reset_inner_headers to record the position of the inner headers in the various ipv6 tunnel protocols. We later need this to correctly identify the addresses needed to send back an error in the xfrm layer. This change is safe, because skb->protocol is always checked before dereferencing data from the inner protocol. Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

2013-08-18 13:46:52 +02:00

sit: Set inner IP protocol in sit Call skb_set_inner_ipproto to set inner IP protocol to IPPROTO_IPV6 before tunnel_xmit. This is needed if UDP encapsulation (fou) is being done. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-29 20:22:30 -07:00

ip_tunnel: Move stats update to iptunnel_xmit() By moving stats update into iptunnel_xmit(), we can simplify iptunnel_xmit() usage. With this change there is no need to call another function (iptunnel_xmit_stats()) to update stats in tunnel xmit code path. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-12-24 14:34:54 -08:00

net: ipv4: Add a flags argument to iptunnel_xmit(), udp_tunnel_xmit_skb() iptunnel_xmit() erases the contents of the SKB control block. In order to be able to set particular IPCB flags on the SKB, add a corresponding parameter, and propagate it to udp_tunnel_xmit_skb() as well. In one of the following patches, VXLAN driver will use this facility to mark packets as subject to IP multicast routing. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Antonio Quartulli <antonio@openvpn.net> Link: https://patch.msgid.link/89c9daf9f2dc088b6b92ccebcc929f51742de91f.1750113335.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-06-17 00:44:09 +02:00

net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functions This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-06-23 06:03:08 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: use kfree_skb to replace dev_kfree_skb In failure case, we should use kfree_skb not dev_kfree_skb to free skbuff, dev_kfree_skb is defined as consume_skb. Trace takes advantage of this point. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-11-25 17:21:24 +08:00

ipv6/sit: use DEV_STATS_INC() to avoid data-races syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error concurrently. This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit() is not protected by a spinlock. While original KCSAN report was about tx path, rx path has the same issue. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2022-11-15 08:53:56 +00:00

net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functions This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-06-23 06:03:08 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

net: define gso types for IPx over IPv4 and IPv6 This patch defines two new GSO definitions SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 along with corresponding NETIF_F_GSO_IPXIP4 and NETIF_F_GSO_IPXIP6. These are used to described IP in IP tunnel and what the outer protocol is. The inner protocol can be deduced from other GSO types (e.g. SKB_GSO_TCPV4 and SKB_GSO_TCPV6). The GSO types of SKB_GSO_IPIP and SKB_GSO_SIT are removed (these are both instances of SKB_GSO_IPXIP4). SKB_GSO_IPXIP6 will be used when support for GSO with IP encapsulation over IPv6 is added. Signed-off-by: Tom Herbert <tom@herbertland.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-05-18 09:06:10 -07:00

ip_tunnel_core: iptunnel_handle_offloads returns int and doesn't free skb This patch updates the IP tunnel core function iptunnel_handle_offloads so that we return an int and do not free the skb inside the function. This actually allows us to clean up several paths in several tunnels so that we can free the skb at one point in the path without having to have a secondary path if we are supporting tunnel offloads. In addition it should resolve some double-free issues I have found in the tunnels paths as I believe it is possible for us to end up triggering such an event in the case of fou or gue. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-04-14 15:33:37 -04:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

sit: Set inner IP protocol in sit Call skb_set_inner_ipproto to set inner IP protocol to IPPROTO_IPV6 before tunnel_xmit. This is needed if UDP encapsulation (fou) is being done. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-29 20:22:30 -07:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

ip_tunnel_core: iptunnel_handle_offloads returns int and doesn't free skb This patch updates the IP tunnel core function iptunnel_handle_offloads so that we return an int and do not free the skb inside the function. This actually allows us to clean up several paths in several tunnels so that we can free the skb at one point in the path without having to have a secondary path if we are supporting tunnel offloads. In addition it should resolve some double-free issues I have found in the tunnels paths as I believe it is possible for us to end up triggering such an event in the case of fou or gue. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-04-14 15:33:37 -04:00

ipv6/sit: use DEV_STATS_INC() to avoid data-races syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error concurrently. This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit() is not protected by a spinlock. While original KCSAN report was about tx path, rx path has the same issue. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2022-11-15 08:53:56 +00:00

ipv6: sit: add GSO/TSO support Now ipv6_gso_segment() is stackable, its relatively easy to implement GSO/TSO support for SIT tunnels Performance results, when segmentation is done after tunnel device (as no NIC is yet enabled for TSO SIT support) : Before patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 3168.31 4.81 4.64 2.988 2.877 After patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 5525.00 7.76 5.17 2.763 1.840 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-10-20 20:47:30 -07:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

ip: validate header length on virtual device xmit KMSAN detected read beyond end of buffer in vti and sit devices when passing truncated packets with PF_PACKET. The issue affects additional ip tunnel devices. Extend commit 76c0ddd8c3a6 ("ip6_tunnel: be careful when accessing the inner header") and commit ccfec9e5cb2d ("ip_tunnel: be careful when accessing the inner header"). Move the check to a separate helper and call at the start of each ndo_start_xmit function in net/ipv4 and net/ipv6. Minor changes: - convert dev_kfree_skb to kfree_skb on error path, as dev_kfree_skb calls consume_skb which is not for error paths. - use pskb_network_may_pull even though that is pedantic here, as the same as pskb_may_pull for devices without llheaders. - do not cache ipv6 hdrs if used only once (unsafe across pskb_may_pull, was more relevant to earlier patch) Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-12-30 17:24:36 -05:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

ipv6/sit: use DEV_STATS_INC() to avoid data-races syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error concurrently. This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit() is not protected by a spinlock. While original KCSAN report was about tx path, rx path has the same issue. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2022-11-15 08:53:56 +00:00

sit: use kfree_skb to replace dev_kfree_skb In failure case, we should use kfree_skb not dev_kfree_skb to free skbuff, dev_kfree_skb is defined as consume_skb. Trace takes advantage of this point. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-11-25 17:21:24 +08:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

[IPV6] sit: Rebinding of SIT tunnels to other interfaces This is similar to the change already done for IPIP tunnels. Once created, a SIT tunnel can't be bound to another device. To reproduce: # create a tunnel: ip tunnel add tunneltest0 mode sit remote 10.0.0.1 dev eth0 # try to change the bounding device from eth0 to eth1: ip tunnel change tunneltest0 dev eth1 # show the result: ip tunnel show tunneltest0 tunneltest0: ipv6/ip remote 10.0.0.1 local any dev eth0 ttl inherit Notice the bound device has not changed from eth0 to eth1. This patch fixes it. When changing the binding, it also recalculates the MTU according to the new bound device's MTU. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-12-13 09:47:00 -08:00

sit: update dev->needed_headroom in ipip6_tunnel_bind_dev() When a tunnel device is bound with the underlying device, its dev->needed_headroom needs to be updated properly. IPv4 tunnels already do the same in ip_tunnel_bind_dev(). Otherwise we may not have enough header room for skb, especially after commit b17f709a2401 ("gue: TX support for using remote checksum offload option"). Fixes: 32b8a8e59c9c ("sit: add IPv4 over IPv4 support") Reported-by: Palash Oswal <oswalpalash@gmail.com> Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/ Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2023-04-26 23:00:06 -07:00

[IPV6] sit: Rebinding of SIT tunnels to other interfaces This is similar to the change already done for IPIP tunnels. Once created, a SIT tunnel can't be bound to another device. To reproduce: # create a tunnel: ip tunnel add tunneltest0 mode sit remote 10.0.0.1 dev eth0 # try to change the bounding device from eth0 to eth1: ip tunnel change tunneltest0 dev eth1 # show the result: ip tunnel show tunneltest0 tunneltest0: ipv6/ip remote 10.0.0.1 local any dev eth0 ttl inherit Notice the bound device has not changed from eth0 to eth1. This patch fixes it. When changing the binding, it also recalculates the MTU according to the new bound device's MTU. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-12-13 09:47:00 -08:00

sit: update dev->needed_headroom in ipip6_tunnel_bind_dev() When a tunnel device is bound with the underlying device, its dev->needed_headroom needs to be updated properly. IPv4 tunnels already do the same in ip_tunnel_bind_dev(). Otherwise we may not have enough header room for skb, especially after commit b17f709a2401 ("gue: TX support for using remote checksum offload option"). Fixes: 32b8a8e59c9c ("sit: add IPv4 over IPv4 support") Reported-by: Palash Oswal <oswalpalash@gmail.com> Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/ Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2023-04-26 23:00:06 -07:00

inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-04-22 04:53:02 +00:00

ipv4: Make caller provide on-stack flow key to ip_route_output_ports(). Signed-off-by: David S. Miller <davem@davemloft.net>

2011-05-03 20:25:42 -07:00

[IPV6] sit: Rebinding of SIT tunnels to other interfaces This is similar to the change already done for IPIP tunnels. Once created, a SIT tunnel can't be bound to another device. To reproduce: # create a tunnel: ip tunnel add tunneltest0 mode sit remote 10.0.0.1 dev eth0 # try to change the bounding device from eth0 to eth1: ip tunnel change tunneltest0 dev eth1 # show the result: ip tunnel show tunneltest0 tunneltest0: ipv6/ip remote 10.0.0.1 local any dev eth0 ttl inherit Notice the bound device has not changed from eth0 to eth1. This patch fixes it. When changing the binding, it also recalculates the MTU according to the new bound device's MTU. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-12-13 09:47:00 -08:00

sit: add support of x-netns This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-26 16:11:28 +02:00

ipv4: Create and use route lookup helpers. The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>

