linux/drivers/block/rbd.c

7395 lines
184 KiB

atomics/treewide: Rename __atomic_add_unless() => atomic_fetch_add_unless() While __atomic_add_unless() was originally intended as a building-block for atomic_add_unless(), it's now used in a number of places around the kernel. It's the only common atomic operation named __atomic*(), rather than atomic_*(), and for consistency it would be better named atomic_fetch_add_unless(). This lack of consistency is slightly confusing, and gets in the way of scripting atomics. Given that, let's clean things up and promote it to an official part of the atomics API, in the form of atomic_fetch_add_unless(). This patch converts definitions and invocations over to the new name, including the instrumented version, using the following script: ---- git grep -w __atomic_add_unless | while read line; do sed -i '{s/\<__atomic_add_unless\>/atomic_fetch_add_unless/}' "${line%%:*}"; done git grep -w __arch_atomic_add_unless | while read line; do sed -i '{s/\<__arch_atomic_add_unless\>/arch_atomic_fetch_add_unless/}' "${line%%:*}"; done ---- Note that we do not have atomic{64,_long}_fetch_add_unless(), which will be introduced by later patches. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Palmer Dabbelt <palmer@sifive.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/20180621121321.4761-2-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-21 13:13:04 +01:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: simplify rbd_rq_fn() When processing a request, rbd_rq_fn() makes clones of the bio's in the request's bio chain and submits the results to osd's to be satisfied. If a request bio straddles the boundary between objects backing the rbd image, it must be represented by two cloned bio's, one for the first part (at the end of one object) and one for the second (at the beginning of the next object). This has been handled by a function bio_chain_clone(), which includes an interface only a mother could love, and which has been found to have other problems. This patch defines two new fairly generic bio functions (one which replaces bio_chain_clone()) to help out the situation, and then revises rbd_rq_fn() to make use of them. First, bio_clone_range() clones a portion of a single bio, starting at a given offset within the bio and including only as many bytes as requested. As a convenience, a request to clone the entire bio is passed directly to bio_clone(). Second, bio_chain_clone_range() performs a similar function, producing a chain of cloned bio's covering a sub-range of the source chain. No bio_pair structures are used, and if successful the result will represent exactly the specified range. Using bio_chain_clone_range() makes bio_rq_fn() a little easier to understand, because it avoids the need to pass very much state information between consecutive calls. By avoiding the need to track a bio_pair structure, it also eliminates the problem described here: http://tracker.newdream.net/issues/2933 Note that a block request (and therefore the complete length of a bio chain processed in rbd_rq_fn()) is an unsigned int, while the result of rbd_segment_length() is u64. This change makes this range trunctation explicit, and trips a bug if the the segment boundary is too far off. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-20 22:17:27 -05:00
rbd: simplify rbd_rq_fn() When processing a request, rbd_rq_fn() makes clones of the bio's in the request's bio chain and submits the results to osd's to be satisfied. If a request bio straddles the boundary between objects backing the rbd image, it must be represented by two cloned bio's, one for the first part (at the end of one object) and one for the second (at the beginning of the next object). This has been handled by a function bio_chain_clone(), which includes an interface only a mother could love, and which has been found to have other problems. This patch defines two new fairly generic bio functions (one which replaces bio_chain_clone()) to help out the situation, and then revises rbd_rq_fn() to make use of them. First, bio_clone_range() clones a portion of a single bio, starting at a given offset within the bio and including only as many bytes as requested. As a convenience, a request to clone the entire bio is passed directly to bio_clone(). Second, bio_chain_clone_range() performs a similar function, producing a chain of cloned bio's covering a sub-range of the source chain. No bio_pair structures are used, and if successful the result will represent exactly the specified range. Using bio_chain_clone_range() makes bio_rq_fn() a little easier to understand, because it avoids the need to pass very much state information between consecutive calls. By avoiding the need to track a bio_pair structure, it also eliminates the problem described here: http://tracker.newdream.net/issues/2933 Note that a block request (and therefore the complete length of a bio chain processed in rbd_rq_fn()) is an unsigned int, while the result of rbd_segment_length() is u64. This change makes this range trunctation explicit, and trips a bug if the the segment boundary is too far off. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-20 22:17:27 -05:00
rbd: simplify rbd_rq_fn() When processing a request, rbd_rq_fn() makes clones of the bio's in the request's bio chain and submits the results to osd's to be satisfied. If a request bio straddles the boundary between objects backing the rbd image, it must be represented by two cloned bio's, one for the first part (at the end of one object) and one for the second (at the beginning of the next object). This has been handled by a function bio_chain_clone(), which includes an interface only a mother could love, and which has been found to have other problems. This patch defines two new fairly generic bio functions (one which replaces bio_chain_clone()) to help out the situation, and then revises rbd_rq_fn() to make use of them. First, bio_clone_range() clones a portion of a single bio, starting at a given offset within the bio and including only as many bytes as requested. As a convenience, a request to clone the entire bio is passed directly to bio_clone(). Second, bio_chain_clone_range() performs a similar function, producing a chain of cloned bio's covering a sub-range of the source chain. No bio_pair structures are used, and if successful the result will represent exactly the specified range. Using bio_chain_clone_range() makes bio_rq_fn() a little easier to understand, because it avoids the need to pass very much state information between consecutive calls. By avoiding the need to track a bio_pair structure, it also eliminates the problem described here: http://tracker.newdream.net/issues/2933 Note that a block request (and therefore the complete length of a bio chain processed in rbd_rq_fn()) is an unsigned int, while the result of rbd_segment_length() is u64. This change makes this range trunctation explicit, and trips a bug if the the segment boundary is too far off. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-20 22:17:27 -05:00
rbd: simplify rbd_rq_fn() When processing a request, rbd_rq_fn() makes clones of the bio's in the request's bio chain and submits the results to osd's to be satisfied. If a request bio straddles the boundary between objects backing the rbd image, it must be represented by two cloned bio's, one for the first part (at the end of one object) and one for the second (at the beginning of the next object). This has been handled by a function bio_chain_clone(), which includes an interface only a mother could love, and which has been found to have other problems. This patch defines two new fairly generic bio functions (one which replaces bio_chain_clone()) to help out the situation, and then revises rbd_rq_fn() to make use of them. First, bio_clone_range() clones a portion of a single bio, starting at a given offset within the bio and including only as many bytes as requested. As a convenience, a request to clone the entire bio is passed directly to bio_clone(). Second, bio_chain_clone_range() performs a similar function, producing a chain of cloned bio's covering a sub-range of the source chain. No bio_pair structures are used, and if successful the result will represent exactly the specified range. Using bio_chain_clone_range() makes bio_rq_fn() a little easier to understand, because it avoids the need to pass very much state information between consecutive calls. By avoiding the need to track a bio_pair structure, it also eliminates the problem described here: http://tracker.newdream.net/issues/2933 Note that a block request (and therefore the complete length of a bio chain processed in rbd_rq_fn()) is an unsigned int, while the result of rbd_segment_length() is u64. This change makes this range trunctation explicit, and trips a bug if the the segment boundary is too far off. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-20 22:17:27 -05:00
rbd: simplify rbd_rq_fn() When processing a request, rbd_rq_fn() makes clones of the bio's in the request's bio chain and submits the results to osd's to be satisfied. If a request bio straddles the boundary between objects backing the rbd image, it must be represented by two cloned bio's, one for the first part (at the end of one object) and one for the second (at the beginning of the next object). This has been handled by a function bio_chain_clone(), which includes an interface only a mother could love, and which has been found to have other problems. This patch defines two new fairly generic bio functions (one which replaces bio_chain_clone()) to help out the situation, and then revises rbd_rq_fn() to make use of them. First, bio_clone_range() clones a portion of a single bio, starting at a given offset within the bio and including only as many bytes as requested. As a convenience, a request to clone the entire bio is passed directly to bio_clone(). Second, bio_chain_clone_range() performs a similar function, producing a chain of cloned bio's covering a sub-range of the source chain. No bio_pair structures are used, and if successful the result will represent exactly the specified range. Using bio_chain_clone_range() makes bio_rq_fn() a little easier to understand, because it avoids the need to pass very much state information between consecutive calls. By avoiding the need to track a bio_pair structure, it also eliminates the problem described here: http://tracker.newdream.net/issues/2933 Note that a block request (and therefore the complete length of a bio chain processed in rbd_rq_fn()) is an unsigned int, while the result of rbd_segment_length() is u64. This change makes this range trunctation explicit, and trips a bug if the the segment boundary is too far off. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-20 22:17:27 -05:00
Lots of exciting things this time! - support for rbd object-map and fast-diff features (myself). This will speed up reads, discards and things like snap diffs on sparse images. - ceph.snap.btime vxattr to expose snapshot creation time (David Disseldorp). This will be used to integrate with "Restore Previous Versions" feature added in Windows 7 for folks who reexport ceph through SMB. - security xattrs for ceph (Zheng Yan). Only selinux is supported for now due to the limitations of ->dentry_init_security(). - support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff Layton). This is actually a single feature bit which was missing because of the filesystem pieces. With this in, the kernel client will finally be reported as "luminous" by "ceph features" -- it is still being reported as "jewel" even though all required Luminous features were implemented in 4.13. - stop NULL-terminating ceph vxattrs (Jeff Layton). The convention with xattrs is to not terminate and this was causing inconsistencies with ceph-fuse. - change filesystem time granularity from 1 us to 1 ns, again fixing an inconsistency with ceph-fuse (Luis Henriques). On top of this there are some additional dentry name handling and cap flushing fixes from Zheng. Finally, Jeff is formally taking over for Zheng as the filesystem maintainer. -----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl0u+X8THGlkcnlvbW92 QGdtYWlsLmNvbQAKCRBKf944AhHzi9byB/9fIxzoxtDMvixtJabuGSJRtlijDlWF GlO6yIWCXl/8v8easR2PCF75U/xv0+QFQmze8PVi8u4Xz589P247NnEuyEZ9n84i aCavARho6QLZPEL+B04NaqoHBl+ORKQTA6eKGhyKwRp/rn83z5Ubuw2tN7krHT3b kCY61FuTQGxNY2o/WKv/iLwINYr7H23hCf0WwyyKH1bp7OegiQ14Ebn1NtfS3sMx hS6h8Ya826vmUW0bCSS/9kzKYBCjksTig0HphUOHq6BoZJs++0b7GukIulRyuLfD J9Gr9HGPoDCVzdmFfpn2FSlxdmqfO9amUSagd0ftLQfFlPlrpoULi0GW =Bgxr -----END PGP SIGNATURE----- Merge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client Pull ceph updates from Ilya Dryomov: "Lots of exciting things this time! - support for rbd object-map and fast-diff features (myself). This will speed up reads, discards and things like snap diffs on sparse images. - ceph.snap.btime vxattr to