2011-03-12 00:00:52 -05:00

ipv6: sit: Unmask upper DSCP bits in ipip6_tunnel_bind_dev() Unmask the upper DSCP bits when calling ip_route_output_ports() so that in the future it could perform the FIB lookup according to the full DSCP value. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240903135327.2810535-5-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2024-09-03 16:53:27 +03:00

ipv4: Create and use route lookup helpers. The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>

2011-03-12 00:00:52 -05:00

ipv4: Make output route lookup return rtable directly. Instead of on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>

2011-03-02 14:31:35 -08:00

net-next: remove useless union keyword remove useless union keyword in rtable, rt6_info and dn_route. Since there is only one member in a union, the union keyword isn't useful. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-06-10 23:31:35 -07:00

[IPV6] sit: Rebinding of SIT tunnels to other interfaces This is similar to the change already done for IPIP tunnels. Once created, a SIT tunnel can't be bound to another device. To reproduce: # create a tunnel: ip tunnel add tunneltest0 mode sit remote 10.0.0.1 dev eth0 # try to change the bounding device from eth0 to eth1: ip tunnel change tunneltest0 dev eth1 # show the result: ip tunnel show tunneltest0 tunneltest0: ipv6/ip remote 10.0.0.1 local any dev eth0 ttl inherit Notice the bound device has not changed from eth0 to eth1. This patch fixes it. When changing the binding, it also recalculates the MTU according to the new bound device's MTU. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-12-13 09:47:00 -08:00

sit: add support of x-netns This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-26 16:11:28 +02:00

[IPV6] sit: Rebinding of SIT tunnels to other interfaces This is similar to the change already done for IPIP tunnels. Once created, a SIT tunnel can't be bound to another device. To reproduce: # create a tunnel: ip tunnel add tunneltest0 mode sit remote 10.0.0.1 dev eth0 # try to change the bounding device from eth0 to eth1: ip tunnel change tunneltest0 dev eth1 # show the result: ip tunnel show tunneltest0 tunneltest0: ipv6/ip remote 10.0.0.1 local any dev eth0 ttl inherit Notice the bound device has not changed from eth0 to eth1. This patch fixes it. When changing the binding, it also recalculates the MTU according to the new bound device's MTU. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-12-13 09:47:00 -08:00

vrf: sit mtu should not be updated when vrf netdev is the link VRF netdev mtu isn't typically set and have an mtu of 65536. When the link of a tunnel is set, the tunnel mtu is changed from 1480 to the link mtu minus tunnel header. In the case of VRF netdev is the link, then the tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in this case. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-05-06 15:00:01 -04:00

ipv6: ensure sane device mtu in tunnels Another syzbot report [1] with no reproducer hints at a bug in ip6_gre tunnel (dev:ip6gretap0) Since ipv6 mcast code makes sure to read dev->mtu once and applies a sanity check on it (see commit b9b312a7a451 "ipv6: mcast: better catch silly mtu values"), a remaining possibility is that a layer is able to set dev->mtu to an underflowed value (high order bit set). This could happen indeed in ip6gre_tnl_link_config_route(), ip6_tnl_link_config() and ipip6_tunnel_bind_dev() Make sure to sanitize mtu value in a local variable before it is written once on dev->mtu, as lockless readers could catch wrong temporary value. [1] skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:120 Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022 Workqueue: mld mld_ifc_work pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116 lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116 sp : ffff800020dd3b60 x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800 x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200 x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38 x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9 x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80 x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80 x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00 x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic+0x4c/0x50 net/core/skbuff.c:116 skb_over_panic net/core/skbuff.c:125 [inline] skb_put+0xd4/0xdc net/core/skbuff.c:2049 ip6_mc_hdr net/ipv6/mcast.c:1714 [inline] mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765 add_grhead net/ipv6/mcast.c:1851 [inline] add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989 mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115 mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653 process_one_work+0x2d8/0x504 kernel/workqueue.c:2289 worker_thread+0x340/0x610 kernel/workqueue.c:2436 kthread+0x12c/0x158 kernel/kthread.c:376 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000) Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221024020124.3756833-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2022-10-23 19:01:24 -07:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

ipv6: ensure sane device mtu in tunnels Another syzbot report [1] with no reproducer hints at a bug in ip6_gre tunnel (dev:ip6gretap0) Since ipv6 mcast code makes sure to read dev->mtu once and applies a sanity check on it (see commit b9b312a7a451 "ipv6: mcast: better catch silly mtu values"), a remaining possibility is that a layer is able to set dev->mtu to an underflowed value (high order bit set). This could happen indeed in ip6gre_tnl_link_config_route(), ip6_tnl_link_config() and ipip6_tunnel_bind_dev() Make sure to sanitize mtu value in a local variable before it is written once on dev->mtu, as lockless readers could catch wrong temporary value. [1] skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:120 Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022 Workqueue: mld mld_ifc_work pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116 lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116 sp : ffff800020dd3b60 x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800 x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200 x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38 x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9 x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80 x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80 x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00 x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic+0x4c/0x50 net/core/skbuff.c:116 skb_over_panic net/core/skbuff.c:125 [inline] skb_put+0xd4/0xdc net/core/skbuff.c:2049 ip6_mc_hdr net/ipv6/mcast.c:1714 [inline] mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765 add_grhead net/ipv6/mcast.c:1851 [inline] add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989 mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115 mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653 process_one_work+0x2d8/0x504 kernel/workqueue.c:2289 worker_thread+0x340/0x610 kernel/workqueue.c:2436 kthread+0x12c/0x158 kernel/kthread.c:376 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000) Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221024020124.3756833-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2022-10-23 19:01:24 -07:00

sit: update dev->needed_headroom in ipip6_tunnel_bind_dev() When a tunnel device is bound with the underlying device, its dev->needed_headroom needs to be updated properly. IPv4 tunnels already do the same in ip_tunnel_bind_dev(). Otherwise we may not have enough header room for skb, especially after commit b17f709a2401 ("gue: TX support for using remote checksum offload option"). Fixes: 32b8a8e59c9c ("sit: add IPv4 over IPv4 support") Reported-by: Palash Oswal <oswalpalash@gmail.com> Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/ Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2023-04-26 23:00:06 -07:00

[IPV6] sit: Rebinding of SIT tunnels to other interfaces This is similar to the change already done for IPIP tunnels. Once created, a SIT tunnel can't be bound to another device. To reproduce: # create a tunnel: ip tunnel add tunneltest0 mode sit remote 10.0.0.1 dev eth0 # try to change the bounding device from eth0 to eth1: ip tunnel change tunneltest0 dev eth1 # show the result: ip tunnel show tunneltest0 tunneltest0: ipv6/ip remote 10.0.0.1 local any dev eth0 ttl inherit Notice the bound device has not changed from eth0 to eth1. This patch fixes it. When changing the binding, it also recalculates the MTU according to the new bound device's MTU. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-12-13 09:47:00 -08:00

sit: update dev->needed_headroom in ipip6_tunnel_bind_dev() When a tunnel device is bound with the underlying device, its dev->needed_headroom needs to be updated properly. IPv4 tunnels already do the same in ip_tunnel_bind_dev(). Otherwise we may not have enough header room for skb, especially after commit b17f709a2401 ("gue: TX support for using remote checksum offload option"). Fixes: 32b8a8e59c9c ("sit: add IPv4 over IPv4 support") Reported-by: Palash Oswal <oswalpalash@gmail.com> Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/ Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2023-04-26 23:00:06 -07:00

[IPV6] sit: Rebinding of SIT tunnels to other interfaces This is similar to the change already done for IPIP tunnels. Once created, a SIT tunnel can't be bound to another device. To reproduce: # create a tunnel: ip tunnel add tunneltest0 mode sit remote 10.0.0.1 dev eth0 # try to change the bounding device from eth0 to eth1: ip tunnel change tunneltest0 dev eth1 # show the result: ip tunnel show tunneltest0 tunneltest0: ipv6/ip remote 10.0.0.1 local any dev eth0 ttl inherit Notice the bound device has not changed from eth0 to eth1. This patch fixes it. When changing the binding, it also recalculates the MTU according to the new bound device's MTU. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-12-13 09:47:00 -08:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: add support of x-netns This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-26 16:11:28 +02:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

ip: use dev_addr_set() in tunnels Use dev_addr_set() instead of writing to netdev->dev_addr directly in ip tunnels drivers. Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2021-10-12 09:06:34 -07:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: update frag_off info After parsing the sit netlink change info, we forget to update frag_off in ipip6_tunnel_update(). Fix it by assigning frag_off with new value. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-11-30 10:41:14 +08:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

ip_tunnel: replace dst_cache with generic implementation The current ip_tunnel cache implementation is prone to a race that will cause the wrong dst to be cached on cuncurrent dst cache miss and ip tunnel update via netlink. Replacing with the generic implementation fix the issue. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-12 15:43:55 +01:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

ip_tunnel: replace dst_cache with generic implementation The current ip_tunnel cache implementation is prone to a race that will cause the wrong dst to be cached on cuncurrent dst cache miss and ip tunnel update via netlink. Replacing with the generic implementation fix the issue. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-12 15:43:55 +01:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