expose snapshot creation time (David Disseldorp). This will be used to integrate with "Restore Previous Versions" feature added in Windows 7 for folks who reexport ceph through SMB. - security xattrs for ceph (Zheng Yan). Only selinux is supported for now due to the limitations of ->dentry_init_security(). - support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff Layton). This is actually a single feature bit which was missing because of the filesystem pieces. With this in, the kernel client will finally be reported as "luminous" by "ceph features" -- it is still being reported as "jewel" even though all required Luminous features were implemented in 4.13. - stop NULL-terminating ceph vxattrs (Jeff Layton). The convention with xattrs is to not terminate and this was causing inconsistencies with ceph-fuse. - change filesystem time granularity from 1 us to 1 ns, again fixing an inconsistency with ceph-fuse (Luis Henriques). On top of this there are some additional dentry name handling and cap flushing fixes from Zheng. Finally, Jeff is formally taking over for Zheng as the filesystem maintainer" * tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits) ceph: fix end offset in truncate_inode_pages_range call ceph: use generic_delete_inode() for ->drop_inode ceph: use ceph_evict_inode to cleanup inode's resource ceph: initialize superblock s_time_gran to 1 MAINTAINERS: take over for Zheng as CephFS kernel client maintainer rbd: setallochint only if object doesn't exist rbd: support for object-map and fast-diff rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe() libceph: export osd_req_op_data() macro libceph: change ceph_osdc_call() to take page vector for response libceph: bump CEPH_MSG_MAX_DATA_LEN (again) rbd: new exclusive lock wait/wake code rbd: quiescing lock should wait for image requests rbd: lock should be quiesced on reacquire rbd: introduce copyup state machine rbd: rename rbd_obj_setup_*() to rbd_obj_init_*() rbd: move OSD request allocation into object request state machines rbd: factor out __rbd_osd_setup_discard_ops() rbd: factor out rbd_osd_setup_copyup() rbd: introduce obj_req->osd_reqs list ...
2019-07-18 11:05:25 -07:00
Lots of exciting things this time! - support for rbd object-map and fast-diff features (myself). This will speed up reads, discards and things like snap diffs on sparse images. - ceph.snap.btime vxattr to expose snapshot creation time (David Disseldorp). This will be used to integrate with "Restore Previous Versions" feature added in Windows 7 for folks who reexport ceph through SMB. - security xattrs for ceph (Zheng Yan). Only selinux is supported for now due to the limitations of ->dentry_init_security(). - support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff Layton). This is actually a single feature bit which was missing because of the filesystem pieces. With this in, the kernel client will finally be reported as "luminous" by "ceph features" -- it is still being reported as "jewel" even though all required Luminous features were implemented in 4.13. - stop NULL-terminating ceph vxattrs (Jeff Layton). The convention with xattrs is to not terminate and this was causing inconsistencies with ceph-fuse. - change filesystem time granularity from 1 us to 1 ns, again fixing an inconsistency with ceph-fuse (Luis Henriques). On top of this there are some additional dentry name handling and cap flushing fixes from Zheng. Finally, Jeff is formally taking over for Zheng as the filesystem maintainer. -----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl0u+X8THGlkcnlvbW92 QGdtYWlsLmNvbQAKCRBKf944AhHzi9byB/9fIxzoxtDMvixtJabuGSJRtlijDlWF GlO6yIWCXl/8v8easR2PCF75U/xv0+QFQmze8PVi8u4Xz589P247NnEuyEZ9n84i aCavARho6QLZPEL+B04NaqoHBl+ORKQTA6eKGhyKwRp/rn83z5Ubuw2tN7krHT3b kCY61FuTQGxNY2o/WKv/iLwINYr7H23hCf0WwyyKH1bp7OegiQ14Ebn1NtfS3sMx hS6h8Ya826vmUW0bCSS/9kzKYBCjksTig0HphUOHq6BoZJs++0b7GukIulRyuLfD J9Gr9HGPoDCVzdmFfpn2FSlxdmqfO9amUSagd0ftLQfFlPlrpoULi0GW =Bgxr -----END PGP SIGNATURE----- Merge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client Pull ceph updates from Ilya Dryomov: "Lots of exciting things this time! - support for rbd object-map and fast-diff features (myself). This will speed up reads, discards and things like snap diffs on sparse images. - ceph.snap.btime vxattr to expose snapshot creation time (David Disseldorp). This will be used to integrate with "Restore Previous Versions" feature added in Windows 7 for folks who reexport ceph through SMB. - security xattrs for ceph (Zheng Yan). Only selinux is supported for now due to the limitations of ->dentry_init_security(). - support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff Layton). This is actually a single feature bit which was missing because of the filesystem pieces. With this in, the kernel client will finally be reported as "luminous" by "ceph features" -- it is still being reported as "jewel" even though all required Luminous features were implemented in 4.13. - stop NULL-terminating ceph vxattrs (Jeff Layton). The convention with xattrs is to not terminate and this was causing inconsistencies with ceph-fuse. - change filesystem time granularity from 1 us to 1 ns, again fixing an inconsistency with ceph-fuse (Luis Henriques). On top of this there are some additional dentry name handling and cap flushing fixes from Zheng. Finally, Jeff is formally taking over for Zheng as the filesystem maintainer" * tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits) ceph: fix end offset in truncate_inode_pages_range call ceph: use generic_delete_inode() for ->drop_inode ceph: use ceph_evict_inode to cleanup inode's resource ceph: initialize superblock s_time_gran to 1 MAINTAINERS: take over for Zheng as CephFS kernel client maintainer rbd: setallochint only if object doesn't exist rbd: support for object-map and fast-diff rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe() libceph: export osd_req_op_data() macro libceph: change ceph_osdc_call() to take page vector for response libceph: bump CEPH_MSG_MAX_DATA_LEN (again) rbd: new exclusive lock wait/wake code rbd: quiescing lock should wait for image requests rbd: lock should be quiesced on reacquire rbd: introduce copyup state machine rbd: rename rbd_obj_setup_*() to rbd_obj_init_*() rbd: move OSD request allocation into object request state machines rbd: factor out __rbd_osd_setup_discard_ops() rbd: factor out rbd_osd_setup_copyup() rbd: introduce obj_req->osd_reqs list ...
2019-07-18 11:05:25 -07:00
rbd: fix rbd map vs notify races A while ago, commit 9875201e1049 ("rbd: fix use-after free of rbd_dev->disk") fixed rbd unmap vs notify race by introducing an exported wrapper for flushing notifies and sticking it into do_rbd_remove(). A similar problem exists on the rbd map path, though: the watch is registered in rbd_dev_image_probe(), while the disk is set up quite a few steps later, in rbd_dev_device_setup(). Nothing prevents a notify from coming in and crashing on a NULL rbd_dev->disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 Call Trace: [<ffffffffa0508344>] rbd_watch_cb+0x34/0x180 [rbd] [<ffffffffa04bd290>] do_event_work+0x40/0xb0 [libceph] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e3ab>] worker_thread+0x11b/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810b41b3>] ? finish_task_switch+0x53/0x170 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81645dd8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 RIP [<ffffffffa050828a>] rbd_dev_refresh+0xfa/0x180 [rbd] If an error occurs during rbd map, we have to error out, potentially tearing down a watch. Just like on rbd unmap, notifies have to be flushed, otherwise rbd_watch_cb() may end up trying to read in the image header after rbd_dev_image_release() has run: Assertion failure in rbd_dev_header_info() at line 4722: rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); Call Trace: [<ffffffff81cccee0>] ? rbd_parent_request_create+0x150/0x150 [<ffffffff81cd4e59>] rbd_dev_refresh+0x59/0x390 [<ffffffff81cd5229>] rbd_watch_cb+0x69/0x290 [<ffffffff81fde9bf>] do_event_work+0x10f/0x1c0 [<ffffffff81107799>] process_one_work+0x689/0x1a80 [<ffffffff811076f7>] ? process_one_work+0x5e7/0x1a80 [<ffffffff81132065>] ? finish_task_switch+0x225/0x640 [<ffffffff81107110>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 [<ffffffff81108c69>] worker_thread+0xd9/0x1320 [<ffffffff81108b90>] ? process_one_work+0x1a80/0x1a80 [<ffffffff8111b02d>] kthread+0x21d/0x2e0 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 [<ffffffff82022802>] ret_from_fork+0x22/0x40 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 RIP [<ffffffff81ccd8f9>] rbd_dev_header_info+0xa19/0x1e30 To fix this, a) check if RBD_DEV_FLAG_EXISTS is set before calling revalidate_disk(), b) move ceph_osdc_flush_notifies() call into rbd_dev_header_unwatch_sync() to cover rbd map error paths and c) turn header read-in into a critical section. The latter also happens to take care of rbd map foo@bar vs rbd snap rm foo@bar race. Fixes: http://tracker.ceph.com/issues/15490 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-04-15 16:22:16 +02:00
rbd: flush rbd_dev->watch_dwork after watch is unregistered There is a problem if we are going to unmap a rbd device and the watch_dwork is going to queue delayed work for watch: unmap Thread watch Thread timer do_rbd_remove cancel_tasks_sync(rbd_dev) queue_delayed_work for watch destroy_workqueue(rbd_dev->task_wq) drain_workqueue(wq) destroy other resources in wq call_timer_fn __queue_work() Then the delayed work escape the cancel_tasks_sync() and destroy_workqueue() and we will get an user-after-free call trace: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Modules linked in: CPU: 7 PID: 0 Comm: swapper/7 Tainted: G OE 4.17.0-rc6+ #13 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__queue_work+0x6a/0x3b0 RSP: 0018:ffff9427df1c3e90 EFLAGS: 00010086 RAX: ffff9427deca8400 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff9427deca8400 RSI: ffff9427df1c3e50 RDI: 0000000000000000 RBP: ffff942783e39e00 R08: ffff9427deca8400 R09: ffff9427df1c3f00 R10: 0000000000000004 R11: 0000000000000005 R12: ffff9427cfb85970 R13: 0000000000002000 R14: 000000000001eca0 R15: 0000000000000007 FS: 0000000000000000(0000) GS:ffff9427df1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000004c900a005 CR4: 00000000000206e0 Call Trace: <IRQ> ? __queue_work+0x3b0/0x3b0 call_timer_fn+0x2d/0x130 run_timer_softirq+0x16e/0x430 ? tick_sched_timer+0x37/0x70 __do_softirq+0xd2/0x280 irq_exit+0xd5/0xe0 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 [ Move rbd_dev->watch_dwork cancellation so that rbd_reregister_watch() either bails out early because the watch is UNREGISTERED at that point or just gets cancelled. ] Cc: stable@vger.kernel.org Fixes: 99d1694310df ("rbd: retry watch re-registration periodically") Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-04 06:24:37 -04:00
rbd: fix rbd map vs notify races A while ago, commit 9875201e1049 ("rbd: fix use-after free of rbd_dev->disk") fixed rbd unmap vs notify race by introducing an exported wrapper for flushing notifies and sticking it into do_rbd_remove(). A similar problem exists on the rbd map path, though: the watch is registered in rbd_dev_image_probe(), while the disk is set up quite a few steps later, in rbd_dev_device_setup(). Nothing prevents a notify from coming in and crashing on a NULL rbd_dev->disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 Call Trace: [<ffffffffa0508344>] rbd_watch_cb+0x34/0x180 [rbd] [<ffffffffa04bd290>] do_event_work+0x40/0xb0 [libceph] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e3ab>] worker_thread+0x11b/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810b41b3>] ? finish_task_switch+0x53/0x170 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81645dd8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 