sit: make function ipip6_valid_ip_proto() static Fixes the following sparse warning: net/ipv6/sit.c:1129:6: warning: symbol 'ipip6_valid_ip_proto' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-08-13 01:54:15 +00:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

sit: impement ->ndo_tunnel_ctl Implement the ->ndo_tunnel_ctl method, and use ip_tunnel_ioctl to handle userspace requests for the SIOCGETTUNNEL, SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:16 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

sit: impement ->ndo_tunnel_ctl Implement the ->ndo_tunnel_ctl method, and use ip_tunnel_ioctl to handle userspace requests for the SIOCGETTUNNEL, SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:16 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

sit: impement ->ndo_tunnel_ctl Implement the ->ndo_tunnel_ctl method, and use ip_tunnel_ioctl to handle userspace requests for the SIOCGETTUNNEL, SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:16 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

sit: impement ->ndo_tunnel_ctl Implement the ->ndo_tunnel_ctl method, and use ip_tunnel_ioctl to handle userspace requests for the SIOCGETTUNNEL, SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:16 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

sit: impement ->ndo_tunnel_ctl Implement the ->ndo_tunnel_ctl method, and use ip_tunnel_ioctl to handle userspace requests for the SIOCGETTUNNEL, SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:16 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

sit: impement ->ndo_tunnel_ctl Implement the ->ndo_tunnel_ctl method, and use ip_tunnel_ioctl to handle userspace requests for the SIOCGETTUNNEL, SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:16 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

sit: impement ->ndo_tunnel_ctl Implement the ->ndo_tunnel_ctl method, and use ip_tunnel_ioctl to handle userspace requests for the SIOCGETTUNNEL, SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:16 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

sit: impement ->ndo_tunnel_ctl Implement the ->ndo_tunnel_ctl method, and use ip_tunnel_ioctl to handle userspace requests for the SIOCGETTUNNEL, SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:16 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

sit: impement ->ndo_tunnel_ctl Implement the ->ndo_tunnel_ctl method, and use ip_tunnel_ioctl to handle userspace requests for the SIOCGETTUNNEL, SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:16 +02:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

sit: impement ->ndo_tunnel_ctl Implement the ->ndo_tunnel_ctl method, and use ip_tunnel_ioctl to handle userspace requests for the SIOCGETTUNNEL, SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:16 +02:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

sit: impement ->ndo_tunnel_ctl Implement the ->ndo_tunnel_ctl method, and use ip_tunnel_ioctl to handle userspace requests for the SIOCGETTUNNEL, SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:16 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-24 18:28:39 +09:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

[IPV6] SIT: Add PRL management for ISATAP. This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

2008-03-11 18:35:59 -04:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-22 23:43:14 +00:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-22 23:43:14 +00:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-09-22 23:43:14 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: refactor ipip6_tunnel_ioctl Split the ioctl handler into one function per command instead of having a all the logic sit in one giant switch statement. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:15 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6: convert tunnels to net_device_ops Like IPV4, convert the tunnel virtual devices to use net_device_ops. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-11-20 20:33:56 -08:00

sit: Use ipip6_tunnel_init as the ndo_init function. ipip6_tunnel_init() sets the dev->iflink via a call to ipip6_tunnel_bind_dev(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ipip6_tunnel_init() as the ndo_init function. Then ipip6_tunnel_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-11-03 09:19:29 +01:00

ipv6: convert tunnels to net_device_ops Like IPV4, convert the tunnel virtual devices to use net_device_ops. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-11-20 20:33:56 -08:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

ip_tunnel: use ndo_siocdevprivate The various ipv4 and ipv6 tunnel drivers each implement a set of 12 SIOCDEVPRIVATE commands for managing tunnels. These all work correctly in compat mode. Move them over to the new .ndo_siocdevprivate operation. Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-07-27 15:45:06 +02:00

ipip,gre,vti,sit: implement ndo_get_iflink Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-04-02 17:07:02 +02:00

sit: impement ->ndo_tunnel_ctl Implement the ->ndo_tunnel_ctl method, and use ip_tunnel_ioctl to handle userspace requests for the SIOCGETTUNNEL, SIOCADDTUNNEL, SIOCCHGTUNNEL and SIOCDELTUNNEL ioctls. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-19 15:03:16 +02:00

ipv6: convert tunnels to net_device_ops Like IPV4, convert the tunnel virtual devices to use net_device_ops. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-11-20 20:33:56 -08:00

sit: percpu stats accounting Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-27 00:38:18 +00:00

sit: fix panic with route cache in ip tunnels Bug introduced by commit 7d442fab0a67 ("ipv4: Cache dst in tunnels"). Because sit code does not call ip_tunnel_init(), the dst_cache was not initialized. CC: Tom Herbert <therbert@google.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-02-20 10:19:31 +01:00

ip_tunnel: replace dst_cache with generic implementation The current ip_tunnel cache implementation is prone to a race that will cause the wrong dst to be cached on cuncurrent dst cache miss and ip tunnel update via netlink. Replacing with the generic implementation fix the issue. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-12 15:43:55 +01:00

sit: percpu stats accounting Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-27 00:38:18 +00:00

ipv6: sit: add GSO/TSO support Now ipv6_gso_segment() is stackable, its relatively easy to implement GSO/TSO support for SIT tunnels Performance results, when segmentation is done after tunnel device (as no NIC is yet enabled for TSO SIT support) : Before patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 3168.31 4.81 4.64 2.988 2.877 After patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 5525.00 7.76 5.17 2.763 1.840 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-10-20 20:47:30 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

ipv6: convert tunnels to net_device_ops Like IPV4, convert the tunnel virtual devices to use net_device_ops. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-11-20 20:33:56 -08:00

net: sit: implement header_ops->parse_protocol for AF_PACKET Sit uses skb->protocol to determine packet type, and bails out if it's not set. For AF_PACKET injection, we need to support its call chain of: packet_sendmsg -> packet_snd -> packet_parse_headers -> dev_parse_header_protocol -> parse_protocol Without a valid parse_protocol, this returns zero, and sit rejects the skb. So, this wires up the ip_tunnel handler for layer 3 packets for that case. Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-06-29 19:06:24 -06:00

2017-05-08 12:52:56 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

ipv4/6: use core net MTU range checking ipv4/ip_tunnel: - min_mtu = 68, max_mtu = 0xFFF8 - dev->hard_header_len - t_hlen - preserve all ndo_change_mtu checks for now to prevent regressions ipv6/ip6_tunnel: - min_mtu = 68, max_mtu = 0xFFF8 - dev->hard_header_len - preserve all ndo_change_mtu checks for now to prevent regressions ipv6/ip6_vti: - min_mtu = 1280, max_mtu = 65535 - remove redundant vti6_change_mtu ipv6/sit: - min_mtu = 1280, max_mtu = 0xFFF8 - t_hlen - remove redundant ipip6_tunnel_change_mtu CC: netdev@vger.kernel.org CC: "David S. Miller" <davem@davemloft.net> CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> CC: James Morris <jmorris@namei.org> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-10-20 13:55:24 -04:00

ip6_tunnel: remove magic mtu value 0xFFF8 I don't know where this value comes from (probably a copy and paste and paste and paste ...). Let's use standard values which are a bit greater. Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/netdev-vger-cvs.git/commit/?id=e5afd356a411a Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-05-31 10:59:33 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: better IFF_XMIT_DST_RELEASE support Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-10-05 18:38:35 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

netdev_features: convert NETIF_F_LLTX to dev->lltx NETIF_F_LLTX can't be changed via Ethtool and is not a feature, rather an attribute, very similar to IFF_NO_QUEUE (and hot). Free one netdev_features_t bit and make it a "hot" private flag. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>

2024-08-29 14:33:37 +02:00

ipv6: sit: add GSO/TSO support Now ipv6_gso_segment() is stackable, its relatively easy to implement GSO/TSO support for SIT tunnels Performance results, when segmentation is done after tunnel device (as no NIC is yet enabled for TSO SIT support) : Before patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 3168.31 4.81 4.64 2.988 2.877 After patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 5525.00 7.76 5.17 2.763 1.840 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-10-20 20:47:30 -07:00

ipv6/sit: Do not allocate stats in the driver With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Remove the allocation in the ipv6/sit driver and leverage the network core allocation. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240221161732.3026127-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2024-02-21 08:17:32 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: percpu stats accounting Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-27 00:38:18 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

ipv6: convert tunnels to net_device_ops Like IPV4, convert the tunnel virtual devices to use net_device_ops. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-11-20 20:33:56 -08:00

ip_tunnel: replace dst_cache with generic implementation The current ip_tunnel cache implementation is prone to a race that will cause the wrong dst to be cached on cuncurrent dst cache miss and ip tunnel update via netlink. Replacing with the generic implementation fix the issue. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-12 15:43:55 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: Use ipip6_tunnel_init as the ndo_init function. ipip6_tunnel_init() sets the dev->iflink via a call to ipip6_tunnel_bind_dev(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ipip6_tunnel_init() as the ndo_init function. Then ipip6_tunnel_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-11-03 09:19:29 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPV6] sit: Rebinding of SIT tunnels to other interfaces This is similar to the change already done for IPIP tunnels. Once created, a SIT tunnel can't be bound to another device. To reproduce: # create a tunnel: ip tunnel add tunneltest0 mode sit remote 10.0.0.1 dev eth0 # try to change the bounding device from eth0 to eth1: ip tunnel change tunneltest0 dev eth1 # show the result: ip tunnel show tunneltest0 tunneltest0: ipv6/ip remote 10.0.0.1 local any dev eth0 ttl inherit Notice the bound device has not changed from eth0 to eth1. This patch fixes it. When changing the binding, it also recalculates the MTU according to the new bound device's MTU. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-12-13 09:47:00 -08:00