RIP [<ffffffffa050828a>] rbd_dev_refresh+0xfa/0x180 [rbd] If an error occurs during rbd map, we have to error out, potentially tearing down a watch. Just like on rbd unmap, notifies have to be flushed, otherwise rbd_watch_cb() may end up trying to read in the image header after rbd_dev_image_release() has run: Assertion failure in rbd_dev_header_info() at line 4722: rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); Call Trace: [<ffffffff81cccee0>] ? rbd_parent_request_create+0x150/0x150 [<ffffffff81cd4e59>] rbd_dev_refresh+0x59/0x390 [<ffffffff81cd5229>] rbd_watch_cb+0x69/0x290 [<ffffffff81fde9bf>] do_event_work+0x10f/0x1c0 [<ffffffff81107799>] process_one_work+0x689/0x1a80 [<ffffffff811076f7>] ? process_one_work+0x5e7/0x1a80 [<ffffffff81132065>] ? finish_task_switch+0x225/0x640 [<ffffffff81107110>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 [<ffffffff81108c69>] worker_thread+0xd9/0x1320 [<ffffffff81108b90>] ? process_one_work+0x1a80/0x1a80 [<ffffffff8111b02d>] kthread+0x21d/0x2e0 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 [<ffffffff82022802>] ret_from_fork+0x22/0x40 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 RIP [<ffffffff81ccd8f9>] rbd_dev_header_info+0xa19/0x1e30 To fix this, a) check if RBD_DEV_FLAG_EXISTS is set before calling revalidate_disk(), b) move ceph_osdc_flush_notifies() call into rbd_dev_header_unwatch_sync() to cover rbd map error paths and c) turn header read-in into a critical section. The latter also happens to take care of rbd map foo@bar vs rbd snap rm foo@bar race. Fixes: http://tracker.ceph.com/issues/15490 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-04-15 16:22:16 +02:00
rbd: fix rbd map vs notify races A while ago, commit 9875201e1049 ("rbd: fix use-after free of rbd_dev->disk") fixed rbd unmap vs notify race by introducing an exported wrapper for flushing notifies and sticking it into do_rbd_remove(). A similar problem exists on the rbd map path, though: the watch is registered in rbd_dev_image_probe(), while the disk is set up quite a few steps later, in rbd_dev_device_setup(). Nothing prevents a notify from coming in and crashing on a NULL rbd_dev->disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 Call Trace: [<ffffffffa0508344>] rbd_watch_cb+0x34/0x180 [rbd] [<ffffffffa04bd290>] do_event_work+0x40/0xb0 [libceph] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e3ab>] worker_thread+0x11b/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810b41b3>] ? finish_task_switch+0x53/0x170 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81645dd8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 RIP [<ffffffffa050828a>] rbd_dev_refresh+0xfa/0x180 [rbd] If an error occurs during rbd map, we have to error out, potentially tearing down a watch. Just like on rbd unmap, notifies have to be flushed, otherwise rbd_watch_cb() may end up trying to read in the image header after rbd_dev_image_release() has run: Assertion failure in rbd_dev_header_info() at line 4722: rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); Call Trace: [<ffffffff81cccee0>] ? rbd_parent_request_create+0x150/0x150 [<ffffffff81cd4e59>] rbd_dev_refresh+0x59/0x390 [<ffffffff81cd5229>] rbd_watch_cb+0x69/0x290 [<ffffffff81fde9bf>] do_event_work+0x10f/0x1c0 [<ffffffff81107799>] process_one_work+0x689/0x1a80 [<ffffffff811076f7>] ? process_one_work+0x5e7/0x1a80 [<ffffffff81132065>] ? finish_task_switch+0x225/0x640 [<ffffffff81107110>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 [<ffffffff81108c69>] worker_thread+0xd9/0x1320 [<ffffffff81108b90>] ? process_one_work+0x1a80/0x1a80 [<ffffffff8111b02d>] kthread+0x21d/0x2e0 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 [<ffffffff82022802>] ret_from_fork+0x22/0x40 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 RIP [<ffffffff81ccd8f9>] rbd_dev_header_info+0xa19/0x1e30 To fix this, a) check if RBD_DEV_FLAG_EXISTS is set before calling revalidate_disk(), b) move ceph_osdc_flush_notifies() call into rbd_dev_header_unwatch_sync() to cover rbd map error paths and c) turn header read-in into a critical section. The latter also happens to take care of rbd map foo@bar vs rbd snap rm foo@bar race. Fixes: http://tracker.ceph.com/issues/15490 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-04-15 16:22:16 +02:00
rbd: fix rbd map vs notify races A while ago, commit 9875201e1049 ("rbd: fix use-after free of rbd_dev->disk") fixed rbd unmap vs notify race by introducing an exported wrapper for flushing notifies and sticking it into do_rbd_remove(). A similar problem exists on the rbd map path, though: the watch is registered in rbd_dev_image_probe(), while the disk is set up quite a few steps later, in rbd_dev_device_setup(). Nothing prevents a notify from coming in and crashing on a NULL rbd_dev->disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 Call Trace: [<ffffffffa0508344>] rbd_watch_cb+0x34/0x180 [rbd] [<ffffffffa04bd290>] do_event_work+0x40/0xb0 [libceph] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e3ab>] worker_thread+0x11b/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810b41b3>] ? finish_task_switch+0x53/0x170 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81645dd8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 RIP [<ffffffffa050828a>] rbd_dev_refresh+0xfa/0x180 [rbd] If an error occurs during rbd map, we have to error out, potentially tearing down a watch. Just like on rbd unmap, notifies have to be flushed, otherwise rbd_watch_cb() may end up trying to read in the image header after rbd_dev_image_release() has run: Assertion failure in rbd_dev_header_info() at line 4722: rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); Call Trace: [<ffffffff81cccee0>] ? rbd_parent_request_create+0x150/0x150 [<ffffffff81cd4e59>] rbd_dev_refresh+0x59/0x390 [<ffffffff81cd5229>] rbd_watch_cb+0x69/0x290 [<ffffffff81fde9bf>] do_event_work+0x10f/0x1c0 [<ffffffff81107799>] process_one_work+0x689/0x1a80 [<ffffffff811076f7>] ? process_one_work+0x5e7/0x1a80 [<ffffffff81132065>] ? finish_task_switch+0x225/0x640 [<ffffffff81107110>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 [<ffffffff81108c69>] worker_thread+0xd9/0x1320 [<ffffffff81108b90>] ? process_one_work+0x1a80/0x1a80 [<ffffffff8111b02d>] kthread+0x21d/0x2e0 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 [<ffffffff82022802>] ret_from_fork+0x22/0x40 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 RIP [<ffffffff81ccd8f9>] rbd_dev_header_info+0xa19/0x1e30 To fix this, a) check if RBD_DEV_FLAG_EXISTS is set before calling revalidate_disk(), b) move ceph_osdc_flush_notifies() call into rbd_dev_header_unwatch_sync() to cover rbd map error paths and c) turn header read-in into a critical section. The latter also happens to take care of rbd map foo@bar vs rbd snap rm foo@bar race. Fixes: http://tracker.ceph.com/issues/15490 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-04-15 16:22:16 +02:00
rbd: get parent info on refresh Get parent info for format 2 images on every refresh (rather than just during the initial probe). This will be needed to detect the disappearance of the parent image in the event a mapped image becomes unlayered (i.e., flattened). Avoid leaking the previous parent spec on the second and subsequent times this information is requested by dropping the previous one (if any) before updating it. (Also, extract the pool id into a local variable before assigning it into the parent spec.) Switch to using a non-zero parent overlap value rather than the existence of a parent (a non-null parent_spec pointer) to determine whether to mark a request layered. It will soon be possible for a layered image to become unlayered while a request is in flight. This means that the layered flag for an image request indicates that there was a non-zero parent overlap at the time the image request was created. The parent overlap can change thereafter, which may lead to special handling at request submission or completion time. This and the next several patches are related to: http://tracker.ceph.com/issues/3763 NOTE: If an error occurs while refreshing the parent info (i.e., requesting it after initial probe), the old parent info will persist. This is not really correct, and is a scenario that needs to be addressed. For now we'll assert that the failure mode is unlikely, but the issue has been documented in tracker issue 5040. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-06 17:40:33 -05:00
rbd: fix rbd map vs notify races A while ago, commit 9875201e1049 ("rbd: fix use-after free of rbd_dev->disk") fixed rbd unmap vs notify race by introducing an exported wrapper for flushing notifies and sticking it into do_rbd_remove(). A similar problem exists on the rbd map path, though: the watch is registered in rbd_dev_image_probe(), while the disk is set up quite a few steps later, in rbd_dev_device_setup(). Nothing prevents a notify from coming in and crashing on a NULL rbd_dev->disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 Call Trace: [<ffffffffa0508344>] rbd_watch_cb+0x34/0x180 [rbd] [<ffffffffa04bd290>] do_event_work+0x40/0xb0 [libceph] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e3ab>] worker_thread+0x11b/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810b41b3>] ? finish_task_switch+0x53/0x170 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81645dd8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 RIP [<ffffffffa050828a>] rbd_dev_refresh+0xfa/0x180 [rbd] If an error occurs during rbd map, we have to error out, potentially tearing down a watch. Just like on rbd unmap, notifies have to be flushed, otherwise rbd_watch_cb() may end up trying to read in the image header after rbd_dev_image_release() has run: Assertion failure in rbd_dev_header_info() at line 4722: rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); Call Trace: [<ffffffff81cccee0>] ? rbd_parent_request_create+0x150/0x150 [<ffffffff81cd4e59>] rbd_dev_refresh+0x59/0x390 [<ffffffff81cd5229>] rbd_watch_cb+0x69/0x290 [<ffffffff81fde9bf>] do_event_work+0x10f/0x1c0 [<ffffffff81107799>] process_one_work+0x689/0x1a80 [<ffffffff811076f7>] ? process_one_work+0x5e7/0x1a80 [<ffffffff81132065>] ? finish_task_switch+0x225/0x640 [<ffffffff81107110>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 [<ffffffff81108c69>] worker_thread+0xd9/0x1320 [<ffffffff81108b90>] ? process_one_work+0x1a80/0x1a80 [<ffffffff8111b02d>] kthread+0x21d/0x2e0 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 [<ffffffff82022802>] ret_from_fork+0x22/0x40 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 RIP [<ffffffff81ccd8f9>] rbd_dev_header_info+0xa19/0x1e30 To fix this, a) check if RBD_DEV_FLAG_EXISTS