sit: percpu stats accounting Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-27 00:38:18 +00:00

ip_tunnel: replace dst_cache with generic implementation The current ip_tunnel cache implementation is prone to a race that will cause the wrong dst to be cached on cuncurrent dst cache miss and ip tunnel update via netlink. Replacing with the generic implementation fix the issue. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-12 15:43:55 +01:00

ipv6/sit: Do not allocate stats in the driver With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Remove the allocation in the ipv6/sit driver and leverage the network core allocation. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240221161732.3026127-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2024-02-21 08:17:32 -08:00

ip_tunnel: replace dst_cache with generic implementation The current ip_tunnel cache implementation is prone to a race that will cause the wrong dst to be cached on cuncurrent dst cache miss and ip tunnel update via netlink. Replacing with the generic implementation fix the issue. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-12 15:43:55 +01:00

ipv6/sit: Do not allocate stats in the driver With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Remove the allocation in the ipv6/sit driver and leverage the network core allocation. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240221161732.3026127-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2024-02-21 08:17:32 -08:00

net: rename reference+tracking helpers Netdev reference helpers have a dev_ prefix for historic reasons. Renaming the old helpers would be too much churn but we can rename the tracking ones which are relatively recent and should be the default for new code. Rename: dev_hold_track() -> netdev_hold() dev_put_track() -> netdev_put() dev_replace_track() -> netdev_ref_replace() Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2022-06-07 21:39:55 -07:00

2024-02-12 14:07:00 +00:00

sit: percpu stats accounting Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-09-27 00:38:18 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: fix sit0 percpu double allocations sit0 device allocates its percpu storage twice : - One time in ipip6_tunnel_init() - One time in ipip6_fb_tunnel_init() Thus we leak 48 bytes per possible cpu per network namespace dismantle. ipip6_fb_tunnel_init() can be much simpler and does not return an error, and should be called after register_netdev() Note that ipip6_tunnel_clone_6rd() also needs to be called after register_netdev() (calling ipip6_tunnel_init()) Fixes: ebe084aafb7e ("sit: Use ipip6_tunnel_init as the ndo_init function.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-11-02 17:08:19 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[NET]: Convert net/{ipv4,ipv6,sched} to netdev_priv Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>

2006-01-08 22:05:26 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[SIT]: Make tunnels hashes per-net. Just move all the hashes on the sit_net structure and patch the rest of the code appropriately. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:16:38 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: reintroduce missing rcu_assign_pointer() calls commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTER) did a lot of incorrect changes, since it did a complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x, y). We miss needed barriers, even on x86, when y is not NULL. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-01-12 04:41:32 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: add netlink_ext_ack argument to rtnl_link_ops.validate Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-06-25 23:56:01 +02:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: fix an oops when IFLA_IPTUN_PROTO is not set The use of this attribute has been added in 32b8a8e59c9c (sit: add IPv4 over IPv4 support). It is optional, by default proto is IPPROTO_IPV6. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-19 12:03:13 +02:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

net: Add helper function to parse netlink msg of ip_tunnel_parm Add ip_tunnel_netlink_parms to parse netlink msg of ip_tunnel_parm. Reduces duplicate code, no actual functional changes. Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2022-09-29 21:52:03 +08:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

netlink: implement nla_get_in_addr and nla_get_in6_addr Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-03-29 16:59:26 +02:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

rtnetlink: Pack newlink() params into struct There are 4 net namespaces involved when creating links: - source netns - where the netlink socket resides, - target netns - where to put the device being created, - link netns - netns associated with the device (backend), - peer netns - netns of peer device. Currently, two nets are passed to newlink() callback - "src_net" parameter and "dev_net" (implicitly in net_device). They are set as follows, depending on netlink attributes in the request. +------------+-------------------+---------+---------+ | peer netns | IFLA_LINK_NETNSID | src_net | dev_net | +------------+-------------------+---------+---------+ | | absent | source | target | | absent +-------------------+---------+---------+ | | present | link | link | +------------+-------------------+---------+---------+ | | absent | peer | target | | present +-------------------+---------+---------+ | | present | peer | link | +------------+-------------------+---------+---------+ When IFLA_LINK_NETNSID is present, the device is created in link netns first and then moved to target netns. This has some side effects, including extra ifindex allocation, ifname validation and link events. These could be avoided if we create it in target netns from the beginning. On the other hand, the meaning of src_net parameter is ambiguous. It varies depending on how parameters are passed. It is the effective link (or peer netns) by design, but some drivers ignore it and use dev_net instead. To provide more netns context for drivers, this patch packs existing newlink() parameters, along with the source netns, link netns and peer netns, into a struct. The old "src_net" is renamed to "net" to avoid confusion with real source netns, and will be deprecated later. The use of src_net are converted to params->net trivially. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-02-19 20:50:28 +08:00

net: add netlink_ext_ack argument to rtnl_link_ops.newlink Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-06-25 23:55:59 +02:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

rtnetlink: Pack newlink() params into struct There are 4 net namespaces involved when creating links: - source netns - where the netlink socket resides, - target netns - where to put the device being created, - link netns - netns associated with the device (backend), - peer netns - netns of peer device. Currently, two nets are passed to newlink() callback - "src_net" parameter and "dev_net" (implicitly in net_device). They are set as follows, depending on netlink attributes in the request. +------------+-------------------+---------+---------+ | peer netns | IFLA_LINK_NETNSID | src_net | dev_net | +------------+-------------------+---------+---------+ | | absent | source | target | | absent +-------------------+---------+---------+ | | present | link | link | +------------+-------------------+---------+---------+ | | absent | peer | target | | present +-------------------+---------+---------+ | | present | peer | link | +------------+-------------------+---------+---------+ When IFLA_LINK_NETNSID is present, the device is created in link netns first and then moved to target netns. This has some side effects, including extra ifindex allocation, ifname validation and link events. These could be avoided if we create it in target netns from the beginning. On the other hand, the meaning of src_net parameter is ambiguous. It varies depending on how parameters are passed. It is the effective link (or peer netns) by design, but some drivers ignore it and use dev_net instead. To provide more netns context for drivers, this patch packs existing newlink() parameters, along with the source netns, link netns and peer netns, into a struct. The old "src_net" is renamed to "net" to avoid confusion with real source netns, and will be deprecated later. The use of src_net are converted to params->net trivially. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-02-19 20:50:28 +08:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

net: ipv6: Use link netns in newlink() of rtnl_link_ops When link_net is set, use it as link netns instead of dev_net(). This prepares for rtnetlink core to create device in target netns directly, in which case the two namespaces may be different. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-9-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-02-19 20:50:34 +08:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

net: ipv6: Use link netns in newlink() of rtnl_link_ops When link_net is set, use it as link netns instead of dev_net(). This prepares for rtnetlink core to create device in target netns directly, in which case the two namespaces may be different. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-9-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-02-19 20:50:34 +08:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

net: ipv6: Init tunnel link-netns before registering dev Currently some IPv6 tunnel drivers set tnl->net to dev_net(dev) in ndo_init(), which is called in register_netdevice(). However, it lacks the context of link-netns when we enable cross-net tunnels at device registration time. Let's move the init of tunnel link-netns before register_netdevice(). ip6_gre has already initialized netns, so just remove the redundant assignment. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-8-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-02-19 20:50:33 +08:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

net: Add helper function to parse netlink msg of ip_tunnel_encap Add ip_tunnel_netlink_encap_parms to parse netlink msg of ip_tunnel_encap. Reduces duplicate code, no actual functional changes. Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2022-09-29 21:52:02 +08:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

sit: fix IFLA_MTU ignored on NEWLINK Commit 128bb975dc3c ("ip6_gre: init dev->mtu and dev->hard_header_len correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same mtu fix is also needed for sit. Note that dev->hard_header_len setting for sit works fine, no need to fix it. sit is actually ipv4 tunnel, it can't call ip6_tnl_change_mtu to set mtu. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-02-27 19:19:41 +08:00

ip6_tunnel: remove magic mtu value 0xFFF8 I don't know where this value comes from (probably a copy and paste and paste and paste ...). Let's use standard values which are a bit greater. Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/netdev-vger-cvs.git/commit/?id=e5afd356a411a Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-05-31 10:59:33 +02:00

sit: fix IFLA_MTU ignored on NEWLINK Commit 128bb975dc3c ("ip6_gre: init dev->mtu and dev->hard_header_len correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same mtu fix is also needed for sit. Note that dev->hard_header_len setting for sit works fine, no need to fix it. sit is actually ipv4 tunnel, it can't call ip6_tnl_change_mtu to set mtu. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-02-27 19:19:41 +08:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