is set before calling revalidate_disk(), b) move ceph_osdc_flush_notifies() call into rbd_dev_header_unwatch_sync() to cover rbd map error paths and c) turn header read-in into a critical section. The latter also happens to take care of rbd map foo@bar vs rbd snap rm foo@bar race. Fixes: http://tracker.ceph.com/issues/15490 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-04-15 16:22:16 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: fix rbd map vs notify races A while ago, commit 9875201e1049 ("rbd: fix use-after free of rbd_dev->disk") fixed rbd unmap vs notify race by introducing an exported wrapper for flushing notifies and sticking it into do_rbd_remove(). A similar problem exists on the rbd map path, though: the watch is registered in rbd_dev_image_probe(), while the disk is set up quite a few steps later, in rbd_dev_device_setup(). Nothing prevents a notify from coming in and crashing on a NULL rbd_dev->disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 Call Trace: [<ffffffffa0508344>] rbd_watch_cb+0x34/0x180 [rbd] [<ffffffffa04bd290>] do_event_work+0x40/0xb0 [libceph] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e3ab>] worker_thread+0x11b/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810b41b3>] ? finish_task_switch+0x53/0x170 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81645dd8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 RIP [<ffffffffa050828a>] rbd_dev_refresh+0xfa/0x180 [rbd] If an error occurs during rbd map, we have to error out, potentially tearing down a watch. Just like on rbd unmap, notifies have to be flushed, otherwise rbd_watch_cb() may end up trying to read in the image header after rbd_dev_image_release() has run: Assertion failure in rbd_dev_header_info() at line 4722: rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); Call Trace: [<ffffffff81cccee0>] ? rbd_parent_request_create+0x150/0x150 [<ffffffff81cd4e59>] rbd_dev_refresh+0x59/0x390 [<ffffffff81cd5229>] rbd_watch_cb+0x69/0x290 [<ffffffff81fde9bf>] do_event_work+0x10f/0x1c0 [<ffffffff81107799>] process_one_work+0x689/0x1a80 [<ffffffff811076f7>] ? process_one_work+0x5e7/0x1a80 [<ffffffff81132065>] ? finish_task_switch+0x225/0x640 [<ffffffff81107110>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 [<ffffffff81108c69>] worker_thread+0xd9/0x1320 [<ffffffff81108b90>] ? process_one_work+0x1a80/0x1a80 [<ffffffff8111b02d>] kthread+0x21d/0x2e0 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 [<ffffffff82022802>] ret_from_fork+0x22/0x40 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 RIP [<ffffffff81ccd8f9>] rbd_dev_header_info+0xa19/0x1e30 To fix this, a) check if RBD_DEV_FLAG_EXISTS is set before calling revalidate_disk(), b) move ceph_osdc_flush_notifies() call into rbd_dev_header_unwatch_sync() to cover rbd map error paths and c) turn header read-in into a critical section. The latter also happens to take care of rbd map foo@bar vs rbd snap rm foo@bar race. Fixes: http://tracker.ceph.com/issues/15490 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-04-15 16:22:16 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: fix rbd map vs notify races A while ago, commit 9875201e1049 ("rbd: fix use-after free of rbd_dev->disk") fixed rbd unmap vs notify race by introducing an exported wrapper for flushing notifies and sticking it into do_rbd_remove(). A similar problem exists on the rbd map path, though: the watch is registered in rbd_dev_image_probe(), while the disk is set up quite a few steps later, in rbd_dev_device_setup(). Nothing prevents a notify from coming in and crashing on a NULL rbd_dev->disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 Call Trace: [<ffffffffa0508344>] rbd_watch_cb+0x34/0x180 [rbd] [<ffffffffa04bd290>] do_event_work+0x40/0xb0 [libceph] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e3ab>] worker_thread+0x11b/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810b41b3>] ? finish_task_switch+0x53/0x170 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81645dd8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 RIP [<ffffffffa050828a>] rbd_dev_refresh+0xfa/0x180 [rbd] If an error occurs during rbd map, we have to error out, potentially tearing down a watch. Just like on rbd unmap, notifies have to be flushed, otherwise rbd_watch_cb() may end up trying to read in the image header after rbd_dev_image_release() has run: Assertion failure in rbd_dev_header_info() at line 4722: rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); Call Trace: [<ffffffff81cccee0>] ? rbd_parent_request_create+0x150/0x150 [<ffffffff81cd4e59>] rbd_dev_refresh+0x59/0x390 [<ffffffff81cd5229>] rbd_watch_cb+0x69/0x290 [<ffffffff81fde9bf>] do_event_work+0x10f/0x1c0 [<ffffffff81107799>] process_one_work+0x689/0x1a80 [<ffffffff811076f7>] ? process_one_work+0x5e7/0x1a80 [<ffffffff81132065>] ? finish_task_switch+0x225/0x640 [<ffffffff81107110>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 [<ffffffff81108c69>] worker_thread+0xd9/0x1320 [<ffffffff81108b90>] ? process_one_work+0x1a80/0x1a80 [<ffffffff8111b02d>] kthread+0x21d/0x2e0 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 [<ffffffff82022802>] ret_from_fork+0x22/0x40 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 RIP [<ffffffff81ccd8f9>] rbd_dev_header_info+0xa19/0x1e30 To fix this, a) check if RBD_DEV_FLAG_EXISTS is set before calling revalidate_disk(), b) move ceph_osdc_flush_notifies() call into rbd_dev_header_unwatch_sync() to cover rbd map error paths and c) turn header read-in into a critical section. The latter also happens to take care of rbd map foo@bar vs rbd snap rm foo@bar race. Fixes: http://tracker.ceph.com/issues/15490 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-04-15 16:22:16 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: fix rbd map vs notify races A while ago, commit 9875201e1049 ("rbd: fix use-after free of rbd_dev->disk") fixed rbd unmap vs notify race by introducing an exported wrapper for flushing notifies and sticking it into do_rbd_remove(). A similar problem exists on the rbd map path, though: the watch is registered in rbd_dev_image_probe(), while the disk is set up quite a few steps later, in rbd_dev_device_setup(). Nothing prevents a notify from coming in and crashing on a NULL rbd_dev->disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 Call Trace: [<ffffffffa0508344>] rbd_watch_cb+0x34/0x180 [rbd] [<ffffffffa04bd290>] do_event_work+0x40/0xb0 [libceph] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e3ab>] worker_thread+0x11b/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810b41b3>] ? finish_task_switch+0x53/0x170 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81645dd8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 RIP [<ffffffffa050828a>] rbd_dev_refresh+0xfa/0x180 [rbd] If an error occurs during rbd map, we have to error out, potentially tearing down a watch. Just like on rbd unmap, notifies have to be flushed, otherwise rbd_watch_cb() may end up trying to read in the image header after rbd_dev_image_release() has run: Assertion failure in rbd_dev_header_info() at line 4722: rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); Call Trace: [<ffffffff81cccee0>] ? rbd_parent_request_create+0x150/0x150 [<ffffffff81cd4e59>] rbd_dev_refresh+0x59/0x390 [<ffffffff81cd5229>] rbd_watch_cb+0x69/0x290 [<ffffffff81fde9bf>] do_event_work+0x10f/0x1c0 [<ffffffff81107799>] process_one_work+0x689/0x1a80 [<ffffffff811076f7>] ? process_one_work+0x5e7/0x1a80 [<ffffffff81132065>] ? finish_task_switch+0x225/0x640 [<ffffffff81107110>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 [<ffffffff81108c69>] worker_thread+0xd9/0x1320 [<ffffffff81108b90>] ? process_one_work+0x1a80/0x1a80 [<ffffffff8111b02d>] kthread+0x21d/0x2e0 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 [<ffffffff82022802>] ret_from_fork+0x22/0x40 [<ffffffff8111ae10>] ? kthread_stop+0x550/0x550 RIP [<ffffffff81ccd8f9>] rbd_dev_header_info+0xa19/0x1e30 To fix this, a) check if RBD_DEV_FLAG_EXISTS is set before calling revalidate_disk(), b) move ceph_osdc_flush_notifies() call into rbd_dev_header_unwatch_sync() to cover rbd map error paths and c) turn header read-in into a critical section. The latter also happens to take care of rbd map foo@bar vs rbd snap rm foo@bar race. Fixes: http://tracker.ceph.com/issues/15490 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-04-15 16:22:16 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00
rbd: add support for single-major device number allocation scheme Currently each rbd device is allocated its own major number, which leads to a hard limit of 230-250 images mapped at once. This commit adds support for a new single-major device number allocation scheme, which is hidden behind a new single_major boolean module parameter and is disabled by default for backwards compatibility reasons. (Old userspace cannot correctly unmap images mapped under single-major scheme and would essentially just unmap a random image, if that.) $ rbd showmapped id pool image snap device 0 rbd b100 - /dev/rbd0 1 rbd b101 - /dev/rbd1 2 rbd b102 - /dev/rbd2 3 rbd b103 - /dev/rbd3 Old scheme (modprobe rbd): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:24 /dev/rbd0 brw-rw---- 1 root disk 252, 0 Dec 10 12:28 /dev/rbd1 brw-rw---- 1 root disk 252, 1 Dec 10 12:28 /dev/rbd1p1 brw-rw---- 1 root disk 252, 2 Dec 10 12:28 /dev/rbd1p2 brw-rw---- 1 root disk 252, 3 Dec 10 12:28 /dev/rbd1p3 brw-rw---- 1 root disk 251, 0 Dec 10 12:28 /dev/rbd2 brw-rw---- 1 root disk 251, 1 Dec 10 12:28 /dev/rbd2p1 brw-rw---- 1 root disk 250, 0 Dec 10 12:24 /dev/rbd3 New scheme (modprobe rbd single_major=Y): $ ls -l /dev/rbd* brw-rw---- 1 root disk 253, 0 Dec 10 12:30 /dev/rbd0 brw-rw---- 1 root disk 253, 256 Dec 10 12:30 /dev/rbd1 brw-rw---- 1 root disk 253, 257 Dec 10 12:30 /dev/rbd1p1 brw-rw---- 1 root disk 253, 258 Dec 10 12:30 /dev/rbd1p2 brw-rw---- 1 root disk 253, 259 Dec 10 12:30 /dev/rbd1p3 brw-rw---- 1 root disk 253, 512 Dec 10 12:30 /dev/rbd2 brw-rw---- 1 root disk 253, 513 Dec 10 12:30 /dev/rbd2p1 brw-rw---- 1 root disk 253, 768 Dec 10 12:30 /dev/rbd3 (major 253 was assigned dynamically at module load time) The new limit is 4096 images mapped at once, and it comes from the fact that, as before, 256 minor numbers are reserved for each mapping. (A follow-up commit changes the number of minors reserved and the way we deal with partitions over that number.) If single_major is set to true, two new sysfs interfaces show up: /sys/bus/rbd/{add,remove}_single_major. These are to be used instead of /sys/bus/rbd/{add,remove}, which are disabled for backwards compatibility reasons outlined above. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-12-13 15:28:57 +02:00