net: sit: unregister_netdevice on newlink's error path We need to unregister the netdevice if config failed. .ndo_uninit takes care of most of the heavy lifting. This was uncovered by recent commit c269a24ce057 ("net: make free_netdev() more lenient with unregistering devices"). Previously the partially-initialized device would be left in the system. Reported-and-tested-by: syzbot+2393580080a2da190f04@syzkaller.appspotmail.com Fixes: e2f1f072db8d ("sit: allow to configure 6rd tunnels via netlink") Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20210114012947.2515313-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2021-01-13 17:29:47 -08:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

net: sit: unregister_netdevice on newlink's error path We need to unregister the netdevice if config failed. .ndo_uninit takes care of most of the heavy lifting. This was uncovered by recent commit c269a24ce057 ("net: make free_netdev() more lenient with unregistering devices"). Previously the partially-initialized device would be left in the system. Reported-and-tested-by: syzbot+2393580080a2da190f04@syzkaller.appspotmail.com Fixes: e2f1f072db8d ("sit: allow to configure 6rd tunnels via netlink") Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20210114012947.2515313-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2021-01-13 17:29:47 -08:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

net: add netlink_ext_ack argument to rtnl_link_ops.changelink Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-06-25 23:56:00 +02:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: fix tunnel update via netlink The device can stand in another netns, hence we need to do the lookup in netns tunnel->net. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-07-03 17:00:34 +02:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

sit: fix tunnel update via netlink The device can stand in another netns, hence we need to do the lookup in netns tunnel->net. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-07-03 17:00:34 +02:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

net: Add helper function to parse netlink msg of ip_tunnel_encap Add ip_tunnel_netlink_encap_parms to parse netlink msg of ip_tunnel_encap. Reduces duplicate code, no actual functional changes. Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2022-09-29 21:52:02 +08:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: rename rtnl functions for consistency Functions in this file start with ipip6_. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:06 +00:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

sit/rtnl: add missing parameters on dump IFLA_IPTUN_FLAGS and IFLA_IPTUN_PMTUDISC were missing. There is only one possible flag in i_flag: SIT_ISATAP. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:05 +00:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

sit: rename rtnl functions for consistency Functions in this file start with ipip6_. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:06 +00:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

ip_tunnel: use a separate struct to store tunnel params in the kernel Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure to store params inside the kernel, IPv4 tunnel code uses the same ip_tunnel_parm which is being used to talk with the userspace. This makes it difficult to alter or add any fields or use a different format for whatever data. Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for now, and use it throughout the code. Define the pieces, where the copy user <-> kernel happens, as standalone functions, and copy the data there field-by-field, so that the kernel-side structure could be easily modified later on and the users wouldn't have to care about this. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:52 +01:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

netlink: implement nla_put_in_addr and nla_put_in6_addr IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-03-29 16:59:25 +02:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

sit/rtnl: add missing parameters on dump IFLA_IPTUN_FLAGS and IFLA_IPTUN_PMTUDISC were missing. There is only one possible flag in i_flag: SIT_ISATAP. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:05 +00:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

ip_tunnel: convert __be16 tunnel flags to bitmaps Historically, tunnel flags like TUNNEL_CSUM or TUNNEL_ERSPAN_OPT have been defined as __be16. Now all of those 16 bits are occupied and there's no more free space for new flags. It can't be simply switched to a bigger container with no adjustments to the values, since it's an explicit Endian storage, and on LE systems (__be16)0x0001 equals to (__be64)0x0001000000000000. We could probably define new 64-bit flags depending on the Endianness, i.e. (__be64)0x0001 on BE and (__be64)0x00010000... on LE, but that would introduce an Endianness dependency and spawn a ton of Sparse warnings. To mitigate them, all of those places which were adjusted with this change would be touched anyway, so why not define stuff properly if there's no choice. Define IP_TUNNEL_*_BIT counterparts as a bit number instead of the value already coded and a fistful of <16 <-> bitmap> converters and helpers. The two flags which have a different bit position are SIT_ISATAP_BIT and VTI_ISVTI_BIT, as they were defined not as __cpu_to_be16(), but as (__force __be16), i.e. had different positions on LE and BE. Now they both have strongly defined places. Change all __be16 fields which were used to store those flags, to IP_TUNNEL_DECLARE_FLAGS() -> DECLARE_BITMAP(__IP_TUNNEL_FLAG_NUM) -> unsigned long[1] for now, and replace all TUNNEL_* occurrences to their bitmap counterparts. Use the converters in the places which talk to the userspace, hardware (NFP) or other hosts (GRE header). The rest must explicitly use the new flags only. This must be done at once, otherwise there will be too many conversions throughout the code in the intermediate commits. Finally, disable the old __be16 flags for use in the kernel code (except for the two 'irregular' flags mentioned above), to prevent any accidental (mis)use of them. For the userspace, nothing is changed, only additions were made. Most noticeable bloat-o-meter difference (.text): vmlinux: 307/-1 (306) gre.ko: 62/0 (62) ip_gre.ko: 941/-217 (724) [*] ip_tunnel.ko: 390/-900 (-510) [**] ip_vti.ko: 138/0 (138) ip6_gre.ko: 534/-18 (516) [*] ip6_tunnel.ko: 118/-10 (108) [*] gre_flags_to_tnl_flags() grew, but still is inlined [**] ip_tunnel_find() got uninlined, hence such decrease The average code size increase in non-extreme case is 100-200 bytes per module, mostly due to sizeof(long) > sizeof(__be16), as %__IP_TUNNEL_FLAG_NUM is less than %BITS_PER_LONG and the compilers are able to expand the majority of bitmap_*() calls here into direct operations on scalars. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2024-03-27 16:23:53 +01:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

netlink: implement nla_put_in_addr and nla_put_in6_addr IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-03-29 16:59:25 +02:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

sit: fix some __be16/u16 mismatches Fixes following sparse warnings : net/ipv6/sit.c:1509:32: warning: incorrect type in assignment (different base types) net/ipv6/sit.c:1509:32: expected restricted __be16 [usertype] sport net/ipv6/sit.c:1509:32: got unsigned short net/ipv6/sit.c:1514:32: warning: incorrect type in assignment (different base types) net/ipv6/sit.c:1514:32: expected restricted __be16 [usertype] dport net/ipv6/sit.c:1514:32: got unsigned short net/ipv6/sit.c:1711:38: warning: incorrect type in argument 3 (different base types) net/ipv6/sit.c:1711:38: expected unsigned short [unsigned] [usertype] value net/ipv6/sit.c:1711:38: got restricted __be16 [usertype] sport net/ipv6/sit.c:1713:38: warning: incorrect type in argument 3 (different base types) net/ipv6/sit.c:1713:38: expected unsigned short [unsigned] [usertype] value net/ipv6/sit.c:1713:38: got restricted __be16 [usertype] dport Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-02-04 15:12:04 -08:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

sit: fix some __be16/u16 mismatches Fixes following sparse warnings : net/ipv6/sit.c:1509:32: warning: incorrect type in assignment (different base types) net/ipv6/sit.c:1509:32: expected restricted __be16 [usertype] sport net/ipv6/sit.c:1509:32: got unsigned short net/ipv6/sit.c:1514:32: warning: incorrect type in assignment (different base types) net/ipv6/sit.c:1514:32: expected restricted __be16 [usertype] dport net/ipv6/sit.c:1514:32: got unsigned short net/ipv6/sit.c:1711:38: warning: incorrect type in argument 3 (different base types) net/ipv6/sit.c:1711:38: expected unsigned short [unsigned] [usertype] value net/ipv6/sit.c:1711:38: got restricted __be16 [usertype] sport net/ipv6/sit.c:1713:38: warning: incorrect type in argument 3 (different base types) net/ipv6/sit.c:1713:38: expected unsigned short [unsigned] [usertype] value net/ipv6/sit.c:1713:38: got restricted __be16 [usertype] dport Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-02-04 15:12:04 -08:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

fou: Fix typo in returning flags in netlink When filling netlink info, dport is being returned as flags. Fix instances to return correct value. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-11-05 16:49:38 -08:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: allow to configure 6rd tunnels via netlink This patch add the support of 6RD tunnels management via netlink. Note that netdev_state_change() is now called when 6RD parameters are updated. 6RD parameters are updated only if there is at least one 6RD attribute. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-19 22:41:45 +00:00

sit: Setup and TX path for sit/UDP foo-over-udp encapsulation Added netlink handling of IP tunnel encapulation paramters, properly adjust MTU for encapsulation. Added ip_tunnel_encap call to ipip6_tunnel_xmit to actually perform FOU encapsulation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-09-17 12:25:59 -07:00

ip_tunnel: Allow policy-based routing through tunnels This feature allows the administrator to set an fwmark for packets traversing a tunnel. This allows the use of independent routing tables for tunneled packets without the use of iptables. There is no concept of per-packet routing decisions through IPv4 tunnels, so this implementation does not need to work with per-packet route lookups as the v6 implementation may (with IP6_TNL_F_USE_ORIG_FWMARK). Further, since the v4 tunnel ioctls share datastructures (which can not be trivially modified) with the kernel's internal tunnel configuration structures, the mark attribute must be stored in the tunnel structure itself and passed as a parameter when creating or changing tunnel attributes. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-04-19 12:30:54 -04:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: fix use after free of fb_tunnel_dev Bug: The fallback device is created in sit_init_net and assumed to be freed in sit_exit_net. First, it is dereferenced in that function, in sit_destroy_tunnels: struct net *net = dev_net(sitn->fb_tunnel_dev); Prior to this, rtnl_unlink_register has removed all devices that match rtnl_link_ops == sit_link_ops. Commit 205983c43700 added the line + sitn->fb_tunnel_dev->rtnl_link_ops = &sit_link_ops; which cases the fallback device to match here and be freed before it is last dereferenced. Fix: This commit adds an explicit .delllink callback to sit_link_ops that skips deallocation at rtnl_unlink_register for the fallback device. This mechanism is comparable to the one in ip_tunnel. It also modifies sit_destroy_tunnels and its only caller sit_exit_net to avoid the offending dereference in the first place. That double lookup is more complicated than required. Test: The bug is only triggered when CONFIG_NET_NS is enabled. It causes a GPF only when CONFIG_DEBUG_SLAB is enabled. Verified that this bug exists at the mentioned commit, at davem-net HEAD and at 3.11.y HEAD. Verified that it went away after applying this patch. Fixes: 205983c43700 ("sit: allow to use rtnl ops on fb tunnel") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-11-13 21:27:38 -05:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: add support of link creation via rtnl This patch add the support of 'ip link .. type sit'. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:07 +00:00

sit: rename rtnl functions for consistency Functions in this file start with ipip6_. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-14 05:14:06 +00:00

sit: fix use after free of fb_tunnel_dev Bug: The fallback device is created in sit_init_net and assumed to be freed in sit_exit_net. First, it is dereferenced in that function, in sit_destroy_tunnels: struct net *net = dev_net(sitn->fb_tunnel_dev); Prior to this, rtnl_unlink_register has removed all devices that match rtnl_link_ops == sit_link_ops. Commit 205983c43700 added the line + sitn->fb_tunnel_dev->rtnl_link_ops = &sit_link_ops; which cases the fallback device to match here and be freed before it is last dereferenced. Fix: This commit adds an explicit .delllink callback to sit_link_ops that skips deallocation at rtnl_unlink_register for the fallback device. This mechanism is comparable to the one in ip_tunnel. It also modifies sit_destroy_tunnels and its only caller sit_exit_net to avoid the offending dereference in the first place. That double lookup is more complicated than required. Test: The bug is only triggered when CONFIG_NET_NS is enabled. It causes a GPF only when CONFIG_DEBUG_SLAB is enabled. Verified that this bug exists at the mentioned commit, at davem-net HEAD and at 3.11.y HEAD. Verified that it went away after applying this patch. Fixes: 205983c43700 ("sit: allow to use rtnl ops on fb tunnel") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-11-13 21:27:38 -05:00

tunnels: advertise link netns via netlink Implement rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-01-15 15:11:17 +01:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

net: struct xfrm_tunnel in read_mostly section tunnel4_handlers chain being scanned for each incoming packet, make sure it doesnt share an often dirtied cache line. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-08-30 07:04:14 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPSEC]: make sit use the xfrm4_tunnel_register This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-02-13 12:55:25 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

ipv6: Convert tunnel devices' ->exit_batch_rtnl() to ->exit_rtnl(). The following functions iterates the dying netns list and performs the same operations for each netns. * ip6gre_exit_batch_rtnl() * ip6_tnl_exit_batch_rtnl() * vti6_exit_batch_rtnl() * sit_exit_batch_rtnl() Let's use ->exit_rtnl(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20250411205258.63164-8-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-04-11 13:52:36 -07:00

[NET]: fix oops after tunnel module unload Tunnel modules used to obtain module refcount each time when some tunnel was created, which meaned that tunnel could be unloaded only after all the tunnels are deleted. Since killing old MOD_*_USE_COUNT macros this protection has gone. It is possible to return it back as module_get/put, but it looks more natural and practically useful to force destruction of all the child tunnels on module unload. Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>

2005-07-30 17:46:44 -07:00

sit: fix use after free of fb_tunnel_dev Bug: The fallback device is created in sit_init_net and assumed to be freed in sit_exit_net. First, it is dereferenced in that function, in sit_destroy_tunnels: struct net *net = dev_net(sitn->fb_tunnel_dev); Prior to this, rtnl_unlink_register has removed all devices that match rtnl_link_ops == sit_link_ops. Commit 205983c43700 added the line + sitn->fb_tunnel_dev->rtnl_link_ops = &sit_link_ops; which cases the fallback device to match here and be freed before it is last dereferenced. Fix: This commit adds an explicit .delllink callback to sit_link_ops that skips deallocation at rtnl_unlink_register for the fallback device. This mechanism is comparable to the one in ip_tunnel. It also modifies sit_destroy_tunnels and its only caller sit_exit_net to avoid the offending dereference in the first place. That double lookup is more complicated than required. Test: The bug is only triggered when CONFIG_NET_NS is enabled. It causes a GPF only when CONFIG_DEBUG_SLAB is enabled. Verified that this bug exists at the mentioned commit, at davem-net HEAD and at 3.11.y HEAD. Verified that it went away after applying this patch. Fixes: 205983c43700 ("sit: allow to use rtnl ops on fb tunnel") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-11-13 21:27:38 -05:00

sit: add support of x-netns This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-26 16:11:28 +02:00

[NET]: fix oops after tunnel module unload Tunnel modules used to obtain module refcount each time when some tunnel was created, which meaned that tunnel could be unloaded only after all the tunnels are deleted. Since killing old MOD_*_USE_COUNT macros this protection has gone. It is possible to return it back as module_get/put, but it looks more natural and practically useful to force destruction of all the child tunnels on module unload. Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>

2005-07-30 17:46:44 -07:00

sit: add support of x-netns This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-26 16:11:28 +02:00

net: sit: Unregister catch-all devices A sit interface created without a local or a remote address is linked into the `sit_net::tunnels_wc` list of its original namespace. When deleting a network namespace, delete the devices that have been moved. The following script triggers a null pointer dereference if devices linked in a deleted `sit_net` remain: for i in `seq 1 30`; do ip netns add ns-test ip netns exec ns-test ip link add dev veth0 type veth peer veth1 ip netns exec ns-test ip link add dev sit$i type sit dev veth0 ip netns exec ns-test ip link set dev sit$i netns $$ ip netns del ns-test done for i in `seq 1 30`; do ip link del dev sit$i done Fixes: 5e6700b3bf98f ("sit: add support of x-netns") Signed-off-by: Hristo Venev <hristo@venev.name> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-04-12 20:41:16 +03:00

[NET]: fix oops after tunnel module unload Tunnel modules used to obtain module refcount each time when some tunnel was created, which meaned that tunnel could be unloaded only after all the tunnels are deleted. Since killing old MOD_*_USE_COUNT macros this protection has gone. It is possible to return it back as module_get/put, but it looks more natural and practically useful to force destruction of all the child tunnels on module unload. Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>

2005-07-30 17:46:44 -07:00

net: sit: Unregister catch-all devices A sit interface created without a local or a remote address is linked into the `sit_net::tunnels_wc` list of its original namespace. When deleting a network namespace, delete the devices that have been moved. The following script triggers a null pointer dereference if devices linked in a deleted `sit_net` remain: for i in `seq 1 30`; do ip netns add ns-test ip netns exec ns-test ip link add dev veth0 type veth peer veth1 ip netns exec ns-test ip link add dev sit$i type sit dev veth0 ip netns exec ns-test ip link set dev sit$i netns $$ ip netns del ns-test done for i in `seq 1 30`; do ip link del dev sit$i done Fixes: 5e6700b3bf98f ("sit: add support of x-netns") Signed-off-by: Hristo Venev <hristo@venev.name> Signed-off-by: David S. Miller <davem@davemloft.net>

2021-04-12 20:41:16 +03:00

net: ipv6: sit: fix rcu annotations Fix minor __rcu annotations and remove sparse warnings Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-01-20 07:16:24 +00:00

ipv6 sit: Optimize multiple unregistration Speedup module unloading by factorizing synchronize_rcu() calls Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-28 04:37:43 +00:00

ipv6: Convert tunnel devices' ->exit_batch_rtnl() to ->exit_rtnl(). The following functions iterates the dying netns list and performs the same operations for each netns. * ip6gre_exit_batch_rtnl() * ip6_tnl_exit_batch_rtnl() * vti6_exit_batch_rtnl() * sit_exit_batch_rtnl() Let's use ->exit_rtnl(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20250411205258.63164-8-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-04-11 13:52:36 -07:00

ipv6: coding style: comparison for inequality with NULL The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-03-29 14:00:05 +01:00

sit: add support of x-netns This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-26 16:11:28 +02:00

ipv4 tunnels: use net_eq() helper to check netns It's better to use available helpers for these tests. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-08-13 17:51:10 +02:00

ipv6: Convert tunnel devices' ->exit_batch_rtnl() to ->exit_rtnl(). The following functions iterates the dying netns list and performs the same operations for each netns. * ip6gre_exit_batch_rtnl() * ip6_tnl_exit_batch_rtnl() * vti6_exit_batch_rtnl() * sit_exit_batch_rtnl() Let's use ->exit_rtnl(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20250411205258.63164-8-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-04-11 13:52:36 -07:00

ipv6 sit: Optimize multiple unregistration Speedup module unloading by factorizing synchronize_rcu() calls Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-28 04:37:43 +00:00

[NET]: fix oops after tunnel module unload Tunnel modules used to obtain module refcount each time when some tunnel was created, which meaned that tunnel could be unloaded only after all the tunnels are deleted. Since killing old MOD_*_USE_COUNT macros this protection has gone. It is possible to return it back as module_get/put, but it looks more natural and practically useful to force destruction of all the child tunnels on module unload. Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>

2005-07-30 17:46:44 -07:00

net: spread __net_init, __net_exit __net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-01-17 03:35:32 +00:00

[SIT]: Introduce empty struct sit_net and init/exit net ops. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:17 -07:00

net: Simplify ipip6 aka sit pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-11-29 15:46:16 +00:00

ipip, sit: copy parms.name after register_netdevice Same fix as 731abb9cb2 for ipip and sit tunnel. Commit 1c5cae815d removed an explicit call to dev_alloc_name in ipip_tunnel_locate and ipip6_tunnel_locate, because register_netdevice will now create a valid name, however the tunnel keeps a copy of the name in the private parms structure. Fix this by copying the name back after register_netdevice has successfully returned. This shows up if you do a simple tunnel add, followed by a tunnel show: $ sudo ip tunnel add mode ipip remote 10.2.20.211 $ ip tunnel tunl0: ip/ip remote any local any ttl inherit nopmtudisc tunl%d: ip/ip remote 10.2.20.211 local any ttl inherit $ sudo ip tunnel add mode sit remote 10.2.20.212 $ ip tunnel sit0: ipv6/ip remote any local any ttl 64 nopmtudisc 6rd-prefix 2002::/16 sit%d: ioctl 89f8 failed: No such device sit%d: ipv6/ip remote 10.2.20.212 local any ttl inherit Cc: stable@vger.kernel.org Signed-off-by: Ted Feng <artisdom@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-12-08 00:46:21 +00:00

[SIT]: Introduce empty struct sit_net and init/exit net ops. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:17 -07:00

[SIT]: Make tunnels hashes per-net. Just move all the hashes on the sit_net structure and patch the rest of the code appropriately. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:16:38 -07:00

net: do not create fallback tunnels for non-default namespaces fallback tunnels (like tunl0, gre0, gretap0, erspan0, sit0, ip6tnl0, ip6gre0) are automatically created when the corresponding module is loaded. These tunnels are also automatically created when a new network namespace is created, at a great cost. In many cases, netns are used for isolation purposes, and these extra network devices are a waste of resources. We are using thousands of netns per host, and hit the netns creation/delete bottleneck a lot. (Many thanks to Kirill for recent work on this) Add a new sysctl so that we can opt-out from this automatic creation. Note that these tunnels are still created for the initial namespace, to be the least intrusive for typical setups. Tested: lpk43:~# cat add_del_unshare.sh for i in `seq 1 40` do (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) & done wait lpk43:~# echo 0 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m37.521s user 0m0.886s sys 7m7.084s lpk43:~# echo 1 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m4.761s user 0m0.851s sys 1m8.343s lpk43:~# Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-03-08 12:51:41 -08:00

[SIT]: Make the fallback tunnel device per-net Allocate and register one in sit_init_net, use sitn->fb_tunnel_dev over the code and unregister one in sit_exit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:16:18 -07:00

net: set name_assign_type in alloc_netdev() Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-07-14 16:37:24 +02:00

[SIT]: Make the fallback tunnel device per-net Allocate and register one in sit_init_net, use sitn->fb_tunnel_dev over the code and unregister one in sit_exit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:16:18 -07:00

net: fix tunnels in netns after ndo_ changes dev_net_set() should be the very first thing after alloc_netdev(). "ndo_" changes turned simple assignment (which is OK to do before netns assignment) into quite non-trivial operation (which is not OK, init_net was used). This leads to incomplete initialisation of tunnel device in netns. BUG: unable to handle kernel NULL pointer dereference at 00000004 IP: [<c02efdb5>] ip6_tnl_exit_net+0x37/0x4f *pde = 00000000 Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC last sysfs file: /sys/class/net/lo/operstate Pid: 10, comm: netns Not tainted (2.6.28-rc6 #1) EIP: 0060:[<c02efdb5>] EFLAGS: 00010246 CPU: 0 EIP is at ip6_tnl_exit_net+0x37/0x4f EAX: 00000000 EBX: 00000020 ECX: 00000000 EDX: 00000003 ESI: c5caef30 EDI: c782bbe8 EBP: c7909f50 ESP: c7909f48 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process netns (pid: 10, ti=c7908000 task=c7905780 task.ti=c7908000) Stack: c03e75e0 c7390bc8 c7909f60 c0245448 c7390bd8 c7390bf0 c7909fa8 c012577a 00000000 00000002 00000000 c0125736 c782bbe8 c7909f90 c0308fe3 c782bc04 c7390bd4 c0245406 c084b718 c04f0770 c03ad785 c782bbe8 c782bc04 c782bc0c Call Trace: [<c0245448>] ? cleanup_net+0x42/0x82 [<c012577a>] ? run_workqueue+0xd6/0x1ae [<c0125736>] ? run_workqueue+0x92/0x1ae [<c0308fe3>] ? schedule+0x275/0x285 [<c0245406>] ? cleanup_net+0x0/0x82 [<c0125ae1>] ? worker_thread+0x81/0x8d [<c0128344>] ? autoremove_wake_function+0x0/0x33 [<c0125a60>] ? worker_thread+0x0/0x8d [<c012815c>] ? kthread+0x39/0x5e [<c0128123>] ? kthread+0x0/0x5e [<c0103b9f>] ? kernel_thread_helper+0x7/0x10 Code: db e8 05 ff ff ff 89 c6 e8 dc 04 f6 ff eb 08 8b 40 04 e8 38 89 f5 ff 8b 44 9e 04 85 c0 75 f0 43 83 fb 20 75 f2 8b 86 84 00 00 00 <8b> 40 04 e8 1c 89 f5 ff e8 98 04 f6 ff 89 f0 e8 f8 63 e6 ff 5b EIP: [<c02efdb5>] ip6_tnl_exit_net+0x37/0x4f SS:ESP 0068:c7909f48 ---[ end trace 6c2f2328fccd3e0c ]--- Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-11-23 17:26:26 -08:00

sit: allow to use rtnl ops on fb tunnel rtnl ops where introduced by ba3e3f50a0e5 ("sit: advertise tunnel param via rtnl"), but I forget to assign rtnl ops to fb tunnels. Now that it is done, we must remove the explicit call to unregister_netdevice_queue(), because the fallback tunnel is added to the queue in sit_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this is valid since commit 5e6700b3bf98 ("sit: add support of x-netns")). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-10-01 18:04:59 +02:00

sit: add support of x-netns This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-06-26 16:11:28 +02:00

net: rename netns_local to netns_immutable The name 'netns_local' is confusing. A following commit will export it via netlink, so let's use a more explicit name. Reported-by: Eric Dumazet <edumazet@google.com> Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>

2025-02-28 11:20:56 +01:00

[SIT]: Make the fallback tunnel device per-net Allocate and register one in sit_init_net, use sitn->fb_tunnel_dev over the code and unregister one in sit_exit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:16:18 -07:00

net: ipv6: Init tunnel link-netns before registering dev Currently some IPv6 tunnel drivers set tnl->net to dev_net(dev) in ndo_init(), which is called in register_netdevice(). However, it lacks the context of link-netns when we enable cross-net tunnels at device registration time. Let's move the init of tunnel link-netns before register_netdevice(). ip6_gre has already initialized netns, so just remove the redundant assignment. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-8-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-02-19 20:50:33 +08:00

ipv6: coding style improvements (remove assignment in if statements) This change has no functional impact and simply addresses some coding style issues detected by checkpatch. Specifically this change adjusts "if" statements which also include the assignment of a variable. No changes to the resultant object files result as determined by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-11-23 21:28:43 +00:00

[SIT]: Make the fallback tunnel device per-net Allocate and register one in sit_init_net, use sitn->fb_tunnel_dev over the code and unregister one in sit_exit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:16:18 -07:00

sit: fix sit0 percpu double allocations sit0 device allocates its percpu storage twice : - One time in ipip6_tunnel_init() - One time in ipip6_fb_tunnel_init() Thus we leak 48 bytes per possible cpu per network namespace dismantle. ipip6_fb_tunnel_init() can be much simpler and does not return an error, and should be called after register_netdev() Note that ipip6_tunnel_clone_6rd() also needs to be called after register_netdev() (calling ipip6_tunnel_init()) Fixes: ebe084aafb7e ("sit: Use ipip6_tunnel_init as the ndo_init function.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2015-11-02 17:08:19 -08:00

ipip, sit: copy parms.name after register_netdevice Same fix as 731abb9cb2 for ipip and sit tunnel. Commit 1c5cae815d removed an explicit call to dev_alloc_name in ipip_tunnel_locate and ipip6_tunnel_locate, because register_netdevice will now create a valid name, however the tunnel keeps a copy of the name in the private parms structure. Fix this by copying the name back after register_netdevice has successfully returned. This shows up if you do a simple tunnel add, followed by a tunnel show: $ sudo ip tunnel add mode ipip remote 10.2.20.211 $ ip tunnel tunl0: ip/ip remote any local any ttl inherit nopmtudisc tunl%d: ip/ip remote 10.2.20.211 local any ttl inherit $ sudo ip tunnel add mode sit remote 10.2.20.212 $ ip tunnel sit0: ipv6/ip remote any local any ttl 64 nopmtudisc 6rd-prefix 2002::/16 sit%d: ioctl 89f8 failed: No such device sit%d: ipv6/ip remote 10.2.20.212 local any ttl inherit Cc: stable@vger.kernel.org Signed-off-by: Ted Feng <artisdom@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2011-12-08 00:46:21 +00:00

[SIT]: Introduce empty struct sit_net and init/exit net ops. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:17 -07:00

[SIT]: Make the fallback tunnel device per-net Allocate and register one in sit_init_net, use sitn->fb_tunnel_dev over the code and unregister one in sit_exit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:16:18 -07:00

net: sit: fix memory leak in sit_init_net() If register_netdev() is failed to register sitn->fb_tunnel_dev, it will go to err_reg_dev and forget to free netdev(sitn->fb_tunnel_dev). BUG: memory leak unreferenced object 0xffff888378daad00 (size 512): comm "syz-executor.1", pid 4006, jiffies 4295121142 (age 16.115s) hex dump (first 32 bytes): 00 e6 ed c0 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d6dcb63e>] kvmalloc include/linux/mm.h:577 [inline] [<00000000d6dcb63e>] kvzalloc include/linux/mm.h:585 [inline] [<00000000d6dcb63e>] netif_alloc_netdev_queues net/core/dev.c:8380 [inline] [<00000000d6dcb63e>] alloc_netdev_mqs+0x600/0xcc0 net/core/dev.c:8970 [<00000000867e172f>] sit_init_net+0x295/0xa40 net/ipv6/sit.c:1848 [<00000000871019fa>] ops_init+0xad/0x3e0 net/core/net_namespace.c:129 [<00000000319507f6>] setup_net+0x2ba/0x690 net/core/net_namespace.c:314 [<0000000087db4f96>] copy_net_ns+0x1dc/0x330 net/core/net_namespace.c:437 [<0000000057efc651>] create_new_namespaces+0x382/0x730 kernel/nsproxy.c:107 [<00000000676f83de>] copy_namespaces+0x2ed/0x3d0 kernel/nsproxy.c:165 [<0000000030b74bac>] copy_process.part.27+0x231e/0x6db0 kernel/fork.c:1919 [<00000000fff78746>] copy_process kernel/fork.c:1713 [inline] [<00000000fff78746>] _do_fork+0x1bc/0xe90 kernel/fork.c:2224 [<000000001c2e0d1c>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 [<00000000ec48bd44>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<0000000039acff8a>] 0xffffffffffffffff Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-03-01 23:06:40 +08:00

[SIT]: Make the fallback tunnel device per-net Allocate and register one in sit_init_net, use sitn->fb_tunnel_dev over the code and unregister one in sit_exit_net. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:16:18 -07:00

[SIT]: Introduce empty struct sit_net and init/exit net ops. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:17 -07:00

ipv6: Convert tunnel devices' ->exit_batch_rtnl() to ->exit_rtnl(). The following functions iterates the dying netns list and performs the same operations for each netns. * ip6gre_exit_batch_rtnl() * ip6_tnl_exit_batch_rtnl() * vti6_exit_batch_rtnl() * sit_exit_batch_rtnl() Let's use ->exit_rtnl(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20250411205258.63164-8-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2025-04-11 13:52:36 -07:00

net: Simplify ipip6 aka sit pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-11-29 15:46:16 +00:00

[SIT]: Introduce empty struct sit_net and init/exit net ops. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:17 -07:00

[IPV6] net/ipv6/sit.c: make 2 functions static This patch makes two needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2006-11-20 16:56:48 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

[IPSEC]: make sit use the xfrm4_tunnel_register This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2007-02-13 12:55:25 -08:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

[NET]: fix oops after tunnel module unload Tunnel modules used to obtain module refcount each time when some tunnel was created, which meaned that tunnel could be unloaded only after all the tunnels are deleted. Since killing old MOD_*_USE_COUNT macros this protection has gone. It is possible to return it back as module_get/put, but it looks more natural and practically useful to force destruction of all the child tunnels on module unload. Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>

2005-07-30 17:46:44 -07:00

net: Simplify ipip6 aka sit pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-11-29 15:46:16 +00:00

ipv6 sit: RCU conversion phase I SIT tunnels use one rwlock to protect their prl entries. This first patch adds RCU locking for prl management, with standard call_rcu() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-10-23 17:51:26 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPV6] net/ipv6/sit.c: make 2 functions static This patch makes two needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>

2006-11-20 16:56:48 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

net: Simplify ipip6 aka sit pernet operations. Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2009-11-29 15:46:16 +00:00

[SIT]: Introduce empty struct sit_net and init/exit net ops. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2008-04-16 01:15:17 -07:00

tunnels: fix netns vs proto registration ordering Same stuff as in ip_gre patch: receive hook can be called before netns setup is done, oopsing in net_generic(). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-02-16 09:05:04 +00:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

tunnels: fix netns vs proto registration ordering Same stuff as in ip_gre patch: receive hook can be called before netns setup is done, oopsing in net_generic(). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2010-02-16 09:05:04 +00:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

sit: support MPLS over IPv4 Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-07 07:56:13 +02:00

sit: add IPv4 over IPv4 support This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of this feature is to be able to have 4in4 and 6in4 over the same interface instead of having one interface for 6in4 and another for 4in4 even if encapsulation addresses are the same. To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is registered with a smaller priority. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2013-05-27 23:48:16 +00:00

sit: advertise tunnel param via rtnl It is usefull for daemons that monitor link event to have the full parameters of these interfaces when a rtnl message is sent. It allows also to dump them via rtnetlink. It is based on what is done for GRE tunnels. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2012-11-09 06:10:00 +00:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[IPV6]: Seperate sit driver to extra module This patch removes the driver of the IPv6-in-IPv4 tunnel driver (sit) from the IPv6 module. It adds an option to Kconfig which makes it possible to compile it as a seperate module. Signed-off-by: Joerg Roedel <joro-lkml@zlug.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2006-10-10 14:47:44 -07:00

net: fill in MODULE_DESCRIPTION()s for ipv6 modules W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the IPv6 modules. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240208164244.3818498-6-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2024-02-08 08:42:40 -08:00

[IPV6] sit: Add missing MODULE_LICENSE This is missing the MODULE_LICENSE statements and taints the kernel upon loading. License is obvious from the beginning of the file. Signed-off-by: Jan Dittmer <jdi@l4x.org> Signed-off-by: Joerg Roedel <joro-lkml@zlug.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2006-10-13 15:05:53 -07:00

net: tunnels - enable module autoloading Enable the module alias hookup to allow tunnel modules to be autoloaded on demand. This is in line with how most other netdev kinds work, and will allow userspace to create tunnels without having CAP_SYS_MODULE. Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: David S. Miller <davem@davemloft.net>

2014-05-15 23:21:30 +02:00

net: don't allow CAP_NET_ADMIN to load non-netdev kernel modules Since a8f80e8ff94ecba629542d9b4b5f5a8ee3eb565c any process with CAP_NET_ADMIN may load any module from /lib/modules/. This doesn't mean that CAP_NET_ADMIN is a superset of CAP_SYS_MODULE as modules are limited to /lib/modules/**. However, CAP_NET_ADMIN capability shouldn't allow anybody load any module not related to networking. This patch restricts an ability of autoloading modules to netdev modules with explicit aliases. This fixes CVE-2011-1019. Arnd Bergmann suggested to leave untouched the old pre-v2.6.32 behavior of loading netdev modules by name (without any prefix) for processes with CAP_SYS_MODULE to maintain the compatibility with network scripts that use autoloading netdev modules by aliases like "eth0", "wlan0". Currently there are only three users of the feature in the upstream kernel: ipip, ip_gre and sit. root@albatros:~# capsh --drop=$(seq -s, 0 11),$(seq -s, 13 34) -- root@albatros:~# grep Cap /proc/$$/status CapInh: 0000000000000000 CapPrm: fffffff800001000 CapEff: fffffff800001000 CapBnd: fffffff800001000 root@albatros:~# modprobe xfs FATAL: Error inserting xfs (/lib/modules/2.6.38-rc6-00001-g2bf4ca3/kernel/fs/xfs/xfs.ko): Operation not permitted root@albatros:~# lsmod | grep xfs root@albatros:~# ifconfig xfs xfs: error fetching interface information: Device not found root@albatros:~# lsmod | grep xfs root@albatros:~# lsmod | grep sit root@albatros:~# ifconfig sit sit: error fetching interface information: Device not found root@albatros:~# lsmod | grep sit root@albatros:~# ifconfig sit0 sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 root@albatros:~# lsmod | grep sit sit 10457 0 tunnel4 2957 1 sit For CAP_SYS_MODULE module loading is still relaxed: root@albatros:~# grep Cap /proc/$$/status CapInh: 0000000000000000 CapPrm: ffffffffffffffff CapEff: ffffffffffffffff CapBnd: ffffffffffffffff root@albatros:~# ifconfig xfs xfs: error fetching interface information: Device not found root@albatros:~# lsmod | grep xfs xfs 745319 0 Reference: https://lkml.org/lkml/2011/2/24/203 Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Kees Cook <kees.cook@canonical.com> Signed-off-by: James Morris <jmorris@namei.org>

2011-03-02 00:33:13 +03:00

1946 lines 46 KiB Raw Normal View History

1946 lines

46 KiB

Raw Normal View History